Upload
others
View
11
Download
0
Embed Size (px)
Citation preview
SBS COMPLIMENTARY PRODUCT SOLUTIONS
Base Sheet Membrane Fasteners1.2” BSF Fastener1.7” BSF Fastener
SOPRAFIX® FASTENERS#14 SOPRAFIX Fasteners & Pre-Assembled (1” to 12”)#15 SOPRAFIX Fasteners & Pre-Assembled (1” to 28”)SOPRAFIX 2” seam plateSOPRAFIX 2.4” seam plateSOPRAFIX Metal Batten Bar
TRI-FIXXTRI-FIXX fasteners (nails & plates)
TRI-FIXX GUN Provides efficient and safe installation of TRI-FIXX mechanically attached roofing installations.
ALSAN® FLASHINGA patented polyurethane/bitumen resin, single-component and moisture-curing compound used in SOPREMA roofing and waterproofing flashing applications.
ALSAN® RS 260 LO FLASHALSAN RS 260 LO Flash is a low odor, rapid-curing, proprietary formulation polymethacrylate (PMA) liquid resin. ALSAN RS 260 LO Flash is combined with ALSAN RS Fleece reinforcing fabric to form a flexible and monolithic, reinforced membrane used in SOPREMA roofing and waterproofing flashing applications.
ALSAN® RS 230 FLASHALSAN RS 230 Flash is a rapid-curing, proprietary formulation polymethyl methacrylate (PMMA) liquid resin. ALSAN RS 230 Flash is combined with ALSAN RS Fleece reinforcing fabric to form a flexible monolithic, reinforced membrane used in SOPREMA roofing and waterproofing flashing applications.
COLPLY ADHESIVE VOC compliant, polymer modified cold process membrane adhesive for use with SOPREMA SBS-modified bitumen membranes.
COLPLY MODIFIED ADHESIVE VOC compliant, premium polymer modified cold process membrane adhesive.
COPLY EF ADHESIVEIdeal when odor and solvent must be eliminated from the jobsite. COLPLY EF Adhesive is a low odor, single-component polymer modified membrane adhesive specifically formulated for SOPREMA sand-surfaced SBS-modified bitumen plies. Upon curing, COLPLY EF provides additional layers of elastomeric waterproofing protection between plies.
COLPLY FLASHING CEMENTVOC compliant asphalt roofing flashing cement, specifically formulated for SOPREMA sand-surfaced modified bitumen flashing plies.
COPLY MODIFIED FLASHING CEMENTVOC compliant premium polymer modified cold process flashing cement. Required for use with SOPRASTAR sanded cap sheet.
COPLY EF FLASHING CEMENTIdeal when odor and solvent must be eliminated from the jobsite. COLPLY EF is a low odor, single-component polymer modified flashing cement specifically formulated for SOPREMA sand-surfaced SBS-modified bitumen plies.
SOPRAMASTIC SBS ELASTIC CEMENTSolvent and SBS-modified bitumen based mastic ideal for use with bituminous roofing and waterproofing membranes as seam mastic, caulking material, and joint filler.
SOPRAMASTIC SP1A solvent-free, extremely low VOC, moisture curing sealant designed for applications where joint movement is necessary. SP-1 will not shrink upon curing, will not discolor when exposed to UV light, and creates a tight seal between dissimilar materials.
DUOTACK® 365Low-rise, two-part urethane insulation adhesive. DUOTACK 365 is used to adhere insulation boards to various substrates, adhering multiple layers of insulation boards, and various cover boards including SOPRABOARD.
ELASTOCOL 350Low VOC, water-based primer to prepare surfaces before the installation of thermofusible membranes.
ELASTOCOL 500Fast drying, solvent-based asphalt primer for heat welding, hot asphalt and cold-adhesive membrane applications.
ELASTOCOL STICKSolvent based, high-tack primer designed for self-adhered membrane applications.
ELASTOCOL STICK ZEROVOC compliant, high-tack primer designed for self-adhered membrane applications.
ELASTOCOL STICK H2OPolymer emulsion-based primer designed for self-adhered membrane applications.
SOPRABOARD®
SOPRASMARTTM BOARD 180SBS modified bitumen membrane with a non-woven polyester reinforcement, factory laminated on a semi-rigid asphaltic board.
SOPRASMARTTM ISO HD 180SBS modified bitumen membrane with a non-woven polyester reinforcement, factory laminated to a high density polyisocyanurate insulation board.
SOPRASMARTTM XP HD SBS modified bitumen membrane with a non-woven polyester reinforcement, factory laminated on a high-density mineral wool panel.
SOPRASMARTTM XP ISO SBS modified bitumen membrane with a non-woven polyester reinforcement factory-laminated to a mineral wool and polyisocyanurate insulation panel.
Premium, lightweight, high strength, semi-rigid asphalt-based cov-erboard. SOPRABOARD is dimensionally stable, is not susceptible to high moisture conditions, and the bituminous surface provides an ideal substrate for monolithic adhesion to SBS membranes.
C O V E R B O A R D P R I M E R S
A D H E S I V E S , C E M E N T S , & S E A L A N T S
F A S T E N E R S
A C C E S S O R I E S
L A M I N A T E D C O V E R B O A R D
SOPRAVAP’RSelf-adhered, SBS-modified bitumen vapor barrier protected by a tri-laminate woven polyethylene top surface. SOPRALENE 180 PS 2.2SBS modified bitumen sheet with a sanded bottomand a thermoplastic film on top.
SOPRALENE 180 SANDEDSBS modified bitumen sheet with a polyesterreinforcement and sanded top and bottom.
MODIFIED SOPRA GPolymer modified fiberglass base sheet meeting and/or exceeding ASTM 4601, Type II and G2 standards. Modified SOPRA G is used as an anchor sheet for heat welded, cold adhesive, or hot applied roofing and waterproofing assemblies.
SOPRA-ISOClosed cell polyisocyanurate foam core bonded to organic reinforced facers.
SOPRA-ISO+Closed cell polyisocyanurate foam core bonded to inorganic coated glass fiber reinforced facers.
SOPRAROCK DDRigid mineral wool support panel with duel density technol-ogy; high density upper surface provides rigid substrate.
SOPRAROCK DD PLUSRigid mineral wool support panel with duel density technol-ogy; bitumen impregnated high density upper surface provides rigid substrate.
S B S V A P O R R E T A R D E R
I N S U L A T I O N
L I Q U I D A P P L I E D F L A S H I N G S
SOPRAJOINTSBS-modified bitumen expansion joint membrane for use in approved multi-ply membrane assemblies.
SOPRASPHALTSEBS-modified asphalt used to adhere SBS-modified bitumen membranes.
SOPRALAPSBS-modifed bitumen cover strip designed to seal the end laps of SOPREMA products.
SOPRASLOPEAcrylic modified cementicious sloping material designed to create positive slop on traditional low slope roofs. SS
1000
4-RE
V. 7.
2018
QUICK GUIDE WAT
ERPR
OOFI
NG
ROOFINGSBS MODIFIED BITUMEN MEMBRANES
CAP PLY OPTIONS
CAP APPLICATION METHOD CAP PLY PRODUCT ASTM STANDARDELASTOPHENE® FR GR
ASTM D6163ELASTOPHENE® HR FR GR
SOPRALENE® 180 FR GRASTM D6164
SOPRALENE® 250 FR GR
SOPRASTAR® SandedASTM D6162
ELASTOPHENE® HS FR GR
CAP APPLICATION METHOD CAP PLY PRODUCT ASTM STANDARDELASTOPHENE® Flam FR GR
ASTM D6163ELASTOPHENE® Flam HR FR GR
SOPRALENE® Flam 180 FR GRASTM D6164
SOPRALENE® Flam 250 FR GR
SOPRASTAR® Flam ASTM D6162
ELASTOPHENE® Flam HS FR GR
CAP APPLICATION METHOD CAP PLY PRODUCT ASTM STANDARDELASTOPHENE® FR GR
ASTM D6163ELASTOPHENE® HR FR GR
SOPRALENE® 180 FR GRASTM D6164
SOPRALENE® 250 FR GR
SOPRASTAR® SandedASTM D6162
ELASTOPHENE® HS FR GR
CAP APPLICATION METHOD CAP PLY PRODUCT ASTM STANDARD
ELASTOPHENE® Stick FR GR
ASTM D6163
ELASTOPHENE® Stick HR FR GR
BASE PLY OPTIONS
BASE APPLICATION METHOD BASE PLY PRODUCT ASTM STANDARD CAP APPLICATION METHODSELASTOPHENE® Sanded
ASTM D6163ELASTOPHENE® HR Sanded
SOPRALENE® 180 SandedASTM D6164
SOPRALENE® 250 Sanded
ELASTOPHENE® HS Sanded ASTM D6162
BASE APPLICATION METHOD BASE PLY PRODUCT ASTM STANDARD CAP APPLICATION METHODSCOLVENT® TG ASTM D6163
ELASTOPHENE® SP
SOPRALENE® 180 SPASTM D6164
COLVENT® 180 TG
ELASTOPHENE® Flam HRASTM D6163
COLVENT® Flam TG
SOPRALENE® Flam 180
ASTM D6164SOPRALENE® Flam 250
COLVENT® Flam 180 TG
ELASTOPHENE® Flam HS ASTM D6162
BASE APPLICATION METHOD BASE PLY PRODUCT ASTM STANDARD CAP APPLICATION METHODS
ELASTOPHENE® SandedASTM D6163
ELASTOPHENE® HR Sanded
SOPRALENE® 180 SandedASTM D6164
SOPRALENE® 250 Sanded
ELASTOPHENE® HS Sanded ASTM D6162
BASE APPLICATION METHOD BASE PLY PRODUCT ASTM STANDARD CAP APPLICATION METHODS
SOPRAFIX® Base 612
ASTM D6164
SOPRAFIX® Base 613
SOPRAFIX® Base 614
SOPRAFIX® Base 622
SOPRAFIX® Base 641
BASE APPLICATION METHOD BASE PLY PRODUCT ASTM STANDARD CAP APPLICATION METHODSCOLVENT® SA
ASTM D6163ELASTOPHENE® Stick
SOPRALENE® StickASTM D6164
COLVENT® 180 SA
COLVENT® Flam SAASTM D6163
ELASTOPHENE® Flam Stick
SOPRALENE® Flam StickASTM D6164
COLVENT® Flam 180 SA
COLD ADHESIVE
HEAT WELDED
HOT ASPHALT
MECHANICALLY FASTENED
SELF-ADHERED
SBS MEMBRANE SYSTEMSBASE & CAP PLY OPTIONS
REINFORCEMENTS
A S T MS T A N D A R D
D E S C R I P T I O N T Y P E A N D G R A D E
ASTM D6163Standard Specification for SBS Modified
Bitumen Sheet Materials using Glass Fiber Reinforcements
Grade S or GType I, Type II
ASTM D6164Standard Specification for SBS Modified Bitumen Sheet Materials using Polyester
Reinforcements
Grade S or GType I,Type II
ASTM D6162
Standard Specification for SBS Modified Bitumen Sheet Materials using a
combination of Polyester & Glass Fiber Reinforcement
Grade S or GType I, Type III
ELASTOPHENE FR+ GR & SOPRALENE 180 FR+ GR
ELASTOPHENE FR GR & SOPRALENE 180 FR GR
ELASTOPHENE LS FR GR
Up to 2:12
Up to 1:12
Up to ½:12
COLD ADHESIVE
HEAT WELDED
HOT ASPHALT
SELF-ADHERED
SRI Initial: 82SRI 3 Yr: 67
What is a cool roof? It’s one that reflects and emits the sun’s heat back to the sky instead of transferring it to the building below, thus reducing energy consumption. The greater the roof’s reflectivity, the cooler the rooftop, hence keeping the building’s interior cooler. SOPREMA SOPRASTAR and SG membranes are listed by the Cool Roof Ratings Council and meet and exceed cool roof standards including EPA ENERGY STAR®, California Title 24, and LEED.
Unique fire resistant SBS-modified bitumen formulations, combined with proprietary membrane design, allow SOPREMA to achieve fire classifications unmatched in the roofing industry.
Cap sheet membranes covered with highly reflective white granules.
Cap sheet membrane with a composite rein-forcement and coated with a highly reflective white multilayer film.
Advantages over coated membranes:• No re-coating every few years to maintain reflectivity• Long-lasting protection• Comprehensive warranty• High tear resistance• Retention of high reflectivity and whiteners• Superior dirt pick-up resistance• Easy maintenance
SG GRANULE SURFACED MEMBRANES
SOPRASTAR MEMBRANE WITH TRILAMINATE WHITE FILM
SRI Initial: 88SRI 3 Yr: 85
CAP MEMBRANE GRANULE COLOR CHARTFIRE RETARDANT
HIGH TENSILE RESISTANCE
GRANULATED/SURFACED
TORCH GRADE
HIGH STRENGTH
SELF-ADHERED
ENVIRONMENTALLY FRIENDLY
Standard Stock Colors
Specialty Colors
WH (White) GY (Grey Blend)
BK (Black)
TN (Tan)
BN (Brown)SI (Sienna Blend)
*SOPRASTAR fire rated (FR) up to 3:12 cap sheet available
PRO
DU
CT T
YPE
DEF
INIT
ION
S
REFLECTIVE ROOFING MEMBRANESFIRE RETARDANT OPTIONS
SAEF