Embed Size (px)
Citation preview
Herramienta ideal para termosellado de lona, velarias y membranas plásticas
El mejor diseño ergonómico.
Más ligera.Mayor flujo de aire.
Fácil cambio de carbones a los lados del mango.Anillo de hule de protección.Regulador de temperatura.
ESPECIFICACIONES
Voltaje: 120 V, 50/60 HZ AC o 220V.Calentamiento: 1300W, 1500W Y 1600 Watts.
Capacidad: Máximo 10 Amps.Salida de aire: 28 mbar.
Temperatura: 20 -700 C (68 – 1290 F). Ajuste de temperatura variable.
Peso: 1.18 kg.Cable: 2.76 m.
Abbeon Cal Inc. Santa Barbara, CA 93101Tel: 800.922.0977 o 805.966.0810 [email protected] www.forsthofftools.com
QUICK SEPistola de aire caliente
Rodillo 50 mmBoquilla plana 40 mm
Rodillo 50 mm
Herramienta ideal para termofusión de placas, contenedores, tinas, tubos y pisos industriales.
El mejor diseño ergonómico.
Más ligera.Mayor flujo de aire.
Fácil cambio de carbones a los lados del mango.Anillo de hule de protección.
Regular de temperatura.
ESPECIFICACIONES
Voltaje: 120 V, 50/60 HZ AC o 220V.Calentamiento: 1300W, 1500W Y 1600 Watts.
Capacidad: Máximo 10 Amps.Salida de aire: 28 mbar.
Temperatura: 20 -700 C (68 – 1290 F). Ajuste de temperatura variable.
Peso: 1.18 kg.Cable: 2.76 m.
QUICK SEPistola de aire caliente
PAQUETE QUICK SE I
Boquilla redonda 5 mmPunta rápida de 3,4 ó 5 mm
Cepillo limpiador
Herramienta ideal para termosellado de lona, velarias y membranas plásticas
El mejor diseño ergonómico.
Más ligera.Mayor flujo de aire.
Fácil cambio de carbones a los lados del mango.Anillo de hule de protección.Regulador de temperatura.
ESPECIFICACIONES
Voltaje: 120 V, 50/60 HZ AC o 220V.Calentamiento: 1300W, 1500W Y 1600 Watts.
Capacidad: Máximo 10 Amps.Salida de aire: 28 mbar.
Temperatura: 20 -700 C (68 – 1290 F). Ajuste de temperatura variable.
Peso: 1.18 kg.Cable: 2.76 m.
Abbeon Cal Inc. Santa Barbara, CA 93101Tel: 800.922.0977 o 805.966.0810 [email protected] www.forsthofftools.com
QUICK SEPistola de aire caliente
Rodillo 50 mmBoquilla plana 40 mm
Rodillo 50 mm
ACCESORIOS
GUÍA
RODILLO 5 MM
RODILLO 45 MM
RODILLO 45 MM ACOLCHONADO
PUNTA RÁPIDA 3,4 Ó 5 MM
PUNTA TRIANGULAR 7.5 MM
RANURADORBOQUILLA PLANA 20 MM
BOQUILLA DE ENCOGIMIENTO
CUCHILLA MEDIA LUNA
Abbeon Cal Inc. Santa Barbara, California 93101Tel: 805.966.0810 800.922.0977 [email protected] www.forsthofftools.com
RODILLO 80 MM
BOQUILLA PLANA 40 MM
BOQUILLA 60, 80 MM
BOQUILLA PLANA 90
BOQUILLA PLANA 45
BOQUILLA REDONDA 5 MM
BOQUILLA SOLDADORA
BOQUILLA PARA APUNTALAR
RODILLO 45 MM ACOLCHONADOCON PROBADOR
ESTUCHE METÁLICO
RANURADOR
RANURADOR DE PISO
Herramienta ideal para termosellado de lona, velarias y membranas plásticas
El mejor diseño ergonómico.
Más ligera.Mayor flujo de aire.
Fácil cambio de carbones a los lados del mango.Anillo de hule de protección.Regulador de temperatura.
ESPECIFICACIONES
Voltaje: 120 V, 50/60 HZ AC o 220V.Calentamiento: 1300W, 1500W Y 1600 Watts.
Capacidad: Máximo 10 Amps.Salida de aire: 28 mbar.
Temperatura: 20 -700 C (68 – 1290 F). Ajuste de temperatura variable.
Peso: 1.18 kg.Cable: 2.76 m.
Abbeon Cal Inc. Santa Barbara, CA 93101Tel: 800.922.0977 o 805.966.0810 [email protected] www.forsthofftools.com
QUICK SEPistola de aire caliente
Rodillo 50 mmBoquilla plana 40 mm
Rodillo 50 mm
Herramienta ideal para fabricación y reparación de tubos, ductos y tanques.
Unidad ligera y fácil de usar.
Regulador de temperatura.
Muy útil para soldado de películas plásticas y fabricación de tanques.
Requiere de sopladora independiente.
ESPECIFICACIONES
120V, 50/60 Hz.1300 W, 120 V.
Temperatura: 20-698CRequerimiento de flujo de aire: 80-250 lt/min.
MINI ELECTRONICSoldadora termoplástica
Herramienta ideal para termosellado de lona, velarias y membranas plásticas
El mejor diseño ergonómico.
Más ligera.Mayor flujo de aire.
Fácil cambio de carbones a los lados del mango.Anillo de hule de protección.Regulador de temperatura.
ESPECIFICACIONES
Voltaje: 120 V, 50/60 HZ AC o 220V.Calentamiento: 1300W, 1500W Y 1600 Watts.
Capacidad: Máximo 10 Amps.Salida de aire: 28 mbar.
Temperatura: 20 -700 C (68 – 1290 F). Ajuste de temperatura variable.
Peso: 1.18 kg.Cable: 2.76 m.
QUICK SEPistola de aire caliente
Rodillo 45 mm con probador de calidadBoquilla plana 40 mm
EstucheCepillo limpiador
PAQ. QUICK SE II
Herramienta ideal para termosellado de lona, velarias y membranas plásticas
El mejor diseño ergonómico.
Más ligera.Mayor flujo de aire.
Fácil cambio de carbones a los lados del mango.Anillo de hule de protección.Regulador de temperatura.
ESPECIFICACIONES
Voltaje: 120 V, 50/60 HZ AC o 220V.Calentamiento: 1300W, 1500W Y 1600 Watts.
Capacidad: Máximo 10 Amps.Salida de aire: 28 mbar.
Temperatura: 20 -700 C (68 – 1290 F). Ajuste de temperatura variable.
Peso: 1.18 kg.Cable: 2.76 m.
Abbeon Cal Inc. Santa Barbara, CA 93101Tel: 800.922.0977 o 805.966.0810 [email protected] www.forsthofftools.com
QUICK SEPistola de aire caliente
Rodillo 50 mmBoquilla plana 40 mm
Rodillo 50 mm
Grand SEPistola de aire caliente
Herramienta ideal de alto rendimiento, ideal para termosellado de membranas de TPO y PVC, así como para
lonas de alto calibre y geomembranas de PE, PP y PVC.
Alta capacidad de calentamientoDispositivo de enfriamiento.
Mango con diseño ergonómico.Alto flujo de aire.
Fácil cambio de carbones a los lados del mango..Regulador de temperatura.
ESPECIFICACIONES
Voltaje: 230 V, 50/60 HZ.Calentamiento: 3000 Watts.
Salida de aire: 28 mbar.Temperatura: 20 -700 C (68 – 1290 F).
Ajuste de temperatura variable.Peso: 1.2 kgs.Cable: 2.76 m.
Boquilla ancha7x10 mm ó 7x4 mm
Herramienta ideal para termosellado de lona, velarias y membranas plásticas
El mejor diseño ergonómico.
Más ligera.Mayor flujo de aire.
Fácil cambio de carbones a los lados del mango.Anillo de hule de protección.Regulador de temperatura.
ESPECIFICACIONES
Voltaje: 120 V, 50/60 HZ AC o 220V.Calentamiento: 1300W, 1500W Y 1600 Watts.
Capacidad: Máximo 10 Amps.Salida de aire: 28 mbar.
Temperatura: 20 -700 C (68 – 1290 F). Ajuste de temperatura variable.
Peso: 1.18 kg.Cable: 2.76 m.
Abbeon Cal Inc. Santa Barbara, CA 93101Tel: 800.922.0977 o 805.966.0810 [email protected] www.forsthofftools.com
QUICK SEPistola de aire caliente
Rodillo 50 mmBoquilla plana 40 mm
Rodillo 50 mm
Herramienta ideal de alto rendimiento, ideal para termosellado de membranas de TPO y PVC, así como para
lonas de alto calibre y geomembranas de PE, PP y PVC.
Alta capacidad de calentamiento Dispositivo de enfriamiento.
Mango con diseño ergonómico. Alto flujo de aire.
Fácil cambio de carbones a los lados del mango..Regulador de temperatura.
ESPECIFICACIONES
Voltaje: 230 V, 50/60 HZ.Calentamiento: 3000 Watts.
Salida de aire: 28 mbar.Temperatura: 20 -700 C (68 – 1290 F).
Ajuste de temperatura variable.Peso: 1.2 kgs.Cable: 2.76 m.
MODELO SEPistola de aire caliente
Rodillo 45 mmBoquilla plana 40 mm
Características
-Funciona como máquina soldadora cercana a la superficie de trabajo.
-Posee un motor y estructura compacta lo cual hace que sea una herramienta de fácil maniobra.-Trabaja muy bien en techos y pisos irregulares por sus 3 puntos de contacto con las superficies.-El dispositivo que mantiene la pistola soldadora
previene que se dañe el material en el que se trabaja.
-Se enciende automáticamente cuando la pistola soldadora se coloca en posición contra la
superficie.-La temperatura es infinitamente
variable hasta 700C.-Cuenta con regulador de temperatura y
velocidad.
Accesorio opcional: doblador de lona
Es una herramienta poderosa de trabajo pesado para lonas, velarias, techos, cortinas y membranas plásticas.
FORPLAST P
Soldadora automática
2 www.forsthoffwelding.com
A legend goes on FORSTHOFF FORPLAST!P2
Model FORPLAST-P2
Voltage 230 V 50/60 Hz
Heat output 20 mm, 30 mm: 2x1700 W 230 V; 40 mm, 45 mm: 2x2000 W 230 V
Temperature 20-700°C, infinitely variable
Weight 17.5 kg with 7 m connection cable
Dimensions 535 x 280 x 350 mm (without guide handle)
NEW
2 www.forsthoffwelding.com www.forsthoffwelding.com 3
The efficient and manoeuvrable hot air automatic welding machine for the truck tarpaulin and adver-tising banner processor.
The automatic welding machine FORPLAST-P2 is the innovative successor of the successful FORPLAST-P models and an efficient and manoeuvrable device for welding truck tarpaulins, tents, awning materials and advertising banners. It produces optionally 20, 30, 40 and 45 mm wide overlap welds and may also be converted for welding in welting ropes.
In addition, by mounting hem welding accessories, the automatic machine can without any difficulty be used for the production of 20 mm, 30 mm, 40 mm and 45 mm hems.
The heat output of up to 4000 W 230 V AC is infi-nitely variable from 20 to 700 °C for an individual adjustment to different materials.
The FORPLAST-P2 starts automatically after the weld head has been swivelled in. In addition, the infinitely variable speed adjustment of the modern generation of motors with their performance of up to 18 m/min., in conjunction with the holding-down device for crease-free welding, makes for an opti-mum welding result. Furthermore, the three-point support ensures a reliable pressure on the tarpaulin.
Thanks to a new generation of nozzles, tarpaulin fabrics can be welded with a speed of up to 11 m/min.
Moreover, the device is equipped with a sturdy car-rying handle and a telescopic guide handle that can be individually adjusted to the user‘s body height.
The manoeuvrable and narrow casing design is optimally suited for using the FORPLAST-P2 in the truck tarpaulin and advertising banner sector.
FORPLAST!P2 HOT AIR AUTOMATIC WELDING
MACHINE
Efficient and manoeuvrable.
Accessories
Item No. 1116P2 Overlap welding nozzle 20 mm
Item No. 12900P2 Overlap welding nozzle 30 mm
Item No. 12910P2 Overlap welding nozzle 40 mm
Item No. 1117P2 Overlap welding nozzle 45 mm
Item No. 3070P2 Heating element 2x1700 W 230 V
Item No. 3071P2 Heating element 2x2000 W 230 V
A legend goes on FORSTHOFF FORPLAST!P2
Item No. 1113P2 Hem welding accessories 20 mm und 30 mm
Item No. 1109P2 Hem welding accessories 40 mm und 45 mm
Item No. 11240P2 Welting pressure roller
Item No. 1091P2 Tape welding kit 50 mm for FORPLAST-P2 50 mm tape welding
EspecificacionesVoltaje: 230V AC, 50 Hz
Capacidad de calentamiento: 3400W ó 4000WTemperatura: 20-700C.
Soldadura: 20, 30 Ó 45 mm.Peso: 17.5 kgs.
Herramienta ideal para termosellado de lona, velarias y membranas plásticas
El mejor diseño ergonómico.
Más ligera.Mayor flujo de aire.
Fácil cambio de carbones a los lados del mango.Anillo de hule de protección.Regulador de temperatura.
ESPECIFICACIONES
Voltaje: 120 V, 50/60 HZ AC o 220V.Calentamiento: 1300W, 1500W Y 1600 Watts.
Capacidad: Máximo 10 Amps.Salida de aire: 28 mbar.
Temperatura: 20 -700 C (68 – 1290 F). Ajuste de temperatura variable.
Peso: 1.18 kg.Cable: 2.76 m.
Abbeon Cal Inc. Santa Barbara, CA 93101Tel: 800.922.0977 o 805.966.0810 [email protected] www.forsthofftools.com
QUICK SEPistola de aire caliente
Rodillo 50 mmBoquilla plana 40 mm
Rodillo 50 mm
ACCESORIOS
Abbeon Cal Inc, Santa Barbara, CA 93101 USATel: 800.922.0977 o 805.966.0810 [email protected] www.forsthofftools.com
BOQUILLA DE 40 Y 45 MM
DOBLADORADISPONIBLE EN 45, 30 Y 20 MM
KIT PARA TERMOSELLADO CON CINTA
BOQUILLA 20 Y 30 MM
KIT PARA TERMOFUSIÓN DE PISOS INDUSTRIALES CON SOLDADURA O CORDÓN2 www.forsthoffwelding.com www.forsthoffwelding.com 3
The efficient and manoeuvrable hot air automatic welding machine for the truck tarpaulin and adver-tising banner processor.
The automatic welding machine FORPLAST-P2 is the innovative successor of the successful FORPLAST-P models and an efficient and manoeuvrable device for welding truck tarpaulins, tents, awning materials and advertising banners. It produces optionally 20, 30, 40 and 45 mm wide overlap welds and may also be converted for welding in welting ropes.
In addition, by mounting hem welding accessories, the automatic machine can without any difficulty be used for the production of 20 mm, 30 mm, 40 mm and 45 mm hems.
The heat output of up to 4000 W 230 V AC is infi-nitely variable from 20 to 700 °C for an individual adjustment to different materials.
The FORPLAST-P2 starts automatically after the weld head has been swivelled in. In addition, the infinitely variable speed adjustment of the modern generation of motors with their performance of up to 18 m/min., in conjunction with the holding-down device for crease-free welding, makes for an opti-mum welding result. Furthermore, the three-point support ensures a reliable pressure on the tarpaulin.
Thanks to a new generation of nozzles, tarpaulin fabrics can be welded with a speed of up to 11 m/min.
Moreover, the device is equipped with a sturdy car-rying handle and a telescopic guide handle that can be individually adjusted to the user‘s body height.
The manoeuvrable and narrow casing design is optimally suited for using the FORPLAST-P2 in the truck tarpaulin and advertising banner sector.
FORPLAST!P2 HOT AIR AUTOMATIC WELDING
MACHINE
Efficient and manoeuvrable.
Accessories
Item No. 1116P2 Overlap welding nozzle 20 mm
Item No. 12900P2 Overlap welding nozzle 30 mm
Item No. 12910P2 Overlap welding nozzle 40 mm
Item No. 1117P2 Overlap welding nozzle 45 mm
Item No. 3070P2 Heating element 2x1700 W 230 V
Item No. 3071P2 Heating element 2x2000 W 230 V
A legend goes on FORSTHOFF FORPLAST!P2
Item No. 1113P2 Hem welding accessories 20 mm und 30 mm
Item No. 1109P2 Hem welding accessories 40 mm und 45 mm
Item No. 11240P2 Welting pressure roller
Item No. 1091P2 Tape welding kit 50 mm for FORPLAST-P2 50 mm tape welding
2 www.forsthoffwelding.com www.forsthoffwelding.com 3
The efficient and manoeuvrable hot air automatic welding machine for the truck tarpaulin and adver-tising banner processor.
The automatic welding machine FORPLAST-P2 is the innovative successor of the successful FORPLAST-P models and an efficient and manoeuvrable device for welding truck tarpaulins, tents, awning materials and advertising banners. It produces optionally 20, 30, 40 and 45 mm wide overlap welds and may also be converted for welding in welting ropes.
In addition, by mounting hem welding accessories, the automatic machine can without any difficulty be used for the production of 20 mm, 30 mm, 40 mm and 45 mm hems.
The heat output of up to 4000 W 230 V AC is infi-nitely variable from 20 to 700 °C for an individual adjustment to different materials.
The FORPLAST-P2 starts automatically after the weld head has been swivelled in. In addition, the infinitely variable speed adjustment of the modern generation of motors with their performance of up to 18 m/min., in conjunction with the holding-down device for crease-free welding, makes for an opti-mum welding result. Furthermore, the three-point support ensures a reliable pressure on the tarpaulin.
Thanks to a new generation of nozzles, tarpaulin fabrics can be welded with a speed of up to 11 m/min.
Moreover, the device is equipped with a sturdy car-rying handle and a telescopic guide handle that can be individually adjusted to the user‘s body height.
The manoeuvrable and narrow casing design is optimally suited for using the FORPLAST-P2 in the truck tarpaulin and advertising banner sector.
FORPLAST!P2 HOT AIR AUTOMATIC W ELDING
MACHINE
Efficient and manoeuvrable.
Accessories
Item No. 1116P2 Overlap welding nozzle 20 mm
Item No. 12900P2 Overlap welding nozzle 30 mm
Item No. 12910P2 Overlap welding nozzle 40 mm
Item No. 1117P2 Overlap welding nozzle 45 mm
Item No. 3070P2 Heating element 2x1700 W 230 V
Item No. 3071P2 Heating element 2x2000 W 230 V
A legend goes on FORSTHOFF FORPLAST!P2
Item No. 1113P2 Hem welding accessories 20 mm und 30 mm
Item No. 1109P2 Hem welding accessories 40 mm und 45 mm
Item No. 11240P2 Welting pressure roller
Item No. 1091P2 Tape welding kit 50 mm for FORPLAST-P2 50 mm tape welding
2 www.forsthoffwelding.com www.forsthoffwelding.com 3
The efficient and manoeuvrable hot air automatic welding machine for the truck tarpaulin and adver-tising banner processor.
The automatic welding machine FORPLAST-P2 is the innovative successor of the successful FORPLAST-P models and an efficient and manoeuvrable device for welding truck tarpaulins, tents, awning materials and advertising banners. It produces optionally 20, 30, 40 and 45 mm wide overlap welds and may also be converted for welding in welting ropes.
In addition, by mounting hem welding accessories, the automatic machine can without any difficulty be used for the production of 20 mm, 30 mm, 40 mm and 45 mm hems.
The heat output of up to 4000 W 230 V AC is infi-nitely variable from 20 to 700 °C for an individual adjustment to different materials.
The FORPLAST-P2 starts automatically after the weld head has been swivelled in. In addition, the infinitely variable speed adjustment of the modern generation of motors with their performance of up to 18 m/min., in conjunction with the holding-down device for crease-free welding, makes for an opti-mum welding result. Furthermore, the three-point support ensures a reliable pressure on the tarpaulin.
Thanks to a new generation of nozzles, tarpaulin fabrics can be welded with a speed of up to 11 m/min.
Moreover, the device is equipped with a sturdy car-rying handle and a telescopic guide handle that can be individually adjusted to the user‘s body height.
The manoeuvrable and narrow casing design is optimally suited for using the FORPLAST-P2 in the truck tarpaulin and advertising banner sector.
FORPLAST!P2 HOT AIR AUTOMATIC WELDING
MACHINE
Efficient and manoeuvrable.
Accessories
Item No. 1116P2 Overlap welding nozzle 20 mm
Item No. 12900P2 Overlap welding nozzle 30 mm
Item No. 12910P2 Overlap welding nozzle 40 mm
Item No. 1117P2 Overlap welding nozzle 45 mm
Item No. 3070P2 Heating element 2x1700 W 230 V
Item No. 3071P2 Heating element 2x2000 W 230 V
A legend goes on FORSTHOFF FORPLAST!P2
Item No. 1113P2 Hem welding accessories 20 mm und 30 mm
Item No. 1109P2 Hem welding accessories 40 mm und 45 mm
Item No. 11240P2 Welting pressure roller
Item No. 1091P2 Tape welding kit 50 mm for FORPLAST-P2 50 mm tape welding
RODILLOS ESPECIALES
