BUSINESS SERIES

QUICK INSTALLATION

100BASE-FX MiniGBIC SFP Transceiver, 100BASE-LX MiniGBIC SFP Transceiver

Package ContentsTransceiver

Quick Installation Guide

•

•

Model: MFEFX1, MFELX1

Connect the Transceiver

Insert the MiniGBIC SFP Module with the printed side up and the rubber port cap facing out.

Remove the MiniGBIC SFP Module’s rubber port cap.

Connect the fiber cable’s LC connector to the MiniGBIC SFP Module’s port.

Connect the other end of the cable to an SFP Module to verify that the fiber connection is complete.

The Transceiver’s hardware installation is now complete.

1�

A.

B.

C.

D.

Insert the ModuleInsert the Module

Remove the Rubber Port CapRemove the Rubber Port Cap

Connect the Fiber CableConnect the Fiber Cable

Connected Fiber CableConnected Fiber Cable

Removal Instructions

Press the fiber cable’s connector and pull to remove the fiber cable from the MiniGBIC SFP Module.

Pull the Module’s bail latch down.

Remove the MiniGBIC SFP Module.

WARNING: Optical SFPs use a small laser to generate the fiber‑optic signal. Because invisible laser radiation may be emitted from the aperture of the port when no fiber cable is connected, avoid exposure to laser radiation and do not stare into open apertures. Keep the optical transmit and receive ports covered whenever a cable is not connected to the port.

2�

A.

B.

C.

Remove the Fiber CableRemove the Fiber Cable

Pull the Bail Latch DownPull the Bail Latch Down

Remove the ModuleRemove the Module

24-Hour Technical Support 800-326-7114 (toll-free from US or Canada)

E-mail Support support@linksys.com

Website http://www.linksys.com http://support.linksys.com

For warranty and regulatory information, refer to the User Guide on the website. Additional support is also available via e-mail or by phone.

Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S.. and certain other countries. Copyright © 2006 Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their respective holders.

6110610NC‑RR

International Website http://www.linksys.com/international

RMA (Return Merchandise Authorization) http://www.linksys.com/support

FTP Site ftp://ftp.linksys.com

Sales Information 800-546-5797 (800-LINKSYS)

Switch Compatibility List

Linksys 100M SFP Switch Support and Minimum Software Release Requirements

Switch Model MFEFX1 ‑ 100 SFP MFELX1 ‑ 100 SFP

SRW208G Firmware 1.0.3 Firmware 1.0.3

SRW208L Firmware 1.0.3 Firmware 1.0.3

SRW208P Firmware 1.0.2 Firmware 1.0.3

SRW208MP Firmware 1.0.2 Firmware 1.0.3

SRW2008 Firmware 1.0.2 Firmware 1.0.3

SRW2008P Firmware 1.0.2 Firmware 1.0.3

SRW2008MP Firmware 1.0.2 Firmware 1.0.3

SRW224G4 Firmware 1.2.2 Firmware 1.2.2

SRW248G4 Firmware 1.2.2 Firmware 1.2.2

SRW224G4P Firmware 1.0.1 Firmware 1.0.1

SRW248G4P Firmware 1.0.1 Firmware 1.0.1

SRW2024P Firmware 1.0.3 Firmware 1.0.3

SRW2016 Not Supported Not Supported

SRW2024 Not Supported Not Supported

SRW2048 Not Supported Not Supported

3�