/******************************************************************************* * /* /* READ_ME /* /* /* /* DEIF A/S /* /* Please read this carefully prior to updating your unit /* /* /* DEIF A/S Oct. 2001 /ASC 2004/SM 2006/BW 2009/BW /******************************************************************************* *

############# DO NOT DOWNLOAD V.3.xx.x application to a V. 2 device ############ #

Safety precautions before downloading The Multi-line 2 is not be able to control the genset during downloading and the protection functions will not be active. All the outputs of the Multi-line 2 wi ll be de-energised. Because of this the genset must be stopped and precautions must be taken to ensu re that it does not start up during the downloading process.

How to update the Multi-line 2 AGC application software What is necessary? Serial cable Multi-line 2 Multi-line 2 Multi-line 2 from computer to multi-line 2 unit AGC unit Utility Software (download from the Internet or from CD-ROM) application software

The Utility Software is the user interface program and can be downloaded from th e DEIF web site: 1. Visit http://www.deif.com/Download_centre/Software_download.aspx 2. Select "Multi-Line 2 Utility Sowftware V.3.x". 3. Follow the instructions. or 1. Insert our CD-ROM in your computer and select "Full dokumentation and PC soft ware". The CD-ROM is supplied with the Multi-line 2. 2. Select the utility software, which you want to install

The .a37 file can be opened through the utility software: 1. Open the Multi-line 2 Utility Software 2. Press the "Settings" button placed on the top menu bar and choose your settin g (port no., Device ID etc.) 3. Press the "Connect" button placed on the top menu bar (connection from comput er to Multi-line 2 unit). 4. Press the "Parameters" button placed on the left menu and upload the existing parameters. "Upload" button is placed on the top menu bar. Once the parameters are uploaded save the parameter file in a known directory. "Save" button is plac ed on the top menu bar. 5. Press the "Flash" button placed on the top menu bar and you will be asked for a password. Enter the password (the password is the same as required to change parameters in the multi-line via the display unit). 6. Open the file xxxxxxxx.a37 which you have just downloaded and download will n ow proceed. It will take 3-4 minutes. Parameter file. The settings must be updated from the parameter file saved in number 4. This mus t be done manually since parameter files from different software versions are no t in the same format.