Upload
vinod-subramaniam
View
41
Download
1
Tags:
Embed Size (px)
DESCRIPTION
int
Citation preview
Recent Trends in Automobile Engineering 2013
Abstract
Since the invention of the internal combustion engine, automotive engineers, speed junkies and racecar
designers have been searching for ways to boost its power. One way to add power is to build a bigger
engine. But bigger engines, which weigh more and cost more to build and maintain, are not always
better. Another way to add power is to make a normal-sized engine more efficient. Adding either a
turbocharger or a supercharger is a great way to achieve forced air induction. Both superchargers and
turbochargers pressurize the air intake to above atmospheric pressure. The difference between the two
devices is their source of energy. Turbocharger is an exhaust gas driven compressor used in internal-
combustion engines to increase the power output of the engine by increasing the mass of oxygen
entering the engine. A key advantage of turbochargers is that they offer a considerable increase in
engine power with only a slight increase in weight. Unlike turbochargers, which use the exhaust gases
created by combustion to power the compressor, superchargers draw their power directly from the
crankshaft. Superchargers increase intake by compressing air above atmospheric pressure, without
creating a vacuum. This forces more air into the engine, providing a "boost." With the additional air in
the boost, more fuel can be added to the charge, and the power of the engine is increased. There are
three types of superchargers: roots, centrifugal, twin-screw. The main difference among them is how
they move air to the intake manifold of the engine. Roots and twin-screw superchargers use different
types of meshing lobes, and a centrifugal supercharger uses an impeller, which draws air in. Although all
of these designs provide a boost, they differ considerably in their efficiency and sizes. The biggest
advantage of having a supercharger is the increased horsepower.
In this paper, the latest trends in automobile are discussed. The object of this paper is to provide an
intermediate solution to the problem of limited fossil fuels. Hydrogen, electric-fuel cell and bio-diesel
offer a better longer-term solution from imported petroleum. So, the intermediate solution to the
problem of limited fossil fuels is “HYBRIDS”. Hybrids just prolong the time period in which gas runs out.
Now, coming to the latest trends in automobiles is Gasoline + Electric power. The hybrid-powered cars
operate in the combination of both gasoline & electric power.
1
Recent Trends in Automobile Engineering 2013
The main advantage of these hybrid vehicles is that they have a provision for shutting off the gasoline
engine when the car is stopped. So, fuel is not wasted while idling. The hybrid drive runs on both the gas
and the electric motors to produce continuously variable output, a process the inventor calls “torque
amplification”. The parts of automobile that transmit power from the engine to the driving wheels make
up the power train. But the latest trend in automobile is “hybrid power train” which gains respect and is
discussed below.
The rapid development of electronic systems in automotive vehicles has been driven for decades
by constantly growing requirements of legislation for environmental protection, as well as rising
demands of the end-user to improve fuel economy, safety, driving comfort and driving
excitement. The manufacturers of mobile work machines also see themselves increasingly
confronted with these requirements. Can Robert Bosch GmbH use the technical experiences
from automobiles also in this area to efficiently develop high-quality electronic systems.
INTRODUCTION
The word automobile is made up of two words I,e.auto and mobile. Auto is self propelled and mobile is
vechicles and meaning of these two words is “self-propelled vehicle”.
Now a days the Indian automobile market in world is in second rank.
First the technology gap are being briged not only between India and world but also the present and
future. Almost every player is introducing new engines which are smaller but powerful,lighyer but
efficient.
1. AUTOMOBILES, FUEL AND CO2 IN A LONGER TERM PERSPECTIVE
Energy used and travel for transport purpose in wealthy countries is dominated by
automobiles.while fuel economy improvement and some slowing of the risein ownership and use of
automobile has lower the growth fuel use , these vehicles are account roufly for 9% of total energy used
in oecd countries. Their share in total energy use in developing countries is smaller, but rising rapidly (2).
Since most all fuel is from oil products or natural gas, automobiles also account for a significant amount
of global release of carbon dioxide, the main greenhouse gas associated
2
Recent Trends in Automobile Engineering 2013
with climate change. Hence the automobile and its energy use is a central focus of energy and
environmental authorities in almost every country.
This paper focuses on automobile fuel economy, defined as fuel use per traveled of automobiles and
household light trucks. By paying some attention to car ownership and use, as well as new
vehicle characteristics like weight, power, and fuel, policy makers gain of understanding of what is
causing total fuel use to rise, and what components of that rise might be changing towards restraint of
fuel use.
This work updates a series of papers by Schipper and co-workers. Schipper et al. (3,4) set out some of
the difficulties facing development of data and subsequent analysis of the components of automobile
fuel use, particularly in countries like the United States, where actual fuel use is not surveyed and
vehicle usage only inferred from infrequent travel surveys.
Two motivators for the use of hydrogen as an energy carrier today are:
1. To provide a transition strategy from hydrocarbon fuels to a carbonless society.
2. To enable renewable energy sources. The motivation requires a little discussion while the
second one is self-evident.
The most common and cost effective way to produce hydrogen today is the reformation of hydrocarbon
fuels specifically natural gas.
Power train is one that transmits power from the engine to the driving wheels. This power train forms
one of the parts of an automobile. These are the clutch, transmission, drive shaft and differential. In
most of the cars, power is delivered to the rear wheels (rear-wheel drive). Increasing number of car
engines however, transmit power to the front wheels (front-wheel drive).
The popular hybrid vehicles, which have been introduced officially by Lexus, are RX 400h and RX 330.The
hybrid functioning is nothing but based on gasoline and electric power. Commonly in automobiles
“gasoline engine” is dominant. The battery power is supplementary in Honda vehicles then the electric
3
Recent Trends in Automobile Engineering 2013
motors come into play. Whereas in Toyota vehicles, it is quite opposite with a gasoline engine providing
additional power.
The present trends in automobiles are nothing but these are running with battery and electric system.
Electric automobile is a motor vehicle powered by rechargeable batteries without the use of other fuel.
The advantage of these hybrid vehicles is: in both systems, the battery is recharged while driving. At
times, when the car is coasting. Neither gasoline nor electric power is needed, they need not be plugged
into an electrical outlet for charging.
2. HOW AN AUTOMOBILE CREATES ENERGY?
When fuel mixes with air in the engine of an automobile, a very powerful chemical reaction takes place.
Gasoline combines with oxygen to produce new gases and a great deal of heat. The gases expand
violently inside the combustion chamber of the engine and turn the motor to propel the car.
Much of the chemical energy in the automobile is lost in the form of heat energy that doesn’t work to
move the car. Instead, parts of the vehicle absorb the heat. The hot gases push the pistons up and
down.
This vertical motion is then changed to a rotary motion and causes the wheels to move. Pistons move
up and down the cylinders several thousands times a minute. Fuel must be continually burned and
exhaust gases removed to keep a car running.
2.1 Gasoline
Perhaps, the most widely used product refined from petroleum is gasoline. Gasoline is burned in an
internal-combustion engine to provide energy to power automobiles, airplanes, and other machinery. In
some English –speaking countries, such as the United Kingdom, gasoline is referred to as petrol.
Gasoline is a complex mixture containing hundreds of different hydrocarbons. Hydrocarbons are
4
Recent Trends in Automobile Engineering 2013
compounds comprised of the chemical elements hydrogen and carbon. Most of the hydrocarbons in
gasoline contain 4 to 12 carbon atoms per molecule, but they differ widely in structure. Gasoline is used
as an automobile fuel because it easily evaporates to a gas, or vaporizes, even at ordinary temperatures.
When it is burned, it releases a great deal of energy. This energy of combustion can be contained within
a system to do work such as drive an engine.
One such additive designed to improve the combustion of gasoline is tetraethyl lead (TEL). Gasoline to
which TEL has been added is called ethyl gasoline. An internal-combustion engine runs best on a fuel
that burns smoothly without exploding, or knocking. The addition of TEL causes gasoline to burn with
less knocking. It has been determined, however, that the lead of TEL in ethyl gasoline produces
poisonous lead oxide exhaust. Because of increased awareness of the problem of air pollution,
automobiles are now manufactured to accept lead free gasoline.
2.2 Power Train
The parts of the automobile that transmit power from the engine to the driving wheels makeup the
power train. These are the clutch, transmission, drive shaft, and differential. Due to the power delivered
to the rear wheels, transmission of power to the front wheels, which improves the traction because the
engines weight is centered over the wheels that power the automobile. It also eliminates the drive shaft
and the hump in the automobiles floor to accommodate it. This, in turn, increases interior legroom. An
alternative with similar advantages is the rear-engine, rear-wheel, drive automobile. Four-wheel drive
automobiles have been better traction and are generally used to travel rough country or to drive
through snow.
2.3 Hybrid power trains
The latest trends in gasoline + electric power Figure 1.
5
Recent Trends in Automobile Engineering 2013
Figure 1. Detroit city
DETROIT-Hybrid-powered cars which operate on a combination of gasoline and battery power. Detroit,
is a city placed in Michigan situated in Canada which is also near to the United States Of America named
after this city to the Hybrid powered car.
Background: Detroit has been a city of industrial excitement ever since Henry Ford rolled his first rickety
contraption out of his shed and onto the streets of the city back in 1896. Detroit, the nation's seventh
largest city, is a land of immense industrial power, and it owes almost all of it to the automobile. In a
real sense they make Detroit "America's muscle”.
6
Recent Trends in Automobile Engineering 2013
2.4 Luxury Hybrids
At Detroit’s auto show in early January 2004,Lexus officially introduced a hybrid sport-utility vehicle
based on the popular RX 330 (Figure.2), RX 400h will have a second generation version of Toyota’s
Hybrid synergy Drive that generates upto 270HP. Lexus general manager Denny Clements calls RX 400h
“The World’s First Luxury Hybrid Vehicle” and promises a driving range of more than 600 miles on one
tank of gasoline.
Figure.2 A Back-View of RX 330.
Toyota also will offer a Hybrid ‘SUV’, using it’s Highlander as a foundation. With output of 270 HP, The
Highlander Hybrid can accelerate to 60mph in less than 8 seconds, while yielding better fuel economy
than a compact sedan.
7
Recent Trends in Automobile Engineering 2013
2.5 Hybrid Accord
This fall, Honda will make a Hybrid power train available for it’s top selling Accord V-6 sedan. Innovative
Variable Cylinder Management Technology is supposed to give it a better performance than a regular V-
6 sedan, combined with four-cylinder fuel economy. Even Mercedes – Benz got into the act in
Detroit, with an S-class sedan dubbed the world’s first rear-wheel-drive hybrid concept vehicle.
2.5.1. How They Work?
Two different systems are used in today’s models. In Honda vehicles, the gasoline engine is dominant.
Battery power is supplementary. Electric motors come into play, augmenting the output of the gas
engine, when extra energy is needed for accelerating, passing or merging.
Toyota’s system is essentially opposite, with the gasoline engine providing additional power. For that
reason, a Prius can run for a while on battery power alone. When you stop on the accelerator pedal, the
gasoline engine switches on and the two power sources work in unison.
2.5.2. Go and Charge:
In both systems, the battery is recharged while driving, at times when the car is coasting and when
neither gasoline nor electric power is needed (temporarily). Hybrid automobiles never need to be
plugged into an electrical outlet for charging. If driven under more demanding conditions, with little or
no coasting, the gasoline engine will keep operating as long as needed until the battery is suitably
charged.
Without sophisticated computer control, hybrids could not function at all. The computer must
constantly analyze operating conditions to determine which power sources need to be active, and to
what extent. The driver needs no action. Hybrid systems work transparently. The only evidence of their
presence is a tiny jolt when the gasoline engine turns itself on or off.
8
Recent Trends in Automobile Engineering 2013
Hybrid vehicles also have a provision for shutting off the gasoline engine when the car is stopped, so fuel
is not wasted while idling. In Honda's hybrids, the gasoline engine starts up again when you push on the
accelerator pedal, or move the manual shift lever into first gear. Toyotas can start off from a stoplight or
stop sign under battery power alone. The gasoline engine kicks on when its additional energy is needed.
2.5.3. Miles of Appeal:
Frugal gas mileage is the main attraction. According to EPA estimates, the 2004 Prius can get up to 60
miles per gallon in city driving and 51 mpg on the highway. Honda's Civic Hybrid earns an EPA estimate
of 48-mpg city/ 47 mpg highway with manual shift, or 46/51 mpg with a continuously variable
(clutchless) transmission.
Because gasoline prices are still near their lowest point ever, compared to the overall cost of living, fuel
savings alone aren't enough to offset the price of a hybrid automobile. Shoppers are turning to hybrids
because they produce fewer emissions, and because they don't like to drive wasteful vehicles. In short,
many buy hybrids because "it's the right thing to do," rather than for strict economic reasons.
2.5.4. Why hybrids are for today:
Hybrids are an intermediate solution to the problem of limited fossil fuels. Hydrogen, electric, fuel cell
(right) and biodiesel offer a better longer-term solution from imported petroleum. Hybrids just prolong
the date in which gas runs out. In effect, the more fuel efficient we become, the slower the rate of rising
gas prices and ergo buys us time to develop alternative fuels. We’ll all be using gas until an alternative
technology ends up costing us less.
9
Recent Trends in Automobile Engineering 2013
Figure.3 Hybrid Car (RX400h)
2.5.5. Performance factor:
If all else – performance, safety, reliability, etc. – were equal, not many people would buy a hybrid. But
they are not. The Escape and Accord and the RX400h are expected to offer better performance, for less
gas due to their high-torque electric motor.
Let’s take the hybrid Honda for example, if you drive 15,000 miles a year and gas averages $2.50 a
gallon, you could save $391 a year on fuel. Include the tax deduction, add additional interest for the
extra $3,300 you’ll need to shell out, and in 5 years, you could still be $1,200 or more behind a normal
Accord. So ask yourself. Is the additional performance, and the earth-friendly glow of the digital
dashboard worth the extra cash? You might decide yes, but certainly it’s not a bad thing to say no.
10
Recent Trends in Automobile Engineering 2013
Figure.4 Hybrid Car (RX400h Engine)
2.5.6. Hybrid successor? Or rival?
The drive runs both gas and electric motors to produce continuously variable output, a process the
inventor calls “torque amplification.” Many of the designs are similar to continuously variable
transmissions (CVTs) used by such vehicles as the Toyota Prius, Ford Five Hundred/Mercury Montego
(4WD), and the Nissan Murano. Because the drive uses electric motors, it resembles the Prius closely,
though, according to Van Cor, the symbiotic drive would always be engaged unlike the Prius engine
which switches to gasoline depending on driving conditions.
2.6. Electric Automobile
Figure5 Electric Car
11
Recent Trends in Automobile Engineering 2013
A motor vehicle powered by rechargeable batteries without the use of other fuel. The first electric
automobiles were produced from the 1880s until the 1920s. Such cars had low speed and limited range
but were quiet, with low maintenance costs. They were rendered unpopular by the advent of cars with
powerful internal-combustion engines, which were also eventually cheaper to produce. Because of
concern over petroleum scarcity and pollution, new experimental versions of electric cars emerged
beginning in the 1960s. Their speed and range increased somewhat, but the cars showed no sign of
catching on. In mid-1990, General Motors announced the creation of an electric car, Impact, which could
reach a top speed of 75 miles (121 kilometers) per hour and could travel 120 miles (193 kilometers) on
one charge, though it could not do both at the same time.
The inefficiency of the battery (one twentieth the fuel efficiency of gasoline-fueled cars) prohibits mass
marketing, along with the cost of replacing the lead-acid battery. Several experimental, electrically
powered automobiles were built in Europe during the 1880s. One of the first "electrics" in the United
States was produced by William Morrison in 1891. About 54 United States manufacturers turned out
almost 35,000 electric cars between 1896 and 1915--the period of their greatest popularity. The
Columbia, the Baker, and the Riker were among the more famous makes.
The electric car ran smoothly and was simple to operate. However, it did not run efficiently at speeds of
more than 20 miles per hour and could not travel more than 50 miles without having its batteries
recharged.
12
Recent Trends in Automobile Engineering 2013
Figure.6 Electric Car (Phoenix)
At a solar and electric power exposition in Phoenix, Ariz., a man attends to an experimental
electric car made by California Electric Cars.
3. RESULTS FOR ON ROAD FUEL ECONOMY
Figure 1 shows on-road fuel economy for six countries: US, Japan, UK, France, Germany, and Italy, with
Germany representing “western” Germany before 1995 and all Germany from 1991, leaving four
overlapping years. Diesel and LPG are included at gasoline equivalents defined above.
4.NEW CAR FUEL ECONOMY
New car fuel economy, as measured by tests and weighted by sales, is an important indicator of how on-
road fuel economy will behave as the fleet is renewed. But a cautionary note is important. Ref. (5) and
references therein have emphasized the enormous uncertainties in interpreting sales-weighted test
values of vehicles. While such indicators are extremely important in determining the overall impact of
13
Recent Trends in Automobile Engineering 2013
technology and
consumer choice, they are very difficult to translate into on-road values that can be matched derived
from bottom –up surveys or top-down analysis applied to the entire stock. Ref. (18) and other US
EPA sources make some estimates of the approximate translation of CAFÉ test values of each model
year EPA sources make some estimates of the approximate translation of CAFÉ test values of each
model year into on-road that are remarkably realistic. For the 1996-2005 period, for example, (18)
estimated on road MPG of the combined new car and light truck sales at 21.3+-0.2 MPG, remarkably
close to the estimate that as not fluctuated very much. Were the “real values” for these cars that would
be measured by
surveys much different, the on road estimates would not have been so flat.
New vehicle sales-weighted fuel economy gasoline equivalents for each year shown, using each
country/region’s testing procedures, from each country’s official publications.
With this in mind, Figure 2 shows US, Japan, and a number of European Country averages for new
vehicle fuel economy. For the US, the EPA light truck average is counted with cars, using 80% of the light
truck sales as indicative of how many should be averaged with cars sold to give a combined value.
Japanese values are chained from the 15-mode (and earlier 10mode) tests reported by ( 21). European
values are given as weighted averages provided by EU (22) and before then the European Automakers
Association (ACEA) as tabulated by the European Council of Ministers of Transport (S. Perkins,
ECMT/OECD, priv., comm. Figure 3 then shows these values indexed to their 1995 values, the year from
which EU authorities tabulated figures to gauge the progress of their voluntary agreement on lower CO2
emissions/fuel economy. Indexing eliminates misleading comparisons of countries with different test
procedures. As noted above
diesel is counted at its energy equivalent, which gives somewhat different values for France, Italy .
Long term trends in new car sales-weighted fuel economy indexed to 1995. Source: Official national
sources, EU
What is clear from either portrayal is that there have been three periods—the 1970s and early 1980s
which saw a dramatic decline in new vehicle fuel intensity in the US and (from 1975/6, when data are
available), more modest but still substantial declines in Japan and EU. In the mid 1980s to mid 1990s,
EU new vehicle fuel intensities were stagnant while those in Japan and the US rose as SUVs in the US
and larger cars in Japan became increasingly more important. After 1995, values in Japan and EU headed
14
Recent Trends in Automobile Engineering 2013
down again presumably as voluntary agreements came under discussion, while the US average
fluctuated. While the E values through 2005, approximately 165 gm/km of CO2 in absolute terms, fall
short of a path to the ultimate goal (140 gm/km) the improvements are still in stark contrast to
developments in the US, where, ironically, the relative changes in fuel prices from higher crude prices
have been much larger because so little of the price is taxation.
5. IMPACT OF DIESELS – AMBIGUOUS
Shifting from gasoline to diesel should save fuel and reduce CO2 emissions as well, goes the Brussels. In
theory diesels are much more efficient, as matched pair analysis in Schipper et al 2002 showed.
But the same analysis questioned the ultimate role of shifting to diesel if the goal is less fuel use or
carbon emissions than otherwise.
The analysis of data in the 2002 study was reviewed briefly and the same important surprises still hold.
Recall that when account is taken of the greater energy density of diesel and the greater CO2 released
per unit of energy in diesel fuel, diesel fuel economy values have to be increased by 12% in energy terms
or
18% in CO2 terms before they can be compared with gasoline. This step cuts the apparent advantage
6. THE RACE FOR WEIGHT, POWER, AND SPEED
Throughout this report we have avoided using the term “efficiency” for the indicators we have
presented. The reason is clear – real fuel efficiency, if expressed as energy required to move a given
mass a given distanceor the energy required to provide a given level of power to an engine, or to extract
a given amount of power from a given volume has risen markedly in the US and Europe. In simple terms,
these efficiency improvements have more or less countered increased weight and power (as well as
extras) in overwhelmed them in one period in Japan, but only taken back part of the improvements in
true efficiency in Europe.
New car engine power (diesel and gasoline averaged).
shows new vehicle weight, Figure 5 power in the US and selected European countries over time (7,17).
The European countries bracket the averages for years where all countries’ data are available. Swedes
buy the largest cars, Italians the smallest in Europe. These figures have been creeping up in both the US
and Europe. In Japan, however, an indicator of a possible trend break trend is the percentage of mini-
cars in overall new car purchases, up from the teens in the 1980s, the 20s in the 1990s, and the 30s after
15
Recent Trends in Automobile Engineering 2013
2000
(21). This represents a break in trends, motivated as much by the lack of space for parking and narrow
streets .
Fuel consumption to power ratio for new cars
When we divide fuel economy by weight or by power, we obtain indicators of “efficiency” in the narrow
sense (Figs 6 and 7). The first reveals a big drop in fuel use required to move a vehicle. Since power to
weight ratios increases in the US and Europe, this means acceleration and top speed have both
increased. That is, the lower fuel-use to weight ratio signals greater efficiency, not declining
performance, power/weight is up in all countries. The lower fuel use to power ratio says the engine
itself is more efficient, providing potentially more power for a given average fuel consumption. In short
efficiency has fed power
7.DRIVING FORCES
The foregoing suggests that short of a low-carbon fuel that can be produce at a level of 20 million
barrels per day for IEA countries, serious oil saving or reduction in GHG emissions – say bringing
automobiles back to their 1990 levels of emissions or fuel use --- cannot occur without both reductions
in vehicle use and an end to the upward spiral of weight and power. What could drive this change?
8.CHANGING THE TRENDS?
Johansson and Schipper’s (8) findings suggest economic forces – fuel prices – are a important
determinant fuel use for cars. In the US, at least, the reaction to higher prices has been small (26,20). Yet
comparing both new vehicle fuel economy and changes in the stock among the US, EU and Japan since
2000 show that improvements in the later two but not in the first. This occurred even though the
relative price changes in the US were larger since the price of crude and refining represents a much
larger share to consumers than US were larger since the price of crude and refining represents a much
larger share to consumers than Japan and Europe, where taxes are 2-3 times higher. From this
comparison it is difficult not to conclude that the Voluntary agreements in both regions affected new
vehicle fuel economy.
The issue remains: what will change the car buying preferences of Americans? In 2005 and 2006 the
share of SUVs in the total number of light duty vehicles sold fell slightly, but average weight, engine size
16
Recent Trends in Automobile Engineering 2013
and horsepower of the combined fleet still increased and the stalemate of technology and car remained.
In the EU, by contrast, efficiency factors improved more than car power or weight (EU 2006 leading to a
real improvement in both new vehicle and fleet, on-road fuel intensity. In Japan the arrest increased car
power and size and technology together led to fuel economy improvements.
TRENDS IN AC DRIVE APPLICATIONS
AC drives were traditionally first applied in process industries, such as cement, plastic, textile,etc. With
development of various vector control methods, AC drives started also to replace DC drives in industries
requiring high precision of speed control and good dynamic performance, such as machine tools,
robotics, metal rollin g, paper mill finishing lines, etc. These are all applications which must have
adjustable speed, by Induction motors are predominantly used, although at power below 10 KW, PM
motors have been preferred in servo applications. That application has had spectacular growth over the
last 20 years. For example, over that period, one manufacturer has approximately halved the time
period for sale of each subsequent However, because AC drive penetration into these applications is
almost 100%, (adjustable speed drives are provided to all applications where the speed has to be
regulated), the future growth in this application segment is expected to essentially.
Fuel cell drive for bus
* Inverter package
* Improve engine efficiency
* The modern gasoline engine is nearing its peak efficiency, only small gains can be made by enhanced
combustion and variable camshaft timing.
* The diesel cycle engine may once again take over as the engine of choice.
* A small turbodiesel / electric hybrid with a CVT and regenerative braking provides the most benefit,
40% to 80% gain.
Rolling resistance
17
Recent Trends in Automobile Engineering 2013
Changing to tall and thin tires for reduced rolling resistance can add another 2 to 4% gain.
* Mounted to Carbonfiber and magnesium wheels for low weight, another 2% gain.
* Reducing vehicle load
* The passive use of electronics provide multiple benefits:
o Flat body panels can be constructed of photovoltaic materials to recharge the batteries and provide
electricity to load devices.
o This can provide up to 5 to 10% gain.
Electronics can also be used for:
o Brakes
o Steering
o Temperature control (heat pump)
Engine support (coolant circulation
Vehicle Selection
• Choose the appropriate vehicle for the task.
• One passenger in a large sedan for a short commute is inefficient.
• 5 passengers in a small sedan for a long commute is also inefficient.
• The smaller vehicle will work harder to maintain road speeds and traffic conditions.
• Case: 1997 Chevy Malibu with 5 occupants, Austin to Dallas, 16 mpg loaded, 30 mpg with driver only
• Case: 1999 Ford Crown Victoria with 5 occupants, Austin to Dallas, 17 mpg loaded, 19 mpg with driver
only.
Lastly
• What about the 100 mpg car?
• To obtain 100 mpg in a modern auto, we need the following improvements:
• Improve aerodynamics (wind resistance increases to the square of the speed)
• Reduce weight
• Improve engine efficiency
• Reduce rolling resistance
• Dramatically increase the use of vehicle electronics
18
Recent Trends in Automobile Engineering 2013
CONCLUSIONS
On-road fuel economy is improving in Japan and Europe, but hardly at all in the US, at least through
2006. Fuel economy (miles/gallon) is higher in Europe and to some extent Japan than in the U.S. In 2005,
on-road fuel economy in the U.S. was slightly above 11 l/100 km (above 21mpg. Japan’s average was
10.5 km/100 km (22 mpg), while Germany, the U.K. and France were 8 (29), 7.7 (31) and 7.5 (32)
respectively. This real world” on-road figures include diesel and other fuels. For the US, the figure
includes the portion of light trucks that are household vehicles, such as SUVs, all of which are far less
significant in countries.
Research and development in automobile manufacturing are centered on substituting fossil fuels.
Hydrogen electric fuel cells, with hybrid accord are the current trend. Hydrogen is an abundant and
productive fuel with many potential uses. Transition to “Hydrogen Economy” is on its way barriers do
exist, can be broken with education environmental impacts of hydrogen energy are low. These facts
make hydrogen the energy of the future.
5. Reference:
1. www.scholar.google.com
2. www.images.google.com
3. www.atlavista.com
4. Compton’s encyclopedia
19