Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
ST-HDC QUICK START GUIDE
1
TABLE OF CONTENTS Chapter 1 Description of Panels ..................................................................................................................... 6
1.1 Front Panel ...................................................................................................................................... 6
1.2 Rear Panel ....................................................................................................................................... 7
Chapter 2 Installation and Connections ......................................................................................................... 8
2.1 DVR Installation .............................................................................................................................. 8
2.2 Hard Disk Installation ...................................................................................................................... 8
2.3 RS-485 and Controller Connection................................................................................................ 10
2.4 HDD Storage Calculation Chart .................................................................................................... 11
Chapter 3 Menu Operation ........................................................................................................................... 12
3.1 Menu Structure .............................................................................................................................. 12
3.2 Startup and Shutdown .................................................................................................................... 12
3.3 Activating Your Device ................................................................................................................. 13
3.4 Login and Logout .......................................................................................................................... 14
User Login ....................................................................................................................................... 14
User Logout ..................................................................................................................................... 15
3.5 Using the Setup Wizard ................................................................................................................. 16
3.6 Network Settings ........................................................................................................................... 16
3.7 Adding IP Cameras ........................................................................................................................ 17
3.8 Live View ...................................................................................................................................... 18
3.9 Recording Settings......................................................................................................................... ..19
3.10 Playback ........................................................................................................................................ 19
Chapter 4 Remote Access................................................................................................................................ 21
4.1 Web Browser ................................................................................................................................... 21
4.2 Mobile Apps .................................................................................................................................... 22
ST-HDC QUICK START GUIDE
2
Quick Start Guide
This Manual is applicable to HD Coaxinator TVI digital video recorders (DVR).
The Manual includes instructions for using and maintaining the product. Pictures, charts, images and all
other information hereinafter are for description and explanation purposes only. The information contained
in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the
latest version on the SecurityTronix website or by contacting your dealer.
Please use this user manual under the guidance of professionals to ensure a safe and proper deployment.
Legal Disclaimer
THE USE OF THE PRODUCT SHALL BE WHOLLY AT YOUR OWN RISK. SECURITYTRONIX SHALL
NOT BE LIABLE FOR ANY ABNORMAL OPERATION, BREACH OF PRIVACY OR OTHER DAMAGES
RESULTING FROM CYBER ATTACK, HACKING, VIRUS INFECTION, OR OTHER INTERNET
SECURITY RISKS. SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL
RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE
THAT USE CONFORMS TO ALL APPLICABLE LAWS. SECURITYTRONIX SHALL NOT BE LIABLE IN
THE EVENT THAT THIS PRODUCT IS USED WITH PURPOSES NOT COMPLIANT WITH LOCAL OR
FEDERAL LAW.
For further assistance, or if you encounter any issue while using this product, please contact your
distributor or Securitytronix at: 800-688-9282 Press 3 for support, then 2 for CCTV.
ST-HDC QUICK START GUIDE
3
Regulatory Information
FCC Information
FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at his own expense.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE" and comply
therefore with the applicable harmonized European standards listed under the EMC Directive
2004/108/EC, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper recycling, return this product to your local
supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection
points. For more information see: www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted
municipal waste in the European Union. See the product documentation for specific battery
information. The battery is marked with this symbol, which may include lettering to indicate
cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a
designated collection point. For more information see: www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.
WARNING: THIS PRODUCT CAN EXPOSE YOU TOPOLYBROMINATED BIPHENYLS, WHICH IS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. FOR MORE INFORMATION GO TO WWW.PROP65WARNINGA.CA.GOV
ST-HDC QUICK START GUIDE
4
Safety Instruction
These instructions are intended to ensure proper use of this product to avoid danger or property loss. The
precaution measure is divided into “Warnings” and “Cautions”
Warnings: Serious injury or death may occur if any of the warnings are neglected.
Cautions: Injury or equipment damage may occur if any of the cautions are neglected.
Warnings
Proper configuration of all passwords and other security settings is the responsibility of the installer and/
or end-user.
While using this product, you must be in strict compliance with the electrical safety regulations of the
nation and region. Please refer to technical specifications for detailed information.
Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source
with 100~240 VAC or 12 VDC according to the IEC60950-1 standard. Please refer to technical
specifications for detailed information.
Do not connect several devices to one power adapter as adapter overload may cause over-heating or a
fire hazard.
Please make sure that the plug is firmly connected to the power socket.
If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable,
then please contact technical support.
Preventive and Cautionary TipsBefore connecting and operating your device, please be advised of the following tips:
Ensure the unit is installed in a well-ventilated, dust-free environment.
This unit is designed for indoor use only.
Keep all liquids away from the device.
Ensure environmental conditions meet the factory specifications.
Ensure the unit is properly secured to a rack or shelf. Major shocks or jolts to the unit as a result of
dropping it may cause damage to the sensitive electronics within the unit.
Use the device in conjunction with a UPS if possible.
Power down the unit before connecting and disconnecting accessories and peripherals.
Only surveillance grade HDDs should be used with this recorder.
Improper use or replacement of the battery may result fire or explosion hazard. Replace with the same or
equivalent type only. Dispose of used batteries according to the instructions provided by the battery
manufacturer.
Warnings Follow these
safeguards to prevent serious
injury or death.
Cautions Follow these precautions
to prevent potential injury or
material damage.
ST-HDC QUICK START GUIDE
5
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol Description
Indicates a potentially hazardous situation, which if not avoided,
could result in equipment damage, data loss, performance
degradation, or unexpected results.
ST-HDC QUICK START GUIDE
6
Chapter 1 Description of Panels
1.1 Front Panel
Figure 1. 1 Front Panel 2
Table 1. 1 Description of Front Panel 2
No. Name Function Description
1
POWER Power indicator turns illuminates when the power switch
on the rear panel is turned on.
STATUS Status indicator blinks when data is being read from or written to
the HDD.
Tx/Rx Tx/Rx indicator blinks when the network connection is functioning properly.
2
DIRECTIONS
The DIRECTION buttons are used to navigate between different
fields and items in menus.
In the Playback mode, the Up and Down button is used to speed up
and slow down recorded video. The Left and Right button will select
the next and previous record files.
In Live View mode, these buttons can be used to cycle through
channels.
In PTZ control mode, it can control the movement of the PTZ
camera.
ENTER
The ENTER button is used to confirm selection in any of the menu
modes.
It can also be used to tick checkbox fields.
In Playback mode, it can be used to play or pause the video.
In single-frame Playback mode, pressing the button will advance the
video by a single frame.
3 Menu Access the main menu interface
4 ESC Exit and back to the previous menu.
5 IR Receiver Receiver for IR remote controller.
6 USB Interfaces Universal Serial Bus (USB) ports for additional devices such as
USB mouse and USB thumb drives (for backup/ FW upgrades)
ST-HDC QUICK START GUIDE
7
1.2 Rear Panel
Note:
The rear panel varies according to different models of the ST-HDC series recorders. Please refer to the actual
product. The following figure is for reference only.
Figure 1. 2 Rear Panel
Table 1. 2 Description of Front Panel
No. Item Description
1 VIDEO IN BNC interface for HDC-TVI and analog video input.
2 VIDEO OUT BNC connector for video output.
3 AUDIO IN RCA connector
4 AUDIO OUT RCA Connector
5 VGA DB15 connector for VGA output. Display local video output and
menu.
6 HDMI HDMI video output connector.DB15 connector for VGA output.
Display local video output and menu.
7 USB Port Universal Serial Bus (USB) port for additional devices.
8 Network Interface RJ45 port for network connectivity
9 RS-485
D+, D- pin connects to Ta, Tb pin of controller. For cascading
devices, the first DVR’s D+, D- pin should be connected with the
D+, D- pin of the next DVR.
10 Power Supply 12VDC Power Input
11 Power Switch Switch for turning on/off the device.
12 GND Ground
ST-HDC QUICK START GUIDE
8
Chapter 2 Installation and Connections
2.1 DVR Installation
Please follow the installation tips below:
1. Use brackets for rack mounting (16CH version only)2. Ensure there is ample room for audio and video cables.
3. When installing cables, ensure that the bend radius of the cables are no less than five times than its diameter.
4. Connect both the alarm and RS-485 cable (optional).5. Allow at least 2cm (≈0.75-inch) of space between rack mounted devices.
6. Ensure the DVR is properly grounded.
7. Environmental temperature should be within the range of 14° F - 131°F.8. Environmental humidity should be within the range of 10% to 90%.
2.2 Hard Disk Installation
Before you start:
Before installing a hard disk drive (HDD), please make sure the power is disconnected from the DVR. A
surveillance grade HDD is recommended when using the ST-HDC series DVRs.
One or two SATA hard disks can be installed (refer to specification sheet).
Tools Required: Screwdriver.
Note:
Cover screw locations are slightly different between models. 8CH recorder shown as an example.
Steps:
1. Remove the cover from the DVR by unfastening the screws on the back and side.
Figure 2. 1 Remove the Cover
2. Connect one end of the data cable to the motherboard of DVR and the other end to the HDD.
ST-HDC QUICK START GUIDE
9
Figure 2. 2 Connect the Data Cable
3. Connect one end of the power cable to the motherboard of DVR and the other end to the HDD.
Figure 2. 3 Connect the Power Cable
4. Place the HDD in the bottom of the device, aligning the screw holes, and then fasten the screws through
Figure 2. 4 Install the HDD
5. Re-install the cover of the DVR and fasten screws.
the bottom to secure the HDD.
ST-HDC QUICK START GUIDE
10
2.3 RS-485 and Controller Connection
Typical Connection :
Figure 2. 5 Controller Connection A
To connect PTZ to the DVR:
1. Disconnect the removable connector from the RS-485 terminal block.
2. Press and hold the orange part of the removable connector, insert the signal cables into their slots and
release the orange part. Ensure the signal cables are tightly secured.
3. Connect A+ on PTZ to D+ on terminal block and B- on controller to D- on terminal block. Secure the
terminal fastening screws.
4. Re-connect the removable connector back into the terminal block.
Note:
Make sure both the controller and DVR are grounded.
ST-HDC QUICK START GUIDE
11
2.4 HDD Storage Calculation Chart
The following chart shows an estimation of storage space used based on recording at one channel for an hour at a
fixed bit rate.
Bit Rate Storage Used
96K 42M
128K 56M
160K 70M
192K 84M
224K 98M
256K 112M
320K 140M
384K 168M
448K 196M
512K 225M
640K 281M
768K 337M
896K 393M
1024K 450M
1280K 562M
1536K 675M
1792K 787M
2048K 900M
4096K 1.76G
8192K 3.52G
16384K 7.03G
Note:
Please note that these values for storage space used are for reference only. Storage space used is estimated by
formulas and may have some deviation from the actual value.
ST-HDC QUICK START GUIDE
12
Chapter 3 Menu Operation
3.1 Menu Structure
Note:
The menu structure may vary slightly between models.
Menu
Export Manual HDD Camera Maintenance ShutdownRecord ConfigurationPlayback
Normal Record General Schedule Camera General System Info Logout
Event Advanced Parameters OSD NetworkLog
InformationShutdown
Advanced ImageImport/
ExportReboot
Holiday PTZ Upgrade
Motion
Live View
Default
Privacy Mask
Exceptions
Net Detect
Video
Tampering
User
Video Loss
HDD Detect
Alarm
VCA
Normal
Event
Tag
Smart
Sub-periods
External
File
VCA Search
Behavior
Search
Face Search
People
Counting
Heat Map
Alarm
Manual Video Quality
Diagnostics
Video Quality
Diagnostics
Figure 3. 1 Menu Structure
3.2 Startup and Shutdown
Proper startup and shutdown procedures are crucial to expanding the life of the DVR.
To start your DVR: 1. Ensure the power supply is plugged into an electrical outlet. It is HIGHLY recommended that an
Uninterruptible Power Supply (UPS) be used in conjunction with the DVR.
2. Press the POWER button on the front panel. The Power LED should turn on. The unit will begin to start.
After the device starts up, the Setup Wizard will guide you through the initial settings, including
modifying
ST-HDC QUICK START GUIDE
13
password, date and time settings, network settings, HDD initializing, and recording.
To shut down the DVR: 1. Enter the Shutdown menu.
Menu > Shutdown
Figure 3. 2 Shutdown
2. Select the Shutdown button.
3. Click the Yes button.
3.3 Activating Your Device
Upon first-time access, you will need to activate the device by setting an admin password. No operation is
allowed before activation. You can also activate the device via Web Browser, SADP or CMS software.
Steps:
1. Input your desired password in the Create New Password and Confirm New Password fields.
Figure 3. 3 Set Admin Password
STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong
password of your own choosing (using a minimum of 8 characters, including upper case letters,
lower case letters, numbers, and special characters) in order to increase the security of your
product. We also recommend you reset your password regularly, especially in high security
applications; resetting the password monthly or weekly can better protect your product.
2. Click OK to save the password and activate the device.
ST-HDC QUICK START GUIDE
14
Figure 3. 4 Warning of Weak Password
3.4 Login and Logout
User Login
You must be logged into the device before operating the menu and other functions.
Steps:
1. Select the desired User Name in the dropdown list.
Figure 3. 5 Login
2. Input the correct Password.
3. Click OK to log in.
Note:
If the wrong password is entered 7 times for the admin account, the account will be locked for 60 seconds.
Operator accounts will be locked after 5 failed login attempts.
ST-HDC QUICK START GUIDE
15
Figure 3. 6 User Account Protection for the Admin
Figure 3. 7 User Account Protection for the Operator
User Logout
Steps:
1. Enter the Shutdown menu.
Menu > Shutdown
Figure 3. 8 Logout
2. Click Logout.
Note:
After you have logged out the system, menu operation is impossible. You must enter a user name and password
to resume menu operation.
ST-HDC QUICK START GUIDE
16
3.5 Using the Setup Wizard
The Setup Wizard can walk you through some important settings of the device. By default, the Setup Wizard
starts once the device has booted up.
Click Next to continue the setup wizard. Follow the guide to configure system resolution, system date/time,
network settings, HDD management, record settings, etc.
Figure 3. 12 Wizard
3.6 Network Settings
Network settings must be properly configured before you can use the DVR over a network.
Steps:
1. Enter the Network Settings interface.
Menu > Configuration > Network
Figure 3. 13 Network Settings
ST-HDC QUICK START GUIDE
17
2. Select the General tab.
3. In the General Settings interface, you can configure the following settings: NIC Type, IPv4 Address, IPv4
Gateway, MTU and DNS Server.
If a DHCP server is available, you can check the DHCP checkbox to automatically obtain an IP address and
other network settings from the server.
4. After configuring the general settings, click the Apply button to save.
3.7 Adding IP Cameras
Before you can obtain live video from an IP camera, you must first properly enter the camera information
into the DVR's connection list.
Before you start:
Ensure the network settings are valid and correct, and the IP camera to add has already been activated. Steps:
1. Select the Add IP Camera option from the right-click menu in live view mode or click Menu> Camera>
Camera to enter the IP camera management interface.
Figure 3. 14 IP Camera Management
3.8 Live View
Some icons are provided on-screen in Live View mode to indicate different camera statuses. These icons include
showing the status of the record and alarm function.
ST-HDC QUICK START GUIDE
2. Select the IP camera from the list and click the button to add the camera (with the same passwordas the DVR's admin), or click the Custom Adding button to open the Add IP Camera (Custom)
interface.
Figure 3. 15 Add IP Camera
3. Select the detected IP camera and click the Add button to add it directly, or you can click the Search
button to refresh the list of online cameras.
You can also choose to custom add the IP camera by editing the parameters in the corresponding text field
and then clicking the Add button to add it.
Indicating that there is an alarm or alarms. Alarms include video loss, tampering, motion detection or
sensor alarm, etc.
Recording (manual recording, continuous recording, motion detection or alarm-triggered recording)
Alarm & Recording
Event/Exception (event and exception information; appears at the lower-left corner of the screen.)
18
ST-HDC QUICK START GUIDE
19
3.9 Recording Settings
Before you start:
Make sure that the HDD has already been installed. If not, please install a HDD and initialize it.
Steps:
1. On the live view window, right-click the window and move the cursor to the Start Recording option, and
select Continuous Record or Motion Detection Record
Figure 3. 16 Start Recording from Right-Click Menu
2. Click the Yes button in the pop-up message box to confirm the settings. All the channels will start
to record in the selected mode.
3.10 Playback
The recorded video files on the hard disk can be played back in the following modes: instant playback, all-day
playback (for the specified channel), and playback by normal/event/smart/tag/sub-periods/external file search.
Steps:
1. Enter the playback interface.
Click Menu>Playback or select Playback from the right-click menu
2. Check the checkbox of the channel(s) in the list and then double-click to select a date on the calendar.
3. You can use the toolbar in the bottom part of the Playback interface to control playing progress.
ST-HDC QUICK START GUIDE
20
Figure 3. 17 Playback Interface
4. Select the channel(s) you want to play back by checking the checkbox(es), or execute simultaneous playback
of multiple channels.
ST-HDC QUICK START GUIDE
21
Chapter 4 Remote Access
You acknowledge that the use of the product with Internet access might be present network security risks. To
mitigate network attacks and information theft, please ensure the network is protected. If the product does not
work properly, please contact your dealer or the nearest service center.
You may access the DVR via Internet Explorer v8.0 and above, and Google Chrome v18 and above (via IE Tab).
Steps:
1. Open web browser, input the IP address of the device and then press Enter.
2. Log in to the device.
• If the device has not been activated, you need to activate the device first before login.
Figure 4. 1 Set Admin Password
1) Set the password for the admin user account.
2) Click OK to log in to the device.
STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong
password of your own choosing (using a minimum of 8 characters, including upper case letters,
lower case letters, numbers, and special characters) in order to increase the security of your
product. And we recommend you reset your password regularly, especially in the high security
applications, resetting the password monthly or weekly can better protect your product.
• If the device is already activated, enter the user name and password in the login interface, and click the
Login button.
4.1 Web Browser
ST-HDC QUICK START GUIDE
22
Figure 4. 2 Login
3. Installation of the plug-in before viewing the live video and managing the DVR is required. Please
Note:
You may have to close the web browser to finish the installation of the plug-in.
After logging in, you can perform regular operation and configuration, including live view, playback, log search, configuration, etc.
4.1 Mobile Apps
You acknowledge that the use of the product with Internet access might be under network security risks. To
mitigate network attacks and information theft, please ensure the network is protected. If the product does not
work properly, please contact your dealer or the nearest service center.
Once the device is configured on the network, and there are no restrictions in place preventing the recorder from
accessing the internet, you can access the DVR from a mobile device to view live video as well as playback.
Steps:
1. Download the "STGO2" application onto the mobile device(s) that will be accessing the DVR
2. Select the country it will be operated in, and select LOGIN
• If the device has not been activated, you need to activate the device first.• This tutorial covers Cloud P2P connection. DDNS and direct IP are other options.
follow the installation prompts to install the plug-in.
23
ST-HDC QUICK START GUIDE
Figure 4.3 Registration
3. Accept the terms of service, and select a registration method.4. Verify the account using the code sent to either the email address or phone number used.
Figure 4.4 Verification
5. Click on the " + " icon in the upper right corner, then scan the QR code displayed in theMENU>CONFIGURATION>NETWORK>ACCESS PLATFORM sub-menu of the DVR(if no QR code is present, ensure that the Enable checkbox is checked)
6. You will then need to enter the Verification code on that same screen into the mobile app7. Once added, you can now access Live/ Playback streams from the mobile device
Figure 4.5 QR ScanFigure 4.4 Add Device
24
ST-HDC QUICK START GUIDE
SECURITYTRONIX 2-Year Limited Stand Alone Digital Video Recorder Warranty
Securitytronix. (the "Company") warrants to the Original Purchaser that the Stand Alone Digital Video Recorderis free from defects in workmanship or material under normal use. This warranty starts on the date of shipmentof the hardware to the Original Purchaser. Any Hard Drive installed in the Stand Alone Digital Video Recorder isthe warranty responsibility of the Hard Drive Manufacturer and is not covered by this or any other Securitytronixwarranties. During the warranty period, the Company agrees to repair or replace, at its sole option, withoutcharge to Original Purchaser, any defective component in the Stand Alone Digital Video Recorder. To obtainservice, the Original Purchaser must return the Stand Alone Digital Video Recorder to the Company properlypackaged for shipping. All defective products must be returned to the Company within thirty (30) days of failure.Products must be returned with a description of the failure and Return Merchandise Authorization (RMA)number supplied by the Company. To receive a RMA number and a return shipping address on where to deliverthe hardware, call 610-429-1821. The shipping, and insurance charges incurred in shipping to the Company willbe paid by Original Purchaser, and all risk for the hardware shall remain with the Original Purchaser until suchtime as Company takes receipt of the hardware. Upon receipt, the Company will promptly repair or replace thedefective unit, and then return said unit to Original Purchaser, shipping prepaid. The Company may usereconditioned or like-new parts or units, at its sole option, when repairing any hardware. Repaired productsshall carry the same amount of outstanding warranty as from original purchase. Any claim under the warrantymust include dated proof of purchase or invoice. In any event, the Company's liability for defective hardware islimited to repairing or replacing the hardware. This warranty is contingent upon proper use of the hardware byOriginal Purchaser and does not cover: if damage is due to Acts of God (including fire, flood, earthquake, storm,hurricane or other natural disaster), accident, unusual physical, electrical, or electromechanical stress,modifications, neglect; misuse, operation with media not approved by the Company, tampering with or alteringof the hardware, war, invasion, act of foreign enemies, hostilities (regardless of whether war is declared), civilwar, rebellion, revolution, insurrection, military or usurped power or confiscation, terrorist activities,nationalization, government sanction, blockage, embargo, labor dispute, strike, lockout or interruption or failureof electricity, air conditioning, or humidity control, internet, network, or telephone service The warranties givenherein, together with any implied warranties covering the hardware, including any warranties of merchantabilityor fitness for a particular purpose, are limited in duration to two years from the date of shipment to the OriginalPurchaser. Jurisdictions vary with regard to the enforceability of warranty limitations, and you should check thelaws of your local jurisdiction to find out whether the above limitation applies to you. The Company shall not beliable to you for loss of data, loss of profits, lost savings, special, incidental, consequential, indirect, or othersimilar damages arising from breach of warranty, breach of contract, negligence, or other legal action even if theCompany or its agent has been advised of the possibility of such damages, or for any claim brought against youby another party. Jurisdictions vary with regard to the enforceability of provisions excluding or limiting liabilityfor incidental or consequential damages. You should check the laws of your local jurisdiction to find out whetherthe above exclusion applies to you. This warranty allocates risks of product failure between Original Purchaserand the Company. The Company's hardware pricing reflects this allocation of risk and the limitations of liabilitycontained in this warranty. The warranty set forth above is in lieu of all other express warranties, whether oralor written. The agents, employees, distributors, and dealers of the Company are not authorized to makemodification to this warranty, or additional warranties binding on the Company. Accordingly, additionalstatements such as dealer advertising or presentations, whether oral or written, do not constitute warranties bythe Company and should not be relied upon. This warranty gives you specific legal rights. You may also haveother rights which vary from one jurisdiction to another.
For further assistance, or if you encounter any issue while using this product, please contact your distributor or Securitytronix at: 800-688-9282 Press 3 for support, then 2 for CCTV.