Upload
prince-santo
View
216
Download
0
Embed Size (px)
DESCRIPTION
this is about the quesstionaire.
Citation preview
DPD CAPABILITY QUESTIONNAIREPlease complete this form submit when new DPD processes are planned/added and annually.
If no changes have occurred, mark “No Changes” and submit.
COMPANY NAME:
Supplier Code: Date:
Supplier DPD contact name: Phone:
Supplier DPD contact e-mail address:
1. Hardware and software currently used in your CAD/CAM operations:UNIGRAPHICS
Unigraphics Version Level:
CATIACATIA Version/Funct Release:
CATIA Operating System Version:
CATIA PFT Requirements Met:
OTHER CAD SYSTEMS
Software Version
2. Format and media type you require for dataset transfer: (Not required for web-based data exchange.):
Operating System Media Type Format
Preferred:
Alternate:
3. Do you have IGES or STEP capability?
IGES Version level:
Form # : 400-3-1114-421E Page 1 of 3 Pages Rev: B ,11/2015
STEP Version level:
4. Have any of the following been installed and tested by IAI?
FTP MANTRA PDM STEP IAI Step Version Tested:
Date:
5. Indicate which of the following DPD processes you use or plan to use for product acceptance:Theodolite: Laser Tracker: Digitally Defined Tooling / templates:
Fixed CMM: Portable CMM: Analysis, Translation, or Manipulation Software:
2D Scanner: Laser Scanner: Sub-tier Supplier Inspection:
Photogrammetry: Plotted Mylars: Planning / Viewing Software:
Test Equipment:
Other:
6. Does your work for IAI CAG include the use of any of the following types of IAI data?CAD Engineering: Reduced Content Datasets /
Model Based Definition:3D Contours & Surfaces
7. Do you inspect IAI CAG products using digital datasets provided by IAI CAG? Check if yes
8. List NC types used at your facility (e.g.: machining, waterjet, etc.)
9. What IAI divisions (sites) or programs do you receive digital data from?
10. Indicate your commodity type(s):
Machined parts: Sheet Metal: Assembly:
Form # : 400-3-1114-421E Page 2 of 3 Pages Rev: B ,11/2015
Electrical or Hydraulics: Tubing: Nometallic:
Casting/Forging:
Other:
11. DPD experience with other aerospace companies:Provide the names of any such company who have approved your DPD processes and the period (years) of experience with each.
12. Questions, comments, explanations?
Please return this form to: [email protected]
Form # : 400-3-1114-421E Page 3 of 3 Pages Rev: B ,11/2015