Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Quantum® Windows & Doors Series
ARCHITECTURAL DESIGN MANUAL
IIIII
Index
AWNING WINDOW
FeaturesandBenefits 01
Installation 05
CrossSectionalViews 13
CASEMENT WINDOW
FeaturesandBenefits 21
Installation 25
CrossSectionalViews 33
SLIDING WINDOW
FeaturesandBenefits 41
Installation 45
CrossSectionalViews 53
SASHLESS DOUBLE HUNG WINDOW
FeaturesandBenefits 61
Installation 63
CrossSectionalViews 71
LOUVRE WINDOW
FeaturesandBenefits 75
Installation 79
Cross Sectional Views 87
BIFOLD WINDOW
FeaturesandBenefits 93
Installation 97
CrossSectionalViews 105
SLIDING DOOR
FeaturesandBenefits 109
Installation 113
CrossSectionalViews 125
SLIDING STACKER DOOR
FeaturesandBenefits 135
Installation 139
CrossSectionalViews 155
BIFOLD DOOR
FeaturesandBenefits 161
Installation 163
CrossSectionalViews 165
HINGE DOOR
FeaturesandBenefits 187
Installation 191
CrossSectionalViews 207
CARE & MAINTENANCE 217
Note: Hardware displayed in images may vary from state to state due to supplier
availability.Trend® Windows & Doors Pty Ltd reserve the right to make changes to
products(s) without notices.
Confidentiality Notice: This document and the information it contains are copyright and
confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in
any form whatsoever, except as authorised by Trend® Windows & Doors in writing, are
strictly prohibited. Patents and Design Registrations pending.
Trend® Windows & Doors | Design Manual | Q-Mk-1 | 2014
Please note that drawings displayed in this document are not to scale
1 2
Quantum® Awning Window
Features & Benefits
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend®
Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
43Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
Awning Window - Features & BenefitsAwning Window - Features & Benefits
SECURITY
• Awning windows come standard with key lockable scissor arm winder.
• 100mm child-safe window opening restrictor is available.• Optional Prowler Proof security screens available.
BUSHFIRE
FRAME
• Robust 102mm semi commercial aluminium window frame - ideal for larger window applications.
SASH
• 62mm wide window sash section.• Sash protected from the weather by a continuous
hinge hood.• Head, sill and jamb rails all have flat infill for clean
lines.
SILL
• Modern sill provides a clean appearance from the inside and the outside. Awning window can be coupled to large fixed lite windows.
GLAZING & ENERGY EFFICIENCY
• All Trend® Windows and Doors comply with Australian Standards AS1288.
• Glazing options from 4mm single glazed to 24mm insulated glazed units (IGUs).
• Energy efficiency options available to help reduce home energy consumption.
• All glazing options are Window Energy Rating Scheme (WERS) rated - providing a wide range of energy efficient solutions.
ACOUSTICS
• Acoustic solutions available for improved noise reduction
• High Rw ratings available .
WIND & WATER RATINGS
• All Trend® Windows and Doors comply with Australian Standards AS2047 and are designed to meet and surpass 700Pa wind velocity rating and 150Pa water penetration rating.
• Pascal deflection rates up to 2200Pa.• Awning window rated at an air infiltration of 0.16L/s m2
(below the the National Construction Code (NCC) for Air conditioned spaces of 1.00L/s m2) perfect for both air conditioned and non-air conditioned spaces.
• Xtreme® Bushfire Protection option available.
• Xtreme® options have been tested by CSIRO to meet BAL-40 - compliant to AS1530.8.1 within Australian Standards AS3959-2009.
HARDWARE
• High performance key lock scissor action winder mechanism.• Infinity Satin Chrome hardware comes standard on awning
windows. • Optional colours available:
- Pearl White- Stone Beige- Anodic Natural Matt- Gloss Black
• For frames higher than 1499mm and/or wider than 1201mm, side cam lock is standard.
• Window locks can be keyed alike to other Quantum® products for ease of use.
OPTIONS
• Glazing options also available in bar layout styles:- Colonial- Federation - Ovolo glazing bar style*
• Wide range of powder coated colours.• Easy to fit and remove flyscreens available.• Customised WERS ratings.• Variety of sizes and custom made options available (including bay
window styles).• Variety of configuration options available.
*Ovoloonlyavailableinsingleglazing..
DELIVERY
• Protective wrapping for delivery to site comes standard for all Quantum® products.
Note:Careshouldbetakenwhenplacingawningwindownearpedestrianaccess.
5 6
Quantum® Awning Window
Installation
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend®
Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
87Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
Building In Detail | Brick Veneer - 240mm wall
Awning Window - InstallationBuilding In Detail | Double Brick - 280mm wall
Awning Window - Installation
INSTALLING FRAME CORRECTLY
• Fit flashing to window surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 60mmWidth = Frame Size + 60mm
• Secure aluminum windows by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Sill bricks should be at least 10mm clear of window frame to allow settlement in brick veneer construction.
• Header beam should be at least 12mm clear of window frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of window, install sill support (refer to drawings below).
INSTALLING FRAME CORRECTLY
• Fit flashing to window surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Brick Opening:Height = Frame Size + 3mmWidth = Frame Size + 3mm
• Secure aluminum windows by using building lug - fixing at 450mm maximum centres.
• Sill bricks should be at least 10mm clear of window frame to allow settlement in brick veneer construction.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
OUTSIDE
SOFFIT LININGTIMBER REVEAL
HEADER12mm CLEARANCE
TIMBER ARCHITRAVE BY BUILDER
FIXINGS AT 450mm CENTRES
PACKING BY BUILDER
FLASHINGBY BUILDER
BRICK SILLSILL PLATE
SILL SUPPORTBY BUILDER
QUAD BYBUILDER
10mm CLEARANCEBETWEEN SOFFIT LINING AND WINDOW HEAD
10mm MINIMUM CLEARANCE BETWEEN SILL BRICK AND WINDOW SILL WHERE TIMBER FRAME IS USED
FRA
ME
SIZE
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 6
0mm
TIMBER REVEAL
HEAD
101.6
25
SILL
101.6
25
STUD OPENING = FRAME SIZE + 60mm
FRAME SIZE
FLA
SHIN
G B
Y B
UIL
DER
BR
ICK
WO
RK
TIM
BER
REV
EAL
STU
DST
UD
JAM
B
101.6
25
FIXI
NG
S AT
45
0mm
CEN
TRES
PAC
KIN
G B
Y B
UIL
DER
FLASHINGBY BUILDER
NO PACKING
SILL FLAP
BRICKWORK BRICKWORK
BRICKWORK
FLASHING BY BUILDER
BRICK SILL
FLASHING BY BUILDER
STEEL LINTEL BY BUILDER
ALUMINIUM ANGLE AND FIXING BY BUILDER
FRA
ME
SIZE
BR
ICK
OPE
NIN
G =
FR
AM
E SI
ZE +
3m
m
101.6
25
HEAD
CEM
ENT R
END
ERC
EMEN
T REN
DER
SILL
BR
ICK
WO
RK
BU
ILD
ING
IN L
UG
S AT
450m
m C
ENTR
ESFL
ASH
ING
BY
BU
ILD
ER
FRAME SIZE
STO
RM
MO
ULD
BY
TREN
D O
PTIO
NA
L
CEMENT RENDER
BR
ICK
WO
RK
101.6
JAM
B
25
101.6
25
OUTSIDE
SILL FLAP
BRICK OPENING = FRAME SIZE + 3mm
109Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
Building In Detail | Cladding on Studs
Awning Window - Installation
INSTALLING FRAME CORRECTLY
• Fit flashing to window surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 60mmWidth = Frame Size + 60mm
• Secure aluminum windows by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Header beam should be at least 12mm clear of window frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
INSTALLING FRAME CORRECTLY
• Fit flashing to window surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Brick Opening:Height = Frame Size + 3mmWidth = Frame Size + 3mm
• Secure aluminum windows by using building lug - fixing at 450mm maximum centres.
• Sill bricks should be at least 10mm clear of window frame to allow settlement in brick veneer construction.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
Building In Detail | Double Brick - 280mm wall | Prepared Opening
Awning Window - Installation
BRICKWORK BRICKWORK
BRICKWORK
FLASHING BY BUILDER
BRICK SILL
FLASHING BY BUILDER
STEEL LINTEL BY BUILDER
ALUMINIUM ANGLE AND FIXING BY BUILDER
BR
ICK
OPE
NIN
G =
FR
AM
E SI
ZE +
3m
m
FRA
ME
SIZE
101.6
25
HEAD
CEM
ENT R
END
ERC
EMEN
T REN
DER
SILL
101.6
25
OUTSIDE
SILL FLAP
BR
ICK
WO
RK
FLA
SHIN
G B
Y B
UIL
DER
FRAME SIZE
STO
RM
MO
ULD
BY
TREN
D O
PTIO
NA
L
CEMENT RENDERB
UIL
DIN
G IN
LU
GS
BUILDING IN LUGS
BR
ICK
WO
RK
BRICK OPENING = FRAME SIZE + 3mm
101.6
JAM
B
25
FIXI
NG
AT
450m
m C
ENTR
ES
FIXING AT450mm CENTRES
TIMBER REVEAL
TIMBER REVEAL
HEADER
WALL CLADDING
DRESS SARKING INTO CLADDING "U" TRIM AT HEAD AS SHOWN
NO PACKING
FLASHING BY BUILDER
FRA
ME
SIZE
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 6
0mm
12mm CLEARANCE
TIMBER ARCHITRAVE BY BUILDER
SILL PLATE
FLASHING BY BUILDER
ALUMINIUM OR VINYLWALL CLADDING
101.6
25
HEAD
101.6
SILL 25
TIM
BER
REV
EAL
STU
D
WALL CLADDING
FLA
SHIN
G B
Y B
UIL
DER
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
CA
ULK
ING
101.6
JAM
B
25
FIXI
NG
S AT
45
0mm
CEN
TRES
PAC
KIN
G B
Y B
UIL
DER
PACKING BY BUILDER
FIXINGS AT 450mm CENTRES
OUTSIDE
SILL FLAP
1211Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
Building In Detail | Hebel Power Panel
INSTALLING FRAME CORRECTLY
• Fit flashing to window surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 60mmWidth = Frame Size + 60mm
• Secure aluminum windows by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Caulk between render and frame.• Header beam should be at least 12mm clear of
window frame.• Do not permit weight of eaves or arch bars to bear
on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of windows, install sill support (refer to drawings below).
Awning Window - InstallationAwning Window - InstallationBuilding In Detail | Blockwork
INSTALLING FRAME CORRECTLY
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Blockwork Opening:Height = Frame Size + 80mmWidth = Frame Size + 20mm
• Fit subframe to opening and seal fixings.• Seal ends of subsill with angle.• Fit window to subframe (screw or pop-rivet).• Do not permit weight of eaves or arch bars to bear
on any window or door frame. (Windows and doors are not load bearing.)
OUTSIDE
55
SUBSILL
RENDER BY BUILDER
SILL
HEAD
SUBHEAD
BLOCKWORK(SEALED OR PRETREATED BY BUILDER
AS PER BLOCKWORK SUPPLIER’S SPECIFICTION - TO PREVENT WATER PENETRATION)
FIXING 450 CENTRES
PACKERSEALANT
FIXING 450 CENTRES
FIXING 450 CENTRES
SEALANT
FRA
ME
SIZE
BLO
CK
WO
RK
OPE
NIN
G =
FR
AM
E H
EIG
HT
+ 80
mm
PACKERSEALANT
JAM
B
BLO
CK
WO
RK
(SEA
LED
OR
PR
ETR
EATE
D B
Y B
UIL
DER
AS
PER
BLO
CK
WO
RK
SU
PPLI
ER’S
SPE
CIF
ICTI
ON
- TO
PR
EVEN
T W
ATER
PEN
ETR
ATIO
N)
FRAME SIZE
BLOCKWORK OPENING = FRAME SIZE + 20mm
FIXI
NG
450
CEN
TRES
AN
GLE
TR
IM B
Y B
UIL
DER
FIXI
NG
450
CEN
TRES
REN
DER
BY
BU
ILD
ER
REN
DER
BY
BU
ILD
ER
101,6
101,6
39
101,
6OUTSIDE
TIMBER REVEAL
FLASHINGBY BUILDER
HEBEL POWER PANEL
SILL SUPPORTBY BUILDER
SILL PLATE
NO PACKING12mm CLEARANCE
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 6
0mm
FRA
ME
SIZE
10mm CLEARANCEBETWEEN SOFFIT LINING AND WINDOW HEAD
QUAD BYBUILDER
SOFFIT LINING
TIMBER ARCHITRAVEBY BUILDER
TIMBER REVEAL
FLASHINGBY BUILDER
HEADER
PACKINGBY BUILDER
FIXINGS AT450mm CENTRES
25
101,6
101,6
25
HEAD
HEB
EL P
OW
ER P
AN
EL
FLA
SHIN
G B
Y B
UIL
DER
STU
DST
UD
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
PAC
KIN
GB
Y B
UIL
DER
FIXI
NG
S AT
450m
m C
ENTR
ES
TIM
BER
REV
EAL
101,6
25
JAM
B
SILL
13 14
Quantum® Awning Window
Cross Sectional Views
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend®
Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
1615Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
Awning Window - Cross Sectional ViewSingle Lite
Awning Window - Cross Sectional ViewTwo Lite | Transom | Elevation
62.0
62.0
62.0
42.0
42.0
42.0
101.6 101.6
28.6 28.6
38.9
38.9
25.0
25.0
25.0
13.0
13.0
13.0
51.7 36.0
13.0
13.0
28.3
28.3
28.3
13.0
outside
outside
outside
outside
1817Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
Awning Window - Cross Sectional ViewTwo Lite | Transom | Plan
62.0
42.0
25.0
25.025.0
13.0
13.013.0
51.7 36.0
13.0
13.0
28.3
13.0
outside outside
Awning Window - Cross Sectional ViewTwo Lite | Transom | Double Glazed
62.0
42.0
25.0
25.0
25.0
13.0
13.0
13.0
51.7 36.0
13.0
13.0
28.3
13.0
outside outside
2019Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
Awning Window - Cross Sectional ViewOvolo
62.0
62.0
42.0 42.0
101.6 101.6
28.6 28.6
38.9
38.9
28.3
20.3
20.3
28.3
outside outside
Awning Window - Cross Sectional ViewTwo Lite | Transom | Double Glazed
62.0
42.0
25.0
25.025.0
13.0
13.013.0
51.7
36.0
13.0 13.0
28.3
13.0
outside outside
21 22
Quantum® Casement Window
Features & Benefits
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend®
Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
2423Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
Casement Window - Features & BenefitsCasement Window - Features & Benefits
SECURITY
• High performance key lockable dual arm winder for security.• 100mm child-safe window opening restrictor available.• Optional Prowler Proof security screens available.
BUSHFIRE
• Xtreme® Bushfire Protection option available.
• Xtreme® options have been tested by CSIRO to meet BAL-40 - compliant to AS1530.8.1 within Australian Standards AS3959-2009.
HARDWARE
• High performance key lock scissor action winder mechanism.• Infinity Satin Chrome hardware comes standard on casement
windows.• Optional colours available:
- Pearl White- Stone Beige- Anodic Natural Matt- Gloss Black
• Side latch handle operates by a 180º rotation from the open to close position, concealed within the window frame.
• Window locks can be keyed alike to other Quantum® products for ease.
OPTIONS
• Glazing options also available in bar layout styles:- Colonial- Federation - Ovolo glazing bar style*
• Wide range of powder coating colours.• Easy to fit and remove flyscreens available• Customised WERS ratings.• Variety of sizes and custom made options available (including
Bay window styles).• Variety of configuration options available.
*Ovoloonlyavailableinsingleglazing.
DELIVERY
• Protective wrapping for delivery to site comes standard for all Quantum® products.
Note:Careshouldbetakenwhenplacingcasementwindownearpedestrianaccess.
FRAME
• Robust 102mm semi commercial aluminium window frame - ideal for larger window applications.
SASH
• 62mm wide window sash section.• Head, sill and jamb rails all have flat infill for clean lines.• Window design allows for 90º angle opening.
SILL
• Modern sill provides a clean appearance from the inside and the outside. Casement window can be coupled to large fixed lite windows.
GLAZING & ENERGY EFFICIENCY
• All Trend® Windows and Doors comply with Australian Standards AS1288.
• Glazing options from 4mm single glazed to 24mm insulated glazed units (IGUs).
• Energy efficiency options available to help reduce home energy consumption.
• All glazing options are Window Energy Rating Scheme (WERS) rated - providing a wide range of energy efficient solutions.
ACOUSTICS
• Acoustic solutions available for improved noise reduction
• High Rw ratings available.
WIND & WATER RATINGS
• All Trend® Windows and Doors are designed to meet and surpass 700Pa wind velocity rating and 150Pa water penetration rating and comply with Australian Standards AS2047.
• Pascal deflection rates up to 2200Pa.• Casement window rated at an air infiltration of 0.16L/s
m2 (below the the National Construction Code (NCC) for Air conditioned spaces of 1.00L/s m2) perfect for both air conditioned and non-air conditioned spaces.
25 26
Quantum® Casement Window
Installation
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend®
Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
2827Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
Building In Detail | Brick Veneer - 240mm wall
Casement Window - InstallationBuilding In Detail | Double Brick - 280mm wall
Casement Window - Installation
INSTALLING FRAME CORRECTLY
• Fit flashing to window surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 60mmWidth = Frame Size + 60mm
• Secure aluminum windows by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Sill bricks should be at least 10mm clear of window frame to allow settlement in brick veneer construction.
• Header beam should be at least 12mm clear of window frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of window, install sill support (refer to drawings below).
INSTALLING FRAME CORRECTLY
• Fit flashing to window surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Brick Opening:Height = Frame Size + 3mmWidth = Frame Size + 3mm
• Secure aluminum windows by using building lug - fixing at 450mm maximum centres.
• Sill bricks should be at least 10mm clear of window frame to allow settlement in brick veneer construction.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
OUTSIDE
SOFFIT LININGTIMBER REVEAL
HEADER12mm CLEARANCE
TIMBER ARCHITRAVE BY BUILDER
FIXINGS AT 450mm CENTRES
PACKING BY BUILDER
FLASHINGBY BUILDER
BRICK SILLSILL PLATE
SILL SUPPORTBY BUILDER
QUAD BYBUILDER
10mm CLEARANCEBETWEEN SOFFIT LINING AND WINDOW HEAD
10mm MINIMUM CLEARANCE BETWEEN SILL BRICK AND WINDOW SILL WHERE TIMBER FRAME IS USED
FRA
ME
SIZE
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 6
0mm
TIMBER REVEAL
HEAD
101.6
25
SILL
101.6
25
STUD OPENING = FRAME SIZE + 60mm
FRAME SIZE
FLA
SHIN
G B
Y B
UIL
DER
BR
ICK
WO
RK
TIM
BER
REV
EAL
STU
DST
UD
JAM
B
101.6
25FI
XIN
GS
AT
450m
m C
ENTR
ES
PAC
KIN
G B
Y B
UIL
DER
FLASHINGBY BUILDER
NO PACKING
SILL FLAP
BRICKWORK BRICKWORK
BRICKWORK
FLASHING BY BUILDER
BRICK SILL
FLASHING BY BUILDER
STEEL LINTEL BY BUILDER
ALUMINIUM ANGLE AND FIXING BY BUILDER
FRA
ME
SIZE
BR
ICK
OPE
NIN
G =
FR
AM
E SI
ZE +
3m
m
101.6
25
HEAD
CEM
ENT R
END
ERC
EMEN
T REN
DER
SILL
BR
ICK
WO
RK
BU
ILD
ING
IN L
UG
S AT
450m
m C
ENTR
ESFL
ASH
ING
BY
BU
ILD
ER
FRAME SIZE
STO
RM
MO
ULD
BY
TREN
D O
PTIO
NA
L
CEMENT RENDER
BR
ICK
WO
RK
101.6
JAM
B
25
101.6
25
OUTSIDE
SILL FLAP
BRICK OPENING = FRAME SIZE + 3mm
3029Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
TIMBER REVEAL
TIMBER REVEAL
HEADER
WALL CLADDING
DRESS SARKING INTO CLADDING "U" TRIM AT HEAD AS SHOWN
NO PACKING
FLASHING BY BUILDER
FRA
ME
SIZE
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 6
0mm
12mm CLEARANCE
TIMBER ARCHITRAVE BY BUILDER
SILL PLATE
FLASHING BY BUILDER
ALUMINIUM OR VINYLWALL CLADDING
101.6
25
HEAD
101.6
SILL 25
TIM
BER
REV
EAL
STU
D
WALL CLADDING
FLA
SHIN
G B
Y B
UIL
DER
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
CA
ULK
ING
101.6
JAM
B
25
FIXI
NG
S AT
45
0mm
CEN
TRES
PAC
KIN
G B
Y B
UIL
DER
PACKING BY BUILDER
FIXINGS AT 450mm CENTRES
OUTSIDE
SILL FLAP
BRICKWORK BRICKWORK
BRICKWORK
FLASHING BY BUILDER
BRICK SILL
FLASHING BY BUILDER
STEEL LINTEL BY BUILDER
ALUMINIUM ANGLE AND FIXING BY BUILDER
BR
ICK
OPE
NIN
G =
FR
AM
E SI
ZE +
3m
m
FRA
ME
SIZE
101.6
25
HEAD
CEM
ENT R
END
ERC
EMEN
T REN
DER
SILL
101.6
25
OUTSIDE
SILL FLAP
BR
ICK
WO
RK
FLA
SHIN
G B
Y B
UIL
DER
FRAME SIZE
STO
RM
MO
ULD
BY
TREN
D O
PTIO
NA
L
CEMENT RENDER
BU
ILD
ING
IN L
UG
S
BUILDING IN LUGS
BR
ICK
WO
RK
BRICK OPENING = FRAME SIZE + 3mm
101.6
JAM
B
25FI
XIN
G A
T45
0mm
CEN
TRES
FIXING AT450mm CENTRES
Building In Detail | Aluminium Cladding on Studs
Casement Window - InstallationBuilding In Detail | Double Brick- 280mm wall | Prepared Opening
Casement Window - Installation
INSTALLING FRAME CORRECTLY
• Fit flashing to window surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 60mmWidth = Frame Size + 60mm
• Secure aluminum windows by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Header beam should be at least 12mm clear of window frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of windows, install sill support (refer to drawings below).
INSTALLING FRAME CORRECTLY
• Fit flashing to window surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Brick Opening:Height = Frame Size + 3mmWidth = Frame Size + 3mm
• Secure aluminum windows by using building lug - fixing at 450mm maximum centres.
• Sill bricks should be at least 10mm clear of window frame to allow settlement in brick veneer construction.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
3231Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
Building In Detail | Hebel Power Panel
Casement Window - InstallationCasement Window - InstallationBuilding In Detail | Blockwork
INSTALLING FRAME CORRECTLY
• Fit flashing to window surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 60mmWidth = Frame Size + 60mm
• Secure aluminum windows by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Caulk between render and frame.• Header beam should be at least 12mm clear of
window frame.• Do not permit weight of eaves or arch bars to bear
on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of windows, install sill support (refer to drawings below).
INSTALLING FRAME CORRECTLY
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Blockwork Opening:Height = Frame Size + 80mmWidth = Frame Size + 20mm
• Fit subframe to opening and seal fixings.• Seal ends of subsill with angle.• Fit window to subframe (screw or pop-rivet).• Do not permit weight of eaves or arch bars to bear
on any window or door frame. (Windows and doors are not load bearing.)
OUTSIDE
55
SUBSILL
RENDER BY BUILDER
SILL
HEAD
SUBHEAD
BLOCKWORK(SEALED OR PRETREATED BY BUILDER
AS PER BLOCKWORK SUPPLIER’S SPECIFICTION - TO PREVENT WATER PENETRATION)
FIXING 450 CENTRES
PACKERSEALANT
FIXING 450 CENTRES
FIXING 450 CENTRES
SEALANT
FRA
ME
SIZE
BLO
CK
WO
RK
OPE
NIN
G =
FR
AM
E H
EIG
HT
+ 80
mm
PACKERSEALANT
JAM
B
BLO
CK
WO
RK
(SEA
LED
OR
PR
ETR
EATE
D B
Y B
UIL
DER
AS
PER
BLO
CK
WO
RK
SU
PPLI
ER’S
SPE
CIF
ICTI
ON
- TO
PR
EVEN
T W
ATER
PEN
ETR
ATIO
N)
FRAME SIZE
BLOCKWORK OPENING = FRAME SIZE + 20mm
FIXI
NG
450
CEN
TRES
AN
GLE
TR
IM B
Y B
UIL
DER
FIXI
NG
450
CEN
TRES
REN
DER
BY
BU
ILD
ER
REN
DER
BY
BU
ILD
ER
101,6
101,6
39
101,
6
OUTSIDE
TIMBER REVEAL
FLASHINGBY BUILDER
HEBEL POWER PANEL
SILL SUPPORTBY BUILDER
SILL PLATE
NO PACKING12mm CLEARANCE
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 6
0mm
FRA
ME
SIZE
10mm CLEARANCEBETWEEN SOFFIT LINING AND WINDOW HEAD
QUAD BYBUILDER
SOFFIT LINING
TIMBER ARCHITRAVEBY BUILDER
TIMBER REVEAL
FLASHINGBY BUILDER
HEADER
PACKINGBY BUILDER
FIXINGS AT450mm CENTRES
25
101,6
101,6
25
HEAD
HEB
EL P
OW
ER P
AN
EL
FLA
SHIN
G B
Y B
UIL
DER
STU
DST
UD
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
PAC
KIN
GB
Y B
UIL
DER
FIXI
NG
S AT
450m
m C
ENTR
ES
TIM
BER
REV
EAL
101,6
25
JAM
B
SILL
33 34
Quantum® Casement Window
Cross Sectional Views
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend®
Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
3635Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
Casement Window - Cross Sectional ViewSingle Lite
Casement Window - Cross Sectional ViewTwo Lite | Transom | Elevation
62.0
62.0
62.0
42.0
42.0
42.0
101.6 101.6
28.6 28.6
38.9
38.9
25.0
25.0
25.0
13.0
13.0
13.0
51.7 36.0
13.0
13.0
28.3
28.3
28.3
13.0
outside
outside
outside
outside
3837Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
Casement Window - Cross Sectional ViewTwo Lite | Transom | Plan
62.0
42.0
25.0
25.025.0
13.0
13.013.0
51.7 36.0
13.0
13.0
28.3
13.0
outside outside
Casement Window - Cross Sectional ViewTwo Lite | Transom | Double Glazed | Elevation
62.0
42.0
25.0
25.025.0
13.0
13.013.0
51.7 36.0
13.0
13.0
28.3
13.0
outside outside
4039Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
Casement Window - Cross Sectional ViewOvolo
62.0
62.0
42.0 42.0
101.6 101.6
28.6 28.6
38.9
38.9
28.3
20.3
20.3
28.3
outside outside
Casement Window - Cross Sectional ViewTwo Lite | Transom | Double Glazed | Plan
62.0
42.0
25.0
25.025.0
13.0
13.013.0
51.7
36.0
13.0 13.0
28.3 13.0
outside outside
42.0
41 42
Quantum® Sliding Window
Features & Benefits
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend®
Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
4443Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
Sliding Window - Features & Benefits
SECURITY
BUSHFIRE
Sliding Window - Features & Benefits
FRAME
• Robust 102mm semi commercial aluminium window frame - ideal for larger window applications.
SASH
• 55mm sash stile slides effortlessly on heavy duty double bogey rollers.
• Head, sill and jamb rails all have flat infill for clean lines.• Sashes can be reversed*. • Operating sashes can easily be removable for cleaning and
maintenance.• Sash punched holes are fitted with infill caps.
*Onlyontwoliteconfigurations;Strikerholesinjambwillbevisible.
SILL
• Modern sill design with built-in sump sill and no insect traps for easy maintenance and cleaning.
• Sill track includes a rigid infill - helping eliminate paint wear in the track.
GLAZING & ENERGY EFFICIENCY
• All Trend® Windows and Doors comply with Australian Standards AS1288.
• Glazing options from 4mm single glazed to 24mm insulated glazed units (IGUs) .
• Energy efficiency options available to help reduce home energy consumption.
• All glazing options are Window Energy Rating Scheme (WERS) rated - providing a wide range of energy efficient solutions.
ACOUSTICS
• Acoustic solutions available for improved noise reduction• High Rw ratings available
WIND & WATER RATINGS
• All Trend® Windows and Doors are designed to meet and surpass 700Pa wind velocity rating and 150Pa water penetration rating and comply with Australian Standards AS2047.
• Pascal deflection rates up to 2200Pa.• Sliding window rated at an air infiltration of 0.84L/s m2
(below the the National Construction Code (NCC) for Air conditioned spaces of 1.00L/s m2) perfect for both air conditioned and non-air conditioned spaces.
• Sliding windows come standard with patented and architecturally designed Quantum® key lock.
• 100mm child-safe window opening restrictor is available.• Optional concealed intergrated vent-lock available - allowing secure
partial opening for ventilation.• Optional Prowler Proof security screens available.
HARDWARE
• Infinity Satin Chrome hardware with key lock comes standard on sliding windows.
• Optional colours are available:- Pearl White- Stone Beige- Anodic Natural Matt- Gloss Black
• Heavy duty dual roller system• Window locks can be keyed alike to other Quantum® products for ease
of use.
OPTIONS
• Glazing options also available in bar layout styles:- Colonial- Federation - Ovolo glazing bar style*
• Wide range of powder coated colours.• Easy to fit and remove flyscreens available.• Customised WERS ratings.• Variety of sizes and custom made options available (including bay
window styles).• Variety of configuration options available.
*Ovoloonlyavailableinsingleglazing.
DELIVERY
• Protective wrapping for delivery to site comes standard for all Quantum® products.
• Xtreme® Bushfire Protection option available.• Xtreme® options have been tested by CSIRO
to meet BAL-40 - compliant to AS1530.8.1 within Australian Standards AS3959-2009.
45 46
Quantum® Sliding Window
Installation
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend®
Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
4847Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
Sliding Window - InstallationBuilding In Detail | Double Brick - 280mm wallBuilding In Detail | Brick Veneer - 240mm wall
Sliding Window - Installation
INSTALLING FRAME CORRECTLY
• Fit flashing to window surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 60mmWidth = Frame Size + 60mm
• Secure aluminum windows by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Sill bricks should be at least 10mm clear of window frame to allow settlement in brick veneer construction.
• Header beam should be at least 12mm clear of window frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of window, install sill support (refer to drawings below).
INSTALLING FRAME CORRECTLY
• Fit flashing to window surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Brick Opening:Height = Frame Size + 3mmWidth = Frame Size + 3mm
• Secure aluminum windows by using building lug - fixing at 450mm maximum centres.
• Sill bricks should be at least 10mm clear of window frame to allow settlement in brick veneer construction.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
OUTSIDE
SOFFIT LININGTIMBER REVEAL
HEADER12mm CLEARANCE
TIMBER ARCHITRAVE BY BUILDER
FIXINGS AT 450mm CENTRES
PACKING BY BUILDER
FLASHINGBY BUILDER
BRICK SILL SILL PLATE
SILL SUPPORTBY BUILDER
QUAD BYBUILDER
10mm CLEARANCEBETWEEN SOFFIT LINING AND WINDOW HEAD
10mm MINIMUM CLEARANCE BETWEEN SILL BRICK AND WINDOW SILL WHERE TIMBER FRAME IS USED
FRA
ME
SIZE
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 6
0mm
TIMBER REVEAL
HEAD
101.6
25
SILL
101.6
39
FLASHINGBY BUILDER
NO PACKING
STUD OPENING = FRAME SIZE + 60mm
FRAME SIZE
FLA
SHIN
G B
Y B
UIL
DER
BR
ICK
WO
RK
TIM
BER
REV
EAL ST
UD
STU
D
101.6 FI
XIN
GS
AT
450m
m C
ENTR
ES
PAC
KIN
G B
Y B
UIL
DER
JAM
B
13
BRICKWORK BRICKWORK
BRICKWORK
FLASHING BY BUILDER
BRICK SILL
FLASHING BY BUILDER
STEEL LINTEL BY BUILDER
ALUMINIUM ANGLE AND FIXING BY BUILDER
FRA
ME
SIZE
BR
ICK
OPE
NIN
G =
FR
AM
E SI
ZE +
3m
m
101.6
25
HEAD
CEM
ENT R
END
ERC
EMEN
T REN
DER
SILL
101.6
39
OUTSIDE
BR
ICK
WO
RK
BU
ILD
ING
IN L
UG
S AT
450m
m C
ENTR
ES
FLA
SHIN
G B
Y B
UIL
DER
FRAME SIZE
CEMENT RENDER
BR
ICK
WO
RK
BRICK OPENING = FRAME SIZE + 3mm
101.6 JA
MB
13
5049Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
BRICKWORK BRICKWORK
BRICKWORK
FLASHING BY BUILDER
BRICK SILL
FLASHING BY BUILDER
STEEL LINTEL BY BUILDER
ALUMINIUM ANGLE AND FIXING BY BUILDER
FRA
ME
SIZE
BR
ICK
OPE
NIN
G =
FR
AM
E SI
ZE +
3m
m
101.6
25
HEAD
CEM
ENT R
END
ERC
EMEN
T REN
DER
SILL
101.6
39
OUTSIDE
BR
ICK
WO
RK
FLA
SHIN
G B
Y B
UIL
DER
FRAME SIZE AN
GLE
TR
IMB
Y B
UIL
DER
CEMENT RENDER
BR
ICK
WO
RK
BRICK OPENING = FRAME SIZE + 3mm
101.6 JA
MB
13
BUILDING IN LUGS
FIXING AT450mm CENTRES
BU
ILD
ING
IN L
UG
S
FIXI
NG
AT
450m
m C
ENTR
ES
Building In Detail | Cladding on Studwall
Sliding Window - InstallationSliding Window - InstallationBuilding In Detail | Double Brick - 280mm wall | Prepared Opening
INSTALLING FRAME CORRECTLY
• Fit flashing to window surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 60mmWidth = Frame Size + 60mm
• Secure aluminum windows by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Header beam should be at least 12mm clear of window frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of windows, install sill support (refer to drawings below).
INSTALLING FRAME CORRECTLY
• Fit flashing to window surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Brick Opening:Height = Frame Size + 3mmWidth = Frame Size + 3mm
• Secure aluminum windows by using building lug - fixing at 450mm maximum centres.
• Sill bricks should be at least 10mm clear of window frame to allow settlement in brick veneer construction.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
TIMBER REVEAL
TIMBER REVEAL
HEADER
WALL CLADDING
DRESS SARKING INTO CLADDING "U" TRIM AT HEAD AS SHOWN
NO PACKING
FLASHING BY BUILDER
FRA
ME
SIZE
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 6
0mm
12mm CLEARANCE
TIMBER ARCHITRAVE BY BUILDER
SILL PLATE
FLASHING BY BUILDER
ALUMINIUM OR VINYLWALL CLADDING
101.6
25HEAD
101.6
SILL
39
PACKING BY BUILDER
FIXINGS AT 450mm CENTRES
OUTSIDE
TIM
BER
REV
EAL
STU
D
STU
D
WALL CLADDING
FLA
SHIN
G B
Y B
UIL
DER
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
CA
ULK
ING
101.6
JAM
B
13
FIXI
NG
S AT
45
0mm
CEN
TRES
PAC
KIN
G B
Y B
UIL
DER
5251Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
Building In Detail | Hebel Power Panel
Sliding Window - InstallationSliding Window - InstallationBuilding In Detail | Blockwork
INSTALLING FRAME CORRECTLY
• Fit flashing to window surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 60mmWidth = Frame Size + 60mm
• Secure aluminum windows by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Caulk between render and frame.• Header beam should be at least 12mm clear of
window frame.• Do not permit weight of eaves or arch bars to bear
on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of windows, install sill support (refer to drawings below).
INSTALLING FRAME CORRECTLY
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Blockwork Opening:Height = Frame Size + 80mmWidth = Frame Size + 20mm
• Fit subframe to opening and seal fixings.• Seal ends of subsill with angle.• Fit window to subframe (screw or pop-rivet).• Do not permit weight of eaves or arch bars to bear
on any window or door frame. (Windows and doors are not load bearing.)
OUTSIDE
55
SUBSILL
RENDER BY BUILDER
SILL
HEAD
SUBHEAD
BLOCKWORK(SEALED OR PRETREATED BY BUILDER
AS PER BLOCKWORK SUPPLIER’S SPECIFICTION - TO PREVENT WATER PENETRATION)
FIXING 450 CENTRES
PACKERSEALANT
FIXING 450 CENTRES
FIXING 450 CENTRES
SEALANT
FRA
ME
SIZE
BLO
CK
WO
RK
OPE
NIN
G =
FR
AM
E H
EIG
HT
+ 80
mm
PACKERSEALANT
JAM
B
BLO
CK
WO
RK
(SEA
LED
OR
PR
ETR
EATE
D B
Y B
UIL
DER
AS
PER
BLO
CK
WO
RK
SU
PPLI
ER’S
SPE
CIF
ICTI
ON
- TO
PR
EVEN
T W
ATER
PEN
ETR
ATIO
N)
FRAME SIZE
BLOCKWORK OPENING = FRAME SIZE + 20mm
FIXI
NG
450
CEN
TRES
AN
GLE
TR
IM B
Y B
UIL
DER
FIXI
NG
450
CEN
TRES
REN
DER
BY
BU
ILD
ER
REN
DER
BY
BU
ILD
ER
101.6
39
101.6
13
OUTSIDE
TIMBER REVEAL
FLASHINGBY BUILDER
HEBEL POWER PANEL
SILL SUPPORTBY BUILDER
SILL PLATE
NO PACKING12mm CLEARANCE
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 6
0mm
FRA
ME
SIZE
10mm CLEARANCEBETWEEN SOFFIT LINING AND WINDOW HEAD
QUAD BYBUILDER
SOFFIT LINING
TIMBER ARCHITRAVEBY BUILDER
TIMBER REVEAL
FLASHINGBY BUILDER
HEADER
PACKINGBY BUILDER
FIXINGS AT450mm CENTRES
HEAD
HEB
EL P
OW
ER P
AN
EL
FLA
SHIN
G B
Y B
UIL
DER
STU
DST
UD
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
PAC
KIN
GB
Y B
UIL
DER
FIXI
NG
S AT
450m
m C
ENTR
ES
TIM
BER
REV
EAL
JAM
B
SILL
101.6
101.6
39
101.6
13
53 54
Quantum® Sliding Window
Cross Sectional View
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend®
Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
5655Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
Two Lite | Transom
25.0
25.0
36.0
45.8
38.549.8
48.3
40.1
outside
25.0
25.0
54.0
outside
Sliding Window - Cross Sectional View25
.045
.8
25.0
101.6 101.6
73.0 73.0
44.154.5
44.1
29.2
48.3
38.938.5
25.0
23.523.5
outside outside
Two Lite
Sliding Window - Cross Sectional View
5857Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
Double Glazed
Sliding Window - Cross Sectional View
25.0
45.8
25.0
44.154.5
44.1
29.2
38.938.5
48.3
25.0
23.523.5outside
outside
20.3
20.3
45.5
55.2
52.8
23.523.5
51.151.1
68.5
outside
outside
Ovolo
Sliding Window - Cross Sectional View
59 60
Quantum® Sashless Double Hung
Features & Benefits
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend®
Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
6261Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
Sashless Double Hung - Features & Benefits
SECURITY
• Sashless Double Hung windows come standard with patented and architecturally designed Quantum® key lock.
• 100mm child-safe window opening restrictor available.• Optional concealed integrated vent-lock available - allowing secure
partial opening for ventilation.• Optional Prowler Proof security screens available.
BUSHFIRE
• Meets BAL-29 - compliant to Australian Standards AS3959-2009.
HARDWARE
• Quantum® key lock supplied as standard in Infinity Satin Chrome.• Optional colours are available:
- Pearl White- Stone Beige- Anodic Natural Matt- Gloss Black
• Window locks can be keyed alike to other Quantum® products for ease of use.
OPTIONS
• Wide range of powder coated colours.• Easy to fit and remove flyscreens available.• Customised WERS ratings.• Variety of sizes and custom made options available (including bay
window styles).• Variety of configuration options available.• Can be fitted to door panels in hinged and bifold doors.
DELIVERY
• Protective wrapping for delivery to site comes standard for all Quantum® products.
Sashless Double Hung - Features & Benefits
FRAME
• Robust 102mm semi commercial aluminium window frame - ideal for larger window applications.
SASH
• 55mm window sash section.• Patented vent option.• Vertical counter balance sashes, when both top and
bottom sashes are open allowing control of room ventilation.
SILL
• Modern sill design with built-in sump sill.
GLAZING & ENERGY EFFICIENCY
• All Trend® Windows and Doors comply with Australian Standards AS1288.
• Glazing options of 6mm toughened polished edged single glazing.
• Energy efficiency options available to help reduce home energy consumption.
• All glazing options are Window Energy Rating Scheme (WERS) rated - providing a wide range of energy efficient solutions.
ACOUSTICS
• Acoustic solutions available for improved noise reduction.
• High Rw ratings available.
WIND & WATER RATINGS
• All Trend® Windows and Doors are designed to meet and surpass 700Pa wind velocity rating and 150Pa water penetration rating and comply with Australian Standards AS2047.
63 64
Quantum® Sashless Double Hung
Installation
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend®
Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
6665Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
BRICKWORK BRICKWORK
BRICKWORK
FLASHING BY BUILDER
BRICK SILL
FLASHING BY BUILDER
STEEL LINTEL BY BUILDER
ALUMINIUM ANGLE AND FIXING BY BUILDER
BR
ICK
OPE
NIN
G =
FR
AM
E SI
ZE +
3m
m
FRA
ME
SIZE
101.6
25
HEAD
CEM
ENT R
END
ERC
EMEN
T REN
DER
SILL
101.6
29
OUTSIDE
BR
ICK
WO
RK
BU
ILD
ING
IN L
UG
S AT
450m
m C
ENTR
ESFL
ASH
ING
BY
BU
ILD
ER
FRAME SIZE
STO
RM
MO
ULD
BY
TREN
D O
PTIO
NA
L
CEMENT RENDER
BR
ICK
WO
RK
BRICK OPENING = FRAME SIZE + 3mm
101.6
25
JAM
B
OUTSIDE
SOFFIT LININGTIMBER REVEAL
HEADER
12mm CLEARANCE
TIMBER ARCHITRAVE BY BUILDER
FIXINGS AT 450mm CENTRES
PACKING BY BUILDER
FLASHINGBY BUILDER
BRICK SILLSILL PLATE
SILL SUPPORTBY BUILDER
QUAD BYBUILDER
10mm CLEARANCEBETWEEN SOFFIT LINING AND WINDOW HEAD
10mm MINIMUM CLEARANCE BETWEEN SILL BRICK AND WINDOW SILL WHERE TIMBER FRAME IS USED
FRA
ME
SIZE
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 6
0mm
TIMBER REVEAL
HEAD
101.6
25
SILL
101.6
29
FLASHINGBY BUILDER
NO PACKING
STUD OPENING = FRAME SIZE + 60mm
FRAME SIZE
FLA
SHIN
G B
Y B
UIL
DER
BR
ICK
WO
RK
TIM
BER
REV
EAL
STU
DST
UD
101.6
25FI
XIN
GS
AT
450m
m C
ENTR
ES
PAC
KIN
G B
Y B
UIL
DER
JAM
B
Sashless Double Hung - InstallationBuilding In Detail | Double Brick - 280mm wallBuilding In Detail | Brick Veneer - 240mm wall
Sashless Double Hung - Installation
INSTALLING FRAME CORRECTLY
• Fit flashing to window surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 60mmWidth = Frame Size + 60mm
• Secure aluminum windows by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Sill bricks should be at least 10mm clear of window frame to allow settlement in brick veneer construction.
• Header beam should be at least 12mm clear of window frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of window, install sill support (refer to drawings below).
INSTALLING FRAME CORRECTLY
• Fit flashing to window surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Brick Opening:Height = Frame Size + 3mmWidth = Frame Size + 3mm
• Secure aluminum windows by using building lug - fixing at 450mm maximum centres.
• Sill bricks should be at least 10mm clear of window frame to allow settlement in brick veneer construction.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
6867Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
BRICKWORK BRICKWORK
BRICKWORK
FLASHING BY BUILDER
BRICK SILL
FLASHING BY BUILDER
STEEL LINTEL BY BUILDER
ALUMINIUM ANGLE AND FIXING BY BUILDER
BR
ICK
OPE
NIN
G =
FR
AM
E SI
ZE +
3m
m
FRA
ME
SIZE
101.6
25
HEAD
CEM
ENT R
END
ERC
EMEN
T REN
DER
SILL
101.6
29
OUTSIDE
BR
ICK
WO
RK
FLA
SHIN
G B
Y B
UIL
DER
FRAME SIZE
CEMENT RENDER
BR
ICK
WO
RK
BRICK OPENING = FRAME SIZE + 3mm
101.6
25
JAM
B
AN
GLE
TR
IMB
Y B
UIL
DER
BU
ILD
ING
IN L
UG
S
FIXI
NG
AT
450m
m C
ENTR
ES
BUILDING IN LUGS
FIXING AT450mm CENTRES
TIMBER REVEAL
TIMBER REVEAL
HEADER
WALL CLADDING
DRESS SARKING INTO CLADDING "U" TRIM AT HEAD AS SHOWN
NO PACKING
FLASHING BY BUILDER
FRA
ME
SIZE
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 6
0mm
12mm CLEARANCE
TIMBER ARCHITRAVE BY BUILDER
SILL PLATE
FLASHING BY BUILDER
ALUMINIUM OR VINYLWALL CLADDING
101.6
25HEAD
101.6
SILL
29
PACKING BY BUILDER
FIXINGS AT 450mm CENTRES
OUTSIDE
TIM
BER
REV
EAL
STU
D
STU
D
WALL CLADDING
FLA
SHIN
G B
Y B
UIL
DER
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
CA
ULK
ING
101.6
25
FIXI
NG
S AT
45
0mm
CEN
TRES
PAC
KIN
G B
Y B
UIL
DER
JAM
B
Building In Detail | Cladding on Studwall
Sashless Double Hung - InstallationSashless Double Hung - InstallationInstallation | Building In Detail | Double Brick - 280mm wall | Prepared Opening
INSTALLING FRAME CORRECTLY
• Fit flashing to window surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 60mmWidth = Frame Size + 60mm
• Secure aluminum windows by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Header beam should be at least 12mm clear of window frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of windows, install sill support (refer to drawings below).
INSTALLING FRAME CORRECTLY
• Fit flashing to window surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Brick Opening:Height = Frame Size + 3mmWidth = Frame Size + 3mm
• Secure aluminum windows by using building lug - fixing at 450mm maximum centres.
• Sill bricks should be at least 10mm clear of window frame to allow settlement in brick veneer construction.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
7069Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
OUTSIDE
55
SUBSILL
RENDER BY BUILDER
SILL
HEAD
SUBHEAD
BLOCKWORK(SEALED OR PRETREATED BY BUILDER
AS PER BLOCKWORK SUPPLIER’S SPECIFICTION - TO PREVENT WATER PENETRATION)
BLO
CK
WO
RK
(SEA
LED
OR
PR
ETR
EATE
D B
Y B
UIL
DER
AS
PER
BLO
CK
WO
RK
SU
PPLI
ER’S
SPE
CIF
ICTI
ON
- TO
PR
EVEN
T W
ATER
PEN
ETR
ATIO
N)
FRAME SIZE
BLOCKWORK OPENING = FRAME SIZE + 20mm
FIXI
NG
450
CEN
TRES
AN
GLE
TR
IM B
Y B
UIL
DER
FIXI
NG
450
CEN
TRES
REN
DER
BY
BU
ILD
ER
REN
DER
BY
BU
ILD
ER
FIXING 450 CENTRES
PACKERSEALANT
FIXING 450 CENTRES
FIXING 450 CENTRES
SEALANT
FRA
ME
SIZE
BLO
CK
WO
RK
OPE
NIN
G =
FR
AM
E H
EIG
HT
+ 80
mm
PACKERSEALANT
101.6
43
25
101.6
JAM
B
OUTSIDE
TIMBER REVEAL
FLASHINGBY BUILDER
HEBEL POWER PANEL
SILL SUPPORTBY BUILDER
SILL PLATE
NO PACKING12mm CLEARANCE
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 6
0mm
FRA
ME
SIZE
10mm CLEARANCEBETWEEN SOFFIT LINING AND WINDOW HEAD
QUAD BYBUILDER
SOFFIT LINING
TIMBER ARCHITRAVE BY BUILDER
TIMBER REVEAL
FLASHINGBY BUILDER
HEADER
PACKINGBY BUILDER
FIXINGS AT450mm CENTRES
HEAD
SILL
HEB
EL P
OW
ER P
AN
EL
FLA
SHIN
G B
Y B
UIL
DER
STU
DST
UD
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
PAC
KIN
GB
Y B
UIL
DER
FIXI
NG
S AT
450m
m C
ENTR
ES
TIM
BER
REV
EAL
JAM
B
101.6
31.6
25
25
101.6
Building In Detail | Hebel Power Panel
Sashless Double Hung - InstallationBuilding In Detail | Blockwork
Sashless Double Hung - Installation
INSTALLING FRAME CORRECTLY
• Fit flashing to window surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 60mmWidth = Frame Size + 60mm
• Secure aluminum windows by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Caulk between render and frame.• Header beam should be at least 12mm clear of
window frame.• Do not permit weight of eaves or arch bars to bear
on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of windows, install sill support (refer to drawings below).
INSTALLING FRAME CORRECTLY
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Blockwork Opening:Height = Frame Size + 80mmWidth = Frame Size + 20mm
• Fit subframe to opening and seal fixings.• Seal ends of subsill with angle.• Fit window to subframe (screw or pop-rivet).• Do not permit weight of eaves or arch bars to bear
on any window or door frame. (Windows and doors are not load bearing.)
71 72
Quantum® Sashless Double Hung
Cross Sectional Views
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend®
Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
7473Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
Two Lite | Transom
Sashless Double Hung - Cross Sectional ViewsTwo Lite
Sashless Double Hung - Cross Sectional Views
25.0
25.0
25.0
25.036.0
35.0
36.0
13.0
13.0
13.013.0
55.0
outside outside
25.0
25.0
25.0
101.6 101.6
101.6 101.6
73.0 73.0
73.0 73.0
55.0
55.0
41.512.0
41.5
40.035.0
outside outside
75 76
Quantum® Louvre Window
Features & Benefits
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend®
Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
7877Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
Louvre Window - Features & Benefits
BUSHFIRE
• Meets BAL-29 - to Australian Standards AS3959-2009.
HARDWARE
• Handles can be configured to left, right, high or low placement.• Optional Altair Power Louvre available for “out-of-reach”
configurations.• Optional key lock available.• Optional, easy to operate A13, low profile and “O-Ring” handles
available.
OPTIONS
• Wide range of powder coated colours.• Customised WERS ratings.• Variety of sizes and custom made options available.• Variety of configuration options available.• Easy to install flyscreens fitted to exterior of window.
DELIVERY
• Protective wrapping for delivery to site comes standard for all Quantum® products.
Louvre Window - Features & Benefits
FRAME
• Overall frame size 130m wide.• When using 130mm frame, minimum recommended
reveal size is 138mm.• Installed as a single frame or ideal for combination
styles with other Quantum® products.
LOUVRE BLADES
• Blades are 152mm or 102mm widths.• Opaque, tinted or toughened glass blades available.• Timber, aluminium blades available.• 6mm toughened glass blades are supplied as
standard.
GLAZING & ENERGY EFFICIENCY
• All Trend® Windows and Doors comply with Australian Standards AS1288.
• 6mm glass supplied only as standard.• Optional frosted, etched, tinted or toughened glass
available.• Energy efficiency options available to help reduce
home energy consumption.• All glazing options are Window Energy Rating
Scheme (WERS) rated - providing a wide range of energy efficient solutions.
ACOUSTICS
• Acoustic solutions available for improved noise reduction.
WIND & WATER RATINGS
• All Trend® Windows and Doors are designed to meet and surpass 700Pa wind velocity rating and 150Pa water penetration rating and comply with Australian Standards AS2047.
• Louvre windows rated at an air infiltration of 1.48L/s m2.
SECURITY
• 100mm safety window restrictor is available if required.
• Security bars to fit standard blade widths**.• Breezway Stronghold System available.
**Breezway 130mm Easy Frame louvre only.
79 80
Quantum® Louvre Window
Installation
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend®
Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
8281Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
BRICKWORK BRICKWORK
BRICKWORK
FLASHING BY BUILDER
BRICK SILL
SILL FLAP
FLASHING BY BUILDER
STEEL LINTEL BY BUILDER
ALUMINIUM ANGLE AND FIXING BY BUILDER
CEM
ENT
REN
DER
BR
ICK
OPE
NIN
G =
FR
AM
E SI
ZE +
3m
m
FRA
ME
SIZE
130
HEAD 25C
EMEN
T R
END
ER
SILL
130
25
OUTSIDE
BR
ICK
WO
RK
FLA
SHIN
G B
Y B
UIL
DER
FRAME SIZE
STO
RM
MO
ULD
BY
TREN
D O
PTIO
NA
L
CEMENT RENDER
BR
ICK
WO
RK
BRICK OPENING = FRAME SIZE + 3mm
130
JAM
B
25
BU
ILD
ING
IN L
UG
S AT
450m
m C
ENTR
ES
Building In Detail | Double Brick - 280mm wallBuilding In Detail | Brick Veneer - 240mm wall
OUTSIDE
SOFFIT LININGTIMBER REVEAL
HEADER12mm CLEARANCE
TIMBER ARCHITRAVE BY BUILDER
FIXINGS AT450mm CENTRES
PACKINGBY BUILDER
FLASHINGBY BUILDER
SILL FLAP
BRICK SILLSILL PLATE
SILL SUPPORTBY BUILDER
QUAD BYBUILDER
10mm CLEARANCEBETWEEN SOFFIT LINING AND WINDOW HEAD
10mm MINIMUM CLEARANCE BETWEEN SILL BRICK AND WINDOW SILL WHERE TIMBER FRAME IS USED
FRA
ME
SIZE
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 6
0mm
TIMBER REVEAL
HEAD
SILL
JAM
B
STUD OPENING = FRAME SIZE + 60mm
FRAME SIZE
FLA
SHIN
G B
Y B
UIL
DER
BR
ICK
WO
RK
TIM
BER
REV
EAL
FIXI
NG
S AT
450m
m C
ENTR
ES
PAC
KIN
G B
Y B
UIL
DER
STU
DST
UD
130
25
130
130
2525
FLASHINGBY BUILDER
NO PACKING
Louvre Window - InstallationLouvre Window - Installation
INSTALLING FRAME CORRECTLY
• Fit flashing to window surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 60mmWidth = Frame Size + 60mm
• Secure aluminum windows by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Sill bricks should be at least 10mm clear of window frame to allow settlement in brick veneer construction.
• Header beam should be at least 12mm clear of window frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of window, install sill support (refer to drawings below).
INSTALLING FRAME CORRECTLY
• Fit flashing to window surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Brick Opening:Height = Frame Size + 3mmWidth = Frame Size + 3mm
• Secure aluminum windows by using building lug - fixing at 450mm maximum centres.
• Sill bricks should be at least 10mm clear of window frame to allow settlement in brick veneer construction.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
8483Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
HEADER
WALL CLADDING
DRESS SARKING INTO CLADDING "U" TRIM AT HEAD AS SHOWN
NO PACKING
FLASHING BY BUILDER
FRA
ME
SIZE
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 6
0mm
12mm CLEARANCE
TIMBER ARCHITRAVEBY BUILDER
PACKING BY BUILDER
FIXINGS AT 450mm CENTRES
SILL PLATE
FLASHING BY BUILDER
ALUMINIUM OR VINYLWALL CLADDING
SILL FLAP
130
TIMBER REVEAL
25HEAD
130
SILL 25
TIMBER REVEAL
STU
D
STU
D
WALL CLADDING
FLA
SHIN
G B
Y B
UIL
DER
PAC
KIN
G B
Y B
UIL
DER
FIXI
NG
S AT
450
mm
CEN
TRES
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
CA
ULK
ING
130
JAM
B
25
TIM
BER
REV
EAL
OUTSIDE
Building In Detail | Cladding on Studwall
Louvre Window - Installation
BRICKWORK BRICKWORK
BRICKWORK
FLASHING BY BUILDER
BRICK SILL
SILL FLAP
FLASHING BY BUILDER
STEEL LINTEL BY BUILDER
ALUMINIUM ANGLE AND FIXING BY BUILDER
CEM
ENT
REN
DER
FRA
ME
SIZE
BR
ICK
OPE
NIN
G =
FR
AM
E SI
ZE +
3m
m 130
HEAD 25C
EMEN
T R
END
ER
SILL
130
25
OUTSIDE
BR
ICK
WO
RK
FLA
SHIN
G B
Y B
UIL
DER
FRAME SIZE
CEMENT RENDER
BR
ICK
WO
RK
BRICK OPENING = FRAME SIZE + 3mm
130
JAM
B
25
AN
GLE
TR
IMB
Y B
UIL
DER
BUILDING IN LUGS
FIXI
NG
AT
450m
m C
ENTR
ES
FIXING AT450mm CENTRES
Building In Detail | Double Brick - 280mm wall | Prepared Opening
Louvre Window - Installation
INSTALLING FRAME CORRECTLY
• Fit flashing to window surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 60mmWidth = Frame Size + 60mm
• Secure aluminum windows by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Header beam should be at least 12mm clear of window frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of windows, install sill support (refer to drawings below).
INSTALLING FRAME CORRECTLY
• Fit flashing to window surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Brick Opening:Height = Frame Size + 3mmWidth = Frame Size + 3mm
• Secure aluminum windows by using building lug - fixing at 450mm maximum centres.
• Sill bricks should be at least 10mm clear of window frame to allow settlement in brick veneer construction.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
8685Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
OUTSIDE
TIMBER REVEAL
HEBEL POWER PANEL
FLASHING BY BUILDER
STUDSTUD
FLASHINGBY BUILDER
FRA
ME
SIZE
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 6
0mm
HEBEL POWER PANEL
PACKINGBY BUILDER
FIXINGS AT450mm CENTRES
TIMBER REVEAL
SILL PLATE
NO PACKING12mm CLEARANCE
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 6
0mm
FRA
ME
SIZE
10mm CLEARANCEBETWEEN SOFFIT LINING AND WINDOW HEAD
QUAD BYBUILDER
SOFFIT LINING
TIMBER ARCHITRAVE BY BUILDER
TIMBER REVEAL
FLASHINGBY BUILDER
HEADER
PACKINGBY BUILDER
FIXINGS AT450mm CENTRES
JAMB
HEB
EL P
OW
ER P
AN
EL
FLA
SHIN
G B
Y B
UIL
DER
STU
DST
UD
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
PAC
KIN
GB
Y B
UIL
DER
FIXI
NG
S AT
450m
m C
ENTR
ES
TIM
BER
REV
EAL
JAM
B
HEAD
SILL
130
2929
29
130
130
29
130
SILL SUPPORTBY BUILDER
OUTSIDE
55
SUBSILL
RENDER BY BUILDER
SILL
HEAD
SUBHEAD
BLOCKWORK(SEALED OR PRETREATED BY BUILDER
AS PER BLOCKWORK SUPPLIER’S SPECIFICTION - TO PREVENT WATER PENETRATION)
BLO
CK
WO
RK
(SEA
LED
OR
PR
ETR
EATE
D B
Y B
UIL
DER
AS
PER
BLO
CK
WO
RK
SU
PPLI
ER’S
SPE
CIF
ICTI
ON
- TO
PR
EVEN
T W
ATER
PEN
ETR
ATIO
N)
FRAME SIZE
BLOCKWORK OPENING = FRAME SIZE + 20mm
FIXI
NG
450
CEN
TRES
AN
GLE
TR
IM B
Y B
UIL
DER
FIXI
NG
450
CEN
TRES
REN
DER
BY
BU
ILD
ER
REN
DER
BY
BU
ILD
ER
FIXING 450 CENTRES
PACKERSEALANT
FIXING 450 CENTRES
FIXING 450 CENTRES
SEALANT
FRA
ME
SIZE
BLO
CK
WO
RK
OPE
NIN
G =
FR
AM
E H
EIG
HT
+ 80
mm
PACKERSEALANT
130
39
25
130
Building In Detail | Hebel Power Panel
Louvre Window - InstallationLouvre Window - InstallationBuilding In Detail | Blockwork
INSTALLING FRAME CORRECTLY
• Fit flashing to window surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 60mmWidth = Frame Size + 60mm
• Secure aluminum windows by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Caulk between render and frame.• Header beam should be at least 12mm clear of
window frame.• Do not permit weight of eaves or arch bars to bear
on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of windows, install sill support (refer to drawings below).
INSTALLING FRAME CORRECTLY
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Blockwork Opening:Height = Frame Size + 80mmWidth = Frame Size + 20mm
• Fit subframe to opening and seal fixings.• Seal ends of subsill with angle.• Fit window to subframe (screw or pop-rivet).• Do not permit weight of eaves or arch bars to bear
on any window or door frame. (Windows and doors are not load bearing.)
87 88
Quantum® Louvre Window
Cross Sectional Views
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend®
Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
9089Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
Two Lite | Fixed Lite | ElevationTwo Lite | Blades | Elevation
Louvre Window - Cross Sectional ViewLouvre Window - Cross Sectional View
84.228.6
53.9
24.724.7
53.925.0
25.025.0
25.0
outside
9291Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
Two Lite | Plan
Louvre Window - Cross Sectional View
84.228.6
25.026.5
25.0
outside
93 94
Quantum® Bifold WindowFeatures & Benefits
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend®
Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
9695Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
Bifold Window - Features & Benefits
WIND & WATER RATINGS
• All Trend® Windows and Doors are designed to meet and surpass 700Pa wind velocity rating and 150Pa water penetration rating and comply with Australian Standards AS2047.
• Bifold window rated at an air infiltration of 0.67L/s m2.
HARDWARE
• Infinity Satin Chrome hardware supplied as standard.• Optional colours available are:
- Pearl White - Stone Beige - Anodic Natural Matt - Gloss Black
• Durable stainless steel hinges available as standard.• Window locks can be keyed alike to other Quantum® products
for ease of use.
OPTIONS
• Glazing options also available in bar layout styles:- Colonial- Federation - Ovolo glazing bar style*
• Wide range of powdercoated colours.• Customised WERS ratings.• Variety of sizes and custom made options available.• Variety of configuration options available.
*Ovoloonlyavailableinsingleglazing.
DELIVERY
• Protective wrapping for delivery to site comes standard for all Quantum® products.
Bifold Window - Features & Benefits
FRAME
• Robust 102mm semi commercial aluminium window frame, ideal for larger bifolding windows.
SASH
• 62mm wide window sash section with heights up to 1600mm*.
• Maximum leaf size is 870mm wide.
*Configurationsareopenoutonly.
SILL
• If no sill is required this option for “servery windows” is available.* *Nosilloptiondoesnotmeetwaterandwindrequirements.
GLAZING & ENERGY EFFICIENCY
• All Trend® Windows and Doors comply with Australian Standards AS1288.
• Glazing options from 4mm single glazed to 18mm insulated glazed units (IGUs) .
• Energy efficiency options available to help reduce home energy consumption.
• All glazing options are Window Energy Rating Scheme (WERS) rated - providing a wide range of energy efficient solutions.
ACOUSTICS
• Acoustic solutions available for improved noise reduction.
• High Rw ratings available.
97 98
Quantum® Bifold Window
Installation
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend®
Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
10099Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
BRICKWORK BRICKWORK
BRICKWORK
FLASHING BY BUILDER
BRICK SILL
SILL FLAP
FLASHING BY BUILDER
STEEL LINTEL BY BUILDER
ALUMINIUM ANGLE AND FIXING BY BUILDER
BR
ICK
OPE
NIN
G =
FR
AM
E SI
ZE +
3m
m
FRA
ME
SIZE
CEM
ENT R
END
ERC
EMEN
T REN
DER
101.6
SILL
47.7
65
101.6
HEAD
CAVITY FIXING BLOCK
FIXING BY BUILDER
BR
ICK
WO
RK
BU
ILD
ING
IN L
UG
S AT
450m
m C
ENTR
ESFL
ASH
ING
BY
BU
ILD
ER
FRAME SIZE
CEMENT RENDER
BR
ICK
WO
RK
BRICK OPENING = FRAME SIZE + 3mm
101.6
JAM
B
35
OUTSIDEOUTSIDE
SOFFIT LININGTIMBER REVEAL
HEADER12mm CLEARANCE
TIMBER ARCHITRAVE BY BUILDER
FIXINGS AT 450mm CENTRES
PACKING BY BUILDER
FLASHINGBY BUILDER
SILL FLAP
BRICK SILLSILL PLATE
SILL SUPPORTBY BUILDER
QUAD BYBUILDER
10mm CLEARANCEBETWEEN SOFFIT LINING AND WINDOW HEAD
10mm MINIMUM CLEARANCE BETWEEN SILL BRICK AND WINDOW SILL WHERE TIMBER FRAME IS USED
FRA
ME
SIZE
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 6
0mm
TIMBER REVEAL
HEAD
SILL
FLASHINGBY BUILDER
65
101.6
NO PACKING
47.7
101.6
STUD OPENING = FRAME SIZE + 60mm
FRAME SIZE
FLA
SHIN
G B
Y B
UIL
DER
BR
ICK
WO
RK
TIM
BER
REV
EAL
STU
DST
UD
JAM
B
FIXI
NG
S AT
45
0mm
CEN
TRES
PAC
KIN
G B
Y B
UIL
DER
101.6
35
FIXING BY BUILDER
Building In Detail | Double Brick - 280mm wallBuilding In Detail | Brick Veneer - 240mm wall
Bifold Window - InstallationBifold Window - Installation
INSTALLING FRAME CORRECTLY
• Fit flashing to window surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 60mmWidth = Frame Size + 60mm
• Secure aluminum windows by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Sill bricks should be at least 10mm clear of window frame to allow settlement in brick veneer construction.
• Header beam should be at least 12mm clear of window frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of window, install sill support (refer to drawings below).
• Build-in 3mm camber to head.• Bifolds top-hung - beam must support weight.
INSTALLING FRAME CORRECTLY
• Fit flashing to window surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Brick Opening:Height = Frame Size + 3mmWidth = Frame Size + 3mm
• Secure aluminum windows by using building lug - fixing at 450mm maximum centres.
• Sill bricks should be at least 10mm clear of window frame to allow settlement in brick veneer construction.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• Build-in 3mm camber to head.• Bifolds top-hung - beam must support weight.
102101Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
TIMBER REVEAL
TIMBER REVEAL
HEADER
WALL CLADDING
DRESS SARKING INTO CLADDING "U" TRIM AT HEAD AS SHOWN
NO PACKING
FLASHING BY BUILDER
FRA
ME
SIZE
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 6
0mm
12mm CLEARANCE
TIMBER ARCHITRAVE BY BUILDER
SILL PLATE
FLASHING BY BUILDER
ALUMINIUM OR VINYLWALL CLADDING
SILL FLAP
PACKING BY BUILDER
FIXINGS AT 450mm CENTRES
HEAD
101.6
65
FIXING BY BUILDER
101.6
SILL
47.7
TIM
BER
REV
EAL
STU
D
STU
D
WALL CLADDING
FLA
SHIN
G B
Y B
UIL
DER
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
CA
ULK
ING
FIXI
NG
S AT
45
0mm
CEN
TRES
PAC
KIN
G B
Y B
UIL
DER
101.6
35
JAM
B
OUTSIDE
Building In Detail | Cladding on Studwall
Bifold Window - Installation
BRICKWORK BRICKWORK
BRICKWORK
FLASHING BY BUILDER
BRICK SILL
SILL FLAP
FLASHING BY BUILDER
STEEL LINTEL BY BUILDER
ALUMINIUM ANGLE AND FIXING BY BUILDER
BR
ICK
OPE
NIN
G =
FR
AM
E SI
ZE +
3m
m
FRA
ME
SIZE
CEM
ENT R
END
ERC
EMEN
T REN
DER
101.6
SILL
47.7
65
101.6
HEAD
CAVITY FIXING BLOCK
FIXING BY BUILDER
OUTSIDE
BUILDING IN LUGS
BR
ICK
WO
RK
FLA
SHIN
G B
Y B
UIL
DER
FRAME SIZE
CEMENT RENDER
BR
ICK
WO
RK
BRICK OPENING = FRAME SIZE + 3mm
101.6
JAM
B
35
BU
ILD
ING
IN L
UG
S
FIXING AT450mm CENTRES
FIXI
NG
AT
450m
m C
ENTR
ES
Building In Detail | Double Brick - 280mm wall | Prepared Opening
Bifold Window - Installation
INSTALLING FRAME CORRECTLY
• Fit flashing to window surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 60mmWidth = Frame Size + 60mm
• Secure aluminum windows by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Header beam should be at least 12mm clear of window frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of windows, install sill support (refer to drawings below).
• Build-in 3mm camber to head.• Bifolds top-hung - beam must support weight.
INSTALLING FRAME CORRECTLY
• Fit flashing to window surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Brick Opening:Height = Frame Size + 3mmWidth = Frame Size + 3mm
• Secure aluminum windows by using building lug - fixing at 450mm maximum centres.
• Sill bricks should be at least 10mm clear of window frame to allow settlement in brick veneer construction.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• Build-in 3mm camber to head.• Bifolds top-hung - beam must support weight.
104103Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
OUTSIDE
TIMBER REVEAL
FLASHINGBY BUILDER
HEBEL POWER PANEL
SILL SUPPORTBY BUILDER
SILL PLATE
NO PACKING12mm CLEARANCE
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 6
0mm
FRA
ME
SIZE
10mm CLEARANCEBETWEEN SOFFIT LINING AND WINDOW HEAD
QUAD BYBUILDER
SOFFIT LINING
TIMBER ARCHITRAVE BY BUILDER
TIMBER REVEAL
FLASHINGBY BUILDER
HEADER
PACKINGBY BUILDER
FIXINGS AT450mm CENTRES
FIXINGS AT450mm CENTRES
HEAD
SILL
HEB
EL P
OW
ER P
AN
EL
FLA
SHIN
G B
Y B
UIL
DER
STU
DST
UD
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
PAC
KIN
GB
Y B
UIL
DER
FIXI
NG
S AT
450m
m C
ENTR
ES
TIM
BER
REV
EAL
JAM
B101.6
47.7
65
35
101.6
OUTSIDE
SUBSILL
RENDER BY BUILDER
SILL
HEAD
BLOCKWORK(SEALED OR PRETREATED BY BUILDER
AS PER BLOCKWORK SUPPLIER’S SPECIFICTION - TO PREVENT WATER PENETRATION)
BLO
CK
WO
RK
(SEA
LED
OR
PR
ETR
EATE
D B
Y B
UIL
DER
AS
PER
BLO
CK
WO
RK
SU
PPLI
ER’S
SPE
CIF
ICTI
ON
- TO
PR
EVEN
T W
ATER
PEN
ETR
ATIO
N)
FRAME SIZE
BLOCKWORK OPENING = FRAME SIZE + 20mm
FIXI
NG
450
CEN
TRES
AN
GLE
TR
IM B
Y B
UIL
DER
ANGLE TRIM BY BUILDERFI
XIN
G 4
50 C
ENTR
ES
REN
DER
BY
BU
ILD
ER
REN
DER
BY
BU
ILD
ER
FIXING 450 CENTRES
PACKER
FIXING 450 CENTRES
FIXING 450 CENTRES
FRA
ME
SIZE
BLO
CK
WO
RK
OPE
NIN
G =
FR
AM
E H
EIG
HT
+ 40
mm
PACKERSEALANT
101.6
65.0
61.7
35
101.6
Building In Detail | Hebel Power Panel
Bifold Window - InstallationBifold Window - InstallationBuilding In Detail | Blockwork
INSTALLING FRAME CORRECTLY
• Fit flashing to window surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 60mmWidth = Frame Size + 60mm
• Secure aluminum windows by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Caulk between render and frame.• Header beam should be at least 12mm clear of
window frame.• Do not permit weight of eaves or arch bars to bear
on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of windows, install sill support (refer to drawings below).
• Build-in 3mm camber to head.• Bifolds top-hung - beam must support weight.
INSTALLING FRAME CORRECTLY
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Blockwork Opening:Height = Frame Size + 40mmWidth = Frame Size + 20mm
• Fit subframe to opening and seal fixings.• Seal ends of subsill with angle.• Fit window to subframe (screw or pop-rivet).• Do not permit weight of eaves or arch bars to bear
on any window or door frame. (Windows and doors are not load bearing.)
• Build-in 3mm camber to head.• Bifolds top-hung - beam must support weight.
105 106
Quantum® Bifold Window
Cross Sectional Views
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend®
Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
108107Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
Two Lite | Double GlazedTwo Lite
73.0 73.073.0 73.028.6 28.628.6 28.6
50.0
50.0
7.0
7.0
65.0
65.0
48.0
48.0
47.7
47.7
103.3
30.0
30.0
60.0
60.0
18.0
35.0
35.0
35.0
35.0
16.0
35.0
16.0
16.0
16.0
outside outsideoutside outside
Bifold Window - Cross Sectional ViewBifold Window - Cross Sectional View
109 110
Quantum® Sliding Door
Features & Benefits
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend®
Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
112111Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
Sliding Door - Features & Benefits
SECURITY
• Dead lock supplied as standard.• Optional barrier, security and Prowler Proof screens available.
BUSHFIRE
HARDWARE
• Infinity Satin Chrome hardware supplied as standard**• Optional Slimline and Dura handles are available• Optional colours available are:
- Pearl White- Stone Beige- Anodic Natural Matt- Gloss Black
• Door locks can be keyed alike to other Quantum® door products for ease of use.
• Heavy duty dual roller system.
**Infinity“D”handlesuppliedasstandard(Seepicturetoprighthandcorner)
OPTIONS
• Glazing options also available in bar layout styles:- Colonial- Federation - Ovolo glazing bar style*
• Wide range of powder coating colours.• Customised WERS ratings.• Variety of sizes and custom made options available.• Variety of configuration options available.
*Ovoloonlyavailableinsingleglazing.
DELIVERY
• Protective wrapping for delivery to site comes standard for all Quantum® products.
Sliding Door - Features & Benefits
FRAME
• Robust 102mm semi commercial aluminium door frame.
• Combine with windows or can be used in integrated with Trend®’s Crestlite® commercial applications.
PANELS
• 50mm wide aluminium door panel sash section.• Individual panels can measure up to 2700mm high and
1500mm wide.• Panels can be reversed*.• Operating panels are removable - by lifting the sash up
into the head.• Panel punched holes are fitted with infill caps.• Heavy duty double bogey roller system.• Five types of interlockers are available.
*Striker holes in jamb will be visible.
SILL
• Aluminium threshold features the Easyrider sill which is ideal for wheelchair access.
• Protected rolling track – an extruded aluminium splayed threshold protects both glass door and fly door rolling tracks.
GLAZING & ENERGY EFFICIENCY
• All Trend® Windows and Doors comply with Australian Standards AS1288.
• Glazing options from 4mm single glazed to 18mm insulated glazed units (IGUs).
• Available in a range of glazing options.• Safety Grade “A” toughened glass as standard.• Energy efficiency options available to help reduce
home energy consumption.• All glazing options are Window Energy Rating Scheme
(WERS) rated - providing a wide range of energy efficient solutions.
ACOUSTICS
• Acoustic solutions available for improved noise reduction.
• High Rw ratings available.
WIND & WATER RATINGS
• All Trend® Windows and Doors are designed to meet and surpass 700Pa wind velocity rating and 150Pa water penetration rating and comply with Australian Standards AS2047.
• Pascal deflection rates up to 2200Pa.• Sliding Door rated at an air infiltration of 1.33L/s m2 .
• Xtreme® Bushfire Protection option available.
• Xtreme® options have been tested by CSIRO to meet BAL-40 - compliant to AS1530.8.1 within Australian Standards AS3959-2009.
BUILD-IN ACCESSORIES
• 180° non-load bearing couplers.• 135° non-load bearing corner couplers.• 100mm aluminium architraves for replacement door installations.• Adjustable storm mould.• Extruded aluminium 180° mullion covers to hide load bearing
posts.
113 114
Quantum® Sliding Door
Installation
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend®
Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
116115Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
FLASHINGBY BUILDER
HEAD
TIMBER REVEAL
HEADER
12mm CLEARANCE
NO PACKING
TIMBERARCHITRAVEBY BUILDER
OUTSIDE
10mm CLEARANCEBETWEEN SOFFIT LINING AND DOOR HEAD
QUAD BYBUILDER
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 4
0mm
FRA
ME
SIZE
CONCRETE SLAB
SHIMS AT 450mm MAX CTRS.
FLASHINGBY BUILDER
BRICK SILL
SILL TILE
SILL
SUMPSILL
101.6
40.0
101.6
PAC
KIN
G B
Y B
UIL
DER
FIXI
NG
S AT
450m
m C
ENTR
ES
FLA
SHIN
G B
Y B
UIL
DER
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
STU
D
TIM
BER
REV
EAL
STU
D
BR
ICK
WO
RK
JAM
B
101.
6
26.5
SOFFIT LINING
FLOORING
65.0
FLASHINGBY BUILDER
HEAD
TIMBER REVEAL
HEADER
12mm CLEARANCE
NO PACKING
TIMBERARCHITRAVEBY BUILDER
OUTSIDE
10mm CLEARANCEBETWEEN SOFFIT LINING AND DOOR HEAD
QUAD BYBUILDER
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 4
0mm
FRA
ME
SIZE
CONCRETE SLAB
SHIMS AT 450mm MAX CTRS.
FLASHINGBY BUILDER
BRICK SILL
SILL TILE
SILL
101.6
40.0
101.6
40.0
PAC
KIN
G B
Y B
UIL
DER
FIXI
NG
S AT
450m
m C
ENTR
ES
FLA
SHIN
G B
Y B
UIL
DER
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
STU
D
TIM
BER
REV
EAL
STU
D
BR
ICK
WO
RK
JAM
B
101.
6
26.5
SOFFIT LINING
FLOORING
Building In Detail | Brick Veneer - 240mm wall Building In Detail | Brick Veneer - 240mm wall | Sump Sill
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 40mmWidth = Frame Size + 60mm
• Secure aluminum door by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Sill bricks should be at least 10mm clear of door frame to allow settlement in brick veneer construction.
• Header beam should be at least 12mm clear of door frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of doors, sill must be fully supported.
• Ensure outside finish does not block sill drainage holes.
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 40mmWidth = Frame Size + 60mm
• Secure aluminum door by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Sill bricks should be at least 10mm clear of door frame to allow settlement in brick veneer construction.
• Header beam should be at least 12mm clear of door frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of doors, sill must be fully supported.
• Ensure outside finish does not block sill drainage holes.
Sliding Door - Installation Sliding Door - Installation
118117Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Brick Opening:Height = Frame Size + 3mmWidth = Frame Size + 3mm
• Secure aluminum doors using building lug into mortor - fixing at 50mm max centres
• Sill bricks should be at least10 mm clear of window frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of doors, sill must be fully supported.
• Ensure outside finish does not block sill drainage holes.
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Brick Opening:Height = Frame Size + 3mmWidth = Frame Size + 3mm
• Secure aluminum doors using building lug into mortor - fixing at 450mm max centres
• Sill bricks should be at least10 mm clear of window frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• Ensure outside finish does not block sill drainage holes.
OUTSIDE
FRA
ME
SIZE
BR
ICK
OPE
NIN
G =
FR
AM
E SI
ZE +
3m
m
FLASHING BY BUILDER
BRICKWORK
CAVITY FIXING BLOCK
BRICKWORK
CEMENT RENDER
STEEL LINTEL BY BUILDER
SILL TILE
MORTAR
SHIMS AT 450mm MAX CTRS.
FLASHING BY BUILDER
BRICK SILL
REBATED CONCRETE FLOOR SLAB
40.0
101.6
HEAD
40.0
101.6
SILL
FRAME SIZE
BRICK OPENING = FRAME SIZE + 3mm
FLA
SHIN
GB
Y B
UIL
DER
CEMENT RENDER
BR
ICK
WO
RK
BU
ILD
ING
IN L
UG
S AT
450m
m C
ENTR
ESB
RIC
KW
OR
K
26.5
101.
6
JAM
B
FLOORING
OUTSIDE
FRA
ME
SIZE
BR
ICK
OPE
NIN
G =
FR
AM
E SI
ZE +
3m
m
FLASHING BY BUILDER
BRICKWORK
CAVITY FIXING BLOCK
BRICKWORK
CEMENT RENDER
STEEL LINTEL BY BUILDER
SILL TILE
MORTAR
SHIMS AT 450mm MAX CTRS.
FLASHING BY BUILDER
BRICK SILLREBATED CONCRETE FLOOR SLAB
40.0
101.6
HEAD
65.0
101.6
SILL
SUMPSILL
FRAME SIZE
BRICK OPENING = FRAME SIZE +3mm
FLA
SHIN
GB
Y B
UIL
DER
CEMENT RENDER
BR
ICK
WO
RK
BU
ILD
ING
IN L
UG
S AT
450m
m C
ENTR
ESB
RIC
KW
OR
K
26.5
101.
6
JAM
B
FLOORING
Building In Detail | Double Brick - 280mm wall Building In Detail | Double Brick - 280mm wall | Sump Sill
Sliding Door - Installation Sliding Door - Installation
120119Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Brick Opening:Height = Frame Size + 3mmWidth = Frame Size + 3mm
• Secure aluminum doors using building lug into mortor - fixing at 450mm max centres
• Sill bricks should be at least10 mm clear of window frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of doors, sill must be fully supported.
• Ensure outside finish does not block sill drainage holes.
OUTSIDE
FRA
ME
SIZE
BR
ICK
OPE
NIN
G =
FR
AM
E SI
ZE +
3mm
FLASHING BY BUILDER
BRICKWORK
CAVITY FIXING BLOCK
BRICKWORK
CEMENT RENDER
STEEL LINTEL BY BUILDER
SILL TILESHIMS AT 450mm MAX CTRS.
FLASHING BY BUILDER
BRICK SILLREBATED CONCRETE FLOOR SLAB
40.0
101.6
HEAD
40.0
101.6
SILL
FLOORING
FRAME SIZE
BRICK OPENING = FRAME SIZE + 3mm
FLA
SHIN
GB
Y B
UIL
DER
CEMENT RENDER
BR
ICK
WO
RK
26.5
101.
6
JAM
B
FIXI
NG
AT
450m
m C
ENTR
ES
Building In Detail | Double Brick - 280mm wall | Prepared Opening
Sliding Door - Installation
INSTALLING FRAME CORRECTLY
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Blockwork Opening:Height = Frame Size + 80mmWidth = Frame Size + 20mm
• Fit subframe to opening and seal fixings.• Fit window to subframe (screw or pop-rivet).• Do not permit weight of eaves or arch bars to bear
on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of doors, sill must be fully supported.
• Ensure outside finish does not block sill drainage holes.
OUTSIDE
101.6
101.6
51.0
55.0
SUBSILL
SILL
HEAD
SUBHEAD
BLOCKWORK(SEALED OR PRETREATED BY BUILDER
AS PER BLOCKWORK SUPPLIER’S SPECIFICTION - TO PREVENT WATER PENETRATION)
FIXING 450 CENTRES
PACKERSEALANT
FIXING 450 CENTRES
FIXING 450 CENTRES
SEALANT
FRA
ME
SIZE
BLO
CK
WO
RK
OPE
NIN
G =
FR
AM
E H
EIG
HT
+ 80
mm
PACKER
SEALANT
FLOORING
35
101,
6
JAM
B
BLO
CK
WO
RK
(SEA
LED
OR
PR
ETR
EATE
D B
Y B
UIL
DER
AS
PER
BLO
CK
WO
RK
SU
PPLI
ER’S
SPE
CIF
ICTI
ON
- TO
PR
EVEN
T W
ATER
PEN
ETR
ATIO
N)
FRAME SIZE
BLOCKWORK OPENING = FRAME SIZE + 20mm
FIXI
NG
450
CEN
TRES
AN
GLE
TR
IM B
Y B
UIL
DER
FIXI
NG
450
CEN
TRES
REN
DER
BY
BU
ILD
ER
REN
DER
BY
BU
ILD
ER
FIXING 450 CENTRES
Building In Detail | Blockwork
Sliding Door - Installation
122121Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
OUTSIDE
NO PACKING
TIMBER REVEAL
HEADER
TIMBERARCHITRAVEBY BUILDER
FLOORING
FRA
ME
SIZE
SILL SUPPORT
FLASHING BY BUILDER
40.0
101.6
HEAD
101.6
40.0SILL
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 4
0mm
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
FIXI
NG
S AT
450
mm
CEN
TRES
PAC
KIN
G B
Y B
UIL
DER
TIM
BER
REV
EAL
FLA
SHIN
G
BY
BU
ILD
ER
WALL CLADDING
JAM
B
101.
6
26.5
OUTSIDE
NO PACKING
TIMBER REVEAL
HEADER
TIMBERARCHITRAVEBY BUILDER
FLOORING
FRA
ME
SIZE
SILL SUPPORT
FLASHING BY BUILDER
40.0
101.6
HEAD
101.6
65.0SILL
SUMPSILL
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 4
0mm
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
FIXI
NG
S AT
450
mm
CEN
TRES
PAC
KIN
G B
Y B
UIL
DER
TIM
BER
REV
EAL
FLA
SHIN
G
BY
BU
ILD
ER
WALL CLADDING
JAM
B
101.
6
26.5
Building In Detail | Cladding on Studwall Building In Detail | Cladding on Studwall | Sump Sill
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 40mmWidth = Frame Size + 60mm
• Secure aluminum door by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Header beam should be at least 12mm clear of window frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of doors, install sill support (refer to drawings below).
• Ensure outside finish does not block sill drainage holes.
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 40mmWidth = Frame Size + 60mm
• Secure aluminum door by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Header beam should be at least 12mm clear of window frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of doors, install sill support (refer to drawings below).
• Ensure outside finish does not block sill drainage holes.
Sliding Door - Installation Sliding Door - Installation
124123Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
Building In Detail | Hebel Power Panel Building In Detail | Hebel Power Panel | Sump Sill
Sliding Door - Installation Sliding Door - Installation
RENDERBY BUILDER
FLOORING
HEBEL POWER PANEL
SILL
FRA
ME
SIZE
HEB
EL P
OW
ER P
AN
EL
FLA
SHIN
G B
Y B
UIL
DER
STU
DST
UD
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
PAC
KIN
GB
Y B
UIL
DER
FIXI
NG
S AT
450m
m C
ENTR
ES
TIM
BER
REV
EAL
JAM
B
OUTSIDE
NO PACKING12mm CLEARANCE
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 4
0mm 10mm CLEARANCE
BETWEEN SOFFIT LINING AND WINDOW HEAD
QUAD BYBUILDER
SOFFIT LINING
TIMBER ARCHITRAVEBY BUILDER
TIMBER REVEAL
FLASHINGBY BUILDER
HEADER
101.6
101.6
40.0
26.5
HEAD
SILL TILERENDERBY BUILDER
FLOORING
HEBEL POWER PANEL
SILL
SUMPSILL
FRA
ME
SIZE
HEB
EL P
OW
ER P
AN
EL
FLA
SHIN
G B
Y B
UIL
DER
STU
DST
UD
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
PAC
KIN
GB
Y B
UIL
DER
FIXI
NG
S AT
450m
m C
ENTR
ES
TIM
BER
REV
EAL
JAM
B
OUTSIDE
NO PACKING12mm CLEARANCE
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 4
0mm
10mm CLEARANCEBETWEEN SOFFIT LINING AND WINDOW HEAD
QUAD BYBUILDER
SOFFIT LINING
TIMBERARCHITRAVEBY BUILDER
TIMBER REVEAL
FLASHINGBY BUILDER
HEADER
101.6
101.6
65.0
26.5
HEAD
SILL TILE
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 40mmWidth = Frame Size + 60mm
• Secure aluminum door by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Header beam should be at least 12mm clear of window frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• Caulking between render and frame• To ensure the satisfactory long term performance of
doors, sill must be fully supported.• Ensure outside finish does not block sill drainage
holes
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 40mmWidth = Frame Size + 60mm
• Secure aluminum door by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Header beam should be at least 12mm clear of window frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• Caulking between render and frame• To ensure the satisfactory long term performance of
doors, sill must be fully supported.• Ensure outside finish does not block sill drainage
holes
125 126
Quantum® Sliding Door
Cross Sectional Views
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend®
Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
128127Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
Two Panel | FXTwo Panel | FX
73.0 73.073.0
28.6 28.628.6
40.0
40.0
26.5
53.3
40.0
40.0
26.5
40.0
101.6 101.6
10.2
10.2
48.0
outside outsideoutside
Sliding Door - Cross Sectional ViewSliding Door - Cross Sectional View
130129Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
Two Panel | FX | Double GlazedTwo Panel | FX | Double Glazed
Sliding Door - Cross Sectional ViewSliding Door - Cross Sectional View
73.0 73.028.6 28.6
40.0
40.0
53.3
40.040.0
101.6 101.6
10.2
10.2
outside outside
73.028.6
26.526.5
48.0
outside
132131Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
Three Panel | FXFThree Panel | FXF
73.0 73.0
73.0
73.028.6 28.6
28.6
28.6
40.0
40.0
40.042.9
40.0
40.041.8
53.3
10.2
10.2
outside outside outside
Sliding Door - Cross Sectional ViewSliding Door - Cross Sectional View
134133Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
Three Panel | FXF Four Panel | FXXF
48.0
48.0
102.6
102.648.0
26.5
26.526.5
26.5outside
outside
Sliding Door - Cross Sectional View
73.0
73.0
28.6
28.6
Sliding Door - Cross Sectional View
135 136
Quantum® Sliding Stacker Door
Features & Benefits
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend®
Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
138137Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
Sliding Stacker Door - Features & BenefitsSliding Stacker Door - Features & Benefits
SECURITY
• Dead lock supplied as standard.• Optional security, barrier and Prowler Proof screens available.
HARDWARE
• Infinity Satin Chrome hardware supplied as standard**• Optional Slimline and Dura handles are available• Optional colour available are:
- Pearl White- Stone Beige- Anodic Natural Matt- Gloss Black
• Door locks can be keyed alike to other Quantum® products for ease of use.
• Heavy duty dual roller system.
**Infinity“D”handlesuppliedasstandard(seepictureright).
BUILD-IN ACCESSORIES
• 180° non-load bearing couplers.• 135° non-load bearing corner couplers.• 100mm aluminium architraves for replacement door installations.• Adjustable storm mould.• Extruded aluminium 180° mullion covers to hide load bearing
posts.
OPTIONS
• Glazing options also available in bar layout styles:- Colonial- Federation - Ovolo glazing bar style*
• Wide range of powder coating colours.• Customised WERS ratings.• Variety of sizes and custom made options available.• Variety of configuration options available.
*Ovoloonlyavailableinsingleglazing.
FRAME
• Robust 102mm semi commercial aluminium door frame (160mm with flyscreen tracks).
• Combine with windows or can be used in integrated with Trend®’s Crestlite® commercial applications. Note:IfSlidingStackerDoorhasascreentrackitcannotbecoupledwithotherQuantumproducts.
PANELS
• 50mm wide aluminium door panel sash section.• Individual panels can measure up to 2700mm high and
1500mm wide.• Head, sill and jamb all have infills for clean lines• Panels can be reversed*.• Operating panels are removable - by lifting the panel
up into the head.• Panel punched holes are fitted with infill caps.• Heavy duty double bogey roller system.• Five types of interlockers are available.
*Striker holes in jamb will be visible.
SILL
• Aluminium threshold features the Easyrider sill which is ideal for wheelchair access.
• Protected rolling track – an extruded aluminium splayed threshold protects both glass door and fly door rolling tracks.
• Easy fit adaptor for flyscreens available.
GLAZING & ENERGY EFFICIENCY
• All Trend® Windows and Doors comply with Australian Standards AS1288.
• Glazing options from 4mm single glazed to 18mm insulated glazed units (IGUs) .
• Safety Grade “A” toughened glass as option. • Available in a range of glazing options.• Energy efficiency options available to help reduce
home energy consumption.• All glazing options are Window Energy Rating Scheme
(WERS) rated - providing a wide range of energy efficient solutions.
ACOUSTICS
• Acoustic solutions available for improved noise reduction.
• High Rw ratings available.
BUSHFIRE
WIND RATINGS
• All Trend® Windows and Doors are designed to meet and surpass 700Pa wind velocity rating and 150Pa water penetration rating and comply with Australian Standards AS2047.
• Pascal deflection rates up to 2200Pa.• Sliding Stacker Door rated at an air infiltration of 1.33L/s m2 .
• Xtreme® Bushfire Protection option available.
• Xtreme® options have been tested by CSIRO to meet BAL-40 - compliant to AS1530.8.1 within Australian Standards AS3959-2009.
DELIVERY
• Protective wrapping for delivery to site comes standard for all Quantum® products.
139 140
Quantum® Sliding Stacker Door
Installation
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend®
Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
142141Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
FLASHING BY BUILDER
SILL TILE
10mm CLEARANCEBETWEEN SOFFIT LINING AND DOOR HEAD
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 4
0mm
FRA
ME
SIZE
OUTSIDE
QUAD BYBUILDER
40.0
TIMBERARCHITRAVEBY BUILDER
MORTAR
SILL
SUMPSILL
162.1
65.0
HEAD
162.1
HEADER
FLASHINGBY BUILDER
TIMBER REVEAL
12mm CLEARANCE
SOFFIT LINING
NO PACKING
SHIMS AT 450MM MAX CENTRES
CONCRETE FLOOR SLAB
FLYSCREEN HEAD
FLYSCREEN SILL
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
BR
ICK
WO
RK
FLA
SHIN
G B
Y B
UIL
DER
FIXI
NG
S AT
450m
m C
ENTR
ES
STU
D
PAC
KIN
G B
Y B
UIL
DER
162.
1
JAM
B
TIM
BER
REV
EAL
26.5
FLYS
CR
EEN
JA
MB
FLOORING
FLASHING BY BUILDER
SILL TILE
10mm CLEARANCEBETWEEN SOFFIT LINING AND DOOR HEAD
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 4
0mm
FRA
ME
SIZE
OUTSIDE
QUAD BYBUILDER
40.0
TIMBER ARCHITRAVE BY BUILDER
MORTAR
SILL
162.1
40.0
HEAD
162.1
HEADER
FLASHINGBY BUILDER
TIMBER REVEAL
12mm CLEARANCE
SOFFIT LINING
NO PACKING
SHIMS AT 450MM MAX CENTRES
CONCRETE FLOOR SLAB
FLYSCREEN HEAD
FLYSCREEN SILL
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
BR
ICK
WO
RK
FLA
SHIN
G B
Y B
UIL
DER
FIXI
NG
S AT
450m
m C
ENTR
ES
STU
D
PAC
KIN
G B
Y B
UIL
DER
162.
1
JAM
B
TIM
BER
REV
EAL
26.5
FLYS
CR
EEN
JA
MB
FLOORING
Building In Detail | Brick Veneer - 240mm wall Building In Detail | Brick Veneer - 240mm wall | Sump Sill
Sliding Stacker Door - Installation Sliding Stacker Door - Installation
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 40mmWidth = Frame Size + 60mm
• Secure aluminum door by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Sill bricks should be at least 10mm clear of door frame to allow settlement in brick veneer construction.
• Header beam should be at least 12mm clear of door frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of doors, sill must be fully supported.
• Ensure outside finish does not block sill drainage holes.
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 40mmWidth = Frame Size + 60mm
• Secure aluminum door by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Sill bricks should be at least 10mm clear of door frame to allow settlement in brick veneer construction.
• Header beam should be at least 12mm clear of door frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of doors, sill must be fully supported.
• Ensure outside finish does not block sill drainage holes.
144143Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
FLASHING BY BUILDER
SILL TILE
10mm CLEARANCEBETWEEN SOFFIT LINING AND DOOR HEAD
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 4
0mm
FRA
ME
SIZE
OUTSIDE
QUAD BYBUILDER
40.0
TIMBERARCHITRAVEBY BUILDER
MORTAR
SILL
SUMPSILL
162.1
65.0
HEAD
162.1
HEADER
FLASHINGBY BUILDER
TIMBER REVEAL
12mm CLEARANCE
SOFFIT LINING
NO PACKING
SHIMS AT 450MM MAX CENTRES
CONCRETE FLOOR SLAB
FLYSCREEN HEAD
FLYSCREEN SILL
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
BR
ICK
WO
RK
FLA
SHIN
G B
Y B
UIL
DER
FIXI
NG
S AT
450m
m C
ENTR
ES
STU
D
PAC
KIN
G B
Y B
UIL
DER
162.
1
JAM
B
TIM
BER
REV
EAL
26.5
FLYS
CR
EEN
JA
MB
FLOORING
FLASHING BY BUILDER
SILL TILE
10mm CLEARANCEBETWEEN SOFFIT LINING AND DOOR HEAD
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 4
0mm
FRA
ME
SIZE
OUTSIDE
QUAD BYBUILDER
40.0
TIMBERARCHITRAVEBY BUILDER
MORTAR
SILL
162.1
40.0
HEAD
162.1
HEADER
FLASHINGBY BUILDER
TIMBER REVEAL
12mm CLEARANCE
SOFFIT LINING
NO PACKING
SHIMS AT 450MM MAX CENTRES
CONCRETE FLOOR SLAB
FLYSCREEN HEAD
FLYSCREEN SILL
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
BR
ICK
WO
RK
FLA
SHIN
G B
Y B
UIL
DER
FIXI
NG
S AT
450m
m C
ENTR
ES
STU
D
PAC
KIN
G B
Y B
UIL
DER
162.
1
JAM
B
TIM
BER
REV
EAL
26.5
FLYS
CR
EEN
JA
MB
FLOORING
Building In Detail | Brick Veneer - 240mm wall | Rebated Building In Detail | Brick Veneer - 240mm wall | Rebated | Sump Sill
Sliding Stacker Door - Installation Sliding Stacker Door - Installation
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 40mmWidth = Frame Size + 60mm
• Secure aluminum door by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Sill bricks should be at least 10mm clear of door frame to allow settlement in brick veneer construction.
• Header beam should be at least 12mm clear of door frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of doors, sill must be fully supported.
• Ensure outside finish does not block sill drainage holes.
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 40mmWidth = Frame Size + 60mm
• Secure aluminum door by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Sill bricks should be at least 10mm clear of door frame to allow settlement in brick veneer construction.
• Header beam should be at least 12mm clear of door frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of doors, sill must be fully supported.
• Ensure outside finish does not block sill drainage holes.
146145Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
BRICKWORK
FLASHING BY BUILDER
10mm CLEARANCEBETWEEN SOFFIT LINING AND DOOR HEAD
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 4
0mm
FRA
ME
SIZE
OUTSIDE
QUAD BYBUILDER
40.0
TIMBERARCHITRAVEBY BUILDER
SILL
162.1
40.0
HEAD
162.1
HEADER
FLASHINGBY BUILDER
TIMBER REVEAL
12mm CLEARANCE
SOFFIT LINING
NO PACKING
FLYSCREEN HEAD
FLYSCREEN SILL
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
BR
ICK
WO
RK
FLA
SHIN
G B
Y B
UIL
DER
FIXI
NG
S AT
450m
m C
ENTR
ES
STU
D
PAC
KIN
G B
Y B
UIL
DER
162.
1
JAM
B
TIM
BER
REV
EAL
26.5
FLYS
CR
EEN
JA
MB
FLOORING
TIMBERJOIST
SILLSUPPORT
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 40mmWidth = Frame Size + 60mm
• Secure aluminum door by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Sill bricks should be at least 10mm clear of door frame to allow settlement in brick veneer construction.
• Header beam should be at least 12mm clear of door frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of door, install sill support (refer to drawings below).
• Ensure outside finish does not block sill drainage holes.
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 40mmWidth = Frame Size + 60mm
• Secure aluminum door by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Sill bricks should be at least 10mm clear of door frame to allow settlement in brick veneer construction.
• Header beam should be at least 12mm clear of door frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of door, install sill support (refer to drawings below).
• Ensure outside finish does not block sill drainage holes.
BRICKWORK
FLASHING BY BUILDER
10mm CLEARANCEBETWEEN SOFFIT LINING AND DOOR HEAD
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 4
0mm
FRA
ME
SIZE
OUTSIDE
QUAD BYBUILDER
40.0
TIMBERARCHITRAVEBY BUILDER
SILL
SUMPSILL
162.1
65.0
HEAD
162.1
HEADER
FLASHINGBY BUILDER
TIMBER REVEAL
12mm CLEARANCE
SOFFIT LINING
NO PACKING
FLYSCREEN HEAD
FLYSCREEN SILL
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
BR
ICK
WO
RK
FLA
SHIN
G B
Y B
UIL
DER
FIXI
NG
S AT
450m
m C
ENTR
ES
STU
D
PAC
KIN
G B
Y B
UIL
DER
162.
1
JAM
B
TIM
BER
REV
EAL
26.5
FLYS
CR
EEN
JA
MB
FLOORING
TIMBERJOIST
SILLSUPPORT
Building In Detail | Brick Veneer - 240mm wall | Joists Building In Detail | Brick Veneer - 240mm wall | Joists | Sump Sill
Sliding Stacker Door - Installation Sliding Stacker Door - Installation
148147Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
CONCRETE FLOOR SLAB
40.0
162.1
162.1
FLYSCREEN HEAD
FLYSCREEN SILL
HEAD
SILL BRICK
SILL
SUMPSILL
SILL TILE
FRA
ME
SIZE
65.0
SHIMS AT 450MM MAX CENTRES
BRICKWORK
FLASHING BY BUILDER
BR
ICK
OPE
NIN
G =
FR
AM
E SI
ZE +
3m
m
CAVITY BLOCK AT 900MM CENTRES
STEEL LINTEL BY BUILDER
CEMENT RENDER
BRICKWORK
BU
ILD
ING
IN L
UG
S AT
450m
m C
ENTR
ES
CEMENT RENDER
FLA
SHIN
GB
Y B
UIL
DER
BR
ICK
WO
RK
162.
1
JAM
B
FRAME SIZE
BRICK OPENING = FRAME SIZE + 3mm
26.5
BR
ICK
WO
RK
FLYS
CR
EEN
JA
MB
FLASHING BY BUILDER
FLOORING
SILL BRICKCONCRETE FLOOR SLAB
40.0
162.1
162.1
FLYSCREEN HEAD
FLYSCREEN SILL
HEAD
SILLSILL TILE
FRA
ME
SIZE
40.0
SHIMS AT 450MM MAX CENTRES
BRICKWORK
FLASHING BY BUILDER
BR
ICK
OPE
NIN
G =
FR
AM
E SI
ZE +
3m
m
CAVITY BLOCK AT 900MM CENTRES
STEEL LINTEL BY BUILDER
CEMENT RENDER
BRICKWORK
BU
ILD
ING
IN L
UG
S AT
450m
m C
ENTR
ES
CEMENT RENDER
FLA
SHIN
GB
Y B
UIL
DER
BR
ICK
WO
RK
162.
1
JAM
B
FRAME SIZE
BRICK OPENING = FRAME SIZE + 3mm
26.5
BR
ICK
WO
RK
FLYS
CR
EEN
JA
MB
FLASHING BY BUILDER
FLOORING
Building In Detail | Double Brick - 280mm wall | Sump SillBuilding In Detail | Double Brick - 280mm wall
Sliding Stacker Door - InstallationSliding Stacker Door - Installation
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Brick Opening:Height = Frame Size + 3mmWidth = Frame Size + 3mm
• Secure aluminum doors using building lug into mortor - fixing at 450mm max centres
• Sill bricks should be at least10 mm clear of window frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of door, install sill support (refer to drawings below).
• Ensure outside finish does not block sill drainage holes.
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Brick Opening:Height = Frame Size + 3mmWidth = Frame Size + 3mm
• Secure aluminum doors using building lug into mortor - fixing at 450mm max centres
• Sill bricks should be at least10 mm clear of window frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of door, install sill support (refer to drawings below).
• Ensure outside finish does not block sill drainage holes.
150149Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
OUTSIDE
PACKER
SEALANT
BACKING ROD & SEALANT
SUPPORTBRACKETS
BLOCKWORK(SEALED OR PRETREATED BY BUILDER
AS PER BLOCKWORK SUPPLIER’S SPECIFICTION - TO PREVENT WATER PENETRATION)
BLOCKWORK(SEALED OR PRETREATED BY BUILDER
AS PER BLOCKWORK SUPPLIER’S SPECIFICTION - TO PREVENT WATER PENETRATION)
FIXING 450 CENTRES
REN
DER
BY
BU
ILD
ER
FLOORING
SUB HEAD
HEAD
SILL
SUB SILL
FRA
ME
SIZE
BLO
CK
WO
RK
OPE
NIN
G =
FR
AM
E H
EIG
HT
+ 80
mm
PACKER
RENDER BY BUILDER
FRAME SIZE
BLO
CK
WO
RK
(SEA
LED
OR
PR
ETR
EATE
D B
Y B
UIL
DER
AS
PER
BLO
CK
WO
RK
SU
PPLI
ER’S
SPE
CIF
ICTI
ON
- TO
PR
EVEN
T W
ATER
PEN
ETR
ATIO
N)
FIXI
NG
450
CEN
TRES
AN
GLE
TR
IM B
Y B
UIL
DER
FIXI
NG
450
CEN
TRES
REN
DER
BY
BU
ILD
ER
BLOCKWORK OPENING = FRAME SIZE + 20mm
JAM
B
REN
DER
BY
BU
ILD
ER
84.5
162.1
162.1
162.
1
FLYSCREEN HEAD
FLYSCREEN SILL
FLYS
CR
EEN
JA
MB
26.5
50.0
SILL BRICK
CONCRETE FLOOR SLAB
40.0
162.1
162.1
FLYSCREEN HEAD
FLYSCREEN SILL
HEAD
SILLSILL TILE
FRA
ME
SIZE
40.0
SHIMS AT 450MM MAX CENTRES
BRICKWORK
FLASHING BY BUILDER
BR
ICK
OPE
NIN
G =
FR
AM
E SI
ZE +
3m
m
CAVITY BLOCK AT 900MM CENTRES
STEEL LINTEL BY BUILDER
CEMENT RENDER
BRICKWORK
FLASHING BY BUILDER
FLOORING
CEMENT RENDER
FLA
SHIN
GB
Y B
UIL
DER
BR
ICK
WO
RK
162.
1
JAM
B
FRAME SIZE
BRICK OPENING = FRAME SIZE + 3mm
26.5B
RIC
KW
OR
K
FLYS
CR
EEN
JA
MB
BU
ILD
ING
IN L
UG
S
FIXI
NG
AT
450m
m C
ENTR
ES
Building In Detail | Blockwork
Sliding Stacker Door - InstallationBuilding In Detail | Double Brick - 280mm wall | Prepared Opening
Sliding Stacker Door - Installation
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Brick Opening:Height = Frame Size + 3mmWidth = Frame Size + 3mm
• Secure aluminum doors using building lug into mortor - fixing at 450mm max centres
• Sill bricks should be at least10 mm clear of window frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• Ensure outside finish does not block sill drainage holes.
INSTALLING FRAME CORRECTLY
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Blockwork Opening:Height = Frame Size + 80mmWidth = Frame Size + 20mm
• Fit subframe to opening and seal fixings.• Fit window to subframe (screw or pop-rivet).• Do not permit weight of eaves or arch bars to bear
on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of window, install sill support (refer to drawings below).
• Ensure outside finish does not block sill drainage holes.
152151Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
WALL CLADDING
40.0
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 4
0mm
TIMBERARCHITRAVEBY BUILDER
162.1
HEAD
162.1
40.0
SILL
FRA
ME
SIZE
FLASHING BY BUILDER
DRESS SARKING INTO CLADDING 'U' TRIM AT HEAD
WALL CLADDING
HEADER
NO PACKING
TIMBER REVEAL
12mm CLEARANCE
CAULKING
FLYSCREEN HEAD
SUPPORT BY BUILDER
FLYSCREEN SILL
STU
D
FIXI
NG
S AT
450
mm
CEN
TRES
PAC
KIN
G B
Y B
UIL
DER
WA
LL C
LAD
DIN
G
TIM
BER
REV
EAL
162.
1
JAM
B
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
FLYS
CR
EEN
JA
MB
CA
ULK
ING
FLASHING BY BUILDER
CONCRETE FLOOR SLAB
FLOORING
26.5
WALL CLADDING
40.0
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 4
0mm
TIMBERARCHITRAVEBY BUILDER
162.1
HEAD
162.1
65.0
SILL
SUMPSILL
FRA
ME
SIZE
FLASHING BY BUILDER
DRESS SARKING INTO CLADDING 'U' TRIM AT HEAD
WALL CLADDING
HEADER
NO PACKING
TIMBER REVEAL
12mm CLEARANCE
CAULKING
FLYSCREEN HEAD
SUPPORT BY BUILDER
FLYSCREEN SILL
STU
D
FIXI
NG
S AT
450
mm
CEN
TRES
PAC
KIN
G B
Y B
UIL
DER
WA
LL C
LAD
DIN
G
TIM
BER
REV
EAL
162.
1
JAM
B
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
FLYS
CR
EEN
JA
MB
CA
ULK
ING
FLASHING BY BUILDER
CONCRETE FLOOR SLAB
FLOORING
26.5
Building In Detail | Cladding on Studwall Building In Detail | Cladding on Studwall | Sump Sill
Sliding Stacker Door - Installation Sliding Stacker Door - Installation
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 40mmWidth = Frame Size + 60mm
• Secure aluminum door by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Header beam should be at least 12mm clear of window frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of doors, install sill support (refer to drawings below).
• Ensure outside finish does not block sill drainage holes
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 40mmWidth = Frame Size + 60mm
• Secure aluminum door by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Header beam should be at least 12mm clear of window frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of doors, install sill support (refer to drawings below).
• Ensure outside finish does not block sill drainage holes
154153Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
40.0
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 4
0mm
TIMBERARCHITRAVEBY BUILDER
162.1
HEAD
162.1
37.0
FRA
ME
SIZE
FLASHING BY BUILDER
HEADER
NO PACKING
TIMBER REVEAL
12mm CLEARANCE
FLYSCREEN HEAD
TRIM BY BUILDER
FLYSCREEN SILL
STU
D
FIXI
NG
S AT
450
mm
CEN
TRES
PAC
KIN
G B
Y B
UIL
DER
TIM
BER
REV
EAL
162.
1
JAM
B
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
FLYS
CR
EEN
JA
MB
CA
ULK
ING
FLASHING BY BUILDER
RENDERBY BUILDER
FLOORING
HEBEL POWER PANEL
SILL TILE
SILL
26.5
HEB
EL P
OW
ER P
AN
EL
FLA
SHIN
G B
Y B
UIL
DER
OUTSIDE
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 4
0mm
TIMBERARCHITRAVEBY BUILDER
162.1
66SILL
FRA
ME
SIZE
TRIM BY BUILDER
FLYSCREEN SILL
FLASHING BY BUILDER
RENDERBY BUILDER
FLOORING
HEBEL POWER PANEL
SILL TILE
SUMPSILL
STU
D
FIXI
NG
S AT
450
mm
CEN
TRES
PAC
KIN
G B
Y B
UIL
DER
TIM
BER
REV
EAL
162.
1
JAM
B
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
FLYS
CR
EEN
JA
MB
CA
ULK
ING
26.5
HEB
EL P
OW
ER P
AN
EL
FLA
SHIN
G B
Y B
UIL
DER
40.0
162.1
HEAD
FLASHING BY BUILDER
HEADER
NO PACKING
TIMBER REVEAL
12mm CLEARANCE
FLYSCREEN HEAD
OUTSIDE
Building In Detail | Hebel Power Panel Building In Detail | Hebel Power Panel | Sump Sill
Sliding Stacker Door - Installation Sliding Stacker Door - Installation
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 40mmWidth = Frame Size + 60mm
• Secure aluminum door by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Header beam should be at least 12mm clear of window frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of doors, install sill support (refer to drawings below).
• Caulking between render and frame• Ensure outside finish does not block sill drainage
holes
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 40mmWidth = Frame Size + 60mm
• Secure aluminum door by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Header beam should be at least 12mm clear of window frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of doors, install sill support (refer to drawings below).
• Caulking between render and frame• Ensure outside finish does not block sill drainage
holes
155 156
Quantum® Sliding Stacker Door
Cross Sectional Views
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend®
Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
158157Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
Three Panel | FXXThree Panel | FXX
73.089.1
40.0
10.6
40.030.7
162.1
40.042.9
40.041.9
outside outsideoutside
Sliding Stacker Door - Cross Sectional ViewSliding Stacker Door - Cross Sectional View
160159Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
Six Panel | FXXXXF Three Panel | FXX
Sliding Stacker Door - Cross Sectional ViewSliding Stacker Door - Cross Sectional View
73.088.6
26.526.5
48.0
48.0
43.3
26.5
88.6 73.0
26.5
outside
73.088.6
48.0
48.0
26.5
48.0102.6
48.0
outside
161 162
Quantum® Bifold Door
Features & Benefits
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend®
Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
164163Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
SECURITY
• Infinity night latch key lock hardware supplied as standard• Mortice lock mechanism pulls the door panels in tight in the
center, top and bottom locking the doors securely.
FRAME
• Robust 102mm semi commercial aluminium door frame.
PANEL
• 62mm door sash stile• Durable bifold panels.• Individual panels can measure up to 2400mm high
and 900mm wide. (Note: 2700mm high in Heavy Duty panel and 1000mm wide is available)
• Sash punched holes are fitted with infill caps.*Panels configure to open out only.
SILL
• If no sill is required option is available for clear alfresco walkway.* *Nosilloptiondoesnotmeetwaterandwindrequirements.
GLAZING & ENERGY EFFICIENCY
• All Trend® Windows and Doors comply with Australian Standards AS1288.
• Glazing options from 4mm single glazed to 18mm insulated glazed units (IGUs) .
• Available in a range of glazing option.• Energy efficiency options available to help reduce
home energy consumption.• All glazing options are Window Energy Rating Scheme
(WERS) rated - providing a wide range of energy efficient solutions.
ACOUSTICS
• Acoustic solutions available for improved noise reduction.
• High Rw ratings available .
WIND & WATER RATINGS
• All Trend® Windows and Doors are designed to meet and surpass 700Pa wind velocity rating and 150Pa water penetration rating and comply with Australian Standards AS2047.
• Pascal deflection rates up to 2200Pa.• Bifold door rated at an air infiltration of 0.67L/s m2.
Bifold Door - Features & BenefitsBifold Door - Features & Benefits
BUSHFIRE
• Xtreme® Bushfire Protection option is available**.
• Xtreme® options have been tested by CSIRO to meet BAL-40 - compliant to AS1530.8.1 within Australian Standards AS3959-2009.
**Maxdoorwidthforbushfirezonesis2400mm
HARDWARE
• Infinity Satin Chrome hardware supplied as standard.• Infinity bifold lock include night latch feature - locking doors
when handle is in verticle position.• Optional colours are available:
- Pearl White- Stone Beige- Anodic Natural Matt- Gloss Black
• Door locks can be keyed alike to other Quantum® door products for ease of use.
• Hinges made out of durable stainless steel - optional black color is also available.
OPTIONS
• Glazing options also available in bar layout styles:- Colonial- Federation - Ovolo glazing bar style*
• Wide range of powder coating colours.• Customised WERS ratings.• Variety of sizes and custom made options available.• Variety of configuration options available.
*Ovoloonlyavailableinsingleglazing.
DELIVERY
• Protective wrapping for delivery to site comes standard for all Quantum® products.
165 166
Quantum® Bifold Door
Installation
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend®
Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
168167Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
FLASHINGBY BUILDER
HEAD
TIMBER REVEAL
HEADER
12mm CLEARANCE
NO PACKING
TIMBERARCHITRAVEBY BUILDER
OUTSIDE
10mm CLEARANCEBETWEEN SOFFIT LINING AND DOOR HEAD
QUAD BYBUILDER
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 4
0mm
FRA
ME
SIZE
FLASHINGBY BUILDER
BRICK SILLSILL TILE
FIXING BY BUILDER
65
101.6
101.6
SILL 47.7
PAC
KIN
G B
Y B
UIL
DER
FIXI
NG
S AT
450m
m C
ENTR
ES
FLA
SHIN
G B
Y B
UIL
DER
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
STU
D
TIM
BER
REV
EAL
STU
D
BR
ICK
WO
RK
JAM
B
35.0
101.
6
SOFFIT LINING
FLOORING
MORTAR
FLASHINGBY BUILDER
PACKING BY BUILDER
FIXINGS AT450mm CENTRES
FLASHING BY BUILDER
FRA
ME
SIZE
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 6
0mm
STUD
HEAD
TIMBER REVEAL
STUD
TIMBER REVEAL
HEADER
12mm CLEARANCE
NO PACKING
TIMBERARCHITRAVEBY BUILDER
OUTSIDE
10mm CLEARANCEBETWEEN SOFFIT LINING AND DOOR HEAD
QUAD BYBUILDER
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 4
0mm
FRA
ME
SIZE
FLASHINGBY BUILDER
BRICK SILL
SILL TILE
MORTAR
BRICKWORK
FIXING BY BUILDER
65.0
101.6
101.6
SUMPSILL
SILL
76.8
JAMB
35
101.6
PAC
KIN
G B
Y B
UIL
DER
FIXI
NG
S AT
450m
m C
ENTR
ES
FLA
SHIN
G B
Y B
UIL
DER
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
STU
D
TIM
BER
REV
EAL
STU
D
BR
ICK
WO
RK
JAM
B
35.0
101.
6
SOFFIT LINING
FLOORING
Building In Detail | Brick Veneer - 240mm wall Building In Detail | Brick Veneer - 240mm wall | Sump Sill
Bifold Door - Installation Bifold Door - Installation
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 40mmWidth = Frame Size + 60mm
• Secure aluminum door by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Sill bricks should be at least 10mm clear of door frame to allow settlement in brick veneer construction.
• Header beam should be at least 12mm clear of door frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of doors, sill must be fully supported.
• Build-in 3mm camber to head.• Bifolds top-hung - beam must support weight.• Ensure outside finish does not block sill drainage
holes.
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 40mmWidth = Frame Size + 60mm
• Secure aluminum door by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Sill bricks should be at least 10mm clear of door frame to allow settlement in brick veneer construction.
• Header beam should be at least 12mm clear of door frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of doors, sill must be fully supported.
• Build-in 3mm camber to head.• Bifolds top-hung - beam must support weight.• Ensure outside finish does not block sill drainage
holes.
170169Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
FLASHINGBY BUILDER
HEAD
TIMBER REVEAL
HEADER
12mm CLEARANCE
NO PACKING
TIMBERARCHITRAVEBY BUILDER
OUTSIDE
10mm CLEARANCEBETWEEN SOFFIT LINING AND DOOR HEAD
QUAD BYBUILDER
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 4
0mm
FRA
ME
SIZE
FLASHINGBY BUILDER
BRICK SILL
SILL TILEMORTAR
FIXING BY BUILDER
65.0
101.6
101.6
SILL
47.7
PAC
KIN
G B
Y B
UIL
DER
FIXI
NG
S AT
450m
m C
ENTR
ES
FLA
SHIN
G B
Y B
UIL
DER
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
STU
D
TIM
BER
REV
EAL
STU
D
BR
ICK
WO
RK
JAM
B
35.0
101.
6
SOFFIT LINING
FLOORING
FLASHINGBY BUILDER
HEAD
TIMBER REVEAL
HEADER
12mm CLEARANCE
NO PACKING
TIMBERARCHITRAVEBY BUILDER
OUTSIDE
10mm CLEARANCEBETWEEN SOFFIT LINING AND DOOR HEAD
QUAD BYBUILDER
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 4
0mm
FRA
ME
SIZE
FLASHINGBY BUILDER
BRICK SILL
SILL TILEMORTAR
FIXING BY BUILDER
65.0
101.6
101.6
SILL
SUMPSILL
76.8
PAC
KIN
G B
Y B
UIL
DER
FIXI
NG
S AT
450m
m C
ENTR
ES
FLA
SHIN
G B
Y B
UIL
DER
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
STU
D
TIM
BER
REV
EAL
STU
D
BR
ICK
WO
RK
JAM
B
35.0
101.
6
SOFFIT LINING
FLOORING
Building In Detail | Brick Veneer - 240mm wall | Rebated Building In Detail | Brick Veneer - 240mm wall | Rebated | Sump Sill
Bifold Door - Installation Bifold Door - Installation
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 40mmWidth = Frame Size + 60mm
• Secure aluminum door by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Sill bricks should be at least 10mm clear of door frame to allow settlement in brick veneer construction.
• Header beam should be at least 12mm clear of door frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of doors, sill must be fully supported.
• Build-in 3mm camber to head.• Bifolds top-hung - beam must support weight.• Ensure outside finish does not block sill drainage
holes.
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 40mmWidth = Frame Size + 60mm
• Secure aluminum door by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Sill bricks should be at least 10mm clear of door frame to allow settlement in brick veneer construction.
• Header beam should be at least 12mm clear of door frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of doors, sill must be fully supported.
• Build-in 3mm camber to head.• Bifolds top-hung - beam must support weight.• Ensure outside finish does not block sill drainage
holes.
172171Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
FLASHINGBY BUILDER
HEAD
TIMBER REVEAL
HEADER
12mm CLEARANCE
NO PACKING
TIMBERARCHITRAVEBY BUILDER
OUTSIDE
10mm CLEARANCEBETWEEN SOFFIT LINING AND DOOR HEAD
QUAD BYBUILDER
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 4
0mm
FRA
ME
SIZE
FLASHINGBY BUILDER
BRICK SILL
SILL TILE
MORTAR
FIXING BY BUILDER
65
101.6
101.6
SILL 47.7
PAC
KIN
G B
Y B
UIL
DER
FIXI
NG
S AT
450m
m C
ENTR
ES
FLA
SHIN
G B
Y B
UIL
DER
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
STU
D
TIM
BER
REV
EAL
STU
D
BR
ICK
WO
RK
JAM
B
35
101.
6
SOFFIT LINING
FLOORING
TIMBERJOIST
SILLSUPPORT
FLASHINGBY BUILDER
HEAD
TIMBER REVEAL
HEADER
12mm CLEARANCE
NO PACKING
TIMBERARCHITRAVEBY BUILDER
OUTSIDE
10mm CLEARANCEBETWEEN SOFFIT LINING AND DOOR HEAD
QUAD BYBUILDER
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 4
0mm
FRA
ME
SIZE
FLASHINGBY BUILDER
BRICK SILL
SILL TILE
MORTAR
FIXING BY BUILDER
65.0
101.6
101.6
SILL
76.8
PAC
KIN
G B
Y B
UIL
DER
FIXI
NG
S AT
450m
m C
ENTR
ES
FLA
SHIN
G B
Y B
UIL
DER
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
STU
D
TIM
BER
REV
EAL
STU
D
BR
ICK
WO
RK
JAM
B
35.0
101.
6
SOFFIT LINING
FLOORING
TIMBERJOIST
SILLSUPPORT
SUMPSILL
Building In Detail | Brick Veneer - 240mm wall | Joists Building In Detail | Brick Veneer - 240mm wall | Joists | Sump Sill
Bifold Door - Installation Bifold Door - Installation
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 40mmWidth = Frame Size + 60mm
• Secure aluminum door by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Sill bricks should be at least 10mm clear of door frame to allow settlement in brick veneer construction.
• Header beam should be at least 12mm clear of door frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of door, install sill support (refer to drawings below).
• Build-in 3mm camber to head.• Bifolds top-hung - beam must support weight.• Ensure outside finish does not block sill drainage
holes.
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 40mmWidth = Frame Size + 60mm
• Secure aluminum door by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Sill bricks should be at least 10mm clear of door frame to allow settlement in brick veneer construction.
• Header beam should be at least 12mm clear of door frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of door, install sill support (refer to drawings below).
• Build-in 3mm camber to head.• Bifolds top-hung - beam must support weight.• Ensure outside finish does not block sill drainage
holes.
174173Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
OUTSIDE
FRA
ME
SIZE
BR
ICK
OPE
NIN
G =
FR
AM
E SI
ZE +
3m
m
FLASHING BY BUILDER
BRICKWORK BRICKWORK
CAVITY FIXING BLOCK
CEMENT RENDER
STEEL LINTEL BY BUILDER
SILL TILE
MORTAR
FLASHING BY BUILDER
BRICK SILL
65.0
HEAD
101.6
FIXING BY BUILDER
76.8
101.6
SILL
SUMPSILL
FRAME SIZE
BRICK OPENING SIZE = FRAME SIZE + 3mm
JAM
B
FLA
SHIN
GB
Y B
UIL
DER
CEMENT RENDER
BR
ICK
WO
RK
BU
ILD
ING
IN L
UG
S AT
450m
m C
ENTR
ESB
RIC
KW
OR
K
101.
6
35.0
FLOORING
OUTSIDE
FRA
ME
SIZE
BR
ICK
OPE
NIN
G =
FR
AM
E SI
ZE +
3m
m
FLASHING BY BUILDER
BRICKWORK BRICKWORK
CAVITY FIXING BLOCK
CEMENT RENDER
STEEL LINTEL BY BUILDER
SILL TILE
MORTAR
FLASHING BY BUILDER
BRICK SILL
65.0HEAD
101.6
FIXING BY BUILDER
47.7
101.6
SILL
FRAME SIZE
BRICK OPENING = FRAME SIZE + 3mm
JAM
B
FLA
SHIN
GB
Y B
UIL
DER
CEMENT RENDERB
RIC
KW
OR
K
BU
ILD
ING
IN L
UG
S AT
450m
m C
ENTR
ESB
RIC
KW
OR
K
101.
6
35.0
FLOORING
Building In Detail | Double Brick - 280mm wall | Sump SillBuilding In Detail | Double Brick - 280mm wall
Bifold Door - InstallationBifold Door - Installation
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 3mmWidth = Frame Size + 3mm
• Secure aluminum door by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Header beam should be at least 12mm clear of window frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of doors, sill must be fully supported.
• Build-in 3mm camber to head.• Bifolds top-hung - beam must support weight.• Ensure outside finish does not block sill drainage
holes.
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 3mmWidth = Frame Size + 3mm
• Secure aluminum door by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Header beam should be at least 12mm clear of window frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of doors, sill must be fully supported.
• Build-in 3mm camber to head.• Bifolds top-hung - beam must support weight.• Ensure outside finish does not block sill drainage
holes.
176175Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
OUTSIDE
101.6
101.6
61.7
SUBSILL
FLOORING
SILL
BLOCKWORK(SEALED OR PRETREATED BY BUILDER
AS PER BLOCKWORK SUPPLIER’S SPECIFICTION - TO PREVENT WATER PENETRATION)
FIXING 450 CENTRES
PACKER
FIXING 450 CENTRES
FIXING 450 CENTRES
SEALANT
FRA
ME
SIZE
BLO
CK
WO
RK
OPE
NIN
G =
FR
AM
E H
EIG
HT
+ 40
mm
PACKER
SEALANT
35.0
101.
6
JAM
B
BLO
CK
WO
RK
(SEA
LED
OR
PR
ETR
EATE
D B
Y B
UIL
DER
AS
PER
BLO
CK
WO
RK
SU
PPLI
ER’S
SPE
CIF
ICTI
ON
- TO
PR
EVEN
T W
ATER
PEN
ETR
ATIO
N)
FRAME SIZE
BLOCKWORK OPENING = FRAME SIZE + 20mm
FIXI
NG
450
CEN
TRES
AN
GLE
TR
IM B
Y B
UIL
DER
FIXI
NG
450
CEN
TRES
REN
DER
BY
BU
ILD
ER
REN
DER
BY
BU
ILD
ER
HEAD
65.0
OUTSIDE
FRA
ME
SIZE
BR
ICK
OPE
NIN
G =
FR
AM
E SI
ZE +
3m
m
FLASHING BY BUILDER
BRICKWORK BRICKWORK
CAVITY FIXING BLOCK
CEMENT RENDER
STEEL LINTEL BY BUILDER
SILL TILE
MORTAR
FLASHING BY BUILDER
BRICK SILL
65.0
HEAD
101.6
FIXING BY BUILDER
47.7
101.6
SILL
FLOORING
FRAME SIZE
BRICK OPENING = FRAME SIZE + 3mm
JAM
B
FLA
SHIN
GB
Y B
UIL
DER
CEMENT RENDER
BR
ICK
WO
RK
BR
ICK
WO
RK
101.
6
35.0
BU
ILD
ING
IN L
UG
S
FIXI
NG
AT
450m
m C
ENTR
ES
Building In Detail | Blockwork
Bifold Door - InstallationBuilding In Detail | Double Brick - 280mm wall | Prepared Opening
Bifold Door - Installation
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Brick Opening:Height = Frame Size + 3mmWidth = Frame Size + 3mm
• Secure aluminum doors using building lug into mortor - fixing at 450mm max centres
• Sill bricks should be at least10 mm clear of window frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of doors, sill must be fully supported.
• Build-in 3mm camber to head.• Bifolds top-hung - beam must support weight.• Ensure outside finish does not block sill drainage
holes.
INSTALLING FRAME CORRECTLY
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Blockwork Opening:Height = Frame Height + 40mmWidth = Frame Size + 20mm
• Fit subframe to opening and seal fixings.• Fit window to subframe (screw or pop-rivet).• Do not permit weight of eaves or arch bars to bear
on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of doors, sill must be fully supported.
• Build-in 3mm camber to head.• Bifolds top-hung - beam must support weight.• Ensure outside finish does not block sill drainage
holes.
178177Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
OUTSIDE
NO PACKING
TIMBER REVEAL
HEADER
TIMBER ARCHITRAVE BY BUILDER
12mm CLEARANCE
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 4
0mm
FRA
ME
SIZE
DRESS SARKING INTO CLADDING "U" TRIM AT HEAD AS SHOWN
FIXING BY BUILDER
WALL CLADDING
FLASHING BY BUILDER
TRIM BY BUILDER
ALUMINIUM OR VINYLWALL CLADDING
FLASHING BY BUILDER
65.0HEAD
101.6
101.6
47.7SILL
CA
ULK
ING
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
FIXI
NG
S AT
450
mm
CEN
TRES
PAC
KIN
G B
Y B
UIL
DER
STU
D
TIM
BER
REV
EAL
STU
D
FLA
SHIN
G
BY
BU
ILD
ER
WALL CLADDING
35.0
101.
6
JAM
B
FLOORING
OUTSIDE
NO PACKING
TIMBER REVEAL
HEADER
TIMBER ARCHITRAVE BY BUILDER
12mm CLEARANCE
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 4
0mm
FRA
ME
SIZE
DRESS SARKING INTO CLADDING "U" TRIM AT HEAD AS SHOWN
FIXING BY BUILDER
WALL CLADDING
FLASHING BY BUILDER
TRIM BY BUILDER
ALUMINIUM OR VINYLWALL CLADDING
FLASHING BY BUILDER
65.0HEAD
101.6
101.6
76.8
SILL
SUMPSILL
FLOORING
CA
ULK
ING
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
FIXI
NG
S AT
450
mm
CEN
TRES
PAC
KIN
G B
Y B
UIL
DER
STU
D
TIM
BER
REV
EAL
STU
D
FLA
SHIN
G
BY
BU
ILD
ER
WALL CLADDING
35.0
101.
6
JAM
B
Building In Detail | Cladding on Studwall Building In Detail | Cladding on Studwall | Sump Sill
Bifold Door - InstallationBifold Door - Installation
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 40mmWidth = Frame Size + 60mm
• Secure aluminum door by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Header beam should be at least 12mm clear of window frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of doors, install sill support (refer to drawings below).
• Build-in 3mm camber to head.• Bifolds top-hung - beam must support weight.• Ensure outside finish does not block sill drainage
holes.
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 40mmWidth = Frame Size + 60mm
• Secure aluminum door by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Header beam should be at least 12mm clear of window frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of doors install sill support (refer to drawings below).
• Build-in 3mm camber to head.• Bifolds top-hung - beam must support weight.• Ensure outside finish does not block sill drainage
holes.
180179Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
RENDERBY BUILDER
FLASHINGBY BUILDER
RENDERBY BUILDER
FLOORING
HEBEL POWER PANEL
SILL
FRA
ME
SIZE
OUTSIDE
NO PACKING12mm CLEARANCE
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 4
0mm
10mm CLEARANCEBETWEEN SOFFIT LINING AND WINDOW HEAD
QUAD BYBUILDER
SOFFIT LINING
TIMBER ARCHITRAVEBY BUILDER
TIMBER REVEAL
FLASHINGBY BUILDER
HEADER
101.6
101.6
47.7
HEAD
HEB
EL P
OW
ER P
AN
EL
FLA
SHIN
G B
Y B
UIL
DER
STU
D
STU
D
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
PAC
KIN
GB
Y B
UIL
DER
FIXI
NG
S AT
450m
m C
ENTR
ES
TIM
BER
REV
EAL
JAM
B
35.0
65.0
FIXINGS AT450mm CENTRES
RENDERBY BUILDER
RENDERBY BUILDER
FLOORING
HEBEL POWER PANEL
SILL
SUMPSILL
FRA
ME
SIZE
OUTSIDE
NO PACKING12mm CLEARANCE
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 4
0mm
10mm CLEARANCEBETWEEN SOFFIT LINING AND WINDOW HEAD
QUAD BYBUILDER
SOFFIT LINING
TIMBERARCHITRAVEBY BUILDER
TIMBER REVEAL
FLASHINGBY BUILDER
HEADER
101.6
76.8
HEAD
HEB
EL P
OW
ER P
AN
EL
FLA
SHIN
G B
Y B
UIL
DER
STU
D
STU
D
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
PAC
KIN
GB
Y B
UIL
DER
FIXI
NG
S AT
450m
m C
ENTR
ES
TIM
BER
REV
EAL
JAM
B
35.0
65.0
FLASHINGBY BUILDER
FIXINGS AT450mm CENTRES
Building In Detail | Hebel Power Panel Building In Detail | Hebel Power Panel | Sump Sill
Bifold Door - InstallationBifold Door - Installation
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 40mmWidth = Frame Size + 60mm
• Secure aluminum door by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Header beam should be at least 12mm clear of window frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of doors, sill must be fully supported.
• Caulking between render and frame• Build-in 3mm camber to head.• Bifolds top-hung - beam must support weight.• Ensure outside finish does not block sill drainage
holes.
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 40mmWidth = Frame Size + 60mm
• Secure aluminum door by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Header beam should be at least 12mm clear of window frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of doors, sill must be fully supported.
• Caulking between render and frame• Build-in 3mm camber to head.• Bifolds top-hung - beam must support weight.• Ensure outside finish does not block sill drainage
holes.
181 182
Quantum® Bifold Door
Cross Sectional Views
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend®
Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
184183Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
Two Panel | ThermashieldTwo Panel
73.0 73.073.0 73.089.1 89.189.1 89.1
35.0
35.0
37.0125.8
125.835.0
16.0
16.0
16.0
16.010
0.0
100.
0
30.0
30.0
60.0
60.0
18.0
65.0
65.0
90.0
90.0
47.7
47.7
88.9
88.9
13.5
48.0
48.0
101.6
101.6
32.5
32.5
25.0
26.5
outside outsideoutside outside
Bifold Door - Cross Sectional ViewsBifold Door - Cross Sectional Views
186185Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
Two Panel | Heavy Duty | Elevation
73.0 73.0
35.0
28.6 28.6
35.0
125.816.0
16.011
5.0
30.0
65.0105.0
88.985
.047.7
48.0
101.6
42.5
outsideoutside
Bifold Door - Cross Sectional ViewsTwo Panel | Heavy Duty | Plan
Bifold Door - Cross Sectional Views
187 188
Quantum® Hinge Door
Features & Benefits
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend®
Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
190189Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
SECURITY
• Infinity night latch key lock hardware supplied as standard.• Mortice lock mechanism pulls the door panels in tight in the center,
top and bottom locking the doors securely.• Optional security, barrier and Prowler Proof screens available.
FRAME
• Robust 102mm semi commercial aluminium door frame.
PANEL
• Durable hinged panels.• Individual panels can measure up to 2400mm high
(2700mm high in heavy duty panels) and up to 920 wide (1000mm wide in heavy duty panels).
• Single or paired french doors available.• Sash punched holes are fitted with infill caps.• Open-in and Open-out option available.
SILL
• Sill has built-in sump sill and no insect traps for easy maintenance and cleaning.
GLAZING & ENERGY EFFICIENCY
• All Trend® Windows and Doors comply with Australian Standards AS1288.
• Glazing options from 4mm single glazed to 18mm insulated glazed units (IGUs).
• Available in a range of glazing styles.• Energy efficiency options available to help reduce
home energy consumption.• All glazing options are Window Energy Rating Scheme
(WERS) rated - providing a wide range of energy efficient solutions.
ACOUSTICS
• Acoustic solutions available for improved noise reduction.
• High Rw ratings ava ilable.
WIND & WATER RATINGS
• All Trend® Windows and Doors are designed to meet and surpass 700Pa wind velocity rating and 150Pa water penetration rating and comply with Australian Standards AS2047.
• Pascal deflection rates up to 2200Pa.• HInge door rated at an air infiltration of 1.00L/s m2.
Hinge Door - Features & BenefitsHinge Door - Features & Benefits
BUSHFIRE
HARDWARE
• Infinity Satin Chrome hardware supplied as standard• Infinity hinge door lock include night latch feature - locking
doors when handle is in vertical position.• Four point locking to improve sealing supplied as standard.• Optional colours available are:
- Pearl White- Stone Beige- Anodic Natural Matt- Gloss Black
• Door locks can be keyed alike to other Quantum® products for ease of use.
• Hinges made out of durable stainless steel - optional black colour is also available.
• Parliament hinges available where door needs to be flush to the brickwork.
• Adjustable lift off hinge supplied as standard allows the door to be adjusted bertically and horizontally by up to 3mm.
OPTIONS
• Glazing options also available in bar layout styles:- Colonial- Federation - Ovolo glazing bar style*
• Wide range of powder coating colours.• Customised WERS ratings.• Variety of sizes and custom made options available.• Variety of configuration options available.
*Ovoloavailableinsingleglazingonly.
DELIVERY
• Protective wrapping for delivery to site comes standard for all Quantum® products.
• Xtreme® Bushfire Protection option available*.
• Xtreme® options have been tested by CSIRO to meet BAL-40 - compliant to AS1530.8.1 within Australian Standards AS3959-2009.
191 192
Quantum® Hinge Door
Installation
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend®
Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
194193Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
FLASHINGBY BUILDER
HEAD
TIMBER REVEAL
HEADER
12mm CLEARANCE
NO PACKING
TIMBERARCHITRAVEBY BUILDER
OUTSIDE
10mm CLEARANCEBETWEEN SOFFIT LINING AND DOOR HEAD
QUAD BYBUILDER
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 4
0mm
FRA
ME
SIZE
FLASHINGBY BUILDER
BRICK SILL
SILL TILE
MORTAR
25.6
101.6
101.6
SILL
31.6
SOFFIT LINING
FLOORING
PAC
KIN
G B
Y B
UIL
DER
FIXI
NG
S AT
450m
m C
ENTR
ES
FLA
SHIN
G B
Y B
UIL
DER
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
STU
D
TIM
BER
REV
EAL
STU
D
BR
ICK
WO
RK
JAM
B
25.0
101.
6
FLASHINGBY BUILDER
HEAD
TIMBER REVEAL
HEADER
12mm CLEARANCE
NO PACKING
TIMBERARCHITRAVEBY BUILDER
OUTSIDE
10mm CLEARANCEBETWEEN SOFFIT LINING AND DOOR HEAD
QUAD BYBUILDER
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 4
0mm
FRA
ME
SIZE
FLASHINGBY BUILDER
BRICK SILL
SILL TILE
MORTAR
25.6
101.6
101.6
SUMPSILL
SILL
60.7
SOFFIT LINING
FLOORING
PAC
KIN
G B
Y B
UIL
DER
FIXI
NG
S AT
450m
m C
ENTR
ES
FLA
SHIN
G B
Y B
UIL
DER
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
STU
D
TIM
BER
REV
EAL
STU
D
BR
ICK
WO
RK
JAM
B
25.0
101.
6
Building In Detail | Brick Veneer - 240mm wall Building In Detail | Brick Veneer - 240mm wall | Sump Sill
Hinge Door - Installation Hinge Door - Installation
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 40mmWidth = Frame Size + 60mm
• Secure aluminum door by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Sill bricks should be at least 10mm clear of door frame to allow settlement in brick veneer construction.
• Header beam should be at least 12mm clear of door frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of doors, sill must be fully supported.
• Ensure outside finish does not block sill drainage holes.
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 40mmWidth = Frame Size + 60mm
• Secure aluminum door by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Sill bricks should be at least 10mm clear of door frame to allow settlement in brick veneer construction.
• Header beam should be at least 12mm clear of door frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of doors, sill must be fully supported.
• Ensure outside finish does not block sill drainage holes.
196195Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
FLASHINGBY BUILDER
HEAD
TIMBER REVEAL
HEADER
12mm CLEARANCE
NO PACKING
TIMBERARCHITRAVEBY BUILDER
OUTSIDE
10mm CLEARANCEBETWEEN SOFFIT LINING AND DOOR HEAD
QUAD BYBUILDER
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 4
0mm
FRA
ME
SIZE
FLASHINGBY BUILDER
BRICK SILL
SILL TILE
MORTAR
25.6
101.6
101.6
SILL
31.6
SOFFIT LINING
FLOORING
PAC
KIN
G B
Y B
UIL
DER
FIXI
NG
S AT
450m
m C
ENTR
ES
FLA
SHIN
G B
Y B
UIL
DER
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
STU
D
TIM
BER
REV
EAL
STU
D
BR
ICK
WO
RK
JAM
B
25.0
101.
6
FLASHINGBY BUILDER
HEAD
TIMBER REVEAL
HEADER
12mm CLEARANCE
NO PACKING
TIMBERARCHITRAVEBY BUILDER
OUTSIDE
10mm CLEARANCEBETWEEN SOFFIT LINING AND DOOR HEAD
QUAD BYBUILDER
STU
D O
PEN
ING
= F
RA
ME
SIZE
+40
mm
FRA
ME
SIZE
FLASHINGBY BUILDER
BRICK SILL
SILL TILE
MORTAR
25.6
101.6
101.6
SUMPSILL
SILL
60.7
SOFFIT LINING
FLOORING
PAC
KIN
G B
Y B
UIL
DER
FIXI
NG
S AT
450m
m C
ENTR
ES
FLA
SHIN
G B
Y B
UIL
DER
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
STU
D
TIM
BER
REV
EAL
STU
D
BR
ICK
WO
RK
JAM
B
25.0
101.
6
Building In Detail | Brick Veneer - 240mm wall | Rebated Building In Detail | Brick Veneer - 240mm wall | Rebated | Sump Sill
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 40mmWidth = Frame Size + 60mm
• Secure aluminum door by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Sill bricks should be at least 10mm clear of door frame to allow settlement in brick veneer construction.
• Header beam should be at least 12mm clear of door frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of doors, sill must be fully supported.
• Ensure outside finish does not block sill drainage holes.
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 40mmWidth = Frame Size + 60mm
• Secure aluminum door by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Sill bricks should be at least 10mm clear of door frame to allow settlement in brick veneer construction.
• Header beam should be at least 12mm clear of door frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of doors, sill must be fully supported.
• Ensure outside finish does not block sill drainage holes.
Hinge Door - Installation Hinge Door - Installation
198197Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
FLASHINGBY BUILDER
HEAD
TIMBER REVEAL
HEADER
12mm CLEARANCE
NO PACKING
TIMBERARCHITRAVEBY BUILDER
OUTSIDE
10mm CLEARANCEBETWEEN SOFFIT LINING AND DOOR HEAD
QUAD BYBUILDER
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 4
0mm
FRA
ME
SIZE
FLASHINGBY BUILDER
BRICK SILL
SILL TILE
MORTAR
25.6
101.6
101.6
SILL
31.6
SOFFIT LINING
FLOORING
TIMBERJOIST
SILLSUPPORT
PAC
KIN
G B
Y B
UIL
DER
FIXI
NG
S AT
450m
m C
ENTR
ES
FLA
SHIN
G B
Y B
UIL
DER
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
STU
D
TIM
BER
REV
EAL
STU
D
BR
ICK
WO
RK
JAM
B
25.0
101.
6
FLASHINGBY BUILDER
HEAD
TIMBER REVEAL
HEADER
12mm CLEARANCE
NO PACKING
TIMBERARCHITRAVEBY BUILDER
OUTSIDE
10mm CLEARANCEBETWEEN SOFFIT LINING AND DOOR HEAD
QUAD BYBUILDER
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 4
0mm
FRA
ME
SIZE
FLASHINGBY BUILDER
BRICK SILL
SILL TILE
MORTAR
25.6
101.6
101.6
SILL
60.7
SOFFIT LINING
FLOORING
TIMBERJOIST
SILLSUPPORT
SUMPSILL
PAC
KIN
G B
Y B
UIL
DER
FIXI
NG
S AT
450m
m C
ENTR
ES
FLA
SHIN
G B
Y B
UIL
DER
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
STU
D
TIM
BER
REV
EAL
STU
D
BR
ICK
WO
RK
JAM
B
25.0
101.
6
Building In Detail | Brick Veneer - 240mm wall | Joists Building In Detail | Brick Veneer - 240mm wall | Joists | Sump Sill
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 40mmWidth = Frame Size + 60mm
• Secure aluminum door by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Sill bricks should be at least 10mm clear of door frame to allow settlement in brick veneer construction.
• Header beam should be at least 12mm clear of door frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of doors, sill must be fully supported.
• Ensure outside finish does not block sill drainage holes.
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 40mmWidth = Frame Size + 60mm
• Secure aluminum door by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Sill bricks should be at least 10mm clear of door frame to allow settlement in brick veneer construction.
• Header beam should be at least 12mm clear of door frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of doors, sill must be fully supported.
• Ensure outside finish does not block sill drainage holes.
Hinge Door - Installation Hinge Door - Installation
200199Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
OUTSIDE
FRA
ME
SIZE
BR
ICK
OPE
NIN
G =
FR
AM
E SI
ZE +
3mm
FLASHING BY BUILDER
BRICKWORK BRICKWORK
CAVITY FIXING BLOCK
CEMENT RENDER
STEEL LINTEL BY BUILDER
SILL TILE
MORTAR
FLASHING BY BUILDER
BRICK SILL
25.1
HEAD
101.6
60.7
101.6
SILL
SUMPSILL
FLOORING
FRAME SIZE
BRICK OPENING = FRAME SIZE + 3mm
JAM
B
FLA
SHIN
GB
Y B
UIL
DER
CEMENT RENDER
BR
ICK
WO
RK
BU
ILD
ING
IN L
UG
S AT
450m
m C
ENTR
ESB
RIC
KW
OR
K
101.
6
25.0
OUTSIDE
FRA
ME
SIZE
BR
ICK
OPE
NIN
G =
FR
AM
E SI
ZE +
3m
m
FLASHING BY BUILDER
BRICKWORK
CAVITY FIXING BLOCK
CEMENT RENDER
STEEL LINTEL BY BUILDER
SILL TILE
MORTAR
FLASHING BY BUILDER
BRICK SILL
25.6
HEAD
101.6
31.6
101.6
SILL FLOORING
FRAME SIZE
BRICK OPENING = FRAME SIZE + 3mm
JAM
B
FLA
SHIN
GB
Y B
UIL
DER
CEMENT RENDER
BR
ICK
WO
RK
BU
ILD
ING
IN L
UG
S AT
450m
m C
ENTR
ESB
RIC
KW
OR
K
101.
6
25.0
Building In Detail | Double Brick - 280mm wall | Sump SillBuilding In Detail | Double Brick - 280mm wall
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 3mmWidth = Frame Size + 3mm
• Secure aluminum door by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Header beam should be at least 12mm clear of window frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of doors, sill must be fully supported.
• Ensure outside finish does not block sill drainage holes.
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 3mmWidth = Frame Size + 3mm
• Secure aluminum door by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Header beam should be at least 12mm clear of window frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of doors, sill must be fully supported.
• Ensure outside finish does not block sill drainage holes.
Hinge Door - Installation Hinge Door - Installation
202201Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
OUTSIDE
101.6
101.6
45.6
30.0
SUBSILL
FLASHING BY BUILDER
FLOORING
SILL
HEAD
SUBHEAD
BLOCKWORK(SEALED OR PRETREATED BY BUILDER
AS PER BLOCKWORK SUPPLIER’S SPECIFICTION - TO PREVENT WATER PENETRATION)
FIXING 450 CENTRES
PACKERSEALANT
FIXING 450 CENTRES
FIXING 450 CENTRES
SEALANT
FRA
ME
SIZE
BLO
CK
WO
RK
OPE
NIN
G =
FR
AM
E H
EIG
HT
+ 80
mm
PACKER
SEALANT
FIXING 450 CENTRES25.0
101.
6
JAM
B
BLO
CK
WO
RK
(SEA
LED
OR
PR
ETR
EATE
D B
Y B
UIL
DER
AS
PER
BLO
CK
WO
RK
SU
PPLI
ER’S
SPE
CIF
ICTI
ON
- TO
PR
EVEN
T W
ATER
PEN
ETR
ATIO
N)
FRAME SIZE
BLOCKWORK OPENING = FRAME SIZE + 20mm
FIXI
NG
450
CEN
TRES
AN
GLE
TR
IM B
Y B
UIL
DER
FIXI
NG
450
CEN
TRES
REN
DER
BY
BU
ILD
ER
REN
DER
BY
BU
ILD
ER
OUTSIDE
FRA
ME
SIZE
BR
ICK
OPE
NIN
G =
FR
AM
E SI
ZE +
3m
m
FLASHING BY BUILDER
BRICKWORK BRICKWORK
CAVITY FIXING BLOCK
CEMENT RENDER
STEEL LINTEL BY BUILDER
SILL TILE
MORTAR
FLASHING BY BUILDER
BRICK SILL
25.6
HEAD
101.6
31.6
101.6
SILL FLOORING
FRAME SIZE
BRICK OPENING = FRAME SIZE + 3mm
JAM
B FLA
SHIN
GB
Y B
UIL
DER
CEMENT RENDER
BR
ICK
WO
RK
BR
ICK
WO
RK
101.
6
25.0
BU
ILD
ING
IN L
UG
S
Building In Detail | BlockworkBuilding In Detail | Double Brick - 280mm wall | Prepared Opening
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Brick Opening:Height = Frame Size + 3mmWidth = Frame Size + 3mm
• Secure aluminum doors using building lug into mortor - fixing at 450mm max centres
• Sill bricks should be at least10 mm clear of window frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of doors, sill must be fully supported.
• Ensure outside finish does not block sill drainage holes.
INSTALLING FRAME CORRECTLY
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Blockwork Opening:Height = Frame Size + 80mmWidth = Frame Size + 20mm
• Fit subframe to opening and seal fixings.• Fit window to subframe (screw or pop-rivet).• Do not permit weight of eaves or arch bars to bear
on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of doors, sill must be fully supported.
• Ensure outside finish does not block sill drainage holes.
Hinge Door - Installation Hinge Door - Installation
204203Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
OUTSIDE
NO PACKING
TIMBER REVEAL
HEADER
TIMBERARCHITRAVEBY BUILDER
12mm CLEARANCE
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 4
0mm
FRA
ME
SIZE
DRESS SARKING INTO CLADDING "U" TRIM AT HEAD AS SHOWN
FIXING BY BUILDER
WALL CLADDING
FLASHING BY BUILDER
TRIM BY BUILDER
ALUMINIUM OR VINYLWALL CLADDING
FLASHING BY BUILDER
25.6
HEAD
101.6
101.6
31.6
SILL
CA
ULK
ING
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
FIXI
NG
S AT
450
mm
CEN
TRES
PAC
KIN
G B
Y B
UIL
DER
STU
D
TIM
BER
REV
EAL
STU
D
FLA
SHIN
G
BY
BU
ILD
ER
WALL CLADDING
25.0
101.
6
JAM
B
FLOORING
OUTSIDE
NO PACKING
TIMBER REVEAL
HEADER
TIMBERARCHITRAVEBY BUILDER
12mm CLEARANCE
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 4
0mm
FRA
ME
SIZE
DRESS SARKING INTO CLADDING "U" TRIM AT HEAD AS SHOWN
FIXING BY BUILDER
WALL CLADDING
FLASHING BY BUILDER
TRIM BY BUILDER
ALUMINIUM OR VINYLWALL CLADDING
FLASHING BY BUILDER
25.6
HEAD
101.6
101.6
60.7
SILL
SUMPSILL
FLOORING
CA
ULK
ING
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
FIXI
NG
S AT
450
mm
CEN
TRES
PAC
KIN
G B
Y B
UIL
DER
STU
D
TIM
BER
REV
EAL
STU
D
FLA
SHIN
G
BY
BU
ILD
ER
WALL CLADDING
25.0
101.
6
JAM
B
Building In Detail | Cladding on Studwall Building In Detail | Cladding on Studwall | Sump Sill
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 40mmWidth = Frame Size + 60mm
• Secure aluminum door by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Header beam should be at least 12mm clear of window frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of doors, install sill support (refer to drawings below).
• Ensure outside finish does not block sill drainage holes.
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 40mmWidth = Frame Size + 60mm
• Secure aluminum door by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Header beam should be at least 12mm clear of window frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of doors install sill support (refer to drawings below).
• Ensure outside finish does not block sill drainage holes.
Hinge Door - Installation Hinge Door - Installation
206205Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
RENDERBY BUILDER
FLOORING
HEBEL POWER PANEL
SILL
FRA
ME
SIZE
OUTSIDE
NO PACKING12mm CLEARANCE
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 4
0mm
10mm CLEARANCEBETWEEN SOFFIT LINING AND WINDOW HEAD
QUAD BYBUILDER
SOFFIT LINING
TIMBERARCHITRAVEBY BUILDER
TIMBER REVEAL
FLASHINGBY BUILDER
HEADER
101.6
101.6
31.6
HEAD
25.1
FLASHINGBY BUILDER
RENDERBY BUILDER
HEB
EL P
OW
ER P
AN
EL
FLA
SHIN
G B
Y B
UIL
DER
STU
D
STU
D
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
PAC
KIN
GB
Y B
UIL
DER
FIXI
NG
S AT
450m
m C
ENTR
ES
TIM
BER
REV
EAL
JAM
B
25.0
RENDERBY BUILDER
FLOORING
HEBEL POWER PANEL
SILL
SUMPSILL
FRA
ME
SIZE
OUTSIDE
NO PACKING12mm CLEARANCE
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 4
0mm
10mm CLEARANCEBETWEEN SOFFIT LINING AND WINDOW HEAD
QUAD BYBUILDER
SOFFIT LINING
TIMBERARCHITRAVEBY BUILDER
TIMBER REVEAL
FLASHINGBY BUILDER
HEADER
101.6
60.7
HEAD
25.1
FLASHINGBY BUILDER
RENDERBY BUILDER
HEB
EL P
OW
ER P
AN
EL
FLA
SHIN
G B
Y B
UIL
DER
STU
D
STU
D
FRAME SIZE
STUD OPENING = FRAME SIZE + 60mm
PAC
KIN
GB
Y B
UIL
DER
FIXI
NG
S AT
450m
m C
ENTR
ES
TIM
BER
REV
EAL
JAM
B
25.0
Building In Detail | Hebel Power Panel Building In Detail | Hebel Power Panel | Sump Sill
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 40mmWidth = Frame Size + 60mm
• Secure aluminum door by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Header beam should be at least 12mm clear of window frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of doors, sill must be fully supported.
• Ensure outside finish does not block sill drainage holes.
INSTALLING FRAME CORRECTLY
• Fit flashing to door surround (refer to drawing below).
• Measure the frame opening to ensure that there is sufficient room for the product and additional packing.
Stud Opening:Height = Frame Size + 40mmWidth = Frame Size + 60mm
• Secure aluminum door by nailing through reveal into studwork - fixing at 450mm maximum centres.
• Header beam should be at least 12mm clear of window frame.
• Do not permit weight of eaves or arch bars to bear on any window or door frame. (Windows and doors are not load bearing.)
• To ensure the satisfactory long term performance of doors, sill must be fully supported.
• Ensure outside finish does not block sill drainage holes.
Hinge Door - Installation Hinge Door - Installation
207 208
Quantum® Hinge DoorCross Sectional Views
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend®
Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
210209Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
Single | Open OutSingle | Open In
73.0 73.073.0 73.028.6 28.628.6 28.621.521.5
63.0
63.0
60.0
60.0
25.0
25.0
45.6
45.6
100.0
100.
0
25.0
25.0
31.6
31.6
32.5 32.5
outside outsideoutside outside
Hinge Door - Cross Sectional View Hinge Door - Cross Sectional View
212211Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
Pair | Open In
73.0
79.0
28.621.5
129.025.0
outside
Hinge Door - Cross Sectional ViewSingle | Double Glazed
Hinge Door - Cross Sectional View
73.0 73.028.6 28.6
63.0
60.0
25.0
45.6
100.
0
25.0
31.6
32.5
outside outside
214213Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
Hinge Door - Cross Sectional ViewSingle | Heavy Duty | Open Out | PlanSingle | Heavy Duty | Open Out | Elevation
73.0 73.0
25.0
28.6 28.6
65.0
115.
065.0
25.0
45.0
outside outside
Hinge Door - Cross Sectional View
44.1
31.6
216215Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
Cross Sectional Views | Single | Ovolo
Hinge Door
73.0 73.028.6 28.6
63.0
60.0
25.0
45.6
100.
0
25.0
31.6
12.5
20.3
outside outside
Cross Sectional View
45.0
73.028.6
137.0
25.0
outside
Pair | Heavy Duty | Open Out
217 218
Quantum®
Care & Maintenance
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend®
Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
220219Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014
ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend®
Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Trend® Windows & Doors | Design Manual | Q-Mk-1 | May 2014ConfidentialityNotice:ThisdocumentandtheinformationitcontainsarecopyrightandconfidentialtoTrend® Windows&DoorsPtyLimited.Disclosure,useandcopyinginanyformwhatsoever,exceptasauthorisedbyTrend® Windows&Doorsinwriting,arestrictlyprohibited.PatentsandDesignRegistrationspending
Please note that drawings displayed are not to scalePlease note that drawings displayed are not to scale
Care & Maintenance
STORAGE
Onsite,windowsanddoorsshouldbestoredinacleandryfreeareafromcement,lime,paint,acidetc.Duringandafterinstallationwindows
anddoorsmustbeprotectedfrombuilding,materialsandloosedebrissuchaswetplaster,mortar,paintandweldingsplatter.Wetplasterand
mortarshouldberemovedimmediatelyandsoiledareaswasheddownwithaspongeandcleanwaterandaspongeorrag,
toavoidpermanentstainingorscratchingoffinishedsurfaces.
DEBRIS REMOVAL
Ifremovalofdebrisisdelayedandscrapingbecomesnecessarythesurfacefinishmaybedamaged.Removecement,mortarandother
droppingsimmediately,usingamplecleanwaterandaspongeorragtoavoidpermanentstainingoffinishedsurfaces.
Care & Maintenance
MAINTENANCE CONDITIONS
1. Allpowdercoatedsurfacesshouldbecleanedusingasoftclothorspongewithasolutionofwarmwater.
Inindustrialenvironmentsorenvironmentswithatmosphericpollutionthenormalfrequencyofcleaningshouldbeatnotmorethanthree
(3)monthlyintervals.However,wherethereishighatmosphericpollution,suchasamarine/coastalenvironment,cleaningshouldbe
conductedatmonthlyintervals.
Wheretheatmosphereisdeemedtobenon-hazardousegrural,theperiodbetweencleaningfrequencycanbeextendeduptotwelve
(12)months.
2. Removecementmortardroppingfromwindowsimmediately,takingcaretoavoidscratchingglassandframesaspermanentdamagecan
result.Trend®Windows&Doorswillnotbeliableforanydamagethatmayoccurifthetimberoraluminiumpaintedsurfacescomeinto
contactwithacidwhencleaningbrickwork.
3. TimberproductsMUSTBEsealed(withinone(1)monthofdelivery)withtwocoatsofpaint,varnishorsealertobothfacesandedges
includingtopandbottom.Exteriorqualityfinishesinlightreflectivecolours(notDARKcolours)mustbeappliedtoallproductsexposedto
direct sunlight or the elements.
ON-SITE PROTECTION
Doortracksandwindowsillsshouldbeprotectedfromplanks,scaffoldingandbarrows.
ON-SITE CLEANING
Acidusedforcleaningbrickworkmustbepreventedfrommakingcontactwithpowdercoated
aluminiumwindowanddoorsurfaces.Ifanyacidorsimilarcorrosivematerialdoescomeinto
contactwithwindowordoorsurfacesthoseareasmustbewashedimmediatelywithlarge
quantitiesofcleanwater.
Ifusingahoseorsimilarapparatustocleanwindowsand/ordoorsensurethehosenozzle/jet
fittingissettoafinesprayasshowninthediagram.Atnotimeshouldawindowordoorbe
hitwithfullforceofahosenozzle/jetsetting.
Ifstripablecoatingsorpressuresensitivetapesareusedtoprotectexposedsurfaces,care
mustbetakennottodamagethefinishduringtheirremoval.Prolongedexposuretosunlight
canmakethemincreasinglydifficulttoremove.
contact
NEW SOUTH WALES
GIRRAWEEN NationalHeadOffice
44-52 Mandoon Road Girraween, NSW 2145 Tel: (02) 9840 2000 Fax: (02) 9840 2100
CHATSWOOD
3/384 Eastern Valley Way Chatswood, NSW 2067 Tel: (02) 9882 1155 Fax: (02) 9882 1566
DUBBO
1/55 Douglas Mawson Drive Dubbo, NSW 2830 Tel: (02) 6884 4055 Fax: (02) 6884 4057
NEWCASTLE
56-60 Munibung Road Cardiff, NSW 2285 Tel: (02) 4956 7139 Fax: (02) 4956 9146
NOWRA
Unit 1A,175 Princes Highway South Nowra, NSW 2541 Tel: (02) 4423 1500 Fax: (02) 4423 5100
OURIMBAH (Fountaindale)
5 Catamaran Road Ourimbah, NSW 2258 Tel: (02) 4389 1402 Fax: (02) 4389 8460
PORT MACQUARIE
35 Jindalee Road Port Macquarie, NSW 2444 Tel: (02) 6581 5100 Fax: (02) 6581 4056
TAMWORTH
7-11 Hume Street Tamworth, NSW 2340 Tel: (02) 6765 4066 Fax: (02) 6765 2584 WOLLONGONG
Tel: (02) 4256 1966 Fax: (02) 4256 3863
ACT
74 Sheppard Street Hume, ACT 2620 Tel: (02) 6260 1266 Fax: (02) 6260 1381
TASMANIA
GP Glass 26 Loone Lane Spreyton, TAS 7310 Tel: (03) 6427 3166 Fax: (03) 6427 3161
VICTORIA
BAYSWATERVictorianHeadOffice
92 Canterbury Road Bayswater North, VIC 3153 Tel: (03) 9751 7000 Fax: (03) 9751 7010
HAWTHORN
192 Burwood Road Hawthorn, VIC 3122 Tel: (03) 9214 4000 Fax: (03) 9214 4040
SEAFORD
Seaford, VIC 3198 Tel: (03) 9770 8888 Fax: (03) 9775 1811
BALLARAT
72-74 Main Road Ballarat, VIC 3350 Tel: (03) 5338 7837 Fax: (03) 5331 3335
Geelong, VIC 3220 Mob: 0418 522 515 Fax: (03) 5261 4234
SOUTH AUSTRALIA
15-17 Indama Street Regency Park, SA 5010 Tel: (08) 8347 0866 Fax: (08) 8347 0522
QUEENSLAND
ORMEAUQueenslandHeadOffice
134 Lahrs Road Ormeau, QLD 4208 Tel: (07) 5549 4100 Fax: (03) 5549 4111
COORPAROO
189 Cavendish Road Coorparoo, QLD 4151 Tel: (07) 3394 2897 Fax: (07) 3397 0119 CABOOLTURE
27-43 Skyreach Street Caboolture, QLD 4510 Tel: (07) 5428 9200 Fax: (07) 5428 9222
HERVEY BAY
6 Miller Street Urangan, QLD 4655 Tel: (07) 4125 3188 Fax: (07) 4125 2188
PRODUCTS NOT AVAILABLE
IN WESTERN AUSTRALIA
Trend® National Customer Assistance Centre
(between 8:30am - 4:30pm EST, Mon-Fri)
13 72 74www.trendwindows.com.au
Trend® Windows & Doors Pty Limited, ABN 96 000 433 492. TM denotes a trademark and ® denotes a registered trademark
owned by Trend® Windows & Doors Pty Limited. © Owned by Trend® Windows & Doors Pty Limited. TREND187_MAY2014