Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
TECHNICAL GUIDE: ADC1.1
Applications
Pedestrian areas
Shopping centres
Commercial areas
Podiums
Shared areas
Swimming pools
Product Attributes
Choice of 4 clear opening widths 100,
150, 200 and 300mm
Up to Class D to AS 3996
Stainless, ductile iron, composite, and
galvanized grating
Environmentally friendly with 100%
recycled PP channel
Approvals/Standards
Slip rated to AS4586
Load rated to AS3996
RECYFIX® Pro
Channel and Grates Systems
AD
C1.
1 H
Au
RA
to
n R
EC
YF
IX P
Ro
| D
RA
INA
GE
CH
AN
NE
L |
PG
2
RECYFIX® PRO is a corrosion-free drainage system for private and
public areas.
Applications
■ Pedestrian areas
■ Shopping centres
■ Commercial areas
■ Parking lots and garages
■ Shared areas
Requirements
■ Modern and unique in its design.
■ Extremely stable to guarantuee long-term and permanent security.
■ Be resistant to environmental influences (frost, heat and moisture).
■ Be designed in accordance with AS 3996.
Solutions
■ Channel made of recycled PP
■ Loading capacity up to D 210
■ Stainless steel grating 304 x 316
AD
C1.1 H
Au
RA
to
n R
EC
YF
IX P
Ro
| DR
AIN
AG
E C
HA
NN
EL | P
G 3
Load Classes Australian Standard AS 3996 Category B 80
Load class 125 knCategory D 210 Load class 210 kn
Low weight ensures easy handling on site
■ Much lighter than comparison channels on market
■ Easy transport and installation
= cost savings
Award-winning design ■ FIBRETEC Slotted gratings
honoured with Focus Open Design Award
■ Nomination for German design prize
= high quality workHigh-grade material
■ RECYFIX – stable and unbreakable ■ Elastic and especially
robust material ■ Withstands in daily
use high loadings and temperature differences
= security
High resistance ■ High resistance agains
frost, de-icing salt and UV rays
■ Withstands high temperature differences
= durability
Angle housing ■ PE-angle housing ■ Ridges to stop any lateral ■ movement inlaying gratings
= security
Pre-assembled ready for installation
■ Channel and grating = one part ■ Easy handling on construction site ■ Cost-efficient transport
= better gross margin
AD
C1.
1 H
Au
RA
to
n R
EC
YF
IX P
Ro
| D
RA
INA
GE
CH
AN
NE
L |
PG
4
RECYFIX® PRo 100
FIg. 1 Pro 100 with longitudinal “Wedge Wire Heelguard” grating, stainless steel
tABLE 1 Recyfix® Pro 100
Length mm
Width mm
Height mm
Drainage cross-sect
cm2
Intake cross-sect
cm2/m
Weight kg
Itemno. 304
s/s
Itemno. 316
s/s
Class A 15
Type 75 with longitudinal “Wedge Wire Heelguard” grating, stainless steel 1000 160 75 35 444 6.2 49920 49924
Type 01 with longitudinal “Wedge Wire Heelguard” grating, stainless steel 1000 160 150 92 444 7.2 49922 49926
Type 010 with longitudinal “Wedge Wire Heelguard” grating, stainless steel 1000 160 200 142 444 7.8 49923 49927
Class B 125
Type 75 with longitudinal grating "Wedge Wire Heelsafe", stainless steel 1000 160 75 35 598 6,20 47304 47320
Type 01 with longitudinal grating "Wedge Wire Heelsafe", stainless steel 1000 160 150 92 598 7,20 47306 47222
Type 010 with longitudinal grating "Wedge Wire Heelsafe", stainless steel 1000 160 200 142 598 7,80 47307 47323
Type 75 with mesh grating MW 30/10 mm, locked 1000 160 75 35 1099 5,00 47001 –
Type 010 with mesh grating MW 30/10 mm, locked 1000 160 200 142 1099 6,60 47071 –
Class C 250
Type 75 with FIBRETEC design slotted grating in the colour Black, SW 9 mm, locked
1000 160 75 35 372 3,40 47062 –
Type 01 with FIBRETEC design slotted grating in the colour Black, SW 9 mm, locked
1000 160 150 92 372 4,60 47055 –
Type 010 with FIBRETEC design slotted grating in the colour Black, SW 9 mm, locked
1000 160 200 142 372 4,90 47060 –
Class D 400
Type 75 with ductile iron design grating METROPOLIS, black, KTL-coated, locked
1000 160 75 35 165 11,40 47008 –
Type 01 with ductile iron design grating METROPOLIS, black, KTL-coated, locked
1000 160 150 92 165 12,50 47002 –
Type 010 with ductile iron design grating METROPOLIS, black, KTL-coated, locked
1000 160 200 142 165 12,90 47057 –
Type 75 with slotted ductile iron grates 1000 160 70 35 372 8.86 50110 –
Type 01 with slotted ductile iron grates 1000 160 150 92 372 9.96 50111 –
Type 010 with slotted ductile iron grates 1000 160 200 142 372 9.96 50112 –
AD
C1.1 H
Au
RA
to
n R
EC
YF
IX P
Ro
| DR
AIN
AG
E C
HA
NN
EL | P
G 5
RECYFIX® PRo 100 Accessories
FIg. 2 End cap made of PP with outlet DN 100 for type 01 FIg. 3 End cap made
of PP, type 020
FIg. 4 Mud bucket vertical DN 100, black
FIg. 5 Step Fall Adapter for step slope, from type 01 to type 010, from type 010 to type 020
tABLE 2 Recyfix Pro 100 Accessories
Length mm
Width mm
Height mm
Weight kg
Itemno.
Trash box with mud bucket and FIBRETEC slotted grating, SW 9, black 500 160 505 5.9 47054
Trash box with mud bucket and 304 stainless steel Heelguardgrating 500 160 505 8.1 47314
Trash box with mud bucket and 316 stainless steel Heelguardgrating 500 160 505 8.1 47324
Mud bucket vertical DN 100, black - - - 0.1 40293
End cap closed for type 01 5 160 124 0.1 48681
End cap made of PP with outlet DN 100 for type 01 29 160 201 0.1 48691
End cap closed for type 010 5 160 176 0.1 47082
End cap made of PP with outlet DN 100 for type 010 34 160 201 0.1 47093
AD
C1.
1 H
Au
RA
to
n R
EC
YF
IX P
Ro
| D
RA
INA
GE
CH
AN
NE
L |
PG
6
RECYFIX® PRo 150
FIg. 6 Pro 150 with longitudinal grating “Wedge Wire Heelguard”, stainless steel
tABLE 3 Recyfix® Pro 150
Length mm
Width mm
Height mm
Drainage cross-sect
cm2
Intake cross-sect
cm2/m
Weight kg
Itemno. 304
s/s
Itemno. 316
s/s
Class A 15
Type 115 with longitudinal grating "Wedge Wire Heelguard", stainless steel 1000 212 115 116 792 9.9 49930 49932
Type 01 with longitudinal grating "Wedge Wire Heelguard", stainless steel 1000 212 210 230 792 11.2 49931 49933
Class B 125
Type 115 with longitudinal grating "Wedge Wire Heelsafe", stainless steel 1000 212 115 116 792 9,90 47309 47325
Type 01 with longitudinal grating "Wedge Wire Heelsafe", stainless steel 1000 212 210 230 792 11,20 47310 47326
Type 115 with FIBRETEC design slotted grating, SW 9 mm, black, locked 1000 212 115 116 500 6,10 47133 –
Type 01 with FIBRETEC design slotted grating, SW 9 mm, black, locked 1000 212 210 230 500 7,40 47135 –
Type 01 with mesh grating, MW 30/10 mm, locked 1000 212 210 230 1490 8,60 47140 –
Type 115 with mesh grating MW 30/10 mm, locked 1000 212 115 116 1490 7,40 47132 –
Class D 400
Type 115 with slotted ductile iron grates 1000 212 115 116 500 159.9 50124 –
Type 01 with slotted ductile iron grates 1000 212 210 230 500 17.1 50125 –
AD
C1.1 H
Au
RA
to
n R
EC
YF
IX P
Ro
| DR
AIN
AG
E C
HA
NN
EL | P
G 7
tABLE 4 Recyfix® Pro 150 Accessories
Length mm
Width mm
Height mm
Weight kg
Itemno.
Trash box with galvanised mud bucket and stainless steel Heelguardgrating 500 212 518 18.7 47315
Mud bucket vertical DN 100, black - - - 47327
End cap closed, type 115 - 208 100 - 47197
End cap combined, PE-PP with outlet DN 70/100 for type 01 24 210 218 0.1 40591
Mud bucket DN 150 100 100 85 - 40293
Mud bucket vertical DN 100, black - - 180 0.6 2191
RECYFIX® PRo 150 Accessories
FIg. 7 End cap closed, type 115 FIg. 8 End cap combined, PE-PP with outlet DN 70/100 for type 01
FIg. 9 Mud bucket DN 150 FIg. 10 Mud bucket vertical DN 100, black
FIg. 11 Trash box with galvanised mud buck-et and stainless steel Heelguardgrating
AD
C1.
1 H
Au
RA
to
n R
EC
YF
IX P
Ro
| D
RA
INA
GE
CH
AN
NE
L |
PG
8
FIg. 12 Recyfix Pro 200 with G-TEC grating, KTL-coated, locked
RECYFIX® PRo 200
tABLE 5 Recyfix® Pro 200
Length mm
Width mm
Height mm
Drainage cross-sect
cm2
Intake cross-sect
cm2/m
Weight kg
Itemno. 304
s/s
Itemno. 316
s/s
Class A 15
Type 115 with longitudinal grating “Wedge Wire Heelguard”, stainless steel 1000 262 115 150 955 13.8 49934 49936
Type 01 with longitudinal grating “Wedge Wire Heelguard”, stainless steel 1000 262 201 294 955 14.8 49935 49937
Class B 125
Type 115 with longitudinal grating "Wedge Wire Heelsafe", stainless steel 1000 262 115 150 955 13,80 47311 47328
Type 010 with longitudinal grating "Wedge Wire Heelsafe", stainless steel 1000 262 200 294 955 14,80 47312 47329
Typ 010 with mesh grating, MW 30/10 mm, locked 1000 262 200 294 1912 11,00 47248 –
Typ 115 with mesh grating, MW 30/10 mm, locked 1000 262 115 150 1912 10,10 47235 –
Type 010 with FIBRETEC design slotted grating, SW 9 mm, black, locked 1000 262 200 294 656 8,30 47246 –
Type 115 with FIBRETEC design slotted grating, SW 9 mm, black, locked 1000 262 115 150 656 7,00 47233 –
Class D 400
Type 115 with G-TEC Ductile iron grating, SW 9 mm, KTL- coated, locked 1000 262 115 150 595 19,30 47232 –
Type 010 with G-TEC Ductile iron grating, SW 9 mm, KTL-coated, locked 1000 262 200 294 595 20,60 47245 –
AD
C1.1 H
Au
RA
to
n R
EC
YF
IX P
Ro
| DR
AIN
AG
E C
HA
NN
EL | P
G 9
tABLE 6 Recyfix® Pro 200 Accessories
Length mm
Width mm
Height mm
Weight kg
itemno.
Trash box with galvanised mud bucket and 304 stainless steel Heelguardgrating 500 262 752 35.4 47316
Trash box with galvanised mud bucket and 316 stainless steel Heelguardgrating 500 262 752 35.4 47330
End cap combined, PP with outlet DN 70/100 for type 010 28 258 217 0,7 41387
End cap closed, type 115 - 260 115 0,1 47297
Mud bucket DN 150 - - 180 0.6 2191
RECYFIX® PRo 200 Accessories
FIg. 13 Trash box with galvanised mud bucket and stainless steel Heelguard-grating
FIg. 14 End cap CLOSED, type 115 FIg. 15 End cap combined made of PP closed / with outlet DN 100, Type 010
AD
C1.
1 H
Au
RA
to
n R
EC
YF
IX P
Ro
| D
RA
INA
GE
CH
AN
NE
L |
PG
10
FIg. 16 Pro 300 with longitudinal grating “Wedge Wire Heelguard”, stainless steel
RECYFIX® PRo 300
tABLE 7 Recyfix® Pro 300
Length mm
Width mm
Height mm
Drainage cross-sect
cm2
Intake cross-sect
cm2/m
Weight kg
Itemno. 304
s/s
Itemno. 316
s/s
Class A 15
Type 010 with longitudinal grating "Wedge Wire Heelguard", stainless steel 1000 362 360 873 1436 23.6 49938 49939
Class B 125
Type 010 with longitudinal grating "Wedge Wire Heelsafe", stainless steel 1000 362 360 873 1436 23,60 47313 47331
Class D 400
Type 010 with G-TEC Ductile iron grating, SW 9 mm, KTL-coated, locked 1000 362 360 873 960 38,10 49745 –
AD
C1.1 H
Au
RA
to
n R
EC
YF
IX P
Ro
| DR
AIN
AG
E C
HA
NN
EL | P
G 11
tABLE 8 Recyfix® Pro 300 Accessories
Length mm
Width mm
Height mm
Weight kg
itemno.
End cap closed, galvanised, type 010 - 360 360 1.9 49783
End cap with horizontal UPVC-outlet DN 200, galvanised, Type 010 - 360 360 2.6 49791
RECYFIX® PRo 300 Accessories
FIg. 17 End cap closed, galvanised, type 010
FIg. 18 End cap with horizontal UPVC-outlet DN 200, galvanised, Type 010
Disclaimer: While every effort has been made to ensure that the information in this document is correct and accurate, users of Hygrade Water Infrastructure product or information within this document must make their own assessment of suitability for their particular application. Product dimensions are nominal only, and should be verified if critical to a particular installation. No warranty is either expressed, implied, or statutory made by Hygrade Water Infrastructure unless expressly stated in any sale and purchase agreement entered into between Hygrade Water Infrastructure and the user. June 2019
Scan for more information
BRISBANE (Head Office)42-44 Blue Eagle DriveMeadowbrook, QLD 4131
SYDNEY10 McPherson RoadSmeaton Grange, NSW 2567
1300 855 092hygradewater.com.au