raugeo ground-Source SyStemS - Rehau · partS liSt 827300/11 en ENERGY EFFICIENCY. 2 ... RAUGEO Helix® Probes and Accessories ... 131703-150 150 32 x 2,9 169 323

Building SolutionsAutomotive

Industry

www.rehau.co.uk/groundsourceValid from May 2013Subject to Technical Alterations

raugeo ground-Source SyStemSinnovative heating & cooling SolutionSpartS liSt 827300/11 en

ENERGYEFFICIENCY

2

conTenTS

1 . . . . . . . . Ground-source Probes and Accessories . . . . . . . . . . . . . . . 3

2 . . . . . . . . Ground-source Collectors and Accessories . . . . . . . . . . . 10

3 . . . . . . . . Energy Piles and Accessories . . . . . . . . . . . . . . . . . . . . . . 12

4 . . . . . . . . RAUGEO Helix® Probes and Accessories . . . . . . . . . . . . . 14

5 . . . . . . . . RAUGEO Coaxial Probes and Accessories . . . . . . . . . . . . 15

6 . . . . . . . . RAUGEO Manifold Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

7 . . . . . . . . RAUGEO Medium Manifold Chambers . . . . . . . . . . . . . . . 17

8 . . . . . . . . RAUGEO Large Manifold Chambers. . . . . . . . . . . . . . . . . . 18

9 . . . . . . . . RAUGEO CLiCk Modular Manifold . . . . . . . . . . . . . . . . . . . 22

10 . . . . . . . RAUGEO Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

11 . . . . . . . REHAU EVERLOCTM Compression Sleeve Technology . . . . 33

12 . . . . . . . REHAU Ball Valves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

3

1 ground-Source proBeS & acceSSorieS

RAUGEO PE-Xa ProbeDouble-U-ProbeMade of cross-linked polyethylene (RAU-Pe-Xa) according toDIn 16892/93, UV-stabilised, natural colour, with a grey protectivelayer of RAU-Pe.- High resistance against notches, grooves and point loads- curved probe tip, therefore no joint in the ground- Additional protection of probe tip with GRP casing- Factory tested with certification- 10 year consequential loss warrantyoperating temperature: -40 °c to +95 °cDelivery form: 1 Double-U-probe/pallet (4 coils)Includes screws for connecting the probe feet of double-u probe

RAUGEO PE-Xa Probe 32 x 2,9Probe tip diameter: 110 mm

Article No. Delivery Length d x s Weight Pipe Volume[m] [mm] [kg] [l]

131693-050* 50 32 x 2,9 58 108135873-060 60 32 x 2,9 70 129135503-070 70 32 x 2,9 80 151135513-080 80 32 x 2,9 91 173135523-090 90 32 x 2,9 102 194135533-100 100 32 x 2,9 114 216135404-110 110 32 x 2,9 125 237135553-125 125 32 x 2,9 141 270140138-130 130 32 x 2,9 147 280135685-140 140 32 x 2,9 158 302131703-150 150 32 x 2,9 169 323* Produced to order

RAUGEO PE-Xa Probe 40 x 3,7Probe tip diameter: 134 mm


140143-050* 50 40 x 3,7 88 167140153-060* 60 40 x 3,7 105 200140163-070* 70 40 x 3,7 122 234140173-080* 80 40 x 3,7 139 267140183-090* 90 40 x 3,7 155 300140193-100* 100 40 x 3,7 172 334140203-110* 110 40 x 3,7 189 367140223-125* 125 40 x 3,7 215 417140753-130* 130 40 x 3,7 215 434140233-150* 150 40 x 3,7 257 501140243-175* 175 40 x 3,7 300 584140253-200* 200 40 x 3,7 343 668140263-225* 225 40 x 3,7 386 751140273-250* 250 40 x 3,7 429 835* Produced to order

4

RAUGEO PE-RC Probes DUODouble-U loop probe made from Pe100-Rc to DIn 8074/75. TÜV certification according to PAS 1075. UV stabilised, colour - black(RAL 9004), SDR 11, factory tested with certification, welded according to DVS guidelines. Produced according to SKZ HR 3.26 probe standard.operating temperatures: -20oc to +40ocMax. operating pressure 16 bar (safety factor 1.25)Delivery form: Double-U probe on a pallet (4 coils)Includes screws for connecting the probe feet of double-u probeRAUGEO PE-RC Probes DUO 32Probe tip diameter: 96 mm

Article No Delivery Length d x s Weight Pipe Volume[m] [mm] [kg] [l]

131296-050 50 32 x 2,9 55 107131306-060 60 32 x 2,9 66 129131316-070 70 32 x 2,9 77 151131326-080 80 32 x 2,9 88 173131336-090 90 32 x 2,9 99 194131346-100 100 32 x 2,9 110 216131356-110 110 32 x 2,9 121 237131606-120 120 32 x 2,9 132 258131376-125 125 32 x 2,9 138 270131386-130 130 32 x 2,9 143 280131396-140 140 32 x 2,9 154 302131406-150 150 32 x 2,9 165 323

RAUGEO PE-RC Probes DUO 40Probe tip diameter: 118 mm


131446-060 60 40x3,7 104 200131456-070 70 40x3,7 121 234131466-080 80 40x3,7 138 267131476-090 90 40x3,7 155 300131486-102 102 40x3,7 176 341131496-127 127 40x3,7 219 424131506-140 140 40x3,7 242 467131516-152 152 40x3,7 262 507131526-165 165 40x3,7 285 551131536-175 175 40x3,7 302 584131546-185 185 40x3,7 319 618131556-200 200 40x3,7 345 668131566-225 225 40x3,7 388 751131576-250 250 40x3,7 431 835131586-275 275 40x3,7 474 918131596-300* 300 40x3,7 517 1.001

5

RAUGEO PE 100 Duo ProbeMade of high density polyethylene (Pe 100) according to DIn8074/75, UV-stabilised, black colour, factory tested with certification, welded according to DVS guidelines- SKZ certification HR 3.26- compact and robust probe tipoperating temperature: -20°c to +40°cMax operating pressure: 16 bar (safety factor 1.25)Delivery form: 1 DUo-probe/ palette (4 coils)Includes screws for connecting the probe feet of double-u probeRAUGEO PE 100 DUO Probe 32Probe tip diameter: 96 mm


136146-050* 50 32 x 2,9 55 107136156-060 60 32 x 2,9 66 129136166-070 70 32 x 2,9 77 151136176-080 80 32 x 2,9 88 173136186-090 90 32 x 2,9 99 194136196-100 100 32 x 2,9 110 216136206-110 110 32 x 2,9 121 237136856-120* 120 32 x 2,9 132 258136226-125 125 32 x 2,9 138 270136236-130* 130 32 x 2,9 143 280136246-140* 140 32 x 2,9 154 302136256-150* 150 32 x 2,9 165 323* Produced to order

RAUGEO PE 100 DUO Probe 40Probe tip diameter: 118 mm


136296-060* 60 40 x 3,7 104 200136306-070* 70 40 x 3,7 121 234136316-080* 80 40 x 3,7 138 267136326-090* 90 40 x 3,7 155 300136336-102 102 40 x 3,7 176 341136346-127* 127 40 x 3,7 219 424136356-140* 140 40 x 3,7 242 467136366-152* 152 40 x 3,7 262 507136376-165* 165 40 x 3,7 285 551136386-175* 175 40 x 3,7 302 584136396-185* 185 40 x 3,7 319 618136406-200* 200 40 x 3,7 345 668136416-225* 225 40 x 3,7 388 751136426-250* 250 40 x 3,7 431 835136436-275* 275 40 x 3,7 474 918136446-300* 300 40 x 3,7 517 1002* Produced to order

6

RAUGEO Backfilling Pipe PE SDR 11For grouting of the borehole.Made of SDR 11 polythyleneUV stabilised, colour: black2m additional pipe versus probe length.

Please note: For short term over pressure loading, the backfillingpipe can only be used for one borehole.

RAUGEO Backfilling Pipe 32 x 2,9

RAUGEO Backfilling Pipe 25 x 2,3


136387-052 52 25 x 2,3 8 17136387-062 62 25 x 2,3 10 20136387-072 72 25 x 2,3 12 24136387-082 82 25 x 2,3 13 27136387-092 92 25 x 2,3 15 30136387-104 104 25 x 2,3 16 34136387-112 112 25 x 2,3 18 37136387-129 129 25 x 2,3 20 42136387-134 134 25 x 2,3 22 44136387-142 142 25 x 2,3 23 46136387-154 154 25 x 2,3 24 50136387-167 167 25 x 2,3 27 55136387-177 177 25 x 2,3 28 58136387-187 187 25 x 2,3 30 61136387-202 202 25 x 2,3 32 66136387-227 227 25 x 2,3 36 74136387-252 252 25 x 2,3 40 82136387-277 277 25 x 2,3 44 91136387-302 302 25 x 2,3 48 99


136399-052 52 32 x 2,9 15 28136399-062 62 32 x 2,9 17 33136399-072 72 32 x 2,9 20 39136399-082 82 32 x 2,9 23 44136399-092 92 32 x 2,9 26 50136399-104 104 32 x 2,9 29 56136399-112 112 32 x 2,9 32 60136399-124 124 32 x 2,9 35 67136399-129 129 32 x 2,9 36 69136399-132 132 32 x 2,9 37 71136399-142 142 32 x 2,9 40 76136399-154 154 32 x 2,9 43 83136399-202 202 32 x 2,9 57 108136399-227 227 32 x 2,9 64 122136399-252 252 32 x 2,9 71 136136399-302 302 32 x 2,9 85 163

7

insertion Aid for RAUGEO PE 100 ProbesUsed as a support rod for inserting probes into a boreholeAdd the insertion aid to the DUo probe with weight connector set 1Material: Steel

Article No. Length Weight Delivery Unit[mm] [kg] [pc]

352420-001 approx. 900 0,75 1

Weight Connector Set 2 for RAUGEO PE UNO Probes For the installation of a probe weight to Pe Uno probe.Material: Steel

Article No. Weight Delivery Unit[kg] [pc]

352440-001 0,3 1

Weight Connector Set 1 for RAUGEO PE DUO ProbesFor the installation of a probe weight (or insertion aid between theprobe pipes) to a Pe Duo probe.Material: Steel

Article No. Application Weight Delivery Unit[kg] [pc]

352430-002 Probe weight or insertion aid 0,2 1351917-002 Short variant only for probe weights 0,2 1

RAUGEO Probe Weights For simple insertion of the probe into the borehole- For a Pe Duo probe, use weight connection set 1- For a Pe Uno probe, use weight connection set 2- For a Pe-Xa probe, use Pe-Xa adapter set- connection of different probe weights with a weight extension setMaterial: Steel

Article No. Length d Weight Delivery Unit[mm] [mm] [kg] [pc]

352400-002 ca. 360 75 12,5 1352410-002 ca. 720 75 25 1

8

Weight Extension Set for RAUGEO PE Probe WeightsFor the modular connection of different probe weights.Material: Steel


352450-001 0,1 1

Article No. Dimension Length Delivery Unit[mm] [mm] [pc]

350499-001 32-32-40 190 2350509-001 40-40-50 210 2

RAUGEO Y-PipeFor connection of both flow and return pipes at the borehole. TheY-pipe is made of Pe 100 SDR 11 according to DIn 8075.To be connected using electrofusion welding.

Article No. Dimension Length Delivery Unit[mm] [mm] [pc]

135433-001 32-32-40 240 2135443-001 40-40-50 270 2

RAUGEO Y Pipe with SocketsFor connection of both flow and return pipes at the borehole. TheY-pipe is made of Pe 100 SDR 11 according to DIn 8075.To be connected using socket welding.

Weight Adapter Set for RAUGEO PE-Xa ProbesFor the installation of a probe weight to a Pe-Xa probe.Material: Steel


351597-002 0,4 1

9

Article No. Type Thermal Cond. Application Spreading Weight Delivery Unit[W/mk] rate [to/m3] [kg/Pallet] [Pallet]

302509-001* RAUGeo fill red 2,0 High Thermal conductivity & frost resistant 1,03 1.000 Pallet

302509-002* RAUGeo fill red 2,0 High Thermal conductivity & frost resistant 1,03 1.000 big bag

302519-001* RAUGeo fill blue 1,2 frost resistant 0,68 1000 Pallet302519-002* RAUGeo fill blue 1,2 frost resistant 0,68 1000 big bag303439-001* RAUGeo fill white 1,0 basic 0,80 1000 Pallet303439-002* RAUGeo fill white 1,0 basic 0,80 1000 big bag*Delivery time on request

RAUGEO Fill backfilling materialPre-mixed backfilling material for grouting vertical borehole installations. Frost resistance in accordance with DIn 52104-A.RAUGEO Fill Red: Thermal conductivity 2,0 W/mK, Suspension density 1,65 kg/dm3, compression resistance 28 d ca. 5,5 n/mm2, Water permeabi-lity < 2x10-10 m/sRAUGEO Fill Blue: Thermal conductivity approx. 1,2 W/mK, Suspension density 1,43 kg/dm3, compression resistance 28 d ca. 4 n/mm2, Water permeability < 1 x 10-9 m/sRAUGEO Fill White: Thermal conductivity approx. 1,0 W/mK, Suspension density 1,43 kg/dm3, compression resistance 28 d ca. 4 n/mm2, Water permeability < 1 x 10-9 m/s

Delivery form: 40 bags of 25kg per pallet

Article No. d x s OD with pipe Middle Opening Delivery Unit[mm] [mm] [mm] [pc]

222859-001 32 x 2,9 117 45 10228429-001 40 x 3,7 134 50 10

RAUGEO SpacerTo ensure a defined space between the prope pipes and also allowspace for the backfilling pipe. This prevents the pipes being in directcontact with one another and therefore causing heat transmission.

10

2 ground-Source collectorS and acceSSorieS

RAUGEO collect PE-Xa SDR 11Made of cross-linked polyethylene (RAU-Pe-Xa) according toDIn 16892/93, UV-stabilised, natural colour, with a grey protectivelayer of RAU-Pe- Resistant to notches and grooves- Does not require sand bed for installationoperating temperature: -40 °c to +95 °c


135233-001 100 20 x 1,9 12 21135243-001 100 25 x 2,3 18 33135253-001 100 32 x 2,9 28 54135763-001 100 40 x 3,7 42 83

RAUGEO collect PE-Xa plus SDR 11With the same properties of RAUGeo collect Pe-Xa but with additionaloxygen barrier according to DIn 4726.operating temperature: -40 °c to +95 °c

RAUGEO collect PE-RC SDR 11Made of polyethylene resistant to crack (Pe100-Rc) according to PAS 1075, UV-stabilised, colour - black.operating temperatures: -20oc to +40oc


135667-100 1 100 20 x 1,9 14 21135697-001 1 100 25 x 2,3 19 33135687-001 1 100 32 x 2,9 31 54135677-001 1 100 40 x 3,7 47 831 Produced to order


136825-100 100 25 x 2,3 18 33136495-100 100 32 x 2,9 28 54136505-100 100 40 x 3,7 42 83

11

RAUGEO collect PE 100 SDR 11Made of Pe-HD according to DIn 8074/75, UV-stabilised, black colour.Please note: Pe non-crosslinked pipes must be installed in a sandbed.operating temperature: -20 °c to +40 °c.


137318-100* 100 25 x 2,3 18 33135495-100* 100 32 x 2,9 28 54135695-100* 100 40 x 3,7 42 83*Delivery times on request

Article No. Length d Delivery Unit[mm] [mm] [pc]

222869-001 200 10 25

RAUGEO collect Laying AidsTo fix the collector pipe in the pipe trench or foundation pit.The laying aid can then be pulled out and reused.

12

3 energy pileS and acceSSorieS

RAUGEO collect PE-Xa Energy PilesMade of cross-linked polyethylene (RAU-Pe-Xa) according toDIn 16892/93, UV-stabilised, natural colour, with a grey protectivelayer of RAU-Pe- Resistant to notches and grooves- Particularly small bending radiusoperating temperature: -40 °c to +95 °c


135233-001 100 20 x 1,9 12 21135243-001 100 25 x 2,3 18 33

RAUGEO collect PE-Xa plus Energy PilesWith the same properties of RAUGeo collect Pe-Xa but with additionaloxygen barrier according to DIn 4726..operating temperature: -40 °c to +95 °c


135667-100 1 100 20 x 1,9 14 21135697-001 1 100 25 x 2,3 19 331 Produced to order

EP Grid TieTo attach the RAUGeo pipework to the energy pilecolour: black

Article No. Weight Box Qty Delivery Unit[kg/100 pc] [pc]

246899-001 0,15 100/5000 100

RAUGEO Ventilation CapFor carrying out pressure tests of ground-source systemsSet contains: - 1 end cap with vent and- 1 end cap without vent

Article No. Pipe Diameter Weight Delivery Unit[mm] [kg]

100764-001* 20 33 1100769-001* 25 55 1100766-001* 32 135 1100767-001* 40 135 1*delivery times on request

13

Twisting ToolAllows fast and comfortable twisting of the eP grid tie.Material: Steelcolour: black

Article No. Weight Box Qty Delivery Unit[kg/pc] [pc]

257304-003 0,44 1 1

REHAU Cable TiesPolyamide cable ties to attach pipework to the pile.colour: natural

REHAU HDPE Casing PipeTo protect the upper area of enrgy pile pipework during installation.corrugated outer layer of Pe-HD, smooth inner layer of Pe-HD. Impact resis-tant up to -25oc. easy handling and installation due to low weight and high flexibility. Simple trimming with no special tools

Article No. Weight Box Qty Delivery Unit[kg/100 pc] [pc]

724448-100 0,14 100 100

Article No. OD iD Delivery form Length Bending radius approx. Weight[mm] [mm] [m] [m at 20 °C] [kg/m]

102801-006* 40 30 coil 50 0,35 0,193102811-006* 50 40 coil 50 0,35 0,255102821-006* 63 50 coil 50 0,46 0,327102831-006* 75 60 coil 50 0,46 0,290102841-006* 90 74 coil 50 0,46 0,545102851-006* 110 93 coil 50 0,46 0,560102861-006* 120 100 coil 50 0,50 0,692102871-006* 125 106 coil 50 0,50 0,728102881-006* 160 136 coil 50 0,65 1,080102891-006* 175 150 coil 50 0,70 1,260* Delivery time on request

14

4 raugeo helix® and acceSSorieS

REHAU Pipe Bend Former 90°For bending the RAUGeo pipe 25 x 2,3Material: Polyamidecolour: black

RAUGEO Helix® Probe PE-XaMade of cross-linked polyethylene (RAU-Pe-Xa) according toDIn 16892/93, UV-stabilised, natural colour (milky white), curved probe tip, pipe spacer grey/magenta.operating temperature -40 °c to +95 °cextendable from 1.1m (transportation / storage) to 3m (installationlength).Diameter approx. 36 cm. Material options:150118-001: 4m return pipe (red), 0,2m flow pipe (blue)150118-003: 4m return pipe (red), 3m flow pipe (blue)150118-005: ReHAU compression sleeve couplers

Article No. Pipe Diameter Weight Packing Qty[d] [kg/pc] [pc]

239193-001 25 0,11 25

Article No. dxs Pipe Length Description Weight Delivery Unit[mm] [m] [kg/pc] [pc/wooden crate]

150118-001* 25 x 2,3 42 4m return (red), 0,2m flow (blue) 8,9 15

150118-003* 25 x 2,3 42 4m return (red), 3m flow (blue 9,4 15

150118-005* 25 x 2,3 42 compression sleeve coupler ends 8,1 15

REHAU Header Pipe blue/red°Made of high pressure cross-linked polyethylene (RAU-Pe-Xa) according to DIn 16892/3, UV stabilised, natural colour with either a blue or red protective layer of RAU-Pe. Used as connecting pipe for RAUGeo Helix ®

- Resistant against notches and grooves - can be laid without a sand bed

operating temperature: -40 °c to +95 °c

Art.-Nr. Pipe Length dxs Weight Pipe Volume Colour[m] [mm] [kg] [l]

938848-100* 100 25 x 2,3 18 33 Blue938838-100* 100 25 x 2,3 18 33 Red

* Produced to order

15

5 raugeo coaxial proBeS & acceSSorieS

RAUGEO Coaxial Probecomplete factory welded coaxial probe, specially designed for energy extrac-tion from radial drilling from a central chamber. - outer pipe SDR 11 dimension 63 x 5.8, made from Pe-Rc according to PAS 1075 with factory welded probe tip.

- Inner pipe SDR 11 dimension 32 x 2.9, made of polyethylene with factory welded probe head for flow and return connections.

Backfilling pipe and grout can be found in Section 1.Manifolds can be found in Section 9.

Article Length Outer Pipe inner Pipe Weight Pipe Volume[m] [mm] [mm] [kg] [l]

160133-001* 30 63x5,8 32x2,9 41 54160143-001* 40 63x5,8 32x2,9 55 72160153-001* 50 63x5,8 32x2,9 68 90*Delivery time on request

REHAU Chamber for Radial Drilling (Coaxial probes)

Chamber Ring Polypropylene DN 1000incl. ladder and seal Dn 1000Material: RAU-PP 2300colour: orange

Chamber ring with base

Concrete Cover plateStandard cover according to DIn 19584, en 124Material: concretecolour: Grey

Plastic covers available on request

Chamber ring with empty base

Article No. Useable Height H Weightheight N [mm] [mm] [kg/pc]

190313-001 125 220 19,7190490-100 250 345 22,0190500-100 500 595 36,0190436-001 750 845 48,0190900-100 1000 1095 65,0

Article No. Useable Height H Weightheight N [mm] [mm] [kg/pc]

190485-001 empty base 475 605 59190495-001 empty base 975 1105 89

Article No. DN Weight[kg/pc]

190217-001 625 715190227-001 800 685

16

6 raugeo manifold Box

RAUGEO Manifold Box*complete pre-fabricated manifold box, made of polyethylene, for connectionsof brine circuits. Pressure tested in factory. Length x width x height: 66 x 46x 50cm. Max. installation depth from top of box: 25cm. 63 x 5.8mm manifoldheader pipe, made of Pe 100. Welded watertight pipe stubs are 32 x 2.9mm,spaced 100mm apart. 1“ ball valve for ventilation. Available without flowmeters, with 1 ¼“ polymer ball valves on every circuit. Available with flowmeters, with 1 ¼“ polymer ball valves on all flow circuits and flowmeters on all return circuits.

RAUGEO Manifold Wall Box*complete pre-fabricated manifold wall box, made of polyethylene, forconnection of brine circuits, e.g. in a lightwell. Pressure tested in factory.Length x width x height: 60 x 46 x 66cm. Max. installation depth from topof box: 25cm. 63 x 5.8mm manifold header pipe, made of Pe 100. Weldedwatertight pipe stubs are 32 x 2.9mm, spaced 100mm apart. 1“ ball valvefor ventilation. Available without flowmeters, with 1 ¼“ polymer ball valves onevery circuit. Available with flowmeters, with 1 ¼“ polymer ball valves on allfl ow circuits and fl owmeters on all return circuits.

Article No Dimension of No. of Flowmeter WeightConnections Connections [kg/pc]

353905-001 32 x 2,9 2 without 15,2353915-001 32 x 2,9 3 without 17,3 353925-001 32 x 2,9 4 without 19,4 353935-001 32 x 2,9 5 without 21,5 353945-001 32 x 2,9 2 with 15,8 353955-001 32 x 2,9 3 with 18,2 353965-001 32 x 2,9 4 with 20,6 353975-001 32 x 2,9 5 with 23,0 * Delivery time on request

Article No. Dimensions of No.of Flowmeter WeightConnections Connections [kg/pc]

353985-001 32 x 2,9 2 without 16,2 353995-001 32 x 2,9 3 without 18,3 354005-001 32 x 2,9 4 without 20,4 354015-001 32 x 2,9 5 without 22,5 354025-001 32 x 2,9 2 with 16,8 354035-001 32 x 2,9 3 with 19,2 354045-001 32 x 2,9 4 with 21,6 354055-001 32 x 2,9 5 with 24,0 * Delivery time on request

17

7 raugeo medium manifold chamBerS

RAUGEO Medium Manifold Chambercomplete pre-fabricated manifold chamber, made of polyethylene, for connection of brine circuits. Pressure tested in factory. Walkable cover up to 200kg.Length x width x height: 100 x 80 x 115cm. 63 x 5.8mm manifold headerpipe, made of Pe 100. Welded watertight pipe stubs are 32 x 2.9mm or 40 x3.7mm, spaced 100mm apart. 1“ ball valve for ventilation. Available withoutflowmeters, with 1 ¼“ polymer ball valves on every circuit. Available withflowmeters, with 1 ¼“ polymer ball valves on all flow circuits and flowmeters on all return circuits.

RAUGEO Medium Manifold Chamber without Flowmeter*

Article No Dimensions of No. of Flowmeter WeightConnections Connections [kg/pc]

354385-001 32 x 2,9 2 without 50,2 354395-001 32 x 2,9 3 without 52,3 354405-001 32 x 2,9 4 without 53,4 354415-001 32 x 2,9 5 without 55.5 354425-001 32 x 2,9 6 without 57,6 354435-001 32 x 2,9 7 without 59,8 354445-001 32 x 2,9 8 without 61,9 354465-001 40 x 3,7 2 without 50,5 354475-001 40 x 3,7 3 without 52,6 354485-001 40 x 3,7 4 without 53,7 354495-001 40 x 3,7 5 without 55,8 354505-001 40 x 3,7 6 without 57,9 354515-001 40 x 3,7 7 without 60,1 354525-001 40 x 3,7 8 without 62,2 * Delivery time on request

Article No Dimensions of No. of Flowmeter WeightConnections Connections [kg/pc]

354145-001 32 x 2,9 2 with 50,8 354155-001 32 x 2,9 3 with 52,9 354165-001 32 x 2,9 4 with 54,0 354175-001 32 x 2,9 5 with 56,1 354185-001 32 x 2,9 6 with 58,2 354195-001 32 x 2,9 7 with 60,4 354205-001 32 x 2,9 8 with 62,5 354225-001 40 x 3,7 2 with 51,1 354235-001 40 x 3,7 3 with 53,2 354245-001 40 x 3,7 4 with 54,3 354255-001 40 x 3,7 5 with 56,4 354265-001 40 x 3,7 6 with 58,5 354275-001 40 x 3,7 7 with 60,7 354285-001 40 x 3,7 8 with 62,8 * Delivery time on request

Article No Description Weight (kg/pc)355125-001 concrete ring for Buoyancy 145355145-001 chamber Shaft extension 600 x 400 x 6 (d x h x s) 7

RAUGEO Medium Manifold Chamber with Flowmeter*

RAUGEO Medium Manifold Chamber Accessories

18

8 raugeo large manifold chamBerS

Article No. Weight Delivery Unit[kg/pc] [pc]

305715-001 64 1

The combination of the RAUGEO large manifold chamber with the RAUGEO CLiCk manifold system provides unprecedented flexibility. With only a small number of articles any manifold chamber can be assem-bled quickly and easily.

Parts list for RAUGEO manifold chamber modular systema) in combination with pre-fabricated RAUGEO CLiCk manifolds

No. of connections Empty Chamber Brine circuit Header pipe RAUGEO CLiCk RAUGEO CLiCkseal set seal set manifold push fitting set

2-10 1 1 per circuit/port 1 1 1 per circuit/port11-20 1 1 per circuit/port 2 2 1 per circuit/port

No. of connections Empty Brine circuit Header pipe RAUGEO CLiCk RAUGEO CLiCk RAUGEO CLiCkChamber seal set seal set Basis-Set Extension set push fitting set

2-10 1 1 per circuit/port 1 1 1 per circuit/port minus 1 1 per circuit/port11-20 1 1 per circuit/port 2 2 1 per circuit/port minus 1 1 per circuit/port

See chapter 9 RAUGeo cLIcK manifold for further details

b) in combination with the RAUGEO CLiCk modular system

RAUGEO large manifold chamber - Empty chamber2-piece ground-source manifold chamber made from polyethylene (orange) to hold a RAUGeo cLIcK manifold consisting of - Base element with carrying handles on both sides and eye hooks for - easy transport and handling - chamber cone, can be screwed to the base element so that it is watertight - chamber cover to ISo 15398 / DIn 1989 (MPA + TÜV tested) consisting of cover, frame and seal, can be walked on up to 200kg, childproof and surface water resistant due to inlaid seal and 4-way screw connection

Dimensions installation size: L 1300 x W 980 x H 1340Dimensions delivery format: L 1300 x W 980 x H 660 (cone turned upside down in the base element) Additionally includes: - Screw material for the watertight connection of the base element and cone - Sealing tape for sealing between the base element and cone - Adjustment for the manifold mounting support

RAUGEO Large Manifold Chamber System available from August 2013

19

Article No. For Weight Delivery Unitpipe dimension [kg/Set] [Set]

305716-001 d20 0,1 1305718-001 d25 0,1 1305719-001 d32 0,2 1305723-001 d40 0,2 1305724-001 d50 0,2 1

Article No. For Weight Delivery Unitpipe dimension [kg/Set] [Set]

305724-001 d50 0,2 1305725-001 d63 0,2 1311966-001 d75 0,3 1

RAUGEO Pipe Duct SetSet consisting of 2 ducts for feeding the brine circuits through to the inside of the chamber of the RAUGeo large manifold chamber

RAUGEO Header Pipe Duct Set Set consisting of 2 ducts for feeding the header pipes through to theinside of the chamber of the RAUGeo large manifold chamber

RAUGEO LubricantLubricant for use on all connections of the RAUGeo cLIcK large manifold and manifold chamber.


305709-001 0,1 1

RAUGEO Sealing StripReplacement for the seal between the chamber cone and base element.


311982-001 0,1 1

RAUGEO Levelling SetSet consisting of 2 levels made from Pe each for an additional support point for each compression sleeve manifold in the chamber base.


314001-001 0,9 1

RAUGEO Screw SetSpare parts set consisting of 5 screws for connecting the chamber cone to the base element.Article No. Weight Delivery Unit

[kg/pc] [pc]314000-001 0,2 1

20

RAUGEO Large Manifold Chamber - Pre-fabricated DesignPre-assembled ground-source manifold chamber made from polyethylene (orange) to join the brine circuits, consisting of - RAUGeo XL manifold chamber empty chamber with pre-drilled ducts for the brine circuits and header pipes in the required amount and dimension with seals fitted in each case

- Pre-fabricated and pressure-tested RAUGeo cLIcK (flow and - return) in the appropriate size required - RAUGeo cLIcK connection sets in the required number and - dimension

Dimensions installation size and delivery format: L 1300 x W 980 x H 1300Also includes: - Screw material for the watertight connection of the base element and cone - Sealing tape for sealing between the base element and cone - Adjustment for the manifold mounting support

Article No. No. of Flow rate Manifold- Weight Delivery Unitconnections [l/min] combination [kg/pc] [pc]

305398-002 2 10-30 1 x 2-port 71,3 1305399-003 3 10-30 1 x 3-port 72,8 1305403-004 4 10-30 1 x 4-port 74,1 1305404-005 5 10-30 1 x 5-port 75,4 1305405-006 6 10-30 1 x 6-port 77,1 1305406-007 7 10-30 1 x 7-port 78,4 1305407-008 8 10-30 1 x 8-port 79,8 1305408-009 9 10-30 1 x 9-port 81,1 1305793-010 10 10-30 2 x 5-port 82,4 1305409-010 10 10-30 1 x 10-port 85,6 1305413-011 11 10-30 1 x 5 port + 1 x 6-port 89,9 1305414-012 12 10-30 2 x 6-port 91,6 1305415-013 13 10-30 1 x 6-port + 1 x 7-port 93,0 1305416-014 14 10-30 2 x 7-port 94,3 1305417-015 15 10-30 1 x 7-port + 1 x 8-port 95,6 1305418-016 16 10-30 2 x 8-port 96,9 1305419-017 17 10-30 1 x 8-port + 1 x 9-port 98,2 1305423-018 18 10-30 2 x 9-port 99,6 1305424-019 19 10-30 1 x 9-port + 1 x 10-port 101,5 1305425-020 20 10-30 2 x 10-port 102,8 1* Delivery times on request

Pipe dimension 20 x 1,9, flowmeter range 10-30 l/min*

Article No. No. of Flow rate Manifold Weight Delivery Unitconnections [l/min] combination [kg/pc] [pc]

305454-002 2 10-30 1 x 2-port 71,4 1305455-003 3 10-30 1 x 3-port 72,9 1305456-004 4 10-30 1 x 4-port 74,2 1305457-005 5 10-30 1 x 5-port 75,6 1305458-006 6 10-30 1 x 6-port 77,3 1305459-007 7 10-30 1 x 7-port 78,7 1305463-008 8 10-30 1 x 8-port 80,0 1305464-009 9 10-30 1 x 9-port 81,4 1305796-010 10 10-30 2 x 5-port 85,9 1305465-010 10 10-30 1 x 10-port 82,7 1305466-011 11 10-30 1 x 5 port + 1 x 6-port 90,3 1305467-012 12 10-30 2 x 6-port 92,0 1305468-013 13 10-30 1 x 6-port + 1 x 7-port 93,4 1305469-014 14 10-30 2 x 7-port 94,7 1305473-015 15 10-30 1 x 7-port + 1 x 8-port 96,1 1305474-016 16 10-30 2 x 8-port 97,4 1305475-017 17 10-30 1 x 8-port + 1 x 9-port 98,8 1305476-018 18 10-30 2 x 9-port 100,1 1305477-019 19 10-30 1 x 9-port + 1 x 10-fach 102,1 1305478-020 20 10-30 2 x 10-port 103,4 1* Delivery times on request

Pipe dimension 25 x 2,3 flowmeter range 10-30 l/min*

21

Article No. No. of Flow rate Manifold Weight Delivery Unitconnections [l/min] combination [kg/pc] [pc]



Article No. No. of Flow rate- Manifold Weight Delivery Unitconnections [l/min] combination [kg/pc] [pc]



22

9 raugeo clicK manifold

RAUGEO CLiCk manifoldPre-fabricated and pressure-tested modular manifold (flow and return) madefrom glass fibre-reinforced, heat and cold-resistant polymer with a high levelof insulation (heat conductivity 0.30 W/mK).Internal diameter of the compression sleeve manifold 2½“(64mm).

every flow module with integrated shut-off device (ball valve ID 25). everyreturn module with integrated shut-off device (ball valve ID 25) and polymerflowmeter (ID 25).every connecting module with 2“ (50 mm) dezincification-resistant (eZB)male thread for connecting the header pipe as well as 3 x ½“ (12 mm) lateralconnections with female thread for fitting extras.Manifold outlets with bayonet connection for RAUGeo cLIcKpush fitting for connecting the brine circuits.

Approved to max. test pressure 10 bar, max. operating pressure 6 bar.

Also includes: 6 dummy stoppers (pre-assembled), 2 x filling and drainingvalves ½“ (12 mm), 2 x bleed valve ½“ (12 mm), wall bracket set for therequired number of fixing points..Pre-assembled manifold with flowmeter 10–30 Litres/min

Article No. No. of Flow rate Manifold Length Weight Delivery Unitconnections [Litres/min] [mm] [kg] [pc]

304213-001 2 10–30 327 5,3 1304223-001 3 10–30 419 6,5 1304233-001 4 10–30 511 7,6 1304243-001 5 10–30 603 8,7 1304253-001 6 10–30 695 9,8 1304263-001 7 10–30 787 10,9 1304273-001 8 10–30 879 12,0 1304283-001 9 10–30 971 13,1 1304293-001 10 10–30 1.063 14,2 1304303-001 11 10–30 1.155 15,3 1304313-001 12 10–30 1.247 16,5 1

Pre-assembled manifold with flowmeter 5–15 Litres/mineArticle No. No. of Flow rate Manifold Length Weight Delivery Unit

connections [Litres/min] [mm] [kg]314301-001 2 5–15 327 5,3 1314311-001 3 5–15 419 6,5 1314321-001 4 5–15 511 7,6 1314331-001 5 5–15 603 8,7 1314341-001 6 5–15 695 9,8 1314351-001 7 5–15 787 10,9 1314361-001 8 5–15 879 12,0 1314371-001 9 5–15 971 13,1 1314381-001 10 5–15 1.063 14,2 1314391-001 11 5–15 1.155 15,3 1314401-001 12 5–15 1.247 16,5 1

22

23

RAUGEO CLiCk Manifold – Modular System

The modular system for manifold assembly consists essentially of three sets: the basic set that is required for every manifold, an expansion set toadd an additional brine circuit to each manifold, as well as a push fitting set to connect the brine circuits. in combination with the other sets, e.g.additional wall brackets or ball valves to connect the main pipes, you can fit any manifold variant you like yourself within a short time.This allows, even with low stock, the highest flexibility for each construction site requirement. You can therefore fit any manifold variant you likeyourself within a short time.

parts list for raugeo clicK modular system for a flow rate of 10-30 l/min (e.g. for ground-source probes)

Mod

ular

Sys

tem

No. of Basic-Set Expansion- Wall Bracket- Push Fitting-Set in Dimension...circuits Set Set d20 d25 d32 d40 d50Art.-Nr. 304228-001 304234-001 304238-001 304226-001 304236-001 304246-001 304256-001 304266-001

2 circuits 1 1 0 2 2 2 2 23 circuits 1 2 0 3 3 3 3 34 circuits 1 3 0 4 4 4 4 45 circuits 1 4 0 5 5 5 5 56 circuits 1 5 1 6 6 6 6 67 circuits 1 6 1 7 7 7 7 78 circuits 1 7 1 8 8 8 8 89 circuits 1 8 1 9 9 9 9 910 circuits 1 9 1 10 10 10 10 1011 circuits 1 10 1 11 11 11 11 1112 circuits 1 11 2 12 12 12 12 12

Acce

ssor

ies

No. of Ball Valve-Set Adapter Set for connecting the main pipe in Dimension… Manometer Reducing circuits d40 d50 d63 d75 axial radial fittingArt.-Nr. 209896-001 209890-001 209891-001 209892-001 209893-001 353774-001 304968-001 354752-001

Qty per 1 1 1 1 1 2 2 2manifold Articles can only be assembled in combination! Articles can only be assembled in combination!

Parts list for RAUGeo cLIcK modular system for a flow rate of 5-15 l/min (e.g. for ground-source collectors and Helix®)

Mod

ular

Sys

tem

No. of Basic-Set Expansion Wall Bracket Push Fitting Set in Dimension...circuits Set Set d20 d25 d32 d40 d50Art.-Nr. 304218-001 304224-001 304238-001 304226-001 304236-001 304246-001 304256-001 304266-001

2 circuits 1 1 0 2 2 2 2 23 circuits 1 2 0 3 3 3 3 34 circuits 1 3 0 4 4 4 4 45 circuits 1 4 0 5 5 5 5 56 circuits 1 5 1 6 6 6 6 67 circuits 1 6 1 7 7 7 7 78 circuits 1 7 1 8 8 8 8 89 circuits 1 8 1 9 9 9 9 910 circuits 1 9 1 10 10 10 10 1011 circuits 1 10 1 11 11 11 11 1112 circuits 1 11 2 12 12 12 12 12

Acce

ssor

ies

No. of Ball Valve Set Adapter Set for connecting the main pipe in Dimension… Manometer Reducingcircuits d40 d50 d63 d75 axial radial fittingArt.-Nr. 209896-001 209890-001 209891-001 209892-001 209893-001 353774-001 304968-001 354752-001

Qty per 1 1 1 1 1 2 2 2manifold Articles can only be assembled in combination! Articles can only be assembled in combination!

23

24

RAUGEO CLiCk Basic SetBasic set for the assembly on the construction site of a modular manifoldmade from glass fibre-reinforced, heat and cold-resistant polymer with a highlevel of insulation (heat conductivity 0.30 W/mK), internal diameter of thecompression sleeve manifold 2½“ (64 mm).

comprising 2 connecting and 2 end modules (for the flow and return respec-tively). every connecting module with 2“ (50 mm) dezincification-resistant (eZB) male thread for connecting the header pipe as well as 3 x ½“ (12 mm) lateral connections with female thread for fitting extras.end module (flow) with integrated shut-off device (ball valve ID 25). end module (return) with integrated shut-off device (ball valve ID 25) and polymer flowmeter (ID 25).Manifold outlets with bayonet connection for RAUGeo cLIcKpush fitting for connecting the brine circuits.Approved to max. test pressure 10 bar, max.operating pressure 6 barAlso includes: 2 dummy stoppers, 2 × filling and draining valves ½“ (12 mm),2 × bleed valve ½“ (12 mm), 1 × wall bracket for 2 fixing points.

RAUGEO CLiCk Expansion Setexpansion set for 1 brine circuit for the assembly on the construction site ofa modular manifold made from glass fibre-reinforced, heat and cold-resistantpolymer with a high level of insulation (heat conductivity 0.30 W/mK), internaldiameter of the compression sleeve manifold 2½“ (64 mm).

comprising 2 modules (flow and return) for connecting 1 brine circuit. Flowmodule with integrated shut-off device (ball valve ID 25). Return module withintegrated shut-off device (ball valve ID 25) and polymer flowmeter (ID 25).Manifold outlets with bayonet connection for RAUGeo cLIcKpush fitting for connecting the brine circuit.

Approved to max. test pressure 10 bar, max. operating pressure6 bar.

Article No. Flow rate Weight Delivery Unit Packaging Unit[Litres/min] [kg/Set] [Set] [Sets/box]

304228-001 10–30 4,2 1 10304218-001 5–15 4,2 1 10

Article No. Flow rate Weight Delivery Unit Packaging Unit[Litres/min] [kg/Set] [Set] [Sets/box]

304234-001 10–30 1,1 1 10304224-001 5–15 1,1 1 10

24

25

RAUGEO CLiCk Push Fitting SetPush fitting set for RAUGeo cLIcK manifold for the connection of 1 brine circuit.comprising 2 polymer transparent push connections with insertion depthmark for Pe and Pe-X pipes.

RAUGEO CLiCk Tool SetTool set for removing plastic pipes from RAUGeo cLIcK push fittingsSupply: 1 Tool Set per dimension

RAUGEO CLiCk Push Fitting Set

Article No. Pipe Dimension Weight Delivery Unit Packaging Unit[kg/Set] [Set] [Sets/karton]

304226-001 d20 0,12 1 50304236-001 d25 0,15 1 50304246-001 d32 0,16 1 50304256-001 d40 0,20 1 50304266-001 d50 0,25 1 50

Article No. Pipe Dimension Weight Delivery Unit[kg/Set] [Set]

304988-001 d20 0,02 1304989-001 d25 0,04 1304993-001 d32 0,05 1304994-001 d40 0,07 1304995-001 d50 0,10 1

26

RAUGEO Pipe TrimmerUniversal tool for trimming Pe and PeX pipes of the dimensions d20-d50before fitting the pipe in RAUGeo cLIcK push fittings.


209895-001 0,4 1

RAUGEO CLiCk Thermomanometercombination of thermometer and manometer for measuring the temperatureand pressure in the flow and return of a RAUGeo cLIcK manifold with rear orlateral connection.Measurement range 0–6 bar and −20°c to +60°c. Scope of supply includes½“ (12 mm) Service Automatic valve.The reducing fitting R ⅜“ × Rp ½“ is required to fit the manifold.

Article No. Connection Weight Delivery Unit[kg/pc] [pc]

353774-001 Rear connection (axial) 0,13 1304968-001 Lateral connection (radial) 0,13 1354752-001 Reducing fitting 0,05 1

RAUGEO CLiCk Wall Bracket SetPolymer wall bracket for the offset assembly of a RAUGeo cLIcK manifold(flow and return) for 2 fixing points.Scope of supply: 2 wall brackets for the flow and returnrespectively. Fixing materials (screws and dowels) included.

Article No. Weight/Set Delivery Unit Packaging UNit[kg] [Set] [Sets/box]

304238-001 0,4 1 10

26

27

RAUGEO CLiCk Metal Ball Valve SetSet consisting of 2 ball valves with 2“ connection threads for shutting off theheader pipes from the manifold.Material: Brass nickel-platedSupply: 2 Ball Valves per Set

Article No. Weight Delivery Unit[kg/Set] [Set]

209896-001 2,6 1

RAUGEO CLiCk Adapter Set for Metal Ball Valve SetAdapter set for connecting the header pipes to the RAUGeo cLIcK manifoldMaterial: Dezincification-resistant brassSupply: 2 adapters per set

RAUGEO LubricantLubricant for use with all connections of RAUGeo cLIcK manifolds and large manifold chambers.

Article No. For connecting the pipe Weight Delivery Unitdimension [kg/Set] [Set]

209890-001 d40 1,5 1209891-001 d50 1,7 1209892-001 d63 1,9 1209893-001 d75 3,4 1


305709-001 0,1 1

27

28

RAUGEO EthyleneglycolFor use as a heat-transfer medium.Water Risk Level 1 1 (WGK1).The concentrate is to be mixed according to the table below.

Frost Protection Ethyleneglycol water-10 °c 22 % 78 %-15 °c 29 % 71 %-20 °c 35 % 65 %

Article No. Weight Delivery Unit[kg/pc] [l]

222879-001 12 10222889-001 34 30350479-001 68 60350489-001 230 200

RAUGEO Anti-freeze testerFor measuring the frost protection level of the ethyleneglycol-watermix.

RAUGEO PE-Xa Header Pipes SDR 11Made of high pressure cross-linked polyethylene (Pe-Xa), according to DIn16892/93. UV stabilised. colour - natural with a grey protective layer of RAU-Pe.Delivered in coils.- Resistant to notches and grooves- no sand bed needed for installationsoperating temperatures: -40oc to +95oc

Article No. Weight Make-up Delivery Unit[kg/pc] [pc] [pc]

222919-001 0,2 1 1

Article No. d x s Delivery Unit Weight[mm] [m] [kg/m]

135233-001 20 x 1,9 100 0,12135243-001 25 x 2,3 100 3,16135253-001 32 x 2,9 100 4,47135763-030 40 x 3,7 30 0,42135763-050 40 x 3,7 50 0,42135763-001 40 x 3,7 100 0,42136407-030 50 x 4,6 30 0,67136407-050 50 x 4,6 50 0,67136407-100 50 x 4,6 100 0,67136417-030 63 x 5,8 30 1,06136417-050 63 x 5,8 50 1,06136417-100 63 x 5,8 100 1,06136427-030* 75 x 6,8 30 1,48136427-050* 75 x 6,8 50 1,48136427-100* 75 x 6,8 100 1,48*Delivery time on request

10 raugeo acceSSSorieS

28

29

RAUGEO PE-RC Header Pipes SDR 11Made of polyethylene resistant to crack (Pe100-Rc) to PAS 1075. UV stabi-lised.colour - black. Delivered in coils.operating temperatures: -20oc to +40oc

RAUGEO PE100 Header Pipes SDR 11Made of polyethylene according to DIn 8074/75. UV stabilised.colour - black. Delivered in coils.note: non-crosslinked Pe must be installed in sand beds!operating temperatures: -20oc to +40oc

Article No. d x s Delivery Length Weight[mm] [m] [kg/m]

136825-100 25 x 2,3 100 0,18136495-100 32 x 2,9 100 0,28136505-030 40 x 3,7 30 0,42136505-050 40 x 3,7 50 0,42136505-100 40 x 3,7 100 0,42136835-030 50 x 4,6 30 0,67136835-050 50 x 4,6 50 0,67136835-100 50 x 4,6 100 0,67136855-030 63 x 5,8 30 1,06136855-050 63 x 5,8 50 1,06136855-100 63 x 5,8 100 1,06136865-030* 75 x 6,8 30 1,48136865-050* 75 x 6,8 50 1,48

Article No. d x s Delivery Length Weight[mm] [m] [kg/m]

137318-100 25 x 2,3 100 0,18135495-100 32 x 2,9 100 0,28135695-030 40 x 3,7 30 0,42135695-050 40 x 3,7 50 0,42135695-100 40 x 3,7 100 0,42136388-030 50 x 4,6 30 0,67136388-050 50 x 4,6 50 0,67136388-100 50 x 4,6 100 0,67136458-030 63 x 5,8 30 1,06136458-050 63 x 5,8 50 1,06136458-100 63 x 5,8 100 1,06136468-030* 75 x 6,8 30 1,48136468-050* 75 x 6,8 50 1,48

29

30

RAUGEO PVC Feeder PipeFor wall entry of RAUGeo pipe for direct concreting in to the building.Seal against water and gas penetration.Rough outer surface.

Article No iD OD Length Weight Delivery Unit[mm] [mm] [mm] [kg/pc] [kg/pc]

222864-001 100 106 400 0,81 1222774-001 125 131 600 1,19 1

RAUGEO Pipe Sleeve CapFor PVc sleeve pipe (inner-lying)can be used for other feeder pipes.

Application:With it one can precisely attach the feeder pipes onto the woodenboarding and thus they can be set in concrete at the same time.

Article No. Fits to Feeder Pipe Weight Delivery UnitiD [kg/pc] [pc]

222874-001 100 0,035 1222814-001 125 0,067 1

RAUGEO Core Hole Conservation kitThe kit consists of two component epoxy resin with drinking water.With the approval of the KTW recommendation for the sealing ofconcrete and masonry.Set also contains a brush (length approx. 40cm) and a pair of latexgloves.Assembly instructions come with the set.

Article No. Contents/Can Delivery Unit[kg] [pc]

222854-001 1,1 1

RAUGEO Wall Seal SetTo protect against high-pressure waterTo seal from RAUGeo pipes, which are fed through walls, foundations,ceilings etc.Application in sleeves or in the core drilled hole. Pressure made discout of stainless steel/V2A (1.4301), clamp screws, u-discs and nutsmade of stainless steel V2A.Gas and high-pressure water resistant according to DIn 1988,18336/37, DIn 18195, DVGW G 459/l and VP 601Wrench Size: 10 mmWidth: 40 mm

Article No. Medium Pipe OD* Diameter of Core Tolerance Torque Weight[mm] [mm] [N] [kg/pc]

285561-001 20-28 100 98/103 5 0,60285571-001 32-40 100 98/103 5 0,59285581-001 50 100 98/103 5 0,50285591-001 63 100 98/103 5 0,51285491-001 75 125 123/127 5 0,69* larger diameters available on request

30

31

RAUGEO Warning StripTo mark RAUGeo pipes.Display the strip around 40cm above the pipes. Made of Pe film withlettering “Achtung Soleleitung“.colour: Green

Article No. Length Width Delivery Unit[m] [mm] [pc]

222929-001 250 40 1

RAUGEO Protective TapeFor the protection of RAUGeo brass fittings in the ground.

Article No. Length Width Delivery Unit[m] [mm] [pc]

223449-001 5 50 1

insulation SleeveTo insulate pipe connections in the ground according to DIn 4140Insulation thickness: 13-15 mmIn 2m lengths

Article No. iD s Weight Delivery Unit[mm] [mm] [kg/m] [m]

222939-001 1 20 13 0,07 98222949-001 1 25 13 0,07 80222959-001 32 13,5 0,10 58222969-001 40 14,5 0,11 48222979-001 50 14,5 0,16 34222989-001 63 15 0,19 30

1 Available on request

REHAU PlugFor sealing of probes and collections, e.g. during borehole filling.Pressure tight to 0,5 barMaterial: RAU-PoMcolour: Grey

Article No. Pipe Diameter Weight[mm] [g]

285587-001* 25 30239244-001* 32 35239224-001* 40 40239234-001* 50 60*Delivery times on request

31

32

Pipe Holder for insulation Sleeveconsists of 2 jackets for insulation between pipe and pipe jacket, toprevent condensation in the pipe jacket area.

insulating TapeFor retrospective insulation, e.g. manifoldsSelf-adhesive, flame-retardantoperating temperature: -50oc to +85 ºc

Article No. iD s Weight Delivery Unit[mm] [mm] [kg/pc] [pc]

222999-001 1 20 13 0,02 32223379-001 1 25 13 0,02 32223389-001 32 13,5 0,03 28223399-001 40 14,5 0,04 28223409-001 50 14,5 0,05 28223419-001 63 15 0,07 241 Available on request

Article No. Length Width Thickness Weight Delivery Unit[m] [mm] [mm] [kg] [pc]

301729-001 15 50 3 0,3 1

Glue

To glue cut pieces of insulation


223429-001 1 0,23 11 Available on request

32

33

For RAUGEO Probes, Collect, Helix and Energy pileswuth PE-Xa and PE-Xa plus

Brass fittings installed in the soil must be wrapped with shrink tape. All articles from this chapter are available in larger dimensions on request.

REHAU EVERLOCTM Compression Sleeve, SDR 11For sliding on ReHAU eVeRLocTM compression sleeve fitting SDR 11 in con-junction with RAUGeo pipes SDR 11.Material: cuZn39Pb3

Article No. Dimension a b Weight Pack contents Delivery Unit[mm] [mm] [mm] [kg/pc] [pc] [pc]

139562-001 20 x 1,9 20 25 0,022 100 100139572-001 25 x 2,3 27 30 0,040 50 50139492-001 32 x 2,9 35 40 0,080 50 50138683-001 40 x 3,7 37 49 0,131 25 25138693-001 50 x 4,6 44 61 0,260 25 25138703-001 63 x 5,8 53 74 0,390 25 25

REHAU Straight Coupler, SDR 11ReHAU eVeRLocTM compression fitting with moulded support ridges for use with RAUGeo pipes SDR 11 and ReHAU eVeRLocTM compression sleeves SDR 11.

Article No. Size a z Weight Box Qty Delivery Unit[mm] [mm] [mm] [kg/pc] [pc] [pc]

169008-001 20 x 1,9 53 23 0,062 50 10169010-001 25 x 2,3 67 24 0,093 50 10169013-001 32 x 2,9 80 26 0,180 30 3169015-001 40 x 3,7 90 28 0,380 25 5169144-001 50 x 4,6 104 28 0,570 1 1169142-001 63 x 5,8 122 35 0,940 1 1

REHAU Reduced Coupler, SDR 11ReHAU eVeRLocTM compression fitting with moulded support ridges for use with RAUGeo pipes SDR 11 and ReHAU eVeRLocTM compression sleeves SDR 11.Material: Brass

Article No. Size a z Weight Box qty Delivery Unit[mm] [mm] [mm] [kg/pc] [pc] [pc]

169012-001 25 x 2,3 - 20 x 1,9 61 24 0,070 50 10169014-001 32 x 2,9 - 25 x 2,3 74 25 0,140 30 3169017-001 40 x 3,7 - 32 x 2,9 87 28 0,260 25 5169016-001 40 x 3,7 - 20 x 1,9 83 36 0,280 25 5169147-001 50 x 4,6 - 40 x 3,7 99 28 0,480 1 1169148-001 63 x 5,8 - 50 x 4,6 117 32 0,760 1 1

a

z

11 raugeo compreSSion Sleeve technology

33

34

REHAU T-piece, SDR 11ReHAU eVeRLocTM compression fitting with moulded support ridges for use with RAUGeo Pipe SDR 11 and ReHAU eVeRLocTM compression sleeves SDR 11.

Article No. Size Dimension mm Weight Box Qty Deliverya b c z1 z2 z3 kg/pc. Unit

Equal Tee169045-001 20 x 1,9 40 43 40 25 28 25 0,135 50. 10.169056-001 25 x 2,3 50 54 50 29 32 29 0,200 50. 10.169063-001 32 x 2,9 59 64 59 32 37 32 0,400 30. 3.169072-001 40 x 3,7 67 77 67 43 53 43 0,770 25. 1.169156-001 50 x 4,6 88 87 88 49 48 49 0,870 25. 1.169167-001 63 x 5,8 105 108 105 59 62 59 2,350 25. 1.Tee one end and branch reduced169049-001 25 - 20 - 20 47 46 41 26 31 26 0,165 50. 10.169060-001 32 - 25 - 25 56 58 50 29 36 29 0,280 30. 3.169070-001 40 - 32 - 32 69 67 63 37 40 36 0,580 1. 1.169151-001 50 - 25 - 40 82 69 74 43 47 42 0,820 1. 1.169153-001 50 - 32 - 40 72 75 73 33 48 41 0,720 1. 1.169160-001 63 - 32 - 50 98 82 88 52 53 49 1,200 1. 1.169162-001 63 - 40 - 40 98 87 81 52 55 49 1,400 1. 1.169163-001 63 - 40 - 50 97 87 89 51 55 50 1,600 1. 1.169165-001 63 - 50 - 50 97 94 89 51 55 50 1,600 1. 1.Tee branch reduced169053-001 25 - 20 - 25 48 47 48 26 32 26 0,184 50. 10.169059-001 32 - 20 - 32 54 51 54 27 36 27 0,290 30. 5.169061-001 32 - 25 - 32 57 58 57 30 36 30 0,310 30. 3.169068-001 40 - 20 - 40 62 57 62 30 42 30 0,580 1. 1.169069-001 40 - 25 - 40 67 66 67 43 44 43 0,670 1. 1.169071-001 40 - 32 - 40 67 72 67 43 45 43 0,700 1. 1.169077-001 50 - 20 - 50 69 62 69 30 47 30 0,810 1. 1.169152-001 50 - 25 - 50 73 69 73 34 47 34 0,830 1. 1.169154-001 50 - 32 - 50 72 75 80 33 48 41 0,820 1. 1.169155-001 50 - 40 - 50 81 80 81 42 48 42 0,900 1. 1.169159-001 63 - 25 - 63 83 79 83 37 57 37 1,200 1. 1.169161-001 63 - 32 - 63 87 85 87 41 58 41 1,200 1. 1.169164-001 63 - 40 - 63 92 90 92 46 58 46 1,700 1. 1.169166-001 63 - 50 - 63 98 97 98 52 58 52 1,900 1. 1.

Abgang erweitert169047-001 20 - 25 - 20 43 50 43 28 28 28 0,167 50. 10.

Tee one end reduced137533-001 25 - 25 - 20 50 54 43 29 32 28 0,196 50. 10.169062-001 32 - 32 - 25 59 64 53 32 37 32 0,350 30. 3.

34

35

REHAU T-Piece, Branch with Female Thread SDR 11ReHAU eVeRLocTM compression fitting with moulded support ridges for use with RAUGeo pipes SDR 11 and ReHAU eVeRLocTM compression sleeves SDR 11.

REHAU Male Adapter with Male Thread, SDR 11ReHAU eVeRLocTM compression sleeve with moulded support ridges for use with RAUGeo pipes SDR 11 and ReHAU eVeRLocTM compression sleeves SDR 11.

Article No. Size Dimensions mm Weight Box Qty Delivery a b c z1 z3 kg/pc. Unit

Female Thread169048-001 20 - Rp 1/2“ - 20 45 25 45 30 30 0,151 50 10.169057-001 25 - Rp 1/2“ - 25 56 26 56 35 35 0,215 50 10.169058-001 25 - Rp 3/4“ - 25 56 28 56 35 35 0,225 50 10.169064-001 32 - Rp 1/2“ - 32 67 30 67 40 40 0,320 30 3.169067-001 32 - Rp 3/4“ - 32 67 36 67 40 40 0,345 1. 1.169065-001 32 - Rp 1“ - 32 67 30 67 40 40 0,420 1. 1.169073-001 40 - Rp 1/2“ - 40 63 40 63 31 31 0,560 1. 1.169076-001 40 - Rp 3/4“ - 40 67 41 67 35 35 0,613 1. 1.169075-001 40 - Rp 1“ - 40 72 37 75 40 42 0,700 1. 1.169079-001 50 - Rp 1/2“ - 50 70 45 70 22 22 0,890 1. 1.169080-001 50 - Rp 3/4“ - 50 74 46 74 35 35 1,020 1. 1.169058-001 50 - Rp 1“ - 50 85 43 87 46 48 0,930 1. 1.169078-001 50 - Rp 1 1/4“ - 50 85 45 87 46 48 0,970 1. 1.169082-001 63 - Rp 1/2“ - 63 82 55 82 36 36 1,100 1. 1.169083-001 63 - Rp 3/4“ - 63 85 56 85 39 39 1,270 1. 1.

Tee female branch reduced end169074-001 40 - Rp 1“ - 32 72 37 79 40 43 0,610 1. 1.169157-001 50 - Rp 1 1/4“ - 40 85 43 80 46 46 0,890 1. 1.

Article No. Size Dimensions SW Weight Box Qty Delivery Unita z kg/pc.

169097-001 20 x 1,9 - R 1/2“/L15 54 39 26 0,082 50. 10.169098-001 20 x 1,9 - R 3/4“/L18 53 38 28 0,095 50. 10.169105-001 25 x 2,3 - R 3/4“ 63 42 31 0,125 50. 10.169104-001 25 x 2,3 - R 1“/L22 63 41 35 0,160 50. 10.169109-001 32 x 2,9 - R 1“/L22 69 42 40 0,240 30. 3.169111-001 40 x 3,7 - R 1 1/4“ 82 50 36 0,350 25. 5.169149-001 50 x 4,6 - R 1 1/4“ 89 50 41 0,480 1. 1.169143-001 50 x 4,6 - R 1 1/2“ 89 50 41 0,510 1. 1.169141-001 63 x 5,8 - R 2“ 105 59 55 0,800 1. 1.

35

36

Article No. Size a z SW* Weight Box Qty Delivery Unit[mm] [mm] [mm] [kg/pc] [pc] [pc]

169099-001 20 x 1,9-Rp1/2“ 53 20 27 0,101 50 10169100-001 20 x 1,9-Rp3/4“ 55 20 34 0,146 50 10169107-001 25 x 2,3-Rp3/4“ 61 19 34 0,160 50 10169106-001 25 x 2,3-Rp1“ 66 21 40 0,200 50 10169110-001 32 x 2,9-Rp1“ 69 20 40 0,210 30 3* SW = Key Width

REHAU Female Adapter with Female Thread, SDR 11ReHAU eVeRLocTM compression sleeve with moulded support ridges for use with RAUGeo pipes SDR 11 and ReHAU eVeRLocTM compression sleeves SDR 11.

Article No. Size a z Weight Box Qty Delivery Unit[mm] [mm] [kg/pc] [pc] [pc]

169125-001 25 x 2,3 46 20 0,137 50 10169127-001 32 x 2,9 54 27 0,259 30 3169129-001 40 x 3,7 58 27 0,457 1 1169131-001 50 x 4,6 67 28 0,700 1 1169150-001 63 x 5,8 81 35 1,280 1 1

REHAU Elbow 45°, SDR 11ReHAU eVeRLocTM compression sleeve with moulded support ridges for use with RAUGeo pipes SDR 11 and ReHAU eVeRLocTM compression sleeves SDR 11.

Article No. Size a z Weight Box Qty Delivery Unit[mm] [mm] [kg/pc] [pc] [pc]

169124-001 20 x 1,9 44 29 0,107 50 10169126-001 25 x 2,3 54 32 0,160 50 10169128-001 32 x 2,9 64 37 0,290 30 3169130-001 40 x 3,7 74 42 0,520 1 1169145-001 50 x 4,6 87 48 0,820 1 1169146-001 63 x 5,8 106 60 1,500 1 1

REHAU Elbow 90°, SDR 11ReHAU eVeRLocTM compression sleeve with moulded support ridges for use with RAUGeo pipes SDR 11 and ReHAU eVeRLocTM compression sleeves SDR 11.

36

37

12 rehau Ball valveS

Article No. Dimension A H L S Weight Box Qty Delivery Unit[mm] [mm] [mm] [mm] [kg/pc] [pc] [pc]

233143-001 20 x 1,9 - 20 x 1,9 85 39 81 18 0,210 1 1233163-001 25 x 2,3 - 25 x 2,3 104 54 92 26 0,344 1 1233183-001 32 x 2,9 - 32 x 2,9 128 58 92 31 0,553 1 1233213-001 40 x 3,7 - 40 x 3,7 148 66 127 34 0,998 1 1233233-001 50 x 4,6 - 50 x 4,6 173 72 127 41 1,597 1 1233253-001 63 x 5,8 - 63 x 5,8 204 82 142 50 2,815 1 1

REHAU Ball Valve with compression sleeve fitting, SDR 11ReHAU ball valve with hand lever and double sided connection to RAUGeo Pipe SDR 11 and compression sleeves SDR 11.Body: BrassSeals: PTFeBall: Brass chrome-platedHandle: Galvanised Steel, plastic covered

Article No. Dimension A H L S G SW* Weight Box Qty Delivery Unit[mm] [mm] [mm] [mm] [mm] [kg/pc] [pc] [pc]

233153-001 20 x 1,9 - R3/4“ 79 54 92 18 17 28 0,267 1 1233173-001 25 x 2,3 - R1“ 98 58 92 26 20 35 0,393 1 1233193-001 32 x 2,9 - R1“ 104 58 92 31 20 35 0,466 1 1* SW = Key width

REHAU Ball Valve with compression sleeve fitting andexternal thread, SDR 11ReHAU ball valve with hand lever, unilaterally formed body, with an external thread to connect to RAUGeo pipe SDR 11 and compressions sleeves SDR 11.Body: Brass accordng Seals: PTFeBall: Brass chrome-platedHandle: Galvanised Steel, plastic covered

With compression sleeve fittings SDR 11 for RAUGEO pipe PE-Xa

All articles from this chapter are available in larger dimensions on request

37

www.rehau.co.uk/groundsource 827300/11 en 05.2013

Uk & iRELAND SALES OFFiCES

London, ReHAU Ltd, The Building centre, 25 Store Street, London Wc1e 7BT Slough, Units 5 J & K, Langley Business centre, Station Road, Langley, Slough SL3 8DS Phone: 01753 588500 Fax: 01753 588501 Manchester, Brinell Drive, Irlam, Manchester M44 5BL Phone: 0161 777 7400 Fax: 0161 777 7401 Glasgow, Phoenix House, Phoenix crescent, Strathclyde Business Park, Bellshill, north Lanarkshire ML4 3nJ Phone: 01698 503700 Fax: 01698 503701 Dublin, 9 St. Johns court, Business Park, Swords Road, Santry, Dublin 9 Phone: 00353 (0)1 8165020 Fax: 00353 (0)1 8165021

REHAU AWADUKT Thermo

REHAU RAUTHERMEX Pre-Insulated Pipe REHAU Underfl oor Heating

REHAU EVERLOCTM Compression Sleeve

REHAU RAUVITHERM Pre-Insulated Pipe

RAUBIO Fermenter Heating

follow rehau renewables

our verbal and written advice relating to technical applications is based on experience and is to the best of our knowledge correct but is given without obligation. The use of ReHAU products in conditions that are beyond our control or for applications other than those specifi ed releases us from any obligations in regard to claims made in respect of the products. We recommend that the suitability of any ReHAU product for the intended application should be checked. Utilization and processing of our products are beyond our control and are therefore exclusively your responsibility. In the event that a liability is nevertheless considered, then this will be based exclusively on our conditions of sale, which can be seen under www.rehau.de/LZB. This also applies to any warranty claims, whereby the warranty assumes consistent quality of our products in accordance with our specifi cation.This document is protected by copyright. The rights conferred therein, particularly those relating to translation, reprinting, extraction of fi gures, electronic transmission, reproduction by photomechanical or similar means and storage on data processing equipment, remain reserved.

Documents

raugeo ground-Source SyStemS - Rehau · partS liSt 827300/11 en ENERGY EFFICIENCY. 2 ... RAUGEO Helix® Probes and Accessories ... 131703-150 150 32 x 2,9 169 323