Quality Products Comprehensive Training Outstanding ...Bracket for DIY Pallets Pallet arm not included. Pallet Arms: V-2000: V2-ARM V-1000: V1-ARM With 2.5” x 1.5” rotor arms

Quality Products Comprehensive Training Outstanding Service & Support

Product Catalog edition - 131aScreen printing equipmentMade in the USA since 1960

Options• Additional color and station

upgrade packages• Fast, numbering system attachment• Super heavy duty print arms• Wide variety of pallets and

attachments available• Side clamps, removable or fixed • Heavy duty drop-down wheels• Service pan with locking wheels

25 YEAR

WARRANT

Y*

VC-ARM-HD100% wrench free

adjustments

V2HD-66 6 station, 6 color, rotary pressw/ Standard size 15" x 17" (38 x 43 cm) steel pallets

V-2000HD featuresRELIABLE

HEAVY DUTY

USER FRIENDLYADJUSTABLE

PRECISEACCURATE

FLEXIBLESMART

STRONG

DURABLEINNOVATIVEEXCLUSIVE

CONVENIENTEXPANDABLE

25 Year WarrantyNever warp steel pallets with rubber tops and corner clamp pallet arm100% wrench free adjustments6 way screen levelingHolds accurate multicolor printing registration Embedded registration bearings (close to the screen, stays clear of spray tack) Prints all heads down Gas lifters with 16 position variable lift strength12" (30 cm) wide steel rear screen clamps joined by a steel clamp bar for off center clamping & 2.75" (6.9 cm) precision ground center shaft3.25" (8.3 cm) square steel rotor arm with ruler indicatorElevated Pallets—no need to stretch shirts over the arm (also compatible with quick stretch jacket attachment) Zero backlash bearings on screen arm pivotAdjustable micro clamp leversUpgrade at any time from 1 station 1 color tabletop to 10 station 10 color rotary floor press!

Tabletop models available.

*25 year limited warranty. Gas springs and rubber pallet tops covered for 3 years.

INDUSTRIAL MANUAL SCREEN PRINTERSV-2000HD

V2000HD

_0415

V-2000HD MODEL GALLERY

V2hd-888 Station/8 Color





V2hd-11-t1 Station/1 ColorTabletop Press

V2hd-14-t1 Station/4 ColorTabletop Press

V2hd-fp-111 Station/1 Color

Allover Press

V2hd-fp-141 Station/ Color

V2000HD

_0415

COMMERCIAL MANUAL SCREEN PRINTERSV-1000Wrench Free

Micro-registration

The V-1000 press uses the industry's most unique �� head design which minimiz-es cost. Accurate registration is achieved without the higher price associated with machines

of this capacity.

HD Head upgrade now available so you can use larger screens and pallets, and The DiGiT numbering attachment!

Options• Utility cart for storage and mobility• HD Head upgrade• Drop-down wheel set• Service pan and wheel set• Youth, oversized*, sleeve, hat,

pocket, and polo shirt pallets

V-1000 featuresVALUE

LONG LASTING

ACCURATEPRECISE

INNOVATIVE

ADJUSTABLEVERSATILECAPACITY

GUARANTEEDSHIPS UPS

EXPANDABLE

Quality at an entry level priceSteel Pallets w/ rubber tops - interchangeable with the V-2000**Wrench free micro-registrationHolds accurate multicolor printing registration Floating Head, 3 point bearing lock allows multiple heads down6 way head leveling adjustmentAvailable up to 8 table, 8 color (8x8)Holds up to 21” x 28” (51 x 61 cm) screens3 year warranty on manufacturer’s defectsCan even ship UPS in multiple boxesFrom 1 table, 1 color (1x1) to 8 table, 8 color (8x8)

1 table, 4 color Standard size

15" x 17" (38 x 43 cm) steel pallets

shown mounted on optional utility cart

V1-T14 +

UC-1000

V1-888 table, 8 color shown

Standard size 15" x 17" (38 x 43 cm) steel pallets

*The largest pallet available is the oversized 17" x 21" (43 x 53 cm).

V-1000_0319

V1-T111 Station/1 Color




V1-444 Station/4 Color

V1-464 Station/6 Color

Accessories

ws-v1ddDrop Down Wheel

Set for V-1000

v1sp-wsService Pan and Wheel

Set for V-1000

PalletsOver 100 different

pallets to choose from!

v1-666 Station/6 Color

V-1000 MODEL GALLERYV-1000_0319

v1-888 Station/8 Color

PALLETS & ACCESSORIESVastex, quality made in the U.S.A. since 1960

Pallets_0818

Custom Sizes Available

• 13” x 11.5”• 13.5” x 11.5”• 13.5” x 17”• 14” x 14”• 15” x 17”• 16” x 20”

• 6” x 6”• 9” x 8”• 10.5” x 17”• 12” x 20”• 12” x 30”• 13” x 8.5”

• 16” x 24”• 17” x 21”• 18” x 30”• 20” x 24”• 20” x 30”• 22” x 32”

Sleeve and Leg Pallets• 2.5” x 14”• *4” x 19”• *5” x 19”• 6” x 19”

• 5” x 24”• 6” x 24”• 2⅝” x 26”

• 3” x 9”• 4” x 9• 5” x 9”• 6” x 9”

*Available Double Sleeve

Zipper Attachments

• 11” x 7.5”• 16” x 7.5”

Sold in Pairs

Clamp on Pallet Adapters

• Pocket

(Fits most pallets)

Bag Pallet Adapter• 13”W x 18”L • 14”W x 18”L

Mounts to VP-SLS419 sleeve pallet.Pallet not included.

• Polo • Over Pocket

Quick Stretch

• 6” x 6”• 9” x 8”• 10.5” x 17”

• 15” x 17”• 17” x 21”• 4” x 17”

Umbrella Pallet w/ Quick Stretch

Koozie Pallet

Print 4 Koozies at once!!

Under Brim Vacuum Pallet

Allows for printing ��hats at once with the use of a customer supplied shop vac.

Vacuum Pallet

Available as self powered or for use with customer supplied shop vac.

Universal Pallet Mount Pallet Arm for other brand pressesBracket for DIY Pallets

Pallet arm not included.Pallet Arms:V-2000: V2-ARMV-1000: V1-ARM

With 2.5” x 1.5” rotor arms.

Pallet arms for Workhorse, Hopkins, Printa, and more!Get rid of your wood pallets, and use our never warping, all steel pallets!

Pallet not included.

VASTEX PRINTS ALL OVER!

INCLUDES FOAM TOP

Allover Pallet(V2HD Only)

Hat Printing Attachments*Available with different cap pallets

��-2000 (V2C-CPB) or V-1000 (V1C-CPB)3 different style Plattens to choose from!

Wing Pallet - One Sleeve

• 21”W x 18”L • 21”W x 27”L

WS-VHD: Heavy Duty “Drop-Down” wheels for all V-2000 presses. Only raises press 3/4” of��.

VSP-WS: Service Pan and Wheel Set for any V-2000HD Press

V1SP-WS: Service Pan and Wheel Set for any V-1000 Press

Available!

Custom PalletsDownload our Pallet Spec Book for dimensions and additional products. WWW.VASTEX.COM1 in = 2.54 cm

Service Pan & Wheel Sets Side Clamps

SC-2230

SC-22

SC-2212

Removable side clamps work on most rear clamping presses.

Fixed side clamps also available for V-2000HD

• 18”W x 24”L • 24”W x 36”L

ENTRY LEVEL MANUAL SCREEN PRINTERSV-100

V-100 featuresVALUE

LONG LASTINGPRECISE

INNOVATIVE

ADJUSTABLEVERSATILECAPACITY

GUARANTEEDSHIPS UPS

EXPANDABLE

Quality at an entry level priceSteel PalletsHolds accurate multicolor printing registration Floating Head, 3 point bearing lock allows for all heads downScreen off contact and level adjustmentsAvailable up to 4 table, 4 color (4x4)Holds up to 21” x 28” (51 x 61 cm) screens1 year warranty on manufacturer’s defectsShips UPS in multiple boxes with easy step by step instructionsFrom 1 table, 1 color (1x1) to 4 table, 4 color (4x4)

V-100_0818

Dimensions25” x 25” x 10” (64 x 64 x 26 cm)25” x 17” x 9” (64 x 44 x 23 cm)13” x 13” x 10” (33 x 33 x 26 cm)

Weight69 lbs (31.3kg) 23 lbs (10.5 kg)10 lbs (4.6 kg)

V-100 Center Hub(1) Rotor Arm w/ Pallet

(1) Print Head

Shipping V-100

* Press comes unassembled with easy step by step assembly instructions.

V100-111 Station/1 ColorTabletop Press*




Optional Pallets• V100P-1016 (Youth) - 10x16” (25x41cm)• V100P-1620 (Oversized) - 16x20” (41x51cm)• V100P-SLS416 (Sleeve) - 4”x16” (25x41cm)• Pallet adapters, attachments and quick stretch available• Pallet rubber with adhesive V100-44* w/ S1-27*

4 station, 4 color shown with optional S1-27-V100MT

Standard Wattage

Belt Width x Length

Chamber (tunnel) Length

Cure times: Plastisol @ 25 secs.**

Water Based/Discharge @ 50 secs. **

Digital White Ink**

@ 2.5 min.

@ 3 min.

@ 6 min.

Features OptionsTwo temperature controllers are accurate to +/-1 degree F. Digital PID with Fuzzy logic is the most advanced in the industry.Unique cooling bed at exit, speeds up garment cooling.Cool Down Mode for easier shut down.2” - 7” (5 - 17.7 cm) belt-to-heater height adjustmentDigital belt speed voltmeter, a must have!Make-up Air and Negative Exhaust Air, removes moisture and fumes fast.Filtered air intake provides clean curing air, no recycled fumes!“X-Series” Conveyor Belt Tracking System w/HD drive.Add heat chambers and belt extensions. (rear idler required over 17’ long)

ACCURATE-

SMART

ADJUSTABLECONVENIENT

VERSATILEFILTERED

HEAVY DUTYEXPANDABLE

• Add heat chambers @ 4.5’ (137cm) long.• Belt extensions, front or rear, 18" (46 cm) increments• 3-Phase, 208, 380, 480 voltages available• Exhaust Hood, provides extra fume extraction• Hat support rail• Locking casters for easy mobility• HD Drive• Donut Probe

* All BigRed V54 Dryers come standard in Three Phase wiring.** Production speeds are estimates are based on 16” centers and will vary depending on ink manufacturer, humidity of shop, and other variables.

DTG/WATER BASED INFRARED DRYERSBIGRED 4-d SERIES

BigRed4D

_1019

• Focused exhaust system to remove fumes/moisture within chamber• Excellent air flow to cool the skin of the dryer• Dual zone heat control, four powerful infrared elements, and makeup air make it great for inkjet curing!• Filtered exhaust with fault detection

11,400w

30” x 8¾’ (76.2 x 267cm)

4.5’ (137.2cm)

475+/hr

216+/hr

72/hr

60/hr @ 3 min.

30/hr @ 6 min.

BR4D-V3022,800w

54” x 8¾’ (137.2 x 267cm)

4.5’ (137.2cm)

950+/hr

432+/hr

144/hr @ 2.5 min.

120/hr @ 3 min.

60/hr @ 6 min.

BR4D-V54*

br4d-v30 br4d-v54

PRODUCTION INFRARED DRYERSEconoRed III Series

• Digital belt speed display for more accurate control• Focused exhaust system to remove fumes/moisture within chamber• Excellent air flow to cool the skin of the dryer• Cures plastisol, water-based and discharge inks!

Standard Wattage

Belt Width x Length

Heater Width***



Water Based/Discharge @ 70 secs.**

10,800w

30” x 8.75’ (76.2 x 267cm)

24” (61cm)

4.5’ (137cm)

475+/hr

150+/hr

21,600w

54” x 8.75’ (137 x 267cm)

48” (122cm)

4.5’ (137cm)

950+/hr

300+/hr

30” Belt Version 54” Belt VersionER-III-30 ER-III-54

Features Options

* Production speeds are estimates and will vary depending on ink manufacturer, humidity of shop, and other variables.** Production speeds are estimates are based on 16” centers and will vary depending on ink manufacturer, humidity of shop, and other variables.

HEAVY DUTYPRECISE

ADJUSTABLEACCURATE

CONSISTENTINNOVATIVE

EXPANDABLE

“X-Series” Conveyor Belt Tracking System Infrared Focusing System provides more power for less $$ 2" - 7" (5 - 17.7 cm) belt-to-heater height adjustment Digital PID Temperature controller is accurate to +/-1° F Heavy duty DC belt speed motor with digital voltage display Engineered to be shorter and smaller with high heat and production.Add heat chambers and belt extensions. (HD Drive required over 17’ long)

• Add heat chambers @ 3’ (.91m) long• Belt extensions front or rear, 18” (46 cm) increments• 3 Phase & 208, 380, 480 voltages available• Exhaust Hood, provides extra fume extraction• Hat support rail• Locking casters for easy mobility• Reversing belt / HD Drive

ER-II_0120

eR-iiI-30eR-iiI-54

PRODUCTION INFRARED DRYERSEconoRed II Series

• Digital belt speed display for more accurate control• Focused exhaust system to remove fumes/moisture within chamber• Excellent air flow to cool the skin of the dryer• Cures plastisol, water-based and discharge inks!

Standard Wattage

Belt Width x Length

Heater Width***



Water Based/Discharge @ 70 secs.**

7,200w

30” x 7¼’ (76.2 x 220cm)

24” (61cm)

3’ (91.4cm)

300+/hr

100+/hr

14,400w

30” x 10¼’ (76.2 x 312cm)

24” (61cm)

6’ (183cm)

600+/hr

200+/hr

14,400w

54” x 7¼’ (137 x 220cm)

48” (122cm)

3’ (91.4cm)

600+/hr

200+/hr

28,800w

54” x 10¼’ (137 x 312cm)

48” (122cm)

6’ (183cm)

1,200+/hr

400+/hr

30” Belt Version 54” Belt VersionER-II-30 ER-II-30-2 ER-II-54 ER-II-54-2

Features Options

* Production speeds are estimates and will vary depending on ink manufacturer, humidity of shop, and other variables.** Production speeds are estimates are based on 16” centers and will vary depending on ink manufacturer, humidity of shop, and other variables.

HEAVY DUTYPRECISE

ADJUSTABLEACCURATE

CONSISTENTINNOVATIVE

EXPANDABLE

“X-Series” Conveyor Belt Tracking System Infrared Focusing System provides more power for less $$ 2" - 7" (5 - 17.7 cm) belt-to-heater height adjustment Digital PID Temperature controller is accurate to +/-1° F Heavy duty DC belt speed motor with digital voltage display Engineered to be shorter and smaller with high heat and production.Add heat chambers and belt extensions. (HD Drive required over 17’ long)

• Add heat chambers @ 3’ (.91m) long• Belt extensions front or rear, 18” (46 cm) increments• 3 Phase & 208, 380, 480 voltages available• Exhaust Hood, provides extra fume extraction• Hat support rail• Locking casters for easy mobility• Reversing belt / HD Drive

ER-II_1019

eR-ii-30er-ii-54

Now with w

hisper

quiet oper

ation!

• Additional chambers can be added as well as belt extensions• Locking casters for easy mobility• Creeper gear • Donut Probe

LR-X3D-30

Features Options

* Production speeds are estimates are based on 16” centers and will vary depending on ink manufacturer, humidity of shop, and other variables.

Littlered X-D SERIES

LR-D

_0120

Total Wattage

Belt Width

Heater Width

Conveyor Length

Chamber Length

Powered Exhaust

Cure Times*

Plastisol @ 25 secs

Waterbased/Discharge @ 50 secs

Digital White Ink*

@ 2 min.

@ 3 min.

HEAVY DUTY

ACCURATEADJUSTABLE

EXHAUSTCONSISTENTEXPANDABLE

“X-Series” Conveyor Belt Roller Tracking System with Teflon coated fiberglass belt and HD belt motorDual digital PID Temperature controller is accurate to +/-1°F2” - 7” (5 - 17.7 cm) belt-to-heater clearance, adjustable separately on each side for each heaterHigh powered exhaust to remove fumes and moisturePrecision DC belt speed control w/ digital displayAdd additional heat chambers and conveyor extensions

Advanced technology speedscuring of ink jet, water-based

and discharge inks.

17,800w

54” (137 cm)

48” (122 cm)

88” (224 cm)

41” (104 cm)

550 CFM(15.6 CMM)

720+/hr

370+/hr

154/hr

103/hr

LR-X3D-54LittleRed X2-D LittleRed X3-D

LittleRed Digital series dryers have a dual zone heat control, with a boost zone to quickly reach cure temperature. This makes it GREAT Inkjet curing! With a second X3 chamber, the LR-X3D-30-2 and LR-X3D-54-2 can handle higher production including longer times necessary for Kornit printers.

8,900w

30” (76 cm)

24” (61 cm)

88” (224 cm)

41” (104 cm)

388 CFM(11 CMM)

360+/hr

185+/hr

77/hr

51/hr

lr-x3D-54

lr-x2D-30

LR-X2D-306,300w

30” (76 cm)

24” (61 cm)

66” (168 cm)

27” (69 cm)

177 CFM(5 CMM)

240+/hr

122+/hr

51/hr

34/hr

DTG/WATER BASED INFRARED DRYERS

LR-X3D-7826,700w

78” (198 cm)

72” (183 cm)

102” (260 cm)

41” (104 cm)

1,100 CFM(31.2 CMM)

1,080+/hr

555+/hr

231/hr

155/hr

lr-x3D-78

LR-X1D-182,280w

18” (46 cm)

18” (46 cm)

48” (122 cm)

18” (46 cm)

177 CFM(5 CMM)

162+/hr

81+/hr

34/hr

23/hr

lr-x1d-30

LittleRed X1-DLR-X1D-30

4,050w

30” (76 cm)

24” (61 cm)

48” (122 cm)

18” (46 cm)

177 CFM(5 CMM)

162+/hr

81+/hr

34/hr

23/hr

Features Options

Total Wattage

Belt Width

Heater Width**

Conveyor Length

Chamber Length

Powered Exhaust

Cure Times: Plastisol @ 25 secs.*

Waterbased/Discharge @ 70 secs.*

5,200w @240V

30” (76cm)

24” (61cm)

84” (2.13m)

36” (92cm)

177 CFM (5 CMM)

260+/hr

90+/hr

Dual Infrared ElementsLR-X2-30

HEAVY DUTY

ACCURATEADJUSTABLE


“X-Series” Conveyor Belt Roller Tracking System with 30” (76 cm) or 54” (137 cm) wide Teflon coated fiberglass beltDigital PID Temperature controller is accurate to +/-1°F2” - 7” (5 - 17.7 cm) belt-to-heater clearance, adjustable separately on each side for each heaterPowered exhaust to remove fumes and moistureDC belt speed control w/ digital displayAdd 18” (46cm) and 36” (92 cm) chambers and/or 18” (46 cm) belt extensions

• Additional chambers can be added as well as belt extensions• Heavy duty belt motor (Standard on X2-54)• Locking casters for easy mobility

* Production speeds are estimates are based on 16” centers and will vary depending on ink manufacturer, humidity of shop, and other variables.** Recommended maximum image width = heater width minus 4” (10cm).

LittleRed_X2X3_0319

Three Infrared ElementsLR-X2-5410,400w @240V

54” (137.2cm)

48” (122cm)

84” (2.13m)

36” (92cm)

388 CFM (11 CMM)

520+/hr

180+/hr

lr-x2-30

All LittleRed series dryers have a tilting heater design. Works great for curing hats!!

MID-LEVEL INFRARED DRYERSLittleRed Series

lr-x2-54

lr-x3-30 lr-x3-54

Three Infrared Elements

7,800w @240V

30” (76cm)

24” (61cm)

88” (2.24m)

41” (104m)

388 CFM (11 CMM)

360+/hr

120+/hr

15,600w @240V

54” (137.2cm)

48” (122cm)

88” (2.24m)

41” (104cm)

550 CFM (15.6 CMM)

720+/hr

240+/hr

LR-X3-30 LR-X3-54Dual Infrared Elements

Features Options

Total Wattage

Belt Width

Heater Width**

Conveyor Length

Chamber Length

Powered Exhaust

Cure Times: Plastisol @ 50 secs.*

Waterbased/Discharge @ 70 secs.*

30” (76cm)

24” (61cm)

48” (122m)

18” (46cm)

177 CFM (5 CMM) optional

130+/hr (240v) - 90+/hr (120v)

45+/hr (240v or 120v)

Single Infrared ElementLR-X1-30

2,000w @120V2,600w @240V

HEAVY DUTY

ACCURATEADJUSTABLE


“X-Series” Conveyor Belt Roller Tracking System with 30” (76 cm) or 54” (137 cm) wide Teflon coated fiberglass beltDigital PID Temperature controller is accurate to +/-1°F2” - 7” (5 - 17.7 cm) belt-to-heater clearance, adjustable separately on each side for each heaterPowered exhaust to remove fumes and moisture (optional)DC belt speed control w/ digital displayAdd 18” (46cm) and 36” (92 cm) chambers and/or 18” (46 cm) belt extensions

• Additional chambers can be added as well as belt extensions• Powered exhaust• Heavy duty belt motor• Locking casters for easy mobility• Chambers can be purchased separately to add onto any

LittleRed, EconoRed and BigRed dryer


LittleRedX1_0319

Single Infrared ElementLR-X1-54

5,200w @240V

54” (137.2cm)

48” (122cm)

66” (168cm)

18” (46cm)

388 CFM (11 CMM) optional

260+/hr

90+/hr

lr-x1-30

All LittleRed series dryers have a tilting heater design. Works great for curing hats!!

MID-LEVEL INFRARED DRYERSLittleRed X1

lr-x1-54120V available

Chamber only is a great addition onto any existing LittleRed, EconoRed or BigRed dryer

HeaterWattage

Belt Width / Conveyor LengthHeater Width**

Power Requirements

Chamber (tunnel) LengthCure Speed - Plastisol @ 25 secs.*Waterbased/Discharge @ 70 secs.*

Assembled Dimensions

16” x 16” (40.64 x 40.64 cm)

1,625 watts (1.625 kW)

18” (45.7cm) x 46” (1.17m)

16” (40.6cm)

120V, NEMA 5-15P, 12.5A

240V, NEMA 6-15P or Int’l plugs, 6.5A

18” (45.7cm)

110/hr

50/hr

46” x 24” x 24” (119 x 61 x 61 cm)

D-10016” x 20” (40.64 x 50.8 cm)

2,050 watts (2.05 kW)

26” (66cm) x 46” (1.17m)

20” (50.8cm)

120V, NEMA 5-20P, 16.5A

240V, NEMA 6-15P or Int’l plugs, 8.2A

18” (45.7cm)

110/hr

50/hr

46” x 32” x 24” (119 x 81 x 61 cm)

D-1000

Features OptionsSMART

ADJUSTABLE FAST PRECISE

VALUABLE COMPACT

EXPANDABLE

Teflon coated fiberglass belt with tracking systemSpeed, temperature, heater height and tilt110+* shirts per hour with plastisol and 50+* with dischargePowerful infrared heater with tight coil pattern and heat shields Best warranty, high quality, exceptional serviceTotal footprint is less than 8 sq.ft (2.44 sq.m) on the D-100 and about 10 sq.ft. (3 sq.m.) on the D-1000Optional 10” (25.4 cm) conveyor extension for D-1000

S1-27

Our dense coil pattern, heater shields and a 6.35 watt per sq-in infrared

heater eliminates hot and cold spots.

For more compact shipping, the D-100 and D-1000 are partially

assembled. Optional factory assembly at additional charge.


The S1-27 is a sturdy, mobile stand with wheels.

ENTRY LEVEL INFRARED DRYERSD1-SERIES

D1-SER

IES_0319

Must add S1-27-DEMT option for D-1000

INFRARED FLASH CUREF-series

Features F-1000

Options

F-100

Heater Size

Power (Wattage)

Power Plug

16” x 16” (41 x 41 cm)

1,625w @ 120v or 240v

NEMA 5-15P or 6-15P

F-10018” x 18” (46 x 46 cm)

1,950w @ 120v or 2,600w @ 240v

NEMA 5-20P or 6-15P

F-1000

f-1000Shown with standard stand

f-10016” x 16” Heater

On/off power switchIncludes levelers

f-100018” x 18” Heater

Heat controlIncludes wheels

High wattage and close coil density heater, for greater heater surface

consistency.

Great heaters along with our built in heat shields

allows Vastex flashes to be set closer to your garment, which increases efficiency

and productivity.

RELIABLEPOWERFUL

USER FRIENDLYCONVENIENT

UNIQUESMART

15 Year Heater Warranty1,625 Watt IR HeaterOn/off power switch

Heavy duty side handlesHead leveler to adjust the heater parallel to the pallet

Heat shields for even heater temperature

15 Year Heater Warranty1,950 or 2,600 Watt IR HeaterHeat control with power lights

Heavy duty side handles and locking wheelsHead leveler to adjust the heater parallel to the pallet

Heat shields for even heater temperature

AutoFlash Rotary Table

** Domestic plugs listed. International cords available.

F-Series_0718

Super HeavyDuty Stand

AutoFlash Rotary TableSuper HeavyDuty Stand

AIR-FLASHA 140 CFM blower draws air through an oversized

filtered intake, sends it through an air diverter, then distributes it evenly across the entire heater face.

The heat and air flow are both adjustable.Add an AutoFlash for the most versatile flash

cure in the industry!

Adjustable air flow keeps skin cool in any position.

Heater Size

Power (Wattage)

Power Plug

18” x 18” (46 x 46cm)

3,500w @ 240v

NEMA 6-20P**

RA-18-24018” x 24” (46 x 61cm)

4,300w @ 240v

NEMA L6-30P** (Sold separate)

RA-1824

RELIABLEPOWERFULVERSATILE

SMARTCLEAN

15 Year Heater Warranty3500 watt (18 x 18) or 4300 watt (18 x 24) heaterAir only, full heat and air, or modulate air velocity and heat. Adjustable heat shield helps maintain heater surface consistencyLarge filtered air intake delivers clean air to heater

ADJUSTABLEEFFICIENT

FASTCONVENIENT

Heat, air speed, heat shield, height and levelAir cooled outer skin and side handlesFlash plastisol in as little as 4 secondsHeavy duty side handles & locking casters

AIR-FLASH 18Shown with Standard Stand


Features

Options

AirFlash_1118INFRARED FLASH CURE

AutoFlash Rotary TableSuper HeavyDuty Stand

redflashHigh wattage and coil density heater, for great-

er heater surface consistency.

And now with the Vastex cooling fan and air curtain, Vastex flashes can be set closer to

the work which increases efficiency and productivity.

redFLASH18” sqShown with Standard Stand

Features

Options

Heater Size

Power (Wattage)

Power Plug

18” x 18” (46 x 46cm)

2,600w @ 240v

NEMA 6-15P**

R-18-24018” x 24” (46 x 61cm)

3,500w @ 240v

NEMA 6-20P**

R-1824-24018” x 18” (46 x 46cm)

3,500w @ 240v

NEMA 6-20P**

R-18-240-HO

RELIABLE POWERFUL USER FRIENDLY CONVENIENT

15 Year Heater Warranty2600 or H.O. 3500 Watt heater (3500 standard 1824)Diagnostic pilot lights & heat controlHeavy duty side handles & locking casters

EFFICIENT FASTEST UNIQUE

THIN PROFILE

High wattage and high heater densityHO heater flashes plastisol in as little as 4secHead leveler, cooling fan and air curtains. Ultra slim 2.75” (7 cm) height head


RedFlash_0518

INFRARED FLASH CURE

PIN REGISTRATION SYSTEMvrs-l-xxVRS LITE

Features

How it Works

Shipping

Separate components for screen room and press

department

Press Type

Max Screen Size

Pallet Width

Setup Sheets Included

Max Screen Clamp Width

Use with Side Clamps

Manual

21” x 24” (53 x 61cm)

14” to 17” (35 to 43cm)

1 pack (12 sheets)

15” wide (38cm)

N/A

VRS-L-XX**

FASTUSER FRIENDLY

UNIVERSAL

Register single and multi-color jobs in a fraction of the time to start printing quicker.Takes the guess work out of lining up your positives on the screen.Works with any exposing unit, screen, rear clamp manual press [15” (38cm) maximum clamp width] and most side clamp presses

1. Attach your positives in register to setup sheets using an alignment grid backdrop.2. Locate and attach your positives in register to your screens, using the Vastex pin board with screen stops.3. Burn all your screens in register with any exposing unit.4. Accurately locate and clamp each screen onto your press using the Vastex pallet jig or VRS LITE board.

** XX=Pallet width

Automatic PressesAmericanAnatolBrownLawsonM&R

PrintexRoqWorkhorseCall for others

VRS_0818

Registration Station

Automatic

Press specific

Press specific

2 packs (24 sheets)

Press specific

Varies

VRST-RMXX**

A completed data sheet may be required to properly configure your VRS.

Manual

23” x 31” (58 x 79cm)

14” to 21” (35 to 53cm)

2 packs (24 sheets)

15” wide (38cm)

Yes (Must be specified)

All in one Unit!Perfect for small shops looking to save space.

Dimensions

Weight35 x 25 x 5” (89 x 64 x 13 cm)

21 lbs (9.6 kg)

VRS-L-XX** VRST-RMXX**Please contact Vastex for shipping

weights and dimensions

VRST-AXX**Please contact Vastex for shipping

weights and dimensions

manual pressesPallet jig for

automatic pressesPallet jig for

VRST-AXX**

Shown withoptional drawers

e-2000

Long-lasting LED lights deliver ultra-fast exposure times while producing high resolution half-tones and crisp detail.

LED CTS EXPOSURE UNITe2-CTS-2536

New LCD touchscreen makes it easier to set and save up to 10 preset exposure times.

Screen Size (Max OD)

Screen Size (Min OD height)

Image Area

Bulbs

Controls

E-2000 CTS SeriesE2-CTS-2536

Features OptionsExpose screens as fast as metal halide with no waiting for vaccuum blanket Expose very fine detail, halftones, 85 lpi Operates at 20% of the power required for metal halideOne touch auto controlSlim design uses very little floor spaceScreen holder moves to accomidate screens from 23” (58 cm) to 37” (94 cm) tallANY emulsion Holds up to plastisol, waterbased and solvent based inks 3 year warranty on manufacturer’s defects*5 year warranty on LED lights

FASTQUALITY

EFFICIENT SMART

COMPACT ADJUSTABLE

EXPOSEDURABLE

GUARANTEED

• 120V or 240V

* Excludes rubber blanket

E2_CTS_0718

25” x 37” (63 x 94 cm)

23” (58 cm)

18.5” x 30” (47 x 76 cm)

(6) 30” (76 cm) light bars

LCD Touchscreen

e200-2128

e-200 e-2000

Long-lasting LED lights deliver ultra-fast exposure times while producing high resolution half-tones and crisp detail.

LED EXPOSURE UNITS

e2-2536

New LCD touchscreen makes it easier to set and save up to 10 preset exposure times. (E-2000

and E-1000)


Image Area

Bulbs

Compression Type

Controls

E-200 Series E-2000 SeriesE200-2128 E200-2331 E2-2536 E2-5236

Features OptionsExpose screens as fast as metal halide Expose very fine detail, halftones, 85 lpi Operates at 20% of the power required for metal halideOne touch auto controlVacuum hold down for excellent screen to film contact Slim design allows mounting on drying cabinet ANY emulsion Holds up to plastisol, waterbased and solvent based inks 3 year warranty on manufacturer’s defects*5 year warranty on LED lights

FASTQUALITY

EFFICIENT SMART POWERFUL

COMPACT EXPOSE

DURABLEGUARANTEED

• 120V or 240V• S1-27 and S1-27-DEMT stand with wheels (E-200 only)• Dri-Cab with air circulation (E-200 only)• Dri-Vault with heated air• Locking Casters (E-2000 only)


E2_Series_0818

21” x 28” (53 x 71 cm)

15” x 18” (38 x 46 cm)


Lid with Vacuum Pump

One Touch Operation

23” x 31” (58 x 78 cm)

16” x 33” (40 x 83 cm)



One Touch Operation

25” x 36” (63 x 91 cm)

24” x 36” (61 x 91 cm)



LCD Touchscreen

52” x 36” (132 x 91 cm)

46” x 36” (116 x 91 cm)



LCD Touchscreen

2 Sizes Available 2 Sizes Available

One touch angled controlpanel (E-200 and E-100)

e-100 e-1000

New LCD touchscreen makes it easier to set and save up to 10 preset exposure times. (E-2000

and E-1000)One touch angled control

panel (E-200 and E-100)


Image Area

Bulbs

Compression Type

Controls

E-100 Series E-1000 SeriesE100-2128-LB E100-2331 E1-2536 E1-5236

Features OptionsPowered vacuum hold down contours rubber blanket to screen for excellent screen to film contact (excludes E-100-LB)Vacuum draws through bottom manifold, no holes in rubber blanket (ex-cludes E-100-LB)Electronic ballasts for quick starts & steady UV outputTimer controls lights & vacuum preciselyUnfiltered UV fluorescent bulbs Angled control panel w/ one touch operation3 year warranty on manufacturer’s defects*.25” (.63 cm) thick tempered glass, virtually eliminates breakage

POWERFUL

SMART

CONSISTENT ACCURATE

BRIGHTCOVENIENT

GUARANTEEDDEPENDABLE

• 120V or 240V• S1-27 and S1-27-DEMT stand with wheels (E-100 only)• Dri-Cab with air circulation (E-100 only)• Dri-Vault with heated air• Locking Casters (E-1000 only)


E1_Series_0818

21” x 28” (53 x 71 cm)

15” x 18” (38 x 46 cm)

(4) 20 watt black UV

Pressure pad

One Touch Operation

23” x 31” (58 x 78 cm)

16” x 33” (40 x 83 cm)



One Touch Operation

25” x 36” (63 x 91 cm)

18” x 27” (45 x 68 cm)



LCD Touchscreen

e1-5236

e100-2128-lb

FLUORESCENT EXPOSURE UNITS

e100-2128

52” x 36” (132 x 91 cm)

47” x 27” (119 x 68 cm)



LCD Touchscreen

E100-212821” x 28” (53 x 71 cm)

15” x 18” (38 x 46 cm)



One Touch Operation

2 Sizes Available 2 Sizes Available

e2-2128-vdcE-200 w/ Drying cabinet

Dimensions43” x 29” x 9”34” x 29” x 8”

Weight121 lbs15 lbs

Unassembled ShippingDimensions43” x 35” x 40”

Weight212 lbs

Assembled Shipping (crated)

RELIABLECAPACITY

POWERFULPRECISE

EFFECTIVE

SECUREFASTEASY

3 Year WarrantyHolds ten (10) 23” x 31” (58 x 79 cm) screens of any typeOne (1) 91-113 CFM (2.6-3.2 CMM) air flow blower Light tight design prevents screen exposureScreens sit horizontal on removable shelves (angled to provide edge contact only)One (1) sealed latching doorDries emulsion as quickly as 60 minutes** Simple to clean or replace filtered air intake

Dry your screens securely in the 10 screen Dri-Cab. Powered fan with filtered air flow can have your screens ready for exposure, in as little as 60 MINUTES!**

Stainless steel shelves for rustproof drying120v, 200v or 240vMount rails for E-100, E-1000 or E-200Assembly

Options

3 YEAR

WARRANTY*

*

ENTRY LEVEL DRYING CABINETDri-cab

Dri-C

ab_1217

vdc-2331Holds (10) 23” X 31” (58 X 79cm) screens

Easily replaceable filter keeps dust and other contaminents away from your screens.

RELIABLEHEAVY DUTY

CAPACITY

POWERFUL

CONSISTENT

EFFECTIVE

SECURE

CONTROL

FASTEFFICIENT

PRECISEEASY

3 Year WarrantyIndustrial stainless steel finned heater(s)Holds ten (10) or twenty four (24) 25” x 36” (63.6 x 91.4 cm) screens of any typeOne (1) 177 CFM (5 CMM) air flow blower or Two (2) 177 CFM (5 CMM) air flow blowersPressurized cabin with positive air flow keeps out contaminants even if an air leak occursScreens sit horizontal on removable shelves (angled to provide edge contact only)One (1) sealed latching door 10 screen or two (2) individually sealed latching doors on the 24 screen unit10 and 20 screen cabinet has Hi-Low heat adjustment OR the 24 screen cabinet has breaker on/off switch, pilot light, digital temperature control, both have ability to run air only or variable heat.Dries emulsion as quickly as 20 minutes** 4” (10 cm) exhaust duct for contaminated air removalLight tight heavy duty double wall Simple to clean or replace filtered air intake

Dry your screens securely in the 10 or 24 screen Dri-Vault. Variable heat and powerful filtered air flow can have your screens ready for exposure, in as little as 20 MINUTES!**

Stainless steel shelves for rustproof drying240 Volt (standard on 24 screen cabinet)Expanded Depth for MHM style screens with pins (24 screen cabinet)Digital Temperature Controller for 10 screen Dri-Vaults

Options



vdc-513610Holds (20) 25” X 36” (63 X 91cm) screensor (10) 51” X 36” (130 X 91cm) screens

**Drying times will vary. Humidity, thickness and type of emulsion used, and size of screens are factors in Dri-Vault curing time.

3 YEAR WARRANTY**

SCREEN DRYING CABINETDri-vault

DriVault_0415

Exposure units can be mounted to 10 and 20 screen drying cabinets to save space.

D g T

Shown is a four color press with a two color, 8” DiGiT numbering system

Convert ANY* rear clamping manual press into a numbering machine in 20 seconds

Compensates for the narrow #1 by allowing 5 unique positions for

each digit from 0 to 9.

Tired of using heat transfers, stencils, or turning away number printing jobs?

The DiGiT is a clamp-in numbering ��YOUR press.

The DiGiT slide locates each number for fast and precise printing.

With DiGiT, you print consecutive numbers as fast as regular spot printing.

Features:

• Print 2 to 3 times faster than any other comparable number system!

• Register numbers instantly and precisely with an easy to see sight rail.

• ��color prints.

• Unique sight rail with target makes printing easy.

• Have a side clamp machine? We have a solution, call us for information.

Advanced Number Spacing

CORRECT INCORRECTINCORRECT

*Requires a well built press with the capacity to hold a 26 lb attachment and at least two print heads for one color or four for a 2 color number.

*V1000 kits includes HD head upgrade and V2000 kit includes double gas springs.

ATHLETIC NUMBERING ATTACHMENTD

IGIT_0119

DiGiT attachment with detent and site rails

Complete kits include pre-exposed screens.

Choose from 7 available fonts.Film positives, blank screens also available

D g TJR.

Shown with 8” screens on a V-1000 with no additional springs. Made to be used on lighter duty presses and

uses 20”x24” user supplied screens.

2”, 4”, 6”, 8”, 10” and 12”One or two color.

4”, 6” and 8”One color only.

C-100 w/C-100-stand

Holds your screen in place to achieverepeatable results!

• Holds screen lengths 23” (60cm), 28” (70cm), 31” (80cm), 36” (90cm)

• Quick height adjustment

• No tools needed to make height or screen length adjustments

• Standard coater comes with wall mount and hardware

Dimensions43” x 12” x 7” (109 x 31 x 18 cm)35” x 11” x 7” (89 x 28 x 18 cm)

67” x 31” x 20” (170 x 79 x 51 cm)

Weight18 lbs (8.2 kg)23 lbs (10.5 kg)220 lbs (100 kg)

Shipping

C-100 Base UnitC-100 Stand

C-1000

C-100 shown w/optional stand

Semi-Auto screen coater rack

Manual, wall mount screen coater rack

• Includes scoop coater shelf

• Foot pedal operation• Digital speed control

Screen Coater RacksScreen_C

oater_0519

C-1000 C-100

• 120v or 240v

SHOP ORGANIZERSUtility Cart UC-1000 Options

• Squeegee side shelves• Additional inner shelves• Door kit• Mounting kits available

for many products

High strength Utility Cart can be used as a stand for shop equipment!!

CAPACITYMOBILE

ADJUSTABLECONVENIENT

LIGHT TIGHT

DIMENSIONS

Holds up to 23” x 31” Screens.Locking casters for easy mobilityConfigure the shelves how you want them!Optional side shelves for storing squeegees, ink scoops & small tools (up to 4)Optional door kit turns cart into storage unit for coated screens.32” x 26” x 32” (81 x 66 x 81cm)

Shipping: 29” x 42” x 6” @ 98lbs (74 x 107 x 16cm @ 44.5kg)

Screen Rack��convenient sizes with angled shelves to contact only the egde of the screen. Screen racks include a 1 year warranty on manufacturer’s defects.

Heavy Duty Shelving Pallet RackVSU-4812 / VSU-4824

Heavy duty shelves with optional wheels are available in two sizes. Shelf capacity is 300 lbs each.

CAPACITY (2 sizes)

SIZE ASSEMBLED

48” W x 24” D x 12 3/4” T shelves (122 x 61 x 32.4cm) or48” W x 12” D x 12 3/4” T shelves (122 x 30.5 x 32.4cm) 48 1/2 x 24 1/2 or (12 1/2) x 72” tall

Shown with twelve (12) V2 pallet mounts.

VP-CRUISER

Must add V1 and V2 pallet mounts separatelyHolds up to (12) V2 or (18) V1 mounts

Conveniently store and organize your pallets for V-1000 and V-2000HD with this heavy duty rack on wheels.

Mount for V-1000 - 11-02-006-0 - $7.50/eachMount for V-2000HD - 11-02-005-0 - $7.50/each

Choose your size

23” wide (58cm)24.5” x 29” x 71” tall(62 x 73.7 x 180cm)

2 @ 43” x 29” x 9” (37 lbs)

2 @ 109x74x23cm (16.8kg)

32” x 6” x 6” (13 lbs)

81 x 15 x 15cm (5.9kg)

SR-2336” (91cm)

24.5” x 41” x 71” tall62 x 107 x 180cm)

2 @ 43” x 29” x 9” (37 lbs)

2 @ 109x74x23cm (16.8kg)

44” x 6” x 6” (18 lbs)

112 x 15 x 15cm (8.2kg)

SR-3631” (79cm)

24.5” x 36” x 71” tall(62 x 91.4 x 180cm)

2 @ 43” x 29” x 9” (37 lbs)

2 @ 109x74x23cm (16.8kg)

38” x 6” x 6” (15 lbs)

97 x 15 x 15cm (6.8kg)

SR-31

Organizers_0120

CapacityAssembled

DimensionsShipping

(Box #1 & 2)(Box #3)

28” (71cm)24.5” x 33” x 71” tall(62 x 84 x 180cm)

2 @ 43” x 29” x 9” (37 lbs)

2 @ 109x74x23cm (16.8kg)

38” x 6” x 6” (15 lbs)

97 x 15 x 15cm (6.8kg)

SR-2838” (96cm)

24.5” x 43” x 71” tall62 x 109 x 180cm)

2 @ 43” x 29” x 9” (37 lbs)

2 @ 109x74x23cm (16.8kg)

44” x 6” x 6” (18 lbs)

112 x 15 x 15cm (8.2kg)

SR-38(MHM Screens)

ACCESSORIESWashout Booth

Fits up to 25” x 36” screens Fits (1) 47” x 31” screenor (2) 25” x 36” screens

Exhaust HoodEFFICIENT

CONVENIENTEASY

USER FRIENDLY COMPATIBLE

Booster exhaust system reduces fumes at exit of dryerIndependent power and controlSnap on or off for easy mobility & maintenanceDiagnostic pilot light & on/off switch120V , optional 240V*, or optional CE*

Model EC-EX (pictured): For dryers with belt width of 24”-36” (61-91cm)(120V) 200cfm, 2.1 amps, NEMA 5-15P plug(240V) 290cfm, 1.0 amps, NEMA 6-15P plug

Model EC-EX54: For dryers with belt width of 48”-60” (122-152cm)(120V) 200cfm, 2.1 amps, NEMA 5-15P plug(240V) 290cfm, 1.0 amps, NEMA 6-15P plug

Heat Presses

DC1614” x 16” (36 x 41 cm)Digital Combo

DC20S16” x 20” (41 x 51 cm) Digital Swinger

DK2016” x 20” (41 x 51 cm) Digital Clamshell

JetPress 14 12” x 14” (30 x 36cm)Clamshell

DK3 Digital Mug Press

Accessories_0519

Features Frosted acrylic back panel Stainless steel constructionSqueegee shelves, 3” (7.6cm) wideScreen standoff

Optional Vacuum Toolremoves excess water from screens for quicker drying

Overall Dimensions (H x W x D)

Inside Dimensions (H x W x D)

Distance of drain to floor

Optional Light Kit

Shipping

69” x 42” x 27” (175 x 107 x 69 cm)

41” x 36” x 27” (104 x 91 x 69 cm)

26” (66 cm)

24” (61cm) long - VWB-LK2 (120v or 240v)

39” x 50” x 16” (99 x 127 x 41 cm)

@ 170lbs (77.1kg)

VWB-3627-AC69” x 58” x 27” (175 x 148 x 69 cm)

41” x 51” x 27” (104 x 129 x 69 cm)

26” (66 cm)

48” (122cm) long - VWB-LK4 (120v or 240v)

53” x 33” x 35” (135 x 84 x 89 cm)

@ 250lbs (113.4kg)

VWB-5127-AC

Optional light kit fits new and existing Vastex washout booths

with translucent back panel.May fit other brand booths.

Training Classes3 day Training

Classes are held in Bethlehem, PA

• Screen coating• Screen frame and mesh selection• Exposure control and emulsion choices• Registration and multicolor printing

Course includes complete training in:• Identifying and solving problems• Special inks and procedures• Curing and flashing• Screen cleaning and reclaiming

• Up Close and Personal• Hands On Experience• Prepress Through Reclaiming

$500

onsite training

��Includes but not limited to:

3 Day Class for /student

• Installation of new quipment• Staff Training• Advanced techniques• Production efficiency improvement

$895 /Day +expenses, Domestic (3 day min)$1,000 /Day +expenses, International (5 day min)

Visit www.vastex.com for current schedule or to sign upor call 1-800-482-7839

V-2000HD Technical Specifications V-2000HD Series V2HD-44 V2HD-46 V2HD-66 V2HD-88 V2HD-1010 V2HD-FP-

14 V2HD-FP-11 V2HD-14-T V2HD-11-T

Warranty 25 year* 25 year* 25 year* 25 year* 25 year* 25 year* 25 year* 25 year* 25 year*

Pallet Materials Steel w/ rubber tops

Steel w/ rubber tops








Head Lifting Spring Gas Spring Gas Spring Gas Spring Gas Spring Gas Spring Gas Spring Gas Spring Gas Spring Gas Spring

All Heads Down via Fixed Heads Fixed Heads Fixed Heads Fixed Heads Fixed Heads Fixed Heads Fixed Heads Fixed Heads Fixed Heads

Micro-registration Advanced, wrench-less, & anti-

backlash

Advanced, wrench-less, & anti-

backlash

Advanced, wrenchless, & anti

-backlash

Advanced, wrenchless, & anti

-backlash Advanced, wrench-

less, & anti-backlash Advanced, wrench-




less, & anti-backlash

Leveling Advanced Advanced Advanced Advanced Advanced Advanced Advanced Advanced Advanced

Height legs to pallet 34.5" (88 cm) 34.5" (88 cm) 34.5" (88 cm) 34.5" (88 cm) 34.5" (88 cm) 34.5" (88 cm) 34.5" (88 cm) 34.5" (88 cm) 34.5" (88 cm)

Height legs (w-wheels) to pallet 38.5" (98 cm) 38.5" (98 cm) 38.5" (98 cm) 38.5" (98 cm) 38.5" (98 cm) 38.5" (98 cm) 38.5" (98 cm) 38.5" (98 cm) 38.5" (98 cm)

Diameter (Standard) 91" (231 cm) 97" (246 cm) 99" (252 cm) 109" (277 cm) 131" (333 cm) 91" (231 cm) 53" (135 cm) 87" (221 cm) 51" (130 cm)

Diameter (Fully Extended) 105" (267 cm) 105" (267 cm) 111" (282 cm) 121" (307 cm) 137" (348 cm) 98" (249 cm) 60" (152 cm) 94" (239 cm) 58" (147 cm)

39" (99 cm) 27" (69 cm) 27" (69 cm) 23" (58.5 cm) 25" (63.5 cm) 39" (99 cm) Unlimited w/ Double gas

springs 39" (99 cm)

Unlimited w/ Double gas

springs Maximum Screen Width w/ optional side clamps 24" (61 cm) 24" (61 cm) 24" (61 cm) 21" (53 cm) 21" (53 cm) 24" (61 cm) 24" (61 cm) 24" (61 cm) 24" (61 cm)

Max. Screen Weight 8 lbs (3.6 kg) 8 lbs (3.6 kg) 8 lbs (3.6 kg) 8 lbs (3.6 kg) 8 lbs (3.6 kg) 8 lbs (3.6 kg) 8 lbs (3.6 kg) 8 lbs (3.6 kg) 8 lbs (3.6 kg)

Max. Screen Weight w/ double gas springs

30 lbs (13.6 kg)

30 lbs (13.6 kg)

30 lbs (13.6 kg)

30 lbs (13.6 kg) 30 lbs (13.6 kg) 30 lbs (13.6 kg) 30 lbs (13.6 kg) 30 lbs (13.6 kg) 30 lbs (13.6 kg)

Max. Screen Weight w/ HD Head upgrades

50 lbs (22.7 kg)

50 lbs (22.7 kg)

50 lbs (22.7 kg)

50 lbs (22.7 kg) 50 lbs (22.7 kg) 50 lbs (22.7 kg) 50 lbs (22.7 kg) 50 lbs (22.7 kg) 50 lbs (22.7 kg)

Maximum Standard Pallet size

27” x 32” (69 x 81 cm)

Larger custom sizes available

27” x 32” (69 x 81 cm)


27” x 32” (69 x 81 cm)


27” x 32” (69 x 81 cm)


27” x 32” (69 x 81 cm)


48” x 40” (122 x 102 cm) Larger custom sizes available

48” x 40” (122 x 102 cm)


48” x 40” (122 x 102 cm)


48” x 40” (122 x 102 cm)


Fits Through 33" (84 cm) Doorway Yes w/ disassembly

Yes w/ disassembly

Yes w/ disassembly

Yes w/ disassembly

No Requires dock

door Yes Yes Yes Yes

Unit Weight 400 lbs (182 kg)

473 lbs (214.5 kg)

550 lbs (250 kg)

750 lbs (340 kg)

1075 lbs (488 kg)

250 lbs (113.4 kg)

134 lbs (60.8 kg)

193 lbs (87.6 kg)

73 lbs (33.1 kg)

Can Ship UPS No No No No No No No No Yes

Shipping Weight** 685 lbs (311

kg) 710 lbs (322

kg) 800 lbs (363

kg) 1,025 lbs (465

kg) 1,423 lbs (646

kg) 512 lbs (232 kg) 412 lbs (187 kg) 350 lbs (159 kg) 281 lbs (128 kg)

or (UPS)

120 lbs (55kg) Shipping Dimensions**

(1) 48" x 48" x 49" [122 x 122 x 125

cm]

(1) 48" x 48" x 49" [122 x 122 x 125

cm]

(1) 48" x 48" x 49" [122 x 122 x 125

cm]

(1) 69" x 48" x 60" [175 x 122 x 153

cm]

(1) 69" x 48" x 60" [175 x 122 x 153 cm]

(1) 54" x 51" x 58" [137 x 130 x 147 cm]

(1) 54" x 51" x 50" [137 x 130 x 127cm]

(1) 49" x 48" x 23" [124 x 122 x 58 cm]

(1) 49" x 45" x 23" [124 x 114 x 58 cm]

or ship UPS (in 2 boxes):

(1) 18" x 10" x 10" [46 x 25 x 25 cm]

(1) 40" x 20” x 12" [102 x 51 x 30 cm]

MADE IN U.S.A.

* 25 year limited warranty. Gas springs & rubber pallet tops covered for 3 years. ** All shipping weights and dimensions are for continental US shipping only. Call for other shipping specifications. Ex-works Bethlehem, PA. Shipping weights are approximate and may vary at time of ship-

ping. *** Max screen width is applicable when all heads have screens loaded. Larger screens will fit when the neighboring heads are empty. Max screen weight is the limiting factor when all screens are not

1 in = 2.54 cm 1 lb = 0.454 kg

V200HD

_Specs_0319

V-100 & V-1000 Technical Specifications V-100 Series V-1000 Series V100-11 V100-44 V1-T11 V1-T14 V1-44 V1-46 V1-66 V1-88 Warranty 1 Year 1 Year 3 year 3 year 3 year 3 year 3 year 3 year

Pallet Materials Steel Steel Steel w/ rubber tops Steel w/ rubber tops Steel w/ rubber tops Steel w/ rubber tops Steel w/ rubber tops Steel w/ rubber tops

Head Lifting Spring Extension Spring Extension Spring Extension Spring Extension Spring Extension Spring Extension Spring Extension Spring Extension Spring

All Heads Down via Floating Heads Floating Heads Floating Heads Floating Heads Floating Heads Floating Heads Floating Heads Floating Heads

Micro-registration N/A N/A Wrenchless Wrenchless Wrenchless Wrenchless Wrenchless Wrenchless

Leveling Basic Basic Basic Basic Basic Basic Basic Basic

Height legs to pallet N/A N/A N/A N/A 34.5" (88 cm) 34.5" (88 cm) 34.5" (88 cm) 34.5" (88 cm)

Height legs (w-wheels) to pallet N/A N/A N/A N/A 38.5" (98 cm) 38.5" (98 cm) 38.5" (98 cm) 38.5" (98 cm)

Diameter (Standard) 49" (125 cm) 71" (181 cm) 48" (122 cm) 75" (191 cm) 83" (211 cm) 94" (239 cm) 94" (239 cm) 102" (259 cm)

Diameter (Fully Extended) 56" (143 cm) 68" (219 cm) 55" (140 cm) 83" (211 cm) 95" (241 cm) 106" (269 cm) 110" (280 cm) 118" (300 cm)

23" (58 cm) 21” (53 cm) 25" (63.5 cm) 25" (63.5 cm) 25" (63.5 cm) 21" (53 cm) 21" (53 cm) 21" (53 cm)

Maximum Screen Width w/ optional side clamps N/A N/A N/A N/A N/A N/A N/A N/A

Max. Screen Weight 5.5 lbs (2.5 kg) 5.5 lbs (2.5 kg) 5.5 lbs (2.5 kg) 5.5 lbs (2.5 kg) 5.5 lbs (2.5 kg) 5.5 lbs (2.5 kg) 5.5 lbs (2.5 kg) 5.5 lbs (2.5 kg)

Max. Screen Weight w/ HD Head upgrades N/A N/A 26 lbs (11.8 kg) 26 lbs (11.8 kg) 26 lbs (11.8 kg) 26 lbs (11.8kg) 26 lbs (11.8kg) 26 lbs (11.8kg)

Maximum Standard Pallet size 16" x 20" (41 x 51 cm) 16" x 20" (41 x 51 cm) 20" x 24" (51 x 61 cm) 20" x 24" (51 x 61 cm) 20" x 24" (51 x 61 cm) 20" x 24" (51 x 61 cm) 20" x 24" (51 x 61 cm) 20" x 24" (51 x 61 cm)

Fits Through 33" (84 cm) Doorway Yes Yes Yes Yes Yes Yes Yes Yes

Unit Weight 67 lbs (30.4 kg) 120 lbs (54.5 kg) 54 lbs (24.5 kg) 88 lbs (40 kg) 256 lbs (116 kg) 308 lbs (140 kg) 369 lbs (167.4 kg) 850 lbs (386 kg)

Can Ship UPS Yes Yes Yes Yes No No No No

Shipping Weight** (UPS)

69 lbs. (31.2 kg) (UPS)

129 lbs. (58.6 kg) (UPS)

67 lbs (30.4 kg)

175 lbs (80 kg)

or (UPS) 111 lbs (50.4 kg)

375 lbs (170 kg) 400 lbs (181 kg) 410 lbs (186 kg) Call fo details

Shipping Dimensions** UPS (in 3 boxes):

(1) 25" x 25" x 7" [64 x 64 x 18 cm] (1) 19" x 17” x 7" [49 x 44 x 18 cm] (1) 13" x 13” x 7" [33 x 33 x 18 cm]

UPS (in 3 boxes):

(1) 25" x 25" x 7" [64 x 64 x 18 cm] (4) 19" x 17” x 7" [49 x 44 x 18 cm] (4) 13" x 13” x 7" [33 x 33 x 18 cm]

UPS (in 2 boxes):

(1) 49" x 13" x 13" [125 x 33 x 33 cm] (1) 19" x 17” x 7" [49 x 44 x 18 cm]

(1) 48" x 42" x 23" [122 x 107 x 59 cm]

UPS

(in 2 boxes): (1) 49" x 13" x 13" [125 x 33 x 33 cm] (1) 19" x 17” x 7" [49 x 44 x 18 cm]

(1) 48" x 45" x 30" [122 x 115 x 76 cm]

(1) 48" x 45" x 30" [122 x 115 x 76 cm]

(1) 48" x 45" x 30" [122 x 115 x 76 cm]

Call for details

MADE IN U.S.A.

* 25 year limited warranty. Gas springs & rubber pallet tops covered for 3 years. ** All shipping weights and dimensions are for continental US shipping only. Call for other shipping specifications. Ex-works Bethlehem, PA. Shipping weights are approximate and may vary at time of shipping. *** Max screen width is applicable when all heads have screens loaded. Larger screens will fit when the neighboring heads are empty. Max screen weight is the limiting factor when all screens are not loaded.

1 in = 2.54 cm 1 lb = 0.454 kg

V1000_Specs_0319

EconoRed & BigRed Technical Specifications ER-II-30 ER-II-54 ER-III-30 ER-III-54 BR4D-V30 BR4D-V54

Heater Warranty 15 Year 15 Year 15 Year 15 Year 15 Year 15 Year Defect Warranty 3 Year 3 Year 3 Year 3 Year 3 Year 3 Year Shirts / Hr* - (Plastisol) (Waterbased/Discharge)

300+ @ 25 secs. 100+ @ 70 secs.

600+ @ 25 secs. 200+ @ 70 secs.

450+ @ 25 secs. 150+ @ 70 secs.

900+ @ 25 secs. 300+ @ 70 secs.

475+ @ 25 secs. 216+ @ 50 secs.

950+ @ 25 secs. 432+ @ 50 secs.

Shirts/hr* - DTG/digital N/A N/A N/A N/A 72 @ 2.5 min. 60 @ 3 min. 30 @ 6 min.

144 @ 2.5 min. 120 @ 3 min. 60 @ 6 min.

Belt Speed 1.8-23 FPM (0.5-7 MPM)

1.8-23 FPM (0.5-7 MPM)

1.8-23.6 FPM (0.6-7.2 MPM)

1.8-23.6 FPM (0.6-7.2 MPM)

1.8-23.6 FPM (0.6-7.2 MPM)

1.8-23.6 FPM (0.6-7.2 MPM)

Exhaust (Free Air) 380 CFM (10.7 CMM)

380 CFM (10.7 CMM)

380 CFM (10.7 CMM)

550 CFM (15.6 CMM)

500 CFM (14.2 CMM)

700 CFM (19.8 CMM)

Exhaust Stack Diameter 8” (20.32 cm) 8” (20.32 cm) 8” (20.32 cm) 8” (20.32 cm) 6” (15.24 cm) 8” (20.32 cm) Overall Length 87" (221 cm) 87" (221 cm) 105” (267 cm) 105” (267 cm) 105” (267 cm) 105” (267 cm) Overall Width 45.2" (114.8 cm) 69.2" (175.8 cm) 45.2" (114.8 cm) 69.2" (175.8 cm) 47.3” (120.2 cm) 71.4” (181.4 cm) Overall Height 60.9" (154.7 cm) 60.9" (154.7 cm) 60.9" (154.7 cm) 60.9" (154.7 cm) 51.6” (131.1 cm) 51.6” (131.1 cm)

Belt Width 30" (76 cm) 54" (137 cm) 30" (76 cm) 54" (137 cm) 30" (76 cm) 54" (137 cm) Chamber Length 36" (91 cm) 36" (91 cm) 54” (137cm) 54” (137cm) 54” (137cm) 54” (137 cm) Chamber Infeed Width 34.5" (88 cm) 58.5" (149 cm) 34.5" (88 cm) 58.5" (149 cm) 34.5" (88 cm) 58.5" (149 cm) Chamber Infeed Height(adjustable)

2" - 7" (5 - 17.7 cm)

2" - 7" (5 - 17.7 cm)

2" - 7" (5 - 17.7 cm)

2" - 7" (5 - 17.7 cm)

2" - 7" (5 - 17.7 cm)

2" - 7" (5 - 17.7 cm)

Heat Range (@ Heater) 0-900 F° (0-482 C°) @ 240V

0-900 F° (0-482 C°) @ 240V

0-900 F° (0-482 C°) @ 240V

0-900 F° (0-482 C°) @ 240V

0-900F° (0-482C°) @ 240V 0-1150F° (621C°) - booster

0-900F° (0-482C°) @ 240V 0-1150F° (621C°) - booster

Heater Size & Standard Wattage

12" x 24" (30 x 61 cm) 2 @ 3,600 = 7,200 Watts

12" x 48" (30 x 122 cm) 2 @ 7,200 = 14,400 Watts

12" x 24" (30 x 61 cm) 3 @ 3,600 = 10,800 Watts

12" x 48" (30 x 122 cm) 3 @ 7,200 = 21,600 Watts

4 @ 12" x 24" (30 x 61 cm) Zone 1 @ 3,600 Watts Zone 2 @ 7,800 Watts

11,400 Watts Total

4 @ 12" x 48" (30 x 122 cm) Zone 1 @ 7,200 Watts Zone 2 @ 15,600, Watts

22,800 Watts Total

Cost / hour to operate based on 10 cents / kwh 72 cents $1.44 $1.08 $2.16 $1.14 $2.28

Electrical Specs** Chamber

240V / 32A / 1 Ph. / 3 wire 50/60HZ

240V / 64A / 1 Ph. / 3 wire 50/60HZ

240V / 50A / 1 Ph. / 3 wire 50/60 HZ

240V / 97A /1Ph. / 4 wire / 50/60 HZ

240V / 51A / 1 Ph. / 3 wire 50/60HZ

240V / 58A / 3 Ph. / 4 wire 50/60HZ

Electrical Connection All amps shown are FLA (Full Load Amps), not recommended line size! Dryers on this page must be hard wired to the power terminal provided. A licensed electrician must be consulted and should refer to articles, 210.20(a), 215.3 and 310 of the NEC code.

Optional Chamber Power Also available in 380 / 440 / 480

240V/ 19A / 3 Ph. / 4 wire / 50/60HZ

240V/ 37A / 3 Ph. / 4 wire / 50/60HZ

240V / 29A / 3Ph. / 4 wire / 50/60 HZ

240V / 55A / 3 Ph. / 4 wire 50/60HZ

240V / 32A / 3 Ph. / 4 wire 50/60HZ

240V / 98A / 1 Ph. / 3 wire 50/60HZ

Shipping Weight** 647 lbs (293 kg) 988 lbs (448 kg) 896 lbs (407 kg) 1,018 lbs (462 kg) 1,018 lbs (462 kg) 1,438 lbs (653 kg) Shipping Dimensions** 54" x 43" x 60"

(137 x 109 x 152 cm) 78" x 49" x 60"

(198 x 125 x 153 cm) 61" x 60" x 64"

(155 x 152 x 163 cm) 72" x 61" x 63"

(183 x 155 x 160 cm) 72" x 61" x 63"

(183 x 155 x 160 cm) 92" x 65" x 63"

(234 x 161 x 160 cm)

* Production speeds are estimates are based on 16” centers and will vary depending on ink manufacturer, humidity of shop, and other variables. **All shipping weights and dimensions are for continental US shipping only. Call for other shipping specifications. Ex-works from Bethlehem, PA.

D-1000

LR-X

1-30

LR-X

2-30

ER

-II-30

ER

-II-54

ER

-III-54

BR

4D-V

54

ER

-III-30

ER BR

Specs_0120

Dryer foot print comparison chart, shown to scale

Dryers depicted on this page

1 in = 2.54 cm 1 lb = 0.454 kg

D-100

ER

-II-30-2

LR-X

1-54

LR-X

2-54

D-100, D-1000, & LittleRed Technical Specifications D-100 D-1000 LR-X1-30 LR-X2-30 LR-X1-54 LR-X2-54 LR-X3-30 LR-X3-54 Heater Warranty 15 Year 15 Year 15 Year 15 Year 15 Year 15 Year 15 Year 15 Year Defect Warranty 3 Year 3 Year 3 Year 3 Year 3 Year 3 Year 3 Year 3 Year Shirts / Hr Plastisol

110+@ 25 secs. 110+@ 25 secs. 90+(120V)/130+(240V) @ 25 secs.

260+@ 25 secs. 260+@ 25 secs. 520+@ 25 secs. 360+@ 25 secs. 720+@ 25 secs.

Shirts/hr wb/discharge

50+@ 70 secs. 50+@ 70 secs. 45+@ 70 secs. 90+@ 70 secs.

90+@ 70 secs. 180+@ 70 secs. 120+@ 70 secs. 240+@ 70 secs.

Belt Speed 0.6-7.4 FPM (0.18-2.3 MPM)

0.6-7.4 FPM (0.18-2.3 MPM)

0.6-7.4 FPM (0.18-2.3 MPM)

1.4-17.7 FPM (0.4-5.4 MPM)

0.6-7.4 FPM (0.18-2.3 MPM)

1.4-17.7 FPM (0.4-5.4 MPM)

1.4-7.4 FPM (0.18-2.3 MPM)

1.4-7.4 FPM (0.18-2.3 MPM)

Exhaust (Free Air) n/a n/a 177 CFM (5 CMM) optional

177 CFM (5 CMM) 388 CFM (11 CMM) optional

388 CFM (11 CMM) 388 CFM (11 CMM) 550 CFM (15.6 CMM)

Exhaust Diameter n/a n/a 3” (7.62 cm) 3” (7.62 cm) 3” (7.62 cm) 4” (10.16 cm) 4” (10.16 cm) 4” (10.16 cm)

Overall Length 46" (117 cm) 46" (117 cm) 48" (122 cm) 84” (213 cm) 66” (168 cm) 84” ( 213 cm) 88” ( 224 cm) 88” ( 224 cm)

Overall Width 24" (61 cm) 32” (81 cm) 41” (105cm) 41" (105 cm) 65” (166 cm) 65” (166 cm) 41" (105 cm) 65" (166 cm)

Overall Height 24" (61 cm) 24" (61 cm) 48” (122cm) 50” (127 cm) 48” (122cm) 50” (127 cm) 50” (127 cm) 50” (127 cm)

Belt Width 18" (45.7 cm) 26" (66 cm) 30" (76 cm) 30" (76 cm) 54” (137cm) 54” (137cm) 30” (76cm) 54” (137cm)

Chamber Length 18" (45.7 cm) 18" (45.7 cm) 18” (46cm) 36”(92 cm) 18” (46cm) 36”(92 cm) 41”(104cm) 41”(104cm)

Chamber Infeed Width

19.5" (49.5 cm) 27.75” (70.5 cm) 33.5” (85cm) 33.5" (85 cm) 58.5" (149 cm) 58.5" (149 cm) 33.5" (85 cm) 58.5" (149 cm)

Chamber Infeed Height(adjustable)

2" - 7" (5 - 17.7 cm)

2" - 7" (5 - 17.7 cm)

2" - 7" (5 - 17.7 cm)

2" - 7" (5 - 17.7 cm)

2" - 7" (5 - 17.7 cm)

2" - 7" (5 - 17.7 cm)

2" - 7" (5 - 17.7 cm)

2" - 7" (5 - 17.7 cm)

Heat Range (@ Heater)

0-750 F° (0-399 C°) @ 120 or 240V

0-750 F° (0-399 C°) @ 120 or 240V

0-900F° (0-482C°) @ 240V 0-750F° (0-399C°) @ 120V

0-900 F° (0-482 C°) @ 240V

0-900 F° (0-482 C°) @ 240V

0-900 F° (0-482 C°) @ 240V

0-900 F° (0-482 C°) @ 240V

0-900F° (0-482C°) @ 240V

Heater Size 16"x16"(40.6x40.6 cm) 16"x20"(40.6x50.8 cm) 12" x 24" (30 x 61 cm) 12" x 24" (30 x 61 cm)

12" x 48" (30 x 122 cm) 12" x 48" (30 x 122 cm) 12" x 24" (30 x 61 cm) 12" x 48" (30 x 122 cm)

Total Wattage 1,625 Watts 2,025 Watts 240V / 1 @ 2,600 Watts 120V / 1 @ 2,000 Watts

2,600 = 5,200 Watts 5,200 Watts 10,400 Watts 7,800 Watts Total 15,600 Watts Total

Cost/hr to operate based on 10 cents/kwh

16 cents 20 cents 26 cents @ 240V 20 cents @ 120V

52 cents 52 cents $1.04 78 cents 1.56 cents


120V / 12.5A / NEMA 5-15P

240V / 6.5A / 1 Ph. / NEMA 6-15P

120V / 16.5A / NEMA 5-20P

240V / 8.2A / 1 Ph. / NEMA 6-15P

240V / 11A / 1 Ph. / NEMA 6-15P 120V / 16.5A/ NEMA 5-20P

240V / 21.6A / 1 Ph. / 3 wire 50/60HZ

240V / 22A / 1 Ph. / 3 wire 50/60HZ

240V / 44A / 1 Ph. / 3 wire 50/60HZ

240V / 34A / 1 Ph. / 3 wire 50/60HZ

240V / 68A / 1 Ph. / 3 wire 50/60HZ

Electrical Connection Cordset Included Cordset Included Cordset Included

All amps shown are FLA (Full Load Amps), not recommended line size! Dryers on this page must be hard wired to the power terminal provided.

A licensed electrician must be consulted and should refer to articles, 210.20(a), 215.3 and 310 of the NEC code. Optional Power 208V 208V 208V 208V 208V 380V

208V 380V 308V 308V

Unit Weight 89 lbs (41 kg) 114 lbs (52 kg) 172 lbs (78 kg) 304 lbs (138 kg) 380 lbs (173 kg) 480 lbs (218 kg) 424 lbs (193 kg) Call for details

Shipping Weight** Box 1 - 57 lbs (26 kg) Box 2 - 16 lbs (7.3 kg) Box 3 - 21 lbs (9.6 kg)

Boxes on skid - 115 lbs (52 kg)

Box 1 - 17 lbs (7.7 kg) Box 2 - 24 lbs (10.9 kg) Box 3 - 35 lbs (15.9 kg) Box 4 - 43 lbs (19.5 kg) Boxes on Skid—215 lbs

(97.5 kg)

300 lbs (136 kg) 495 lbs (225 kg) 550 lbs (250 kg) 638 lbs (290 kg) 548 lbs (249 kg) 828 lbs (376 kg)

Shipping Dimensions**

Box #1 - 51.5x25x8” (131x64x20

cm) Box #2 -

21x21x7” (53x53x18 cm) Box #3 -

25x18x6” (64x46x15 cm) On Skid -

52x26x22” (132x96x51cm)

Box #1 - 27x21x7” (69x54x18 cm)

Box #2 - 31x21x9” (79x54x23 cm)

Box #3 - 36x31x8” (92x79x21 cm)

Box #4 - 36x31x8” (92x79x21 cm)

On Skid - 49"x37"x26" (125x94x66 cm)

25" x 48" x 35" (64 x 122 x 89 cm)

50” x 48” x 40” (127 x 122 x 102 cm)

70” x 42” x 58” (178 x 107 x 148 cm)

70” x 42” x 58” (178 x 107 x 148 cm)

49” x 45” x 56” (125 x 115 x 143 cm)

69” x 49” x 58” (176 x 125 x 148 cm)

* Production speeds are estimates are based on 16” centers and will vary depending on ink manufacturer, humidity of shop, and other variables. **All shipping weights and dimensions are for continental US shipping only. Call for other shipping specifications. Ex-works from Bethlehem, PA.

LR_D

-SERIES_0120

1 in = 2.54 cm 1 lb = 0.454 kg

LR-X1D-18 LR-X1D-30 LR-X2D-30 LR-X3D-30 LR-X3D-30-2 LR-X3D-54 LR-X3D-54-2 LR-X3D-78 Heater Warranty 15 Year 15 Year 15 Year 15 Year 15 Year 15 Year 15 Year 15 Year Defect Warranty 3 Year 3 Year 3 Year 3 Year 3 Year 3 Year 3 Year 3 Year Shirts/hr Plastisol @ 25 secs

162+ 162+ 240+ 360+ 720+ 720+ 1,440+ 1,080+

Shirts/hr wb/discharge @50 secs

81+ 81+ 122+ 185+ 370+ 370+ 720+ 555+

Shirts/hr DTG/digital

34 @ 2 min. 27 @ 2.5 min. 23 @ 3 min.

34 @ 2 min. 27 @ 2.5 min. 23 @ 3 min.

51 @ 2 min. 40 @ 2.5 min. 34 @ 3 min.

77 @ 2 min. 61 @ 2.5 min. 51 @ 3 min.

144 @ 2 min. 122 @ 2.5 min. 102 @ 3 min. 51 @ 6 min

154 @ 2 min. 123 @ 2.5 min. 103 @ 3 min.

308 @ 2 min. 226 @ 2.5 min. 206 @ 3 min. 102 @ 6 min

231 @ 2 min. 185 @ 2.5 min. 155 @ 3 min.

Belt Speed 0.7-9.3 FPM*

(0.2-2.8 MPM) 0.7-9.3 FPM* (0.2-2.8 MPM)

0.7-9.3 FPM* (0.2-2.8 MPM)

0.7-9.3 FPM* (0.2-2.8 MPM)

0.7-9.3 FPM* (0.2-2.8 MPM)

0.7-9.3 FPM* (0.2-2.8 MPM)

0.7-9.3 FPM* (0.2-2.8 MPM)

0.7-9.3 FPM* (0.2-2.8 MPM)

Belt Motor Torque 100 in-lb 100 in-lb 100 in-lb 100 in-lb 100 in-lb 100 in-lb 100 in-lb 100 in-lb

Exhaust (Free Air) 177 CFM (5 CMM) 177 CFM (5 CMM) 177 CFM (5 CMM) 388 CFM (11 CMM) 776 CFM (22 CMM) 550 CFM (15.6 CMM) 1,100 CFM (31.2 CMM)

1,100 CFM (31.2 CMM)

Exhaust Diameter 3” (7.62 cm) 3” (7.62 cm) 3” (7.62 cm) 4” (10.16 cm) 4” (10.16 cm) 6” (15.24 cm) 6” (15.24 cm) 2 @ 6” (15.24 cm) Overall Length 48” (122 cm) 48” (122 cm) 66” (168 cm) 88” (224 cm) 142” (361 cm) 88” ( 224 cm) 142” (361 cm) 102” (260 cm)

Overall Width 30” (76 cm) 41" (105 cm) 41" (105 cm) 41" (105 cm) 41" (105 cm) 65" (166 cm) 65" (166 cm) 89” (226 cm)

Overall Height 50” (127 cm) 50” (127 cm) 50” (127 cm) 50” (127 cm) 50” (127 cm) 50” (127 cm) 50” (127 cm) 54” (137 cm) Belt Width 18” (46 cm) 30” (76cm) 30” (76cm) 30” (76cm) 30” (76cm) 54” (137cm) 54” (137cm) 78” (198 cm)

Chamber Length 18” (46 cm) 18” (46 cm) 27”(69cm) 41”(104cm) 82” (210cm) 41”(104cm) 82” (210cm) 41”(104cm)

Chamber Infeed Width 21” (53 cm) 33.5" (85 cm) 33.5" (85 cm) 33.5" (85 cm) 33.5" (85 cm) 57.5" (146 cm) 57.5" (146 cm) 81.5” (207 cm)

Chamber Infeed Height(adjustable)

2" - 7" (5 - 17.7 cm)

2" - 7" (5 - 17.7 cm)

2" - 7" (5 - 17.7 cm)

2" - 7" (5 - 17.7 cm)

2" - 7" (5 - 17.7 cm)

2" - 7" (5 - 17.7 cm)

2" - 7" (5 - 17.7 cm)

2" - 7" (5 - 17.7 cm)

Heat Range @ Heater (at spec voltage)

0-900F° (0-482C°) @ 240V 0-1150F° (621C°) - booster

0-800F° (0-427C°) @ 240V 0-900F° (482C°) - booster

0-900F° (0-482C°) @ 240V 0-1150F° (621C°) - booster

0-900F° (0-482C°) @ 240V 0-1150F° (621C°) - booster

0-900F° (0-482C°) @ 240V 0-1150F° (621C°) - booster

0-900F° (0-482C°) @ 240V 0-1150F° (621C°) - booster

0-900F° (0-482C°) @ 240V 0-1150F° (621C°) - booster

0-900F° (0-482C°) @ 240V 0-1150F° (621C°) - booster

Heater Size 16” x 18” (40 x 45 cm) 16” x 24” (40 x 61 cm) 12" x 24" (30 x 61 cm) 12" x 24" (30 x 61 cm) 12" x 24" (30 x 61 cm) 12" x 48" (30 x 122 cm) 12" x 48" (30 x 122 cm) 12" x 72" (30 x 183 cm)

Total Wattage 2,280 Watts Total 4,050 Watts Total 6,300 Watts Total 8,900 Watts Total 16,700 Watts Total 17,800 Watts Total 33,400 Watts Total 26,700 Watts Total

Cost/hr to operate based on 10 cents/kwh

23 cents 41 cents 63 cents 89 cents $1.67 $1.78 $3.34 $2.67


240V / 12.5A / 1 Ph. / NEMA 6-15P

240V / 16A / 1 Ph. / NEMA 6-20P

240V / 27A / 1 Ph. / 3 wire 50/60HZ

240V / 38A / 1 Ph. / 3 wire 50/60HZ

240V / 72A / 1 Ph. / 3 wire 50/60HZ

240V / 78A / 1 Ph. / 3 wire 50/60HZ

or 240V / 45A / 3 Ph. /

4 wire 50/60HZ

240V / 126A / 1 Ph. / 3 wire 50/60HZ

or 240V / 85A / 3 Ph. /

4 wire 50/60HZ

240V / 68A / 3 Ph. / 4 wire 50/60HZ

1 Ph. N/A

Electrical Connection Cordset Included Cordset Included

All amps shown are FLA (Full Load Amps), not recommended line size! Dryers on this page must be hard wired to the power terminal provided.

A licensed electrician must be consulted and should refer to articles, 210.20(a), 215.3 and 310 of the NEC code. Optional Power Also available in 208 / 380

Unit Weight 172 lbs (78 kg) 220 lbs (100 kg) 304 lbs (137.9 kb) 424 lbs (193 kg) Call for details 636 lbs (289 kg) Call for details 850 lbs (385.6 kg)

*0.3-2.9 FPM (0.1-0.9 MPM) with optional creeper gear

LR-XD

_Specs_0120

LittleRed dryers can be customized to meet just about any application or production needs. Shown above is a 3 chamber LittleRed X3-D with additional conveyor extensions for longer infeed.

LittleRed XD Series Technical Specifications

Flash Cure Units

*If extension cord is required, consult a licensed electrician. **All shipping weights and dimensions are for continental US shipping only. Call for other shipping specifications.

All_Flash_Tech_Sheet_0718

1 in = 2.54 cm 1 lb = 0.454 kg

Technical Specifications F-100 F-1000 REDFLASH AIR-FLASH Models F-100 F-1000 R-18-240 R-1824-240 RA-18-HO RA-1824

Heater Warranty 15 Year 15 Year 15 Year 15 Year 15 Year 15 Year

Bumper to Bumper Warranty 3 Year 3 Year 3 Year 3 Year 3 Year 3 Year

Heater Size 16” x 16” (41 x 41 cm)

18" x 18" (46 x 46 cm)

18" x 18" (46 x 46 cm)

18" x 24" (46 x 61 cm)

18" x 18" (46 x 46 cm)

18" x 24" (46 x 61 cm)

Unit Warm Up Time 15 min. (120V) or 10 min. (240V)

20 min. (120V) or 10 min (240V) 6 min. 12 min. 6–10 min 6-10 min

Heater Wattage 1625 Watt Heater 1950 or 2600 Watt Heater 2600 or 3500 Watt

Heater 3500 Watt Heater 3500 Watt Heater 4300 Watt Heater

Electrical Specs* / included plug (Some models require a dedicated line. 50/60 HZ for all units.)

120V/13A/1625W NEMA 5-15P

240V/6.5A/1625W

NEMA 6-15-P

120V/15.6/1950W NEMA 5-20P

240V/11/2600W NEMA 6-15-P

240V/9A/2600W NEMA 6-15P

240V/16A/3500W

NEMA 6-20P

240V/16A/3500W/ NEMA 6-20P Plug

240V/16A/2500W NEMA 6-10P

240V/19A/4300W/ NEMA L6-30P

Electrical Specs - AutoFlash / included plug

110-125V/1A/NEMA 5-15P

220-240V/1A/NEMA 6-15P

Weight** Dimensions** F-100 (Head and Stand) 39 lbs (18 kg) 23” x 28” x 9” (58 x 71 x 22.9 cm)

F-1000 (Head and Stand) 42 lbs (19 kg) 23” x 28” x 9” (58 x 71 x 22.9 cm)

R-18-240 (Head Only) 35 lbs (16 kg) 26" x 29" x 7" (66 x 74 x 18 cm)

R-1824-240 (Head Only) 43 lbs (19.5 kg) 26" x 35" x 8" (66 x 90 x 20 cm)

RA-18-HO (Head Only) 64 lbs (29 kg) 29” x 26” x 15” (74 x 66 x 38 cm)

RA-1824 (Head Only) 74 lbs (35.5 kg) 35” x 29” x 15” (89 x 74 x 38 cm)

AF-120/AF-240 AutoFlash kit 51 lbs (25 kg) 31" x 22" x 14" (79 x 56 x 36 cm)

SH-STAND-WS Standard Stand for Manual Flash 22 lbs (10 kg) 37" x 7" x 3" (94 x 18 x 8 cm)

SHHD-STAND-M Heavy Duty Stand for Manual Flash 42 lbs (19kg) 30” x 14” x 7” (76 x 35.5 x 18 cm)

SH-LEGS-AF Standard Stand for AutoFlash 15 lbs (7 kg) 37" x 7" x 3" (94 x 18 x 8 cm)

SHHD-STAND Heavy Duty Stand for AutoFlash 39 lbs (18 kg) 30” x 15” x 11” (76 x 38 x 28 cm)

Shipping Weights and Dimensions

All_Exposers&Drying_C

abinets_0319 Exposing Units Technical Specifications

*All shipping weights and dimensions are for continental US shipping only. Call for other shipping specifications. Ex-works from Bethlehem, PA.

Dri-Vault - Drying Cabinets Dri-Cab VDC-253610 VDC-2536-24 VDC-513610 VDC-2331 Defect Warranty 3 Year 3 Year 3 Year 3 Year

Maximum # of Screens 10 @ maximum size 24 @ maximum size (10) @ 51” x 36” / (20) @ 25” x 36” 10 @ maximum size Maximum Screen Size 25" x 36" x 1.625"

(63.5 x 91.4 x 4.12 cm) 25" x 36" x 1.625"

(63.5 x 91.4 x 5.7 cm) (10 screens) @ 51” x 36” (20 screens) @ 25” x 36”

23” x 31” x 1.625” (58.4 x 78.7 x 4.12 cm)

Smallest Screen Width 18" (46 cm) 18" (46 cm) No minimum due to adjustable center tree 16" (46 cm)

Blower (Free Air) 177 CFM (5 cmm)120v or 290 CFM (8.2cmm) 240volt

580 CFM (16.4 CMM) 290 CFM (8.2 CMM) 113 CFM (3.2 CMM)

Overall Depth x Width x Height 39.5" x 34.75" x 32" 39.5" x 34.75" x 81" 37.9” x 62.5” x 32.3” 36” x 26” x 32” (91 x 66 x 81 cm)

Heater Wattage 1,250 Watts 120 Volts or 1,550 Watts 240 Volts

3,100 Watts 240 Volts

1,550 Watts @ 240 Volts N/A

Power & Plug Spec International Available

120V / 10A / 1 Ph. / 60 HZ / NEMA 5-15P plug

or 240V / 6A / 1 Ph. / 50/60 HZ /

NEMA 6-15P plug

240V / 16A / 1 Ph. / 50/60 HZ / NEMA 6-20P plug

240V / 6A / 1 Ph. / 50/60 HZ / NEMA 6-15P plug

120V / 1A / 1 Ph. / 60 HZ / NEMA 5-15P plug

or 240V / 1A / 1 Ph. / 50/60 HZ /

NEMA 6-15P plug

Shipping Weight (Assembled)* 367 lbs (166.5 kg) 670 lbs (303 kg) 573 lbs (277 kg) 212 lbs (55.3 kg)

Shipping Dimensions (Assembled)*

43" x 43" x 48" (109 x 109 x 122 cm)

43" x 43" x 84" (109 x 109 x 213 cm)

69” x 48” x 48” (175.3 x 122 x 122 cm)

43" x 35" x 40" (110 x 89 x 102 cm)

Shipping Weight (Unassembled)* Box # 1 - 121 lbs (55 kg) Box # 2 - 15 lbs (6.8 kg)

N/A N/A N/A

Shipping Dimensions (Unassembled)* Box # 1 - 43” x 29” x 9” (110 x 74 x 23 cm) Box # 2 - 34” x 29” x 8” (87 x 74 x 21 cm)

N/A N/A N/A

MADE IN U.S.A.

1 in = 2.54 cm 1 lb = 0.454 kg

Drying Cabinets Technical Specifications

MADE IN U.S.A.

E200-2128 (LED)

E100-2128 (Fluorescent) E200-2331 (LED)



E1-5236 (Fluorescent) E2-CTS-2536 (LED)

Overall Warranty 3 Year 3 Year 3 Year 3 Year 3 Year Light Bar Warranty (LED only) 5 Year 5 Year 5 Year 5 Year 5 Year Maximum Screen Size 21" x 28" (53 x 71 cm) 23" x 31" (58 x 78 cm) 25" x 36" (63 x 91 cm)

52" x 36" (132 x 91 cm)

or (2) 25” x 36” (63 x 91 cm) 25" x 37” (63 x 94 cm)

Image Area 15" x 18" (38 x 45 cm) 16" x 33" (58 x 83 cm) E2 - 24" x 36" (61 x 91 cm) E1 - 18" x 27" (45 x 68 cm)

E2 - 46" x 36" (116 x 91 cm) E1 - 47" x 27" (119 x 68 cm)

18.5” x 30” (47 x 76 cm)

Bulbs (LED)

Qty. (3) 18” (61 cm) LED light bars





Bulbs (Fluorescent)

Qty. (4) 20 watt T12-BL, black UV

Qty. (6) 40 watt F28T12\BLHO, Black UV

fluorescent 28" (71cm) long

Qty. (6) 47 watt F7761T2\BLC, Black UV

fluorescent 30.5" (78cm) long

Qty. (14) 47 watt F7761T2\BLC, Black UV

fluorescent 30.5" (78cm) long

N/A

Vacuum Pump, Oil-less Diaphragm

1/16 HP 24 hg Max

1/16 HP 24 hg Max

1/4 HP High Output 23 Hg Max

1/4 HP High Output 23 Hg Max

N/A

Power & Plug Spec International Available

120V 3.5A NEMA 5-15P plug

240V 2A NEMA 6-15P plug

120V / 60 HZ / 3.5A NEMA 5-15P

240V / 50/60 HZ / 2A NEMA 6-15P

120V / 60 HZ / 3.5A (E2-2536) 120V / 60 HZ / 3.5A (E1-2536)

NEMA 5-15P 240V / 50/60 HZ / 2A

NEMA 6-15P

120V / 60 HZ / 6.5A (E2-5236) 120V / 60 HZ / 8A (E1-5236)

NEMA 5-15P 240V / 50/60 HZ / 4A

NEMA 6-15P

120V / 60 HZ / 3A NEMA 5-15P

240V / 50/60 HZ / 1.5A NEMA 6-15P

Overall Depth x Width x Height

Lid Closed 35.75" x 34.75" x 14"

(83 x 88 x 36 cm) Lid Open

35.75" x 34.75" x 28" (83 x 88 x 71 cm)

Lid Closed 41.6 x 36.2 x 17"

(105.7 x 92 x 44 cm) Lid Open

41.6 x 36.2 x 32" (105.7 x 92 x 82 cm)

Lid Closed 38.3” x 49.3” x 44.5”

(97.3 x 125.3 x 113.1 cm) Lid Open

38.3” x 49.3” x 73.7” (97.3 x 125.3 x 187.3 cm)

Lid Closed 65.3” x 49.3” x 44.5”

(165.8 x 125.3 x 113.1 cm) Lid Open

65.3” x 49.3” x 73.7” (165.8 x 125.3 x 187.3 cm)

20.5” x 31.6” x 56.4” (52.1 x 80.4 x 43.2cm)

Overall Weight - Uncrated 100 lbs (45.4 kg) 180 lbs (81.6 kg) Call for details Call for details 142.5 lbs (64.6 kg)

Shipping Weight* 223 lbs (101 kg) w/ Utility Cart (UC-1000)

483 lbs (219 kg)

386 lbs (175 kg) w/ drying cabinet VDC253610

570 lbs (259 kg)


579 lbs (263 kg)


851 lbs (386 kg)

230 lbs (104.3 kg)

Shipping Dimensions*

43" x 43" x 17" (109 x 109 x 43 cm)

w/ Utility Cart (UC-1000) 43" x 43" x 35"

(109 x 109 x 89 cm)

48" x 45" x 20" (122 x114.3 x 51 cm)

w/ drying cabinet VDC253610 49” x 45” x 38”

(124 x 114 x 97 cm)

49" x 45" x 49" (125 x 114 x 125 cm)

w/ drying cabinet VDC253610 49” x 45” x 49”

(125 x 114 x 125 cm)

69" x 49" x 49" (175 x 125 x 125 cm)

w/ drying cabinet VDC253610 69" x 49" x 49"

(175 x 125 x 125 cm)

25" x 36" x 63" (63.5 x 91.4 x 160 cm)

Thank you for your interest in our products.Our warranty says it all!

Vastex International Inc.7 Emery St.

Bethlehem, PA 18015United States of America

1.800.482.7839 or +1.610.625.2702fax: +1.610.625.2775

www.vastex.com

Documents

Quality Products Comprehensive Training Outstanding ...Bracket for DIY Pallets Pallet arm not included. Pallet Arms: V-2000: V2-ARM V-1000: V1-ARM With 2.5” x 1.5” rotor arms