103

REFERENCES

[1] K. Zielinska, A. Stankiewicz and I. Szczygiel, “Electroless deposition of Ni-P-nano-ZrO2

composite coatings in the presence of various types of surfactants”, Journal of Colloid

and Interface Science, vol. 377, pp. 362–367, 2012.

[2] Y. De Hazan, F. Knies, D. Burnat, T. Graule, Y. Yamada-Pittini, C. Aneziris and M.

Kraak, “Homogeneous functional Ni-P/ceramic nanocomposite coatings via stable

dispersions in electroless nickel electrolytes”, J. Colloid Interface Sci., vol. 365, pp.163-

171, 2012.

[3] H. Beygi, S.A. Sajjadi, S.M. Zebarjad and A. Babakhani, “Preparation of Al2O3/Cu core–

shell structural composites by electroless plating and determination of optimum bath

composition using Taguchi experimental design” in: 18th International Conference on

Composite materials, Jeju Island, Korea, 2011. (Cross references cited therein)

[4] W. Yating, S. Bin, L. Lei and H. Wenbin, “Artificial neural network modelling of plating

rate and phosphorus content in the coatings of electroless nickel plating”, Journal of

Materials Processing Technology, vol. 205, pp. 207–213, 2008.(Cross references cited

therein)

[5] R. Parkinson, “Properties and applications of electroless nickel”,

http://www.nipera.org/~/Media/Files/TechnicalLiterature/PropertiesAndApplicationsOfE

lectrolessNickel_10081_.pdf).

[6] D.W. Baudrand, “Electroless Nickel Plating”, ASM Handbook, Surface Engineering,

vol.5, pp. 290-310, 1994.

[7] D. Baudrand, “Electroless Nickel Applications Involving Heat Excursions”, Metal

Finishing, vol.97, pp. 36-41, 1999.

[8] P. Gillespie, “Electroless Nickel Coatings: Case study”, Surface Engineering casebook,

Edited by J.S. Burnell-Gray and P.K. Datta, Woodhead Publishing limited, pp. 49-72,

1996.

[9] M.D. Feidstein, “Composite coatings with Light-Emitting Properties”, Metal Finishing,

vol.97, pp. 87-90, 1999.

[10] N. Feidstein, T. Lancsek, D. Lindsay and L. Salerno, “Electroless composite Plating” ,

Metal Finishing, vol. 81, pp. 35-41, 1983.

104

[11] S.M.A. Shibli, B. Jabeera and R.I. Anupama, “Incorporation of nano zinc oxide for

improvement of electroless nickel plating”, Applied Surface Science, vol. 253, pp. 1644-

1648, 2006.

[12] S.M.A. Shibli, B. Jabeera and R.I. Anupama, “Development of ZnO incorporated

composite Ni–ZnO–P alloy coating”, Surface & Coatings Technology,vol. 200, pp. 3903-

3906, 2006.

[13] S.R. Allahkaram, R. Faezi Alivand and M.S. Bakhs, “Corrosion behavior of electroless

Ni-P /nano ZnO coatings”, Iranian Journal of Materials Science & Engineering , vol. 10,

no. 1, pp. 10-17, 2013.

[14] Q. Zhao, C. Liu, X. Su, S. Zhang, W. Song, S. Wang, G. Ning, J. Yeb, Y. Linb and W.

Gong, “Antibacterial characteristics of electroless plating Ni-P-TiO2 coatings”, Applied

Surface Science, vol. 274, pp. 101-104, 2013.

[15] A. Brenner and G.E. Riddell, “Nickel coating on steel by chemical reduction,” Journal of

Research of National Bureau of Standards, vol. 37, pp. 31–34, 1946.

[16] J. Kisel, PhD Thesis “Study of tin(II)/tin(IV)/anhydrous hydrochloric acid based

sensitizers for electrolessdeposition.”, Physics, National Library of Canada, 1989.

[17] R.C. Agarwala, V. Agarwala and R. Sharma, “Electroless Ni-P Based Nanocoating

Technology—A Review”, Synthesis and Reactivity in Inorganic, Metal-Organic, and

Nano-Metal Chemistry, vol. 36, no.6, pp. 493-515, 2006.

[18] J.P. Marton and M. Schlesinger, “The Nucleation, Growth, and Structure of Thin Ni‐P

Films”, J. Electrochem. Soc., vol.115, pp.16-21, 1968.

[19] M.A. Kumar, R.C. Agarwala and V. Agarwala, “Synthesis and characterization of

electroless Ni–P coated graphite particles”, Bull. Mater. Sci., vol. 31, pp. 819–824, 2008.

[20] R.C. Agarwala: Ph.D thesis “Structural Studies and Crystallization behaviour of

Electroless Ni-P Films”,IIT Roorkee (UOR), India 1987.

[21] J.N. Balaraju, T.S.N. Sankara Narayanan and S.K. Seshadri, “Electroless Ni–P composite

coatings”, J. Appl. Electrochem, vol. 33, pp. 807–816, 2009.

[22] K.H. Krishnan, S. John, K.N. Srinivasan, J. Praveen, M. Ganesan and P.M. Kavimani,

“An overall aspect of electroless Ni–P depositions - a review article”, Metall Mater Trans

A, vol. 37, pp. 1917–1926, 2006.

[23] W. Riedel. “Electroless nickel plating”, Great Britain: Finishing Publications Ltd., 1991.

105

[24] G. Gutzeit, “Catalytic Nickel Deposition from Aqueous Solution. I-IV”,Plating surface

finishing, vol. 46, pp. 1158-1164, 1959.

[25] G. Gutzeit, “Catalytic Nickel Deposition from Aqueous SolutionI-IV”, Plating (Paris),

vol. 47, pp. 63-70. 1960.

[26] G.O. Mallory, “Influence of the Electroless Plating Bath on the Corrosion Resistance of

the Deposits”, Plating vol.61, pp.1005, 1974.

[27] G.G. Gaurilow, “Chemical (electroless) nickel plating”,(Redhill: Porticullis) pp.68-72,

1979.

[28] G.O. Mallory, “Products finishing magazine”, reprinted courtesy Allied-Kellite Products

Division (originally presented at Electroless Nickel Conference, 6-7 Nov., Cincinati, OH,

1979.

[29] K. Stallman and H. Speakhardt, Metalloberfl. Angew. Electrochem. vol.35, pp.979, 1981.

[30] R.C. Agarwala and V. Agarwala, “Electroless alloy/composite coatings”,A

review,Sadhana.,vol. 28, pp. 475-493, 2003.

[31] J.D. Levy, “Thin nickel Films by hydrazine Autocatalytic Reduction”, Electrochem

Technol., vol.1, 38, 1963.

[32] J.W. Dini, “Electordeposition: The Materail science Coating and substrates”, William

Andrew publishing, Noyes, pp. 336, 1993.

[33] D.W. Boudrand, “Electroless plating”, ASM Handbook, Surface Engg.,vol.15, pp. 200-

203, 1994.

[34] G. Gutzeit and R. London, “A Large Scale ElectrolessNickel Custom Plating Shop”, 41st

Annual Proceedings A.Z.S., 1954, p. 256.

[35] E. Lanzoni, C. Martini, O. Ruggeri, R. Bertoncello and A. Glisenti, “European Fedration

of corrosion”, Publications (London: The Institute of Metals) No. 20, pp. 232-243.

[36] F.A. Lowenheim, “Electroplating-Fundamentals of Surface Finishing”, Mc Graw- Hill

Book Co., New York, 1978.

[37] A. Cziraki, B. Fogarassy, I. Bakonyi, K. Tompa and Z. Hegedns, “Investigation of

chemically Deposited and Electrodeposited Amorphous NiP Alloys”, J. De Physique, 41,

pp. C8-141-144, 1980.

[38] S.B Sharma, PhD Thesis. “Synthesis and tribological characterization of Ni-P based

electroless composite coatings”. IIT Roorkee, India, 2002.

106

[39] J. Sudagar, J. Lian and W. Sha, “Electroless nickel, alloy, composite and nano coatings–

A critical review”, J. of Alloys and Compounds, vol. 571, pp.183-204, 2013.

[40] P. Sahoo and S.K. Das, “Tribology of electroless nickel coatings–A review”, Materials

and Design, vol.32, pp.1760–1775, 2011.

[41] H. Ashassi-Sorkhabi and S.H. Rafizadeh “Effect of coating time and heat treatment on

structures and corrosion characteristics of electroless Ni–P alloy deposits”. Surf. Coat.

Technol, vol.176, pp. 318–26, 2003.

[42] K. Krishnaveni, T.S.N Sankara Narayanan and S.K. Seshadri, “Electroless Ni–B

coatings: preparation and evaluation of hardness and wear resistance”, Surf. Coat.

Technol, vol.190, pp.115–121, 2005.

[43] K.N. Srinivasan, R. Meenakshi, A. Santhi, P.R. Thangavelu and S. John, “Studies on

development of electroless Ni–B bath for corrosion resistance and wear resistance

applications”. Surf. Eng., 26 (3), pp.153–8, 2010.

[44] A.F. Kanta, V. Vitry and F. Delaunois., “Effect of thermochemical and heat treatments on

electroless nickel–boron”, Mater Lett., vol.63, pp. 2662–2665, 2009.

[45] C.E. Higgs, “The effect of heat treatment on the structure and hardness of an electrolessly

deposited nickel-phosphorus alloy”, Electrodep. Surf. Treatment, vol. 2, pp. 315–326,

1974.

[46] R.C. Agarwala, V. Agarwala and R. Sharma, “Metal-Organic, and Nano-Metal

Chemistry (SRINMC), Taylor & Francis Group”, LLC.vol.36, pp. 493–515, 2006.

[47] M.D. Feldstein, “Composite coatings with light emmiting Properties”, Met. Finish, vol.

97, pp. 87-90, 1999.

[48] A.J. Pedraza and M.J. Godbole, “Recrystallization and Mechanical Properties of

Electroless copper”, Scripta Metall, vol.24, pp.1185-1189, 1990.

[49] G. Dreezen, E. Deckx, S. Cheng, G. Luyckx, Carts-Europe 2000 conference in Brussels,

pp.16-20, 2000.

[50] K. Parker, “Recent Advances in Electroless Nickel Deposites”, 8th Interfinish Conference,

Basel, 1972.

[51] J.R. Henry, “Electroless (autocatalytic) plating”,Met. Finish.,vol.105, no.10, pp. 350–

360, 2007.

107

[52] P.B. Bedingfield, D.B. Lewis, P.K. Datta, J.S. Gray and P.B. Wells, “Studies of

Electroless Nickel –Boron Alloy Coatings”, Trans. Inst. Met. Finish, vol. 70, pp.19–23,

1992.

[53] A. Agrawal and K.K. Sahu, “An overview of the recovery of acid from spent acidic

solutions from steel and electroplating industries”, J. Hazard. Mater.,vol. 171, pp. 61–75,

2009. (Cross References cited therein)

[54] C.T. Dervos, J. Novakovic and P. Vassiliou, “Vacuum heat treatment of electroless Ni-B

coatings”, Mater. Lett.,vol.58, pp. 619–623, 2004.

[55] Z. Zhigang, M. Keisuke and N. Paolo, “Thermal resistance reduction in high power

superlu- minescent diodes by using active multi-mode interferometer”, Appl. Phys. Lett.,

vol.100, p. 108, 2012.

[56] J.M. Odekerken, “Method of Electrodepositing a Corrosion Resistant Nickel–Chromium

Coating and Product Thereof, US Patent,282,810,1966.

[57] W. Metzger and T. Florian, "Electroless Nickel Plating",Trans.Inst. Met.Finish., vol. 54,

pp.174, 1976.

[58] J.N. Balaraju and S.K. Seshadri, “Preparation and characterization of electroless Ni-P and

Ni-P-Si3N4 composite coatings”, Transactions of the Institute of Metal Finishing., vol.

77, no. 2, pp. 84–86, 1999.

[59] W. Chen, W. Gao and Y. He, “A novel electroless plating of Ni–P–TiO2 nano-composite

coatings”, Surf. Coat. Technol., vol.204, pp. 2493–2498, 2010.

[60] Z. Abdel Hamid and M.T. Abou Elkhair, “Development of electroless nickel–

phosphorous composite deposits for wear resistance of 6061 aluminum alloy”, Mater.

Lett.,vol.57, pp. 720–726, 2002.

[61] S.M. Moonir-Vaghefi, A. Saatchi and J. Hejazi, “Deposition and properties of electroless

nickel-phosphorus-molybdenum disulfide composites”, Met. Finish. vol. 95, no.11, pp.

46–52, 1997.

[62] M.D. Ger and B.J. Hwang, “Effect of surfactants on Co-Deposition of PTFE Particles

with elctroless Ni-P Coating”, Mater. Chem. Phys.vol.76, pp. 38–45, 2002.

[63] P.R. Ebdon, “The performance of electroless nickel-PTFE composites”, Plat. Surf.

Finish. Vol.75, no.9, pp. 65–68, 1988.

108

[64] A. Ramalho and J.C. Miranda, “Friction and wear of electroless NiP and NiP + PTFE

coatings”, Wear, vol. 259, pp. 828–834, 2005.

[65] I. Apachitei, F.D. Tichelaar, J. Duszczyk and L. Katgerman,“The effect of heat treatment

on the structure and abrasive wear resistance of autocatalytic Ni-P and Ni-P-SiC

coating”, Surf. Coat. Technol., vol.149, pp. 263–278, 2002.

[66] G. Jiaqiang, L. Lei, W. Yating, S. Bin and H. Wenbin, “Electroless Ni–P–SiC composite

coatings with superfine particles”, Surf. Coat. Technol.,vol. 200, pp. 5836–5842, 2006.

[67] Y.S. Huang, X.T. Zeng, I. Annergren and F.M. Liu, “Development of electroless NiP–

PTFE–SiC composite coating”, Surf. Coat. Technol., vol.167, pp. 207–211, 2003.

[68] D. Dong, X.H. Chen, W.T. Xiao, G.B. Yang and P.Y. Zhang, “Preparation and properties

of electroless Ni–P–SiO2 composite coatings”, Appl. Surf. Sci., vol. 255, pp. 7051–7055,

2009.

[69] T. Rabizadeh and S.R. Allahkaram, “Corrosionresistance enhancement of Ni–P

electroless coatings by in corporation of nano-SiO2 particles”, Mater. Des.,vol. 32,

pp.133-138, 2011.

[70] W.X. Chen, J.P. Tu, Z.D. Xu, R. Tenne, R. Rosenstveig, W.L. Chen and H.Y. Gan,

“Wear and Friction of Ni-P Electroless Composite Coating Including Inorganic

Fullerene-WS2 Nanoparticles”, Adv. Eng. Mater. vol. 4, pp. 686–690, 2002.

[71] O.A. Leon, M.H. Staia, H.E. Hintermann, “Wear mechanism of Ni–P–BN (h)

compositeautocatalytic coatings”, Surf. Coat. Technol. vol. 200, pp.1825–1829, 2005.

[72] W.X. Chen, J.P. Tu, Z.D. Xu, W.L. Chen, X.B. Zhang and D.H. Cheng, “Tribological

properties of Ni-P-multi-walled carbon nanotubes electroless composite coating”, Mater.

Lett.,vol. 57, pp. 1256–1260, 2003.

[73] Z. Yang, H. Xu, Y.L. Shi, M.K. Li, Y. Huang and H.L. Li, “The fabrication and corrosion

behavior of electroless Ni–P-carbon nanotube composite coatingsOriginal Research

Article”, Mater. Res. Bull. vol. 40, pp. 1001-1009, 2005.

[74] L.M. Ang, T.S.A. Hor, G.Q. Xu, C. Tung, S. Zhao and J.L.S. Wang, “Electroless Plating

of Metals onto Carbon Nanotubes Activated by a Single-Step Activation Method”, Chem.

Mater. vol. 11, pp. 2115-2118, 1999.

109

[75] W. Li, H. Jin, Y. Hao, T. Chen, J. Dai, Q. Wang, “The Microstructure of Ni Layer on

Single-Walled Carbon Nanotubes Prepared by an Electroless Coating Process”, J.

Nanomater., vol. 2011, pp1-5 (ID 348958), 2011.

[76] R. Seidel, M. Liebau, G.S. Duesberg, F. Kreupl, E. Uuger, A.P. Graham, W. Hoenlein

and W. Pompe, “In-Situ Contacted Single-Walled Carbon Nanotubes and Contact

Improvement by Electroless Deposition”, Nano Lett. Vol. 3, pp. 965-968, 2003.

[77] N. Feldstein, G.O. Mallory and J.B. Hajdu,“Electroless Plating: Fundamentals and

Applications”, American Electroplaters and Surface Finishers Society, Orlando,

Florida,(Eds.) pp. 269, 1990.

[78] K.G. Satyanarayana, R.C. Agarwala, V. Agarwala, and S. B. Sharma, Patent for “Ni-P-

Al2O3-ZrO2 EL Composite Nanocoating”, Filed through RRL-Thiruvananthapuram,

CSIR Lab: India, Gazette No. 100/Del/2001.

[79] S.B. Sharma, R.C Agarwala, V. Agarwala, K.G Satyanarayana, “Development of

electroless composite coatings by using in-situ co-precipitation followed by co-deposition

process”,Metallurgical andMaterials Transactions, vol. 36B, pp. 23-31, 2005.

[80] R.C. Agarwala, “Electroless Ni–P–ferrite composite coatings for microwave

applications”, PRAMANA- J Phys., vol. 65 (5), 1, 2005.

[81] J.K. Dennis, S.T. Sheikh, E.C. Silverstone, Trans. Inst. Met. Finish, vol.59, pp. 118–122,

1981.

[82] R.N. Duncan,“Hardness and wear resistance of electroless nickel- teflon composite

coatings”,Met. Finish. vol. 87, no.9, pp. 33–34, 1989.

[83] J.T. Winowlin Jappes, B. Ramamoorthy, P. Kesavan Nair,“Novel approaches on the

study of wear performance of electroless Ni–P/diamond composite deposites”, J. Mater.

Process. Technol., vol. 209, pp.1004–1010, 2009.

[84] J.N. Balaraju, T.S.N. Sankara Narayanan and S.K. Seshadri, “Evaluation of the

corrosionresistance of electroless Ni–P and Ni–P composite coating by electrochemical

impedance spectroscopy”, J. Solid State Electrochem.,vol.5, pp. 334–338, 2001.

[85] H.M. Jin, S.H. Jiang and L.N. Zhang, “Microstructure and corrosion behavior of

electroless deposited Ni–P/CeO2 coating”, Chin. Chem. Lett.vol.19, pp. 1367–1370,

2008.

110

[86] C.Y. Wang, Y. Zhou, Y.R. Zhu, Y. Hu and Z.Y. Chen, “Synthesis and characterization of

Ni-P–TiO2 ultrafine composite particles”, Mater. Sci. Eng., B, vol.77, pp.135, 2000.

[87] A.A. Zuleta, O.A. Galvis, J.G. Castano, F. Echeverria, F.J. Bolivar, M.P. Hierro and F.J.

Perez-Trujillo,“Preparation and characterization of electroless Ni–P–Fe3O4 composite

coatings and evaluation of its high temperature oxidation behaviour”, Surf. Coat.

Technol., vol. 203, pp. 3569–3578, 2009.

[88] P. Tao, M. Mehua, X. Feibo and X. Xinquan,“XPS and AES investigation of nanometer

composite coatings of Ni-P-ZnX on steel surface (ZnX = ZnSnO3, Zn3(PO4)2, ZnSiO3)”,

Appl. Surf. Sci., vol.181, pp.191, 2001.

[89] M. Petrova, Z. Noncheva and E. Dobreva, “Electorless deposition of diamond powder

dispersed nickel-phosphorus coatings on steel substrate”, Trans. Inst. Met. Finish. vol.89,

pp. 89–94, 2011.

[90] B. Xu and W. Zhang, “Properties of nano-diamond composite coating prepared by

electro-brush plating”, Trans. Metal Heat Treatment,vol. 20, pp. 36-41, 1999.

[91] V.V.N. Reddy, B. Ramamoorthy, P.K. Nair, “A study on the wear resistance of

electroless Ni–P/Diamond composite coatings”, Wear, vol. 239, pp.111–116, 2000.

[92] X. Yu, H. Wang, Z. Yang, P. Yin and X. Xin, “XPS and AES investigation of two

electroless composite coatings”, Appl. Surf. Sci., vol.158, pp. 335-339, 2000.

[93] Y.W. Xiang, J.Y. Zhang and C.H. Jin, Plat. Surf. Finish. vol. 88 no.2, pp. 64–67, 2001.

[94] B. Bozzini, V.E. Sidorov, A.S. Dovgopol and J.P. Birukov, “Magnetic susceptibility of

electroless Ni84P16 and Ni84P16-B4C”, Int. J. Inorg. Mater.,vol. 2, pp. 437-442, 2000.

[95] T.K. Tsai, C.C. Chuang, C.G. Chao and W.L. Liu, Diam., “Growth and field emission of

carbon nanofibers on electroless Ni–P alloy catalyst”, Relat. Mater. vol. 12, pp. 1453–

1459, 2003.

[96] M. Moritz and M. Geszke-Moritz, “A Review-The newest achievements in synthesis,

immobilization and practicalapplications of antibacterial nanoparticles”, Chemical

Engineering Journal, vol. 228, pp. 596–613, 2013.

[97] P.C. Kao, S.Y. Chu, B.J. Li, J.W. Chang, H.H. Huang, Y.C. Fang and R.C. Chang, “Low

temperature solution-synthesis and photoluminescence properties of ZnO nanowires”, J.

Alloys Compd., vol. 467, pp.342-346, 2009.(Cross references cited therein)

111

[98] G. Guo, C. Shi, D. Tao, W. Qian, D. Han, “Synthesis of well-dispersed ZnO

nanomaterials by directly calcining zinc stearate”, J. Alloys Compds. 472, pp. 343-346,

2009.(Cross references cited therein)

[99] C.J. Hewitt, S.T. Bellara, A. Andreani, G. Nebe-von-Caron and C.M. Mcfarlane, “An

evaluation of the antibacterial action of ceramic powder slurries using multiparameter

flow cytometry”, Biotechnol. Lett. Vol. 23, pp. 667–675, 2001.

[100] G. Fu, P.S. Vary and C.T. Lin, “Anatase TiO2 nanocomposites for antimicrobial coating”,

J. Phys. Chem. vol. 109B, pp. 8889–8898, 2005.

[101] S. Makhluf, R. Dror, Y. Nitzan, Y. Abramovich, R. Jelinek and A. Gedanken,

„Microwave-assisted synthesis of nanocrystalline MgO and its use as Bacteriocide”, Adv.

Funct. Mater. , vol. 15, pp. 1708–1715, 2005.

[102] P.K. Stoimenov, R.L. Klinger, G.L. Marchin and K.J. Klabunde, “Metal oxide

nanoparticles as bactericidal agents”, Langmuir vol. 18, pp. 6679–6686, 2002.

[103] L. Vayssieres,“Growth of arrayed nanoroads and nanowires of ZnO from aqueous

solutions”, Adv. Mater., vol. 15, pp. 464-466, 2003. (Back references cited therein).

[104] D.C. Look, “Recent advances in ZnO materials and devices”, Mat.Sci.Eng.,vol. 80B, p.

383, 2001.

[105] D.W. Zeng, C.S. Xie and B.L. Zhu, “Synthesis and characterstics of Sb-doped ZnO”,Mat.

Sci. Eng.,vol. 10B, pp.468-72, 2003.

[106] B.L. Zhu, D.W. Zeng and W.L. Song,“Investigation of gas sensitivity of Sb-doped ZnO

nanoparticles”, Mat.Chem.Phys., vol. 89, pp.148-153, 2005.

[107] M.S. Mohajerani, A. Lak and A. Simchi, “Effect of morphology on the solar

photocatalytic behavior of ZnO nanostructures”,J. Alloys Compd., vol. 485, pp. 616-

620, 2009.

[108] P. Huang, X. Zhang, J. Wei and B. Feng, “ZnO hierarchical structures synthesized via

hydrothermal method and their photoluminescence properties”, J. Alloys Compd., vol.

489, pp.614-619, 2010.

[109] R.M. Trommer, A.K. Alves and C.P. Bergmann, “Synthesis, characterization and

photocatalytic property of flame sprayed zinc oxide nanoparticles”, J. Alloys Compd.,

vol. 491, pp. 296-300, 2010.

112

[110] M. Mazloumi, S. Taghavi, H. Arami, S. Zanganesh, A. Kajbafvala, M.R. Shayegh, S.K.

Sadrnezhaad, “Self-assembly of ZnO nanoparticles and subsequent formation of hollow

microspheres”, J. Alloys Compd., vol. 468, pp.303-307, 2009.

[111] M. Samy El-Shall, D. Graiver, U. Pernisz, M.I. Baraton, “Synthesis and characterization

of nanoscale zinc oxide particles: I. laser vaporization / condensation technique”,

Nanostructured Materials, vol. 6, pp. 297-300, 1995.

[112] C.H. Lu, Y.C. Lai and R.B. Kale, “Influence of alkaline sources on the structural and

morphological properties of hydrothermally derived Zinc oxide powders”, J. Alloys

Compd., vol. 477, pp. 523-526, 2009.

[113] L.E. Greene, M. Law, J. Goldberger, F. Kim, J.C. Johnson, Y. Zhang, R.J. Saykally, P.

Yang, “Low-Temperature Wafer-Scale Production of ZnO Nanowire Arrays”

Angew.,Chem., Int. Ed. Engl., vol. 42, 3031, 2003.

[114] D. Li, Y.H. Leung, A.B. Djurišić, Z.T. Liu, M.H. Xie, S.L. Shi, S.J. Xu and W.K. Chan,

“ Different origins of visible luminescence in ZnO nanostructures fabricated by the

chemical and evaporation methods”, J. Appl. Phys. Lett., vol. 85, pp.1601, 2004.

[115] J. Zhang, L. Sun, J. Yin, H. Su, C.S. Liao and C. Yan, “Control of ZnO morphology via a

simple solution route”, Chem. Mater., vol. 14, pp. 4172–4177, 2002.

[116] M.K. Hossain, S.C. Ghosh, Y. Bootongkang, C. Thanachayanont and J. Dutta, “Growth

of zinc oxide nanowires and nanobelts for gas sensing”, J. Metastable Nanocryst.

Mater.,vol. 23, pp. 27-30, 2005.

[117] K.H. Tam, A.B. Djurišić , C.M.N. Chan , Y.Y. Xi , C.W. Tse , Y.H. Leung , W.K. Chan ,

F.C.C. Leung and D.W.T., “Antibacterial activity of ZnO nanorods prepared by a

hydrothermal method”. Thin Solid Films, vol. 516, pp. 6167–6174, 2008.

[118] O. Yamamoto, “Influence of particle size on the antibacterial activity of zinc oxide”,

International Journal of Inorganic Materials, vol. 3, pp. 643–646, 2001.

[119] L. Zhang, Y. Jiang, Y. Ding, M. Povey and D. York, “Investigation into the antibacterial

behaviour of suspensions of ZnO nanoparticles (ZnO nanofluids)”, Journal of

Nanoparticle Research, vol. 9, pp. 479-489, 2007.

[120] H.H. Sandstead, “Understanding zinc-recent observations and interpretations”, Journal of

Laboratory and Clinical Medicine, vol. 124, pp. 322–327, 1994.

113

[121] N. Jones, B. Ray, K.T. Ranjit and A.C. Manna, “Antibacterial activity of ZnO

nanoparticle suspensions on a broad spectrum of microorganisms”, FEMS Microbiology

Letters, vol. 279, 71–76, 2008.

[122] P.M. Sivakumar, S. Balaji, V. Prabhawathi, R. Neelakandan, P.T. Manoharan and M.

Doble, “Effective antibacterial adhesive coating on cotton fabric using ZnO nanorods and

chalcone”, Carbohydrate Polymers, vol. 79, pp. 717-723, 2010.

[123] A. Nel, T. Xia, L. Madler and N. Li., “Toxic potential of materials at the nanolevel”.

Science, vol. 311, pp. 622-6277, 2006.

[124] T.D. Zaveri, N.V. Dolgova, B.H. Chu, J. Lee, J. Wong, T.P. Lele, F. Ren and B.G.

Keselowsky, “Contributions of surface topography and cytotoxicity to the macrophage

response to zinc oxide nanorods Biomaterials”, vol. 31, pp. 2999-3007, 2010.

[125] C. Karunakaran, V. Rajeswari and P. Gomathisankar, “Antibacterial and photocatalytic

activities of sonochemically prepared ZnO and Ag–ZnO”, Journal of Alloys and

Compounds, vol. 508, pp. 587–59, 2010.

[126] L. Spanhel and M.A. Anderson, “Semiconductor clusters in the sol–gel process:

quantized aggregation, gelation, and crystal growth in concentrated ZnO colloids”, J.Am.

Chem. Soc., vol. 113, pp. 2826–2833, 1991.

[127] R.M. Nyffenegger, B. Craft, M. Shaaban, S. Gorer, G. Erley, R. M. Penner, “A hybrid

electrochemical/chemical synthesis of zinc oxide nanoparticles and optically intrinsic thin

films”, Chem. Mater,vol. 10, pp.1120-1129, 1998.

[128] C.J. Brinker and G.W. Scherer, “The Physics and Chemistry of Sol-Gel Processing, Sol-

Gel Science”, Academic Press, San Deigo, 1990.

[129] L. Shen, N. Bao, K. Yanagisawa, K. Domen, A. Gupta and C.A.Grimes, “Direct

synthesis of ZnO nanoparticles by solution-free mechanochemical reaction”,

Nanotechnology, vol. 17 pp. 5117–5123, 2006.

[130] M.A. Dakka, A. Qurashi, P. Hari, M.W.Alam, “Direct synthesis of ZnO nanoparticles by

a solution-free mechanochemical reaction”, Materials Science in Semiconductor

Processing, vol. 13, pp. 115–118, 2010.

[131] D. Bahadur, S. Rajakumar and A. Kumar, “Influence of fuel ratios on auto combustion

synthesis of barium ferrite nano particles”, J. Chem. Sci., vol. 118, no.1, pp. 15-21, 2006.

114

[132] G. Binnig, C.F. Quate and C. Gerber, “Atomic Force Microscope”, vol., 56, pp. 930-933,

1986.

[133] P.K. Roy, “Synthesis of Nano Zno Powder and Study of Its Varistor Behavior at

Different Temperatures”, Journal of Materials Science Research, vol. 1, no. 4, pp. 28-34,

2012.

[134] J. Novakovic, P. Vassiliou, K.L. Samara, T. Argyropoulos, “Electroless NiP-TiO2

composite coatings: Their production and properties”, Th. Surf. Coat. Technol., vol. 201,

pp. 895-901, 2006.

[135] S. R. Allahkaram, R. Faezi Alivand and M. S. Bakhsh, “Corrosion behavior of

electroless Ni-P/Nano ZnOcoatings”, Iranian Journal of Materials Science &

Engineering, vol. 10, pp. 11-17, 2013,.

[136] J.N. Balaraju, C. Anandan and K.S. Rajam, “Morphological study of ternary Ni–Cu–P

alloys by atomic force microscopy”,Applied Surface Science, vol. 250 pp. 88–97, 2005.

[137] A. Babanejhad, M. Hashemi, Y. Rahmatallahpur and S.A. Nozad, “Effect of lactic acid

on nucleation morphology and surface roughness of electroless Ni–P deposition in

nanoscale”, Bull. Mater. Sci., vol. 35, pp. 561-566, 2012.