• Combine the science of simulation and the insight of process monitoring. • The most effective way to eliminate unwanted porosity. • Astounding precision - more accurate porosity simulation than the competition. • Define and automatically populate optimal shot parameters • Generate and track ideal shot profiles • Based on your unique machine specs not just simple clamp tonnage estimates • Castle from PiQ 2 is now fully integrated into Visi-Trak’s True-Trak 20/20™ Shot Monitor and Sure-Trak2™ Shot Control System EASY TO LEARN AND USE: • Fully Integrated - Populate parameters and profiles automatically • Easy to Learn Fully trained in a single day • Fast Set-Up - Prepare & launch simulations in just minutes • Easy On The Budget At last, affordable simulation Visi-Trak Worldwide, LLC, 8400 Sweet Valley Drive, Suite 406, Valley View, OH 44125 call +1.216.524.2363 or visit www.Visi-Trak.com ADVANCING PROCESS, INCREASING PROFITS DEFINE IT, THEN DO IT START TO FINISH PRECISION Simulation + Process Reduce Porosity With

Reduce Porosity With Simulation + Process · Our advanced PQ2 diagram will help you improve your process in minutes. • CASTLE BODY - Get more from die casting simulation. Discover

Download PDF Report

Upload
others
View
9
Download
0

Embed Size (px)

Citation preview

Page 1: Reduce Porosity With Simulation + Process · Our advanced PQ2 diagram will help you improve your process in minutes. • CASTLE BODY - Get more from die casting simulation. Discover

• Combine the science of simulation and the insight of process monitoring.

• The most effective way to eliminate unwanted porosity.

• Astounding precision - more accurate porosity simulation than the competition.

• Define and automatically populate optimal shot parameters

• Generate and track ideal shot profiles

• Based on your unique machine specs not just simple clamp tonnage estimates

• Castle from PiQ2 is now fully integrated into Visi-Trak’s True-Trak 20/20™ Shot Monitor and Sure-Trak2™ Shot Control System

EASY TO LEARN AND USE:

• Fully Integrated - Populate parameters and profiles automatically

• Easy to Learn Fully trained in a single day

• Fast Set-Up - Prepare & launch simulations in just minutes

• Easy On The Budget At last, affordable simulation

Visi-Trak Worldwide, LLC, 8400 Sweet Valley Drive, Suite 406, Valley View, OH 44125

call +1.216.524.2363 or visit www.Visi-Trak.com

ADVANCING PROCESS, INCREASING PROFITS

DEFINE IT, THEN DO ITSTART TO FINISH PRECISION

Simulation + ProcessReduce Porosity With

Page 2: Reduce Porosity With Simulation + Process · Our advanced PQ2 diagram will help you improve your process in minutes. • CASTLE BODY - Get more from die casting simulation. Discover

Castle from PiQ2 is now fully integrated into Visi-Trak’s True-Trak 20/20™ Shot Monitor and Sure-Trak2™ Shot Control System

• CASTLE MIND - Advanced optimization insight in practical foundry language. Make changes at the design stage while changes are cheap! Our advanced PQ2 diagram will help you improve your process in minutes.

• CASTLE BODY - Get more from die casting simulation. Discover why a dual phase (metal and air) simulation is much more accurate than the traditional single phase ones.

• CASTLE RUN - Diagnose your runner design in just 5 minutes. Discover optimal runner geometry to reduce air entrapment and optimize gate sections.

PRACTICAL INTELLIGENCEFOR DIE CASTING

Visi-Trak Worldwide, LLC, 8400 Sweet Valley Drive, Suite 406, Valley View, OH 44125

call +1.216.524.2363 or visit www.Visi-Trak.com

FAST FLOW CHANNEL SIMULATION

YOU’LL NEVER WORK ALONETrouble figuring out what your simulation is telling you to do?

Castle expresses all suggestions and optimal machine parameters in practical foundry language.

AIR AND METAL FLOW SIMULATION

Time: 0.120000PIQ2

Simulation SoftwareFully Integrated PiQ2