2

3

datastreamnep datastreamnep

datastreamnepremote Guide // QUICK START

Manual Program Remote for Television

Auto Program Remote for Television

Program NEW Remote to Control STB

1. Visit www.nep.net/remote to download TV codes or locate your TV type and make in the TV Codes pamphlet or pdf.

2. Turn on TV.

3. Hold down the TV button until it lights up and stays lit.

4. Type in a 4 digit code from the TV Codes pamphlet or pdf. a. Test Volume - press volume up and down b. Test Power - press Blue Power button at the top of remote If either test fails go to next code in TV Codes pamphlet/pdf. If HD codes do not work locate and test SD codes.

5. Once a working code is found hit the STB button to be sure you can control the Set Top Box.

6. Write working code here for future access:

1. Turn on TV.

2. Hold down the TV button until it lights up and stays lit.

3. Press the Blue Power button once aiming the remote at TV.

4. Press either the Channel Up or Channel Down to start Auto Scan.

5. Auto Scan will test a Code in 5 second intervals. The TV button will blink everytime a new code is tested. This can take up to 15 minutes to complete.

6. If / When the TV turns off press the OK button on the remote to lock in the code. If all codes have been tested and the OK button was not pressed the TV key will blink 7 times and Auto Scan will be terminated.

1. Program Remote for TV first. See options above.

2. Hold down the STB button until it lights up and stays lit.

3. Press the Blue Power button once aiming the remote at the Set Top Box.

4. Press the Number 1 button. Remote will be programed to work that Set Top Box.

www.nep.net

3

2

4

4

6

5

3

4

datastreamnep datastreamnep

datastreamnepremote Guide //

www.nep.net

DEVICE SELECTION

Press to control your TV, STB, or Auxiliary Device

PLAYBACK CONTROLS

Control playback of DVD or DVR

DVR & LIVE TV

Press DVR to use the DVR functions,

and press LIVE TV to return to live TV from viewing a recording

ASPECT RATIO SETTINGS

Change TV’s aspect ratio or switch from

SD to HDOK

Enter a choice you have selected

BACK

Return to the previous selection / screen

VOL + / -

Adjust volumeMUTE

Toggle audio on/offNUMBER PAD

Enter a channel number or PIN

INPUT

Choose between TV connections

POWER

Turn a selected device on or offRECORD

Begin recordingCALLER ID

Press for On Screen Caller ID LogVUDU Press to activate Vudu Movies & AppsMENU

Display main menuINFO

Display information about the current programARROW KEYS

Move the highlight in menu screensEXIT

Exit current menuGUIDE

Display the guideCH/PG UP/DOWN

Change the channel or move guide up or down an entire pageLAST

Return to the previous channelCC

Toggles Closed Captioning on/off

Entone Remote Overview

QUICK START