lighter, easier,

composite!

The innovative

floor access cover

2

No concrete-weightOpening the cover couldn’t be easier.

You save up to 85kgs of weight in concrete. (at a size of 80 x 80cm)

Fast-installationFloor coverings (tiles, slabs, parquet)

can be bonded on directly.No concrete filling. No concrete drying time.

New InnovationA modern patented (European patent) access cover.

Composite aluminium honeycomb plates and adhesive technology as used in aircraft construction.

DECK®

CompositeT h e i n n o v a t i v e a c c e s s c o v e r

3

We have reinvented the floor access cover!

Hago have developed a brand new access cover range using technology from lightweight construction for aircraft.

The consistent use of lightweight construction (featherweight honeycomb panel) means maximum weight savings (no concrete filling) and easy opening.

The frame does not need to be filled with concrete.This makes installation quicker and simpler.And there’s no need to wait for the concrete to dry.

Aluminium frame profile

EPDM seal

Aluminium cover frame

High-strength bonding

Stainless steel screwconnections

Honeycomb core (featherweight)

Adhesive layer

Aluminium covering plate (with white coating)

Tile adhesive applied on site(e.g. Mapei Keralastic)

Floor finish to be installed on site

Possible uses:

Stone slabs

Tiles

Parquet

4

Up to 70% lighterthan concrete-filled!

Type CLA composite light aluminiumsealed

Load capacity: Class A (15kN test load) EN 124

Materials: Frame in extruded aluminium. Cover in extruded aluminium bonded to a composite aluminium honeycomb panel(with a white coating). Stainless steel screw connections. EPDM sealing

Features: Modern lightweight-construction access cover.Major weight-savings compared to concrete-filled access covers.Opening the light cover couldn’t be easier. As the cover is not filledwith concrete, installation is quicker and simpler. There is a recess of 24mm for laying slabs, tiles, parquet etc. In the case ofthin tiles, the difference in height can be compensated for by usinga suitable tile adhesive (MAPEI Keralastic) and waterproof buildingboard. Sealed design with a very high-quality finish. Very attractivesurface, particularly the visible edges. Inconspicuous corner jointsmake it easy to connect tiles, slabs etc.

Opening with the Lift-Off System:Every HAGODECK Type CLA composite light aluminiumcomes with a set of lifting keys and detailed installation instructions.The HAGO advantage: Jammed covers are released by simplyturning the Golden Key.

Recommended applications: As a cover inside buildings (pedestrian traffic only), which can be opened by 1-2 persons (depending on the size of the cover) without great effort.

Installation: Installation has to be carried out according to our installation instructions. In the case of water tight covers, care mustbe taken to seal the outer frame into the surrounding floor. Attachslabs or tiles fully (over the whole surface) with a suitable tile ad-hesive (MAPEI Keralastic). In the case of thin tiles or slabs, use wa-terproof building board to compensate for the difference in height.

Specification clause: Aluminium composite access cover, lightweight construction with honeycomb core, Type HAGODECK CLA, clear opening ..... x ..... cm, leaving a recessof 24mm suitable for site finishing with the architects choice of floor finish, sealed, with Golden Key Lift-Off opening tools, 15 kN (EN 124). Installation to be carried out according to the manufacturer’s instructions.Producer: HAGO 4600 Wels, Austria. www.hago.at

1 4

7

6 3 5 2 8

c x d60 60

A x B

76,5

50

recess 24 mm

9

1 Frame2 Cover3 Seal4 Allen screw (stainless steel)5 Plastic cap6 Aluminium-honeycomb plate (with white coating)7 Injection-moulded part (plastic)8 Square boss (stainless steel)9 Die-cast corner (aluminium)

Type CLA composite lightThe super-lightweight cover

DECK®

A C C E S S C O V E R S

Type Clear dimensionsof shaft

(approx. cm)

Outside dimensions(approx. cm)

Weight withoutfloor finish

S/O*

c x d A x B

CLA 22 20 x 20 32 x 32 3 kg S

CLA 33 30 x 30 42 x 42 5 kg S

CLA 44 40 x 40 52 x 52 7 kg S

CLA 55 50 x 50 62 x 62 9 kg S

CLA 64 60 x 40 72 x 52 9 kg S

CLA 66 60 x 60 72 x 72 10 kg S

CLA 86 80 x 60 92 x 72 12 kg S

CLA 88 80 x 80 92 x 92 15 kg S

CLA 106 100 x 60 112 x 72 15 kg S

Cover depth approx. 6,6 cm, installation height approx. 7,6 cmSpecial sizes possible*S= available from stock, *O= to order

Type CLA composite light aluminium

5

1

50

117,5

60 c x d

6 4 5 11 10 3 2 7

8

9

76,5

82

A x B

recess 24 mm

The cover is lifted by the hinge, significantlyreducing the effort required.

Detailed view of the safety device

1 Frame2 Cover 3 Seal4 Allen Screw (stainless steel)5 Die-cast corner (aluminium)6 Platic cap7 Hinge 8 Injection-moulded part (plastic)9 Square boss (stainless steel)

10 Safety device11 Aluminium honeycomb plate (with white coating)

Type Clear dimensionsof shaft

(approx. cm)

Outside dimensions(approx. cm)

Weight withoutfloor finish

S/O*

c x d A x B

CCA 55 50 x 50 62 x 64 10 kg S

CCA 64 60 x 40 72 x 54 10 kg S

CCA 66 60 x 60 72 x 74 12 kg S

CCA 86 80 x 60 92 x 74 14 kg S

CCA 88 80 x 80 92 x 94 17 kg S

CCA 106 100 x 60 112 x 74 17 kg S

Cover depth approx. 6.6 cm, installation height approx. 7.6 cmSpecial sizes possible*S= available from stock, *O= to order

Type CCA composite comfort aluminium

Load capacity: Class A (15kN test load) EN 124

Materials: Frame in extruded aluminium. Cover in extruded aluminium bonded to a composite aluminium honeycomb panel(with a white coating). Stainless steel screw connections. EPDM seal

Features: modern lightweight-construction access cover.Major weight-savings compared to concrete-filled accesscovers. The cover is lifted by the hinge, significantly reducing theeffort required. A safety device is fitted, locking the cover in the rai-sed position. As the cover is not filled with concrete, installation isquicker and simpler. There is a recess of 24mm for laying slabs,tiles, parquet etc. In the case of thin tiles, the difference in heightcan be compensated for by using a suitable tile adhesive (MAPEIKeralastic) and waterproof building board. Sealed design with avery high-quality finish. Very attractive surface, particularly the visibleedges. Inconspicuous corner joints make it easy to connect tiles,slabs etc.

Opening with the Lift-Off System with the help of the hinge: Every HAGODECK Type CCA composite comfort aluminium comes with a set of lifting keys and detailed installa-tion instructions.The HAGO advantage: Jammed covers are released by simplyturning the Golden Key.

Recommended applications: As a cover inside buildings whichcan be opened by one person.

Installation: Installation should be carried out according to our installation instructions. In the case of water tight covers, care mustbe taken to seal the outer frame into the surrounding floor. Attachslabs or tiles fully (over the whole surface) with a suitable tile adhesive (MAPEI Keralastic). In the case of thin tiles or slabs, usewaterproof building board to compensate for the difference inheight.

Specification clause: Aluminium composite lightweight construction access cover with honeycomb core Type HAGO-DECK CCA, with hinge, clear opening ..... x ..... cm, leaving a recessof 24mm suitable for site finishing with the architects choice offloor finish, sealed, largely water tight, with Golden Key Lift-Offopening tools, 15 kN (EN 124). Installation to be carried out accor-ding to the manufacturer’s instructions.Producer: HAGO 4600 Wels, Austria. www.hago.at

6

Type CCA composite comfort aluminiumwith hinge, sealed

DECK®

A C C E S S C O V E R S

1

50

117,5

60 c x d

6 4 5 11 10 3 2 7

8

9

76,5

82

A x B

80,5

157

12

recess 24 mm

Extremely easy to open thanks to lightweight construction and gas-lift struts

Detailed view of the safety deviceand gas-lift struts

1 Frame2 Cover 3 Seal4 Allen screw (stainless steel)5 Die-cast corner (aluminium)6 Plastic cap7 Hinge 8 Injection-moulded part (plastic)9 Square boss (stainless steel)

10 Safety device11 Aluminium honeycomb plate (with white coating)12 Gas-lift struts

Type Clear dimensionsof shaft

(approx. cm)

Outside dimensions(approx. cm)

Weight withoutfloor finish

S/O*

c x d A x B

CCA-GD 66 60 x 60 72 x 74 13 kg S

CCA-GD 86 80 x 60 92 x 74 15 kg S

CCA-GD 88 80 x 80 92 x 94 18 kg S

CCA-GD 106 100 x 60 112 x 74 18 kg S

Cover depth approx. 6.6 cm, installation height approx. 7.6 cmSpecial sizes possible*S= available from stock, *O= to orderType CCA-GD composite comfort aluminium

Load capacity: Class A (15kN test load) EN 124

Materials: Frame in extruded aluminium. Cover in extruded aluminium bonded to a composite aluminium honeycomb panel(with a white coating). Stainless steel screw connections. EPDM seal. High-quality gas-lift struts.

Features: Modern lightweight-construction access cover with maximum ease of opening. Major weight-savings comparedto concrete-filled access covers. Extremely easy to open thanksto gas-lift struts.A safety device is fitted, locking the cover in the raised position. As the cover is not filled with concrete, installation is quicker andsimpler. There is a recess of 24mm for laying slabs, tiles, parquet etc. In thecase of thin tiles, the difference in height can be compensated forby using a suitable tile adhesive (MAPEI Keralastic) and waterproofbuilding board. Sealed design with a very high-quality finish. Veryattractive surface, particularly the visible edges. Inconspicuous cor-ner joints make it easy to connect tiles, slabs etc.

Opening with the Lift-Off System with the help of thehinge: Every HAGODECK Type CCA-GD composite comfortaluminium comes with a set of lifting keys and detailed installa-tion instructions.The HAGO advantage: Jammed covers are released by simplyturning the Golden Key.

Recommended applications: As a cover inside buildings whichcan be very easily opened by one person.

Installation: Installation should be carried out according to our installation instructions. In the case of water tight covers, care mustbe taken on site to tightly seal the outer frame into the surroun-ding floor. Attach slabs or tiles fully (over the whole surface) with asuitable tile adhesive (MAPEI Keralastic). In the case of thin tiles orslabs, use waterproof building board to compensate for the diffe-rence in height.

Specification clause: Aluminium composite lightweight construction access cover with honeycomb core Type HAGODECK CCA-GD, with hinge and gas-lift struts, clearopening ..... x ..... cm, leaving a recess of 24mm suitable for site finishing with the architects choice of floor finish, sealed, largelywater tight, with Golden Key Lift-Off opening tools.15 kN (EN 124). Installation to be carried out according to the ma-nufacturer’s instructions.Producer: HAGO 4600 Wels, Austria. www.hago.at

7

DECK®

A C C E S S C O V E R SType CCA-GD composite comfort aluminium

with hinge and gas-strut lift, sealed

TECHNICAL BU ILDING PRODUCTS

Main office:HAGO Bautechnik GmbHA-4600 Wels, Traklstraße 19AUSTRIATel: ++43 (0) 72 42 / 66 3 41-0Fax: ++43 (0) 72 42 / 66 3 41-23e-mail: office@hago.at

www.hago.at

vers

ion

12/0

8