31
RAJASTHAN TOURISM DEVELOPMENT CORRPORATION, HOTEL SWAGATAM CAMPUS, NEAR RAILWAY STATION, JAIPUR PHONE NO. 5115780/2202586 FAX 0141-2201045/2204065 E-TENDER NOTICE NO.08/2016-17 Rajasthan Tourism Development Corporation Limited ( RTDC) Jaipur invites sealed competitive bids for the following works from the contractors registered with State Government, Government of India, Central/State Government undertaking in appropriates class and trade as per the details given below.. The detailed information can be seen at website www.rtdc.tourism. rajasthan.gov.in & sppp.rajasthan.gov.in . The tender documents can be downloaded to http://.eproc.rajasthan.gov.in from dated 26.8.16 to -26.9.16 for PRASAD YOJNA and 26.8.16 to 29.9.16 for SWADESH DARSHAN YOJNA as mentioned below upto 2.00P.M. and should be deposited on line in electronic format upto 3.00 PM on dated 26.9.16 & 29.9.16 respectively. SN Name of work Approx. Value (Rs. in lakhs) Earnest money(in lacs.) Tender Cost (in Rs.) E-Process. Fees(in Rs.) Completion period of work Date of selling Date of receipt (A)Various Development works at Pushkar & Ajmer(Prasad Yojna) 1 Street up gradation from Delhi Gate to Dargah Street(Ajmer) 120.00 2.40 5000/- 1000/- 18 months 26.8.16 to 26.9.16 26.9.16 2 Illumination of Dargah Street Ajmer) 70.00 1.40 5000/- 1000/- 1 2 months 26.8.16 to 26.9.16 26.9.16 3 Improvement of Delhi Gate &Dargah Chowk at (Ajmer) 50.00 1.00 5000/- 1000/- 12 months 26.8.16 to 26.9.16 26.9.16 4 Development of Tourist Information Kiosk at Railway station & Bus Stand ( Ajmer) 70.00 1.40 5000/- 1000/- 12months 26.8.16 to 26.9.16 26.9.16 5 Illumination of Pushkar Sarovar 90.00 1.80 5000/- 1000/- 12months 26.8.16 to 26.9.16 26.9.16 6 Restoration & Development works at Pushkar Market Street around Sarovar Pushkar, Ajmer 100.00 2.00 5000/ 1000/- 18 months 26.8.16 to 26.9.16 26.9.16 7 Improvement of sewage net working & solid waste around Brahma Temple,Pushkar,Ajmer 250.00 5.00 5000/- 1000/- 18months 26.8.16 to 26.9.16 26.9.16 8 Illumination of site & surrounding near Temple pathway of Brahma Temple Pushkar, Ajmer 45.00 0.90 5000/- 1000/- 12 months 26.8.16 to 26.9.16 26.9.16 9 Refurbishment, Restoration &Development works at Parikrama Path Pushkar, Ajmer 300.00 6.00 5000/- 1000/- 18 months 26.8.16 to 26.9.16 26.9.16 10 Improvement & Development of Road of Parikrama Path of Pushkar to facilitate tourist movements Pushkar, Ajmer 70.00 1.40 5000/- 1000/- 12months 26.8.16 to 26.9.16 26.9.16 11 Development of Tourist facility at Parikrama Path of Pushkar Sarovar,Pushkar Ajmer 55.00 1.10 5000 1000/- 12months 26.8.16 to 26.9.16 26.9.16 12 Illumination of Parikrama Path of Pushkar Sarovar Pushkar Ajmer 45.00 0.90 5000/- 1000/- 12months 26.8.16 to 26.9.16 26.9.16 (B)Various Dev. Works at Sambhar, Jaipur 1 Various Improvement works at Sambhar Salt complex, Sambhar, Jaipur 55.00 1.10 5000/- 1000/- 12 months 26.8.16 to 29.9.16 29.9.16 2 Development of caravan Park at, Sambhar salt complex,Sambhar Jaipur 230.00 4.60 5000/- 1000/- 18 months 26.8.16 to 29.9.16 29.9.16- 3 Development of craft haat &administrative block at Sambhar salt complex, Jaipur 185.00 3.70 5000/- 1000/- 18 months 26.8.16 to 29.9.16 29.9.16 4 Development of festival/fair ground & local Bazar at sambhar salt complex , Jaipur 100.00 2.00 5000/- 1000/- 18 months 26.8.16 to 29.9.16 29.9.16 5 Development of mini night safari at Naliasar Sambhar, Jaipur 140.00 2.80 5000/- 1000/- 18 months 26.8.16 to 29.9.16 29.9.16

RAJASTHAN TOURISM DEVELOPMENT CORRPORATION, HOTEL …rtdc.tourism.rajasthan.gov.in/Pdf/6 pushkar market street.pdf · Pushkar to facilitate tourist movements Pushkar, Ajmer 70.00

  • Upload
    others

  • View
    17

  • Download
    0

Embed Size (px)

Citation preview

RAJASTHAN TOURISM DEVELOPMENT CORRPORATION HOTEL SWAGATAM CAMPUS NEAR RAILWAY STATION JAIPUR

PHONE NO 51157802202586 FAX 0141-22010452204065

E-TENDER NOTICE NO082016-17

Rajasthan Tourism Development Corporation Limited ( RTDC) Jaipur invites sealed competitive bids for the following works from the contractors registered with State Government Government of India CentralState Government undertaking in appropriates class and trade as per the details given below The detailed information can be seen at website wwwrtdctourism rajasthangovin amp sppprajasthangovin The tender documents can be downloaded to httpeprocrajasthangovin from dated 26816 to -26916 for PRASAD YOJNA and 26816 to 29916 for SWADESH DARSHAN YOJNA as mentioned below upto 200PM and should be deposited on line in electronic format upto 300 PM on dated 26916 amp 29916 respectively

SN Name of work Approx Value (Rs in lakhs)

Earnest money(in

lacs)

Tender Cost (in

Rs)

E-Process Fees(in Rs)

Completion period of

work

Date of selling Date of receipt

(A)Various Development works at Pushkar amp Ajmer(Prasad Yojna)

1 Street up gradation from Delhi Gate to Dargah Street(Ajmer)

12000 240 5000- 1000- 18 months 26816 to 26916

26916

2 Illumination of Dargah Street Ajmer)

7000 140 5000- 1000- 1 2 months 26816 to 26916

26916

3 Improvement of Delhi Gate ampDargah Chowk at (Ajmer)

5000 100 5000- 1000- 12 months 26816 to 26916

26916

4 Development of Tourist Information Kiosk at Railway station amp Bus Stand ( Ajmer)

7000 140 5000- 1000- 12months 26816 to 26916

26916

5 Illumination of Pushkar Sarovar 9000 180 5000- 1000- 12months 26816 to 26916

26916

6 Restoration amp Development works at Pushkar Market Street around Sarovar Pushkar Ajmer

10000 200 5000 1000- 18 months 26816 to 26916

26916

7 Improvement of sewage net working amp solid waste around Brahma TemplePushkarAjmer

25000 500 5000- 1000- 18months 26816 to 26916

26916

8 Illumination of site amp surrounding near Temple pathway of Brahma Temple Pushkar Ajmer

4500 090 5000- 1000- 12 months 26816 to 26916

26916

9 Refurbishment Restoration ampDevelopment works at Parikrama Path Pushkar Ajmer

30000 600 5000- 1000- 18 months 26816 to 26916

26916

10 Improvement amp Development of Road of Parikrama Path of Pushkar to facilitate tourist movements Pushkar Ajmer

7000 140 5000- 1000- 12months 26816 to 26916

26916

11

Development of Tourist facility at Parikrama Path of Pushkar SarovarPushkar Ajmer

5500 110 5000 1000- 12months 26816 to 26916

26916

12

Illumination of Parikrama Path of Pushkar Sarovar Pushkar Ajmer

4500 090 5000- 1000- 12months 26816 to 26916

26916

(B)Various Dev Works at Sambhar Jaipur

1 Various Improvement works at Sambhar Salt complex Sambhar Jaipur

5500 110 5000- 1000- 12 months 26816 to 29916

29916

2 Development of caravan Park at Sambhar salt complexSambhar Jaipur

23000 460 5000- 1000- 18 months 26816 to 29916

29916-

3 Development of craft haat ampadministrative block at Sambhar salt complex Jaipur

18500 370 5000- 1000- 18 months 26816 to 29916

29916

4 Development of festivalfair ground amp local Bazar at sambhar salt complex Jaipur

10000 200 5000- 1000- 18 months 26816 to 29916

29916

5 Development of mini night safari at Naliasar Sambhar Jaipur

14000 280 5000- 1000- 18 months 26816 to 29916

29916

2

6 Development of camping ampconstruction of log huts at Naliasar Sambhar Jaipur

40000 800 5000- 1000- 18 months 26816 to 29916

29916

7 Solar street lighting at Naraina Sambhar Jaipur

1200 024 1000- 1000- 7 months 26816 to 29916

29916

8 Solar street lighting for approach road for Bi-cycle Track

7000 140 5000- 1000- 12 months 26816 to 29916

29916

The undersigned reserves full right to cancel all or any part of the NIT without assigning any reason Terms amp Conditions

1 The bid shall be in two part ie (A) Technical bid ( 2) Financial bid for item(A )serial no1 679 amp for item(B) serial no2

3456 and for rest items ie(A)23458101112amp(b)178 financial bids are acceptable The technical bids will first be

opened on due date ie 260916 amp 290916 as mentioned above at 400 PM In case of any holiday on the opening date

of the tender the same shall be opened on next working day on same time After scrutiny and declaration of

qualifiedsuccessful bidders the financial bids will be opened for which the successful bidders will be informed

2 The registration certificate in appropriate class amp trade Sales tax PAN NO EPF REGISTRATION NO service tax

registration copies are to be enclosed in technical bid

3 The Earnest money amp tender cost should be submitted in the name of General Manager-Works RTDC Ltd Jaipur and

e-processing fees in the name of MD RISL Jaipur in the form of Bank Demand Draft shall be deposited in person in

the office of Generam Manager-Works RTDC LtdJaipur upto 200 PM upto dated 2692016 amp 2992016

respectively and information thereof will also be given on website with tender document

4 The participants firms should have similar works experience of 13 value of the works as above in last five years

(including current year if opted by the bidder) and attested copies of certificate of satisfactorily completion of work

should also be given

5 The bidder must ensure that all the information required in the documents is furnished by him complete in all

respects He would not be allowed to withdraw any documents or to rectify any information after submitting the bid

6 The copy of balance sheet of the firm for last three years duly certified by CA showing turnover of the firm is to be

given

(Madhav Sharma) GENERAL MANAGER-WORKS

RTDC LTD JAIPUR No Date Copy to following for information amp na-

1 PS to Director Tourism Govt of Rajasthan Jaipur

2 PS to Managing Director RTDC Ltd Jaipur

3 EO to Executive Director (Finance) RTDC Ltd Jaipur

4 PA to Executive Director RTDC Ltd Jaipur

5 Divisional Engineer RTDC Ltd Jaipur

6 Assistant Accounts Officer Works Division RTDC Ltd Jaipur

7 Cashier WD RTDC Ltd Jaipur

8 Computer Operator Computer section to upload the NITBID on website as mentioned above

(Madhav Sharma)

GENERAL MANAGER-WORKS

RTDC LTD JAIPUR

3

RAJASTHAN TOURISM DEVELOPMENT CORRPORATION

HOTEL SWAGATAM CAMPUS NEAR RAILWAY STATION JAIPUR PHONE NO 51157802202586 FAX 0141-22010452204065

E-TENDER NOTICE NO 082016-17 Rajasthan Tourism Development Corporation Limited ( RTDC) Jaipur invites sealed competitive bids for the Various Development refurbishment restoration amp construction Works at Ajmer-Pushkar (PRASAD YOJNA) amp Sambhar Town Jaipur ( Swadesh Darshan Yojna) from the contractors registered with State Government Government of India and undertaking of statecentral Government in appropriates class amp trade The detailed information can be seen at website wwwrtdctourismrajasthangovin amp sppprajasthangovin The tender documents can be downloaded to httpeprocrajasthangovin from dated 2682016 to 2692016 for Prasad Yojna and from dt 2682016 to 2992016 for Swadesh Darshan Yojna upto 200 PM The undersigned reserves the full rights to reject all or part thereof the tender

(Madhav Sharma) GENERAL MANAGER-WORKS

RTDC LTD JAIPUR No Date Copy to following for information amp na-

1 PS to Director Tourism Govt of Rajasthan Jaipur

2 PS to Managing Director RTDC Ltd Jaipur

3 EO to Executive Director (Finance) RTDC Ltd Jaipur

4 PA to Executive Director RTDC Ltd Jaipur

5 Divisional Engineer RTDC Ltd Jaipur

6 Assistant Accounts Officer Works Division RTDC Ltd Jaipur

7 Cashier WD RTDC Ltd Jaipur

8 Manager RTDC Ltd Publicity Section Jaipur for publication as per Rajasthan Transparency in Public

Procurement Act -2013 for serial No(A) 17913 and (B)2356 in One leading regional daily news

paper One state level leading daily news paper and one All India level daily news paper and for rest

serial no ei(A)234568101112ans (B) 1478 in one leading regional daily news paper and One

state level daily news paper

(Madhav Sharma) GENERAL MANAGER-WORKS

RTDC LTD JAIPUR

4

RAJASTHAN TOURISM DEVELOPMENT CORRPORATION

HOTEL SWAGATAM CAMPUS NEAR RAILWAY STATION JAIPUR PHONE NO 51157802202586 FAX 0141-22010452204065

GENERAL TERMS amp CONDITIONS

SN

1 Tenders invited from Contractor having registration in Government Semi-Government or any other Public Sector Undertakings

2 The work shall include all lead and lifts at site of work

3 The work shall be strictly carried out as per the tender specification amp Indian Standard specifications

4 Any kind of damage to the existing structure during the execution of the work shall be made good by the contractor at no extra cost

5 Electricity and water for execution of the work shall be arranged by the contractor at his own cost

6 The contractor shall be fully responsible for compliance of Labour laws EPFESI amp contribution towards labour as well as himself and insurance etc for the workers engaged by him on the works

7 Conditional tender shall not be considered and shall be liable to be rejected without taking any cognizance thereof

8 Quantities of any item may be increased decreased or deleted as per site conditions and as per instruction of Engineer-in-charge Nothing can be claimed extra for such changes in the item and also in the variation of quantities

9 All the instructionsspecifications issued by RTDC authorities from time to time regarding construction addition or alteration shall be binding upon the contractor

10 The contractor shall take all the necessary measures and will be responsible for the safety for the Labour at work and existing structure etc

11 Skilled man power shall be provided at site to engineer-in-charge for checking of lines levels and specifications etc who shall be at the disposal of the engineer-in-charge If not provided by the contractor than same shall be engaged by the Corporation on Contractorrsquos cost and the payment made shall be recovered from the contractor

12 Contractor is to abide by the instruction issued by the Engineer-in-charge amp Client Department Authority regarding collectionstorage of material at site

13 All service lines ie water supply sewer telephone Electricity etc at the site shall have to be taken care of by the contractor during the execution Any damage to these lines shall have to repaired by the contractor

14 All finishing material shall be got approved by the Clientcompetent authority before execution

15 All hidden works shall be got checked necessarily from the engineer-in-charge before covering them for which the contractor shall inform the engineer-in-charge well in time

16 Final payment shall be made only after satisfactory handing over of the said work to the clientdepartment All materials shall be got tested before use by the contractor at his own cost as directed by Engineer-in-charge

17 Defect liability shall be 1 year for the said work

18 The Tenderers are advised to visit the site before quoting the rates and to seek any clarification regarding said work they can contact the engineer-in-charge during office hours

19 The rates quoted by the contractor shall be deemed to be inclusive of Sales tax Income Tax Service tax Royalty Labour cess amp any other taxdutycess applicable by law at the time of payment and shall be borne by the contractor for performance of the contractor The employer shall deduct such taxes as per applicable law

20 The Photographsrsquo of site before starting of the work and after completion of work will be provided in two copies by the contractor at his own cost amp no extra cost will be paid by department

21 The rates quoted by the contractor will remain valid upto four months Validity period on the written consent of the contractor can be extended

Signature of Contractor with seal and full address with mobile No

General Manager-Works RTDC Ltd Jaipur

5

RAJASTHAN TOURISM DEVELOPMENT CORPORATION LIMITED JAIPUR

(WORKS DIVISION)

TENDER DOCUMENT (Technical Bid)

E-Tender (NIT No) 082016-17

Name of work- Pushkar Market Street- Restoration And Development Works

Mirror

Signature of Contractor

6

UNDERTAKING

THE GENERAL MANAGER ndashWORKS RTDCLTD JAIPUR

Dear Sir

Having examined and understood terms amp conditions the plans specifications and Schedule of

Quantities for the work prepared by your Architects Engineers IWe hereby offer to execute the work at the

rates which IWe have quoted for respective items specified IWe herewith enclose myOur DD no------------

----------dated---------------Name of bank-----------------------------------------------------------for Rs

as earnest money for execution at myour tendered rates

In the event of this Tender being accepted IWe agree to enter into agreement as amp when required

to execute the work

Yours Faithfully

CONTRACTOR (Name amp Full address with seal)

7

MEMORANDUM IWe hereby tender for execution for the work within time specified and rates entered in the schedule G in all respects in accordance with the specifications designs drawings and instructions in writing referred to herein and in the annexed conditions with such materials as are provided for by and in all other respects in accordance with such conditions so far as applicable IWe have visited the site of work amp IWe amare fully aware of all the difficulties amp conditions likely to effect carrying out of the work IWe have fully acquainted myselfourselves about the conditions in regard to accessibility of site and quarrieskilns nature and the extent of ground working conditions including stacking of material installation of TampP conditions affecting accommodation and movement of labour etc required for the satisfactory execution of this contract (a) Name of work (b) Estimated Cost (in figures) Rs

(in words) Rs

(c) Earnest Money Rs (d) Security Deposit (Including Earnest Money) Rs NOTE (1) Security deposit to be 10 in the form of cash or deduction to be made from running bills (2) Time allowed for the work to be reckoned from the 10

th day after the date of written order to

commence the work Should this tender be accepted in whole or in part IWe hereby agree to abide-by and fulfill all terms and provisions of the conditions of contract annexed hereto and in the NIT or in default thereof to forfeit and pay to the General Manager (Works) Jaipur the sum of money mentioned in the said conditions A sum of Rs is enclosed herewith as earnest money This amount of earnest money shall absolutely be forfeited to Department without prejudice to any other right or remedies should IWe fail to commence the work specified in the above memorandum or should IWe not furnish performance guarantee in cash or in form or Bank guarantee at the time of execution of agreement specified in the above memorandum in accordance with the said conditions of contract

Signature of Contractor The above tender is hereby accepted by me

General Manager-Works

RTDCLTD JAIPUR

8

DIRECTIONS FOR GUIDANCE OF CONTRACTORS

1 All works proposed for execution by contract will be notified in a form of invitation to tender pasted on a board hung up in the

office and signed by General Manager-Works RTDC LTD Jaipur or duly authorized officer

The form of invitation to tender will state the work to be carried out as well as the date of submitting and opening of tenders

amp the time allowed for carrying out the work also the amount of earnest money to be deposited with the tender and the

amount of security deposit to be deposited by the successful tenderer and the percentage as per PWFampAR Govt of

Rajasthan to be deducted from the bills copies of the specifications designs and drawing and estimated ratesscheduled

rates and any other documents required in connection with the work for the purpose of identification by the Rajasthan

Tourism Development Corpn Jaipur Drawings shall also be open for inspection by the contractor at the office of the General

Manager9 Works) Rajasthan Tourism Development Corporation Ltd Jaipur or duly authorized Engineer during office hours

2 In the event of the tender being submitted by a firm it must be signed separately by each partner thereof or in the event of

the absence of any partner it must be signed on his behalf by a person holding power of attorney authorizing him to do so

3 Receipt for payment made on account of a work when executed by a firm must also be signed by the several partners

except where the contractor are described in their tender as a firm in which case the receipt must be signed in the name of

the firm by one of the partners or by some other person having to give effectual receipts for the firm

4 Any person who submits tender shall fill up the usual printed form stating at how much percent above or below the rates

specified or on item rates he is willing to undertake the work Tenders which propose any alteration in the work specified in

the said form of invitation to tender or in the time allowed for carrying out the work or which contain any other conditions of

any sort will be liable to rejection No single tender shall include more than one work but person who wish to tender for two

or more works shall submit a separate tender for each work Tender shall have the name and number of the work to which

they refer written outside the envelope

5 The General Manager-Works RTDC Ltd Jaipur or other duly authorized Engineer will open the tenders in the presence of

any intending contractors or their authorized representative who may be present at the time and will enter the amounts of the

several tenders in the Register of tenders in the event of the tender being accepted A receipt for the earnest money

forwarded therein shall there upon be given to the contractor who shall there-upon for the purpose of identification sign

copies of the specifications and other documents In the event of a tender being rejected the earnest money forwarded with

such unaccepted tender shall be returned to the contractor

6 The General Manager-Works RTDC Ltd Jaipur or other authorized Engineer shall have the right of rejecting all or any of

the tenders without assigning any reasons

7 The accompanying schedules of quantities in ldquoGrdquo Schedule are the architects estimated quantities for the work The

contractors shall attach histheir OWN prices for the each item in column for rates left blank and shall money out the same in

the final column amp totals HeThey shall fill up properly the form of tender and the schedule of quantities without adding any

stipulations thereto The tender shall show the total amount arrived at in the manner above described The tender Notice to

Contractors conditions of contract Specifications and the Schedule of quantities and rates etc shall all be embodied in and

shall form a part of the contract

8 The quantities contained in the Schedule are only approximately correct If more or less quantities are actually done on the

work the contractors shall be paid for the same at the rates tendered by himthem in the Schedule of Rates The work as

actually done will be measured by the contractors qualified engineer and bill furnished to the General Manager(Works)

RTDC Ltd Jaipur which in turn will get it checked by the Engineer in charge time to time and will be paid for as provided in

the Special Condition of Contract after deducting SD as per PWFampAR provisions

Signature of Contractor

9

GENERAL CONDITIONS OF CONTRACT 1 All the materials used shall be of approved quality and to the entire satisfaction of the General Manager-works RTDC Ltd

Jaipur

2 The General Manager-works RTDC Ltd Jaipur or the Engineer in charge reserves right for any additions and alternations or

omission in the tender and execution of works In case the Department supplies the material specified in the tender recovery for

the cost of supplied material from subsequent running Bill will be made

3 The Department shall pay to the contractor as detailed in special conditions of contract

4 The contractors isare to set out the work in accordance with the plans All lines to be accurately marked or otherwise to the

satisfaction of the Engineer in charge

5 The contractors shall meet the Engineer in charge or his representative at the works site whenever required

6 The contractors shall maintain and be represented on site at all times by a responsible and efficient EngineerArchitect who

thoroughly understands all the trades enrolled The Engineer in charge reserves the right to dismiss the Foremen and any

workmen who in his opinions are not sufficiently skilled or who neglect or refuse to obey instructions

7 The contractors shall be given one set of the plans free of charge

8 The General Manager-works RTDC Ltd Jaipur reserves the right of altering the drawings and nature of the work and adding

to or omitting any item of work or having portions of the same carried out departmentally or otherwise and such alterations or

variations shall be carried out without prejudice to the contract

9 The General Manager-works RTDC Ltd Jaipur reserves to the right to increase or decrease quantity of work or omit some part

of the work without violating the contract and for which he will not be held liable to compensation to the contractors

10 All plants machines and other equipments are to be arranged by contractor for the work

11 Any percentage rate tender containing item-wise rates and any item rate tender containing percentage rate below or above

estimatedscheduled rates will be summarily rejected

12 The Conditions of Contract shall govern sales tax or any other tax on materials or Income Tax in respect of the contract

Deduction of Income Tax at source will be made as per provisions of the Income Tax Act in force from time to time

13 If on check there are differences between the rate quoted by the Contractor in words and figures or in the amount worked out

by him the following procedure shall be followed -

(i) Where there is a difference between the rates in figures and words lower of the two rates shall be taken as valid and correct

rate

(ii) When the rate quoted by the contractor in figures and in words tallies but the amount is not worked out correctly the rate

quoted by the contractor shall be taken as correct and not the amount worked out

(iii) While quoting rates if raterates against any item or items are found to be omitted the rate given in the Schedule G by the

Department for such items will be taken into account while preparing comparative statement and contractor shall be bound to

execute such item on G Schedule rates

(iv) In case where percentage is given but the above or below not scored the tender will be non-responsive

14 The Contractor shall read the specifications and study the working drawings carefully before submitting the tender

15 After acceptance of the tender the Contractor or all partners (in the case of partnership firm) will append photographs and

signatures duly attested at the time of execution of agreement

16 Experience into similar nature of works for which tender invited and fulfill conditions of NIT

17 Contractors shall submit only unconditional tenders Conditional tenders are liable to be rejected similarly

Signature of Contractor

General Manager-Works

10

SPECIAL CONDITIONS OF CONTRACT

1 The Technical bid will be opened first on the day mentioned in the NIT Bidders will be evaluated as per norms set for

qualification in Technical bid and Financial bids of only those bidders will be opened which were qualify in the technical bid

2 Contractors bidding for the work should be reputed experienced contractors fulfilling the requirements laid down in the NIT

and well versed and working in the field Only those bidders will be considered qualified in the Technical bid who have

executed similar works to the tune of at least 13rd of the estimated value of the work (published in NIT) during last five

years (updated to current price level 100 per annum) and have the necessary technical expertise and support

machinery and administrative and financial capability to satisfactorily execute works in question for which they are bidding

3 The decision of the General Manager-works RTDC Ltd Jaipur or his representative on pre-qualification in the Technical bid

will be final amp binding

4 All raw materials will have to be brought to the site and all carving work will have to be executed only at site to qualify for

payment of running bills No payment of any material at or work done at place other than the site of work will be made

unless such material is brought to site and found acceptable to be used on the work

5 General conditions of contract special conditions of contract and specification of work as appended herewith in addition to

General condition of agreement will be applicable on this work In addition the PWD specifications will also be applicable

as relevant to the particular item of work

6 Work shall be carried out as per approved drawings and designs to be provided by the departmental architect engaged

7 Architectural work for the construction shall be of a high standard quality and pattern (class and style) to match the existing

work

8 All work shall be carried out as per approved samples of each element

9 The exposed surface of stonework will be suitably protected from damage disfigurement during the course of work and will

be cleaned and washed removing all spots etc for final acceptance on completion

10 All scaffolding shuttering TampP etc for the work shall have to be arranged by contractor at his own cost

11 The time for completion of work as given in the NIT shall be strictly adhered to and the work so planned as to be completed

within the scheduled period The contractor shall provide with a time schedule to the department for progressing with and

completing various stages of the work

12 Only best quality stone and other building materials shall be used in construction and all such material will be got approved

from the Engineer in-charge before use

13 Quantities of individual items can be increased invariably or even reduced withdrawn and specification and designs altered

at the discretion of Engineer in-charge and contractor will not be entitled to any compensation thereof for such alteration For

extra items if any rates will be decided based on market analysis to be provided by contractor

14 Contractor will give notice before any work is covered up Bad work will have to be redonereplaced at contractors cost

15 Full scale drawings form work for architectural stone work to be developed from drawings wherever necessary shall be got

prepared by contractor for prior approval before Signature of contractor

construction at his own cost and he will get these approved from the Engineer in-charge General Manager-Works RTDC

Ltd Jaipur who shall however be at liberty to modify such drawings form work and no extra payment shall be made for this

16 It will be the contractors responsibility to get the drawings formwork and sample of individual itemselements of work

approved from the departmental Architect Engineer before proceeding with manufacture of the same at site

17 The contractor shall provide adequate safety measures and proper insurance for his labour working at site and it shall be

done by contractor at his end Contractor shall settle all labour disputes at his own level The contractor shall observe all

labourfactory laws in force

18 Security deposit will be recovered from each running bill of contractor as per provisions of PWFampAR Earnest money will be

adjusted in the security deposit amount Security deposit shall be returned after one year satisfactory completion of the work

and on satisfactory performance of structure

19 No escalation will be payable even if the completion period exceeds that as stipulated

20 In case of unsatisfactory work by contractor or deliberate delaying the work without valid reasons the contract will be liable

to be terminated at the stage up to which acceptable work is done and paid for with no compensation of any sort payable to

contractor for withdrawal at that stage and possession of work executed at site will be taken over by Department In case of

any dispute the decision of the Department will be final and binding on the contractor

21 The bidder has to furnish with his technical bid (In prescribed Performarsquos Schedule 1-5)

Full information regarding financial resources and capability in Schedule-1 herewith(Photocopy to be made out of schedule)

a) Details of works of similar type and magnitude completed in last 5 years by the tenderer in Schedule II (Photocopy to be

made out of schedule)

b) Details of works bids and works to be completed in Schedule-III (Photocopy to be made out of schedule)

c) Details of technical supervisory personnel and master craftsman craftsman which he proposes to utilize for this work in

Schedule IV (Photocopy to be made out of schedule)

d) Details of plant and equipment proposed for use in the work in Schedule V (Photocopy to be made out of schedule)

11

e) The bidder should demonstrate that they have adequate financial resources (Over draft Credit Limit letter from bank)

Signature of Contractor

22 Bid capacity

(i) Bidders who meet the minimum qualifying criteria are to be evaluated further for Bid capacity as under -

(a) Maximum value of similar works executed in any one year during the last five years including current year (updated to the

current price level) extracted from schedule II which will take into account the completed and on going works

(b) Value of the existing commitments works (complete or partial) to be completed in the coming 12 months (up dated to the

current price level) Extracted from schedule III

(ii) Bid Capacity=(AxNx3-B) where

A=Maximum value of works executed in any one year during the last five years (updated to present price level) taking into

account the completed as well as works in progress

N=Number of years prescribed for completion of the works for which bids are invited herein (in years)

B=Value at present price level of existing commitments and on going works (at hand) to be executed during N period

The bidder will be post qualified only if his bid capacity is equal or more than the cost of work in question No contract may be

awarded to bidder lacking the financial and technical resources to undertake the work The decision of General Manager

(Works) Rajasthan Tourism Development Corporation Ltd Jaipur in this regard will be final and binding

NOTE -The present price level for turn over cost of completed works and amount of similar nature works (of a value at least 13rd of the estimated value of the work published in NIT during last five years) the previous years value shall be given weightage of 10 per year as following for the tendersbids invited by this department ndash

(a) For last year - 100 (b) For one year before - 110 (c) For two year before - 121 (d) For three year before - 133 (e) For four year before - 146

For current year the price level shall be 10

23 The right to qualify or not to qualify any or all the bidders without assigning any reason is reserved with the General Manager

(Works) Rajasthan Tourism Development Corporation Ltd Jaipur

24 Determination of Responsiveness

a) Prior to the detailed evaluation of bids the General Manager (Works) Rajasthan Tourism Development Corporation Ltd

JAIPUR will determine whether each bid is substantially responsive to the requirements of the bidding documents

b) For the purpose of this clause a substantially responsive bid is one which has required capacity capability and financial

resources and whose bid conforms to all the terms conditions and specifications of the bidding documents without

material deviation or reservation A material deviation or reservation is one which affects in any substantial way the

scope quality or performance of the works or which limits in any substantial way the General Manager (Works)

Rajasthan Tourism Development Corporation Ltd JAIPURrsquoS right or the Bidders obligations under the contract and the

rectification of which deviation or reservation would effect unfairly the competitive position of other bidders presenting

substantially responsive bids

c) if a bid is not substantially responsive to the requirements of the bidding documents it will be rejected and may not

subsequently be made responsive by the bidder having corrected or withdrawn the nonconforming deviation or

reservation

25 Construction programme ndash

1) Within the time stated in this contract the Contractor shall after the acceptance of his tender submit to the General Manager

(Works) Rajasthan Tourism Development Corporation Ltd JAIPUR for approval programme together with bar chart PERT

chart

2) proposed deployment of machinery etc showing the order of procedure in which he proposes to carryout the works The

contractor shall provide in writing general description the arrangements deployment of equipment work planning and

methods which he proposes to adopt for the execution of the works

3) If at any time it should appear to the Department that actual progress of the work does not conform to the approved

programme referred to in sub-clause (1) of this clause the Contractor shall produce at the request of the Department a

revised programme showing the modifications to the approved programme necessary to ensure completion of the works

within the time for completion

4) The submission to and approval by the Department of such programmers or the furnishing of such particulars shall not

relieve the contractor of any of his duties or responsibilities under the contract

5) The contractor shall submit within 30 days after the date of notice to proceed with the work a detailed construction

programme to suit the programme of completion for the entire contract period This programme shall be reviewed and

revised every half year at the beginning of the working season to plan timely action for making up the slippages occurred in

the previous season to suit the stipulated period of completion (including mile stones) as extended from time to time

26 Materials workmanship period and certificates of Maintenance and Defect Liability etc

All materials and workmanship shall be of the respective kinds described in the contract and in accordance with the

ArchitectsEngineer instructions and shall be subjected from time to time to such tests as the Engineer may direct at the

place of manufacture or fabrication or on the site or at such other place or places as may be specified in the Contract or at

all or any of such places The contractor shall install quality control laboratory and provide such assistance instruments

machines labour and materials as are normally required for examining measuring and test in any work and the quality

weight or quantity of any material used and shall supply samples of materials before incorporation in the works for testing as

may be selected and required by the Engineer-in-charge

12

Signature of Contractor

27 Period of maintenance and Defects liability

The Contractor shall be responsible to make good within such period as maybe stipulated by the Engineer in-charge any

defect which may develop or may be noticed during period of maintenance of 12 months from the certified date of

completion and which is attributable to the contractor All notice of such defect shall be given to the Contractor promptly In

case the contractor fails to make good the defects the Engineer in-charge may employ other persons to make good such

defects and all expenses consequent thereof and incidental thereto shall be recoverable from the Contractor In the event

the employer takes over portions of work as they are completed the liability of the contractor under this clause for these

portions shall extend to a period of 24 months from the actual dates on which portions of the works are taken over

28 The successful biddercontractor is required to undertake detailed photo recording documentation by still photography

videography of the entire work prior to commencement and the same has to be deposited with the Engineer in charge of

RAJASTHAN TOURISM DEVELOPMENT CORPORATION JAIPUR in two copies immediately Before dismantling any old

work to redo this still photography with specifically putting some identity mark number of the portion by any specified means

has to be done and this to be got checked and certified by Engineer In charge and recorded specifically in the measurement

book (MB) A written permission from the Engineer in charge before commencement of executing such work is essential for

execution as well as for payments

During the work in progress and after its completion also photo documentation is necessary and the photos before amp after

completion of portion of work are essentially to be enclosed with the bill for payment

Signature of Contractor

GENERAL MANAGER (WORKS)

13

SCHEDULE-I

FINANCIAL RESOURCES AND CAPABILITY

(PURSUANT TO CLAUSE 26) 1 Name of Applicant

2 Name of Partner Director

3 Capital

(a) Authorised

(b) ii

4 (a) WhetheCategory of Enlisted in Govt

(b) Details Details of the work completed and applicants performance record for last five years

(information to be furnished in Schedule II in India

(c) Details of works in hand applicants performance record for last five years (Information to be

furnished in Schedule-III)

5 Furnish Balance Sheet and profit and loss statement with auditorrsquos report for the last three years

6 The information on the following aspects should be specifically furnished

(i) Working capital and net worth

(ii) Turnover for the years

a

b

c

(iii) Gross income in years in India

(i)

(ii)

(iii)

(iv) Quick ratio or acid test ration (Quick assets to current liabilities)

7 What is the maximum annual turnover of the project that you can handle (Financial Projection)

8 Have you ever been denied tendering facilities by any Governmental DepartmentPublic Sector

undertaking

(If yes Please give details)

9 List of your source of finance

10 Certificate of financial soundness by Bank

11 Name and address of Bank from whom reference can be obtained

12 Have you ever been declared bankrupt

(if yes please give details)

Signature of Contractor

14

SCHEDULE-II WORKS OF SIMILAR MAGNITUDE TO THE WORK UNDER CONSIDERATION COMPLETED BY THE

APPLICANT IN LAST FIVE YEARS IN INDIA

(Pursuant to Clause 26)

SNo Na

me

of

wor

k

Place

amp

State

Tender

awardi

ng

Agency

Tender

ed Cost

Stipulate

d time of

Completi

on

Time in

which

complete

d

Date

of

comp

letion

Reason

for

Delay

Principal

features

of work

done

Value of

work done

1 2 3 4 5 6 7 8 9 10 11

Year

Year

Year

Signature of Contractor

15

SCHEDULE-III WORKS TENDERED FOR amp WORKS TO BE COMPLETED AS ON THE DATE OF SUBMISSION OF

APPLICATION IN INDIA

(pursuant Clause 26)

SNo Name

of

work

Place

amp

State

Work on Hand Work tendered for

Tender

Cost amp

Date

or

award

Stipulated

period of

Completion

Cost of

work

remaining

to be

executed

Antici

pated

Date

of

compl

eted

Estimate

d cost

(Rs In

Lakh)

Date

when

decisio

n

expecte

d

Stipulate

d Date

period of

Completi

on

Remar

ks

1 2 3 4 5 6 7 8 9 10 11

Year

Year

Year

Signature of Contractor

16

SCHEDULE- IV

Details of Key Personnel intended to be employed for this work

(use separate sheet if necessary)

(Pursuant to clause 26)

S No Name of Person Qualification Designation Experience Work to be

put on

A Technical Personnel

(1)

(2)

(3)

(4)

B Administrative Personnel

(1)

(2)

(3)

(4)

C Master Craftsmen

(1)

(2)

(3)

(4)

D Craftsmen

(1)

(2)

(3)

(4)

E Any other (1)

(2)

(3)

(4)

Signature of Contractor

17

SCHEDULE- V

DETAILS OF MAJOR ITEMS OF CONSTRUCTION PLANT AVAILABLE FOR THIS WORK

S No

Particulars Make Year of manufacture

Nos Whether owned or confirmed lease

1 Lime mortar Mill

2 Scaffolding Material

3 Movable Gantry

Crane etc

4 Any other TampP for

the purpose

5

6

7

8

Signature of Contractor

18

RAJASTHAN TOURISM DEVELOPMENT CORPORATION LIMITED JAIPUR

(WORKS DIVISION)

TENDER DOCUMENT (Financial Bid)

E-Tender (NIT No) 082016-17

Name of work- Pushkar Market Street- Restoration And Development Works

Restoration Conservation work Stained GssMirror

Signature of Contractor

19

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works

(Based on PWD BSR CIVILElectrical Ajmer Circle - 2013 and item rates)

SCHEDULE -G

GENERAL ABSTRACT

SNO WORK AMOUNT

1

PART A- CIVIL WORKS BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

304610000

2

PART B- SANITARY WORKS BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

5936400

3

PART C- HORTICULTURE BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

2627500

4

PART D-NON BSR ITEMS ( CIVIL AND ELECTRICAL)

GRAND TOTAL

I we hereby agree to execute the work PART A In figures Above Below In words

Above below PART B In figures Above Below In words

Above below PART C In figures Above Below In words

Above below PART D In figures Above Below In words

Above below

General Manager Works

RTDC Ltd Jaipur

Signature of the Contractor With Full Postal Address

20

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works

(Based on PWD BSR Civil Ajmer Circle - 2013)

PART A- CIVIL WORKS

SL No Specification Unit Rate QTY Amount

1

Surface Dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr and lift up to 15 Mtr All kinds of soil 100Sqm 437

26

11362

2

Surface Dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr and lift up to 15 Mtr All kinds of soil Cum 127

30

3810

3

Filling available excavated earth (excluding rock) in trenches plinth side of foundation etc in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift Cum 61

12 732

4

Providing and laying in position cement concrete including curing compaction etc complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level

M15 grade Nominal Mix (with graded stone aggregate 20mm nominal size) Cum

3438

230

790740

5

Random Rubble stone masonry for foundation and plinth in Cement Sand mortar above 30 CM thick wall in

21

Cement Mortar 13 ( 1-Cement 3-Sand) Cum

2193

35

76755

6

Random Rubble stone masonry for superstructure above plinth level one storey height above 30cm thick walls in

Cement Mortar 13 ( 1-Cement 3-Sand) Cum

2686

135

362610

7

Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor three level including curing compaction finishing with rendering in cement sand mortar 13 (1 cement 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement for -

Beams suspended floors roofs griders having slopes up to 15ordm landings balconies shelves chajjas lintels bands plain windows sills staircases and spiral staircases etc

M20 grade Nominal Mix

Cum 5138

45

231210

8

Centering amp shuttering with plywood or steel sheets including strutting propping bracing both ways with wooden members and removal of formwork for upto floor three level for

Suspended floors roofs landings staircases balconies girders cantilevers bands coping bed plates anchor blocks sills chhajjas lintel beam etc Sqm 222

60

13320

9

Providing and fabricating reinforcement using steel of SAILVIZAK-RINLTATA TISCONESSARZINDAL VIJAINAGAR IS 1786-1986 for RCC work including straightening cutting bending placing in position and binding (including cost of binding wire) all complete up to floor three level

22

Thermo-Mechanically Treated bars (Conforming of relevent IS code) Kg 78

2630

205140

10

Plaster on new surface on wall in cement sand mortar 13 including racking of joints etc complete fine finish

20mm thick Sqm 161

150

24150

11

6mm thick cement plaster to ceiling of mix 13 (1cement 3 fine sand) Sqm 105

25

2625

12

Polished Blue Kota Stone flooring skirting laid over 20mm thick base of CM 14 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete

13

For area of each slab from 2001 to 5000 SqCm

30mm thick slab

Sqm 988

35

34580

14

Wall Painting with plastic emulsion paint of approved brand and manufacture to give an even shade

Two or more coats on new work including preparation of base with primer putty lippy complete in all respect Sqm 82

76

6232

15

Applying Exterior Emulsion Paint like ACE APEX or equivalent brand and manufacture of required shade to give an even shade including all scaffolding on prepared surface (excluding water primer)

New Work (Two or more coats) Sqm 119

28

3332

16

Applying one coat of Asian Paints DECO Primer (Water thinnable) of approved brand amp manufacture ic scrapping by sand papering and preparing the even surface on wallwall putty as base for ACE APEX or APEX ULTIMA ic all scaffolding(New Surface) Sqm 24

104

2496

23

17

providing and fixing steel gategrating and grills made of anglesteessqure bars flats or blackpipe with holdfast and fitting complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide kg 83

1250

103750

Demolishing cement concrete including disposal of material with in 50 meter lead

136 or richer mix Cum 319

30

9570

148 or leaner mix Cum 311

20

6220

18

Demolishing RCC work manually by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge

Cum 1085

30

32550

19

Rough chisel dressed stone flooring over 20mm (Av) thick base in CM 16 including pointing with cement mortar 12 (1 cement 2 stone dust) with and admixture of pigment to match the shade of stone with joint thickness upto 15mm

45mm thick red sand stone

Sqm 385

230

88550

20

Providing and fixing 1st quality standard white grey ivory fume red brown light green light blue and other light shades glazed tiles confirming to IS 13753 amp IS 15622 of size 300mm x 200mm in walls floors steps pillars etc laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar)

Catogary-A Kajaria Johnson Somani Orient make Sqm 763

25

19075

24

21

Applying one coat industrial grade bitumen of penetration 2585 of approved quality using 170 kg per Sqm on Damp Proof Coarse after cleaning the surface with brushes and finally with a piece of cloth slightly soaked in kerosene oil Sqm 103

45

4635

22

Providing and Fixing 30 too 40 mm thickk stone chajjas in cement sand mortar 14 including making gola at junction with wall concrete M-15 grade (124 nominal mix drip course

20 mm thick plastering in CM 16 on both Sqm 645

35

22575

23

Providing and fixing steel gate grating and grills made of angles tees square bars flatsor black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide

Kg 83

9750

809250

24

Extra if squarerectangular hollow tubelar sections are used or grill made by flats only

Kg

10

6490

64251

P amp F bolts including nuts and bolts complete

Kg 57

240

13680

25

Painting with ready mix paint of approved brand and manufacture in all shades to give an even shade

New Steel Work Sqm 40

1500

60000

Welding by electric plant cmlength 286

15000

42900

TOTAL OF BSR WORKS CIVIL

3046100

25

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - B- SANITARY WORKS

SL No Specification Unit Rate QTY Amount

1

P amp F GI Pipes (External Work) with GI Fittings excluding union (IS 1239 Mark) including trenching amp refilling earth etc

40mm dia nominal bore A Class

Mtr 338

32 10816

25mm dia nominal bore A Class

Mtr 182

48 8736

2

Making connection of GI distribution Branch with GI main including all Fitting

Beyond 25mm amp upto 100mm dia Each 332 8 2656

3

P amp F Sand ndashcast Floor Trap (Nahni) of (IS1729 mark) of approved qualitymake with socket down or hinged grating including cutting and making good the floor- 100 x 100mm Each

421

4 1684

4

P amp F Gun-metal Full-way Valve (IS778 Mark) or wheel valve of approved make

Gun metal 25mm nominal bore Each 702 4 2808

Gun metal 40mm nominal bore Each 1065 4 4260

5

P amp F PVC Storage Tank ISI Marked (IS 12701) indicating the BIS license No) of approved make with cover 25mm dia 1M long GI over-flow pipe amp 25 Cm long wash out pipe with plug amp socket including making connection etc complete of approved design

1000 litres capacity Each 5437 4 21748

6

P amp F push cock superior quality of approved make

CP brass 15 mm

Each 416

16 6656

TOTAL 5936400

26

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - C-HOTICULTURE WORKS

SL No Specification Unit Rate QTY Amount

1

Supply of dry manure including loading unloading transportation amp stacking at site

Goat dungmanure

Cum

50000

35

17500

2

Supply amp Stacking good earth at site complete including loading unloading amp transportation etc Cum

7500

55

4125

3

Supply of different varities of treeshrubsclimbers according to height and age of the plant at site including loadingunloading amp transportation etc complete

Different flowing plants 900mm to 1500mm Each

1500

115

1725

4

Supply of different varities of bougainvillea in poly bagsearthen pots according to height growth amp age of plant at site including loadingunloading amp transportation etc complete

Local variety of bougainvillea 600 mm to 900mm Each

1500

75

1125

5

Digging pits in ordinary soil amp refilling the same with the excavated earth mixed with manure in the ratio 21 by volume (2 parts of stacked volume of earth after reduction by 20 1 parts of stacked volume of manure after reduction by 8) flooding with water and dressing including removal of surplus earth Each

1000

150

1500

27

(Cost of manure or extra good earth if needed to be paid separately) pit dia 60 cm X 60 cm deep

6

Spreading of manure and good earth in required thickness (cost of manure and good earth to be paid separately) Cum

400

75

300

TOTAL OF HORTICULTURE WORKS

26275

28

SCHEDULE OF QUANTITIES

Name of work Pushkar Market Street- Restoration And Development Works

(Based on item rates)

PART - D- NON SOR WORKS

SL No

Specification Unit Rate to

be Quoted

QTY

Amount

1

Providing and fixing fine dressed sand stoneapproved stone JALIas per existing matching geometrical design including moulding work with fine finishing fixing with thambli by proper adhesive and white cement with pigment including making groove etc complete in all respect

(b) 50mm thick Sqm 45

2

Providing amp fixing ashlar Rain water Spouts (3) lines dressed as per traditional practice existing design approved design size 60 x 30 x 25 cm fixing the rain water spout with lime surkhi mortar 12 with proper slope complete in all respect Each

12

3

Providing amp fixing ornamental stone cladding of approved sand stone with dressing complete as per existing designpatternapproved designfixing with 30mm thickgrinded lime surkhi mortar 12 amp pointing with white cement with araldite and pigment to match shade the stone complete in all respect as per direction of Engineer incharge(75mm thick) Sqm

54

4

Providing and fixing fine dressed sand stone Dasacoping as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect

(c) 75mm to 100mm thick with pan patti design Sqm 320

5

Providing and fixing fine dressed sand stone Cladding (Plain dressing only) as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect including removal of damaged cladding

(a) 50mm to 60mm thick Sqm 180

6

Supply and istallation whiteredapproved shade sandstone dustbin of size 800 mm x 450 mm and height 850 mm with hollow center to hang MS Dustbin of size 400mmx 500mmx 600 mm made of 1mm thick metal sheet fixed to stone pillars with MS chain edged with 50x50x5 mm angle sections including cutting welding and fabrication with priming coat of red oxide and approved ready mix paint of approved shadeStone peices joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 26

29

7

Supply and istallation of RedWhiteapproved shade stone bench of size 1500mmx450mmx450 mm horizontal stone members of size 300mmx400mmx450mm on two sides supporting the horizontal seating stone of 150 mm thickness fixed to vertical stone members joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 35

8

Poviding fixing testing and commisioning of Stainless Steel body bull Storage Capacity in (litres) 150 bull Nominal Cooling Capacity (Litreshr) 150 bull No Of Faucets 2 bull Dimensions 820W x 700D x 1235 H bull Normal Demand (glasses hr) 750 bull Refrigerant R-22 bull Current (Amps) 749 bull Water Overflow (Connections) 12 BSP bull Type Of Compressor Rotary Model No- SDLX15150A make Blue star or similar in make of VoltasOasis

Each 4

9

Providing fixing testing and commissioning of water purification system having auto shut-off e-boiling Voltage Stabilizer bull Type of Treatment- sediment filter active carbon cartridge mineral guard UV chamber bull water flow rate 3ltrminbull ultra- violet lamp of 16 watts bull power rating of 35watt bull Dimensions 355H x 1025D x 307WModel ndash Hi fio Make Eureka Forbes- aquagard or similar in make of livpurekent

Each 4

10

Demolishion of the existing bituminous road surface to a depth of 150 mm and disposal of demolished material with a lift upto 3 m and lead upto 1000 m

Sqm 50

11

Providing and fixing fine dressed sand stone flooring with white sand stone (Bansh paharpurdholpur stone) (panji marked surface) machine cut of approved shade set in pattern over 30mm thick base in cement mortar 16 including pointing with cement mortar 12 (1 cement2 stone dust) mixed with pigment to match the shade of stone with joint thickness upto 5 mm as per existing flloringsample approved by the consultantapproved by (75mm thick)

Sqm 730

12

Providing and Fixing Cobbles stone of lime sand stone size 100X100MM and theakness of 70 to100mm on path way open court yards of color shade approved by the consultant over cement mortar 13 ( 1 cement3 course sand) keeping 10mm joint between cobbles filled with cement mortar 13 ( 1 cement3 course sand) the mortar should remain recessed by 5mm from the top surface of the cobble stone complete in all respects as per design and details provided by the consultant

Sqm 1650

13

Supply and installation of sanstone signage 450x200 mm of redwhiteapproved shade Sandstone 75 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete with fixing with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 6

30

14

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 450mmx2400mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved with ornamentation in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

15

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 650mmx1200mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

16

Heritage signage shall be etched on to Dulmera stone plaque of size 18m x 14m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 4

17

Signage shall be etched on to Dulmera stone plaque of size 18m x 10m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 12

18

Providing and fixing MS steel sheets 3 mm thickness on to MS anfgles flats tees and hollow sections with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Kg 10640

19

Providing and fixing MS perforated sheets 3 mm thickness with diamondround shaped perforations as per sample approved by the consultant with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Sqm 90

20

Painting of shop signages with lettering in hindienglish and ornamental design patterns in ready mix paint of approved brand and manfacture in all shades to give an even shade as per drawings and details provided by the consultant

Sqm 560

21

Flush pointing over joints of dressed stone cladding chajjas jali etc with neat cement sand amp colour including racking the joints as per Jodhpur practice including all leads and lifts with grinded mortar of lime putty and stone powder mixed in 11 ratio and gur methi gugal etc are to be mixed as per old traditional practice

Sqm 75

22

Khamira Colour Washing as per old traditional practice to prepare the Khamira the lime should be slaked at least for 7-10 days and regularly it should be stirred by adding cured Gugal for non-synthetic colour adding gum (babool gum) as per specificationThen applying prepared solution on walls three to four thin coats as desired finishing

Sqm 1750

31

23

Providing amp applying Lime kara 12 (1lime cream 2 Zikki powder) grinding mortar with grinding millmanually on lime baseon all flat surface in two coatsFirst coat applying 3mm to 4mm thick and curing properly at least 7 dayssecond finishing coat done after 7days of previous coat as per traditional practice(thickness not more than 6 mm)

Sqm 155

TOTAL OF NON SOR WORKS

2

6 Development of camping ampconstruction of log huts at Naliasar Sambhar Jaipur

40000 800 5000- 1000- 18 months 26816 to 29916

29916

7 Solar street lighting at Naraina Sambhar Jaipur

1200 024 1000- 1000- 7 months 26816 to 29916

29916

8 Solar street lighting for approach road for Bi-cycle Track

7000 140 5000- 1000- 12 months 26816 to 29916

29916

The undersigned reserves full right to cancel all or any part of the NIT without assigning any reason Terms amp Conditions

1 The bid shall be in two part ie (A) Technical bid ( 2) Financial bid for item(A )serial no1 679 amp for item(B) serial no2

3456 and for rest items ie(A)23458101112amp(b)178 financial bids are acceptable The technical bids will first be

opened on due date ie 260916 amp 290916 as mentioned above at 400 PM In case of any holiday on the opening date

of the tender the same shall be opened on next working day on same time After scrutiny and declaration of

qualifiedsuccessful bidders the financial bids will be opened for which the successful bidders will be informed

2 The registration certificate in appropriate class amp trade Sales tax PAN NO EPF REGISTRATION NO service tax

registration copies are to be enclosed in technical bid

3 The Earnest money amp tender cost should be submitted in the name of General Manager-Works RTDC Ltd Jaipur and

e-processing fees in the name of MD RISL Jaipur in the form of Bank Demand Draft shall be deposited in person in

the office of Generam Manager-Works RTDC LtdJaipur upto 200 PM upto dated 2692016 amp 2992016

respectively and information thereof will also be given on website with tender document

4 The participants firms should have similar works experience of 13 value of the works as above in last five years

(including current year if opted by the bidder) and attested copies of certificate of satisfactorily completion of work

should also be given

5 The bidder must ensure that all the information required in the documents is furnished by him complete in all

respects He would not be allowed to withdraw any documents or to rectify any information after submitting the bid

6 The copy of balance sheet of the firm for last three years duly certified by CA showing turnover of the firm is to be

given

(Madhav Sharma) GENERAL MANAGER-WORKS

RTDC LTD JAIPUR No Date Copy to following for information amp na-

1 PS to Director Tourism Govt of Rajasthan Jaipur

2 PS to Managing Director RTDC Ltd Jaipur

3 EO to Executive Director (Finance) RTDC Ltd Jaipur

4 PA to Executive Director RTDC Ltd Jaipur

5 Divisional Engineer RTDC Ltd Jaipur

6 Assistant Accounts Officer Works Division RTDC Ltd Jaipur

7 Cashier WD RTDC Ltd Jaipur

8 Computer Operator Computer section to upload the NITBID on website as mentioned above

(Madhav Sharma)

GENERAL MANAGER-WORKS

RTDC LTD JAIPUR

3

RAJASTHAN TOURISM DEVELOPMENT CORRPORATION

HOTEL SWAGATAM CAMPUS NEAR RAILWAY STATION JAIPUR PHONE NO 51157802202586 FAX 0141-22010452204065

E-TENDER NOTICE NO 082016-17 Rajasthan Tourism Development Corporation Limited ( RTDC) Jaipur invites sealed competitive bids for the Various Development refurbishment restoration amp construction Works at Ajmer-Pushkar (PRASAD YOJNA) amp Sambhar Town Jaipur ( Swadesh Darshan Yojna) from the contractors registered with State Government Government of India and undertaking of statecentral Government in appropriates class amp trade The detailed information can be seen at website wwwrtdctourismrajasthangovin amp sppprajasthangovin The tender documents can be downloaded to httpeprocrajasthangovin from dated 2682016 to 2692016 for Prasad Yojna and from dt 2682016 to 2992016 for Swadesh Darshan Yojna upto 200 PM The undersigned reserves the full rights to reject all or part thereof the tender

(Madhav Sharma) GENERAL MANAGER-WORKS

RTDC LTD JAIPUR No Date Copy to following for information amp na-

1 PS to Director Tourism Govt of Rajasthan Jaipur

2 PS to Managing Director RTDC Ltd Jaipur

3 EO to Executive Director (Finance) RTDC Ltd Jaipur

4 PA to Executive Director RTDC Ltd Jaipur

5 Divisional Engineer RTDC Ltd Jaipur

6 Assistant Accounts Officer Works Division RTDC Ltd Jaipur

7 Cashier WD RTDC Ltd Jaipur

8 Manager RTDC Ltd Publicity Section Jaipur for publication as per Rajasthan Transparency in Public

Procurement Act -2013 for serial No(A) 17913 and (B)2356 in One leading regional daily news

paper One state level leading daily news paper and one All India level daily news paper and for rest

serial no ei(A)234568101112ans (B) 1478 in one leading regional daily news paper and One

state level daily news paper

(Madhav Sharma) GENERAL MANAGER-WORKS

RTDC LTD JAIPUR

4

RAJASTHAN TOURISM DEVELOPMENT CORRPORATION

HOTEL SWAGATAM CAMPUS NEAR RAILWAY STATION JAIPUR PHONE NO 51157802202586 FAX 0141-22010452204065

GENERAL TERMS amp CONDITIONS

SN

1 Tenders invited from Contractor having registration in Government Semi-Government or any other Public Sector Undertakings

2 The work shall include all lead and lifts at site of work

3 The work shall be strictly carried out as per the tender specification amp Indian Standard specifications

4 Any kind of damage to the existing structure during the execution of the work shall be made good by the contractor at no extra cost

5 Electricity and water for execution of the work shall be arranged by the contractor at his own cost

6 The contractor shall be fully responsible for compliance of Labour laws EPFESI amp contribution towards labour as well as himself and insurance etc for the workers engaged by him on the works

7 Conditional tender shall not be considered and shall be liable to be rejected without taking any cognizance thereof

8 Quantities of any item may be increased decreased or deleted as per site conditions and as per instruction of Engineer-in-charge Nothing can be claimed extra for such changes in the item and also in the variation of quantities

9 All the instructionsspecifications issued by RTDC authorities from time to time regarding construction addition or alteration shall be binding upon the contractor

10 The contractor shall take all the necessary measures and will be responsible for the safety for the Labour at work and existing structure etc

11 Skilled man power shall be provided at site to engineer-in-charge for checking of lines levels and specifications etc who shall be at the disposal of the engineer-in-charge If not provided by the contractor than same shall be engaged by the Corporation on Contractorrsquos cost and the payment made shall be recovered from the contractor

12 Contractor is to abide by the instruction issued by the Engineer-in-charge amp Client Department Authority regarding collectionstorage of material at site

13 All service lines ie water supply sewer telephone Electricity etc at the site shall have to be taken care of by the contractor during the execution Any damage to these lines shall have to repaired by the contractor

14 All finishing material shall be got approved by the Clientcompetent authority before execution

15 All hidden works shall be got checked necessarily from the engineer-in-charge before covering them for which the contractor shall inform the engineer-in-charge well in time

16 Final payment shall be made only after satisfactory handing over of the said work to the clientdepartment All materials shall be got tested before use by the contractor at his own cost as directed by Engineer-in-charge

17 Defect liability shall be 1 year for the said work

18 The Tenderers are advised to visit the site before quoting the rates and to seek any clarification regarding said work they can contact the engineer-in-charge during office hours

19 The rates quoted by the contractor shall be deemed to be inclusive of Sales tax Income Tax Service tax Royalty Labour cess amp any other taxdutycess applicable by law at the time of payment and shall be borne by the contractor for performance of the contractor The employer shall deduct such taxes as per applicable law

20 The Photographsrsquo of site before starting of the work and after completion of work will be provided in two copies by the contractor at his own cost amp no extra cost will be paid by department

21 The rates quoted by the contractor will remain valid upto four months Validity period on the written consent of the contractor can be extended

Signature of Contractor with seal and full address with mobile No

General Manager-Works RTDC Ltd Jaipur

5

RAJASTHAN TOURISM DEVELOPMENT CORPORATION LIMITED JAIPUR

(WORKS DIVISION)

TENDER DOCUMENT (Technical Bid)

E-Tender (NIT No) 082016-17

Name of work- Pushkar Market Street- Restoration And Development Works

Mirror

Signature of Contractor

6

UNDERTAKING

THE GENERAL MANAGER ndashWORKS RTDCLTD JAIPUR

Dear Sir

Having examined and understood terms amp conditions the plans specifications and Schedule of

Quantities for the work prepared by your Architects Engineers IWe hereby offer to execute the work at the

rates which IWe have quoted for respective items specified IWe herewith enclose myOur DD no------------

----------dated---------------Name of bank-----------------------------------------------------------for Rs

as earnest money for execution at myour tendered rates

In the event of this Tender being accepted IWe agree to enter into agreement as amp when required

to execute the work

Yours Faithfully

CONTRACTOR (Name amp Full address with seal)

7

MEMORANDUM IWe hereby tender for execution for the work within time specified and rates entered in the schedule G in all respects in accordance with the specifications designs drawings and instructions in writing referred to herein and in the annexed conditions with such materials as are provided for by and in all other respects in accordance with such conditions so far as applicable IWe have visited the site of work amp IWe amare fully aware of all the difficulties amp conditions likely to effect carrying out of the work IWe have fully acquainted myselfourselves about the conditions in regard to accessibility of site and quarrieskilns nature and the extent of ground working conditions including stacking of material installation of TampP conditions affecting accommodation and movement of labour etc required for the satisfactory execution of this contract (a) Name of work (b) Estimated Cost (in figures) Rs

(in words) Rs

(c) Earnest Money Rs (d) Security Deposit (Including Earnest Money) Rs NOTE (1) Security deposit to be 10 in the form of cash or deduction to be made from running bills (2) Time allowed for the work to be reckoned from the 10

th day after the date of written order to

commence the work Should this tender be accepted in whole or in part IWe hereby agree to abide-by and fulfill all terms and provisions of the conditions of contract annexed hereto and in the NIT or in default thereof to forfeit and pay to the General Manager (Works) Jaipur the sum of money mentioned in the said conditions A sum of Rs is enclosed herewith as earnest money This amount of earnest money shall absolutely be forfeited to Department without prejudice to any other right or remedies should IWe fail to commence the work specified in the above memorandum or should IWe not furnish performance guarantee in cash or in form or Bank guarantee at the time of execution of agreement specified in the above memorandum in accordance with the said conditions of contract

Signature of Contractor The above tender is hereby accepted by me

General Manager-Works

RTDCLTD JAIPUR

8

DIRECTIONS FOR GUIDANCE OF CONTRACTORS

1 All works proposed for execution by contract will be notified in a form of invitation to tender pasted on a board hung up in the

office and signed by General Manager-Works RTDC LTD Jaipur or duly authorized officer

The form of invitation to tender will state the work to be carried out as well as the date of submitting and opening of tenders

amp the time allowed for carrying out the work also the amount of earnest money to be deposited with the tender and the

amount of security deposit to be deposited by the successful tenderer and the percentage as per PWFampAR Govt of

Rajasthan to be deducted from the bills copies of the specifications designs and drawing and estimated ratesscheduled

rates and any other documents required in connection with the work for the purpose of identification by the Rajasthan

Tourism Development Corpn Jaipur Drawings shall also be open for inspection by the contractor at the office of the General

Manager9 Works) Rajasthan Tourism Development Corporation Ltd Jaipur or duly authorized Engineer during office hours

2 In the event of the tender being submitted by a firm it must be signed separately by each partner thereof or in the event of

the absence of any partner it must be signed on his behalf by a person holding power of attorney authorizing him to do so

3 Receipt for payment made on account of a work when executed by a firm must also be signed by the several partners

except where the contractor are described in their tender as a firm in which case the receipt must be signed in the name of

the firm by one of the partners or by some other person having to give effectual receipts for the firm

4 Any person who submits tender shall fill up the usual printed form stating at how much percent above or below the rates

specified or on item rates he is willing to undertake the work Tenders which propose any alteration in the work specified in

the said form of invitation to tender or in the time allowed for carrying out the work or which contain any other conditions of

any sort will be liable to rejection No single tender shall include more than one work but person who wish to tender for two

or more works shall submit a separate tender for each work Tender shall have the name and number of the work to which

they refer written outside the envelope

5 The General Manager-Works RTDC Ltd Jaipur or other duly authorized Engineer will open the tenders in the presence of

any intending contractors or their authorized representative who may be present at the time and will enter the amounts of the

several tenders in the Register of tenders in the event of the tender being accepted A receipt for the earnest money

forwarded therein shall there upon be given to the contractor who shall there-upon for the purpose of identification sign

copies of the specifications and other documents In the event of a tender being rejected the earnest money forwarded with

such unaccepted tender shall be returned to the contractor

6 The General Manager-Works RTDC Ltd Jaipur or other authorized Engineer shall have the right of rejecting all or any of

the tenders without assigning any reasons

7 The accompanying schedules of quantities in ldquoGrdquo Schedule are the architects estimated quantities for the work The

contractors shall attach histheir OWN prices for the each item in column for rates left blank and shall money out the same in

the final column amp totals HeThey shall fill up properly the form of tender and the schedule of quantities without adding any

stipulations thereto The tender shall show the total amount arrived at in the manner above described The tender Notice to

Contractors conditions of contract Specifications and the Schedule of quantities and rates etc shall all be embodied in and

shall form a part of the contract

8 The quantities contained in the Schedule are only approximately correct If more or less quantities are actually done on the

work the contractors shall be paid for the same at the rates tendered by himthem in the Schedule of Rates The work as

actually done will be measured by the contractors qualified engineer and bill furnished to the General Manager(Works)

RTDC Ltd Jaipur which in turn will get it checked by the Engineer in charge time to time and will be paid for as provided in

the Special Condition of Contract after deducting SD as per PWFampAR provisions

Signature of Contractor

9

GENERAL CONDITIONS OF CONTRACT 1 All the materials used shall be of approved quality and to the entire satisfaction of the General Manager-works RTDC Ltd

Jaipur

2 The General Manager-works RTDC Ltd Jaipur or the Engineer in charge reserves right for any additions and alternations or

omission in the tender and execution of works In case the Department supplies the material specified in the tender recovery for

the cost of supplied material from subsequent running Bill will be made

3 The Department shall pay to the contractor as detailed in special conditions of contract

4 The contractors isare to set out the work in accordance with the plans All lines to be accurately marked or otherwise to the

satisfaction of the Engineer in charge

5 The contractors shall meet the Engineer in charge or his representative at the works site whenever required

6 The contractors shall maintain and be represented on site at all times by a responsible and efficient EngineerArchitect who

thoroughly understands all the trades enrolled The Engineer in charge reserves the right to dismiss the Foremen and any

workmen who in his opinions are not sufficiently skilled or who neglect or refuse to obey instructions

7 The contractors shall be given one set of the plans free of charge

8 The General Manager-works RTDC Ltd Jaipur reserves the right of altering the drawings and nature of the work and adding

to or omitting any item of work or having portions of the same carried out departmentally or otherwise and such alterations or

variations shall be carried out without prejudice to the contract

9 The General Manager-works RTDC Ltd Jaipur reserves to the right to increase or decrease quantity of work or omit some part

of the work without violating the contract and for which he will not be held liable to compensation to the contractors

10 All plants machines and other equipments are to be arranged by contractor for the work

11 Any percentage rate tender containing item-wise rates and any item rate tender containing percentage rate below or above

estimatedscheduled rates will be summarily rejected

12 The Conditions of Contract shall govern sales tax or any other tax on materials or Income Tax in respect of the contract

Deduction of Income Tax at source will be made as per provisions of the Income Tax Act in force from time to time

13 If on check there are differences between the rate quoted by the Contractor in words and figures or in the amount worked out

by him the following procedure shall be followed -

(i) Where there is a difference between the rates in figures and words lower of the two rates shall be taken as valid and correct

rate

(ii) When the rate quoted by the contractor in figures and in words tallies but the amount is not worked out correctly the rate

quoted by the contractor shall be taken as correct and not the amount worked out

(iii) While quoting rates if raterates against any item or items are found to be omitted the rate given in the Schedule G by the

Department for such items will be taken into account while preparing comparative statement and contractor shall be bound to

execute such item on G Schedule rates

(iv) In case where percentage is given but the above or below not scored the tender will be non-responsive

14 The Contractor shall read the specifications and study the working drawings carefully before submitting the tender

15 After acceptance of the tender the Contractor or all partners (in the case of partnership firm) will append photographs and

signatures duly attested at the time of execution of agreement

16 Experience into similar nature of works for which tender invited and fulfill conditions of NIT

17 Contractors shall submit only unconditional tenders Conditional tenders are liable to be rejected similarly

Signature of Contractor

General Manager-Works

10

SPECIAL CONDITIONS OF CONTRACT

1 The Technical bid will be opened first on the day mentioned in the NIT Bidders will be evaluated as per norms set for

qualification in Technical bid and Financial bids of only those bidders will be opened which were qualify in the technical bid

2 Contractors bidding for the work should be reputed experienced contractors fulfilling the requirements laid down in the NIT

and well versed and working in the field Only those bidders will be considered qualified in the Technical bid who have

executed similar works to the tune of at least 13rd of the estimated value of the work (published in NIT) during last five

years (updated to current price level 100 per annum) and have the necessary technical expertise and support

machinery and administrative and financial capability to satisfactorily execute works in question for which they are bidding

3 The decision of the General Manager-works RTDC Ltd Jaipur or his representative on pre-qualification in the Technical bid

will be final amp binding

4 All raw materials will have to be brought to the site and all carving work will have to be executed only at site to qualify for

payment of running bills No payment of any material at or work done at place other than the site of work will be made

unless such material is brought to site and found acceptable to be used on the work

5 General conditions of contract special conditions of contract and specification of work as appended herewith in addition to

General condition of agreement will be applicable on this work In addition the PWD specifications will also be applicable

as relevant to the particular item of work

6 Work shall be carried out as per approved drawings and designs to be provided by the departmental architect engaged

7 Architectural work for the construction shall be of a high standard quality and pattern (class and style) to match the existing

work

8 All work shall be carried out as per approved samples of each element

9 The exposed surface of stonework will be suitably protected from damage disfigurement during the course of work and will

be cleaned and washed removing all spots etc for final acceptance on completion

10 All scaffolding shuttering TampP etc for the work shall have to be arranged by contractor at his own cost

11 The time for completion of work as given in the NIT shall be strictly adhered to and the work so planned as to be completed

within the scheduled period The contractor shall provide with a time schedule to the department for progressing with and

completing various stages of the work

12 Only best quality stone and other building materials shall be used in construction and all such material will be got approved

from the Engineer in-charge before use

13 Quantities of individual items can be increased invariably or even reduced withdrawn and specification and designs altered

at the discretion of Engineer in-charge and contractor will not be entitled to any compensation thereof for such alteration For

extra items if any rates will be decided based on market analysis to be provided by contractor

14 Contractor will give notice before any work is covered up Bad work will have to be redonereplaced at contractors cost

15 Full scale drawings form work for architectural stone work to be developed from drawings wherever necessary shall be got

prepared by contractor for prior approval before Signature of contractor

construction at his own cost and he will get these approved from the Engineer in-charge General Manager-Works RTDC

Ltd Jaipur who shall however be at liberty to modify such drawings form work and no extra payment shall be made for this

16 It will be the contractors responsibility to get the drawings formwork and sample of individual itemselements of work

approved from the departmental Architect Engineer before proceeding with manufacture of the same at site

17 The contractor shall provide adequate safety measures and proper insurance for his labour working at site and it shall be

done by contractor at his end Contractor shall settle all labour disputes at his own level The contractor shall observe all

labourfactory laws in force

18 Security deposit will be recovered from each running bill of contractor as per provisions of PWFampAR Earnest money will be

adjusted in the security deposit amount Security deposit shall be returned after one year satisfactory completion of the work

and on satisfactory performance of structure

19 No escalation will be payable even if the completion period exceeds that as stipulated

20 In case of unsatisfactory work by contractor or deliberate delaying the work without valid reasons the contract will be liable

to be terminated at the stage up to which acceptable work is done and paid for with no compensation of any sort payable to

contractor for withdrawal at that stage and possession of work executed at site will be taken over by Department In case of

any dispute the decision of the Department will be final and binding on the contractor

21 The bidder has to furnish with his technical bid (In prescribed Performarsquos Schedule 1-5)

Full information regarding financial resources and capability in Schedule-1 herewith(Photocopy to be made out of schedule)

a) Details of works of similar type and magnitude completed in last 5 years by the tenderer in Schedule II (Photocopy to be

made out of schedule)

b) Details of works bids and works to be completed in Schedule-III (Photocopy to be made out of schedule)

c) Details of technical supervisory personnel and master craftsman craftsman which he proposes to utilize for this work in

Schedule IV (Photocopy to be made out of schedule)

d) Details of plant and equipment proposed for use in the work in Schedule V (Photocopy to be made out of schedule)

11

e) The bidder should demonstrate that they have adequate financial resources (Over draft Credit Limit letter from bank)

Signature of Contractor

22 Bid capacity

(i) Bidders who meet the minimum qualifying criteria are to be evaluated further for Bid capacity as under -

(a) Maximum value of similar works executed in any one year during the last five years including current year (updated to the

current price level) extracted from schedule II which will take into account the completed and on going works

(b) Value of the existing commitments works (complete or partial) to be completed in the coming 12 months (up dated to the

current price level) Extracted from schedule III

(ii) Bid Capacity=(AxNx3-B) where

A=Maximum value of works executed in any one year during the last five years (updated to present price level) taking into

account the completed as well as works in progress

N=Number of years prescribed for completion of the works for which bids are invited herein (in years)

B=Value at present price level of existing commitments and on going works (at hand) to be executed during N period

The bidder will be post qualified only if his bid capacity is equal or more than the cost of work in question No contract may be

awarded to bidder lacking the financial and technical resources to undertake the work The decision of General Manager

(Works) Rajasthan Tourism Development Corporation Ltd Jaipur in this regard will be final and binding

NOTE -The present price level for turn over cost of completed works and amount of similar nature works (of a value at least 13rd of the estimated value of the work published in NIT during last five years) the previous years value shall be given weightage of 10 per year as following for the tendersbids invited by this department ndash

(a) For last year - 100 (b) For one year before - 110 (c) For two year before - 121 (d) For three year before - 133 (e) For four year before - 146

For current year the price level shall be 10

23 The right to qualify or not to qualify any or all the bidders without assigning any reason is reserved with the General Manager

(Works) Rajasthan Tourism Development Corporation Ltd Jaipur

24 Determination of Responsiveness

a) Prior to the detailed evaluation of bids the General Manager (Works) Rajasthan Tourism Development Corporation Ltd

JAIPUR will determine whether each bid is substantially responsive to the requirements of the bidding documents

b) For the purpose of this clause a substantially responsive bid is one which has required capacity capability and financial

resources and whose bid conforms to all the terms conditions and specifications of the bidding documents without

material deviation or reservation A material deviation or reservation is one which affects in any substantial way the

scope quality or performance of the works or which limits in any substantial way the General Manager (Works)

Rajasthan Tourism Development Corporation Ltd JAIPURrsquoS right or the Bidders obligations under the contract and the

rectification of which deviation or reservation would effect unfairly the competitive position of other bidders presenting

substantially responsive bids

c) if a bid is not substantially responsive to the requirements of the bidding documents it will be rejected and may not

subsequently be made responsive by the bidder having corrected or withdrawn the nonconforming deviation or

reservation

25 Construction programme ndash

1) Within the time stated in this contract the Contractor shall after the acceptance of his tender submit to the General Manager

(Works) Rajasthan Tourism Development Corporation Ltd JAIPUR for approval programme together with bar chart PERT

chart

2) proposed deployment of machinery etc showing the order of procedure in which he proposes to carryout the works The

contractor shall provide in writing general description the arrangements deployment of equipment work planning and

methods which he proposes to adopt for the execution of the works

3) If at any time it should appear to the Department that actual progress of the work does not conform to the approved

programme referred to in sub-clause (1) of this clause the Contractor shall produce at the request of the Department a

revised programme showing the modifications to the approved programme necessary to ensure completion of the works

within the time for completion

4) The submission to and approval by the Department of such programmers or the furnishing of such particulars shall not

relieve the contractor of any of his duties or responsibilities under the contract

5) The contractor shall submit within 30 days after the date of notice to proceed with the work a detailed construction

programme to suit the programme of completion for the entire contract period This programme shall be reviewed and

revised every half year at the beginning of the working season to plan timely action for making up the slippages occurred in

the previous season to suit the stipulated period of completion (including mile stones) as extended from time to time

26 Materials workmanship period and certificates of Maintenance and Defect Liability etc

All materials and workmanship shall be of the respective kinds described in the contract and in accordance with the

ArchitectsEngineer instructions and shall be subjected from time to time to such tests as the Engineer may direct at the

place of manufacture or fabrication or on the site or at such other place or places as may be specified in the Contract or at

all or any of such places The contractor shall install quality control laboratory and provide such assistance instruments

machines labour and materials as are normally required for examining measuring and test in any work and the quality

weight or quantity of any material used and shall supply samples of materials before incorporation in the works for testing as

may be selected and required by the Engineer-in-charge

12

Signature of Contractor

27 Period of maintenance and Defects liability

The Contractor shall be responsible to make good within such period as maybe stipulated by the Engineer in-charge any

defect which may develop or may be noticed during period of maintenance of 12 months from the certified date of

completion and which is attributable to the contractor All notice of such defect shall be given to the Contractor promptly In

case the contractor fails to make good the defects the Engineer in-charge may employ other persons to make good such

defects and all expenses consequent thereof and incidental thereto shall be recoverable from the Contractor In the event

the employer takes over portions of work as they are completed the liability of the contractor under this clause for these

portions shall extend to a period of 24 months from the actual dates on which portions of the works are taken over

28 The successful biddercontractor is required to undertake detailed photo recording documentation by still photography

videography of the entire work prior to commencement and the same has to be deposited with the Engineer in charge of

RAJASTHAN TOURISM DEVELOPMENT CORPORATION JAIPUR in two copies immediately Before dismantling any old

work to redo this still photography with specifically putting some identity mark number of the portion by any specified means

has to be done and this to be got checked and certified by Engineer In charge and recorded specifically in the measurement

book (MB) A written permission from the Engineer in charge before commencement of executing such work is essential for

execution as well as for payments

During the work in progress and after its completion also photo documentation is necessary and the photos before amp after

completion of portion of work are essentially to be enclosed with the bill for payment

Signature of Contractor

GENERAL MANAGER (WORKS)

13

SCHEDULE-I

FINANCIAL RESOURCES AND CAPABILITY

(PURSUANT TO CLAUSE 26) 1 Name of Applicant

2 Name of Partner Director

3 Capital

(a) Authorised

(b) ii

4 (a) WhetheCategory of Enlisted in Govt

(b) Details Details of the work completed and applicants performance record for last five years

(information to be furnished in Schedule II in India

(c) Details of works in hand applicants performance record for last five years (Information to be

furnished in Schedule-III)

5 Furnish Balance Sheet and profit and loss statement with auditorrsquos report for the last three years

6 The information on the following aspects should be specifically furnished

(i) Working capital and net worth

(ii) Turnover for the years

a

b

c

(iii) Gross income in years in India

(i)

(ii)

(iii)

(iv) Quick ratio or acid test ration (Quick assets to current liabilities)

7 What is the maximum annual turnover of the project that you can handle (Financial Projection)

8 Have you ever been denied tendering facilities by any Governmental DepartmentPublic Sector

undertaking

(If yes Please give details)

9 List of your source of finance

10 Certificate of financial soundness by Bank

11 Name and address of Bank from whom reference can be obtained

12 Have you ever been declared bankrupt

(if yes please give details)

Signature of Contractor

14

SCHEDULE-II WORKS OF SIMILAR MAGNITUDE TO THE WORK UNDER CONSIDERATION COMPLETED BY THE

APPLICANT IN LAST FIVE YEARS IN INDIA

(Pursuant to Clause 26)

SNo Na

me

of

wor

k

Place

amp

State

Tender

awardi

ng

Agency

Tender

ed Cost

Stipulate

d time of

Completi

on

Time in

which

complete

d

Date

of

comp

letion

Reason

for

Delay

Principal

features

of work

done

Value of

work done

1 2 3 4 5 6 7 8 9 10 11

Year

Year

Year

Signature of Contractor

15

SCHEDULE-III WORKS TENDERED FOR amp WORKS TO BE COMPLETED AS ON THE DATE OF SUBMISSION OF

APPLICATION IN INDIA

(pursuant Clause 26)

SNo Name

of

work

Place

amp

State

Work on Hand Work tendered for

Tender

Cost amp

Date

or

award

Stipulated

period of

Completion

Cost of

work

remaining

to be

executed

Antici

pated

Date

of

compl

eted

Estimate

d cost

(Rs In

Lakh)

Date

when

decisio

n

expecte

d

Stipulate

d Date

period of

Completi

on

Remar

ks

1 2 3 4 5 6 7 8 9 10 11

Year

Year

Year

Signature of Contractor

16

SCHEDULE- IV

Details of Key Personnel intended to be employed for this work

(use separate sheet if necessary)

(Pursuant to clause 26)

S No Name of Person Qualification Designation Experience Work to be

put on

A Technical Personnel

(1)

(2)

(3)

(4)

B Administrative Personnel

(1)

(2)

(3)

(4)

C Master Craftsmen

(1)

(2)

(3)

(4)

D Craftsmen

(1)

(2)

(3)

(4)

E Any other (1)

(2)

(3)

(4)

Signature of Contractor

17

SCHEDULE- V

DETAILS OF MAJOR ITEMS OF CONSTRUCTION PLANT AVAILABLE FOR THIS WORK

S No

Particulars Make Year of manufacture

Nos Whether owned or confirmed lease

1 Lime mortar Mill

2 Scaffolding Material

3 Movable Gantry

Crane etc

4 Any other TampP for

the purpose

5

6

7

8

Signature of Contractor

18

RAJASTHAN TOURISM DEVELOPMENT CORPORATION LIMITED JAIPUR

(WORKS DIVISION)

TENDER DOCUMENT (Financial Bid)

E-Tender (NIT No) 082016-17

Name of work- Pushkar Market Street- Restoration And Development Works

Restoration Conservation work Stained GssMirror

Signature of Contractor

19

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works

(Based on PWD BSR CIVILElectrical Ajmer Circle - 2013 and item rates)

SCHEDULE -G

GENERAL ABSTRACT

SNO WORK AMOUNT

1

PART A- CIVIL WORKS BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

304610000

2

PART B- SANITARY WORKS BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

5936400

3

PART C- HORTICULTURE BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

2627500

4

PART D-NON BSR ITEMS ( CIVIL AND ELECTRICAL)

GRAND TOTAL

I we hereby agree to execute the work PART A In figures Above Below In words

Above below PART B In figures Above Below In words

Above below PART C In figures Above Below In words

Above below PART D In figures Above Below In words

Above below

General Manager Works

RTDC Ltd Jaipur

Signature of the Contractor With Full Postal Address

20

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works

(Based on PWD BSR Civil Ajmer Circle - 2013)

PART A- CIVIL WORKS

SL No Specification Unit Rate QTY Amount

1

Surface Dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr and lift up to 15 Mtr All kinds of soil 100Sqm 437

26

11362

2

Surface Dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr and lift up to 15 Mtr All kinds of soil Cum 127

30

3810

3

Filling available excavated earth (excluding rock) in trenches plinth side of foundation etc in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift Cum 61

12 732

4

Providing and laying in position cement concrete including curing compaction etc complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level

M15 grade Nominal Mix (with graded stone aggregate 20mm nominal size) Cum

3438

230

790740

5

Random Rubble stone masonry for foundation and plinth in Cement Sand mortar above 30 CM thick wall in

21

Cement Mortar 13 ( 1-Cement 3-Sand) Cum

2193

35

76755

6

Random Rubble stone masonry for superstructure above plinth level one storey height above 30cm thick walls in

Cement Mortar 13 ( 1-Cement 3-Sand) Cum

2686

135

362610

7

Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor three level including curing compaction finishing with rendering in cement sand mortar 13 (1 cement 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement for -

Beams suspended floors roofs griders having slopes up to 15ordm landings balconies shelves chajjas lintels bands plain windows sills staircases and spiral staircases etc

M20 grade Nominal Mix

Cum 5138

45

231210

8

Centering amp shuttering with plywood or steel sheets including strutting propping bracing both ways with wooden members and removal of formwork for upto floor three level for

Suspended floors roofs landings staircases balconies girders cantilevers bands coping bed plates anchor blocks sills chhajjas lintel beam etc Sqm 222

60

13320

9

Providing and fabricating reinforcement using steel of SAILVIZAK-RINLTATA TISCONESSARZINDAL VIJAINAGAR IS 1786-1986 for RCC work including straightening cutting bending placing in position and binding (including cost of binding wire) all complete up to floor three level

22

Thermo-Mechanically Treated bars (Conforming of relevent IS code) Kg 78

2630

205140

10

Plaster on new surface on wall in cement sand mortar 13 including racking of joints etc complete fine finish

20mm thick Sqm 161

150

24150

11

6mm thick cement plaster to ceiling of mix 13 (1cement 3 fine sand) Sqm 105

25

2625

12

Polished Blue Kota Stone flooring skirting laid over 20mm thick base of CM 14 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete

13

For area of each slab from 2001 to 5000 SqCm

30mm thick slab

Sqm 988

35

34580

14

Wall Painting with plastic emulsion paint of approved brand and manufacture to give an even shade

Two or more coats on new work including preparation of base with primer putty lippy complete in all respect Sqm 82

76

6232

15

Applying Exterior Emulsion Paint like ACE APEX or equivalent brand and manufacture of required shade to give an even shade including all scaffolding on prepared surface (excluding water primer)

New Work (Two or more coats) Sqm 119

28

3332

16

Applying one coat of Asian Paints DECO Primer (Water thinnable) of approved brand amp manufacture ic scrapping by sand papering and preparing the even surface on wallwall putty as base for ACE APEX or APEX ULTIMA ic all scaffolding(New Surface) Sqm 24

104

2496

23

17

providing and fixing steel gategrating and grills made of anglesteessqure bars flats or blackpipe with holdfast and fitting complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide kg 83

1250

103750

Demolishing cement concrete including disposal of material with in 50 meter lead

136 or richer mix Cum 319

30

9570

148 or leaner mix Cum 311

20

6220

18

Demolishing RCC work manually by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge

Cum 1085

30

32550

19

Rough chisel dressed stone flooring over 20mm (Av) thick base in CM 16 including pointing with cement mortar 12 (1 cement 2 stone dust) with and admixture of pigment to match the shade of stone with joint thickness upto 15mm

45mm thick red sand stone

Sqm 385

230

88550

20

Providing and fixing 1st quality standard white grey ivory fume red brown light green light blue and other light shades glazed tiles confirming to IS 13753 amp IS 15622 of size 300mm x 200mm in walls floors steps pillars etc laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar)

Catogary-A Kajaria Johnson Somani Orient make Sqm 763

25

19075

24

21

Applying one coat industrial grade bitumen of penetration 2585 of approved quality using 170 kg per Sqm on Damp Proof Coarse after cleaning the surface with brushes and finally with a piece of cloth slightly soaked in kerosene oil Sqm 103

45

4635

22

Providing and Fixing 30 too 40 mm thickk stone chajjas in cement sand mortar 14 including making gola at junction with wall concrete M-15 grade (124 nominal mix drip course

20 mm thick plastering in CM 16 on both Sqm 645

35

22575

23

Providing and fixing steel gate grating and grills made of angles tees square bars flatsor black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide

Kg 83

9750

809250

24

Extra if squarerectangular hollow tubelar sections are used or grill made by flats only

Kg

10

6490

64251

P amp F bolts including nuts and bolts complete

Kg 57

240

13680

25

Painting with ready mix paint of approved brand and manufacture in all shades to give an even shade

New Steel Work Sqm 40

1500

60000

Welding by electric plant cmlength 286

15000

42900

TOTAL OF BSR WORKS CIVIL

3046100

25

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - B- SANITARY WORKS

SL No Specification Unit Rate QTY Amount

1

P amp F GI Pipes (External Work) with GI Fittings excluding union (IS 1239 Mark) including trenching amp refilling earth etc

40mm dia nominal bore A Class

Mtr 338

32 10816

25mm dia nominal bore A Class

Mtr 182

48 8736

2

Making connection of GI distribution Branch with GI main including all Fitting

Beyond 25mm amp upto 100mm dia Each 332 8 2656

3

P amp F Sand ndashcast Floor Trap (Nahni) of (IS1729 mark) of approved qualitymake with socket down or hinged grating including cutting and making good the floor- 100 x 100mm Each

421

4 1684

4

P amp F Gun-metal Full-way Valve (IS778 Mark) or wheel valve of approved make

Gun metal 25mm nominal bore Each 702 4 2808

Gun metal 40mm nominal bore Each 1065 4 4260

5

P amp F PVC Storage Tank ISI Marked (IS 12701) indicating the BIS license No) of approved make with cover 25mm dia 1M long GI over-flow pipe amp 25 Cm long wash out pipe with plug amp socket including making connection etc complete of approved design

1000 litres capacity Each 5437 4 21748

6

P amp F push cock superior quality of approved make

CP brass 15 mm

Each 416

16 6656

TOTAL 5936400

26

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - C-HOTICULTURE WORKS

SL No Specification Unit Rate QTY Amount

1

Supply of dry manure including loading unloading transportation amp stacking at site

Goat dungmanure

Cum

50000

35

17500

2

Supply amp Stacking good earth at site complete including loading unloading amp transportation etc Cum

7500

55

4125

3

Supply of different varities of treeshrubsclimbers according to height and age of the plant at site including loadingunloading amp transportation etc complete

Different flowing plants 900mm to 1500mm Each

1500

115

1725

4

Supply of different varities of bougainvillea in poly bagsearthen pots according to height growth amp age of plant at site including loadingunloading amp transportation etc complete

Local variety of bougainvillea 600 mm to 900mm Each

1500

75

1125

5

Digging pits in ordinary soil amp refilling the same with the excavated earth mixed with manure in the ratio 21 by volume (2 parts of stacked volume of earth after reduction by 20 1 parts of stacked volume of manure after reduction by 8) flooding with water and dressing including removal of surplus earth Each

1000

150

1500

27

(Cost of manure or extra good earth if needed to be paid separately) pit dia 60 cm X 60 cm deep

6

Spreading of manure and good earth in required thickness (cost of manure and good earth to be paid separately) Cum

400

75

300

TOTAL OF HORTICULTURE WORKS

26275

28

SCHEDULE OF QUANTITIES

Name of work Pushkar Market Street- Restoration And Development Works

(Based on item rates)

PART - D- NON SOR WORKS

SL No

Specification Unit Rate to

be Quoted

QTY

Amount

1

Providing and fixing fine dressed sand stoneapproved stone JALIas per existing matching geometrical design including moulding work with fine finishing fixing with thambli by proper adhesive and white cement with pigment including making groove etc complete in all respect

(b) 50mm thick Sqm 45

2

Providing amp fixing ashlar Rain water Spouts (3) lines dressed as per traditional practice existing design approved design size 60 x 30 x 25 cm fixing the rain water spout with lime surkhi mortar 12 with proper slope complete in all respect Each

12

3

Providing amp fixing ornamental stone cladding of approved sand stone with dressing complete as per existing designpatternapproved designfixing with 30mm thickgrinded lime surkhi mortar 12 amp pointing with white cement with araldite and pigment to match shade the stone complete in all respect as per direction of Engineer incharge(75mm thick) Sqm

54

4

Providing and fixing fine dressed sand stone Dasacoping as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect

(c) 75mm to 100mm thick with pan patti design Sqm 320

5

Providing and fixing fine dressed sand stone Cladding (Plain dressing only) as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect including removal of damaged cladding

(a) 50mm to 60mm thick Sqm 180

6

Supply and istallation whiteredapproved shade sandstone dustbin of size 800 mm x 450 mm and height 850 mm with hollow center to hang MS Dustbin of size 400mmx 500mmx 600 mm made of 1mm thick metal sheet fixed to stone pillars with MS chain edged with 50x50x5 mm angle sections including cutting welding and fabrication with priming coat of red oxide and approved ready mix paint of approved shadeStone peices joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 26

29

7

Supply and istallation of RedWhiteapproved shade stone bench of size 1500mmx450mmx450 mm horizontal stone members of size 300mmx400mmx450mm on two sides supporting the horizontal seating stone of 150 mm thickness fixed to vertical stone members joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 35

8

Poviding fixing testing and commisioning of Stainless Steel body bull Storage Capacity in (litres) 150 bull Nominal Cooling Capacity (Litreshr) 150 bull No Of Faucets 2 bull Dimensions 820W x 700D x 1235 H bull Normal Demand (glasses hr) 750 bull Refrigerant R-22 bull Current (Amps) 749 bull Water Overflow (Connections) 12 BSP bull Type Of Compressor Rotary Model No- SDLX15150A make Blue star or similar in make of VoltasOasis

Each 4

9

Providing fixing testing and commissioning of water purification system having auto shut-off e-boiling Voltage Stabilizer bull Type of Treatment- sediment filter active carbon cartridge mineral guard UV chamber bull water flow rate 3ltrminbull ultra- violet lamp of 16 watts bull power rating of 35watt bull Dimensions 355H x 1025D x 307WModel ndash Hi fio Make Eureka Forbes- aquagard or similar in make of livpurekent

Each 4

10

Demolishion of the existing bituminous road surface to a depth of 150 mm and disposal of demolished material with a lift upto 3 m and lead upto 1000 m

Sqm 50

11

Providing and fixing fine dressed sand stone flooring with white sand stone (Bansh paharpurdholpur stone) (panji marked surface) machine cut of approved shade set in pattern over 30mm thick base in cement mortar 16 including pointing with cement mortar 12 (1 cement2 stone dust) mixed with pigment to match the shade of stone with joint thickness upto 5 mm as per existing flloringsample approved by the consultantapproved by (75mm thick)

Sqm 730

12

Providing and Fixing Cobbles stone of lime sand stone size 100X100MM and theakness of 70 to100mm on path way open court yards of color shade approved by the consultant over cement mortar 13 ( 1 cement3 course sand) keeping 10mm joint between cobbles filled with cement mortar 13 ( 1 cement3 course sand) the mortar should remain recessed by 5mm from the top surface of the cobble stone complete in all respects as per design and details provided by the consultant

Sqm 1650

13

Supply and installation of sanstone signage 450x200 mm of redwhiteapproved shade Sandstone 75 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete with fixing with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 6

30

14

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 450mmx2400mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved with ornamentation in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

15

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 650mmx1200mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

16

Heritage signage shall be etched on to Dulmera stone plaque of size 18m x 14m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 4

17

Signage shall be etched on to Dulmera stone plaque of size 18m x 10m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 12

18

Providing and fixing MS steel sheets 3 mm thickness on to MS anfgles flats tees and hollow sections with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Kg 10640

19

Providing and fixing MS perforated sheets 3 mm thickness with diamondround shaped perforations as per sample approved by the consultant with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Sqm 90

20

Painting of shop signages with lettering in hindienglish and ornamental design patterns in ready mix paint of approved brand and manfacture in all shades to give an even shade as per drawings and details provided by the consultant

Sqm 560

21

Flush pointing over joints of dressed stone cladding chajjas jali etc with neat cement sand amp colour including racking the joints as per Jodhpur practice including all leads and lifts with grinded mortar of lime putty and stone powder mixed in 11 ratio and gur methi gugal etc are to be mixed as per old traditional practice

Sqm 75

22

Khamira Colour Washing as per old traditional practice to prepare the Khamira the lime should be slaked at least for 7-10 days and regularly it should be stirred by adding cured Gugal for non-synthetic colour adding gum (babool gum) as per specificationThen applying prepared solution on walls three to four thin coats as desired finishing

Sqm 1750

31

23

Providing amp applying Lime kara 12 (1lime cream 2 Zikki powder) grinding mortar with grinding millmanually on lime baseon all flat surface in two coatsFirst coat applying 3mm to 4mm thick and curing properly at least 7 dayssecond finishing coat done after 7days of previous coat as per traditional practice(thickness not more than 6 mm)

Sqm 155

TOTAL OF NON SOR WORKS

3

RAJASTHAN TOURISM DEVELOPMENT CORRPORATION

HOTEL SWAGATAM CAMPUS NEAR RAILWAY STATION JAIPUR PHONE NO 51157802202586 FAX 0141-22010452204065

E-TENDER NOTICE NO 082016-17 Rajasthan Tourism Development Corporation Limited ( RTDC) Jaipur invites sealed competitive bids for the Various Development refurbishment restoration amp construction Works at Ajmer-Pushkar (PRASAD YOJNA) amp Sambhar Town Jaipur ( Swadesh Darshan Yojna) from the contractors registered with State Government Government of India and undertaking of statecentral Government in appropriates class amp trade The detailed information can be seen at website wwwrtdctourismrajasthangovin amp sppprajasthangovin The tender documents can be downloaded to httpeprocrajasthangovin from dated 2682016 to 2692016 for Prasad Yojna and from dt 2682016 to 2992016 for Swadesh Darshan Yojna upto 200 PM The undersigned reserves the full rights to reject all or part thereof the tender

(Madhav Sharma) GENERAL MANAGER-WORKS

RTDC LTD JAIPUR No Date Copy to following for information amp na-

1 PS to Director Tourism Govt of Rajasthan Jaipur

2 PS to Managing Director RTDC Ltd Jaipur

3 EO to Executive Director (Finance) RTDC Ltd Jaipur

4 PA to Executive Director RTDC Ltd Jaipur

5 Divisional Engineer RTDC Ltd Jaipur

6 Assistant Accounts Officer Works Division RTDC Ltd Jaipur

7 Cashier WD RTDC Ltd Jaipur

8 Manager RTDC Ltd Publicity Section Jaipur for publication as per Rajasthan Transparency in Public

Procurement Act -2013 for serial No(A) 17913 and (B)2356 in One leading regional daily news

paper One state level leading daily news paper and one All India level daily news paper and for rest

serial no ei(A)234568101112ans (B) 1478 in one leading regional daily news paper and One

state level daily news paper

(Madhav Sharma) GENERAL MANAGER-WORKS

RTDC LTD JAIPUR

4

RAJASTHAN TOURISM DEVELOPMENT CORRPORATION

HOTEL SWAGATAM CAMPUS NEAR RAILWAY STATION JAIPUR PHONE NO 51157802202586 FAX 0141-22010452204065

GENERAL TERMS amp CONDITIONS

SN

1 Tenders invited from Contractor having registration in Government Semi-Government or any other Public Sector Undertakings

2 The work shall include all lead and lifts at site of work

3 The work shall be strictly carried out as per the tender specification amp Indian Standard specifications

4 Any kind of damage to the existing structure during the execution of the work shall be made good by the contractor at no extra cost

5 Electricity and water for execution of the work shall be arranged by the contractor at his own cost

6 The contractor shall be fully responsible for compliance of Labour laws EPFESI amp contribution towards labour as well as himself and insurance etc for the workers engaged by him on the works

7 Conditional tender shall not be considered and shall be liable to be rejected without taking any cognizance thereof

8 Quantities of any item may be increased decreased or deleted as per site conditions and as per instruction of Engineer-in-charge Nothing can be claimed extra for such changes in the item and also in the variation of quantities

9 All the instructionsspecifications issued by RTDC authorities from time to time regarding construction addition or alteration shall be binding upon the contractor

10 The contractor shall take all the necessary measures and will be responsible for the safety for the Labour at work and existing structure etc

11 Skilled man power shall be provided at site to engineer-in-charge for checking of lines levels and specifications etc who shall be at the disposal of the engineer-in-charge If not provided by the contractor than same shall be engaged by the Corporation on Contractorrsquos cost and the payment made shall be recovered from the contractor

12 Contractor is to abide by the instruction issued by the Engineer-in-charge amp Client Department Authority regarding collectionstorage of material at site

13 All service lines ie water supply sewer telephone Electricity etc at the site shall have to be taken care of by the contractor during the execution Any damage to these lines shall have to repaired by the contractor

14 All finishing material shall be got approved by the Clientcompetent authority before execution

15 All hidden works shall be got checked necessarily from the engineer-in-charge before covering them for which the contractor shall inform the engineer-in-charge well in time

16 Final payment shall be made only after satisfactory handing over of the said work to the clientdepartment All materials shall be got tested before use by the contractor at his own cost as directed by Engineer-in-charge

17 Defect liability shall be 1 year for the said work

18 The Tenderers are advised to visit the site before quoting the rates and to seek any clarification regarding said work they can contact the engineer-in-charge during office hours

19 The rates quoted by the contractor shall be deemed to be inclusive of Sales tax Income Tax Service tax Royalty Labour cess amp any other taxdutycess applicable by law at the time of payment and shall be borne by the contractor for performance of the contractor The employer shall deduct such taxes as per applicable law

20 The Photographsrsquo of site before starting of the work and after completion of work will be provided in two copies by the contractor at his own cost amp no extra cost will be paid by department

21 The rates quoted by the contractor will remain valid upto four months Validity period on the written consent of the contractor can be extended

Signature of Contractor with seal and full address with mobile No

General Manager-Works RTDC Ltd Jaipur

5

RAJASTHAN TOURISM DEVELOPMENT CORPORATION LIMITED JAIPUR

(WORKS DIVISION)

TENDER DOCUMENT (Technical Bid)

E-Tender (NIT No) 082016-17

Name of work- Pushkar Market Street- Restoration And Development Works

Mirror

Signature of Contractor

6

UNDERTAKING

THE GENERAL MANAGER ndashWORKS RTDCLTD JAIPUR

Dear Sir

Having examined and understood terms amp conditions the plans specifications and Schedule of

Quantities for the work prepared by your Architects Engineers IWe hereby offer to execute the work at the

rates which IWe have quoted for respective items specified IWe herewith enclose myOur DD no------------

----------dated---------------Name of bank-----------------------------------------------------------for Rs

as earnest money for execution at myour tendered rates

In the event of this Tender being accepted IWe agree to enter into agreement as amp when required

to execute the work

Yours Faithfully

CONTRACTOR (Name amp Full address with seal)

7

MEMORANDUM IWe hereby tender for execution for the work within time specified and rates entered in the schedule G in all respects in accordance with the specifications designs drawings and instructions in writing referred to herein and in the annexed conditions with such materials as are provided for by and in all other respects in accordance with such conditions so far as applicable IWe have visited the site of work amp IWe amare fully aware of all the difficulties amp conditions likely to effect carrying out of the work IWe have fully acquainted myselfourselves about the conditions in regard to accessibility of site and quarrieskilns nature and the extent of ground working conditions including stacking of material installation of TampP conditions affecting accommodation and movement of labour etc required for the satisfactory execution of this contract (a) Name of work (b) Estimated Cost (in figures) Rs

(in words) Rs

(c) Earnest Money Rs (d) Security Deposit (Including Earnest Money) Rs NOTE (1) Security deposit to be 10 in the form of cash or deduction to be made from running bills (2) Time allowed for the work to be reckoned from the 10

th day after the date of written order to

commence the work Should this tender be accepted in whole or in part IWe hereby agree to abide-by and fulfill all terms and provisions of the conditions of contract annexed hereto and in the NIT or in default thereof to forfeit and pay to the General Manager (Works) Jaipur the sum of money mentioned in the said conditions A sum of Rs is enclosed herewith as earnest money This amount of earnest money shall absolutely be forfeited to Department without prejudice to any other right or remedies should IWe fail to commence the work specified in the above memorandum or should IWe not furnish performance guarantee in cash or in form or Bank guarantee at the time of execution of agreement specified in the above memorandum in accordance with the said conditions of contract

Signature of Contractor The above tender is hereby accepted by me

General Manager-Works

RTDCLTD JAIPUR

8

DIRECTIONS FOR GUIDANCE OF CONTRACTORS

1 All works proposed for execution by contract will be notified in a form of invitation to tender pasted on a board hung up in the

office and signed by General Manager-Works RTDC LTD Jaipur or duly authorized officer

The form of invitation to tender will state the work to be carried out as well as the date of submitting and opening of tenders

amp the time allowed for carrying out the work also the amount of earnest money to be deposited with the tender and the

amount of security deposit to be deposited by the successful tenderer and the percentage as per PWFampAR Govt of

Rajasthan to be deducted from the bills copies of the specifications designs and drawing and estimated ratesscheduled

rates and any other documents required in connection with the work for the purpose of identification by the Rajasthan

Tourism Development Corpn Jaipur Drawings shall also be open for inspection by the contractor at the office of the General

Manager9 Works) Rajasthan Tourism Development Corporation Ltd Jaipur or duly authorized Engineer during office hours

2 In the event of the tender being submitted by a firm it must be signed separately by each partner thereof or in the event of

the absence of any partner it must be signed on his behalf by a person holding power of attorney authorizing him to do so

3 Receipt for payment made on account of a work when executed by a firm must also be signed by the several partners

except where the contractor are described in their tender as a firm in which case the receipt must be signed in the name of

the firm by one of the partners or by some other person having to give effectual receipts for the firm

4 Any person who submits tender shall fill up the usual printed form stating at how much percent above or below the rates

specified or on item rates he is willing to undertake the work Tenders which propose any alteration in the work specified in

the said form of invitation to tender or in the time allowed for carrying out the work or which contain any other conditions of

any sort will be liable to rejection No single tender shall include more than one work but person who wish to tender for two

or more works shall submit a separate tender for each work Tender shall have the name and number of the work to which

they refer written outside the envelope

5 The General Manager-Works RTDC Ltd Jaipur or other duly authorized Engineer will open the tenders in the presence of

any intending contractors or their authorized representative who may be present at the time and will enter the amounts of the

several tenders in the Register of tenders in the event of the tender being accepted A receipt for the earnest money

forwarded therein shall there upon be given to the contractor who shall there-upon for the purpose of identification sign

copies of the specifications and other documents In the event of a tender being rejected the earnest money forwarded with

such unaccepted tender shall be returned to the contractor

6 The General Manager-Works RTDC Ltd Jaipur or other authorized Engineer shall have the right of rejecting all or any of

the tenders without assigning any reasons

7 The accompanying schedules of quantities in ldquoGrdquo Schedule are the architects estimated quantities for the work The

contractors shall attach histheir OWN prices for the each item in column for rates left blank and shall money out the same in

the final column amp totals HeThey shall fill up properly the form of tender and the schedule of quantities without adding any

stipulations thereto The tender shall show the total amount arrived at in the manner above described The tender Notice to

Contractors conditions of contract Specifications and the Schedule of quantities and rates etc shall all be embodied in and

shall form a part of the contract

8 The quantities contained in the Schedule are only approximately correct If more or less quantities are actually done on the

work the contractors shall be paid for the same at the rates tendered by himthem in the Schedule of Rates The work as

actually done will be measured by the contractors qualified engineer and bill furnished to the General Manager(Works)

RTDC Ltd Jaipur which in turn will get it checked by the Engineer in charge time to time and will be paid for as provided in

the Special Condition of Contract after deducting SD as per PWFampAR provisions

Signature of Contractor

9

GENERAL CONDITIONS OF CONTRACT 1 All the materials used shall be of approved quality and to the entire satisfaction of the General Manager-works RTDC Ltd

Jaipur

2 The General Manager-works RTDC Ltd Jaipur or the Engineer in charge reserves right for any additions and alternations or

omission in the tender and execution of works In case the Department supplies the material specified in the tender recovery for

the cost of supplied material from subsequent running Bill will be made

3 The Department shall pay to the contractor as detailed in special conditions of contract

4 The contractors isare to set out the work in accordance with the plans All lines to be accurately marked or otherwise to the

satisfaction of the Engineer in charge

5 The contractors shall meet the Engineer in charge or his representative at the works site whenever required

6 The contractors shall maintain and be represented on site at all times by a responsible and efficient EngineerArchitect who

thoroughly understands all the trades enrolled The Engineer in charge reserves the right to dismiss the Foremen and any

workmen who in his opinions are not sufficiently skilled or who neglect or refuse to obey instructions

7 The contractors shall be given one set of the plans free of charge

8 The General Manager-works RTDC Ltd Jaipur reserves the right of altering the drawings and nature of the work and adding

to or omitting any item of work or having portions of the same carried out departmentally or otherwise and such alterations or

variations shall be carried out without prejudice to the contract

9 The General Manager-works RTDC Ltd Jaipur reserves to the right to increase or decrease quantity of work or omit some part

of the work without violating the contract and for which he will not be held liable to compensation to the contractors

10 All plants machines and other equipments are to be arranged by contractor for the work

11 Any percentage rate tender containing item-wise rates and any item rate tender containing percentage rate below or above

estimatedscheduled rates will be summarily rejected

12 The Conditions of Contract shall govern sales tax or any other tax on materials or Income Tax in respect of the contract

Deduction of Income Tax at source will be made as per provisions of the Income Tax Act in force from time to time

13 If on check there are differences between the rate quoted by the Contractor in words and figures or in the amount worked out

by him the following procedure shall be followed -

(i) Where there is a difference between the rates in figures and words lower of the two rates shall be taken as valid and correct

rate

(ii) When the rate quoted by the contractor in figures and in words tallies but the amount is not worked out correctly the rate

quoted by the contractor shall be taken as correct and not the amount worked out

(iii) While quoting rates if raterates against any item or items are found to be omitted the rate given in the Schedule G by the

Department for such items will be taken into account while preparing comparative statement and contractor shall be bound to

execute such item on G Schedule rates

(iv) In case where percentage is given but the above or below not scored the tender will be non-responsive

14 The Contractor shall read the specifications and study the working drawings carefully before submitting the tender

15 After acceptance of the tender the Contractor or all partners (in the case of partnership firm) will append photographs and

signatures duly attested at the time of execution of agreement

16 Experience into similar nature of works for which tender invited and fulfill conditions of NIT

17 Contractors shall submit only unconditional tenders Conditional tenders are liable to be rejected similarly

Signature of Contractor

General Manager-Works

10

SPECIAL CONDITIONS OF CONTRACT

1 The Technical bid will be opened first on the day mentioned in the NIT Bidders will be evaluated as per norms set for

qualification in Technical bid and Financial bids of only those bidders will be opened which were qualify in the technical bid

2 Contractors bidding for the work should be reputed experienced contractors fulfilling the requirements laid down in the NIT

and well versed and working in the field Only those bidders will be considered qualified in the Technical bid who have

executed similar works to the tune of at least 13rd of the estimated value of the work (published in NIT) during last five

years (updated to current price level 100 per annum) and have the necessary technical expertise and support

machinery and administrative and financial capability to satisfactorily execute works in question for which they are bidding

3 The decision of the General Manager-works RTDC Ltd Jaipur or his representative on pre-qualification in the Technical bid

will be final amp binding

4 All raw materials will have to be brought to the site and all carving work will have to be executed only at site to qualify for

payment of running bills No payment of any material at or work done at place other than the site of work will be made

unless such material is brought to site and found acceptable to be used on the work

5 General conditions of contract special conditions of contract and specification of work as appended herewith in addition to

General condition of agreement will be applicable on this work In addition the PWD specifications will also be applicable

as relevant to the particular item of work

6 Work shall be carried out as per approved drawings and designs to be provided by the departmental architect engaged

7 Architectural work for the construction shall be of a high standard quality and pattern (class and style) to match the existing

work

8 All work shall be carried out as per approved samples of each element

9 The exposed surface of stonework will be suitably protected from damage disfigurement during the course of work and will

be cleaned and washed removing all spots etc for final acceptance on completion

10 All scaffolding shuttering TampP etc for the work shall have to be arranged by contractor at his own cost

11 The time for completion of work as given in the NIT shall be strictly adhered to and the work so planned as to be completed

within the scheduled period The contractor shall provide with a time schedule to the department for progressing with and

completing various stages of the work

12 Only best quality stone and other building materials shall be used in construction and all such material will be got approved

from the Engineer in-charge before use

13 Quantities of individual items can be increased invariably or even reduced withdrawn and specification and designs altered

at the discretion of Engineer in-charge and contractor will not be entitled to any compensation thereof for such alteration For

extra items if any rates will be decided based on market analysis to be provided by contractor

14 Contractor will give notice before any work is covered up Bad work will have to be redonereplaced at contractors cost

15 Full scale drawings form work for architectural stone work to be developed from drawings wherever necessary shall be got

prepared by contractor for prior approval before Signature of contractor

construction at his own cost and he will get these approved from the Engineer in-charge General Manager-Works RTDC

Ltd Jaipur who shall however be at liberty to modify such drawings form work and no extra payment shall be made for this

16 It will be the contractors responsibility to get the drawings formwork and sample of individual itemselements of work

approved from the departmental Architect Engineer before proceeding with manufacture of the same at site

17 The contractor shall provide adequate safety measures and proper insurance for his labour working at site and it shall be

done by contractor at his end Contractor shall settle all labour disputes at his own level The contractor shall observe all

labourfactory laws in force

18 Security deposit will be recovered from each running bill of contractor as per provisions of PWFampAR Earnest money will be

adjusted in the security deposit amount Security deposit shall be returned after one year satisfactory completion of the work

and on satisfactory performance of structure

19 No escalation will be payable even if the completion period exceeds that as stipulated

20 In case of unsatisfactory work by contractor or deliberate delaying the work without valid reasons the contract will be liable

to be terminated at the stage up to which acceptable work is done and paid for with no compensation of any sort payable to

contractor for withdrawal at that stage and possession of work executed at site will be taken over by Department In case of

any dispute the decision of the Department will be final and binding on the contractor

21 The bidder has to furnish with his technical bid (In prescribed Performarsquos Schedule 1-5)

Full information regarding financial resources and capability in Schedule-1 herewith(Photocopy to be made out of schedule)

a) Details of works of similar type and magnitude completed in last 5 years by the tenderer in Schedule II (Photocopy to be

made out of schedule)

b) Details of works bids and works to be completed in Schedule-III (Photocopy to be made out of schedule)

c) Details of technical supervisory personnel and master craftsman craftsman which he proposes to utilize for this work in

Schedule IV (Photocopy to be made out of schedule)

d) Details of plant and equipment proposed for use in the work in Schedule V (Photocopy to be made out of schedule)

11

e) The bidder should demonstrate that they have adequate financial resources (Over draft Credit Limit letter from bank)

Signature of Contractor

22 Bid capacity

(i) Bidders who meet the minimum qualifying criteria are to be evaluated further for Bid capacity as under -

(a) Maximum value of similar works executed in any one year during the last five years including current year (updated to the

current price level) extracted from schedule II which will take into account the completed and on going works

(b) Value of the existing commitments works (complete or partial) to be completed in the coming 12 months (up dated to the

current price level) Extracted from schedule III

(ii) Bid Capacity=(AxNx3-B) where

A=Maximum value of works executed in any one year during the last five years (updated to present price level) taking into

account the completed as well as works in progress

N=Number of years prescribed for completion of the works for which bids are invited herein (in years)

B=Value at present price level of existing commitments and on going works (at hand) to be executed during N period

The bidder will be post qualified only if his bid capacity is equal or more than the cost of work in question No contract may be

awarded to bidder lacking the financial and technical resources to undertake the work The decision of General Manager

(Works) Rajasthan Tourism Development Corporation Ltd Jaipur in this regard will be final and binding

NOTE -The present price level for turn over cost of completed works and amount of similar nature works (of a value at least 13rd of the estimated value of the work published in NIT during last five years) the previous years value shall be given weightage of 10 per year as following for the tendersbids invited by this department ndash

(a) For last year - 100 (b) For one year before - 110 (c) For two year before - 121 (d) For three year before - 133 (e) For four year before - 146

For current year the price level shall be 10

23 The right to qualify or not to qualify any or all the bidders without assigning any reason is reserved with the General Manager

(Works) Rajasthan Tourism Development Corporation Ltd Jaipur

24 Determination of Responsiveness

a) Prior to the detailed evaluation of bids the General Manager (Works) Rajasthan Tourism Development Corporation Ltd

JAIPUR will determine whether each bid is substantially responsive to the requirements of the bidding documents

b) For the purpose of this clause a substantially responsive bid is one which has required capacity capability and financial

resources and whose bid conforms to all the terms conditions and specifications of the bidding documents without

material deviation or reservation A material deviation or reservation is one which affects in any substantial way the

scope quality or performance of the works or which limits in any substantial way the General Manager (Works)

Rajasthan Tourism Development Corporation Ltd JAIPURrsquoS right or the Bidders obligations under the contract and the

rectification of which deviation or reservation would effect unfairly the competitive position of other bidders presenting

substantially responsive bids

c) if a bid is not substantially responsive to the requirements of the bidding documents it will be rejected and may not

subsequently be made responsive by the bidder having corrected or withdrawn the nonconforming deviation or

reservation

25 Construction programme ndash

1) Within the time stated in this contract the Contractor shall after the acceptance of his tender submit to the General Manager

(Works) Rajasthan Tourism Development Corporation Ltd JAIPUR for approval programme together with bar chart PERT

chart

2) proposed deployment of machinery etc showing the order of procedure in which he proposes to carryout the works The

contractor shall provide in writing general description the arrangements deployment of equipment work planning and

methods which he proposes to adopt for the execution of the works

3) If at any time it should appear to the Department that actual progress of the work does not conform to the approved

programme referred to in sub-clause (1) of this clause the Contractor shall produce at the request of the Department a

revised programme showing the modifications to the approved programme necessary to ensure completion of the works

within the time for completion

4) The submission to and approval by the Department of such programmers or the furnishing of such particulars shall not

relieve the contractor of any of his duties or responsibilities under the contract

5) The contractor shall submit within 30 days after the date of notice to proceed with the work a detailed construction

programme to suit the programme of completion for the entire contract period This programme shall be reviewed and

revised every half year at the beginning of the working season to plan timely action for making up the slippages occurred in

the previous season to suit the stipulated period of completion (including mile stones) as extended from time to time

26 Materials workmanship period and certificates of Maintenance and Defect Liability etc

All materials and workmanship shall be of the respective kinds described in the contract and in accordance with the

ArchitectsEngineer instructions and shall be subjected from time to time to such tests as the Engineer may direct at the

place of manufacture or fabrication or on the site or at such other place or places as may be specified in the Contract or at

all or any of such places The contractor shall install quality control laboratory and provide such assistance instruments

machines labour and materials as are normally required for examining measuring and test in any work and the quality

weight or quantity of any material used and shall supply samples of materials before incorporation in the works for testing as

may be selected and required by the Engineer-in-charge

12

Signature of Contractor

27 Period of maintenance and Defects liability

The Contractor shall be responsible to make good within such period as maybe stipulated by the Engineer in-charge any

defect which may develop or may be noticed during period of maintenance of 12 months from the certified date of

completion and which is attributable to the contractor All notice of such defect shall be given to the Contractor promptly In

case the contractor fails to make good the defects the Engineer in-charge may employ other persons to make good such

defects and all expenses consequent thereof and incidental thereto shall be recoverable from the Contractor In the event

the employer takes over portions of work as they are completed the liability of the contractor under this clause for these

portions shall extend to a period of 24 months from the actual dates on which portions of the works are taken over

28 The successful biddercontractor is required to undertake detailed photo recording documentation by still photography

videography of the entire work prior to commencement and the same has to be deposited with the Engineer in charge of

RAJASTHAN TOURISM DEVELOPMENT CORPORATION JAIPUR in two copies immediately Before dismantling any old

work to redo this still photography with specifically putting some identity mark number of the portion by any specified means

has to be done and this to be got checked and certified by Engineer In charge and recorded specifically in the measurement

book (MB) A written permission from the Engineer in charge before commencement of executing such work is essential for

execution as well as for payments

During the work in progress and after its completion also photo documentation is necessary and the photos before amp after

completion of portion of work are essentially to be enclosed with the bill for payment

Signature of Contractor

GENERAL MANAGER (WORKS)

13

SCHEDULE-I

FINANCIAL RESOURCES AND CAPABILITY

(PURSUANT TO CLAUSE 26) 1 Name of Applicant

2 Name of Partner Director

3 Capital

(a) Authorised

(b) ii

4 (a) WhetheCategory of Enlisted in Govt

(b) Details Details of the work completed and applicants performance record for last five years

(information to be furnished in Schedule II in India

(c) Details of works in hand applicants performance record for last five years (Information to be

furnished in Schedule-III)

5 Furnish Balance Sheet and profit and loss statement with auditorrsquos report for the last three years

6 The information on the following aspects should be specifically furnished

(i) Working capital and net worth

(ii) Turnover for the years

a

b

c

(iii) Gross income in years in India

(i)

(ii)

(iii)

(iv) Quick ratio or acid test ration (Quick assets to current liabilities)

7 What is the maximum annual turnover of the project that you can handle (Financial Projection)

8 Have you ever been denied tendering facilities by any Governmental DepartmentPublic Sector

undertaking

(If yes Please give details)

9 List of your source of finance

10 Certificate of financial soundness by Bank

11 Name and address of Bank from whom reference can be obtained

12 Have you ever been declared bankrupt

(if yes please give details)

Signature of Contractor

14

SCHEDULE-II WORKS OF SIMILAR MAGNITUDE TO THE WORK UNDER CONSIDERATION COMPLETED BY THE

APPLICANT IN LAST FIVE YEARS IN INDIA

(Pursuant to Clause 26)

SNo Na

me

of

wor

k

Place

amp

State

Tender

awardi

ng

Agency

Tender

ed Cost

Stipulate

d time of

Completi

on

Time in

which

complete

d

Date

of

comp

letion

Reason

for

Delay

Principal

features

of work

done

Value of

work done

1 2 3 4 5 6 7 8 9 10 11

Year

Year

Year

Signature of Contractor

15

SCHEDULE-III WORKS TENDERED FOR amp WORKS TO BE COMPLETED AS ON THE DATE OF SUBMISSION OF

APPLICATION IN INDIA

(pursuant Clause 26)

SNo Name

of

work

Place

amp

State

Work on Hand Work tendered for

Tender

Cost amp

Date

or

award

Stipulated

period of

Completion

Cost of

work

remaining

to be

executed

Antici

pated

Date

of

compl

eted

Estimate

d cost

(Rs In

Lakh)

Date

when

decisio

n

expecte

d

Stipulate

d Date

period of

Completi

on

Remar

ks

1 2 3 4 5 6 7 8 9 10 11

Year

Year

Year

Signature of Contractor

16

SCHEDULE- IV

Details of Key Personnel intended to be employed for this work

(use separate sheet if necessary)

(Pursuant to clause 26)

S No Name of Person Qualification Designation Experience Work to be

put on

A Technical Personnel

(1)

(2)

(3)

(4)

B Administrative Personnel

(1)

(2)

(3)

(4)

C Master Craftsmen

(1)

(2)

(3)

(4)

D Craftsmen

(1)

(2)

(3)

(4)

E Any other (1)

(2)

(3)

(4)

Signature of Contractor

17

SCHEDULE- V

DETAILS OF MAJOR ITEMS OF CONSTRUCTION PLANT AVAILABLE FOR THIS WORK

S No

Particulars Make Year of manufacture

Nos Whether owned or confirmed lease

1 Lime mortar Mill

2 Scaffolding Material

3 Movable Gantry

Crane etc

4 Any other TampP for

the purpose

5

6

7

8

Signature of Contractor

18

RAJASTHAN TOURISM DEVELOPMENT CORPORATION LIMITED JAIPUR

(WORKS DIVISION)

TENDER DOCUMENT (Financial Bid)

E-Tender (NIT No) 082016-17

Name of work- Pushkar Market Street- Restoration And Development Works

Restoration Conservation work Stained GssMirror

Signature of Contractor

19

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works

(Based on PWD BSR CIVILElectrical Ajmer Circle - 2013 and item rates)

SCHEDULE -G

GENERAL ABSTRACT

SNO WORK AMOUNT

1

PART A- CIVIL WORKS BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

304610000

2

PART B- SANITARY WORKS BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

5936400

3

PART C- HORTICULTURE BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

2627500

4

PART D-NON BSR ITEMS ( CIVIL AND ELECTRICAL)

GRAND TOTAL

I we hereby agree to execute the work PART A In figures Above Below In words

Above below PART B In figures Above Below In words

Above below PART C In figures Above Below In words

Above below PART D In figures Above Below In words

Above below

General Manager Works

RTDC Ltd Jaipur

Signature of the Contractor With Full Postal Address

20

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works

(Based on PWD BSR Civil Ajmer Circle - 2013)

PART A- CIVIL WORKS

SL No Specification Unit Rate QTY Amount

1

Surface Dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr and lift up to 15 Mtr All kinds of soil 100Sqm 437

26

11362

2

Surface Dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr and lift up to 15 Mtr All kinds of soil Cum 127

30

3810

3

Filling available excavated earth (excluding rock) in trenches plinth side of foundation etc in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift Cum 61

12 732

4

Providing and laying in position cement concrete including curing compaction etc complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level

M15 grade Nominal Mix (with graded stone aggregate 20mm nominal size) Cum

3438

230

790740

5

Random Rubble stone masonry for foundation and plinth in Cement Sand mortar above 30 CM thick wall in

21

Cement Mortar 13 ( 1-Cement 3-Sand) Cum

2193

35

76755

6

Random Rubble stone masonry for superstructure above plinth level one storey height above 30cm thick walls in

Cement Mortar 13 ( 1-Cement 3-Sand) Cum

2686

135

362610

7

Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor three level including curing compaction finishing with rendering in cement sand mortar 13 (1 cement 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement for -

Beams suspended floors roofs griders having slopes up to 15ordm landings balconies shelves chajjas lintels bands plain windows sills staircases and spiral staircases etc

M20 grade Nominal Mix

Cum 5138

45

231210

8

Centering amp shuttering with plywood or steel sheets including strutting propping bracing both ways with wooden members and removal of formwork for upto floor three level for

Suspended floors roofs landings staircases balconies girders cantilevers bands coping bed plates anchor blocks sills chhajjas lintel beam etc Sqm 222

60

13320

9

Providing and fabricating reinforcement using steel of SAILVIZAK-RINLTATA TISCONESSARZINDAL VIJAINAGAR IS 1786-1986 for RCC work including straightening cutting bending placing in position and binding (including cost of binding wire) all complete up to floor three level

22

Thermo-Mechanically Treated bars (Conforming of relevent IS code) Kg 78

2630

205140

10

Plaster on new surface on wall in cement sand mortar 13 including racking of joints etc complete fine finish

20mm thick Sqm 161

150

24150

11

6mm thick cement plaster to ceiling of mix 13 (1cement 3 fine sand) Sqm 105

25

2625

12

Polished Blue Kota Stone flooring skirting laid over 20mm thick base of CM 14 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete

13

For area of each slab from 2001 to 5000 SqCm

30mm thick slab

Sqm 988

35

34580

14

Wall Painting with plastic emulsion paint of approved brand and manufacture to give an even shade

Two or more coats on new work including preparation of base with primer putty lippy complete in all respect Sqm 82

76

6232

15

Applying Exterior Emulsion Paint like ACE APEX or equivalent brand and manufacture of required shade to give an even shade including all scaffolding on prepared surface (excluding water primer)

New Work (Two or more coats) Sqm 119

28

3332

16

Applying one coat of Asian Paints DECO Primer (Water thinnable) of approved brand amp manufacture ic scrapping by sand papering and preparing the even surface on wallwall putty as base for ACE APEX or APEX ULTIMA ic all scaffolding(New Surface) Sqm 24

104

2496

23

17

providing and fixing steel gategrating and grills made of anglesteessqure bars flats or blackpipe with holdfast and fitting complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide kg 83

1250

103750

Demolishing cement concrete including disposal of material with in 50 meter lead

136 or richer mix Cum 319

30

9570

148 or leaner mix Cum 311

20

6220

18

Demolishing RCC work manually by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge

Cum 1085

30

32550

19

Rough chisel dressed stone flooring over 20mm (Av) thick base in CM 16 including pointing with cement mortar 12 (1 cement 2 stone dust) with and admixture of pigment to match the shade of stone with joint thickness upto 15mm

45mm thick red sand stone

Sqm 385

230

88550

20

Providing and fixing 1st quality standard white grey ivory fume red brown light green light blue and other light shades glazed tiles confirming to IS 13753 amp IS 15622 of size 300mm x 200mm in walls floors steps pillars etc laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar)

Catogary-A Kajaria Johnson Somani Orient make Sqm 763

25

19075

24

21

Applying one coat industrial grade bitumen of penetration 2585 of approved quality using 170 kg per Sqm on Damp Proof Coarse after cleaning the surface with brushes and finally with a piece of cloth slightly soaked in kerosene oil Sqm 103

45

4635

22

Providing and Fixing 30 too 40 mm thickk stone chajjas in cement sand mortar 14 including making gola at junction with wall concrete M-15 grade (124 nominal mix drip course

20 mm thick plastering in CM 16 on both Sqm 645

35

22575

23

Providing and fixing steel gate grating and grills made of angles tees square bars flatsor black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide

Kg 83

9750

809250

24

Extra if squarerectangular hollow tubelar sections are used or grill made by flats only

Kg

10

6490

64251

P amp F bolts including nuts and bolts complete

Kg 57

240

13680

25

Painting with ready mix paint of approved brand and manufacture in all shades to give an even shade

New Steel Work Sqm 40

1500

60000

Welding by electric plant cmlength 286

15000

42900

TOTAL OF BSR WORKS CIVIL

3046100

25

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - B- SANITARY WORKS

SL No Specification Unit Rate QTY Amount

1

P amp F GI Pipes (External Work) with GI Fittings excluding union (IS 1239 Mark) including trenching amp refilling earth etc

40mm dia nominal bore A Class

Mtr 338

32 10816

25mm dia nominal bore A Class

Mtr 182

48 8736

2

Making connection of GI distribution Branch with GI main including all Fitting

Beyond 25mm amp upto 100mm dia Each 332 8 2656

3

P amp F Sand ndashcast Floor Trap (Nahni) of (IS1729 mark) of approved qualitymake with socket down or hinged grating including cutting and making good the floor- 100 x 100mm Each

421

4 1684

4

P amp F Gun-metal Full-way Valve (IS778 Mark) or wheel valve of approved make

Gun metal 25mm nominal bore Each 702 4 2808

Gun metal 40mm nominal bore Each 1065 4 4260

5

P amp F PVC Storage Tank ISI Marked (IS 12701) indicating the BIS license No) of approved make with cover 25mm dia 1M long GI over-flow pipe amp 25 Cm long wash out pipe with plug amp socket including making connection etc complete of approved design

1000 litres capacity Each 5437 4 21748

6

P amp F push cock superior quality of approved make

CP brass 15 mm

Each 416

16 6656

TOTAL 5936400

26

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - C-HOTICULTURE WORKS

SL No Specification Unit Rate QTY Amount

1

Supply of dry manure including loading unloading transportation amp stacking at site

Goat dungmanure

Cum

50000

35

17500

2

Supply amp Stacking good earth at site complete including loading unloading amp transportation etc Cum

7500

55

4125

3

Supply of different varities of treeshrubsclimbers according to height and age of the plant at site including loadingunloading amp transportation etc complete

Different flowing plants 900mm to 1500mm Each

1500

115

1725

4

Supply of different varities of bougainvillea in poly bagsearthen pots according to height growth amp age of plant at site including loadingunloading amp transportation etc complete

Local variety of bougainvillea 600 mm to 900mm Each

1500

75

1125

5

Digging pits in ordinary soil amp refilling the same with the excavated earth mixed with manure in the ratio 21 by volume (2 parts of stacked volume of earth after reduction by 20 1 parts of stacked volume of manure after reduction by 8) flooding with water and dressing including removal of surplus earth Each

1000

150

1500

27

(Cost of manure or extra good earth if needed to be paid separately) pit dia 60 cm X 60 cm deep

6

Spreading of manure and good earth in required thickness (cost of manure and good earth to be paid separately) Cum

400

75

300

TOTAL OF HORTICULTURE WORKS

26275

28

SCHEDULE OF QUANTITIES

Name of work Pushkar Market Street- Restoration And Development Works

(Based on item rates)

PART - D- NON SOR WORKS

SL No

Specification Unit Rate to

be Quoted

QTY

Amount

1

Providing and fixing fine dressed sand stoneapproved stone JALIas per existing matching geometrical design including moulding work with fine finishing fixing with thambli by proper adhesive and white cement with pigment including making groove etc complete in all respect

(b) 50mm thick Sqm 45

2

Providing amp fixing ashlar Rain water Spouts (3) lines dressed as per traditional practice existing design approved design size 60 x 30 x 25 cm fixing the rain water spout with lime surkhi mortar 12 with proper slope complete in all respect Each

12

3

Providing amp fixing ornamental stone cladding of approved sand stone with dressing complete as per existing designpatternapproved designfixing with 30mm thickgrinded lime surkhi mortar 12 amp pointing with white cement with araldite and pigment to match shade the stone complete in all respect as per direction of Engineer incharge(75mm thick) Sqm

54

4

Providing and fixing fine dressed sand stone Dasacoping as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect

(c) 75mm to 100mm thick with pan patti design Sqm 320

5

Providing and fixing fine dressed sand stone Cladding (Plain dressing only) as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect including removal of damaged cladding

(a) 50mm to 60mm thick Sqm 180

6

Supply and istallation whiteredapproved shade sandstone dustbin of size 800 mm x 450 mm and height 850 mm with hollow center to hang MS Dustbin of size 400mmx 500mmx 600 mm made of 1mm thick metal sheet fixed to stone pillars with MS chain edged with 50x50x5 mm angle sections including cutting welding and fabrication with priming coat of red oxide and approved ready mix paint of approved shadeStone peices joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 26

29

7

Supply and istallation of RedWhiteapproved shade stone bench of size 1500mmx450mmx450 mm horizontal stone members of size 300mmx400mmx450mm on two sides supporting the horizontal seating stone of 150 mm thickness fixed to vertical stone members joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 35

8

Poviding fixing testing and commisioning of Stainless Steel body bull Storage Capacity in (litres) 150 bull Nominal Cooling Capacity (Litreshr) 150 bull No Of Faucets 2 bull Dimensions 820W x 700D x 1235 H bull Normal Demand (glasses hr) 750 bull Refrigerant R-22 bull Current (Amps) 749 bull Water Overflow (Connections) 12 BSP bull Type Of Compressor Rotary Model No- SDLX15150A make Blue star or similar in make of VoltasOasis

Each 4

9

Providing fixing testing and commissioning of water purification system having auto shut-off e-boiling Voltage Stabilizer bull Type of Treatment- sediment filter active carbon cartridge mineral guard UV chamber bull water flow rate 3ltrminbull ultra- violet lamp of 16 watts bull power rating of 35watt bull Dimensions 355H x 1025D x 307WModel ndash Hi fio Make Eureka Forbes- aquagard or similar in make of livpurekent

Each 4

10

Demolishion of the existing bituminous road surface to a depth of 150 mm and disposal of demolished material with a lift upto 3 m and lead upto 1000 m

Sqm 50

11

Providing and fixing fine dressed sand stone flooring with white sand stone (Bansh paharpurdholpur stone) (panji marked surface) machine cut of approved shade set in pattern over 30mm thick base in cement mortar 16 including pointing with cement mortar 12 (1 cement2 stone dust) mixed with pigment to match the shade of stone with joint thickness upto 5 mm as per existing flloringsample approved by the consultantapproved by (75mm thick)

Sqm 730

12

Providing and Fixing Cobbles stone of lime sand stone size 100X100MM and theakness of 70 to100mm on path way open court yards of color shade approved by the consultant over cement mortar 13 ( 1 cement3 course sand) keeping 10mm joint between cobbles filled with cement mortar 13 ( 1 cement3 course sand) the mortar should remain recessed by 5mm from the top surface of the cobble stone complete in all respects as per design and details provided by the consultant

Sqm 1650

13

Supply and installation of sanstone signage 450x200 mm of redwhiteapproved shade Sandstone 75 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete with fixing with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 6

30

14

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 450mmx2400mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved with ornamentation in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

15

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 650mmx1200mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

16

Heritage signage shall be etched on to Dulmera stone plaque of size 18m x 14m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 4

17

Signage shall be etched on to Dulmera stone plaque of size 18m x 10m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 12

18

Providing and fixing MS steel sheets 3 mm thickness on to MS anfgles flats tees and hollow sections with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Kg 10640

19

Providing and fixing MS perforated sheets 3 mm thickness with diamondround shaped perforations as per sample approved by the consultant with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Sqm 90

20

Painting of shop signages with lettering in hindienglish and ornamental design patterns in ready mix paint of approved brand and manfacture in all shades to give an even shade as per drawings and details provided by the consultant

Sqm 560

21

Flush pointing over joints of dressed stone cladding chajjas jali etc with neat cement sand amp colour including racking the joints as per Jodhpur practice including all leads and lifts with grinded mortar of lime putty and stone powder mixed in 11 ratio and gur methi gugal etc are to be mixed as per old traditional practice

Sqm 75

22

Khamira Colour Washing as per old traditional practice to prepare the Khamira the lime should be slaked at least for 7-10 days and regularly it should be stirred by adding cured Gugal for non-synthetic colour adding gum (babool gum) as per specificationThen applying prepared solution on walls three to four thin coats as desired finishing

Sqm 1750

31

23

Providing amp applying Lime kara 12 (1lime cream 2 Zikki powder) grinding mortar with grinding millmanually on lime baseon all flat surface in two coatsFirst coat applying 3mm to 4mm thick and curing properly at least 7 dayssecond finishing coat done after 7days of previous coat as per traditional practice(thickness not more than 6 mm)

Sqm 155

TOTAL OF NON SOR WORKS

4

RAJASTHAN TOURISM DEVELOPMENT CORRPORATION

HOTEL SWAGATAM CAMPUS NEAR RAILWAY STATION JAIPUR PHONE NO 51157802202586 FAX 0141-22010452204065

GENERAL TERMS amp CONDITIONS

SN

1 Tenders invited from Contractor having registration in Government Semi-Government or any other Public Sector Undertakings

2 The work shall include all lead and lifts at site of work

3 The work shall be strictly carried out as per the tender specification amp Indian Standard specifications

4 Any kind of damage to the existing structure during the execution of the work shall be made good by the contractor at no extra cost

5 Electricity and water for execution of the work shall be arranged by the contractor at his own cost

6 The contractor shall be fully responsible for compliance of Labour laws EPFESI amp contribution towards labour as well as himself and insurance etc for the workers engaged by him on the works

7 Conditional tender shall not be considered and shall be liable to be rejected without taking any cognizance thereof

8 Quantities of any item may be increased decreased or deleted as per site conditions and as per instruction of Engineer-in-charge Nothing can be claimed extra for such changes in the item and also in the variation of quantities

9 All the instructionsspecifications issued by RTDC authorities from time to time regarding construction addition or alteration shall be binding upon the contractor

10 The contractor shall take all the necessary measures and will be responsible for the safety for the Labour at work and existing structure etc

11 Skilled man power shall be provided at site to engineer-in-charge for checking of lines levels and specifications etc who shall be at the disposal of the engineer-in-charge If not provided by the contractor than same shall be engaged by the Corporation on Contractorrsquos cost and the payment made shall be recovered from the contractor

12 Contractor is to abide by the instruction issued by the Engineer-in-charge amp Client Department Authority regarding collectionstorage of material at site

13 All service lines ie water supply sewer telephone Electricity etc at the site shall have to be taken care of by the contractor during the execution Any damage to these lines shall have to repaired by the contractor

14 All finishing material shall be got approved by the Clientcompetent authority before execution

15 All hidden works shall be got checked necessarily from the engineer-in-charge before covering them for which the contractor shall inform the engineer-in-charge well in time

16 Final payment shall be made only after satisfactory handing over of the said work to the clientdepartment All materials shall be got tested before use by the contractor at his own cost as directed by Engineer-in-charge

17 Defect liability shall be 1 year for the said work

18 The Tenderers are advised to visit the site before quoting the rates and to seek any clarification regarding said work they can contact the engineer-in-charge during office hours

19 The rates quoted by the contractor shall be deemed to be inclusive of Sales tax Income Tax Service tax Royalty Labour cess amp any other taxdutycess applicable by law at the time of payment and shall be borne by the contractor for performance of the contractor The employer shall deduct such taxes as per applicable law

20 The Photographsrsquo of site before starting of the work and after completion of work will be provided in two copies by the contractor at his own cost amp no extra cost will be paid by department

21 The rates quoted by the contractor will remain valid upto four months Validity period on the written consent of the contractor can be extended

Signature of Contractor with seal and full address with mobile No

General Manager-Works RTDC Ltd Jaipur

5

RAJASTHAN TOURISM DEVELOPMENT CORPORATION LIMITED JAIPUR

(WORKS DIVISION)

TENDER DOCUMENT (Technical Bid)

E-Tender (NIT No) 082016-17

Name of work- Pushkar Market Street- Restoration And Development Works

Mirror

Signature of Contractor

6

UNDERTAKING

THE GENERAL MANAGER ndashWORKS RTDCLTD JAIPUR

Dear Sir

Having examined and understood terms amp conditions the plans specifications and Schedule of

Quantities for the work prepared by your Architects Engineers IWe hereby offer to execute the work at the

rates which IWe have quoted for respective items specified IWe herewith enclose myOur DD no------------

----------dated---------------Name of bank-----------------------------------------------------------for Rs

as earnest money for execution at myour tendered rates

In the event of this Tender being accepted IWe agree to enter into agreement as amp when required

to execute the work

Yours Faithfully

CONTRACTOR (Name amp Full address with seal)

7

MEMORANDUM IWe hereby tender for execution for the work within time specified and rates entered in the schedule G in all respects in accordance with the specifications designs drawings and instructions in writing referred to herein and in the annexed conditions with such materials as are provided for by and in all other respects in accordance with such conditions so far as applicable IWe have visited the site of work amp IWe amare fully aware of all the difficulties amp conditions likely to effect carrying out of the work IWe have fully acquainted myselfourselves about the conditions in regard to accessibility of site and quarrieskilns nature and the extent of ground working conditions including stacking of material installation of TampP conditions affecting accommodation and movement of labour etc required for the satisfactory execution of this contract (a) Name of work (b) Estimated Cost (in figures) Rs

(in words) Rs

(c) Earnest Money Rs (d) Security Deposit (Including Earnest Money) Rs NOTE (1) Security deposit to be 10 in the form of cash or deduction to be made from running bills (2) Time allowed for the work to be reckoned from the 10

th day after the date of written order to

commence the work Should this tender be accepted in whole or in part IWe hereby agree to abide-by and fulfill all terms and provisions of the conditions of contract annexed hereto and in the NIT or in default thereof to forfeit and pay to the General Manager (Works) Jaipur the sum of money mentioned in the said conditions A sum of Rs is enclosed herewith as earnest money This amount of earnest money shall absolutely be forfeited to Department without prejudice to any other right or remedies should IWe fail to commence the work specified in the above memorandum or should IWe not furnish performance guarantee in cash or in form or Bank guarantee at the time of execution of agreement specified in the above memorandum in accordance with the said conditions of contract

Signature of Contractor The above tender is hereby accepted by me

General Manager-Works

RTDCLTD JAIPUR

8

DIRECTIONS FOR GUIDANCE OF CONTRACTORS

1 All works proposed for execution by contract will be notified in a form of invitation to tender pasted on a board hung up in the

office and signed by General Manager-Works RTDC LTD Jaipur or duly authorized officer

The form of invitation to tender will state the work to be carried out as well as the date of submitting and opening of tenders

amp the time allowed for carrying out the work also the amount of earnest money to be deposited with the tender and the

amount of security deposit to be deposited by the successful tenderer and the percentage as per PWFampAR Govt of

Rajasthan to be deducted from the bills copies of the specifications designs and drawing and estimated ratesscheduled

rates and any other documents required in connection with the work for the purpose of identification by the Rajasthan

Tourism Development Corpn Jaipur Drawings shall also be open for inspection by the contractor at the office of the General

Manager9 Works) Rajasthan Tourism Development Corporation Ltd Jaipur or duly authorized Engineer during office hours

2 In the event of the tender being submitted by a firm it must be signed separately by each partner thereof or in the event of

the absence of any partner it must be signed on his behalf by a person holding power of attorney authorizing him to do so

3 Receipt for payment made on account of a work when executed by a firm must also be signed by the several partners

except where the contractor are described in their tender as a firm in which case the receipt must be signed in the name of

the firm by one of the partners or by some other person having to give effectual receipts for the firm

4 Any person who submits tender shall fill up the usual printed form stating at how much percent above or below the rates

specified or on item rates he is willing to undertake the work Tenders which propose any alteration in the work specified in

the said form of invitation to tender or in the time allowed for carrying out the work or which contain any other conditions of

any sort will be liable to rejection No single tender shall include more than one work but person who wish to tender for two

or more works shall submit a separate tender for each work Tender shall have the name and number of the work to which

they refer written outside the envelope

5 The General Manager-Works RTDC Ltd Jaipur or other duly authorized Engineer will open the tenders in the presence of

any intending contractors or their authorized representative who may be present at the time and will enter the amounts of the

several tenders in the Register of tenders in the event of the tender being accepted A receipt for the earnest money

forwarded therein shall there upon be given to the contractor who shall there-upon for the purpose of identification sign

copies of the specifications and other documents In the event of a tender being rejected the earnest money forwarded with

such unaccepted tender shall be returned to the contractor

6 The General Manager-Works RTDC Ltd Jaipur or other authorized Engineer shall have the right of rejecting all or any of

the tenders without assigning any reasons

7 The accompanying schedules of quantities in ldquoGrdquo Schedule are the architects estimated quantities for the work The

contractors shall attach histheir OWN prices for the each item in column for rates left blank and shall money out the same in

the final column amp totals HeThey shall fill up properly the form of tender and the schedule of quantities without adding any

stipulations thereto The tender shall show the total amount arrived at in the manner above described The tender Notice to

Contractors conditions of contract Specifications and the Schedule of quantities and rates etc shall all be embodied in and

shall form a part of the contract

8 The quantities contained in the Schedule are only approximately correct If more or less quantities are actually done on the

work the contractors shall be paid for the same at the rates tendered by himthem in the Schedule of Rates The work as

actually done will be measured by the contractors qualified engineer and bill furnished to the General Manager(Works)

RTDC Ltd Jaipur which in turn will get it checked by the Engineer in charge time to time and will be paid for as provided in

the Special Condition of Contract after deducting SD as per PWFampAR provisions

Signature of Contractor

9

GENERAL CONDITIONS OF CONTRACT 1 All the materials used shall be of approved quality and to the entire satisfaction of the General Manager-works RTDC Ltd

Jaipur

2 The General Manager-works RTDC Ltd Jaipur or the Engineer in charge reserves right for any additions and alternations or

omission in the tender and execution of works In case the Department supplies the material specified in the tender recovery for

the cost of supplied material from subsequent running Bill will be made

3 The Department shall pay to the contractor as detailed in special conditions of contract

4 The contractors isare to set out the work in accordance with the plans All lines to be accurately marked or otherwise to the

satisfaction of the Engineer in charge

5 The contractors shall meet the Engineer in charge or his representative at the works site whenever required

6 The contractors shall maintain and be represented on site at all times by a responsible and efficient EngineerArchitect who

thoroughly understands all the trades enrolled The Engineer in charge reserves the right to dismiss the Foremen and any

workmen who in his opinions are not sufficiently skilled or who neglect or refuse to obey instructions

7 The contractors shall be given one set of the plans free of charge

8 The General Manager-works RTDC Ltd Jaipur reserves the right of altering the drawings and nature of the work and adding

to or omitting any item of work or having portions of the same carried out departmentally or otherwise and such alterations or

variations shall be carried out without prejudice to the contract

9 The General Manager-works RTDC Ltd Jaipur reserves to the right to increase or decrease quantity of work or omit some part

of the work without violating the contract and for which he will not be held liable to compensation to the contractors

10 All plants machines and other equipments are to be arranged by contractor for the work

11 Any percentage rate tender containing item-wise rates and any item rate tender containing percentage rate below or above

estimatedscheduled rates will be summarily rejected

12 The Conditions of Contract shall govern sales tax or any other tax on materials or Income Tax in respect of the contract

Deduction of Income Tax at source will be made as per provisions of the Income Tax Act in force from time to time

13 If on check there are differences between the rate quoted by the Contractor in words and figures or in the amount worked out

by him the following procedure shall be followed -

(i) Where there is a difference between the rates in figures and words lower of the two rates shall be taken as valid and correct

rate

(ii) When the rate quoted by the contractor in figures and in words tallies but the amount is not worked out correctly the rate

quoted by the contractor shall be taken as correct and not the amount worked out

(iii) While quoting rates if raterates against any item or items are found to be omitted the rate given in the Schedule G by the

Department for such items will be taken into account while preparing comparative statement and contractor shall be bound to

execute such item on G Schedule rates

(iv) In case where percentage is given but the above or below not scored the tender will be non-responsive

14 The Contractor shall read the specifications and study the working drawings carefully before submitting the tender

15 After acceptance of the tender the Contractor or all partners (in the case of partnership firm) will append photographs and

signatures duly attested at the time of execution of agreement

16 Experience into similar nature of works for which tender invited and fulfill conditions of NIT

17 Contractors shall submit only unconditional tenders Conditional tenders are liable to be rejected similarly

Signature of Contractor

General Manager-Works

10

SPECIAL CONDITIONS OF CONTRACT

1 The Technical bid will be opened first on the day mentioned in the NIT Bidders will be evaluated as per norms set for

qualification in Technical bid and Financial bids of only those bidders will be opened which were qualify in the technical bid

2 Contractors bidding for the work should be reputed experienced contractors fulfilling the requirements laid down in the NIT

and well versed and working in the field Only those bidders will be considered qualified in the Technical bid who have

executed similar works to the tune of at least 13rd of the estimated value of the work (published in NIT) during last five

years (updated to current price level 100 per annum) and have the necessary technical expertise and support

machinery and administrative and financial capability to satisfactorily execute works in question for which they are bidding

3 The decision of the General Manager-works RTDC Ltd Jaipur or his representative on pre-qualification in the Technical bid

will be final amp binding

4 All raw materials will have to be brought to the site and all carving work will have to be executed only at site to qualify for

payment of running bills No payment of any material at or work done at place other than the site of work will be made

unless such material is brought to site and found acceptable to be used on the work

5 General conditions of contract special conditions of contract and specification of work as appended herewith in addition to

General condition of agreement will be applicable on this work In addition the PWD specifications will also be applicable

as relevant to the particular item of work

6 Work shall be carried out as per approved drawings and designs to be provided by the departmental architect engaged

7 Architectural work for the construction shall be of a high standard quality and pattern (class and style) to match the existing

work

8 All work shall be carried out as per approved samples of each element

9 The exposed surface of stonework will be suitably protected from damage disfigurement during the course of work and will

be cleaned and washed removing all spots etc for final acceptance on completion

10 All scaffolding shuttering TampP etc for the work shall have to be arranged by contractor at his own cost

11 The time for completion of work as given in the NIT shall be strictly adhered to and the work so planned as to be completed

within the scheduled period The contractor shall provide with a time schedule to the department for progressing with and

completing various stages of the work

12 Only best quality stone and other building materials shall be used in construction and all such material will be got approved

from the Engineer in-charge before use

13 Quantities of individual items can be increased invariably or even reduced withdrawn and specification and designs altered

at the discretion of Engineer in-charge and contractor will not be entitled to any compensation thereof for such alteration For

extra items if any rates will be decided based on market analysis to be provided by contractor

14 Contractor will give notice before any work is covered up Bad work will have to be redonereplaced at contractors cost

15 Full scale drawings form work for architectural stone work to be developed from drawings wherever necessary shall be got

prepared by contractor for prior approval before Signature of contractor

construction at his own cost and he will get these approved from the Engineer in-charge General Manager-Works RTDC

Ltd Jaipur who shall however be at liberty to modify such drawings form work and no extra payment shall be made for this

16 It will be the contractors responsibility to get the drawings formwork and sample of individual itemselements of work

approved from the departmental Architect Engineer before proceeding with manufacture of the same at site

17 The contractor shall provide adequate safety measures and proper insurance for his labour working at site and it shall be

done by contractor at his end Contractor shall settle all labour disputes at his own level The contractor shall observe all

labourfactory laws in force

18 Security deposit will be recovered from each running bill of contractor as per provisions of PWFampAR Earnest money will be

adjusted in the security deposit amount Security deposit shall be returned after one year satisfactory completion of the work

and on satisfactory performance of structure

19 No escalation will be payable even if the completion period exceeds that as stipulated

20 In case of unsatisfactory work by contractor or deliberate delaying the work without valid reasons the contract will be liable

to be terminated at the stage up to which acceptable work is done and paid for with no compensation of any sort payable to

contractor for withdrawal at that stage and possession of work executed at site will be taken over by Department In case of

any dispute the decision of the Department will be final and binding on the contractor

21 The bidder has to furnish with his technical bid (In prescribed Performarsquos Schedule 1-5)

Full information regarding financial resources and capability in Schedule-1 herewith(Photocopy to be made out of schedule)

a) Details of works of similar type and magnitude completed in last 5 years by the tenderer in Schedule II (Photocopy to be

made out of schedule)

b) Details of works bids and works to be completed in Schedule-III (Photocopy to be made out of schedule)

c) Details of technical supervisory personnel and master craftsman craftsman which he proposes to utilize for this work in

Schedule IV (Photocopy to be made out of schedule)

d) Details of plant and equipment proposed for use in the work in Schedule V (Photocopy to be made out of schedule)

11

e) The bidder should demonstrate that they have adequate financial resources (Over draft Credit Limit letter from bank)

Signature of Contractor

22 Bid capacity

(i) Bidders who meet the minimum qualifying criteria are to be evaluated further for Bid capacity as under -

(a) Maximum value of similar works executed in any one year during the last five years including current year (updated to the

current price level) extracted from schedule II which will take into account the completed and on going works

(b) Value of the existing commitments works (complete or partial) to be completed in the coming 12 months (up dated to the

current price level) Extracted from schedule III

(ii) Bid Capacity=(AxNx3-B) where

A=Maximum value of works executed in any one year during the last five years (updated to present price level) taking into

account the completed as well as works in progress

N=Number of years prescribed for completion of the works for which bids are invited herein (in years)

B=Value at present price level of existing commitments and on going works (at hand) to be executed during N period

The bidder will be post qualified only if his bid capacity is equal or more than the cost of work in question No contract may be

awarded to bidder lacking the financial and technical resources to undertake the work The decision of General Manager

(Works) Rajasthan Tourism Development Corporation Ltd Jaipur in this regard will be final and binding

NOTE -The present price level for turn over cost of completed works and amount of similar nature works (of a value at least 13rd of the estimated value of the work published in NIT during last five years) the previous years value shall be given weightage of 10 per year as following for the tendersbids invited by this department ndash

(a) For last year - 100 (b) For one year before - 110 (c) For two year before - 121 (d) For three year before - 133 (e) For four year before - 146

For current year the price level shall be 10

23 The right to qualify or not to qualify any or all the bidders without assigning any reason is reserved with the General Manager

(Works) Rajasthan Tourism Development Corporation Ltd Jaipur

24 Determination of Responsiveness

a) Prior to the detailed evaluation of bids the General Manager (Works) Rajasthan Tourism Development Corporation Ltd

JAIPUR will determine whether each bid is substantially responsive to the requirements of the bidding documents

b) For the purpose of this clause a substantially responsive bid is one which has required capacity capability and financial

resources and whose bid conforms to all the terms conditions and specifications of the bidding documents without

material deviation or reservation A material deviation or reservation is one which affects in any substantial way the

scope quality or performance of the works or which limits in any substantial way the General Manager (Works)

Rajasthan Tourism Development Corporation Ltd JAIPURrsquoS right or the Bidders obligations under the contract and the

rectification of which deviation or reservation would effect unfairly the competitive position of other bidders presenting

substantially responsive bids

c) if a bid is not substantially responsive to the requirements of the bidding documents it will be rejected and may not

subsequently be made responsive by the bidder having corrected or withdrawn the nonconforming deviation or

reservation

25 Construction programme ndash

1) Within the time stated in this contract the Contractor shall after the acceptance of his tender submit to the General Manager

(Works) Rajasthan Tourism Development Corporation Ltd JAIPUR for approval programme together with bar chart PERT

chart

2) proposed deployment of machinery etc showing the order of procedure in which he proposes to carryout the works The

contractor shall provide in writing general description the arrangements deployment of equipment work planning and

methods which he proposes to adopt for the execution of the works

3) If at any time it should appear to the Department that actual progress of the work does not conform to the approved

programme referred to in sub-clause (1) of this clause the Contractor shall produce at the request of the Department a

revised programme showing the modifications to the approved programme necessary to ensure completion of the works

within the time for completion

4) The submission to and approval by the Department of such programmers or the furnishing of such particulars shall not

relieve the contractor of any of his duties or responsibilities under the contract

5) The contractor shall submit within 30 days after the date of notice to proceed with the work a detailed construction

programme to suit the programme of completion for the entire contract period This programme shall be reviewed and

revised every half year at the beginning of the working season to plan timely action for making up the slippages occurred in

the previous season to suit the stipulated period of completion (including mile stones) as extended from time to time

26 Materials workmanship period and certificates of Maintenance and Defect Liability etc

All materials and workmanship shall be of the respective kinds described in the contract and in accordance with the

ArchitectsEngineer instructions and shall be subjected from time to time to such tests as the Engineer may direct at the

place of manufacture or fabrication or on the site or at such other place or places as may be specified in the Contract or at

all or any of such places The contractor shall install quality control laboratory and provide such assistance instruments

machines labour and materials as are normally required for examining measuring and test in any work and the quality

weight or quantity of any material used and shall supply samples of materials before incorporation in the works for testing as

may be selected and required by the Engineer-in-charge

12

Signature of Contractor

27 Period of maintenance and Defects liability

The Contractor shall be responsible to make good within such period as maybe stipulated by the Engineer in-charge any

defect which may develop or may be noticed during period of maintenance of 12 months from the certified date of

completion and which is attributable to the contractor All notice of such defect shall be given to the Contractor promptly In

case the contractor fails to make good the defects the Engineer in-charge may employ other persons to make good such

defects and all expenses consequent thereof and incidental thereto shall be recoverable from the Contractor In the event

the employer takes over portions of work as they are completed the liability of the contractor under this clause for these

portions shall extend to a period of 24 months from the actual dates on which portions of the works are taken over

28 The successful biddercontractor is required to undertake detailed photo recording documentation by still photography

videography of the entire work prior to commencement and the same has to be deposited with the Engineer in charge of

RAJASTHAN TOURISM DEVELOPMENT CORPORATION JAIPUR in two copies immediately Before dismantling any old

work to redo this still photography with specifically putting some identity mark number of the portion by any specified means

has to be done and this to be got checked and certified by Engineer In charge and recorded specifically in the measurement

book (MB) A written permission from the Engineer in charge before commencement of executing such work is essential for

execution as well as for payments

During the work in progress and after its completion also photo documentation is necessary and the photos before amp after

completion of portion of work are essentially to be enclosed with the bill for payment

Signature of Contractor

GENERAL MANAGER (WORKS)

13

SCHEDULE-I

FINANCIAL RESOURCES AND CAPABILITY

(PURSUANT TO CLAUSE 26) 1 Name of Applicant

2 Name of Partner Director

3 Capital

(a) Authorised

(b) ii

4 (a) WhetheCategory of Enlisted in Govt

(b) Details Details of the work completed and applicants performance record for last five years

(information to be furnished in Schedule II in India

(c) Details of works in hand applicants performance record for last five years (Information to be

furnished in Schedule-III)

5 Furnish Balance Sheet and profit and loss statement with auditorrsquos report for the last three years

6 The information on the following aspects should be specifically furnished

(i) Working capital and net worth

(ii) Turnover for the years

a

b

c

(iii) Gross income in years in India

(i)

(ii)

(iii)

(iv) Quick ratio or acid test ration (Quick assets to current liabilities)

7 What is the maximum annual turnover of the project that you can handle (Financial Projection)

8 Have you ever been denied tendering facilities by any Governmental DepartmentPublic Sector

undertaking

(If yes Please give details)

9 List of your source of finance

10 Certificate of financial soundness by Bank

11 Name and address of Bank from whom reference can be obtained

12 Have you ever been declared bankrupt

(if yes please give details)

Signature of Contractor

14

SCHEDULE-II WORKS OF SIMILAR MAGNITUDE TO THE WORK UNDER CONSIDERATION COMPLETED BY THE

APPLICANT IN LAST FIVE YEARS IN INDIA

(Pursuant to Clause 26)

SNo Na

me

of

wor

k

Place

amp

State

Tender

awardi

ng

Agency

Tender

ed Cost

Stipulate

d time of

Completi

on

Time in

which

complete

d

Date

of

comp

letion

Reason

for

Delay

Principal

features

of work

done

Value of

work done

1 2 3 4 5 6 7 8 9 10 11

Year

Year

Year

Signature of Contractor

15

SCHEDULE-III WORKS TENDERED FOR amp WORKS TO BE COMPLETED AS ON THE DATE OF SUBMISSION OF

APPLICATION IN INDIA

(pursuant Clause 26)

SNo Name

of

work

Place

amp

State

Work on Hand Work tendered for

Tender

Cost amp

Date

or

award

Stipulated

period of

Completion

Cost of

work

remaining

to be

executed

Antici

pated

Date

of

compl

eted

Estimate

d cost

(Rs In

Lakh)

Date

when

decisio

n

expecte

d

Stipulate

d Date

period of

Completi

on

Remar

ks

1 2 3 4 5 6 7 8 9 10 11

Year

Year

Year

Signature of Contractor

16

SCHEDULE- IV

Details of Key Personnel intended to be employed for this work

(use separate sheet if necessary)

(Pursuant to clause 26)

S No Name of Person Qualification Designation Experience Work to be

put on

A Technical Personnel

(1)

(2)

(3)

(4)

B Administrative Personnel

(1)

(2)

(3)

(4)

C Master Craftsmen

(1)

(2)

(3)

(4)

D Craftsmen

(1)

(2)

(3)

(4)

E Any other (1)

(2)

(3)

(4)

Signature of Contractor

17

SCHEDULE- V

DETAILS OF MAJOR ITEMS OF CONSTRUCTION PLANT AVAILABLE FOR THIS WORK

S No

Particulars Make Year of manufacture

Nos Whether owned or confirmed lease

1 Lime mortar Mill

2 Scaffolding Material

3 Movable Gantry

Crane etc

4 Any other TampP for

the purpose

5

6

7

8

Signature of Contractor

18

RAJASTHAN TOURISM DEVELOPMENT CORPORATION LIMITED JAIPUR

(WORKS DIVISION)

TENDER DOCUMENT (Financial Bid)

E-Tender (NIT No) 082016-17

Name of work- Pushkar Market Street- Restoration And Development Works

Restoration Conservation work Stained GssMirror

Signature of Contractor

19

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works

(Based on PWD BSR CIVILElectrical Ajmer Circle - 2013 and item rates)

SCHEDULE -G

GENERAL ABSTRACT

SNO WORK AMOUNT

1

PART A- CIVIL WORKS BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

304610000

2

PART B- SANITARY WORKS BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

5936400

3

PART C- HORTICULTURE BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

2627500

4

PART D-NON BSR ITEMS ( CIVIL AND ELECTRICAL)

GRAND TOTAL

I we hereby agree to execute the work PART A In figures Above Below In words

Above below PART B In figures Above Below In words

Above below PART C In figures Above Below In words

Above below PART D In figures Above Below In words

Above below

General Manager Works

RTDC Ltd Jaipur

Signature of the Contractor With Full Postal Address

20

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works

(Based on PWD BSR Civil Ajmer Circle - 2013)

PART A- CIVIL WORKS

SL No Specification Unit Rate QTY Amount

1

Surface Dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr and lift up to 15 Mtr All kinds of soil 100Sqm 437

26

11362

2

Surface Dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr and lift up to 15 Mtr All kinds of soil Cum 127

30

3810

3

Filling available excavated earth (excluding rock) in trenches plinth side of foundation etc in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift Cum 61

12 732

4

Providing and laying in position cement concrete including curing compaction etc complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level

M15 grade Nominal Mix (with graded stone aggregate 20mm nominal size) Cum

3438

230

790740

5

Random Rubble stone masonry for foundation and plinth in Cement Sand mortar above 30 CM thick wall in

21

Cement Mortar 13 ( 1-Cement 3-Sand) Cum

2193

35

76755

6

Random Rubble stone masonry for superstructure above plinth level one storey height above 30cm thick walls in

Cement Mortar 13 ( 1-Cement 3-Sand) Cum

2686

135

362610

7

Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor three level including curing compaction finishing with rendering in cement sand mortar 13 (1 cement 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement for -

Beams suspended floors roofs griders having slopes up to 15ordm landings balconies shelves chajjas lintels bands plain windows sills staircases and spiral staircases etc

M20 grade Nominal Mix

Cum 5138

45

231210

8

Centering amp shuttering with plywood or steel sheets including strutting propping bracing both ways with wooden members and removal of formwork for upto floor three level for

Suspended floors roofs landings staircases balconies girders cantilevers bands coping bed plates anchor blocks sills chhajjas lintel beam etc Sqm 222

60

13320

9

Providing and fabricating reinforcement using steel of SAILVIZAK-RINLTATA TISCONESSARZINDAL VIJAINAGAR IS 1786-1986 for RCC work including straightening cutting bending placing in position and binding (including cost of binding wire) all complete up to floor three level

22

Thermo-Mechanically Treated bars (Conforming of relevent IS code) Kg 78

2630

205140

10

Plaster on new surface on wall in cement sand mortar 13 including racking of joints etc complete fine finish

20mm thick Sqm 161

150

24150

11

6mm thick cement plaster to ceiling of mix 13 (1cement 3 fine sand) Sqm 105

25

2625

12

Polished Blue Kota Stone flooring skirting laid over 20mm thick base of CM 14 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete

13

For area of each slab from 2001 to 5000 SqCm

30mm thick slab

Sqm 988

35

34580

14

Wall Painting with plastic emulsion paint of approved brand and manufacture to give an even shade

Two or more coats on new work including preparation of base with primer putty lippy complete in all respect Sqm 82

76

6232

15

Applying Exterior Emulsion Paint like ACE APEX or equivalent brand and manufacture of required shade to give an even shade including all scaffolding on prepared surface (excluding water primer)

New Work (Two or more coats) Sqm 119

28

3332

16

Applying one coat of Asian Paints DECO Primer (Water thinnable) of approved brand amp manufacture ic scrapping by sand papering and preparing the even surface on wallwall putty as base for ACE APEX or APEX ULTIMA ic all scaffolding(New Surface) Sqm 24

104

2496

23

17

providing and fixing steel gategrating and grills made of anglesteessqure bars flats or blackpipe with holdfast and fitting complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide kg 83

1250

103750

Demolishing cement concrete including disposal of material with in 50 meter lead

136 or richer mix Cum 319

30

9570

148 or leaner mix Cum 311

20

6220

18

Demolishing RCC work manually by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge

Cum 1085

30

32550

19

Rough chisel dressed stone flooring over 20mm (Av) thick base in CM 16 including pointing with cement mortar 12 (1 cement 2 stone dust) with and admixture of pigment to match the shade of stone with joint thickness upto 15mm

45mm thick red sand stone

Sqm 385

230

88550

20

Providing and fixing 1st quality standard white grey ivory fume red brown light green light blue and other light shades glazed tiles confirming to IS 13753 amp IS 15622 of size 300mm x 200mm in walls floors steps pillars etc laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar)

Catogary-A Kajaria Johnson Somani Orient make Sqm 763

25

19075

24

21

Applying one coat industrial grade bitumen of penetration 2585 of approved quality using 170 kg per Sqm on Damp Proof Coarse after cleaning the surface with brushes and finally with a piece of cloth slightly soaked in kerosene oil Sqm 103

45

4635

22

Providing and Fixing 30 too 40 mm thickk stone chajjas in cement sand mortar 14 including making gola at junction with wall concrete M-15 grade (124 nominal mix drip course

20 mm thick plastering in CM 16 on both Sqm 645

35

22575

23

Providing and fixing steel gate grating and grills made of angles tees square bars flatsor black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide

Kg 83

9750

809250

24

Extra if squarerectangular hollow tubelar sections are used or grill made by flats only

Kg

10

6490

64251

P amp F bolts including nuts and bolts complete

Kg 57

240

13680

25

Painting with ready mix paint of approved brand and manufacture in all shades to give an even shade

New Steel Work Sqm 40

1500

60000

Welding by electric plant cmlength 286

15000

42900

TOTAL OF BSR WORKS CIVIL

3046100

25

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - B- SANITARY WORKS

SL No Specification Unit Rate QTY Amount

1

P amp F GI Pipes (External Work) with GI Fittings excluding union (IS 1239 Mark) including trenching amp refilling earth etc

40mm dia nominal bore A Class

Mtr 338

32 10816

25mm dia nominal bore A Class

Mtr 182

48 8736

2

Making connection of GI distribution Branch with GI main including all Fitting

Beyond 25mm amp upto 100mm dia Each 332 8 2656

3

P amp F Sand ndashcast Floor Trap (Nahni) of (IS1729 mark) of approved qualitymake with socket down or hinged grating including cutting and making good the floor- 100 x 100mm Each

421

4 1684

4

P amp F Gun-metal Full-way Valve (IS778 Mark) or wheel valve of approved make

Gun metal 25mm nominal bore Each 702 4 2808

Gun metal 40mm nominal bore Each 1065 4 4260

5

P amp F PVC Storage Tank ISI Marked (IS 12701) indicating the BIS license No) of approved make with cover 25mm dia 1M long GI over-flow pipe amp 25 Cm long wash out pipe with plug amp socket including making connection etc complete of approved design

1000 litres capacity Each 5437 4 21748

6

P amp F push cock superior quality of approved make

CP brass 15 mm

Each 416

16 6656

TOTAL 5936400

26

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - C-HOTICULTURE WORKS

SL No Specification Unit Rate QTY Amount

1

Supply of dry manure including loading unloading transportation amp stacking at site

Goat dungmanure

Cum

50000

35

17500

2

Supply amp Stacking good earth at site complete including loading unloading amp transportation etc Cum

7500

55

4125

3

Supply of different varities of treeshrubsclimbers according to height and age of the plant at site including loadingunloading amp transportation etc complete

Different flowing plants 900mm to 1500mm Each

1500

115

1725

4

Supply of different varities of bougainvillea in poly bagsearthen pots according to height growth amp age of plant at site including loadingunloading amp transportation etc complete

Local variety of bougainvillea 600 mm to 900mm Each

1500

75

1125

5

Digging pits in ordinary soil amp refilling the same with the excavated earth mixed with manure in the ratio 21 by volume (2 parts of stacked volume of earth after reduction by 20 1 parts of stacked volume of manure after reduction by 8) flooding with water and dressing including removal of surplus earth Each

1000

150

1500

27

(Cost of manure or extra good earth if needed to be paid separately) pit dia 60 cm X 60 cm deep

6

Spreading of manure and good earth in required thickness (cost of manure and good earth to be paid separately) Cum

400

75

300

TOTAL OF HORTICULTURE WORKS

26275

28

SCHEDULE OF QUANTITIES

Name of work Pushkar Market Street- Restoration And Development Works

(Based on item rates)

PART - D- NON SOR WORKS

SL No

Specification Unit Rate to

be Quoted

QTY

Amount

1

Providing and fixing fine dressed sand stoneapproved stone JALIas per existing matching geometrical design including moulding work with fine finishing fixing with thambli by proper adhesive and white cement with pigment including making groove etc complete in all respect

(b) 50mm thick Sqm 45

2

Providing amp fixing ashlar Rain water Spouts (3) lines dressed as per traditional practice existing design approved design size 60 x 30 x 25 cm fixing the rain water spout with lime surkhi mortar 12 with proper slope complete in all respect Each

12

3

Providing amp fixing ornamental stone cladding of approved sand stone with dressing complete as per existing designpatternapproved designfixing with 30mm thickgrinded lime surkhi mortar 12 amp pointing with white cement with araldite and pigment to match shade the stone complete in all respect as per direction of Engineer incharge(75mm thick) Sqm

54

4

Providing and fixing fine dressed sand stone Dasacoping as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect

(c) 75mm to 100mm thick with pan patti design Sqm 320

5

Providing and fixing fine dressed sand stone Cladding (Plain dressing only) as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect including removal of damaged cladding

(a) 50mm to 60mm thick Sqm 180

6

Supply and istallation whiteredapproved shade sandstone dustbin of size 800 mm x 450 mm and height 850 mm with hollow center to hang MS Dustbin of size 400mmx 500mmx 600 mm made of 1mm thick metal sheet fixed to stone pillars with MS chain edged with 50x50x5 mm angle sections including cutting welding and fabrication with priming coat of red oxide and approved ready mix paint of approved shadeStone peices joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 26

29

7

Supply and istallation of RedWhiteapproved shade stone bench of size 1500mmx450mmx450 mm horizontal stone members of size 300mmx400mmx450mm on two sides supporting the horizontal seating stone of 150 mm thickness fixed to vertical stone members joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 35

8

Poviding fixing testing and commisioning of Stainless Steel body bull Storage Capacity in (litres) 150 bull Nominal Cooling Capacity (Litreshr) 150 bull No Of Faucets 2 bull Dimensions 820W x 700D x 1235 H bull Normal Demand (glasses hr) 750 bull Refrigerant R-22 bull Current (Amps) 749 bull Water Overflow (Connections) 12 BSP bull Type Of Compressor Rotary Model No- SDLX15150A make Blue star or similar in make of VoltasOasis

Each 4

9

Providing fixing testing and commissioning of water purification system having auto shut-off e-boiling Voltage Stabilizer bull Type of Treatment- sediment filter active carbon cartridge mineral guard UV chamber bull water flow rate 3ltrminbull ultra- violet lamp of 16 watts bull power rating of 35watt bull Dimensions 355H x 1025D x 307WModel ndash Hi fio Make Eureka Forbes- aquagard or similar in make of livpurekent

Each 4

10

Demolishion of the existing bituminous road surface to a depth of 150 mm and disposal of demolished material with a lift upto 3 m and lead upto 1000 m

Sqm 50

11

Providing and fixing fine dressed sand stone flooring with white sand stone (Bansh paharpurdholpur stone) (panji marked surface) machine cut of approved shade set in pattern over 30mm thick base in cement mortar 16 including pointing with cement mortar 12 (1 cement2 stone dust) mixed with pigment to match the shade of stone with joint thickness upto 5 mm as per existing flloringsample approved by the consultantapproved by (75mm thick)

Sqm 730

12

Providing and Fixing Cobbles stone of lime sand stone size 100X100MM and theakness of 70 to100mm on path way open court yards of color shade approved by the consultant over cement mortar 13 ( 1 cement3 course sand) keeping 10mm joint between cobbles filled with cement mortar 13 ( 1 cement3 course sand) the mortar should remain recessed by 5mm from the top surface of the cobble stone complete in all respects as per design and details provided by the consultant

Sqm 1650

13

Supply and installation of sanstone signage 450x200 mm of redwhiteapproved shade Sandstone 75 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete with fixing with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 6

30

14

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 450mmx2400mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved with ornamentation in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

15

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 650mmx1200mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

16

Heritage signage shall be etched on to Dulmera stone plaque of size 18m x 14m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 4

17

Signage shall be etched on to Dulmera stone plaque of size 18m x 10m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 12

18

Providing and fixing MS steel sheets 3 mm thickness on to MS anfgles flats tees and hollow sections with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Kg 10640

19

Providing and fixing MS perforated sheets 3 mm thickness with diamondround shaped perforations as per sample approved by the consultant with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Sqm 90

20

Painting of shop signages with lettering in hindienglish and ornamental design patterns in ready mix paint of approved brand and manfacture in all shades to give an even shade as per drawings and details provided by the consultant

Sqm 560

21

Flush pointing over joints of dressed stone cladding chajjas jali etc with neat cement sand amp colour including racking the joints as per Jodhpur practice including all leads and lifts with grinded mortar of lime putty and stone powder mixed in 11 ratio and gur methi gugal etc are to be mixed as per old traditional practice

Sqm 75

22

Khamira Colour Washing as per old traditional practice to prepare the Khamira the lime should be slaked at least for 7-10 days and regularly it should be stirred by adding cured Gugal for non-synthetic colour adding gum (babool gum) as per specificationThen applying prepared solution on walls three to four thin coats as desired finishing

Sqm 1750

31

23

Providing amp applying Lime kara 12 (1lime cream 2 Zikki powder) grinding mortar with grinding millmanually on lime baseon all flat surface in two coatsFirst coat applying 3mm to 4mm thick and curing properly at least 7 dayssecond finishing coat done after 7days of previous coat as per traditional practice(thickness not more than 6 mm)

Sqm 155

TOTAL OF NON SOR WORKS

5

RAJASTHAN TOURISM DEVELOPMENT CORPORATION LIMITED JAIPUR

(WORKS DIVISION)

TENDER DOCUMENT (Technical Bid)

E-Tender (NIT No) 082016-17

Name of work- Pushkar Market Street- Restoration And Development Works

Mirror

Signature of Contractor

6

UNDERTAKING

THE GENERAL MANAGER ndashWORKS RTDCLTD JAIPUR

Dear Sir

Having examined and understood terms amp conditions the plans specifications and Schedule of

Quantities for the work prepared by your Architects Engineers IWe hereby offer to execute the work at the

rates which IWe have quoted for respective items specified IWe herewith enclose myOur DD no------------

----------dated---------------Name of bank-----------------------------------------------------------for Rs

as earnest money for execution at myour tendered rates

In the event of this Tender being accepted IWe agree to enter into agreement as amp when required

to execute the work

Yours Faithfully

CONTRACTOR (Name amp Full address with seal)

7

MEMORANDUM IWe hereby tender for execution for the work within time specified and rates entered in the schedule G in all respects in accordance with the specifications designs drawings and instructions in writing referred to herein and in the annexed conditions with such materials as are provided for by and in all other respects in accordance with such conditions so far as applicable IWe have visited the site of work amp IWe amare fully aware of all the difficulties amp conditions likely to effect carrying out of the work IWe have fully acquainted myselfourselves about the conditions in regard to accessibility of site and quarrieskilns nature and the extent of ground working conditions including stacking of material installation of TampP conditions affecting accommodation and movement of labour etc required for the satisfactory execution of this contract (a) Name of work (b) Estimated Cost (in figures) Rs

(in words) Rs

(c) Earnest Money Rs (d) Security Deposit (Including Earnest Money) Rs NOTE (1) Security deposit to be 10 in the form of cash or deduction to be made from running bills (2) Time allowed for the work to be reckoned from the 10

th day after the date of written order to

commence the work Should this tender be accepted in whole or in part IWe hereby agree to abide-by and fulfill all terms and provisions of the conditions of contract annexed hereto and in the NIT or in default thereof to forfeit and pay to the General Manager (Works) Jaipur the sum of money mentioned in the said conditions A sum of Rs is enclosed herewith as earnest money This amount of earnest money shall absolutely be forfeited to Department without prejudice to any other right or remedies should IWe fail to commence the work specified in the above memorandum or should IWe not furnish performance guarantee in cash or in form or Bank guarantee at the time of execution of agreement specified in the above memorandum in accordance with the said conditions of contract

Signature of Contractor The above tender is hereby accepted by me

General Manager-Works

RTDCLTD JAIPUR

8

DIRECTIONS FOR GUIDANCE OF CONTRACTORS

1 All works proposed for execution by contract will be notified in a form of invitation to tender pasted on a board hung up in the

office and signed by General Manager-Works RTDC LTD Jaipur or duly authorized officer

The form of invitation to tender will state the work to be carried out as well as the date of submitting and opening of tenders

amp the time allowed for carrying out the work also the amount of earnest money to be deposited with the tender and the

amount of security deposit to be deposited by the successful tenderer and the percentage as per PWFampAR Govt of

Rajasthan to be deducted from the bills copies of the specifications designs and drawing and estimated ratesscheduled

rates and any other documents required in connection with the work for the purpose of identification by the Rajasthan

Tourism Development Corpn Jaipur Drawings shall also be open for inspection by the contractor at the office of the General

Manager9 Works) Rajasthan Tourism Development Corporation Ltd Jaipur or duly authorized Engineer during office hours

2 In the event of the tender being submitted by a firm it must be signed separately by each partner thereof or in the event of

the absence of any partner it must be signed on his behalf by a person holding power of attorney authorizing him to do so

3 Receipt for payment made on account of a work when executed by a firm must also be signed by the several partners

except where the contractor are described in their tender as a firm in which case the receipt must be signed in the name of

the firm by one of the partners or by some other person having to give effectual receipts for the firm

4 Any person who submits tender shall fill up the usual printed form stating at how much percent above or below the rates

specified or on item rates he is willing to undertake the work Tenders which propose any alteration in the work specified in

the said form of invitation to tender or in the time allowed for carrying out the work or which contain any other conditions of

any sort will be liable to rejection No single tender shall include more than one work but person who wish to tender for two

or more works shall submit a separate tender for each work Tender shall have the name and number of the work to which

they refer written outside the envelope

5 The General Manager-Works RTDC Ltd Jaipur or other duly authorized Engineer will open the tenders in the presence of

any intending contractors or their authorized representative who may be present at the time and will enter the amounts of the

several tenders in the Register of tenders in the event of the tender being accepted A receipt for the earnest money

forwarded therein shall there upon be given to the contractor who shall there-upon for the purpose of identification sign

copies of the specifications and other documents In the event of a tender being rejected the earnest money forwarded with

such unaccepted tender shall be returned to the contractor

6 The General Manager-Works RTDC Ltd Jaipur or other authorized Engineer shall have the right of rejecting all or any of

the tenders without assigning any reasons

7 The accompanying schedules of quantities in ldquoGrdquo Schedule are the architects estimated quantities for the work The

contractors shall attach histheir OWN prices for the each item in column for rates left blank and shall money out the same in

the final column amp totals HeThey shall fill up properly the form of tender and the schedule of quantities without adding any

stipulations thereto The tender shall show the total amount arrived at in the manner above described The tender Notice to

Contractors conditions of contract Specifications and the Schedule of quantities and rates etc shall all be embodied in and

shall form a part of the contract

8 The quantities contained in the Schedule are only approximately correct If more or less quantities are actually done on the

work the contractors shall be paid for the same at the rates tendered by himthem in the Schedule of Rates The work as

actually done will be measured by the contractors qualified engineer and bill furnished to the General Manager(Works)

RTDC Ltd Jaipur which in turn will get it checked by the Engineer in charge time to time and will be paid for as provided in

the Special Condition of Contract after deducting SD as per PWFampAR provisions

Signature of Contractor

9

GENERAL CONDITIONS OF CONTRACT 1 All the materials used shall be of approved quality and to the entire satisfaction of the General Manager-works RTDC Ltd

Jaipur

2 The General Manager-works RTDC Ltd Jaipur or the Engineer in charge reserves right for any additions and alternations or

omission in the tender and execution of works In case the Department supplies the material specified in the tender recovery for

the cost of supplied material from subsequent running Bill will be made

3 The Department shall pay to the contractor as detailed in special conditions of contract

4 The contractors isare to set out the work in accordance with the plans All lines to be accurately marked or otherwise to the

satisfaction of the Engineer in charge

5 The contractors shall meet the Engineer in charge or his representative at the works site whenever required

6 The contractors shall maintain and be represented on site at all times by a responsible and efficient EngineerArchitect who

thoroughly understands all the trades enrolled The Engineer in charge reserves the right to dismiss the Foremen and any

workmen who in his opinions are not sufficiently skilled or who neglect or refuse to obey instructions

7 The contractors shall be given one set of the plans free of charge

8 The General Manager-works RTDC Ltd Jaipur reserves the right of altering the drawings and nature of the work and adding

to or omitting any item of work or having portions of the same carried out departmentally or otherwise and such alterations or

variations shall be carried out without prejudice to the contract

9 The General Manager-works RTDC Ltd Jaipur reserves to the right to increase or decrease quantity of work or omit some part

of the work without violating the contract and for which he will not be held liable to compensation to the contractors

10 All plants machines and other equipments are to be arranged by contractor for the work

11 Any percentage rate tender containing item-wise rates and any item rate tender containing percentage rate below or above

estimatedscheduled rates will be summarily rejected

12 The Conditions of Contract shall govern sales tax or any other tax on materials or Income Tax in respect of the contract

Deduction of Income Tax at source will be made as per provisions of the Income Tax Act in force from time to time

13 If on check there are differences between the rate quoted by the Contractor in words and figures or in the amount worked out

by him the following procedure shall be followed -

(i) Where there is a difference between the rates in figures and words lower of the two rates shall be taken as valid and correct

rate

(ii) When the rate quoted by the contractor in figures and in words tallies but the amount is not worked out correctly the rate

quoted by the contractor shall be taken as correct and not the amount worked out

(iii) While quoting rates if raterates against any item or items are found to be omitted the rate given in the Schedule G by the

Department for such items will be taken into account while preparing comparative statement and contractor shall be bound to

execute such item on G Schedule rates

(iv) In case where percentage is given but the above or below not scored the tender will be non-responsive

14 The Contractor shall read the specifications and study the working drawings carefully before submitting the tender

15 After acceptance of the tender the Contractor or all partners (in the case of partnership firm) will append photographs and

signatures duly attested at the time of execution of agreement

16 Experience into similar nature of works for which tender invited and fulfill conditions of NIT

17 Contractors shall submit only unconditional tenders Conditional tenders are liable to be rejected similarly

Signature of Contractor

General Manager-Works

10

SPECIAL CONDITIONS OF CONTRACT

1 The Technical bid will be opened first on the day mentioned in the NIT Bidders will be evaluated as per norms set for

qualification in Technical bid and Financial bids of only those bidders will be opened which were qualify in the technical bid

2 Contractors bidding for the work should be reputed experienced contractors fulfilling the requirements laid down in the NIT

and well versed and working in the field Only those bidders will be considered qualified in the Technical bid who have

executed similar works to the tune of at least 13rd of the estimated value of the work (published in NIT) during last five

years (updated to current price level 100 per annum) and have the necessary technical expertise and support

machinery and administrative and financial capability to satisfactorily execute works in question for which they are bidding

3 The decision of the General Manager-works RTDC Ltd Jaipur or his representative on pre-qualification in the Technical bid

will be final amp binding

4 All raw materials will have to be brought to the site and all carving work will have to be executed only at site to qualify for

payment of running bills No payment of any material at or work done at place other than the site of work will be made

unless such material is brought to site and found acceptable to be used on the work

5 General conditions of contract special conditions of contract and specification of work as appended herewith in addition to

General condition of agreement will be applicable on this work In addition the PWD specifications will also be applicable

as relevant to the particular item of work

6 Work shall be carried out as per approved drawings and designs to be provided by the departmental architect engaged

7 Architectural work for the construction shall be of a high standard quality and pattern (class and style) to match the existing

work

8 All work shall be carried out as per approved samples of each element

9 The exposed surface of stonework will be suitably protected from damage disfigurement during the course of work and will

be cleaned and washed removing all spots etc for final acceptance on completion

10 All scaffolding shuttering TampP etc for the work shall have to be arranged by contractor at his own cost

11 The time for completion of work as given in the NIT shall be strictly adhered to and the work so planned as to be completed

within the scheduled period The contractor shall provide with a time schedule to the department for progressing with and

completing various stages of the work

12 Only best quality stone and other building materials shall be used in construction and all such material will be got approved

from the Engineer in-charge before use

13 Quantities of individual items can be increased invariably or even reduced withdrawn and specification and designs altered

at the discretion of Engineer in-charge and contractor will not be entitled to any compensation thereof for such alteration For

extra items if any rates will be decided based on market analysis to be provided by contractor

14 Contractor will give notice before any work is covered up Bad work will have to be redonereplaced at contractors cost

15 Full scale drawings form work for architectural stone work to be developed from drawings wherever necessary shall be got

prepared by contractor for prior approval before Signature of contractor

construction at his own cost and he will get these approved from the Engineer in-charge General Manager-Works RTDC

Ltd Jaipur who shall however be at liberty to modify such drawings form work and no extra payment shall be made for this

16 It will be the contractors responsibility to get the drawings formwork and sample of individual itemselements of work

approved from the departmental Architect Engineer before proceeding with manufacture of the same at site

17 The contractor shall provide adequate safety measures and proper insurance for his labour working at site and it shall be

done by contractor at his end Contractor shall settle all labour disputes at his own level The contractor shall observe all

labourfactory laws in force

18 Security deposit will be recovered from each running bill of contractor as per provisions of PWFampAR Earnest money will be

adjusted in the security deposit amount Security deposit shall be returned after one year satisfactory completion of the work

and on satisfactory performance of structure

19 No escalation will be payable even if the completion period exceeds that as stipulated

20 In case of unsatisfactory work by contractor or deliberate delaying the work without valid reasons the contract will be liable

to be terminated at the stage up to which acceptable work is done and paid for with no compensation of any sort payable to

contractor for withdrawal at that stage and possession of work executed at site will be taken over by Department In case of

any dispute the decision of the Department will be final and binding on the contractor

21 The bidder has to furnish with his technical bid (In prescribed Performarsquos Schedule 1-5)

Full information regarding financial resources and capability in Schedule-1 herewith(Photocopy to be made out of schedule)

a) Details of works of similar type and magnitude completed in last 5 years by the tenderer in Schedule II (Photocopy to be

made out of schedule)

b) Details of works bids and works to be completed in Schedule-III (Photocopy to be made out of schedule)

c) Details of technical supervisory personnel and master craftsman craftsman which he proposes to utilize for this work in

Schedule IV (Photocopy to be made out of schedule)

d) Details of plant and equipment proposed for use in the work in Schedule V (Photocopy to be made out of schedule)

11

e) The bidder should demonstrate that they have adequate financial resources (Over draft Credit Limit letter from bank)

Signature of Contractor

22 Bid capacity

(i) Bidders who meet the minimum qualifying criteria are to be evaluated further for Bid capacity as under -

(a) Maximum value of similar works executed in any one year during the last five years including current year (updated to the

current price level) extracted from schedule II which will take into account the completed and on going works

(b) Value of the existing commitments works (complete or partial) to be completed in the coming 12 months (up dated to the

current price level) Extracted from schedule III

(ii) Bid Capacity=(AxNx3-B) where

A=Maximum value of works executed in any one year during the last five years (updated to present price level) taking into

account the completed as well as works in progress

N=Number of years prescribed for completion of the works for which bids are invited herein (in years)

B=Value at present price level of existing commitments and on going works (at hand) to be executed during N period

The bidder will be post qualified only if his bid capacity is equal or more than the cost of work in question No contract may be

awarded to bidder lacking the financial and technical resources to undertake the work The decision of General Manager

(Works) Rajasthan Tourism Development Corporation Ltd Jaipur in this regard will be final and binding

NOTE -The present price level for turn over cost of completed works and amount of similar nature works (of a value at least 13rd of the estimated value of the work published in NIT during last five years) the previous years value shall be given weightage of 10 per year as following for the tendersbids invited by this department ndash

(a) For last year - 100 (b) For one year before - 110 (c) For two year before - 121 (d) For three year before - 133 (e) For four year before - 146

For current year the price level shall be 10

23 The right to qualify or not to qualify any or all the bidders without assigning any reason is reserved with the General Manager

(Works) Rajasthan Tourism Development Corporation Ltd Jaipur

24 Determination of Responsiveness

a) Prior to the detailed evaluation of bids the General Manager (Works) Rajasthan Tourism Development Corporation Ltd

JAIPUR will determine whether each bid is substantially responsive to the requirements of the bidding documents

b) For the purpose of this clause a substantially responsive bid is one which has required capacity capability and financial

resources and whose bid conforms to all the terms conditions and specifications of the bidding documents without

material deviation or reservation A material deviation or reservation is one which affects in any substantial way the

scope quality or performance of the works or which limits in any substantial way the General Manager (Works)

Rajasthan Tourism Development Corporation Ltd JAIPURrsquoS right or the Bidders obligations under the contract and the

rectification of which deviation or reservation would effect unfairly the competitive position of other bidders presenting

substantially responsive bids

c) if a bid is not substantially responsive to the requirements of the bidding documents it will be rejected and may not

subsequently be made responsive by the bidder having corrected or withdrawn the nonconforming deviation or

reservation

25 Construction programme ndash

1) Within the time stated in this contract the Contractor shall after the acceptance of his tender submit to the General Manager

(Works) Rajasthan Tourism Development Corporation Ltd JAIPUR for approval programme together with bar chart PERT

chart

2) proposed deployment of machinery etc showing the order of procedure in which he proposes to carryout the works The

contractor shall provide in writing general description the arrangements deployment of equipment work planning and

methods which he proposes to adopt for the execution of the works

3) If at any time it should appear to the Department that actual progress of the work does not conform to the approved

programme referred to in sub-clause (1) of this clause the Contractor shall produce at the request of the Department a

revised programme showing the modifications to the approved programme necessary to ensure completion of the works

within the time for completion

4) The submission to and approval by the Department of such programmers or the furnishing of such particulars shall not

relieve the contractor of any of his duties or responsibilities under the contract

5) The contractor shall submit within 30 days after the date of notice to proceed with the work a detailed construction

programme to suit the programme of completion for the entire contract period This programme shall be reviewed and

revised every half year at the beginning of the working season to plan timely action for making up the slippages occurred in

the previous season to suit the stipulated period of completion (including mile stones) as extended from time to time

26 Materials workmanship period and certificates of Maintenance and Defect Liability etc

All materials and workmanship shall be of the respective kinds described in the contract and in accordance with the

ArchitectsEngineer instructions and shall be subjected from time to time to such tests as the Engineer may direct at the

place of manufacture or fabrication or on the site or at such other place or places as may be specified in the Contract or at

all or any of such places The contractor shall install quality control laboratory and provide such assistance instruments

machines labour and materials as are normally required for examining measuring and test in any work and the quality

weight or quantity of any material used and shall supply samples of materials before incorporation in the works for testing as

may be selected and required by the Engineer-in-charge

12

Signature of Contractor

27 Period of maintenance and Defects liability

The Contractor shall be responsible to make good within such period as maybe stipulated by the Engineer in-charge any

defect which may develop or may be noticed during period of maintenance of 12 months from the certified date of

completion and which is attributable to the contractor All notice of such defect shall be given to the Contractor promptly In

case the contractor fails to make good the defects the Engineer in-charge may employ other persons to make good such

defects and all expenses consequent thereof and incidental thereto shall be recoverable from the Contractor In the event

the employer takes over portions of work as they are completed the liability of the contractor under this clause for these

portions shall extend to a period of 24 months from the actual dates on which portions of the works are taken over

28 The successful biddercontractor is required to undertake detailed photo recording documentation by still photography

videography of the entire work prior to commencement and the same has to be deposited with the Engineer in charge of

RAJASTHAN TOURISM DEVELOPMENT CORPORATION JAIPUR in two copies immediately Before dismantling any old

work to redo this still photography with specifically putting some identity mark number of the portion by any specified means

has to be done and this to be got checked and certified by Engineer In charge and recorded specifically in the measurement

book (MB) A written permission from the Engineer in charge before commencement of executing such work is essential for

execution as well as for payments

During the work in progress and after its completion also photo documentation is necessary and the photos before amp after

completion of portion of work are essentially to be enclosed with the bill for payment

Signature of Contractor

GENERAL MANAGER (WORKS)

13

SCHEDULE-I

FINANCIAL RESOURCES AND CAPABILITY

(PURSUANT TO CLAUSE 26) 1 Name of Applicant

2 Name of Partner Director

3 Capital

(a) Authorised

(b) ii

4 (a) WhetheCategory of Enlisted in Govt

(b) Details Details of the work completed and applicants performance record for last five years

(information to be furnished in Schedule II in India

(c) Details of works in hand applicants performance record for last five years (Information to be

furnished in Schedule-III)

5 Furnish Balance Sheet and profit and loss statement with auditorrsquos report for the last three years

6 The information on the following aspects should be specifically furnished

(i) Working capital and net worth

(ii) Turnover for the years

a

b

c

(iii) Gross income in years in India

(i)

(ii)

(iii)

(iv) Quick ratio or acid test ration (Quick assets to current liabilities)

7 What is the maximum annual turnover of the project that you can handle (Financial Projection)

8 Have you ever been denied tendering facilities by any Governmental DepartmentPublic Sector

undertaking

(If yes Please give details)

9 List of your source of finance

10 Certificate of financial soundness by Bank

11 Name and address of Bank from whom reference can be obtained

12 Have you ever been declared bankrupt

(if yes please give details)

Signature of Contractor

14

SCHEDULE-II WORKS OF SIMILAR MAGNITUDE TO THE WORK UNDER CONSIDERATION COMPLETED BY THE

APPLICANT IN LAST FIVE YEARS IN INDIA

(Pursuant to Clause 26)

SNo Na

me

of

wor

k

Place

amp

State

Tender

awardi

ng

Agency

Tender

ed Cost

Stipulate

d time of

Completi

on

Time in

which

complete

d

Date

of

comp

letion

Reason

for

Delay

Principal

features

of work

done

Value of

work done

1 2 3 4 5 6 7 8 9 10 11

Year

Year

Year

Signature of Contractor

15

SCHEDULE-III WORKS TENDERED FOR amp WORKS TO BE COMPLETED AS ON THE DATE OF SUBMISSION OF

APPLICATION IN INDIA

(pursuant Clause 26)

SNo Name

of

work

Place

amp

State

Work on Hand Work tendered for

Tender

Cost amp

Date

or

award

Stipulated

period of

Completion

Cost of

work

remaining

to be

executed

Antici

pated

Date

of

compl

eted

Estimate

d cost

(Rs In

Lakh)

Date

when

decisio

n

expecte

d

Stipulate

d Date

period of

Completi

on

Remar

ks

1 2 3 4 5 6 7 8 9 10 11

Year

Year

Year

Signature of Contractor

16

SCHEDULE- IV

Details of Key Personnel intended to be employed for this work

(use separate sheet if necessary)

(Pursuant to clause 26)

S No Name of Person Qualification Designation Experience Work to be

put on

A Technical Personnel

(1)

(2)

(3)

(4)

B Administrative Personnel

(1)

(2)

(3)

(4)

C Master Craftsmen

(1)

(2)

(3)

(4)

D Craftsmen

(1)

(2)

(3)

(4)

E Any other (1)

(2)

(3)

(4)

Signature of Contractor

17

SCHEDULE- V

DETAILS OF MAJOR ITEMS OF CONSTRUCTION PLANT AVAILABLE FOR THIS WORK

S No

Particulars Make Year of manufacture

Nos Whether owned or confirmed lease

1 Lime mortar Mill

2 Scaffolding Material

3 Movable Gantry

Crane etc

4 Any other TampP for

the purpose

5

6

7

8

Signature of Contractor

18

RAJASTHAN TOURISM DEVELOPMENT CORPORATION LIMITED JAIPUR

(WORKS DIVISION)

TENDER DOCUMENT (Financial Bid)

E-Tender (NIT No) 082016-17

Name of work- Pushkar Market Street- Restoration And Development Works

Restoration Conservation work Stained GssMirror

Signature of Contractor

19

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works

(Based on PWD BSR CIVILElectrical Ajmer Circle - 2013 and item rates)

SCHEDULE -G

GENERAL ABSTRACT

SNO WORK AMOUNT

1

PART A- CIVIL WORKS BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

304610000

2

PART B- SANITARY WORKS BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

5936400

3

PART C- HORTICULTURE BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

2627500

4

PART D-NON BSR ITEMS ( CIVIL AND ELECTRICAL)

GRAND TOTAL

I we hereby agree to execute the work PART A In figures Above Below In words

Above below PART B In figures Above Below In words

Above below PART C In figures Above Below In words

Above below PART D In figures Above Below In words

Above below

General Manager Works

RTDC Ltd Jaipur

Signature of the Contractor With Full Postal Address

20

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works

(Based on PWD BSR Civil Ajmer Circle - 2013)

PART A- CIVIL WORKS

SL No Specification Unit Rate QTY Amount

1

Surface Dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr and lift up to 15 Mtr All kinds of soil 100Sqm 437

26

11362

2

Surface Dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr and lift up to 15 Mtr All kinds of soil Cum 127

30

3810

3

Filling available excavated earth (excluding rock) in trenches plinth side of foundation etc in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift Cum 61

12 732

4

Providing and laying in position cement concrete including curing compaction etc complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level

M15 grade Nominal Mix (with graded stone aggregate 20mm nominal size) Cum

3438

230

790740

5

Random Rubble stone masonry for foundation and plinth in Cement Sand mortar above 30 CM thick wall in

21

Cement Mortar 13 ( 1-Cement 3-Sand) Cum

2193

35

76755

6

Random Rubble stone masonry for superstructure above plinth level one storey height above 30cm thick walls in

Cement Mortar 13 ( 1-Cement 3-Sand) Cum

2686

135

362610

7

Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor three level including curing compaction finishing with rendering in cement sand mortar 13 (1 cement 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement for -

Beams suspended floors roofs griders having slopes up to 15ordm landings balconies shelves chajjas lintels bands plain windows sills staircases and spiral staircases etc

M20 grade Nominal Mix

Cum 5138

45

231210

8

Centering amp shuttering with plywood or steel sheets including strutting propping bracing both ways with wooden members and removal of formwork for upto floor three level for

Suspended floors roofs landings staircases balconies girders cantilevers bands coping bed plates anchor blocks sills chhajjas lintel beam etc Sqm 222

60

13320

9

Providing and fabricating reinforcement using steel of SAILVIZAK-RINLTATA TISCONESSARZINDAL VIJAINAGAR IS 1786-1986 for RCC work including straightening cutting bending placing in position and binding (including cost of binding wire) all complete up to floor three level

22

Thermo-Mechanically Treated bars (Conforming of relevent IS code) Kg 78

2630

205140

10

Plaster on new surface on wall in cement sand mortar 13 including racking of joints etc complete fine finish

20mm thick Sqm 161

150

24150

11

6mm thick cement plaster to ceiling of mix 13 (1cement 3 fine sand) Sqm 105

25

2625

12

Polished Blue Kota Stone flooring skirting laid over 20mm thick base of CM 14 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete

13

For area of each slab from 2001 to 5000 SqCm

30mm thick slab

Sqm 988

35

34580

14

Wall Painting with plastic emulsion paint of approved brand and manufacture to give an even shade

Two or more coats on new work including preparation of base with primer putty lippy complete in all respect Sqm 82

76

6232

15

Applying Exterior Emulsion Paint like ACE APEX or equivalent brand and manufacture of required shade to give an even shade including all scaffolding on prepared surface (excluding water primer)

New Work (Two or more coats) Sqm 119

28

3332

16

Applying one coat of Asian Paints DECO Primer (Water thinnable) of approved brand amp manufacture ic scrapping by sand papering and preparing the even surface on wallwall putty as base for ACE APEX or APEX ULTIMA ic all scaffolding(New Surface) Sqm 24

104

2496

23

17

providing and fixing steel gategrating and grills made of anglesteessqure bars flats or blackpipe with holdfast and fitting complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide kg 83

1250

103750

Demolishing cement concrete including disposal of material with in 50 meter lead

136 or richer mix Cum 319

30

9570

148 or leaner mix Cum 311

20

6220

18

Demolishing RCC work manually by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge

Cum 1085

30

32550

19

Rough chisel dressed stone flooring over 20mm (Av) thick base in CM 16 including pointing with cement mortar 12 (1 cement 2 stone dust) with and admixture of pigment to match the shade of stone with joint thickness upto 15mm

45mm thick red sand stone

Sqm 385

230

88550

20

Providing and fixing 1st quality standard white grey ivory fume red brown light green light blue and other light shades glazed tiles confirming to IS 13753 amp IS 15622 of size 300mm x 200mm in walls floors steps pillars etc laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar)

Catogary-A Kajaria Johnson Somani Orient make Sqm 763

25

19075

24

21

Applying one coat industrial grade bitumen of penetration 2585 of approved quality using 170 kg per Sqm on Damp Proof Coarse after cleaning the surface with brushes and finally with a piece of cloth slightly soaked in kerosene oil Sqm 103

45

4635

22

Providing and Fixing 30 too 40 mm thickk stone chajjas in cement sand mortar 14 including making gola at junction with wall concrete M-15 grade (124 nominal mix drip course

20 mm thick plastering in CM 16 on both Sqm 645

35

22575

23

Providing and fixing steel gate grating and grills made of angles tees square bars flatsor black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide

Kg 83

9750

809250

24

Extra if squarerectangular hollow tubelar sections are used or grill made by flats only

Kg

10

6490

64251

P amp F bolts including nuts and bolts complete

Kg 57

240

13680

25

Painting with ready mix paint of approved brand and manufacture in all shades to give an even shade

New Steel Work Sqm 40

1500

60000

Welding by electric plant cmlength 286

15000

42900

TOTAL OF BSR WORKS CIVIL

3046100

25

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - B- SANITARY WORKS

SL No Specification Unit Rate QTY Amount

1

P amp F GI Pipes (External Work) with GI Fittings excluding union (IS 1239 Mark) including trenching amp refilling earth etc

40mm dia nominal bore A Class

Mtr 338

32 10816

25mm dia nominal bore A Class

Mtr 182

48 8736

2

Making connection of GI distribution Branch with GI main including all Fitting

Beyond 25mm amp upto 100mm dia Each 332 8 2656

3

P amp F Sand ndashcast Floor Trap (Nahni) of (IS1729 mark) of approved qualitymake with socket down or hinged grating including cutting and making good the floor- 100 x 100mm Each

421

4 1684

4

P amp F Gun-metal Full-way Valve (IS778 Mark) or wheel valve of approved make

Gun metal 25mm nominal bore Each 702 4 2808

Gun metal 40mm nominal bore Each 1065 4 4260

5

P amp F PVC Storage Tank ISI Marked (IS 12701) indicating the BIS license No) of approved make with cover 25mm dia 1M long GI over-flow pipe amp 25 Cm long wash out pipe with plug amp socket including making connection etc complete of approved design

1000 litres capacity Each 5437 4 21748

6

P amp F push cock superior quality of approved make

CP brass 15 mm

Each 416

16 6656

TOTAL 5936400

26

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - C-HOTICULTURE WORKS

SL No Specification Unit Rate QTY Amount

1

Supply of dry manure including loading unloading transportation amp stacking at site

Goat dungmanure

Cum

50000

35

17500

2

Supply amp Stacking good earth at site complete including loading unloading amp transportation etc Cum

7500

55

4125

3

Supply of different varities of treeshrubsclimbers according to height and age of the plant at site including loadingunloading amp transportation etc complete

Different flowing plants 900mm to 1500mm Each

1500

115

1725

4

Supply of different varities of bougainvillea in poly bagsearthen pots according to height growth amp age of plant at site including loadingunloading amp transportation etc complete

Local variety of bougainvillea 600 mm to 900mm Each

1500

75

1125

5

Digging pits in ordinary soil amp refilling the same with the excavated earth mixed with manure in the ratio 21 by volume (2 parts of stacked volume of earth after reduction by 20 1 parts of stacked volume of manure after reduction by 8) flooding with water and dressing including removal of surplus earth Each

1000

150

1500

27

(Cost of manure or extra good earth if needed to be paid separately) pit dia 60 cm X 60 cm deep

6

Spreading of manure and good earth in required thickness (cost of manure and good earth to be paid separately) Cum

400

75

300

TOTAL OF HORTICULTURE WORKS

26275

28

SCHEDULE OF QUANTITIES

Name of work Pushkar Market Street- Restoration And Development Works

(Based on item rates)

PART - D- NON SOR WORKS

SL No

Specification Unit Rate to

be Quoted

QTY

Amount

1

Providing and fixing fine dressed sand stoneapproved stone JALIas per existing matching geometrical design including moulding work with fine finishing fixing with thambli by proper adhesive and white cement with pigment including making groove etc complete in all respect

(b) 50mm thick Sqm 45

2

Providing amp fixing ashlar Rain water Spouts (3) lines dressed as per traditional practice existing design approved design size 60 x 30 x 25 cm fixing the rain water spout with lime surkhi mortar 12 with proper slope complete in all respect Each

12

3

Providing amp fixing ornamental stone cladding of approved sand stone with dressing complete as per existing designpatternapproved designfixing with 30mm thickgrinded lime surkhi mortar 12 amp pointing with white cement with araldite and pigment to match shade the stone complete in all respect as per direction of Engineer incharge(75mm thick) Sqm

54

4

Providing and fixing fine dressed sand stone Dasacoping as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect

(c) 75mm to 100mm thick with pan patti design Sqm 320

5

Providing and fixing fine dressed sand stone Cladding (Plain dressing only) as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect including removal of damaged cladding

(a) 50mm to 60mm thick Sqm 180

6

Supply and istallation whiteredapproved shade sandstone dustbin of size 800 mm x 450 mm and height 850 mm with hollow center to hang MS Dustbin of size 400mmx 500mmx 600 mm made of 1mm thick metal sheet fixed to stone pillars with MS chain edged with 50x50x5 mm angle sections including cutting welding and fabrication with priming coat of red oxide and approved ready mix paint of approved shadeStone peices joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 26

29

7

Supply and istallation of RedWhiteapproved shade stone bench of size 1500mmx450mmx450 mm horizontal stone members of size 300mmx400mmx450mm on two sides supporting the horizontal seating stone of 150 mm thickness fixed to vertical stone members joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 35

8

Poviding fixing testing and commisioning of Stainless Steel body bull Storage Capacity in (litres) 150 bull Nominal Cooling Capacity (Litreshr) 150 bull No Of Faucets 2 bull Dimensions 820W x 700D x 1235 H bull Normal Demand (glasses hr) 750 bull Refrigerant R-22 bull Current (Amps) 749 bull Water Overflow (Connections) 12 BSP bull Type Of Compressor Rotary Model No- SDLX15150A make Blue star or similar in make of VoltasOasis

Each 4

9

Providing fixing testing and commissioning of water purification system having auto shut-off e-boiling Voltage Stabilizer bull Type of Treatment- sediment filter active carbon cartridge mineral guard UV chamber bull water flow rate 3ltrminbull ultra- violet lamp of 16 watts bull power rating of 35watt bull Dimensions 355H x 1025D x 307WModel ndash Hi fio Make Eureka Forbes- aquagard or similar in make of livpurekent

Each 4

10

Demolishion of the existing bituminous road surface to a depth of 150 mm and disposal of demolished material with a lift upto 3 m and lead upto 1000 m

Sqm 50

11

Providing and fixing fine dressed sand stone flooring with white sand stone (Bansh paharpurdholpur stone) (panji marked surface) machine cut of approved shade set in pattern over 30mm thick base in cement mortar 16 including pointing with cement mortar 12 (1 cement2 stone dust) mixed with pigment to match the shade of stone with joint thickness upto 5 mm as per existing flloringsample approved by the consultantapproved by (75mm thick)

Sqm 730

12

Providing and Fixing Cobbles stone of lime sand stone size 100X100MM and theakness of 70 to100mm on path way open court yards of color shade approved by the consultant over cement mortar 13 ( 1 cement3 course sand) keeping 10mm joint between cobbles filled with cement mortar 13 ( 1 cement3 course sand) the mortar should remain recessed by 5mm from the top surface of the cobble stone complete in all respects as per design and details provided by the consultant

Sqm 1650

13

Supply and installation of sanstone signage 450x200 mm of redwhiteapproved shade Sandstone 75 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete with fixing with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 6

30

14

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 450mmx2400mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved with ornamentation in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

15

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 650mmx1200mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

16

Heritage signage shall be etched on to Dulmera stone plaque of size 18m x 14m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 4

17

Signage shall be etched on to Dulmera stone plaque of size 18m x 10m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 12

18

Providing and fixing MS steel sheets 3 mm thickness on to MS anfgles flats tees and hollow sections with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Kg 10640

19

Providing and fixing MS perforated sheets 3 mm thickness with diamondround shaped perforations as per sample approved by the consultant with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Sqm 90

20

Painting of shop signages with lettering in hindienglish and ornamental design patterns in ready mix paint of approved brand and manfacture in all shades to give an even shade as per drawings and details provided by the consultant

Sqm 560

21

Flush pointing over joints of dressed stone cladding chajjas jali etc with neat cement sand amp colour including racking the joints as per Jodhpur practice including all leads and lifts with grinded mortar of lime putty and stone powder mixed in 11 ratio and gur methi gugal etc are to be mixed as per old traditional practice

Sqm 75

22

Khamira Colour Washing as per old traditional practice to prepare the Khamira the lime should be slaked at least for 7-10 days and regularly it should be stirred by adding cured Gugal for non-synthetic colour adding gum (babool gum) as per specificationThen applying prepared solution on walls three to four thin coats as desired finishing

Sqm 1750

31

23

Providing amp applying Lime kara 12 (1lime cream 2 Zikki powder) grinding mortar with grinding millmanually on lime baseon all flat surface in two coatsFirst coat applying 3mm to 4mm thick and curing properly at least 7 dayssecond finishing coat done after 7days of previous coat as per traditional practice(thickness not more than 6 mm)

Sqm 155

TOTAL OF NON SOR WORKS

6

UNDERTAKING

THE GENERAL MANAGER ndashWORKS RTDCLTD JAIPUR

Dear Sir

Having examined and understood terms amp conditions the plans specifications and Schedule of

Quantities for the work prepared by your Architects Engineers IWe hereby offer to execute the work at the

rates which IWe have quoted for respective items specified IWe herewith enclose myOur DD no------------

----------dated---------------Name of bank-----------------------------------------------------------for Rs

as earnest money for execution at myour tendered rates

In the event of this Tender being accepted IWe agree to enter into agreement as amp when required

to execute the work

Yours Faithfully

CONTRACTOR (Name amp Full address with seal)

7

MEMORANDUM IWe hereby tender for execution for the work within time specified and rates entered in the schedule G in all respects in accordance with the specifications designs drawings and instructions in writing referred to herein and in the annexed conditions with such materials as are provided for by and in all other respects in accordance with such conditions so far as applicable IWe have visited the site of work amp IWe amare fully aware of all the difficulties amp conditions likely to effect carrying out of the work IWe have fully acquainted myselfourselves about the conditions in regard to accessibility of site and quarrieskilns nature and the extent of ground working conditions including stacking of material installation of TampP conditions affecting accommodation and movement of labour etc required for the satisfactory execution of this contract (a) Name of work (b) Estimated Cost (in figures) Rs

(in words) Rs

(c) Earnest Money Rs (d) Security Deposit (Including Earnest Money) Rs NOTE (1) Security deposit to be 10 in the form of cash or deduction to be made from running bills (2) Time allowed for the work to be reckoned from the 10

th day after the date of written order to

commence the work Should this tender be accepted in whole or in part IWe hereby agree to abide-by and fulfill all terms and provisions of the conditions of contract annexed hereto and in the NIT or in default thereof to forfeit and pay to the General Manager (Works) Jaipur the sum of money mentioned in the said conditions A sum of Rs is enclosed herewith as earnest money This amount of earnest money shall absolutely be forfeited to Department without prejudice to any other right or remedies should IWe fail to commence the work specified in the above memorandum or should IWe not furnish performance guarantee in cash or in form or Bank guarantee at the time of execution of agreement specified in the above memorandum in accordance with the said conditions of contract

Signature of Contractor The above tender is hereby accepted by me

General Manager-Works

RTDCLTD JAIPUR

8

DIRECTIONS FOR GUIDANCE OF CONTRACTORS

1 All works proposed for execution by contract will be notified in a form of invitation to tender pasted on a board hung up in the

office and signed by General Manager-Works RTDC LTD Jaipur or duly authorized officer

The form of invitation to tender will state the work to be carried out as well as the date of submitting and opening of tenders

amp the time allowed for carrying out the work also the amount of earnest money to be deposited with the tender and the

amount of security deposit to be deposited by the successful tenderer and the percentage as per PWFampAR Govt of

Rajasthan to be deducted from the bills copies of the specifications designs and drawing and estimated ratesscheduled

rates and any other documents required in connection with the work for the purpose of identification by the Rajasthan

Tourism Development Corpn Jaipur Drawings shall also be open for inspection by the contractor at the office of the General

Manager9 Works) Rajasthan Tourism Development Corporation Ltd Jaipur or duly authorized Engineer during office hours

2 In the event of the tender being submitted by a firm it must be signed separately by each partner thereof or in the event of

the absence of any partner it must be signed on his behalf by a person holding power of attorney authorizing him to do so

3 Receipt for payment made on account of a work when executed by a firm must also be signed by the several partners

except where the contractor are described in their tender as a firm in which case the receipt must be signed in the name of

the firm by one of the partners or by some other person having to give effectual receipts for the firm

4 Any person who submits tender shall fill up the usual printed form stating at how much percent above or below the rates

specified or on item rates he is willing to undertake the work Tenders which propose any alteration in the work specified in

the said form of invitation to tender or in the time allowed for carrying out the work or which contain any other conditions of

any sort will be liable to rejection No single tender shall include more than one work but person who wish to tender for two

or more works shall submit a separate tender for each work Tender shall have the name and number of the work to which

they refer written outside the envelope

5 The General Manager-Works RTDC Ltd Jaipur or other duly authorized Engineer will open the tenders in the presence of

any intending contractors or their authorized representative who may be present at the time and will enter the amounts of the

several tenders in the Register of tenders in the event of the tender being accepted A receipt for the earnest money

forwarded therein shall there upon be given to the contractor who shall there-upon for the purpose of identification sign

copies of the specifications and other documents In the event of a tender being rejected the earnest money forwarded with

such unaccepted tender shall be returned to the contractor

6 The General Manager-Works RTDC Ltd Jaipur or other authorized Engineer shall have the right of rejecting all or any of

the tenders without assigning any reasons

7 The accompanying schedules of quantities in ldquoGrdquo Schedule are the architects estimated quantities for the work The

contractors shall attach histheir OWN prices for the each item in column for rates left blank and shall money out the same in

the final column amp totals HeThey shall fill up properly the form of tender and the schedule of quantities without adding any

stipulations thereto The tender shall show the total amount arrived at in the manner above described The tender Notice to

Contractors conditions of contract Specifications and the Schedule of quantities and rates etc shall all be embodied in and

shall form a part of the contract

8 The quantities contained in the Schedule are only approximately correct If more or less quantities are actually done on the

work the contractors shall be paid for the same at the rates tendered by himthem in the Schedule of Rates The work as

actually done will be measured by the contractors qualified engineer and bill furnished to the General Manager(Works)

RTDC Ltd Jaipur which in turn will get it checked by the Engineer in charge time to time and will be paid for as provided in

the Special Condition of Contract after deducting SD as per PWFampAR provisions

Signature of Contractor

9

GENERAL CONDITIONS OF CONTRACT 1 All the materials used shall be of approved quality and to the entire satisfaction of the General Manager-works RTDC Ltd

Jaipur

2 The General Manager-works RTDC Ltd Jaipur or the Engineer in charge reserves right for any additions and alternations or

omission in the tender and execution of works In case the Department supplies the material specified in the tender recovery for

the cost of supplied material from subsequent running Bill will be made

3 The Department shall pay to the contractor as detailed in special conditions of contract

4 The contractors isare to set out the work in accordance with the plans All lines to be accurately marked or otherwise to the

satisfaction of the Engineer in charge

5 The contractors shall meet the Engineer in charge or his representative at the works site whenever required

6 The contractors shall maintain and be represented on site at all times by a responsible and efficient EngineerArchitect who

thoroughly understands all the trades enrolled The Engineer in charge reserves the right to dismiss the Foremen and any

workmen who in his opinions are not sufficiently skilled or who neglect or refuse to obey instructions

7 The contractors shall be given one set of the plans free of charge

8 The General Manager-works RTDC Ltd Jaipur reserves the right of altering the drawings and nature of the work and adding

to or omitting any item of work or having portions of the same carried out departmentally or otherwise and such alterations or

variations shall be carried out without prejudice to the contract

9 The General Manager-works RTDC Ltd Jaipur reserves to the right to increase or decrease quantity of work or omit some part

of the work without violating the contract and for which he will not be held liable to compensation to the contractors

10 All plants machines and other equipments are to be arranged by contractor for the work

11 Any percentage rate tender containing item-wise rates and any item rate tender containing percentage rate below or above

estimatedscheduled rates will be summarily rejected

12 The Conditions of Contract shall govern sales tax or any other tax on materials or Income Tax in respect of the contract

Deduction of Income Tax at source will be made as per provisions of the Income Tax Act in force from time to time

13 If on check there are differences between the rate quoted by the Contractor in words and figures or in the amount worked out

by him the following procedure shall be followed -

(i) Where there is a difference between the rates in figures and words lower of the two rates shall be taken as valid and correct

rate

(ii) When the rate quoted by the contractor in figures and in words tallies but the amount is not worked out correctly the rate

quoted by the contractor shall be taken as correct and not the amount worked out

(iii) While quoting rates if raterates against any item or items are found to be omitted the rate given in the Schedule G by the

Department for such items will be taken into account while preparing comparative statement and contractor shall be bound to

execute such item on G Schedule rates

(iv) In case where percentage is given but the above or below not scored the tender will be non-responsive

14 The Contractor shall read the specifications and study the working drawings carefully before submitting the tender

15 After acceptance of the tender the Contractor or all partners (in the case of partnership firm) will append photographs and

signatures duly attested at the time of execution of agreement

16 Experience into similar nature of works for which tender invited and fulfill conditions of NIT

17 Contractors shall submit only unconditional tenders Conditional tenders are liable to be rejected similarly

Signature of Contractor

General Manager-Works

10

SPECIAL CONDITIONS OF CONTRACT

1 The Technical bid will be opened first on the day mentioned in the NIT Bidders will be evaluated as per norms set for

qualification in Technical bid and Financial bids of only those bidders will be opened which were qualify in the technical bid

2 Contractors bidding for the work should be reputed experienced contractors fulfilling the requirements laid down in the NIT

and well versed and working in the field Only those bidders will be considered qualified in the Technical bid who have

executed similar works to the tune of at least 13rd of the estimated value of the work (published in NIT) during last five

years (updated to current price level 100 per annum) and have the necessary technical expertise and support

machinery and administrative and financial capability to satisfactorily execute works in question for which they are bidding

3 The decision of the General Manager-works RTDC Ltd Jaipur or his representative on pre-qualification in the Technical bid

will be final amp binding

4 All raw materials will have to be brought to the site and all carving work will have to be executed only at site to qualify for

payment of running bills No payment of any material at or work done at place other than the site of work will be made

unless such material is brought to site and found acceptable to be used on the work

5 General conditions of contract special conditions of contract and specification of work as appended herewith in addition to

General condition of agreement will be applicable on this work In addition the PWD specifications will also be applicable

as relevant to the particular item of work

6 Work shall be carried out as per approved drawings and designs to be provided by the departmental architect engaged

7 Architectural work for the construction shall be of a high standard quality and pattern (class and style) to match the existing

work

8 All work shall be carried out as per approved samples of each element

9 The exposed surface of stonework will be suitably protected from damage disfigurement during the course of work and will

be cleaned and washed removing all spots etc for final acceptance on completion

10 All scaffolding shuttering TampP etc for the work shall have to be arranged by contractor at his own cost

11 The time for completion of work as given in the NIT shall be strictly adhered to and the work so planned as to be completed

within the scheduled period The contractor shall provide with a time schedule to the department for progressing with and

completing various stages of the work

12 Only best quality stone and other building materials shall be used in construction and all such material will be got approved

from the Engineer in-charge before use

13 Quantities of individual items can be increased invariably or even reduced withdrawn and specification and designs altered

at the discretion of Engineer in-charge and contractor will not be entitled to any compensation thereof for such alteration For

extra items if any rates will be decided based on market analysis to be provided by contractor

14 Contractor will give notice before any work is covered up Bad work will have to be redonereplaced at contractors cost

15 Full scale drawings form work for architectural stone work to be developed from drawings wherever necessary shall be got

prepared by contractor for prior approval before Signature of contractor

construction at his own cost and he will get these approved from the Engineer in-charge General Manager-Works RTDC

Ltd Jaipur who shall however be at liberty to modify such drawings form work and no extra payment shall be made for this

16 It will be the contractors responsibility to get the drawings formwork and sample of individual itemselements of work

approved from the departmental Architect Engineer before proceeding with manufacture of the same at site

17 The contractor shall provide adequate safety measures and proper insurance for his labour working at site and it shall be

done by contractor at his end Contractor shall settle all labour disputes at his own level The contractor shall observe all

labourfactory laws in force

18 Security deposit will be recovered from each running bill of contractor as per provisions of PWFampAR Earnest money will be

adjusted in the security deposit amount Security deposit shall be returned after one year satisfactory completion of the work

and on satisfactory performance of structure

19 No escalation will be payable even if the completion period exceeds that as stipulated

20 In case of unsatisfactory work by contractor or deliberate delaying the work without valid reasons the contract will be liable

to be terminated at the stage up to which acceptable work is done and paid for with no compensation of any sort payable to

contractor for withdrawal at that stage and possession of work executed at site will be taken over by Department In case of

any dispute the decision of the Department will be final and binding on the contractor

21 The bidder has to furnish with his technical bid (In prescribed Performarsquos Schedule 1-5)

Full information regarding financial resources and capability in Schedule-1 herewith(Photocopy to be made out of schedule)

a) Details of works of similar type and magnitude completed in last 5 years by the tenderer in Schedule II (Photocopy to be

made out of schedule)

b) Details of works bids and works to be completed in Schedule-III (Photocopy to be made out of schedule)

c) Details of technical supervisory personnel and master craftsman craftsman which he proposes to utilize for this work in

Schedule IV (Photocopy to be made out of schedule)

d) Details of plant and equipment proposed for use in the work in Schedule V (Photocopy to be made out of schedule)

11

e) The bidder should demonstrate that they have adequate financial resources (Over draft Credit Limit letter from bank)

Signature of Contractor

22 Bid capacity

(i) Bidders who meet the minimum qualifying criteria are to be evaluated further for Bid capacity as under -

(a) Maximum value of similar works executed in any one year during the last five years including current year (updated to the

current price level) extracted from schedule II which will take into account the completed and on going works

(b) Value of the existing commitments works (complete or partial) to be completed in the coming 12 months (up dated to the

current price level) Extracted from schedule III

(ii) Bid Capacity=(AxNx3-B) where

A=Maximum value of works executed in any one year during the last five years (updated to present price level) taking into

account the completed as well as works in progress

N=Number of years prescribed for completion of the works for which bids are invited herein (in years)

B=Value at present price level of existing commitments and on going works (at hand) to be executed during N period

The bidder will be post qualified only if his bid capacity is equal or more than the cost of work in question No contract may be

awarded to bidder lacking the financial and technical resources to undertake the work The decision of General Manager

(Works) Rajasthan Tourism Development Corporation Ltd Jaipur in this regard will be final and binding

NOTE -The present price level for turn over cost of completed works and amount of similar nature works (of a value at least 13rd of the estimated value of the work published in NIT during last five years) the previous years value shall be given weightage of 10 per year as following for the tendersbids invited by this department ndash

(a) For last year - 100 (b) For one year before - 110 (c) For two year before - 121 (d) For three year before - 133 (e) For four year before - 146

For current year the price level shall be 10

23 The right to qualify or not to qualify any or all the bidders without assigning any reason is reserved with the General Manager

(Works) Rajasthan Tourism Development Corporation Ltd Jaipur

24 Determination of Responsiveness

a) Prior to the detailed evaluation of bids the General Manager (Works) Rajasthan Tourism Development Corporation Ltd

JAIPUR will determine whether each bid is substantially responsive to the requirements of the bidding documents

b) For the purpose of this clause a substantially responsive bid is one which has required capacity capability and financial

resources and whose bid conforms to all the terms conditions and specifications of the bidding documents without

material deviation or reservation A material deviation or reservation is one which affects in any substantial way the

scope quality or performance of the works or which limits in any substantial way the General Manager (Works)

Rajasthan Tourism Development Corporation Ltd JAIPURrsquoS right or the Bidders obligations under the contract and the

rectification of which deviation or reservation would effect unfairly the competitive position of other bidders presenting

substantially responsive bids

c) if a bid is not substantially responsive to the requirements of the bidding documents it will be rejected and may not

subsequently be made responsive by the bidder having corrected or withdrawn the nonconforming deviation or

reservation

25 Construction programme ndash

1) Within the time stated in this contract the Contractor shall after the acceptance of his tender submit to the General Manager

(Works) Rajasthan Tourism Development Corporation Ltd JAIPUR for approval programme together with bar chart PERT

chart

2) proposed deployment of machinery etc showing the order of procedure in which he proposes to carryout the works The

contractor shall provide in writing general description the arrangements deployment of equipment work planning and

methods which he proposes to adopt for the execution of the works

3) If at any time it should appear to the Department that actual progress of the work does not conform to the approved

programme referred to in sub-clause (1) of this clause the Contractor shall produce at the request of the Department a

revised programme showing the modifications to the approved programme necessary to ensure completion of the works

within the time for completion

4) The submission to and approval by the Department of such programmers or the furnishing of such particulars shall not

relieve the contractor of any of his duties or responsibilities under the contract

5) The contractor shall submit within 30 days after the date of notice to proceed with the work a detailed construction

programme to suit the programme of completion for the entire contract period This programme shall be reviewed and

revised every half year at the beginning of the working season to plan timely action for making up the slippages occurred in

the previous season to suit the stipulated period of completion (including mile stones) as extended from time to time

26 Materials workmanship period and certificates of Maintenance and Defect Liability etc

All materials and workmanship shall be of the respective kinds described in the contract and in accordance with the

ArchitectsEngineer instructions and shall be subjected from time to time to such tests as the Engineer may direct at the

place of manufacture or fabrication or on the site or at such other place or places as may be specified in the Contract or at

all or any of such places The contractor shall install quality control laboratory and provide such assistance instruments

machines labour and materials as are normally required for examining measuring and test in any work and the quality

weight or quantity of any material used and shall supply samples of materials before incorporation in the works for testing as

may be selected and required by the Engineer-in-charge

12

Signature of Contractor

27 Period of maintenance and Defects liability

The Contractor shall be responsible to make good within such period as maybe stipulated by the Engineer in-charge any

defect which may develop or may be noticed during period of maintenance of 12 months from the certified date of

completion and which is attributable to the contractor All notice of such defect shall be given to the Contractor promptly In

case the contractor fails to make good the defects the Engineer in-charge may employ other persons to make good such

defects and all expenses consequent thereof and incidental thereto shall be recoverable from the Contractor In the event

the employer takes over portions of work as they are completed the liability of the contractor under this clause for these

portions shall extend to a period of 24 months from the actual dates on which portions of the works are taken over

28 The successful biddercontractor is required to undertake detailed photo recording documentation by still photography

videography of the entire work prior to commencement and the same has to be deposited with the Engineer in charge of

RAJASTHAN TOURISM DEVELOPMENT CORPORATION JAIPUR in two copies immediately Before dismantling any old

work to redo this still photography with specifically putting some identity mark number of the portion by any specified means

has to be done and this to be got checked and certified by Engineer In charge and recorded specifically in the measurement

book (MB) A written permission from the Engineer in charge before commencement of executing such work is essential for

execution as well as for payments

During the work in progress and after its completion also photo documentation is necessary and the photos before amp after

completion of portion of work are essentially to be enclosed with the bill for payment

Signature of Contractor

GENERAL MANAGER (WORKS)

13

SCHEDULE-I

FINANCIAL RESOURCES AND CAPABILITY

(PURSUANT TO CLAUSE 26) 1 Name of Applicant

2 Name of Partner Director

3 Capital

(a) Authorised

(b) ii

4 (a) WhetheCategory of Enlisted in Govt

(b) Details Details of the work completed and applicants performance record for last five years

(information to be furnished in Schedule II in India

(c) Details of works in hand applicants performance record for last five years (Information to be

furnished in Schedule-III)

5 Furnish Balance Sheet and profit and loss statement with auditorrsquos report for the last three years

6 The information on the following aspects should be specifically furnished

(i) Working capital and net worth

(ii) Turnover for the years

a

b

c

(iii) Gross income in years in India

(i)

(ii)

(iii)

(iv) Quick ratio or acid test ration (Quick assets to current liabilities)

7 What is the maximum annual turnover of the project that you can handle (Financial Projection)

8 Have you ever been denied tendering facilities by any Governmental DepartmentPublic Sector

undertaking

(If yes Please give details)

9 List of your source of finance

10 Certificate of financial soundness by Bank

11 Name and address of Bank from whom reference can be obtained

12 Have you ever been declared bankrupt

(if yes please give details)

Signature of Contractor

14

SCHEDULE-II WORKS OF SIMILAR MAGNITUDE TO THE WORK UNDER CONSIDERATION COMPLETED BY THE

APPLICANT IN LAST FIVE YEARS IN INDIA

(Pursuant to Clause 26)

SNo Na

me

of

wor

k

Place

amp

State

Tender

awardi

ng

Agency

Tender

ed Cost

Stipulate

d time of

Completi

on

Time in

which

complete

d

Date

of

comp

letion

Reason

for

Delay

Principal

features

of work

done

Value of

work done

1 2 3 4 5 6 7 8 9 10 11

Year

Year

Year

Signature of Contractor

15

SCHEDULE-III WORKS TENDERED FOR amp WORKS TO BE COMPLETED AS ON THE DATE OF SUBMISSION OF

APPLICATION IN INDIA

(pursuant Clause 26)

SNo Name

of

work

Place

amp

State

Work on Hand Work tendered for

Tender

Cost amp

Date

or

award

Stipulated

period of

Completion

Cost of

work

remaining

to be

executed

Antici

pated

Date

of

compl

eted

Estimate

d cost

(Rs In

Lakh)

Date

when

decisio

n

expecte

d

Stipulate

d Date

period of

Completi

on

Remar

ks

1 2 3 4 5 6 7 8 9 10 11

Year

Year

Year

Signature of Contractor

16

SCHEDULE- IV

Details of Key Personnel intended to be employed for this work

(use separate sheet if necessary)

(Pursuant to clause 26)

S No Name of Person Qualification Designation Experience Work to be

put on

A Technical Personnel

(1)

(2)

(3)

(4)

B Administrative Personnel

(1)

(2)

(3)

(4)

C Master Craftsmen

(1)

(2)

(3)

(4)

D Craftsmen

(1)

(2)

(3)

(4)

E Any other (1)

(2)

(3)

(4)

Signature of Contractor

17

SCHEDULE- V

DETAILS OF MAJOR ITEMS OF CONSTRUCTION PLANT AVAILABLE FOR THIS WORK

S No

Particulars Make Year of manufacture

Nos Whether owned or confirmed lease

1 Lime mortar Mill

2 Scaffolding Material

3 Movable Gantry

Crane etc

4 Any other TampP for

the purpose

5

6

7

8

Signature of Contractor

18

RAJASTHAN TOURISM DEVELOPMENT CORPORATION LIMITED JAIPUR

(WORKS DIVISION)

TENDER DOCUMENT (Financial Bid)

E-Tender (NIT No) 082016-17

Name of work- Pushkar Market Street- Restoration And Development Works

Restoration Conservation work Stained GssMirror

Signature of Contractor

19

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works

(Based on PWD BSR CIVILElectrical Ajmer Circle - 2013 and item rates)

SCHEDULE -G

GENERAL ABSTRACT

SNO WORK AMOUNT

1

PART A- CIVIL WORKS BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

304610000

2

PART B- SANITARY WORKS BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

5936400

3

PART C- HORTICULTURE BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

2627500

4

PART D-NON BSR ITEMS ( CIVIL AND ELECTRICAL)

GRAND TOTAL

I we hereby agree to execute the work PART A In figures Above Below In words

Above below PART B In figures Above Below In words

Above below PART C In figures Above Below In words

Above below PART D In figures Above Below In words

Above below

General Manager Works

RTDC Ltd Jaipur

Signature of the Contractor With Full Postal Address

20

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works

(Based on PWD BSR Civil Ajmer Circle - 2013)

PART A- CIVIL WORKS

SL No Specification Unit Rate QTY Amount

1

Surface Dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr and lift up to 15 Mtr All kinds of soil 100Sqm 437

26

11362

2

Surface Dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr and lift up to 15 Mtr All kinds of soil Cum 127

30

3810

3

Filling available excavated earth (excluding rock) in trenches plinth side of foundation etc in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift Cum 61

12 732

4

Providing and laying in position cement concrete including curing compaction etc complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level

M15 grade Nominal Mix (with graded stone aggregate 20mm nominal size) Cum

3438

230

790740

5

Random Rubble stone masonry for foundation and plinth in Cement Sand mortar above 30 CM thick wall in

21

Cement Mortar 13 ( 1-Cement 3-Sand) Cum

2193

35

76755

6

Random Rubble stone masonry for superstructure above plinth level one storey height above 30cm thick walls in

Cement Mortar 13 ( 1-Cement 3-Sand) Cum

2686

135

362610

7

Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor three level including curing compaction finishing with rendering in cement sand mortar 13 (1 cement 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement for -

Beams suspended floors roofs griders having slopes up to 15ordm landings balconies shelves chajjas lintels bands plain windows sills staircases and spiral staircases etc

M20 grade Nominal Mix

Cum 5138

45

231210

8

Centering amp shuttering with plywood or steel sheets including strutting propping bracing both ways with wooden members and removal of formwork for upto floor three level for

Suspended floors roofs landings staircases balconies girders cantilevers bands coping bed plates anchor blocks sills chhajjas lintel beam etc Sqm 222

60

13320

9

Providing and fabricating reinforcement using steel of SAILVIZAK-RINLTATA TISCONESSARZINDAL VIJAINAGAR IS 1786-1986 for RCC work including straightening cutting bending placing in position and binding (including cost of binding wire) all complete up to floor three level

22

Thermo-Mechanically Treated bars (Conforming of relevent IS code) Kg 78

2630

205140

10

Plaster on new surface on wall in cement sand mortar 13 including racking of joints etc complete fine finish

20mm thick Sqm 161

150

24150

11

6mm thick cement plaster to ceiling of mix 13 (1cement 3 fine sand) Sqm 105

25

2625

12

Polished Blue Kota Stone flooring skirting laid over 20mm thick base of CM 14 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete

13

For area of each slab from 2001 to 5000 SqCm

30mm thick slab

Sqm 988

35

34580

14

Wall Painting with plastic emulsion paint of approved brand and manufacture to give an even shade

Two or more coats on new work including preparation of base with primer putty lippy complete in all respect Sqm 82

76

6232

15

Applying Exterior Emulsion Paint like ACE APEX or equivalent brand and manufacture of required shade to give an even shade including all scaffolding on prepared surface (excluding water primer)

New Work (Two or more coats) Sqm 119

28

3332

16

Applying one coat of Asian Paints DECO Primer (Water thinnable) of approved brand amp manufacture ic scrapping by sand papering and preparing the even surface on wallwall putty as base for ACE APEX or APEX ULTIMA ic all scaffolding(New Surface) Sqm 24

104

2496

23

17

providing and fixing steel gategrating and grills made of anglesteessqure bars flats or blackpipe with holdfast and fitting complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide kg 83

1250

103750

Demolishing cement concrete including disposal of material with in 50 meter lead

136 or richer mix Cum 319

30

9570

148 or leaner mix Cum 311

20

6220

18

Demolishing RCC work manually by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge

Cum 1085

30

32550

19

Rough chisel dressed stone flooring over 20mm (Av) thick base in CM 16 including pointing with cement mortar 12 (1 cement 2 stone dust) with and admixture of pigment to match the shade of stone with joint thickness upto 15mm

45mm thick red sand stone

Sqm 385

230

88550

20

Providing and fixing 1st quality standard white grey ivory fume red brown light green light blue and other light shades glazed tiles confirming to IS 13753 amp IS 15622 of size 300mm x 200mm in walls floors steps pillars etc laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar)

Catogary-A Kajaria Johnson Somani Orient make Sqm 763

25

19075

24

21

Applying one coat industrial grade bitumen of penetration 2585 of approved quality using 170 kg per Sqm on Damp Proof Coarse after cleaning the surface with brushes and finally with a piece of cloth slightly soaked in kerosene oil Sqm 103

45

4635

22

Providing and Fixing 30 too 40 mm thickk stone chajjas in cement sand mortar 14 including making gola at junction with wall concrete M-15 grade (124 nominal mix drip course

20 mm thick plastering in CM 16 on both Sqm 645

35

22575

23

Providing and fixing steel gate grating and grills made of angles tees square bars flatsor black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide

Kg 83

9750

809250

24

Extra if squarerectangular hollow tubelar sections are used or grill made by flats only

Kg

10

6490

64251

P amp F bolts including nuts and bolts complete

Kg 57

240

13680

25

Painting with ready mix paint of approved brand and manufacture in all shades to give an even shade

New Steel Work Sqm 40

1500

60000

Welding by electric plant cmlength 286

15000

42900

TOTAL OF BSR WORKS CIVIL

3046100

25

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - B- SANITARY WORKS

SL No Specification Unit Rate QTY Amount

1

P amp F GI Pipes (External Work) with GI Fittings excluding union (IS 1239 Mark) including trenching amp refilling earth etc

40mm dia nominal bore A Class

Mtr 338

32 10816

25mm dia nominal bore A Class

Mtr 182

48 8736

2

Making connection of GI distribution Branch with GI main including all Fitting

Beyond 25mm amp upto 100mm dia Each 332 8 2656

3

P amp F Sand ndashcast Floor Trap (Nahni) of (IS1729 mark) of approved qualitymake with socket down or hinged grating including cutting and making good the floor- 100 x 100mm Each

421

4 1684

4

P amp F Gun-metal Full-way Valve (IS778 Mark) or wheel valve of approved make

Gun metal 25mm nominal bore Each 702 4 2808

Gun metal 40mm nominal bore Each 1065 4 4260

5

P amp F PVC Storage Tank ISI Marked (IS 12701) indicating the BIS license No) of approved make with cover 25mm dia 1M long GI over-flow pipe amp 25 Cm long wash out pipe with plug amp socket including making connection etc complete of approved design

1000 litres capacity Each 5437 4 21748

6

P amp F push cock superior quality of approved make

CP brass 15 mm

Each 416

16 6656

TOTAL 5936400

26

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - C-HOTICULTURE WORKS

SL No Specification Unit Rate QTY Amount

1

Supply of dry manure including loading unloading transportation amp stacking at site

Goat dungmanure

Cum

50000

35

17500

2

Supply amp Stacking good earth at site complete including loading unloading amp transportation etc Cum

7500

55

4125

3

Supply of different varities of treeshrubsclimbers according to height and age of the plant at site including loadingunloading amp transportation etc complete

Different flowing plants 900mm to 1500mm Each

1500

115

1725

4

Supply of different varities of bougainvillea in poly bagsearthen pots according to height growth amp age of plant at site including loadingunloading amp transportation etc complete

Local variety of bougainvillea 600 mm to 900mm Each

1500

75

1125

5

Digging pits in ordinary soil amp refilling the same with the excavated earth mixed with manure in the ratio 21 by volume (2 parts of stacked volume of earth after reduction by 20 1 parts of stacked volume of manure after reduction by 8) flooding with water and dressing including removal of surplus earth Each

1000

150

1500

27

(Cost of manure or extra good earth if needed to be paid separately) pit dia 60 cm X 60 cm deep

6

Spreading of manure and good earth in required thickness (cost of manure and good earth to be paid separately) Cum

400

75

300

TOTAL OF HORTICULTURE WORKS

26275

28

SCHEDULE OF QUANTITIES

Name of work Pushkar Market Street- Restoration And Development Works

(Based on item rates)

PART - D- NON SOR WORKS

SL No

Specification Unit Rate to

be Quoted

QTY

Amount

1

Providing and fixing fine dressed sand stoneapproved stone JALIas per existing matching geometrical design including moulding work with fine finishing fixing with thambli by proper adhesive and white cement with pigment including making groove etc complete in all respect

(b) 50mm thick Sqm 45

2

Providing amp fixing ashlar Rain water Spouts (3) lines dressed as per traditional practice existing design approved design size 60 x 30 x 25 cm fixing the rain water spout with lime surkhi mortar 12 with proper slope complete in all respect Each

12

3

Providing amp fixing ornamental stone cladding of approved sand stone with dressing complete as per existing designpatternapproved designfixing with 30mm thickgrinded lime surkhi mortar 12 amp pointing with white cement with araldite and pigment to match shade the stone complete in all respect as per direction of Engineer incharge(75mm thick) Sqm

54

4

Providing and fixing fine dressed sand stone Dasacoping as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect

(c) 75mm to 100mm thick with pan patti design Sqm 320

5

Providing and fixing fine dressed sand stone Cladding (Plain dressing only) as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect including removal of damaged cladding

(a) 50mm to 60mm thick Sqm 180

6

Supply and istallation whiteredapproved shade sandstone dustbin of size 800 mm x 450 mm and height 850 mm with hollow center to hang MS Dustbin of size 400mmx 500mmx 600 mm made of 1mm thick metal sheet fixed to stone pillars with MS chain edged with 50x50x5 mm angle sections including cutting welding and fabrication with priming coat of red oxide and approved ready mix paint of approved shadeStone peices joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 26

29

7

Supply and istallation of RedWhiteapproved shade stone bench of size 1500mmx450mmx450 mm horizontal stone members of size 300mmx400mmx450mm on two sides supporting the horizontal seating stone of 150 mm thickness fixed to vertical stone members joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 35

8

Poviding fixing testing and commisioning of Stainless Steel body bull Storage Capacity in (litres) 150 bull Nominal Cooling Capacity (Litreshr) 150 bull No Of Faucets 2 bull Dimensions 820W x 700D x 1235 H bull Normal Demand (glasses hr) 750 bull Refrigerant R-22 bull Current (Amps) 749 bull Water Overflow (Connections) 12 BSP bull Type Of Compressor Rotary Model No- SDLX15150A make Blue star or similar in make of VoltasOasis

Each 4

9

Providing fixing testing and commissioning of water purification system having auto shut-off e-boiling Voltage Stabilizer bull Type of Treatment- sediment filter active carbon cartridge mineral guard UV chamber bull water flow rate 3ltrminbull ultra- violet lamp of 16 watts bull power rating of 35watt bull Dimensions 355H x 1025D x 307WModel ndash Hi fio Make Eureka Forbes- aquagard or similar in make of livpurekent

Each 4

10

Demolishion of the existing bituminous road surface to a depth of 150 mm and disposal of demolished material with a lift upto 3 m and lead upto 1000 m

Sqm 50

11

Providing and fixing fine dressed sand stone flooring with white sand stone (Bansh paharpurdholpur stone) (panji marked surface) machine cut of approved shade set in pattern over 30mm thick base in cement mortar 16 including pointing with cement mortar 12 (1 cement2 stone dust) mixed with pigment to match the shade of stone with joint thickness upto 5 mm as per existing flloringsample approved by the consultantapproved by (75mm thick)

Sqm 730

12

Providing and Fixing Cobbles stone of lime sand stone size 100X100MM and theakness of 70 to100mm on path way open court yards of color shade approved by the consultant over cement mortar 13 ( 1 cement3 course sand) keeping 10mm joint between cobbles filled with cement mortar 13 ( 1 cement3 course sand) the mortar should remain recessed by 5mm from the top surface of the cobble stone complete in all respects as per design and details provided by the consultant

Sqm 1650

13

Supply and installation of sanstone signage 450x200 mm of redwhiteapproved shade Sandstone 75 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete with fixing with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 6

30

14

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 450mmx2400mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved with ornamentation in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

15

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 650mmx1200mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

16

Heritage signage shall be etched on to Dulmera stone plaque of size 18m x 14m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 4

17

Signage shall be etched on to Dulmera stone plaque of size 18m x 10m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 12

18

Providing and fixing MS steel sheets 3 mm thickness on to MS anfgles flats tees and hollow sections with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Kg 10640

19

Providing and fixing MS perforated sheets 3 mm thickness with diamondround shaped perforations as per sample approved by the consultant with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Sqm 90

20

Painting of shop signages with lettering in hindienglish and ornamental design patterns in ready mix paint of approved brand and manfacture in all shades to give an even shade as per drawings and details provided by the consultant

Sqm 560

21

Flush pointing over joints of dressed stone cladding chajjas jali etc with neat cement sand amp colour including racking the joints as per Jodhpur practice including all leads and lifts with grinded mortar of lime putty and stone powder mixed in 11 ratio and gur methi gugal etc are to be mixed as per old traditional practice

Sqm 75

22

Khamira Colour Washing as per old traditional practice to prepare the Khamira the lime should be slaked at least for 7-10 days and regularly it should be stirred by adding cured Gugal for non-synthetic colour adding gum (babool gum) as per specificationThen applying prepared solution on walls three to four thin coats as desired finishing

Sqm 1750

31

23

Providing amp applying Lime kara 12 (1lime cream 2 Zikki powder) grinding mortar with grinding millmanually on lime baseon all flat surface in two coatsFirst coat applying 3mm to 4mm thick and curing properly at least 7 dayssecond finishing coat done after 7days of previous coat as per traditional practice(thickness not more than 6 mm)

Sqm 155

TOTAL OF NON SOR WORKS

7

MEMORANDUM IWe hereby tender for execution for the work within time specified and rates entered in the schedule G in all respects in accordance with the specifications designs drawings and instructions in writing referred to herein and in the annexed conditions with such materials as are provided for by and in all other respects in accordance with such conditions so far as applicable IWe have visited the site of work amp IWe amare fully aware of all the difficulties amp conditions likely to effect carrying out of the work IWe have fully acquainted myselfourselves about the conditions in regard to accessibility of site and quarrieskilns nature and the extent of ground working conditions including stacking of material installation of TampP conditions affecting accommodation and movement of labour etc required for the satisfactory execution of this contract (a) Name of work (b) Estimated Cost (in figures) Rs

(in words) Rs

(c) Earnest Money Rs (d) Security Deposit (Including Earnest Money) Rs NOTE (1) Security deposit to be 10 in the form of cash or deduction to be made from running bills (2) Time allowed for the work to be reckoned from the 10

th day after the date of written order to

commence the work Should this tender be accepted in whole or in part IWe hereby agree to abide-by and fulfill all terms and provisions of the conditions of contract annexed hereto and in the NIT or in default thereof to forfeit and pay to the General Manager (Works) Jaipur the sum of money mentioned in the said conditions A sum of Rs is enclosed herewith as earnest money This amount of earnest money shall absolutely be forfeited to Department without prejudice to any other right or remedies should IWe fail to commence the work specified in the above memorandum or should IWe not furnish performance guarantee in cash or in form or Bank guarantee at the time of execution of agreement specified in the above memorandum in accordance with the said conditions of contract

Signature of Contractor The above tender is hereby accepted by me

General Manager-Works

RTDCLTD JAIPUR

8

DIRECTIONS FOR GUIDANCE OF CONTRACTORS

1 All works proposed for execution by contract will be notified in a form of invitation to tender pasted on a board hung up in the

office and signed by General Manager-Works RTDC LTD Jaipur or duly authorized officer

The form of invitation to tender will state the work to be carried out as well as the date of submitting and opening of tenders

amp the time allowed for carrying out the work also the amount of earnest money to be deposited with the tender and the

amount of security deposit to be deposited by the successful tenderer and the percentage as per PWFampAR Govt of

Rajasthan to be deducted from the bills copies of the specifications designs and drawing and estimated ratesscheduled

rates and any other documents required in connection with the work for the purpose of identification by the Rajasthan

Tourism Development Corpn Jaipur Drawings shall also be open for inspection by the contractor at the office of the General

Manager9 Works) Rajasthan Tourism Development Corporation Ltd Jaipur or duly authorized Engineer during office hours

2 In the event of the tender being submitted by a firm it must be signed separately by each partner thereof or in the event of

the absence of any partner it must be signed on his behalf by a person holding power of attorney authorizing him to do so

3 Receipt for payment made on account of a work when executed by a firm must also be signed by the several partners

except where the contractor are described in their tender as a firm in which case the receipt must be signed in the name of

the firm by one of the partners or by some other person having to give effectual receipts for the firm

4 Any person who submits tender shall fill up the usual printed form stating at how much percent above or below the rates

specified or on item rates he is willing to undertake the work Tenders which propose any alteration in the work specified in

the said form of invitation to tender or in the time allowed for carrying out the work or which contain any other conditions of

any sort will be liable to rejection No single tender shall include more than one work but person who wish to tender for two

or more works shall submit a separate tender for each work Tender shall have the name and number of the work to which

they refer written outside the envelope

5 The General Manager-Works RTDC Ltd Jaipur or other duly authorized Engineer will open the tenders in the presence of

any intending contractors or their authorized representative who may be present at the time and will enter the amounts of the

several tenders in the Register of tenders in the event of the tender being accepted A receipt for the earnest money

forwarded therein shall there upon be given to the contractor who shall there-upon for the purpose of identification sign

copies of the specifications and other documents In the event of a tender being rejected the earnest money forwarded with

such unaccepted tender shall be returned to the contractor

6 The General Manager-Works RTDC Ltd Jaipur or other authorized Engineer shall have the right of rejecting all or any of

the tenders without assigning any reasons

7 The accompanying schedules of quantities in ldquoGrdquo Schedule are the architects estimated quantities for the work The

contractors shall attach histheir OWN prices for the each item in column for rates left blank and shall money out the same in

the final column amp totals HeThey shall fill up properly the form of tender and the schedule of quantities without adding any

stipulations thereto The tender shall show the total amount arrived at in the manner above described The tender Notice to

Contractors conditions of contract Specifications and the Schedule of quantities and rates etc shall all be embodied in and

shall form a part of the contract

8 The quantities contained in the Schedule are only approximately correct If more or less quantities are actually done on the

work the contractors shall be paid for the same at the rates tendered by himthem in the Schedule of Rates The work as

actually done will be measured by the contractors qualified engineer and bill furnished to the General Manager(Works)

RTDC Ltd Jaipur which in turn will get it checked by the Engineer in charge time to time and will be paid for as provided in

the Special Condition of Contract after deducting SD as per PWFampAR provisions

Signature of Contractor

9

GENERAL CONDITIONS OF CONTRACT 1 All the materials used shall be of approved quality and to the entire satisfaction of the General Manager-works RTDC Ltd

Jaipur

2 The General Manager-works RTDC Ltd Jaipur or the Engineer in charge reserves right for any additions and alternations or

omission in the tender and execution of works In case the Department supplies the material specified in the tender recovery for

the cost of supplied material from subsequent running Bill will be made

3 The Department shall pay to the contractor as detailed in special conditions of contract

4 The contractors isare to set out the work in accordance with the plans All lines to be accurately marked or otherwise to the

satisfaction of the Engineer in charge

5 The contractors shall meet the Engineer in charge or his representative at the works site whenever required

6 The contractors shall maintain and be represented on site at all times by a responsible and efficient EngineerArchitect who

thoroughly understands all the trades enrolled The Engineer in charge reserves the right to dismiss the Foremen and any

workmen who in his opinions are not sufficiently skilled or who neglect or refuse to obey instructions

7 The contractors shall be given one set of the plans free of charge

8 The General Manager-works RTDC Ltd Jaipur reserves the right of altering the drawings and nature of the work and adding

to or omitting any item of work or having portions of the same carried out departmentally or otherwise and such alterations or

variations shall be carried out without prejudice to the contract

9 The General Manager-works RTDC Ltd Jaipur reserves to the right to increase or decrease quantity of work or omit some part

of the work without violating the contract and for which he will not be held liable to compensation to the contractors

10 All plants machines and other equipments are to be arranged by contractor for the work

11 Any percentage rate tender containing item-wise rates and any item rate tender containing percentage rate below or above

estimatedscheduled rates will be summarily rejected

12 The Conditions of Contract shall govern sales tax or any other tax on materials or Income Tax in respect of the contract

Deduction of Income Tax at source will be made as per provisions of the Income Tax Act in force from time to time

13 If on check there are differences between the rate quoted by the Contractor in words and figures or in the amount worked out

by him the following procedure shall be followed -

(i) Where there is a difference between the rates in figures and words lower of the two rates shall be taken as valid and correct

rate

(ii) When the rate quoted by the contractor in figures and in words tallies but the amount is not worked out correctly the rate

quoted by the contractor shall be taken as correct and not the amount worked out

(iii) While quoting rates if raterates against any item or items are found to be omitted the rate given in the Schedule G by the

Department for such items will be taken into account while preparing comparative statement and contractor shall be bound to

execute such item on G Schedule rates

(iv) In case where percentage is given but the above or below not scored the tender will be non-responsive

14 The Contractor shall read the specifications and study the working drawings carefully before submitting the tender

15 After acceptance of the tender the Contractor or all partners (in the case of partnership firm) will append photographs and

signatures duly attested at the time of execution of agreement

16 Experience into similar nature of works for which tender invited and fulfill conditions of NIT

17 Contractors shall submit only unconditional tenders Conditional tenders are liable to be rejected similarly

Signature of Contractor

General Manager-Works

10

SPECIAL CONDITIONS OF CONTRACT

1 The Technical bid will be opened first on the day mentioned in the NIT Bidders will be evaluated as per norms set for

qualification in Technical bid and Financial bids of only those bidders will be opened which were qualify in the technical bid

2 Contractors bidding for the work should be reputed experienced contractors fulfilling the requirements laid down in the NIT

and well versed and working in the field Only those bidders will be considered qualified in the Technical bid who have

executed similar works to the tune of at least 13rd of the estimated value of the work (published in NIT) during last five

years (updated to current price level 100 per annum) and have the necessary technical expertise and support

machinery and administrative and financial capability to satisfactorily execute works in question for which they are bidding

3 The decision of the General Manager-works RTDC Ltd Jaipur or his representative on pre-qualification in the Technical bid

will be final amp binding

4 All raw materials will have to be brought to the site and all carving work will have to be executed only at site to qualify for

payment of running bills No payment of any material at or work done at place other than the site of work will be made

unless such material is brought to site and found acceptable to be used on the work

5 General conditions of contract special conditions of contract and specification of work as appended herewith in addition to

General condition of agreement will be applicable on this work In addition the PWD specifications will also be applicable

as relevant to the particular item of work

6 Work shall be carried out as per approved drawings and designs to be provided by the departmental architect engaged

7 Architectural work for the construction shall be of a high standard quality and pattern (class and style) to match the existing

work

8 All work shall be carried out as per approved samples of each element

9 The exposed surface of stonework will be suitably protected from damage disfigurement during the course of work and will

be cleaned and washed removing all spots etc for final acceptance on completion

10 All scaffolding shuttering TampP etc for the work shall have to be arranged by contractor at his own cost

11 The time for completion of work as given in the NIT shall be strictly adhered to and the work so planned as to be completed

within the scheduled period The contractor shall provide with a time schedule to the department for progressing with and

completing various stages of the work

12 Only best quality stone and other building materials shall be used in construction and all such material will be got approved

from the Engineer in-charge before use

13 Quantities of individual items can be increased invariably or even reduced withdrawn and specification and designs altered

at the discretion of Engineer in-charge and contractor will not be entitled to any compensation thereof for such alteration For

extra items if any rates will be decided based on market analysis to be provided by contractor

14 Contractor will give notice before any work is covered up Bad work will have to be redonereplaced at contractors cost

15 Full scale drawings form work for architectural stone work to be developed from drawings wherever necessary shall be got

prepared by contractor for prior approval before Signature of contractor

construction at his own cost and he will get these approved from the Engineer in-charge General Manager-Works RTDC

Ltd Jaipur who shall however be at liberty to modify such drawings form work and no extra payment shall be made for this

16 It will be the contractors responsibility to get the drawings formwork and sample of individual itemselements of work

approved from the departmental Architect Engineer before proceeding with manufacture of the same at site

17 The contractor shall provide adequate safety measures and proper insurance for his labour working at site and it shall be

done by contractor at his end Contractor shall settle all labour disputes at his own level The contractor shall observe all

labourfactory laws in force

18 Security deposit will be recovered from each running bill of contractor as per provisions of PWFampAR Earnest money will be

adjusted in the security deposit amount Security deposit shall be returned after one year satisfactory completion of the work

and on satisfactory performance of structure

19 No escalation will be payable even if the completion period exceeds that as stipulated

20 In case of unsatisfactory work by contractor or deliberate delaying the work without valid reasons the contract will be liable

to be terminated at the stage up to which acceptable work is done and paid for with no compensation of any sort payable to

contractor for withdrawal at that stage and possession of work executed at site will be taken over by Department In case of

any dispute the decision of the Department will be final and binding on the contractor

21 The bidder has to furnish with his technical bid (In prescribed Performarsquos Schedule 1-5)

Full information regarding financial resources and capability in Schedule-1 herewith(Photocopy to be made out of schedule)

a) Details of works of similar type and magnitude completed in last 5 years by the tenderer in Schedule II (Photocopy to be

made out of schedule)

b) Details of works bids and works to be completed in Schedule-III (Photocopy to be made out of schedule)

c) Details of technical supervisory personnel and master craftsman craftsman which he proposes to utilize for this work in

Schedule IV (Photocopy to be made out of schedule)

d) Details of plant and equipment proposed for use in the work in Schedule V (Photocopy to be made out of schedule)

11

e) The bidder should demonstrate that they have adequate financial resources (Over draft Credit Limit letter from bank)

Signature of Contractor

22 Bid capacity

(i) Bidders who meet the minimum qualifying criteria are to be evaluated further for Bid capacity as under -

(a) Maximum value of similar works executed in any one year during the last five years including current year (updated to the

current price level) extracted from schedule II which will take into account the completed and on going works

(b) Value of the existing commitments works (complete or partial) to be completed in the coming 12 months (up dated to the

current price level) Extracted from schedule III

(ii) Bid Capacity=(AxNx3-B) where

A=Maximum value of works executed in any one year during the last five years (updated to present price level) taking into

account the completed as well as works in progress

N=Number of years prescribed for completion of the works for which bids are invited herein (in years)

B=Value at present price level of existing commitments and on going works (at hand) to be executed during N period

The bidder will be post qualified only if his bid capacity is equal or more than the cost of work in question No contract may be

awarded to bidder lacking the financial and technical resources to undertake the work The decision of General Manager

(Works) Rajasthan Tourism Development Corporation Ltd Jaipur in this regard will be final and binding

NOTE -The present price level for turn over cost of completed works and amount of similar nature works (of a value at least 13rd of the estimated value of the work published in NIT during last five years) the previous years value shall be given weightage of 10 per year as following for the tendersbids invited by this department ndash

(a) For last year - 100 (b) For one year before - 110 (c) For two year before - 121 (d) For three year before - 133 (e) For four year before - 146

For current year the price level shall be 10

23 The right to qualify or not to qualify any or all the bidders without assigning any reason is reserved with the General Manager

(Works) Rajasthan Tourism Development Corporation Ltd Jaipur

24 Determination of Responsiveness

a) Prior to the detailed evaluation of bids the General Manager (Works) Rajasthan Tourism Development Corporation Ltd

JAIPUR will determine whether each bid is substantially responsive to the requirements of the bidding documents

b) For the purpose of this clause a substantially responsive bid is one which has required capacity capability and financial

resources and whose bid conforms to all the terms conditions and specifications of the bidding documents without

material deviation or reservation A material deviation or reservation is one which affects in any substantial way the

scope quality or performance of the works or which limits in any substantial way the General Manager (Works)

Rajasthan Tourism Development Corporation Ltd JAIPURrsquoS right or the Bidders obligations under the contract and the

rectification of which deviation or reservation would effect unfairly the competitive position of other bidders presenting

substantially responsive bids

c) if a bid is not substantially responsive to the requirements of the bidding documents it will be rejected and may not

subsequently be made responsive by the bidder having corrected or withdrawn the nonconforming deviation or

reservation

25 Construction programme ndash

1) Within the time stated in this contract the Contractor shall after the acceptance of his tender submit to the General Manager

(Works) Rajasthan Tourism Development Corporation Ltd JAIPUR for approval programme together with bar chart PERT

chart

2) proposed deployment of machinery etc showing the order of procedure in which he proposes to carryout the works The

contractor shall provide in writing general description the arrangements deployment of equipment work planning and

methods which he proposes to adopt for the execution of the works

3) If at any time it should appear to the Department that actual progress of the work does not conform to the approved

programme referred to in sub-clause (1) of this clause the Contractor shall produce at the request of the Department a

revised programme showing the modifications to the approved programme necessary to ensure completion of the works

within the time for completion

4) The submission to and approval by the Department of such programmers or the furnishing of such particulars shall not

relieve the contractor of any of his duties or responsibilities under the contract

5) The contractor shall submit within 30 days after the date of notice to proceed with the work a detailed construction

programme to suit the programme of completion for the entire contract period This programme shall be reviewed and

revised every half year at the beginning of the working season to plan timely action for making up the slippages occurred in

the previous season to suit the stipulated period of completion (including mile stones) as extended from time to time

26 Materials workmanship period and certificates of Maintenance and Defect Liability etc

All materials and workmanship shall be of the respective kinds described in the contract and in accordance with the

ArchitectsEngineer instructions and shall be subjected from time to time to such tests as the Engineer may direct at the

place of manufacture or fabrication or on the site or at such other place or places as may be specified in the Contract or at

all or any of such places The contractor shall install quality control laboratory and provide such assistance instruments

machines labour and materials as are normally required for examining measuring and test in any work and the quality

weight or quantity of any material used and shall supply samples of materials before incorporation in the works for testing as

may be selected and required by the Engineer-in-charge

12

Signature of Contractor

27 Period of maintenance and Defects liability

The Contractor shall be responsible to make good within such period as maybe stipulated by the Engineer in-charge any

defect which may develop or may be noticed during period of maintenance of 12 months from the certified date of

completion and which is attributable to the contractor All notice of such defect shall be given to the Contractor promptly In

case the contractor fails to make good the defects the Engineer in-charge may employ other persons to make good such

defects and all expenses consequent thereof and incidental thereto shall be recoverable from the Contractor In the event

the employer takes over portions of work as they are completed the liability of the contractor under this clause for these

portions shall extend to a period of 24 months from the actual dates on which portions of the works are taken over

28 The successful biddercontractor is required to undertake detailed photo recording documentation by still photography

videography of the entire work prior to commencement and the same has to be deposited with the Engineer in charge of

RAJASTHAN TOURISM DEVELOPMENT CORPORATION JAIPUR in two copies immediately Before dismantling any old

work to redo this still photography with specifically putting some identity mark number of the portion by any specified means

has to be done and this to be got checked and certified by Engineer In charge and recorded specifically in the measurement

book (MB) A written permission from the Engineer in charge before commencement of executing such work is essential for

execution as well as for payments

During the work in progress and after its completion also photo documentation is necessary and the photos before amp after

completion of portion of work are essentially to be enclosed with the bill for payment

Signature of Contractor

GENERAL MANAGER (WORKS)

13

SCHEDULE-I

FINANCIAL RESOURCES AND CAPABILITY

(PURSUANT TO CLAUSE 26) 1 Name of Applicant

2 Name of Partner Director

3 Capital

(a) Authorised

(b) ii

4 (a) WhetheCategory of Enlisted in Govt

(b) Details Details of the work completed and applicants performance record for last five years

(information to be furnished in Schedule II in India

(c) Details of works in hand applicants performance record for last five years (Information to be

furnished in Schedule-III)

5 Furnish Balance Sheet and profit and loss statement with auditorrsquos report for the last three years

6 The information on the following aspects should be specifically furnished

(i) Working capital and net worth

(ii) Turnover for the years

a

b

c

(iii) Gross income in years in India

(i)

(ii)

(iii)

(iv) Quick ratio or acid test ration (Quick assets to current liabilities)

7 What is the maximum annual turnover of the project that you can handle (Financial Projection)

8 Have you ever been denied tendering facilities by any Governmental DepartmentPublic Sector

undertaking

(If yes Please give details)

9 List of your source of finance

10 Certificate of financial soundness by Bank

11 Name and address of Bank from whom reference can be obtained

12 Have you ever been declared bankrupt

(if yes please give details)

Signature of Contractor

14

SCHEDULE-II WORKS OF SIMILAR MAGNITUDE TO THE WORK UNDER CONSIDERATION COMPLETED BY THE

APPLICANT IN LAST FIVE YEARS IN INDIA

(Pursuant to Clause 26)

SNo Na

me

of

wor

k

Place

amp

State

Tender

awardi

ng

Agency

Tender

ed Cost

Stipulate

d time of

Completi

on

Time in

which

complete

d

Date

of

comp

letion

Reason

for

Delay

Principal

features

of work

done

Value of

work done

1 2 3 4 5 6 7 8 9 10 11

Year

Year

Year

Signature of Contractor

15

SCHEDULE-III WORKS TENDERED FOR amp WORKS TO BE COMPLETED AS ON THE DATE OF SUBMISSION OF

APPLICATION IN INDIA

(pursuant Clause 26)

SNo Name

of

work

Place

amp

State

Work on Hand Work tendered for

Tender

Cost amp

Date

or

award

Stipulated

period of

Completion

Cost of

work

remaining

to be

executed

Antici

pated

Date

of

compl

eted

Estimate

d cost

(Rs In

Lakh)

Date

when

decisio

n

expecte

d

Stipulate

d Date

period of

Completi

on

Remar

ks

1 2 3 4 5 6 7 8 9 10 11

Year

Year

Year

Signature of Contractor

16

SCHEDULE- IV

Details of Key Personnel intended to be employed for this work

(use separate sheet if necessary)

(Pursuant to clause 26)

S No Name of Person Qualification Designation Experience Work to be

put on

A Technical Personnel

(1)

(2)

(3)

(4)

B Administrative Personnel

(1)

(2)

(3)

(4)

C Master Craftsmen

(1)

(2)

(3)

(4)

D Craftsmen

(1)

(2)

(3)

(4)

E Any other (1)

(2)

(3)

(4)

Signature of Contractor

17

SCHEDULE- V

DETAILS OF MAJOR ITEMS OF CONSTRUCTION PLANT AVAILABLE FOR THIS WORK

S No

Particulars Make Year of manufacture

Nos Whether owned or confirmed lease

1 Lime mortar Mill

2 Scaffolding Material

3 Movable Gantry

Crane etc

4 Any other TampP for

the purpose

5

6

7

8

Signature of Contractor

18

RAJASTHAN TOURISM DEVELOPMENT CORPORATION LIMITED JAIPUR

(WORKS DIVISION)

TENDER DOCUMENT (Financial Bid)

E-Tender (NIT No) 082016-17

Name of work- Pushkar Market Street- Restoration And Development Works

Restoration Conservation work Stained GssMirror

Signature of Contractor

19

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works

(Based on PWD BSR CIVILElectrical Ajmer Circle - 2013 and item rates)

SCHEDULE -G

GENERAL ABSTRACT

SNO WORK AMOUNT

1

PART A- CIVIL WORKS BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

304610000

2

PART B- SANITARY WORKS BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

5936400

3

PART C- HORTICULTURE BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

2627500

4

PART D-NON BSR ITEMS ( CIVIL AND ELECTRICAL)

GRAND TOTAL

I we hereby agree to execute the work PART A In figures Above Below In words

Above below PART B In figures Above Below In words

Above below PART C In figures Above Below In words

Above below PART D In figures Above Below In words

Above below

General Manager Works

RTDC Ltd Jaipur

Signature of the Contractor With Full Postal Address

20

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works

(Based on PWD BSR Civil Ajmer Circle - 2013)

PART A- CIVIL WORKS

SL No Specification Unit Rate QTY Amount

1

Surface Dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr and lift up to 15 Mtr All kinds of soil 100Sqm 437

26

11362

2

Surface Dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr and lift up to 15 Mtr All kinds of soil Cum 127

30

3810

3

Filling available excavated earth (excluding rock) in trenches plinth side of foundation etc in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift Cum 61

12 732

4

Providing and laying in position cement concrete including curing compaction etc complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level

M15 grade Nominal Mix (with graded stone aggregate 20mm nominal size) Cum

3438

230

790740

5

Random Rubble stone masonry for foundation and plinth in Cement Sand mortar above 30 CM thick wall in

21

Cement Mortar 13 ( 1-Cement 3-Sand) Cum

2193

35

76755

6

Random Rubble stone masonry for superstructure above plinth level one storey height above 30cm thick walls in

Cement Mortar 13 ( 1-Cement 3-Sand) Cum

2686

135

362610

7

Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor three level including curing compaction finishing with rendering in cement sand mortar 13 (1 cement 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement for -

Beams suspended floors roofs griders having slopes up to 15ordm landings balconies shelves chajjas lintels bands plain windows sills staircases and spiral staircases etc

M20 grade Nominal Mix

Cum 5138

45

231210

8

Centering amp shuttering with plywood or steel sheets including strutting propping bracing both ways with wooden members and removal of formwork for upto floor three level for

Suspended floors roofs landings staircases balconies girders cantilevers bands coping bed plates anchor blocks sills chhajjas lintel beam etc Sqm 222

60

13320

9

Providing and fabricating reinforcement using steel of SAILVIZAK-RINLTATA TISCONESSARZINDAL VIJAINAGAR IS 1786-1986 for RCC work including straightening cutting bending placing in position and binding (including cost of binding wire) all complete up to floor three level

22

Thermo-Mechanically Treated bars (Conforming of relevent IS code) Kg 78

2630

205140

10

Plaster on new surface on wall in cement sand mortar 13 including racking of joints etc complete fine finish

20mm thick Sqm 161

150

24150

11

6mm thick cement plaster to ceiling of mix 13 (1cement 3 fine sand) Sqm 105

25

2625

12

Polished Blue Kota Stone flooring skirting laid over 20mm thick base of CM 14 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete

13

For area of each slab from 2001 to 5000 SqCm

30mm thick slab

Sqm 988

35

34580

14

Wall Painting with plastic emulsion paint of approved brand and manufacture to give an even shade

Two or more coats on new work including preparation of base with primer putty lippy complete in all respect Sqm 82

76

6232

15

Applying Exterior Emulsion Paint like ACE APEX or equivalent brand and manufacture of required shade to give an even shade including all scaffolding on prepared surface (excluding water primer)

New Work (Two or more coats) Sqm 119

28

3332

16

Applying one coat of Asian Paints DECO Primer (Water thinnable) of approved brand amp manufacture ic scrapping by sand papering and preparing the even surface on wallwall putty as base for ACE APEX or APEX ULTIMA ic all scaffolding(New Surface) Sqm 24

104

2496

23

17

providing and fixing steel gategrating and grills made of anglesteessqure bars flats or blackpipe with holdfast and fitting complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide kg 83

1250

103750

Demolishing cement concrete including disposal of material with in 50 meter lead

136 or richer mix Cum 319

30

9570

148 or leaner mix Cum 311

20

6220

18

Demolishing RCC work manually by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge

Cum 1085

30

32550

19

Rough chisel dressed stone flooring over 20mm (Av) thick base in CM 16 including pointing with cement mortar 12 (1 cement 2 stone dust) with and admixture of pigment to match the shade of stone with joint thickness upto 15mm

45mm thick red sand stone

Sqm 385

230

88550

20

Providing and fixing 1st quality standard white grey ivory fume red brown light green light blue and other light shades glazed tiles confirming to IS 13753 amp IS 15622 of size 300mm x 200mm in walls floors steps pillars etc laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar)

Catogary-A Kajaria Johnson Somani Orient make Sqm 763

25

19075

24

21

Applying one coat industrial grade bitumen of penetration 2585 of approved quality using 170 kg per Sqm on Damp Proof Coarse after cleaning the surface with brushes and finally with a piece of cloth slightly soaked in kerosene oil Sqm 103

45

4635

22

Providing and Fixing 30 too 40 mm thickk stone chajjas in cement sand mortar 14 including making gola at junction with wall concrete M-15 grade (124 nominal mix drip course

20 mm thick plastering in CM 16 on both Sqm 645

35

22575

23

Providing and fixing steel gate grating and grills made of angles tees square bars flatsor black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide

Kg 83

9750

809250

24

Extra if squarerectangular hollow tubelar sections are used or grill made by flats only

Kg

10

6490

64251

P amp F bolts including nuts and bolts complete

Kg 57

240

13680

25

Painting with ready mix paint of approved brand and manufacture in all shades to give an even shade

New Steel Work Sqm 40

1500

60000

Welding by electric plant cmlength 286

15000

42900

TOTAL OF BSR WORKS CIVIL

3046100

25

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - B- SANITARY WORKS

SL No Specification Unit Rate QTY Amount

1

P amp F GI Pipes (External Work) with GI Fittings excluding union (IS 1239 Mark) including trenching amp refilling earth etc

40mm dia nominal bore A Class

Mtr 338

32 10816

25mm dia nominal bore A Class

Mtr 182

48 8736

2

Making connection of GI distribution Branch with GI main including all Fitting

Beyond 25mm amp upto 100mm dia Each 332 8 2656

3

P amp F Sand ndashcast Floor Trap (Nahni) of (IS1729 mark) of approved qualitymake with socket down or hinged grating including cutting and making good the floor- 100 x 100mm Each

421

4 1684

4

P amp F Gun-metal Full-way Valve (IS778 Mark) or wheel valve of approved make

Gun metal 25mm nominal bore Each 702 4 2808

Gun metal 40mm nominal bore Each 1065 4 4260

5

P amp F PVC Storage Tank ISI Marked (IS 12701) indicating the BIS license No) of approved make with cover 25mm dia 1M long GI over-flow pipe amp 25 Cm long wash out pipe with plug amp socket including making connection etc complete of approved design

1000 litres capacity Each 5437 4 21748

6

P amp F push cock superior quality of approved make

CP brass 15 mm

Each 416

16 6656

TOTAL 5936400

26

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - C-HOTICULTURE WORKS

SL No Specification Unit Rate QTY Amount

1

Supply of dry manure including loading unloading transportation amp stacking at site

Goat dungmanure

Cum

50000

35

17500

2

Supply amp Stacking good earth at site complete including loading unloading amp transportation etc Cum

7500

55

4125

3

Supply of different varities of treeshrubsclimbers according to height and age of the plant at site including loadingunloading amp transportation etc complete

Different flowing plants 900mm to 1500mm Each

1500

115

1725

4

Supply of different varities of bougainvillea in poly bagsearthen pots according to height growth amp age of plant at site including loadingunloading amp transportation etc complete

Local variety of bougainvillea 600 mm to 900mm Each

1500

75

1125

5

Digging pits in ordinary soil amp refilling the same with the excavated earth mixed with manure in the ratio 21 by volume (2 parts of stacked volume of earth after reduction by 20 1 parts of stacked volume of manure after reduction by 8) flooding with water and dressing including removal of surplus earth Each

1000

150

1500

27

(Cost of manure or extra good earth if needed to be paid separately) pit dia 60 cm X 60 cm deep

6

Spreading of manure and good earth in required thickness (cost of manure and good earth to be paid separately) Cum

400

75

300

TOTAL OF HORTICULTURE WORKS

26275

28

SCHEDULE OF QUANTITIES

Name of work Pushkar Market Street- Restoration And Development Works

(Based on item rates)

PART - D- NON SOR WORKS

SL No

Specification Unit Rate to

be Quoted

QTY

Amount

1

Providing and fixing fine dressed sand stoneapproved stone JALIas per existing matching geometrical design including moulding work with fine finishing fixing with thambli by proper adhesive and white cement with pigment including making groove etc complete in all respect

(b) 50mm thick Sqm 45

2

Providing amp fixing ashlar Rain water Spouts (3) lines dressed as per traditional practice existing design approved design size 60 x 30 x 25 cm fixing the rain water spout with lime surkhi mortar 12 with proper slope complete in all respect Each

12

3

Providing amp fixing ornamental stone cladding of approved sand stone with dressing complete as per existing designpatternapproved designfixing with 30mm thickgrinded lime surkhi mortar 12 amp pointing with white cement with araldite and pigment to match shade the stone complete in all respect as per direction of Engineer incharge(75mm thick) Sqm

54

4

Providing and fixing fine dressed sand stone Dasacoping as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect

(c) 75mm to 100mm thick with pan patti design Sqm 320

5

Providing and fixing fine dressed sand stone Cladding (Plain dressing only) as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect including removal of damaged cladding

(a) 50mm to 60mm thick Sqm 180

6

Supply and istallation whiteredapproved shade sandstone dustbin of size 800 mm x 450 mm and height 850 mm with hollow center to hang MS Dustbin of size 400mmx 500mmx 600 mm made of 1mm thick metal sheet fixed to stone pillars with MS chain edged with 50x50x5 mm angle sections including cutting welding and fabrication with priming coat of red oxide and approved ready mix paint of approved shadeStone peices joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 26

29

7

Supply and istallation of RedWhiteapproved shade stone bench of size 1500mmx450mmx450 mm horizontal stone members of size 300mmx400mmx450mm on two sides supporting the horizontal seating stone of 150 mm thickness fixed to vertical stone members joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 35

8

Poviding fixing testing and commisioning of Stainless Steel body bull Storage Capacity in (litres) 150 bull Nominal Cooling Capacity (Litreshr) 150 bull No Of Faucets 2 bull Dimensions 820W x 700D x 1235 H bull Normal Demand (glasses hr) 750 bull Refrigerant R-22 bull Current (Amps) 749 bull Water Overflow (Connections) 12 BSP bull Type Of Compressor Rotary Model No- SDLX15150A make Blue star or similar in make of VoltasOasis

Each 4

9

Providing fixing testing and commissioning of water purification system having auto shut-off e-boiling Voltage Stabilizer bull Type of Treatment- sediment filter active carbon cartridge mineral guard UV chamber bull water flow rate 3ltrminbull ultra- violet lamp of 16 watts bull power rating of 35watt bull Dimensions 355H x 1025D x 307WModel ndash Hi fio Make Eureka Forbes- aquagard or similar in make of livpurekent

Each 4

10

Demolishion of the existing bituminous road surface to a depth of 150 mm and disposal of demolished material with a lift upto 3 m and lead upto 1000 m

Sqm 50

11

Providing and fixing fine dressed sand stone flooring with white sand stone (Bansh paharpurdholpur stone) (panji marked surface) machine cut of approved shade set in pattern over 30mm thick base in cement mortar 16 including pointing with cement mortar 12 (1 cement2 stone dust) mixed with pigment to match the shade of stone with joint thickness upto 5 mm as per existing flloringsample approved by the consultantapproved by (75mm thick)

Sqm 730

12

Providing and Fixing Cobbles stone of lime sand stone size 100X100MM and theakness of 70 to100mm on path way open court yards of color shade approved by the consultant over cement mortar 13 ( 1 cement3 course sand) keeping 10mm joint between cobbles filled with cement mortar 13 ( 1 cement3 course sand) the mortar should remain recessed by 5mm from the top surface of the cobble stone complete in all respects as per design and details provided by the consultant

Sqm 1650

13

Supply and installation of sanstone signage 450x200 mm of redwhiteapproved shade Sandstone 75 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete with fixing with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 6

30

14

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 450mmx2400mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved with ornamentation in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

15

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 650mmx1200mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

16

Heritage signage shall be etched on to Dulmera stone plaque of size 18m x 14m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 4

17

Signage shall be etched on to Dulmera stone plaque of size 18m x 10m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 12

18

Providing and fixing MS steel sheets 3 mm thickness on to MS anfgles flats tees and hollow sections with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Kg 10640

19

Providing and fixing MS perforated sheets 3 mm thickness with diamondround shaped perforations as per sample approved by the consultant with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Sqm 90

20

Painting of shop signages with lettering in hindienglish and ornamental design patterns in ready mix paint of approved brand and manfacture in all shades to give an even shade as per drawings and details provided by the consultant

Sqm 560

21

Flush pointing over joints of dressed stone cladding chajjas jali etc with neat cement sand amp colour including racking the joints as per Jodhpur practice including all leads and lifts with grinded mortar of lime putty and stone powder mixed in 11 ratio and gur methi gugal etc are to be mixed as per old traditional practice

Sqm 75

22

Khamira Colour Washing as per old traditional practice to prepare the Khamira the lime should be slaked at least for 7-10 days and regularly it should be stirred by adding cured Gugal for non-synthetic colour adding gum (babool gum) as per specificationThen applying prepared solution on walls three to four thin coats as desired finishing

Sqm 1750

31

23

Providing amp applying Lime kara 12 (1lime cream 2 Zikki powder) grinding mortar with grinding millmanually on lime baseon all flat surface in two coatsFirst coat applying 3mm to 4mm thick and curing properly at least 7 dayssecond finishing coat done after 7days of previous coat as per traditional practice(thickness not more than 6 mm)

Sqm 155

TOTAL OF NON SOR WORKS

8

DIRECTIONS FOR GUIDANCE OF CONTRACTORS

1 All works proposed for execution by contract will be notified in a form of invitation to tender pasted on a board hung up in the

office and signed by General Manager-Works RTDC LTD Jaipur or duly authorized officer

The form of invitation to tender will state the work to be carried out as well as the date of submitting and opening of tenders

amp the time allowed for carrying out the work also the amount of earnest money to be deposited with the tender and the

amount of security deposit to be deposited by the successful tenderer and the percentage as per PWFampAR Govt of

Rajasthan to be deducted from the bills copies of the specifications designs and drawing and estimated ratesscheduled

rates and any other documents required in connection with the work for the purpose of identification by the Rajasthan

Tourism Development Corpn Jaipur Drawings shall also be open for inspection by the contractor at the office of the General

Manager9 Works) Rajasthan Tourism Development Corporation Ltd Jaipur or duly authorized Engineer during office hours

2 In the event of the tender being submitted by a firm it must be signed separately by each partner thereof or in the event of

the absence of any partner it must be signed on his behalf by a person holding power of attorney authorizing him to do so

3 Receipt for payment made on account of a work when executed by a firm must also be signed by the several partners

except where the contractor are described in their tender as a firm in which case the receipt must be signed in the name of

the firm by one of the partners or by some other person having to give effectual receipts for the firm

4 Any person who submits tender shall fill up the usual printed form stating at how much percent above or below the rates

specified or on item rates he is willing to undertake the work Tenders which propose any alteration in the work specified in

the said form of invitation to tender or in the time allowed for carrying out the work or which contain any other conditions of

any sort will be liable to rejection No single tender shall include more than one work but person who wish to tender for two

or more works shall submit a separate tender for each work Tender shall have the name and number of the work to which

they refer written outside the envelope

5 The General Manager-Works RTDC Ltd Jaipur or other duly authorized Engineer will open the tenders in the presence of

any intending contractors or their authorized representative who may be present at the time and will enter the amounts of the

several tenders in the Register of tenders in the event of the tender being accepted A receipt for the earnest money

forwarded therein shall there upon be given to the contractor who shall there-upon for the purpose of identification sign

copies of the specifications and other documents In the event of a tender being rejected the earnest money forwarded with

such unaccepted tender shall be returned to the contractor

6 The General Manager-Works RTDC Ltd Jaipur or other authorized Engineer shall have the right of rejecting all or any of

the tenders without assigning any reasons

7 The accompanying schedules of quantities in ldquoGrdquo Schedule are the architects estimated quantities for the work The

contractors shall attach histheir OWN prices for the each item in column for rates left blank and shall money out the same in

the final column amp totals HeThey shall fill up properly the form of tender and the schedule of quantities without adding any

stipulations thereto The tender shall show the total amount arrived at in the manner above described The tender Notice to

Contractors conditions of contract Specifications and the Schedule of quantities and rates etc shall all be embodied in and

shall form a part of the contract

8 The quantities contained in the Schedule are only approximately correct If more or less quantities are actually done on the

work the contractors shall be paid for the same at the rates tendered by himthem in the Schedule of Rates The work as

actually done will be measured by the contractors qualified engineer and bill furnished to the General Manager(Works)

RTDC Ltd Jaipur which in turn will get it checked by the Engineer in charge time to time and will be paid for as provided in

the Special Condition of Contract after deducting SD as per PWFampAR provisions

Signature of Contractor

9

GENERAL CONDITIONS OF CONTRACT 1 All the materials used shall be of approved quality and to the entire satisfaction of the General Manager-works RTDC Ltd

Jaipur

2 The General Manager-works RTDC Ltd Jaipur or the Engineer in charge reserves right for any additions and alternations or

omission in the tender and execution of works In case the Department supplies the material specified in the tender recovery for

the cost of supplied material from subsequent running Bill will be made

3 The Department shall pay to the contractor as detailed in special conditions of contract

4 The contractors isare to set out the work in accordance with the plans All lines to be accurately marked or otherwise to the

satisfaction of the Engineer in charge

5 The contractors shall meet the Engineer in charge or his representative at the works site whenever required

6 The contractors shall maintain and be represented on site at all times by a responsible and efficient EngineerArchitect who

thoroughly understands all the trades enrolled The Engineer in charge reserves the right to dismiss the Foremen and any

workmen who in his opinions are not sufficiently skilled or who neglect or refuse to obey instructions

7 The contractors shall be given one set of the plans free of charge

8 The General Manager-works RTDC Ltd Jaipur reserves the right of altering the drawings and nature of the work and adding

to or omitting any item of work or having portions of the same carried out departmentally or otherwise and such alterations or

variations shall be carried out without prejudice to the contract

9 The General Manager-works RTDC Ltd Jaipur reserves to the right to increase or decrease quantity of work or omit some part

of the work without violating the contract and for which he will not be held liable to compensation to the contractors

10 All plants machines and other equipments are to be arranged by contractor for the work

11 Any percentage rate tender containing item-wise rates and any item rate tender containing percentage rate below or above

estimatedscheduled rates will be summarily rejected

12 The Conditions of Contract shall govern sales tax or any other tax on materials or Income Tax in respect of the contract

Deduction of Income Tax at source will be made as per provisions of the Income Tax Act in force from time to time

13 If on check there are differences between the rate quoted by the Contractor in words and figures or in the amount worked out

by him the following procedure shall be followed -

(i) Where there is a difference between the rates in figures and words lower of the two rates shall be taken as valid and correct

rate

(ii) When the rate quoted by the contractor in figures and in words tallies but the amount is not worked out correctly the rate

quoted by the contractor shall be taken as correct and not the amount worked out

(iii) While quoting rates if raterates against any item or items are found to be omitted the rate given in the Schedule G by the

Department for such items will be taken into account while preparing comparative statement and contractor shall be bound to

execute such item on G Schedule rates

(iv) In case where percentage is given but the above or below not scored the tender will be non-responsive

14 The Contractor shall read the specifications and study the working drawings carefully before submitting the tender

15 After acceptance of the tender the Contractor or all partners (in the case of partnership firm) will append photographs and

signatures duly attested at the time of execution of agreement

16 Experience into similar nature of works for which tender invited and fulfill conditions of NIT

17 Contractors shall submit only unconditional tenders Conditional tenders are liable to be rejected similarly

Signature of Contractor

General Manager-Works

10

SPECIAL CONDITIONS OF CONTRACT

1 The Technical bid will be opened first on the day mentioned in the NIT Bidders will be evaluated as per norms set for

qualification in Technical bid and Financial bids of only those bidders will be opened which were qualify in the technical bid

2 Contractors bidding for the work should be reputed experienced contractors fulfilling the requirements laid down in the NIT

and well versed and working in the field Only those bidders will be considered qualified in the Technical bid who have

executed similar works to the tune of at least 13rd of the estimated value of the work (published in NIT) during last five

years (updated to current price level 100 per annum) and have the necessary technical expertise and support

machinery and administrative and financial capability to satisfactorily execute works in question for which they are bidding

3 The decision of the General Manager-works RTDC Ltd Jaipur or his representative on pre-qualification in the Technical bid

will be final amp binding

4 All raw materials will have to be brought to the site and all carving work will have to be executed only at site to qualify for

payment of running bills No payment of any material at or work done at place other than the site of work will be made

unless such material is brought to site and found acceptable to be used on the work

5 General conditions of contract special conditions of contract and specification of work as appended herewith in addition to

General condition of agreement will be applicable on this work In addition the PWD specifications will also be applicable

as relevant to the particular item of work

6 Work shall be carried out as per approved drawings and designs to be provided by the departmental architect engaged

7 Architectural work for the construction shall be of a high standard quality and pattern (class and style) to match the existing

work

8 All work shall be carried out as per approved samples of each element

9 The exposed surface of stonework will be suitably protected from damage disfigurement during the course of work and will

be cleaned and washed removing all spots etc for final acceptance on completion

10 All scaffolding shuttering TampP etc for the work shall have to be arranged by contractor at his own cost

11 The time for completion of work as given in the NIT shall be strictly adhered to and the work so planned as to be completed

within the scheduled period The contractor shall provide with a time schedule to the department for progressing with and

completing various stages of the work

12 Only best quality stone and other building materials shall be used in construction and all such material will be got approved

from the Engineer in-charge before use

13 Quantities of individual items can be increased invariably or even reduced withdrawn and specification and designs altered

at the discretion of Engineer in-charge and contractor will not be entitled to any compensation thereof for such alteration For

extra items if any rates will be decided based on market analysis to be provided by contractor

14 Contractor will give notice before any work is covered up Bad work will have to be redonereplaced at contractors cost

15 Full scale drawings form work for architectural stone work to be developed from drawings wherever necessary shall be got

prepared by contractor for prior approval before Signature of contractor

construction at his own cost and he will get these approved from the Engineer in-charge General Manager-Works RTDC

Ltd Jaipur who shall however be at liberty to modify such drawings form work and no extra payment shall be made for this

16 It will be the contractors responsibility to get the drawings formwork and sample of individual itemselements of work

approved from the departmental Architect Engineer before proceeding with manufacture of the same at site

17 The contractor shall provide adequate safety measures and proper insurance for his labour working at site and it shall be

done by contractor at his end Contractor shall settle all labour disputes at his own level The contractor shall observe all

labourfactory laws in force

18 Security deposit will be recovered from each running bill of contractor as per provisions of PWFampAR Earnest money will be

adjusted in the security deposit amount Security deposit shall be returned after one year satisfactory completion of the work

and on satisfactory performance of structure

19 No escalation will be payable even if the completion period exceeds that as stipulated

20 In case of unsatisfactory work by contractor or deliberate delaying the work without valid reasons the contract will be liable

to be terminated at the stage up to which acceptable work is done and paid for with no compensation of any sort payable to

contractor for withdrawal at that stage and possession of work executed at site will be taken over by Department In case of

any dispute the decision of the Department will be final and binding on the contractor

21 The bidder has to furnish with his technical bid (In prescribed Performarsquos Schedule 1-5)

Full information regarding financial resources and capability in Schedule-1 herewith(Photocopy to be made out of schedule)

a) Details of works of similar type and magnitude completed in last 5 years by the tenderer in Schedule II (Photocopy to be

made out of schedule)

b) Details of works bids and works to be completed in Schedule-III (Photocopy to be made out of schedule)

c) Details of technical supervisory personnel and master craftsman craftsman which he proposes to utilize for this work in

Schedule IV (Photocopy to be made out of schedule)

d) Details of plant and equipment proposed for use in the work in Schedule V (Photocopy to be made out of schedule)

11

e) The bidder should demonstrate that they have adequate financial resources (Over draft Credit Limit letter from bank)

Signature of Contractor

22 Bid capacity

(i) Bidders who meet the minimum qualifying criteria are to be evaluated further for Bid capacity as under -

(a) Maximum value of similar works executed in any one year during the last five years including current year (updated to the

current price level) extracted from schedule II which will take into account the completed and on going works

(b) Value of the existing commitments works (complete or partial) to be completed in the coming 12 months (up dated to the

current price level) Extracted from schedule III

(ii) Bid Capacity=(AxNx3-B) where

A=Maximum value of works executed in any one year during the last five years (updated to present price level) taking into

account the completed as well as works in progress

N=Number of years prescribed for completion of the works for which bids are invited herein (in years)

B=Value at present price level of existing commitments and on going works (at hand) to be executed during N period

The bidder will be post qualified only if his bid capacity is equal or more than the cost of work in question No contract may be

awarded to bidder lacking the financial and technical resources to undertake the work The decision of General Manager

(Works) Rajasthan Tourism Development Corporation Ltd Jaipur in this regard will be final and binding

NOTE -The present price level for turn over cost of completed works and amount of similar nature works (of a value at least 13rd of the estimated value of the work published in NIT during last five years) the previous years value shall be given weightage of 10 per year as following for the tendersbids invited by this department ndash

(a) For last year - 100 (b) For one year before - 110 (c) For two year before - 121 (d) For three year before - 133 (e) For four year before - 146

For current year the price level shall be 10

23 The right to qualify or not to qualify any or all the bidders without assigning any reason is reserved with the General Manager

(Works) Rajasthan Tourism Development Corporation Ltd Jaipur

24 Determination of Responsiveness

a) Prior to the detailed evaluation of bids the General Manager (Works) Rajasthan Tourism Development Corporation Ltd

JAIPUR will determine whether each bid is substantially responsive to the requirements of the bidding documents

b) For the purpose of this clause a substantially responsive bid is one which has required capacity capability and financial

resources and whose bid conforms to all the terms conditions and specifications of the bidding documents without

material deviation or reservation A material deviation or reservation is one which affects in any substantial way the

scope quality or performance of the works or which limits in any substantial way the General Manager (Works)

Rajasthan Tourism Development Corporation Ltd JAIPURrsquoS right or the Bidders obligations under the contract and the

rectification of which deviation or reservation would effect unfairly the competitive position of other bidders presenting

substantially responsive bids

c) if a bid is not substantially responsive to the requirements of the bidding documents it will be rejected and may not

subsequently be made responsive by the bidder having corrected or withdrawn the nonconforming deviation or

reservation

25 Construction programme ndash

1) Within the time stated in this contract the Contractor shall after the acceptance of his tender submit to the General Manager

(Works) Rajasthan Tourism Development Corporation Ltd JAIPUR for approval programme together with bar chart PERT

chart

2) proposed deployment of machinery etc showing the order of procedure in which he proposes to carryout the works The

contractor shall provide in writing general description the arrangements deployment of equipment work planning and

methods which he proposes to adopt for the execution of the works

3) If at any time it should appear to the Department that actual progress of the work does not conform to the approved

programme referred to in sub-clause (1) of this clause the Contractor shall produce at the request of the Department a

revised programme showing the modifications to the approved programme necessary to ensure completion of the works

within the time for completion

4) The submission to and approval by the Department of such programmers or the furnishing of such particulars shall not

relieve the contractor of any of his duties or responsibilities under the contract

5) The contractor shall submit within 30 days after the date of notice to proceed with the work a detailed construction

programme to suit the programme of completion for the entire contract period This programme shall be reviewed and

revised every half year at the beginning of the working season to plan timely action for making up the slippages occurred in

the previous season to suit the stipulated period of completion (including mile stones) as extended from time to time

26 Materials workmanship period and certificates of Maintenance and Defect Liability etc

All materials and workmanship shall be of the respective kinds described in the contract and in accordance with the

ArchitectsEngineer instructions and shall be subjected from time to time to such tests as the Engineer may direct at the

place of manufacture or fabrication or on the site or at such other place or places as may be specified in the Contract or at

all or any of such places The contractor shall install quality control laboratory and provide such assistance instruments

machines labour and materials as are normally required for examining measuring and test in any work and the quality

weight or quantity of any material used and shall supply samples of materials before incorporation in the works for testing as

may be selected and required by the Engineer-in-charge

12

Signature of Contractor

27 Period of maintenance and Defects liability

The Contractor shall be responsible to make good within such period as maybe stipulated by the Engineer in-charge any

defect which may develop or may be noticed during period of maintenance of 12 months from the certified date of

completion and which is attributable to the contractor All notice of such defect shall be given to the Contractor promptly In

case the contractor fails to make good the defects the Engineer in-charge may employ other persons to make good such

defects and all expenses consequent thereof and incidental thereto shall be recoverable from the Contractor In the event

the employer takes over portions of work as they are completed the liability of the contractor under this clause for these

portions shall extend to a period of 24 months from the actual dates on which portions of the works are taken over

28 The successful biddercontractor is required to undertake detailed photo recording documentation by still photography

videography of the entire work prior to commencement and the same has to be deposited with the Engineer in charge of

RAJASTHAN TOURISM DEVELOPMENT CORPORATION JAIPUR in two copies immediately Before dismantling any old

work to redo this still photography with specifically putting some identity mark number of the portion by any specified means

has to be done and this to be got checked and certified by Engineer In charge and recorded specifically in the measurement

book (MB) A written permission from the Engineer in charge before commencement of executing such work is essential for

execution as well as for payments

During the work in progress and after its completion also photo documentation is necessary and the photos before amp after

completion of portion of work are essentially to be enclosed with the bill for payment

Signature of Contractor

GENERAL MANAGER (WORKS)

13

SCHEDULE-I

FINANCIAL RESOURCES AND CAPABILITY

(PURSUANT TO CLAUSE 26) 1 Name of Applicant

2 Name of Partner Director

3 Capital

(a) Authorised

(b) ii

4 (a) WhetheCategory of Enlisted in Govt

(b) Details Details of the work completed and applicants performance record for last five years

(information to be furnished in Schedule II in India

(c) Details of works in hand applicants performance record for last five years (Information to be

furnished in Schedule-III)

5 Furnish Balance Sheet and profit and loss statement with auditorrsquos report for the last three years

6 The information on the following aspects should be specifically furnished

(i) Working capital and net worth

(ii) Turnover for the years

a

b

c

(iii) Gross income in years in India

(i)

(ii)

(iii)

(iv) Quick ratio or acid test ration (Quick assets to current liabilities)

7 What is the maximum annual turnover of the project that you can handle (Financial Projection)

8 Have you ever been denied tendering facilities by any Governmental DepartmentPublic Sector

undertaking

(If yes Please give details)

9 List of your source of finance

10 Certificate of financial soundness by Bank

11 Name and address of Bank from whom reference can be obtained

12 Have you ever been declared bankrupt

(if yes please give details)

Signature of Contractor

14

SCHEDULE-II WORKS OF SIMILAR MAGNITUDE TO THE WORK UNDER CONSIDERATION COMPLETED BY THE

APPLICANT IN LAST FIVE YEARS IN INDIA

(Pursuant to Clause 26)

SNo Na

me

of

wor

k

Place

amp

State

Tender

awardi

ng

Agency

Tender

ed Cost

Stipulate

d time of

Completi

on

Time in

which

complete

d

Date

of

comp

letion

Reason

for

Delay

Principal

features

of work

done

Value of

work done

1 2 3 4 5 6 7 8 9 10 11

Year

Year

Year

Signature of Contractor

15

SCHEDULE-III WORKS TENDERED FOR amp WORKS TO BE COMPLETED AS ON THE DATE OF SUBMISSION OF

APPLICATION IN INDIA

(pursuant Clause 26)

SNo Name

of

work

Place

amp

State

Work on Hand Work tendered for

Tender

Cost amp

Date

or

award

Stipulated

period of

Completion

Cost of

work

remaining

to be

executed

Antici

pated

Date

of

compl

eted

Estimate

d cost

(Rs In

Lakh)

Date

when

decisio

n

expecte

d

Stipulate

d Date

period of

Completi

on

Remar

ks

1 2 3 4 5 6 7 8 9 10 11

Year

Year

Year

Signature of Contractor

16

SCHEDULE- IV

Details of Key Personnel intended to be employed for this work

(use separate sheet if necessary)

(Pursuant to clause 26)

S No Name of Person Qualification Designation Experience Work to be

put on

A Technical Personnel

(1)

(2)

(3)

(4)

B Administrative Personnel

(1)

(2)

(3)

(4)

C Master Craftsmen

(1)

(2)

(3)

(4)

D Craftsmen

(1)

(2)

(3)

(4)

E Any other (1)

(2)

(3)

(4)

Signature of Contractor

17

SCHEDULE- V

DETAILS OF MAJOR ITEMS OF CONSTRUCTION PLANT AVAILABLE FOR THIS WORK

S No

Particulars Make Year of manufacture

Nos Whether owned or confirmed lease

1 Lime mortar Mill

2 Scaffolding Material

3 Movable Gantry

Crane etc

4 Any other TampP for

the purpose

5

6

7

8

Signature of Contractor

18

RAJASTHAN TOURISM DEVELOPMENT CORPORATION LIMITED JAIPUR

(WORKS DIVISION)

TENDER DOCUMENT (Financial Bid)

E-Tender (NIT No) 082016-17

Name of work- Pushkar Market Street- Restoration And Development Works

Restoration Conservation work Stained GssMirror

Signature of Contractor

19

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works

(Based on PWD BSR CIVILElectrical Ajmer Circle - 2013 and item rates)

SCHEDULE -G

GENERAL ABSTRACT

SNO WORK AMOUNT

1

PART A- CIVIL WORKS BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

304610000

2

PART B- SANITARY WORKS BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

5936400

3

PART C- HORTICULTURE BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

2627500

4

PART D-NON BSR ITEMS ( CIVIL AND ELECTRICAL)

GRAND TOTAL

I we hereby agree to execute the work PART A In figures Above Below In words

Above below PART B In figures Above Below In words

Above below PART C In figures Above Below In words

Above below PART D In figures Above Below In words

Above below

General Manager Works

RTDC Ltd Jaipur

Signature of the Contractor With Full Postal Address

20

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works

(Based on PWD BSR Civil Ajmer Circle - 2013)

PART A- CIVIL WORKS

SL No Specification Unit Rate QTY Amount

1

Surface Dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr and lift up to 15 Mtr All kinds of soil 100Sqm 437

26

11362

2

Surface Dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr and lift up to 15 Mtr All kinds of soil Cum 127

30

3810

3

Filling available excavated earth (excluding rock) in trenches plinth side of foundation etc in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift Cum 61

12 732

4

Providing and laying in position cement concrete including curing compaction etc complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level

M15 grade Nominal Mix (with graded stone aggregate 20mm nominal size) Cum

3438

230

790740

5

Random Rubble stone masonry for foundation and plinth in Cement Sand mortar above 30 CM thick wall in

21

Cement Mortar 13 ( 1-Cement 3-Sand) Cum

2193

35

76755

6

Random Rubble stone masonry for superstructure above plinth level one storey height above 30cm thick walls in

Cement Mortar 13 ( 1-Cement 3-Sand) Cum

2686

135

362610

7

Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor three level including curing compaction finishing with rendering in cement sand mortar 13 (1 cement 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement for -

Beams suspended floors roofs griders having slopes up to 15ordm landings balconies shelves chajjas lintels bands plain windows sills staircases and spiral staircases etc

M20 grade Nominal Mix

Cum 5138

45

231210

8

Centering amp shuttering with plywood or steel sheets including strutting propping bracing both ways with wooden members and removal of formwork for upto floor three level for

Suspended floors roofs landings staircases balconies girders cantilevers bands coping bed plates anchor blocks sills chhajjas lintel beam etc Sqm 222

60

13320

9

Providing and fabricating reinforcement using steel of SAILVIZAK-RINLTATA TISCONESSARZINDAL VIJAINAGAR IS 1786-1986 for RCC work including straightening cutting bending placing in position and binding (including cost of binding wire) all complete up to floor three level

22

Thermo-Mechanically Treated bars (Conforming of relevent IS code) Kg 78

2630

205140

10

Plaster on new surface on wall in cement sand mortar 13 including racking of joints etc complete fine finish

20mm thick Sqm 161

150

24150

11

6mm thick cement plaster to ceiling of mix 13 (1cement 3 fine sand) Sqm 105

25

2625

12

Polished Blue Kota Stone flooring skirting laid over 20mm thick base of CM 14 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete

13

For area of each slab from 2001 to 5000 SqCm

30mm thick slab

Sqm 988

35

34580

14

Wall Painting with plastic emulsion paint of approved brand and manufacture to give an even shade

Two or more coats on new work including preparation of base with primer putty lippy complete in all respect Sqm 82

76

6232

15

Applying Exterior Emulsion Paint like ACE APEX or equivalent brand and manufacture of required shade to give an even shade including all scaffolding on prepared surface (excluding water primer)

New Work (Two or more coats) Sqm 119

28

3332

16

Applying one coat of Asian Paints DECO Primer (Water thinnable) of approved brand amp manufacture ic scrapping by sand papering and preparing the even surface on wallwall putty as base for ACE APEX or APEX ULTIMA ic all scaffolding(New Surface) Sqm 24

104

2496

23

17

providing and fixing steel gategrating and grills made of anglesteessqure bars flats or blackpipe with holdfast and fitting complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide kg 83

1250

103750

Demolishing cement concrete including disposal of material with in 50 meter lead

136 or richer mix Cum 319

30

9570

148 or leaner mix Cum 311

20

6220

18

Demolishing RCC work manually by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge

Cum 1085

30

32550

19

Rough chisel dressed stone flooring over 20mm (Av) thick base in CM 16 including pointing with cement mortar 12 (1 cement 2 stone dust) with and admixture of pigment to match the shade of stone with joint thickness upto 15mm

45mm thick red sand stone

Sqm 385

230

88550

20

Providing and fixing 1st quality standard white grey ivory fume red brown light green light blue and other light shades glazed tiles confirming to IS 13753 amp IS 15622 of size 300mm x 200mm in walls floors steps pillars etc laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar)

Catogary-A Kajaria Johnson Somani Orient make Sqm 763

25

19075

24

21

Applying one coat industrial grade bitumen of penetration 2585 of approved quality using 170 kg per Sqm on Damp Proof Coarse after cleaning the surface with brushes and finally with a piece of cloth slightly soaked in kerosene oil Sqm 103

45

4635

22

Providing and Fixing 30 too 40 mm thickk stone chajjas in cement sand mortar 14 including making gola at junction with wall concrete M-15 grade (124 nominal mix drip course

20 mm thick plastering in CM 16 on both Sqm 645

35

22575

23

Providing and fixing steel gate grating and grills made of angles tees square bars flatsor black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide

Kg 83

9750

809250

24

Extra if squarerectangular hollow tubelar sections are used or grill made by flats only

Kg

10

6490

64251

P amp F bolts including nuts and bolts complete

Kg 57

240

13680

25

Painting with ready mix paint of approved brand and manufacture in all shades to give an even shade

New Steel Work Sqm 40

1500

60000

Welding by electric plant cmlength 286

15000

42900

TOTAL OF BSR WORKS CIVIL

3046100

25

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - B- SANITARY WORKS

SL No Specification Unit Rate QTY Amount

1

P amp F GI Pipes (External Work) with GI Fittings excluding union (IS 1239 Mark) including trenching amp refilling earth etc

40mm dia nominal bore A Class

Mtr 338

32 10816

25mm dia nominal bore A Class

Mtr 182

48 8736

2

Making connection of GI distribution Branch with GI main including all Fitting

Beyond 25mm amp upto 100mm dia Each 332 8 2656

3

P amp F Sand ndashcast Floor Trap (Nahni) of (IS1729 mark) of approved qualitymake with socket down or hinged grating including cutting and making good the floor- 100 x 100mm Each

421

4 1684

4

P amp F Gun-metal Full-way Valve (IS778 Mark) or wheel valve of approved make

Gun metal 25mm nominal bore Each 702 4 2808

Gun metal 40mm nominal bore Each 1065 4 4260

5

P amp F PVC Storage Tank ISI Marked (IS 12701) indicating the BIS license No) of approved make with cover 25mm dia 1M long GI over-flow pipe amp 25 Cm long wash out pipe with plug amp socket including making connection etc complete of approved design

1000 litres capacity Each 5437 4 21748

6

P amp F push cock superior quality of approved make

CP brass 15 mm

Each 416

16 6656

TOTAL 5936400

26

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - C-HOTICULTURE WORKS

SL No Specification Unit Rate QTY Amount

1

Supply of dry manure including loading unloading transportation amp stacking at site

Goat dungmanure

Cum

50000

35

17500

2

Supply amp Stacking good earth at site complete including loading unloading amp transportation etc Cum

7500

55

4125

3

Supply of different varities of treeshrubsclimbers according to height and age of the plant at site including loadingunloading amp transportation etc complete

Different flowing plants 900mm to 1500mm Each

1500

115

1725

4

Supply of different varities of bougainvillea in poly bagsearthen pots according to height growth amp age of plant at site including loadingunloading amp transportation etc complete

Local variety of bougainvillea 600 mm to 900mm Each

1500

75

1125

5

Digging pits in ordinary soil amp refilling the same with the excavated earth mixed with manure in the ratio 21 by volume (2 parts of stacked volume of earth after reduction by 20 1 parts of stacked volume of manure after reduction by 8) flooding with water and dressing including removal of surplus earth Each

1000

150

1500

27

(Cost of manure or extra good earth if needed to be paid separately) pit dia 60 cm X 60 cm deep

6

Spreading of manure and good earth in required thickness (cost of manure and good earth to be paid separately) Cum

400

75

300

TOTAL OF HORTICULTURE WORKS

26275

28

SCHEDULE OF QUANTITIES

Name of work Pushkar Market Street- Restoration And Development Works

(Based on item rates)

PART - D- NON SOR WORKS

SL No

Specification Unit Rate to

be Quoted

QTY

Amount

1

Providing and fixing fine dressed sand stoneapproved stone JALIas per existing matching geometrical design including moulding work with fine finishing fixing with thambli by proper adhesive and white cement with pigment including making groove etc complete in all respect

(b) 50mm thick Sqm 45

2

Providing amp fixing ashlar Rain water Spouts (3) lines dressed as per traditional practice existing design approved design size 60 x 30 x 25 cm fixing the rain water spout with lime surkhi mortar 12 with proper slope complete in all respect Each

12

3

Providing amp fixing ornamental stone cladding of approved sand stone with dressing complete as per existing designpatternapproved designfixing with 30mm thickgrinded lime surkhi mortar 12 amp pointing with white cement with araldite and pigment to match shade the stone complete in all respect as per direction of Engineer incharge(75mm thick) Sqm

54

4

Providing and fixing fine dressed sand stone Dasacoping as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect

(c) 75mm to 100mm thick with pan patti design Sqm 320

5

Providing and fixing fine dressed sand stone Cladding (Plain dressing only) as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect including removal of damaged cladding

(a) 50mm to 60mm thick Sqm 180

6

Supply and istallation whiteredapproved shade sandstone dustbin of size 800 mm x 450 mm and height 850 mm with hollow center to hang MS Dustbin of size 400mmx 500mmx 600 mm made of 1mm thick metal sheet fixed to stone pillars with MS chain edged with 50x50x5 mm angle sections including cutting welding and fabrication with priming coat of red oxide and approved ready mix paint of approved shadeStone peices joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 26

29

7

Supply and istallation of RedWhiteapproved shade stone bench of size 1500mmx450mmx450 mm horizontal stone members of size 300mmx400mmx450mm on two sides supporting the horizontal seating stone of 150 mm thickness fixed to vertical stone members joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 35

8

Poviding fixing testing and commisioning of Stainless Steel body bull Storage Capacity in (litres) 150 bull Nominal Cooling Capacity (Litreshr) 150 bull No Of Faucets 2 bull Dimensions 820W x 700D x 1235 H bull Normal Demand (glasses hr) 750 bull Refrigerant R-22 bull Current (Amps) 749 bull Water Overflow (Connections) 12 BSP bull Type Of Compressor Rotary Model No- SDLX15150A make Blue star or similar in make of VoltasOasis

Each 4

9

Providing fixing testing and commissioning of water purification system having auto shut-off e-boiling Voltage Stabilizer bull Type of Treatment- sediment filter active carbon cartridge mineral guard UV chamber bull water flow rate 3ltrminbull ultra- violet lamp of 16 watts bull power rating of 35watt bull Dimensions 355H x 1025D x 307WModel ndash Hi fio Make Eureka Forbes- aquagard or similar in make of livpurekent

Each 4

10

Demolishion of the existing bituminous road surface to a depth of 150 mm and disposal of demolished material with a lift upto 3 m and lead upto 1000 m

Sqm 50

11

Providing and fixing fine dressed sand stone flooring with white sand stone (Bansh paharpurdholpur stone) (panji marked surface) machine cut of approved shade set in pattern over 30mm thick base in cement mortar 16 including pointing with cement mortar 12 (1 cement2 stone dust) mixed with pigment to match the shade of stone with joint thickness upto 5 mm as per existing flloringsample approved by the consultantapproved by (75mm thick)

Sqm 730

12

Providing and Fixing Cobbles stone of lime sand stone size 100X100MM and theakness of 70 to100mm on path way open court yards of color shade approved by the consultant over cement mortar 13 ( 1 cement3 course sand) keeping 10mm joint between cobbles filled with cement mortar 13 ( 1 cement3 course sand) the mortar should remain recessed by 5mm from the top surface of the cobble stone complete in all respects as per design and details provided by the consultant

Sqm 1650

13

Supply and installation of sanstone signage 450x200 mm of redwhiteapproved shade Sandstone 75 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete with fixing with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 6

30

14

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 450mmx2400mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved with ornamentation in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

15

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 650mmx1200mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

16

Heritage signage shall be etched on to Dulmera stone plaque of size 18m x 14m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 4

17

Signage shall be etched on to Dulmera stone plaque of size 18m x 10m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 12

18

Providing and fixing MS steel sheets 3 mm thickness on to MS anfgles flats tees and hollow sections with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Kg 10640

19

Providing and fixing MS perforated sheets 3 mm thickness with diamondround shaped perforations as per sample approved by the consultant with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Sqm 90

20

Painting of shop signages with lettering in hindienglish and ornamental design patterns in ready mix paint of approved brand and manfacture in all shades to give an even shade as per drawings and details provided by the consultant

Sqm 560

21

Flush pointing over joints of dressed stone cladding chajjas jali etc with neat cement sand amp colour including racking the joints as per Jodhpur practice including all leads and lifts with grinded mortar of lime putty and stone powder mixed in 11 ratio and gur methi gugal etc are to be mixed as per old traditional practice

Sqm 75

22

Khamira Colour Washing as per old traditional practice to prepare the Khamira the lime should be slaked at least for 7-10 days and regularly it should be stirred by adding cured Gugal for non-synthetic colour adding gum (babool gum) as per specificationThen applying prepared solution on walls three to four thin coats as desired finishing

Sqm 1750

31

23

Providing amp applying Lime kara 12 (1lime cream 2 Zikki powder) grinding mortar with grinding millmanually on lime baseon all flat surface in two coatsFirst coat applying 3mm to 4mm thick and curing properly at least 7 dayssecond finishing coat done after 7days of previous coat as per traditional practice(thickness not more than 6 mm)

Sqm 155

TOTAL OF NON SOR WORKS

9

GENERAL CONDITIONS OF CONTRACT 1 All the materials used shall be of approved quality and to the entire satisfaction of the General Manager-works RTDC Ltd

Jaipur

2 The General Manager-works RTDC Ltd Jaipur or the Engineer in charge reserves right for any additions and alternations or

omission in the tender and execution of works In case the Department supplies the material specified in the tender recovery for

the cost of supplied material from subsequent running Bill will be made

3 The Department shall pay to the contractor as detailed in special conditions of contract

4 The contractors isare to set out the work in accordance with the plans All lines to be accurately marked or otherwise to the

satisfaction of the Engineer in charge

5 The contractors shall meet the Engineer in charge or his representative at the works site whenever required

6 The contractors shall maintain and be represented on site at all times by a responsible and efficient EngineerArchitect who

thoroughly understands all the trades enrolled The Engineer in charge reserves the right to dismiss the Foremen and any

workmen who in his opinions are not sufficiently skilled or who neglect or refuse to obey instructions

7 The contractors shall be given one set of the plans free of charge

8 The General Manager-works RTDC Ltd Jaipur reserves the right of altering the drawings and nature of the work and adding

to or omitting any item of work or having portions of the same carried out departmentally or otherwise and such alterations or

variations shall be carried out without prejudice to the contract

9 The General Manager-works RTDC Ltd Jaipur reserves to the right to increase or decrease quantity of work or omit some part

of the work without violating the contract and for which he will not be held liable to compensation to the contractors

10 All plants machines and other equipments are to be arranged by contractor for the work

11 Any percentage rate tender containing item-wise rates and any item rate tender containing percentage rate below or above

estimatedscheduled rates will be summarily rejected

12 The Conditions of Contract shall govern sales tax or any other tax on materials or Income Tax in respect of the contract

Deduction of Income Tax at source will be made as per provisions of the Income Tax Act in force from time to time

13 If on check there are differences between the rate quoted by the Contractor in words and figures or in the amount worked out

by him the following procedure shall be followed -

(i) Where there is a difference between the rates in figures and words lower of the two rates shall be taken as valid and correct

rate

(ii) When the rate quoted by the contractor in figures and in words tallies but the amount is not worked out correctly the rate

quoted by the contractor shall be taken as correct and not the amount worked out

(iii) While quoting rates if raterates against any item or items are found to be omitted the rate given in the Schedule G by the

Department for such items will be taken into account while preparing comparative statement and contractor shall be bound to

execute such item on G Schedule rates

(iv) In case where percentage is given but the above or below not scored the tender will be non-responsive

14 The Contractor shall read the specifications and study the working drawings carefully before submitting the tender

15 After acceptance of the tender the Contractor or all partners (in the case of partnership firm) will append photographs and

signatures duly attested at the time of execution of agreement

16 Experience into similar nature of works for which tender invited and fulfill conditions of NIT

17 Contractors shall submit only unconditional tenders Conditional tenders are liable to be rejected similarly

Signature of Contractor

General Manager-Works

10

SPECIAL CONDITIONS OF CONTRACT

1 The Technical bid will be opened first on the day mentioned in the NIT Bidders will be evaluated as per norms set for

qualification in Technical bid and Financial bids of only those bidders will be opened which were qualify in the technical bid

2 Contractors bidding for the work should be reputed experienced contractors fulfilling the requirements laid down in the NIT

and well versed and working in the field Only those bidders will be considered qualified in the Technical bid who have

executed similar works to the tune of at least 13rd of the estimated value of the work (published in NIT) during last five

years (updated to current price level 100 per annum) and have the necessary technical expertise and support

machinery and administrative and financial capability to satisfactorily execute works in question for which they are bidding

3 The decision of the General Manager-works RTDC Ltd Jaipur or his representative on pre-qualification in the Technical bid

will be final amp binding

4 All raw materials will have to be brought to the site and all carving work will have to be executed only at site to qualify for

payment of running bills No payment of any material at or work done at place other than the site of work will be made

unless such material is brought to site and found acceptable to be used on the work

5 General conditions of contract special conditions of contract and specification of work as appended herewith in addition to

General condition of agreement will be applicable on this work In addition the PWD specifications will also be applicable

as relevant to the particular item of work

6 Work shall be carried out as per approved drawings and designs to be provided by the departmental architect engaged

7 Architectural work for the construction shall be of a high standard quality and pattern (class and style) to match the existing

work

8 All work shall be carried out as per approved samples of each element

9 The exposed surface of stonework will be suitably protected from damage disfigurement during the course of work and will

be cleaned and washed removing all spots etc for final acceptance on completion

10 All scaffolding shuttering TampP etc for the work shall have to be arranged by contractor at his own cost

11 The time for completion of work as given in the NIT shall be strictly adhered to and the work so planned as to be completed

within the scheduled period The contractor shall provide with a time schedule to the department for progressing with and

completing various stages of the work

12 Only best quality stone and other building materials shall be used in construction and all such material will be got approved

from the Engineer in-charge before use

13 Quantities of individual items can be increased invariably or even reduced withdrawn and specification and designs altered

at the discretion of Engineer in-charge and contractor will not be entitled to any compensation thereof for such alteration For

extra items if any rates will be decided based on market analysis to be provided by contractor

14 Contractor will give notice before any work is covered up Bad work will have to be redonereplaced at contractors cost

15 Full scale drawings form work for architectural stone work to be developed from drawings wherever necessary shall be got

prepared by contractor for prior approval before Signature of contractor

construction at his own cost and he will get these approved from the Engineer in-charge General Manager-Works RTDC

Ltd Jaipur who shall however be at liberty to modify such drawings form work and no extra payment shall be made for this

16 It will be the contractors responsibility to get the drawings formwork and sample of individual itemselements of work

approved from the departmental Architect Engineer before proceeding with manufacture of the same at site

17 The contractor shall provide adequate safety measures and proper insurance for his labour working at site and it shall be

done by contractor at his end Contractor shall settle all labour disputes at his own level The contractor shall observe all

labourfactory laws in force

18 Security deposit will be recovered from each running bill of contractor as per provisions of PWFampAR Earnest money will be

adjusted in the security deposit amount Security deposit shall be returned after one year satisfactory completion of the work

and on satisfactory performance of structure

19 No escalation will be payable even if the completion period exceeds that as stipulated

20 In case of unsatisfactory work by contractor or deliberate delaying the work without valid reasons the contract will be liable

to be terminated at the stage up to which acceptable work is done and paid for with no compensation of any sort payable to

contractor for withdrawal at that stage and possession of work executed at site will be taken over by Department In case of

any dispute the decision of the Department will be final and binding on the contractor

21 The bidder has to furnish with his technical bid (In prescribed Performarsquos Schedule 1-5)

Full information regarding financial resources and capability in Schedule-1 herewith(Photocopy to be made out of schedule)

a) Details of works of similar type and magnitude completed in last 5 years by the tenderer in Schedule II (Photocopy to be

made out of schedule)

b) Details of works bids and works to be completed in Schedule-III (Photocopy to be made out of schedule)

c) Details of technical supervisory personnel and master craftsman craftsman which he proposes to utilize for this work in

Schedule IV (Photocopy to be made out of schedule)

d) Details of plant and equipment proposed for use in the work in Schedule V (Photocopy to be made out of schedule)

11

e) The bidder should demonstrate that they have adequate financial resources (Over draft Credit Limit letter from bank)

Signature of Contractor

22 Bid capacity

(i) Bidders who meet the minimum qualifying criteria are to be evaluated further for Bid capacity as under -

(a) Maximum value of similar works executed in any one year during the last five years including current year (updated to the

current price level) extracted from schedule II which will take into account the completed and on going works

(b) Value of the existing commitments works (complete or partial) to be completed in the coming 12 months (up dated to the

current price level) Extracted from schedule III

(ii) Bid Capacity=(AxNx3-B) where

A=Maximum value of works executed in any one year during the last five years (updated to present price level) taking into

account the completed as well as works in progress

N=Number of years prescribed for completion of the works for which bids are invited herein (in years)

B=Value at present price level of existing commitments and on going works (at hand) to be executed during N period

The bidder will be post qualified only if his bid capacity is equal or more than the cost of work in question No contract may be

awarded to bidder lacking the financial and technical resources to undertake the work The decision of General Manager

(Works) Rajasthan Tourism Development Corporation Ltd Jaipur in this regard will be final and binding

NOTE -The present price level for turn over cost of completed works and amount of similar nature works (of a value at least 13rd of the estimated value of the work published in NIT during last five years) the previous years value shall be given weightage of 10 per year as following for the tendersbids invited by this department ndash

(a) For last year - 100 (b) For one year before - 110 (c) For two year before - 121 (d) For three year before - 133 (e) For four year before - 146

For current year the price level shall be 10

23 The right to qualify or not to qualify any or all the bidders without assigning any reason is reserved with the General Manager

(Works) Rajasthan Tourism Development Corporation Ltd Jaipur

24 Determination of Responsiveness

a) Prior to the detailed evaluation of bids the General Manager (Works) Rajasthan Tourism Development Corporation Ltd

JAIPUR will determine whether each bid is substantially responsive to the requirements of the bidding documents

b) For the purpose of this clause a substantially responsive bid is one which has required capacity capability and financial

resources and whose bid conforms to all the terms conditions and specifications of the bidding documents without

material deviation or reservation A material deviation or reservation is one which affects in any substantial way the

scope quality or performance of the works or which limits in any substantial way the General Manager (Works)

Rajasthan Tourism Development Corporation Ltd JAIPURrsquoS right or the Bidders obligations under the contract and the

rectification of which deviation or reservation would effect unfairly the competitive position of other bidders presenting

substantially responsive bids

c) if a bid is not substantially responsive to the requirements of the bidding documents it will be rejected and may not

subsequently be made responsive by the bidder having corrected or withdrawn the nonconforming deviation or

reservation

25 Construction programme ndash

1) Within the time stated in this contract the Contractor shall after the acceptance of his tender submit to the General Manager

(Works) Rajasthan Tourism Development Corporation Ltd JAIPUR for approval programme together with bar chart PERT

chart

2) proposed deployment of machinery etc showing the order of procedure in which he proposes to carryout the works The

contractor shall provide in writing general description the arrangements deployment of equipment work planning and

methods which he proposes to adopt for the execution of the works

3) If at any time it should appear to the Department that actual progress of the work does not conform to the approved

programme referred to in sub-clause (1) of this clause the Contractor shall produce at the request of the Department a

revised programme showing the modifications to the approved programme necessary to ensure completion of the works

within the time for completion

4) The submission to and approval by the Department of such programmers or the furnishing of such particulars shall not

relieve the contractor of any of his duties or responsibilities under the contract

5) The contractor shall submit within 30 days after the date of notice to proceed with the work a detailed construction

programme to suit the programme of completion for the entire contract period This programme shall be reviewed and

revised every half year at the beginning of the working season to plan timely action for making up the slippages occurred in

the previous season to suit the stipulated period of completion (including mile stones) as extended from time to time

26 Materials workmanship period and certificates of Maintenance and Defect Liability etc

All materials and workmanship shall be of the respective kinds described in the contract and in accordance with the

ArchitectsEngineer instructions and shall be subjected from time to time to such tests as the Engineer may direct at the

place of manufacture or fabrication or on the site or at such other place or places as may be specified in the Contract or at

all or any of such places The contractor shall install quality control laboratory and provide such assistance instruments

machines labour and materials as are normally required for examining measuring and test in any work and the quality

weight or quantity of any material used and shall supply samples of materials before incorporation in the works for testing as

may be selected and required by the Engineer-in-charge

12

Signature of Contractor

27 Period of maintenance and Defects liability

The Contractor shall be responsible to make good within such period as maybe stipulated by the Engineer in-charge any

defect which may develop or may be noticed during period of maintenance of 12 months from the certified date of

completion and which is attributable to the contractor All notice of such defect shall be given to the Contractor promptly In

case the contractor fails to make good the defects the Engineer in-charge may employ other persons to make good such

defects and all expenses consequent thereof and incidental thereto shall be recoverable from the Contractor In the event

the employer takes over portions of work as they are completed the liability of the contractor under this clause for these

portions shall extend to a period of 24 months from the actual dates on which portions of the works are taken over

28 The successful biddercontractor is required to undertake detailed photo recording documentation by still photography

videography of the entire work prior to commencement and the same has to be deposited with the Engineer in charge of

RAJASTHAN TOURISM DEVELOPMENT CORPORATION JAIPUR in two copies immediately Before dismantling any old

work to redo this still photography with specifically putting some identity mark number of the portion by any specified means

has to be done and this to be got checked and certified by Engineer In charge and recorded specifically in the measurement

book (MB) A written permission from the Engineer in charge before commencement of executing such work is essential for

execution as well as for payments

During the work in progress and after its completion also photo documentation is necessary and the photos before amp after

completion of portion of work are essentially to be enclosed with the bill for payment

Signature of Contractor

GENERAL MANAGER (WORKS)

13

SCHEDULE-I

FINANCIAL RESOURCES AND CAPABILITY

(PURSUANT TO CLAUSE 26) 1 Name of Applicant

2 Name of Partner Director

3 Capital

(a) Authorised

(b) ii

4 (a) WhetheCategory of Enlisted in Govt

(b) Details Details of the work completed and applicants performance record for last five years

(information to be furnished in Schedule II in India

(c) Details of works in hand applicants performance record for last five years (Information to be

furnished in Schedule-III)

5 Furnish Balance Sheet and profit and loss statement with auditorrsquos report for the last three years

6 The information on the following aspects should be specifically furnished

(i) Working capital and net worth

(ii) Turnover for the years

a

b

c

(iii) Gross income in years in India

(i)

(ii)

(iii)

(iv) Quick ratio or acid test ration (Quick assets to current liabilities)

7 What is the maximum annual turnover of the project that you can handle (Financial Projection)

8 Have you ever been denied tendering facilities by any Governmental DepartmentPublic Sector

undertaking

(If yes Please give details)

9 List of your source of finance

10 Certificate of financial soundness by Bank

11 Name and address of Bank from whom reference can be obtained

12 Have you ever been declared bankrupt

(if yes please give details)

Signature of Contractor

14

SCHEDULE-II WORKS OF SIMILAR MAGNITUDE TO THE WORK UNDER CONSIDERATION COMPLETED BY THE

APPLICANT IN LAST FIVE YEARS IN INDIA

(Pursuant to Clause 26)

SNo Na

me

of

wor

k

Place

amp

State

Tender

awardi

ng

Agency

Tender

ed Cost

Stipulate

d time of

Completi

on

Time in

which

complete

d

Date

of

comp

letion

Reason

for

Delay

Principal

features

of work

done

Value of

work done

1 2 3 4 5 6 7 8 9 10 11

Year

Year

Year

Signature of Contractor

15

SCHEDULE-III WORKS TENDERED FOR amp WORKS TO BE COMPLETED AS ON THE DATE OF SUBMISSION OF

APPLICATION IN INDIA

(pursuant Clause 26)

SNo Name

of

work

Place

amp

State

Work on Hand Work tendered for

Tender

Cost amp

Date

or

award

Stipulated

period of

Completion

Cost of

work

remaining

to be

executed

Antici

pated

Date

of

compl

eted

Estimate

d cost

(Rs In

Lakh)

Date

when

decisio

n

expecte

d

Stipulate

d Date

period of

Completi

on

Remar

ks

1 2 3 4 5 6 7 8 9 10 11

Year

Year

Year

Signature of Contractor

16

SCHEDULE- IV

Details of Key Personnel intended to be employed for this work

(use separate sheet if necessary)

(Pursuant to clause 26)

S No Name of Person Qualification Designation Experience Work to be

put on

A Technical Personnel

(1)

(2)

(3)

(4)

B Administrative Personnel

(1)

(2)

(3)

(4)

C Master Craftsmen

(1)

(2)

(3)

(4)

D Craftsmen

(1)

(2)

(3)

(4)

E Any other (1)

(2)

(3)

(4)

Signature of Contractor

17

SCHEDULE- V

DETAILS OF MAJOR ITEMS OF CONSTRUCTION PLANT AVAILABLE FOR THIS WORK

S No

Particulars Make Year of manufacture

Nos Whether owned or confirmed lease

1 Lime mortar Mill

2 Scaffolding Material

3 Movable Gantry

Crane etc

4 Any other TampP for

the purpose

5

6

7

8

Signature of Contractor

18

RAJASTHAN TOURISM DEVELOPMENT CORPORATION LIMITED JAIPUR

(WORKS DIVISION)

TENDER DOCUMENT (Financial Bid)

E-Tender (NIT No) 082016-17

Name of work- Pushkar Market Street- Restoration And Development Works

Restoration Conservation work Stained GssMirror

Signature of Contractor

19

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works

(Based on PWD BSR CIVILElectrical Ajmer Circle - 2013 and item rates)

SCHEDULE -G

GENERAL ABSTRACT

SNO WORK AMOUNT

1

PART A- CIVIL WORKS BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

304610000

2

PART B- SANITARY WORKS BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

5936400

3

PART C- HORTICULTURE BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

2627500

4

PART D-NON BSR ITEMS ( CIVIL AND ELECTRICAL)

GRAND TOTAL

I we hereby agree to execute the work PART A In figures Above Below In words

Above below PART B In figures Above Below In words

Above below PART C In figures Above Below In words

Above below PART D In figures Above Below In words

Above below

General Manager Works

RTDC Ltd Jaipur

Signature of the Contractor With Full Postal Address

20

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works

(Based on PWD BSR Civil Ajmer Circle - 2013)

PART A- CIVIL WORKS

SL No Specification Unit Rate QTY Amount

1

Surface Dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr and lift up to 15 Mtr All kinds of soil 100Sqm 437

26

11362

2

Surface Dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr and lift up to 15 Mtr All kinds of soil Cum 127

30

3810

3

Filling available excavated earth (excluding rock) in trenches plinth side of foundation etc in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift Cum 61

12 732

4

Providing and laying in position cement concrete including curing compaction etc complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level

M15 grade Nominal Mix (with graded stone aggregate 20mm nominal size) Cum

3438

230

790740

5

Random Rubble stone masonry for foundation and plinth in Cement Sand mortar above 30 CM thick wall in

21

Cement Mortar 13 ( 1-Cement 3-Sand) Cum

2193

35

76755

6

Random Rubble stone masonry for superstructure above plinth level one storey height above 30cm thick walls in

Cement Mortar 13 ( 1-Cement 3-Sand) Cum

2686

135

362610

7

Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor three level including curing compaction finishing with rendering in cement sand mortar 13 (1 cement 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement for -

Beams suspended floors roofs griders having slopes up to 15ordm landings balconies shelves chajjas lintels bands plain windows sills staircases and spiral staircases etc

M20 grade Nominal Mix

Cum 5138

45

231210

8

Centering amp shuttering with plywood or steel sheets including strutting propping bracing both ways with wooden members and removal of formwork for upto floor three level for

Suspended floors roofs landings staircases balconies girders cantilevers bands coping bed plates anchor blocks sills chhajjas lintel beam etc Sqm 222

60

13320

9

Providing and fabricating reinforcement using steel of SAILVIZAK-RINLTATA TISCONESSARZINDAL VIJAINAGAR IS 1786-1986 for RCC work including straightening cutting bending placing in position and binding (including cost of binding wire) all complete up to floor three level

22

Thermo-Mechanically Treated bars (Conforming of relevent IS code) Kg 78

2630

205140

10

Plaster on new surface on wall in cement sand mortar 13 including racking of joints etc complete fine finish

20mm thick Sqm 161

150

24150

11

6mm thick cement plaster to ceiling of mix 13 (1cement 3 fine sand) Sqm 105

25

2625

12

Polished Blue Kota Stone flooring skirting laid over 20mm thick base of CM 14 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete

13

For area of each slab from 2001 to 5000 SqCm

30mm thick slab

Sqm 988

35

34580

14

Wall Painting with plastic emulsion paint of approved brand and manufacture to give an even shade

Two or more coats on new work including preparation of base with primer putty lippy complete in all respect Sqm 82

76

6232

15

Applying Exterior Emulsion Paint like ACE APEX or equivalent brand and manufacture of required shade to give an even shade including all scaffolding on prepared surface (excluding water primer)

New Work (Two or more coats) Sqm 119

28

3332

16

Applying one coat of Asian Paints DECO Primer (Water thinnable) of approved brand amp manufacture ic scrapping by sand papering and preparing the even surface on wallwall putty as base for ACE APEX or APEX ULTIMA ic all scaffolding(New Surface) Sqm 24

104

2496

23

17

providing and fixing steel gategrating and grills made of anglesteessqure bars flats or blackpipe with holdfast and fitting complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide kg 83

1250

103750

Demolishing cement concrete including disposal of material with in 50 meter lead

136 or richer mix Cum 319

30

9570

148 or leaner mix Cum 311

20

6220

18

Demolishing RCC work manually by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge

Cum 1085

30

32550

19

Rough chisel dressed stone flooring over 20mm (Av) thick base in CM 16 including pointing with cement mortar 12 (1 cement 2 stone dust) with and admixture of pigment to match the shade of stone with joint thickness upto 15mm

45mm thick red sand stone

Sqm 385

230

88550

20

Providing and fixing 1st quality standard white grey ivory fume red brown light green light blue and other light shades glazed tiles confirming to IS 13753 amp IS 15622 of size 300mm x 200mm in walls floors steps pillars etc laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar)

Catogary-A Kajaria Johnson Somani Orient make Sqm 763

25

19075

24

21

Applying one coat industrial grade bitumen of penetration 2585 of approved quality using 170 kg per Sqm on Damp Proof Coarse after cleaning the surface with brushes and finally with a piece of cloth slightly soaked in kerosene oil Sqm 103

45

4635

22

Providing and Fixing 30 too 40 mm thickk stone chajjas in cement sand mortar 14 including making gola at junction with wall concrete M-15 grade (124 nominal mix drip course

20 mm thick plastering in CM 16 on both Sqm 645

35

22575

23

Providing and fixing steel gate grating and grills made of angles tees square bars flatsor black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide

Kg 83

9750

809250

24

Extra if squarerectangular hollow tubelar sections are used or grill made by flats only

Kg

10

6490

64251

P amp F bolts including nuts and bolts complete

Kg 57

240

13680

25

Painting with ready mix paint of approved brand and manufacture in all shades to give an even shade

New Steel Work Sqm 40

1500

60000

Welding by electric plant cmlength 286

15000

42900

TOTAL OF BSR WORKS CIVIL

3046100

25

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - B- SANITARY WORKS

SL No Specification Unit Rate QTY Amount

1

P amp F GI Pipes (External Work) with GI Fittings excluding union (IS 1239 Mark) including trenching amp refilling earth etc

40mm dia nominal bore A Class

Mtr 338

32 10816

25mm dia nominal bore A Class

Mtr 182

48 8736

2

Making connection of GI distribution Branch with GI main including all Fitting

Beyond 25mm amp upto 100mm dia Each 332 8 2656

3

P amp F Sand ndashcast Floor Trap (Nahni) of (IS1729 mark) of approved qualitymake with socket down or hinged grating including cutting and making good the floor- 100 x 100mm Each

421

4 1684

4

P amp F Gun-metal Full-way Valve (IS778 Mark) or wheel valve of approved make

Gun metal 25mm nominal bore Each 702 4 2808

Gun metal 40mm nominal bore Each 1065 4 4260

5

P amp F PVC Storage Tank ISI Marked (IS 12701) indicating the BIS license No) of approved make with cover 25mm dia 1M long GI over-flow pipe amp 25 Cm long wash out pipe with plug amp socket including making connection etc complete of approved design

1000 litres capacity Each 5437 4 21748

6

P amp F push cock superior quality of approved make

CP brass 15 mm

Each 416

16 6656

TOTAL 5936400

26

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - C-HOTICULTURE WORKS

SL No Specification Unit Rate QTY Amount

1

Supply of dry manure including loading unloading transportation amp stacking at site

Goat dungmanure

Cum

50000

35

17500

2

Supply amp Stacking good earth at site complete including loading unloading amp transportation etc Cum

7500

55

4125

3

Supply of different varities of treeshrubsclimbers according to height and age of the plant at site including loadingunloading amp transportation etc complete

Different flowing plants 900mm to 1500mm Each

1500

115

1725

4

Supply of different varities of bougainvillea in poly bagsearthen pots according to height growth amp age of plant at site including loadingunloading amp transportation etc complete

Local variety of bougainvillea 600 mm to 900mm Each

1500

75

1125

5

Digging pits in ordinary soil amp refilling the same with the excavated earth mixed with manure in the ratio 21 by volume (2 parts of stacked volume of earth after reduction by 20 1 parts of stacked volume of manure after reduction by 8) flooding with water and dressing including removal of surplus earth Each

1000

150

1500

27

(Cost of manure or extra good earth if needed to be paid separately) pit dia 60 cm X 60 cm deep

6

Spreading of manure and good earth in required thickness (cost of manure and good earth to be paid separately) Cum

400

75

300

TOTAL OF HORTICULTURE WORKS

26275

28

SCHEDULE OF QUANTITIES

Name of work Pushkar Market Street- Restoration And Development Works

(Based on item rates)

PART - D- NON SOR WORKS

SL No

Specification Unit Rate to

be Quoted

QTY

Amount

1

Providing and fixing fine dressed sand stoneapproved stone JALIas per existing matching geometrical design including moulding work with fine finishing fixing with thambli by proper adhesive and white cement with pigment including making groove etc complete in all respect

(b) 50mm thick Sqm 45

2

Providing amp fixing ashlar Rain water Spouts (3) lines dressed as per traditional practice existing design approved design size 60 x 30 x 25 cm fixing the rain water spout with lime surkhi mortar 12 with proper slope complete in all respect Each

12

3

Providing amp fixing ornamental stone cladding of approved sand stone with dressing complete as per existing designpatternapproved designfixing with 30mm thickgrinded lime surkhi mortar 12 amp pointing with white cement with araldite and pigment to match shade the stone complete in all respect as per direction of Engineer incharge(75mm thick) Sqm

54

4

Providing and fixing fine dressed sand stone Dasacoping as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect

(c) 75mm to 100mm thick with pan patti design Sqm 320

5

Providing and fixing fine dressed sand stone Cladding (Plain dressing only) as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect including removal of damaged cladding

(a) 50mm to 60mm thick Sqm 180

6

Supply and istallation whiteredapproved shade sandstone dustbin of size 800 mm x 450 mm and height 850 mm with hollow center to hang MS Dustbin of size 400mmx 500mmx 600 mm made of 1mm thick metal sheet fixed to stone pillars with MS chain edged with 50x50x5 mm angle sections including cutting welding and fabrication with priming coat of red oxide and approved ready mix paint of approved shadeStone peices joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 26

29

7

Supply and istallation of RedWhiteapproved shade stone bench of size 1500mmx450mmx450 mm horizontal stone members of size 300mmx400mmx450mm on two sides supporting the horizontal seating stone of 150 mm thickness fixed to vertical stone members joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 35

8

Poviding fixing testing and commisioning of Stainless Steel body bull Storage Capacity in (litres) 150 bull Nominal Cooling Capacity (Litreshr) 150 bull No Of Faucets 2 bull Dimensions 820W x 700D x 1235 H bull Normal Demand (glasses hr) 750 bull Refrigerant R-22 bull Current (Amps) 749 bull Water Overflow (Connections) 12 BSP bull Type Of Compressor Rotary Model No- SDLX15150A make Blue star or similar in make of VoltasOasis

Each 4

9

Providing fixing testing and commissioning of water purification system having auto shut-off e-boiling Voltage Stabilizer bull Type of Treatment- sediment filter active carbon cartridge mineral guard UV chamber bull water flow rate 3ltrminbull ultra- violet lamp of 16 watts bull power rating of 35watt bull Dimensions 355H x 1025D x 307WModel ndash Hi fio Make Eureka Forbes- aquagard or similar in make of livpurekent

Each 4

10

Demolishion of the existing bituminous road surface to a depth of 150 mm and disposal of demolished material with a lift upto 3 m and lead upto 1000 m

Sqm 50

11

Providing and fixing fine dressed sand stone flooring with white sand stone (Bansh paharpurdholpur stone) (panji marked surface) machine cut of approved shade set in pattern over 30mm thick base in cement mortar 16 including pointing with cement mortar 12 (1 cement2 stone dust) mixed with pigment to match the shade of stone with joint thickness upto 5 mm as per existing flloringsample approved by the consultantapproved by (75mm thick)

Sqm 730

12

Providing and Fixing Cobbles stone of lime sand stone size 100X100MM and theakness of 70 to100mm on path way open court yards of color shade approved by the consultant over cement mortar 13 ( 1 cement3 course sand) keeping 10mm joint between cobbles filled with cement mortar 13 ( 1 cement3 course sand) the mortar should remain recessed by 5mm from the top surface of the cobble stone complete in all respects as per design and details provided by the consultant

Sqm 1650

13

Supply and installation of sanstone signage 450x200 mm of redwhiteapproved shade Sandstone 75 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete with fixing with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 6

30

14

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 450mmx2400mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved with ornamentation in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

15

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 650mmx1200mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

16

Heritage signage shall be etched on to Dulmera stone plaque of size 18m x 14m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 4

17

Signage shall be etched on to Dulmera stone plaque of size 18m x 10m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 12

18

Providing and fixing MS steel sheets 3 mm thickness on to MS anfgles flats tees and hollow sections with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Kg 10640

19

Providing and fixing MS perforated sheets 3 mm thickness with diamondround shaped perforations as per sample approved by the consultant with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Sqm 90

20

Painting of shop signages with lettering in hindienglish and ornamental design patterns in ready mix paint of approved brand and manfacture in all shades to give an even shade as per drawings and details provided by the consultant

Sqm 560

21

Flush pointing over joints of dressed stone cladding chajjas jali etc with neat cement sand amp colour including racking the joints as per Jodhpur practice including all leads and lifts with grinded mortar of lime putty and stone powder mixed in 11 ratio and gur methi gugal etc are to be mixed as per old traditional practice

Sqm 75

22

Khamira Colour Washing as per old traditional practice to prepare the Khamira the lime should be slaked at least for 7-10 days and regularly it should be stirred by adding cured Gugal for non-synthetic colour adding gum (babool gum) as per specificationThen applying prepared solution on walls three to four thin coats as desired finishing

Sqm 1750

31

23

Providing amp applying Lime kara 12 (1lime cream 2 Zikki powder) grinding mortar with grinding millmanually on lime baseon all flat surface in two coatsFirst coat applying 3mm to 4mm thick and curing properly at least 7 dayssecond finishing coat done after 7days of previous coat as per traditional practice(thickness not more than 6 mm)

Sqm 155

TOTAL OF NON SOR WORKS

10

SPECIAL CONDITIONS OF CONTRACT

1 The Technical bid will be opened first on the day mentioned in the NIT Bidders will be evaluated as per norms set for

qualification in Technical bid and Financial bids of only those bidders will be opened which were qualify in the technical bid

2 Contractors bidding for the work should be reputed experienced contractors fulfilling the requirements laid down in the NIT

and well versed and working in the field Only those bidders will be considered qualified in the Technical bid who have

executed similar works to the tune of at least 13rd of the estimated value of the work (published in NIT) during last five

years (updated to current price level 100 per annum) and have the necessary technical expertise and support

machinery and administrative and financial capability to satisfactorily execute works in question for which they are bidding

3 The decision of the General Manager-works RTDC Ltd Jaipur or his representative on pre-qualification in the Technical bid

will be final amp binding

4 All raw materials will have to be brought to the site and all carving work will have to be executed only at site to qualify for

payment of running bills No payment of any material at or work done at place other than the site of work will be made

unless such material is brought to site and found acceptable to be used on the work

5 General conditions of contract special conditions of contract and specification of work as appended herewith in addition to

General condition of agreement will be applicable on this work In addition the PWD specifications will also be applicable

as relevant to the particular item of work

6 Work shall be carried out as per approved drawings and designs to be provided by the departmental architect engaged

7 Architectural work for the construction shall be of a high standard quality and pattern (class and style) to match the existing

work

8 All work shall be carried out as per approved samples of each element

9 The exposed surface of stonework will be suitably protected from damage disfigurement during the course of work and will

be cleaned and washed removing all spots etc for final acceptance on completion

10 All scaffolding shuttering TampP etc for the work shall have to be arranged by contractor at his own cost

11 The time for completion of work as given in the NIT shall be strictly adhered to and the work so planned as to be completed

within the scheduled period The contractor shall provide with a time schedule to the department for progressing with and

completing various stages of the work

12 Only best quality stone and other building materials shall be used in construction and all such material will be got approved

from the Engineer in-charge before use

13 Quantities of individual items can be increased invariably or even reduced withdrawn and specification and designs altered

at the discretion of Engineer in-charge and contractor will not be entitled to any compensation thereof for such alteration For

extra items if any rates will be decided based on market analysis to be provided by contractor

14 Contractor will give notice before any work is covered up Bad work will have to be redonereplaced at contractors cost

15 Full scale drawings form work for architectural stone work to be developed from drawings wherever necessary shall be got

prepared by contractor for prior approval before Signature of contractor

construction at his own cost and he will get these approved from the Engineer in-charge General Manager-Works RTDC

Ltd Jaipur who shall however be at liberty to modify such drawings form work and no extra payment shall be made for this

16 It will be the contractors responsibility to get the drawings formwork and sample of individual itemselements of work

approved from the departmental Architect Engineer before proceeding with manufacture of the same at site

17 The contractor shall provide adequate safety measures and proper insurance for his labour working at site and it shall be

done by contractor at his end Contractor shall settle all labour disputes at his own level The contractor shall observe all

labourfactory laws in force

18 Security deposit will be recovered from each running bill of contractor as per provisions of PWFampAR Earnest money will be

adjusted in the security deposit amount Security deposit shall be returned after one year satisfactory completion of the work

and on satisfactory performance of structure

19 No escalation will be payable even if the completion period exceeds that as stipulated

20 In case of unsatisfactory work by contractor or deliberate delaying the work without valid reasons the contract will be liable

to be terminated at the stage up to which acceptable work is done and paid for with no compensation of any sort payable to

contractor for withdrawal at that stage and possession of work executed at site will be taken over by Department In case of

any dispute the decision of the Department will be final and binding on the contractor

21 The bidder has to furnish with his technical bid (In prescribed Performarsquos Schedule 1-5)

Full information regarding financial resources and capability in Schedule-1 herewith(Photocopy to be made out of schedule)

a) Details of works of similar type and magnitude completed in last 5 years by the tenderer in Schedule II (Photocopy to be

made out of schedule)

b) Details of works bids and works to be completed in Schedule-III (Photocopy to be made out of schedule)

c) Details of technical supervisory personnel and master craftsman craftsman which he proposes to utilize for this work in

Schedule IV (Photocopy to be made out of schedule)

d) Details of plant and equipment proposed for use in the work in Schedule V (Photocopy to be made out of schedule)

11

e) The bidder should demonstrate that they have adequate financial resources (Over draft Credit Limit letter from bank)

Signature of Contractor

22 Bid capacity

(i) Bidders who meet the minimum qualifying criteria are to be evaluated further for Bid capacity as under -

(a) Maximum value of similar works executed in any one year during the last five years including current year (updated to the

current price level) extracted from schedule II which will take into account the completed and on going works

(b) Value of the existing commitments works (complete or partial) to be completed in the coming 12 months (up dated to the

current price level) Extracted from schedule III

(ii) Bid Capacity=(AxNx3-B) where

A=Maximum value of works executed in any one year during the last five years (updated to present price level) taking into

account the completed as well as works in progress

N=Number of years prescribed for completion of the works for which bids are invited herein (in years)

B=Value at present price level of existing commitments and on going works (at hand) to be executed during N period

The bidder will be post qualified only if his bid capacity is equal or more than the cost of work in question No contract may be

awarded to bidder lacking the financial and technical resources to undertake the work The decision of General Manager

(Works) Rajasthan Tourism Development Corporation Ltd Jaipur in this regard will be final and binding

NOTE -The present price level for turn over cost of completed works and amount of similar nature works (of a value at least 13rd of the estimated value of the work published in NIT during last five years) the previous years value shall be given weightage of 10 per year as following for the tendersbids invited by this department ndash

(a) For last year - 100 (b) For one year before - 110 (c) For two year before - 121 (d) For three year before - 133 (e) For four year before - 146

For current year the price level shall be 10

23 The right to qualify or not to qualify any or all the bidders without assigning any reason is reserved with the General Manager

(Works) Rajasthan Tourism Development Corporation Ltd Jaipur

24 Determination of Responsiveness

a) Prior to the detailed evaluation of bids the General Manager (Works) Rajasthan Tourism Development Corporation Ltd

JAIPUR will determine whether each bid is substantially responsive to the requirements of the bidding documents

b) For the purpose of this clause a substantially responsive bid is one which has required capacity capability and financial

resources and whose bid conforms to all the terms conditions and specifications of the bidding documents without

material deviation or reservation A material deviation or reservation is one which affects in any substantial way the

scope quality or performance of the works or which limits in any substantial way the General Manager (Works)

Rajasthan Tourism Development Corporation Ltd JAIPURrsquoS right or the Bidders obligations under the contract and the

rectification of which deviation or reservation would effect unfairly the competitive position of other bidders presenting

substantially responsive bids

c) if a bid is not substantially responsive to the requirements of the bidding documents it will be rejected and may not

subsequently be made responsive by the bidder having corrected or withdrawn the nonconforming deviation or

reservation

25 Construction programme ndash

1) Within the time stated in this contract the Contractor shall after the acceptance of his tender submit to the General Manager

(Works) Rajasthan Tourism Development Corporation Ltd JAIPUR for approval programme together with bar chart PERT

chart

2) proposed deployment of machinery etc showing the order of procedure in which he proposes to carryout the works The

contractor shall provide in writing general description the arrangements deployment of equipment work planning and

methods which he proposes to adopt for the execution of the works

3) If at any time it should appear to the Department that actual progress of the work does not conform to the approved

programme referred to in sub-clause (1) of this clause the Contractor shall produce at the request of the Department a

revised programme showing the modifications to the approved programme necessary to ensure completion of the works

within the time for completion

4) The submission to and approval by the Department of such programmers or the furnishing of such particulars shall not

relieve the contractor of any of his duties or responsibilities under the contract

5) The contractor shall submit within 30 days after the date of notice to proceed with the work a detailed construction

programme to suit the programme of completion for the entire contract period This programme shall be reviewed and

revised every half year at the beginning of the working season to plan timely action for making up the slippages occurred in

the previous season to suit the stipulated period of completion (including mile stones) as extended from time to time

26 Materials workmanship period and certificates of Maintenance and Defect Liability etc

All materials and workmanship shall be of the respective kinds described in the contract and in accordance with the

ArchitectsEngineer instructions and shall be subjected from time to time to such tests as the Engineer may direct at the

place of manufacture or fabrication or on the site or at such other place or places as may be specified in the Contract or at

all or any of such places The contractor shall install quality control laboratory and provide such assistance instruments

machines labour and materials as are normally required for examining measuring and test in any work and the quality

weight or quantity of any material used and shall supply samples of materials before incorporation in the works for testing as

may be selected and required by the Engineer-in-charge

12

Signature of Contractor

27 Period of maintenance and Defects liability

The Contractor shall be responsible to make good within such period as maybe stipulated by the Engineer in-charge any

defect which may develop or may be noticed during period of maintenance of 12 months from the certified date of

completion and which is attributable to the contractor All notice of such defect shall be given to the Contractor promptly In

case the contractor fails to make good the defects the Engineer in-charge may employ other persons to make good such

defects and all expenses consequent thereof and incidental thereto shall be recoverable from the Contractor In the event

the employer takes over portions of work as they are completed the liability of the contractor under this clause for these

portions shall extend to a period of 24 months from the actual dates on which portions of the works are taken over

28 The successful biddercontractor is required to undertake detailed photo recording documentation by still photography

videography of the entire work prior to commencement and the same has to be deposited with the Engineer in charge of

RAJASTHAN TOURISM DEVELOPMENT CORPORATION JAIPUR in two copies immediately Before dismantling any old

work to redo this still photography with specifically putting some identity mark number of the portion by any specified means

has to be done and this to be got checked and certified by Engineer In charge and recorded specifically in the measurement

book (MB) A written permission from the Engineer in charge before commencement of executing such work is essential for

execution as well as for payments

During the work in progress and after its completion also photo documentation is necessary and the photos before amp after

completion of portion of work are essentially to be enclosed with the bill for payment

Signature of Contractor

GENERAL MANAGER (WORKS)

13

SCHEDULE-I

FINANCIAL RESOURCES AND CAPABILITY

(PURSUANT TO CLAUSE 26) 1 Name of Applicant

2 Name of Partner Director

3 Capital

(a) Authorised

(b) ii

4 (a) WhetheCategory of Enlisted in Govt

(b) Details Details of the work completed and applicants performance record for last five years

(information to be furnished in Schedule II in India

(c) Details of works in hand applicants performance record for last five years (Information to be

furnished in Schedule-III)

5 Furnish Balance Sheet and profit and loss statement with auditorrsquos report for the last three years

6 The information on the following aspects should be specifically furnished

(i) Working capital and net worth

(ii) Turnover for the years

a

b

c

(iii) Gross income in years in India

(i)

(ii)

(iii)

(iv) Quick ratio or acid test ration (Quick assets to current liabilities)

7 What is the maximum annual turnover of the project that you can handle (Financial Projection)

8 Have you ever been denied tendering facilities by any Governmental DepartmentPublic Sector

undertaking

(If yes Please give details)

9 List of your source of finance

10 Certificate of financial soundness by Bank

11 Name and address of Bank from whom reference can be obtained

12 Have you ever been declared bankrupt

(if yes please give details)

Signature of Contractor

14

SCHEDULE-II WORKS OF SIMILAR MAGNITUDE TO THE WORK UNDER CONSIDERATION COMPLETED BY THE

APPLICANT IN LAST FIVE YEARS IN INDIA

(Pursuant to Clause 26)

SNo Na

me

of

wor

k

Place

amp

State

Tender

awardi

ng

Agency

Tender

ed Cost

Stipulate

d time of

Completi

on

Time in

which

complete

d

Date

of

comp

letion

Reason

for

Delay

Principal

features

of work

done

Value of

work done

1 2 3 4 5 6 7 8 9 10 11

Year

Year

Year

Signature of Contractor

15

SCHEDULE-III WORKS TENDERED FOR amp WORKS TO BE COMPLETED AS ON THE DATE OF SUBMISSION OF

APPLICATION IN INDIA

(pursuant Clause 26)

SNo Name

of

work

Place

amp

State

Work on Hand Work tendered for

Tender

Cost amp

Date

or

award

Stipulated

period of

Completion

Cost of

work

remaining

to be

executed

Antici

pated

Date

of

compl

eted

Estimate

d cost

(Rs In

Lakh)

Date

when

decisio

n

expecte

d

Stipulate

d Date

period of

Completi

on

Remar

ks

1 2 3 4 5 6 7 8 9 10 11

Year

Year

Year

Signature of Contractor

16

SCHEDULE- IV

Details of Key Personnel intended to be employed for this work

(use separate sheet if necessary)

(Pursuant to clause 26)

S No Name of Person Qualification Designation Experience Work to be

put on

A Technical Personnel

(1)

(2)

(3)

(4)

B Administrative Personnel

(1)

(2)

(3)

(4)

C Master Craftsmen

(1)

(2)

(3)

(4)

D Craftsmen

(1)

(2)

(3)

(4)

E Any other (1)

(2)

(3)

(4)

Signature of Contractor

17

SCHEDULE- V

DETAILS OF MAJOR ITEMS OF CONSTRUCTION PLANT AVAILABLE FOR THIS WORK

S No

Particulars Make Year of manufacture

Nos Whether owned or confirmed lease

1 Lime mortar Mill

2 Scaffolding Material

3 Movable Gantry

Crane etc

4 Any other TampP for

the purpose

5

6

7

8

Signature of Contractor

18

RAJASTHAN TOURISM DEVELOPMENT CORPORATION LIMITED JAIPUR

(WORKS DIVISION)

TENDER DOCUMENT (Financial Bid)

E-Tender (NIT No) 082016-17

Name of work- Pushkar Market Street- Restoration And Development Works

Restoration Conservation work Stained GssMirror

Signature of Contractor

19

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works

(Based on PWD BSR CIVILElectrical Ajmer Circle - 2013 and item rates)

SCHEDULE -G

GENERAL ABSTRACT

SNO WORK AMOUNT

1

PART A- CIVIL WORKS BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

304610000

2

PART B- SANITARY WORKS BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

5936400

3

PART C- HORTICULTURE BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

2627500

4

PART D-NON BSR ITEMS ( CIVIL AND ELECTRICAL)

GRAND TOTAL

I we hereby agree to execute the work PART A In figures Above Below In words

Above below PART B In figures Above Below In words

Above below PART C In figures Above Below In words

Above below PART D In figures Above Below In words

Above below

General Manager Works

RTDC Ltd Jaipur

Signature of the Contractor With Full Postal Address

20

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works

(Based on PWD BSR Civil Ajmer Circle - 2013)

PART A- CIVIL WORKS

SL No Specification Unit Rate QTY Amount

1

Surface Dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr and lift up to 15 Mtr All kinds of soil 100Sqm 437

26

11362

2

Surface Dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr and lift up to 15 Mtr All kinds of soil Cum 127

30

3810

3

Filling available excavated earth (excluding rock) in trenches plinth side of foundation etc in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift Cum 61

12 732

4

Providing and laying in position cement concrete including curing compaction etc complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level

M15 grade Nominal Mix (with graded stone aggregate 20mm nominal size) Cum

3438

230

790740

5

Random Rubble stone masonry for foundation and plinth in Cement Sand mortar above 30 CM thick wall in

21

Cement Mortar 13 ( 1-Cement 3-Sand) Cum

2193

35

76755

6

Random Rubble stone masonry for superstructure above plinth level one storey height above 30cm thick walls in

Cement Mortar 13 ( 1-Cement 3-Sand) Cum

2686

135

362610

7

Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor three level including curing compaction finishing with rendering in cement sand mortar 13 (1 cement 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement for -

Beams suspended floors roofs griders having slopes up to 15ordm landings balconies shelves chajjas lintels bands plain windows sills staircases and spiral staircases etc

M20 grade Nominal Mix

Cum 5138

45

231210

8

Centering amp shuttering with plywood or steel sheets including strutting propping bracing both ways with wooden members and removal of formwork for upto floor three level for

Suspended floors roofs landings staircases balconies girders cantilevers bands coping bed plates anchor blocks sills chhajjas lintel beam etc Sqm 222

60

13320

9

Providing and fabricating reinforcement using steel of SAILVIZAK-RINLTATA TISCONESSARZINDAL VIJAINAGAR IS 1786-1986 for RCC work including straightening cutting bending placing in position and binding (including cost of binding wire) all complete up to floor three level

22

Thermo-Mechanically Treated bars (Conforming of relevent IS code) Kg 78

2630

205140

10

Plaster on new surface on wall in cement sand mortar 13 including racking of joints etc complete fine finish

20mm thick Sqm 161

150

24150

11

6mm thick cement plaster to ceiling of mix 13 (1cement 3 fine sand) Sqm 105

25

2625

12

Polished Blue Kota Stone flooring skirting laid over 20mm thick base of CM 14 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete

13

For area of each slab from 2001 to 5000 SqCm

30mm thick slab

Sqm 988

35

34580

14

Wall Painting with plastic emulsion paint of approved brand and manufacture to give an even shade

Two or more coats on new work including preparation of base with primer putty lippy complete in all respect Sqm 82

76

6232

15

Applying Exterior Emulsion Paint like ACE APEX or equivalent brand and manufacture of required shade to give an even shade including all scaffolding on prepared surface (excluding water primer)

New Work (Two or more coats) Sqm 119

28

3332

16

Applying one coat of Asian Paints DECO Primer (Water thinnable) of approved brand amp manufacture ic scrapping by sand papering and preparing the even surface on wallwall putty as base for ACE APEX or APEX ULTIMA ic all scaffolding(New Surface) Sqm 24

104

2496

23

17

providing and fixing steel gategrating and grills made of anglesteessqure bars flats or blackpipe with holdfast and fitting complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide kg 83

1250

103750

Demolishing cement concrete including disposal of material with in 50 meter lead

136 or richer mix Cum 319

30

9570

148 or leaner mix Cum 311

20

6220

18

Demolishing RCC work manually by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge

Cum 1085

30

32550

19

Rough chisel dressed stone flooring over 20mm (Av) thick base in CM 16 including pointing with cement mortar 12 (1 cement 2 stone dust) with and admixture of pigment to match the shade of stone with joint thickness upto 15mm

45mm thick red sand stone

Sqm 385

230

88550

20

Providing and fixing 1st quality standard white grey ivory fume red brown light green light blue and other light shades glazed tiles confirming to IS 13753 amp IS 15622 of size 300mm x 200mm in walls floors steps pillars etc laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar)

Catogary-A Kajaria Johnson Somani Orient make Sqm 763

25

19075

24

21

Applying one coat industrial grade bitumen of penetration 2585 of approved quality using 170 kg per Sqm on Damp Proof Coarse after cleaning the surface with brushes and finally with a piece of cloth slightly soaked in kerosene oil Sqm 103

45

4635

22

Providing and Fixing 30 too 40 mm thickk stone chajjas in cement sand mortar 14 including making gola at junction with wall concrete M-15 grade (124 nominal mix drip course

20 mm thick plastering in CM 16 on both Sqm 645

35

22575

23

Providing and fixing steel gate grating and grills made of angles tees square bars flatsor black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide

Kg 83

9750

809250

24

Extra if squarerectangular hollow tubelar sections are used or grill made by flats only

Kg

10

6490

64251

P amp F bolts including nuts and bolts complete

Kg 57

240

13680

25

Painting with ready mix paint of approved brand and manufacture in all shades to give an even shade

New Steel Work Sqm 40

1500

60000

Welding by electric plant cmlength 286

15000

42900

TOTAL OF BSR WORKS CIVIL

3046100

25

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - B- SANITARY WORKS

SL No Specification Unit Rate QTY Amount

1

P amp F GI Pipes (External Work) with GI Fittings excluding union (IS 1239 Mark) including trenching amp refilling earth etc

40mm dia nominal bore A Class

Mtr 338

32 10816

25mm dia nominal bore A Class

Mtr 182

48 8736

2

Making connection of GI distribution Branch with GI main including all Fitting

Beyond 25mm amp upto 100mm dia Each 332 8 2656

3

P amp F Sand ndashcast Floor Trap (Nahni) of (IS1729 mark) of approved qualitymake with socket down or hinged grating including cutting and making good the floor- 100 x 100mm Each

421

4 1684

4

P amp F Gun-metal Full-way Valve (IS778 Mark) or wheel valve of approved make

Gun metal 25mm nominal bore Each 702 4 2808

Gun metal 40mm nominal bore Each 1065 4 4260

5

P amp F PVC Storage Tank ISI Marked (IS 12701) indicating the BIS license No) of approved make with cover 25mm dia 1M long GI over-flow pipe amp 25 Cm long wash out pipe with plug amp socket including making connection etc complete of approved design

1000 litres capacity Each 5437 4 21748

6

P amp F push cock superior quality of approved make

CP brass 15 mm

Each 416

16 6656

TOTAL 5936400

26

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - C-HOTICULTURE WORKS

SL No Specification Unit Rate QTY Amount

1

Supply of dry manure including loading unloading transportation amp stacking at site

Goat dungmanure

Cum

50000

35

17500

2

Supply amp Stacking good earth at site complete including loading unloading amp transportation etc Cum

7500

55

4125

3

Supply of different varities of treeshrubsclimbers according to height and age of the plant at site including loadingunloading amp transportation etc complete

Different flowing plants 900mm to 1500mm Each

1500

115

1725

4

Supply of different varities of bougainvillea in poly bagsearthen pots according to height growth amp age of plant at site including loadingunloading amp transportation etc complete

Local variety of bougainvillea 600 mm to 900mm Each

1500

75

1125

5

Digging pits in ordinary soil amp refilling the same with the excavated earth mixed with manure in the ratio 21 by volume (2 parts of stacked volume of earth after reduction by 20 1 parts of stacked volume of manure after reduction by 8) flooding with water and dressing including removal of surplus earth Each

1000

150

1500

27

(Cost of manure or extra good earth if needed to be paid separately) pit dia 60 cm X 60 cm deep

6

Spreading of manure and good earth in required thickness (cost of manure and good earth to be paid separately) Cum

400

75

300

TOTAL OF HORTICULTURE WORKS

26275

28

SCHEDULE OF QUANTITIES

Name of work Pushkar Market Street- Restoration And Development Works

(Based on item rates)

PART - D- NON SOR WORKS

SL No

Specification Unit Rate to

be Quoted

QTY

Amount

1

Providing and fixing fine dressed sand stoneapproved stone JALIas per existing matching geometrical design including moulding work with fine finishing fixing with thambli by proper adhesive and white cement with pigment including making groove etc complete in all respect

(b) 50mm thick Sqm 45

2

Providing amp fixing ashlar Rain water Spouts (3) lines dressed as per traditional practice existing design approved design size 60 x 30 x 25 cm fixing the rain water spout with lime surkhi mortar 12 with proper slope complete in all respect Each

12

3

Providing amp fixing ornamental stone cladding of approved sand stone with dressing complete as per existing designpatternapproved designfixing with 30mm thickgrinded lime surkhi mortar 12 amp pointing with white cement with araldite and pigment to match shade the stone complete in all respect as per direction of Engineer incharge(75mm thick) Sqm

54

4

Providing and fixing fine dressed sand stone Dasacoping as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect

(c) 75mm to 100mm thick with pan patti design Sqm 320

5

Providing and fixing fine dressed sand stone Cladding (Plain dressing only) as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect including removal of damaged cladding

(a) 50mm to 60mm thick Sqm 180

6

Supply and istallation whiteredapproved shade sandstone dustbin of size 800 mm x 450 mm and height 850 mm with hollow center to hang MS Dustbin of size 400mmx 500mmx 600 mm made of 1mm thick metal sheet fixed to stone pillars with MS chain edged with 50x50x5 mm angle sections including cutting welding and fabrication with priming coat of red oxide and approved ready mix paint of approved shadeStone peices joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 26

29

7

Supply and istallation of RedWhiteapproved shade stone bench of size 1500mmx450mmx450 mm horizontal stone members of size 300mmx400mmx450mm on two sides supporting the horizontal seating stone of 150 mm thickness fixed to vertical stone members joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 35

8

Poviding fixing testing and commisioning of Stainless Steel body bull Storage Capacity in (litres) 150 bull Nominal Cooling Capacity (Litreshr) 150 bull No Of Faucets 2 bull Dimensions 820W x 700D x 1235 H bull Normal Demand (glasses hr) 750 bull Refrigerant R-22 bull Current (Amps) 749 bull Water Overflow (Connections) 12 BSP bull Type Of Compressor Rotary Model No- SDLX15150A make Blue star or similar in make of VoltasOasis

Each 4

9

Providing fixing testing and commissioning of water purification system having auto shut-off e-boiling Voltage Stabilizer bull Type of Treatment- sediment filter active carbon cartridge mineral guard UV chamber bull water flow rate 3ltrminbull ultra- violet lamp of 16 watts bull power rating of 35watt bull Dimensions 355H x 1025D x 307WModel ndash Hi fio Make Eureka Forbes- aquagard or similar in make of livpurekent

Each 4

10

Demolishion of the existing bituminous road surface to a depth of 150 mm and disposal of demolished material with a lift upto 3 m and lead upto 1000 m

Sqm 50

11

Providing and fixing fine dressed sand stone flooring with white sand stone (Bansh paharpurdholpur stone) (panji marked surface) machine cut of approved shade set in pattern over 30mm thick base in cement mortar 16 including pointing with cement mortar 12 (1 cement2 stone dust) mixed with pigment to match the shade of stone with joint thickness upto 5 mm as per existing flloringsample approved by the consultantapproved by (75mm thick)

Sqm 730

12

Providing and Fixing Cobbles stone of lime sand stone size 100X100MM and theakness of 70 to100mm on path way open court yards of color shade approved by the consultant over cement mortar 13 ( 1 cement3 course sand) keeping 10mm joint between cobbles filled with cement mortar 13 ( 1 cement3 course sand) the mortar should remain recessed by 5mm from the top surface of the cobble stone complete in all respects as per design and details provided by the consultant

Sqm 1650

13

Supply and installation of sanstone signage 450x200 mm of redwhiteapproved shade Sandstone 75 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete with fixing with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 6

30

14

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 450mmx2400mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved with ornamentation in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

15

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 650mmx1200mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

16

Heritage signage shall be etched on to Dulmera stone plaque of size 18m x 14m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 4

17

Signage shall be etched on to Dulmera stone plaque of size 18m x 10m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 12

18

Providing and fixing MS steel sheets 3 mm thickness on to MS anfgles flats tees and hollow sections with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Kg 10640

19

Providing and fixing MS perforated sheets 3 mm thickness with diamondround shaped perforations as per sample approved by the consultant with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Sqm 90

20

Painting of shop signages with lettering in hindienglish and ornamental design patterns in ready mix paint of approved brand and manfacture in all shades to give an even shade as per drawings and details provided by the consultant

Sqm 560

21

Flush pointing over joints of dressed stone cladding chajjas jali etc with neat cement sand amp colour including racking the joints as per Jodhpur practice including all leads and lifts with grinded mortar of lime putty and stone powder mixed in 11 ratio and gur methi gugal etc are to be mixed as per old traditional practice

Sqm 75

22

Khamira Colour Washing as per old traditional practice to prepare the Khamira the lime should be slaked at least for 7-10 days and regularly it should be stirred by adding cured Gugal for non-synthetic colour adding gum (babool gum) as per specificationThen applying prepared solution on walls three to four thin coats as desired finishing

Sqm 1750

31

23

Providing amp applying Lime kara 12 (1lime cream 2 Zikki powder) grinding mortar with grinding millmanually on lime baseon all flat surface in two coatsFirst coat applying 3mm to 4mm thick and curing properly at least 7 dayssecond finishing coat done after 7days of previous coat as per traditional practice(thickness not more than 6 mm)

Sqm 155

TOTAL OF NON SOR WORKS

11

e) The bidder should demonstrate that they have adequate financial resources (Over draft Credit Limit letter from bank)

Signature of Contractor

22 Bid capacity

(i) Bidders who meet the minimum qualifying criteria are to be evaluated further for Bid capacity as under -

(a) Maximum value of similar works executed in any one year during the last five years including current year (updated to the

current price level) extracted from schedule II which will take into account the completed and on going works

(b) Value of the existing commitments works (complete or partial) to be completed in the coming 12 months (up dated to the

current price level) Extracted from schedule III

(ii) Bid Capacity=(AxNx3-B) where

A=Maximum value of works executed in any one year during the last five years (updated to present price level) taking into

account the completed as well as works in progress

N=Number of years prescribed for completion of the works for which bids are invited herein (in years)

B=Value at present price level of existing commitments and on going works (at hand) to be executed during N period

The bidder will be post qualified only if his bid capacity is equal or more than the cost of work in question No contract may be

awarded to bidder lacking the financial and technical resources to undertake the work The decision of General Manager

(Works) Rajasthan Tourism Development Corporation Ltd Jaipur in this regard will be final and binding

NOTE -The present price level for turn over cost of completed works and amount of similar nature works (of a value at least 13rd of the estimated value of the work published in NIT during last five years) the previous years value shall be given weightage of 10 per year as following for the tendersbids invited by this department ndash

(a) For last year - 100 (b) For one year before - 110 (c) For two year before - 121 (d) For three year before - 133 (e) For four year before - 146

For current year the price level shall be 10

23 The right to qualify or not to qualify any or all the bidders without assigning any reason is reserved with the General Manager

(Works) Rajasthan Tourism Development Corporation Ltd Jaipur

24 Determination of Responsiveness

a) Prior to the detailed evaluation of bids the General Manager (Works) Rajasthan Tourism Development Corporation Ltd

JAIPUR will determine whether each bid is substantially responsive to the requirements of the bidding documents

b) For the purpose of this clause a substantially responsive bid is one which has required capacity capability and financial

resources and whose bid conforms to all the terms conditions and specifications of the bidding documents without

material deviation or reservation A material deviation or reservation is one which affects in any substantial way the

scope quality or performance of the works or which limits in any substantial way the General Manager (Works)

Rajasthan Tourism Development Corporation Ltd JAIPURrsquoS right or the Bidders obligations under the contract and the

rectification of which deviation or reservation would effect unfairly the competitive position of other bidders presenting

substantially responsive bids

c) if a bid is not substantially responsive to the requirements of the bidding documents it will be rejected and may not

subsequently be made responsive by the bidder having corrected or withdrawn the nonconforming deviation or

reservation

25 Construction programme ndash

1) Within the time stated in this contract the Contractor shall after the acceptance of his tender submit to the General Manager

(Works) Rajasthan Tourism Development Corporation Ltd JAIPUR for approval programme together with bar chart PERT

chart

2) proposed deployment of machinery etc showing the order of procedure in which he proposes to carryout the works The

contractor shall provide in writing general description the arrangements deployment of equipment work planning and

methods which he proposes to adopt for the execution of the works

3) If at any time it should appear to the Department that actual progress of the work does not conform to the approved

programme referred to in sub-clause (1) of this clause the Contractor shall produce at the request of the Department a

revised programme showing the modifications to the approved programme necessary to ensure completion of the works

within the time for completion

4) The submission to and approval by the Department of such programmers or the furnishing of such particulars shall not

relieve the contractor of any of his duties or responsibilities under the contract

5) The contractor shall submit within 30 days after the date of notice to proceed with the work a detailed construction

programme to suit the programme of completion for the entire contract period This programme shall be reviewed and

revised every half year at the beginning of the working season to plan timely action for making up the slippages occurred in

the previous season to suit the stipulated period of completion (including mile stones) as extended from time to time

26 Materials workmanship period and certificates of Maintenance and Defect Liability etc

All materials and workmanship shall be of the respective kinds described in the contract and in accordance with the

ArchitectsEngineer instructions and shall be subjected from time to time to such tests as the Engineer may direct at the

place of manufacture or fabrication or on the site or at such other place or places as may be specified in the Contract or at

all or any of such places The contractor shall install quality control laboratory and provide such assistance instruments

machines labour and materials as are normally required for examining measuring and test in any work and the quality

weight or quantity of any material used and shall supply samples of materials before incorporation in the works for testing as

may be selected and required by the Engineer-in-charge

12

Signature of Contractor

27 Period of maintenance and Defects liability

The Contractor shall be responsible to make good within such period as maybe stipulated by the Engineer in-charge any

defect which may develop or may be noticed during period of maintenance of 12 months from the certified date of

completion and which is attributable to the contractor All notice of such defect shall be given to the Contractor promptly In

case the contractor fails to make good the defects the Engineer in-charge may employ other persons to make good such

defects and all expenses consequent thereof and incidental thereto shall be recoverable from the Contractor In the event

the employer takes over portions of work as they are completed the liability of the contractor under this clause for these

portions shall extend to a period of 24 months from the actual dates on which portions of the works are taken over

28 The successful biddercontractor is required to undertake detailed photo recording documentation by still photography

videography of the entire work prior to commencement and the same has to be deposited with the Engineer in charge of

RAJASTHAN TOURISM DEVELOPMENT CORPORATION JAIPUR in two copies immediately Before dismantling any old

work to redo this still photography with specifically putting some identity mark number of the portion by any specified means

has to be done and this to be got checked and certified by Engineer In charge and recorded specifically in the measurement

book (MB) A written permission from the Engineer in charge before commencement of executing such work is essential for

execution as well as for payments

During the work in progress and after its completion also photo documentation is necessary and the photos before amp after

completion of portion of work are essentially to be enclosed with the bill for payment

Signature of Contractor

GENERAL MANAGER (WORKS)

13

SCHEDULE-I

FINANCIAL RESOURCES AND CAPABILITY

(PURSUANT TO CLAUSE 26) 1 Name of Applicant

2 Name of Partner Director

3 Capital

(a) Authorised

(b) ii

4 (a) WhetheCategory of Enlisted in Govt

(b) Details Details of the work completed and applicants performance record for last five years

(information to be furnished in Schedule II in India

(c) Details of works in hand applicants performance record for last five years (Information to be

furnished in Schedule-III)

5 Furnish Balance Sheet and profit and loss statement with auditorrsquos report for the last three years

6 The information on the following aspects should be specifically furnished

(i) Working capital and net worth

(ii) Turnover for the years

a

b

c

(iii) Gross income in years in India

(i)

(ii)

(iii)

(iv) Quick ratio or acid test ration (Quick assets to current liabilities)

7 What is the maximum annual turnover of the project that you can handle (Financial Projection)

8 Have you ever been denied tendering facilities by any Governmental DepartmentPublic Sector

undertaking

(If yes Please give details)

9 List of your source of finance

10 Certificate of financial soundness by Bank

11 Name and address of Bank from whom reference can be obtained

12 Have you ever been declared bankrupt

(if yes please give details)

Signature of Contractor

14

SCHEDULE-II WORKS OF SIMILAR MAGNITUDE TO THE WORK UNDER CONSIDERATION COMPLETED BY THE

APPLICANT IN LAST FIVE YEARS IN INDIA

(Pursuant to Clause 26)

SNo Na

me

of

wor

k

Place

amp

State

Tender

awardi

ng

Agency

Tender

ed Cost

Stipulate

d time of

Completi

on

Time in

which

complete

d

Date

of

comp

letion

Reason

for

Delay

Principal

features

of work

done

Value of

work done

1 2 3 4 5 6 7 8 9 10 11

Year

Year

Year

Signature of Contractor

15

SCHEDULE-III WORKS TENDERED FOR amp WORKS TO BE COMPLETED AS ON THE DATE OF SUBMISSION OF

APPLICATION IN INDIA

(pursuant Clause 26)

SNo Name

of

work

Place

amp

State

Work on Hand Work tendered for

Tender

Cost amp

Date

or

award

Stipulated

period of

Completion

Cost of

work

remaining

to be

executed

Antici

pated

Date

of

compl

eted

Estimate

d cost

(Rs In

Lakh)

Date

when

decisio

n

expecte

d

Stipulate

d Date

period of

Completi

on

Remar

ks

1 2 3 4 5 6 7 8 9 10 11

Year

Year

Year

Signature of Contractor

16

SCHEDULE- IV

Details of Key Personnel intended to be employed for this work

(use separate sheet if necessary)

(Pursuant to clause 26)

S No Name of Person Qualification Designation Experience Work to be

put on

A Technical Personnel

(1)

(2)

(3)

(4)

B Administrative Personnel

(1)

(2)

(3)

(4)

C Master Craftsmen

(1)

(2)

(3)

(4)

D Craftsmen

(1)

(2)

(3)

(4)

E Any other (1)

(2)

(3)

(4)

Signature of Contractor

17

SCHEDULE- V

DETAILS OF MAJOR ITEMS OF CONSTRUCTION PLANT AVAILABLE FOR THIS WORK

S No

Particulars Make Year of manufacture

Nos Whether owned or confirmed lease

1 Lime mortar Mill

2 Scaffolding Material

3 Movable Gantry

Crane etc

4 Any other TampP for

the purpose

5

6

7

8

Signature of Contractor

18

RAJASTHAN TOURISM DEVELOPMENT CORPORATION LIMITED JAIPUR

(WORKS DIVISION)

TENDER DOCUMENT (Financial Bid)

E-Tender (NIT No) 082016-17

Name of work- Pushkar Market Street- Restoration And Development Works

Restoration Conservation work Stained GssMirror

Signature of Contractor

19

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works

(Based on PWD BSR CIVILElectrical Ajmer Circle - 2013 and item rates)

SCHEDULE -G

GENERAL ABSTRACT

SNO WORK AMOUNT

1

PART A- CIVIL WORKS BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

304610000

2

PART B- SANITARY WORKS BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

5936400

3

PART C- HORTICULTURE BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

2627500

4

PART D-NON BSR ITEMS ( CIVIL AND ELECTRICAL)

GRAND TOTAL

I we hereby agree to execute the work PART A In figures Above Below In words

Above below PART B In figures Above Below In words

Above below PART C In figures Above Below In words

Above below PART D In figures Above Below In words

Above below

General Manager Works

RTDC Ltd Jaipur

Signature of the Contractor With Full Postal Address

20

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works

(Based on PWD BSR Civil Ajmer Circle - 2013)

PART A- CIVIL WORKS

SL No Specification Unit Rate QTY Amount

1

Surface Dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr and lift up to 15 Mtr All kinds of soil 100Sqm 437

26

11362

2

Surface Dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr and lift up to 15 Mtr All kinds of soil Cum 127

30

3810

3

Filling available excavated earth (excluding rock) in trenches plinth side of foundation etc in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift Cum 61

12 732

4

Providing and laying in position cement concrete including curing compaction etc complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level

M15 grade Nominal Mix (with graded stone aggregate 20mm nominal size) Cum

3438

230

790740

5

Random Rubble stone masonry for foundation and plinth in Cement Sand mortar above 30 CM thick wall in

21

Cement Mortar 13 ( 1-Cement 3-Sand) Cum

2193

35

76755

6

Random Rubble stone masonry for superstructure above plinth level one storey height above 30cm thick walls in

Cement Mortar 13 ( 1-Cement 3-Sand) Cum

2686

135

362610

7

Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor three level including curing compaction finishing with rendering in cement sand mortar 13 (1 cement 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement for -

Beams suspended floors roofs griders having slopes up to 15ordm landings balconies shelves chajjas lintels bands plain windows sills staircases and spiral staircases etc

M20 grade Nominal Mix

Cum 5138

45

231210

8

Centering amp shuttering with plywood or steel sheets including strutting propping bracing both ways with wooden members and removal of formwork for upto floor three level for

Suspended floors roofs landings staircases balconies girders cantilevers bands coping bed plates anchor blocks sills chhajjas lintel beam etc Sqm 222

60

13320

9

Providing and fabricating reinforcement using steel of SAILVIZAK-RINLTATA TISCONESSARZINDAL VIJAINAGAR IS 1786-1986 for RCC work including straightening cutting bending placing in position and binding (including cost of binding wire) all complete up to floor three level

22

Thermo-Mechanically Treated bars (Conforming of relevent IS code) Kg 78

2630

205140

10

Plaster on new surface on wall in cement sand mortar 13 including racking of joints etc complete fine finish

20mm thick Sqm 161

150

24150

11

6mm thick cement plaster to ceiling of mix 13 (1cement 3 fine sand) Sqm 105

25

2625

12

Polished Blue Kota Stone flooring skirting laid over 20mm thick base of CM 14 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete

13

For area of each slab from 2001 to 5000 SqCm

30mm thick slab

Sqm 988

35

34580

14

Wall Painting with plastic emulsion paint of approved brand and manufacture to give an even shade

Two or more coats on new work including preparation of base with primer putty lippy complete in all respect Sqm 82

76

6232

15

Applying Exterior Emulsion Paint like ACE APEX or equivalent brand and manufacture of required shade to give an even shade including all scaffolding on prepared surface (excluding water primer)

New Work (Two or more coats) Sqm 119

28

3332

16

Applying one coat of Asian Paints DECO Primer (Water thinnable) of approved brand amp manufacture ic scrapping by sand papering and preparing the even surface on wallwall putty as base for ACE APEX or APEX ULTIMA ic all scaffolding(New Surface) Sqm 24

104

2496

23

17

providing and fixing steel gategrating and grills made of anglesteessqure bars flats or blackpipe with holdfast and fitting complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide kg 83

1250

103750

Demolishing cement concrete including disposal of material with in 50 meter lead

136 or richer mix Cum 319

30

9570

148 or leaner mix Cum 311

20

6220

18

Demolishing RCC work manually by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge

Cum 1085

30

32550

19

Rough chisel dressed stone flooring over 20mm (Av) thick base in CM 16 including pointing with cement mortar 12 (1 cement 2 stone dust) with and admixture of pigment to match the shade of stone with joint thickness upto 15mm

45mm thick red sand stone

Sqm 385

230

88550

20

Providing and fixing 1st quality standard white grey ivory fume red brown light green light blue and other light shades glazed tiles confirming to IS 13753 amp IS 15622 of size 300mm x 200mm in walls floors steps pillars etc laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar)

Catogary-A Kajaria Johnson Somani Orient make Sqm 763

25

19075

24

21

Applying one coat industrial grade bitumen of penetration 2585 of approved quality using 170 kg per Sqm on Damp Proof Coarse after cleaning the surface with brushes and finally with a piece of cloth slightly soaked in kerosene oil Sqm 103

45

4635

22

Providing and Fixing 30 too 40 mm thickk stone chajjas in cement sand mortar 14 including making gola at junction with wall concrete M-15 grade (124 nominal mix drip course

20 mm thick plastering in CM 16 on both Sqm 645

35

22575

23

Providing and fixing steel gate grating and grills made of angles tees square bars flatsor black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide

Kg 83

9750

809250

24

Extra if squarerectangular hollow tubelar sections are used or grill made by flats only

Kg

10

6490

64251

P amp F bolts including nuts and bolts complete

Kg 57

240

13680

25

Painting with ready mix paint of approved brand and manufacture in all shades to give an even shade

New Steel Work Sqm 40

1500

60000

Welding by electric plant cmlength 286

15000

42900

TOTAL OF BSR WORKS CIVIL

3046100

25

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - B- SANITARY WORKS

SL No Specification Unit Rate QTY Amount

1

P amp F GI Pipes (External Work) with GI Fittings excluding union (IS 1239 Mark) including trenching amp refilling earth etc

40mm dia nominal bore A Class

Mtr 338

32 10816

25mm dia nominal bore A Class

Mtr 182

48 8736

2

Making connection of GI distribution Branch with GI main including all Fitting

Beyond 25mm amp upto 100mm dia Each 332 8 2656

3

P amp F Sand ndashcast Floor Trap (Nahni) of (IS1729 mark) of approved qualitymake with socket down or hinged grating including cutting and making good the floor- 100 x 100mm Each

421

4 1684

4

P amp F Gun-metal Full-way Valve (IS778 Mark) or wheel valve of approved make

Gun metal 25mm nominal bore Each 702 4 2808

Gun metal 40mm nominal bore Each 1065 4 4260

5

P amp F PVC Storage Tank ISI Marked (IS 12701) indicating the BIS license No) of approved make with cover 25mm dia 1M long GI over-flow pipe amp 25 Cm long wash out pipe with plug amp socket including making connection etc complete of approved design

1000 litres capacity Each 5437 4 21748

6

P amp F push cock superior quality of approved make

CP brass 15 mm

Each 416

16 6656

TOTAL 5936400

26

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - C-HOTICULTURE WORKS

SL No Specification Unit Rate QTY Amount

1

Supply of dry manure including loading unloading transportation amp stacking at site

Goat dungmanure

Cum

50000

35

17500

2

Supply amp Stacking good earth at site complete including loading unloading amp transportation etc Cum

7500

55

4125

3

Supply of different varities of treeshrubsclimbers according to height and age of the plant at site including loadingunloading amp transportation etc complete

Different flowing plants 900mm to 1500mm Each

1500

115

1725

4

Supply of different varities of bougainvillea in poly bagsearthen pots according to height growth amp age of plant at site including loadingunloading amp transportation etc complete

Local variety of bougainvillea 600 mm to 900mm Each

1500

75

1125

5

Digging pits in ordinary soil amp refilling the same with the excavated earth mixed with manure in the ratio 21 by volume (2 parts of stacked volume of earth after reduction by 20 1 parts of stacked volume of manure after reduction by 8) flooding with water and dressing including removal of surplus earth Each

1000

150

1500

27

(Cost of manure or extra good earth if needed to be paid separately) pit dia 60 cm X 60 cm deep

6

Spreading of manure and good earth in required thickness (cost of manure and good earth to be paid separately) Cum

400

75

300

TOTAL OF HORTICULTURE WORKS

26275

28

SCHEDULE OF QUANTITIES

Name of work Pushkar Market Street- Restoration And Development Works

(Based on item rates)

PART - D- NON SOR WORKS

SL No

Specification Unit Rate to

be Quoted

QTY

Amount

1

Providing and fixing fine dressed sand stoneapproved stone JALIas per existing matching geometrical design including moulding work with fine finishing fixing with thambli by proper adhesive and white cement with pigment including making groove etc complete in all respect

(b) 50mm thick Sqm 45

2

Providing amp fixing ashlar Rain water Spouts (3) lines dressed as per traditional practice existing design approved design size 60 x 30 x 25 cm fixing the rain water spout with lime surkhi mortar 12 with proper slope complete in all respect Each

12

3

Providing amp fixing ornamental stone cladding of approved sand stone with dressing complete as per existing designpatternapproved designfixing with 30mm thickgrinded lime surkhi mortar 12 amp pointing with white cement with araldite and pigment to match shade the stone complete in all respect as per direction of Engineer incharge(75mm thick) Sqm

54

4

Providing and fixing fine dressed sand stone Dasacoping as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect

(c) 75mm to 100mm thick with pan patti design Sqm 320

5

Providing and fixing fine dressed sand stone Cladding (Plain dressing only) as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect including removal of damaged cladding

(a) 50mm to 60mm thick Sqm 180

6

Supply and istallation whiteredapproved shade sandstone dustbin of size 800 mm x 450 mm and height 850 mm with hollow center to hang MS Dustbin of size 400mmx 500mmx 600 mm made of 1mm thick metal sheet fixed to stone pillars with MS chain edged with 50x50x5 mm angle sections including cutting welding and fabrication with priming coat of red oxide and approved ready mix paint of approved shadeStone peices joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 26

29

7

Supply and istallation of RedWhiteapproved shade stone bench of size 1500mmx450mmx450 mm horizontal stone members of size 300mmx400mmx450mm on two sides supporting the horizontal seating stone of 150 mm thickness fixed to vertical stone members joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 35

8

Poviding fixing testing and commisioning of Stainless Steel body bull Storage Capacity in (litres) 150 bull Nominal Cooling Capacity (Litreshr) 150 bull No Of Faucets 2 bull Dimensions 820W x 700D x 1235 H bull Normal Demand (glasses hr) 750 bull Refrigerant R-22 bull Current (Amps) 749 bull Water Overflow (Connections) 12 BSP bull Type Of Compressor Rotary Model No- SDLX15150A make Blue star or similar in make of VoltasOasis

Each 4

9

Providing fixing testing and commissioning of water purification system having auto shut-off e-boiling Voltage Stabilizer bull Type of Treatment- sediment filter active carbon cartridge mineral guard UV chamber bull water flow rate 3ltrminbull ultra- violet lamp of 16 watts bull power rating of 35watt bull Dimensions 355H x 1025D x 307WModel ndash Hi fio Make Eureka Forbes- aquagard or similar in make of livpurekent

Each 4

10

Demolishion of the existing bituminous road surface to a depth of 150 mm and disposal of demolished material with a lift upto 3 m and lead upto 1000 m

Sqm 50

11

Providing and fixing fine dressed sand stone flooring with white sand stone (Bansh paharpurdholpur stone) (panji marked surface) machine cut of approved shade set in pattern over 30mm thick base in cement mortar 16 including pointing with cement mortar 12 (1 cement2 stone dust) mixed with pigment to match the shade of stone with joint thickness upto 5 mm as per existing flloringsample approved by the consultantapproved by (75mm thick)

Sqm 730

12

Providing and Fixing Cobbles stone of lime sand stone size 100X100MM and theakness of 70 to100mm on path way open court yards of color shade approved by the consultant over cement mortar 13 ( 1 cement3 course sand) keeping 10mm joint between cobbles filled with cement mortar 13 ( 1 cement3 course sand) the mortar should remain recessed by 5mm from the top surface of the cobble stone complete in all respects as per design and details provided by the consultant

Sqm 1650

13

Supply and installation of sanstone signage 450x200 mm of redwhiteapproved shade Sandstone 75 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete with fixing with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 6

30

14

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 450mmx2400mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved with ornamentation in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

15

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 650mmx1200mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

16

Heritage signage shall be etched on to Dulmera stone plaque of size 18m x 14m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 4

17

Signage shall be etched on to Dulmera stone plaque of size 18m x 10m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 12

18

Providing and fixing MS steel sheets 3 mm thickness on to MS anfgles flats tees and hollow sections with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Kg 10640

19

Providing and fixing MS perforated sheets 3 mm thickness with diamondround shaped perforations as per sample approved by the consultant with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Sqm 90

20

Painting of shop signages with lettering in hindienglish and ornamental design patterns in ready mix paint of approved brand and manfacture in all shades to give an even shade as per drawings and details provided by the consultant

Sqm 560

21

Flush pointing over joints of dressed stone cladding chajjas jali etc with neat cement sand amp colour including racking the joints as per Jodhpur practice including all leads and lifts with grinded mortar of lime putty and stone powder mixed in 11 ratio and gur methi gugal etc are to be mixed as per old traditional practice

Sqm 75

22

Khamira Colour Washing as per old traditional practice to prepare the Khamira the lime should be slaked at least for 7-10 days and regularly it should be stirred by adding cured Gugal for non-synthetic colour adding gum (babool gum) as per specificationThen applying prepared solution on walls three to four thin coats as desired finishing

Sqm 1750

31

23

Providing amp applying Lime kara 12 (1lime cream 2 Zikki powder) grinding mortar with grinding millmanually on lime baseon all flat surface in two coatsFirst coat applying 3mm to 4mm thick and curing properly at least 7 dayssecond finishing coat done after 7days of previous coat as per traditional practice(thickness not more than 6 mm)

Sqm 155

TOTAL OF NON SOR WORKS

12

Signature of Contractor

27 Period of maintenance and Defects liability

The Contractor shall be responsible to make good within such period as maybe stipulated by the Engineer in-charge any

defect which may develop or may be noticed during period of maintenance of 12 months from the certified date of

completion and which is attributable to the contractor All notice of such defect shall be given to the Contractor promptly In

case the contractor fails to make good the defects the Engineer in-charge may employ other persons to make good such

defects and all expenses consequent thereof and incidental thereto shall be recoverable from the Contractor In the event

the employer takes over portions of work as they are completed the liability of the contractor under this clause for these

portions shall extend to a period of 24 months from the actual dates on which portions of the works are taken over

28 The successful biddercontractor is required to undertake detailed photo recording documentation by still photography

videography of the entire work prior to commencement and the same has to be deposited with the Engineer in charge of

RAJASTHAN TOURISM DEVELOPMENT CORPORATION JAIPUR in two copies immediately Before dismantling any old

work to redo this still photography with specifically putting some identity mark number of the portion by any specified means

has to be done and this to be got checked and certified by Engineer In charge and recorded specifically in the measurement

book (MB) A written permission from the Engineer in charge before commencement of executing such work is essential for

execution as well as for payments

During the work in progress and after its completion also photo documentation is necessary and the photos before amp after

completion of portion of work are essentially to be enclosed with the bill for payment

Signature of Contractor

GENERAL MANAGER (WORKS)

13

SCHEDULE-I

FINANCIAL RESOURCES AND CAPABILITY

(PURSUANT TO CLAUSE 26) 1 Name of Applicant

2 Name of Partner Director

3 Capital

(a) Authorised

(b) ii

4 (a) WhetheCategory of Enlisted in Govt

(b) Details Details of the work completed and applicants performance record for last five years

(information to be furnished in Schedule II in India

(c) Details of works in hand applicants performance record for last five years (Information to be

furnished in Schedule-III)

5 Furnish Balance Sheet and profit and loss statement with auditorrsquos report for the last three years

6 The information on the following aspects should be specifically furnished

(i) Working capital and net worth

(ii) Turnover for the years

a

b

c

(iii) Gross income in years in India

(i)

(ii)

(iii)

(iv) Quick ratio or acid test ration (Quick assets to current liabilities)

7 What is the maximum annual turnover of the project that you can handle (Financial Projection)

8 Have you ever been denied tendering facilities by any Governmental DepartmentPublic Sector

undertaking

(If yes Please give details)

9 List of your source of finance

10 Certificate of financial soundness by Bank

11 Name and address of Bank from whom reference can be obtained

12 Have you ever been declared bankrupt

(if yes please give details)

Signature of Contractor

14

SCHEDULE-II WORKS OF SIMILAR MAGNITUDE TO THE WORK UNDER CONSIDERATION COMPLETED BY THE

APPLICANT IN LAST FIVE YEARS IN INDIA

(Pursuant to Clause 26)

SNo Na

me

of

wor

k

Place

amp

State

Tender

awardi

ng

Agency

Tender

ed Cost

Stipulate

d time of

Completi

on

Time in

which

complete

d

Date

of

comp

letion

Reason

for

Delay

Principal

features

of work

done

Value of

work done

1 2 3 4 5 6 7 8 9 10 11

Year

Year

Year

Signature of Contractor

15

SCHEDULE-III WORKS TENDERED FOR amp WORKS TO BE COMPLETED AS ON THE DATE OF SUBMISSION OF

APPLICATION IN INDIA

(pursuant Clause 26)

SNo Name

of

work

Place

amp

State

Work on Hand Work tendered for

Tender

Cost amp

Date

or

award

Stipulated

period of

Completion

Cost of

work

remaining

to be

executed

Antici

pated

Date

of

compl

eted

Estimate

d cost

(Rs In

Lakh)

Date

when

decisio

n

expecte

d

Stipulate

d Date

period of

Completi

on

Remar

ks

1 2 3 4 5 6 7 8 9 10 11

Year

Year

Year

Signature of Contractor

16

SCHEDULE- IV

Details of Key Personnel intended to be employed for this work

(use separate sheet if necessary)

(Pursuant to clause 26)

S No Name of Person Qualification Designation Experience Work to be

put on

A Technical Personnel

(1)

(2)

(3)

(4)

B Administrative Personnel

(1)

(2)

(3)

(4)

C Master Craftsmen

(1)

(2)

(3)

(4)

D Craftsmen

(1)

(2)

(3)

(4)

E Any other (1)

(2)

(3)

(4)

Signature of Contractor

17

SCHEDULE- V

DETAILS OF MAJOR ITEMS OF CONSTRUCTION PLANT AVAILABLE FOR THIS WORK

S No

Particulars Make Year of manufacture

Nos Whether owned or confirmed lease

1 Lime mortar Mill

2 Scaffolding Material

3 Movable Gantry

Crane etc

4 Any other TampP for

the purpose

5

6

7

8

Signature of Contractor

18

RAJASTHAN TOURISM DEVELOPMENT CORPORATION LIMITED JAIPUR

(WORKS DIVISION)

TENDER DOCUMENT (Financial Bid)

E-Tender (NIT No) 082016-17

Name of work- Pushkar Market Street- Restoration And Development Works

Restoration Conservation work Stained GssMirror

Signature of Contractor

19

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works

(Based on PWD BSR CIVILElectrical Ajmer Circle - 2013 and item rates)

SCHEDULE -G

GENERAL ABSTRACT

SNO WORK AMOUNT

1

PART A- CIVIL WORKS BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

304610000

2

PART B- SANITARY WORKS BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

5936400

3

PART C- HORTICULTURE BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

2627500

4

PART D-NON BSR ITEMS ( CIVIL AND ELECTRICAL)

GRAND TOTAL

I we hereby agree to execute the work PART A In figures Above Below In words

Above below PART B In figures Above Below In words

Above below PART C In figures Above Below In words

Above below PART D In figures Above Below In words

Above below

General Manager Works

RTDC Ltd Jaipur

Signature of the Contractor With Full Postal Address

20

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works

(Based on PWD BSR Civil Ajmer Circle - 2013)

PART A- CIVIL WORKS

SL No Specification Unit Rate QTY Amount

1

Surface Dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr and lift up to 15 Mtr All kinds of soil 100Sqm 437

26

11362

2

Surface Dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr and lift up to 15 Mtr All kinds of soil Cum 127

30

3810

3

Filling available excavated earth (excluding rock) in trenches plinth side of foundation etc in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift Cum 61

12 732

4

Providing and laying in position cement concrete including curing compaction etc complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level

M15 grade Nominal Mix (with graded stone aggregate 20mm nominal size) Cum

3438

230

790740

5

Random Rubble stone masonry for foundation and plinth in Cement Sand mortar above 30 CM thick wall in

21

Cement Mortar 13 ( 1-Cement 3-Sand) Cum

2193

35

76755

6

Random Rubble stone masonry for superstructure above plinth level one storey height above 30cm thick walls in

Cement Mortar 13 ( 1-Cement 3-Sand) Cum

2686

135

362610

7

Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor three level including curing compaction finishing with rendering in cement sand mortar 13 (1 cement 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement for -

Beams suspended floors roofs griders having slopes up to 15ordm landings balconies shelves chajjas lintels bands plain windows sills staircases and spiral staircases etc

M20 grade Nominal Mix

Cum 5138

45

231210

8

Centering amp shuttering with plywood or steel sheets including strutting propping bracing both ways with wooden members and removal of formwork for upto floor three level for

Suspended floors roofs landings staircases balconies girders cantilevers bands coping bed plates anchor blocks sills chhajjas lintel beam etc Sqm 222

60

13320

9

Providing and fabricating reinforcement using steel of SAILVIZAK-RINLTATA TISCONESSARZINDAL VIJAINAGAR IS 1786-1986 for RCC work including straightening cutting bending placing in position and binding (including cost of binding wire) all complete up to floor three level

22

Thermo-Mechanically Treated bars (Conforming of relevent IS code) Kg 78

2630

205140

10

Plaster on new surface on wall in cement sand mortar 13 including racking of joints etc complete fine finish

20mm thick Sqm 161

150

24150

11

6mm thick cement plaster to ceiling of mix 13 (1cement 3 fine sand) Sqm 105

25

2625

12

Polished Blue Kota Stone flooring skirting laid over 20mm thick base of CM 14 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete

13

For area of each slab from 2001 to 5000 SqCm

30mm thick slab

Sqm 988

35

34580

14

Wall Painting with plastic emulsion paint of approved brand and manufacture to give an even shade

Two or more coats on new work including preparation of base with primer putty lippy complete in all respect Sqm 82

76

6232

15

Applying Exterior Emulsion Paint like ACE APEX or equivalent brand and manufacture of required shade to give an even shade including all scaffolding on prepared surface (excluding water primer)

New Work (Two or more coats) Sqm 119

28

3332

16

Applying one coat of Asian Paints DECO Primer (Water thinnable) of approved brand amp manufacture ic scrapping by sand papering and preparing the even surface on wallwall putty as base for ACE APEX or APEX ULTIMA ic all scaffolding(New Surface) Sqm 24

104

2496

23

17

providing and fixing steel gategrating and grills made of anglesteessqure bars flats or blackpipe with holdfast and fitting complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide kg 83

1250

103750

Demolishing cement concrete including disposal of material with in 50 meter lead

136 or richer mix Cum 319

30

9570

148 or leaner mix Cum 311

20

6220

18

Demolishing RCC work manually by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge

Cum 1085

30

32550

19

Rough chisel dressed stone flooring over 20mm (Av) thick base in CM 16 including pointing with cement mortar 12 (1 cement 2 stone dust) with and admixture of pigment to match the shade of stone with joint thickness upto 15mm

45mm thick red sand stone

Sqm 385

230

88550

20

Providing and fixing 1st quality standard white grey ivory fume red brown light green light blue and other light shades glazed tiles confirming to IS 13753 amp IS 15622 of size 300mm x 200mm in walls floors steps pillars etc laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar)

Catogary-A Kajaria Johnson Somani Orient make Sqm 763

25

19075

24

21

Applying one coat industrial grade bitumen of penetration 2585 of approved quality using 170 kg per Sqm on Damp Proof Coarse after cleaning the surface with brushes and finally with a piece of cloth slightly soaked in kerosene oil Sqm 103

45

4635

22

Providing and Fixing 30 too 40 mm thickk stone chajjas in cement sand mortar 14 including making gola at junction with wall concrete M-15 grade (124 nominal mix drip course

20 mm thick plastering in CM 16 on both Sqm 645

35

22575

23

Providing and fixing steel gate grating and grills made of angles tees square bars flatsor black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide

Kg 83

9750

809250

24

Extra if squarerectangular hollow tubelar sections are used or grill made by flats only

Kg

10

6490

64251

P amp F bolts including nuts and bolts complete

Kg 57

240

13680

25

Painting with ready mix paint of approved brand and manufacture in all shades to give an even shade

New Steel Work Sqm 40

1500

60000

Welding by electric plant cmlength 286

15000

42900

TOTAL OF BSR WORKS CIVIL

3046100

25

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - B- SANITARY WORKS

SL No Specification Unit Rate QTY Amount

1

P amp F GI Pipes (External Work) with GI Fittings excluding union (IS 1239 Mark) including trenching amp refilling earth etc

40mm dia nominal bore A Class

Mtr 338

32 10816

25mm dia nominal bore A Class

Mtr 182

48 8736

2

Making connection of GI distribution Branch with GI main including all Fitting

Beyond 25mm amp upto 100mm dia Each 332 8 2656

3

P amp F Sand ndashcast Floor Trap (Nahni) of (IS1729 mark) of approved qualitymake with socket down or hinged grating including cutting and making good the floor- 100 x 100mm Each

421

4 1684

4

P amp F Gun-metal Full-way Valve (IS778 Mark) or wheel valve of approved make

Gun metal 25mm nominal bore Each 702 4 2808

Gun metal 40mm nominal bore Each 1065 4 4260

5

P amp F PVC Storage Tank ISI Marked (IS 12701) indicating the BIS license No) of approved make with cover 25mm dia 1M long GI over-flow pipe amp 25 Cm long wash out pipe with plug amp socket including making connection etc complete of approved design

1000 litres capacity Each 5437 4 21748

6

P amp F push cock superior quality of approved make

CP brass 15 mm

Each 416

16 6656

TOTAL 5936400

26

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - C-HOTICULTURE WORKS

SL No Specification Unit Rate QTY Amount

1

Supply of dry manure including loading unloading transportation amp stacking at site

Goat dungmanure

Cum

50000

35

17500

2

Supply amp Stacking good earth at site complete including loading unloading amp transportation etc Cum

7500

55

4125

3

Supply of different varities of treeshrubsclimbers according to height and age of the plant at site including loadingunloading amp transportation etc complete

Different flowing plants 900mm to 1500mm Each

1500

115

1725

4

Supply of different varities of bougainvillea in poly bagsearthen pots according to height growth amp age of plant at site including loadingunloading amp transportation etc complete

Local variety of bougainvillea 600 mm to 900mm Each

1500

75

1125

5

Digging pits in ordinary soil amp refilling the same with the excavated earth mixed with manure in the ratio 21 by volume (2 parts of stacked volume of earth after reduction by 20 1 parts of stacked volume of manure after reduction by 8) flooding with water and dressing including removal of surplus earth Each

1000

150

1500

27

(Cost of manure or extra good earth if needed to be paid separately) pit dia 60 cm X 60 cm deep

6

Spreading of manure and good earth in required thickness (cost of manure and good earth to be paid separately) Cum

400

75

300

TOTAL OF HORTICULTURE WORKS

26275

28

SCHEDULE OF QUANTITIES

Name of work Pushkar Market Street- Restoration And Development Works

(Based on item rates)

PART - D- NON SOR WORKS

SL No

Specification Unit Rate to

be Quoted

QTY

Amount

1

Providing and fixing fine dressed sand stoneapproved stone JALIas per existing matching geometrical design including moulding work with fine finishing fixing with thambli by proper adhesive and white cement with pigment including making groove etc complete in all respect

(b) 50mm thick Sqm 45

2

Providing amp fixing ashlar Rain water Spouts (3) lines dressed as per traditional practice existing design approved design size 60 x 30 x 25 cm fixing the rain water spout with lime surkhi mortar 12 with proper slope complete in all respect Each

12

3

Providing amp fixing ornamental stone cladding of approved sand stone with dressing complete as per existing designpatternapproved designfixing with 30mm thickgrinded lime surkhi mortar 12 amp pointing with white cement with araldite and pigment to match shade the stone complete in all respect as per direction of Engineer incharge(75mm thick) Sqm

54

4

Providing and fixing fine dressed sand stone Dasacoping as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect

(c) 75mm to 100mm thick with pan patti design Sqm 320

5

Providing and fixing fine dressed sand stone Cladding (Plain dressing only) as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect including removal of damaged cladding

(a) 50mm to 60mm thick Sqm 180

6

Supply and istallation whiteredapproved shade sandstone dustbin of size 800 mm x 450 mm and height 850 mm with hollow center to hang MS Dustbin of size 400mmx 500mmx 600 mm made of 1mm thick metal sheet fixed to stone pillars with MS chain edged with 50x50x5 mm angle sections including cutting welding and fabrication with priming coat of red oxide and approved ready mix paint of approved shadeStone peices joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 26

29

7

Supply and istallation of RedWhiteapproved shade stone bench of size 1500mmx450mmx450 mm horizontal stone members of size 300mmx400mmx450mm on two sides supporting the horizontal seating stone of 150 mm thickness fixed to vertical stone members joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 35

8

Poviding fixing testing and commisioning of Stainless Steel body bull Storage Capacity in (litres) 150 bull Nominal Cooling Capacity (Litreshr) 150 bull No Of Faucets 2 bull Dimensions 820W x 700D x 1235 H bull Normal Demand (glasses hr) 750 bull Refrigerant R-22 bull Current (Amps) 749 bull Water Overflow (Connections) 12 BSP bull Type Of Compressor Rotary Model No- SDLX15150A make Blue star or similar in make of VoltasOasis

Each 4

9

Providing fixing testing and commissioning of water purification system having auto shut-off e-boiling Voltage Stabilizer bull Type of Treatment- sediment filter active carbon cartridge mineral guard UV chamber bull water flow rate 3ltrminbull ultra- violet lamp of 16 watts bull power rating of 35watt bull Dimensions 355H x 1025D x 307WModel ndash Hi fio Make Eureka Forbes- aquagard or similar in make of livpurekent

Each 4

10

Demolishion of the existing bituminous road surface to a depth of 150 mm and disposal of demolished material with a lift upto 3 m and lead upto 1000 m

Sqm 50

11

Providing and fixing fine dressed sand stone flooring with white sand stone (Bansh paharpurdholpur stone) (panji marked surface) machine cut of approved shade set in pattern over 30mm thick base in cement mortar 16 including pointing with cement mortar 12 (1 cement2 stone dust) mixed with pigment to match the shade of stone with joint thickness upto 5 mm as per existing flloringsample approved by the consultantapproved by (75mm thick)

Sqm 730

12

Providing and Fixing Cobbles stone of lime sand stone size 100X100MM and theakness of 70 to100mm on path way open court yards of color shade approved by the consultant over cement mortar 13 ( 1 cement3 course sand) keeping 10mm joint between cobbles filled with cement mortar 13 ( 1 cement3 course sand) the mortar should remain recessed by 5mm from the top surface of the cobble stone complete in all respects as per design and details provided by the consultant

Sqm 1650

13

Supply and installation of sanstone signage 450x200 mm of redwhiteapproved shade Sandstone 75 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete with fixing with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 6

30

14

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 450mmx2400mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved with ornamentation in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

15

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 650mmx1200mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

16

Heritage signage shall be etched on to Dulmera stone plaque of size 18m x 14m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 4

17

Signage shall be etched on to Dulmera stone plaque of size 18m x 10m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 12

18

Providing and fixing MS steel sheets 3 mm thickness on to MS anfgles flats tees and hollow sections with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Kg 10640

19

Providing and fixing MS perforated sheets 3 mm thickness with diamondround shaped perforations as per sample approved by the consultant with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Sqm 90

20

Painting of shop signages with lettering in hindienglish and ornamental design patterns in ready mix paint of approved brand and manfacture in all shades to give an even shade as per drawings and details provided by the consultant

Sqm 560

21

Flush pointing over joints of dressed stone cladding chajjas jali etc with neat cement sand amp colour including racking the joints as per Jodhpur practice including all leads and lifts with grinded mortar of lime putty and stone powder mixed in 11 ratio and gur methi gugal etc are to be mixed as per old traditional practice

Sqm 75

22

Khamira Colour Washing as per old traditional practice to prepare the Khamira the lime should be slaked at least for 7-10 days and regularly it should be stirred by adding cured Gugal for non-synthetic colour adding gum (babool gum) as per specificationThen applying prepared solution on walls three to four thin coats as desired finishing

Sqm 1750

31

23

Providing amp applying Lime kara 12 (1lime cream 2 Zikki powder) grinding mortar with grinding millmanually on lime baseon all flat surface in two coatsFirst coat applying 3mm to 4mm thick and curing properly at least 7 dayssecond finishing coat done after 7days of previous coat as per traditional practice(thickness not more than 6 mm)

Sqm 155

TOTAL OF NON SOR WORKS

13

SCHEDULE-I

FINANCIAL RESOURCES AND CAPABILITY

(PURSUANT TO CLAUSE 26) 1 Name of Applicant

2 Name of Partner Director

3 Capital

(a) Authorised

(b) ii

4 (a) WhetheCategory of Enlisted in Govt

(b) Details Details of the work completed and applicants performance record for last five years

(information to be furnished in Schedule II in India

(c) Details of works in hand applicants performance record for last five years (Information to be

furnished in Schedule-III)

5 Furnish Balance Sheet and profit and loss statement with auditorrsquos report for the last three years

6 The information on the following aspects should be specifically furnished

(i) Working capital and net worth

(ii) Turnover for the years

a

b

c

(iii) Gross income in years in India

(i)

(ii)

(iii)

(iv) Quick ratio or acid test ration (Quick assets to current liabilities)

7 What is the maximum annual turnover of the project that you can handle (Financial Projection)

8 Have you ever been denied tendering facilities by any Governmental DepartmentPublic Sector

undertaking

(If yes Please give details)

9 List of your source of finance

10 Certificate of financial soundness by Bank

11 Name and address of Bank from whom reference can be obtained

12 Have you ever been declared bankrupt

(if yes please give details)

Signature of Contractor

14

SCHEDULE-II WORKS OF SIMILAR MAGNITUDE TO THE WORK UNDER CONSIDERATION COMPLETED BY THE

APPLICANT IN LAST FIVE YEARS IN INDIA

(Pursuant to Clause 26)

SNo Na

me

of

wor

k

Place

amp

State

Tender

awardi

ng

Agency

Tender

ed Cost

Stipulate

d time of

Completi

on

Time in

which

complete

d

Date

of

comp

letion

Reason

for

Delay

Principal

features

of work

done

Value of

work done

1 2 3 4 5 6 7 8 9 10 11

Year

Year

Year

Signature of Contractor

15

SCHEDULE-III WORKS TENDERED FOR amp WORKS TO BE COMPLETED AS ON THE DATE OF SUBMISSION OF

APPLICATION IN INDIA

(pursuant Clause 26)

SNo Name

of

work

Place

amp

State

Work on Hand Work tendered for

Tender

Cost amp

Date

or

award

Stipulated

period of

Completion

Cost of

work

remaining

to be

executed

Antici

pated

Date

of

compl

eted

Estimate

d cost

(Rs In

Lakh)

Date

when

decisio

n

expecte

d

Stipulate

d Date

period of

Completi

on

Remar

ks

1 2 3 4 5 6 7 8 9 10 11

Year

Year

Year

Signature of Contractor

16

SCHEDULE- IV

Details of Key Personnel intended to be employed for this work

(use separate sheet if necessary)

(Pursuant to clause 26)

S No Name of Person Qualification Designation Experience Work to be

put on

A Technical Personnel

(1)

(2)

(3)

(4)

B Administrative Personnel

(1)

(2)

(3)

(4)

C Master Craftsmen

(1)

(2)

(3)

(4)

D Craftsmen

(1)

(2)

(3)

(4)

E Any other (1)

(2)

(3)

(4)

Signature of Contractor

17

SCHEDULE- V

DETAILS OF MAJOR ITEMS OF CONSTRUCTION PLANT AVAILABLE FOR THIS WORK

S No

Particulars Make Year of manufacture

Nos Whether owned or confirmed lease

1 Lime mortar Mill

2 Scaffolding Material

3 Movable Gantry

Crane etc

4 Any other TampP for

the purpose

5

6

7

8

Signature of Contractor

18

RAJASTHAN TOURISM DEVELOPMENT CORPORATION LIMITED JAIPUR

(WORKS DIVISION)

TENDER DOCUMENT (Financial Bid)

E-Tender (NIT No) 082016-17

Name of work- Pushkar Market Street- Restoration And Development Works

Restoration Conservation work Stained GssMirror

Signature of Contractor

19

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works

(Based on PWD BSR CIVILElectrical Ajmer Circle - 2013 and item rates)

SCHEDULE -G

GENERAL ABSTRACT

SNO WORK AMOUNT

1

PART A- CIVIL WORKS BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

304610000

2

PART B- SANITARY WORKS BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

5936400

3

PART C- HORTICULTURE BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

2627500

4

PART D-NON BSR ITEMS ( CIVIL AND ELECTRICAL)

GRAND TOTAL

I we hereby agree to execute the work PART A In figures Above Below In words

Above below PART B In figures Above Below In words

Above below PART C In figures Above Below In words

Above below PART D In figures Above Below In words

Above below

General Manager Works

RTDC Ltd Jaipur

Signature of the Contractor With Full Postal Address

20

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works

(Based on PWD BSR Civil Ajmer Circle - 2013)

PART A- CIVIL WORKS

SL No Specification Unit Rate QTY Amount

1

Surface Dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr and lift up to 15 Mtr All kinds of soil 100Sqm 437

26

11362

2

Surface Dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr and lift up to 15 Mtr All kinds of soil Cum 127

30

3810

3

Filling available excavated earth (excluding rock) in trenches plinth side of foundation etc in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift Cum 61

12 732

4

Providing and laying in position cement concrete including curing compaction etc complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level

M15 grade Nominal Mix (with graded stone aggregate 20mm nominal size) Cum

3438

230

790740

5

Random Rubble stone masonry for foundation and plinth in Cement Sand mortar above 30 CM thick wall in

21

Cement Mortar 13 ( 1-Cement 3-Sand) Cum

2193

35

76755

6

Random Rubble stone masonry for superstructure above plinth level one storey height above 30cm thick walls in

Cement Mortar 13 ( 1-Cement 3-Sand) Cum

2686

135

362610

7

Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor three level including curing compaction finishing with rendering in cement sand mortar 13 (1 cement 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement for -

Beams suspended floors roofs griders having slopes up to 15ordm landings balconies shelves chajjas lintels bands plain windows sills staircases and spiral staircases etc

M20 grade Nominal Mix

Cum 5138

45

231210

8

Centering amp shuttering with plywood or steel sheets including strutting propping bracing both ways with wooden members and removal of formwork for upto floor three level for

Suspended floors roofs landings staircases balconies girders cantilevers bands coping bed plates anchor blocks sills chhajjas lintel beam etc Sqm 222

60

13320

9

Providing and fabricating reinforcement using steel of SAILVIZAK-RINLTATA TISCONESSARZINDAL VIJAINAGAR IS 1786-1986 for RCC work including straightening cutting bending placing in position and binding (including cost of binding wire) all complete up to floor three level

22

Thermo-Mechanically Treated bars (Conforming of relevent IS code) Kg 78

2630

205140

10

Plaster on new surface on wall in cement sand mortar 13 including racking of joints etc complete fine finish

20mm thick Sqm 161

150

24150

11

6mm thick cement plaster to ceiling of mix 13 (1cement 3 fine sand) Sqm 105

25

2625

12

Polished Blue Kota Stone flooring skirting laid over 20mm thick base of CM 14 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete

13

For area of each slab from 2001 to 5000 SqCm

30mm thick slab

Sqm 988

35

34580

14

Wall Painting with plastic emulsion paint of approved brand and manufacture to give an even shade

Two or more coats on new work including preparation of base with primer putty lippy complete in all respect Sqm 82

76

6232

15

Applying Exterior Emulsion Paint like ACE APEX or equivalent brand and manufacture of required shade to give an even shade including all scaffolding on prepared surface (excluding water primer)

New Work (Two or more coats) Sqm 119

28

3332

16

Applying one coat of Asian Paints DECO Primer (Water thinnable) of approved brand amp manufacture ic scrapping by sand papering and preparing the even surface on wallwall putty as base for ACE APEX or APEX ULTIMA ic all scaffolding(New Surface) Sqm 24

104

2496

23

17

providing and fixing steel gategrating and grills made of anglesteessqure bars flats or blackpipe with holdfast and fitting complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide kg 83

1250

103750

Demolishing cement concrete including disposal of material with in 50 meter lead

136 or richer mix Cum 319

30

9570

148 or leaner mix Cum 311

20

6220

18

Demolishing RCC work manually by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge

Cum 1085

30

32550

19

Rough chisel dressed stone flooring over 20mm (Av) thick base in CM 16 including pointing with cement mortar 12 (1 cement 2 stone dust) with and admixture of pigment to match the shade of stone with joint thickness upto 15mm

45mm thick red sand stone

Sqm 385

230

88550

20

Providing and fixing 1st quality standard white grey ivory fume red brown light green light blue and other light shades glazed tiles confirming to IS 13753 amp IS 15622 of size 300mm x 200mm in walls floors steps pillars etc laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar)

Catogary-A Kajaria Johnson Somani Orient make Sqm 763

25

19075

24

21

Applying one coat industrial grade bitumen of penetration 2585 of approved quality using 170 kg per Sqm on Damp Proof Coarse after cleaning the surface with brushes and finally with a piece of cloth slightly soaked in kerosene oil Sqm 103

45

4635

22

Providing and Fixing 30 too 40 mm thickk stone chajjas in cement sand mortar 14 including making gola at junction with wall concrete M-15 grade (124 nominal mix drip course

20 mm thick plastering in CM 16 on both Sqm 645

35

22575

23

Providing and fixing steel gate grating and grills made of angles tees square bars flatsor black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide

Kg 83

9750

809250

24

Extra if squarerectangular hollow tubelar sections are used or grill made by flats only

Kg

10

6490

64251

P amp F bolts including nuts and bolts complete

Kg 57

240

13680

25

Painting with ready mix paint of approved brand and manufacture in all shades to give an even shade

New Steel Work Sqm 40

1500

60000

Welding by electric plant cmlength 286

15000

42900

TOTAL OF BSR WORKS CIVIL

3046100

25

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - B- SANITARY WORKS

SL No Specification Unit Rate QTY Amount

1

P amp F GI Pipes (External Work) with GI Fittings excluding union (IS 1239 Mark) including trenching amp refilling earth etc

40mm dia nominal bore A Class

Mtr 338

32 10816

25mm dia nominal bore A Class

Mtr 182

48 8736

2

Making connection of GI distribution Branch with GI main including all Fitting

Beyond 25mm amp upto 100mm dia Each 332 8 2656

3

P amp F Sand ndashcast Floor Trap (Nahni) of (IS1729 mark) of approved qualitymake with socket down or hinged grating including cutting and making good the floor- 100 x 100mm Each

421

4 1684

4

P amp F Gun-metal Full-way Valve (IS778 Mark) or wheel valve of approved make

Gun metal 25mm nominal bore Each 702 4 2808

Gun metal 40mm nominal bore Each 1065 4 4260

5

P amp F PVC Storage Tank ISI Marked (IS 12701) indicating the BIS license No) of approved make with cover 25mm dia 1M long GI over-flow pipe amp 25 Cm long wash out pipe with plug amp socket including making connection etc complete of approved design

1000 litres capacity Each 5437 4 21748

6

P amp F push cock superior quality of approved make

CP brass 15 mm

Each 416

16 6656

TOTAL 5936400

26

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - C-HOTICULTURE WORKS

SL No Specification Unit Rate QTY Amount

1

Supply of dry manure including loading unloading transportation amp stacking at site

Goat dungmanure

Cum

50000

35

17500

2

Supply amp Stacking good earth at site complete including loading unloading amp transportation etc Cum

7500

55

4125

3

Supply of different varities of treeshrubsclimbers according to height and age of the plant at site including loadingunloading amp transportation etc complete

Different flowing plants 900mm to 1500mm Each

1500

115

1725

4

Supply of different varities of bougainvillea in poly bagsearthen pots according to height growth amp age of plant at site including loadingunloading amp transportation etc complete

Local variety of bougainvillea 600 mm to 900mm Each

1500

75

1125

5

Digging pits in ordinary soil amp refilling the same with the excavated earth mixed with manure in the ratio 21 by volume (2 parts of stacked volume of earth after reduction by 20 1 parts of stacked volume of manure after reduction by 8) flooding with water and dressing including removal of surplus earth Each

1000

150

1500

27

(Cost of manure or extra good earth if needed to be paid separately) pit dia 60 cm X 60 cm deep

6

Spreading of manure and good earth in required thickness (cost of manure and good earth to be paid separately) Cum

400

75

300

TOTAL OF HORTICULTURE WORKS

26275

28

SCHEDULE OF QUANTITIES

Name of work Pushkar Market Street- Restoration And Development Works

(Based on item rates)

PART - D- NON SOR WORKS

SL No

Specification Unit Rate to

be Quoted

QTY

Amount

1

Providing and fixing fine dressed sand stoneapproved stone JALIas per existing matching geometrical design including moulding work with fine finishing fixing with thambli by proper adhesive and white cement with pigment including making groove etc complete in all respect

(b) 50mm thick Sqm 45

2

Providing amp fixing ashlar Rain water Spouts (3) lines dressed as per traditional practice existing design approved design size 60 x 30 x 25 cm fixing the rain water spout with lime surkhi mortar 12 with proper slope complete in all respect Each

12

3

Providing amp fixing ornamental stone cladding of approved sand stone with dressing complete as per existing designpatternapproved designfixing with 30mm thickgrinded lime surkhi mortar 12 amp pointing with white cement with araldite and pigment to match shade the stone complete in all respect as per direction of Engineer incharge(75mm thick) Sqm

54

4

Providing and fixing fine dressed sand stone Dasacoping as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect

(c) 75mm to 100mm thick with pan patti design Sqm 320

5

Providing and fixing fine dressed sand stone Cladding (Plain dressing only) as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect including removal of damaged cladding

(a) 50mm to 60mm thick Sqm 180

6

Supply and istallation whiteredapproved shade sandstone dustbin of size 800 mm x 450 mm and height 850 mm with hollow center to hang MS Dustbin of size 400mmx 500mmx 600 mm made of 1mm thick metal sheet fixed to stone pillars with MS chain edged with 50x50x5 mm angle sections including cutting welding and fabrication with priming coat of red oxide and approved ready mix paint of approved shadeStone peices joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 26

29

7

Supply and istallation of RedWhiteapproved shade stone bench of size 1500mmx450mmx450 mm horizontal stone members of size 300mmx400mmx450mm on two sides supporting the horizontal seating stone of 150 mm thickness fixed to vertical stone members joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 35

8

Poviding fixing testing and commisioning of Stainless Steel body bull Storage Capacity in (litres) 150 bull Nominal Cooling Capacity (Litreshr) 150 bull No Of Faucets 2 bull Dimensions 820W x 700D x 1235 H bull Normal Demand (glasses hr) 750 bull Refrigerant R-22 bull Current (Amps) 749 bull Water Overflow (Connections) 12 BSP bull Type Of Compressor Rotary Model No- SDLX15150A make Blue star or similar in make of VoltasOasis

Each 4

9

Providing fixing testing and commissioning of water purification system having auto shut-off e-boiling Voltage Stabilizer bull Type of Treatment- sediment filter active carbon cartridge mineral guard UV chamber bull water flow rate 3ltrminbull ultra- violet lamp of 16 watts bull power rating of 35watt bull Dimensions 355H x 1025D x 307WModel ndash Hi fio Make Eureka Forbes- aquagard or similar in make of livpurekent

Each 4

10

Demolishion of the existing bituminous road surface to a depth of 150 mm and disposal of demolished material with a lift upto 3 m and lead upto 1000 m

Sqm 50

11

Providing and fixing fine dressed sand stone flooring with white sand stone (Bansh paharpurdholpur stone) (panji marked surface) machine cut of approved shade set in pattern over 30mm thick base in cement mortar 16 including pointing with cement mortar 12 (1 cement2 stone dust) mixed with pigment to match the shade of stone with joint thickness upto 5 mm as per existing flloringsample approved by the consultantapproved by (75mm thick)

Sqm 730

12

Providing and Fixing Cobbles stone of lime sand stone size 100X100MM and theakness of 70 to100mm on path way open court yards of color shade approved by the consultant over cement mortar 13 ( 1 cement3 course sand) keeping 10mm joint between cobbles filled with cement mortar 13 ( 1 cement3 course sand) the mortar should remain recessed by 5mm from the top surface of the cobble stone complete in all respects as per design and details provided by the consultant

Sqm 1650

13

Supply and installation of sanstone signage 450x200 mm of redwhiteapproved shade Sandstone 75 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete with fixing with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 6

30

14

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 450mmx2400mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved with ornamentation in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

15

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 650mmx1200mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

16

Heritage signage shall be etched on to Dulmera stone plaque of size 18m x 14m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 4

17

Signage shall be etched on to Dulmera stone plaque of size 18m x 10m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 12

18

Providing and fixing MS steel sheets 3 mm thickness on to MS anfgles flats tees and hollow sections with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Kg 10640

19

Providing and fixing MS perforated sheets 3 mm thickness with diamondround shaped perforations as per sample approved by the consultant with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Sqm 90

20

Painting of shop signages with lettering in hindienglish and ornamental design patterns in ready mix paint of approved brand and manfacture in all shades to give an even shade as per drawings and details provided by the consultant

Sqm 560

21

Flush pointing over joints of dressed stone cladding chajjas jali etc with neat cement sand amp colour including racking the joints as per Jodhpur practice including all leads and lifts with grinded mortar of lime putty and stone powder mixed in 11 ratio and gur methi gugal etc are to be mixed as per old traditional practice

Sqm 75

22

Khamira Colour Washing as per old traditional practice to prepare the Khamira the lime should be slaked at least for 7-10 days and regularly it should be stirred by adding cured Gugal for non-synthetic colour adding gum (babool gum) as per specificationThen applying prepared solution on walls three to four thin coats as desired finishing

Sqm 1750

31

23

Providing amp applying Lime kara 12 (1lime cream 2 Zikki powder) grinding mortar with grinding millmanually on lime baseon all flat surface in two coatsFirst coat applying 3mm to 4mm thick and curing properly at least 7 dayssecond finishing coat done after 7days of previous coat as per traditional practice(thickness not more than 6 mm)

Sqm 155

TOTAL OF NON SOR WORKS

14

SCHEDULE-II WORKS OF SIMILAR MAGNITUDE TO THE WORK UNDER CONSIDERATION COMPLETED BY THE

APPLICANT IN LAST FIVE YEARS IN INDIA

(Pursuant to Clause 26)

SNo Na

me

of

wor

k

Place

amp

State

Tender

awardi

ng

Agency

Tender

ed Cost

Stipulate

d time of

Completi

on

Time in

which

complete

d

Date

of

comp

letion

Reason

for

Delay

Principal

features

of work

done

Value of

work done

1 2 3 4 5 6 7 8 9 10 11

Year

Year

Year

Signature of Contractor

15

SCHEDULE-III WORKS TENDERED FOR amp WORKS TO BE COMPLETED AS ON THE DATE OF SUBMISSION OF

APPLICATION IN INDIA

(pursuant Clause 26)

SNo Name

of

work

Place

amp

State

Work on Hand Work tendered for

Tender

Cost amp

Date

or

award

Stipulated

period of

Completion

Cost of

work

remaining

to be

executed

Antici

pated

Date

of

compl

eted

Estimate

d cost

(Rs In

Lakh)

Date

when

decisio

n

expecte

d

Stipulate

d Date

period of

Completi

on

Remar

ks

1 2 3 4 5 6 7 8 9 10 11

Year

Year

Year

Signature of Contractor

16

SCHEDULE- IV

Details of Key Personnel intended to be employed for this work

(use separate sheet if necessary)

(Pursuant to clause 26)

S No Name of Person Qualification Designation Experience Work to be

put on

A Technical Personnel

(1)

(2)

(3)

(4)

B Administrative Personnel

(1)

(2)

(3)

(4)

C Master Craftsmen

(1)

(2)

(3)

(4)

D Craftsmen

(1)

(2)

(3)

(4)

E Any other (1)

(2)

(3)

(4)

Signature of Contractor

17

SCHEDULE- V

DETAILS OF MAJOR ITEMS OF CONSTRUCTION PLANT AVAILABLE FOR THIS WORK

S No

Particulars Make Year of manufacture

Nos Whether owned or confirmed lease

1 Lime mortar Mill

2 Scaffolding Material

3 Movable Gantry

Crane etc

4 Any other TampP for

the purpose

5

6

7

8

Signature of Contractor

18

RAJASTHAN TOURISM DEVELOPMENT CORPORATION LIMITED JAIPUR

(WORKS DIVISION)

TENDER DOCUMENT (Financial Bid)

E-Tender (NIT No) 082016-17

Name of work- Pushkar Market Street- Restoration And Development Works

Restoration Conservation work Stained GssMirror

Signature of Contractor

19

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works

(Based on PWD BSR CIVILElectrical Ajmer Circle - 2013 and item rates)

SCHEDULE -G

GENERAL ABSTRACT

SNO WORK AMOUNT

1

PART A- CIVIL WORKS BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

304610000

2

PART B- SANITARY WORKS BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

5936400

3

PART C- HORTICULTURE BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

2627500

4

PART D-NON BSR ITEMS ( CIVIL AND ELECTRICAL)

GRAND TOTAL

I we hereby agree to execute the work PART A In figures Above Below In words

Above below PART B In figures Above Below In words

Above below PART C In figures Above Below In words

Above below PART D In figures Above Below In words

Above below

General Manager Works

RTDC Ltd Jaipur

Signature of the Contractor With Full Postal Address

20

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works

(Based on PWD BSR Civil Ajmer Circle - 2013)

PART A- CIVIL WORKS

SL No Specification Unit Rate QTY Amount

1

Surface Dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr and lift up to 15 Mtr All kinds of soil 100Sqm 437

26

11362

2

Surface Dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr and lift up to 15 Mtr All kinds of soil Cum 127

30

3810

3

Filling available excavated earth (excluding rock) in trenches plinth side of foundation etc in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift Cum 61

12 732

4

Providing and laying in position cement concrete including curing compaction etc complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level

M15 grade Nominal Mix (with graded stone aggregate 20mm nominal size) Cum

3438

230

790740

5

Random Rubble stone masonry for foundation and plinth in Cement Sand mortar above 30 CM thick wall in

21

Cement Mortar 13 ( 1-Cement 3-Sand) Cum

2193

35

76755

6

Random Rubble stone masonry for superstructure above plinth level one storey height above 30cm thick walls in

Cement Mortar 13 ( 1-Cement 3-Sand) Cum

2686

135

362610

7

Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor three level including curing compaction finishing with rendering in cement sand mortar 13 (1 cement 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement for -

Beams suspended floors roofs griders having slopes up to 15ordm landings balconies shelves chajjas lintels bands plain windows sills staircases and spiral staircases etc

M20 grade Nominal Mix

Cum 5138

45

231210

8

Centering amp shuttering with plywood or steel sheets including strutting propping bracing both ways with wooden members and removal of formwork for upto floor three level for

Suspended floors roofs landings staircases balconies girders cantilevers bands coping bed plates anchor blocks sills chhajjas lintel beam etc Sqm 222

60

13320

9

Providing and fabricating reinforcement using steel of SAILVIZAK-RINLTATA TISCONESSARZINDAL VIJAINAGAR IS 1786-1986 for RCC work including straightening cutting bending placing in position and binding (including cost of binding wire) all complete up to floor three level

22

Thermo-Mechanically Treated bars (Conforming of relevent IS code) Kg 78

2630

205140

10

Plaster on new surface on wall in cement sand mortar 13 including racking of joints etc complete fine finish

20mm thick Sqm 161

150

24150

11

6mm thick cement plaster to ceiling of mix 13 (1cement 3 fine sand) Sqm 105

25

2625

12

Polished Blue Kota Stone flooring skirting laid over 20mm thick base of CM 14 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete

13

For area of each slab from 2001 to 5000 SqCm

30mm thick slab

Sqm 988

35

34580

14

Wall Painting with plastic emulsion paint of approved brand and manufacture to give an even shade

Two or more coats on new work including preparation of base with primer putty lippy complete in all respect Sqm 82

76

6232

15

Applying Exterior Emulsion Paint like ACE APEX or equivalent brand and manufacture of required shade to give an even shade including all scaffolding on prepared surface (excluding water primer)

New Work (Two or more coats) Sqm 119

28

3332

16

Applying one coat of Asian Paints DECO Primer (Water thinnable) of approved brand amp manufacture ic scrapping by sand papering and preparing the even surface on wallwall putty as base for ACE APEX or APEX ULTIMA ic all scaffolding(New Surface) Sqm 24

104

2496

23

17

providing and fixing steel gategrating and grills made of anglesteessqure bars flats or blackpipe with holdfast and fitting complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide kg 83

1250

103750

Demolishing cement concrete including disposal of material with in 50 meter lead

136 or richer mix Cum 319

30

9570

148 or leaner mix Cum 311

20

6220

18

Demolishing RCC work manually by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge

Cum 1085

30

32550

19

Rough chisel dressed stone flooring over 20mm (Av) thick base in CM 16 including pointing with cement mortar 12 (1 cement 2 stone dust) with and admixture of pigment to match the shade of stone with joint thickness upto 15mm

45mm thick red sand stone

Sqm 385

230

88550

20

Providing and fixing 1st quality standard white grey ivory fume red brown light green light blue and other light shades glazed tiles confirming to IS 13753 amp IS 15622 of size 300mm x 200mm in walls floors steps pillars etc laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar)

Catogary-A Kajaria Johnson Somani Orient make Sqm 763

25

19075

24

21

Applying one coat industrial grade bitumen of penetration 2585 of approved quality using 170 kg per Sqm on Damp Proof Coarse after cleaning the surface with brushes and finally with a piece of cloth slightly soaked in kerosene oil Sqm 103

45

4635

22

Providing and Fixing 30 too 40 mm thickk stone chajjas in cement sand mortar 14 including making gola at junction with wall concrete M-15 grade (124 nominal mix drip course

20 mm thick plastering in CM 16 on both Sqm 645

35

22575

23

Providing and fixing steel gate grating and grills made of angles tees square bars flatsor black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide

Kg 83

9750

809250

24

Extra if squarerectangular hollow tubelar sections are used or grill made by flats only

Kg

10

6490

64251

P amp F bolts including nuts and bolts complete

Kg 57

240

13680

25

Painting with ready mix paint of approved brand and manufacture in all shades to give an even shade

New Steel Work Sqm 40

1500

60000

Welding by electric plant cmlength 286

15000

42900

TOTAL OF BSR WORKS CIVIL

3046100

25

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - B- SANITARY WORKS

SL No Specification Unit Rate QTY Amount

1

P amp F GI Pipes (External Work) with GI Fittings excluding union (IS 1239 Mark) including trenching amp refilling earth etc

40mm dia nominal bore A Class

Mtr 338

32 10816

25mm dia nominal bore A Class

Mtr 182

48 8736

2

Making connection of GI distribution Branch with GI main including all Fitting

Beyond 25mm amp upto 100mm dia Each 332 8 2656

3

P amp F Sand ndashcast Floor Trap (Nahni) of (IS1729 mark) of approved qualitymake with socket down or hinged grating including cutting and making good the floor- 100 x 100mm Each

421

4 1684

4

P amp F Gun-metal Full-way Valve (IS778 Mark) or wheel valve of approved make

Gun metal 25mm nominal bore Each 702 4 2808

Gun metal 40mm nominal bore Each 1065 4 4260

5

P amp F PVC Storage Tank ISI Marked (IS 12701) indicating the BIS license No) of approved make with cover 25mm dia 1M long GI over-flow pipe amp 25 Cm long wash out pipe with plug amp socket including making connection etc complete of approved design

1000 litres capacity Each 5437 4 21748

6

P amp F push cock superior quality of approved make

CP brass 15 mm

Each 416

16 6656

TOTAL 5936400

26

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - C-HOTICULTURE WORKS

SL No Specification Unit Rate QTY Amount

1

Supply of dry manure including loading unloading transportation amp stacking at site

Goat dungmanure

Cum

50000

35

17500

2

Supply amp Stacking good earth at site complete including loading unloading amp transportation etc Cum

7500

55

4125

3

Supply of different varities of treeshrubsclimbers according to height and age of the plant at site including loadingunloading amp transportation etc complete

Different flowing plants 900mm to 1500mm Each

1500

115

1725

4

Supply of different varities of bougainvillea in poly bagsearthen pots according to height growth amp age of plant at site including loadingunloading amp transportation etc complete

Local variety of bougainvillea 600 mm to 900mm Each

1500

75

1125

5

Digging pits in ordinary soil amp refilling the same with the excavated earth mixed with manure in the ratio 21 by volume (2 parts of stacked volume of earth after reduction by 20 1 parts of stacked volume of manure after reduction by 8) flooding with water and dressing including removal of surplus earth Each

1000

150

1500

27

(Cost of manure or extra good earth if needed to be paid separately) pit dia 60 cm X 60 cm deep

6

Spreading of manure and good earth in required thickness (cost of manure and good earth to be paid separately) Cum

400

75

300

TOTAL OF HORTICULTURE WORKS

26275

28

SCHEDULE OF QUANTITIES

Name of work Pushkar Market Street- Restoration And Development Works

(Based on item rates)

PART - D- NON SOR WORKS

SL No

Specification Unit Rate to

be Quoted

QTY

Amount

1

Providing and fixing fine dressed sand stoneapproved stone JALIas per existing matching geometrical design including moulding work with fine finishing fixing with thambli by proper adhesive and white cement with pigment including making groove etc complete in all respect

(b) 50mm thick Sqm 45

2

Providing amp fixing ashlar Rain water Spouts (3) lines dressed as per traditional practice existing design approved design size 60 x 30 x 25 cm fixing the rain water spout with lime surkhi mortar 12 with proper slope complete in all respect Each

12

3

Providing amp fixing ornamental stone cladding of approved sand stone with dressing complete as per existing designpatternapproved designfixing with 30mm thickgrinded lime surkhi mortar 12 amp pointing with white cement with araldite and pigment to match shade the stone complete in all respect as per direction of Engineer incharge(75mm thick) Sqm

54

4

Providing and fixing fine dressed sand stone Dasacoping as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect

(c) 75mm to 100mm thick with pan patti design Sqm 320

5

Providing and fixing fine dressed sand stone Cladding (Plain dressing only) as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect including removal of damaged cladding

(a) 50mm to 60mm thick Sqm 180

6

Supply and istallation whiteredapproved shade sandstone dustbin of size 800 mm x 450 mm and height 850 mm with hollow center to hang MS Dustbin of size 400mmx 500mmx 600 mm made of 1mm thick metal sheet fixed to stone pillars with MS chain edged with 50x50x5 mm angle sections including cutting welding and fabrication with priming coat of red oxide and approved ready mix paint of approved shadeStone peices joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 26

29

7

Supply and istallation of RedWhiteapproved shade stone bench of size 1500mmx450mmx450 mm horizontal stone members of size 300mmx400mmx450mm on two sides supporting the horizontal seating stone of 150 mm thickness fixed to vertical stone members joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 35

8

Poviding fixing testing and commisioning of Stainless Steel body bull Storage Capacity in (litres) 150 bull Nominal Cooling Capacity (Litreshr) 150 bull No Of Faucets 2 bull Dimensions 820W x 700D x 1235 H bull Normal Demand (glasses hr) 750 bull Refrigerant R-22 bull Current (Amps) 749 bull Water Overflow (Connections) 12 BSP bull Type Of Compressor Rotary Model No- SDLX15150A make Blue star or similar in make of VoltasOasis

Each 4

9

Providing fixing testing and commissioning of water purification system having auto shut-off e-boiling Voltage Stabilizer bull Type of Treatment- sediment filter active carbon cartridge mineral guard UV chamber bull water flow rate 3ltrminbull ultra- violet lamp of 16 watts bull power rating of 35watt bull Dimensions 355H x 1025D x 307WModel ndash Hi fio Make Eureka Forbes- aquagard or similar in make of livpurekent

Each 4

10

Demolishion of the existing bituminous road surface to a depth of 150 mm and disposal of demolished material with a lift upto 3 m and lead upto 1000 m

Sqm 50

11

Providing and fixing fine dressed sand stone flooring with white sand stone (Bansh paharpurdholpur stone) (panji marked surface) machine cut of approved shade set in pattern over 30mm thick base in cement mortar 16 including pointing with cement mortar 12 (1 cement2 stone dust) mixed with pigment to match the shade of stone with joint thickness upto 5 mm as per existing flloringsample approved by the consultantapproved by (75mm thick)

Sqm 730

12

Providing and Fixing Cobbles stone of lime sand stone size 100X100MM and theakness of 70 to100mm on path way open court yards of color shade approved by the consultant over cement mortar 13 ( 1 cement3 course sand) keeping 10mm joint between cobbles filled with cement mortar 13 ( 1 cement3 course sand) the mortar should remain recessed by 5mm from the top surface of the cobble stone complete in all respects as per design and details provided by the consultant

Sqm 1650

13

Supply and installation of sanstone signage 450x200 mm of redwhiteapproved shade Sandstone 75 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete with fixing with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 6

30

14

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 450mmx2400mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved with ornamentation in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

15

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 650mmx1200mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

16

Heritage signage shall be etched on to Dulmera stone plaque of size 18m x 14m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 4

17

Signage shall be etched on to Dulmera stone plaque of size 18m x 10m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 12

18

Providing and fixing MS steel sheets 3 mm thickness on to MS anfgles flats tees and hollow sections with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Kg 10640

19

Providing and fixing MS perforated sheets 3 mm thickness with diamondround shaped perforations as per sample approved by the consultant with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Sqm 90

20

Painting of shop signages with lettering in hindienglish and ornamental design patterns in ready mix paint of approved brand and manfacture in all shades to give an even shade as per drawings and details provided by the consultant

Sqm 560

21

Flush pointing over joints of dressed stone cladding chajjas jali etc with neat cement sand amp colour including racking the joints as per Jodhpur practice including all leads and lifts with grinded mortar of lime putty and stone powder mixed in 11 ratio and gur methi gugal etc are to be mixed as per old traditional practice

Sqm 75

22

Khamira Colour Washing as per old traditional practice to prepare the Khamira the lime should be slaked at least for 7-10 days and regularly it should be stirred by adding cured Gugal for non-synthetic colour adding gum (babool gum) as per specificationThen applying prepared solution on walls three to four thin coats as desired finishing

Sqm 1750

31

23

Providing amp applying Lime kara 12 (1lime cream 2 Zikki powder) grinding mortar with grinding millmanually on lime baseon all flat surface in two coatsFirst coat applying 3mm to 4mm thick and curing properly at least 7 dayssecond finishing coat done after 7days of previous coat as per traditional practice(thickness not more than 6 mm)

Sqm 155

TOTAL OF NON SOR WORKS

15

SCHEDULE-III WORKS TENDERED FOR amp WORKS TO BE COMPLETED AS ON THE DATE OF SUBMISSION OF

APPLICATION IN INDIA

(pursuant Clause 26)

SNo Name

of

work

Place

amp

State

Work on Hand Work tendered for

Tender

Cost amp

Date

or

award

Stipulated

period of

Completion

Cost of

work

remaining

to be

executed

Antici

pated

Date

of

compl

eted

Estimate

d cost

(Rs In

Lakh)

Date

when

decisio

n

expecte

d

Stipulate

d Date

period of

Completi

on

Remar

ks

1 2 3 4 5 6 7 8 9 10 11

Year

Year

Year

Signature of Contractor

16

SCHEDULE- IV

Details of Key Personnel intended to be employed for this work

(use separate sheet if necessary)

(Pursuant to clause 26)

S No Name of Person Qualification Designation Experience Work to be

put on

A Technical Personnel

(1)

(2)

(3)

(4)

B Administrative Personnel

(1)

(2)

(3)

(4)

C Master Craftsmen

(1)

(2)

(3)

(4)

D Craftsmen

(1)

(2)

(3)

(4)

E Any other (1)

(2)

(3)

(4)

Signature of Contractor

17

SCHEDULE- V

DETAILS OF MAJOR ITEMS OF CONSTRUCTION PLANT AVAILABLE FOR THIS WORK

S No

Particulars Make Year of manufacture

Nos Whether owned or confirmed lease

1 Lime mortar Mill

2 Scaffolding Material

3 Movable Gantry

Crane etc

4 Any other TampP for

the purpose

5

6

7

8

Signature of Contractor

18

RAJASTHAN TOURISM DEVELOPMENT CORPORATION LIMITED JAIPUR

(WORKS DIVISION)

TENDER DOCUMENT (Financial Bid)

E-Tender (NIT No) 082016-17

Name of work- Pushkar Market Street- Restoration And Development Works

Restoration Conservation work Stained GssMirror

Signature of Contractor

19

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works

(Based on PWD BSR CIVILElectrical Ajmer Circle - 2013 and item rates)

SCHEDULE -G

GENERAL ABSTRACT

SNO WORK AMOUNT

1

PART A- CIVIL WORKS BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

304610000

2

PART B- SANITARY WORKS BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

5936400

3

PART C- HORTICULTURE BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

2627500

4

PART D-NON BSR ITEMS ( CIVIL AND ELECTRICAL)

GRAND TOTAL

I we hereby agree to execute the work PART A In figures Above Below In words

Above below PART B In figures Above Below In words

Above below PART C In figures Above Below In words

Above below PART D In figures Above Below In words

Above below

General Manager Works

RTDC Ltd Jaipur

Signature of the Contractor With Full Postal Address

20

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works

(Based on PWD BSR Civil Ajmer Circle - 2013)

PART A- CIVIL WORKS

SL No Specification Unit Rate QTY Amount

1

Surface Dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr and lift up to 15 Mtr All kinds of soil 100Sqm 437

26

11362

2

Surface Dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr and lift up to 15 Mtr All kinds of soil Cum 127

30

3810

3

Filling available excavated earth (excluding rock) in trenches plinth side of foundation etc in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift Cum 61

12 732

4

Providing and laying in position cement concrete including curing compaction etc complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level

M15 grade Nominal Mix (with graded stone aggregate 20mm nominal size) Cum

3438

230

790740

5

Random Rubble stone masonry for foundation and plinth in Cement Sand mortar above 30 CM thick wall in

21

Cement Mortar 13 ( 1-Cement 3-Sand) Cum

2193

35

76755

6

Random Rubble stone masonry for superstructure above plinth level one storey height above 30cm thick walls in

Cement Mortar 13 ( 1-Cement 3-Sand) Cum

2686

135

362610

7

Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor three level including curing compaction finishing with rendering in cement sand mortar 13 (1 cement 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement for -

Beams suspended floors roofs griders having slopes up to 15ordm landings balconies shelves chajjas lintels bands plain windows sills staircases and spiral staircases etc

M20 grade Nominal Mix

Cum 5138

45

231210

8

Centering amp shuttering with plywood or steel sheets including strutting propping bracing both ways with wooden members and removal of formwork for upto floor three level for

Suspended floors roofs landings staircases balconies girders cantilevers bands coping bed plates anchor blocks sills chhajjas lintel beam etc Sqm 222

60

13320

9

Providing and fabricating reinforcement using steel of SAILVIZAK-RINLTATA TISCONESSARZINDAL VIJAINAGAR IS 1786-1986 for RCC work including straightening cutting bending placing in position and binding (including cost of binding wire) all complete up to floor three level

22

Thermo-Mechanically Treated bars (Conforming of relevent IS code) Kg 78

2630

205140

10

Plaster on new surface on wall in cement sand mortar 13 including racking of joints etc complete fine finish

20mm thick Sqm 161

150

24150

11

6mm thick cement plaster to ceiling of mix 13 (1cement 3 fine sand) Sqm 105

25

2625

12

Polished Blue Kota Stone flooring skirting laid over 20mm thick base of CM 14 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete

13

For area of each slab from 2001 to 5000 SqCm

30mm thick slab

Sqm 988

35

34580

14

Wall Painting with plastic emulsion paint of approved brand and manufacture to give an even shade

Two or more coats on new work including preparation of base with primer putty lippy complete in all respect Sqm 82

76

6232

15

Applying Exterior Emulsion Paint like ACE APEX or equivalent brand and manufacture of required shade to give an even shade including all scaffolding on prepared surface (excluding water primer)

New Work (Two or more coats) Sqm 119

28

3332

16

Applying one coat of Asian Paints DECO Primer (Water thinnable) of approved brand amp manufacture ic scrapping by sand papering and preparing the even surface on wallwall putty as base for ACE APEX or APEX ULTIMA ic all scaffolding(New Surface) Sqm 24

104

2496

23

17

providing and fixing steel gategrating and grills made of anglesteessqure bars flats or blackpipe with holdfast and fitting complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide kg 83

1250

103750

Demolishing cement concrete including disposal of material with in 50 meter lead

136 or richer mix Cum 319

30

9570

148 or leaner mix Cum 311

20

6220

18

Demolishing RCC work manually by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge

Cum 1085

30

32550

19

Rough chisel dressed stone flooring over 20mm (Av) thick base in CM 16 including pointing with cement mortar 12 (1 cement 2 stone dust) with and admixture of pigment to match the shade of stone with joint thickness upto 15mm

45mm thick red sand stone

Sqm 385

230

88550

20

Providing and fixing 1st quality standard white grey ivory fume red brown light green light blue and other light shades glazed tiles confirming to IS 13753 amp IS 15622 of size 300mm x 200mm in walls floors steps pillars etc laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar)

Catogary-A Kajaria Johnson Somani Orient make Sqm 763

25

19075

24

21

Applying one coat industrial grade bitumen of penetration 2585 of approved quality using 170 kg per Sqm on Damp Proof Coarse after cleaning the surface with brushes and finally with a piece of cloth slightly soaked in kerosene oil Sqm 103

45

4635

22

Providing and Fixing 30 too 40 mm thickk stone chajjas in cement sand mortar 14 including making gola at junction with wall concrete M-15 grade (124 nominal mix drip course

20 mm thick plastering in CM 16 on both Sqm 645

35

22575

23

Providing and fixing steel gate grating and grills made of angles tees square bars flatsor black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide

Kg 83

9750

809250

24

Extra if squarerectangular hollow tubelar sections are used or grill made by flats only

Kg

10

6490

64251

P amp F bolts including nuts and bolts complete

Kg 57

240

13680

25

Painting with ready mix paint of approved brand and manufacture in all shades to give an even shade

New Steel Work Sqm 40

1500

60000

Welding by electric plant cmlength 286

15000

42900

TOTAL OF BSR WORKS CIVIL

3046100

25

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - B- SANITARY WORKS

SL No Specification Unit Rate QTY Amount

1

P amp F GI Pipes (External Work) with GI Fittings excluding union (IS 1239 Mark) including trenching amp refilling earth etc

40mm dia nominal bore A Class

Mtr 338

32 10816

25mm dia nominal bore A Class

Mtr 182

48 8736

2

Making connection of GI distribution Branch with GI main including all Fitting

Beyond 25mm amp upto 100mm dia Each 332 8 2656

3

P amp F Sand ndashcast Floor Trap (Nahni) of (IS1729 mark) of approved qualitymake with socket down or hinged grating including cutting and making good the floor- 100 x 100mm Each

421

4 1684

4

P amp F Gun-metal Full-way Valve (IS778 Mark) or wheel valve of approved make

Gun metal 25mm nominal bore Each 702 4 2808

Gun metal 40mm nominal bore Each 1065 4 4260

5

P amp F PVC Storage Tank ISI Marked (IS 12701) indicating the BIS license No) of approved make with cover 25mm dia 1M long GI over-flow pipe amp 25 Cm long wash out pipe with plug amp socket including making connection etc complete of approved design

1000 litres capacity Each 5437 4 21748

6

P amp F push cock superior quality of approved make

CP brass 15 mm

Each 416

16 6656

TOTAL 5936400

26

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - C-HOTICULTURE WORKS

SL No Specification Unit Rate QTY Amount

1

Supply of dry manure including loading unloading transportation amp stacking at site

Goat dungmanure

Cum

50000

35

17500

2

Supply amp Stacking good earth at site complete including loading unloading amp transportation etc Cum

7500

55

4125

3

Supply of different varities of treeshrubsclimbers according to height and age of the plant at site including loadingunloading amp transportation etc complete

Different flowing plants 900mm to 1500mm Each

1500

115

1725

4

Supply of different varities of bougainvillea in poly bagsearthen pots according to height growth amp age of plant at site including loadingunloading amp transportation etc complete

Local variety of bougainvillea 600 mm to 900mm Each

1500

75

1125

5

Digging pits in ordinary soil amp refilling the same with the excavated earth mixed with manure in the ratio 21 by volume (2 parts of stacked volume of earth after reduction by 20 1 parts of stacked volume of manure after reduction by 8) flooding with water and dressing including removal of surplus earth Each

1000

150

1500

27

(Cost of manure or extra good earth if needed to be paid separately) pit dia 60 cm X 60 cm deep

6

Spreading of manure and good earth in required thickness (cost of manure and good earth to be paid separately) Cum

400

75

300

TOTAL OF HORTICULTURE WORKS

26275

28

SCHEDULE OF QUANTITIES

Name of work Pushkar Market Street- Restoration And Development Works

(Based on item rates)

PART - D- NON SOR WORKS

SL No

Specification Unit Rate to

be Quoted

QTY

Amount

1

Providing and fixing fine dressed sand stoneapproved stone JALIas per existing matching geometrical design including moulding work with fine finishing fixing with thambli by proper adhesive and white cement with pigment including making groove etc complete in all respect

(b) 50mm thick Sqm 45

2

Providing amp fixing ashlar Rain water Spouts (3) lines dressed as per traditional practice existing design approved design size 60 x 30 x 25 cm fixing the rain water spout with lime surkhi mortar 12 with proper slope complete in all respect Each

12

3

Providing amp fixing ornamental stone cladding of approved sand stone with dressing complete as per existing designpatternapproved designfixing with 30mm thickgrinded lime surkhi mortar 12 amp pointing with white cement with araldite and pigment to match shade the stone complete in all respect as per direction of Engineer incharge(75mm thick) Sqm

54

4

Providing and fixing fine dressed sand stone Dasacoping as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect

(c) 75mm to 100mm thick with pan patti design Sqm 320

5

Providing and fixing fine dressed sand stone Cladding (Plain dressing only) as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect including removal of damaged cladding

(a) 50mm to 60mm thick Sqm 180

6

Supply and istallation whiteredapproved shade sandstone dustbin of size 800 mm x 450 mm and height 850 mm with hollow center to hang MS Dustbin of size 400mmx 500mmx 600 mm made of 1mm thick metal sheet fixed to stone pillars with MS chain edged with 50x50x5 mm angle sections including cutting welding and fabrication with priming coat of red oxide and approved ready mix paint of approved shadeStone peices joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 26

29

7

Supply and istallation of RedWhiteapproved shade stone bench of size 1500mmx450mmx450 mm horizontal stone members of size 300mmx400mmx450mm on two sides supporting the horizontal seating stone of 150 mm thickness fixed to vertical stone members joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 35

8

Poviding fixing testing and commisioning of Stainless Steel body bull Storage Capacity in (litres) 150 bull Nominal Cooling Capacity (Litreshr) 150 bull No Of Faucets 2 bull Dimensions 820W x 700D x 1235 H bull Normal Demand (glasses hr) 750 bull Refrigerant R-22 bull Current (Amps) 749 bull Water Overflow (Connections) 12 BSP bull Type Of Compressor Rotary Model No- SDLX15150A make Blue star or similar in make of VoltasOasis

Each 4

9

Providing fixing testing and commissioning of water purification system having auto shut-off e-boiling Voltage Stabilizer bull Type of Treatment- sediment filter active carbon cartridge mineral guard UV chamber bull water flow rate 3ltrminbull ultra- violet lamp of 16 watts bull power rating of 35watt bull Dimensions 355H x 1025D x 307WModel ndash Hi fio Make Eureka Forbes- aquagard or similar in make of livpurekent

Each 4

10

Demolishion of the existing bituminous road surface to a depth of 150 mm and disposal of demolished material with a lift upto 3 m and lead upto 1000 m

Sqm 50

11

Providing and fixing fine dressed sand stone flooring with white sand stone (Bansh paharpurdholpur stone) (panji marked surface) machine cut of approved shade set in pattern over 30mm thick base in cement mortar 16 including pointing with cement mortar 12 (1 cement2 stone dust) mixed with pigment to match the shade of stone with joint thickness upto 5 mm as per existing flloringsample approved by the consultantapproved by (75mm thick)

Sqm 730

12

Providing and Fixing Cobbles stone of lime sand stone size 100X100MM and theakness of 70 to100mm on path way open court yards of color shade approved by the consultant over cement mortar 13 ( 1 cement3 course sand) keeping 10mm joint between cobbles filled with cement mortar 13 ( 1 cement3 course sand) the mortar should remain recessed by 5mm from the top surface of the cobble stone complete in all respects as per design and details provided by the consultant

Sqm 1650

13

Supply and installation of sanstone signage 450x200 mm of redwhiteapproved shade Sandstone 75 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete with fixing with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 6

30

14

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 450mmx2400mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved with ornamentation in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

15

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 650mmx1200mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

16

Heritage signage shall be etched on to Dulmera stone plaque of size 18m x 14m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 4

17

Signage shall be etched on to Dulmera stone plaque of size 18m x 10m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 12

18

Providing and fixing MS steel sheets 3 mm thickness on to MS anfgles flats tees and hollow sections with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Kg 10640

19

Providing and fixing MS perforated sheets 3 mm thickness with diamondround shaped perforations as per sample approved by the consultant with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Sqm 90

20

Painting of shop signages with lettering in hindienglish and ornamental design patterns in ready mix paint of approved brand and manfacture in all shades to give an even shade as per drawings and details provided by the consultant

Sqm 560

21

Flush pointing over joints of dressed stone cladding chajjas jali etc with neat cement sand amp colour including racking the joints as per Jodhpur practice including all leads and lifts with grinded mortar of lime putty and stone powder mixed in 11 ratio and gur methi gugal etc are to be mixed as per old traditional practice

Sqm 75

22

Khamira Colour Washing as per old traditional practice to prepare the Khamira the lime should be slaked at least for 7-10 days and regularly it should be stirred by adding cured Gugal for non-synthetic colour adding gum (babool gum) as per specificationThen applying prepared solution on walls three to four thin coats as desired finishing

Sqm 1750

31

23

Providing amp applying Lime kara 12 (1lime cream 2 Zikki powder) grinding mortar with grinding millmanually on lime baseon all flat surface in two coatsFirst coat applying 3mm to 4mm thick and curing properly at least 7 dayssecond finishing coat done after 7days of previous coat as per traditional practice(thickness not more than 6 mm)

Sqm 155

TOTAL OF NON SOR WORKS

16

SCHEDULE- IV

Details of Key Personnel intended to be employed for this work

(use separate sheet if necessary)

(Pursuant to clause 26)

S No Name of Person Qualification Designation Experience Work to be

put on

A Technical Personnel

(1)

(2)

(3)

(4)

B Administrative Personnel

(1)

(2)

(3)

(4)

C Master Craftsmen

(1)

(2)

(3)

(4)

D Craftsmen

(1)

(2)

(3)

(4)

E Any other (1)

(2)

(3)

(4)

Signature of Contractor

17

SCHEDULE- V

DETAILS OF MAJOR ITEMS OF CONSTRUCTION PLANT AVAILABLE FOR THIS WORK

S No

Particulars Make Year of manufacture

Nos Whether owned or confirmed lease

1 Lime mortar Mill

2 Scaffolding Material

3 Movable Gantry

Crane etc

4 Any other TampP for

the purpose

5

6

7

8

Signature of Contractor

18

RAJASTHAN TOURISM DEVELOPMENT CORPORATION LIMITED JAIPUR

(WORKS DIVISION)

TENDER DOCUMENT (Financial Bid)

E-Tender (NIT No) 082016-17

Name of work- Pushkar Market Street- Restoration And Development Works

Restoration Conservation work Stained GssMirror

Signature of Contractor

19

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works

(Based on PWD BSR CIVILElectrical Ajmer Circle - 2013 and item rates)

SCHEDULE -G

GENERAL ABSTRACT

SNO WORK AMOUNT

1

PART A- CIVIL WORKS BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

304610000

2

PART B- SANITARY WORKS BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

5936400

3

PART C- HORTICULTURE BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

2627500

4

PART D-NON BSR ITEMS ( CIVIL AND ELECTRICAL)

GRAND TOTAL

I we hereby agree to execute the work PART A In figures Above Below In words

Above below PART B In figures Above Below In words

Above below PART C In figures Above Below In words

Above below PART D In figures Above Below In words

Above below

General Manager Works

RTDC Ltd Jaipur

Signature of the Contractor With Full Postal Address

20

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works

(Based on PWD BSR Civil Ajmer Circle - 2013)

PART A- CIVIL WORKS

SL No Specification Unit Rate QTY Amount

1

Surface Dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr and lift up to 15 Mtr All kinds of soil 100Sqm 437

26

11362

2

Surface Dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr and lift up to 15 Mtr All kinds of soil Cum 127

30

3810

3

Filling available excavated earth (excluding rock) in trenches plinth side of foundation etc in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift Cum 61

12 732

4

Providing and laying in position cement concrete including curing compaction etc complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level

M15 grade Nominal Mix (with graded stone aggregate 20mm nominal size) Cum

3438

230

790740

5

Random Rubble stone masonry for foundation and plinth in Cement Sand mortar above 30 CM thick wall in

21

Cement Mortar 13 ( 1-Cement 3-Sand) Cum

2193

35

76755

6

Random Rubble stone masonry for superstructure above plinth level one storey height above 30cm thick walls in

Cement Mortar 13 ( 1-Cement 3-Sand) Cum

2686

135

362610

7

Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor three level including curing compaction finishing with rendering in cement sand mortar 13 (1 cement 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement for -

Beams suspended floors roofs griders having slopes up to 15ordm landings balconies shelves chajjas lintels bands plain windows sills staircases and spiral staircases etc

M20 grade Nominal Mix

Cum 5138

45

231210

8

Centering amp shuttering with plywood or steel sheets including strutting propping bracing both ways with wooden members and removal of formwork for upto floor three level for

Suspended floors roofs landings staircases balconies girders cantilevers bands coping bed plates anchor blocks sills chhajjas lintel beam etc Sqm 222

60

13320

9

Providing and fabricating reinforcement using steel of SAILVIZAK-RINLTATA TISCONESSARZINDAL VIJAINAGAR IS 1786-1986 for RCC work including straightening cutting bending placing in position and binding (including cost of binding wire) all complete up to floor three level

22

Thermo-Mechanically Treated bars (Conforming of relevent IS code) Kg 78

2630

205140

10

Plaster on new surface on wall in cement sand mortar 13 including racking of joints etc complete fine finish

20mm thick Sqm 161

150

24150

11

6mm thick cement plaster to ceiling of mix 13 (1cement 3 fine sand) Sqm 105

25

2625

12

Polished Blue Kota Stone flooring skirting laid over 20mm thick base of CM 14 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete

13

For area of each slab from 2001 to 5000 SqCm

30mm thick slab

Sqm 988

35

34580

14

Wall Painting with plastic emulsion paint of approved brand and manufacture to give an even shade

Two or more coats on new work including preparation of base with primer putty lippy complete in all respect Sqm 82

76

6232

15

Applying Exterior Emulsion Paint like ACE APEX or equivalent brand and manufacture of required shade to give an even shade including all scaffolding on prepared surface (excluding water primer)

New Work (Two or more coats) Sqm 119

28

3332

16

Applying one coat of Asian Paints DECO Primer (Water thinnable) of approved brand amp manufacture ic scrapping by sand papering and preparing the even surface on wallwall putty as base for ACE APEX or APEX ULTIMA ic all scaffolding(New Surface) Sqm 24

104

2496

23

17

providing and fixing steel gategrating and grills made of anglesteessqure bars flats or blackpipe with holdfast and fitting complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide kg 83

1250

103750

Demolishing cement concrete including disposal of material with in 50 meter lead

136 or richer mix Cum 319

30

9570

148 or leaner mix Cum 311

20

6220

18

Demolishing RCC work manually by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge

Cum 1085

30

32550

19

Rough chisel dressed stone flooring over 20mm (Av) thick base in CM 16 including pointing with cement mortar 12 (1 cement 2 stone dust) with and admixture of pigment to match the shade of stone with joint thickness upto 15mm

45mm thick red sand stone

Sqm 385

230

88550

20

Providing and fixing 1st quality standard white grey ivory fume red brown light green light blue and other light shades glazed tiles confirming to IS 13753 amp IS 15622 of size 300mm x 200mm in walls floors steps pillars etc laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar)

Catogary-A Kajaria Johnson Somani Orient make Sqm 763

25

19075

24

21

Applying one coat industrial grade bitumen of penetration 2585 of approved quality using 170 kg per Sqm on Damp Proof Coarse after cleaning the surface with brushes and finally with a piece of cloth slightly soaked in kerosene oil Sqm 103

45

4635

22

Providing and Fixing 30 too 40 mm thickk stone chajjas in cement sand mortar 14 including making gola at junction with wall concrete M-15 grade (124 nominal mix drip course

20 mm thick plastering in CM 16 on both Sqm 645

35

22575

23

Providing and fixing steel gate grating and grills made of angles tees square bars flatsor black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide

Kg 83

9750

809250

24

Extra if squarerectangular hollow tubelar sections are used or grill made by flats only

Kg

10

6490

64251

P amp F bolts including nuts and bolts complete

Kg 57

240

13680

25

Painting with ready mix paint of approved brand and manufacture in all shades to give an even shade

New Steel Work Sqm 40

1500

60000

Welding by electric plant cmlength 286

15000

42900

TOTAL OF BSR WORKS CIVIL

3046100

25

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - B- SANITARY WORKS

SL No Specification Unit Rate QTY Amount

1

P amp F GI Pipes (External Work) with GI Fittings excluding union (IS 1239 Mark) including trenching amp refilling earth etc

40mm dia nominal bore A Class

Mtr 338

32 10816

25mm dia nominal bore A Class

Mtr 182

48 8736

2

Making connection of GI distribution Branch with GI main including all Fitting

Beyond 25mm amp upto 100mm dia Each 332 8 2656

3

P amp F Sand ndashcast Floor Trap (Nahni) of (IS1729 mark) of approved qualitymake with socket down or hinged grating including cutting and making good the floor- 100 x 100mm Each

421

4 1684

4

P amp F Gun-metal Full-way Valve (IS778 Mark) or wheel valve of approved make

Gun metal 25mm nominal bore Each 702 4 2808

Gun metal 40mm nominal bore Each 1065 4 4260

5

P amp F PVC Storage Tank ISI Marked (IS 12701) indicating the BIS license No) of approved make with cover 25mm dia 1M long GI over-flow pipe amp 25 Cm long wash out pipe with plug amp socket including making connection etc complete of approved design

1000 litres capacity Each 5437 4 21748

6

P amp F push cock superior quality of approved make

CP brass 15 mm

Each 416

16 6656

TOTAL 5936400

26

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - C-HOTICULTURE WORKS

SL No Specification Unit Rate QTY Amount

1

Supply of dry manure including loading unloading transportation amp stacking at site

Goat dungmanure

Cum

50000

35

17500

2

Supply amp Stacking good earth at site complete including loading unloading amp transportation etc Cum

7500

55

4125

3

Supply of different varities of treeshrubsclimbers according to height and age of the plant at site including loadingunloading amp transportation etc complete

Different flowing plants 900mm to 1500mm Each

1500

115

1725

4

Supply of different varities of bougainvillea in poly bagsearthen pots according to height growth amp age of plant at site including loadingunloading amp transportation etc complete

Local variety of bougainvillea 600 mm to 900mm Each

1500

75

1125

5

Digging pits in ordinary soil amp refilling the same with the excavated earth mixed with manure in the ratio 21 by volume (2 parts of stacked volume of earth after reduction by 20 1 parts of stacked volume of manure after reduction by 8) flooding with water and dressing including removal of surplus earth Each

1000

150

1500

27

(Cost of manure or extra good earth if needed to be paid separately) pit dia 60 cm X 60 cm deep

6

Spreading of manure and good earth in required thickness (cost of manure and good earth to be paid separately) Cum

400

75

300

TOTAL OF HORTICULTURE WORKS

26275

28

SCHEDULE OF QUANTITIES

Name of work Pushkar Market Street- Restoration And Development Works

(Based on item rates)

PART - D- NON SOR WORKS

SL No

Specification Unit Rate to

be Quoted

QTY

Amount

1

Providing and fixing fine dressed sand stoneapproved stone JALIas per existing matching geometrical design including moulding work with fine finishing fixing with thambli by proper adhesive and white cement with pigment including making groove etc complete in all respect

(b) 50mm thick Sqm 45

2

Providing amp fixing ashlar Rain water Spouts (3) lines dressed as per traditional practice existing design approved design size 60 x 30 x 25 cm fixing the rain water spout with lime surkhi mortar 12 with proper slope complete in all respect Each

12

3

Providing amp fixing ornamental stone cladding of approved sand stone with dressing complete as per existing designpatternapproved designfixing with 30mm thickgrinded lime surkhi mortar 12 amp pointing with white cement with araldite and pigment to match shade the stone complete in all respect as per direction of Engineer incharge(75mm thick) Sqm

54

4

Providing and fixing fine dressed sand stone Dasacoping as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect

(c) 75mm to 100mm thick with pan patti design Sqm 320

5

Providing and fixing fine dressed sand stone Cladding (Plain dressing only) as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect including removal of damaged cladding

(a) 50mm to 60mm thick Sqm 180

6

Supply and istallation whiteredapproved shade sandstone dustbin of size 800 mm x 450 mm and height 850 mm with hollow center to hang MS Dustbin of size 400mmx 500mmx 600 mm made of 1mm thick metal sheet fixed to stone pillars with MS chain edged with 50x50x5 mm angle sections including cutting welding and fabrication with priming coat of red oxide and approved ready mix paint of approved shadeStone peices joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 26

29

7

Supply and istallation of RedWhiteapproved shade stone bench of size 1500mmx450mmx450 mm horizontal stone members of size 300mmx400mmx450mm on two sides supporting the horizontal seating stone of 150 mm thickness fixed to vertical stone members joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 35

8

Poviding fixing testing and commisioning of Stainless Steel body bull Storage Capacity in (litres) 150 bull Nominal Cooling Capacity (Litreshr) 150 bull No Of Faucets 2 bull Dimensions 820W x 700D x 1235 H bull Normal Demand (glasses hr) 750 bull Refrigerant R-22 bull Current (Amps) 749 bull Water Overflow (Connections) 12 BSP bull Type Of Compressor Rotary Model No- SDLX15150A make Blue star or similar in make of VoltasOasis

Each 4

9

Providing fixing testing and commissioning of water purification system having auto shut-off e-boiling Voltage Stabilizer bull Type of Treatment- sediment filter active carbon cartridge mineral guard UV chamber bull water flow rate 3ltrminbull ultra- violet lamp of 16 watts bull power rating of 35watt bull Dimensions 355H x 1025D x 307WModel ndash Hi fio Make Eureka Forbes- aquagard or similar in make of livpurekent

Each 4

10

Demolishion of the existing bituminous road surface to a depth of 150 mm and disposal of demolished material with a lift upto 3 m and lead upto 1000 m

Sqm 50

11

Providing and fixing fine dressed sand stone flooring with white sand stone (Bansh paharpurdholpur stone) (panji marked surface) machine cut of approved shade set in pattern over 30mm thick base in cement mortar 16 including pointing with cement mortar 12 (1 cement2 stone dust) mixed with pigment to match the shade of stone with joint thickness upto 5 mm as per existing flloringsample approved by the consultantapproved by (75mm thick)

Sqm 730

12

Providing and Fixing Cobbles stone of lime sand stone size 100X100MM and theakness of 70 to100mm on path way open court yards of color shade approved by the consultant over cement mortar 13 ( 1 cement3 course sand) keeping 10mm joint between cobbles filled with cement mortar 13 ( 1 cement3 course sand) the mortar should remain recessed by 5mm from the top surface of the cobble stone complete in all respects as per design and details provided by the consultant

Sqm 1650

13

Supply and installation of sanstone signage 450x200 mm of redwhiteapproved shade Sandstone 75 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete with fixing with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 6

30

14

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 450mmx2400mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved with ornamentation in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

15

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 650mmx1200mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

16

Heritage signage shall be etched on to Dulmera stone plaque of size 18m x 14m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 4

17

Signage shall be etched on to Dulmera stone plaque of size 18m x 10m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 12

18

Providing and fixing MS steel sheets 3 mm thickness on to MS anfgles flats tees and hollow sections with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Kg 10640

19

Providing and fixing MS perforated sheets 3 mm thickness with diamondround shaped perforations as per sample approved by the consultant with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Sqm 90

20

Painting of shop signages with lettering in hindienglish and ornamental design patterns in ready mix paint of approved brand and manfacture in all shades to give an even shade as per drawings and details provided by the consultant

Sqm 560

21

Flush pointing over joints of dressed stone cladding chajjas jali etc with neat cement sand amp colour including racking the joints as per Jodhpur practice including all leads and lifts with grinded mortar of lime putty and stone powder mixed in 11 ratio and gur methi gugal etc are to be mixed as per old traditional practice

Sqm 75

22

Khamira Colour Washing as per old traditional practice to prepare the Khamira the lime should be slaked at least for 7-10 days and regularly it should be stirred by adding cured Gugal for non-synthetic colour adding gum (babool gum) as per specificationThen applying prepared solution on walls three to four thin coats as desired finishing

Sqm 1750

31

23

Providing amp applying Lime kara 12 (1lime cream 2 Zikki powder) grinding mortar with grinding millmanually on lime baseon all flat surface in two coatsFirst coat applying 3mm to 4mm thick and curing properly at least 7 dayssecond finishing coat done after 7days of previous coat as per traditional practice(thickness not more than 6 mm)

Sqm 155

TOTAL OF NON SOR WORKS

17

SCHEDULE- V

DETAILS OF MAJOR ITEMS OF CONSTRUCTION PLANT AVAILABLE FOR THIS WORK

S No

Particulars Make Year of manufacture

Nos Whether owned or confirmed lease

1 Lime mortar Mill

2 Scaffolding Material

3 Movable Gantry

Crane etc

4 Any other TampP for

the purpose

5

6

7

8

Signature of Contractor

18

RAJASTHAN TOURISM DEVELOPMENT CORPORATION LIMITED JAIPUR

(WORKS DIVISION)

TENDER DOCUMENT (Financial Bid)

E-Tender (NIT No) 082016-17

Name of work- Pushkar Market Street- Restoration And Development Works

Restoration Conservation work Stained GssMirror

Signature of Contractor

19

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works

(Based on PWD BSR CIVILElectrical Ajmer Circle - 2013 and item rates)

SCHEDULE -G

GENERAL ABSTRACT

SNO WORK AMOUNT

1

PART A- CIVIL WORKS BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

304610000

2

PART B- SANITARY WORKS BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

5936400

3

PART C- HORTICULTURE BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

2627500

4

PART D-NON BSR ITEMS ( CIVIL AND ELECTRICAL)

GRAND TOTAL

I we hereby agree to execute the work PART A In figures Above Below In words

Above below PART B In figures Above Below In words

Above below PART C In figures Above Below In words

Above below PART D In figures Above Below In words

Above below

General Manager Works

RTDC Ltd Jaipur

Signature of the Contractor With Full Postal Address

20

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works

(Based on PWD BSR Civil Ajmer Circle - 2013)

PART A- CIVIL WORKS

SL No Specification Unit Rate QTY Amount

1

Surface Dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr and lift up to 15 Mtr All kinds of soil 100Sqm 437

26

11362

2

Surface Dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr and lift up to 15 Mtr All kinds of soil Cum 127

30

3810

3

Filling available excavated earth (excluding rock) in trenches plinth side of foundation etc in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift Cum 61

12 732

4

Providing and laying in position cement concrete including curing compaction etc complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level

M15 grade Nominal Mix (with graded stone aggregate 20mm nominal size) Cum

3438

230

790740

5

Random Rubble stone masonry for foundation and plinth in Cement Sand mortar above 30 CM thick wall in

21

Cement Mortar 13 ( 1-Cement 3-Sand) Cum

2193

35

76755

6

Random Rubble stone masonry for superstructure above plinth level one storey height above 30cm thick walls in

Cement Mortar 13 ( 1-Cement 3-Sand) Cum

2686

135

362610

7

Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor three level including curing compaction finishing with rendering in cement sand mortar 13 (1 cement 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement for -

Beams suspended floors roofs griders having slopes up to 15ordm landings balconies shelves chajjas lintels bands plain windows sills staircases and spiral staircases etc

M20 grade Nominal Mix

Cum 5138

45

231210

8

Centering amp shuttering with plywood or steel sheets including strutting propping bracing both ways with wooden members and removal of formwork for upto floor three level for

Suspended floors roofs landings staircases balconies girders cantilevers bands coping bed plates anchor blocks sills chhajjas lintel beam etc Sqm 222

60

13320

9

Providing and fabricating reinforcement using steel of SAILVIZAK-RINLTATA TISCONESSARZINDAL VIJAINAGAR IS 1786-1986 for RCC work including straightening cutting bending placing in position and binding (including cost of binding wire) all complete up to floor three level

22

Thermo-Mechanically Treated bars (Conforming of relevent IS code) Kg 78

2630

205140

10

Plaster on new surface on wall in cement sand mortar 13 including racking of joints etc complete fine finish

20mm thick Sqm 161

150

24150

11

6mm thick cement plaster to ceiling of mix 13 (1cement 3 fine sand) Sqm 105

25

2625

12

Polished Blue Kota Stone flooring skirting laid over 20mm thick base of CM 14 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete

13

For area of each slab from 2001 to 5000 SqCm

30mm thick slab

Sqm 988

35

34580

14

Wall Painting with plastic emulsion paint of approved brand and manufacture to give an even shade

Two or more coats on new work including preparation of base with primer putty lippy complete in all respect Sqm 82

76

6232

15

Applying Exterior Emulsion Paint like ACE APEX or equivalent brand and manufacture of required shade to give an even shade including all scaffolding on prepared surface (excluding water primer)

New Work (Two or more coats) Sqm 119

28

3332

16

Applying one coat of Asian Paints DECO Primer (Water thinnable) of approved brand amp manufacture ic scrapping by sand papering and preparing the even surface on wallwall putty as base for ACE APEX or APEX ULTIMA ic all scaffolding(New Surface) Sqm 24

104

2496

23

17

providing and fixing steel gategrating and grills made of anglesteessqure bars flats or blackpipe with holdfast and fitting complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide kg 83

1250

103750

Demolishing cement concrete including disposal of material with in 50 meter lead

136 or richer mix Cum 319

30

9570

148 or leaner mix Cum 311

20

6220

18

Demolishing RCC work manually by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge

Cum 1085

30

32550

19

Rough chisel dressed stone flooring over 20mm (Av) thick base in CM 16 including pointing with cement mortar 12 (1 cement 2 stone dust) with and admixture of pigment to match the shade of stone with joint thickness upto 15mm

45mm thick red sand stone

Sqm 385

230

88550

20

Providing and fixing 1st quality standard white grey ivory fume red brown light green light blue and other light shades glazed tiles confirming to IS 13753 amp IS 15622 of size 300mm x 200mm in walls floors steps pillars etc laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar)

Catogary-A Kajaria Johnson Somani Orient make Sqm 763

25

19075

24

21

Applying one coat industrial grade bitumen of penetration 2585 of approved quality using 170 kg per Sqm on Damp Proof Coarse after cleaning the surface with brushes and finally with a piece of cloth slightly soaked in kerosene oil Sqm 103

45

4635

22

Providing and Fixing 30 too 40 mm thickk stone chajjas in cement sand mortar 14 including making gola at junction with wall concrete M-15 grade (124 nominal mix drip course

20 mm thick plastering in CM 16 on both Sqm 645

35

22575

23

Providing and fixing steel gate grating and grills made of angles tees square bars flatsor black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide

Kg 83

9750

809250

24

Extra if squarerectangular hollow tubelar sections are used or grill made by flats only

Kg

10

6490

64251

P amp F bolts including nuts and bolts complete

Kg 57

240

13680

25

Painting with ready mix paint of approved brand and manufacture in all shades to give an even shade

New Steel Work Sqm 40

1500

60000

Welding by electric plant cmlength 286

15000

42900

TOTAL OF BSR WORKS CIVIL

3046100

25

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - B- SANITARY WORKS

SL No Specification Unit Rate QTY Amount

1

P amp F GI Pipes (External Work) with GI Fittings excluding union (IS 1239 Mark) including trenching amp refilling earth etc

40mm dia nominal bore A Class

Mtr 338

32 10816

25mm dia nominal bore A Class

Mtr 182

48 8736

2

Making connection of GI distribution Branch with GI main including all Fitting

Beyond 25mm amp upto 100mm dia Each 332 8 2656

3

P amp F Sand ndashcast Floor Trap (Nahni) of (IS1729 mark) of approved qualitymake with socket down or hinged grating including cutting and making good the floor- 100 x 100mm Each

421

4 1684

4

P amp F Gun-metal Full-way Valve (IS778 Mark) or wheel valve of approved make

Gun metal 25mm nominal bore Each 702 4 2808

Gun metal 40mm nominal bore Each 1065 4 4260

5

P amp F PVC Storage Tank ISI Marked (IS 12701) indicating the BIS license No) of approved make with cover 25mm dia 1M long GI over-flow pipe amp 25 Cm long wash out pipe with plug amp socket including making connection etc complete of approved design

1000 litres capacity Each 5437 4 21748

6

P amp F push cock superior quality of approved make

CP brass 15 mm

Each 416

16 6656

TOTAL 5936400

26

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - C-HOTICULTURE WORKS

SL No Specification Unit Rate QTY Amount

1

Supply of dry manure including loading unloading transportation amp stacking at site

Goat dungmanure

Cum

50000

35

17500

2

Supply amp Stacking good earth at site complete including loading unloading amp transportation etc Cum

7500

55

4125

3

Supply of different varities of treeshrubsclimbers according to height and age of the plant at site including loadingunloading amp transportation etc complete

Different flowing plants 900mm to 1500mm Each

1500

115

1725

4

Supply of different varities of bougainvillea in poly bagsearthen pots according to height growth amp age of plant at site including loadingunloading amp transportation etc complete

Local variety of bougainvillea 600 mm to 900mm Each

1500

75

1125

5

Digging pits in ordinary soil amp refilling the same with the excavated earth mixed with manure in the ratio 21 by volume (2 parts of stacked volume of earth after reduction by 20 1 parts of stacked volume of manure after reduction by 8) flooding with water and dressing including removal of surplus earth Each

1000

150

1500

27

(Cost of manure or extra good earth if needed to be paid separately) pit dia 60 cm X 60 cm deep

6

Spreading of manure and good earth in required thickness (cost of manure and good earth to be paid separately) Cum

400

75

300

TOTAL OF HORTICULTURE WORKS

26275

28

SCHEDULE OF QUANTITIES

Name of work Pushkar Market Street- Restoration And Development Works

(Based on item rates)

PART - D- NON SOR WORKS

SL No

Specification Unit Rate to

be Quoted

QTY

Amount

1

Providing and fixing fine dressed sand stoneapproved stone JALIas per existing matching geometrical design including moulding work with fine finishing fixing with thambli by proper adhesive and white cement with pigment including making groove etc complete in all respect

(b) 50mm thick Sqm 45

2

Providing amp fixing ashlar Rain water Spouts (3) lines dressed as per traditional practice existing design approved design size 60 x 30 x 25 cm fixing the rain water spout with lime surkhi mortar 12 with proper slope complete in all respect Each

12

3

Providing amp fixing ornamental stone cladding of approved sand stone with dressing complete as per existing designpatternapproved designfixing with 30mm thickgrinded lime surkhi mortar 12 amp pointing with white cement with araldite and pigment to match shade the stone complete in all respect as per direction of Engineer incharge(75mm thick) Sqm

54

4

Providing and fixing fine dressed sand stone Dasacoping as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect

(c) 75mm to 100mm thick with pan patti design Sqm 320

5

Providing and fixing fine dressed sand stone Cladding (Plain dressing only) as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect including removal of damaged cladding

(a) 50mm to 60mm thick Sqm 180

6

Supply and istallation whiteredapproved shade sandstone dustbin of size 800 mm x 450 mm and height 850 mm with hollow center to hang MS Dustbin of size 400mmx 500mmx 600 mm made of 1mm thick metal sheet fixed to stone pillars with MS chain edged with 50x50x5 mm angle sections including cutting welding and fabrication with priming coat of red oxide and approved ready mix paint of approved shadeStone peices joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 26

29

7

Supply and istallation of RedWhiteapproved shade stone bench of size 1500mmx450mmx450 mm horizontal stone members of size 300mmx400mmx450mm on two sides supporting the horizontal seating stone of 150 mm thickness fixed to vertical stone members joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 35

8

Poviding fixing testing and commisioning of Stainless Steel body bull Storage Capacity in (litres) 150 bull Nominal Cooling Capacity (Litreshr) 150 bull No Of Faucets 2 bull Dimensions 820W x 700D x 1235 H bull Normal Demand (glasses hr) 750 bull Refrigerant R-22 bull Current (Amps) 749 bull Water Overflow (Connections) 12 BSP bull Type Of Compressor Rotary Model No- SDLX15150A make Blue star or similar in make of VoltasOasis

Each 4

9

Providing fixing testing and commissioning of water purification system having auto shut-off e-boiling Voltage Stabilizer bull Type of Treatment- sediment filter active carbon cartridge mineral guard UV chamber bull water flow rate 3ltrminbull ultra- violet lamp of 16 watts bull power rating of 35watt bull Dimensions 355H x 1025D x 307WModel ndash Hi fio Make Eureka Forbes- aquagard or similar in make of livpurekent

Each 4

10

Demolishion of the existing bituminous road surface to a depth of 150 mm and disposal of demolished material with a lift upto 3 m and lead upto 1000 m

Sqm 50

11

Providing and fixing fine dressed sand stone flooring with white sand stone (Bansh paharpurdholpur stone) (panji marked surface) machine cut of approved shade set in pattern over 30mm thick base in cement mortar 16 including pointing with cement mortar 12 (1 cement2 stone dust) mixed with pigment to match the shade of stone with joint thickness upto 5 mm as per existing flloringsample approved by the consultantapproved by (75mm thick)

Sqm 730

12

Providing and Fixing Cobbles stone of lime sand stone size 100X100MM and theakness of 70 to100mm on path way open court yards of color shade approved by the consultant over cement mortar 13 ( 1 cement3 course sand) keeping 10mm joint between cobbles filled with cement mortar 13 ( 1 cement3 course sand) the mortar should remain recessed by 5mm from the top surface of the cobble stone complete in all respects as per design and details provided by the consultant

Sqm 1650

13

Supply and installation of sanstone signage 450x200 mm of redwhiteapproved shade Sandstone 75 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete with fixing with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 6

30

14

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 450mmx2400mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved with ornamentation in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

15

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 650mmx1200mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

16

Heritage signage shall be etched on to Dulmera stone plaque of size 18m x 14m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 4

17

Signage shall be etched on to Dulmera stone plaque of size 18m x 10m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 12

18

Providing and fixing MS steel sheets 3 mm thickness on to MS anfgles flats tees and hollow sections with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Kg 10640

19

Providing and fixing MS perforated sheets 3 mm thickness with diamondround shaped perforations as per sample approved by the consultant with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Sqm 90

20

Painting of shop signages with lettering in hindienglish and ornamental design patterns in ready mix paint of approved brand and manfacture in all shades to give an even shade as per drawings and details provided by the consultant

Sqm 560

21

Flush pointing over joints of dressed stone cladding chajjas jali etc with neat cement sand amp colour including racking the joints as per Jodhpur practice including all leads and lifts with grinded mortar of lime putty and stone powder mixed in 11 ratio and gur methi gugal etc are to be mixed as per old traditional practice

Sqm 75

22

Khamira Colour Washing as per old traditional practice to prepare the Khamira the lime should be slaked at least for 7-10 days and regularly it should be stirred by adding cured Gugal for non-synthetic colour adding gum (babool gum) as per specificationThen applying prepared solution on walls three to four thin coats as desired finishing

Sqm 1750

31

23

Providing amp applying Lime kara 12 (1lime cream 2 Zikki powder) grinding mortar with grinding millmanually on lime baseon all flat surface in two coatsFirst coat applying 3mm to 4mm thick and curing properly at least 7 dayssecond finishing coat done after 7days of previous coat as per traditional practice(thickness not more than 6 mm)

Sqm 155

TOTAL OF NON SOR WORKS

18

RAJASTHAN TOURISM DEVELOPMENT CORPORATION LIMITED JAIPUR

(WORKS DIVISION)

TENDER DOCUMENT (Financial Bid)

E-Tender (NIT No) 082016-17

Name of work- Pushkar Market Street- Restoration And Development Works

Restoration Conservation work Stained GssMirror

Signature of Contractor

19

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works

(Based on PWD BSR CIVILElectrical Ajmer Circle - 2013 and item rates)

SCHEDULE -G

GENERAL ABSTRACT

SNO WORK AMOUNT

1

PART A- CIVIL WORKS BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

304610000

2

PART B- SANITARY WORKS BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

5936400

3

PART C- HORTICULTURE BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

2627500

4

PART D-NON BSR ITEMS ( CIVIL AND ELECTRICAL)

GRAND TOTAL

I we hereby agree to execute the work PART A In figures Above Below In words

Above below PART B In figures Above Below In words

Above below PART C In figures Above Below In words

Above below PART D In figures Above Below In words

Above below

General Manager Works

RTDC Ltd Jaipur

Signature of the Contractor With Full Postal Address

20

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works

(Based on PWD BSR Civil Ajmer Circle - 2013)

PART A- CIVIL WORKS

SL No Specification Unit Rate QTY Amount

1

Surface Dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr and lift up to 15 Mtr All kinds of soil 100Sqm 437

26

11362

2

Surface Dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr and lift up to 15 Mtr All kinds of soil Cum 127

30

3810

3

Filling available excavated earth (excluding rock) in trenches plinth side of foundation etc in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift Cum 61

12 732

4

Providing and laying in position cement concrete including curing compaction etc complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level

M15 grade Nominal Mix (with graded stone aggregate 20mm nominal size) Cum

3438

230

790740

5

Random Rubble stone masonry for foundation and plinth in Cement Sand mortar above 30 CM thick wall in

21

Cement Mortar 13 ( 1-Cement 3-Sand) Cum

2193

35

76755

6

Random Rubble stone masonry for superstructure above plinth level one storey height above 30cm thick walls in

Cement Mortar 13 ( 1-Cement 3-Sand) Cum

2686

135

362610

7

Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor three level including curing compaction finishing with rendering in cement sand mortar 13 (1 cement 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement for -

Beams suspended floors roofs griders having slopes up to 15ordm landings balconies shelves chajjas lintels bands plain windows sills staircases and spiral staircases etc

M20 grade Nominal Mix

Cum 5138

45

231210

8

Centering amp shuttering with plywood or steel sheets including strutting propping bracing both ways with wooden members and removal of formwork for upto floor three level for

Suspended floors roofs landings staircases balconies girders cantilevers bands coping bed plates anchor blocks sills chhajjas lintel beam etc Sqm 222

60

13320

9

Providing and fabricating reinforcement using steel of SAILVIZAK-RINLTATA TISCONESSARZINDAL VIJAINAGAR IS 1786-1986 for RCC work including straightening cutting bending placing in position and binding (including cost of binding wire) all complete up to floor three level

22

Thermo-Mechanically Treated bars (Conforming of relevent IS code) Kg 78

2630

205140

10

Plaster on new surface on wall in cement sand mortar 13 including racking of joints etc complete fine finish

20mm thick Sqm 161

150

24150

11

6mm thick cement plaster to ceiling of mix 13 (1cement 3 fine sand) Sqm 105

25

2625

12

Polished Blue Kota Stone flooring skirting laid over 20mm thick base of CM 14 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete

13

For area of each slab from 2001 to 5000 SqCm

30mm thick slab

Sqm 988

35

34580

14

Wall Painting with plastic emulsion paint of approved brand and manufacture to give an even shade

Two or more coats on new work including preparation of base with primer putty lippy complete in all respect Sqm 82

76

6232

15

Applying Exterior Emulsion Paint like ACE APEX or equivalent brand and manufacture of required shade to give an even shade including all scaffolding on prepared surface (excluding water primer)

New Work (Two or more coats) Sqm 119

28

3332

16

Applying one coat of Asian Paints DECO Primer (Water thinnable) of approved brand amp manufacture ic scrapping by sand papering and preparing the even surface on wallwall putty as base for ACE APEX or APEX ULTIMA ic all scaffolding(New Surface) Sqm 24

104

2496

23

17

providing and fixing steel gategrating and grills made of anglesteessqure bars flats or blackpipe with holdfast and fitting complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide kg 83

1250

103750

Demolishing cement concrete including disposal of material with in 50 meter lead

136 or richer mix Cum 319

30

9570

148 or leaner mix Cum 311

20

6220

18

Demolishing RCC work manually by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge

Cum 1085

30

32550

19

Rough chisel dressed stone flooring over 20mm (Av) thick base in CM 16 including pointing with cement mortar 12 (1 cement 2 stone dust) with and admixture of pigment to match the shade of stone with joint thickness upto 15mm

45mm thick red sand stone

Sqm 385

230

88550

20

Providing and fixing 1st quality standard white grey ivory fume red brown light green light blue and other light shades glazed tiles confirming to IS 13753 amp IS 15622 of size 300mm x 200mm in walls floors steps pillars etc laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar)

Catogary-A Kajaria Johnson Somani Orient make Sqm 763

25

19075

24

21

Applying one coat industrial grade bitumen of penetration 2585 of approved quality using 170 kg per Sqm on Damp Proof Coarse after cleaning the surface with brushes and finally with a piece of cloth slightly soaked in kerosene oil Sqm 103

45

4635

22

Providing and Fixing 30 too 40 mm thickk stone chajjas in cement sand mortar 14 including making gola at junction with wall concrete M-15 grade (124 nominal mix drip course

20 mm thick plastering in CM 16 on both Sqm 645

35

22575

23

Providing and fixing steel gate grating and grills made of angles tees square bars flatsor black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide

Kg 83

9750

809250

24

Extra if squarerectangular hollow tubelar sections are used or grill made by flats only

Kg

10

6490

64251

P amp F bolts including nuts and bolts complete

Kg 57

240

13680

25

Painting with ready mix paint of approved brand and manufacture in all shades to give an even shade

New Steel Work Sqm 40

1500

60000

Welding by electric plant cmlength 286

15000

42900

TOTAL OF BSR WORKS CIVIL

3046100

25

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - B- SANITARY WORKS

SL No Specification Unit Rate QTY Amount

1

P amp F GI Pipes (External Work) with GI Fittings excluding union (IS 1239 Mark) including trenching amp refilling earth etc

40mm dia nominal bore A Class

Mtr 338

32 10816

25mm dia nominal bore A Class

Mtr 182

48 8736

2

Making connection of GI distribution Branch with GI main including all Fitting

Beyond 25mm amp upto 100mm dia Each 332 8 2656

3

P amp F Sand ndashcast Floor Trap (Nahni) of (IS1729 mark) of approved qualitymake with socket down or hinged grating including cutting and making good the floor- 100 x 100mm Each

421

4 1684

4

P amp F Gun-metal Full-way Valve (IS778 Mark) or wheel valve of approved make

Gun metal 25mm nominal bore Each 702 4 2808

Gun metal 40mm nominal bore Each 1065 4 4260

5

P amp F PVC Storage Tank ISI Marked (IS 12701) indicating the BIS license No) of approved make with cover 25mm dia 1M long GI over-flow pipe amp 25 Cm long wash out pipe with plug amp socket including making connection etc complete of approved design

1000 litres capacity Each 5437 4 21748

6

P amp F push cock superior quality of approved make

CP brass 15 mm

Each 416

16 6656

TOTAL 5936400

26

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - C-HOTICULTURE WORKS

SL No Specification Unit Rate QTY Amount

1

Supply of dry manure including loading unloading transportation amp stacking at site

Goat dungmanure

Cum

50000

35

17500

2

Supply amp Stacking good earth at site complete including loading unloading amp transportation etc Cum

7500

55

4125

3

Supply of different varities of treeshrubsclimbers according to height and age of the plant at site including loadingunloading amp transportation etc complete

Different flowing plants 900mm to 1500mm Each

1500

115

1725

4

Supply of different varities of bougainvillea in poly bagsearthen pots according to height growth amp age of plant at site including loadingunloading amp transportation etc complete

Local variety of bougainvillea 600 mm to 900mm Each

1500

75

1125

5

Digging pits in ordinary soil amp refilling the same with the excavated earth mixed with manure in the ratio 21 by volume (2 parts of stacked volume of earth after reduction by 20 1 parts of stacked volume of manure after reduction by 8) flooding with water and dressing including removal of surplus earth Each

1000

150

1500

27

(Cost of manure or extra good earth if needed to be paid separately) pit dia 60 cm X 60 cm deep

6

Spreading of manure and good earth in required thickness (cost of manure and good earth to be paid separately) Cum

400

75

300

TOTAL OF HORTICULTURE WORKS

26275

28

SCHEDULE OF QUANTITIES

Name of work Pushkar Market Street- Restoration And Development Works

(Based on item rates)

PART - D- NON SOR WORKS

SL No

Specification Unit Rate to

be Quoted

QTY

Amount

1

Providing and fixing fine dressed sand stoneapproved stone JALIas per existing matching geometrical design including moulding work with fine finishing fixing with thambli by proper adhesive and white cement with pigment including making groove etc complete in all respect

(b) 50mm thick Sqm 45

2

Providing amp fixing ashlar Rain water Spouts (3) lines dressed as per traditional practice existing design approved design size 60 x 30 x 25 cm fixing the rain water spout with lime surkhi mortar 12 with proper slope complete in all respect Each

12

3

Providing amp fixing ornamental stone cladding of approved sand stone with dressing complete as per existing designpatternapproved designfixing with 30mm thickgrinded lime surkhi mortar 12 amp pointing with white cement with araldite and pigment to match shade the stone complete in all respect as per direction of Engineer incharge(75mm thick) Sqm

54

4

Providing and fixing fine dressed sand stone Dasacoping as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect

(c) 75mm to 100mm thick with pan patti design Sqm 320

5

Providing and fixing fine dressed sand stone Cladding (Plain dressing only) as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect including removal of damaged cladding

(a) 50mm to 60mm thick Sqm 180

6

Supply and istallation whiteredapproved shade sandstone dustbin of size 800 mm x 450 mm and height 850 mm with hollow center to hang MS Dustbin of size 400mmx 500mmx 600 mm made of 1mm thick metal sheet fixed to stone pillars with MS chain edged with 50x50x5 mm angle sections including cutting welding and fabrication with priming coat of red oxide and approved ready mix paint of approved shadeStone peices joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 26

29

7

Supply and istallation of RedWhiteapproved shade stone bench of size 1500mmx450mmx450 mm horizontal stone members of size 300mmx400mmx450mm on two sides supporting the horizontal seating stone of 150 mm thickness fixed to vertical stone members joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 35

8

Poviding fixing testing and commisioning of Stainless Steel body bull Storage Capacity in (litres) 150 bull Nominal Cooling Capacity (Litreshr) 150 bull No Of Faucets 2 bull Dimensions 820W x 700D x 1235 H bull Normal Demand (glasses hr) 750 bull Refrigerant R-22 bull Current (Amps) 749 bull Water Overflow (Connections) 12 BSP bull Type Of Compressor Rotary Model No- SDLX15150A make Blue star or similar in make of VoltasOasis

Each 4

9

Providing fixing testing and commissioning of water purification system having auto shut-off e-boiling Voltage Stabilizer bull Type of Treatment- sediment filter active carbon cartridge mineral guard UV chamber bull water flow rate 3ltrminbull ultra- violet lamp of 16 watts bull power rating of 35watt bull Dimensions 355H x 1025D x 307WModel ndash Hi fio Make Eureka Forbes- aquagard or similar in make of livpurekent

Each 4

10

Demolishion of the existing bituminous road surface to a depth of 150 mm and disposal of demolished material with a lift upto 3 m and lead upto 1000 m

Sqm 50

11

Providing and fixing fine dressed sand stone flooring with white sand stone (Bansh paharpurdholpur stone) (panji marked surface) machine cut of approved shade set in pattern over 30mm thick base in cement mortar 16 including pointing with cement mortar 12 (1 cement2 stone dust) mixed with pigment to match the shade of stone with joint thickness upto 5 mm as per existing flloringsample approved by the consultantapproved by (75mm thick)

Sqm 730

12

Providing and Fixing Cobbles stone of lime sand stone size 100X100MM and theakness of 70 to100mm on path way open court yards of color shade approved by the consultant over cement mortar 13 ( 1 cement3 course sand) keeping 10mm joint between cobbles filled with cement mortar 13 ( 1 cement3 course sand) the mortar should remain recessed by 5mm from the top surface of the cobble stone complete in all respects as per design and details provided by the consultant

Sqm 1650

13

Supply and installation of sanstone signage 450x200 mm of redwhiteapproved shade Sandstone 75 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete with fixing with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 6

30

14

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 450mmx2400mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved with ornamentation in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

15

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 650mmx1200mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

16

Heritage signage shall be etched on to Dulmera stone plaque of size 18m x 14m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 4

17

Signage shall be etched on to Dulmera stone plaque of size 18m x 10m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 12

18

Providing and fixing MS steel sheets 3 mm thickness on to MS anfgles flats tees and hollow sections with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Kg 10640

19

Providing and fixing MS perforated sheets 3 mm thickness with diamondround shaped perforations as per sample approved by the consultant with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Sqm 90

20

Painting of shop signages with lettering in hindienglish and ornamental design patterns in ready mix paint of approved brand and manfacture in all shades to give an even shade as per drawings and details provided by the consultant

Sqm 560

21

Flush pointing over joints of dressed stone cladding chajjas jali etc with neat cement sand amp colour including racking the joints as per Jodhpur practice including all leads and lifts with grinded mortar of lime putty and stone powder mixed in 11 ratio and gur methi gugal etc are to be mixed as per old traditional practice

Sqm 75

22

Khamira Colour Washing as per old traditional practice to prepare the Khamira the lime should be slaked at least for 7-10 days and regularly it should be stirred by adding cured Gugal for non-synthetic colour adding gum (babool gum) as per specificationThen applying prepared solution on walls three to four thin coats as desired finishing

Sqm 1750

31

23

Providing amp applying Lime kara 12 (1lime cream 2 Zikki powder) grinding mortar with grinding millmanually on lime baseon all flat surface in two coatsFirst coat applying 3mm to 4mm thick and curing properly at least 7 dayssecond finishing coat done after 7days of previous coat as per traditional practice(thickness not more than 6 mm)

Sqm 155

TOTAL OF NON SOR WORKS

19

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works

(Based on PWD BSR CIVILElectrical Ajmer Circle - 2013 and item rates)

SCHEDULE -G

GENERAL ABSTRACT

SNO WORK AMOUNT

1

PART A- CIVIL WORKS BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

304610000

2

PART B- SANITARY WORKS BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

5936400

3

PART C- HORTICULTURE BASED ON PWD BSR CIVIL 2013- AJMER CIRCLE

2627500

4

PART D-NON BSR ITEMS ( CIVIL AND ELECTRICAL)

GRAND TOTAL

I we hereby agree to execute the work PART A In figures Above Below In words

Above below PART B In figures Above Below In words

Above below PART C In figures Above Below In words

Above below PART D In figures Above Below In words

Above below

General Manager Works

RTDC Ltd Jaipur

Signature of the Contractor With Full Postal Address

20

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works

(Based on PWD BSR Civil Ajmer Circle - 2013)

PART A- CIVIL WORKS

SL No Specification Unit Rate QTY Amount

1

Surface Dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr and lift up to 15 Mtr All kinds of soil 100Sqm 437

26

11362

2

Surface Dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr and lift up to 15 Mtr All kinds of soil Cum 127

30

3810

3

Filling available excavated earth (excluding rock) in trenches plinth side of foundation etc in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift Cum 61

12 732

4

Providing and laying in position cement concrete including curing compaction etc complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level

M15 grade Nominal Mix (with graded stone aggregate 20mm nominal size) Cum

3438

230

790740

5

Random Rubble stone masonry for foundation and plinth in Cement Sand mortar above 30 CM thick wall in

21

Cement Mortar 13 ( 1-Cement 3-Sand) Cum

2193

35

76755

6

Random Rubble stone masonry for superstructure above plinth level one storey height above 30cm thick walls in

Cement Mortar 13 ( 1-Cement 3-Sand) Cum

2686

135

362610

7

Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor three level including curing compaction finishing with rendering in cement sand mortar 13 (1 cement 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement for -

Beams suspended floors roofs griders having slopes up to 15ordm landings balconies shelves chajjas lintels bands plain windows sills staircases and spiral staircases etc

M20 grade Nominal Mix

Cum 5138

45

231210

8

Centering amp shuttering with plywood or steel sheets including strutting propping bracing both ways with wooden members and removal of formwork for upto floor three level for

Suspended floors roofs landings staircases balconies girders cantilevers bands coping bed plates anchor blocks sills chhajjas lintel beam etc Sqm 222

60

13320

9

Providing and fabricating reinforcement using steel of SAILVIZAK-RINLTATA TISCONESSARZINDAL VIJAINAGAR IS 1786-1986 for RCC work including straightening cutting bending placing in position and binding (including cost of binding wire) all complete up to floor three level

22

Thermo-Mechanically Treated bars (Conforming of relevent IS code) Kg 78

2630

205140

10

Plaster on new surface on wall in cement sand mortar 13 including racking of joints etc complete fine finish

20mm thick Sqm 161

150

24150

11

6mm thick cement plaster to ceiling of mix 13 (1cement 3 fine sand) Sqm 105

25

2625

12

Polished Blue Kota Stone flooring skirting laid over 20mm thick base of CM 14 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete

13

For area of each slab from 2001 to 5000 SqCm

30mm thick slab

Sqm 988

35

34580

14

Wall Painting with plastic emulsion paint of approved brand and manufacture to give an even shade

Two or more coats on new work including preparation of base with primer putty lippy complete in all respect Sqm 82

76

6232

15

Applying Exterior Emulsion Paint like ACE APEX or equivalent brand and manufacture of required shade to give an even shade including all scaffolding on prepared surface (excluding water primer)

New Work (Two or more coats) Sqm 119

28

3332

16

Applying one coat of Asian Paints DECO Primer (Water thinnable) of approved brand amp manufacture ic scrapping by sand papering and preparing the even surface on wallwall putty as base for ACE APEX or APEX ULTIMA ic all scaffolding(New Surface) Sqm 24

104

2496

23

17

providing and fixing steel gategrating and grills made of anglesteessqure bars flats or blackpipe with holdfast and fitting complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide kg 83

1250

103750

Demolishing cement concrete including disposal of material with in 50 meter lead

136 or richer mix Cum 319

30

9570

148 or leaner mix Cum 311

20

6220

18

Demolishing RCC work manually by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge

Cum 1085

30

32550

19

Rough chisel dressed stone flooring over 20mm (Av) thick base in CM 16 including pointing with cement mortar 12 (1 cement 2 stone dust) with and admixture of pigment to match the shade of stone with joint thickness upto 15mm

45mm thick red sand stone

Sqm 385

230

88550

20

Providing and fixing 1st quality standard white grey ivory fume red brown light green light blue and other light shades glazed tiles confirming to IS 13753 amp IS 15622 of size 300mm x 200mm in walls floors steps pillars etc laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar)

Catogary-A Kajaria Johnson Somani Orient make Sqm 763

25

19075

24

21

Applying one coat industrial grade bitumen of penetration 2585 of approved quality using 170 kg per Sqm on Damp Proof Coarse after cleaning the surface with brushes and finally with a piece of cloth slightly soaked in kerosene oil Sqm 103

45

4635

22

Providing and Fixing 30 too 40 mm thickk stone chajjas in cement sand mortar 14 including making gola at junction with wall concrete M-15 grade (124 nominal mix drip course

20 mm thick plastering in CM 16 on both Sqm 645

35

22575

23

Providing and fixing steel gate grating and grills made of angles tees square bars flatsor black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide

Kg 83

9750

809250

24

Extra if squarerectangular hollow tubelar sections are used or grill made by flats only

Kg

10

6490

64251

P amp F bolts including nuts and bolts complete

Kg 57

240

13680

25

Painting with ready mix paint of approved brand and manufacture in all shades to give an even shade

New Steel Work Sqm 40

1500

60000

Welding by electric plant cmlength 286

15000

42900

TOTAL OF BSR WORKS CIVIL

3046100

25

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - B- SANITARY WORKS

SL No Specification Unit Rate QTY Amount

1

P amp F GI Pipes (External Work) with GI Fittings excluding union (IS 1239 Mark) including trenching amp refilling earth etc

40mm dia nominal bore A Class

Mtr 338

32 10816

25mm dia nominal bore A Class

Mtr 182

48 8736

2

Making connection of GI distribution Branch with GI main including all Fitting

Beyond 25mm amp upto 100mm dia Each 332 8 2656

3

P amp F Sand ndashcast Floor Trap (Nahni) of (IS1729 mark) of approved qualitymake with socket down or hinged grating including cutting and making good the floor- 100 x 100mm Each

421

4 1684

4

P amp F Gun-metal Full-way Valve (IS778 Mark) or wheel valve of approved make

Gun metal 25mm nominal bore Each 702 4 2808

Gun metal 40mm nominal bore Each 1065 4 4260

5

P amp F PVC Storage Tank ISI Marked (IS 12701) indicating the BIS license No) of approved make with cover 25mm dia 1M long GI over-flow pipe amp 25 Cm long wash out pipe with plug amp socket including making connection etc complete of approved design

1000 litres capacity Each 5437 4 21748

6

P amp F push cock superior quality of approved make

CP brass 15 mm

Each 416

16 6656

TOTAL 5936400

26

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - C-HOTICULTURE WORKS

SL No Specification Unit Rate QTY Amount

1

Supply of dry manure including loading unloading transportation amp stacking at site

Goat dungmanure

Cum

50000

35

17500

2

Supply amp Stacking good earth at site complete including loading unloading amp transportation etc Cum

7500

55

4125

3

Supply of different varities of treeshrubsclimbers according to height and age of the plant at site including loadingunloading amp transportation etc complete

Different flowing plants 900mm to 1500mm Each

1500

115

1725

4

Supply of different varities of bougainvillea in poly bagsearthen pots according to height growth amp age of plant at site including loadingunloading amp transportation etc complete

Local variety of bougainvillea 600 mm to 900mm Each

1500

75

1125

5

Digging pits in ordinary soil amp refilling the same with the excavated earth mixed with manure in the ratio 21 by volume (2 parts of stacked volume of earth after reduction by 20 1 parts of stacked volume of manure after reduction by 8) flooding with water and dressing including removal of surplus earth Each

1000

150

1500

27

(Cost of manure or extra good earth if needed to be paid separately) pit dia 60 cm X 60 cm deep

6

Spreading of manure and good earth in required thickness (cost of manure and good earth to be paid separately) Cum

400

75

300

TOTAL OF HORTICULTURE WORKS

26275

28

SCHEDULE OF QUANTITIES

Name of work Pushkar Market Street- Restoration And Development Works

(Based on item rates)

PART - D- NON SOR WORKS

SL No

Specification Unit Rate to

be Quoted

QTY

Amount

1

Providing and fixing fine dressed sand stoneapproved stone JALIas per existing matching geometrical design including moulding work with fine finishing fixing with thambli by proper adhesive and white cement with pigment including making groove etc complete in all respect

(b) 50mm thick Sqm 45

2

Providing amp fixing ashlar Rain water Spouts (3) lines dressed as per traditional practice existing design approved design size 60 x 30 x 25 cm fixing the rain water spout with lime surkhi mortar 12 with proper slope complete in all respect Each

12

3

Providing amp fixing ornamental stone cladding of approved sand stone with dressing complete as per existing designpatternapproved designfixing with 30mm thickgrinded lime surkhi mortar 12 amp pointing with white cement with araldite and pigment to match shade the stone complete in all respect as per direction of Engineer incharge(75mm thick) Sqm

54

4

Providing and fixing fine dressed sand stone Dasacoping as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect

(c) 75mm to 100mm thick with pan patti design Sqm 320

5

Providing and fixing fine dressed sand stone Cladding (Plain dressing only) as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect including removal of damaged cladding

(a) 50mm to 60mm thick Sqm 180

6

Supply and istallation whiteredapproved shade sandstone dustbin of size 800 mm x 450 mm and height 850 mm with hollow center to hang MS Dustbin of size 400mmx 500mmx 600 mm made of 1mm thick metal sheet fixed to stone pillars with MS chain edged with 50x50x5 mm angle sections including cutting welding and fabrication with priming coat of red oxide and approved ready mix paint of approved shadeStone peices joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 26

29

7

Supply and istallation of RedWhiteapproved shade stone bench of size 1500mmx450mmx450 mm horizontal stone members of size 300mmx400mmx450mm on two sides supporting the horizontal seating stone of 150 mm thickness fixed to vertical stone members joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 35

8

Poviding fixing testing and commisioning of Stainless Steel body bull Storage Capacity in (litres) 150 bull Nominal Cooling Capacity (Litreshr) 150 bull No Of Faucets 2 bull Dimensions 820W x 700D x 1235 H bull Normal Demand (glasses hr) 750 bull Refrigerant R-22 bull Current (Amps) 749 bull Water Overflow (Connections) 12 BSP bull Type Of Compressor Rotary Model No- SDLX15150A make Blue star or similar in make of VoltasOasis

Each 4

9

Providing fixing testing and commissioning of water purification system having auto shut-off e-boiling Voltage Stabilizer bull Type of Treatment- sediment filter active carbon cartridge mineral guard UV chamber bull water flow rate 3ltrminbull ultra- violet lamp of 16 watts bull power rating of 35watt bull Dimensions 355H x 1025D x 307WModel ndash Hi fio Make Eureka Forbes- aquagard or similar in make of livpurekent

Each 4

10

Demolishion of the existing bituminous road surface to a depth of 150 mm and disposal of demolished material with a lift upto 3 m and lead upto 1000 m

Sqm 50

11

Providing and fixing fine dressed sand stone flooring with white sand stone (Bansh paharpurdholpur stone) (panji marked surface) machine cut of approved shade set in pattern over 30mm thick base in cement mortar 16 including pointing with cement mortar 12 (1 cement2 stone dust) mixed with pigment to match the shade of stone with joint thickness upto 5 mm as per existing flloringsample approved by the consultantapproved by (75mm thick)

Sqm 730

12

Providing and Fixing Cobbles stone of lime sand stone size 100X100MM and theakness of 70 to100mm on path way open court yards of color shade approved by the consultant over cement mortar 13 ( 1 cement3 course sand) keeping 10mm joint between cobbles filled with cement mortar 13 ( 1 cement3 course sand) the mortar should remain recessed by 5mm from the top surface of the cobble stone complete in all respects as per design and details provided by the consultant

Sqm 1650

13

Supply and installation of sanstone signage 450x200 mm of redwhiteapproved shade Sandstone 75 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete with fixing with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 6

30

14

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 450mmx2400mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved with ornamentation in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

15

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 650mmx1200mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

16

Heritage signage shall be etched on to Dulmera stone plaque of size 18m x 14m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 4

17

Signage shall be etched on to Dulmera stone plaque of size 18m x 10m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 12

18

Providing and fixing MS steel sheets 3 mm thickness on to MS anfgles flats tees and hollow sections with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Kg 10640

19

Providing and fixing MS perforated sheets 3 mm thickness with diamondround shaped perforations as per sample approved by the consultant with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Sqm 90

20

Painting of shop signages with lettering in hindienglish and ornamental design patterns in ready mix paint of approved brand and manfacture in all shades to give an even shade as per drawings and details provided by the consultant

Sqm 560

21

Flush pointing over joints of dressed stone cladding chajjas jali etc with neat cement sand amp colour including racking the joints as per Jodhpur practice including all leads and lifts with grinded mortar of lime putty and stone powder mixed in 11 ratio and gur methi gugal etc are to be mixed as per old traditional practice

Sqm 75

22

Khamira Colour Washing as per old traditional practice to prepare the Khamira the lime should be slaked at least for 7-10 days and regularly it should be stirred by adding cured Gugal for non-synthetic colour adding gum (babool gum) as per specificationThen applying prepared solution on walls three to four thin coats as desired finishing

Sqm 1750

31

23

Providing amp applying Lime kara 12 (1lime cream 2 Zikki powder) grinding mortar with grinding millmanually on lime baseon all flat surface in two coatsFirst coat applying 3mm to 4mm thick and curing properly at least 7 dayssecond finishing coat done after 7days of previous coat as per traditional practice(thickness not more than 6 mm)

Sqm 155

TOTAL OF NON SOR WORKS

20

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works

(Based on PWD BSR Civil Ajmer Circle - 2013)

PART A- CIVIL WORKS

SL No Specification Unit Rate QTY Amount

1

Surface Dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr and lift up to 15 Mtr All kinds of soil 100Sqm 437

26

11362

2

Surface Dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr and lift up to 15 Mtr All kinds of soil Cum 127

30

3810

3

Filling available excavated earth (excluding rock) in trenches plinth side of foundation etc in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift Cum 61

12 732

4

Providing and laying in position cement concrete including curing compaction etc complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level

M15 grade Nominal Mix (with graded stone aggregate 20mm nominal size) Cum

3438

230

790740

5

Random Rubble stone masonry for foundation and plinth in Cement Sand mortar above 30 CM thick wall in

21

Cement Mortar 13 ( 1-Cement 3-Sand) Cum

2193

35

76755

6

Random Rubble stone masonry for superstructure above plinth level one storey height above 30cm thick walls in

Cement Mortar 13 ( 1-Cement 3-Sand) Cum

2686

135

362610

7

Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor three level including curing compaction finishing with rendering in cement sand mortar 13 (1 cement 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement for -

Beams suspended floors roofs griders having slopes up to 15ordm landings balconies shelves chajjas lintels bands plain windows sills staircases and spiral staircases etc

M20 grade Nominal Mix

Cum 5138

45

231210

8

Centering amp shuttering with plywood or steel sheets including strutting propping bracing both ways with wooden members and removal of formwork for upto floor three level for

Suspended floors roofs landings staircases balconies girders cantilevers bands coping bed plates anchor blocks sills chhajjas lintel beam etc Sqm 222

60

13320

9

Providing and fabricating reinforcement using steel of SAILVIZAK-RINLTATA TISCONESSARZINDAL VIJAINAGAR IS 1786-1986 for RCC work including straightening cutting bending placing in position and binding (including cost of binding wire) all complete up to floor three level

22

Thermo-Mechanically Treated bars (Conforming of relevent IS code) Kg 78

2630

205140

10

Plaster on new surface on wall in cement sand mortar 13 including racking of joints etc complete fine finish

20mm thick Sqm 161

150

24150

11

6mm thick cement plaster to ceiling of mix 13 (1cement 3 fine sand) Sqm 105

25

2625

12

Polished Blue Kota Stone flooring skirting laid over 20mm thick base of CM 14 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete

13

For area of each slab from 2001 to 5000 SqCm

30mm thick slab

Sqm 988

35

34580

14

Wall Painting with plastic emulsion paint of approved brand and manufacture to give an even shade

Two or more coats on new work including preparation of base with primer putty lippy complete in all respect Sqm 82

76

6232

15

Applying Exterior Emulsion Paint like ACE APEX or equivalent brand and manufacture of required shade to give an even shade including all scaffolding on prepared surface (excluding water primer)

New Work (Two or more coats) Sqm 119

28

3332

16

Applying one coat of Asian Paints DECO Primer (Water thinnable) of approved brand amp manufacture ic scrapping by sand papering and preparing the even surface on wallwall putty as base for ACE APEX or APEX ULTIMA ic all scaffolding(New Surface) Sqm 24

104

2496

23

17

providing and fixing steel gategrating and grills made of anglesteessqure bars flats or blackpipe with holdfast and fitting complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide kg 83

1250

103750

Demolishing cement concrete including disposal of material with in 50 meter lead

136 or richer mix Cum 319

30

9570

148 or leaner mix Cum 311

20

6220

18

Demolishing RCC work manually by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge

Cum 1085

30

32550

19

Rough chisel dressed stone flooring over 20mm (Av) thick base in CM 16 including pointing with cement mortar 12 (1 cement 2 stone dust) with and admixture of pigment to match the shade of stone with joint thickness upto 15mm

45mm thick red sand stone

Sqm 385

230

88550

20

Providing and fixing 1st quality standard white grey ivory fume red brown light green light blue and other light shades glazed tiles confirming to IS 13753 amp IS 15622 of size 300mm x 200mm in walls floors steps pillars etc laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar)

Catogary-A Kajaria Johnson Somani Orient make Sqm 763

25

19075

24

21

Applying one coat industrial grade bitumen of penetration 2585 of approved quality using 170 kg per Sqm on Damp Proof Coarse after cleaning the surface with brushes and finally with a piece of cloth slightly soaked in kerosene oil Sqm 103

45

4635

22

Providing and Fixing 30 too 40 mm thickk stone chajjas in cement sand mortar 14 including making gola at junction with wall concrete M-15 grade (124 nominal mix drip course

20 mm thick plastering in CM 16 on both Sqm 645

35

22575

23

Providing and fixing steel gate grating and grills made of angles tees square bars flatsor black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide

Kg 83

9750

809250

24

Extra if squarerectangular hollow tubelar sections are used or grill made by flats only

Kg

10

6490

64251

P amp F bolts including nuts and bolts complete

Kg 57

240

13680

25

Painting with ready mix paint of approved brand and manufacture in all shades to give an even shade

New Steel Work Sqm 40

1500

60000

Welding by electric plant cmlength 286

15000

42900

TOTAL OF BSR WORKS CIVIL

3046100

25

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - B- SANITARY WORKS

SL No Specification Unit Rate QTY Amount

1

P amp F GI Pipes (External Work) with GI Fittings excluding union (IS 1239 Mark) including trenching amp refilling earth etc

40mm dia nominal bore A Class

Mtr 338

32 10816

25mm dia nominal bore A Class

Mtr 182

48 8736

2

Making connection of GI distribution Branch with GI main including all Fitting

Beyond 25mm amp upto 100mm dia Each 332 8 2656

3

P amp F Sand ndashcast Floor Trap (Nahni) of (IS1729 mark) of approved qualitymake with socket down or hinged grating including cutting and making good the floor- 100 x 100mm Each

421

4 1684

4

P amp F Gun-metal Full-way Valve (IS778 Mark) or wheel valve of approved make

Gun metal 25mm nominal bore Each 702 4 2808

Gun metal 40mm nominal bore Each 1065 4 4260

5

P amp F PVC Storage Tank ISI Marked (IS 12701) indicating the BIS license No) of approved make with cover 25mm dia 1M long GI over-flow pipe amp 25 Cm long wash out pipe with plug amp socket including making connection etc complete of approved design

1000 litres capacity Each 5437 4 21748

6

P amp F push cock superior quality of approved make

CP brass 15 mm

Each 416

16 6656

TOTAL 5936400

26

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - C-HOTICULTURE WORKS

SL No Specification Unit Rate QTY Amount

1

Supply of dry manure including loading unloading transportation amp stacking at site

Goat dungmanure

Cum

50000

35

17500

2

Supply amp Stacking good earth at site complete including loading unloading amp transportation etc Cum

7500

55

4125

3

Supply of different varities of treeshrubsclimbers according to height and age of the plant at site including loadingunloading amp transportation etc complete

Different flowing plants 900mm to 1500mm Each

1500

115

1725

4

Supply of different varities of bougainvillea in poly bagsearthen pots according to height growth amp age of plant at site including loadingunloading amp transportation etc complete

Local variety of bougainvillea 600 mm to 900mm Each

1500

75

1125

5

Digging pits in ordinary soil amp refilling the same with the excavated earth mixed with manure in the ratio 21 by volume (2 parts of stacked volume of earth after reduction by 20 1 parts of stacked volume of manure after reduction by 8) flooding with water and dressing including removal of surplus earth Each

1000

150

1500

27

(Cost of manure or extra good earth if needed to be paid separately) pit dia 60 cm X 60 cm deep

6

Spreading of manure and good earth in required thickness (cost of manure and good earth to be paid separately) Cum

400

75

300

TOTAL OF HORTICULTURE WORKS

26275

28

SCHEDULE OF QUANTITIES

Name of work Pushkar Market Street- Restoration And Development Works

(Based on item rates)

PART - D- NON SOR WORKS

SL No

Specification Unit Rate to

be Quoted

QTY

Amount

1

Providing and fixing fine dressed sand stoneapproved stone JALIas per existing matching geometrical design including moulding work with fine finishing fixing with thambli by proper adhesive and white cement with pigment including making groove etc complete in all respect

(b) 50mm thick Sqm 45

2

Providing amp fixing ashlar Rain water Spouts (3) lines dressed as per traditional practice existing design approved design size 60 x 30 x 25 cm fixing the rain water spout with lime surkhi mortar 12 with proper slope complete in all respect Each

12

3

Providing amp fixing ornamental stone cladding of approved sand stone with dressing complete as per existing designpatternapproved designfixing with 30mm thickgrinded lime surkhi mortar 12 amp pointing with white cement with araldite and pigment to match shade the stone complete in all respect as per direction of Engineer incharge(75mm thick) Sqm

54

4

Providing and fixing fine dressed sand stone Dasacoping as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect

(c) 75mm to 100mm thick with pan patti design Sqm 320

5

Providing and fixing fine dressed sand stone Cladding (Plain dressing only) as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect including removal of damaged cladding

(a) 50mm to 60mm thick Sqm 180

6

Supply and istallation whiteredapproved shade sandstone dustbin of size 800 mm x 450 mm and height 850 mm with hollow center to hang MS Dustbin of size 400mmx 500mmx 600 mm made of 1mm thick metal sheet fixed to stone pillars with MS chain edged with 50x50x5 mm angle sections including cutting welding and fabrication with priming coat of red oxide and approved ready mix paint of approved shadeStone peices joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 26

29

7

Supply and istallation of RedWhiteapproved shade stone bench of size 1500mmx450mmx450 mm horizontal stone members of size 300mmx400mmx450mm on two sides supporting the horizontal seating stone of 150 mm thickness fixed to vertical stone members joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 35

8

Poviding fixing testing and commisioning of Stainless Steel body bull Storage Capacity in (litres) 150 bull Nominal Cooling Capacity (Litreshr) 150 bull No Of Faucets 2 bull Dimensions 820W x 700D x 1235 H bull Normal Demand (glasses hr) 750 bull Refrigerant R-22 bull Current (Amps) 749 bull Water Overflow (Connections) 12 BSP bull Type Of Compressor Rotary Model No- SDLX15150A make Blue star or similar in make of VoltasOasis

Each 4

9

Providing fixing testing and commissioning of water purification system having auto shut-off e-boiling Voltage Stabilizer bull Type of Treatment- sediment filter active carbon cartridge mineral guard UV chamber bull water flow rate 3ltrminbull ultra- violet lamp of 16 watts bull power rating of 35watt bull Dimensions 355H x 1025D x 307WModel ndash Hi fio Make Eureka Forbes- aquagard or similar in make of livpurekent

Each 4

10

Demolishion of the existing bituminous road surface to a depth of 150 mm and disposal of demolished material with a lift upto 3 m and lead upto 1000 m

Sqm 50

11

Providing and fixing fine dressed sand stone flooring with white sand stone (Bansh paharpurdholpur stone) (panji marked surface) machine cut of approved shade set in pattern over 30mm thick base in cement mortar 16 including pointing with cement mortar 12 (1 cement2 stone dust) mixed with pigment to match the shade of stone with joint thickness upto 5 mm as per existing flloringsample approved by the consultantapproved by (75mm thick)

Sqm 730

12

Providing and Fixing Cobbles stone of lime sand stone size 100X100MM and theakness of 70 to100mm on path way open court yards of color shade approved by the consultant over cement mortar 13 ( 1 cement3 course sand) keeping 10mm joint between cobbles filled with cement mortar 13 ( 1 cement3 course sand) the mortar should remain recessed by 5mm from the top surface of the cobble stone complete in all respects as per design and details provided by the consultant

Sqm 1650

13

Supply and installation of sanstone signage 450x200 mm of redwhiteapproved shade Sandstone 75 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete with fixing with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 6

30

14

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 450mmx2400mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved with ornamentation in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

15

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 650mmx1200mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

16

Heritage signage shall be etched on to Dulmera stone plaque of size 18m x 14m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 4

17

Signage shall be etched on to Dulmera stone plaque of size 18m x 10m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 12

18

Providing and fixing MS steel sheets 3 mm thickness on to MS anfgles flats tees and hollow sections with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Kg 10640

19

Providing and fixing MS perforated sheets 3 mm thickness with diamondround shaped perforations as per sample approved by the consultant with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Sqm 90

20

Painting of shop signages with lettering in hindienglish and ornamental design patterns in ready mix paint of approved brand and manfacture in all shades to give an even shade as per drawings and details provided by the consultant

Sqm 560

21

Flush pointing over joints of dressed stone cladding chajjas jali etc with neat cement sand amp colour including racking the joints as per Jodhpur practice including all leads and lifts with grinded mortar of lime putty and stone powder mixed in 11 ratio and gur methi gugal etc are to be mixed as per old traditional practice

Sqm 75

22

Khamira Colour Washing as per old traditional practice to prepare the Khamira the lime should be slaked at least for 7-10 days and regularly it should be stirred by adding cured Gugal for non-synthetic colour adding gum (babool gum) as per specificationThen applying prepared solution on walls three to four thin coats as desired finishing

Sqm 1750

31

23

Providing amp applying Lime kara 12 (1lime cream 2 Zikki powder) grinding mortar with grinding millmanually on lime baseon all flat surface in two coatsFirst coat applying 3mm to 4mm thick and curing properly at least 7 dayssecond finishing coat done after 7days of previous coat as per traditional practice(thickness not more than 6 mm)

Sqm 155

TOTAL OF NON SOR WORKS

21

Cement Mortar 13 ( 1-Cement 3-Sand) Cum

2193

35

76755

6

Random Rubble stone masonry for superstructure above plinth level one storey height above 30cm thick walls in

Cement Mortar 13 ( 1-Cement 3-Sand) Cum

2686

135

362610

7

Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor three level including curing compaction finishing with rendering in cement sand mortar 13 (1 cement 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement for -

Beams suspended floors roofs griders having slopes up to 15ordm landings balconies shelves chajjas lintels bands plain windows sills staircases and spiral staircases etc

M20 grade Nominal Mix

Cum 5138

45

231210

8

Centering amp shuttering with plywood or steel sheets including strutting propping bracing both ways with wooden members and removal of formwork for upto floor three level for

Suspended floors roofs landings staircases balconies girders cantilevers bands coping bed plates anchor blocks sills chhajjas lintel beam etc Sqm 222

60

13320

9

Providing and fabricating reinforcement using steel of SAILVIZAK-RINLTATA TISCONESSARZINDAL VIJAINAGAR IS 1786-1986 for RCC work including straightening cutting bending placing in position and binding (including cost of binding wire) all complete up to floor three level

22

Thermo-Mechanically Treated bars (Conforming of relevent IS code) Kg 78

2630

205140

10

Plaster on new surface on wall in cement sand mortar 13 including racking of joints etc complete fine finish

20mm thick Sqm 161

150

24150

11

6mm thick cement plaster to ceiling of mix 13 (1cement 3 fine sand) Sqm 105

25

2625

12

Polished Blue Kota Stone flooring skirting laid over 20mm thick base of CM 14 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete

13

For area of each slab from 2001 to 5000 SqCm

30mm thick slab

Sqm 988

35

34580

14

Wall Painting with plastic emulsion paint of approved brand and manufacture to give an even shade

Two or more coats on new work including preparation of base with primer putty lippy complete in all respect Sqm 82

76

6232

15

Applying Exterior Emulsion Paint like ACE APEX or equivalent brand and manufacture of required shade to give an even shade including all scaffolding on prepared surface (excluding water primer)

New Work (Two or more coats) Sqm 119

28

3332

16

Applying one coat of Asian Paints DECO Primer (Water thinnable) of approved brand amp manufacture ic scrapping by sand papering and preparing the even surface on wallwall putty as base for ACE APEX or APEX ULTIMA ic all scaffolding(New Surface) Sqm 24

104

2496

23

17

providing and fixing steel gategrating and grills made of anglesteessqure bars flats or blackpipe with holdfast and fitting complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide kg 83

1250

103750

Demolishing cement concrete including disposal of material with in 50 meter lead

136 or richer mix Cum 319

30

9570

148 or leaner mix Cum 311

20

6220

18

Demolishing RCC work manually by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge

Cum 1085

30

32550

19

Rough chisel dressed stone flooring over 20mm (Av) thick base in CM 16 including pointing with cement mortar 12 (1 cement 2 stone dust) with and admixture of pigment to match the shade of stone with joint thickness upto 15mm

45mm thick red sand stone

Sqm 385

230

88550

20

Providing and fixing 1st quality standard white grey ivory fume red brown light green light blue and other light shades glazed tiles confirming to IS 13753 amp IS 15622 of size 300mm x 200mm in walls floors steps pillars etc laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar)

Catogary-A Kajaria Johnson Somani Orient make Sqm 763

25

19075

24

21

Applying one coat industrial grade bitumen of penetration 2585 of approved quality using 170 kg per Sqm on Damp Proof Coarse after cleaning the surface with brushes and finally with a piece of cloth slightly soaked in kerosene oil Sqm 103

45

4635

22

Providing and Fixing 30 too 40 mm thickk stone chajjas in cement sand mortar 14 including making gola at junction with wall concrete M-15 grade (124 nominal mix drip course

20 mm thick plastering in CM 16 on both Sqm 645

35

22575

23

Providing and fixing steel gate grating and grills made of angles tees square bars flatsor black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide

Kg 83

9750

809250

24

Extra if squarerectangular hollow tubelar sections are used or grill made by flats only

Kg

10

6490

64251

P amp F bolts including nuts and bolts complete

Kg 57

240

13680

25

Painting with ready mix paint of approved brand and manufacture in all shades to give an even shade

New Steel Work Sqm 40

1500

60000

Welding by electric plant cmlength 286

15000

42900

TOTAL OF BSR WORKS CIVIL

3046100

25

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - B- SANITARY WORKS

SL No Specification Unit Rate QTY Amount

1

P amp F GI Pipes (External Work) with GI Fittings excluding union (IS 1239 Mark) including trenching amp refilling earth etc

40mm dia nominal bore A Class

Mtr 338

32 10816

25mm dia nominal bore A Class

Mtr 182

48 8736

2

Making connection of GI distribution Branch with GI main including all Fitting

Beyond 25mm amp upto 100mm dia Each 332 8 2656

3

P amp F Sand ndashcast Floor Trap (Nahni) of (IS1729 mark) of approved qualitymake with socket down or hinged grating including cutting and making good the floor- 100 x 100mm Each

421

4 1684

4

P amp F Gun-metal Full-way Valve (IS778 Mark) or wheel valve of approved make

Gun metal 25mm nominal bore Each 702 4 2808

Gun metal 40mm nominal bore Each 1065 4 4260

5

P amp F PVC Storage Tank ISI Marked (IS 12701) indicating the BIS license No) of approved make with cover 25mm dia 1M long GI over-flow pipe amp 25 Cm long wash out pipe with plug amp socket including making connection etc complete of approved design

1000 litres capacity Each 5437 4 21748

6

P amp F push cock superior quality of approved make

CP brass 15 mm

Each 416

16 6656

TOTAL 5936400

26

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - C-HOTICULTURE WORKS

SL No Specification Unit Rate QTY Amount

1

Supply of dry manure including loading unloading transportation amp stacking at site

Goat dungmanure

Cum

50000

35

17500

2

Supply amp Stacking good earth at site complete including loading unloading amp transportation etc Cum

7500

55

4125

3

Supply of different varities of treeshrubsclimbers according to height and age of the plant at site including loadingunloading amp transportation etc complete

Different flowing plants 900mm to 1500mm Each

1500

115

1725

4

Supply of different varities of bougainvillea in poly bagsearthen pots according to height growth amp age of plant at site including loadingunloading amp transportation etc complete

Local variety of bougainvillea 600 mm to 900mm Each

1500

75

1125

5

Digging pits in ordinary soil amp refilling the same with the excavated earth mixed with manure in the ratio 21 by volume (2 parts of stacked volume of earth after reduction by 20 1 parts of stacked volume of manure after reduction by 8) flooding with water and dressing including removal of surplus earth Each

1000

150

1500

27

(Cost of manure or extra good earth if needed to be paid separately) pit dia 60 cm X 60 cm deep

6

Spreading of manure and good earth in required thickness (cost of manure and good earth to be paid separately) Cum

400

75

300

TOTAL OF HORTICULTURE WORKS

26275

28

SCHEDULE OF QUANTITIES

Name of work Pushkar Market Street- Restoration And Development Works

(Based on item rates)

PART - D- NON SOR WORKS

SL No

Specification Unit Rate to

be Quoted

QTY

Amount

1

Providing and fixing fine dressed sand stoneapproved stone JALIas per existing matching geometrical design including moulding work with fine finishing fixing with thambli by proper adhesive and white cement with pigment including making groove etc complete in all respect

(b) 50mm thick Sqm 45

2

Providing amp fixing ashlar Rain water Spouts (3) lines dressed as per traditional practice existing design approved design size 60 x 30 x 25 cm fixing the rain water spout with lime surkhi mortar 12 with proper slope complete in all respect Each

12

3

Providing amp fixing ornamental stone cladding of approved sand stone with dressing complete as per existing designpatternapproved designfixing with 30mm thickgrinded lime surkhi mortar 12 amp pointing with white cement with araldite and pigment to match shade the stone complete in all respect as per direction of Engineer incharge(75mm thick) Sqm

54

4

Providing and fixing fine dressed sand stone Dasacoping as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect

(c) 75mm to 100mm thick with pan patti design Sqm 320

5

Providing and fixing fine dressed sand stone Cladding (Plain dressing only) as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect including removal of damaged cladding

(a) 50mm to 60mm thick Sqm 180

6

Supply and istallation whiteredapproved shade sandstone dustbin of size 800 mm x 450 mm and height 850 mm with hollow center to hang MS Dustbin of size 400mmx 500mmx 600 mm made of 1mm thick metal sheet fixed to stone pillars with MS chain edged with 50x50x5 mm angle sections including cutting welding and fabrication with priming coat of red oxide and approved ready mix paint of approved shadeStone peices joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 26

29

7

Supply and istallation of RedWhiteapproved shade stone bench of size 1500mmx450mmx450 mm horizontal stone members of size 300mmx400mmx450mm on two sides supporting the horizontal seating stone of 150 mm thickness fixed to vertical stone members joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 35

8

Poviding fixing testing and commisioning of Stainless Steel body bull Storage Capacity in (litres) 150 bull Nominal Cooling Capacity (Litreshr) 150 bull No Of Faucets 2 bull Dimensions 820W x 700D x 1235 H bull Normal Demand (glasses hr) 750 bull Refrigerant R-22 bull Current (Amps) 749 bull Water Overflow (Connections) 12 BSP bull Type Of Compressor Rotary Model No- SDLX15150A make Blue star or similar in make of VoltasOasis

Each 4

9

Providing fixing testing and commissioning of water purification system having auto shut-off e-boiling Voltage Stabilizer bull Type of Treatment- sediment filter active carbon cartridge mineral guard UV chamber bull water flow rate 3ltrminbull ultra- violet lamp of 16 watts bull power rating of 35watt bull Dimensions 355H x 1025D x 307WModel ndash Hi fio Make Eureka Forbes- aquagard or similar in make of livpurekent

Each 4

10

Demolishion of the existing bituminous road surface to a depth of 150 mm and disposal of demolished material with a lift upto 3 m and lead upto 1000 m

Sqm 50

11

Providing and fixing fine dressed sand stone flooring with white sand stone (Bansh paharpurdholpur stone) (panji marked surface) machine cut of approved shade set in pattern over 30mm thick base in cement mortar 16 including pointing with cement mortar 12 (1 cement2 stone dust) mixed with pigment to match the shade of stone with joint thickness upto 5 mm as per existing flloringsample approved by the consultantapproved by (75mm thick)

Sqm 730

12

Providing and Fixing Cobbles stone of lime sand stone size 100X100MM and theakness of 70 to100mm on path way open court yards of color shade approved by the consultant over cement mortar 13 ( 1 cement3 course sand) keeping 10mm joint between cobbles filled with cement mortar 13 ( 1 cement3 course sand) the mortar should remain recessed by 5mm from the top surface of the cobble stone complete in all respects as per design and details provided by the consultant

Sqm 1650

13

Supply and installation of sanstone signage 450x200 mm of redwhiteapproved shade Sandstone 75 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete with fixing with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 6

30

14

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 450mmx2400mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved with ornamentation in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

15

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 650mmx1200mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

16

Heritage signage shall be etched on to Dulmera stone plaque of size 18m x 14m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 4

17

Signage shall be etched on to Dulmera stone plaque of size 18m x 10m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 12

18

Providing and fixing MS steel sheets 3 mm thickness on to MS anfgles flats tees and hollow sections with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Kg 10640

19

Providing and fixing MS perforated sheets 3 mm thickness with diamondround shaped perforations as per sample approved by the consultant with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Sqm 90

20

Painting of shop signages with lettering in hindienglish and ornamental design patterns in ready mix paint of approved brand and manfacture in all shades to give an even shade as per drawings and details provided by the consultant

Sqm 560

21

Flush pointing over joints of dressed stone cladding chajjas jali etc with neat cement sand amp colour including racking the joints as per Jodhpur practice including all leads and lifts with grinded mortar of lime putty and stone powder mixed in 11 ratio and gur methi gugal etc are to be mixed as per old traditional practice

Sqm 75

22

Khamira Colour Washing as per old traditional practice to prepare the Khamira the lime should be slaked at least for 7-10 days and regularly it should be stirred by adding cured Gugal for non-synthetic colour adding gum (babool gum) as per specificationThen applying prepared solution on walls three to four thin coats as desired finishing

Sqm 1750

31

23

Providing amp applying Lime kara 12 (1lime cream 2 Zikki powder) grinding mortar with grinding millmanually on lime baseon all flat surface in two coatsFirst coat applying 3mm to 4mm thick and curing properly at least 7 dayssecond finishing coat done after 7days of previous coat as per traditional practice(thickness not more than 6 mm)

Sqm 155

TOTAL OF NON SOR WORKS

22

Thermo-Mechanically Treated bars (Conforming of relevent IS code) Kg 78

2630

205140

10

Plaster on new surface on wall in cement sand mortar 13 including racking of joints etc complete fine finish

20mm thick Sqm 161

150

24150

11

6mm thick cement plaster to ceiling of mix 13 (1cement 3 fine sand) Sqm 105

25

2625

12

Polished Blue Kota Stone flooring skirting laid over 20mm thick base of CM 14 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete

13

For area of each slab from 2001 to 5000 SqCm

30mm thick slab

Sqm 988

35

34580

14

Wall Painting with plastic emulsion paint of approved brand and manufacture to give an even shade

Two or more coats on new work including preparation of base with primer putty lippy complete in all respect Sqm 82

76

6232

15

Applying Exterior Emulsion Paint like ACE APEX or equivalent brand and manufacture of required shade to give an even shade including all scaffolding on prepared surface (excluding water primer)

New Work (Two or more coats) Sqm 119

28

3332

16

Applying one coat of Asian Paints DECO Primer (Water thinnable) of approved brand amp manufacture ic scrapping by sand papering and preparing the even surface on wallwall putty as base for ACE APEX or APEX ULTIMA ic all scaffolding(New Surface) Sqm 24

104

2496

23

17

providing and fixing steel gategrating and grills made of anglesteessqure bars flats or blackpipe with holdfast and fitting complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide kg 83

1250

103750

Demolishing cement concrete including disposal of material with in 50 meter lead

136 or richer mix Cum 319

30

9570

148 or leaner mix Cum 311

20

6220

18

Demolishing RCC work manually by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge

Cum 1085

30

32550

19

Rough chisel dressed stone flooring over 20mm (Av) thick base in CM 16 including pointing with cement mortar 12 (1 cement 2 stone dust) with and admixture of pigment to match the shade of stone with joint thickness upto 15mm

45mm thick red sand stone

Sqm 385

230

88550

20

Providing and fixing 1st quality standard white grey ivory fume red brown light green light blue and other light shades glazed tiles confirming to IS 13753 amp IS 15622 of size 300mm x 200mm in walls floors steps pillars etc laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar)

Catogary-A Kajaria Johnson Somani Orient make Sqm 763

25

19075

24

21

Applying one coat industrial grade bitumen of penetration 2585 of approved quality using 170 kg per Sqm on Damp Proof Coarse after cleaning the surface with brushes and finally with a piece of cloth slightly soaked in kerosene oil Sqm 103

45

4635

22

Providing and Fixing 30 too 40 mm thickk stone chajjas in cement sand mortar 14 including making gola at junction with wall concrete M-15 grade (124 nominal mix drip course

20 mm thick plastering in CM 16 on both Sqm 645

35

22575

23

Providing and fixing steel gate grating and grills made of angles tees square bars flatsor black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide

Kg 83

9750

809250

24

Extra if squarerectangular hollow tubelar sections are used or grill made by flats only

Kg

10

6490

64251

P amp F bolts including nuts and bolts complete

Kg 57

240

13680

25

Painting with ready mix paint of approved brand and manufacture in all shades to give an even shade

New Steel Work Sqm 40

1500

60000

Welding by electric plant cmlength 286

15000

42900

TOTAL OF BSR WORKS CIVIL

3046100

25

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - B- SANITARY WORKS

SL No Specification Unit Rate QTY Amount

1

P amp F GI Pipes (External Work) with GI Fittings excluding union (IS 1239 Mark) including trenching amp refilling earth etc

40mm dia nominal bore A Class

Mtr 338

32 10816

25mm dia nominal bore A Class

Mtr 182

48 8736

2

Making connection of GI distribution Branch with GI main including all Fitting

Beyond 25mm amp upto 100mm dia Each 332 8 2656

3

P amp F Sand ndashcast Floor Trap (Nahni) of (IS1729 mark) of approved qualitymake with socket down or hinged grating including cutting and making good the floor- 100 x 100mm Each

421

4 1684

4

P amp F Gun-metal Full-way Valve (IS778 Mark) or wheel valve of approved make

Gun metal 25mm nominal bore Each 702 4 2808

Gun metal 40mm nominal bore Each 1065 4 4260

5

P amp F PVC Storage Tank ISI Marked (IS 12701) indicating the BIS license No) of approved make with cover 25mm dia 1M long GI over-flow pipe amp 25 Cm long wash out pipe with plug amp socket including making connection etc complete of approved design

1000 litres capacity Each 5437 4 21748

6

P amp F push cock superior quality of approved make

CP brass 15 mm

Each 416

16 6656

TOTAL 5936400

26

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - C-HOTICULTURE WORKS

SL No Specification Unit Rate QTY Amount

1

Supply of dry manure including loading unloading transportation amp stacking at site

Goat dungmanure

Cum

50000

35

17500

2

Supply amp Stacking good earth at site complete including loading unloading amp transportation etc Cum

7500

55

4125

3

Supply of different varities of treeshrubsclimbers according to height and age of the plant at site including loadingunloading amp transportation etc complete

Different flowing plants 900mm to 1500mm Each

1500

115

1725

4

Supply of different varities of bougainvillea in poly bagsearthen pots according to height growth amp age of plant at site including loadingunloading amp transportation etc complete

Local variety of bougainvillea 600 mm to 900mm Each

1500

75

1125

5

Digging pits in ordinary soil amp refilling the same with the excavated earth mixed with manure in the ratio 21 by volume (2 parts of stacked volume of earth after reduction by 20 1 parts of stacked volume of manure after reduction by 8) flooding with water and dressing including removal of surplus earth Each

1000

150

1500

27

(Cost of manure or extra good earth if needed to be paid separately) pit dia 60 cm X 60 cm deep

6

Spreading of manure and good earth in required thickness (cost of manure and good earth to be paid separately) Cum

400

75

300

TOTAL OF HORTICULTURE WORKS

26275

28

SCHEDULE OF QUANTITIES

Name of work Pushkar Market Street- Restoration And Development Works

(Based on item rates)

PART - D- NON SOR WORKS

SL No

Specification Unit Rate to

be Quoted

QTY

Amount

1

Providing and fixing fine dressed sand stoneapproved stone JALIas per existing matching geometrical design including moulding work with fine finishing fixing with thambli by proper adhesive and white cement with pigment including making groove etc complete in all respect

(b) 50mm thick Sqm 45

2

Providing amp fixing ashlar Rain water Spouts (3) lines dressed as per traditional practice existing design approved design size 60 x 30 x 25 cm fixing the rain water spout with lime surkhi mortar 12 with proper slope complete in all respect Each

12

3

Providing amp fixing ornamental stone cladding of approved sand stone with dressing complete as per existing designpatternapproved designfixing with 30mm thickgrinded lime surkhi mortar 12 amp pointing with white cement with araldite and pigment to match shade the stone complete in all respect as per direction of Engineer incharge(75mm thick) Sqm

54

4

Providing and fixing fine dressed sand stone Dasacoping as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect

(c) 75mm to 100mm thick with pan patti design Sqm 320

5

Providing and fixing fine dressed sand stone Cladding (Plain dressing only) as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect including removal of damaged cladding

(a) 50mm to 60mm thick Sqm 180

6

Supply and istallation whiteredapproved shade sandstone dustbin of size 800 mm x 450 mm and height 850 mm with hollow center to hang MS Dustbin of size 400mmx 500mmx 600 mm made of 1mm thick metal sheet fixed to stone pillars with MS chain edged with 50x50x5 mm angle sections including cutting welding and fabrication with priming coat of red oxide and approved ready mix paint of approved shadeStone peices joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 26

29

7

Supply and istallation of RedWhiteapproved shade stone bench of size 1500mmx450mmx450 mm horizontal stone members of size 300mmx400mmx450mm on two sides supporting the horizontal seating stone of 150 mm thickness fixed to vertical stone members joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 35

8

Poviding fixing testing and commisioning of Stainless Steel body bull Storage Capacity in (litres) 150 bull Nominal Cooling Capacity (Litreshr) 150 bull No Of Faucets 2 bull Dimensions 820W x 700D x 1235 H bull Normal Demand (glasses hr) 750 bull Refrigerant R-22 bull Current (Amps) 749 bull Water Overflow (Connections) 12 BSP bull Type Of Compressor Rotary Model No- SDLX15150A make Blue star or similar in make of VoltasOasis

Each 4

9

Providing fixing testing and commissioning of water purification system having auto shut-off e-boiling Voltage Stabilizer bull Type of Treatment- sediment filter active carbon cartridge mineral guard UV chamber bull water flow rate 3ltrminbull ultra- violet lamp of 16 watts bull power rating of 35watt bull Dimensions 355H x 1025D x 307WModel ndash Hi fio Make Eureka Forbes- aquagard or similar in make of livpurekent

Each 4

10

Demolishion of the existing bituminous road surface to a depth of 150 mm and disposal of demolished material with a lift upto 3 m and lead upto 1000 m

Sqm 50

11

Providing and fixing fine dressed sand stone flooring with white sand stone (Bansh paharpurdholpur stone) (panji marked surface) machine cut of approved shade set in pattern over 30mm thick base in cement mortar 16 including pointing with cement mortar 12 (1 cement2 stone dust) mixed with pigment to match the shade of stone with joint thickness upto 5 mm as per existing flloringsample approved by the consultantapproved by (75mm thick)

Sqm 730

12

Providing and Fixing Cobbles stone of lime sand stone size 100X100MM and theakness of 70 to100mm on path way open court yards of color shade approved by the consultant over cement mortar 13 ( 1 cement3 course sand) keeping 10mm joint between cobbles filled with cement mortar 13 ( 1 cement3 course sand) the mortar should remain recessed by 5mm from the top surface of the cobble stone complete in all respects as per design and details provided by the consultant

Sqm 1650

13

Supply and installation of sanstone signage 450x200 mm of redwhiteapproved shade Sandstone 75 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete with fixing with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 6

30

14

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 450mmx2400mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved with ornamentation in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

15

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 650mmx1200mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

16

Heritage signage shall be etched on to Dulmera stone plaque of size 18m x 14m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 4

17

Signage shall be etched on to Dulmera stone plaque of size 18m x 10m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 12

18

Providing and fixing MS steel sheets 3 mm thickness on to MS anfgles flats tees and hollow sections with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Kg 10640

19

Providing and fixing MS perforated sheets 3 mm thickness with diamondround shaped perforations as per sample approved by the consultant with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Sqm 90

20

Painting of shop signages with lettering in hindienglish and ornamental design patterns in ready mix paint of approved brand and manfacture in all shades to give an even shade as per drawings and details provided by the consultant

Sqm 560

21

Flush pointing over joints of dressed stone cladding chajjas jali etc with neat cement sand amp colour including racking the joints as per Jodhpur practice including all leads and lifts with grinded mortar of lime putty and stone powder mixed in 11 ratio and gur methi gugal etc are to be mixed as per old traditional practice

Sqm 75

22

Khamira Colour Washing as per old traditional practice to prepare the Khamira the lime should be slaked at least for 7-10 days and regularly it should be stirred by adding cured Gugal for non-synthetic colour adding gum (babool gum) as per specificationThen applying prepared solution on walls three to four thin coats as desired finishing

Sqm 1750

31

23

Providing amp applying Lime kara 12 (1lime cream 2 Zikki powder) grinding mortar with grinding millmanually on lime baseon all flat surface in two coatsFirst coat applying 3mm to 4mm thick and curing properly at least 7 dayssecond finishing coat done after 7days of previous coat as per traditional practice(thickness not more than 6 mm)

Sqm 155

TOTAL OF NON SOR WORKS

23

17

providing and fixing steel gategrating and grills made of anglesteessqure bars flats or blackpipe with holdfast and fitting complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide kg 83

1250

103750

Demolishing cement concrete including disposal of material with in 50 meter lead

136 or richer mix Cum 319

30

9570

148 or leaner mix Cum 311

20

6220

18

Demolishing RCC work manually by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge

Cum 1085

30

32550

19

Rough chisel dressed stone flooring over 20mm (Av) thick base in CM 16 including pointing with cement mortar 12 (1 cement 2 stone dust) with and admixture of pigment to match the shade of stone with joint thickness upto 15mm

45mm thick red sand stone

Sqm 385

230

88550

20

Providing and fixing 1st quality standard white grey ivory fume red brown light green light blue and other light shades glazed tiles confirming to IS 13753 amp IS 15622 of size 300mm x 200mm in walls floors steps pillars etc laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar)

Catogary-A Kajaria Johnson Somani Orient make Sqm 763

25

19075

24

21

Applying one coat industrial grade bitumen of penetration 2585 of approved quality using 170 kg per Sqm on Damp Proof Coarse after cleaning the surface with brushes and finally with a piece of cloth slightly soaked in kerosene oil Sqm 103

45

4635

22

Providing and Fixing 30 too 40 mm thickk stone chajjas in cement sand mortar 14 including making gola at junction with wall concrete M-15 grade (124 nominal mix drip course

20 mm thick plastering in CM 16 on both Sqm 645

35

22575

23

Providing and fixing steel gate grating and grills made of angles tees square bars flatsor black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide

Kg 83

9750

809250

24

Extra if squarerectangular hollow tubelar sections are used or grill made by flats only

Kg

10

6490

64251

P amp F bolts including nuts and bolts complete

Kg 57

240

13680

25

Painting with ready mix paint of approved brand and manufacture in all shades to give an even shade

New Steel Work Sqm 40

1500

60000

Welding by electric plant cmlength 286

15000

42900

TOTAL OF BSR WORKS CIVIL

3046100

25

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - B- SANITARY WORKS

SL No Specification Unit Rate QTY Amount

1

P amp F GI Pipes (External Work) with GI Fittings excluding union (IS 1239 Mark) including trenching amp refilling earth etc

40mm dia nominal bore A Class

Mtr 338

32 10816

25mm dia nominal bore A Class

Mtr 182

48 8736

2

Making connection of GI distribution Branch with GI main including all Fitting

Beyond 25mm amp upto 100mm dia Each 332 8 2656

3

P amp F Sand ndashcast Floor Trap (Nahni) of (IS1729 mark) of approved qualitymake with socket down or hinged grating including cutting and making good the floor- 100 x 100mm Each

421

4 1684

4

P amp F Gun-metal Full-way Valve (IS778 Mark) or wheel valve of approved make

Gun metal 25mm nominal bore Each 702 4 2808

Gun metal 40mm nominal bore Each 1065 4 4260

5

P amp F PVC Storage Tank ISI Marked (IS 12701) indicating the BIS license No) of approved make with cover 25mm dia 1M long GI over-flow pipe amp 25 Cm long wash out pipe with plug amp socket including making connection etc complete of approved design

1000 litres capacity Each 5437 4 21748

6

P amp F push cock superior quality of approved make

CP brass 15 mm

Each 416

16 6656

TOTAL 5936400

26

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - C-HOTICULTURE WORKS

SL No Specification Unit Rate QTY Amount

1

Supply of dry manure including loading unloading transportation amp stacking at site

Goat dungmanure

Cum

50000

35

17500

2

Supply amp Stacking good earth at site complete including loading unloading amp transportation etc Cum

7500

55

4125

3

Supply of different varities of treeshrubsclimbers according to height and age of the plant at site including loadingunloading amp transportation etc complete

Different flowing plants 900mm to 1500mm Each

1500

115

1725

4

Supply of different varities of bougainvillea in poly bagsearthen pots according to height growth amp age of plant at site including loadingunloading amp transportation etc complete

Local variety of bougainvillea 600 mm to 900mm Each

1500

75

1125

5

Digging pits in ordinary soil amp refilling the same with the excavated earth mixed with manure in the ratio 21 by volume (2 parts of stacked volume of earth after reduction by 20 1 parts of stacked volume of manure after reduction by 8) flooding with water and dressing including removal of surplus earth Each

1000

150

1500

27

(Cost of manure or extra good earth if needed to be paid separately) pit dia 60 cm X 60 cm deep

6

Spreading of manure and good earth in required thickness (cost of manure and good earth to be paid separately) Cum

400

75

300

TOTAL OF HORTICULTURE WORKS

26275

28

SCHEDULE OF QUANTITIES

Name of work Pushkar Market Street- Restoration And Development Works

(Based on item rates)

PART - D- NON SOR WORKS

SL No

Specification Unit Rate to

be Quoted

QTY

Amount

1

Providing and fixing fine dressed sand stoneapproved stone JALIas per existing matching geometrical design including moulding work with fine finishing fixing with thambli by proper adhesive and white cement with pigment including making groove etc complete in all respect

(b) 50mm thick Sqm 45

2

Providing amp fixing ashlar Rain water Spouts (3) lines dressed as per traditional practice existing design approved design size 60 x 30 x 25 cm fixing the rain water spout with lime surkhi mortar 12 with proper slope complete in all respect Each

12

3

Providing amp fixing ornamental stone cladding of approved sand stone with dressing complete as per existing designpatternapproved designfixing with 30mm thickgrinded lime surkhi mortar 12 amp pointing with white cement with araldite and pigment to match shade the stone complete in all respect as per direction of Engineer incharge(75mm thick) Sqm

54

4

Providing and fixing fine dressed sand stone Dasacoping as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect

(c) 75mm to 100mm thick with pan patti design Sqm 320

5

Providing and fixing fine dressed sand stone Cladding (Plain dressing only) as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect including removal of damaged cladding

(a) 50mm to 60mm thick Sqm 180

6

Supply and istallation whiteredapproved shade sandstone dustbin of size 800 mm x 450 mm and height 850 mm with hollow center to hang MS Dustbin of size 400mmx 500mmx 600 mm made of 1mm thick metal sheet fixed to stone pillars with MS chain edged with 50x50x5 mm angle sections including cutting welding and fabrication with priming coat of red oxide and approved ready mix paint of approved shadeStone peices joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 26

29

7

Supply and istallation of RedWhiteapproved shade stone bench of size 1500mmx450mmx450 mm horizontal stone members of size 300mmx400mmx450mm on two sides supporting the horizontal seating stone of 150 mm thickness fixed to vertical stone members joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 35

8

Poviding fixing testing and commisioning of Stainless Steel body bull Storage Capacity in (litres) 150 bull Nominal Cooling Capacity (Litreshr) 150 bull No Of Faucets 2 bull Dimensions 820W x 700D x 1235 H bull Normal Demand (glasses hr) 750 bull Refrigerant R-22 bull Current (Amps) 749 bull Water Overflow (Connections) 12 BSP bull Type Of Compressor Rotary Model No- SDLX15150A make Blue star or similar in make of VoltasOasis

Each 4

9

Providing fixing testing and commissioning of water purification system having auto shut-off e-boiling Voltage Stabilizer bull Type of Treatment- sediment filter active carbon cartridge mineral guard UV chamber bull water flow rate 3ltrminbull ultra- violet lamp of 16 watts bull power rating of 35watt bull Dimensions 355H x 1025D x 307WModel ndash Hi fio Make Eureka Forbes- aquagard or similar in make of livpurekent

Each 4

10

Demolishion of the existing bituminous road surface to a depth of 150 mm and disposal of demolished material with a lift upto 3 m and lead upto 1000 m

Sqm 50

11

Providing and fixing fine dressed sand stone flooring with white sand stone (Bansh paharpurdholpur stone) (panji marked surface) machine cut of approved shade set in pattern over 30mm thick base in cement mortar 16 including pointing with cement mortar 12 (1 cement2 stone dust) mixed with pigment to match the shade of stone with joint thickness upto 5 mm as per existing flloringsample approved by the consultantapproved by (75mm thick)

Sqm 730

12

Providing and Fixing Cobbles stone of lime sand stone size 100X100MM and theakness of 70 to100mm on path way open court yards of color shade approved by the consultant over cement mortar 13 ( 1 cement3 course sand) keeping 10mm joint between cobbles filled with cement mortar 13 ( 1 cement3 course sand) the mortar should remain recessed by 5mm from the top surface of the cobble stone complete in all respects as per design and details provided by the consultant

Sqm 1650

13

Supply and installation of sanstone signage 450x200 mm of redwhiteapproved shade Sandstone 75 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete with fixing with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 6

30

14

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 450mmx2400mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved with ornamentation in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

15

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 650mmx1200mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

16

Heritage signage shall be etched on to Dulmera stone plaque of size 18m x 14m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 4

17

Signage shall be etched on to Dulmera stone plaque of size 18m x 10m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 12

18

Providing and fixing MS steel sheets 3 mm thickness on to MS anfgles flats tees and hollow sections with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Kg 10640

19

Providing and fixing MS perforated sheets 3 mm thickness with diamondround shaped perforations as per sample approved by the consultant with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Sqm 90

20

Painting of shop signages with lettering in hindienglish and ornamental design patterns in ready mix paint of approved brand and manfacture in all shades to give an even shade as per drawings and details provided by the consultant

Sqm 560

21

Flush pointing over joints of dressed stone cladding chajjas jali etc with neat cement sand amp colour including racking the joints as per Jodhpur practice including all leads and lifts with grinded mortar of lime putty and stone powder mixed in 11 ratio and gur methi gugal etc are to be mixed as per old traditional practice

Sqm 75

22

Khamira Colour Washing as per old traditional practice to prepare the Khamira the lime should be slaked at least for 7-10 days and regularly it should be stirred by adding cured Gugal for non-synthetic colour adding gum (babool gum) as per specificationThen applying prepared solution on walls three to four thin coats as desired finishing

Sqm 1750

31

23

Providing amp applying Lime kara 12 (1lime cream 2 Zikki powder) grinding mortar with grinding millmanually on lime baseon all flat surface in two coatsFirst coat applying 3mm to 4mm thick and curing properly at least 7 dayssecond finishing coat done after 7days of previous coat as per traditional practice(thickness not more than 6 mm)

Sqm 155

TOTAL OF NON SOR WORKS

24

21

Applying one coat industrial grade bitumen of penetration 2585 of approved quality using 170 kg per Sqm on Damp Proof Coarse after cleaning the surface with brushes and finally with a piece of cloth slightly soaked in kerosene oil Sqm 103

45

4635

22

Providing and Fixing 30 too 40 mm thickk stone chajjas in cement sand mortar 14 including making gola at junction with wall concrete M-15 grade (124 nominal mix drip course

20 mm thick plastering in CM 16 on both Sqm 645

35

22575

23

Providing and fixing steel gate grating and grills made of angles tees square bars flatsor black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide

Kg 83

9750

809250

24

Extra if squarerectangular hollow tubelar sections are used or grill made by flats only

Kg

10

6490

64251

P amp F bolts including nuts and bolts complete

Kg 57

240

13680

25

Painting with ready mix paint of approved brand and manufacture in all shades to give an even shade

New Steel Work Sqm 40

1500

60000

Welding by electric plant cmlength 286

15000

42900

TOTAL OF BSR WORKS CIVIL

3046100

25

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - B- SANITARY WORKS

SL No Specification Unit Rate QTY Amount

1

P amp F GI Pipes (External Work) with GI Fittings excluding union (IS 1239 Mark) including trenching amp refilling earth etc

40mm dia nominal bore A Class

Mtr 338

32 10816

25mm dia nominal bore A Class

Mtr 182

48 8736

2

Making connection of GI distribution Branch with GI main including all Fitting

Beyond 25mm amp upto 100mm dia Each 332 8 2656

3

P amp F Sand ndashcast Floor Trap (Nahni) of (IS1729 mark) of approved qualitymake with socket down or hinged grating including cutting and making good the floor- 100 x 100mm Each

421

4 1684

4

P amp F Gun-metal Full-way Valve (IS778 Mark) or wheel valve of approved make

Gun metal 25mm nominal bore Each 702 4 2808

Gun metal 40mm nominal bore Each 1065 4 4260

5

P amp F PVC Storage Tank ISI Marked (IS 12701) indicating the BIS license No) of approved make with cover 25mm dia 1M long GI over-flow pipe amp 25 Cm long wash out pipe with plug amp socket including making connection etc complete of approved design

1000 litres capacity Each 5437 4 21748

6

P amp F push cock superior quality of approved make

CP brass 15 mm

Each 416

16 6656

TOTAL 5936400

26

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - C-HOTICULTURE WORKS

SL No Specification Unit Rate QTY Amount

1

Supply of dry manure including loading unloading transportation amp stacking at site

Goat dungmanure

Cum

50000

35

17500

2

Supply amp Stacking good earth at site complete including loading unloading amp transportation etc Cum

7500

55

4125

3

Supply of different varities of treeshrubsclimbers according to height and age of the plant at site including loadingunloading amp transportation etc complete

Different flowing plants 900mm to 1500mm Each

1500

115

1725

4

Supply of different varities of bougainvillea in poly bagsearthen pots according to height growth amp age of plant at site including loadingunloading amp transportation etc complete

Local variety of bougainvillea 600 mm to 900mm Each

1500

75

1125

5

Digging pits in ordinary soil amp refilling the same with the excavated earth mixed with manure in the ratio 21 by volume (2 parts of stacked volume of earth after reduction by 20 1 parts of stacked volume of manure after reduction by 8) flooding with water and dressing including removal of surplus earth Each

1000

150

1500

27

(Cost of manure or extra good earth if needed to be paid separately) pit dia 60 cm X 60 cm deep

6

Spreading of manure and good earth in required thickness (cost of manure and good earth to be paid separately) Cum

400

75

300

TOTAL OF HORTICULTURE WORKS

26275

28

SCHEDULE OF QUANTITIES

Name of work Pushkar Market Street- Restoration And Development Works

(Based on item rates)

PART - D- NON SOR WORKS

SL No

Specification Unit Rate to

be Quoted

QTY

Amount

1

Providing and fixing fine dressed sand stoneapproved stone JALIas per existing matching geometrical design including moulding work with fine finishing fixing with thambli by proper adhesive and white cement with pigment including making groove etc complete in all respect

(b) 50mm thick Sqm 45

2

Providing amp fixing ashlar Rain water Spouts (3) lines dressed as per traditional practice existing design approved design size 60 x 30 x 25 cm fixing the rain water spout with lime surkhi mortar 12 with proper slope complete in all respect Each

12

3

Providing amp fixing ornamental stone cladding of approved sand stone with dressing complete as per existing designpatternapproved designfixing with 30mm thickgrinded lime surkhi mortar 12 amp pointing with white cement with araldite and pigment to match shade the stone complete in all respect as per direction of Engineer incharge(75mm thick) Sqm

54

4

Providing and fixing fine dressed sand stone Dasacoping as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect

(c) 75mm to 100mm thick with pan patti design Sqm 320

5

Providing and fixing fine dressed sand stone Cladding (Plain dressing only) as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect including removal of damaged cladding

(a) 50mm to 60mm thick Sqm 180

6

Supply and istallation whiteredapproved shade sandstone dustbin of size 800 mm x 450 mm and height 850 mm with hollow center to hang MS Dustbin of size 400mmx 500mmx 600 mm made of 1mm thick metal sheet fixed to stone pillars with MS chain edged with 50x50x5 mm angle sections including cutting welding and fabrication with priming coat of red oxide and approved ready mix paint of approved shadeStone peices joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 26

29

7

Supply and istallation of RedWhiteapproved shade stone bench of size 1500mmx450mmx450 mm horizontal stone members of size 300mmx400mmx450mm on two sides supporting the horizontal seating stone of 150 mm thickness fixed to vertical stone members joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 35

8

Poviding fixing testing and commisioning of Stainless Steel body bull Storage Capacity in (litres) 150 bull Nominal Cooling Capacity (Litreshr) 150 bull No Of Faucets 2 bull Dimensions 820W x 700D x 1235 H bull Normal Demand (glasses hr) 750 bull Refrigerant R-22 bull Current (Amps) 749 bull Water Overflow (Connections) 12 BSP bull Type Of Compressor Rotary Model No- SDLX15150A make Blue star or similar in make of VoltasOasis

Each 4

9

Providing fixing testing and commissioning of water purification system having auto shut-off e-boiling Voltage Stabilizer bull Type of Treatment- sediment filter active carbon cartridge mineral guard UV chamber bull water flow rate 3ltrminbull ultra- violet lamp of 16 watts bull power rating of 35watt bull Dimensions 355H x 1025D x 307WModel ndash Hi fio Make Eureka Forbes- aquagard or similar in make of livpurekent

Each 4

10

Demolishion of the existing bituminous road surface to a depth of 150 mm and disposal of demolished material with a lift upto 3 m and lead upto 1000 m

Sqm 50

11

Providing and fixing fine dressed sand stone flooring with white sand stone (Bansh paharpurdholpur stone) (panji marked surface) machine cut of approved shade set in pattern over 30mm thick base in cement mortar 16 including pointing with cement mortar 12 (1 cement2 stone dust) mixed with pigment to match the shade of stone with joint thickness upto 5 mm as per existing flloringsample approved by the consultantapproved by (75mm thick)

Sqm 730

12

Providing and Fixing Cobbles stone of lime sand stone size 100X100MM and theakness of 70 to100mm on path way open court yards of color shade approved by the consultant over cement mortar 13 ( 1 cement3 course sand) keeping 10mm joint between cobbles filled with cement mortar 13 ( 1 cement3 course sand) the mortar should remain recessed by 5mm from the top surface of the cobble stone complete in all respects as per design and details provided by the consultant

Sqm 1650

13

Supply and installation of sanstone signage 450x200 mm of redwhiteapproved shade Sandstone 75 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete with fixing with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 6

30

14

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 450mmx2400mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved with ornamentation in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

15

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 650mmx1200mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

16

Heritage signage shall be etched on to Dulmera stone plaque of size 18m x 14m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 4

17

Signage shall be etched on to Dulmera stone plaque of size 18m x 10m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 12

18

Providing and fixing MS steel sheets 3 mm thickness on to MS anfgles flats tees and hollow sections with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Kg 10640

19

Providing and fixing MS perforated sheets 3 mm thickness with diamondround shaped perforations as per sample approved by the consultant with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Sqm 90

20

Painting of shop signages with lettering in hindienglish and ornamental design patterns in ready mix paint of approved brand and manfacture in all shades to give an even shade as per drawings and details provided by the consultant

Sqm 560

21

Flush pointing over joints of dressed stone cladding chajjas jali etc with neat cement sand amp colour including racking the joints as per Jodhpur practice including all leads and lifts with grinded mortar of lime putty and stone powder mixed in 11 ratio and gur methi gugal etc are to be mixed as per old traditional practice

Sqm 75

22

Khamira Colour Washing as per old traditional practice to prepare the Khamira the lime should be slaked at least for 7-10 days and regularly it should be stirred by adding cured Gugal for non-synthetic colour adding gum (babool gum) as per specificationThen applying prepared solution on walls three to four thin coats as desired finishing

Sqm 1750

31

23

Providing amp applying Lime kara 12 (1lime cream 2 Zikki powder) grinding mortar with grinding millmanually on lime baseon all flat surface in two coatsFirst coat applying 3mm to 4mm thick and curing properly at least 7 dayssecond finishing coat done after 7days of previous coat as per traditional practice(thickness not more than 6 mm)

Sqm 155

TOTAL OF NON SOR WORKS

25

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - B- SANITARY WORKS

SL No Specification Unit Rate QTY Amount

1

P amp F GI Pipes (External Work) with GI Fittings excluding union (IS 1239 Mark) including trenching amp refilling earth etc

40mm dia nominal bore A Class

Mtr 338

32 10816

25mm dia nominal bore A Class

Mtr 182

48 8736

2

Making connection of GI distribution Branch with GI main including all Fitting

Beyond 25mm amp upto 100mm dia Each 332 8 2656

3

P amp F Sand ndashcast Floor Trap (Nahni) of (IS1729 mark) of approved qualitymake with socket down or hinged grating including cutting and making good the floor- 100 x 100mm Each

421

4 1684

4

P amp F Gun-metal Full-way Valve (IS778 Mark) or wheel valve of approved make

Gun metal 25mm nominal bore Each 702 4 2808

Gun metal 40mm nominal bore Each 1065 4 4260

5

P amp F PVC Storage Tank ISI Marked (IS 12701) indicating the BIS license No) of approved make with cover 25mm dia 1M long GI over-flow pipe amp 25 Cm long wash out pipe with plug amp socket including making connection etc complete of approved design

1000 litres capacity Each 5437 4 21748

6

P amp F push cock superior quality of approved make

CP brass 15 mm

Each 416

16 6656

TOTAL 5936400

26

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - C-HOTICULTURE WORKS

SL No Specification Unit Rate QTY Amount

1

Supply of dry manure including loading unloading transportation amp stacking at site

Goat dungmanure

Cum

50000

35

17500

2

Supply amp Stacking good earth at site complete including loading unloading amp transportation etc Cum

7500

55

4125

3

Supply of different varities of treeshrubsclimbers according to height and age of the plant at site including loadingunloading amp transportation etc complete

Different flowing plants 900mm to 1500mm Each

1500

115

1725

4

Supply of different varities of bougainvillea in poly bagsearthen pots according to height growth amp age of plant at site including loadingunloading amp transportation etc complete

Local variety of bougainvillea 600 mm to 900mm Each

1500

75

1125

5

Digging pits in ordinary soil amp refilling the same with the excavated earth mixed with manure in the ratio 21 by volume (2 parts of stacked volume of earth after reduction by 20 1 parts of stacked volume of manure after reduction by 8) flooding with water and dressing including removal of surplus earth Each

1000

150

1500

27

(Cost of manure or extra good earth if needed to be paid separately) pit dia 60 cm X 60 cm deep

6

Spreading of manure and good earth in required thickness (cost of manure and good earth to be paid separately) Cum

400

75

300

TOTAL OF HORTICULTURE WORKS

26275

28

SCHEDULE OF QUANTITIES

Name of work Pushkar Market Street- Restoration And Development Works

(Based on item rates)

PART - D- NON SOR WORKS

SL No

Specification Unit Rate to

be Quoted

QTY

Amount

1

Providing and fixing fine dressed sand stoneapproved stone JALIas per existing matching geometrical design including moulding work with fine finishing fixing with thambli by proper adhesive and white cement with pigment including making groove etc complete in all respect

(b) 50mm thick Sqm 45

2

Providing amp fixing ashlar Rain water Spouts (3) lines dressed as per traditional practice existing design approved design size 60 x 30 x 25 cm fixing the rain water spout with lime surkhi mortar 12 with proper slope complete in all respect Each

12

3

Providing amp fixing ornamental stone cladding of approved sand stone with dressing complete as per existing designpatternapproved designfixing with 30mm thickgrinded lime surkhi mortar 12 amp pointing with white cement with araldite and pigment to match shade the stone complete in all respect as per direction of Engineer incharge(75mm thick) Sqm

54

4

Providing and fixing fine dressed sand stone Dasacoping as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect

(c) 75mm to 100mm thick with pan patti design Sqm 320

5

Providing and fixing fine dressed sand stone Cladding (Plain dressing only) as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect including removal of damaged cladding

(a) 50mm to 60mm thick Sqm 180

6

Supply and istallation whiteredapproved shade sandstone dustbin of size 800 mm x 450 mm and height 850 mm with hollow center to hang MS Dustbin of size 400mmx 500mmx 600 mm made of 1mm thick metal sheet fixed to stone pillars with MS chain edged with 50x50x5 mm angle sections including cutting welding and fabrication with priming coat of red oxide and approved ready mix paint of approved shadeStone peices joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 26

29

7

Supply and istallation of RedWhiteapproved shade stone bench of size 1500mmx450mmx450 mm horizontal stone members of size 300mmx400mmx450mm on two sides supporting the horizontal seating stone of 150 mm thickness fixed to vertical stone members joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 35

8

Poviding fixing testing and commisioning of Stainless Steel body bull Storage Capacity in (litres) 150 bull Nominal Cooling Capacity (Litreshr) 150 bull No Of Faucets 2 bull Dimensions 820W x 700D x 1235 H bull Normal Demand (glasses hr) 750 bull Refrigerant R-22 bull Current (Amps) 749 bull Water Overflow (Connections) 12 BSP bull Type Of Compressor Rotary Model No- SDLX15150A make Blue star or similar in make of VoltasOasis

Each 4

9

Providing fixing testing and commissioning of water purification system having auto shut-off e-boiling Voltage Stabilizer bull Type of Treatment- sediment filter active carbon cartridge mineral guard UV chamber bull water flow rate 3ltrminbull ultra- violet lamp of 16 watts bull power rating of 35watt bull Dimensions 355H x 1025D x 307WModel ndash Hi fio Make Eureka Forbes- aquagard or similar in make of livpurekent

Each 4

10

Demolishion of the existing bituminous road surface to a depth of 150 mm and disposal of demolished material with a lift upto 3 m and lead upto 1000 m

Sqm 50

11

Providing and fixing fine dressed sand stone flooring with white sand stone (Bansh paharpurdholpur stone) (panji marked surface) machine cut of approved shade set in pattern over 30mm thick base in cement mortar 16 including pointing with cement mortar 12 (1 cement2 stone dust) mixed with pigment to match the shade of stone with joint thickness upto 5 mm as per existing flloringsample approved by the consultantapproved by (75mm thick)

Sqm 730

12

Providing and Fixing Cobbles stone of lime sand stone size 100X100MM and theakness of 70 to100mm on path way open court yards of color shade approved by the consultant over cement mortar 13 ( 1 cement3 course sand) keeping 10mm joint between cobbles filled with cement mortar 13 ( 1 cement3 course sand) the mortar should remain recessed by 5mm from the top surface of the cobble stone complete in all respects as per design and details provided by the consultant

Sqm 1650

13

Supply and installation of sanstone signage 450x200 mm of redwhiteapproved shade Sandstone 75 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete with fixing with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 6

30

14

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 450mmx2400mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved with ornamentation in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

15

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 650mmx1200mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

16

Heritage signage shall be etched on to Dulmera stone plaque of size 18m x 14m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 4

17

Signage shall be etched on to Dulmera stone plaque of size 18m x 10m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 12

18

Providing and fixing MS steel sheets 3 mm thickness on to MS anfgles flats tees and hollow sections with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Kg 10640

19

Providing and fixing MS perforated sheets 3 mm thickness with diamondround shaped perforations as per sample approved by the consultant with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Sqm 90

20

Painting of shop signages with lettering in hindienglish and ornamental design patterns in ready mix paint of approved brand and manfacture in all shades to give an even shade as per drawings and details provided by the consultant

Sqm 560

21

Flush pointing over joints of dressed stone cladding chajjas jali etc with neat cement sand amp colour including racking the joints as per Jodhpur practice including all leads and lifts with grinded mortar of lime putty and stone powder mixed in 11 ratio and gur methi gugal etc are to be mixed as per old traditional practice

Sqm 75

22

Khamira Colour Washing as per old traditional practice to prepare the Khamira the lime should be slaked at least for 7-10 days and regularly it should be stirred by adding cured Gugal for non-synthetic colour adding gum (babool gum) as per specificationThen applying prepared solution on walls three to four thin coats as desired finishing

Sqm 1750

31

23

Providing amp applying Lime kara 12 (1lime cream 2 Zikki powder) grinding mortar with grinding millmanually on lime baseon all flat surface in two coatsFirst coat applying 3mm to 4mm thick and curing properly at least 7 dayssecond finishing coat done after 7days of previous coat as per traditional practice(thickness not more than 6 mm)

Sqm 155

TOTAL OF NON SOR WORKS

26

SCHEDULE OF QUANTITIES

Rajasthan Tourism Development Corporation

Name of work Pushkar Market Street- Restoration And Development Works (Based on PWD BSR Ajmer Circle - 2013)

PART - C-HOTICULTURE WORKS

SL No Specification Unit Rate QTY Amount

1

Supply of dry manure including loading unloading transportation amp stacking at site

Goat dungmanure

Cum

50000

35

17500

2

Supply amp Stacking good earth at site complete including loading unloading amp transportation etc Cum

7500

55

4125

3

Supply of different varities of treeshrubsclimbers according to height and age of the plant at site including loadingunloading amp transportation etc complete

Different flowing plants 900mm to 1500mm Each

1500

115

1725

4

Supply of different varities of bougainvillea in poly bagsearthen pots according to height growth amp age of plant at site including loadingunloading amp transportation etc complete

Local variety of bougainvillea 600 mm to 900mm Each

1500

75

1125

5

Digging pits in ordinary soil amp refilling the same with the excavated earth mixed with manure in the ratio 21 by volume (2 parts of stacked volume of earth after reduction by 20 1 parts of stacked volume of manure after reduction by 8) flooding with water and dressing including removal of surplus earth Each

1000

150

1500

27

(Cost of manure or extra good earth if needed to be paid separately) pit dia 60 cm X 60 cm deep

6

Spreading of manure and good earth in required thickness (cost of manure and good earth to be paid separately) Cum

400

75

300

TOTAL OF HORTICULTURE WORKS

26275

28

SCHEDULE OF QUANTITIES

Name of work Pushkar Market Street- Restoration And Development Works

(Based on item rates)

PART - D- NON SOR WORKS

SL No

Specification Unit Rate to

be Quoted

QTY

Amount

1

Providing and fixing fine dressed sand stoneapproved stone JALIas per existing matching geometrical design including moulding work with fine finishing fixing with thambli by proper adhesive and white cement with pigment including making groove etc complete in all respect

(b) 50mm thick Sqm 45

2

Providing amp fixing ashlar Rain water Spouts (3) lines dressed as per traditional practice existing design approved design size 60 x 30 x 25 cm fixing the rain water spout with lime surkhi mortar 12 with proper slope complete in all respect Each

12

3

Providing amp fixing ornamental stone cladding of approved sand stone with dressing complete as per existing designpatternapproved designfixing with 30mm thickgrinded lime surkhi mortar 12 amp pointing with white cement with araldite and pigment to match shade the stone complete in all respect as per direction of Engineer incharge(75mm thick) Sqm

54

4

Providing and fixing fine dressed sand stone Dasacoping as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect

(c) 75mm to 100mm thick with pan patti design Sqm 320

5

Providing and fixing fine dressed sand stone Cladding (Plain dressing only) as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect including removal of damaged cladding

(a) 50mm to 60mm thick Sqm 180

6

Supply and istallation whiteredapproved shade sandstone dustbin of size 800 mm x 450 mm and height 850 mm with hollow center to hang MS Dustbin of size 400mmx 500mmx 600 mm made of 1mm thick metal sheet fixed to stone pillars with MS chain edged with 50x50x5 mm angle sections including cutting welding and fabrication with priming coat of red oxide and approved ready mix paint of approved shadeStone peices joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 26

29

7

Supply and istallation of RedWhiteapproved shade stone bench of size 1500mmx450mmx450 mm horizontal stone members of size 300mmx400mmx450mm on two sides supporting the horizontal seating stone of 150 mm thickness fixed to vertical stone members joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 35

8

Poviding fixing testing and commisioning of Stainless Steel body bull Storage Capacity in (litres) 150 bull Nominal Cooling Capacity (Litreshr) 150 bull No Of Faucets 2 bull Dimensions 820W x 700D x 1235 H bull Normal Demand (glasses hr) 750 bull Refrigerant R-22 bull Current (Amps) 749 bull Water Overflow (Connections) 12 BSP bull Type Of Compressor Rotary Model No- SDLX15150A make Blue star or similar in make of VoltasOasis

Each 4

9

Providing fixing testing and commissioning of water purification system having auto shut-off e-boiling Voltage Stabilizer bull Type of Treatment- sediment filter active carbon cartridge mineral guard UV chamber bull water flow rate 3ltrminbull ultra- violet lamp of 16 watts bull power rating of 35watt bull Dimensions 355H x 1025D x 307WModel ndash Hi fio Make Eureka Forbes- aquagard or similar in make of livpurekent

Each 4

10

Demolishion of the existing bituminous road surface to a depth of 150 mm and disposal of demolished material with a lift upto 3 m and lead upto 1000 m

Sqm 50

11

Providing and fixing fine dressed sand stone flooring with white sand stone (Bansh paharpurdholpur stone) (panji marked surface) machine cut of approved shade set in pattern over 30mm thick base in cement mortar 16 including pointing with cement mortar 12 (1 cement2 stone dust) mixed with pigment to match the shade of stone with joint thickness upto 5 mm as per existing flloringsample approved by the consultantapproved by (75mm thick)

Sqm 730

12

Providing and Fixing Cobbles stone of lime sand stone size 100X100MM and theakness of 70 to100mm on path way open court yards of color shade approved by the consultant over cement mortar 13 ( 1 cement3 course sand) keeping 10mm joint between cobbles filled with cement mortar 13 ( 1 cement3 course sand) the mortar should remain recessed by 5mm from the top surface of the cobble stone complete in all respects as per design and details provided by the consultant

Sqm 1650

13

Supply and installation of sanstone signage 450x200 mm of redwhiteapproved shade Sandstone 75 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete with fixing with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 6

30

14

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 450mmx2400mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved with ornamentation in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

15

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 650mmx1200mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

16

Heritage signage shall be etched on to Dulmera stone plaque of size 18m x 14m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 4

17

Signage shall be etched on to Dulmera stone plaque of size 18m x 10m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 12

18

Providing and fixing MS steel sheets 3 mm thickness on to MS anfgles flats tees and hollow sections with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Kg 10640

19

Providing and fixing MS perforated sheets 3 mm thickness with diamondround shaped perforations as per sample approved by the consultant with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Sqm 90

20

Painting of shop signages with lettering in hindienglish and ornamental design patterns in ready mix paint of approved brand and manfacture in all shades to give an even shade as per drawings and details provided by the consultant

Sqm 560

21

Flush pointing over joints of dressed stone cladding chajjas jali etc with neat cement sand amp colour including racking the joints as per Jodhpur practice including all leads and lifts with grinded mortar of lime putty and stone powder mixed in 11 ratio and gur methi gugal etc are to be mixed as per old traditional practice

Sqm 75

22

Khamira Colour Washing as per old traditional practice to prepare the Khamira the lime should be slaked at least for 7-10 days and regularly it should be stirred by adding cured Gugal for non-synthetic colour adding gum (babool gum) as per specificationThen applying prepared solution on walls three to four thin coats as desired finishing

Sqm 1750

31

23

Providing amp applying Lime kara 12 (1lime cream 2 Zikki powder) grinding mortar with grinding millmanually on lime baseon all flat surface in two coatsFirst coat applying 3mm to 4mm thick and curing properly at least 7 dayssecond finishing coat done after 7days of previous coat as per traditional practice(thickness not more than 6 mm)

Sqm 155

TOTAL OF NON SOR WORKS

27

(Cost of manure or extra good earth if needed to be paid separately) pit dia 60 cm X 60 cm deep

6

Spreading of manure and good earth in required thickness (cost of manure and good earth to be paid separately) Cum

400

75

300

TOTAL OF HORTICULTURE WORKS

26275

28

SCHEDULE OF QUANTITIES

Name of work Pushkar Market Street- Restoration And Development Works

(Based on item rates)

PART - D- NON SOR WORKS

SL No

Specification Unit Rate to

be Quoted

QTY

Amount

1

Providing and fixing fine dressed sand stoneapproved stone JALIas per existing matching geometrical design including moulding work with fine finishing fixing with thambli by proper adhesive and white cement with pigment including making groove etc complete in all respect

(b) 50mm thick Sqm 45

2

Providing amp fixing ashlar Rain water Spouts (3) lines dressed as per traditional practice existing design approved design size 60 x 30 x 25 cm fixing the rain water spout with lime surkhi mortar 12 with proper slope complete in all respect Each

12

3

Providing amp fixing ornamental stone cladding of approved sand stone with dressing complete as per existing designpatternapproved designfixing with 30mm thickgrinded lime surkhi mortar 12 amp pointing with white cement with araldite and pigment to match shade the stone complete in all respect as per direction of Engineer incharge(75mm thick) Sqm

54

4

Providing and fixing fine dressed sand stone Dasacoping as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect

(c) 75mm to 100mm thick with pan patti design Sqm 320

5

Providing and fixing fine dressed sand stone Cladding (Plain dressing only) as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect including removal of damaged cladding

(a) 50mm to 60mm thick Sqm 180

6

Supply and istallation whiteredapproved shade sandstone dustbin of size 800 mm x 450 mm and height 850 mm with hollow center to hang MS Dustbin of size 400mmx 500mmx 600 mm made of 1mm thick metal sheet fixed to stone pillars with MS chain edged with 50x50x5 mm angle sections including cutting welding and fabrication with priming coat of red oxide and approved ready mix paint of approved shadeStone peices joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 26

29

7

Supply and istallation of RedWhiteapproved shade stone bench of size 1500mmx450mmx450 mm horizontal stone members of size 300mmx400mmx450mm on two sides supporting the horizontal seating stone of 150 mm thickness fixed to vertical stone members joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 35

8

Poviding fixing testing and commisioning of Stainless Steel body bull Storage Capacity in (litres) 150 bull Nominal Cooling Capacity (Litreshr) 150 bull No Of Faucets 2 bull Dimensions 820W x 700D x 1235 H bull Normal Demand (glasses hr) 750 bull Refrigerant R-22 bull Current (Amps) 749 bull Water Overflow (Connections) 12 BSP bull Type Of Compressor Rotary Model No- SDLX15150A make Blue star or similar in make of VoltasOasis

Each 4

9

Providing fixing testing and commissioning of water purification system having auto shut-off e-boiling Voltage Stabilizer bull Type of Treatment- sediment filter active carbon cartridge mineral guard UV chamber bull water flow rate 3ltrminbull ultra- violet lamp of 16 watts bull power rating of 35watt bull Dimensions 355H x 1025D x 307WModel ndash Hi fio Make Eureka Forbes- aquagard or similar in make of livpurekent

Each 4

10

Demolishion of the existing bituminous road surface to a depth of 150 mm and disposal of demolished material with a lift upto 3 m and lead upto 1000 m

Sqm 50

11

Providing and fixing fine dressed sand stone flooring with white sand stone (Bansh paharpurdholpur stone) (panji marked surface) machine cut of approved shade set in pattern over 30mm thick base in cement mortar 16 including pointing with cement mortar 12 (1 cement2 stone dust) mixed with pigment to match the shade of stone with joint thickness upto 5 mm as per existing flloringsample approved by the consultantapproved by (75mm thick)

Sqm 730

12

Providing and Fixing Cobbles stone of lime sand stone size 100X100MM and theakness of 70 to100mm on path way open court yards of color shade approved by the consultant over cement mortar 13 ( 1 cement3 course sand) keeping 10mm joint between cobbles filled with cement mortar 13 ( 1 cement3 course sand) the mortar should remain recessed by 5mm from the top surface of the cobble stone complete in all respects as per design and details provided by the consultant

Sqm 1650

13

Supply and installation of sanstone signage 450x200 mm of redwhiteapproved shade Sandstone 75 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete with fixing with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 6

30

14

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 450mmx2400mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved with ornamentation in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

15

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 650mmx1200mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

16

Heritage signage shall be etched on to Dulmera stone plaque of size 18m x 14m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 4

17

Signage shall be etched on to Dulmera stone plaque of size 18m x 10m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 12

18

Providing and fixing MS steel sheets 3 mm thickness on to MS anfgles flats tees and hollow sections with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Kg 10640

19

Providing and fixing MS perforated sheets 3 mm thickness with diamondround shaped perforations as per sample approved by the consultant with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Sqm 90

20

Painting of shop signages with lettering in hindienglish and ornamental design patterns in ready mix paint of approved brand and manfacture in all shades to give an even shade as per drawings and details provided by the consultant

Sqm 560

21

Flush pointing over joints of dressed stone cladding chajjas jali etc with neat cement sand amp colour including racking the joints as per Jodhpur practice including all leads and lifts with grinded mortar of lime putty and stone powder mixed in 11 ratio and gur methi gugal etc are to be mixed as per old traditional practice

Sqm 75

22

Khamira Colour Washing as per old traditional practice to prepare the Khamira the lime should be slaked at least for 7-10 days and regularly it should be stirred by adding cured Gugal for non-synthetic colour adding gum (babool gum) as per specificationThen applying prepared solution on walls three to four thin coats as desired finishing

Sqm 1750

31

23

Providing amp applying Lime kara 12 (1lime cream 2 Zikki powder) grinding mortar with grinding millmanually on lime baseon all flat surface in two coatsFirst coat applying 3mm to 4mm thick and curing properly at least 7 dayssecond finishing coat done after 7days of previous coat as per traditional practice(thickness not more than 6 mm)

Sqm 155

TOTAL OF NON SOR WORKS

28

SCHEDULE OF QUANTITIES

Name of work Pushkar Market Street- Restoration And Development Works

(Based on item rates)

PART - D- NON SOR WORKS

SL No

Specification Unit Rate to

be Quoted

QTY

Amount

1

Providing and fixing fine dressed sand stoneapproved stone JALIas per existing matching geometrical design including moulding work with fine finishing fixing with thambli by proper adhesive and white cement with pigment including making groove etc complete in all respect

(b) 50mm thick Sqm 45

2

Providing amp fixing ashlar Rain water Spouts (3) lines dressed as per traditional practice existing design approved design size 60 x 30 x 25 cm fixing the rain water spout with lime surkhi mortar 12 with proper slope complete in all respect Each

12

3

Providing amp fixing ornamental stone cladding of approved sand stone with dressing complete as per existing designpatternapproved designfixing with 30mm thickgrinded lime surkhi mortar 12 amp pointing with white cement with araldite and pigment to match shade the stone complete in all respect as per direction of Engineer incharge(75mm thick) Sqm

54

4

Providing and fixing fine dressed sand stone Dasacoping as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect

(c) 75mm to 100mm thick with pan patti design Sqm 320

5

Providing and fixing fine dressed sand stone Cladding (Plain dressing only) as per existing matching fixing in grinded lime surkhi mortar 12 including pointing in cream and stone powder 11 with an admixture of pigment to match the shade of stone complete in all respect including removal of damaged cladding

(a) 50mm to 60mm thick Sqm 180

6

Supply and istallation whiteredapproved shade sandstone dustbin of size 800 mm x 450 mm and height 850 mm with hollow center to hang MS Dustbin of size 400mmx 500mmx 600 mm made of 1mm thick metal sheet fixed to stone pillars with MS chain edged with 50x50x5 mm angle sections including cutting welding and fabrication with priming coat of red oxide and approved ready mix paint of approved shadeStone peices joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 26

29

7

Supply and istallation of RedWhiteapproved shade stone bench of size 1500mmx450mmx450 mm horizontal stone members of size 300mmx400mmx450mm on two sides supporting the horizontal seating stone of 150 mm thickness fixed to vertical stone members joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 35

8

Poviding fixing testing and commisioning of Stainless Steel body bull Storage Capacity in (litres) 150 bull Nominal Cooling Capacity (Litreshr) 150 bull No Of Faucets 2 bull Dimensions 820W x 700D x 1235 H bull Normal Demand (glasses hr) 750 bull Refrigerant R-22 bull Current (Amps) 749 bull Water Overflow (Connections) 12 BSP bull Type Of Compressor Rotary Model No- SDLX15150A make Blue star or similar in make of VoltasOasis

Each 4

9

Providing fixing testing and commissioning of water purification system having auto shut-off e-boiling Voltage Stabilizer bull Type of Treatment- sediment filter active carbon cartridge mineral guard UV chamber bull water flow rate 3ltrminbull ultra- violet lamp of 16 watts bull power rating of 35watt bull Dimensions 355H x 1025D x 307WModel ndash Hi fio Make Eureka Forbes- aquagard or similar in make of livpurekent

Each 4

10

Demolishion of the existing bituminous road surface to a depth of 150 mm and disposal of demolished material with a lift upto 3 m and lead upto 1000 m

Sqm 50

11

Providing and fixing fine dressed sand stone flooring with white sand stone (Bansh paharpurdholpur stone) (panji marked surface) machine cut of approved shade set in pattern over 30mm thick base in cement mortar 16 including pointing with cement mortar 12 (1 cement2 stone dust) mixed with pigment to match the shade of stone with joint thickness upto 5 mm as per existing flloringsample approved by the consultantapproved by (75mm thick)

Sqm 730

12

Providing and Fixing Cobbles stone of lime sand stone size 100X100MM and theakness of 70 to100mm on path way open court yards of color shade approved by the consultant over cement mortar 13 ( 1 cement3 course sand) keeping 10mm joint between cobbles filled with cement mortar 13 ( 1 cement3 course sand) the mortar should remain recessed by 5mm from the top surface of the cobble stone complete in all respects as per design and details provided by the consultant

Sqm 1650

13

Supply and installation of sanstone signage 450x200 mm of redwhiteapproved shade Sandstone 75 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete with fixing with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 6

30

14

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 450mmx2400mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved with ornamentation in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

15

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 650mmx1200mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

16

Heritage signage shall be etched on to Dulmera stone plaque of size 18m x 14m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 4

17

Signage shall be etched on to Dulmera stone plaque of size 18m x 10m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 12

18

Providing and fixing MS steel sheets 3 mm thickness on to MS anfgles flats tees and hollow sections with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Kg 10640

19

Providing and fixing MS perforated sheets 3 mm thickness with diamondround shaped perforations as per sample approved by the consultant with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Sqm 90

20

Painting of shop signages with lettering in hindienglish and ornamental design patterns in ready mix paint of approved brand and manfacture in all shades to give an even shade as per drawings and details provided by the consultant

Sqm 560

21

Flush pointing over joints of dressed stone cladding chajjas jali etc with neat cement sand amp colour including racking the joints as per Jodhpur practice including all leads and lifts with grinded mortar of lime putty and stone powder mixed in 11 ratio and gur methi gugal etc are to be mixed as per old traditional practice

Sqm 75

22

Khamira Colour Washing as per old traditional practice to prepare the Khamira the lime should be slaked at least for 7-10 days and regularly it should be stirred by adding cured Gugal for non-synthetic colour adding gum (babool gum) as per specificationThen applying prepared solution on walls three to four thin coats as desired finishing

Sqm 1750

31

23

Providing amp applying Lime kara 12 (1lime cream 2 Zikki powder) grinding mortar with grinding millmanually on lime baseon all flat surface in two coatsFirst coat applying 3mm to 4mm thick and curing properly at least 7 dayssecond finishing coat done after 7days of previous coat as per traditional practice(thickness not more than 6 mm)

Sqm 155

TOTAL OF NON SOR WORKS

29

7

Supply and istallation of RedWhiteapproved shade stone bench of size 1500mmx450mmx450 mm horizontal stone members of size 300mmx400mmx450mm on two sides supporting the horizontal seating stone of 150 mm thickness fixed to vertical stone members joined with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 35

8

Poviding fixing testing and commisioning of Stainless Steel body bull Storage Capacity in (litres) 150 bull Nominal Cooling Capacity (Litreshr) 150 bull No Of Faucets 2 bull Dimensions 820W x 700D x 1235 H bull Normal Demand (glasses hr) 750 bull Refrigerant R-22 bull Current (Amps) 749 bull Water Overflow (Connections) 12 BSP bull Type Of Compressor Rotary Model No- SDLX15150A make Blue star or similar in make of VoltasOasis

Each 4

9

Providing fixing testing and commissioning of water purification system having auto shut-off e-boiling Voltage Stabilizer bull Type of Treatment- sediment filter active carbon cartridge mineral guard UV chamber bull water flow rate 3ltrminbull ultra- violet lamp of 16 watts bull power rating of 35watt bull Dimensions 355H x 1025D x 307WModel ndash Hi fio Make Eureka Forbes- aquagard or similar in make of livpurekent

Each 4

10

Demolishion of the existing bituminous road surface to a depth of 150 mm and disposal of demolished material with a lift upto 3 m and lead upto 1000 m

Sqm 50

11

Providing and fixing fine dressed sand stone flooring with white sand stone (Bansh paharpurdholpur stone) (panji marked surface) machine cut of approved shade set in pattern over 30mm thick base in cement mortar 16 including pointing with cement mortar 12 (1 cement2 stone dust) mixed with pigment to match the shade of stone with joint thickness upto 5 mm as per existing flloringsample approved by the consultantapproved by (75mm thick)

Sqm 730

12

Providing and Fixing Cobbles stone of lime sand stone size 100X100MM and theakness of 70 to100mm on path way open court yards of color shade approved by the consultant over cement mortar 13 ( 1 cement3 course sand) keeping 10mm joint between cobbles filled with cement mortar 13 ( 1 cement3 course sand) the mortar should remain recessed by 5mm from the top surface of the cobble stone complete in all respects as per design and details provided by the consultant

Sqm 1650

13

Supply and installation of sanstone signage 450x200 mm of redwhiteapproved shade Sandstone 75 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete with fixing with proper adhesive clips complete in all respect as per drawings and specifications provided by the consultant

Each 6

30

14

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 450mmx2400mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved with ornamentation in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

15

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 650mmx1200mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

16

Heritage signage shall be etched on to Dulmera stone plaque of size 18m x 14m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 4

17

Signage shall be etched on to Dulmera stone plaque of size 18m x 10m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 12

18

Providing and fixing MS steel sheets 3 mm thickness on to MS anfgles flats tees and hollow sections with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Kg 10640

19

Providing and fixing MS perforated sheets 3 mm thickness with diamondround shaped perforations as per sample approved by the consultant with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Sqm 90

20

Painting of shop signages with lettering in hindienglish and ornamental design patterns in ready mix paint of approved brand and manfacture in all shades to give an even shade as per drawings and details provided by the consultant

Sqm 560

21

Flush pointing over joints of dressed stone cladding chajjas jali etc with neat cement sand amp colour including racking the joints as per Jodhpur practice including all leads and lifts with grinded mortar of lime putty and stone powder mixed in 11 ratio and gur methi gugal etc are to be mixed as per old traditional practice

Sqm 75

22

Khamira Colour Washing as per old traditional practice to prepare the Khamira the lime should be slaked at least for 7-10 days and regularly it should be stirred by adding cured Gugal for non-synthetic colour adding gum (babool gum) as per specificationThen applying prepared solution on walls three to four thin coats as desired finishing

Sqm 1750

31

23

Providing amp applying Lime kara 12 (1lime cream 2 Zikki powder) grinding mortar with grinding millmanually on lime baseon all flat surface in two coatsFirst coat applying 3mm to 4mm thick and curing properly at least 7 dayssecond finishing coat done after 7days of previous coat as per traditional practice(thickness not more than 6 mm)

Sqm 155

TOTAL OF NON SOR WORKS

30

14

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 450mmx2400mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved with ornamentation in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

15

Supply and istallation of sanstone signage of redwhiteapproved shade Sandstone 650mmx1200mm and 150 mm thick inserted in horizontal stone of size 900mmx 450 mmx 150 mm embeded in M15 cement concrete of 150 mm thick with text ( english amp hindi) and patternslogoartwork chiseledengarved in 5-8 mm deep grove complete in all respect as per drawings and specifications provided by the consultant

Each 14

16

Heritage signage shall be etched on to Dulmera stone plaque of size 18m x 14m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 4

17

Signage shall be etched on to Dulmera stone plaque of size 18m x 10m held on to 1500 high stone brick masonry tapered pedestal as per design including excavation stone brick masonry finishing etching and painting printing along with maps etc complete

Each 12

18

Providing and fixing MS steel sheets 3 mm thickness on to MS anfgles flats tees and hollow sections with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Kg 10640

19

Providing and fixing MS perforated sheets 3 mm thickness with diamondround shaped perforations as per sample approved by the consultant with all fittings complete as per design and drawings including cutting welding and fabrication with priming coat of red oxide

Sqm 90

20

Painting of shop signages with lettering in hindienglish and ornamental design patterns in ready mix paint of approved brand and manfacture in all shades to give an even shade as per drawings and details provided by the consultant

Sqm 560

21

Flush pointing over joints of dressed stone cladding chajjas jali etc with neat cement sand amp colour including racking the joints as per Jodhpur practice including all leads and lifts with grinded mortar of lime putty and stone powder mixed in 11 ratio and gur methi gugal etc are to be mixed as per old traditional practice

Sqm 75

22

Khamira Colour Washing as per old traditional practice to prepare the Khamira the lime should be slaked at least for 7-10 days and regularly it should be stirred by adding cured Gugal for non-synthetic colour adding gum (babool gum) as per specificationThen applying prepared solution on walls three to four thin coats as desired finishing

Sqm 1750

31

23

Providing amp applying Lime kara 12 (1lime cream 2 Zikki powder) grinding mortar with grinding millmanually on lime baseon all flat surface in two coatsFirst coat applying 3mm to 4mm thick and curing properly at least 7 dayssecond finishing coat done after 7days of previous coat as per traditional practice(thickness not more than 6 mm)

Sqm 155

TOTAL OF NON SOR WORKS

31

23

Providing amp applying Lime kara 12 (1lime cream 2 Zikki powder) grinding mortar with grinding millmanually on lime baseon all flat surface in two coatsFirst coat applying 3mm to 4mm thick and curing properly at least 7 dayssecond finishing coat done after 7days of previous coat as per traditional practice(thickness not more than 6 mm)

Sqm 155

TOTAL OF NON SOR WORKS