Quality Quality is the highest priority. CHIKO has developed a cost effective economical solution without compromising on quality, materials or finish. CHIKO products are manufactured with (AL 6005-T5} aluminum and (SUS304) stainless steel. Anodizing is done pre cut. All CHIKO products are cut and fabricated priorto final coating such as :Anodization, Powder Coating and Electrolysis with a finish thickness between 12 - 15 microns. CHIKO products feature a 10 year limited warranty (please refer to warranty documentation for moredetails). World Leading Manufacture

We are proud of the fact that more than 1.5GW solar projeet from worldwide used CHIKO mounting systems.

• UL Listed 1703 - Steep and low slope Type 1 & 2 Class A fire Classification,• Inertek for - Grounding & Bonding (UL 2703/UL-467) identified with ETL Listed Mark

Compliance report for CHIKO Rail System by Sunstrong Engineering.

• Aluminum 6005• UL 1703, UL 2703• Integrated and simplified grounding• Complete roof attachment kits• Code compliant across the US,• Fast and precise installation with pre-assembled and minimum quantity of components

Features:

Product Detail:

COMPOSITION SHINGLE STANDOFF MOUNT FLAT TILE MOUNT SPANISH TILE MOUNT

CHIKO Solar has obtained product certifications, and management system endorsement granted and approved by leading testing agencies including Intertek, ETCL Intertek, UL, UL1703, UL2 703, Intertek, SPAD etc.

With CHIKO, you will meet leading highest standard quality. All of our Aluminum profiles are made 6005 T5 with surface protection anodic oxidation 12-15 micron (μ), hooks and bolts are made of Stai lness steel 304.

Pitched & Flat Roofing Mounting Systems

Rail and Clamps

Tilts, Grounding and Accesories

Composition ShingleAvailable in the economy or the

SMART edition, this kit provides a three-part waterproofing system that

will mount your system.

Standoffs

Available in 3” or 6”, and 9" raise your modules to a higher standard.

RailMade from 6005 Aluminum, these rails are the backbone of the system. Available in Mill, Clear Anodized or Black Anodized.

Roof Attachments

Adjustable Tilt Legs These legs can adjust your

tilt to 10-60 degrees. Works easily with our system.

Integrated GroiundingMid Clamps

Our Mid Clamps not only mount two adjacent modules, but also have integrated grounding from both

modules to the rails.

Grounding-LugsRail & Panel

Complete the grounding with these clips.

Microinverter & Optimizer Attachments

Mount and ground the microinverter or optimizers

quickly.

Wire ClipsAvailable in Stainless Steel or Black Plastic for all your wire management

needs.

Integrated GroudingEnd Clamps

We can provide either Grounding End Clamps or Universal End clamps for your

solar needs.

Tile Hooks; Flat and Curved Tile; Sub Flashings

Available for Flat or Spanish Tile, these hooks mount to rafters without the need to drill into the tile.; Flat Tile and Spanish Tile Sub Flashings

Grounding Splice BarOur splice bars splice two

rails together and continue the grounding for an easier installation.

Pitched & Flat Roofing Mounting Systems

Composition L Foot Kit

CHIKO Composition L Foot Kit comes with fully anodized flashing, L Foot with UV Outdoor rated silicon washer, rail attachment 3/8" T-Bolt and SUS lag bolt for rafter installation. OneCHIKO composition L Foot Kits are sleek, fully UL Listed and some of the most affordable comp shingle roof solutions on the market.

Features

■ Made of AL 6005-T5■ Waterproof UV rated silicon washer■ Fast and easy to install■ Full anodized■ 12" x 9" Flashing

Standoff Kit

CHIKO Standoff Kits come with a clear anodized flashing, stanchion, cap, base, UV-rated silicone base seal, base attachment, 2 stainless steel lag bolts, aluminum L Foot and rail attachment T Bolts

Features

■ Made of AL 6005-TS■ Waterproof UV rated silicon washer■ Fast and easy to install■ Fully anodized ■ Large Flashing 12" x 12" "H�EMLl.NK■ Available in Clear & Black �U�U I j

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! POLYMER INl'-IJVATlON

4" E-CURB Compatible

Adjustable S Tile Hook

CHIKO Adjustable S Tile hook is designed to be adjustable in height to clear various sizes of spanish tiles. Elongated base allows lateral movement to ensure lag bolts hit the center of the rafter every time.

Features

■ Made of SUS 304■ Fits all curved tiles■ Long base plate fox maximum flexibility■ Corrosion resistence surface■ Pre-asumbled

1

Flat Tile Hook

CHIKO Flat Tile Hook allows an easy roofmounting solution for flat or concrete tile roofswithout the need to augment or alter tiles. TheHook is attached to the rafters with two lag boltsand the rail attaches directly to the hook for aneasy, low profile installation.

Features

■ Made of SUS 304

■ Fits flat concrete tiles■ Easy to install ■ Corrosion resistence surface ■ No alteration required to roofing material

----�f

Series 7 Rail

Features

Dimensions and Finish

■ 126"/10.5 Feet Aluminum AL 6005-TS Black Anodized■ 165"/ 13.8 Feet Aluminum AL 6005-TS Black Anodized

Also available in Silver/Mill Color

The CHIKO Rail is engineered for. strength and versatility. It's slotted attachment points allow for easy installation using CHIKO tilt-in T-Bolt rail attachment. Lose some of your t-bolts? Simply use any 3/8" hex bolt so you can continue your installation without waiting for proprietary hardware. This rail features a wire management chamber in front.

Features

■ Made with High Quality Aluminum AL 6005-TS

■ Engineered for up to 6 foot spans■ Wire management chamber

Weight

6.28 lbs8.3 lbs

Features·Application: Commercial & Residential·Max Wind Load: 60m/s·PV Module: Framed or Unframed·Module Orientation: Portrait·Fixed Tilt Angle: 15°, 20°, 30°·Material: Anodized Aluminium 6005-T5

Product Advantages·Folding·Easy installation·Light weight·Cost-effective

GROUND MOUNT

Ballast I-2 Flat Roof MountChiko Solar Ballast I Systems is an universal mounting system to serve virtually any commercial flat roofs. The system is designed to provide the durability and flexibility solutions that is quick to install and is light on the roof.

Material: Aluminum 6005-T5, Stainless steel 304Tilt Inclination: 15°, 20°, 30°Module Orientation: Landscape Max Wind Load: 60m/sPre-assembled and Folded ballast console

Features

Ballast Console BTI-2 End PlateMid Clamp End Clamp

Ballast Profile - Concret Carrier Concrete Block Rear PlateBallast Profile

Main Components:

BALLAST FLAT ROOF MOUNT

Integrated Grounding Splice Kit

CHIKO splice kits are available in clear or black anodized finish. Integrated grounding hardware makes jumpers unnecessary, only one I LSCO SGB4 grounding lug is necessary for full rail segments, even those with multiple segments spliced together.

Features

■ Made with High Quality 6005-TSAluminum■ Super Easy Installation, Just slide in■ Integrated Grounding & Bonding UL 2703

Integrated Grounding [Adjustable, or Fixed] Mid Clamp

CHIKO Mid Clamps will fit any panel framesize from 30mm to 45mm frame. Spring loaded plastic channel stand allows a quick and easy installation.

/

Features

■ Made with High Quality 6005-TS Aluminum■ Super Easy Installation, Tilt-in■ Integrated Grounding & Bonding UL 2703

Integrated Grounding [Adjustable, or Fixed] End Clamp

CHIKO End Clamps will fit any panel framesize from 30mm - 45mm frame. No assembly or accessories required.

Features ■ Made with High Quality 6005-TS Aluminum■ Super Easy Installation, Tilt-in■ Integrated Grounding & Bonding UL 2703

L - Foot

Module Wire Clips 4mm

Stainless Steel Zip Tie

CHIKO L feet have been widely used on universal corrugated metal roofing. It can fix to the roof rafter directly, applied with hanger bolts or fitted with CHIKO designing roof clamps.

CHIKO 4mm Wire Clip is design to clip Module wires to their frame for a clean install.

Features

■ Made with High Quality Stainless Steel■ Super Easy Installation.

CHIKO Stainless Steel Zip Ties are available in 6 different sizes 250mm and350mm

Features

■ Made with High Quality Stainless Steel■ Super Easy Installation.

Features

Enable fast, simple and cost-effective installation Al6005-T5. High class anodized aluminium Waterproof Silicone rubber intergrated Fasteners and rail nut configured fully, to save installation time and purchasing extra parts

Integrated Grounding Micro Bolt

Adjustable Front Tilt Kit

Adjustable Back Tilt Legs

CHIKO integrated grounding and bonding Micro Bolt has been tested by UL for grounding and bonding of Microinverters and Solaredge Optimizers.

Features

■ Made with High Quality SUS304■ Super Easy Installation, Just slide in■ Integrated Grounding & Bonding UL 2703

CHIKO Adjustable Tilt kit is an accessory compatible with any CHIKO roof mount usedproviding an angled rail installation. Use with conjunction with CHIKO Tilt legs or use with CHIKO Standoff kits as a standalone tiltsolution.

Features

■ Made with High Quality 6005-T5Aluminum■ Super Easy Installation, Tilt-in■ Provides perfect Tilt.

CHIKO Adjusatble Back Tilt Legs are available in three sizes to achieve a module tilt of 10 to 45 degrees. The bottom adjustable L-Foot attaches to CHIKO standoffs or other roofmount types, while the top adjustable L­Foot adjusts your rail angle.

Features

■ Made with High Quality 6005-T5 Aluminum■ Super Easy Installation, Tilt-in■Available in 10°-15°, 15°-30°, 30°-45°

Grounding Lugs

Complete Grounding with these Integrated Lugs

Features

■ Made with High Quality SUS304■ Super Easy Installation, Just slide in■ Integrated Grounding & Bonding UL 2703

Class A Fire Rating:

TM

BACKGROUNDAll roofing products are tested and classified for their ability to resist fire.Recently these fire resistance standards were expanded to include solar equipment as part of the roof system. Specifically, this requires the modules, mounting hardware and roof covering to be tested together as a system to ensure they achieve the same fire rating as the original roof covering.Adoption of these new requirements began in California at the beginning of Year 2015

The objective is to ensure that the PV system does not adversely affect the fire rating of the roof. Roof sur-face fire ratings are classified either A, B, or C; Class A being the most resistant to the spread of flame. Since the physical characteristics of the PV module (material, thickness of glass, etc) also potentially affect how a fire will act, modules are now tested and assigned a “type” based upon these characteristics and spread of flame test results.

CHIKO CERTIFICATIONChiko received a Class A Fire Rating – the highest possible fire rating – from UL, a nationally recognized test laboratory. Chiko Roof Mount Products were tested with Type 1 and Type 2 Solar Modules and given Class A Rated Roofing material in accordance with these new UL 1703 and UL 2703 test standards.

The testing evaluated the system’s ability to resist flame spread, burning material and structural damage to the roof.

CERTIFICATION BELOW:

�

�

Warranty�Chiko�Solar�Mounting�Systems�

�Chiko� Solar� Industry� Co.,� Ltd.� warrants� to� the� original� purchaser� ("Purchaser")� of� product(s)� that� it�

manufactures� ("Product")� at� the� original� installation� site� that� the� Product� shall� be� free� from� defects� in�

material�and�workmanship�for�a�period�of�ten�(10)�years,�except�for�the�anodised�finish,�which�finish�shall�be�

free�from�visible�peeling,�or�cracking�or�chalking�under�normal�atmospheric�conditions�for�a�period�of�five�(5)�

years,� from� the� earlier� of� 1)� the� date� the� installation� of� the� Product� is� completed,� or� 2)� 30� days� after� the�

purchase�of�the�Product�by�the�original�Purchaser�("Finish�Warranty").� �

The� Finish� Warranty� does� not� apply� to� any� foreign� residue� deposited� on� the� finish.� All� installations� in�

corrosive� atmospheric� conditions� are� excluded.� The� Finish� Warranty� is� VOID� if� the� practices� specified� by�

AAMA� 609� &� 610-02� –� "Cleaning� and� Maintenance� for� Architecturally� Finished� Aluminum"�

(www.aamanet.org)�are�not�followed�by�Purchaser.�This�Warranty�does�not�cover�damage�to�the�Product�that�

occurs�during�its�shipment,�storage,�or�installation.� �

This�Warranty�shall�be�VOID�if�installation�of�the�Product�is�not�performed�in�accordance�with�Chiko�Solar’s�

written�installation�instructions,�or�if�the�Product�has�been�modified,�repaired,�or�reworked�in�a�manner�not�

previously�authorized�by�Chiko�Solar�IN�WRITING,�or�if�the�Product�is�installed�in�an�environment�for�which�it�

was�not�designed.�Chiko�Solar�shall�not�be�liable�for�consequential,�contingent�or�incidental�damages�arising�

out�of�the�use�of�the�Product�by�Purchaser�under�any�circumstances.� �

If�within�the�specified�Warranty�periods�the�Product�shall�be�reasonably�proven�to�be�defective,�then�Chiko�

Solar�shall�repair�or�replace�the�defective�Product,�or�any�part�thereof,�at�Chiko�Solar's�sole�discretion.�Such�

repair�or�replacement�shall�completely�satisfy�and�discharge�all�of�Chiko�Solar's�liability�with�respect�to�this�

limited� Warranty.� Under� no� circumstances� shall� Chiko� Solar� be� liable� for� special,� indirect� or� consequential�

damages�arising�out�of�or�related�to�use�by�Purchaser�of�the�Product.� �

Manufacturers�of�related�items,�such�as�PV�modules�and�flashings,�may�provide�written�warranties�of�their�

own.�Chiko�Solar's�limited�Warranty�covers�only�its�Product,�and�not�any�related�items.� �

�Add:�No.�801�Huabo�Rd.,�Jiading�District�Shanghai�China�Tel:�+86�21�5186�1626�Fax:�+86�21�5186�1626�E-mail:�chiko@chikolar.com� � www.chikolar.com�