7/30/2019 readme-printer

1/2

Copyright CANON INC. 2000-2008. All Rights Reserved.

____________________________________________________________________

Canon iP4600 seriesCanon IJ Printer Driver Version 2.21for Microsoft WindowsInstructions

____________________________________________________________________

Microsoft is a registered trademark of Microsoft Corporation.Windows is a trademark or registered trademark of MicrosoftCorporation in the U.S. and/or other countries.Windows Vista is a trademark or registered trademark of MicrosoftCorporation in the U.S. and/or other countries.All brand names and product names mentioned in this document aretrademarks or registered trademarks of their respective companies.

____________________________________________________________________

< Contents >

IntroductionForeword

Installation Components

Specifying Printer Driver SettingsOpening the Printer Driver Setup Window

====================================================================Introduction====================================================================

< Foreword >

This Readme gives you important information about setting up andusing the Canon IJ Printer Driver with which the Readme is

distributed. The Canon IJ Printer Driver allows you to print onyour Canon IJ printer from applications running under MicrosoftWindows Vista TM, Microsoft Windows XP or Microsoft Windows 2000.Before you can use your printer, you must install the printerdriver on your computer.

< Installation Components >

The following components make up the installation package:

- Installer (Setup.exe)Installs the Canon IJ Printer Driver on your computer.

- Canon IJ Printer Driver (referred to as the "printer driver"in this document)The software that allows you to print on your printer.

- UninstallerRemoves the printer driver from your computer.

- Readme (readme_english.txt)This document. It contains important information about theprinter driver. After you install the driver, you can display

7/30/2019 readme-printer

2/2

Readme by clicking the [Start] menu and selecting[All Programs]-[Your printer model name]-[Readme].

====================================================================Specifying Printer Driver Settings====================================================================

< Opening the Printer Driver Setup Window >

- Opening the window from your applicationThe typical way to open the printer driver from your applicationis to select [File]-[Page Setup] and click [Printer], or select[File]-[Print...] and click [Properties].

- Opening the window directlyTo specify a regularly-used setup or to access your printer'smaintenance functions, use the procedure below.

1) From the [Start] menu, select the following items:For Windows Vista: [Control Panel]-[Hardware and Sound]-[Printers]For Windows XP: [Control Panel]-[Printers and OtherHardware]-[Printers and Faxes]For Windows 2000: [Settings]-[Printers]

2) Click the icon of the printer model to be used.3) From the [File] menu, select [Printing Preferences].

Note:Do not change the settings on the [Advanced] tab, which isdisplayed when the printer driver setup screen is openedfrom [Properties].If you change any of the settings, some of the functions maybecome disabled and you will not be able to use them.