Upload
others
View
39
Download
0
Embed Size (px)
Citation preview
RAMCO INSTITUTE OF TECHNOLOGY(Approved by A1CTE - New Delhi and Affiliated to Anna University - Chennai)
An IS O 9001:2015 certified Institution
mo mamnID tteWiKMMMt
Date: 10.05.2018
Lr.No. RIT/Mech/II Sem/Industrilal Visit/2017-18/01
ToThe PresidentThe Rumco Cements limited R.R,NagarVirudh unagar - 626204,
Dear sir,
Sub: Permission for Industrial Visit - 1 year MECH (Section A&B -110 students)
I wish to inform you that, as a part of the curriculum, all students are required to undertake Industrial Visits to a few Industries of repute. We feel it will be fruitful if the students with academic background have a glimpse of the industry in order to have a better appreciation of practical applications o f theory.
In this content, we would like to send two hatches of about 162 students of I year B.E. Mechanical and Civil engineering accompanied by six faculty members to visit your esteemed industry preferably on 2*9.05.2018 (Tuesday).
1 request you to kindly accord the necessary permission for the above visit and arrange for guiding the students.
We assure you that our students will observe the rules and regulations that are prescribed by your industry for the visitors and will in no way disturb the functioning of the industry during
We shall be grateful to you for a favorable response. Herewith we have furnished the list of students and accompanying faculty.
Thanking You,
and Civil Engineering (52 students) - 6 Faculty M embers - Reg.
their visit.
North Venganaliur, Rajapalayam - 626 117. Tamil Nadu,Tel ; 04563 233400, 233410; Fax : 233499
e-m ail; ritrj;[email protected] [email protected], www.ritrjpm.ac.in
CERTIFICATE OF INTERNSHIP
This is to certify that Mr. M.N. Shiva Surya Vignesh, 953615103047 of Ramco Institute of Technology, Rajapalayam underwent an internship atTransportation Engineering Division, Department of Civil Engineering, I IT Madras, Chennai 600036 for five weeks starting from 28th May 2018. He was assigned the work of Pedestrian Safety Assessment and Analysis. He did a very good work and developed useful data compilation. I wish him all the best. W x
Dr. S. ARULJAYACHANDRAN Associate Professor
Department of Civil Engineering Indian Institute of Technology Madras
Chennai-600 036, INDIA
S o l a r t is T e c h n o l o g y S e r v ic e s P r iv a t e L im it e dRegis t e red Off i ce : DLF IT PARK, First F loor, Block 3, No. I / 124, Shivaj i G ard en , N a n d a m b a k k a m Post , Mount P o ona ma l le e Road, M a na p a k ka m , Ch enna i - 600089 . Tami inadu , INDIA. Ph : + 91 - 4 4-6 66 455 55
March 27, 2018
TO WHOM IT MAY CONCERN
This is to certify that Ms.Muthulakshmi M, Final year B.E [CSE] student of Ramco Institute of Technology, has successfully completed her internship program with Solartis Technology Services Pvt. Ltd., during the period January-2018 to March-2018.
For Solartis Technology Services Private Limited
Manager - Fluman Resource
Branch O f f i c e : Sorna Thiru Towers , Plot No. 28 8 , Anna Nagar,Madurai - 625 02 0 , Tami inadu , IN DI A. Ph : + 9 1 - 4 5 2 - 6 6 4 5 5 5 5
CIN : U 7 2 2 0 0 T N 2 0 0 6 P T C 0 5 9 4 6 6 w ebs i t e : w w w . so la r t i s . c o m emai l : m a i l @ so la r t i s . c om
solartis
S o l a r t is T e c h n o l o g y S e r v ic e s P r iv ate L im it e dRegis te red Of f i ce : DLF IT PARK, First Floor, Block 3, No. 1/124. Shivaj i Gar den , N a n d a m b a k k a m Post , Mount Poo nam al le e Road, Ma na p a kk am , Chenna i - 60008 9 . Tami inadu , INDIA. Ph : + 9 1 - 4 4 - 6 6 6 4 5 5 5 5
March 27, 2018
TO WHOM IT MAY CONCERN
This is to certify that Ms.Srijanani K J, Final year B.E [CSE] student of Ramco Institute of Technology, has successfully completed her internship program with Solartis Technology Services Pvt. Ltd., during the period January-2018 to March-2018.
For Solartis Technology Services Private Limited
Manager - Human Resource
Branch O f f i c e : Sorna Thiru Towers , Plot No . 2 88 , Anna Nagar,Madurai - 625 02 0 , Tami inadu, INDI A. P h : +91 - 4 5 2 - 6 6 4 5 5 5 5
CIN : U 7 2 2 0 0 T N 2 0 0 6 P T C 0 5 9 4 6 6 w e bs i t e : w w w .s o la r t i s . c o m emai l : m a i l@ so la r t i s . c om
solartis
solartis S o l a r t is T e c h n o l o g y S e r v ic e s P r iv ate L im itedRegis t e red Off i ce : DLF IT PARK, First Floor. Block 3, No. I / 124. Shivaj i Garden , N a n d a m b a k k a m Post , Mount P oo nam al le e Road. M a n ap a k k am , Chenna i - 600089 . Tami inadu , INDIA. Ph : + 9 1 - 4 4 - 6 6 6 4 5 5 5 5
March 27, 2018
TO WHOM IT MAY CONCERN
This is to certify that Ms.Renuka M, Final year B.E [CSE] student of Ramco Institute of Technology, has successfully completed her internship program with Solartis Technology Services Pvt. Ltd., during the period January-2018 to March-2018.
For Solartis Technology Services Private Limited
neral Manager - Human Resource
Branch O f f i c e : Sorna Thiru Towers , Plot No . 28 8 , Anna Nagar,Madurai - 625 0 2 0 , Tami inadu , INDI A. P h : + 9 1 - 4 5 2 - 6 6 4 5 5 5 5
CIN : U 7 2 2 0 0 T N 2 0 0 6 P T C 0 5 9 4 6 6 w eb s i t e : w w w .s o la r t i s . c o m emai l : m a i l@ so l ar t i s . c om
S o l a r t is T e c h n o l o g y S e r v ic e s P r iv a t e L im ite dRegis t e red Of f i ce : DLF IT PARK, First Floor, Block 3, No. I / 124, Shivaj i Gar den , N a n d a m b a k k a m Post , Mount Poonan ia l l ee Road, M a n a p a k k a m . C h en na i - 6 0 0 0 8 9 , Tam i in adu , INDIA. Ph : + 91 -4 4 -6 6 64 5 5 55
March 27, 2018
TO WHOM IT MAY CONCERN
This is to certify that Ms.Vijaya Nandhini V, Final year B.E [CSE] student of Ramco Institute of Technology, has successfully completed her internship program with Solartis Technology Services Pvt. Ltd., during the period January-2018 to March-2018.
For Solartis Technology Services Private Limited
solartis
Branch O f f i c e : Sorna Thiru Towe rs , Plot No. 28 8 , Anna Nagar,Madurai - 625 0 2 0 , Tami inadu, IN D I A . Ph : +91 - 4 5 2 - 6 6 4 5 5 5 5
CIN U 7 2 2 0 0 T N 2 0 0 6 P T C 0 5 9 4 6 6 w e b s i t e : w w w .s o l a r t i s . c o m emai l : m a i l@ s o l a r t i s . c o m
I niI ili iEcliNoloqy SolurioNS IncNa Pvt LtcI
Development | Support | Training
Ref: H,S/lnlnrnr.hl|V 17-1R/Mnr/G9 24-03-2018
To
M.KokllnDepartment of Electronics and Communlcnllon Engineering Ramco Institute of Technology,RnJnpnlnynm-G2G 117,
Dear M s.Koklla,
Sub: Lollor for Internship,
Tills Is lo Inform that you have attended an Internship Program offered by Enthu Technology Solutions India Pvt Ltcl-Colmbatore during 25-December-2017 to 24-March-2018 (3 Months) on Topic "Sm art Health M onitoring system in intensive care unit using Bluetooth Low Energy technology and message queuing telemetry transport". During the Program our Trainers have observed your Skills on Python Programming were Excellent,
All the ilestl
GSTIN No: 33AADCE 9083 H1ZJ | CIN No : U72300TZ2015PTC021189II88 ft 89, SSN Square, Peolnmedu Pudur, Coimbatore - 641004, Tamiinadu, India.
To: +91 ■ 422 > 4217197 | E : lnfo@entluitech,ln | W : www.enthutech.ln
Scanned by CamScanner
Development | Support | TrainingIncHa Pvt Ltd
Ref: ETS/lnternship/17-18/Mar/70 24-03-2018
To
J.B. Anu SelvamathiDepartment of Electronics and Communication Engineering Ramco Institute of Technology,Rajapalayam-626 117.
Dear Ms.Anu Selvamathi,
Sub: Letter for Internship.
This is to inform that you have attended an Internship Program offered by Enthu Technology Solutions India Pvt Ltd-Coimbatore during 25th December 2017 on 24th March 2018 (3 Months) Topic "Smart Health Monitoring system in intensive care unit using Bluetooth Low Energy technology and message queuing telemetry transport". During the Program our Trainers have observed your Skills on Python Programming were Excellent.
All the Best!
GSTIN No: 33AADCE 9083 H1ZJ | CIN No : U72300TZ2015PTC021189# 88 & 89, SSN Square, Peelamedu Pudur, Coimbatore - 641 004, Tamiinadu, India.
Te : +91 - 422 - 4217197 | E : [email protected] | W : www.enthutech.in
Scanned by CamScanner
IB Ei\uhu TEclHNoloqy SoluiioNS 3 1 li\diA Pvt Lid
Ref: ETS/lnternship/17-18/M ar/68 24-03-2018
To
V.Gobiya
Departm ent of Electronics and Com m unication Engineering Ramcolnstitute of Technology,Rajapalayam-626 117,
Dear M s.G obiya,
Sub: Letter for Internship.
This is to inform that you have attended an Internship Program offered by Enthu Technology Solutions India Pvt Ltd-Coim batore during 25-December-2017 to 24-M arch-2018 (3 M onths) on Topic "Sm art Health M onitoring system in intensive care unit using Bluetooth Low Energy technology and m essage queuing telem etry transport". During the Program our Trainers have observed your Skills on Python Programming were Excellent.
All the Best!Thanks and Regards
\ /ksr(a>enthutech.in
GSTIN No: 33AADCE 9083 H1ZJ | CIN No : U72300TZ2015PTC021189# 88 & 89, SSN Square, Peelamedu Pudur, Coimbatore - 641 004, Tamiinadu, India.
Te : +91 - 422 - 4217197 | E : [email protected] | W : www.enthutech.in
Scanned by CamScanner
E ntI-iu T E c h N o lo q y S o l u i i o N s h d iA Pvt Lid
Development | Support | TrainingInfinite Innovationse!
I
Ref: ETS/lnternship/17-18/M ar/67 24-03-2018
To
A.Jeya Lakshmi
Department of Electronics and Communication Engineering Ramcolnstitute of Technology,Rajapalayam-626 117,
Dear M s.Jeya Lakshmi,
Sub: Letter for Internship.
This is to inform that you have attended an Internship Program offered by Enthu Technology Solutions India Pvt Ltd-Coimbatore during 25-December-2017 to 24-M arch-2018 (3 M onths) on Topic "Sm art City Based on Lora-W aste M anagem ent". During the Program our Trainers have observed your Skills on C Programming were Excellent.
All the Best!Thanks and Regards
Rathinasam y.
Training Manager
ksr(S)enthutech.in
# R» f t r 33AA“ CE 9083 H1ZJ I ™ No : U72300TZ2015PTC021189^ dU PUdUr' Coimba'« re - “ I 004. Tamiinadu, India.
• I E . [email protected] | W : www.enthutech.in
Scanned by CamScanner
Development | Support | TrainingIncHa P vt L id
Infinite Innovations
Ref: ETS/lnternship/17-18/M ar/65 24-03-2018
To
G.KoushikaDepartm ent of Electronics and Com munication Engineering Ramcolnstitute of Technology,Rajapalayam-626 117.
Dear M s.Koushika,
Sub: Letter for Internship.
This is to inform that you have attended an Internship Program offered by Enthu Technology Solutions India Pvt Ltd-Coim batore during 25-December-2017 to 24-M arch-2018 (3 M onths) on Topic "Sm art City Based on Lora-W aste M anagem ent". During the Program our Trainers have observed your Skills on C programming were Excellent.
All the Best!
Thanks and Ref J'
Train ing Manaf
Rathinasam y.K
ksr(5)enthutech.in
GSTIN No: 33AADCE 9083 H1ZJ | CIN No : U72300TZ2015PTC021189# 88 & 89, SSN Square, Peelamedu Pudur, Coimbatore - 641 004, Tamiinadu, India.
Te : +91 - 422 - 4217197 | E : [email protected] | W : www.enthutech.in
Scanned by CamScanner
RAMCO INSTITUTE OF TECHNOLOGY Department o f Chemistry
Academic Year: 2017 - 2018 (Even Semester)
RIT/ Chemistry / Field Study /03 Date: 09.03.18
CIRCULAR
A field study is planned to Aravindh Herbal Private Limited, Rajapalayam for II year
Mechanical Engineering A & B section students for the subject Environmental Science and
Engineering (GE6351) for Unit -3 Natural Resources. This field study covers the importance of
natural resources and their impact o f overutilization on environment. The field trip will help the
students to understand the worth o f environmental assets in terms o f natural resources.
Sl.No. Branch/ Semester Date/HourName o f the Faculty
memberSignature
1.II Mechanical ‘A & B ’ / I V
10.03.18/VII (3.00 - 4.00 pm)
Dr. G. Kanthimathi & Mrs. N. Revathi
Place: Aravindh Herbal Private Limited, Rajapalayam.
Department HOD Class Advisor File
Copies to:
A b o u t:Aravindh Herbal Labs (P) Limited is a reputed manufacturer o f Indian traditional m edicines o f Siddha, Ayurveda. Founded in 199.2 by Dr.P.Rajalingam, a traditional medicinal practitioner, Aravindh Herbal . functions with the AH A m ission o f producing “Affordable, H olistic healthcare products for A ll”.
They produce over 300 Siddha and Ayurvedic, personal care, hom e remedy, health food & nutrition products, and traditional lifestyle products from our manufacturing unit in Rajapalayam, Tamil Nadu. Rheumatigo O i l , a herbal product for joint pains, rheumatism, accumulation o f tissues, and arthritis, Hybiscus Herbal Tonic, a hair oil made o f hibiscus, KadukkaiLegiyam, drug to cure constipation, gas troubles, and ulcer, and Gold Pills, a herbal drug for vitality and sexual vigour, and Aravindh Herbal Drink, a herbal drink, as a substitute for tea/coffee, are among the flagship products o f our company.
Our country India is a mega biodiversity country blessed with a variety of Flora and Fauna occupying the 10th position in the world. Natural resources are the
L i s t o f p l a n t s u s e d i n h e r b a l i s m :The ability to synthesize a wide variety of chemical compounds that are used to perform important biological functions, and to defend against attack from predators such as insects, fungi and herbivorous mammals is called herbal medicine. Many of these phvtochemicalshave beneficial effects on long-term health when consumed by humans, and can be used to effectively treat human diseases. Al least 12,000 such compounds have been isolated so far; a number estimated to be less than 10% of the total
Scientificname Name Description
Azadirachtaindica
NeemUsed in India to treat worms, malaria, rheumatism and skin infections among manv other things. Its many uses have led to neem being called "the village dispensary" in India.
sources useful to man and are transformed into useful products. They are classified into:
1)Renewable Resources - Resources which can be regenerated within a time period. Eg: Air, water
2)Non Renewable Resources- Resources which cannot be regenerated within a time period. Eg: Minerals, Natural Gas
Herbs cultivated:Ayurveda and Siddha product are prepared using medicinal plants, trees, herbs - apart from inorganic substances and animal products. Hence these traditional drugs are classified into three groups: thavara (herbal products), thadhu (inorganic substances) and jangamam (animal products).
Run by a team of qualified professionals, the two key business functions of our company are: quality management and corporate social responsibility. Quality is the backbone of their success - they incorporate adequate layers of quality control to eliminate, dust, fungus and other foreign materials from our raw material before manufacturing. They follow Good Manufacturing Process and adhere to various quality best practices in manufacturing, and packaging. They have a full- fledged Quality Lab to conduct all statutory and mandatory tests on raw materials and drugs.
Scientificname
Name Description
Capsicumfrutescens
Chili
Its active ingredient, capsaicine. is the basic of commercial pain-relief ointments in Western medicine. The low incidence of heart attack in Thais may be related to capsaicine's fibronolvtic actionfdissolvine blood clots).
Carica papaya Papaya Used for treating wounds.
Eucalyptusalobulus Eucalvptus
Leaves were widely used in traditional medicine as a febrifuge.^Eucalvptus oil is commonly used in over-the- counter cough and cold medications, as well as for an analgesic.1221
Morinaaoleifera
Drumsticktree
It is used for food and traditional medicine. It is undergoing preliminary research to investigate potential properties of its nutrients and phytochemicals
Nelumbonucifera
Lotus
Sacred lotus has been the subject of a number of in-vitro and animal studies, exploring its pharmacologic effects, including antioxidant, hepatoprotective, immunomodulatory, anti-infective, hyperlipidemic, and psychopharmacologic activity11221 although clinical trials are lacking.
Salix albaWhitewillow
Plant source of salicylic acid, white willow is like the chemical known as aspirin, although more likelv to cause stomach upset as a side effect than aspirin itself which can cause the lining in your stomach to be destroyed. Used from ancient times for the same uses as aspirin.fl441
Conclusion:
We learnt about the different varieties of herbals, plants and their uses in medicinal fields to prevent our body from various diseases . They suggested different ways of food habits and taught us about the importance of yoga to keep our body fit and healthy. They also requested us to avoid junk foods and
V. f o o d ^ '
J. Field study of local polluted sites
, < ^ A ' ^ I
ites- Urban/Rural/Industrial/Agricultural on
Vj «v' 6
/<Ti
h w c/
K e ! o f
/ „ H » » -> « -< • • T l ' £,&<*£. ud«r^*-
f a K - c/7 J f t o f ^ 100 V
r f e f - i b t0 document environmental a s s e t s -
vO<5Ar* lr»r*n1 nrea 10area
$ 0 ^ucVi rUm u yriOM convfnterH io* undvudondi’ Y# - f h f A V L h fc r i id k * '\V\a.\ . O lo i -fa ru JM y a l» o o > m r ^ ( §
5 i o vu?t i^/oaU toalui 'U u aW n t "n ou>i^ campU/A . uf 7 hai ujeu mbaWin^ ondS Ua^vaJ -h u r> c W a n d 1k* conupi 0(, IHf bod tj §g 0(j 'Ib f A u h jtd $y) 0 O ^# O b |/d iV a c3jj Ucufci u ja ta i tmaftwn-l :-
l ■ T h f m am Ob^cHv^ o^ ioojXl u->nb;i
% "tfucdbnfnt cvts, §5 Xg j) | o Convo-ti hoM rr^ui compounds fvrJo» j o5 hQ^rotM* f omttourcl*- <*| 19 -to UUi’m inalf tkc o ^ irw v ' ^hncU
» Yip to >uwovf Solfd ro n b n t t>& *thc g
f U30(J/
iv) -)o (TtM iOLj 1fv riisfOi^ M io& urfnej | t o# y Y M O t o o n q a n U b n A 5
T e X d b l i p t o W a i t K la b - j I n t a f m t n t
5 ty sto n n i n o u h C o JU ie q t C a m p w
| J n t n o d u u c V i o n ’.-
B c u t f d O n £ V S ^ u b j e e t , v tA u a S L id a t io n
'T f t e a W n V p n o « m :-
A iu x x q e vom) u j a A t u i a t w W a r lm e n - l
P ^ io u m in v o ftv a ~ fw | o lio w fn o <5 U p v
1- pMdfmtnemj Tmaifnmt
2- PnThaouiy T t u a l i v m i «*0 5 /fr lfn g p n o u u $-V;
3- S?f.Onda>iy Tx/athrmf io>0 Bfoilaqw'ei/p iF u a d m e n t
V T£> fa>tLj -buajfrwrd
S'- P^pOAOl dj, SJbudq-f.
& 1 • P t te X im fn e m t j T n t a ^ m e n V --
T n 1V i5 > "b u cd m m -l y c oa^i-w aoJacU a n d
AUA[Hr\W TrnpiAHi'b ci^ n/vnoved J^f t W L A jc a b u io t i> i tW io v u jh bew a n d nru^Vi
S c n a o n
2- Pruwatfy TmaYbnml 10*) S^tutrv^ pnoam:-
1n Ihw. tHjiodmcrcl ,qn/atbi pnopoxHon /SUApxndLfd \n o ^ (^ a n \c a n d o ^ a n lc . /o k 'c L ooo 2 UHnoW
|nom *tV dcpuid S-eaa<^
/ \^ ^ 5 0 m 3 -VbHaO ----> 2/inOH)3 4- d-3HxS0y.
(X- T M \ c M m q p x o o w
jnem[>wrray- \>ua.{K'ir\\
TRlCkLlWfli FILTER
b - /\ctTvatizi
A o ia iio n IflnK iH O m | i / | i ir a y L __________
lW/dWrvfionic
A C ^ a tid Sku d y A ititici a\ the boUow Slud(jf
A n j r n t v s u m i p ro a s?
^ T>tucdw \£nt'.'-
tui The S^dondanu (XiaWrd ,*th* <S£u)a< h a A a J o u jo i ’B O D £ i r P ) * o , u r t \ f c h m o ^
yumjoved -buy ttxtiany 'buai rnjenrl [ytou^i.
Sheet No
OiagularYi
•Sed.'Wni&h'on
TMibkiiM
^tondoM tv T ^ a l n v n lp/liW btw T?Uaivwr\l
'Thu u "the leud A^Qcjt fn thu bucdrnm-t-
* dumpirYj into ^Oio ~ JUp ng ayuaj,
Wunn?n^ of Slud<^ (. foef notation J ,
^ dumping \nio the S^a,
^ tufncj *\ oa lo w qnadu ^ H l i z o u -
| i o u 3 chan 't d fagn nu n o{ S e io a a e thL a .bn< n\ ;-
T;ifol/dSeiJ aq/ j/
fhHoMt1nniior>
/ <
S^diVry nl'di Dn
jJ k J L Z a iField Study Planned:
i t injects birds onU Field study o f com m on plan , >
.<?. r i . 1 (jjocs-s r i t ^ ° r _
, t- J fie. ' " h t h ’’" C‘
,W ■ 7 4 £ a l s “
£ c< A^-e-U 0.3 /L</ Mf fy fl 9. /g
v^.wfv • j river hill slopes etc., on '2, Field study of sirtiple ecosys em > £ a n ci/fw-A-h'c- ^ 0M}sh
T h h e ' d L6Ve*'sU S ^ 0 , X c o M - k h , ,
c W « f K i ^ f a ^ ’ '
? u)A.Ua fi'*'
•j,<.cO\V
i l p? v ^ i v r c - ^
„ e f c . , 1 U V « l s o *««'»■■* t " " *d . . , . S l < y } ^
trial/Asncultural on
( o n t h M 1 on. .
h l r t v n b 0 K t
P M e y j oion
e<U.ta b° o n ' con fca^p d to n
% lr \ d o n n p „ J [,o\an\tcjy p lanV PiYlc) W p ^ .P P ™ " V o l a n t p a x l ^
Conc.pL- bL(j feuck.no
^ u » ^ . % U H w u n ^ b , ^ . f lU o
* * 1 * » " > * t o . o p « , hV ^ ^ 2 t ^
k t “ “ t o r t * la - ° b * ■
aov t o p cU cA C cnop t t a . r t f ^ lo # tf
pN jvride* b c .t t e ^ U-nclenAtoncij'f
2 h a v < L fe fe o A lC 1lru ^ X U J ) ^ rvuimbeTiA 6
CVi£mr/SW^j c k fx A W n t . % Q * j* n iV a gnOdL Vtfp
.A W>- Icckb hoc. took 0- <2 oup pkoto “ra tkc_
^ jp . oXbO Qr*Ltovv€< tw. pkoVo Copf&x 'In tVii/>
fcpofcV •
Tfo, tx a x te d u x d n +eunfc r a m M M is 4 r o t f g .6 r p .
Ao™ w d Casu- holoL u p b ^ *"*
Tfte LU $Jj2±- 4 Wu £uk>U£ jX iU u M - tVUL- c txa .0 r\oo^ iCJaXn .
J-f ^ [-7 0^ / k> b o / . ^ /to (T T ^ o l bupcxGol
uxxJbLA Cb U J ^ . ip n f iM v e a ^ .
* bwSde, i'6 E tflfluVuCog airoui: bipaJt m iM fbxoULU.
S f t d ls n fc U X « - t ia s x i^ <m ttuL. h>P <* ^
W m w t tanfc . ^ d a *'4 C b t e u ^ ,4 * d . O do^d.
S rtaJtM te’ * » * * < * > to ( ,U JS ' , a r dLuaJw f w n v o ju q l^ a a X W *>
/V u tk L to fcn ieH tf * * |* x n A j « J c u * fM . r» « > a n s
^ J , f f c 1 - a W v M *0 r ^ M h u M ,
C u t lnn(UXMU'£S<
Sc\OWL £qM\(^ 46X) \L tVuZ- dSCLuJCK^ LOoatexi i b CcrUiuJ^of
h \%t 710X0 ^U_pa^2. d4ytlt-HV^ + a/)t A i Ze lTUL £aLpG(&‘
fa bm v 4 Trn * g. s^nn & £f4 &co w a s t u l i :n £9 o ro l
hA^n ^erH ft) <Mh'o^ -faint ±on rrwaJrmmK
ViOJJlb ^
to hxrtd, loooou'fee a s d c a jtc L ^ cXpqvka- l o o c d <\
(JDOJbn fJA dOJ^ *
-T' /v+to ula dvi (uJcLAVe ) ib k tw jd zd tuifio, <2r\-^rn^>
c u v l b a iW * > 'V to f° b ra is* ^ ‘
R A M C O I N S T I T U T E O F T E C H N O L O G Y
R A J A P A L A Y A M - 6 2 6 1 1 7
(Department of Mechanical Engineering)
Field trip report o f II Year M echanical Engineering- ‘A
Date of Visit: 10-Jan-2018
Place of Visit: College Premises.
Submitted by,
N.Kabilasudhan
(953616114029)
Field-Trip Report
As a part o f interactive learning, the students o f II-M ech-A
were planned to be taken to the field study to explore the nore o f
the Environm ental science. O n receiving perm ission from the
Principal, the students w ere taken around the college prem ises
by the faculty in-charge, D r.G .K anthim athi on 10.01.2018
around 10 a.m.
The tu to r explained the purpose o f the trip clearly and also
related as m any theoretical concepts taught in the class w ith the
live practical exam ples available in the locality.
The 1-hour short trip not only helped us w ith the studies,
but also taught us to observe and enjoy the beauty o f the nature
and its m yths.It was a nice experience to look at the daily
scenario from the different perspective.
The trip cam e to an end by 10:40 a.m. The students found
the trip useful and we expect m ore activities regarding the
subject in the future.W e thank our Environm ental Science
teacher, D r.G .K anthim athi for her efforts in arranging the field
study and leading the students to gather utm ost inform ation.
CO INSTITUTE OF TECHNOLOGY Department of Chemistry
Academic Year: 2017 - 2018 (ODD Semester)
RIT/Chemistry / Field Study /03 Date: 03..0.17
CIRCULAR
A field study w ill be conducted for I! year Civil, CSE, EEE and UJ ECE A & B
studen ts for th e sub jec t Environm ental Science and Engineering (GE6351) for Unit -3 Natural
R esources. T h is field study covers the im portance o f natural resources and their impact o f
overutilization on environm ent. It makes the students to understand the worth o f environmental
assets in term s o f natural resources.
Sl.N o. Brancii D ate 1 N am e o f th e F acu ltv m em b er S ignature1. in ECE B 05.10.17 Ms. R. Chithradevi
2. III E C E A 06.10.17 Dr. G. Kanthimathi
— Lie------------------------
3. II CSE 06.10.17 M rs. N. Revathi
4. II Civil 06.10.17 M rs. C. Subha
5-II EEE 06.07.17 M r.K. Karpagavel
---------1----------------------
Copies to:
Department HOD Class Advisor File
" V HOD
Form No. AC 20a Rev.No. 00 Effective Date: 1 S/01/2016
Ill
RAMCO INSTITUtp ~ .\ . } * I ' C l l N O l O f v
APARTMENT o f coimpotfd AM -«r>l 17 Vt R S C I E N C P , v n
'-*■ a n d e n g i n e e f
Course: E n v ir o n m e n t a l S r ioCourse code: G E6351 and Engineerin.Topic: Field visit report 'Date: 6-O ct-20l7
Submitted to: Ms.N.Revathi Submitted by: K.Srinithisivasa, Department: II year CSE Regno: 953616104051
RAMCO INSTITUTE OF TECHNOLOGY Department of Chemistry
Academ,c Year: 2017-2018 (ODD Semester)
r IT/ Chemistry / Field Study /03Date: 03.10.17
CIRCULAR
A field study will be conducted for II year Civil, CSE, EEE and III ECE A & B
students for the subject Environmental Science and Engineering (GE63SI) for Unit -3 Natural
Resources. This field study covers the importance of natural resources and their impact of
overutilization on environment. It makes the students to understand the worth of environmental assets in terms o f natural resources.
Sl.No. Branch Date Name of the Faculty member Signature1. III ECE B 05.10.17 Ms. R. Chithradevi
/ f a — — ■"2. III ECE A 06.10.17 Dr. G. Kanthimathi 0 -
3. II CSE 06.10.17 Mrs. N. Revathi
4. II Civil 06.10.17 Mrs. C. Subha
5. II EEE 06.07.17 Mr.K. Karpagavel------- -4>—--------------------
"V HOD
Copies to:
Department HOD Class Advisor File
Form N o. A C 2 0 a R e v .N o . 0 0 E ffec tiv e D ate : 1 8 /01 /2016
Scanned by CamScanner
■ I ”
f m
r u * . i r . i y . U '< ? U n v . , - < ) o h r J [ b f f - i e \ A
\ j ' \ s \ K t 1" V t . i i u r n ) y , U K
i J i w i ' - t n t o c l i I n i t v.fi f . t o l A 1 'V I ItV l £ . C • d / M C f u t A c v i .
^ - P - V i A V - ( , s A
* l [ v f c c \ , { V I a i u r a . ^ C c w X ^ c H J i { v
tV ^ c V ^ t U - ^ o f M . c A l c i - V x ^ ^ k k t v , a .h A b v ?
i : r \ 1 r € 6 f c T V e I C v C .
k r t v i f c Y ^ t ^ f o ’ K . b p ^ ^ v A ^ i o
W C V P P b o . 1 l v r € w * U - £ 2r - £
S c C V L b r . £ d , ^ f o l W ^
v v S j2 - b O . K . A X i d ^ l v n - U u p > ^ ( X
/ ) » o l a + r e £ ^ f U c i ^ A
£ > m y .
V -o l^ t *
* X b L S b v Q o C C - C f U - K , b ( C , C X { 'T C C V f f ^ - v A c V l £ 1
* ^ h o [ r t £ f u J t C £ I A H - t k ^ S b * b n tu C t v M m )<£
^ c u y o u ^ g i b m g e v .
* l b ' i V v t ^ V ^ b (L ^ fO Y )eM ^ - C 9 _ ft
T v i p V u ^ t ^ ^ ^ U V V ^ A - i C , - f e T - r l o n u X ^ - f f O ^
v , J ^ l U A U v v s e A - h ?
Scanned by CamScanner
1 :• '
A V - c
t
N Z ( t * <.».<■ U f u n , „U f .
. ^ v ^ 'A k A (\c,A W l w c c >< ? £ V v i W t ^ i . ' V f M ' t . ' I t u ’ Ct l l \ ( ’ A a a W f - i j
u ’" «*•* v n U i“ r f\ A ) 0 ) $ O A J > f l - c W t ^ > C v ^ ^ n t > f V l/ L t - ' V V a a i n c M o t
, . o o a J lM a 'k o ^ i u c «f [ / 0 A ^ r
. t v - e ^ t r C m - M S e w T f a l I V I V i - ' - S
w t w r t o * * ■ u t t J 'o H
' . , r . c c r v U ^ V
VU ^ . A v ,s,F c ^. OLW-t- 1V L
Vt d e a d ? W ^ ^ ^ ^ V •
O ^ - W j ^ G C t V l '- I?. . , \s + > \ f > '
VuA-fcU^ .
torScanned by CamScanner
RAMCO INSTITUTE OF TECHNOLOGY Department of Chemistry
Academic Year: 2017 - 2018 (ODD Semester)
RIT/ Chemistry / Field Study /02 Date: 07.08.17
CIRCULAR ,
A field study will be conducted for II year Civil, CSE, EEE and III ECE A & B
students for the subject Environmental Science and Engineering (GE6351) for Unit -2
Environmental Pollution. This field study covers the topics of causes of water and soil pollution
and sewage water treatment. It makes the students to understand the various causes, effect and
control measures of water and soil pollution and also the process involved in sewage water
treatment.
SLNo. Branch Date Name of the Faculty member Signature
1. III ECE B 08.08.17 Ms. R. Chithradevi
2. IB ECE A 10.08.17 Dr. G. Kanthimathi CX (fe — ‘3. n c s E 11.08.17 Mrs. N. Revathi
4. II Civil 11.08.17 Mrs. C. Subha
5‘11 EEE 11.08.17 Mr. K. Karpagavel
Copies to:
Department HOD Class Advisor File
Form No. AC 20a
I ntroduction !
A "reportt -haui "§>een juoniiteja ab& uJr jthe
UiAiJb d o J tia e A e n ja c je jb re a Jh rn e n i: ^pHounJb Jx lH jlcK Ja> l o c a t e d .
oHuB-un d h e c&Uecje c a m p a iA . T he T epcm b cenAthJbs jb^ jfche c L e ia its
^ i k e .A e iu a ^ e d Y e a tm e n J b ^ f d a n tn j m a n u ^ a c L a r e J9 £ jT n a n u r e
m n d acecLjcXtncj jLOja-tcr.
Lo c a t io n d e t a i l s
T ? ie A ejD ag e J ta e n h m e n t ^p lanJb a s .L o c a te d . n e a r d h e
m a m b lo c k ju o> uxk a s j& p jp e d d e d© ' JfcKe c^cxis dx©-Afcei.
The. jta n k as Connected Jte- Jtke. gods -hostel > begs hostel j
m a in hieok an d jb h e a n d d o x in m d hnm gh d S ie underground
i-pdpe Jm.es.
T^r-e Sewage tre a tm e n t ^ la n L contains Jbno danks
d h e te -ce u lo tia n Jtank a n d €?ne SeddnentaJbuerx jta n k .
I d as also tjlux hg a. slides
a c tu a l "W ig h t je ^ dthe jta n k as 3.5 to A- m . IFie. Seioage
“ .enna JtKe u."rinals a n d d in s, &Hy£T juo antes am e ceUected.
g e n e ra to rs . The
^v^uloL-rjl^ . •I*'- JtKe -^tocuitXttflYi jta n k d W ^ & tu l aoaAfce*
jocre d h a ^ e d o n to s m a ll ^ ^ r lic le A a n d a m e x rtu c bacfcenas
jUb aUcuuoed J n -act “e'n ■jLb-
H a m o f a c t u r e o f m a m o r e
TK e juoasJteS ^-rerm JtKe ^Lrxfc dank a* dCJnt Jntty
dke. se co n d sed im en ta fcu fm jta n K , dSae ^ x c a itt^ e
W seltHB < W l a n d it ie Settled dxixun ^ d u d e x a re
CeU ecW t a n d < W -fcc* A f o ® A 4 * " e ' ■*UOTS
^ cem p ie te la fr e e i r e n n « * « * . T H e ^ M A , s
jo te d a s A te -fd a rd s d O h icK a re g-rooon
in dH e r d e n . T K e h j - p m d u * afco a c t a s J « o
<^rade ^eYJbJu>ers.
U J A T E R R E C Y C L X M C n
T h e MJas±e a o a te r rc o L jd e d aurui Jtreafced
jja jd K C eY jta in . cd e rm xa iA JiJk e . cKJU ajudeA j a iu xn e tc .
Ik e o d ta u r j© d h .e juooudoe, ju ja Jte Y a x a U o Ye rro ve d cu>
Jb tte jp aYJb LclLt. a x e re m o v e d .. T K e jn a d e r a x r e c y c le d a n d
ja s e d -^ o r a a id e n in ^ <Jf>Junpe*eA.
f i d i &-n ^ ^ 2 - u3atew T r c a J ^ m e n i *
H <2. 'JO^rvA -to ^ o l d M a d d j l U O i t i m i S M
JCteodrnv^Jvt i ~\W. M0CU*\ e. vjOat&d pWfiV V*» lo c o le d 0 ^
& W l U c U ©^ a m c j ^ J l y _ . * T l W w W - j ^
O ttv l W v M \V 4 o v U V V - It a y \ a v i3 r •
l - v U W y\<wd ^ lU °
A * t A K ^ - d * * » * < • * * “
f e w a i t u » V e w ■ ^ ^ *
^ * » V A© t o 4o-fiX Y ^
t e U O M t e w a i a M . 5 + - L 0 J d < w t ^ » V u y .
^ . t o -rt t® V4 \kx
\ ta .
v \ Y\ni\V VJA- ^ um£-OJVO "Vo^Vv v?>
M \ IM t ^ _ U^ccVow u
f r u A O r t ^
^ eJU D w A . V ^ V -
Vu j u ^ i V
• V a w k
VSvu
** r *-r» fc **" v t * ^ * * * " I
™ » » ^ « ' " » n <i'u ' " ” * * * " < v
YQfi-
rCo«xv A - A y’i l q x\Ol »-^o c ^ D u«<> S f c u d k y r ^ )r\ _u c^c.<w C S C
^ oUjr CAVC^I. |\(2rrC 3 0 ,J < \ Vo UJVltC \V\tL f l ' d d
^ v e ^ f c X W t o > e W V ™ A c l o A X o w
i« l '**»*' _^r- t(>vif«\<nCr*nV SciCnCC. »<«1 <-^.0 T*X
^ 3 e d t / 5<s* SV jlu^H n^ V^e. \o«o \m cA •*
N. U I > ,U V Ic v s k d - l ‘ 0Cse*jJQjgjt3 k p o n t toW<Jp» IS
cv u s M ^ i U t / O U">oct* R S T c c i ^ P ^ - 3. V ' S ^ COfcQ
o « l ^ W C s t . a x W i — U p J ^ n
Q C JJX
Ik e
u i s * # . o n A X° ^ M d
W C. S f b f c - Ik C / Y Q - W S o ^ « , o ^ tc)m C ^ Oofcfc;«VNe»
^ V s ^ ^ ^
1 , Cw*F e r \ o d \ . c o C . S C G .^ 2 . \ x r e o k r n e n l pVo<j\fcy
V vWA W n o - c x e d t ^ fK v rc^Ssa^o^txv A *cU ^ v» , ^
•lft o > ' ' # ' * P
^ xv c W v ^ IS v * * ^ ^
t o u*\dflA-s; t c u \ A p x c x c ^ G a V ^ v c A V c a
a
i
4 i
RAMCO INSTITUTE OF TECHNOLOGY Department of Chemistry
Academic Year: 2017 - 2018 (ODD Semester)
RIT/ Chemistry / Field Study /02 Date: 07.08.17
CIRCULAR
A field study will be conducted for II year Civil, CSE, EEE and III ECE A & B
students for the subject Environmental Science and Engineering (GE6351) for Unit -2
Environmental Pollution. This field study covers the topics of causes of water and soil pollution
and sewage water treatment. It makes the students to understand the various causes, effect and
control measures of water and soil pollution and also the process involved in sewage water treatment. *
SI.No. Branch Date Name of the Faculty member Signature
1. III ECE B 08.08.17 Ms. R. Chithradevi
2. III ECE A 10.08.17 Dr. G. Kanthimathi — '
3. ncsE 11.08.17 Mrs. N. Revathi
4. II Civil 11.08.17 Mrs. C. Subha
5. II EEE 11.08.17 Mr. K. Karpagavel
HOD
Copies to:
Department HOD . Class Advisor File
Form No. AC 20a Rev.No. 00 Effective Date: 18A) 1 £016
Scanned by CamScanner
FIELD VISIT REPORT
On 8lh of August 2017, we were taken to the field visit of Sewage Treatment Plant (STP)
in our college. There we learnt about how sewage water is being recycled and reused. This is the
most efficient way of using water. At first sewage water is led through pipes and is collected in
aeration tank, where sludge is added to the sewage effluent. Then agar media and jaggery are
added for the growth o f aerobic bacteria. These aerobic bacteria are responsible for decomposing
organic impurities. This whole process is called aerobic oxidation. This process removes 90-95%
of BOD. After this these wastes are carried to the sedimentation tank. In that, sludge is settled
down. The supernatant is further processed and purified. It cannot be used for drinking purposes
but instead used for gardening and other purposes.
i
1
Scanned by CamScanner
Field $iujdUj a{- ecosystem[2u-en- n o n , T'v’ hauTJIntroduction:
T"hq report hca beer) prepanecf abecdt pimple
ecosc^fe/ri uJlxtcb bb located, neon' fo oun co ll© ^ Ca*nf,cu>. Tfa repor, COMirfs ^FKe ecastcim tuhxcb uue visit. UJe visit the ^rabs load ecosc^tem, and forest ecosystem-
Girctbs land ecosftdon):
The Gimss land eeostem ujhich m locatedUlittun oun College, hut that ts smalL example.Whcsie cue (2ur) ' <fc>ee p lants ( g r a i s $ m ail p l a n t s , . . .") ,i rejects, birda. The function the Pcojtem Ju,
p la n ts —b ] raects .— biroU. ome tim e the rab b it Cajme to the place.Nent a)e moved to the oltan ecostem. Fort ecostem:-
ie r ^rcu>5 Sand co<sVan? uue event do*}Hc 'forebt- That 15 located hear do our?Collecp. CcurnpLLb. vxlhere cue <scux> more /lumber c/f_dree*.
UJe reach bhe boandany cf the •forei-t or\JUj-
Xn deeper <§\dle wild arurm U come.
Tn dhcd -foreM uue <Souju a cueU -Tftc weU is{ulUlj covered by almost and, UjcuVek • 15
dxut +o o v H M u n i s W J 4 ^ tro g a i , H is
called EadprophicaJhoo.
The fancfion of fone&l eeojtenn M
p iw ftf' ^ '1)eer , r a h h ] { Lion r +l^er — > b a c t e r i a
Han and uuild life Convict><§>orm yearns ago , 'tire dicjqti , elephants oaie
roam ina in dho fo rest, bud- Vm m an kan td .
•fhc aninactU Mouu "Hwi^ Is ^0 > r>d h a l forest.
for dh& evidence field sj'uxUj unsattached orrui photos in that-
— E ieU L
/ i r - t * «“ J U//eaS)-CS£_
h„ M tc n n a ^ a , <J
< / rk A t n ie r ca 'iclM aLcA -
* ^ ud ^ , w , ^ N e ^ H
p r . « . C A ^ . P , ^ ^ ^ ^ ^ _
* / W - * « , * * ^ ^ l i w > y ^ ^
1 * * * ^ h L t T“ * * 4 o # . A , , « * * * „ > ^
k j I I - I f f A - n ^ ( J . e r . « , 7 . A * * * * ft M / i H ^ C ,
f f j M iU n en Wou.mcl r u c k v f f t J k t
Inti fUtf ■ V . n,Mty .d £ M )i Hw^ n ^
U \.
a*c{ reach u f a fce tf / £J/uYA t6 <5 4'DU-'> u j f r H j f a m e r / %
lo h o w r h e u h K i r e & trjfihex H j cv o p * . %
/ N t b e g a n 'h K y o to / > b n z ^ m b ? b . u e p la y f t f ***(
levjeyecf H e r e q lty a*'fc H> f t t j AbeLg , % , py*feM tr&
t o k o G -C C o rv k j' a ^ C f f I s J l Y t ( Y f l c i i i u ' r y L a f t b m h "ff\S
thjYyvtj-n cLyg as\o( <f£jt /.[‘CCa'CA (j-vtrg aroune/ K j ArtO- \
b e t o i r e O j ^ x z e e f O n A a e / H t f d j f j t r e n k h f p e A b > d A >
b e A{Z(x> maruj cobvofu I buHe^frCA. „ be erycyecf Uclf^pj
deej> f o b f ^ j , ^ g f i u e r t - g l a . y , y y o H f t n < r ^ > f c n d b ■>
fo jfe Y fo jin jih g (Ajl iyij> / lot rtbeYHeef b> otan
’*<ivj>uk'Yt c b w -t o . b y bkc end of +Ll k o u r , -iV Ua a a
to h d tY jfu ) j y i j , v
RAM CO INSTITUTE OF TECHNOLOGY Department o f Chemistry
Academ ic Year: 2017 - 2018 (ODD Sem ester)
R1T/ C hem istry/ Field Study /01 Date*. 15.07.17
CIRCULAR
A field study will be conducted for II year Civil, CSE, EEE and III year ECa A & 3
students for the subject Environmental Science and Engineering (GE63rI) ter Lrut -I
Environment, Ecosystem and Biodiversity. This field study covers the topic e: terrescea.
ccosystem. It makes the students to understand importance of producers, consumers ar.e
decomposers. They also understand the functions of ecosystem such as food chain, toed v.ec.
energy flow and nutrient cycle.
Sl.No. Branch Date & TimeName of the Faculty
memberSignature
1.. III ECE B 17.07.17l:25-2:15pm Ms. R. Chitradevi (Oj l ^
2. III ECE A 18.07.17 1 l:45-12:35pm Dr. G. Kanthimathi
3. II CSE18.07.17
1 l:45-12:35pm Mrs. N. Revathi
4. II Civil22.07.17
03.20-04.10pm Mrs. C. Subha
5. . II EEE22.07.17
11.45-12.35pmMr.K. Karpagavel
^ 5 h ! n 6 , . ^ - n S wH O D H ^ P U c - l U V i u
Copies to:
Department HOD Class Advisor File
Principal
Scanned by CamScanner
f i e l d v i s i t r e p o r t
, students ot III-ECE B went to a field visit to the backyard of Ramco Institute of Technology on 18.07.2017. There we came across many species of shrubs and trees. Some of the
shrubs are Tulsi, and few thorny plants. The land was covered with dry grass. Then we went to a
nearby well. The water level was low .We were much interested to know the food chain in the well. The food chain we saw was
lnsects->Frogs->Snakes
Then we came across large trees like mango tree, jackfruit tree, coconut trees etc. which
are high commercial value. Example mango tree which yields ripe mangoes at a particular
season and sold at a good cost in the market. Coconut tree has lot of uses and many things are
made from coconut, leaf etc. Jackfruit trees yields jackfruit which is of high value in the market.
The abiotic components, the climate was too hot and hot winds blew. The soil was
enriched with nutrients and minerals that would support the growth of wide variety of plants and
trees. Some o f the biotic components we saw were ants, insects, peacock, crow s, snake, fross etc.
Decomposers like Bacteria and Fungi were present everywhere.
So we had a good time gaining a good stuff about the terrestrial ecosystem.
Scanned by CamScanner
RAMCO INSTITUTE OF TECHNOLOGY(Approved by A IC TE - New Delhi and Affiliated to Anna University - Chennai)
An ISO 9001:2015 certified Institution
IS O 9001:2015
ID 9 1 0 8 6 3 3 0 9 3
Date: 14.07.2017
To
The Director
Kerala State Science and Technology Museum (KSSTM)
Thiruvananthapuram,
Kerala-6 9 5 033.
Dear Sir,
Sub: Industrial Visit of III Year B.E. Civil Engineering Students
We thank you for giving permission for our students to visit your organisation. We will inform you that 67 students o f III Year B.E Civil Engineering along with two faculty members will visit your organisation on 15.07.2017 (Saturday).
We assure you that our students will observe the rules and regulations that are prescribed by your system for the visitors and will in no way disturb the functioning of it during their visit.
Thanking you,
Yours faithfully
HOD / Incharge PRINCIPAL
North Venganallur, Rajapalayam - 626 117, Tamil Nadu.T e l: 04563 233400, 233410; Fax : 233499
e -m a il: [email protected], [email protected], www.ritrjpm.ac.in
RAMCO INSTITUTE OF TECHNOLOGY Department of Civil Engineering
Academic Year: 2017-2018 STUDENTS NAME LIST
Semester/Class: V Semester B.E. Civil Engineering
Accompanying Staff: l.Mr.T.Chockalingam, AP/Civil
2.Ms.A.Hari Rama Lakshmi, AP/Civil
SI. No. Register Number Name of the Student
1. 953615103001 ABIMANYU S2. 953615103002 AJEETHKUMAR R3. 953615103003 AJITHKUMAR R4. 953615103004 AMRUTHA PK5. 953615103005 ANANTHAVEL P6. 953615103006 ANISA SHIFANA D R7. 953615103007 ARAVINDHAN S8. 953615103008 ARULINFANTA X9. 953615103009 BHUVANESWARI J10. 953615103010 DEEPAK A11. 953615103012 DHARINI R12. 953615103013 DINESH G13. 953615103014 DINESH P K14. 953615103015 GOKULA NANDHINI G15. 953615103016 GOKUL NATH M16. 953615103017 GURU KISHOR K RA17. 953615103018 GURU PRASAD K18. 953615103019 JAYA HARISH S19. 953615103020 JEEVA P20. 953615103021 JEYA SNEHA J21. 953615103022 KANNAN P22. 953615103023 KARANKUMAR M23. 953615103025 LOGHASUNDHAR AC24. 953615103027 MARUTHARAJ S25. 953615103028 MUTHU PRAKASH N26. 953615103029 MUTHU VIJAYA KUMAR R27. 953615103030 NAVEEN KUMAR V28. 953615103031 NIVETHA RANI R29. 953615103032 PETCHIMUTHU M30. 953615103033 PONKUMARAN M31. 953615103034 PRABHUC32. 953615103035 RAGHUL T33. 953615103036 RAJA RS
SI. No. Register Number Name of the Student
34. 953615103037 RAJKUMAR R35. 953615103038 RAMKUMAR K36. 953615103039 RAM PRASAD A37. 953615103040 ROHITH KUMAR R38. 953615103041 SACHITHANANTHAN P39. 953615103042 SARATHKUMAR S40. 953615103043 SATHIYARUBAN K41. 953615103044 SATHIYAVENI KB42. 953615103045 SELVAKUMAR T43. 953615103046 SHARATHA P44. 953615103047 SHIVA SURYA VIGNESH M. N45. 953615103048 SIVA B46. 953615103049 SUJITH S47. 953615103050 SUKESAMOORTHI C48. 953615103051 SUNDARA PANDIAN N49. 953615103052 SURYA B50. 953615103053 THIREKA M51. 953615103054 VAISHNAVI P52. 953615103055 VENKATESH M53. 953615103056 VIJAYA KUMAR K54. 953615103057 VINOTH S55. 953615103058 VISHVASENAN A56. 953615103059 YOGANANDH S57. 953615103301 AJAYKUMAR E.R58. 953615103302 ARUNKUMAR M59. 953615103303 CHANDRU G60. 953615103304 DEVA MURUGAN R61. 953615103305 JEYAKUMAR S62. 953615103306 KARTHICK RAJA S63. 953615103308 MOHAMED BAGRUDEEN M64. 953615103309 MOHAN RAJA C65. 953615103310 SORNA SUNDAR RAJ B66. 953615103311 SURYAPRAKASH M67. 953615103312 VANAMOORTHILINGAM M
Class Adviser HOD/Incharge '
' f J Ltr~ —----- -—“
Principal
Spreading Splendour
The Kerala Minerals and Metals Ltd.(A Govt. O f Kerala Undertaking)(An ISO 9001, ISO 14001, OHSAS18001 & SA 8000 Certified Company) SANKARAMANGALAM, CHAVARA-691 583 KOLLAM, KERALA, INDIA.
0476-2686722 to 2686733 (12 Lines), 2651000 91-476-2680101,2686721
km m l@ m d3.vsnl.net.in , URL w w w .km m l.com CIN-U14109KL1972SGC002399
T P/PD /G A -24/1717.07.2017
C E R T I F I C A T E
This is to certify that Sixty Nine (69) B.E. Mechanical Engineering Students
& Two Faculty Members of Ramco Institute of Technology, Rajapalayam
have visited Titanium Dioxide Pigment Unit of the Company on
17.07.2017.
vara P. O.
U *
M (PR/P&A-TSP)
K.M.ANIL MUHAMME0 Manager (P. R / P&A-TSP) .
The Kerala Minerab and Metals Ltd.5 nkarawnwtem,rh»» .fM1«?>W.lfnlNp IferBfa.
RAMCO INSTITUTE OF TECHNOLOGY
RAJAPALAYAM - 626 117Department of M echanical Engineering
Industria l visit report o f I I I year M echanical E ngineering-“B ”
Faculty Coordinators:
Mr.M.Lakshmanan, AP/Mechanical
Mr.L.Karthikeyan, AP/Mechanical
Student coordinators:
Mr.R.Rakesh (953615114076)
Mr.E.Selvakumar (953615114090)
Date: 10.07.2017 (Monday)
Place: The Kerala Minerals and Metals Limited, Government of Kerala Undertaking, Kerala.
Introduction:
The following report is based on the industrial visit undergone by us in the period of 10.07.2017(Monday) at The Kerala Minerals and Metals Ltd., Sankarmangalam, Kerala. The main raw material for Titanium Dioxide is Ilmenite, which has been available a lot at this place. This report has been written in reference to things we’ve learned in the plant.
General information:
Products:
> Titanium Dioxide Pigment (Rutile)> Nano Titanium Dioxide Pigment (Rutile)> Magnesium Chloride> Titanium Tetra Chloride> Titanium Sponge
Raw material:
Ilmenite
Unique features:The Kerala Minerals and Metals Ltd (KMML) is the world’s first fully integrated
Titanium Dioxide Plant. KMML is also India’s first and only manufacturer o f Rutile Grade Titanium dioxide by chloride process.
A highly quality conscious and environment friendly company, with commitment to continuous environmental improvement, KMML dedicates its research and development towards promoting technology, processes and applications that focus on a greener world.
Overall process:
Titanium dioxide (Ti02), also referred to as Titania, is a substance as old as the earth itself. Titanium dioxide is readily mined in its purest form from beach sand. The beaches of Sankarmangalam and nearby areas in Kollam are inextricably intertwined with the history of this substance and KMML. Titanium Dioxide is essentially harvested from sea. The Mineral Separation Unit (MS Unit) of KMML is engaged in the separation of Ilmenite, Rutile, Leucoxone, Monazite, Silliminite etc from the beach sand. The MS Unit employs Gravitational, Magnetic & High Tension Electrostatic Techniques for separation of minerals from the sand.Raw Ilmenite is chemically processed to remove impurities such as iron, leaving the pure, white pigment available for use.The chloride process produces TiC>2 products by reacting titanium ores with chlorine gas.The chloride process produces TiC>2 products by reacting titanium ores with chlorine gas.
The chlorides of impurity metals are removed from Titanium Tetra Chloride (TiCU) through various processes to complete the recovery of TiCU. It is further purified by distillation to obtain pure Titanium Tetra Chloride in the liquid form which is stored in storage vessels. Titanium Tetra Chloride is vaporized, pre heated and oxidized with oxygen in the Oxidation Plant .to produce raw Titanium Dioxide at a high temperature.
Beneficiated Ilmenite (BI) is the raw material for the Pigment Production Plant. BI from Ilmenite Beneficiation Plant is chlorinated in the Chlorination Plant to produce Titanium Tetra Chloride (Tickle). Chlorine reacts with Titanium Dioxide and other metallic oxide impurities in BI in the presence of petroleum coke at a temperature of 9000C in a fluidised bed chlorinator to produce chlorides of Titanium and other impurity metals.
The raw Titanium Dioxide is then classified and surface treated with various chemicals, filtered and washed to remove the salts, sent to the dryer and then to the microniser, in the Pigment Surface Treatment & Finishing Plant. The Titanium Dioxide pigment (in powder form) is subsequently packed.
The plant uses recycling and regeneration methods at various levels of processing, including acid regeneration, which ensures negligent pollution. Responsible harvesting from the seas reaffirms their commitment to the environment.
RAMCO INSTITUTE OF TECHNOLOGY(Approved by A IC TE - New Delhi and Affiliated to Anna University - Chennai)
An ISO 9001:2015 certified Institution
IS O 9001:2015
ID 9 1 0 8 6 3 3 0 9 3
Date: 13/07/2017Lr. No. RIT/Mech./V Sem/Industrial Visit/2017-18/02
ToThe Managing Director Traco Cable Company,(A Government of Kerala Understanding)Via Chumathra,Pathanamthitta District, Thiruvalla,Kerala, India - 689 108.
Dear Sir,
Sub: Permission for Industrial Visit - III Year MECH - 70 students - 2 Faculty Members - Reg.
I wish to inform you that, as a part of the curriculum, all students are required to undertake Industrial Visits to a few industries of repute. We feel it will be fruitful if the students with academic background have a glimpse of the industry in order to have a better appreciation of practical applications of theory.
In this context, we would like to send two batches of students of III year B.E. Mechanical Engineering accompanied by two faculty members to visit your esteemed industry preferably on 17.07.2017 (Monday).
I request you to kindly accord the necessary permission for the above visit and arrange for guiding the students.
We assure you that our students will observe the rules and regulations that are prescribed by your industry for the visitors and will in no way disturb the functioning of the industry during
We shall be grateful to you for a favorable response. Herewith we have furnished the list of students and accompanying faculty.
their visit.
Thanking you,
PRINCIPAL
North Venganallur, Rajapalayam - 626 117, Tamil Nadu.Tel : 04563 233400, 233410; Fax : 233499
e-mail : [email protected], [email protected], www.ritrjpm.ac.in
Lin : U31200KL 1960 SGC 001860 ‘eoCTDeoofci ooco gonad’
(SD6<e6)D e< e> 6 n ilad a m j m l f i i l o l n o u , ( o i l o p ^ j
(003 ®m#<803«I nunfcumo)
TRACO CABLE COMPANY LIMITED( A KERALA GOVERNMENT COMPANY)
JFTC Factory, Chumathra, Thiruvalla- 689101, Pathanamthitta (Dist) Kerala.PH : 0469 - 2730231, 2730253 F a x : 0469 - 2630254 E-m ail: [email protected]
N o.22 /JF T C /S M / ) i 2- D ate: 17-07-2017
The Principal,Ramco Institute o f Technology,North Venganallur,Rajapalayam ,Tamil Nadu.
Sir,Sub .'-Factory Visit o f 3ld Year B.E M echanical Engineering
Students.Ref:- Y our letter N o.RIT/M ech/V Sem /Industrial V isit/
2017-18/02 dated 13-07-2017.
This is to certify that 66 students & 2 faculty m em bers o f 3rd Year B.E M echanical Engineering students o f your Institute had visited our factory on 17-07-2017. They have taken keen interest in understanding various process and m achineries in the factory.
’ * / N .C . N\Y ours faithfully,
For TRACO CABLE CO M PA N Y LTD.,
Uniti/ eTrrriinhiruvalla)
. Regd.office : XXVIII11242, KSHB office Complex,S S Panampilly Nagar, P.B.No. 4269, Cochin - 682036, Kerala
Phone: 0484 2314847, 230472 Grams : ' TRACO' Ernakulam, Fax: 0484- 2312744
o* C5QRINA ©
f V *OCl -20CM* M*fpQ -n C****rulo
RAMCO INSTITUTE OF TECHNOLOGYDepartment of Mechanical Engineering Academic Year 2017-18 (Odd Semester)
Class: V Semester B.E. Mechanical Engineering ’A’
Sl.No. Reg. No. Name of Student1. 953615114001 AJAYKIRUBAHAR G S2. 953615114002 AJAY RAJAPPAN S3. 953615114003 AJEETHKUMAR K4. 953615114004 AL AMEEN P S5. 953615114005 ANANDHARAJ S6. 953615114006 ARUL RAJ J7. 953615114007 ARUNKUMAR VK8. 953615114008 ASHOK BABU B9. 953615114009 BABUGANESHRAM S10. 953615114010 BALAKUMARESAN S11. 953615114011 BHARATH KUMAR R12. 953615114012 CHANDRA MOHAN P13. 953615114013 DAKSHINA MURTHY M14. 953615114014 DEIVA PRAKASH S15. 953615114015 DHALAPATHI G16. 953615114016 DHANUSHRAM R17. 953615114018 DIWAN AHAMMED SHA S18. 953615114019 FAIZOOR RAHMAN S19. 953615114020 GIRIDHARAN R20. 953615114021 GOBINATH M21. 953615114022 GOPAL RAJ S22. 953615114023 GOWRIS ANKAR M23. 953615114024 GOWTHAM M24. 953615114025 GOWTHAM CHAKARAVARTHI V25. 953615114026 GUNASEKARAMANI R26. 953615114027 HARI PRASATH K27. 953615114028 HARISHKUMAR P R28. 953615114030 HARSATH SAMUEL B R29. 953615114031 ILANCHERAN I30. 953615114033 JANANI SUDHA M D31. 953615114034 JEEVA GANESH C32. 953615114035 KALAISRIRAM S33. 953615114036 KALYANA SUNDARAM G34. 953615114037 KARELMARX MUTHIAH B35. 953615114038 KARPAGARAJAN P36. 953615114039 KARTHICK RAJ R37. 953615114040 KARTHIK K38. 953615114041 K A R T H IK M s f^ x
R .X ,T Page 1 of 2
3D2
Sl.No. Reg. No. Name of Student39. 953615114042 KARTHIKE Y AN N40. 953615114043 KARTHIKEYAN V S41. 953615114044 KATHIRESAN M42. 953615114045 KEERTHANA P43. 953615114046 KESAVAN R44. 953615114048 MANIKANDAN M45. 953615114049 MANIVIGNESH S46. 953615114050 MANOJ A47. 953615114051 MANOJKUMAR M48. 953615114052 MATHU SUDAN V49. 953615114053 MOHAMED MEERAN S50. 953615114054 MOHAMED YUSUFF S H51. 953615114055 MOHAN RAJ M52. 953615114056 MUGESHJAILSINGH R53. 953615114057 MUKESH ASWIN R54. 953615114058 MUKESH KUMAR T55. 953615114059 MUNIYARAJ K56. 953615114060 NARAYANAMOORTHI G57. 953615114061 NATARAJAN M58. 953615114062 NILAVARASU M59. 953615114301 AJITHKUMAR M60. 953615114302 ARUMUGAM A61. 953615114304 DINESH KUMAR M62. 953615114305 FAISAL U63. 953615114306 GANESH S64. 953615114308 MALAR MANNAN S65. 953615114309 MANIPRABHU R66. 953615114311 MARUTHANYAGAM S
FACULTY MEMBERS1. Mr.S.MAHARAJAN, AP/Mechanical2. Mr.M.SANTHANA MARUTHU PANDIAN, AP/Mechanical
G f • »~f*~
Class Advisor I HOD
PRINCIPAL
RAMCO INSTITUTE OF TECHNOLOGY
RA JAP ALA YAM - 626 117Department of Mechanical Engineering
Industrial visit report of I I I year Mechanical Engineering- “B ”
Faculty Coordinators:
Mr.S.Maharajan, AP/Mechanical
Mr.M.Santhana Maruthupandi, AP/Mechanical
Student coordinators:
Mr.Arun kumar(953615114007)
Mr.Mukesh kumar(953615114058)
Date: 17.07.2017 (Monday)
Place: TRACO CABLE COMPANY pvt limited,THIRUVALLAKERALA-689103
INTRODUCTION:
TRACO CABLE COMPANY, a Premier Kerala Government Company, commenced operations in the year 1964, manufacturing high quality Electric Cables and Wires in Technical Collaboration with M/s. Kelsey Engineering Co. Ltd., Canada. Since then TRACO has been in the forefront in meeting the needs of Public Sector Undertakings in India like Railways, Electricity Boards of various states in the country and others for AAC/ACSR, Power and Signaling Cables.
RAW MATERIAL:
• STEEL• ALUMINIUM
PRODUCTS:
Aluminium conductor steel-reinforced cable
ALUMINIUM STEEL REINFORCED CABLE:
(ACSR) is a type of high-capacity, high-strength stranded conductor typically used in overhead power lines. The outer strands are high-purity aluminium chosen for its excellent conductivity, low weight and low cost. The center strand is steel for additional strength to help support the weight of the conductor. Steel is higher strength than aluminium which allows for increased mechanical tension to be applied on the conductor. Steel also has lower elastic and inelastic deformation (permanent elongation) due to mechanical loading (e.g. wind and ice) as well as a lower coefficient of thermal expansion under current loading. These properties allow ACSR to sag significantly less than all-aluminium conductors. Per the International Electrotechnical Commission (IEC) and The CSA Group (formerly the Canadian Standards Association or CSA) naming convention, ACSR is designated A l/S l A.
PROCESS:
PACKING:
• The ACSR shall be supplied in wooden drums.• Drums shall be stoutly constructed of good quality timber or steel and
clearly marked with the length and type of conductor in manner not easily removable. Drums shall be securely battened around the perimeter and shall be lined with approved impervious material to prevent contact between the contents and both the drum itself and any chemicals with which the drum has been treated. Drums shall be suitable for rolling on the flanges without causing damage to the conductor and the direction of rolling shall be clearly shown.
• All timber drums and battens shall be protected from deterioration by termite or fungus attack by an approved impregnation treatment at the works before dispatch. Such substance shall not be harmful to the conductor.
LABELLING:■ Each drum shall be labeled with clear stencil on both sides of the drurft
with the following.• (a)CEYLON ELECTRICITY BOARD, TENDER NO :• (b)Manufacturer's name• (c)Direction of rolling• (d)Lifting instructions and limitations
■ The letters shall not be less than 75 mm of height and the ink used shall be waterproof.
■ An Aluminium name plate shall be fixed to each drum clearly showing the following.
• (a)Serial No.The serial numbers shall be from 001 onwards '• (b)Conductor type, material and stranding• (c)Length of the conductor• (d)Net Weight• (e)Gross Weight• (^Manufacturer's batch number• (g)Winding date• (h)Approximate measurements of the drum
QUALITY ASSURANCE:The manufacturer shall posses ISO 9001:2008Quality Assurance certification for the
manufacture of the ACSR conductor for the plant where the manufacture of conductor is done. The bidder shall furnish a copy of the ISO 9001:2008 certificates certified as true copy of the original by the Manufacturer, along with the offer.
)
Ramco Institute.of Technology Mail -Fw d: Requesting permission for ... https://rnail.google.com/rnail/u/0/?ui=2&ik=f29e062d59&jsver=3eczY..
. R A M C O
J j t n s t i t u t f , o f Maharajan S <[email protected]>T F C H N O I.O G Y
Fwd: Requesting permission for industrial visit on 28.07.2017 (Friday)1 message
Jerold John Britto J <[email protected]> Sat, Aug 19, 2017 at 2:12 PMTo: Maharajan S <[email protected]>
With Thanks and Regards J . Jerold John Britto AP/MECHRamco Institute of Technology Rajapalayam.Email Id : [email protected]
DID Y O U K N O W ?
, Z . G o digital - read, send and store digital documents
3. 3t* selective about what you print
4. Reach for the right paper
Muuaj 5. Recycle
- jS A V E PAPER S A V E T R E E S
Save Paper. Save Trees. Save the World.
Forwarded conversationSubject: Requesting permission for industrial visit on 28.07.2017 (Friday)
From: Valai Ganesh <[email protected]>Date: Thu, Jul 27, 2017 at 1:48 PMTo: [email protected]: Jerold John Britto J <[email protected]>
Sir,We are planning to visit your industry on 29.07.2017 (Friday). There are 50 students along with 2 faculty
members will visit your industry around 9.30am. So,we request your permission to visit your industry on Friday(29.07.2017).
Faculty Name and contact number - Mr.J.Jerold John Britto, AP/Mechanical (9843763682)
WITH REGARDS,S.VALAI GANESH M.E-CAD/CAMASSISTANT PRO FESSO RDEPARTMENT OF MECHANICAL ENGINEERINGRAMCO IN STITU TE OF TECHNOLOGYRAJAPALAYAM
From: Valai Ganesh <[email protected]>Date: Thu, Jul 27, 2017 at 1:51 PMTo: [email protected]: Jerold John Britto J <[email protected]>
1 o f 5 22-08-2017 11:22
Ramco Institute o f Technology Mail - Fwd: Requesting permission fo r . https://mail.google.com/mail/u/0/?ui=2&ik=f29e062d5'.
We are planning to visit your industry on 28.07.2017 (Friday). There are 50 students along with 2 faculty members will visit your industry around 9.30am. So,we request your permission to visit your industry on Friday(28.07.2017).
Faculty Name and contact number - Mr.J.Jerold John Britto, AP/Mechanical (9843763682)
WITH REGARDS,S.VALAI GANESH M.E-CAD/CAMASSISTANT PRO FESSO RDEPARTMENT OF MECHANICAL ENGINEERINGRAMCO IN STITU TE OF TECHNOLOGYRAJAPALAYAM
WITH REGARDS,S.VALAI GANESH M.E-CAD/CAMASSISTANT PRO FESSO RDEPARTMENT OF MECHANICAL ENGINEERINGRAMCO IN STITU TE OF TECHNOLOGYRAJAPALAYAM
From: Visu, Karthik <[email protected]>Date: Thu, Jul 27, 2017 at 2:02 PMTo: Valai Ganesh <[email protected]>Cc: Jerold John Britto J <[email protected]>, "M, Manoharan" <[email protected]>
Dear Mr.Valai Ganesh,
Greetings from Festo India!!!
/TS*k
Your students & faculties are cordially welcome to Festo, Bangalore for an Industrial Visit by tomorrow. Your visit request is approved. We have scheduled the session between 9.15 AM to 11 AM tomorrow.
For any clarifications or guidance, Your team can contact me.
Regards,
Karthik
Sr.Officer Marketing
2 o f 5 22-08-2017 11:22
xechnology Mail - Fwd: Requesting permission for ... https://mail.google.com/mail/u/0/?ui=2&ik=f29e062d59&jsver=3eczY...
Festo India Pvt Ltd | #237B, Bommasandra Industrial Area, Hosur Highway, Bengaluru 560 099. INDIA | M: +91 90080 13254 | Tel: +91 80 22894310 | Web: www.festo-didactic.com
“Festo Didactic - Your global partner for competence development’’
From: Valai Ganesh [mailto:[email protected]]Sent: Thursday, July 27, 2017 1:52 PM To: Visu, Karthik <karthik.visu@ festo.com>Cc: Jerold John Bri o J <[email protected]>Subject: Reques ng permission for industrial visit on 28.07.2017 (Friday)
From: Visu, Karthik <[email protected]>Date: Fri, Jul 28, 2017 at 2:26 PMTo: Valai Ganesh <[email protected]>Cc: Jerold John Britto J <[email protected]>, "M, Manoharan" <[email protected]>
Dear Mr.Valai Ganesh,
Refer to our discussion, Your students were reached Festo by 11.10 AM due to delay in their boarding & transportation. We started the session by 11.20 AM with welcome drink & snacks.
Following topics were covered,
0 Brief presentation on Automation & Introduction to Festo
0 Walk-in through Automation static & dynamic displays and brief explanation on applications
0 Demonstration & explanation on Pneumatic & Electro-Pneumatic Equipment’s
0 Videos on World Skills Competition & MPS
0 Demonstration & explanation on Mobile Robot
We hope that your students are benefited visiting Festo today. We wish you good luck for your prospective students and your organization.
Regards,
Karthik
Sr.Officer Marketing
22-08-2017 11:22
Ramco Institute o f Technology Mail - Fwd: Requesting permission for https://mail.google.com/mail/u/0/?ui=2&ik=f29e062u
F E S T O
Festo India Pvt Ltd | #237B, Bommasandra Industrial Area, Hosur Highway, Bengaluru 560 099. INDIA | M: +91 90080 13254 | Tel: +91 80 22894310 | Web: www.festo-didactic.com
“Festo Didactic - Your global partner for competence development”
From: Visu, KarthikSent: Thursday, July 27, 2017 2:02 PMTo: 'Valai Ganesh' <[email protected]>Cc: Jerold John Bri o J <[email protected]>; M, Manoharan <[email protected]> Subject: RE: Reques ng permission for industrial visit on 28.07.2017 (Friday)
Dear Mr.Valai Ganesh,
Greetings from Festo India!!!
Your students & faculties are cordially welcome to Festo, Bangalore for an Industrial Visit by tomorrow. Your visit request is approved. We have scheduled the session between 9.15 AM to 11 AM tomorrow.
For any clarifications or guidance, Your team can contact me.
Regards,
Karthik
Sr.Officer Marketing
F E S T O
Festo India Pvt Ltd | #237B, Bommasandra Industrial Area, Hosur Highway, Bengaluru 560 099. INDIA | M: +91 90080 13254 | Tel: +91 80 22894310 | Web: www.festo-didactic.com
*Festo Didactic - Your global partner for competence development’
From: Valai Ganesh [mailto:[email protected]]Sent: Thursday, July 27, 2017 1:52 PMTo: Visu, Karthik <[email protected]>
4 o f 5 22-08-2017 11:22
i.echnology Mail.- Fwd: Requesting permission fo r ... https://rnail.google.com/mail/u/0/?ui=2&ik=f29e062d59&jsver=3eczY...
Cc: Jerold John Bri o J <[email protected]>Subject: Reques ng permission for industrial visit on 28.07.2017 (Friday)
Sir,
We are planning to visit your industry on 28.07.2017 (Friday). There are 50 students along with 2 faculty members will visit your industry around 9.30am. So,we request your permission to visit your industry on Friday(28.07.2017).
Faculty Name and contact number - Mr.J.Jerold John Britto, AP/Mechanical (9843763682)
WITH REGARDS,
S.VALAI GANESH M.E-CAD/CAM
A SSISTA N T PROFESSOR
DEPARTMENT OF MECHANICAL ENGINEERING
RAMCO IN STITU TE OF TECHNOLOGY
RAJAPALAYAM
WITH REGARDS,
S.VALAI GANESH M.E-CAD/CAM
A SSISTA N T PROFESSOR
DEPARTMENT OF MECHANICAL ENGINEERING
RAMCO IN STITU TE OF TECHNOLOGY
RAJAPALAYAM
2 attachments
5 o f 5 22-08-2017 11:22
RAMCO INSTITUTE OF TECHNOLOGY, RAJAPALAYAM Department of Mechanical Engineering
Academic Year 2017-2018 (Odd Semester)
INDUSTRIAL VISIT - FESTO PRIVATE LIMITED, BANGALORE
(JULY 28- 29, 2017)
REPORT ON THE PROGRAMME
Final Year Mechanical Engineering ‘B’ of Ramco Institute o f Technology successfully
attended the industrial visit in FESTO Private Ltd, Bangalore during 28th, 29th July 2017.Fifty three
Students and two faculty members were attended Industrial Visit. Mr.Karthick (Senior Marketing
Officer, Festo Pvt., Ltd, Bangalore) handled the session with hands on training for the following
topics:
• Brief presentation on Automation & introduction about company.• Walk-in through Automation static & dynamic displays with brief explanation on applications• Demonstration & explanation on Pneumatic & Electro-Pneumatic Equipment’s• Videos on World Skills Competition & MPS• Demonstration & explanation on Mobile Robot.
Mr. J. Jerold John Britto AP/Mech Mr.S.Maharajan AP/MechMr.R.Vigneshwar AP/Mech
RAM CO IN STITU TE OF T E C H N O LO G Y
R E PO R T on Industrial V isit at
Bharath Earth M overs Lim ited, T ruck D ivision
M ysore
€ > b e m lN E W F R O N T I E R S . N E W D R E A M S
29th July, 2017
Industrial visit was carried out at Bharath Earth Movers Limited (BEML) Truck Division ont h29 July, 2017 especially for the final year students. The main objective behind the visit was to
make student aware about how various activities related to marketing, financing, manufacturing, assembling and human resource are carried out in the industry and give them feel of engineers as soon as the start there course.
There were nearly 53 students travelled to reach the industry at 12.00 P.M. The industry is located around 130kms from Bangalore which was established in 1986 with a total area of 600 acres. It is the one of the Asia’s biggest Dump Truck Factory in India located at Truck Division, Mysore.
As soon as we reached the company we were divided into two batches consisting of 26 students and 27 students how was guided by Mr.R.Venkatesh and Mr.J.Jabinth John for orientation of industry which was given by the four trainers of the BEML training department and their history. They also give some safety instructions for us.
It was great to know that the industry follows Japanese quality principal inside the working area. The dress code was followed strictly and trainers were given separate dress for them to wear. Their motto is “New Frontiers New Dreams”.
Vision o f BEM L:
To become a market leader, as a diversified company supplying products and services to Mining & Construction, Railway & Metro and Defense Services and emerge as an International Player.
M ission o f BEM L:
1. Improve competitiveness through organizational transformation and collaboration / strategic alliances / joint ventures in technology.
2. Grow profitably by aggressively pursuing opportunities in national and international markets.
3. Attract and build people in a rewarding and inspiring environment by fostering creativity and innovation.
Objectives:
1. To maintain a dominant position in design, development, manufacture and marketing of Defense, Earthmoving & Construction and Rail & Metro equipment.
2. To diversify and grow.3. To provide total engineering solutions to its customers.4. To internationalize operations by enhancing exports.5. To improve profitability.6. To maintain State-of-the-Art technology for all products.7. Re-orientation of the business operations to match present scenario.8. Continuous building of skills and competencies to bring about Executive Effectiveness for
Management Succession.
The products manufactured at Truck Division are:M ining & Construction:• Dump Trucks (Mechanical Drive)• Dump Trucks (Electrical Drive)• Water Sprinkler• Motor Grader
Defense:• Tatra 6x6 (Euro II)• Air Craft Weapon Loader
Others:• Air Craft Towing Tractor• Air Craft Towing Tractor with Ground Power Unit
M anufacturing Facilities:
• Dumper Assembly• Welding Robot• 5 Major Hangers
o Plate / Fabrication Shop o Machine Shop o Light Assembly o Major Assembly o Final Testing & Paint Shop
• Equipment Test Track• Tatra Hanger• 5 Ancillary Units
Central Test Laboratory - NABL Accredited:• To Ensure Quality of Conformance, Precision Measuring, Test Equipment's and their
Calibration• Having Facility for Testing of Materials, Castings, Forgings, Raw Materials, Oils and Paints
Rubbers• Test Facility include Mechanical Tests, Chemical Analysis, Mctallographic, Radiography,
Ultrasonic Testing, Magnetic Particle Inspection and Dye Penetrant Testing• Metrology & Gauge Calibration is having facility for Calibration of Precision Measuring
Instruments - Co-ordinate Measuring Machine, Form Tester and Surface Tester• Sophisticated test cell for performance of Engines & Endurance Testing of Components,
Injector Tester and FIP Calibration Bench
We had a great opportunity to see the industry vision, mission and their products like BH205E, Tatra and many earth movers. They used the Japanese technology halpaco. They have a separateg ro u n d fo r te s t in g th e i r p ro d u c ts . T h e y w e re d e s ig n in g a n d m a n u f a c tu r in g s o m e In d ia n M is s i le s lik e A k a sh . T h e y fo l lo w e d th e s u b a s s e m b ly a p p ro a c h fo r th e i r d u m p e r p ro d u c t m a n u f a c tu r in g u n it . T h e y h a d n e a r ly 4 u n i ts s e p a r a te ly fo r m a n u f a c tu r in g th e p a r ts fo r th e d u m p e r s , ta t r a .
They have a special division for manufacturing the engine attached with quality checkup lab. They nearly buy 80% of products from local vendors of India and 20% of products from various countries like Japan, Germany, USA, etc. They even manufacture train coaches for India.
It is rightly said that “See & know’ is better than ‘read & learn’. Students have got real feel of company’s working after this visit. They got a chance to transfer their theoretical knowledge to practical implication. This will even help students to understand subject matter clearly in future also. We would like to extend our gratitude to company for permission and support they gave to make our visit a success with accomplishment of objective and our class advisor Mr. P. Suresh Kumar for arranging this visit for our student.
Thank You
\ RAMCOi n s t i t iTT,O F SELV A SU N D AR <selvasundar@ ritrjpm.ac.in>T F C I IN O I .O G Y
2 8 /0 6 /2 0 1 8 R a m c o Institute o f T e c h n o lo g y M ail - F w d : In d u stria l V is it - R e g .
Fw d: Industrial Visit - Reg.
Suresh Kumar P <[email protected]> Thu, Jun 28, 2018 at 12:04 PMTo: Selvasundar <[email protected]>
Forwarded m essage----------From: Rajakarunakaran S <[email protected]>Date: Mon, Jun 4, 2018 at 1:00 PM Subject: Re: Industrial Visit - Reg.To: "Inigo Jeganath_A_RRN [Dy.Manager- HR]" <[email protected]>, Karthikeyan G <[email protected]>, Suresh Kumar P <[email protected]>, KARTHIKEYAN L <[email protected]>, "Selvaraj K.S" <[email protected]>
Respected Sir,
Based on the revised Anna University Schedule and discussion with HOD/Civil & respective class advisers, we are ^ planning to visit our organisation as per the schedule given below:
08.06.2018 (Friday): Civil Engineering (27 boys & 24 girls)29.06.2018 (Friday): Mechanical Engineering (Section A: 57 boys)06.07.2018 (Friday): Mechanical Engineering (Section B: 53 boys)
We are expecting your approval at your earliest convenience. Accordingly we will proceed transport arrangements from our college.
We also request you to kindly arrange Lunch to our students and accom panying faculty members on payment basis as per our organisation norms.
with kind regards
On Tue, May 15, 2018 at 3:42 PM, Inigo Jeganath_A_RRN [Dy.Manager - HR] < [email protected]> wrote:
Dear Sir,
Greeting from The Ramco Cements Limited, R R Nagar.
With reference to your request letter no RIT/Mech/ll Sem/lndustrial Visit/2017-18/01 dated 10.05.2018 for industrial visit, Please note that Industrial visit to your Mechanical & Civil engineering students is approved. As discussed with you, kindly plan for industrial visit on any Friday as we have a system of allowing industrial visits only on Fridays.
Thanks & Regards
Inigo Jeganath
Human Resources
9894925682
https://mail.google.com/mail/u/0/?ui=2&ik=4c005a3d99&jsver=6HPtoh-TLvo.en.&cbl=gmail_fe_180624.14_p1&view=pt&msg=164451965e2a57e6&se. 1/2
RAMCO INSTITUTE OF TECHNOLOGY(Approved by AICTE - New Delhi and Affiliated to Anna University - Chennai)
An ISO 9001:2015 certified institution
Date: 10.05.2018 .
Lr.No. RIT/Mech/II Sem/Industrial Visit/2017-18/01
ToThe PresidentThe Ramco Cements limited R.R.NagarVirudhunagar - 626204.
Dear sir,
Sub: Permission for Industrial Visit - 1 year MECH (Section A&B -110 students) and Civil Engineering (52 students) - 6 Faculty Members - Reg.
I wish to inform you that, as a part of the curriculum, all students are required to undertake Industrial Visits to a few Industries of repute. We feel it will be fruitful if the students with academic background have a glimpse of the industry in order to have a better appreciation of practical applications of theory.
In this content, we would like to send two batches of about 162 students of I year B.E. Mechanical and Civil engineering accompanied by six faculty members to visit your esteemed industry' preferably on 2*9.05.2018 (Tuesday).
I request you to kindly accord the necessary permission for the above visit and arrange for guiding the students.
We assure you that our students will observe the rules and regulations that are prescribed by your industry' for the visitors and will in no way disturb the functioning of the industry during their visit.
We shall be grateful to you for a favorable response. Herewith we have furnished the list of students and accompanying faculty.
Thanking You,
Yours Faithfully
HoD/Mechanical HoD/Civilj •
Principal
150*001:201$
IO 9108633093
North Venganallur. Rajapalayam - 626 117. Tamil Nadu.T e l: 04563 233400. 233410; Fax : 233499
e-m ail: [email protected], [email protected], www.ritrjpm.ac.in %■
RAMCO INSTITUTE OF TECHNOLOGY Department of Mechanical Engineering
Academic Year: 2017-18 (Even Semester)
Semester/Class: II Semester B.E.Mechanical Engineering A
S.No. Reg. No. Name of Student1. 953617114001 AAKASH K2. 953617114002 ABISHAKE P3. 953617114003 ADH1THYA VISHNU KUMAR M4. 953617114004 AJITHS5. 953617114005 ANANTHAJOTHI A6. 953617114006 ARAVJND S7. 953617114007 ARAVINDH M8. 953617114008 ARI KRISHNAN P9. 953617114009 ARUNACHALAM Sto. 953617114010 ARUNKUMAR P11. 953617114011 ASIM AHAMED I12. 953617114012 ASWIN V R13. 953617114013 BALAJI S14. 953617114014 BHARATH KUMAR J15. 953617114015 BHOOT HA LIN GAM PILLAI E16. 953617114016 CHANDRUD17. 953617114017 DEEPAK KUMAR V18. 953617114018 DEEPAK VISHNU M19. 953617114019 DINESH M20. 953617114020 DINESHKUMAR M21. 953617114021 DINESH KUMAR R22. 953617114022 ESAKKI S23. 953617114023 ESAKKIESWAR S24. 953617114024 GANESHKUMAR S25. 953617114025 GOKULPRASATH N26. 953617114026 GURU BALAJI M27. 953617114028 HARIKUMARAN M28. 953617114029 HARI NARAYANAN S29. 953617114030 JOHN STALIN S30. 953617114031 JOTHIKRiSHNA V31. 953617114032 KALAIPRABHU S32. 953617114033 KARANKUMAR G33. 953617114034 KARTHEESWARAN V34. 953617114035 KARTHICK M35. 953617114036 KARTHIKEYAN B36. 953617114037 KARTHIK KUMAR A37. 953617114038 KA SIVIS WANATHAN S38. 953617114039 KISHORE G V39. 953617114040 KRISHNA KUMAR S40. 953617114041 KRISHNA MOORTHY K41. 953617114042 LAL KRISHNA S L
S.No. Reg. No. Name of Student42. 953617114043 MADHANA43. 953617114044 MAHADEVANNP44. 953617114045 MAHARAJAN S45. 953617114046 MAHENDRARAJ V46. 953617114047 MAHESHWARAN G47. 953617114048 MAN IK AND AN G48. 953617114049 MANOJ C49. 953617114050 MANOJ P50. 953617114051 MANOJ KUMAR R51. 953617114052 MANOJKUMAR R52. 953617114053 MATHANRAJL53. 953617114054 MOI1AMEDABRAR I54. 953617114055 MOHAMMED JALAL AZEEZ D55. 953617114056 MUKESH G56. 953617114057 MUTHU KRISHNAN K57. 953617114058 MUTIIU VENKATESH T
A REPORT ON IND U STR IA L VISIT TO RAM CO CEM EN TS, RR NAGAR
Faculty Coordinator(s): T .Selva Sundar & R .Venkatesh A P/M ech
Students of 2nd year BE Mechanical Engineering ‘A ’ were taken to Ramco Cements RR
Nagar branch as an Industrial Visit on 29th of June 2018. During the visit, the students were
given an introduction about the plant and the safety precautions to be taken while being inside
the plant. The students also visited various section of the industry.
First, The students were taken to the Common Control Room where the whole process of
the plant is being monitored by the engineers. The students were told about how the Control
Room works and how faults in any part o f the plant is detected from the Control Room. Next,
The students were taken to the VRM (Vertical Roller Mill) where the particles are grinded to
extremely fine particles. The operation of the VRM was explained to the students clearly.
Later, the students were taken to the Kiln Mill which is a long cylindrical container which
rotates about its axis; the rotation helps the particles to move from the cold end to hot end at
which a burner is fixed. Then the Cement grinding section was shown to the students followed
by the packing section where the process of packing was explained and shown. The students
were told that each bag contains 50 kg o f cement. After the visit, Lunch was provided to the
students by the Ramco Cements management thus the visit ended thereby.
p p .
RAMCO INSTITUTE OF TECHNOLOGY(Approved by A lC TE - New Delhi and Affiliated to Anna University - Chennai)
An ISO 9001 2015 certified Institution
Date: 29/07/2017To
The Managing Director,Traco Cable Company,Pathinamithitha District.Thiruvalla,Kerala - 689 108
Sir,Sub: Permission for Industrial V isit- IV' Year EEE - 71 students - Reg.
I w ish to in fo rm y o u th a t , a s a p a rt o f the c u rr ic u lu m , a ll s tu d e n ts a re req u ired to
u n d e rta k e In d u s tria l V is its to a few in d u s tr ie s o f rep u te . W e fee l it w ill b e f ru itfu l i f th e s tu d e n ts
w ith a c a d e m ic b a c k g ro u n d h a v e a g lim p s e o f th e in d u s try in o rd e r to h a v e a b e t te r a p p re c ia tio n
o f p ra c tic a l a p p lic a tio n s o f th e o ry .
In th is c o n te x t , w e w o u ld lik e to se n d a batch o f a b o u t 71 s tu d e n ts o f IV y e a r B .B .
E lec tric a l an d E le c tro n ic s E n g in e e r in g a c c o m p a n ie d by tw o fa c u lty m e m b e rs to v is it y o u r
e s te e m e d in d u s try p re fe ra b ly o n 0 7 .0 8 .1 7 (M o n d a y ).
I re q u e s t you to k in d ly a c c o rd th e n e c e ss a ry p e rm iss io n fo r th e a b o v e v is it an d a r ra n g e
fo r g u id in g th e s tu d e n ts .
W e a s s u re you th a t o u r s tu d e n ts w ill o b se rv e the ru le s an d re g u la tio n s th a t a re p re sc rib e d
by y o u r co m p an y fo r th e v is i to rs an d w ill in n o way d is tu rb th e fu n c t io n in g o f th e co m p an y
d u rin g th e ir v is it.
W e sh a ll b e g ra te fu l to y o u f o r a fa v o ra b le re sp o n se . H e re w ith w e h a v e fu rn ish e d th e lis t
o f s tu d e n ts a n d a c c o m p a n y in g fa c u l ty .
r _
PRINCIPAL
Thanking you.
Yours faithfully,
HoD/EEE
ISO 9001.2015 IO 9 1 0 8 W 3 0 9 J
Norm Venganallur. Ra|apalayarn 62.6 117 Tarril N.ntu Tel 04563 233400 233410. Fax 233400
e-mail ru rjpVn.office@gmait com rit qpmiti/gmaii.com, www.ntripm.acdn
Ramco Institute o f Technology Mail - Fwd: Requeting Industrial Visit for Final Year Electrical and Electronics Engineering Students -Ramco I..
R A M C O
fKSTTTt rr or KannanSubram anian S < [email protected]>T r r i l N O f O G Y
Fw d: Requeting Industrial Visit for Final Year Electrical and Electronics Engineering Students -R a m co Institute of Te ch n o lo g y
Suresh Kumar P <[email protected]> Wed, Aug 2, 2017 at 4:03 PMTo: [email protected]
Forwarded m essage-----------From: T R A C O C A B LE TH IRUVALLA <[email protected]>Date: Wed, Aug 2, 2017 at 2:52 PMSubject: Re: Requeting Industrial Visit for Final Year Electrical and Electronics Engineering Students -Ramco Institute of TechnologyTo: Suresh Kumar P < [email protected]>
Dear Sir,
Permission is granted for 71 students and 2 faculty members of your firm for an Industrial visit on 07-08-2017(Monday). The fees for the visit is Rs. 3500 /-
Regards
Officer (P&A)
On Sun, Jul 30, 2017 at 1:38 PM, Suresh Kumar P <[email protected]> wrote:Dear Sir
Here I attached a letter for Requesting Industrial Visit for Final Year Electrical and Electronics Engineering Students. Please give permission to visit your factory in order to learn more about practical application.
h ttps://m ail.googIe .com 'm ail/u /I/?u i= 2& ik= 244bO bft)b& jsver= lK ukm JV E M C A .en .& view = pt& m sg= 15da282042d537f5& search= inbox& si.
'cgrasrrxsor.?! 'aocujjcso^ '
( s o G c e n o Q c Q i s m \ a i a > c n i o ) l e f l a ) o a u > ’
/TVTR A C O ■ CABLE
wIRIMPANAM, TRIPUNITHURA, Dist. ERNAKULAM , PIN: 682 309Phones: 0484 2780937, 2780237, 2785672, Fax: 0484 2780937
No. ISAAKS/ 110 Irimpanam 07.08.2017
CERTIFICATE
This is to certify that 71 Nos. of IVth year BE Electrical and Electronics Engineering students along with 2 staff members of Ramco Institute of Technology, North Venganallur, Rajapalayam, Tamil Nadu - 626 117 have undergone an Industrial visit in this institution on 07.08.2017 F.N.
Factories:Pinarayi - 670742, Dist. Kannur Ph : 0490-2384161. Fax 0490-2384761 Thiruvalla-689 103, Dist. Pathanamthitta
Phones : 0469-2730231, 2730391 & 2730253, Fax : 0469 2630254 (TVLA)
For TRACO CABLE COMPANY LIMITED
Regd. Office; XXXIX/5465,4th Floor, K S H B Office Complex, Panampilly Nagar, Kochi - 682 036, KeralaPhones: 0484 2314847, 2314864, 2311851 & 2320472 Fax 91-484 2312744
E-m ail: [email protected], Web : www.tracocable.com
m
ThACO CABLE COMPANY LIMITED(A Kerala Government Company)
Irimpanam, Ernakulam (Dist.) Pin - 682 309DateNo 6 1 7 0 Date :Q.
cReceivedwith thanhsfrom Q............ j.,10>CS.I/.ICJ...UCT.. /f........£?..ET.......
f T .& C J d M .Q . . . .L Q .A y . . . .x . ? .....................................
the sum o f Rupees .7^1. .V.~. C^.c/.. ...........y^A^rlrr...
...h ^ d ..£ C * y & /.. paise ........ (<Rj. <Ps. .S>Jg.....)
onCy 6y Cash / MO./Cheque /d )ra ft / <PostaCOrder Mo.........................................................
dated.. on ...................................... towards.
\ M c /.E k z % !Z ..........
Cheque subject to realisation Accountant
For TR A C O C A B LE COM PANY LIMITED
Officer (F Divisional Manager
RAMCO INSTITUTE OF TECHNOLOGY. A( Approved by A lC TE - New Delhi and Affiliated to Anna University - Chennai) An ISO 9001:2015 certified Institution
ISO 9001 2015
10 9108623093
Date: 11/07/2017I'o01) ELECTRICAL EQUIPM ENTS,S F .N o .2 2 3 /1, N e th a ji N ag ar,
N an jundapu ram R oad ,
N an jundapuram Post,
Coimbatore - 641 036.Mobile: 98422 78144.
Sul): Perm ission for Industrial Visit - III Year EEE - 6 2 students - Reg.
un d ertak e In d u s tr ia l V is its to a few in d u s tr ie s o f rep u te . W e fee l it w ill b e fru itfu l i f th e s tu d e n ts
w ith a c a d e m ic b a c k g ro u n d h av e a g lim p s e o f th e in d u s try in o rd e r to h a v e a b e t te r a p p re c ia tio n
o f p rac tica l a p p lic a tio n s o f th e o ry .
In th is c o n te x t , w e w o u ld like to sen d a ba tch o f a b o u t 62 s tu d e n ts o f III y e a r B .F .
E lec trica l a n d E le c t ro n ic s E n g in e e r in g a c c o m p a n ie d by fo u r fa cu lty m e m b e rs to v is it y o u r
e s teem ed in d u s try p re f e ra b ly o n 1 5 .0 7 .1 7 (S a tu rd a y ) .
I re q u e s t y o u to k in d ly a c c o rd th e n e c e s s a ry p e rm is s io n fo r th e a b o v e v is it a n d a rra n g e
for g u id in g th e s tu d e n ts .
W e a s s u re y o u th a t o u r s tu d e n ts w ill o b se rv e th e ru le s a n d re g u la tio n s th a t a re p re s c r ib e d
by y o u r c o m p a n y fo r th e v is i to rs a n d w ill in no w ay d is tu rb th e fu n c t io n in g o f th e c o m p a n y
d u rin g th e ir v is it.
W e sh a ll be g ra te fu l to y o u fo r a fa v o ra b le re sp o n se . I le re w lth w e h a v e fu rn ish e d th e list
o f s tu d e n ts a n d a c c o m p a n y in g facu lty .
Sir,
I w ish to in fo rm y o u th a t , a s a p a rt o f th e c u r r ic u lu m , a ll s tu d e n ts a re re q u ire d to
T hanking you.
Yours faithfully
PRINCIPAL
jorth Vonqanallur "tofapftiayam 626 117. Tamil Nadu Tel ijnAb J- 23 <4tiQ. 2134 10. Fax 233499
Ujit) ofTiotmTqrriail com rtl ripiTUctxiinail com. wwvv ritfipm AC in
G.D. ELECTRICAL EQUIPMENTSS.F. NO. 223/1, N ETH AJI NAGAR. NANJUNDAPURAM ROAD,
NANJUNDAPURAM POST, COIM BATORE - 641 036.Manufacturers & Suppliers of Electrical & Electro Mechanical Machines.
Control Equipments.
GVD/OL/2/2017 -18 12.07.2017
-
GVD
To,
The Principal,M/s. Ramco Institute o f Technology,North Venganallur Village,Krishnapuram Panchayat,Rajapalayam - 626117.
Dear Sir,
S u b : In d u s tr ia l v is it o f y o u r s tu d e n ts on 1 5 .0 7 .2 0 1 7 R e f: Y o u r le t te r N o . N il d a te d 1 1 .0 7 .2 0 1 7
W ith re fe re n c e to th e a b o v e w e a re g la d to p e rm it a b a tc h o f a b o u t 62 s tu d e n ts o f y o u r 111
y e a r E le c tr ic a l A n d E le c tro n ic s E n g in e e r in g a c c o m p a n ie d by fo u r f a c u l ty m e m b e rs fo r an in d u s tr ia l v is it
to o u r fa c to ry o n 15 .07 2 0 1 7 (S a tu rd a y ) .
Thanking you with kind regards.Yours faithfully,
For G.D. Electrical Equipments,
' G. Durairaju. B.E.Proprietor.
Phone : 0422 - 2322443 Fax : 0422 - 2322444 Mobile : 98422 - 78144. 98428 - 78144 E-m ail: [email protected] Website : www.gdelectricalequipments.com
RAMCO INSTITUTE OF TECHNOLOGY f A(Approved by A IC TE - New Delhi and Affiliated to Anna University - Chennai) An ISO 9001:2015 certified Institution
IS O 9001:2015
ID 9108633093
Date: 10.05.2018
To
THE PRESIDENT,RAJAPALAYAM MILLS,Post Box No. 1 P.A.C.Ramasamy Raja Salai,Rajapalayam -6 2 6 117
Respected Sir,
Sub: Permission for Industrial Visit - I Year EEE - 51 students - Reg.
I wish to inform you that, as a part of the curriculum, all students are required to undertake Industrial Visits to a few industries of repute. We feel it will be fruitful if the students with academic background have a glimpse of the industry' in order to have a better appreciation of practical applications o f theory.
In this context, we would like to send a batch of about 51 students of 1 year B.E. Electrical and Electronics Engineering accompanied by two faculty members to visit your esteemed industry preferably on 30.05.18 (Wednesday) from 02.30 PM to 05.00 PM.
I request you to kindly accord the necessary permission for the above visit and arrange for guiding the students.
We assure you that our students will observe the rules and regulations that are prescribed by your industry for the visitors and will in no way disturb the functioning of the company during their visit.
We shall be grateful to you for a favourable response. Herewith we have furnished the list of students and accompanying faculty members.
Thanking you,
Yours faithfully
PRINCIPAL
North Venganallur, Rajapalayam - 626 117. Tamil Nadu.T e l: 04563 233400, 233410: Fax • 233499
e-mail . rit.rjpm.offit e@ gm ail.com , [email protected], www i itrjpr i.ac.in
SRI VISHNU SHANKAR MILL LIMITED
CINPANGSTIN
16.05.2018
The PrincipalRamco Institute of Technology,North Venganallur Viiiage,Rajapalayam.
Dear Sir,
Sub: Permission for Industrial Visit - reg
This has with reference to your letter dated 10.05.2018, regarding your EEE
students' visit to our factory. We pleased to inform you that we are permitting
your students to visit our units on 30.05.2018 (Wednesday) between 2.30 pm to
5.00 pm, in our Mills.
Thanking you
For Sri Vishnu Shankar Mill Limited
^ , < p V --------------
V.RajuVice President-Technical
(Government of India Recognised Export House)Regd. Office : Sri Vishnu Shankar Mill Premises, Post Box No. 109,
P.A.C.Ramasamy Raja Salai, Rajapalaiyam - 626 117,Tamil Nadu, India. ,U17301TN1981PLC008677 Telephone : 91 4563 235552-55 (4 Lines)
AACCS0536Q Fax : 91 4563 23649333AACCS0536Q1Z7 E-mail : [email protected]
s v s m i l l @ b s n l . i nWebsite : www.vishnushankarmill.co.ln
RAMCO IASI 1 n I t o t t I CHNOMMO * R U v F VI AV \ M
R E O l t . M t.NG P E R M IS S IO N r O K U I U iA N l / j N l i I N 0 1 V I R I A L \ 1s t 1 lM ) U 5 i i 1U A L T l tV ifH lN t,*
h f t l e : Iffl
Submitted to the Princtra1.
Department Electronics alui ColttiiUtuieafiuh EftgifffcfcHHg
YearSem esterN ectwm : IVA ll h
Class strength : 44
Plroposdl industries lot v is i t :
1. Hindustan \eronauties I united. Ileugalutu. Katlutlaka.2. I nthu feehnologv Solutions India Pvt. I Hi. IkMigflltitth Kurnalaka
Proposed period of Industrial \ t it I 0.06.201 ft
Reason Justification for organising Industrial visit (IV ) Industrial Training (IT)
• Visiting \jtriou> industries U & l) organizations will enrich and upgrade (lie knowledgeabout the latest technological advancements practiced in (licit premises and enhancethe skills of the students.
« Accomplishing the outcomes sueh as• I. Recognizing the various process units
2. I dent ifv ing input and output of the process } . Observing the importance of safely and quality4 . E x p l a i n i n g t h e c o n c e p t s a n d p r i n c ip l e s
5. Expo sing to the real-time applications6. Exploring huiustry'-Institute Interaction for student internships, student careet
opportunities, curriculum dcvclopincnl o f special courses to till the etuiimilar
gap. arranging export lecture and funded research and consultancy projects,
Note:* Faculty Coordinator 1 1V 1 1) and Class Advisor arc informed to follow the general
guidelines for organising Industrial Visit/Industrial Training,
• Students and Accompany ing lacultv members arc instructed to observe the IV / iT R U LE S A N D R HA A LA IIO A S FOR S K 'DENTS/ACX 'O M PAN YIN O FAC ’U iT Y
M EM BER p
q G\ ] w ' c S V n . u V *Faculty Coordinator 1 1 \ i l l C ‘lassv\dvisor IIO D/ECH1
Permission graiucddtnt granted
, fto I ' \-V dT V m PR INCH PAL
Form No. CO04 Rev,No. 00 Effective IK 01,5016
RAM CO INSTITUTE OF TECHNOLOGY
DEPARTM ENT OF ELECTRONICS A N D COM M UNICATIO N ENGINEERING
S C U F in 1 t: FOR i x d c s t r i vl M SI 1
IK.06.2018
T h e Department o f L 'C F Association ( R I T -E L F C T R O N I C A ) has arranged an
Industrial \ isit to "H industan Aeronautics Lim ited and Lnthu technology Solutions India
Private I united, Bengaluru* Karnataka" from 10.0 6 .20 IK (Tuesday) to 2 1.0 6 .2 0 IK
( Thursday) for IV year E C E B section students.
Itiueran
D ater » x %
1 une Activities5.30 PM Start from R l T Cam pus
18 .00 ,2018[ ! 7.30 PM Dinner
| 6.00 A M Reach Hotel Taiba Regency
8.00 A M Break fast
0.30 A Mj uwitnrnj 1 -»U - i i i . r
V is it Lnthu Lechnology Solutions India Pvt. Ltd.Bengaluru. Karnataka
1^.0 6.20 18 t .00 PM LunchI|
2.00 PM V is it M ysuru Palace
6.30 PM Reach Hotel Taiba Regencyi
7.30 PM D innerj
1 8.00 A M Breakfast•
1 0.30 A M V is it Hindustan Aeronautics I united. Bengaluru. Karnataka
j 20.0 6.20 18LOO PM Lunch
1.30 PM V is it Brindavan Cardens
6.00 PM Reach 1 lotel Taiba Regency
7.30 PM Dinner
8.00 A M Breakfast
10.00 A M V is it W onderl a Theme Park, Bengaluru
2 1.0 o .20 tK LOO PM Lunch
6.00 PM Start from Bengaluru
7.30 PM D inner
2 2.0 6 .20 18 6.00 A M Reach RIT Campus
• - \ s VFaculty ht-cli
*
nr<*e n t iru i l ’ vi.
"aI
KKQI ESTfNQ PERMISSION FOR O RGANIZING r\T)I STRIAE VISIT/INDUSTRIAL TRAINING
KAMCO INSTITUTE O f TECHNOLOGY, RA.IAPALAYAM
Date: 18.05.2018
Submittal to Oic Pr me j pal:
Department
Y ca r/Semcster/Section
(la ss strength
Electronics and Communication Engineering
I/ II/B
52
Proposed industries for visit :
1. KAMCO Group Textile Division. Rajapalayam.
Proposed period o f Industrial visit : 30.05.2018
Reason/Justification for organizing Industrial visit (IV)Tndustrial Training (IT):* Visiting various industries/R&D organizations will enrich and upgrade the knowledge
about the latest technological advancements practiced in their premises and enhance the skills of the students.
* Accomplishing the outcomes such as1. Recognizing the various process units2. Identifying input and output of the process3. Observing the importance of safety and quality4. Explaining the concepts and principles5. Exposingto the real-time applications6. Exploring Industry-Inslitute Interaction for student internships, student career
• Faculty Coordinator (I V/IT) and Class Advisor are informed to follow the general guidelines for organising Industrial Visit/Industrial Training.
• Students and Accompanying faculty members are instructed to observe the IV /IT
opportunities, curriculum development of special courses to fill the curricular gap. arranging expert lecture and funded research and consultancy projects.
Note:
R U LES AND R EG U LA TIO N S FO R STU DEN TS/ACCO M PAN YIN G F A C U LT YM EM BER
Faculty Coordinator (I V/IT)/ ^ ’T « 0 £
Permission granted/iiot-gr-antecM
Form No, CQ04 Rev .No. 00 Effective Date: 18.01.2016
UYi . n i P E R M IS S IO N E U R P R O v . M / j V l
i \ m STRIAE V h l T I MH >I RI \ L TRAl V N U
Dma: IT ;}5 _v . f
Submitted tp the Principal:
Department : Electronics and Cornnnimearion: EnghnsmaM:
Year Semester Section : L'II;A
Class strength : 52
Proposed industries for visit :
I. RAMCO Group Textile Division. Rajapalayam.
Proposed period o f Industrial visit : 30.05.2018
Reason Justification for organizing Industrial visit (ivyIndustrial T rain ing«IT/:* Visiting various industries, R&D organizations will enrich and upgrade the kno'W’edge
about the latest technological advancements practiced in their premises and enhance the skills o f the students.
• Accomplishing the outcomes such as1. Recognizing the various process units2. Identifying input and output o f the process3. Observing the importance o f safety' and quality4. Explaining the concepts and principles5. Exposingto the real-time applications6. Exploring Industry-Institute Interaction for student internships, student career
opportunities, curriculum development o f special courses to Gil the curricuiar gap, arranging expert lecture and funded research and consultancy protects.
Note:* Faculty Coordinator (IV/IT) and Class Advisor are informed to follow, the general
guidelines for organising Industrial Visit Industrial Training.• Students and Accompanying faculty members are instructed to observe the T T f
R U L E S A N D R E G U L A T IO N S FO R S T U D E N T S A C C O M P A N Y IN G FACT IT T M E M B E R , __ N
Faculty Coordinator (I V/IT) Class Advisor HOD; Inofearge
RAMCO INSTITUTE OF t e c h n o l o g y . h u . \ * \ l a \ a m
Permission granted/not granted-
Form No. CO04 Rev .No. 00 Effective Date: i$-01 3M0
RAM CO INSTITUTE OF TECHNOLOGY, RAJAPALAYAM
DEPARTM ENT OF COMPUTER SCIENCE AND ENGINEERING
Academic Year 2017-2018
Industrial Visit at Rajapalayam Mills Limited, Rajapalayam
Date: 28.05.2018
Branch/Year/Semester/Section: B .E C S E /I Year/ II Semester Bate o f Industrial visit: 28.05.2018
Details of Industries to be visited (attach industry permission letter):1. Rajapalayam M ills Lim ited, Rajapalayam
Accompanying Faculty members:1. M s.G.M ahalakshm i, A P /C S E2. M s.S.M anjula, A P /C S E3. M s.P.Jothi Thilaga, A P /C S E
ABOUT THE INDUSTRY:Rajapalayam M ills Ltd. established in 1938, with 6800 Spindles imported from England.
Rajapalayam M ills today produces 11 m illion kgs o f yam per year, employs more than 1000
workers and has a turnover o f over R s.18 18 m illion. Acknowledged as the most efficient
spinning m ills in the industry. Rajapalayam M ills has set the industry standard for quality and
price in cotton yarn manufactured with a production increase o f about 4 0 % purely through
modernization.
Product range o f the company includes:R ajap alayam M ills Ltd is engaged in manufacture and sale o f yam s
. R in g Y a m (Ne) - 30/1 to 120 /1
• Com pact Y a m (Ne) - 30/1 to 140/1
• E litw ist Com pact Y a m (Ne) - 40/2 to 200/2
• T F O D oubled Y a m (Ne) - 40/2 to 160/2
. Gassed Y a m (N e) - 40/2 to 220/2
. S lu b & M ulticount Y a m ( N e ) - 1 6 s to 94s
. M odel / Tencel Y a m (Ne) - 20s to 40s
. O E Y a m (N e) - 4s to 20s
. O rganic Cotton Y a m - 30s to 60s
Session:
Two staff members from the industry explained us about the terms and condition of their industry, where they are importing their raw material and how they are manufacturing the products.
The students where splitted into two groups and the staff members took the students around the company to explain about the manufacturing process. They explained each process in detail how the raw cotton is turned into yarn.
1 fiber delivered to the spinning T o begin the spinning process, the c o m p r e s s e d staple ^ ^ by r e m o v i n g
phtnt is unraveled using a mixing and blowing mac staple fiber is processesubstance such as leaves, seeds, or sand adhering to it. m ixing and b low ing process is into sheet-shaped lap. The sheet-shaped lap processe in e ^ rsmowc fine dust and short
combed using the carding machine to separate the 1 collected to be p rocessed intofibers. Remaining long fibers are aligned nearly parallel anthe string-shaped "carded sliver."
The carded sliver is further combed to remove short fibers and dust that could not be removed in the carding process. Fibers are then arranged parallel to obtain uniform combed sliver. This process is essential to manufacture uniform, high-quality yam. Six to eight slivers after the carding or combing process are gathered and elongated to six to eight times their original length using a drawing machine to straighten and remove uneven thickness from the fibers. This process transforms fibers into string-like "drawn sliver.Twisting is first applied to fibers in this process to obtain the yam, which is wound onto a bobbin.
In the fine spinning process, the last o f the main spinning processes, the yam resulting from the roving process is further elongated to obtain a desired thickness and then twisted. The final product, or the finished yam, is wound on a bobbin. The winding process involves rewinding the finished yam onto bobbins into the cheese or cone according to its purpose. Finally, the manufactured yam is inspected and folded. Imperfections are corrected as required. The yam is packed in a manner appropriate to the shipping conditions.
fifT » U (T d » 61T U ]lfl 100) 6*0 6010Q U 1r a j a p a l a t a m m i l l s lim itedU « « T « f - #011 - P l .A T lN im .........
SUMMARY:
The purpose ot conducting the industrial visit is to make students to enrich and upgrade the knowledge about the latest technological advancement practiced and enhance the skills ofthe students.
I would like to thank our facilitators Dr.k.Vijayalakshmi, HOD/CSE for motivating us to attend such industrial visit. Also, we extend our thanks to Dr.S.Rajakarunakaran, Principal- Incharge for his good support for facilitating such valuable activities.
P r e p a r e d B y 2 V1 \ £ (5
o !> [^Approved By
R a m c o i n s t i t u t e o f t e c h n o l o g y(Approved by A IC T E - New Delhi and Affiliated to Anna University Chen )
An ISO 9001:2015 certified Institution
ISO»001 2011 10 • 1 0 M 3 3 0 M
J K ) 6 ( O S t j 5 V / S> ©ISTo Date: 06/06/2018
Dear Sir,
Sub: Permission for Industrial Visit - 1 Year CSE - 24 students - Reg*
I wish to inform you that, as a part of the curriculum, all students are required to undertake Industrial Visits to a few industries of repute. We feel it will be fruitful if the students with academic background have a glimpse of the industry in order to have a better appreciation o f practical applications of theory.
In this context, we would like to send a batch of about 24 students of I year B.E. Computer Science and Engineering accompanied by two faculty members to visit your esteemed industry' preferably on 07.06.18 (Thursday) from 2.00 PM to 5.00 PM.
I request you to kindly accord the necessary permission for the above visit and arrange for guiding the students.
We assure you that our students will observe the rules and regulations that are prescribed by your industry for the visitors and will in no way disturb the functioning of the industry during
We shall be grateful to you for a favorable response. Herewith we have furnished the list
o f students and accompanying faculty.
Thanking you,
Yours faithfully
their visit.
h o d -c s e
North Venganallur, Rajapalayam - 626 117. Tamil Nadu Tel 04663 233400. 233410; Fax : 233499
e-mail rit rjpm office@gmail com, rit.rjpm@gmail com. www.ritrjpm ac.m
r a m c o in s t it u t e o f TECHNOLOCV, RA.IAPALAVAM
Submitted to the Principal:
Department
Year/Semester/Section
C lass strength
Proposed industries for visit
Date: 06.06.2018
Computer Science and Engineering
B .E C S E /I Year/II Semester
24 Students
1. Rajapalayam M ills Limited, Rajapalayam Proposed period o f Industrial visit : 1 Day
Reason/Justification for organizing Industrial visit (IV)/Industrial Training (IT):
• V is itin g various industries/R&D organizations w ill enrich and upgrade the knowledge
about the latest technological advancements practiced in their premises and enhance
the sk ills o f the students.
• A ccom plishing the outcomes such as
1. Recognizing the various process units
2. Identifying input and output of the process
3. Observing the importance of safety and quality
4. Exp la in in g the concepts and principles
5. Exposing to the real-time applications6. Exploring Industry-Institute Interaction for student internships, student career
opportunities, curriculum development o f special courses to f ill the curricular
gap, arranging expert lecture and funded research and consultancy projects.
Note:• F acu lty Coordinator ( IV / IT ) and Class A dvisor are informed to follow the general
guidelines for organising Industrial Visit/Industrial Training.
• Students and A ccom panying faculty members are instructed to observe the IV / IT
R U L E S A N D R E G U L A T IO N S F O R S T U D E N T S /A C C O M P A N Y IN G F A C U L T Y
M E M B E R -
C . ^ o b
Faculty Coordinator (IV/IT). . iClass Advisor *' 4 HoD/Incharge
Permission granted/not granted
PRINClPAL
R ; A J A P A L A V A1VT M I L L S L I M I T E D g » -
Regd Office Rajapalayam Mills Premises, P A C 02*6^117 *Post Box No 1, Rajapalaiyam, Tamil Nadu, >
S rS ? PL“ M2m3 3 A A A C R 8 8 9 7 F 1 Z 1
Telephone : 91 4563 235666 (5 lines) Fax : 91 4563 236520 E-mail : rajacot@ramcotex com
rajacot@bsnl in Website : www.rajapalayammills co in
16.05.2018
Th e Principal Ramco Institute of Technology,North Venganallur Village..Rajapalayam.
Dear Sir,• I *
Sub: Permission for Industrial Visit - reg
This has with reference to your letter dated 04.05.2018, regarding your CSE
students' visit to our factory. We pleased to inform you that we are permitting
your students to visit our units on 28.05.2018 (Monday) between 2.00 pm to
5.00 pm, in our Mills.
Thanking you
For Rajapalayam Mills Limited
vj -----------------
V.RajuV ice President-Technical
R A M C O INSTITUTE OF TECHNOLOGY, R A J A P A L A Y A M
REQUESTING PERM ISSION FOR O R G A N IZING*.i n d u s t r i a l v i s i t / i n i >i j s t » |A | t r a i n i n g
D ate-.28.05.2018
Submitted to the Principal:
Computer Science and Engineering
B.E CSE /I Year/II Sem ester
30 Students
Department
Year/Semester/Section Class strength
Proposed industries for visit1. Rajapalayam Mills Limited, Rajapalayam
Proposed period of Industrial visit : 1 Day
Reason/Justification for organizing Industrial visit (IV)/Industrial Training (IT).• Visiting various industries/R&D organizations will enrich and upgrade the knowledge
about the latest technological advancements practiced in their premises and enhancethe skills o f the students.
• Accomplishing the outcomes such as1. Recognizing the various process units2. Identifying input and output of the process3. Observing the importance of safety and quality4. Explaining the concepts and principles5. Exposing to the real-time applications6. Exploring Industry-Institute Interaction for student internships, student career
opportunities, curriculum development o f special courses to fill the curricular gap, arranging expert lecture and funded research and consultancy projects.
Note:• Faculty Coordinator (IV/IT) and Class Advisor are informed to follow the general
guidelines for organising Industrial Visit/Industrial Training.• Students and Accompanying faculty members are instructed to observe the IV/IT
R U L E S A N D R E G U L A T IO N S F O R S T U D E N T S / A C C O M P A N Y IN G F A C U L T Y
M E M B E R
Faculty Coordinator (IV/IT) Class Advisor HoD/Incharge
Permission granted/not granted
PRINCIPAL
form No. CO 04 Rev.No. 00 Effective Date: 18.01.2016
R a m c o i n s t i t u t e o f t e c h n o l o g y
ARTM EN I o f C O M P U T E R SC IEN C E AND EN G IN EER IN G
A cadem ic Y ear 2017-18
Industrial visit at B harath E lectronic L im ited, B angalore,
Date: 27-N ov -2017
f a c u l t y Mi?M r n rR
M.Swama Sudha, AP (SG)/CSE,
M r.D.Lakshmanan AP/CSE
Ramco Institute of Technology, Rajapalayam.A TTEN D ED R V -
IV Year CSE Students - 38
ABOUT THE INDUSTRY: ^
In 1954, in a newly independent India, the need to develop indigenou ^ ^ ctron-cs Limited self-reliant India gave birth to many Public Sector Underta ing cornpany providing state- 1E L ) was one such dream. The objective is to be a customer °^u 0f quality, delivery &
-the-art products & solutions at competitive prices, meetmg the deman
rvice.
;L designs, develops and manufactures products in the
Electronic voting machine D efence Communication products
Naval Systems Weapons Systems Simulators Batteries
SESSION
The session started with the presentation. A faculty from the industry explained us about
the terms and conditions o f their industry and where they are im porting their raw materials and
how they are manufacturing the products.
Then expert took the around the com pany using com pany bus v isitin g all departments
where the products are manufactured, assem bly section and testing section .F inally we went
checking the quality by quality assurance section. The defense products tested in different
environment. They explained clearly about the software’ s used behind the machines and how the
coding’s are done. T h ey produce a w ide variety o f defense and non-defense product. B E L L also
manufactures related products optoelectronics components and assem blies, Microwave %
Integrated C ircu it A ssem b lies, Antennae m anufacturing. Products and services from B E L for
offset requirements include manufacture o f precision m echanical parts and assemblies for use in
aircraft. He also discusses the recruitm ent procedure done in B e ll Co m pan y.
SUMMARY:
The purpose of conducting the industrial visit is to make students to gain know ledge about the contribution of computer science.
I would like to thank our facilitators Dr. K. Vijayalakshmi, HOD/CSE for m o t i v a t i n g us to attend such Industrial visit. Also, we extend our thanks to Dr. R. V. Mahendra Gowda, Principal, for his good support for facilitating such valuable activities at CSE Department.
Prepared By
i r t
1 - f
' I I O l I I X I i N O I . O C i VAn !' i n> r!'" Afflllrtlrnl loAnnn I JmIvummiIv < IimimmD
•*I* I*r* ' •Mllfliul iMHllllillUn
,S t » - 2017PrtU -.T o
( io u e r n l M a u n d e r,
Public Relation Department,Bharat Electronics Limited,Bangalore -5(>0 0(>7.Sir,
1 ^ ^ S | j i
111,1 ,on f«r industrial visit - IV Your CSE-38 studonts-Reg.
Squired to f [tl ovm ^ou ^at, as a part of the curriculum, nil students are Will be fruitf T n<ustna Visits to a few industries of repute. We feel it industry i ^ ! students with academic background have a glimpse of the theory * 0,101 ,() bavc a better appreciation of practical applications of
students f n L° nfex^ we bac already planned to send a batch o f about 38 two f i° Car ^ ^omPlI er Science and Engineering accompanied by circ aC y nicmbers to visit industiy on 20.11.2017. Due to unavoidable °7 lT” n^7Ce We* W,S *° Pos Pone our VISlt* Vou confirmed the date on fac 1t ~ *° visit your esteemed industry. I enclosed the list o f students andinco ieS. COni,n£ *° y°llr industry. Kindly request you to bear with the
onvemence caused and I accord the necessary permission for the above visit and arrange tor guiding the students.
that a r^n r ffS^ C ^ ° Ur stlIC*ents VV1 observe the rules and regulations
* e ( t a c t i o n t u t * " ° ^ diS‘Urb
“ we have
Thanking you,
Yours faithfully,
i io ih s e ,<fi' P R 1N C IP ANorth Venganallur, Rajapalayam - 626 117, Tamil Nadu
Tel: 04563 233400, 233410, Fax 233499 e-mail [email protected], [email protected] www ritrjpm ac in
Date: 22.11.2017
Computer Science and Engineering
B.E CSE/ IVYear/ VII Semester
38 Students
departm ent
Year/Semester/SectionClass strength
Proposed industries for visit
Bharath Electronic Limited, Bangalore, Karnataka 560 058.
Proposed period o f Industrial visit : 2 Days
testification for organizing Industrial visit (IV)/Industrial Training (IT):Visiting various industries/R&D organizations will enrich and upgrade the knowledge about the latest technological advancements practiced in their premises and enhance the skills o f the students.
• Accomplishing the outcomes such as1. Recognizing the various process units2. Identifying input and output of the process3. Observing the importance of safety and quality4. Explaining the concepts and principles5. Exposing to the real-time applications6. Exploring Industry-Institute Interaction for student internships, student career
opportunities, curriculum development of special courses to fill the curricular gap, arranging expert lecture and funded research and consultancy projects.
Note:Faculty Coordinator (IV/IT) and Class Advisor are informed to follow the general guidelines for organising Industrial Visit/Industrial Training.Students and Accompanying faculty members are instructed to observe the IV /IT R U LE S A N D REG U LATIO N S FO R STU DEN TS/ACCO M PAN YING F A C U L T Y M EM BER
raculty C oordinator (IV/IT) Class Advisor H o r ^
PRINCIPAL
Kurin No. CO 04Rev.No. 00
Effective Date: 18 01.2016
H SINK M I NS I I I III I Ol I M 11*01 . Ol , V
IN I1 VIII M | i ‘ * | 1 11 1 OfVll’lf11 II SI II',M I A N h I , N O / S I I IMNO
/Vi 111I1111I1 V nil Jt(H7 IM
liiilllNll In I vUll til l*i ii|4ii 0 Automat ion TV I I III(>;«(« / C A l l g / b l
l'A< i i 1 v Ml (Mi IM 11M t U N’o n k n U m l i . A M ( N < » ) / ( ' S I ,
M " l ‘ A h l n n y i i , A I V C S I n m l
M s 1 N t t b l l i u m l , A I V C S I
K a r n c o I n s t i t u t e o l l e c h n o l o g y K i t j i i p i i l i i y i i n i
ATTKNhlilp \ \ \ :
III Your ( 'Si! Siiulonls 50
a bout n 11 ini > [ is ik V;I ' r u g u t i \ i i t o i n n t i o n I ’ v i . I , i d , ( e a r l i e r k n o w n a s I ' r a g a l i I i i g i n c c r i n g W o r k s ) w a
e s t a b l i s h e d i n I *> / / b y M r A, V , S u l Ik* i i i h I M i I M ) . K n l k n r n i , w i i l i t h e o b j e c t i v e o f m a n u f a c t u r i n j
w o r l d c l a s s m a c h i n e t o o l s i n I n d i a .
I ’ r u g u t i l i a s a l s o m a d e a I d r a y i n t o ( l i m a , s e t t i n g u p a w o r l d c l a s s m a n u f a c t u r i n g p l a n t i i
. b a s i n g , n e a r S h a n g h a i , a t e a l l l u i t l e w o i l i e r I n d i a n c o m p a n i e s h a v e a c h i e v e d . M r a g a t i i s n o v
l e a d i n g m a i u i l a c t m e r o l 1 0 0 1 I u r r e t s a n d A I ( ’s ( A u t o m a t i c t o o l c h a n g e r s ) .
SESSION:
, sess*on started with the presentation. A faculty from the industry explained us aboutterms and conditions of their industry and where they are importing their raw materials and
ow the\ are manufacturing the products. Pragati is known for its Automatic Tool Changers C).ATC is used in Computerized Numerical Control(CNS) machine tolls to improve the
production and carrying capacity o f the machine.
Then we went into the machine’s section to see the working o f the machines. They exp ained clearly about the software’s used behind the machines and how the coding’s are done,
ey produces a wide variety o f turrets, including hydraulic turrets, servo turrets etc.., Pragati so manufactuies ielated products like Tool discs and Tool holders using the ATC technology.
I he coding is written in the AutoCAD language.
SUMMARY-
he purpose of conducting the industrial visit is to make students to gain knowledge about the contribution o f computer science.
I would like to thank our facilitators Mr.R.Venkatesh, Ms. P. Abinaya and Ms.J Sabthami, ssistant Professor/CSE and also Dr. K. Vijayalakshmi, HOD/CSE for motivating us to attend
such Industrial visit. Also, we extend our thanks to Dr. R. V. Mahendra Gowda, Principal, for his good support for facilitating such valuable activities at CSE Department.
RAMCO i n s t i t u t e o f t e c h n o l o g y , r a j a p a l a y a m
REQUESTING p e r m i s s i o n f o r o r g a n i z i n g .INDUSTRIAL VISIT/INDUSTRIAL t r a i n i n g
C„K . Date: 21.08.17^gm iQ gdjO the Prinoipnl-
Department Computer Science and Engineering
B.E CSE/ III Year/ V Semester
52 Students
Year/Semester/Section Class strength
Proposed industries for visit
1. Pragati Automation Pvt. Ltd, Bangalore, Karnataka 560 058.
Proposed period o f Industrial visit : 2 Days
Reason/Justification for organizing Industrial visit (IV)/Industrial Training (IT):• Visiting various industries/R&D organizations will enrich and upgrade the knowledge
about the latest technological advancements practiced in their premises and enhance the skills o f the students.
• Accomplishing the outcomes such as1. Recognizing the various process units2. Identifying input and output o f the process3. Observing the importance o f safety and quality4. Explaining the concepts and principles5. Exposing to the real-time applications6. Exploring Industry-Institute Interaction for student internships, student career
opportunities, curriculum development o f special courses to fill the curricular gap, arranging expert lecture and funded research and consultancy projects.
Note:• Faculty Coordinator (IV/IT) and Class Advisor are informed to follow the general
guidelines for organising Industrial Visit/Industrial Training.• Students and Accompanying faculty members are instructed to observe the IV / IT
R U L E S A N D R E G U L A T IO N S F O R S TU D E N TS /A C C O M P A N Y IN G F A C U L T Y
tyE A IB E R
Faculty Coordinator (IV/IT) Class A cfaso^ HoD/Incfiarge
Permission granted/notgranfed"
PRINCIPAL';
l orm No. CO 04 Rev.No. 00 Effective Date: 18.01.2016
Dr.K.Vijayalakshmi Professor and HeadDepartment o f Computer Science and Engineering Ramco Institute o f Technology Rajapalayam - 626 117
Mobile No: 094866 04522 E-mail: [email protected]
To Date: 10/08/2017
Sir,
Mr.Deepak Joglekar,Director (Technical),Pragati Automation Pvt. Ltd,19&20, Plot No.467-469, 12h Cross, Peenya Industrial Area,Bangalore - 560 058.
Sub: Perm ission for Industrial Visit - III Year CSE - 57 students Reg. Ref: Swaroop and Jaikar Sankarappan.
1 wish to inform you that, as a part of the curriculum, all students are required to undertake
Industrial V is its to a few industries of repute. We feel it w ill be fruitful if the students with academic
background have a glim pse o f the industry in order to have a better appreciation of practical applications of theory.
W ith the reference o f Swaroop and Jaikar Sankarappan, we would like to send a batch of about 57
students o f III year B .E . Computer Science and Engineering accompanied by three faculty members to visit
yo u r esteemed industry preferably on 24.08.2017 (Thursday). I request you to kindly accord the necessary
perm ission for the above visit and arrange for guiding the students.
We assure you that our students w ill observe the rules and regulations that are prescribed by your
com pany for the visitors and w ill in no way disturb the functioning of the company during their visit.
We shall be grateful to you for a favorable response. Herewith we have furnished the list of students
and accom panying faculty.
Thanking you,
Yours faithfully,
HOD-CSE
Or. K. V IJ A Y A L A K S H M t m e ,Ph.o .P to fee eo r ft H ead .
R a m c o In e iH U 1* ^r / U A P A L A V A M M * 1 1 ' -
19th June 2018
To Whomsoever It May Concern
Mr. R Muthu Vijaya Kumar from Ramco Institute of Technology- Tamil Nadu hassuccessfully completed his internship training at Sobha Limited for the duration from 05th June 2018 to 19th June 2018.
We wish him all the best for his future endeavors.
Thanking you,
For Sobha Ltd.
Srinivas Shetty eputy General Manager HR.
S O B H A L IM IT E DR EG D & C O R P O R A T E O F FIC E : ’SO B H A '. SARJAPUR - M A R A TH A H A LLI O U T E R R IN G R O A D . B E LLA N D U K PO ST. B A N G A L O R E - 560103, IN D IA
C IN : L4S201KA 1995PLC018475 I T E L : + 9 1 -80-49320000 I F A X + 9 180 493204-44 I www.sobha.com
S O B H ASB!
19th June 2018
To Whomsoever It May Concern
Mr. Rohith Kumar from Ramco Institute of Technology- Tamil Nadu hassuccessfully completed his internship training at Sobha Limited for the duration from 05th June 2018 to 19th June 2018.
We wish him all the best for his future endeavors.
Thanking you,
For Sobha Ltd.
Srinivas ShettyDeputy General Manager HR.
S O B H A L IM IT E DR EG D & C O R P O R A T F O F FIC E : ‘SO B H A '. SA RjA PU R - M A R A TH A H A LU O U T E R R IN G R O A D . B E LLA N D U R POST B A N G A L O R E - 560103 IN D IA
CIN - L45201KA1995PLC018475 | TE L + 9 1 -80-49320000 j FA X — 9 180 49320444 j www iobha.com
S O B H A
19th June 2018
To Whomsoever It May Concern
Mr. N Muthu Prakash from Ramco Institute of Technology- Tamil Nadu hassuccessfully completed his internship training at Sobha Limited for the duration from 05th June 2018 to 19th June 2018.
We wish him all the best for his future endeavors.
Thanking you,
S O B H A L IM IT E D
R EG D & C O R P O R A T E O F FIC E : S O B H A ’. SARJAPU R - M ARA TH AH ALL! O U T E R R IN G R O A D . B E LLA N D U R POST, B A N G A LO R E 560103, IN D IAC IN : L45201KA1995PLC01847S TEL +91 80-49320000 | FA X +9180 49320444 | wvw.sobha.com
For Sobha Ltd.
Srinivas ShettyDeputy General Manager HR.
S O B H A
P A S S I O N A T W O R K
19th June 2018
To Whomsoever It May Concern
Mr. T Raghul from Ramco Institute of Technology- Tamil Nadu has successfully completed his internship training at Sobha Limited for the duration from 05th June 2018 to 19th June 2018.
We wish him all the best for his future endeavors.
Thanking you,
For Sobha Ltd.
Srinivas ShettyDeputy General Manager HR.
S O B H A L IM IT E DR EG D & C O R P O R A T E O F FIC E : SO B H A '. SARJAPUR • M A R A TH A H A LLI O U T E R R IN G R O A D , B E LLA N D U R PO ST. B A N G A LO R E - 560103. IN D IA
C IN : L4520IKA 1995PLC018475 | T E L : +91-80-49320000 | F A X : +9180 49320444 | www.sobha.com
19th June 2018
To Whomsoever It May Concern
Mr. M. Gokul Nath from Ramco Institute of Technology- Tamil Nadu hassuccessfully completed his internship training at Sobha Limited for the duration from 05th June 2018 to 19th June 2018.
We wish him all the best for his future endeavors.
Thanking you,
For Sobha Ltd.
^ D e p u t y General Manager HR.
S O B H A L IM IT E DR EG D & C O R P O R A T E O F FIC E : 'S O B H A 1. SARJAPUR - M A R A TH A H A LL! O U T E R R IN G R O A D , B E LLA N D U R POST. B A N G A LO R E - 560103, IN D IA
C1N: L45201 K A 1995PLC018475 j T E L . + 9 1 -80-49320000 | F A X +9180 49320444 | www.sobha.coft!
RAMCO INSTITUTE OF TECHNOLOGY r A(Approved by A IC TE - New Delhi and Affiliated to Anna University - Chennai) An ISO 9001:2015 certified Institution
IS O §001 2015
ID 9 1 0 8 6 3 3 0 9 3
Date: 23/02/2018
Bonafide Certificate
This is to certify that S.Balakumaresan (Reg. No.: 953615114010) is a
bonafide student of our college, studying in Third Year B.E Mechanical
Engineering during the academic year 2017-2018. This certificate is issued for
the purpose of attending internship training programme in your esteemed
organisation for the period of 60 days.
PRINCIPAL
North Venganallur, Rajapalayam - 626 117, Tamil Nadu.T e l: 04563 233400, 233410; Fax : 233499
e -m a il: [email protected], [email protected], www.ritrjpm.ac.in
1 / 1 / 2 0 1 9 G m a il - In te rn sh ip Invitation - R N A IP L
|s*1 Gmail Bala selvaraj < [email protected]>
Internship Invitation - R N A IP L3 messages
Training, Support <[email protected]> Wed, May 2, 2018 at 3:18 PMTo: "[email protected]" <[email protected]>Cc: "Nijil, Gangadharan" <[email protected]>, "Job, Antony" <[email protected]>, "Anusha, Ramalingam" <[email protected]>, "Saravanan, Anbalagan" <[email protected]>
Dear BalaKumaresan S,
Greetings from Renault Nissan Automotive India Pvt. Ltd. !
Further to your application, we are happy to inform that you have been selected to pursue your internship at Renault Nissan Automotive India Private Limited (RNAIPL).
Please make note of details as under:
Duration of Internship 10-05-2018 TO 10-07-2018
Reporting Date 10-05-2018
Reporting Time 9:00 AM
Department Vehicle Production Engineering - Trim & Chassis
Mentor Anusha R
HR S P O C Mr Nijil (044-37197182)
Venue Renault Nissan Automotive India Private Limited
Plot No. 1, S IP C O T Industrial Park,
Oragadam Mattur Post,
Sriperumbudur,
Kancheepuram - 602 105
You are required to bring the following documents on the day of your joining:
• Resume
• Bona-fide Certificate - Original
• College ID Proof - Original & Photocopy
• Print out of this invitation mail
• Passport - Size Photo (2)
. Any Valid Govt ID Proof Photocopy
Note: Safety Shoe and Cap (Mandatory).
Below is a brief about Renault Nissan Alliance:
Renault Nissan Automotive India Private Limitedhttps://mail.google.com/mail/u/0?ik=6696d90c8d&view=pt&search=all&permthid=thread-f%3A1599345312835574678&simpl=msg-f%3A1599345... 1/3
1/1/2019 Gmail - Internship Invitation - RNAIPL
Renault-Nissan plant in Oragadam, Chennai is the first dedicated Alliance global plant.
Representing an investment of over 45 billion Rupees over 7 years, the plant has the capacity to produce 480,000 units per year at full ramp up.
The Renault-Nissan Alliance had announced its plans to build a new manufacturing plant in Chennai, India, by the signature of a Memorandum of Understanding with the Government of Tamil Nadu on February 22nd, 2008. The official ground breaking ceremony took place on June 6th, 2008 and the production started in May 2010. The first vehicle produced at the plant was the Nissan Micra, a global hatchback.
Renault-Nissan Automotive India Private Limited has crossed a milestone of having manufactured 1 million cars from this plant.
The companies, which have been strategic partners since 1999, have nearly 350,000 employees and control seven major brands: Renault, Nissan, Infiniti, Renault Samsung Motors, Dacia, Datsun, Dongfeng and Lada.
Terms & Conditions:
1. Office timing> 9:00 AM - 4:30 PM.
2. No stipend will be paid.
3. Free transport (to and from Tambaram) will be provided.
4. Camera mobiles, laptops and any kind of electronic gadgets with camera are prohibited within the premises.
Wishing you all the best with your experience at RNAIPL.
Regards
HR T&D
Renault Nissan Automotive India Pvt LtdPlot No 1 , S IP C O T Industrial Estate,Post- Mattur, Oragadam, Kancheepuram;
Chennai-602105; INDIA
Ph no: 044 37197182
_R E N A U L T N I S S A N
H 1 P U R P O S E MOBILITY FOR ALL
UDM am NNHVlLIHDlWICMKHrVlimM
/
■fjjswu To V tfc tr
***********************************************************************************************************
CO N FID EN TIALITY NOTICE
This message is for the named person's use only. It may contain confidential, proprietary or legally privileged information.
If you receive this message in error, please immediately delete it and all copies of it from your system, destroy any hard copies of it and notify us by email to [email protected] with a copy of this message. You must not, directly or indirectly, use, disclose, distribute, print or copy any part of this message if you are not the intended recipient. RNAIPL and any of its subsidiaries each reserves the right to monitor all e-mail communications through its networks.
RN AIPL is neither liable for the proper, complete transmission of the information contained in this communication nor any delay in its receipt. This email was scanned for the presence of computer viruses. In the unfortunate event of infection RNAIPL does not accept any liability.
https://mail.google.com/mail/u/0?ik=6696d90c8d&view=pt&search=all&permthid=thread-f%3A1599345312835574678&simpl=msg-f%3A1599345... 2/3
BONAFIDE CERTIFICATE
This is to certify the project entitled report “COST REDUCTION ON SEALER”
submitted is a bonafide record o f the w ork done by BALAKUMARESAN S,
pursuing Mechanical E ngineering in Ram co Institute o fT echno logy , Rajapalyam
who carried out the pro ject under our supervision at “RENAULT NISSAN
AUTO M OTIVE INDIA PRIVATE LIM ITED” from 10 M ay 2018 to 10 July
2018.
X• £ )
SIGNATURE
Mr.Takeda N aoaki
General M anager
Body shop D ep artm en t
RNAIPL
Oragadam
SIGNATURE
M r.Anbalagan Saravanan
Deputy General M anager
Body shop Department
RNAIPL
Oragadam
o
aV
SIGNATURE
Mr. Johnson Raj A
Assistant M anager
Body shop Department
RNAIPL
Oragadam