183  

REFERENCES

[1] Rotello, V, M., 2004, “Nanoparticles: Building Blocks for Nanotechnology,” Kluwer Academic Publishers., New York, Chap. 1.

[2] Gopalakrishnan, J., 1995, “Introduction to Nanoparticle Synthesis,” Chem. Mater., 7, pp. 1265-1287.

[3] Bao, Y., Pakhomov, A, B., Krishnan, K, M., 2005, “A general approach to synthesis of nanoparticles with controlled morphologies and magnetic properties,” J. Appl. Phys., 97, pp. 10J317-3.

[4] Umar, A., 2010, “Metal Oxide nanostructures and their applications,” Najran University, Saudi Arabia, Yoon-Bong Hahn, ISBN: 1-58883-170-1, Chap. 1-3.

[5] Weintraub, B., Zhou, Z., Li, Y., Deng, Y., 2010, “Solution synthesis of one-dimensional ZnO nanomaterials and their Applications,” Nanoscale, 2, pp. 1573–1587.

[6] Crespilho, F, N., Zucolotto, V., Jr, O, N, O., Nart, F, C., 2006, “Electrochemistry of Layer-by-Layer Films: a review,” Int. J. Electrochem. Sci., 1, pp. 194-214.

[7] Nain, A, S., Amon, C., Sitti, M., 2005, “Proximal Probes based Nanorobotic Drawing of Polymer Micro/Nanofibers,” IEEE Transactions on Nanotechnology, 5, pp. 499-510.

[8] Zhang, S., Gelainb, F., Zhao, X., 2005, “Designer self-assembling peptide nanofiber scaffolds for 3D tissue cell cultures,” Seminars in Cancer Biology., 15, pp. 413–420.

[9] Kimizuka, N., 2008, “Self-Assembled Nanomaterials,” Adv. Polym. Sci., 219, pp. 1-26.

[10] Wang, Y., Zheng, M., Lu, H., Feng, S., Ji, G., Cao, J., 2010, “Template Synthesis of Carbon Nanofibers Containing Linear Mesocage Arrays,” Nanoscale Res Lett., 5(6), pp. 913–916.

[11] Zhao, J., Han, W., Chen, H., Tu, M., Zeng, R., Shi, Y., Cha, Z., Zhou, C., 2001, “Preparation, structure and crystallinity of chitosan nano-fibers by a solid–liquid phase separation technique,” Carbohydr. Polym., 83, pp. 1541–1546.

[12] Formhals, A., 1934,“Process and apparatus for preparing artificial threads” US Patent 1975504,.

[13] Formhals, A., 1939“Method and apparatus for spinning” US Patent 2160962. [14] Formhals, A., 1940 “Artificial thread and method of producing same” US

Patent 2187306. [15] Taylor, G, I., 1964, “Disintegration of water drops in an electric field,” Proc.

R. Soc. London, Ser. A., 280, pp. 383-397.

  

184  

[16] Vonnegut, B., Neubauer, R, L., 1952, “Production of monodisperse liquid articles by electrical atomization,” Journal of Colloid Science., 7, pp. 616-622.

[17] Drozin, V, G., 1955, “The electrical dispersion of aerosols,” Journal of Colloid Science., 10, pp. 158-164.

[18] Simons H, L., 1966, “Process and apparatus for producing patterned non-woven fabrics” US patent 3,280,229.

[19] Baumgarten, P, K., 1971, “Electrostatic Spinning of Acrylic Microfibers,” J. Colloid Interface Sci., 36, pp. 71-79.

[20] Doshi, J., Reneker, D, H., 1995, “Electrospinning Process and Applications of Electrospun Fibers,” J. Electrost., 35, pp. 151-160.

[21] Hayati, I., Bailey, A, I., Tadros, T, F., 1987, “Investigations into the mechanisms of electrohydrodynamic spraying of liquids: I. Effect of electric field and the environment on pendant drops and factors affecting the formation of stable jets and atomization,” J. Colloid Interface Sci., 117, pp. 205-221.

[22] Huang, Z.M., Zhang, Y, Z., Kotaki, M., Ramakrishna, S., 2003, “A review on polymer nanofibers by electrospinning and their application in nanocomposites,” Compos. Sci. Technol., 63, pp. 2223-2253.

[23] Larrondo, L., Manley, R, S, J., 1981a, “Electrostatic fiber spinning from polymer melts: Experimental observations on fiber formation and properties,” J. Polym. Sci., Part B: Polym. Phys., 19, pp. 909-920.

[24] Larrondo, L., Manley, R, S, J., 1981b, “Electrostatic fiber spinning from polymer melts: examination of the flow field in an electrically driven jet,” J. Polym. Sci., Part B: Polym. Phys., 19, pp. 921-932.

[25] Ma, P, X., Zhang, R., 1999, “Synthetic nano-scale fibrous extracellular matrix,” J. Biomed. Mat. Res., 46, pp. 60–72.

[26] Liu, Y., He, J, H., Yu, J, Y., Zeng, H, M., 2008, “Controlling numbers and sizes of beads in electrospun nanofibers,” Polym Int., 57, pp. 632–636.

[27] Bhardwaj, N., Kundu, S, C., 2010, “Electrospinning: A fascinating fiber fabrication technique,” Biotechnol. Adv., 28, pp. 325-347.

[28] Fridrikh, S, V., Yu, J, H., Brenner, M, P., Rutledge, G, C., 2003, “Controlling the Fiber Diameter during Electrospinning,” Phys. Rev. Lett., 90, pp. 144502-4.

[29] He, J, H., Wu , Y., Zuo, W, W., 2005, “Critical length of straight jet in electrospinning,” Polymer., 46, pp. 12637–12640.

[30] Matthews, J, A., Wnek, G, E., Simpson, D, G., Bowlin, G, L., 2002, “Electrospinning of collagen nanofibers,” Biomacromolecules., 3, pp. 232-238.

[31] Kim, K, W., Lee, K, H., Khil, M, S., Ho, Y, S., Kim, H, Y., 2004, “The effect of molecular weight and the linear velocity of drum surface on the properties of electrospun poly (ethylene terephthalate) nonwovens,” Fiber Polym., 5, pp. 122-127.

[32] Chew, S, Y., Wen, J., Yim, E, K, F., Leong, K, W., 2005, “Sustained release of proteins from electrospun biodegradable fibers,” Biomacromolecules., 6, pp. 2017-2024.

  

185  

[33] Li, D., Wang, Y., Xia, Y., 2003, “Electrospinning of polymeric and ceramic nanofibers as uniaxially aligned arrays,” Nano Lett., 3, pp. 1167-1171.

[34] Katta, P., Alessandro, M., Ramsier, R, D., Chase, G, G., 2004, “Continuous electrospinning of aligned polymer nanofibers onto a wire drum collector,” Nano Lett., 4, pp. 2215-2218.

[35] Bhattarai, N., Edmondson, D., Veiseh, O., Matsen, F, A., Zhang, M., 2005, “Electrospun chitosan-based nanofibers and their cellular compatibility,” Biomaterials., 26, pp. 6176-6184.

[36] Teo, W, E., Ramakrishna, S., 2005, “Electrospun fibre bundle made of aligned nanofibres over two fixed points,” Nanotechnology., 16, pp. 1878-1884.

[37] Teo, W, E., Kotaki, M., Mo, X, M., Ramakrishna, S., 2005, “Porous tubular structures with controlled fibre orientation using a modified electrospinning method,” Nanotechnology., 16, pp. 918-924.

[38] Theron, A., Zussman, E., Yarin, A, L., 2001, “Electrostatic field-assisted alignment of electrospun nanofibers,” Nanotechnology., 12, pp. 384-390.

[39] Li, D., Wang, Y., Xia, Y., 2004, “Electrospinning nanofibers as uniaxially aligned arrays and layer-by-layer stacked films,” Adv. Mater., 16, pp. 361-366.

[40] Sundaray, B., Subramanian, V., Natarajan, T, S., Xiang, R, Z., Chang, C, C., Fann, W, S., 2004, “Electrospinning of continuous aligned polymer fibers,” Appl. Phys. Lett., 84, pp. 1222-3.

[41] Teo, W, E., Ramakrishna, S., 2005, “Electrospun fibre bundle made of aligned nanofibres over two fixed points,” Nanotechnology., 16, pp. 1878-1884.

[42] Dalton, P, D., Klee, D., Moller, M., 2005, “Electrospinning with dual rings,” Polym. Commun., 46, pp. 611-614.

[43] Smit, E., Buttner, U., Sanderson, R, D., 2005, “Continuous yarns from electrospun fibers,” Polym. Commun., 46, pp. 2419-2423.

[44] Theron, S, A., Yarin, A, L., Zussman, E., Kroll, E., 2005, “Multiple jets in electrospinning: experiment and modeling,” Polymer., 46, pp. 2889-2899.

[45] Seema, A., Wendorff, J, H., Greiner, A., 2008, “Use of electrospinning technique for biomedical applications,” Polymer., 49, pp. 5603-5621.

[46] Tian, Y., Wu, M., Liu, R., Li, Y., Wang, D., Tan, J., Wu, R., Huang, Y., 2011, “Electrospun membrane of cellulose acetate for heavy metal ion adsorption in water treatment,” Carbohydr. Polym., 83, pp. 743-748.

[47] Kriegel, C.,, Arrechi, A., Kit, K., McClements, D, J., Weiss, J., 2008, “Fabrication, functionalization, and application of electrospun biopolymer nanofibers,” Crit Rev Food Sci Nutr., 48(8), pp. 775-797.

[48] Seema, A., Greiner, A., Wendorff, J, H., 2009, “Electrospinning of Manmade and Biopolymer Nanofibers—Progress in Techniques Materials, and Applications,” Adv. Funct. Mater., 19, pp. 2863–2879.

[49] Larsen, G., Velarde-Ortiz, R., Minchow, K., Barrero, A., Loscertales, I, G., 2003, “A Method for Making Inorganic and Hybrid (Organic/Inorganic) Fibers and Vesicles with Diameters in the Submicrometer and Micrometer

  

186  

Range via Sol-Gel Chemistry and Electrically Forced Liquid Jets,” J. Am. Chem. Soc., 125, pp. 1154-1155.

[50] Tomczak, N., Hulst, N, F, V., Vancso, G, J., 2005, “Beaded Electrospun Fibers for Photonic Applications,” Macromolecules., 38, pp. 7863-7866.

[51] Srivastava, Y., Loscertales, I., Marquez, M., Thorsen, T., 2008, “Electrospinning of hollow and core/sheath nanofibers using a microfluidic manifold,” Microfluid. Nanofluid., 4, 245-250.

[52] Lee, G, H., Song, J, C., Yoon, K, B., 2010, “Controlled wall thickness and porosity of polymeric hollow nanofibers by coaxial electrospinning,” Macronmolecular Research., 18, pp. 571-576.

[53] Vasita, R., Katti, D, S., 2006, “Nanofibers and their applications in tissue engineering,” Int. J. Int. J. Nanomed., 1(1), pp. 15–30.

[54] Chronakis, I, S., 2010, “Micro-/nanofibers by Electrospinning Technology: Processing, Properties and applications,”Micromanufacturing Engineering and Technology., pp. 264-286.

[55] Jenkins, R., Snyder, R, L., 1996, Introduction to X-ray Powder Diffractometry, John Wiley and Sons, New York.

[56] Dinnebier, R, E., Billinge, S, J, L., 2008, Powder Diffraction Theory and Practice, The Royal Society of Chemistry.

[57] Goldstein, J, I., Newbury, D, E., Echlin, D, C., Joy, C, F., Lifshin, E., 1981, Scanning Microscopy and X-Ray Microanalysis, Plenum Press, New York.

[58] Newbury, D., Joy, D, C., Fiori, E, C, E., Goldstein, J, I., 1986, Advanced Scanning Electron Microscopy and X-Ray Microanalysis, Plenum Press, New York.

[59] Reimer, L., 1985, Scanning Electron Microscopy, Springer-Verlag, Berlin. [60] Holt, D, B., Joy, D, C., 1989, SEM Micro characterization of

Semiconductors, Academic Press, London. [61] Heimendahl, M, V., 1980, Electron Microscopy of Material An Introduction,

Materials Science and Technology Series Academic, New York, pp. Chap. . [62] Bellamy, L, J., 1975, The infrared spectra of complex molecules, Chapman

and Hall, London. [63] Lambert, J, B., Shurvell, H, F., Lightner, D, A., Cooks, R, G., 1998, Organic

structural spectroscopy, Prentice-Hall, Inc., New Jersey. [64] Prime, R, B., Bair, H, E., Vyazovkin, S., Gallagher, P, K., Riga, A., 2009,

Thermogravimetric analysis (TGA), In Thermal analysis of polymers; fundamentals and applications, John Wiley and Sons, New York.

[65] Schonherr, T., 2003, Optical Spectra and Chemical Bonding in Inorganic Compounds, Springer, Berlin Heidelberg New York.

[66] Stillman, G, E., Lee, B., Kim, M, H., Bose, S, S., 1988, Describes the use of PL for quantitative impurity analysis in semiconductors, Elechochem. Soc., 56, pp. 88-20.

[67] Hurtubise, R, J., 1981, Solid State Luminescence Analysis, Marcel Dekker, New York.

[68] Queisser, H, J., 1976, “Describes PL measurements of a variety of semiconductor properties,” Appl. Phys., 10, pp. 275-292.

  

187  

[69] Lieber, C, M., 1998, “One Dimensional nanostructures: Chemistry, physics & Applications,” Solid State Commun., 107, pp. 607-624.

[70] Lu, X., Wang, C., Wei, Y., 2009, “One-Dimensional Composite Nanomaterials: Synthesis by Electrospinning and Their Applications,” Small., 21, pp. 1349-2370.

[71] Li, D., Xia, Y., 2004, “Electrospinning of Nanofibers: Reinventing the wheel?,” Adv. Mater., 14, pp. 1151-1170.

[72] Rutledge, G, C., Fridrikh, S, V., 2007, “Formation of fibers by electrospinning,” Adv. Drug Delivery Rev., 59, pp. 1384-1391.

[73] Renker, D, H., Chun, I., 1996, “Nanometer diameter fibers of polymer, produced by electrospinning,” Nanotechnology., 7, pp. 216-223.

[74] Li, D., Wang, Y., Xia, Y., 2003, “Electrospinning of Polymeric and Ceramic Nanofibers as Uniaxially Aligned Arrays,” Nano Lett., 3, pp. 1167-1171.

[75] Li, D., Xia, Y., 2004, “Direct Fabrication of Composite and Ceramic Hollow Nanofibers by Electrospinning,” Nano Lett., 4, pp. 933-938.

[76] Hench, L, L., West, J, K., 1990, “The Sol-Gel Process,” Chem. Rev., 90, pp. 33-72.

[77] Sakka, S., Toka, T., 1992, “Fibers from gel,” J. Non-Cryst. Solids., 147-148, pp. 394-403.

[78] Huang, Z, M., Zhang, Y, Z., Kotaki, M., Ramakrishna, S., 2003, “A review on polymer nanofibers by electrospinning and their applications in nanocomposites,” Compos. Sci. Technol., 63, pp. 2223-2253.

[79] Sawicka, K, M., Gouma, P., 2006, “Electrospun composite nanofibers for functional applications,” J. Nanopart. Res., 8, pp. 769–781.

[80] Meng, X., Zhang, Z., Luo, N., 2011, “Transparent Poly(methyl methacrylate)/TiO2 Nanocomposites for UV-shielding Applications,” Adv. Mater. Res., 239-242, pp. 1129-1136.

[81] Martinez, Y., Retuert, J., Pedram, M, Y., Colfen, H., 2007, “Transparent semiconductor–polymer hybrid films with tunable optical properties,” J. Mater. Chem., 17, pp. 1094-1101.

[82] Beecroft, L, L., Ober, C, K., 1997, “Nanocomposite Materials for Optical Applications,” Chem. Mater., 9, pp. 1302-1317.

[83] Deitzel, J, M., Kleinmeyer, J., Harris, D., Tan, N, C, B., 2001, “The effects of processing variables on the morphology of electrospun nanofibers and textiles,” Polymer., 42, pp. 261-272.

[84] Thompson, C, J., Chase, G, G., Yarin, A, L., Reneker, D, H., 2007, “Effects of parameters on nanofiber diameter determined from electrospinning model,” Polymer., 48, pp. 6913-6922.

[85] Lee, K, H., Kim, H, Y., Bang, H, J., Jung, Y, H., Lee, S, G., 2003, “The change of bead morphology formed on electrospun polystyrene fibers,” Polymer., 44, pp. 4029–4034.

[86] Stoiljkovic, A., Ishaque, M., Justus, U., Hamel, L., Klimov, E., Heckmann, W., Eckhardt, B., Wendorff, J, H., Greiner, A., 2007, “Preparation of water-stable submicron fibers from aqueous latex dispersion of water-insoluble polymers by electrospinning,” Polymer., 48, pp. 3974-3981.

  

188  

[87] Fong, H., Chun, I., Reneker, D, H., 1999, “Beaded nanofibers formed during electrospinning,” Polymer, 40, pp. 4585-4592.

[88] Heikkila, P., Harlin, A., 2008, “Parameter study of electrospinning of polyamide-6,” Eur. Polym. J., 44, pp. 3067–3079.

[89] Shao, C., Li, X., Guan, H., Liu, Y., Gong, J., 2004, “Electrospun nanofibers of NiO/ZnO composites,” Inorg. Chem. Commun., 7, pp. 625-627.

[90] Yang, X., Shao, C., Guan, H., Li, X., Gong, J., 2004, “Preparation and characterization of ZnO nanofibers by using elctrospun PVA/Zinc acetate composite as precursor,” Inorg. Chem. Commun., 7, pp. 176-178.

[91] Guan, H., Zhou, W., Fu, S., Shao, C., Liu, Y., 2009, “Electrospun nanofibers NiO/SiO2 composite,” J. Phys. Chem. Solids., 70, pp. 1374-1377.

[92] Patil, P, R., Joshi, S, S., 2007, “Polymerized Organic-Inorganic synthesis of nanocrystalline Zinc oxide,” Mater. Chem. Phys., 105, pp. 354-361.

[93] Sui, X, M., Shao, C, L., Liu, Y, C., 2005, “White light emission of polyvinyl alcohol/ZnO hybrid nanofibers prepared by elelctrspinning,” Appl.Phys.Lett., 87, pp. 113115-3.

[94] Hong, Y., Li, D., Zheng, J., Zou, G., 2006, “Insitu growth of ZnO nanocrystals from solid electrospun nanofibers matrixes,” Langmuir., 22, pp. 7331-7334.

[95] Yang, X., Shao, C., Guan, H., Li, X., Gong, Jian., 2004, “Preparation and characterization of ZnO nanofibers by using electrospun PVA/zinc acetate composite fiber as precursor,” Inorg. Chem. Commun., 7, pp. 176–178.

[96] Chronakis, I, S., 2005, “Novel nanocomposites and nanoceramics based on polymer nanofibers using electrospinning process—A review,” J. Mater. Process. Technol., 167, pp. 283–293.

[97] Qizheng, C., Xiangting, D., Jinxian, W., Qizheng, L, C., Xiangting, D., Jinxian, W, L., 2008, “Direct fabrication of cerium oxide hollow nanofibers by electrospinning,” J. Rare Earths., 26, pp. 664-669.

[98] Sriupayo, J., Supaphol, P., Blackwell, J., Rujiravanit, R., 2005, “Preparation and characterization of chitin whisker-reinforced poly vinyl alcohol nanocomposites films with or without heat treatment,” Polymer, 46, pp. 5637-5644.

[99] Sui, X, M., Shao, C, L., Liu, Y, C., 2005, “White light emission of polyvinyl alcohol/ZnO hybrid nanofibers prepared by elelctrspinning,” Appl. Phys. Lett., 87, pp. 113115-3.

[100] Sengupta, H, S., Ahluwalia, S, B., SEN, S, P., 1979, “Chemisorption of water vapour on Zinc Oxide,” J. Colloid Interface Sci., 69, pp. 217-224.

[101] Lu, X., Zhao, Y., Wang, C., 2005, “Fabrication of PbS Nanoparticles in Polymer-Fiber Matrices by Electrospinning,” Adv. Mater., 17, pp. 2485–2488.

[102] Seoudi, R., Mongy, S, A, E, Shabaka, A, A., 2008, “Effect of polyvinyl alcohol matrices on the structural and spectroscopic studies of CdSe nanoparticle,” Physica B., 403, pp. 1781–1786.

[103] Baalousha, M., Manciulea, A., Cumberland, S., Kendall, K., Lead, J, R., 2008, “Aggregation and surface properties of iron oxide nanoparticles:

  

189  

influence of ph and natural organic matter,” Environ. Toxicol. Chem., 27, pp. 1875-1882.

[104] Oberdisse, J., 2006, “Aggregation of colloidal nanoparticles in polymer matrices,” Soft Matter., 2, pp. 29–36.

[105] Akcora, P., Liu, H., Kumar, S, K., Moll, J., Li, Y., Benicewicz, B, C., Schadler, L, S., Acehan, D., Panagiotopoulos, A, Z., Pryamitsyn, V., Ganesan, V., Ilavsky, J., Thiyagarajan, P., Colby, R, H., Douglas, J, F., 2009, “Anisotropic self-assembly of spherical polymer-grafted nanoparticles,” Nat. Mater., 8, pp. 354-359.

[106] Li, G., Wang, T., Bhosale, S., Zhang, Y., Fuhrhop, J, H., 2003, “Completely reversible aggregation of nanoparticles by varying the pH,” Colloid Polym Sci., 281, pp. 1099-1103.

[107] Smith, G, D., Bedrov, D., 2009, “Dispersing Nanoparticles in a Polymer Matrix: Are Long, Dense Polymer Tethers Really Necessary?,” Langmuir., 25(19), pp. 11239–11243.

[108] Spagnoli, D., Banfield, J, F., Parker, S, C., 2008, “Free Energy Change of Aggregation of Nanoparticles,” J. Phys. Chem. C., 112, pp. 14731–14736.

[109] Vauthier, C., Cabane, B., Labarre, D., 2008, “How to concentrate nanoparticles and avoid aggregation?,” Eur. J. Pharm. Biopharm., 69, pp. 466–475.

[110] Porel, S., Venkatram, N., Rao. D, N., Radhakrishnan, T, P., 2007, “In Situ Synthesis of Metal Nanoparticles in Polymer Matrix and Optical Limiting Application,”J. Nanosci. Nanotechnol., 7, pp. 1-6.

[111] Rozenberg, B, A., Tenne, R., 2008, “Polymer-assisted fabrication of nanoparticles and nanocomposites,” Prog. Polym. Sci., 33, pp. 40–112.

[112] Wong, H, C., Cabral, J, T., 2010, “Nanoparticle aggregation behaviour in polymer nanocomposites: bulk vs. thin films,” J. Phys. Conf. Ser., 247, pp. 012046-12.

[113] Kendall, K., Kosseva, M, R., 206, “Nanoparticle aggregation influenced by magnetic fields,” Colloids Surf., A., 286, pp. 112–116.

[114] Balazs, A, C., Emrick, T., Russell, T, P., 2006, “Nanoparticle Polymer Composites: Where Two Small Worlds Meet,” Science., 314, pp. 1107-1110.

[115] Corbierrre, M, K., Cameron, N, S., Sutton, M., Mochrie, S, G, J., Lurio, L, B., Ruhm, A., Lennox, R, B., 2001, “Polymer-Stabilized Gold Nanoparticles and Their Incorporation into Polymer Matrices,” J. Am. Chem. Soc., 123, pp. 10411-10412.

[116] Li, D., Kaner, R, B., 2006, “Shape and Aggregation Control of Nanoparticles: Not Shaken, Not Stirred,” J. Am. Chem. Soc., 128, pp. 968-975.

  

190  

[117] Oberdisse, J., Hine, P., Hintzen, W, P., 2007, “Structure of interacting aggregates of silica nanoparticles in a polymer matrix: Small-angle scattering and Reverse Monte-Carlo simulations,” Soft Mater., 3, pp. 476-485.

[118] Sui, X., Shao, C., Liu, Y., 2007, “Photoluminescence of polyethylene oxide ZnO composite electrospun fibers,” Polymer., 48, pp. 1459-1463.

[119] Andrew, M., Smith., Shuming, N., 2010, “Semiconductor Nanocrystals: Structure, Properties, and Band Gap Engineering,” Acc. Chem. Res., 43(2), pp. 190-200.

[120] Giaume, D., Buissette, V., Lahlil, K., Gacoin, T., Boilot, J, P., Casanova, D., Beaurepaire, E., Sauviat, M, P., Alexandrou, A., 2005, “Emission properties and applications of nanostructured luminescent oxide nanoparticles,” Prog. Solid State Chem., 33, pp. 99-106.

[121] Manoj, N., Louis, B., 1999, “Luminescence Photophysics in Semiconductor Nanocrystals,” Acc. Chem. Res., 32, pp. 407-414.

[122] Xiong, H, M., Xie, D, P., Guan, X, Y., Tan, Y, J., Xia, Y, Y., 2007, “Water-stable blue-emitting ZnO@polymer core–shell microspheres,” J. Mater. Chem., 17, pp. 2490–2496.

[123] Willander, M., Nur, O., Sadaf, J, R., Qadir, M, I., Zman, S., Zainelabdin, A., Bano, N., Hussain, I., 2010, “Luminescence from Zinc Oxide Nanostructures and Polymers and their Hybrid Devices,” Materials., 3, pp. 2643-2667.

[124] Djurisic, A, B., Ng, A, M, C., Chen, X, Y., 2010, “ZnO nanostructures for optoelectronics: Material properties and device applications,” Prog. Quantum Electron., 34, pp.191–259.

[125] Willandera, M., Zhaoa, Q, X., Hub, Q, H., Klasonb, P., Kuzmin, V., Al-Hillib, S, M., Nura, O., Lozovik, Y, E., 2008, “Fundamentals and properties of zinc oxide nanostructures: Optical and sensing applications,” Superlattices Microstruct., 43, pp. 352–361.

[126] Pearton, S, J., Lim, W, T., Wright, J, S., Tien, L, C., Kim, H, S., Norton, D, P., Wang, H, T., Kang, B, S., Ren, F., Jun, J., Lin, J., Osinsky, A., 2008, “ZnO and Related Materials for Sensors and Light-Emitting Diodes,” J. Electron. Mater., 37, pp. 1426-1432.

[127] Wang, J., Gao, L., 2003, “Wet chemical synthesis of ultralong and straight single-crystalline ZnO nanowires and their excellent UV emission properties,” J. Mater. Chem., 13, pp. 2551–2554.

[128] Xiong, H, M., Liu, D, P., Xia, Y, Y., Chen, J, S., 2005, “Polyether-Grafted ZnO Nanoparticles with Tunable and Stable Photoluminescence at Room Temperature,” Chem. Mater., 17, pp. 3062-3064.

[129] Liao, Z, M., Zhang, H, Z., Zhou, Y, B., Xu, J., Zhang, J, M., Yu, D, P., 2008, “Surface effects on photoluminescence of single ZnO nanowires,” Phys. Lett. A., 372, pp. 4505–4509.

[130] Wu, Y, L., Tok, A, I, Y., Boey, F, Y, C., Zeng, X, T., Zhang, X, H., 2007, “Surface modification of ZnO nanocrystals,” Appl. Surf. Sci., 253, pp. 5473–5479.

[131] Guo, L., Yang, S., Yang, C., Yu, P., Wang, J., Ge, W., Wong, G, K, L., 2000, “Synthesis and Characterization of Poly (vinylpyrrolidone)-Modified Zinc Oxide Nanoparticles,” Chem. Mater., 12, pp. 2268-2274.

  

191  

[132] Djurisic, B., Leung, Y, H., Tam, K, H., Hsu, Y, F., Ding, L., Ge, W, K., Zhong, Y, C., Wong, K, S., Chan, W, K., Tam, H, L., Cheah, K, W., Kwok, W, M., Phillips, D, L., 2007, “Defect emissions in ZnO nanostructures,” Nanotechnology., 18, pp. 095702-24.

[133] Djurisic, A, B., Leung, Y, H., Tam, K, H., Ding, L., Ge, W, K., Chen, H, Y., Gwo, S., 2006, “Green, yellow, and orange defect emission from ZnO nanostructures: Influence of excitation wavelength,” App. Phy. Lett., 88, pp. 103107-3.

[134] Irimpan, L., Nampoori, V, P, N., Radhakrishnan, P., 2008, “Visible luminescence mechanism in nano ZnO under weak confinement regime,” J. Appl. Phys., 104, pp. 113112-5.

[135] Lukas, S, M., Judith, L, M, D., 2007, “ZnO–nanostructures, defects, and devices,” Mater. Today., 10, pp. 41-48.

[136] Li, D., Leung, Y, H., Djurisic, A, B., Liu, Z, T., Xie, M, H., Shi, S, L., Xu, S, J., Chan, W, K., 2004, “Different origins of visible luminescence in ZnO nanostructures fabricated by the chemical and evaporation methods,” Appl. Phys. Lett., 85, pp. 1786375-3.

[137] Xiang, L., Fei, Z, F., Ying, L., Sheng, C, M., Chi, W, F., Xiang, Z, X., 2007, “Synthesis and photoluminescence study on ZnO nano-particles,” Chin. Phys. Soc., 16, pp. 2769-2772.

[138] Leung, Y, H., Tam, K, H., Djurisic, A, B., Xie, M, H., Chan, W, K., Ding, L., Ge, W, K., 2005, “ZnO nanoshells: Synthesis, structure, and optical properties,” J. Cryst. Growth., 283, pp. 134–140.

[139] Qin, X., Zhou, D., Jianbo, L., Liqiang, X., Weichao, Y., Yitai, Q., 2005, “Synthesis of ZnO three-dimensional architectures and their optical properties,” Solid State Commun., 136, pp. 304–307.

[140] Ni, Y, H., Wei, X, W., Hong, J, M., Ye, Y., 2005, “Hydrothermal preparation and optical properties of ZnO nanorods,” Mater. Sci. Eng., B., 121, pp. 42-47.

[141] Yang, Z., Luan, C., Zhang, W., Liu, A., Tang, S., 2008, “Fabrication and opticalproperties of ZnO nanostructured thin films via mechanical oscillation and hydrothermal method” Thin Solid Films., 516, pp. 5974-5980.

[142] Pan, A., Yu, R., Xie, S., Zhang, Z., Jin, C., Zou, B., 2005, “ZnO flowers made up of thin nanosheets and their optical properties” J. Cryst. Growth., 282, pp. 165-172.

[143] Anderson, J., Chris, G, V, W., 2005, “Oxygen vacancies in ZnO,” App. Phy. Lett., 87, pp. 122102-3.

[144] Wang, Z, G., Zu, X, T., Yang, S, Z., Wang, L, M., 2006, “Blue luminescence from carbon modified ZnO nanoparticles,” J. Mater. Sci., 41, pp. 3729–3733.

[145] Harada, Y., Hashimoto, S., 2003, “Enhancement of band-edge photoluminescence of bulk ZnO single crystals coated with alkali halide,” Phys. Rev. B: Condens. Matter., 68, pp. 045421-4.

[146] Chen, W., Li, F., Chen, Y., Yuan, K., Chen, L., “Enhancement of the Ultraviolet Emission of ZnO Nanorods by Terphenyl Liquid-Crystalline Ligands Modification,” Appl. Surf. Sci., 257, pp. 8788-8793.

  

192  

[147] Kurbanov, S, S., Panin, G, N., Kim, T, W., Kang, T, W., 2007, “Luminescence of ZnO nanocrystals capped with an organic dye,” Opt. Commun., 276, pp. 127–130.

[148] Dev, A., Niepelt, R., Richters, J, P., Ronning, C., Voss, T., 2010, “Stable enhancement of near-band-edge emission of ZnO nanowires by hydrogen incorporation,” Nanotechnology., 21, pp. 065709-12.

[149] Comparelli, R., Fanizza, E., Curri, M, L., Cozzoli, P, D., Mascolo, G., Agostiano, A., 2005, “UV-induced photocatalytic degradation of azo dyes by organic-capped ZnO nanocrystals immobilized onto substrates,” Appl. Catal., B., 60, pp. 1-11.

[150] Xiong, H, M., Ma, R, Z., Wang, S, F., Xia, Y, Y., 2011, “Photoluminescent ZnO nanoparticles synthesized at the interface between air and triethylene glycol,” J. Mater. Chem., 21, pp. 3178-3182.

[151] Richters, J, P., Dev, A., Muller, S., Niepelt, R., Borschel, C., Ronning, C., Voss, T., “Influence of metallic coatings on the photoluminescence properties of ZnO nanowires,” Phys. Status Solidi RRL., 3, pp. 166–168.

[152] Du, X, W., Fu, Y, S., Sun, J., Han, X., Liu, J., 2006, “Complete UV emission of ZnO nanoparticles in a PMMA matrix,” Semicond. Sci. Technol. 21, pp. 1202–1206.

[153] Tong, Y, H., Liu, Y, C., Lu, S, X., Dong, L., Chen, S, J., Xiao, Z, Y., 2004, “The Optical Properties of ZnO Nanoparticles Capped with Polyvinyl Butyral,” J. Sol-Gel Sci. Technol., 30, pp. 157–161.

[154] Sharma, H., Sharma, S, N., Singh, G., Shivaprasad, S, M., 2007, “Studies of optical and structural properties of CdSe/polymer nanocomposites: evidence of charge transfer and photostability,” Colloid Polym Sci., 285, pp. 1213–1227.

[155] Guo, Z., Wei, S., Shedd, B., Scaffaro, R., Pereira, T., Hahn, H, T., 2007, “Particle surface engineering effect on the mechanical, optical and photoluminescent properties of ZnO/vinyl-ester resin nanocomposites,” J. Mater. Chem., 17, pp.806–813.

[156] Wang, Z., Huang, B., Liu, X., Qin, X., Zhang, X., Wei, J., Wang, P., Yao, S., Zhang, Q., Jing, X., 2008, “Photoluminescence studies from ZnO nanorod arrays synthesized by hydrothermal method with polyvinyl alcohol as surfactant,” Mater. Lett. 62, pp. 2637-2639.

[157] Patil, P, R., Joshi, S, S., 2007, “Polymerized organic–inorganic synthesis of nanocrystalline zinc oxide,” Mater. Chem. Phys., 105, pp. 354-361.

[158] Richters, J, P., Voss, T., Wischmeier, L., Ruckmann, I., Gutowski, J., 2008, “Near-Band-Edge Photoluminescence Spectroscopy of ZnO Nanowires Embedded in Polymers,” Journal of the Korean Physical Society., 53, pp. 2844-2846.

[159] Zhang, S, L., Djurisic, A, B., Hsu, Y, F., Ng, A, M, C., Xie, M, H., 2008, “Influence of different insulating polymers on the performance of ZnO nanorod based LEDs,” Proc. SPIE Int. Soc. Opt. Eng. 6988, pp. 698810-8.

[160] Somwangthanaroj, A., Suwanchatchai, K., Ando, S., Tanthapanichakoon, W., 2009, “Effect of zinc precursor on thermal and light emission properties

  

193  

of ZnO nanoparticles embedded in polyimide films,” Mater. Chem. Phys., 114, pp. 751-755.

[161] Liu, K, W., Chen, R., Xing, G, Z., Wu, T., Sun, H, D., 2010, “Photoluminescence characteristics of high quality ZnO nanowires and its enhancement by polymer covering,” Appl. Phys. Lett., 96, pp. 023111-3.

[162] Atienzar, P., Ishwara, T., Illy, B, N., Ryan, M, P., O’Regan, B, C., Durrant, J, R., Nelson, J., 2010, “Control of Photocurrent Generation in Polymer/ZnO Nanorod Solar Cells by Using a Soluti on-Processed TiO2 Overlayer,” J. Phys. Chem. Lett.,1, pp.708–713.

[163] Huang, H, C., Hsieh, T, E., 2010, “Preparation and characterizations of highly transparent UV-curable ZnO-acrylic nanocomposites,” Ceram. Int., 36, pp. 1245-1251.

[164] Gao, H., Yorifuji, D., Wakita, J., Jiang, Z, H., Ando, S., 2010, In situ preparation of nano ZnO/hyperbranched polyimide hybrid film and their optical properties,” Polymer, 51, pp. 3173-3180.

[165] Aimable, A., Buscaglia, M, T., Buscaglia, V., Bowen, P., 2010, “Polymer-assisted precipitation of ZnO nanoparticles with narrow particle size distribution,” J. Eur. Ceram. Soc., 30, pp. 591-598.

[166] Xiong, H, M., 2010, “Photoluminescent ZnO nanoparticles modified by polymers,” J. Mater. Chem., 20, pp. 4251–4262.

[167] Bera, A., Basak, d., 2009, “Effect of Surface Capping with Poly(vinyl alcohol) on the Photocarrier Relaxation of ZnO Nanowires,” ACS Appl. Mater. Interfaces., 9, pp. 2066–2070.

[168] Qin, L., Shing, C., Sawyer, S., Dutta, P, S., 2011, “Enhanced ultraviolet sensitivity of zinc oxide nanoparticle photoconductors by surface passivation,” Opt. Mater., 33, pp. 359–362.

[169] Hong, R, Y., Li, J, H., Chen, L, L., Liu, D, Q., Li, H, Z., Zheng, Y., Ding, J., 2009, “Synthesis, surface modification and photocatalytic property of ZnO nanoparticles,” Powder Technol., 189, pp. 426–432.

[170] Leea, M, K., Tu, H, F., 2007, “Ultraviolet emission blueshift of ZnO related to Zn,” J. Appl. Phys., 101, pp. 126103-3.

[171] Kurbanov, S, S., Panin, G, N., Kim, T, W., Kang, T,W., 2009, “Strong violet luminescence from ZnO nanocrystals grown by the low-temperature chemical solution deposition,” J. Lumin., 129, pp. 1099-1104.

[172] Guo, L., Ji, Y, L., Xu, H., Simo, P., Wu, Z., 2002, “Regularly Shaped, Single-Crystalline ZnO Nanorods with Wurtzite Structure,” J. Am. Chem. Soc., 124, pp. 14864-14865.

[173] Richters, J, P., Voss, T., Wischmeier, L., Ruckmann, I., Gutowski, J., 2008, “Influence of polymer coating on the low-temperature photoluminescence properties of ZnO nanowires,” Appl. Phys. Lett., 92, pp. 011103-3.

[174] Zhang, Z., Shao, C., Gao, F., Li, X., Liu, Y., 2010, “Enhanced ultraviolet emission from highly dispersed ZnO quantum dots embedded in poly(vinyl pyrrolidone) electrospun nanofibers,” J. Colloid Interface Sci., 347, pp. 215–220.

[175] Li, X, H., Shao, C, L., Liu, Y, C., Chu, X, Y., Wang, C, H., Zhang, B, X., 2008, “Photoluminescence properties of highly dispersed ZnO quantum dots

  

194  

in polyvinylpyrrolidone nanotubes prepared by a single capillary electrospinning,” J. Chem. Phys., 129, pp. 114708-5.

[176] Sui, X., Shao, C., Liu, Y., 2007, “Photoluminescence of polyethylene oxide ZnO composite electrospun fibers,” Polymer., 48, pp. 1459-1463.

[177] Zhang, J., Wen, B., Wang, F., Ding, Y., Zhang, S., Yang, M., 2011, “In Situ Synthesis of ZnO Nanocrystal/PET Hybrid Nanofibers via Electrospinning,” J. Polym. Sci., Part B: Polym. Phys., 49, pp. 1360-1368.

[178] Wang, D., Yang, J., Xing, G., Yang, L., Lang, J., Gao, M., Yao, B., Wu, T., 2009, “Abnormal blueshift of UV emission in single-crystalline ZnO nanowires, Journal of Luminescence,” 129, pp. 996-999.

[179] Hsieh, P, T., Chen, Y, C., Kao, K, S., Lee, M, S., Cheng, C, C., 2007, “The ultraviolet emission mechanism of ZnO thin film fabricated by sol–gel technology,” J. Eur. Ceram. Soc., 27, pp. 3815-3818.

[180] Quan, S, L., Lee, H, S., Lee, E, H., Park, K, D., Lee, S, G., Chin, I, J., 2010, “Ultrafine PMMA (QDs)/PVDF core–shell fibers for nanophotonic applications,” Microelectron. Eng., 87, pp. 1308-1311.

[181] Zhu, Z., Zhang, L., Smith, S., Fong, H., Sun, Y., Gosztola, D., 2009, “Fluorescence studies of electrospun MEH-PPV/PEO nanofibers,” Synth. Met., 159, pp. 1454-1459.

[182] http://www.iarc.fr/en/publications/pdfs-online/wrk/wrk1/ArtificialUVRad&SkinCancer.pdf

[183] http://www.eco-action.org/dt/ozone.html [184] FINAL Report on Carcinogens Background Document for Broad-Spectrum

Ultraviolet (UV) Radiation and UVA, and UVB, and UVC, Meeting of the NTP Board of Scientific Counselors Report on Carcinogens Subcommittee, U.S. Department of Health and Human Services Public Health Service National Toxicology Program Research Triangle Park, NC 27709

[185] Han, Y., Wu, G., Li, H., Wang, M., Chen, H., 2010, “Highly efficient ultraviolet photodetectors based on TiO2 nanocrystal-polymer composites via wet processing,” Nanotechnology, 21, pp. 185708-185712.

[186] Zou, J., Zhang, Q., Huang, K., Marzari, N., 2010, “Ultraviolet photodetectors based on Anodic TiO2 nanotube arrays,” J. Phys. Chem. C., 114, pp. 10725-10729.

[187] BenMoussa, A., Soltani, A., Schuhle, U., Haenen, K., Chong, Y, M., Zhang, W, J., Dahal, R., Lin, J, Y., Jiang, H, X., Barkad, H, A., BenMoussa, B., Bolsee, D., Hermans, C., Kroth, U., Laubis, C., Mortet, V., Jaeger, J, C, D., Giordanengo, B., Richter, M., Scholze, F., Hochedez, J, F., 2009, “Recent developments of wide-bandgap semiconductor based UV sensors,” Diamond and Related Materials, 18, pp. 860-864.

[188] Zheng, X, J., Chen, Y, Q., Zhang, T., Yang, B., Jiang, C, B., Yuan, B., Zhu, Z., 2010, “Photoconductive semiconductor switch based on ZnS nanobelts film,” Sens. Actuators, B., 147, pp. 442-446.

[189] Lee, J, W., Moon, J, W., Ham, M, H., Myoung, J, M., 2008, “Dielectrophoretic assembly of GaN nanowires for UV sensor applications,” Solid State Commun., 148, pp. 194-198.

  

195  

[190] Calvani, P., Girolami, M., Carta, S., Rossi, M, C., Conte, G., 2009, “Optoelectronic performance of GaN-based UV photodetectors,” Nucl. Instrum. Methods Phys. Res., Sect. A., 610, 2009, pp. 311-313.

[191] Ueda, Y., Akita, S., Nomura, Y., Nakayama, Y., Naito, H., 2008, “Study of high temperature photocurrent properties of 6H–SiC UV sensor,” Thin Solid Films., 517, pp. 1471-1473.

[192] Ghosh, R., Dutta, M., Basak, D., 2007, “Self-seeded growth and ultraviolet photoresponse properties of ZnO nanowire arrays,” Appl. Phys. Lett., 91, pp. 073108-11.

[193] Chen, K, J., Hung, F, Y., Chang, S, J., Younga, S, J., 2009, “Optoelectronic characteristics of UV photodetector based on ZnO nanowire thin films,” J. Alloys Compd., 479, pp. 674-677.

[194] Liu, K, W., Ma, J, G., Zhang, J, Y., Lu, Y, M., Jiang, D, Y., Li, B, H., Zhao, D, X., Zhang, Z, Z., Yao, B., Shen, D, Z., 2007, “Ultraviolet photoconductive detector with high visible rejection and fast photoresponse based on ZnO thin film,” Solid State Electron., 51, pp. 757-761.

[195] Umar, A., Kim, S, H., Kim, J, H., Park, Y, K., Hahn, Y, B., 2007, “Structural and optical properties of single-crystalline ultraviolet-emitting needle-shaped ZnO nanowires,” Mater Lett., 61, pp. 4954-4958.

[196] Yang, H, Y., Son, D, I., Kim, T, W., Lee, J, M., Park, W, I., 2010, “Enhancement of the photocurrent in ultraviolet photodetectors fabricated utilizing hybrid polymer-ZnO quantum dot nanocomposites due to an embedded grapheme layer,” Org. Electron., 11, pp. 1313-1317.

[197] Li, Y., Dong, X., Cheng, C., Zhou, X., Zhang, P., Gao, J., Zhang, H., 2009, “Fabrication of ZnO nanorod array-based photodetector with high sensitivity to ultraviolet,” Physica B., 404, pp. 4282-4285.

[198] Sharma, B, K., Khare, N., Ahmad, S., 2009, “A ZnO/PEDOT:PSS based inorganic/organic hetrojunction,” Solid State Commun., 149, pp. 771-774.

[199] Cheng, J., Zhang, Y., Guo, R., 2008, “ZnO microtube ultraviolet detectors,” J. Cryst. Growth., 310, pp. 57-61.

[200] Xie, R., Sekiguchi, T., Ishigaki, T., Ohashi, N., Li, D., Yang, D., Liu, B., Bando, Y., 2006, “Enhancement and patterning of ultraviolet emission in ZnO with an electron beam,” Appl. Phys. Lett., 88, pp. 134103-3.

[201] He, H, J., Ho, S, T., Wu, T, B., Chen, L, J., Wang, Z, L., 2007, “Electrical and photoelectrical performances of nano-photodiode based on ZnO nanowires,” Chem. Phys. Lett., 435, pp. 119-122.

[202] Zheng, X, G., Li, Q, S., 2008, “Ultraviolet detectors based on ZnO films by thermal oxidation of Zn metallic films,” Cent. Eur. J. Phys., 6(2), pp. 351-355.

[203] Jablonski, N, G., Chaplin, G., 2010, “Human skin pigmentation as an adaptation to UV radiation” PNAS., 107, pp. 8962–8968.

[204] http://www.arpansa.gov.au/radiationprotection/basics/uvr.cfm [205] http://www.fda.gov/Radiation-

EmittingProducts/RadiationEmittingProductsandProcedures/Tanning/ucm116425.htm

[206] http://www.who.int/uv/publications/en/occupational_risk.pdf

  

196  

[207] http://www.arpansa.gov.au/Publications/Codes/rps12.cfm [208] Omnes, F., Monroy, E., Munoz, E., Reverchon, J, L., 2007, “Wide bandgap

UV photodetectors: A short review of devices and Applications,” Proc. SPIE Int. Soc. Opt. Eng., 6473, pp. 64730E-09.

[209] Das, S, N., Moon, K, J., Kar, J, P., Choi, J, H., Xiong, J., Lee, T, I., Myoung, J, M., 2010, “ZnO single nanowire-based UV detectors,” Appl. Phys. Lett., 97, pp. 022103.

[210] Li, Y., Valle, F, D., Simonnet, M., Yamada, I., Delaunay, J, J., 2009, “High-performance UV detector made of ultra-long ZnO bridging nanowires,” Nanotechnology., 20, pp. 045501.

[211] Su, Y, K., Peng S, M., Ji L, W., Wu C, Z., Cheng W, B., Liu C. H., 2010, “Ultraviolet ZnO Nanorod photosensors,” Langmuir., 26(1), pp. 603-606.

[212] Chang, S., Lu, C., Chang, S., Chiou, Y., Hsueh, T., Hsu, C., “Electrical and Optical characteristics of UV Photodetector with Interlaced ZnO Nanowires,” IEEE J. Sel. Top. Quantum Electron., 17(4), pp. 990-995.

[213] Yuan, B., Zheng, X, J., Chen, Y, Q., Yang B., Zhang, T., 2011, “High photosensitivity and low dark current of photoconductive semiconductor switch based on ZnO single nanobelt,” Solid State Electron., 55, pp. 49-53.

[214] Chang S, L., Myung-Chul, P., Qin K., Yulin D., Ashok K, S., Dennis L, P., Zhong L, W., 2007, “Giant Enhancement in UV Response of ZnO Nanobelts by Polymer Surface-Functionalization,” J. Am. Chem. Soc., 129, pp. 12096-12097.

[215] Joondong, K., Ju-Hyung, Y., Sang-Won, J., Yun, C, P., Minkyu, J., Seokkyu, H., Youngkuk, K., Jae-Hyun, K., Wayne, A, A., 2011, “Rapid thermal annealed Al-doped ZnO film for a UV detector,” Mater. Lett., 65, pp. 786-789.

[216] Zhengtao Zhu., Lifeng Zhang., Jane Y. Howe., Yiliang Liao., Jordan T. Speidel., Steve Smith., Hao Fong., 2009, “Aligned electrospun ZnO nanofibers for simple and sensitive ultraviolet nanosensors,” Chem. Commun., 18, pp. 2568-2570.

[217] Cheng-Liang, H., Shoou-Jinn, C., Yan-Ru, L., Pin-Chou, L., Tzer-Shen, Lin., Song-Yeu, T., Tsung-Heng, L., I-Cherng C., 2005, “Ultraviolet photodetectors with low temperature synthesized vertical ZnO nanowires,” Chem. Phys. Lett., 416, pp. 75-78.

[218] Chai, G., Lupan, O., Chow, L., Heinrich, H., 2009, “Crossed zinc oxide nanorods for ultraviolet radiation detection,” Sens. Actuators, A., 150, pp. 184-187.

[219] Kind, H., Yan, H., Messer, B., Law, M., Yang, P., 2002, “Nanowire Ultraviolet Photodetectors and Optical Switches,” Adv. Mater., 14, pp. 158-160.

[220] Ghosh, T., Basak, D., 2010, “High efficient ultraviolet photodetection in nanocolumnar RF sputtered ZnO films: a comparison between sputtered, sol-gel and aqueous chemically grown nanostructures,” Nanotechnology., 21, pp. 375202-6.

[221] Gimenez, A, J., Yanez-Limon, J, M., Seminario, J, M., 2011, “ZnO-Paper Based Photoconductive UV Sensors,” J. Phys. Chem. C., 115, pp. 282-287.

  

197  

[222] Lupan, O., Chow, L., Chai, G., 2009, “A single ZnO tetrapod-based sensor,” Sens. Actuators, B., 141, pp. 511-517.

[223] Bera, A., Basak, D., 2009, “Role of defects in the anomalous photoconductivity in ZnO nanowires,” Appl. Phys. Lett., 94, pp. 163119-3.

[224] Seong, H., Yun, J., Jun, J, H., Cho, K., Kim, S., 2009, “The transfer of charge carriers photogenerated in ZnO nanoparticles into a single ZnO nanowire,” Nanotechnology., 20, pp. 245201-4.

[225] Li, H., Fan, C., Wu, G., Chen, H., Wang, M., 2010, “Solution-processed hybrid bilayer photodetectors with rapid response to ultraviolet radiation,” J. Phys. D: Appl. Phys., 43, pp. 425101-3.

[226] Qin, L., Shing, C., Sawyer, S., Dutta, P, S., 2011, “Enhanced ultraviolet sensitivity of zinc oxide nanoparticle photoconductors by surface passivation,” Opt. Mater., 33, pp. 359-362.

[227] Li, Y., Gong, J., Deng, Y., 2010, “Hierarchical structured ZnO nanorods on ZnO nanofibers and their photoresponse to UV and visible lights,” Sens. Actuators, A., 158, pp. 176-182.

[228] E. Mollow, in Proceedings of the Photoconductivity Conference, edited by R. G. Breckenridge (Wiley, New York, 1954), pp. 509-512.

[229] Zhu, Z., Zhang, L., Howe J, Y., Liao Y., Speidel J, T., Smithb, S., Fong, H., 2009, “Aligned electrospun ZnO nanofibers for simple and sensitive ultraviolet Nanosensors,” Chem. Commun., pp. 2568–2570.

[230] Saladi, R, N., Persaud, A, N., 2005, “The causes of skin cancer: A comprehensive review,” Drugs Today., pp. 37-52.

[231] Lee, S., 2009, “Developing UV-protective textiles based on Electrospun Zinc oxide nanocomposite fibers,” Fibers Polym., 10, pp. 295-301.

[232] Tu, Y., Zhou, L., Jin, Y, Z., Gao, C., Ye, Z, Z., Yang, Y, F., Wang, Q, L., 2010, “Transparent and flexible thin films of ZnO-polystyrene nanocomposite for UV-shielding applications,” J. Mater. Chem., 20, pp. 1594-1599.

[233] Wang, R, H., Xin, J, H., Tao, X, M., 2005, “UV-blocking property of Dumbbell-shaped ZnO crystallites on cotton fabrics,” Inorg. Chem., 44, pp. 3926-3930.

[234] Lu, C., Cui, Z., Li, Z., Yang, B., Shen, J., 2003, “High refractive index thin films of ZnS/polythiourethane nanocomposite,” J. Mater. Chem., 13, pp. 526-530.

[235] Wang, L., Zhang, X., Li, B., Sun, P., Yang, J., Xu, H., Liu, Y., 2011, “Superhydrophobic and Ultraviolet-blocking cotton textiles,” ACS Appl. Mater. Interfaces., 3, pp. 1277-1281.

[236] Li, Q., Mahendra, S., Lyon, D, Y., Brunet, L., Liga, M, V., Li, D., Alvarez, P, J., 2008, “Antimicrobial nanomaterials for water disinfection and microbial control: Potential applications and implications,” Water Research., 4 2, pp. 4 5 9 1–4 6 0 2.

[237] Ales, P, C., Milan, K., Renata, V., Robert, P., Jana, S., Vladimır, K., Petr, H., Radek, Z., Libor, K., 2009, “Antifungal activity of silver nanoparticles against Candida spp,” Biomaterials., 30, pp. 6333–6340.

  

198  

[238] Perelshtein, I., Applerot, G., Perkas, N., Wehrschetz-Sigl, E., Hasmann, A., Guebitz, G, M., Gedanken, A., 2009, “Antibacterial properties of an in situ generated and simultaneously deposited nanocrystalline ZnO on fabrics,” ACS Appl. Mater. Interfaces., 2(1), pp. 363–366.

[239] Enjuoo, B., Hee-Jin, P., Jeonjin, L., Younghun, K., Jeyong, Y., Kwangsik, P., Kyunghee, C., Jongheop, Y., 2010, ”Bacterial cytotoxicity of the silver nanoparticle related to Physicochemical metrics and agglomeration properties,” Environ. Toxicol. Chem., 29(10), pp. 2154–2160.

[240] Yuvaraj, D., Kaushik, R., Narasimha, R, K., 2010, “Optical, Field- Emission, and Antimicrobial properties of ZnO nanostructured films deposited at room temperature by activated evaporation,” ACS Appl. Mater. Interfaces., 2 (4), pp. 1019–1024.

[241] Amin, S, A., Pazouki, M., Hosseinnia, A., 2009, “Synthesis of TiO2-Ag nanocomposite with sol-gel method and investigation of its antibacterial activity against E. coli,” Powder Technol., 196, pp. 241-245.

[242] Yanmin, W., Guojun, D., Hong, L., Duo, L., Shubin, Q., Na, W., Chenguo, H., Xutang, T., Jun, J., Jiyang, W., Zhong, L, W., 2008, “Nanostructured Sheets of Ti-O Nanobelts for Gas Sensing and Antibacterial Applications,” Adv. Funct. Mater., 18, pp. 1–7.

[243] Sambhy, V., MacBride, M, M., Peterson, B, R., Sen, A., 2006, “Silver bromide nanoparticle/polymer composites: Dual action tunable antimicrobial materials,” J. Am. Chem. Soc., 128, pp. 9798-9808.

[244] Rangari, V, K., Mohammad, G, M., Jeelani, S., Hundley, A., Vig, K., Singh, S, R., Pillai, S., 2010, “Synthesis of Ag/CNT hybrid nanoparticles and fabrication of their Nylon-6 polymer nanocomposite fibers for antimicrobial applications,” Nanotechnology., 21, pp. 095102-6.

[245] Qin, Y., Zhu, C., Chen, J., Zhong, J., 2007, “Preparation and characterization of Silver containing Chitosan fibers,” J. Appl. Polym. Sci., 104, pp. 3622-3627.

[246] Applerot, G., Lipovsky, A., Dror, R., Perkas, N., Nitzan, Y., Lubart, R., Gedanken, A., 2009, “Enhanced antibacterial activity of nanocrystalline ZnO due to increased ROS-mediated cell injury,” Adv. Funct. Mater., 19, pp. 842-852.

[247] Tawale, J, S., Dey, K, K., Pasricha, R., Sood, K, N., Srivastava, A, K., 2010, “Synthesis and characterization of ZnO tetrapods for optical and antibacterial applications,” Thin Solid Films., 519, pp. 1244-1247.

[248] Thanh, N, V, K., Phong, N, T, P., 2009, “Investigation of antibacterial activity of cotton fabric incorporating nano silver colloid,” J. Phys., 187, pp. 012072-8.

[249] Son, W, K., Youk, J, H., Park, W, H., 2006, “Antimicrobial cellulose acetate nanofibers containing silver nanoparticles,” Carbohydr. Polym., 65, pp. 430-434.

[250] Du, W, L., Xu, Y, L., Fan, C, L., 2008, “Preparation, characterization and antibacterial properties against E. coli K88 of Chitosan nanoparticle loaded copper ions,” Nanotechnology., 19, pp. 085707-3.

  

199  

[251] Wang, J., Zhu, Y., Bawa, H, K., Ng, G., Wu, Y., Libera, M., Van der Mei, H, C., Busscher, H, J., Yu, X., 2011, “Oxygen-generating nanofiber cell scaffolds with antimicrobial properties,” ACS Appl. Mater. Interfaces., 3(1), pp. 67-73.

[252] Perelshtein, I., Applerot, G., Perkas, N., Wehrschetz-Sigl, E., Hasmann, A., Guebitz, G. M., Gedanken, A., 2009, “Antibacterial properties of an in situ generated and simultaneously deposited nanocrystalline ZnO on fabrics,” ACS Appl. Mater. Interfaces, 2(1), pp. 363–366.

[253] Koga, H., Kitaoka, T., Wariishi, H., 2009, “In situ synthesis of silver nanoparticles on zinc oxide whiskers incorporated in a paper matrix for antibacterial applications,” J. Mater. Chem., 19, pp. 2135-2140.

[254] Vigneshwaran, N., Kumar, S., Kathe, A, A., Varadharajan, P, V., Prasad, V., 2006, “Functional finishing of cotton fabrics using zinc oxide-soluble starch nanocomposites,” Nanotechnology., 17, pp. 5087-5095.

[255] Sreekumar, T, V., Das, A., Chandra, L., Srivastava, A., Rao, K, U, B., 2009, “Inherently colored antimicrobial fibers employing silver nanoparticles,” J. Biomed. Nanotechnol., 5, pp. 1-6.

[256] Morones, J, R., Elechiguerra, J, L., Camacho, A., Holt, K., Kouri, J, B., Ramirez, J, T., Yacaman, M, J., 2005, “The bactericidal effect of silver nanoparticles,” Nanotechnology., 16, pp. 2346-2353.

[257] Wu, Y., Jia, W., An, Q., Liu, Y., Chen, J., Li, G., 2009, “Multiaction antibacterial nanofibrous membranes fabricated by electrospinning: an excellent system for antibacterial applications,” Nanotechnology., 20, pp. 245101-6.

[258] Roberta, B., Roselyne, F., Nicolas, B., Shakib, D., Marc, F, B., Fernand, F., 2006, “Toxicological impact studies based on Escherichia coli bacteria in ultrafine ZnO nanoparticles colloidal medium,” Nano Lett., 6, pp. 866-870.

[259] Jones, N., Ray, B., Ranjit, K, T., Manna, A, C., 2008, “Antibacterial activity of ZnO nanoparticle suspension on a broad spectrum of microorganisms,” FEMS Microbiol Lett., 279, pp. 71-76.

[260] Dastjerdi, R., Montazer, M., 2010, “A review on the application of inorganic nano-structured materials in the modification of textiles: Focus on anti-microbial properties,” Colloids Surf., B., 79, pp. 5-18.

[261] Padmavathy, N., Vijayaraghavan, R., 2008, “Enhanced bioactivity of ZnO nanoparticles-an antimicrobial study,” Sci. Technol. Mater., 9, pp. 035004-6.

[262] Vimala, K., Murali M. Y., Samba, S. K., Varaprasad, K., Ravindra, S., Narayana R. N., Padma, Y., Sreedhar, B., MohanaRaju, K., 2010, “Fabrication of porous chitosan films impregnated with silver nanoparticles: A facile approach for superior antibacterial application,” Colloids Surf., B., 76, pp. 248–258.

[263] Inphonlek, S., Pimpha, N., Sunintaboon, P., 2010, “Synthesis of poly (methyl methacrylate) core/chitosan-mixed-polyethyleneimine shell nanoparticles and their antibacterial property,” Colloids Surf., B., 77, pp. 219–226.

  

200  

[264] Xiao-fang, L., Xiao-qiang, F., Sheng, Y., Guo-qing, F., Ting-pu, W., Zhong-xing, S., 2010, “Chitosan kills Escherichia coli through damage to be of cell membrane mechanism,” Carbohydr. Polym., 79, pp. 493–499.

[265] Jean-Paul, M., Richard, J, O, H., Stepan, J, M., Maria, A. B., Kevin, G, M., 2009, “ZnO films grown by pulsed – laser deposition on soda lime glass substrates for ultraviolet inactivation of Staphylococcus epidermidis biofilms,” Sci. Technol. Adv. Mater., 10, pp. 045003-7.

[266] Wahab, R., Mishra, A., Yun, S, I., Kim, Y, S., Shin, H, S., 2010, “Antibacterial activity of ZnO nanoparticles prepared via non-hydrolytic solution route,” Appl Microbiol Biotechnol., 87, pp. 1917-1925.

[267] Jiang, W., Mashayekhi, H., Xing, B., 2009, “Bacterial toxicity comparision between nano- and micro-scaled oxide particles,” Environ. Pollut., 157, pp. 1619-1625.

[268] Yamamoto, O., 2001, “Influence of particle size on the antibacterial activity of zinc oxide,” Int. J. Inorg. Mater., 3, pp. 643-646.

[269] Tam, K, H., Djurisic, A, B., Chan, C, M, N., Xi, Y, Y., Tse, C, W., Leung, Y, H., Chan, W, K., Leung, F, C, C., Au, D, W, T., 2008, “Antibacterial activity of ZnO nanorods prepared by hydrothermal method,” Thin Solid Films., 516, pp. 6167-6174.

[270] Lingling, Z., Yunhong, J., Yulong, D., Malcolm, P., David, Y., 2007, “Investigation into the antibacterial behaviour of suspensions of ZnO nanoparticles (ZnO nanofluids),” J. Nanopart. Res., 9, pp. 479–489.

[271] Harris, L, G., Richards, R, G., 2004, “Staphylococcus aureus adhesion to different treated titanium surfaces,” J. Mater. Sci. - Mater. Med., 15, pp. 311–314.

[272] Jingyuan, L., Dadong, G., Xuemei, W., Huangping, W., Hui, J., Baoan, C., 2010, “The Photodynamic Effect of Different Size ZnO Nanoparticles on Cancer Cell Proliferation In Vitro,” Nanoscale Res. Lett., 5, pp. 1063–1071.

[273] Sivakumar, P, M., Balaji, S., Prabhawathi, V., Neelakandan, R., Manoharan, P, T., Doble, M., 2010, “Effective antibacterial adhesive coating on cotton fabric using ZnO nanorods and chalcone,” Carbohydr. Polym., 73, pp. 717–723.

[274] Peter, K, S., Rosalyn, L, K., George, L, M., Kenneth, J, K., 2002, “Metal oxide nanoparticles as bactericidal agents,” Langmuir., 18, pp. 6679–6686.

[275] Zhongbing, H., Xu, Z., Danhong, Y., Guangfu, Y., Xiaoming, L., Yunquing, K., Yadong, Y., Di, H., Baoqing, H., 2008, “Toxicological effect of ZnO Nanoparticles based on Bacteria,” Langmuir., 24(8), pp. 4140–4144.

[276] Xiong, J., Das, S, N., Shin, B., Kar, J, P., Choi, J, H., Myoung, J, M., 2010, “Biomimetic hierarchical ZnO structure with superhydrophobic and antireflective properties,” J. Colloid Interface Sci., 350, pp. 344-347.

[277] Ma, M., Gupta, M., Li, Z., Zhai, L., Gleason, K, K., Cohen, R, E., Rubner, M, F., Rutledge, G, C., 2007, “Decorated Electrospun Fibers Exhibiting Superhydrophobicity,” Adv. Mater., 19, pp. 255–259

[278] Furstner, R., Barthlott, W., Neinhuis, C., Walzel, P., 2005, “Wetting and Self-Cleaning Properties of Artificial Superhydrophobic Surfaces,” Langmuir, 21, pp. 961-964.

  

201  

[279] Koch, K., Dommisse, A., Niemietz, A., Barthlott, W., Wandelt, K., 2009, “Nanostructure of epicuticular plant waxes: Self-assembly of wax tubules,” Surf. Sci., 603, pp. 1961–1968.

[280] Ma, M., Hill, R, M., 2006, “Superhydrophobic surfaces,” Curr. Opin. Colloid Interface Sci., 11, pp. 193–202.

[281] Ward, W, E., 1952, “The Lotus Symbol: Its Meaning In Buddhist Art and Philosophy,” J. Aes. Art Crit., 11, pp. 135-141.

[282] Solga, A., Cerman, Z., Striffler, B, F., Spaeth, M., Barthlott, W., 2007, “The dream of staying clean: Lotus and biomimetic surfaces,” Bioinspiration Biomimetics., 2, pp. S126-S128.

[283] Herminghaus, S., 2000, “Roughness-induced non-wetting,” Europhys. Lett., 52 (2), pp. 165–170.

[284] Parker, A, R., Lawrence, C, R., 2001, “Water capture by a desert beetle,” Nature., 414, pp. 33-38.

[285] Guo, Z., Liu, W., Su, B, L., 2011, “Superhydrophobic surfaces: From natural to biomimetic to functional,” J. Colloid Interface Sci., 353, pp. 335–355.

[286] Guo, Z, G., Liu, W, M., 2007, “Biomimic from the superhydrophobic plant leaves in nature: Binary structure and unitary structure,” Plant Sci., 172, pp. 1103-1109.

[287] Sun, T., Feng, L, L., Gao, U., Jiang, L., 2005, “Bioinspired Surfaces with Special Wettability,” Acc. Chem. Res., 38, pp. 644-652.

[288] Gao, X., Jiang, L., 2004, “Water-repellent legs of water striders,” Nature., 432, pp. 4-8.

[289] Feng, X., Jiang, L., 2006, “Design and Creation of Superwetting/Antiwetting Surfaces” Adv. Mater., 18, pp. 3063-3078.

[290] Shang H, M., Wang, Y., Takahashi K., Cao, G, Z., Li, D., Xia, N., 2005, “Nanostructured superhydrophobic surfaces,” J. Mater. Sci. Lett., 40, pp. 3587-3591.

[291] McHale, G., Newton, M, I., Shirtcliffe, N, J., Geraldi, N, R., 2011, “Capillary origami: superhydrophobic ribbon surfaces and liquid marbles,” Beilstein J. Nanotechnol., 2, pp. 145-151.

[292] Kang, M., Jung, R., Kim, H, S., Joon, H, J., 2008, “Preparation of superhydrophobic polystyrene membranes by electrospinning,” Colloids Surf., A., 313, pp. 411-414.

[293] Roach, P., Shirtcliffe, N, J., Newton, M, I., 2008, “Progess in superhydrophobic surface development,” Soft Mater., 4, pp. 224-240.

[294] Nosonovsky, M., Bhusan, B., 2009, “Superhydrophobic surfaces and emerging applications: Non-adhesion, energy, green engineering,” Curr. Opin. Colloid Interface Sci., 14, pp. 270–280.

[295] Tsougeni, K., Vourdas, N., Tserepi, A., Gogolides, E., 2009, “Mechanisms of Oxygen Plasma Nanotexturing of Organic Polymer Surfaces: From Stable Super Hydrophilic to Super Hydrophobic Surfaces,” Langmuir., 25(19), pp. 11748–11759.

[296] Jiang, L., Zhao, Y., Zhai, J., 2004, “A Lotus-Leaf-like Superhydrophobic Surface: A Porous Microsphere/Nanofiber Composite Film Prepared by Electrohydrodynamics,” Angew. Chem. Int. Ed., 43, pp. 4338-4341.

  

202  

[297] Zhou, Y., He, B., Yang, Y., Wang, F., Liu, W., Wang, P., Zhang, W., Bello, I., Lee, S, T., 2011, “Construct hierarchical superhydrophobic silicon surfaces by chemical etching,” J. Nanosci. Nanotechnol., 11, pp. 2292-7.

[298] Qian, B., Shen, Z., 2005, “Fabrication of Superhydrophobic Surfaces byDislocation-Selective Chemical Etching on Aluminum, Copper, and Zinc Substrates,” Langmuir., 21, pp. 9007-9009.

[299] Cardoso, M, R., Tribuzi, V., Balogh, D, T., Misoguti, L., Mendonc¸ C, R., 2011, “Laser microstructuring for fabricating superhydrophobic polymeric surfaces,” Appl. Surf. Sci., 257, pp. 3281–3284.

[300] Teshimaa, K., Sugimurab, H., Inouec, Y., Takaic, O., Takano, A., 2005, “Transparent ultra water-repellent poly(ethylene terephthalate) substrates fabricated by oxygen plasma treatment and subsequent hydrophobic coating,” Appl. Surf. Sci., 244, pp. 619–622.

[301] Guo, Z., Zhou, F., Hao J., Liu, W., 2005, “Stable Biomimetic Super-Hydrophobic Engineering Materials,” J. Am. Chem. Soc., 127, pp. 15670-15671.

[302] Ma, M., Yu M., Gupta, M., Gleason, K, K., Rutledge, G, C., 2005, “Superhydrophobic Fabrics Produced by Electrospinning and Chemical Vapor Deposition,” Macromolecules., 38, pp. 9742-9748.

[303] Minglin M., Yu M., Malancha G., Karen K. G., Gregory C. R, 2005, “Superhydrophobic Fabrics Produced by Electrospinning and Chemical Vapor Deposition” Macromolecules., 38, pp. 9742-9748.

[304] Tadanaga, K., Morinaga, J., Matsuda, A., Minami, T., 2000, “Superhydrophobic-Superhydrophilic Micropatterning on Flowerlike Alumina Coating Film by the Sol-Gel Method,” Chem. Mater., 12, pp. 590-592.

[305] He, G., Wang, K., 2011, “The super hydrophobicity of ZnO nanorods fabricated by electrochemical deposition method,” Appl. Surf. Sci., 15, pp. 6590- 6594.

[306] Stachewicz, U., Barber, A, H., 2011, “Enhanced Wetting Behavior at Electrospun Polyamide Nanofiber Surfaces,” Langmuir., 27, pp. 3024-3029.

[307] Kwak, G., Seol, M., Tak, Y., Yong, K., 2009, “Superhydrophobic ZnO Nanowire Surface: Chemical Modification and Effects of UV Irradiation,” J. Phys. Chem. C., 113, pp. 12085–12089.

[308] Li, Y., Cai, W., Duan, G., Cao, B., Sun, F., Lu, F., 2005, “Superhydrophobicity of 2D ZnO ordered pore arrays formed by solution-dipping template method,” J. Colloid Interface Sci., 287, pp. 634-639.

[309] Das, S, N., Choi, J, H., Kar, J, P., Myoung, J, M., 2009, “Tunable and reversible surface wettability transition of vertically aligned ZnO nanorod arrays,” Appl. Surf. Sci., 255, pp. 7319-7322.

[310] Hwang, J, H., Lee, B, I., Klep, V., Luzinov, I., 2008, “Transparent hydrophobic organic–inorganic nanocomposite films,” Mater. Res. Bull. 43, pp. 2652–2657.

[311] Lv, J., Zhu, J., Huang, K., Meng, F., Song, X., Sun, Z., 2011, “Tunable surface wettability of ZnO nanorods prepared by two-step method,” Appl. Surf. Sci., 17, pp. 7534-7538.

  

203  

[312] Zhou, X., Guo, X., Ding, W., Chen, Y., 2008, “Superhydrophobic or superhydrophilic surfaces regulated by micro-nano structured ZnO powders,” Appl. Surf. Sci., 255, pp. 3371-3374.

[313] Lu, J., Huang, K., Chen, X., Zhu, J., Meng, F., Song, X., Sun, Z., 2010, “Reversible wettability of nanostructured ZnO thin films by sol–gel method,” Appl. Surf. Sci., 256, pp. 4720-4723.

[314] Xu, B., Cai, Z., 2008, “Fabrication of a superhydrophobic ZnO nanorod array film on cotton fabrics via a wet chemical route and hydrophobic modification,” Appl. Surf. Sci., 254, pp. 5899-5904.

[315] Feng, X., Feng, L., Jin, M., Zhai, J., Jiang, L., Zhu, D., 2004, “Reversible Super-hydrophobicity to Super-hydrophilicity Transition of Aligned ZnO Nanorod Films,”J. Am. Chem. Soc., 126, pp. 62-63.

[316] Sun, T., Wang, G., Feng, L., Liu, B., Ma, Y., Jiang, L., Zhu, D., 2004, “Reversible Switching between Superhydrophilicity and Superhydrophobicity,”Angew. Chem. Int. Ed., 43, pp. 357 –360.

[317] Guo, Y., Jiang, D., Zhang, X., Zhang, Z., Wang, Q., 2010, “Room temperature synthesis of water-repellent polystyrene nanocomposite coating,”Appl. Surf. Sci., 256, pp. 7088-7090.

[318] Wang, J., Chen, X., Kang, Y., Yang, G., Yu, L., Zhang, P., 2010, “Preparation of superhydrophobic poly (methyl methacrylate)-silicon dioxide nanocomposite films,” Appl. Surf. Sci., 257, pp. 1473-1477.

[319] Meng, X, Q., Zhao, D, X., Zhang, J, Y., Shen, D, Z., Lu, Y, M., Dong, L., Xiao, Z, Y., Liu, Y, C., Fan, X, W., 2005, “Wettability conversion on ZnO nanowire arrays surface modified by oxygen plasma treatment and annealing,” Chem. Phys. Lett., 413, pp. 450-453.

[320] Schroedter, A., Weller, H., 2002, “Biofunctionalization of Silica-Coated CdTe and Gold Nanocrystals,” Nano Lett., 2, pp. 1363-1367.

[321] Zhang, L., Li, Y., Sun, J., Shen, J., 2008, “Layer-by-layer fabrication of broad-band superhydrophobic antireflection coatings in near-infrared region,” J. Colloid Interface Sci., 319, pp. 302-308.

[322] Xu, J., Li, M., Zhao, Y., Lu, Q., 2007, “Control over the hydrophobic behavior of polystyrene surface by annealing temperature based on capillary template wetting method,” Colloids Surf., A., 302, pp. 136-140.

[323] Guo, Y., Wang, Q., 2010, “Facile approach in fabricating superhydrophobic coatings from silica-based nanocomposite,” Appl. Surf. Sci., 257, pp. 33-36.

[324] Yuan, Z., Chen, H., Tang, J., Chen, X., Zhao, D., Wang, Z., 2007, “Facile method to fabricate stable superhydrophobic polystyrene surface by adding ethanol,” Surf. Coat. Technol., 201, pp. 7138-7142.

[325] Zhang, Z., Chen, H., Zhong, J., Saraf, G., Lu, Y., 2007, “Fast and Reversible Wettability Transitions on ZnO Nanostructures,” J. Electron. Mater., 36, pp. 895-899.

[326] Kumar, P, S., Raj, A, D., Mangalaraj, D., Nataraj, D., Ponpandian, N., Li, L., Chabrol. G., 2011, “Growth of hierarchical based ZnO micro/nanostructured films and their tunable wettability behaviour,” Appl. Surf. Sci., 257, pp. 6678-6686.

  

204  

[327] Karunakaran, R, G., Lu, C, H., Zhang, Z., Yang, S., 2011, “Highly Transparent Superhydrophobic Surfaces from the Coassembly of Nanoparticles (≤100 nm),” Langmuir., 27, pp. 4594-4602.

[328] Li, G., Chen, T., Yan, B., Ma, Y., Zhang, Z., Yu, T., Shen, Z., Chen, H., Wu, T., 2008, “Tunable wettability in surface-modified ZnO-based hierarchical nanostructures” Appl. Phys. Lett., 92, pp. 173104-173106.

[329] Chang, J, H., Hunter, I, W., 2011, “A Superhydrophobic to Superhydrophilic In Situ Wettability Switch of Microstructured Polypyrrole Surfaces,” Macromol. Rapid Commun., 32, 718-723.

[330] Badre, C., Pauporte, T., Turmine, M., Lincot, D., 2007, “A ZnO nanowire array film with stable highly water-repellent properties,” Nanotechnology., 18, pp. 365705-9.

[331] Li, G., Chen, T., Yan, B., Ma, Y., Zhang, Z., Yu, T., Shen, Z., Chen, H., Wu, T., 2008, “Tunable wettability in surface-modified ZnO-based hierarchical nanostructures” Appl. Phys. Lett., 92, pp. 173104-3.

[332] You, J, H., Lee, B, I., Lee, J., Kim, H., Byeon, S, H., 2011, “Superhydrophilic and antireflective La(OH)3/SiO2-nanorod/nanosphere films,” J. Colloid Interface Sci., 354, pp. 373-379.

[333] Yu, S., Zuo, X., Bao, R., Xu, X., Wang, J., Xu, J., 2009, “Effect of SiO2 nanoparticle addition on the characteristics of a new organic–inorganic hybrid membrane,” Polymer., 50, pp. 553-559.

[334] Xu, B., Cai, Z., Wang, W., Ge, F., 2010, “Preparation of superhydrophobic cotton fabrics based on SiO2 nanoparticles and ZnO nanorod arrays with subsequent hydrophobic modification,” Surf. Coat. Technol., 204, pp. 1556-1561.

[335] Hou, W., Wang, Q., 2007, “Wetting behavior of a SiO2–polystyrene nanocomposite surface,” J. Colloid Interface Sci., 316, pp. 206-209.

[336] Lau, K, K, S,, Bico, J., Teo, K, B, K., Chhowalla, M., Amaratunga, G, A. J., Milne, W, I., McKinley, G, H., Gleason, K, K., 2003, “Superhydrophobic Carbon Nanotube Forests,” Nano Lett., 3(12), pp. 1701–1705.

[337] Nishino, T., Meguro, M., Nakamae, K., Matsushita, M., Ueda, Y., 1999, “The Lowest Surface Free Energy Based on -CF3 Alignment,” Langmuir., 15, pp. 4321-4323.

[338] Saleema, N., Farzaneh, M., 2008, “Thermal effect on superhydrophobic performance of stearic acid modified ZnO nanotowers,” Appl. Surf. Sci., 254, pp. 2690–2695.

[339] Pisuchpen, T., Chamim-ngoen, N., Intasanta, N., Supaphol, P., Hoven, V, P., 2011, “Tuning Hydrophobicity and Water Adhesion by Electrospinning and Silanization,” Langmuir, 27, pp. 3654-3661.

[340] Wang, S., Li, Y., Fei, X., Sun, M., Zhang, C., Li, Y., Yang, Q., Hong, X., 2011, “Preparation of a durable superhydrophobic membrane by electrospinning poly (vinylidene fluoride) (PVDF) mixed with epoxy–siloxane modified SiO2 nanoparticles: A possible route to superhydrophobic surfaces with low water sliding angle and high water contact angle,” J. Colloid Interface Sci., 359, pp. 380-388.

  

205  

[341] Feng, L., Song, Y., Zhai, J., Liu, B., Xu, J., Jiang, L., Zhu, D., 2003, “Creation of a Superhydrophobic Surface from an Amphiphilic Polymer,” Angew. Chem. Int. Ed., 115, pp. 824-826.

[342] Cho, D., Zhou, H., Cho, Y., Audus, D., Joo, Y, L., 2010, “Structural properties and superhydrophobicity of electrospun polypropylene fibers from solution and melt,” Polymer., 51, pp. 6005-6012.

[343] Zheng, J., He, A., Li, J., Xu, J., Han, C, C., 2006, “Studies on the controlled morphology and wettability of polystyrene surfaces by electrospinning or electrospraying,” Polymer, 47, pp. 7095-7102.

[344] Stachewicz, U., Barber, A, H., 2011, “Enhanced Wetting Behavior at Electrospun Polyamide Nanofiber Surfaces,” Langmuir., 27, pp. 3024-3029.

[345] Acatay, K., Simsek, E., Yang, C, O., Menceloglu, Y, Z., 2004, “Tunable, Superhydrophobically Stable Polymeric Surfaces by Electrospinning,” Angew. Chem. Int. Ed., 43, pp. 5210 –5213.

[346] Stachewicz, U., Barber, A, H., 2011, “Enhanced Wetting Behavior at Electrospun Polyamide Nanofiber Surfaces,” Langmuir., 27, pp. 3024-3029.

[347] Kang, M., Jung, R., Kim, H, S., Jin, H, J., 2008, “Preparation of superhydrophobic polystyrene membranes by electrospinning,” Colloids Surf., A., 313–314, pp. 411–414.

[348] Conversion of an electrospun nanofibrous cellulose acetate mat from a super-hydrophilic to super-hydrophobic surface. Bin Ding, Chunrong Li, Yoshio Hotta, Jinho Kim, Oriha Kuwaki and Seimei Shiratori. Nanotechnology 17 (2006) 4332–4339.

[349] Jiang, L., Zhao, Y., Zhai, J., 2004, “A Lotus-Leaf-like Superhydrophobic Surface: A Porous Microsphere/Nanofiber Composite Film Prepared by Electrohydrodynamics,” Angew. Chem. Int. Ed., 43, pp. 4338-4341.

[350] Ding, B., Ogawa, T., Kim, J., Fujimoto, K., Shiratori, S., 2008, “Fabrication of a super-hydrophobic nanofibrous zinc oxide film surface by electrospinning,” Thin Solid Films., 516, pp. 2495-2501.

[351] Qizheng, C., Dong, X., Wang, J., Li, M., 2008, “Direct fabrication of cerium oxide hollow nanofibers by electrospinning,” J. Rare Earths., 26, pp. 664-669.

[352] Zhang, Y., Li, J., Li, Q., Zhu, L., Liu, X., Zhong, X., Meng, J., Cao, X., 2007, “Preparation of In2O3 ceramic nanofibers by electrospinning and their optical properties,” Scr. Mater., 56, pp. 409-412.

[353] Ponhan, W., Maensiri, S., 2009, “Fabrication and magnetic properties of electrospun copper ferrite (CuFe2O4) nanofibers,” Solid State Sci., 11, pp. 479-484.

[354] Nuansing, W., Ninmuang, S., Jarernboon, W., Maensiri, S., Seraphin, S., 2006, “Structural characterization and morphology of electrospun TiO2 nanofibers,” Mater. Sci. Eng., B., 131, pp. 147-155.

[355] Park, J, A., Moon, J., Lee, S, J., Lim, S, C., Zyung, T., 2009, “Fabrication and characterization of ZnO nanofibers by electrospinning,” Curr. Appl Phys., 9, pp. S210-S212.

  

206  

[356] Hong, Y., Li, D., Zheng, J., Zou, G., 2006, “In Situ Growth of ZnO Nanocrystals from Solid Electrospun Nanofiber Matrixes,” Langmuir., 22(17), pp. 7331–7334.

[357] Dong, H., Wang, D., Sun, G., Hinestroza, J, P., 2008, “Assembly of metal nanoparticles on electrospun Nylon 6 nanofibers by control of interfacial Hydrogen-Bonding interactions,” Chem. Mater., 20, pp. 6627-6632.

[358] Drew, C., Liu, X., Ziegler, D., Wang, X., Bruno, F, F., Whitten, J., Samuelson, L, A., Kumar, J., 2003, “Metal oxide-coated polymer nanofibers,” Nano Lett., 3, pp. 143-147.

[359] Yang, Y., Wang, P., 2006, “Preparation and characterizations of a new PS/TiO2 hybrid membranes by sol-gel process,” Polymer., 47, pp. 2683-2688.

[360] Dong, H., Hinestroza, J, P., 2009, “Metal nanoparticles on natural cellulose fibers: Electrostatic assembly and in situ synthesis,” ACS Appl. Mater. Interfaces., 1, pp. 797-803.

[361] Su, C., Shao, C., Liu, Y., 2010, “Synthesis of heteroarchitectures of PbS nanostructures well-erected on electrospun TiO2 nanofibers,” J. Colloid Interface Sci., 346, pp. 324-329.

[362] Hou, H., Reneker, D, H., 2004, “Carbon nanotubes on carbon nanofibers: Anovel structure based on electrospun polymer nanofibers,” Adv. Mater., 16, pp. 69-73.

[363] Dong, H., Fey, E., Gandelman, A., Jones W, E., 2006, “Synthesis and assembly of metal nanoparticles on electrospun poly(4-vinylpyridine) fibers and poly(4-vinylpyridine) composite fibers,” Chem. Mater., 18, pp. 2008-2011.

[364] Li, D., McCann, J, T., Gratt, M., Xia, Y., 2004, “Photocatalytic deposition of gold nanoparticles on electrospun nanofibers of titania,” Chem. Phys. Lett., 394, pp. 387-391.

[365] Dong, F., Li, Z., Huang, H., Yang, F., Zheng, W., Wang, C., 2007, “Fabrication of semiconductor nanostructures on the outer surface of polyacrylonitrile nanofibers by in-situ electrospinning,” Mater. Lett., 61, pp. 2556-2559.

[366] Li, Z., Huang, H., Shang, T., Yang, F., Zheng, W., Wang, C., Manohar, S, K., 2006, “Facile synthesis of single-crystal and controllable sized silver nanoparticles on the surfaces of polyacrylonitrile nanofibres,” Nanotechnology., 17, pp. 917-920.

[367] Tsioptsias, C., Sakellariou, K, G., Tsivintzelis, I., Papadopoulou, L., Panayioutou, C., 2010, “Preparation and characterization of cellulose acetate-Fe2O3 composite nanofibrous materials,” Carbohydr. Polym., 81, pp. 925-930.

[368] Wang, C., Yan, E., Li, G., Sun, Z., Wang, S., Tong, Y., Li, W., Xin, Y., Huang, Z., Yan, P., 2010, “Tunable photoluminescence of poly(phenylene vinylene) nanofibers by doping of semiconductor quantum dots and polymer,” Synth. Met., 160, pp. 1382-1386.

  

207  

[369] Son, D, I., You, C, H., Kim, W, T., Kim, T, W., 2009, “White light-emitting diodes fabricated utilizing hybrid polymer-colloidal ZnO quantum dots,” Nanotechnology., 20, pp. 365206-5.

[370] Ostermann, R., Li, D., Yin, Y., McCann, J, T., Xia, Y., 2006, “V2O5 Nanorods on TiO2 nanofibers: A new class of hierarchical nanostructures enabled by electrospinning and calcinations,” Nano Lett., 6, pp. 1297-1302.