RAM Mount Catalogueaviationdirect.co.za/wp-content/uploads/2014/12/rammounts-prices-… · RAM Universal X-Grip III™ Tablet Holder for Large Tablets includ-ing the Apple iPad, iPad

RAM Mount CataloguePrice list 2013

Mounts, Components, Cradles,Holders, Adapters and Accessories

ABOUT RAM MOUNT

RAM is the revolutionary universal ball and socket mounting SYSTEM that allows you to mount practically

anything anywhere.

RAM’s family of more than 900 interchangeable accessories will offer you solutions to your most challenging mounting

problems.

If you need to mount a GPS, laptop, pda, pocket pc, radar, cam-era, light, computer, cellular phone, speaker, mirror, antenna, or just about anything else look no further. RAM mounts will help you make a professional job easy and affordable.

Its unique design provides easy installation, mobility, strength, versatility, vibration protection and durability, all at a low cost.

RAM is backed by NPIs renowned Lifetime Warranty which makes it the mounting SYSTEM of choice.

To provide light weight strength and corrosion resistance, RAM is made of marine grade aluminum with a powder coated finish, stainless steel hardware and rubber balls.

Recognized and accepted by the U.S. Patent Office, RAM is the only universal ball-and-socket SYSTEM that holds tremendous amounts of weight in high vibration applications for military, commercial and private use.

Prices subject to change due to exchange rate fluctuations.

How it works(we can build these for you)

Large Holder eg. for the ipad

Small Holder eg. for the ipad mini

balls join the bases to the arms

Short arm Medium arm Long arm

Your choice of mounting to attach to aircraft

Suction cup Permanent Yoke mount

HOLDERS


RAM Leg Kneeboard Mount for the Apple iPad Part #: RAM-BM-L1-SB1-AP8U Price: R1651.86

RAM Tab-Tite™ Universal Clamping Cradle for the Apple iPad 4, iPad 3, iPad 2 & iPad 1 WITH OR WITHOUT LIGHT DUTY CASE Part #: RAM-HOL-TAB3U Price: R534.66

RAM Universal X-Grip III™ Tablet Holder for Large Tablets including the Apple iPad, iPad 2, iPad 3, Samsung & Motorola XOOM Part #: RAM-HOL-UN9U Price: R1268.82

1.

2.

3.

RAM Mounts for iPad

RAM TAB-TITE™ Universal Clamping Cradle for the iPad mini WITH CASE, SKIN OR SLEEVE Part #: RAM-HOL-TAB12U Price: R419.52

RAM Universal X-Grip II™ Tablet Holder with 1” Ball Part #: RAM-HOL-UN8BU Price: R502.74

RAM TAB-LOCK™ Universal Locking Cradle for the iPad mini WITH CASE, SKIN OR SLEEVE Part #: RAM-HOL-TABL12U Price: R1079.58

1.

2.

3.

RAM Mounts for iPad Mini

Please confirm stock availability

HOLDERS


RAM EZ-ROLL’R™ Model Specific Cradle for the Samsung Galaxy Tab 10.1 & Galaxy Tab 2 10.1 WITHOUT CASE/SKIN/SLEEVE Part #: RAM-HOL-SAM5U Price: R346.56

RAM Tab-Lock™ Universal Locking Cradle for 10” Screen Tablets WITH OR WITHOUT HEAVY DUTY CASES Part #: RAM-HOL-TABL8U Price: R1130.88

RAM Universal X-Grip III™ Tablet Holder for Large Tablets includ-ing the Apple iPad, iPad 2, iPad 3, Samsung & Motorola XOOM-Part #: RAM-HOL-UN9U Price: R1268.82

1.

2.

3.

RAM Mounts for Samsung Galaxy 7 Inch

RAM Mounts for Galaxy 10.1

RAM EZ-ROLLR™ Model Specific Sync Cradle for the Samsung GALAXY Tab 7.0 Plus WITHOUT CASE/SLEEVE/SKIN Part #: RAM-HOL-SAM6U Price: R429.78

RAM Tab-Tite™ Holder for Small Tablets with Thick Cases Part #: RAM-HOL-TAB5U Cost: R396.72

RAM Twist Lock Suction Cup Mount with Universal X-Grip™ II Holder for Small Tablets Part #: RAM-B-166-UN8U Price: R981.54

1.

2.

3.



RAM 2 7/16” X 1 5/16” BASE WITH BALL Part #: RAM-B-238

Price: R200.64

RAM 2 1/2” DIA. BASE WITH 1” BALL Part #: RAM-B-202 Price: R199.50

RAM 3.3” DIA. SUCT CUP W 1” BALL Part #: RAM-B-224-1U Price: R429.78

RAM 1” Diameter Ball Flat Surface Mount with 2.5” Round Base & Diamond Base Part #: RAM-B-138U Price: R468.54

UNPKGD RAM CLAMP FOR YOKE MOUNTING Part #: RAM-B-121BU Price: R519.84

RAM DBL SOCKET ARM B BALL A LENGTH Part #: RAM-B-201-A Price: R289.56

RAM DOUBLE SOCKET ARM FOR 1” BALLS Part #: RAM-B-201 Price: R285

RAM DBL SOCKET ARM B BALL C LENGTH Product Number: RAM-B-201-C Price: R459.42

UNPKD RAM SUCTION MOUNT TWIST LOCK Part #: RAM-B-166-202U Price: R755.82

1.

2.

3.

4.

5.

6.

7.

8.

9.

ACCESSORIESPlease confirm stock availability

Contents

RAM Mounts for iPadRAM Mounts for iPad Mini

RAM Mounts for Samsung Galaxy 7 InchRAM Mounts for Galaxy 10.1

Accessories


RAM Mounts for iPad

RAM Leg Kneeboard Mount for the Apple iPad Part #: RAM-BM-L1-SB1-AP8U

Compatible Devices: Apple iPad (1st Generation); Apple iPad 2 (2nd Generation)

Portrait or landscape view can be achieved

RAM’s innovative ball and socket snap-link feature has just enough friction to maintain the desired position but also allows for quick and convenient removal.

Material: High Strength Composite

•

•

•

•

Price: R1651.86


Compatible Devices: Apple iPad 4 ((With Lightning Connector)); iPad 3; iPad 2 & iPad 1; HP TouchPad (All with or without light duty case)

Spring loaded back plate and custom support cups makes it easy to load and unload your tablet, along with keeping it secure while on the go. In-terchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports.

Tab-Tite™ Cradle Dimensions: Height: 8.5” minimum to 10.75” maximum (21.6cm - 27.3cm) Width: Maximum to 7.75” (19.7cm) Edge Depth: Maximum to 0.56” (1.4cm)

Tab-Tite™ Cradle Features: 1. Support cups contain open slots to accommodate for tablets of various sizes 2. Back plate can support various size support cups 3. Spring loaded tension provides secure support for your tablet 4. Spring loaded cradle allows for quick release of your tablet 5. High strength materials maximize longevity of cradle 6. Full access to all ports 7. Lifetime warranty

The RAM-HOL-TAB3U is not compatible with the Apple iPad (WITH LIFE PROOF nüüd CASE)

•

•

•

•

•

RAM Tab-Tite™ Universal Clamping Cradle for the Apple iPad 4, iPad 3, iPad 2 & iPad 1 WITH OR WITH-

OUT LIGHT DUTY CASE Part #: RAM-HOL-TAB3U

Price: R534.66


RAM Universal X-Grip III™ Tablet Holder for Large Tab-lets including the Apple iPad, iPad 2, iPad 3, Samsung

& Motorola XOOMPart #: RAM-HOL-UN9U

Simple to open and close, leaves the outside edge of

your tablet almost completely free of obstructions, Soft rub-ber fingers apply just enough force to keep your tablet in safe and secure.

Compatible Devices: Apple iPad Air; Apple new iPad (3rd Generation); Apple iPad 2 (2nd Generation); Apple iPad 1 (1st Generation); Asus EEE Pad; Asus Eee Pad Transformer; HP TouchPad; Lenovo LePad Slate; LG G-Slate; LG Optimus Pad; Microsoft Surface RT, Surface 2, Surface Pro, Surface Pro 2 (with or without protective case); Motorola XOOM; Motorola XYBOARD 10.1; Pandigital R90A200; Samsung Galaxy Tab 8.9; Samsung Galaxy Tab 10.1; Samsung Galaxy Tab 2 10.1; Toshiba Thrive; Most 10” Screen Tablets and with all devices that maintain the following dimensions be-low: Minimum Width = 6.25” (15.87cm) Maximum Width = 8.1” (20.57cm) Depth = 0.875” (2.22cm)

Features: 1. Spring loaded holder expands and contracts for perfect fit of your tablet 2. Rubber coated tips will hold your tablet firm and stable 3. Versatility of holder allows for attachment to many 1” socket mounts 4. Socket technology allows for multiple adjustment angles and articulation of your tablet 5. Easy access grip knobs, located on the back of the holder for quick release of your tablet 6. Multiple mounting access points on the back of the holder 7. Additional support keeper at the bottom of the holder 8. Will not interfere with electronic ports, speakers etc

Note: The RAM-HOL-UN9 does not include a “ball” and will require either a RAM-B-238 or RAM-B-202

•

•

•

•

Price: R1268.82

RAM Mounts for iPad Mini

RAM TAB-TITE™ Universal Clamping Cradle for the iPad mini WITH CASE, SKIN OR SLEEVE

Part #: RAM-HOL-TAB12U

The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet,

allowing access to audio jacks, usb, power, and other ports.

Compatible with the following tablets: Apple iPad mini WITH CASE, SKIN, SLEEVE as well as with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.

The Tab-Tite™ cradle is compatible with Height: 6.80” minimum to 9” maximum Width: Maximum width to 5.68” Depth: 0.125” minimum to 1” maximum

Specifications: Docking Cradle: No Locking Cradle: No Fit’s Tablet’s WITH Cases: Yes Fit’s Tablet’s WITHOUT Cases: No Low Vibration Environment: Yes High Vibration Environment: Yes

Tab-Tite™ Cradle Features: 1. Support cups contain open slots to accommodate for tablets of various sizes 2. Back plate can support various size support cups 3. Spring loaded tension provides secure support for your tablet 4. Spring loaded cradle allows for quick release of your tablet 5. High strength materials maximize longevity of cradle 6. Full access to all ports 7. Lifetime warranty


•

•

•

•

•

•

Price: R419.52



RAM Universal X-Grip II™ Tablet Holder with 1” Ball Part #: RAM-HOL-UN8BU

The RAM X-Grip II™ has a clean and clever four leg design that sports great hold-ing power without hiding your tablet behind foam pads and plastic. Compatible and

interchangeable with a wide range of popular RAM Mounting products.

Consists of a spring loaded holder and 1” rubber ball connected to the back of the base. Included are extra easy access grip knobs, located on the back of the holder for quick release of your tablet. The RAM-HOL-UN8BU expands and contracts for perfect fit of most 7” tablets.

Compatible Devices: Apple iPad Mini; Amazon Kindle; Amazon Kindle Fire; Archos 7; Asus EEE Pad Memo; Barnes & Noble NOOKcolor; BlackBerry PlayBook; Dell Streak 7; HTC Flyer; Panasonic Toughpad™ JT-B1; Samsung Galaxy Tab (7” version); Nexus 7; All devices that maintain the following dimensions below:

Holder Dimensions: Minimum Width = 5.7cm (Devices 5.7cm in width must be a minimum of 17.8cm in height to fit) Maximum Width = 14.6cm Depth = 2.2cm

Features: 1. Spring loaded holder expands and contracts for perfect fit of your tablet 2. Rubber coated tips will hold your tablet firm and stable 3. Versatility of holder allows for attachment to many RAM-to-RAM ball and 1” socket mounts 4. Socket technology allows for multiple adjustment angles and articulation of your tablet 5. Easy access grip knobs, located on the back of the holder for quick release of your tablet

Material: High Strength Composite with Rubber Tips

Ball Size: 1” Rubber Ball “B” Size

•

•

•

•

•

•

•

Price: R502.74


RAM TAB-LOCK™ Universal Locking Cradle for the iPad mini WITH CASE, SKIN OR SLEEVE

Part #: RAM-HOL-TABL12U

The RAM-HOL-TABL12U consists of a spring loaded backplate, custom support cups and locking mechanism for the iPad mini. This spring loaded design makes

it easy to load and unload your iPad mini, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports. Quickly lock the cradle, keeping

your iPad mini secure and safe from theft.

The RAM-HOL-TABL12U cradle is compatible with the following tablets: Apple iPad mini WITH CASE, SKIN, SLEEVE

The Tab-Lock™ holder is compatible with any tablet or reader that will fit the dimen-sions listed below. It is important to verify the dimensions of your tablet when determin-ing the overall size.

Holder Dimensions:Height: 6.55” minimum to 9.8” maximumWidth: Maximum width to 5.68”Depth: 0.125” minimum to 1” maximum

Cradle Features:1. Locking mechanism for theft deterrence2. Compatible with multiple third party iPad mini skins, sleeves and cases3. Support cups contain open slots to accommodate for tablets of various sizes4. Back plate can support various size support cups5. Spring loaded tension provides secure support for your tablet6. Spring loaded cradle allows for quick release of your tablet7. High strength materials maximize longevity of cradle8. Full access to all ports9. Lifetime warranty


Look at our other mounts for Suction Cups and other bases for mounting options for bikes / cars / boats / planes etc.

•

•

•

•

•

•

•

Price: R1079.58


RAM EZ-ROLL’R™ Model Specific Cradle for the Samsung Galaxy Tab 10.1 & Galaxy Tab 2 10.1 WITHOUT CASE/

SKIN/SLEEVEPart #: RAM-HOL-SAM5U

This cradle is designed to hold the following devices:

Samsung Galaxy Tab 10.1 and Galaxy Tab 2 10.1 WITHOUT CASE, SKIN OR SLEEVE

For a device with a case, skin or sleeve, please look at the UN9 or the various TAB holders.

Features: 1. Easy access to electronic ports 2. Patent pending EZ-ROLL’R™ roller design for super smooth placement and removal of the iPad


•

•

•

•

•

Price: R346.56

RAM Mounts for Galaxy 10.1

RAM Tab-Lock™ Universal Locking Cradle for 10” Screen Tab-Keep your tablet safe with the new RAM Tab-Lock™ universal locking cradle. This compact yet durable holder won’t take up a lot of space yet provides loads

of security.

The RAM Tab-Lock™ universal locking cradle is compatible with the following tab-lets & cases:

10” Screen Tablets with or without heavy duty cases 10” Screen Tablets with OtterBox® Defender cases

10” Screen Tablets with Gumdrop Drop Tech cases 10” Screen Tablets with Griffin Technology cases

10” Screen Tablets with Belkin cases Many More!

The Tab-Lock™ cradle is compatible with any tablet or reader that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the size. Maximum Width = 20.62cm (8.12”) Length Range = 21.59cm to 26.67cm (8.5” to 10.5”) Maximum Depth = 2.84cm (1.12”)

Features: 1. Support cups contain open slots to accommodate for tablets of varying dimensions 2. Spring loaded for ease of removal and insertion of your tablet 3. Full access to all ports 4. Customize height of holder for your tablet 5. Locking mechanism for theft deterrence 6. Best usage in high vibration environments


Included with Purchase: (1) Spring loaded locking back plate (2) Support cups for thick tablets

Mounting hardware Use with any RAM bases: RAM-B-166 - Locking Suction Cup RAM-B-149U - U-Bolt RAM-B-316-1-238U - POD I

•

•

•

•

•

•

•


Price: R1130.88


Simple to open and close, the spring

loaded RAM X-Grip III™ leaves the outside

edge of your tablet al-most completely free of

obstructions. Soft rubber fingers apply just enough force to keep your tablet in safe and secure.

Compatible Devices: Apple iPad Air; Apple new iPad (3rd Generation); Apple iPad 2 (2nd Generation); Apple iPad 1 (1st Generation); Asus EEE Pad; Asus Eee Pad Transformer; HP TouchPad; Lenovo LePad Slate; LG G-Slate; LG Optimus Pad; Microsoft Surface RT, Surface 2, Surface Pro, Surface Pro 2 (with or without protective case); Motorola XOOM; Motorola XYBOARD 10.1; Pandigital R90A200; Samsung Galaxy Tab 8.9; Samsung Galaxy Tab 10.1; Samsung Galaxy Tab 2 10.1; Toshiba Thrive; Most 10” Screen Tablets

All devices that maintain the following dimensions below: Minimum Width = 6.25” (15.87cm) Maximum Width = 8.1” (20.57cm) Depth = 0.875” (2.22cm)

Features: 1. Spring loaded holder expands and contracts for perfect fit of your tablet 2. Rubber coated tips will hold your tablet firm and stable 3. Versatility of holder allows for attachment to many 1” socket mounts 4. Socket technology allows for multiple adjustment angles and articulation of your tablet 5. Easy access grip knobs, located on the back of the holder for quick release of your tablet 6. Multiple mounting access points on the back of the holder 7. Additional support keeper at the bottom of the holder 8. Will not interfere with electronic ports, speakers etc

Note: The RAM-HOL-UN9 does not include a “ball” and will require either a RAM-B-238 or RAM-B-202

•

•

•

•

•

Price: R1268.82

RAM Universal X-Grip III™ Tablet Holder for Large Tablets includ-ing the Apple iPad, iPad 2, iPad 3, Samsung & Motorola XOOM

Part #: RAM-HOL-UN9U


RAM Mounts for Samsung Galaxy 7 Inch

RAM EZ-ROLLR™ Model Specific Sync Cradle for the Sam-sung GALAXY Tab 7.0 Plus WITHOUT CASE/SLEEVE/SKIN

Part #: RAM-HOL-SAM6U

This RAM high strength composite cradle is designed to hold the following devices:

Samsung Galaxy Tab 7.0 Plus WITHOUT CASE, SKIN, SLEEVE

Alternative Cradles:RAM-HOL-UN8 - X-Grip™ cradle for the Samsung Galaxy Tab 7.0 Plus WITH CASE, SKIN OR SLEEVE.RAM-HOL-TAB2 - Tab-Tite™ cradle for the Samsung Galaxy Tab 7.0 Plus WITH CASE, SKIN OR SLEEVE.

Features: 1. Easy access to electronic ports 2. Patent pending roller design for super smooth placement and removal of the Galaxy


Note: The RAM-HOL-SAM6U will not hold the Samsung Galaxy 7.0. RAM cradles do not include the RAM-B-202U (Round Base & 1” Ball) or RAM-202U (Round Base & 1.5” Ball), required to attach to the cradle and RAM mounting sys-tem.

•

••

•

•

•

•

Price: R429.78


RAM Tab-Tite™ Holder for Small Tablets with Thick CasesPart #: RAM-HOL-TAB5U

With interchangeable cup ends, you can fit the holder to your tablet for a near custom fit. This spring loaded design makes it easy to load and

unload your tablet Tab, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing

access to audio jacks, usb, power, and other ports, your Tab can be used just as it was intended. Perfect for stationary or on the go applications,

this new RAM product is just what you need to get the most out of your mobile device.

The Tab-Tite™ cradle is compatible with any tablet that will fit the dimen-sions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Height: 5” minimum to 9.1” maximum Width: Maximum width to 4.70” Depth: 0.125” minimum to 0.44” maximum

Features: 1. Support cups contain open slots to accommodate for tablets of various sizes 2. Back plate can support various size support cups 3. Spring loaded tension provides secure support for your tablet 4. Spring loaded cradle allows for quick release of your tablet 5. Full access to all ports


•

•

•

•

Price: R396.72


RAM Twist Lock Suction Cup Mount with Universal X-Grip™ II Holder for Small Tablets

Part #: RAM-B-166-UN8U

The RAM X-Grip™ II Holder is Compatible with the Following Tablets: Amazon Kindle WITH OR WITHOUT LIGHT DUTY CASE; Amazon Kindle Fire WITH

OR WITHOUT LIGHT DUTY CASE; Amazon Kindle Fire HD WITH OR WITHOUT LIGHT DUTY CASE; Apple iPad mini WITH OR WITHOUT LIGHT DUTY CASE; Archos 7 WITH

OR WITHOUT LIGHT DUTY CASE; Asus EEE Pad Memo WITH OR WITHOUT LIGHT DUTY CASE; Barnes & Noble NOOKcolor WITH OR WITHOUT LIGHT DUTY CASE; BlackBerry

PlayBook WITH OR WITHOUT LIGHT DUTY CASE; Dell Streak 7 WITH OR WITHOUT LIGHT DUTY CASE; HTC Flyer WITH OR WITHOUT LIGHT DUTY CASE; Motorola XYBOARD 8.2 WITH OR WITHOUT LIGHT DUTY CASE; Pantech Element WITHOUT CASE; Panasonic Toughpad™ JT-B1 WITH OR WITHOUT LIGHT DUTY CASE; Samsung Galaxy Tab (7” ver-sion) WITH OR WITHOUT LIGHT DUTY CASE; Samsung GALAXY Tab 7.0 Plus WITH OR WITHOUT LIGHT DUTY CASE; Nexus 7; Most 7” Screen Tablets; All devices that maintain the following dimensions below:

Dimensions: Minimum Width = 5.7cm (Devices 5.7cm in width must be a minimum of 17.8cm in height to fit) Maximum Width = 14.6cm Depth = 2.2cm

Features: 1. Spring loaded holder expands and contracts for perfect fit of your tablet 2. Rubber coated tips will hold your tablet firm and stable 3. Versatility of holder allows for attachment to many RAM 1” socket mounts 4. Socket technology allows for multiple adjustment angles and articulation of your tablet 5. Easy access grip knobs, located on the back of the holder for quick release of your tablet 6. Lifetime warranty 7. Rustproof

Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Compo-nents & High Strength Composite


•

•

•

•

•

Price: R981.54


RAM 2 7/16” X 1 5/16” BASE WITH BALL Part #: RAM-B-238

The powder coated marine grade aluminum base contains a 1” diameter rubber ball connected at right angles to a 1.25” x 2.5” inch diamond plate. The base has two holes 1.912” from center to center, positioned at both ends of the diamond base. Material:

Powder Coated Marine Grade Aluminum Ball Size:

1” Rubber Ball “B” Size Note:

Part number reflects product packaged in clear clam shell for store shelf dis-play.

•

•

•

•

Price: R200.64

ACCESSORIES


RAM 2 1/2” DIA. BASE WITH 1” BALL Part #: RAM-B-202

The (RAM-B-202) RAM marine grade aluminum base contains a 1” diameter rubber ball connected to a flat 2.5” diameter base. This mount

has pre-drilled holes, including the universal AMPS hole pattern.

Material: Powder Coated Marine Grade Aluminum


Note: Part number reflects product packaged in clear clam shell for store shelf display. The RAM-B-202 will attach to any RAM composite cradle; however, the RAM-B-238U is most commonly used.

•

•

•

•

Price: R199.50


RAM 3.3” DIA. SUCT CUP W 1” BALLPart #: RAM-B-224-1U

This product The RAM-B-224-1U, composite twist lock mount consists of a 3.25” rubber base that has a is connected to the (RAM-B-238U), dia-

mond base with 1” rubber ball. The suction cup is designed to have an extra strong hold on any smooth non-porous surface, but for best result,

mount the suction cup on a glass or non-porous plastic surface.



Note: The “U” in the part number reflects product packaged in poly bag. Related Links:RAM Suction Cup Mounts PageMounting hardware

Use with any RAM bases: RAM-B-166 - Locking Suction Cup RAM-B-149U - U-Bolt RAM-B-316-1-238U - POD I

•

•

•

•

•

Price: R429.78


RAM 1” Diameter Ball Flat Surface Mount with 2.5” Round Base & Diamond Base

Part #: RAM-B-138U

The RAM-B-138U consists of a 2.5” diameter round base that con-tains the universal AMPs hole pattern, double socket arm and dia-

mond base adapter. The mount is designed with a 1” diameter pat-ented rubber ball and socket system that has adjustment points at both

ends of the double socket arm; this allowing for almost infinite adjust-ment and perfect viewing angles. The hole pattern found on the diamond

base adapter will connect to most RAM cradles. The included RAM’s pat-ented design dampens shock and vibration, helping to extend the life of

your device.

Overall Height: 5.03”


Ball Size : 1” Rubber “B” Ball Size

•

•

•

•

Price: R468.54

UNPKGD RAM CLAMP FOR YOKE MOUNTINGPart #: RAM-B-121BU

UNPKGD RAM CLAMP FOR YOKE MOUNTING1 Inch Rubber BallBlack Powder CoatPowder Coated Marine Grade Aluminum

•

Price: R519.84


RAM DBL SOCKET ARM B BALL A LENGTHPart #: RAM-B-201-A

The RAM-B-201-A, short double socket arm, has a socket at both ends that accommodates 1” ball bases. A single spring inside the

arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjust-

ment and perfect viewing angles.

Dimensions: Overall Length: 2.38” Socket-To-Socket Length: 2”



Note: Part number reflects product packaged in clear clam shell for store shelf display.

RAMÂ® double socket arms with their distinctive hour-glass shape are de-signed and recognized to provide the best possible performance for most any application

•

•

•

•

•

•

Price: R289.56


RAM DOUBLE SOCKET ARM FOR 1” BALLS Part #: RAM-B-201

The RAM-B-201U powder coated marine grade aluminum 3.0” double socket arm allow for connnection to a 1” diameter ball. Socket technology allows for

almost infinite adjustment and perfect viewing angles.

Dimensions: Overall Length: 3.69”

Socket-To-Socket Length: 3”



Note: Part number reflects product packaged in clear clam shell for store shelf display.

•

•

•

•

•

Price: R285

RAM DBL SOCKET ARM B BALL C LENGTH Part #: RAM-B-201-C

The RAM-B-201-C, long double socket arm, has a socket at both ends that accommodates 1” ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.

Dimensions: Overall Length: 6” Socket-To-Socket Length: 5.1875”



Note: Part number reflects product packaged in clear clam shell for store shelf display. RAMÂ® double socket arms with their distinctive hour-glass shape are designed and recognized to provide the best possible performance for most any application

•

•

•

•

•

Price: R459.42


UNPKD RAM SUCTION MOUNT TWIST LOCKPart #: RAM-B-166-202U

The RAM twist lock suction cup mount consists of a 3.25” suction cup locking base and round base end. The mount is designed with a RAM

1” diameter patented rubber ball and socket system that has adjust-ment point at the cradle plate and base. Simply attach the suction cup

base to the windshield of your vehicle for an easy and safe way to view your iPhone in your vehicle. Rubber ball and socket technology allows for

almost infinite adjustment and perfect viewing angles. High quality materi-als ensure your iPhone is safe, secure, and within easy reach. RAMâ��s

patented design also dampens shock and vibration helping to extend the life of your mobile device. The round base is a flat 2.5” diameter base; this mount has pre-drilled holes, including the universal AMPS hole pattern.


Note: Part number reflects product packaged in clear clam shell for store shelf dis-play. Related Links:RAM Suction Cup Mounts Page

•

•

•

Price: R755.82

Documents

RAM Mount Catalogueaviationdirect.co.za/wp-content/uploads/2014/12/rammounts-prices-… · RAM Universal X-Grip III™ Tablet Holder for Large Tablets includ-ing the Apple iPad, iPad