Reinforcing Guide 2013

REINFORCINGProduct Guide

BlueScope Distribution operates from more than 50 metropolitan and

regional sites around Australia to offer a diverse range of steel products

to industries including resources, transportation, automotive, construction,

infrastructure and agriculture.

www.bluescopedistribution.com.au

BlueScope Pipeline Supplies offers a wide range of steel pipe and

fittings to service mining, fire and mechanical, utilities and rural industry

customers throughout Australasia.

www.bluescopepipelinesupplies.com.au

BlueScope Steel - Sheet Metal Supplies offers a diverse range of sheet

and coil steel products, comprising galvanised, zinc coated, aluminium

zinc coated, hot rolled, cold rolled, pre-painted, aluminised, COLORBOND®

steel and ZINCALUME® steel.

www.sheetmetalsupplies.com.au

Metalcorp Steel enjoys a strong position nationally with a growing retail

network, providing an unparalleled commitment to servicing the complete

steel needs of its customers.

www.metalcorpsteel.com.au

Our Distribution Businesses

INDEX. IIndex. Page.

Reinforcing Bar Chairs. 1

Reinforcing Bar Chairs. (Continued) 2

Reinforcing Bar Chairs and Accessories. 3

Bondek Sheeting and Accessories. 4

Crack Inducers, Dowels and Dowel Serts. 5

Dowel Sleeves and Square Dowel Bars. 6

Dowel Master and Accessories. 7

Expansion Jointing and Key Joints. 8

Key Joints and Accessories. 9

Galintels, Solid Base, Angles and Tees. 10

Building Film and Accessories. 11

Reinforcing Mesh, Bars and Trench Mesh.. 12

Reinforcing Bars. 13

Cages, Spirals and Threaded Bars. 14

Starter Bars, Joiners and Post Supports. 15

Tie Wires, Loop Ties and Tools. 16

Conversion Tables 17

Metalcorp Steel Addresses i

BlueScope Distribution, Sheet Metal Supplies and Pipeline Supplies Addresses. ii

I

Reinforcing and Associated Products.

Reinforcing Bar Chairs.

Product Code Height Std Pack Mass-kg SAP CodeCFB20 20 100 0.62 178027CFB25 25 100 0.69 168662CFB30 30 100 0.71 176165CFB32 32 100 0.72 167974CFB35 35 100 0.75 176166CFB40 40 100 0.81 167975CFB50 50 100 0.92 160405CFB65 65 100 1.10 167976CFB75 75 100 1.39 176167

CFBP40 40 100 2.31 110558CFBP50 50 100 2.70 110559

Product Code Height Std Pack Mass-kg SAP CodeCFM20 20 100 0.60 178029CFM25 25 100 0.64 176168CFM30 30 100 0.66 176165CFM32 32 100 0.70 178030CFM40 40 100 1.51 167977CFM50 50 100 1.58 137467CFM65 65 100 1.83 167978CFM75 75 100 1.96 167979

CFSBASE Plastic Base 100 2.90 178028

Product Code Height Std Pack Mass-kg SAP CodePDS20 20/25 100 0.83 178055PDS25 25/30 100 0.89 178056PDS30 30/40 100 1.11 178057PDS35 35/45 100 1.26 178058PDS40 40/50 100 1.36 178059PDS50 50/65 100 3.00 178060PDS65 65/75 100 3.60 178061PDS90 90/100 100 4.20 178062PDS110 110/120 100 4.80 178063PDS130 130/140 100 5.30 178064PDS150 150/160 100 5.90 178065PDS170 170/180 100 6.50 178066PDS190 190/200 100 7.00 178067

BCBASE130 Plastic Base 100 3.00 201549

Product Code Height Std Pack Mass-kg SAP CodeBASE152 20-140 100 5.2 155766BASE224 150-220 50 5.5 168259

PLASTIC CLIP FAST SPACERS.

PLASTIC DECK CHAIRS.

CON-BCHAIR-CLIPFAST-M*

METAL BASES.

CON-DCHAIR-PLAS*

Used in supporting top and bottom

Use for precast and tilt up panels.

CON-BCHAIR-CLIPFAST-BASE

Use for suspended slabs.

reinforcing.

Plastic Clip Fast Spacers and Deck Chairs.

CON-BCHAIR-CLIPFAST-B*

Suitable for bars 12mm to 16mm diameter.

Use for suspended slabs.

PLASTIC CLIP FAST SPACERS.

SAP Search Description.

1


Use for beams and columns.



Suitable for bars 20mm to 36mm diameter.

CON-BCHAIR-METAL-BASE*To use with wire bar chairs.

"M"style mesh support.

Reinforcing Bar Chairs. (Cont.)

Product Code Std Pack Mass-kg SAP CodeFW2012 4 - 12 100 1.00 171482FW2512 4 - 12 100 1.00 176200FW2520 16 - 20 100 1.00 179427FW3012 4 - 12 100 2.00 176201FW3020 12 - 20 100 2.00 190498FW4012 3 - 12 100 2.00 168261FW4020 12 - 20 100 2.00 176202FW5012 4 - 12 100 2.00 168262FW5020 12 - 20 100 2.00 176203FW6012 4 - 12 100 2.00 171483FW6512 8 - 12 100 2.00 100009FW7512 4 - 12 100 4.80 171484FW7520 12 - 20 100 4.80 176205

Product Code Std Pack Mass-kg SAP CodeBCPT20 200 3.00 137457BCPT25 100 2.00 110551BCPT30 100 2.00 167980BCPT40 100 2.00 137458BCPT50 100 5.00 143355BCPT65 100 6.00 137459BCPT75 100 7.00 110554BCPT80 80 100 7.50 137461BCPT90 100 8.00 176156BCPT100 100 11.00 110550BCPT110 50 5.00 155767BCPT120 50 7.00 167981BCPT130 50 8.00 137463BCPT140 50 9.00 167982BCPT150 50 10.00 155768BCPT160 50 10.00 176157BCPT170 50 11.00 176158BCPT180 25 8.00 160404BCPT190 25 8.50 176159BCPT200 25 9.00 137464BCPT210 210 25 9.00 179378BCPT220 25 9.00 167983BCPT230 25 10.00 176160BCPT240 25 10.00 137465BCPT250 25 10.00 176161BCPT260 25 11.00 176162BCPT270 270 25 11.50 100009BCPT280 25 12.00 177184BCPT290 290 25 12.50 176163BCPT300 25 12.50 137466BCPT320 25 13.50 176164BCPT340 25 14.00 178026BCPT360 25 14.50 179380BCPT380 25 15.00 100009

360

Four leg wire supports.

Used for Top and Bottom reinforcing.

Used with flat metal bases.

506575

90100110

250240230220

3040

120

140130


CON-BCHAIR-BCPT*

200190180170160150

2025

320300


Bar Size.

CON-BCHAIR-BCPT*

Used with flat metal bases. 280

260

Four leg wire supports.

Use for Top and Bottom reinforcing.

FASTWHEEL PLASTIC SPACER.

PLASTIC TIPPED WIRE CHAIRS.

Plastic Fastwheel Spacers and Slab on Ground Chairs.

2

Bar Size.

CON-FASTWHEEL*

Used to clip onto fitments.

Best used for columns and piers.

380

340

Reinforcing Bar Chairs & Accessories.

Product Code Height Std Pack Mass-kg SAP CodeSOG2540 25/40 100 2.20 110552SOG5065 50/65 100 2.50 143353

SOGC5065 Clip on 100 2.40 168171SOG5065H Slide Clip H 100 2.70 176175SOG7590 75/90 100 3.10 143354SOG85100 85/100 100 3.30 110556SOG105110 105/110 100 6.20 137452SOG115120 115/120 100 7.50 137453SOG125130 125/130 100 7.80 137454SOG135140 135/140 100 8.60 137455SOG145150 145/150 100 8.80 137456

Product Code Height Std Pack Mass-kg SAP CodeTMS65 65 25 1.20 109530

TMS6016 60 25 1.20 10009

Product Code Height Std Pack Mass-kg SAP CodeASPW25 25 125 20.00 176151ASPW30 30 100 17.00 176152ASPW35 35 100 20.00 100009ASPW40 40 75 176154ASPW45 45 75 20.00 100009ASPW50 50 60 17.00 176155ASPW55 55 50 20.00 100009ASPW60 60 40 100009ASPW65 65 40 20.00 178024ASPW70 70 30 100009ASPW75 75 30 19.00 177754ASPW80 80 25 100009ASPW85 85 25 100009CBF6550 75 25 100009

Product Code Size Bar Std Pack Mass-kg SAP CodeBARGUARD 12 to 36mm 100 3.80 137447

Product Code Bar Size Std Pack Mass-kg SAP CodeRS1220 12 to 20 50 2.35 168174RS2432 24 to 32 50 3.20 168175

REO SOKS.

Used for slabs placed on the ground.

TRENCH MESH SUPPORTS.

CONCRETE ASPRO CHAIRS.

Also suits Fence Posts/Pickets.

BAR GUARDS.

Used with trench mesh and Z cages.


Dual height concrete block spacers.

CON-BCHAIR-ASPRO*

RS2432 will also fit Star® pickets.

CON-CAP-REO-SOK*Removable safety cap.


Slab on Ground, Trench Mesh Supports & Accessories.

CON-BCHAIR-PLAS-SOG*

SLAB ON GROUND SPACERS.

50/65 Clip on50/65 Slide Clip H Base

Suitable for meshes or bar reinforcing.

3



SAP Search Description.CON-TRENCH-MESH-SUPP-ALL*

CON-CAP-BARGUARD*End cap for reinforcing bar.

BONDEK® & Accessories.

LYSAGHT BONDEK® is a high strength structural steel decking

Available in three thicknesses, BONDEK® is suitable fordomestic applications such as home units and town houses,as well as commercial construction in steel-framed and

Lengths can be custom cut to suit project requirements.

YieldFast and easy to install (590mm coverage). Strength Works as a composite slab saving on (mm) kg/m² kg/m MPa m²/tconcrete and reinforcing costs. 0.60 8.52 5.03 550 117.37

0.75 10.50 6.20 550 95.24With ribs at 200mm centres, this creates a safe 1.00 13.79 8.14 550 72.52working platform with slip resistant embossing on ribs.Installation of suspended services and ceilings without drilling into the concrete slab.Reliable interlocking mechanism provides horizontal lapping for faster installation.

Heavy duty square nut to suspendPolyethylene end plugs stop concrete and ceilings or services. Glued to a paper

strip that makes insertion easy.Threads: M8, M10 & M12Loads: 390 to 670kg

Lightweight bracket for rods to suspend ceilings or services (other than fire sprinkler systems). Max. Load: 100kg. Pressed metal threaded bracket to

suspend ceilings or services.Thread: M6 Max. Load. 270kg

Plastic trim to cover gaps formed by ribs.Used when underside of BONDEK® formsan exposed ceiling. Stock length: 3000mm Polystyrene foam stops concrete

and air from entering ends of ribs.Stock length: 1200mm

A galvanized section that creates a Required: 300mm per sheet of Bondek.

cut, mitred and screwed on site..Stock slab depths: 100(176181), 125(176182), 25mm x 1.0mm. Fixed with self-drilling hex. head.150mm(176183) (others to special order). Teks screws with drill points. 10-16 x 16Stock length: 6100mm Required: 40 per length of Edgeform.

permanent formwork at the slab edges -

Bonfill.

End Plugs.

Edgeform.

SAP Code - 179396 (Plated)

Ceiling Suspension Nut.

Acts as permanent formwork with minimal propping.Length range is 600mm to 10.000 metres.

Durable galvanized coating.

Excellent spanning capacities.Material Specifications.

Thickness SAP Code

BONDEK® Decking.

4

concrete-framed buildings.

manufactured from zinc coated steel to AS1397.

181217

Bonwedge.

Bonstrip.

181219

BONDEK® Accessories.

air from entering the end of the ribs.

Brackets from builders strapping.

Mass Coverage

181218

Bon-nut

BONDEK®

Crack Inducers, Dowels & Dowel Serts.

Product Code Description Dimension SAP CodeDYCRAK253 Plain 25 x 3000 168169

DYCRAK453 Plain 45 x 3000 168170

Product Code Description Colour SAP CodeDYCRAK253B Rip a Strip Black 176191

DYCRAK453B Rip a Strip Black 178052

Product Code Description Dimension SAP CodeDYGCRAK25 Plastic Strip 3000 x 150 100009

Product Code Bar Size Length SAP CodeDL16450FC 16 450 162809DL16600FC 16 600 178597DL20450FC 20 450 178711DL20600FC 20 600 171792

Product Code Bar Size Length SAP CodeDL16450FCD 16 450 178608DL16600FCD 16 600 178609DL20450FCD 20 450 178612DL20600FCD 20 600 178613

Product Code Bar Size Length SAP CodeDWLSERT16 16 200 162833DWLSERT20 20 300 162834

Product Code Bar Size Std Pack SAP CodeCONCAP12 12 100 109516CONCAP16 16 100 167973CONCAP20 20 100 137469CONCAP24 24 100 176197

CON-CRACK-IND-CAP-BLK-45-0300

DOWEL BARS Hot Dipped Galvanized.

DOWEL SERTS.


Hot dipped galvanized round bar used to control movement in joints of concrete slabs. GR250R friction cut.

REO-DOWEL-R250N-BLK-FC-16-450




Crack Inducers, Dowels & Dowel Serts.

CON-CRACK-IND-45-03000

CON-CRACK-IND-CAP-BLK-25-0300

CON-CRACK-IND-25-03000


SAP Search Description.CRACK-A-JOINT®

CRACK-A-JOINT®.Surface crack control strips for small pours.

5

CON-EXP-CAP-16

CON-DOWEL SERT-20-300-600


A plastic cap with a hinged end, to fit over a round bar, creating a void at the end of the dowel bar.

REO-DOWEL-R250N-HDGAL-FC-16-450

DOWEL EXPANSION CAPS.

Black round bar used to control movements in joints of concrete slabs. Grade 250R friction cut.

CON-EXP-CAP-24




CON-DOWEL-SERT-16-200-400

Nail on, two part, black plastic sleeve for dowels.

Fluted preformed metal crack inducer designed to induce a crack along the strip as concrete cures.

CON-EXP-CAP-20


CON-EXP-CAP-12

No Known Code.SAP Search Description.

CRACK INDUCER ON GROUND.

DOWEL BARS.

Designed to induce a crack in floor slab from the ground up. Up to 200mm slabs.


Dowel Sleeves & Square Dowel Bars.

Product Code SAP CodeKJUDS16R 179461KJUDS20R 179462KJUDS16S 192458KJUDS20S 192459KJUDSB 179460

Product Code SAP CodeSSR1623 181161SSR1630 181162SSR2023 100009SSR2030 181164SSNP16 181159SSNP20 181160

Product Code SAP Code Photos for illustration.DQ16300FC 100009DQ16400FC 178586DQ16450FC 178587DQ16500FC 178588DQ16600FC 100009DQ20300FC 100009DQ20400FC 177044DQ20450FC 100009DQ20500FC 177045DQ20600FC 191653DQ25300FC 100009DQ25400FC 100009DQ25500FC 100009DQ25600FC 100009

Product Code SAP Code Photos for illustration.DQ16400FCD 178589DQ16450FCD 100009DQ16500FCD 100009DQ16600FCD 100009DQ20400FCD 100009DQ20450FCD 100009DQ20500FCD 177046DQ20600FCD 178590DQ25400FCD 100009DQ25500FCD 100009DQ25600FCD 100009 Friction cut.

No Known Code.

REO-DOWEL-MS-BLK-FC-SQ-20-500

20 x 300

25 x 400

20 x 60025 x 300

20 x 40020 x 450

16 x 50016 x 450

25 x 500

Black square dowel bar friction cut dowels used to control movement in joints of concrete slabs.SQUARE DOWEL BARS Hot Dipped Galvanized.

20 x 400

Dowel Sleeves & Square Dowel Bars.

6

Description

CON-KEY-JNT-DOWEL-SLV-RD-20

CON-DOWEL-SPEED-SLV-RD-16-240



REO-DOWEL-MS-HDGAL-FC-SQ-20-500

25 x 600

16 x 300 Round

25 x 500

20 x 50020 x 450

25 x 600

16 x 400

25 x 40020 x 600

Description

16 x 600

20 x 300 Round

SAP Search Description. Description16 x 240 Round

20 x 240 Round16 x 310 Round

Round dowel sleeves with reusable nailing plates.

16 - Nail Plate20 - Nail Plate

SQUARE DOWEL BARS - Black.

CON-DOWEL-SPEED-SLV-RD-NAIL-PL-20

16 x 600

Description16 x 300

16 x 450REO-DOWEL-MS-BLK-FC-SQ-16-450

No Known Code.


No Known Code.

Hot Dipped Galvanized dowels as above.



No Known Code.

No Known Code.


No Known Code.

No Known Code.


No Known Code.

No Known Code.

No Known Code.

No Known Code.No Known Code.


No Known Code.

No Known Code.

DOWEL SPEED SLEEVES.

No Known Code.

16 x 400

20 x 500

16 x 500

CON-DOWEL-SPEED-SLV-RD-16-310

CON-DOWEL-SPEED-SLV-RD-20-310CON-DOWEL-SPEED-SLV-RD-20-240


CON-DOWEL-SPEED-SLV-RD-NAIL-PL-16

DOWEL SLEEVES UNIVERSAL.

Full length dowel sleeve suitable for joining applications. Available for round or square dowels and colour coded.

16 x 300 SquareCON-KEY-JNT-DOWEL-SLV-SQ-1620 x 300 Square

50 MF Boot

CON-KEY-JNT-DOWEL-SLV-RD-16

CON-KEY-JNT-DOWEL-SLV-SQ-20CON-KEY-JNT-DOWEL-SLV-BOOT

20 x 300 Round

Dowelmaster® and Dowel Accessories.

Product Code Description Std Pack SAP CodeDLMASTER16 Square 16 100 100009DLMASTER20 Square 20 100 100009

NAILPLT16 Nail Plate 16 100 176935NAILPLT20 Nail Plate 20 100 180062

Pictures are for illustration

Product Code Description Std Pack SAP CodeDYDCM16200 16 x 200 100 176192DYDCM16250 16 x 250 100 100009DYDCM16300 16 x 300 100 100009DYDCM20200 20 x 200 100 100009DYDCM20250 20 x 250 100 176193DYDCM20300 20 x 300 100 100009DYDCM25200 25 x 200 100 100009DYDCM25250 25 x 250 100 100009DYDCM25300 25 x 300 100 100009


Product Code Description Std Pack SAP CodeDYDD06B 110 x 6 Blk 1 100009DYDD06G 110 x 6 Gal 1 100009DYDD10B 110 x 10 BLK 1 100009DYDD10G 110 x 10 Gal 1 100009

DDKB110625 110 x 6 Blk 25 100009DDKG110625 110 x 6 Gal 25 100009DDKB111015 110 x 10 Blk 15 100009DDKG111015 110 x 10 Gal 15 100009


Product Code Description Dimension SAP CodeDYPC6154B Black 3000 x 6 193052

DYPC6154G Galvanized 3000 x 6 100009


Product Code Description Dimension SAP CodePFORM060 Pecaform 600 x 2400 100009PFORM090 Pecaform 900 x 2400 100009PFORM120 Pecaform 1200x2400 100009PFORM150 Pecaform 1500x2400 100009PFORM180 Pecaform 1875x2400 100009


FORMWORK PRODUCTS - Pecaform™SAP Search Description.

Flat steel wire mesh with heat shrunk polyethylene applied. An alternative to conventional formwork.

SAP Search Description.No Known CodeNo Known CodeNo Known CodeNo Known CodeNo Known CodeNo Known Code

Diamond® Dowels & Sleeves.

No Known Code

No Known Code

No Known Code

Square metal cover for square dowels.

Dowelmaster® and Dowel Accessories.

No Known Code

GEN-MISC-PLATE-NAIL-DOWELMSTR-20

No Known Code

No Known Code


Square plastic sleeve for square steel dowels.

Dowelmaster®.

DOWEL COVERS SQUARE METAL.


7

CON-KEY-JNT-DOWEL-CRADLE-PL-150

GEN-MISC-PLATE-NAIL-DOWELMSTR-16

6mm dowels @ 450mm centres. 150mm slab

CON-DOWEL-CVR-SQ-16-200

CON-DOWEL-CVR-SQ-20-250

No Known Code

No Known Code

No Known Code

No Known CodeNo Known Code

Standard configuration 6mm dowels at 450mm centres.

DOWEL PLATE CRADLES.SAP Search Description.

High performance steel plate dowel cradle system for concrete slab joints.

High performance steel plate dowel system for joints in concrete slabs.Sleeve acts as nail plate with nails already inserted ready for easy use.

No Known CodeNo Known CodeNo Known CodeNo Known CodeNo Known Code

Expansion Jointing & Key Joints.

Product Code DescriptionJFP1075 PlainJFP10100 Plain

CON-JF-FOAM-PLAIN-010-125-25000-176216 JFP10125 PlainJFP10150 PlainJFP10200 PlainJFZ1075 ZippedJFZ10100 ZippedJFZ10125 ZippedJFZ10150 ZippedJFZ10200 ZippedZFA1075 AdhesiveZFA10100 AdhesiveZFA10125 AdhesiveJFA10150 AdhesiveJFA10200 Adhesive

Product Code DescriptionJF1075 Stiff JointJF10100 Stiff Joint

Product Code DescriptionKJC100 Key JointKJC150 Key JointKJC200 Key JointKJC300 Key Joint

KJCWEDGE WedgeKJCPEG350 Peg & WedgeKJCPEG400 Peg & WedgeKJCPEG500 Peg & Wedge

Product Code DescriptionKJCCPB25 Black w/strip

KJCCRG25 GreyKJCCRG6 Grey

Product Code DescriptionKJRM12 Yellow Rigid KJRM20 Grey Rigid

CON-KEY-JNT-8PW-200-6000 - 155772CON-KEY-JNT-8PW-300-6000 - 179457

Galvanized sheet metal profile used in forming contraction joints in concrete footpaths, using a peg & wedge.

PVC Capping Permanent.

500 (8)CON-KEY-JNT-PEG-WEDGE-400-QTY8 - 178082

CON-JF-ADH-010-150-25000 - 176214CON-JF-ADH-010-200-25000 - 178073

STIFF EXPANSION JOINT.

KEY JOINTS & ACCESSORIES.

A flexible foam for joints in concrete slabs.

2440 x 75 x 10CON-JF-DRY-010-100-02440 - 179443

25mx125mmx10mm

CON-JF-FOAM-ZIP-010-200-25000 - 178078No Known Code - 100009

No Known Code - 100009

25mx100mmx10mm

25mx200mmx10mm

CON-JF-ADH-010-125-25000 - 192381

CON-JF-FOAM-ZIP-010-100-25000 - 178075


25mx150mmx10mm

25mx75mmx10mm


FLEXIBLE EXPANSION JOINTING.

25mx100mmx10mm25mx125mmx10mm

25mx125mmx10mm

25mx200mmx10mm25mx75mmx10mm25mx100mmx10mm

25mx75mmx10mm

25mx150mmx10mm

Expansion Jointing & Key Joints.

350 (8)150 (8)

6000 x 3006000 x 2006000 x 150

SAP Search Description - SAP Code.

CON-KEY-JNT-8PW-100-6000 - 155771

L x W x t


8

L x W x tCON-JF-FOAM-ZIP-010-075-25000 - 178074

CON-JF-FOAM-ZIP-010-150-25000 - 178077



25mx150mmx10mm25mx200mmx10mm

CON-JF-ADH-010-075-25000 - 190583CON-JF-ADH-010-100-25000 - 176213

CON-JF-DRY-010-075-02440 - 179442

CON-KEY-JNT-PEG-WEDGE-150-QTY8 - 176223CON-KEY-JNT-PEG-WEDGE-350-QTY8 - 100009

PVC Capping Removable.

6000 x 100


2440 x 100 x 10

Dimension

A bitumen impregnated stiff fibrous material used in joints in concrete slabs.

CON-KEY-JNT-8PW-150-6000 - 137475

PVC Rebate Moulds.

400 (8)No Known Code - 100009


24m x 9mm x 13mmA rebate mould with a strippable capping.

6.0mx12mmx14mm24mx7.5mmx10mm

Dimension




3.0mx12mmx12mmSAP Search Description - SAP Code. Dimension

3.0mx10mmx20mm

A removable rebate mould.

CON-KEY-JNT-REBATE-MLD-12-12 - 176224

Key Joints & Accessories.

Product Code Description DimensionKJFC100 100mm 6mx30mmx12mmKJFC150 150mm 6mx40mmx12mmKJFC200 200/300mm 6mx50mmx12mm

Picture for illustration.

Product Code Description DimensionKJFXJ1024 Profile & foam 2400 x 100KJFX1030 Profile & foam 3000 x 100KJFXJDS Sleeve/foot


Product Code Description DimensionKJD100 Key joint 3.0m x 100 (10)KJD100 Key joint 6.0m x 100 (10)KJD125 Key joint 3.0m x 125 (10)KJD150 Key joint 6.0m x 150 (10)KJD200 Key joint 6.0m x 200 (10)


Product Code Description DimensionKJDRS25B Black 25m (2) - 155769KJDRS25G Grey 25m (2) - 171337KJDCR25 Rem Std 25m x 10mm (2)


Product Code Description DimensionKJDPEG350 Stakes 10 x 350 (8)KJDPEG450 Stakes 10 x 450 (8)KJDPEG550 Stakes 10 x 550 (8)


Product Code Description DimensionKJDEXP100 Expanda joint 3m x 100mm (10)KJDEXP125 Expanda joint 3m x 125mm (10)KJDEXP150 Expanda joint 3m x 150mm (10)KJDEXP200 Expanda joint 3m x 200mm (10)KJDEXP250 Expanda joint 3m x 250mm (10)

Picture for illustration. Expanda joint is a standard Key Joint with 5mm closed-cell foamon the inside allowing a continuous pour each side of the joint.

Galvanized sheet metal profile used in forming contraction joints using a drive and twist stake system.

EXPANDA JOINT.


No Known Code - 100009No Known Code - 100009

CON-KEY-JNT-4PW-100-06000 - 205205

No Known Code - 100009No Known Code - 100009

SAP Search Description - SAP Codes.


9


CON-KEY-JNT-4PW-125-03000 - 203797





KEY JOINT.

KEY JOINT CAPPING.

STAKES.

Key Joints & Accessories.

CON-KEY-JNT-FILLER-150-06000 - 168167



FOAM FILLER STRIPS.

EXPANSION JOINT.



CON-KEY-JNT-CAP-REM - 155769



CON-KEY-JNT-CAP-REM-GRY-07-10-25000CON-KEY-JNT-CAP-PERM-BLK-10-12-25000

CON-KEY-JNT-4PW-200-03000 - 203799CON-KEY-JNT-4PW-150-03000 - 203798


CON-KEY-JNT-4PW-100-03000 - 203796

Galintel® - Solid Base & Rendabar Angles.

* NB. All weights shown are approximate.Product Code kg/len SAP Code

GLIN8F85 4.00 138288GLIN9F85 4.50 138289GLIN10F85 5.00 138290GLIN11F85 5.50 138291GLIN12F85 6.00 138292

Product Code kg/len SAP CodeGLIN12A100 10.70 138259GLIN15A100 14.25 138260GLIN18A100 17.10 138261GLIN21A100 19.95 138262GLIN24A100 22.80 138263GLIN27A100 25.65 138264

Product Code kg/len SAP CodeGLIN18A150 21.60 144088GLIN21A150 25.20 138273GLIN24A150 28.80 138274GLIN27A150 32.40 138275GLIN30A150 36.00 138276GLIN33A150 39.60 138277GLIN36A150 43.20 138278GLIN40A150 48.00 138279

Galintel® - RENDABAR ANGLE 100x100x8mmProduct Code kg/len SAP Code

REN09A100 7.20 138266REN12A100 9.60 138267REN15A100 12.00 138268REN18A100 14.40 138269REN21A100 16.80 138270REN24A100 19.20 138271

Galintel® - RENDABAR ANGLE 150x100x8mmProduct Code kg/len SAP Code

REN18A150 17.64 182649REN21A150 20.58 138281REN24A150 23.52 138282REN27A150 26.46 138283REN30A150 29.40 138284REN33A150 32.34 138285REN36A150 35.28 138286REN40A150 39.20 17929815

Length1.800m2.100m2.400m2.700m3.000m3.300m3.600m4.000m

15151515

Qty/bundle151515

25252525

1.500m1.800m2.100m2.400m

Qty/bundleLength900mm1.200m

2525

4.000m

1515151515151515

2.700m

3.300m3.600m

Length1.800m2.100m2.400m

25

Length 800mm

3.000m

900mm1.000m

Galintel® is a cold rolled flat bar providing recesses for mortar.

1.100m1.200m

25

Galintel® - ANGLES. 100x100x6mm

Galintel® - ANGLES. 150x100x6mm

2525

Galintel® is a cold rolled angle bar providing recesses for mortar.Used in the formation of composite beams in brick veneer construction.

Length1.200m1.500m

LINFL-85-8-MRS-GAL-01200

LINAN-100-100-06-MRS-GAL-01500

LINAN-100-100-06-MRS-GAL-02100

SAP Search Description.LINAN-100-100-06-MRS-GAL-01200

LINAN-150-100-6-MRS-GAL-04000


LINAN-100-100-8-REN-GAL-01500LINAN-100-100-8-REN-GAL-01800

LINAN-100-100-8-REN-GAL-02400

Galintel® - Solid Base & Rendabar Angles. Hot Dipped Galvanized.


LINFL-85-8-MRS-GAL-01000LINFL-85-8-MRS-GAL-01100

Galintel® - FLATS.Qty/bundle

25

2525

LINAN-150-100-8-REN-GAL-02100LINAN-150-100-8-REN-GAL-02400

1.800m2.100m

LINAN-150-100-8-REN-GAL-01800

LINAN-150-100-6-MRS-GAL-01800

LINAN-150-100-6-MRS-GAL-02400LINAN-150-100-6-MRS-GAL-02700LINAN-150-100-6-MRS-GAL-03000

LINAN-150-100-6-MRS-GAL-03600

10



LINAN-150-100-6-MRS-GAL-02100

LINAN-150-100-8-REN-GAL-02700

2.400m2.700m

2525

LINAN-100-100-06-MRS-GAL-02400

LINAN-150-100-8-REN-GAL-04000

LINAN-100-100-06-MRS-GAL-02700

LINAN-100-100-06-MRS-GAL-01800

Qty/bundle

2525

Qty/bundle

LINAN-150-100-8-REN-GAL-03600



LINAN-150-100-6-MRS-GAL-03300

LINAN-150-100-8-REN-GAL-03300

LINAN-100-100-8-REN-GAL-00900

LINAN-100-100-8-REN-GAL-02100

LINAN-100-100-8-REN-GAL-01200

LINAN-150-100-8-REN-GAL-03000

Galintel® is a cold rolled angle bar providing recesses for mortar.

Galintel® is a cold rolled angle bar providing recesses and slots to facilitaterendering onto composite beams in brickwork.

Used in the formation of composite beams in brick veneer construction.

Building Products & Accessories.

Product Code Length mm DimensionGLINT27 2700 200 x 200 x 7GLINT30 3000 200 x 200 x 7GLINT33 3300 200 x 200 x 7GLINT936 3600 200 x 200 x 9GLINT939 3900 200 x 200 x 9GLINT942 4200 200 x 200 x 9GLINT945 4500 200 x 200 x 9GLINT951 5100 200 x 200 x 9GLINT954 5400 200 x 200 x 9GLINT957 5700 200 x 200 x 9

Photos for illustration GLINT960 6000 200 x 200 x 9

Product Code Description SAP CodeFS3425 Orange Super 176241FO2633 Arcon Premium 100009FO2250 Orange Polythene 100009FO2450 Orange Polythene 176239FP2250 Orange Premium 100009FP2450 Orange Premium 176240FB2250 Black Polythene 100009FB2450 Black Polythene 137468

FBHI2250 Black High Impact 178086FBHI2450 Black High Impact 176238TPVC30 Grey Duct Tape 137481

Product Code Height SAP CodePOD150 175 179472POD175 175 176234POD225 225 176235POD300 300 176236POD375 375 176237

Product Code Dimension SAP CodePODSPA2 100 - 110 (25) 176231PODSPA4 100 - 300 (25) 176230

PODRAIL40 40 x 600 (25) 179471Plastic multi purpose beam spacers.

Galintel® MULTI-RIB T BAR.

POLYTHENE BUILDING FILM.

POLYSTYRENE VOID FORMERS.

CON-POD-SPCR-EDGE-2WAY

Moisture barrier and sealing tape used in slab on ground construction.

Galintel® T section is a cold rolled lintel bar providing recesses for mortar.Used in the formation of composite beams in cavity brick wall construction supporting both skins of brickwork.


CON-POD-VOID-1090-1090-375A void former manufactured from expanded polystyrene used on ground concrete raft slabs.

PLASTIC SPACERS.

CON-POD-VOID-1090-1090-150

CON-POD-VOID-1090-1090-225CON-POD-VOID-1090-1090-300

CON-POD-VOID-1090-1090-175

11

SAP Code - SAP Search Description.

CON-POD-SPCR-4WAY

140222 - TBAR-2009-2009-MRS-GAL-5700

CON-POLY-SUPR-300UM-ORNG-4000-25000No Known CodeNo Known Code

CON-POLY-IND-200UM-ORNG-4000-50000

No Known Code

CON-POD-SPCR-PODFIX


Galintel® Tees - Uniflow Drainage & Building Products Accessories.

140217 - TBAR-2007-2007-MRS-GAL-3000

180136 - TBAR-2009-2009-MRS-GAL-3900

140216 - TBAR-2007-2007-MRS-GAL-2700

177058 - TBAR-2009-2009-MRS-GAL-3600


CON-POLY-PREM-200UM-ORNG-2000-50000CON-POLY-PREM-200UM-ORNG-4000-50000

140218 - TBAR-2007-2007-MRS-GAL-3300

180136 - TBAR-2009-2009-MRS-GAL-4200

140220 - TBAR-2009-2009-MRS-GAL-5100

GEN-TAPE-JOINING-PVC-GRY-50-30000

178629 - TBAR-2009-2009-MRS-GAL-4500

140221 - TBAR-2009-2009-MRS-GAL-5400

152763 - TBAR-2009-2009-MRS-GAL-6000

CON-POLY-IND-200UM-BLK-4000-50000CON-POLY-HI-IMP-200UM-BLK-2000-50000CON-POLY-HI-IMP-200UM-BLK-4000-50000

Reinforcing Mesh & Bars, Trench Mesh.

Product Long Cross Weight Pack SAP Photo forCode Wire mm Wire mm kg Size Number illustration.

RL1218 11.9 @ 100 7.6 @ 200 157 10 152255RL1118 10.65 @ 100 7.6 @ 200 131 15 156254RL1018 9.5 @ 100 7.6 @ 200 109 15 161352RL918 8.55 @ 100 7.6 @ 200 93 20 138332RL818 7.6 @ 100 7.6 @ 200 79 20 109282RL718 6.75 @ 100 7.6 @ 200 68 20 138331

Product Long Cross Weight Pack SAP Photo forCode Wire mm Wire mm kg Size Number illustration.SL81 7.6 @ 100 7.6 @ 100 105 20 109281SL102 9.5 @ 200 9.5 @ 200 80 20 156265SL92 8.55 @ 200 8.55 @ 200 65 20 109285SL82 7.6 @ 200 7.6 @ 200 52 30 109283SL72 6.75 @ 200 6.75 @ 200 40 40 109280SL62 6.0 @ 200 6.0 @ 200 33 50 101856SL52 4.75 @ 200 4.75 @ 200 21 50 109279

Product Width Weight Pack SAP Photo forCode mm kg Size Number illustration.

L8TM3 200 3 7 40 109291L8TM4 300 4 9 40 138335L8TM5 400 5 11 30 156266L11TM3 200 3 13 30 109286L11TM4 300 4 18 30 109287L11TM5 400 5 22 30 109288L12TM3 200 3 16 30 109589L12TM4 300 4 22 30 109290

Product Stock SAP LengthCode Length (m) Number per tN12S6 6.0 100095 1088 181N12S9 9.0 136814 1088 121N16S6 6.0 100111 612 102N16S9 9.0 100113 612 68N16S12 12.0 153936 612 51N20S12 12.0 136818 392 32N24S12 12.0 110947 272 23N28S12 12.0 143009 200 17N32S12 12.0 150191 153 13N36S12 12.0 176288 121 10

No. Wires

MESH-REO-RL818-BLK-D500L-2400-6000

DB-12-D500N-6000

m/t

MESH-TRENCH-L11TM4-BLK-D500L-300-6000MESH-TRENCH-L11TM5-BLK-D500L-400-6000MESH-TRENCH-L12TM3-BLK-D500L-200-6000

MESH-TRENCH-L8TM3-BLK-D500L-200-6000

RECTANGULAR RIBMESH.

SQUARE RIBMESH.

TRENCH MESH.

REINFORCING BAR.

DB-32-D500N-12000DB-36-D500N-12000

DB-20-D500N-12000

MESH-TRENCH-L12TM4-BLK-D500L-300-6000

DB-16-D500N-9000

Reinforcing Meshes RL & SL - Trench Meshes - Reinforcing Bar. AS/NZS 4671

MESH-REO-SL52-BLK-D500L-2400-6000


DB-16-D500N-6000







12




DB-24-D500N-12000DB-28-D500N-12000

DB-16-D500N-12000

DB-12-D500N-9000

Photo forillustration purposes.

MESH-TRENCH-L8TM4-BLK-D500L-300-6000MESH-TRENCH-L8TM5-BLK-D500L-400-6000MESH-TRENCH-L11TM3-BLK-D500L-200-6000


MESH-REO-SL102-BLK-D500L-2400-6000MESH-REO-SL92-BLK-D500L-2400-6000



Reinforcing Bars.

Product Length Metres LengthsCode mm per t per tS12S6 6000 1088 181S12S9 9000 1088 121

Product Length Metres LengthsCode mm per t per tR6S6 6000 3691 619R10S6 6000 1559 261R12S6 6000 1083 181R16S6 6000 609 102R20S6 6000 390 65R24S6 6000 271 45

Product Bar Size &Code Shape

SB1012H R10 Safety HookSB1012H R10 LSB120820 N12 LSB121020 N12 LSB12010 N12 Safety HookSB121215 N12 LSB121000 N12 StraightSB121200 N12 StraightSB121500 N12 StraightSB122000 N12 StraightSB123000 N12 Straight

Product Bar Size &Code Degree of bend

CB1205 N12 90 degreeCB1206 N12 90 degree

CB120545 N12 45 degreeCB120645 N12 45 degreeCB1606 N16 90 degreeCB1607 N16 90 degree

Photos are for CB10745 N16 45 degreeillustration purposes.

700 x 700700 x 700

(mm)

500 x 500600 x 600500 x 500

2000

1000x150x100

1000x150x120

1500

1000178559 - REO-BAR-START-D500N-12-1200

600 x 600

100009 - No known code(mm x mm)

Standard cut and bent deformed bar Grade D500N bar to AS/NZS 4671.

100009 - No known code100009 - No known code

1200

100009 - No known code

1200 x 150

Standard cut and deformed bar Grade D500N bar to AS/NZS 4671.

Round bar Grade R250N to ASNZS 4671.

178564 - REO-BAR-START-D500N-12-2000


CORNER BARS.

STARTER BARS.

143358 - REO-BAR-START-D500N-12-1000-200

178560 - REO-BAR-START-D500N-12-1200-150178557 - REO-BAR-START-D500N-12-1000

13

178569 - REO-BAR-START-R250N-10-1000-2001000 x 200800 x 2001000 x 200

600 x 600

3000

Dimension

178558-REO-BAR-START-D500N-12-1000-150-100H


SWIMMING POOL REINFORCING BAR

REINFORCING PLAIN ROUND BAR.

Grade D250N deformed bar to AS/NZS 4671. Used in the construction of swimming pools.

176994 - RD-010.00-R250N-06000177003 - RD-012.00-R250N-06000

177017 - RD-024.00-R250N-06000

Dimension

179992 - RD-006.50-R250N-06000

Reinforcing Bars - Starter Bars - Corner Bars. AS/NZS 4671.

136814 - DB-12-D250N-09000143004 - DB-12-D250N-06000




143357-REO-BAR-START-D500N-12-0800-200

196087-REO-BAR-START-R250N-10-1000-120-150H

178563 - REO-BAR-START-D500N-12-1500


178565 - REO-BAR-START-D500N-12-3000


177008 - RD-016.00-R250N-06000177013 - RD-020.00-R250N-06000

Cages, Spirals & Threaded Bars.

Product Photos are forCode Bottom illustration purposes.

Z17X20410 200 L8TM3Z17X30410 300 L8TM3Z17X40410 400 L8TM3Z17X20412 200 L8TM4Z17X30412 300 L11TM3Z17X40412 400 L11TM4Z17X30810 300 L11TM3Z17X30610 300 L11TM3Z17X40810 400 L11TM3Z17X30811 300 L11TM4Z17X40811 400 L11TM4

Product Width x Photos are forCode Height (mm) illustration purposes.

TZ30X20808 300 x 200 L8TM4TZ30X30808 300 x 300 L8TM4TZ30X20811 300 x 200 L11TM4TZ30X30811 300 x 300 L11TM4TZ20X40608 200 x 400 L8TM3TZ20X30611 200 x 300 L11TM3TZ20X40611 200 x 400 L11TM3TZ20X30612 200 x 300 L12TM3TZ20X40612 200 x 400 L12TM3

SAP Code

178677178678178679178680178681

Product Length SAP Code mm mm Code

TRZM1224 2400 178576TRZM1227 2700 478577TRZM1230 3000 178578TRZM1236 3600 180128TRZM1624 2400 178579TRZM1627 2700 178580TRZM1630 3000 178581

SPIRALS.

WZ-FOOTING CAGES.

Z-FOOTING CAGES.

Prefabricated cages 6.0m long used in footings. Substitution for trench mesh and ligatures.

Prefabricated trench mesh cages 6.0m long used in footings.


100009 - No Known Code

L11TM4



RBW6M0SP25RBW6M0SP30

200250300

170


RBW6M0SP17RBW6M0SP20

CodeWIRE-06.00-BRT-RIB-SPIRAL-40T-170WIRE-06.00-BRT-RIB-SPIRAL-40T-200

mmDiameterProduct

WIRE-06.00-BRT-RIB-SPIRAL-40T-450 450RBW6M0SP45

REO-BAR-THR-SA5-12-2700

Manufactured from deformed wire 500 MPa L Grade to AS/NZS 4671. THREADED ROD - metric thread.

REO-BAR-THR-SA5-16-2400REO-BAR-THR-SA5-16-2700



100009 - No Known Code100009 - No Known Code




WIRE-06.00-BRT-RIB-SPIRAL-40T-300







161616

12

12


L8TM3

L12TM3L12TM3

L11TM3100009 - No Known CodeL11TM3

L11TM4

14

L11TM3

Bottom


1212

Diameter mm



WIRE-06.00-BRT-RIB-SPIRAL-40T-250

Cages - Spirals - Threaded Bars.

L8TM3L8TM3L8TM3

Substitution forTopSAP Code - SAP Search Description. Height


L8TM4

L8TM4L8TM4

L11TM3L11TM4

Top

L11TM4L11TM4

L8TM3

L11TM3

Starter Bars, Joiners and Post Supports.

Product Dimension Diameter Bag Code mm mm Qty

SBLZM12180 180 x 50 12 50SBLZM12200 200 x 150 12 50SBLZM12300 300 x 50 12 50SBLZM16180 180 x 50 16 50SBLZM16200 200 x 150 16 50

Product SAPCode Number

COUPLERZ12 162749COUPLERZ16 162748


NUTZ12Z 137539NUTZ16Z 137540

Product Dimension Diameter SAPCode mm mm Number

WASHR12Z 50 x 50 x 3 12 178488WASHR16Z 50 x 50 x 3 16 143365

Items may not be stocked at all outlets.

Product Length Post SizeCode mm mm

U Bracket 300 100 sqU Bracket 450 100 sqU Bracket 600 100 sq

Shark Fin Shaft 200 100 sqShaft 300 100 sq

Shark Fin 310U Bracket Shaft Post Foot Post Foot 410

HEXAGON NUTS.

HEXAGON COUPLERS.

SQUARE WASHERS.

Starter Bars - Joiners - Post Supports.


178572 - REO-BAR-START-THR-SA5-12-180-050




SLAB STARTER BARS.

Cut and bent bar with a threaded end.178575 - REO-BAR-START-THR-SA5-16-200-150

15

CON-COUP-HEX-ZP-16

GEN-FAST-HEX-NUT-ZP-16


195571 - GEN-POST-SUPPORT-50-100-600100009 - No Known Code

mmDiameter

Bolt on, embedded in concrete and COLORBOND® steel post support variations.

CON-COUP-HEX-ZP-12mm1216

SAP Search Description.Diameter

Used in conjunction with threaded bars.

Used in conjunction with threaded bars and bolts.


GEN-FAST-FLT-WASHER-ZP-SQ-50-3-12

1216

GEN-FAST-HEX-NUT-ZP-12


Used in conjunction with threaded bars and bolts.

Photos are forPOST SUPPORTS.

illustration purposes.

Hot dipped galvanized steel brackets for attaching timber posts in domestic applications.


GEN-FAST-FLT-WASHER-ZP-16



For use with COLORBOND® steel Fencing.185405 - FEN-FI-POST-BRT-SHARK-FIN-150-100-GAL


Tie Wires, Loop Ties and Tools.

Product Diameter SAPCode mm Number

TWA1M603 1.6 157336TWA1M605 1.6 140464TWA1M610 1.6 140466AWCL1M6 1.57 100009AWCL3M2 3.15 198474

Coils of black annealed tie wire used as a steel fixing aid.

Product Length SAPCode mm NumberLT110 110 150727LT125 125 110561LT150 150 137479LT200 200 176227

LTHP110 110 176225LTHP125 125 200 176226LTHP150 150 179468LTG110 110 157883LTG125 125 176228LTG150 150 169632LTG200 200 176229


IDLREEL 188620IDLNYBELT 176250

IDLBELT 176249IDLCOILA14 100009IDLCOILA 100009IDLCOILG 100009TWSTLN 153683

NIPP8 176928NIPP200 100009No Known Code

LOOP TIES.

REEL, BELT & TOOLS.

1.57mm Galv tie wire coil for reel.

CON-TIE-IDL-BELT-LTRNo Known CodeNo Known Code

Reinforcing Notes.

Tools used in steel fixing may change or be deleted over time. Please check..

Qty perRoll

20002000

CON-MISC-BELT-PACK-HOLDER


1.57mm black tie wire coil for reel.No Known Code

16

CON-LT-GAL-1.57-150

GEN-WIRE-TIE-CYCLONE-TOOL

Description

Aluminium reel for tie wire.Wide nylon belt & buckle for reel.

Twisting tool with long handle.

CON-LT-GAL-1.57-200

Knippex Nippers 200mm.

2000

2000

CON-LT-BLK-1.6-110

GEN-MISC-NIPP-EC-200

2000

CON-TIE-IDL-BELT-NLN

CON-LT-BLK-1.6-150

CON-LT-GAL-1.57-110

2000

Tie wires with loops used as a steel fixing aid.

2000

CON-LT-BLK-1.6-200

2000

Tie Wires - Loop Ties - Belt and Tools.

Description

3kg coil5kg coil

TIE WIRE.


WIRE-01.60-TIE-BLK-ANN-0001.0KG WIRE-01.60-TIE-BLK-ANN-0005.0KG


CON-LT-BLK-1.6-110-QTY0200

10kg coil

200

200

CON-LT-BLK-1.6-125

WIRE-01.60-TIE-BLK-ANN-0010.0KG

Cresent end cutters 200mm.

WIRE-03.15-TIE-BLK-ANN-050.00KGNo Known Code

CON-LT-BLK-1.6-125-QTY200CON-LT-BLK-1.6-150-QTY200

50kg coil50kg coil

Leather belt for reel.1.40mm black tie wire coil for reel.

CON-LT-GAL-1.57-125

Conversion tables.

centimetres inches inches centimetres kilogram pound pound kilogram(cm) (in) (in) (cm) kg lb lb kg

1/32 0.7938 7/8 22.2250 1 0.3937 1 2.54 1 2.205 1 0.45361/16 1.5875 29/32 23.0188 2 0.7874 2 5.08 2 4.409 2 0.90723/32 2.3813 15/16 23.8125 3 1.1810 3 7.62 3 6.614 3 1.3611/8 3.1750 31/32 24.6063 4 1.5750 4 10.16 4 8.818 4 1.8145/32 3.9688 1.0 25.4000 5 1.9690 5 12.70 5 11.02 5 2.2683/16 4.7625 1 1/32 26.1938 6 2.3620 6 15.24 6 13.23 6 2.7227/32 5.5563 1 1/16 26.9875 7 2..756 7 17.78 7 15.43 7 3.1751/4 6.3500 1 3/32 27.7813 8 3.1500 8 20.32 8 17.64 8 3.6299/32 7.1438 1 1/8 28.5750 9 3.5430 9 22.86 9 19.84 9 4.0825/16 7.9375 1 5/32 29.3688 10 3.9370 10 25.40 10 22.05 10 4.536

11/32 8.7313 1 3/16 30.1625 50 19.690 50 127.0 50 110.2 50 22.683/8 9.5250 1 7/32 30.9563 100 39.370 100 254.0 100 220.5 100 45.36

13/32 10.3188 1 1/4 31.75007/16 11.1125 1 9/32 32.5438 kilometre kilometre tonnes tons tons tonnes

15/32 11.9063 1 5/16 33.3375 (km) (km) t T t T1/2 12.7000 1 11/32 34.1313 1 0.6214 1 1.609 1 0.9842 1 1.016

17/32 13.4938 1 3/8 34.9250 2 1.243 2 3.219 2 1.968 2 2.0329/16 14.2875 1 13/32 35.7188 3 1.864 3 4.828 3 2.953 3 3.048

19/32 15.0813 1 7/16 36.5125 4 2.485 4 6.437 4 3.937 4 4.0645/8 15.8750 1 15/32 37.3063 5 3.107 5 8.047 5 4.921 5 5.080

21/32 16.6688 1 1/2 38.1000 6 3.728 6 9.656 6 5.905 6 6.09611/16 17.4625 1 17/32 38.8938 7 4.350 7 11.27 7 6.889 7 7.11223/32 18.2563 1 9/16 39.6875 8 4.971 8 12.87 8 7.874 8 8.1283/4 19.0500 1 19/32 40.4813 9 5.592 9 14.48 9 8.858 9 9.144

25/32 19.8438 1 5/8 41.2750 10 6.214 10 16.09 10 9.842 10 10.1613/16 20.6375 1 21/32 42.0688 50 31.07 50 80.47 50 49.21 50 50.8027/32 21.4313 1 11/16 42.8625 100 62.14 100 160.90 100 98.42 100 101.60

lb/f N lb/f N psi MPa MPa psi psi MPa MPa psi1 4.45 80 355.9 1 0.006895 0.1 14.5 1500 10.34 6.0 870.22 8.90 90 400.3 50 0.3447 0.2 29.01 1600 11.03 6.5 942.73 13.34 100 445 100 0.6895 0.3 43.51 1700 11.72 7.0 10154 17.79 200 990 200 1.379 0.4 58.02 1800 12.41 8.0 11605 22.24 300 1334 300 2.068 0.5 72.52 1900 13.10 9.0 13056 26.69 400 1779 400 2.758 0.6 87.02 2000 13.79 10.0 14507 31.14 500 2224 500 3.447 1.0 145.0 2100 14.48 11.0 15958 35.59 600 2669 600 4.137 1.5 217.6 2200 15.17 12.0 17409 40.03 700 3114 700 4.826 2.0 290.1 2300 15.86 13.0 188510 44.50 800 3559 800 5.516 2.5 362.6 2400 16.55 14.0 203120 89.00 900 4003 900 6.205 3.0 435.1 2500 17.24 15.0 217630 133.40 1000 4450 1000 6.895 3.5 507.6 2600 17.93 16.0 232140 177.90 2000 8890 1100 7.584 4.0 580.2 2700 18.62 17.0 246650 222.40 3000 13340 1200 8.274 4.5 652.7 2800 19.31 18.0 261160 266.90 4000 17790 1300 8.963 5.0 725.2 2900 19.99 19.0 275670 311.40 5000 22240 1400 9.653 5.5 797.7 3000 20.68 20.0 2901

Pressure - psi/MPa/psi.

Length - cms/inches/cms. Mass - kilos/pounds/kilos.

Mass - tonnes/tons/tonnes.Length - klms/miles/klms.

17

Length - Fraction of inches/mm.

inches mm inches mm

miles miles

lb/f - newtons Pressure - psi/MPa/psi.

Locations. Phone Number. Locations. Phone Number.QUEENSLAND QUEENSLAND (Cont)Acacia Ridge - No stock on site. Ph: (07) 3452 3888 Oxley Ph: (07) 3716 3177Charters Towers Ph: (07) 4761 5000 Rockhampton Ph: (07) 4924 3233Emerald Ph: (07) 4983 7333 Roma Ph: (07) 4624 3400Mareeba Ph: (07) 4048 4130 Toowoomba Ph: (07) 4616 1333Northgate Ph: (07) 3622 9323 Warwick Ph: (07) 4667 5080

NEW SOUTH WALES NEW SOUTH WALES (Cont)Albury Ph: (02) 6058 5466 Dubbo Ph: (02) 6841 2155Armidale Ph: (02) 6774 8610 Tamworth Ph: (02) 6755 3233Bathurst Ph: (02) 6330 9333 Wagga Wagga Ph: (02) 6932 3500

SOUTH AUSTRALIAAdelaide (Ottoway) Ph: (08) 8301 3777

VICTORIA VICTORIA (Cont)Ballarat Ph: (03) 5320 7833 Portland Ph: (03) 5522 4254Bendigo Ph: (03) 5434 9860 Mildura Ph: (03) 5051 6381Dandenong Ph: (03) 9768 1200 Shepparton Ph: (03) 5821 1688Geelong Ph: (03) 5247 4100 Warrnambool Ph: (03) 5559 4260

WESTERN AUSTRALIA WESTERN AUSTRALIA (Cont)Balcatta Ph: (08) 9229 4460 Kewdale Ph: (08) 9251 2500

i

Phone 1300 306 204

Metalcorp Steel Pty Ltd - ABN 13 002 581 213

www.metalcorpsteel.com.au

Locations. Phone Number. Locations. Phone Number.QUEENSLAND QUEENSLAND (Cont)Northgate Ph: (07) 3246 9222 Mt Isa Ph: (07) 4747 2833Bundaberg Ph: (07) 4131 4200 Rockhampton Ph: (07) 4924 3233

:hPsnriaC (07) 4048 9400 Toowoomba Ph: (07) 4614 2000Gladstone Ph: (07) 4979 6400 Townsville Ph: (07) 4729 3939Mackay Ph: (07) 4968 1666

SELAW HTUOS WENSELAW HTUOS WEN (Cont)Albury Ph: (02) 6058 5488 Dubbo Ph: (02) 6841 2800Auburn Ph: (02) 9714 8000 Tamworth Ph: (02) 6755 3222

:hPffidraC (02) 4904 6410 Wagga Wagga Ph: (02) 6932 3599Coffs Harbour Ph: (02) 6648 7388

VICTORIA VICTORIA (Cont)Ballarat Ph: (03) 5320 7855 Morwell Ph: (03) 5134 6266Bendigo Ph: (03) 5448 3811 Portland Ph: (03) 5522 4255Geelong Ph: (03) 5240 0300 Westall Ph: (03) 9549 2666Mildura Ph: (03) 5051 6388

SOUTH AUSTRALIA NORTHERN TERRITORYOttoway Ph: (08) 8301 3801 Darwin Ph: (08) 8984 2600

AILARTSUA NRETSEWAILARTSUA NRETSEW (cont)Albany Ph: (08) 9841 9700 Geraldton Ph: (08) 9921 9300Bunbury Ph: (08) 9724 5220 Kalgoorlie Ph: (08) 9024 1388Esperance Ph: (08) 9072 3100 Kewdale Ph: (08) 6250 1000

AINAMSATAINAMSAT (Cont)Hobart Ph: (03) 6211 4330 Launceston Ph: (03) 6324 1250

SELAW HTUOS WENDNALSNEEUQTrade Coast Ph: (07) 3853 9100 Chullora Ph: (02) 9766 9100

AILARTSUA HTUOSAIROTCIVSunshine Ph: (03) 9932 5500 Wingfield Ph: (08) 8260 3747

ii

Call 13 72 82BlueScope Distribution Ltd.

BlueScope Distribution Pty Ltd - ABN 88 096 380 068

BlueScope Sheet Metal Supplies.

BlueScope Pipeline Supplies.1300 66 1156

Our Project & Processing Services

Our nationwide network of specialist metals distribution businesses offers a range of value added services to our customers.

WAREHOUSING AND LOGISTICS

Our modern warehouse facilities are serviced by a fleet of delivery vehicles and are designed to process, store, receiveand despatch sheet, coil and other metal products with maximum efficiency while maintaining excellent quality.

High product quality delivery standards are maintained by storing products undercover, with inspection prior to despatch, and packaging the material to ensure that no damage occurs in storage or transit.

INVENTORY AND STOCK MANAGEMENT

Inventory Management Programs utilising SAP/MRP software ensure the availability of materials, purchased at competitive prices and held against customer forecasts and delivery schedules.

Our customers benefit from;

• Reducing your own warehouse space for stock

• A reduction of damage in storage

• Reducing the management hours needed for inventory.

MATERIALS PROCESSING

Our modern processing centres are able to process a wide range of steel products, dimensions, types and grades. From state of the art multi-blanking, guillotining, shearing, slitting for our sheet and coil product range to plasma, oxy and saw cutting, drilling and coping for our Steel and Tube product range; our businesses are ready to provide all your steel processing needs.

EXPORT SERVICES

Our Exports business unit is in place specifically to supply and service our overseas customers with all products and services within BlueScope Distribution.

Whether it is bulk supply of high quality steel plate or the airfreight of a small, single, specialised valve to the remotest of locations, the export sales unit has the resources, experience and commitment to satisfy your metal supply requirements.

The information contained in this brochure is provided by way of general information only, and should not be relied upon by any person. You must seek specific advice as to the suitability of the products featured in this brochure for the purpose for which, and the manner in which, you propose to use them. This may involve further independent analysis and testing. BlueScope Steel Limited, and its related bodies corporate take no responsibility for any adverse consequences of any nature which arise as a result of reliance on this brochure. © 2008 BlueScope Steel Limited (ABN 16 000 011 058)

BlueScope is a trade mark of BlueScope Steel Limited ABN 16 000 011 058.

BSD0

020

05/

08

Documents

Reinforcing Guide 2013