Quick Reference Guide

Aftermarket • KOPkits • Gauges • Dampeners • Pressure Relief Valves

• Tanks • Pre-Engineered Systems • Process Controllers

(PULSAblue, MicroVision)

This guide is designed to provide a simple, easy reference for ordering liquid end components used in many standard configurations. To use this chart, simply use positions 7, 8, 9, 10, 11, 12, and 13 form the model number on your pump. Match these digits to the chart below and follow the line across to determine the part numbers of the liquid end components that you need.

EXAMPLE 1 2 3 4 5 6 7 8 9 10 11 12 13

L P E 4 S A - P H C 1 - X X X

NOTE: This guide provides a quick reference and does not cover all configurations or options.

Liquid End Code

Parts & Accessories

KOPkits When you need a part, you’ve got it. A KOPkit can help you cut downtime and put you back in business fast.

Solution Tanks Available in sizes from 15 to 200 gallon.

Corporation Stop Pulsafeeder’s high quality brass corporation stop and nozzle assembly disperses chemical into the center of a line for even mixing.

SERVICE For unsurpassed service, always contact your authorized Pulsafeeder dealer

Pump Shelf Designed to safely and securely mount your metering pumps on a wall or level surface and contain any potential spills.

Calibration Kit Calibration columns are used on the supply side of the pump to permit flow calibration.

EMP044 I16