DESIGN OPEN SPACES.RELAZZO - THE DECKING SYSTEM. TECHNICAL INFORMATION / PRODUCT RANGE OVERVIEW R20600

Valid from 01.01.2014Subject to technical modificationswww.rehau.com/relazzo

Building SolutionsAutomotiveIndustry

Scan the QR codeand learn more:

2

1 . . . . . General information . . . . . . . . . . . . . . . . . . 31.1 . . . . Applicability . . . . . . . . . . . . . . . . . . . . . . 31.2 . . . . Area of application . . . . . . . . . . . . . . . . . . . 31.3 . . . . Ecology/Economic efficiency . . . . . . . . . . . . . . 32 . . . . . Product information . . . . . . . . . . . . . . . . . . 32.1 . . . . Product description. . . . . . . . . . . . . . . . . . . 32.2 . . . . Dimensions and permitted deviations . . . . . . . . . . 32.3 . . . . Surface finish and colour . . . . . . . . . . . . . . . . 42.4 . . . . Colour development . . . . . . . . . . . . . . . . . . 42.5 . . . . Thermal properties . . . . . . . . . . . . . . . . . . . 52.6 . . . . Chemical properties . . . . . . . . . . . . . . . . . . 52.7 . . . . Physical properties . . . . . . . . . . . . . . . . . . . 52.8 . . . . Accident prevention . . . . . . . . . . . . . . . . . . 52.9 . . . . Fire behaviour . . . . . . . . . . . . . . . . . . . . . 53 . . . . . Practical information . . . . . . . . . . . . . . . . . . 53.1 . . . . Care/Maintenance . . . . . . . . . . . . . . . . . . . 53.2 . . . . Care tips. . . . . . . . . . . . . . . . . . . . . . . . 63.3 . . . . Processing/Assembly advice . . . . . . . . . . . . . . 73.4 . . . . Storage suggestions and handling . . . . . . . . . . . 84 . . . . . Product range overview RELAZZO decking system. . . . 9

CONTENTS

3

1 General information

1.1 ApplicabilityThis Technical Information applies for the REHAU RELAZZO decking system, consisting of boards, substructure and system components. Information about assembly can be found in the installation instruc-tions for the RELAZZO decking system.

1.2 Area of application

The RELAZZO decking boards, the substructure as well as all of the system components were specially developed for use as decking. The products do not have building authority approval and for this reason are not be used for self-supporting, structur-al purposes or vertically as wall cladding or fencing. The local building regulations are to be observed accordingly.

In the case of installation on balconies or bridgework for example, it is important to provide a structurally sound foundation and, where necessary, to use a steel substructure with a small bearing distance between supports. 1.3 Ecology/Economic efficiencyThe RELAZZO decking system is PEFC-certified and therefore underlines REHAU’s sense of responsibility to the environment In terms of sustained environmental ecology, the RELAZZO decking boards are completely recyclable. Due to the wood content of over 50 %, the RELAZZO decking boards and substructure fall into waste wood ordinance Class AIV and are classed as biomass. The local disposal regulations are to be observed accordingly.Thanks to the considerably greater durability and virtually no need for additional treatments, RELAZZO decking profiles are substantially more economically efficient in the long term than conventional wooden coverings. The RELAZZO decking system meets DIN CEN/TS 15083-01 “Durability of wood and wood-based products - Determination of the natural durability of solid wood against wood-destroying fungi” of the highest durability class 1 (very durable).

2 Product information

2.1 Product descriptionThe RELAZZO decking boards (and substructure) are made of high quality polypropylene and at least 50% wood fibres from sustainable, European forestry. This material combination of wood and polymer is known as wood-polymer composite, or WPC for short. The WPC

RELAZZO - THE DECKING SYSTEM.

material developed by REHAU RAU-WOOD ideally combines the positive properties of polypropylene and wood. With excellent mechanical characteristic values, the profile also retains a natural feel and look.Additional surface brushing of the RELAZZO profiles creates a roughened finish, further enhancing the natural look of the product.Advantages over solid wood decking include reduced cleaning and maintenance, greater durability and improved dimensional stability.THE RELAZZO decking boards are reversible, offering a choice between two different profiled surfaces (ribbed or grooved).Die Befestigung der einzelnen Terrassendielen erfolgt mittels eigens entwickeltem Klammersystem aus Edelstahl (V4A), das eine einfache adequate structural stability, as well as allowing for the disassembly and reassembly of individual boards at a later date.The RELAZZO decking system has the “Qualitätsgemeinschaft Holzwerkstoffe e.V.” quality seal of the VHI (Association of the German Woodworking Industry) and bears the TÜV octagon of the TÜV-SÜD (certified in accordance with TÜV guidelines). This quality seal sets out uniform quality criteria for decking profiles and is given to products that fulfil the highest of qualitative requirements. The TÜV certificate stands for stringent, international tests and limit values. The properties of RELAZZO are subject to regular testing by an independent, external institute.

2.2 Dimensions and permitted deviationsAll dimensions and tolerances are set out on the latest version of the REHAU drawing. For dimensions without any special tolerance specifications, the following general tolerances apply in accordance with DIN 2768 dated

Component Dimensions W x H x L [mm] Weight [kg/running m]

Decking board classic*140 x 30 x 4,000 / 5,000 / 6,000

1.9

Decking board pro*194 x 30 x 4,000 / 5,000 / 6,000

2.6

Decking board edge*140 x 30 x 4,000 / 5,000 / 6,000 4.4

Substructure 60 x 40 x 4,000 1.750 x 30 x 4,000 1.3

Aluminium edge strip

40 x 60 x 4,000

Aluminium step profile 80 x 90 x 4,000

* Length tolerance +20 mm

4

2.3 Surface finish and colourTo increase the anti-slip properties of the surface, the RELAZZO decking boards are roughened using a special brushing process. Unlike solid wood or unbrushed decking boards, WPC decking boards achieve an anti-slip classification of R11 (approval for public areas). Above all, this process minimises the risk of an accident on wet profiles. It is however to be borne in mind that the anti-slip properties are reduced in wet or icy conditions.The special surface finish also enhances the wood characteristic of the profiles. Brushing is carried out uniformly in one direction, raising the wood particles evenly. In order to avoid an irregular look, you should ensure that all boards are laid in the direction of brushing. The direction of brushing is indicated by the marking or arrow on the side. On the opposite side in the hollow chamber or, in a solid profile, on the outside you will find two ridges (see pictures).However, you can also use the brushing to purposely achieve desired visual effects.

The RELAZZO decking boards are available in the following colours:Colour

Decking board: Terra Dark brownAmetista Red brownAmbra Mid brownSasso Blue grey

Substructure: Black Black

2.4 Colour developmentThe RELAZZO decking board colours are UV-resistant. The colour characteristics are therefore retained even in the case of intensive weathering.However, wood is a natural product and is subject to colour variations. In the first few weeks there is a reaction of the substance contained in wood, lignin, with the UV part of light. This causes a yellowing of the wood fibres in the surface layers of the decking boards. This effect may be visible prior to installation under certain circumstances. However, discolouration that occurs in this way is washed out again by the effect of water (e.g. rain) within the first few months. Discoloura-tion resulting from the movement of objects (for example flower pots) also goes through this natural process. You can accelerate this process by spraying the surface with water within the first 8 to 10 weeks after installation (e.g. with a high pressure cleaner, see 3.2 Care tips, Basic cleaning).The wood fibres then proceed through the natural process of greying. Subsequent removal of the greyed fibres by means of high pressure cleaning with a high nozzle pressure or by sanding the surface only leads to a brief lightening of the wood particles. The process of yellowing and greying then starts all over again.The basic colour of the decking, which is derived from the dyed polymer component, is nevertheless retained in the long term and reflects the product‘s colour character at any given time. However, the discolouration described does not impair the mechanical properties of the RELAZZO decking system in any way and therefore does not represent a defect.The raw material wood also means possible colour variations and shadowing that enhance the natural wood appearance. When using different batches, it is recommended that you mix up the batches, so that this effect is used to its full potential. Due to the colour variations described, samples provided can only be used as a guide for colour selection. The individual batches are subject to the natural colour variations of wood.

Terra Ciottolo

Original colour immediately after installation.

Yellowing depending on sunlight after one day to 2 months.

Lightening and greying depending on the weather conditions after 2 to 5 months.

Figure: Examples of colour changes of the wood particles due to weathering. Ciottolo is non-standard (not stocked).

5

Figure: The desired colour effect is maintained even after several years.

The colours are represented as realistically as possible. Deviations from the original may occur.The RELAZZO decking system was specially developed for outdoor use. As it contains natural wood fibres, the colour of the boards will change under the effects of UV rays. For (partly) covered decking, there may therefore be colour variations over time. In order to avoid this, the covered area should be regularly sprayed with water until the colour has stabilised in the ageing process. To do this, the decking boards can be sprayed with water or treated in the direction of the ridges with a high pressure cleaner.

2.5 Thermal propertiesThe material RAU-WOOD was developed in order to ensure high dimensional stability and profile strength even in strong sunlight. However, long-term exposure to direct sunlight at temperatures of over 70 °C on the surface of the decking boards is to be avoided in order to prevent damage to the surface, as well as mechanical stress. At permanent high ambient temperatures, the substructure spacing is also to be reduced by 10 cm depending on the installation method used.WPC products warm up under the effect of heat just like any other building material. Dark shades warm up more than light shades. It is important to remember this when walking barefoot on the decking.As a natural material wood reacts to the influences of weather (temperature and humidity). In order to retain the long life, sufficient air circulation is to be ensured. The influence of heat and moisture occurring simultaneously acceler-ates the decomposition of the wood structures and therefore influenc-es the mechanical properties, as well as reducing the life of the RELAZZO decking boards.These are therefore not suitable for use in the tropics and similar areas.

2.6 Chemical propertiesThe REHAU WPC products do not contain any heavy metals or any other components that are harmful to the environment.The material RAU-WOOD demonstrates a high resistance to external environmental influences. Exposure to oxidisation agents, such as industrial bleaches and strong acids as well as organic solvents (e.g. ethanol, acetone, xylene, hydrocarbons, etc.) is however to be avoided.Please therefore take care when using fuel, grill lighter fluids and sulphur compounds, as these can attack the material.

The brackets and screws are made from stainless steel V4A and the existing test results confirm that the RELAZZO decking system is suitable for use around the pool (in chlorinated air) and on the coast (in salty air).

2.7 Physical propertiesCertain materials rubbing against each other (e.g. rubber sole on plastic flooring, this includes WPC decking boards among others) can cause an electrostatic charge under certain circumstances (e.g. low air humidity and dry profile) and cause sparks from static electric discharge. In order to avoid or discharge the static charge, the earthing of the floor covering, the use of conductive and earthed jointing profiles, antistatic mats or appropriate shoes and the shielding of electronic components is recommended. National standards, specifications, legislation, operating instructions (e.g. electronic devices) or similar are to be observed.

2.8 Accident preventionIn order to rule out any risk of physical injury, the following advice must be observed and followed.In the case of point loads that exceed 300 kg, the components of the substructure are to be laid closer together than specified (depending on the laying direction).The products do not have building authority approval and for this reason are not to be used for self-supporting, structural purposes. The local building regulations are to be observed accord-ingly (see 1.2 Area of application). The substructure must be sufficiently load-bearing for the load.In the case of wet, icy or other slippery conditions, beware of the reduced slip resistance.Due to the grooved effect on the boards, as well as the installation joints (expansion joints), there is an increased risk of tripping when wearing shoes with thin, pointed heels. This risk can be minimised using various jointing solutions.Lighting installation: The installation and fitting of lighting elements (LED spots, etc.), fitting electrical auxiliary devices, the connection and commissioning of the whole system for low voltage is to be carried out by a certified electrician.

2.9 Fire behaviour The fire behaviour of the RELAZZO decking boards was tested to the testing process DIN EN ISO 11925-2 and classified as follows according to DIN EN 13501-1:2007: Class Efl (construction products with normal flame-resistance)Use for escape routes is therefore not permitted.

3 Practical information

3.1 Care/MaintenanceDue to their properties, RELAZZO decking boards do not require subsequent protective coating treatment (oil, varnish) to protect the wood as with solid wood products. There is also no need to treat the boards with wood protection substances for mould or discolouration.

6

The cleaning performance is mainly determined by the following factors: - Frequency of cleaning - Quantity of cleaning agent - Temperature - Cleaning time - Mechanical processing - Sun/UV rays

The cleaning agent manufacturer’s information is to be observed.Rinse well with water after cleaning.

Basic cleaning (dirt):Weekly sweeping and washing down with warm water (not too hot) at least twice a year will generally keep the decking clean in the long term. If simply washing down with water is not sufficient, we recommend rinsing the decking with a high pressure cleaner (max. 60 °C, 100 bar, at a minimum distance of 500 mm) and any other dirt with warm water, a high pressure cleaner and light detergents. Dirt milling is not recommended.Oxalic acid-based decking cleaners are to be used for stubborn spots. Animal excrement and urine can usually be treated and removed in

3.2 Care tipsAs a result of the fact that the wood fibres are embedded separately and under high pressure as well as temperature in a polypropylene matrix, dirt cannot, or finds it difficult to get deep into the profile. Dirt usually remains on the surface or is drawn in by brushing or rubbing the exposed wood fibres. Polypropylene stands out in addition to its positive environmental properties (e.g. no release of hydrochloric acid and hydrocyanic acid during burning) due to high lightfastness and chemical resistance (e.g. in comparison to PVC and ABS). Care and maintenance of the RELAZZO decking boards is the responsibility of the user. Regular cleaning removes various deposits (dirt, bits of food,....)

especially from the grooves. This prevents mould, which would otherwise grow on the dirt deposits. It is fundamentally important to always deal with spills (particularly grease and oil) as quickly as possible to minimise the amount which seeps into the wood fibres. In most cases, immediate treatment with hot soapy water is sufficient. If bleaching agents are used on stubborn dirt, the respective agent is to be tested first on a hidden area of the decking to ensure that it won‘t remove the colour.The following cleaning measures are generally to be carried out for light to heavy dirt.

Table: Cleaning recommendations, Summary.Cause Example Cleaning recommendationAll Light Cold water

Warm water Mild cleaning agent (detergent) Strong detergent Sponge High pressure cleaner Bleaching agent (chlorinated water) Sandpaper Wire woolHeavy Steel brush

Dried-on food Red wineSugary refreshments Cola Diluted chlorinated water, High pressure cleanerHot drinks CoffeeBurn marks CigarettesAcids Sulphuric acid Sand paper, Wire wool, Steel brushBases Caustic sodaColours PaintsIron Rust spots Oxalic acid, Phosphoric acidMoisture Mould Sodium hypochlorite (liquid bleach)

Dirt

level

the same way as any other dirt with warm water, a high pressure cleaner and light detergents.

Special cases:Pencil marks from the installation can easily be removed with a rubber eraser. Chalk marks, with the exception of white chalk, cannot be removed, but can be reduced with warm water and a bleaching agent. Paint is extremely difficult to remove but the best thing to use is white spirit.

Dirt from the barbecue:Grease, charcoal or cigarette marks are some of the most difficult substances to remove. Whilst grease marks can generally be removed with special decking cleaners or fat solvents, charcoal or ash marks can only be removed by sanding down the decking (e.g. using sandpaper, metal brushes, wire wool). However, each time the decking is sanded, the original brushed look deteriorates. It is therefore to be ensured that any sanding is carried out in the direction of the original brushing. We strongly recommend placing a mat under the barbecue. Take care with firelighters (see 2.6 Chemical properties).

7

Mould:Warm water with detergent or chlorine cleaner (bleaching agent) helps to combat mould/algae and fungi. For well-established mould/algae and fungi several treatments are often necessary; special anti-mould/algae and fungi cleaners are available from specialist retailers. We would advise against using bark mulch in the immediate vicinity, as this generally contains mould spores. Under certain climatic conditions and where installation is not compliant with REHAU standards, fungal growth is also possible. However, this risk can be reduced by keeping the decking clean and dry. It is therefore important to ensure that the decking (with gap spacing) and the substructure are well ventilated in accordance with the official installation instructions.

Rust:To eliminate spots of rust we recommend an oxalic or phosphoric acid-based cleaner.The materials supplied (brackets, screws...) made of high quality, coated stainless steel are to be used to secure the profiles. Otherwise, rust may form and damage the fixing components.

Snow and ice:In order to prevent scratches on the decking, we recommend using plastic shovels to remove snow; never scrape or hack away at ice with an ice pick. General gritting salt can also be used to remove snow and ice. Stains could occur when doing this, but are easy to remove.

3.3 Processing/Assembly advicePlease note the current installation instructions.

Processing:The RELAZZO decking boards can generally be processed using common woodworking tools. Drilling, sawing, milling and planing are also possible in principle. However, due to the polymer content, a reduced service life of the tool blades is to be expected. When sawing (with a circular saw) a hardened metal saw blade with alternating teeth is recommended. Clean deburring is generally advisable.

Construction:The construction is dependent first and foremost on the sub-base. This can be ballast, concrete or a sealed surface (flat roof), see installation instructions. It is always to be checked that the subsoil is sufficiently load-bearing to withstand the future load.Ballast sub-base: The coarse ballast must first of all be well compacted into a frost-proof sub-base (consult local building regulations), in order to then be able to form an approx. 5 cm high gravel bed on top of it, which is simultaneously created with a gradient of 1-2 %. The substructure profiles are then laid on paving stones (stone, paving slabs) in order to avoid stagnant moisture and fixed in place using the assembly brackets or screws on the adjusting feet. Concrete sub-base: A gradient of 1-2 % is to be created in the case of a concrete construction. The substructure profiles are then laid and fixed in place using the assembly brackets.Note! If the substructure profiles are laid across the gradient, rubber layers, paving stones (stone, flagstone) or adjustable feet are to be laid underneath to avoid stagnant moisture. Overlapping of rubber layers is to be avoided.

Sealed surfaces: It is to be checked whether the flat roof materials are compatible with the RELAZZO decking system materials. Any damage to the sealing membrane is to be avoided. A rubber layer must be used on surfaces that are already sealed in order to avoid stagnant moisture and other damage to the sealing membrane and substructure. Overlapping rubber layers is to be avoided. The substructure is to be laid floating (the substructure is not screwed to the floor, and instead a substructure frame is built using assembly brackets to which all of the substructures are fixed); the prescribed gaps between the substructures are to be observed. The anchoring/fixing of the substructure frame against wind loads is to be agreed with a specialist.

In the case of large loads, installation angles other than 90° to the substructure and constant high temperatures, the gap between the substructures is to be narrower (see Point 2.5). The assembly brackets are screwed to the substructure using screws and fix the decking boards on the left and right as a result of the clamping action.In order to prevent the screws coming loose from the boards and substructure, it is recommended that pilot holes are drilled for the screws with a torque of approx. 1.1 Nm.

Expansion: During assembly, it is to be noted that the RELAZZO decking boards (and substructure) may swell and shrink over the next few years as a result of fluctuations in temperature and humidity. It is therefore necessary to ensure that there is an expansion gap between the individual profiles themselves and all adjacent objects (house wall, etc.). In addition to this, a sufficiently large supporting surface for the substructure and suitable fixings are to be provided. As a rule of thumb: A 3 mm gap is to be left for longitudinal joints for each running metre of decking and substructure.

Edging strip:If there isn’t enough room for a whole board at the end of an installation, the whole edge board can be trimmed along the length. The trimmed board is fixed in place using mounting plates and countersunk screws. If a vertical edge decking board is additionally used at the edge, fixing brackets and countersunk screws are used.

8

Edge finish:The hollow ends of the decking boards can be finished with the RELAZZO end caps, the aluminium end strip or the flexible finisher.

The end caps are to be glued flush to the boards with the RELAZZO adhesive (see image). To do this, dust should be removed from the adhesive surfaces using acetone. It is to be ensured that the ventila-tion/drainage slots retain their function and are not sealed by the adhesive. In order to increase the adhesion force, it is recommended to sand and/or apply primer to the contact surfaces (see material data sheet adhesive).When fitting the aluminium end strip, it is helpful to fix the supplied spacer blocks to the end strip using instant adhesive.The flexible end trim can be used to seal the decking boards even on non-straight edges. To do this a groove is routed into the end of the board with a router, the RELAZZO decking adhesive applied to the barbed spacer block and the soft trim pressed into the groove by hand or with the help of a rubber mallet.Sealing the hollow sections reduces the amount of dirt or water that can ingress into the cavities.Visually all system components form an attractive and high quality edge finish.

Jointing profile:The joint cover profile is only resistant to being sprayed with chlorinat-ed water. Frequent contact with chlorinated water can lead to bleaching of, and damage to the profile.No tension is to be applied to the joint cover profiles during installa-tion.Please take into account possible shrinkage of the joint cover profile of max. 1 %.

3.4 Storage suggestions and handlingThe decking boards and the substructure are supplied in timber frame crates; the profile package is wrapped in film. Nevertheless, we recommend storage in a warehouse or at least indoors in order to prevent discolouration due to moisture and sunlight. If covered permanently, discolouration, so-called mildew stains, of the decking may occur. Opened packaging units and unused profiles are always to be stored flat in dry conditions. Generally it is important to ensure that work areas are clean in order to avoid dirt and scratches, etc.If individual parts are stacked it is to be ensured that any damage to boards and substructures is avoided.

9

4 Product range overview RELAZZO decking system

Article description Art. No. Dimensions W x H x L (mm)Decking board classic Decking board proDecking board edgeColour Terra(dark brown)

162726911605306116030851

140 x 30 x 4,000 / 5,000 / 6,000194 x 30 x 4,000 / 5,000 / 6,000140 x 30 x 4,000 / 5,000 / 6,000

Decking board classicDecking board proDecking board edge Colour Ametista(red brown)

162726911605306116030851

140 x 30 x 4,000 / 5,000 / 6,000194 x 30 x 4,000 / 5,000 / 6,000140 x 30 x 4,000 / 5,000 / 6,000

Decking board classicDecking board proDecking board edge Colour Ambra(mid brown)

162726911605306116030851

140 x 30 x 4,000 / 5,000 / 6,000194 x 30 x 4,000 / 5,000 / 6,000140 x 30 x 4,000 / 5,000 / 6,000

Decking board classicDecking board proDecking board edge Colour Sasso(blue grey)

162726911605306116030851

140 x 30 x 4,000 / 5,000 / 6,000194 x 30 x 4,000 / 5,000 / 6,000140 x 30 x 4,000 / 5,000 / 6,000

140 mm

30 mm

RELAZZO classic RELAZZO edgeRELAZZO pro

30 mm 30 mm

194 mm 140 mm

10

Article description Art. No. Dimensions W x H x L (mm)SubstructureColour black

1626818116272261

60 x 40 x 4,00050 x 30 x 4,000

Article description Art. No. Packaging unitAdjustable feet 13039861 20 Pc

Screws for adjustable feet 13047571 20 Pc

Adjustable feet adapter 13039871 40 Pc

Rubber underlayColour black50 x 50 x 3 mm50 x 50 x 5 mm50 x 50 x 10 mm

135445311354472113544731

100 Pc100 Pc50 Pc

Assembly bracketV4A stainless steel, black coated

13534501 20 Pcincl. 45 screws

11

Article description Art. No. Packaging unitConnecting plateV4A stainless steel, black coated

13544771 20 Pcincl. 45 screws

End clipsV4A stainless steel, black coated

13533591 25 Pcincl. 25 screws

Flush end clipsV4A stainless steel, black coated

13534211 25 Pcincl. 25 screws

Centre clipsV4A stainless steel, black coated

13533581 100 Pcincl. 100 screws + 1 bit

Decking board end caps classicColour Terra, Ametista, Ambra, Sasso

13558241 25 Pc

Decking board end caps proColour Terra, Ametista, Ambra, Sasso

13128181 25 Pc

12

Article description Art. No. Packaging unitAluminium finisher

12019091 4 m

Fastening set for aluminium- finisher

12023941 20 screws, 3 Pc RAUTITAN à 10 cm

Flexible end stripColour Terra, Ametista, Ambra, Sasso

16214371 4 m

Screen groove cutter 13537051 1 Pc

Adhesive290 ml

13544761 1 Pc

Mounting plateV4A stainless steel, black coated

13047541 10 Pcincl. 60 screws

13

Article description Art. No. Packaging unitAluminium step profile 13544261 4 m

Mounting bracketV4A stainless steel, black coated

13047581 10 Pcincl. 100 screws

Joint filler profileColour black

18010421 50 m

Joint coverColour black

13536461 100 m

LED spot set

LED spot extension set

13046031

13128061

3 LED spots, switchtransformer, cable

1 LED spot, switch, cable

NOTES

NOTES

www.rehau.com/relazzo ©REHAU R20600 EN 01.2014

DESIGN OPEN SPACES.RELAZZO - THE DECKING SYSTEM.

Do you require more information, samples or advice?Please contact your local retailer. You will find some retailers in your area and information about the product range RELAZZO OUTDOOR LIVING as well as the current installation instructions on our Home-page www.rehau.com/relazzo. You can of course also contact us by e-mail at relazzo@rehau.com.

Legal information: The WPC profile and the substructure do not have building authority approval, and for this reason are not to be used for self-supporting, structural purposes. The local building regulations are to be observed accordingly.

Please note the current installation instructions.

RELAZZO - QG/2008/Z08, PP

Scan the QR codeand learn more:

Our verbal and written advice relating to technical applications is based on experience and is to the best of our knowledge correct but is given without obligation. The use of REHAU products in conditions that are beyond our control or for applications other than those specified releases us from any obligation in regard to claims made in respect of the products. We recommend that the suitability of any REHAU product for the intended application should be checked. Utilization and processing of our products are beyond our control and are therefore exclusively your responsibility. In the event that a liability is nevertheless considered, any compensation will be limited to the value of the goods supplied by us and used by you. Our warranty assumes consistent quality of our products in accordance with our specification and in accordance with our general conditions of sale.

This document is protected by copyright. All rights based on this are reserved. No part of this publication may be translated, reproduced or transmitted in any form or by any similar means, electronic or mechanical, photocopying, recording or otherwise, or stored in a data retrieval system.