HYDRAULIC TRACK DRILL

®

R30C HYDRA-TRAC®

2 Copyright 200x Terex Corporation

MoRe ReaCh. MoRe PRofit. The industry-leading pattern-coverage capabilities of the new Terex® Reedrill R30C result in significant cost and time savings for your drilling operation. With the new R30C’s ability to drill three and even four holes per set-up before having to tram and reposition, operators can reach drilling deadlines much faster. This translates into greater profit.

More reach is achieved thanks to the 5 foot (1,524 mm) boom. The boom and the swing radius provides huge pattern-coverage, twice the coverage of other drills in the industry.

2

R30C Drilling Coverage (7x8) R30C Drilling Coverage (8x9)

Copyright 200x Terex Corporation 3 3

the R30C features many improvements for increased comfort, convenience, and outstanding performance.the industry’s only field serviceable Rock Drills.The heart of any top-hammer machine is the rock drill, and the R30C is certainly no exception. The renowned Terex® Reedrill HPR Series of rock drills are used in a multitude of applications. The simple design—with the fewest internal parts of any drill in the industry—reduces internal wear and allows easy field service, resulting in optimum uptime and increased revenue.

hPR Rock Drills have a simple design, fewer parts, and more performance. Other benefits and features of the Terex® Reedrill HPR series rock drill are:

• Aprovenoscillatorvalvedesign Simple and very efficient; requires no new training for a service technician familiar with Terex® equipment

• Oversizedenergystorageaccumulators Protect the drill valve cycle from energy spiking, add to the longevity of the parts and are a source of reusable energy during the percussion cycle • Highlyefficientenergytransferbetweenhammerandstrikingbar Avoids issues that arise when the diameter of the striking face of the hammer does not match the face of the shank, which causes one or the other to prematurely wear or fail; a mismatch also creates heat in the oscillator, reducing the life of major components

• Longerlifeasaresultofmajorsupportingbushingsmade ofhigh-strengthalloy The alloy has many of the same properties of heat-treated material, including high

surface strength that extends the life of standard metals and component life, therefore reducing operating costs.

The new Terex® Reedrill R30C sports the HPR4519 (19kW output power) rock drill as standard, with the higher energy HPR5123 (23kW output power) available as an option. Either drill accepts 45 mm or 51 mm drill steel.

additional exterior and performance features

The new R30C offers a wealth of new benefits that make it stand out in a crowded field of track drills. Bragging rights belong to the Terex Reedrill SmartDrill drilling system, which uses anti-jam, anti-plug and anti-plunge features to lengthen drill-string life and has proven to increase overall production. The new R30C features a powerful Tier III C-9 engine. From top to bottom, inside and out, the new Terex® Reedrill R30C has been designed to get you drilling fast—and to keep you drilling longer.

interior features

The innovative features of the new R30C continue inside as well, starting with a large cab that’s operator-friendly. Several enhancements that make it inviting to operators include:

• Comfortableoperator’sseatandamplelegroomthat promote productivity

• Armchairjoystickcontrolsallowforcomfortableoperation throughout long shifts

• Excellentvisibilityenablesfastset-uptime,which increases productivity

• ROPS/FOPS-certifiedcab

EffectiveDate:October2008.Productspecificationsandpricesaresubjecttochangewithoutnoticeorobligation.Thephotographsand/ordrawingsinthis document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, expressedorimplied.Productsandserviceslistedmaybetrademarks,servicemarksortrade-namesofTerexCorporationand/oritssubsidiariesintheUSA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries. Copyright 2008 Terex Corporation.

Terex Mining5601 Granite Parkway, Suite 500, Plano, TX 75024, U.S.A.Tel +1 (972) 265-7100 Fax +1 (972) 265-7190sales@terexmining.com www.terexmining.com

Drifter

Model & KW HPR4519 25hp 19kW

Weight 660 lbs 300 kg

Number of blows 2,500-2,700 bpm 2,500-2,700 bpm

Number of revolutions 0-300 rpm 0-300 rpm

Optional HPR5123 30 hp 23 kW

Terex®ReedrillR30CSelf-ContainedHydraulicTrackDrillGeneralSpecifications

Hole Diameter Up to 5 inches Up to 127 mm

Weight 43,400 lbs 19,727

Overall width 102 inches 2,590 mm

Overall height 123 inches 3,124 mm

Tramming

Ground Clearance 15 inches 380 mm

Tramming speed 2.4 mph 4 kph

Gradeability 35 degrees 35 degrees

Track Pad Width 15.1 inches 380 mm

RodChanger

Number of rods x length 5 rods, 12 or 14 ft 5 rods, 3,658 or 4,267

Cab noise level less than 80 dBa 80 dBa

DieselEngine

Model CAT Tier III C-9 Tier III C-9

Speed 1,800 rpm 1,800 rpm

Fuel Capacity 130 gal 492 I

Rated Output 300 hp 223 kW

HydraulicSystem

Type of Pump piston piston

Reservoir capacity 107 gal 405 I

Boom

Boom length 150 inches 3,810 mm

Boom sing angle 70 L, 33 R deg 70 L, 33 R deg

Boom extension 60 inches 1,524 mm

GuideShell

Max. starter rod, standard 240 inches 5,485/4,267 mm

Max. single pass, optional 222 inches 5,639 mm

Feed rate 120 ft/min 37m/min

Compressor

Model Gardner Denver Gardner Denver

Free air delivery maximum 350 cfm 8.2m3/min

Working pressure 150 psig 10 bar

mm