QUESTION EXCERPT

1. ALWAYS EXAMINE THE TOOL FOR TAMAGES BEFORE USE

A TRUE

B FALCE

• 2. It is OK to wear loose clothing, dangling objects and jewellery using hand tool.

• A. True

• B. False

• 3. Keep cords and hoses away from heat, oil and sharp edges.

• A. True

• B. False

• 4. Use only tools and equipment in good condition.

• A. True

• B. False

• 5. It is OK to make adjustments or clear a jam while the power tool is running.

• A. True

• B. False

• 6. If any tool breaks or malfunctions, report it to your supervisor immediately.

• A. True

• B. False

• 7. Before connecting to a power source, make sure the power is on.

• A. True

• B. False

• 8. Safety glasses shall always be worn whenever you are using power hand tool.

• A. True

• B. False

• 9. There are several types of power tools, including electric, pneumatic, hydraulic.

• A. True

• B. False

• 10. Never use electric tools in wet conditions.

• A. True

• B. False

• 11. When not in use, power tools should be disconnected.

• A. True

• B. False

• 12. Keep safe distance between your hands and all moving parts of the power tool.

• A. True

• B. False

• 13. Don’t leave a power tool unattended while it is running.

• A. True

• B. False

• 14. It is OK to startle someone who is using a power tool.

• A. True

• B. False

• 15. Use safety guards exactly as they are supposed to be used.

• A. True

• B. False

• 16. When tightening a nut with an adjustable wrench, always pull the wrench toward you; never push the wrench away from you.

• A. True

• B. False

• 17. Plastic covered handles on wire-cutting pliers may be used to cut low-voltage live electrical wire.

• A. True

• B. False

• 18. Screwdrivers may be used for purposes other than driving or removing screws, for example as a chisel.

• A. Ture

• B. False

• 19. When selecting a standard screwdriver be certain that the tip is almost as thick and as wide as the slot of the head of a screw.

• A. True

• B. False

• 20. When using a hacksaw, safety glasses must be worn.

• A. True

• B. False

• 21. When you are finished using a hacksaw, tension should be eased.

• A. True

• B. False