Readme Ufriilth

8/12/2019 Readme Ufriilth

1/8

CANON SOFTWARE LICENSE AGREEMENT

IMPORTANT!

This is a legal agreement ("Agreement") between you and Canon Inc. ("Canon")and governing your use of Canon's software programs including the relatedmanuals or any printed material thereof (the "Software") for certain Canon'scopying machines, printers and multifunctional peripherals (the "Products").

READ CAREFULLY AND UNDERSTAND ALL OF THE RIGHTS ANDRESTRICTIONS DESCRIBED IN THIS AGREEMENT BEFORE USING THESOFTWARE. BY CLICKING THE BUTTON INDICATING YOUR ACCEPTANCEAS STATED BELOW OR USING THE SOFTWARE, YOU AGREE TO BE BOUNDBY THE TERMS AND CONDITIONS OF THIS AGREEMENT.IF YOU DO NOT AGREE TO THE FOLLOWING TERMS AND CONDITIONS OF THIS AGREEMENT,DO NOT USE THE SOFTWARE. NO REFUND WILL BE MADE BECAUSE THESOFTWARE WAS PROVIDED TO YOU AT NO CHARGE.

1. GRANT OF LICENSECanon grants you a personal, limited and non-exclusive license to use ("use"as used herein shall include storing, loading, installing, accessing, executingor displaying) the Software solely for the use with Products only on computersdirectly or via network connected to the Products (the "Designated Computer").

You may allow other users of other computers connected to your DesignatedComputer to use the Software, provided that you must assure that all such usersshall abide by the terms of this Agreement and shall be subject to restrictionsand obligations borne by you hereunder.

You may make one copy of the Software solely for a back-up purpose.

2. RESTRICTIONSYou shall not use the Software except as expressly granted or permitted herein,and shall not assign, sublicense, sell, rent, lease, loan, convey or transferto any third party the Software. You shall not alter, translate or convert toanother programming language, modify, disassemble, decompile or otherwisereverse engineer the Software and you shall not have any third party to do so.

3. COPYRIGHT NOTICEYou shall not modify, remove or delete any copyright notice of Canon or itslicensors contained in the Software, including any copy thereof.

4. OWNERSHIPCanon and its licensors retain in all respects the title, ownership andintellectual property rights in and to the Software. Except as expresslyprovided herein, no license or right, express or implied, is hereby conveyed orgranted by Canon to you for any intellectual property of Canon and itslicensors.

5. EXPORT RESTRICTION

You agree to comply with all export laws and restrictions and regulations ofthe country involved, and not to export or re-export, directly or indirectly,the Software in violation of any such laws, restrictions and regulations, orwithout all necessary approvals.

6. NO SUPPORTNEITHER CANON, CANON'S SUBSIDIARIES OR AFFILIATES, THEIRDISTRIBUTORS, OR DEALERS NOR CANON'S LICENSORS ARERESPONSIBLE FOR MAINTAINING OR HELPING YOU TO USE THESOFTWARE. NO UPDATES, FIXES OR SUPPORTS WILL BE MADE


2/8

AVAILABLE FOR THE SOFTWARE.

7. NO WARRANTY AND DISCLAIMER OF INDEMNITY[NO WARRANTY] THE SOFTWARE IS PROVIDED "AS IS" WITHOUTWARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED,INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OFMERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THESOFTWARE IS WITH YOU. SHOULD THE SOFTWARE PROVEDEFECTIVE, YOU ASSUME THE ENTIRE COST OF ALL NECESSARYSERVICING, REPAIR OR CORRECTION. SOME STATES OR LEGALJURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIEDWARRANTIES, SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU.THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAYALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE ORJURISDICTION TO JURISDICTION.

NEITHER CANON, CANON'S SUBSIDIARIES OR AFFILIATES, THEIRDISTRIBUTORS, OR DEALERS NOR CANON'S LICENSORS WARRANTTHAT THE FUNCTIONS CONTAINED IN THE SOFTWARE WILL MEETYOUR REQUIREMENTS OR THAT THE OPERATION OF THE SOFTWAREWILL BE UNINTERRUPTED OR ERROR FREE.

[NO LIABILITY FOR DAMAGES] IN NO EVENT SHALL EITHER CANON,

CANON'S SUBSIDIARIES OR AFFILIATES, THEIR DISTRIBUTORSDEALERS OR CANON'S LICENSORS BE LIABLE FOR ANY DAMAGESWHATSOEVER (INCLUDING WITHOUT LIMITATION, LOSS OF BUSINESSPROFITS, LOSS OF BUSINESS INFORMATION, LOSS OF BUSINESSINTERRUPTION OR OTHER COMPENSATORY, INCIDENTAL ORCONSEQUENTIAL DAMAGES) ARISING OUT OF THE SOFTWARE, USETHEREOF OR INABILITY TO USE THE SOFTWARE EVEN IF EITHERCANON, CANON'S SUBSIDIARIES OR AFFILIATES, THEIRDISTRIBUTORS, DEALERS OR CANON'S LICENSORS HAVE BEENADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES ORLEGAL JURISDICTIONS DO NOT ALLOW THE LIMITATION OREXCLUSION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIALDAMAGES, OR PERSONAL INJURY OR DEATH RESULTING FROM

NEGLIGENCE ON THE PART OF SELLER, SO THE ABOVE LIMITATIONOR EXCLUSION MAY NOT APPLY TO YOU.

[RELEASE OF LIABILITY] TO THE FULL EXTENT PERMITTED BYAPPLICABLE LAW, YOU HEREBY RELEASE CANON, CANON'SSUBSIDIARIES AND AFFILIATES, THEIR DISTRIBUTORS, DEALERS ANDCANON'S LICENSORS FROM ANY AND ALL LIABILITY ARISING FROMOR RELATED TO ALL CLAIMS CONCERNING THE SOFTWARE OR ITSUSE.

8. TERMThis Agreement is effective upon your acceptance hereof by clickingthe button indicating your acceptance as stated below or using the Software

and remains in effect until terminated. You may terminate this Agreementby destroying the Software including any and all copies thereof.This Agreement shall also terminate if you fail to comply with any terms hereof.Upon termination of this Agreement, in addition to Canon enforcingits respective legal rights, you must then promptly destroythe Software including any and all copies thereof.Notwithstanding the foregoing, Sections 4, and 7 through 11 shallsurvive any termination of this Agreement.


3/8

9. U.S. GOVERNMENT RESTRICTED RIGHTS NOTICEThe Software is a "commercial item," as that term is defined at 48 C.F.R. 2.101(October 1995), consisting of "commercial computer software" and "commercialcomputer software documentation," as such terms are used in 48 C.F.R. 12.212(September 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1through 227.7202-4 (June 1995), all U.S. Government End Users shall acquire theSoftware with only those rights set forth herein. Manufacturer is Canon Inc./30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan.

10. SEVERABILITYIn the event that any section hereof is declared or found to be illegal by anycourt or tribunal of competent jurisdiction, such section shall be null andvoid with respect to the jurisdiction of that court or tribunal and all theremaining provisions hereof shall remain in full force and effect.

11. ACKNOWLEDGEMENTBY CLICKING THE BUTTON INDICATING YOUR ACCEPTANCE AS STATED BELOWOR USING THE SOFTWARE, YOU ACKNOWLEDGE THAT YOU HAVE READ THISAGREEMENT, UNDERSTOOD IT, AND AGREE TO BE BOUND BY ITS TERMSAND CONDITIONS. YOU ALSO AGREE THAT THIS AGREEMENT IS THECOMPLETE AND EXCLUSIVE STATEMENT OF AGREEMENT BETWEEN YOUAND CANON CONCERNING THE SUBJECT MATTER HEREOF ANDSUPERSEDES ALL PROPOSALS OR PRIOR AGREEMENTS, VERBAL ORWRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN YOU AND

CANON RELATING TO THE SUBJECT MATTER HEREOF. NO AMENDMENTTO THIS AGREEMENT SHALL BE EFFECTIVE UNLESS SIGNED BY A DULYAUTHORISED REPRESENTATIVE OF CANON.

Should you have any questions concerning this Agreement, or if you desire tocontact Canon for any reason, please write to Canon's sales subsidiary ordistributor/dealer, serving the country where you obtained the Products.

***************************************************************************Copyright CANON INC. 2008

- Canon UFR II Printer Driver - Version 2.30 for Microsoft Windows XP/Server 2003/Vista/Server 2008 x64 Edition**************************************************************************This README file contains supplemental information to help you install anduse your UFR II printer driver software with Windows XP, Windows Server 2003,Windows Vista, and Windows Server 2008 x64 Edition.As with most software and hardware products, some information is madeavailable after the development of the manual. Updated informationregarding this driver software is provided in this README file. If yourequire additional assistance, please contact your local Canon company.

This software is based in part on the work of Independent JPEG group.

Windows and Windows Vista are trademarks of Microsoft Corporationin the United States and other countries.

Citrix, MetaFrame, and MetaFrame XP are trademarks of Citrix Systems, Inc.in the United States and other countries.

Other product and company names herein may be the trademarks of theirrespective owners.


4/8

CONTENTS========OverviewSystem RequirementsInstalling the Printer DriverAccessing the Properties Dialog BoxAccessing Help InformationCautions, Limitations and Restrictions

Overview========This printer driver allows you to print documents from any Windows XP,Windows Server 2003, Windows Vista, or Windows Server 2008 x64 Editionapplication to your printer.

Note----* You can change the factory default settings of the printer driver to create customized driver sets using the Canon Driver Configuration Tool. For detailed information about this utility, refer to the Canon Driver Configuration Tool User's Guide.

System Requirements===================The Canon UFR II Printer Driver can be used in the followingsystem environments:

* Operating System Software Microsoft Windows XP Professional x64 Edition Microsoft Windows Server 2003, Enterprise x64 Edition Microsoft Windows Server 2003, Standard x64 Edition Microsoft Windows Vista x64 Edition Microsoft Windows Server 2008 x64 Edition

* Computer

Any computer which runs the above operating system software properly. However, at least one of the following output ports is required:

- network interface- USB port

The network interface is recommended for the highest quality printing throughput.

Installing the Printer Driver=============================To use this printer driver with software applications that operate

with Microsoft Windows XP/Server 2003/Vista/Server 2008 x64 Edition,use the following installation procedure.

Note----* If you log on Windows XP/Server 2003 x64 Edition as a Power User and run the installer, the installation may not be completed correctly. In this case, log in as an Administrator, and then retry the installation.* If a message prompting you to restart your computer is displayed when using the installer, make sure to restart your computer.


5/8


6/8

8. Follow the instructions on the screen to continue, and then click the Finish button to start copying the files.

You are now ready to print from any Windows software application.

To install using a USB connection:You can print in a USB environment. Install the printer driver through a USBconnection.

1. In the \UFRII\uk_eng\x64 folder, double-click the Setup.exe icon to start the installation process.2. In the first dialog box of the Printer Driver Setup Wizard, click the Next button, and then follow the instructions on the screen.3. Select Install with USB Connection, and then click the Next button.4. Click the Yes button in the message box asking if you want to start the installation.5. When a dialog box prompts, connect the USB plug, and then turn the printer on.6. After the files are copied, click the Next button.7. Click the Exit button to finish the installation program.

Accessing the Properties Dialog Box======================================

The Properties dialog box contains several sheets that allow you tosetup and control your printer. To access the Properties dialog box, use thefollowing procedures:

To access from the Desktop:1. Click the Start button, point to Settings, and then click Printers. - If you are using Windows XP Professional/Server 2003, on the Start menu, click Printers and Faxes. - If you are using Windows Vista/Server 2008, on the Start menu, click Control

Panel, and then Printers.2. Right-click the printer icon for your printer in the Printers folder, and then click Properties to open the Printer Properties dialog box, or click

Printing Preferences to open the Document Properties dialog box.

To access from within an application:1. Click the Print command to display the Print dialog box.2. Select your printer name from the drop-down list box, and then click the Properties button.

Accessing Help Information==========================From the Properties dialog box, you can click the Help button todisplay the information about the UFR II printer driver.

Cautions, Limitations and Restrictions======================================1. When using the collate function of the application and Saddle Stitch is specified for Booklet Printing, all paper will be sorted and saddle stitched. When using Saddle Stitch function for Booklet Printing, disable the collate function of the application.

2. When creating a custom paper size in the Print Server Properties dialog box,


7/8

specify the margins as follows: - 0.50cm/0.20in or more

3. When installing with Add Printer from the Printer Folder, the Cannot find Digital Signature message may appear. If this message appears, continue with the installation. The printer will install correctly.

4. When you select Paper Type for Select by in the Paper Source sheet, select Same Paper for All Pages for Paper Selection if you want to use Tab Paper to print a document. If you specify several different paper types to print each pages of a document, the print out on the Tab Paper may not be correct.

5. When printing from QuarkXPress, the document may not be printed and blank pages are output. In this case, select Disabled for Spooling at Host in the Device Settings sheet.

6. When printing a document to which EPS objects are attached, the printed output may not be correct.

7. It is necessary to use TCP/IP as a network protocol in order to set up the printer configuration automatically when using a Remote Desktop environment, or when Windows is shared by multiple users.

8. When inserting inserted sheets into the document, if you accidentally

specify a drawer that contains tab paper as the paper source for the inserted sheets, the paper source automatically returns to the plain paper setting.

9. When you use Adobe Illustrator 9.0 or later and do not select the Bitmap Printing option, it may take a long time to finish printing, or thin lines or characters may be blurred. If you experience such problem, select the Bitmap Printing option.

10.If you print a document on a PC with a slow processing speed, it may take a long time to finish printing.

11.When you select Disabled for Spooling at Host in the Device Settings sheet,

specify a cassette as a paper source for booklet printing.

12.If you select Transparency or Label for Paper Type in the Paper Source sheet, a message indicating that you cannot print the document unless you change the Paper Type may appear. If this message appears, you may be able to print a document by deselecting the Offset check box in the Finishing sheet.

13.There may be cases where the Custom Paper Type information registered in the printer is not acquired correctly when installing the printer driver. If so, reacquire the correct information by clicking on the Get Device Status button in the Device Settings sheet, or the Get Paper Details button in the Paper Settings dialog box, displayed by clicking the Settings button

in the Paper Source sheet.

14.When an "@" character is used in the name of the printer, the printer will become unrecognizable by the operating system because of an invalid printer name thus disabling printing, operation and setup.

15.If you print a document that has an odd number of pages as a two-sided document from an application, the application may automatically insert a blank page to bring the number of pages up to an even number. When this happens, the blank page inserted by the application is counted up in the


8/8

same way as a printed page.

16.To register the custom paper size you want to use, access the Document Properties dialog box from the Printers folder with Administrator privileges,

and then specify the paper size in the Custom Paper Size Settings dialog boxwhich is displayed by clicking the Custom Paper Size button in the Page

Setup sheet.

17.When you log on to an Administrator account that is different from the one used to install the software, you will not be able to access the driver properties with Administrator privileges. To access the driver properties, select [Run as Administrator].

18.In certain applications, thickness of a line can be set to a value smaller than 1pt but the actual thickness in the printout may be equivalent to that of an 1pt line.

19.When a document is output at a resolution of 1200 dpi set from an application, jaggies in images may be more noticeable than when the document is printed at 600 dpi.

20.If you are using a USB connection with the printer to print, and cancel a print job that is currently printing from your computer

using the print spooler, the printer may not return to a ready state. In this state, you can print via USB, but not via a network. In order to be able to print from a network, cancel the print job from the control panel of the printer prior to printing.

21.For Windows Server 2008 installed with Server Core option, the followinglimitations exist on using the printer driver.

- You cannot install the driver with the installer. Use the installation options of Windows. - Some print options are not available under local environment or Windows

Remote Desktop environment.

Documents

Readme Ufriilth