Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
QUALITY ASSURED COMPANY AS/NZS ISO 9001:2008
REGN. Number 3465
Tel: (02) 9607 5774 | Fax: (02) 9607 5589 | Email: [email protected] | Web: www.roadrunnerparts.com.au
AAB-BB Side View AAB-BB Double
Our range of Flashing Arrow Signs are designed and built to comply with Australian Standards AS4192-2006. The A and B size panels have been tested and approved to NSW RTA Specification FAS/5. Our boards feature full aluminium cases for long life and light weight. All electronics are fully encapsulated for high vibration and moisture resistance. The electrical actuator simply plugs into the wiring loom, a switched circuit and plug is provided for beacons. The unit features one of the smallest controllers in the market, and the easiest installation.
Specifications Voltage : 12V or 24V Lens : Polycarbonate Board : Powder-coated aluminium Warranty : 2 years, 5 years (lamps only) Operating Temperature : -10°C to + 60°C Controller Harness : 15 metres Power Harness : 10 metres Light Source : LED (NATA Certified Lamp)
Features High intensity LED inserts certified to AS4192:2006. Simple wiring installation. Optional electric actuator available. Integrated actuator control & beacon switch. Compact controller with real-time display & audible lamp
failure alarm. Low current draw
Approvals RTA FAS/5 approvals; A Board: No.1005-FAS5-O1A B Board: No.1005-FAS5-O1B C Tick No. N24440 Complies to Australian Standards AS4192:2006
Includes When you order an ‘Australian Arrow Board’ it comes complete with: Sign Board Switch Panel Switch Panel Pedestal Bracket Fuse Box complete with Arrow Board and beacon
circuit Fuses Control cable 15M Power cable 10M Mounting bolts x 10
Tel: (02) 9607 5774 | Fax: (02) 9607 5589 | Email: [email protected] | Web: www.roadrunnerparts.com.au
No.1005-FAS5-O1A
A Board - 13 Lamp Part No. Description Voltage Max Current Draw (Amps) Weight (kg) AAB-AB Single sided board, controller & harnesses 12/24 2.1 16.6 AAB-AB-DBL Double sided board, controller & harnesses 12/24 4.2 18.7
No.1005-FAS5-O1B
B Board – 15 Lamp Part No. Description Voltage Max Current Draw (Amps) Weight (kg) AAB-BB Single sided board, controller & harnesses 12/24 2.5 21.6 AAB-BB-DBL Double sided board, controller & harnesses 12/24 5 25.3
C Board – 15/17 Lamp Part No. Description Voltage Max Current Draw (Amps) Weight (kg) AAB-CB Single sided board, controller & harnesses 12/24 2.5 55 Supplied with 2 separate lamps for optional installation to back of board.
Tel: (02) 9607 5774 | Fax: (02) 9607 5589 | Email: [email protected] | Web: www.roadrunnerparts.com.au
Example Images
OPERATING VOLTAGE12zv or 24V
MAXIMUM CURRENT DRAW1.85 Amps
Keypad
FAULT PROTECTIONIf communication between arrow and control unit is interrupted the arrow will operate in Hazard Mode. CONTROL UNIT LEDS flash fault sequence.
SUPPLIED WITHControl unit, operator’s manual, cables,fuse and fuse holder.
LEFT ARROW
BOTH ARROWS
HAZARD MODE
RIGHT ARROW
WARNING 1
WARNING 2
Flash Patterns
LED monitoring system for Flash PatternLEDs light up according to selected flash pattern
Built in Fault Buzzer for warning system. Built in swivel mounting bracket for ease of installation in vehicle cabin,
1 Power Switch7 Mode Selection SwitchesLED Lights up according to selected flash pattern and currently operating LEDs
1200mm
44
0m
m
BACK
Tel: (02) 9607 5774 | Fax: (02) 9607 5589Email: [email protected]: www.roadrunnerparts.com.au
Tel: (02) 9607 5774 | Fax: (02) 9607 5589 | Email: [email protected] | Web: www.roadrunnerparts.com.au
AAB-TRL-CB
AAB-TRL-CB Specifications Product Specification
Solar panel: 1 x 75W Battery: 1 x 200 AH deep cycle battery Hydraulic lifting system Trailer galvanized steel Designed to meet Australian standard
Trailer Dimensions Length (Overall): 3230mm Width (Travel position): 1660mm Height (Travel position): 2480mm Height (Max operating position): 3850mm Weight (Trailer): 510kg Gross Trailer Mass: 700kg
Example Photos
SPECIFICATIONS
Weight: approx. 15 kgOperating voltage: 12/ 24 V DCPower consumption: 0,3 - 4 A
MultiSign ProLine SMD
Our high quality range of portable message boards, designed and manufactured in Germany. Available in Amber (1K) or 3 Colour (3K: Red, White, Amber) graphics. Vehicle mounted portable use.
• Case size 1260mm x 490mm. Wide light emitting angle and anti-glare screen
• Good visibility of all signs from nearly every viewing angle also at bright daylight
• Each LED can be selected individually• Low weight aluminium frame, seawater-resistant• Optional speed sensor available
REMOTE CONTROL OPTIONSThree remote controls to suit your requirements
Basic
Tel: (02) 9607 5774 | Fax: (02) 9607 5253Email: [email protected]: www.roadrunnerparts.com.au
Eco Pro
• Compact remote control for secure and easy operating of devices via cable connection• Large operating keys• Low weight• LCD-Display for indication of the most important functions
• Universal remote control for secure and easy operating also of complex devicesvia cable connection• Large operating keys• Easily readable large display
• Universal remote control for secure and easy operating also of complex devices via cable or radio connection• Large operating keys• Easily readable large display with additional touch screen function
Tel: (02) 9607 5774 | Fax: (02) 9607 5589Email: [email protected]: www.roadrunnerparts.com.au
Voltage : 12-24VPowerConsumption : 0,3 - 4 AApprox Weight : 15kg
•Available in Amber (1K) or 3 Colour (3K) graphics.
•Vehicle mounted / portable use.
•Wide light emitting angle and anti-glare screen.
•Good visibility of all signs from nearly every viewing angle night and day.
•Each LED can be selected individually.
•Low weight aluminium frame and seawater-resistant.
•Custom sizes available.
•Optional speed sensor available.
•Available remote controls are Basic, Pro or Eco.
BACK SIDE FRONT
DESIGNED, ENGINEERED AND MANUFACTURED IN GERMANY
Custom Sizes Are Available.Please contact us for size requests
Part No. NIS-229290-53-102
Frame - 1210mm x 1930mm
Display - 1080mm x 1800mm
Tel: (02) 9607 5774 | Fax: (02) 9607 5589Email: [email protected]: www.roadrunnerparts.com.au
WeNiPol II ST WeNiPol ST+Voltage : 12-24V
Housing (mm) :822(L) x 822(W) x 100(H)
aluminium, black
882(L) x 822(W) x 100(H)
aluminium, black
Current Consumption (12V) Bat 100% Brightness (pending on symbol/text) :
Traffic Sign 274-58 1,3 A-3,8A
Traffic Sign 276 1,2 A-2,9A
Traffic Sign 124 1,1 A-2,8A
Traffic Sign 274-58 1,3 A-6,1A
Traffic Sign 276 1,2 A-5,3A
Traffic Sign 124 1,1 A-5,2A
Approx Weight : 50kg
LED Raster : 20mmLED/m2 : 2500pcsAutomatic Day/Night
Adaption :Manually adjustable or automatic adaption 5-100%
Data Storage : With memory stick, prepared for free programming of up to 250 symbols/texts
Photometric Tests : Tested according to European Norm EN 12966
Possible LED Colours : Red/White/Yellow/Blue
LED Advance Warning Lamps (Optional) : Available in Yellow and/or Blue
Size Of Symbols : 750mm
•Variable Message Sign with photometric device, for mounting on vehicles.
•Display of all usual traffic signs, bypassing symbols and texts, also dynamic.
•High daytime visibility of all signs, text and symbols by patented anti-glare plate, no phantom light.
•High-grade steel frame with motor-driven lifting and lowering device (utility model).
•Viewing window protected when the sign is lowered.
•Assembly of the WeNiPol II Proline with up to 4 colours possible.
•Display of texts also possible in a flashing mode or alternating with symbols.
•Also available with integrated yellow and/or blue LED advance warning lamps (ST+).
LED Variable Message Sign WeNiPol IIType Ref Num. Description
WeNiPol II ProLine ST 12/24V, Red/White/Yellow 129 503-003-01 WeNiPol II ProLine consisting of:LED board in a high-grade steel frame with up to 250 firmly programmed traffic signs, symbols and texts in static and dynamic versions.
WeNiPol II ProLine ST 12/24V, Red/White 129 503-002-01
WeNiPol II ProLine ST+ 12/24V, Red/White 129 503-002-02
DESIGNED, ENGINEERED AND MANUFACTURED
IN GERMANY
with Folding Frame
Tel: (02) 9607 5774 | Fax: (02) 9607 5589
WeNiPol II Proline
Email: [email protected]: www.roadrunnerparts.com.au
•Maximum speed in lifted position up to 80 km/h, in lowered position up to 160 km/h.
•Optional with GPS speed sensor, for automatic lowering when the maximum speed is exceeded.
•Remote control with LCD display for radio/cable operation.
•Very low construction Height
Accessories And Spare PartsType Ref Num.
Software and accessories for free programming of VMS WeNiPol II ZTS 129 501-81
Programmer 036 520-1
GPS Speed Sensor 229 484-2
Basic
Pro
Eco
The Basic-Remote is equipped with a graphical LCD display with LED backlighting and a membrane keyboard.
The Eco-Remote is equipped with a graphical LCD display and membrane keyboard.
The Pro-Remote is the same as the Basic but also comes with a touchscreen display and radio link/cable connection.
3 REMOTES TO CHOOSE FROM
Tel: (02) 9607 5774 | Fax: (02) 9607 5589Email: [email protected]: www.roadrunnerparts.com.au
Voltage : 12-24V
Housing (mm) : 525(L) x 1300(W) x 70(H)
Approx Weight : 40kg
•Photometric values tested according to European Standard EN 12966.
•With static or dynamic display.
•Automatic day/night adaption.
•Specified information for different hazardous situations as symbol or text.
•Freely programming of the symbol/text sequences according to your wishes.
•High daytime visibility also at daylight due to anti-glare screen.
•Roof frame made of brushed stainless steel with motor-driven lifting/lowering device.
•Maximum speed with lifted LED Variable Message Sign up to 80 km/h.
•Maximum speed with lowered LED Variable Message Sign up to 130 km/h.
•Eco-Remote control included with 10m cable.
•Protection class IP54.
•Protection shield made of red acryl.
•Mounting on vehicle with a stainless folding frame.
LED Variable Message Sign MultiSign Proline Traffic K3Type Ref Num.
LED VMS MultiSign Proline Traffic K3 229 275-103-12
DESIGNED, ENGINEERED AND MANUFACTURED IN GERMANY
with Stainless Folding Frame
The Eco-Remote is equipped with a graphical LCD display and membrane keyboard.
Tel: (02) 9607 5774 | Fax: (02) 9607 5589Email: [email protected]: www.roadrunnerparts.com.auFor details of your nearest reseller free call : 1800 724 690 | www.ionnic.com
LED Lighting
NEWPRODUCT
291014
Controller Functions
The Director Pattern (DIR. PAT.) button is used in conjunction with the top 4 buttons. When one of the top four patterns is engaged, pressing the DIR. PAT. button will then cycle to the next version of that pattern. There are 8 versions of each of the four patterns.
Lightbar patterns can be factory locked, MOQ's required.
The END LIGHT button controls the two outer most LED modules only. When the END LIGHT pattern is engaged, the END PAT. button cycles through the 8 versions of the END LIGHT pattern.
Lightbar patterns can be factory locked, MOQ's required.
• Controller shows flash patterns in real time.
• Each mode has multiple selectable flash patterns.
• Supplied complete with mounting bracket, controller and harness.
• 10 epoxy sealed, high output LED modules.
• End modules available in 4 colour combinations.
• Dimming function via controller.
• Epoxy encapsulated electronics for environmental & vibration protection.
• Multiple mounting options.
• LEDs rated to 100,000 hours.
• Low current draw.
• Multi-voltage.
• 5 year warranty.
ION
NIC
Traffic Director
Voltage : 12-24VMax. Current Draw : 3.5A @ 12VLens : PolycarbonateBase : AluminiumApprovals : SAE-W-07Light source : LEDController Harness : 5.5mPower Harness : 12.5mKit Weight : 3.6kgIngress Protection : LED Modules IP67
IONNIC Traffic DirectorAmber/Amber/Amber Red/Amber/Blue Blue/Amber/Blue Green/Amber/Green
12-24V LSTA001 LSTA002 LSTA003 LSTA004
Supplied with mounting bracket, controller and harness.
1010mm
66m
m57
mm
20mm140mm
58m
mLSTA001
1010mm
66m
m57
mm
20mm140mm
58m
m
Like Us On Facebook
Tel: (02) 9607 5774 | Fax: (02) 9607 5589Email: [email protected]: www.roadrunnerparts.com.au
Like Us On Facebook9K N
iBus
•Housing made for GRP (Glass fibre reinforced plastic) with LED 9 character textmatrix.
•With continuous brightness adaption.
•With Basic cable remote control.
LED TextmatrixType Part Num.
LED Textmatrix 9K NiBus 12/24V with sunshade and Standard Remote Control 129491-001
LED Text D
isplay (Textmatrix)
Examples of Application:
- On Service and maintenance vehicles- On Office vehicles
- For Speed limitation- For pre-warning
- For traffic guidance
Operating Voltage : 12/24V
Operating Temperature : -25°C - +65°C
Day / Night Adaptation : Yes
Light Emitting Surface : 1620 x 240
Light Colour : YellowInsulation : IP X4Fixing : with 6 threaded bolts M8Measurements (mm) : 1760 (Width With Sunshade)
370 (Height with Sunshade)165 (Depth with Sunshade)
70 (Depth without Sunshade)
Basic
The Basic-Remote is equipped with a graphical LCD display with LED backlighting and
a membrane keyboard.
• Ultralowprofilelightbar.• Compactcontrollerwithreal-timedisplay.• Forwardwork/take-downlamps.• Alleylights.• Integratedtrafficdirectorfunction.• Differentcolourcombinationsavailableupon
request.• Multipleflashpatterns.• Lightbar&TrafficDirectorpatternscanbefactory
locked.• LatesthighoutputLEDtechnology.• Robusthousingandlens.• Suppliedwithpermanentmounthardwareand
universalguttermountkit.• AdditionalLEDmodulescanbefittedtomount.• Easy2wireinstall.• DimmingFunction.• 5yearwarranty.
SPECIFICATIONS
Voltage:12-30VFlashPatterns:26CurrentDraw:10.5A@12VLens:PolycarbonateHousing:AnodisedAluminumEndCaps:ABSWeight:11.3kgHarnessLength:6.5mOperatingTemperature:0-40°Cto60°CLightSource(1200mm):16x4Modules,2x3LEDModules
1165mm
120m
m
330m
m
65m
m
Alley LightAlley Light
Forward Work/Take-Down Lamps
Alley lights
KLED03B LED modulescan be fitted to themount for additionallateral illumination.(Sold separately)
Forward work/take-down lamps
Real-time display showing current
flash pattern
Amber Magenta Red/Blue Amber Magenta Approx Length
12-30V LSA-200A-11AA LSA-266A-11AA LSA-277A-11AA LSA-200A-110A LSA-266A-110A 1200mm
12-30V LSA-400A-11AA Light Source: 22LEDs 1430mm
12-30V LSA-600A-11AA Light Source: 26LEDs 1700mm
Supplied with permanent mount hardware and universal gutter mount kit
Invader LED Lightbar
Tel: (02) 9607 5774 | Fax: (02) 9607 5589Email: [email protected]: www.roadrunnerparts.com.au
Lightbar Pattern Mode
Traffic Director Mode
Alley Lights
Spot/Take-Down Lights
LightbarPatternmodecontrolsthemajorityofLEDmodules.Arangeofflashpatternsutilisingthesemodulescanbeselectedusingbuttonshighlightedabove.
TrafficDirectormodecontrolstherear8LEDmodules.Arangeofflashpatternscanbeselectedusingthe5buttonsonthecontrol-lerhighlightedabove.
TheAlleyLightLEDmodulesateitherendofthelightbararecon-trolledviaasinglededicatedbut-ton.TheseLEDsfeatureopticsforfocusedlightdispersion.
TheAlleyLightLEDmodulesateitherendofthelightbararecon-trolledviaasinglededicatedbut-ton.TheseLEDsfeatureopticsforfocusedlightdispersion.
Tel: (02) 9607 5774 | Fax: (02) 9607 5589Email: [email protected]: www.roadrunnerparts.com.au
Amber Magenta Approx Length
12-30V LSA-200A-110A LSA-266A-110A 1200mm
Supplied with permanent mount hardware and universal gutter mount kit
Invader LED Lightbar with Message Board
• Lowstandbycurrent.• ReducedRFemissionsandsusceptibility.• Extremelyreliablecommunicationlink.• SimplemessageprogrammingonM4systemvia
WindowssoftwareandUSBinterface.• M4systemsupportsmoreflexiblemessages,
includingscrollingmessages.• Allowsyoutomakesimplefieldchangeswiththe
M4system.
• Maxspeedof80kph(tipupunit).• Safetyclutchmechanism.• Canholdupto99messages.• Messagesofupto2000charactersare
pre-programmedatthefactory,orcanbepurchasedtoenableallowtoprogramyourownmessages.
Tel: (02) 9607 5774 | Fax: (02) 9607 5589Email: [email protected]: www.roadrunnerparts.com.au
Tel: (02) 9607 5774 | Fax: (02) 9607 5589Email: [email protected]: www.roadrunnerparts.com.au
Synchros
Power Supply : 10 - 30 Volt DC
Operating Time : > 12 hours
Stability of Sequence : > 4 hours
Battery Type : Nickel-Cadmium (LED Guide Light Elements)Charging Time (Approx) : 10 hours for completely discharged battery
Current Consumption :Approx. 0,5 A at completely discharged battery
Approx. 10 mA at completely charged battery
On-Time : 100 ms
Max. Light Intensity : yellow approx. 500 cd, blue approx. 100 cd
Light Opening : 15 degrees horizontal / vertical
Guide Light Time : 120 ms from element to elementPulse Rate : 60 pluses/min, 1 HzInsulation : IP66 (LED Guide Light Elements)
Dimensions :LED Guide Light Elements 100 x 90 x 25 mm
Transport and charging case 260 x 160 x 125 mm
Weight : 2,5 kg
•Easy activation and synchronization (process occurs in the transport and charging case by using the toggle switch).
•Gives clear recognition to other drivers on upcoming incident.
•Lights are synchronized to guide drivers safely past the incident.
•Accidently driving over the guiding lights cause no damage upto 40 tons to the device or vehicle, and are completely waterproof.
•A set consists of 5 LED Guide Light Devices (yellow ,blue or red) in a combined transport and charging case with charging cable.
•The small case is suitable for limited spaces like the outer or inner storage compartment of trucks or the interior of emergency vehicles.
•The charging cable can be connected with the cigarette lighter or the on-board socket.
•FIELD TESTED FOR MAXIMUM QUALITY
LED Synchros SetType Ref Num. Description
Synchros Sequential Hazard Set YELLOW, 12/24V 141 060-1 Consisting of 1 case with 5 LED-Guide Light Devices and 1 charging cableSynchros Sequential Hazard Set BLUE, 12/24V 141 060-2
Mains Charger 070 157-1 For charging by 230 V AC
Mobile LED
Sequential H
azard Set
Compact Design & Easy Handling
The compact case enables uncomplicated transport
and charging.
Includes a charging cable and can connect to the vehicle socket anytime.
The lights are switched on and synced in the case by an
integrated toggle switch.
For removing the devices, they only have to be tilted in their charging slots.
Like Us On Facebook
Light-Ball
Type : Light-Ball Halogen Light-Ball HTI Light-Ball HMI
Ref Num : 071 060-5 071 060-11 071 060-12Protection Class : IP 54 IP 54 IP 53
Diameter : 1.0m x 0.7m 1.1m 1.1mPower Of Lamps : 4000W 1000W 1200W
Protection : Si 10A Si 10A Si 10AVoltage : 230V 230V 230V
Connecting Cable : 12 X 1.5 3G 1.5 3G 1.5
Light Source :Halogen 4
x 1000W
HTI 1
x 1000W
HMI/MSR 1
x 1200W
Average Lifetime : 300 hrs 6000 hrs 750 hrsNeces. Power Set : 5 kW Ballast 3 kW 3 - 3.5 kW
Lamp Socket : R 7s E 40 G 38Illuminated Area : 3000m2 2200m2 2500m2
Operating Height : 4.5 - 5.5m 2.5 - 5m 2.5 - 5mWeight (Approx) : 20 kg 8 + 12 kg 8 + 19 kg
Inflation Time : 15 - 20 Seconds 45 Seconds 45 SecondsWind Resistance : 70 km/h 100 km/h 100 km/h
•The Light-Ball is a self-inflating balloon which has been designed especially for security at rescue-sites, roadwork and construction sites, tunnels and building engineering.
•Light-Ball always gives a uniform and glare-free light using halogen lamps.
• Integrated vacuum blast inflating cover that takes just seconds to inflat. The blast also cools the bulb thus giving it a long life-time.
•Quick and easy to install without the need for tools or special knowledge.
•Can be mounted onto tripods, vehicles machines and even people.
•The light diffusing cover in combination with approved light engineering provides illumination of surface areas up to 3000m2 with a single balloon.
•Very light weight and packaged for easy transportation with little space required to store and move around.
Light-BallType Part Num.
Light-Ball Halogen 4000W (4 x 1000W) 071 060-5
Light-Ball HTI 1000W, including ballast 071 060-11
Light-Ball HMI 1200W, including ballast 071 060-12
Mobile Illum
ination System
Like Us On Facebook
Tel: (02) 9607 5774 | Fax: (02) 9607 5589Email: [email protected]: www.roadrunnerparts.com.au
Mobile IlluminationSystem
Light-Ball AccessoriesType Ref Num.
Spare Cover for Halogen 2000W 071 061-11-02
Spare Cover for HMI AND HTI 071 061-12
Spare Cover for Halogen 4000W 071 061-13
Adapter/Fire Brigade 071 061-3
Halogen Bulb, 230V 1000W 090 270-4
HTI-Bulb 1000W 090 271-1
HMI-Bulb 1200W 090 272-1
Tel: (02) 9607 5774 | Fax: (02) 9607 5589Email: [email protected]: www.roadrunnerparts.com.au
Choose The Illumination For Your Purpose
1. Light Colour - Halogen light (artificial light) is a warm light, turning a little yellowish, whereas HMI and HTI (daylight) are rather harsh white light.
2. Colour Temperature - Colour temperature of halogen is 3200 K, HMI = 5600 K and HTI = 4000 K.
3. Light Intensity - Light intensity (lumen) of halogen lamps is approx. 25 lumen per Watt, of HMI and HTI approx. 100 lumen per Watt.
4. The Ballast - Halogen lamps do not need a start ballast whereas all daylight lamps (HMI and HTI) require a start ballast.
5. Lifetime Of Light Sources - An additional difference is the lifetime of the light sources. The halogen lamp 1000W has a lifetime of approx. 300 hours; the HMI-lamp has a lifetime of approx. 750 hours and the HTI-lamp approx. 6000 hours.
6. Start After Power Failure - Light-Ball halogen allows a restart immediately after failure. A restart of Light-Ball HTI can be achieved after approx. 3 to 10 minutes.
Kit contains 1 monitor (BR-M702), 1 BR-C01 camera & 20m cable
Kit contains 1 monitor (BR-M501), 1 BR-C01 camera & 20m cable
Kit contains 1 monitor (BR-M704), 1 BR-C01 camera & 20m cable
Kit contains 1 monitor (BR-M701), 1 BR-C01 camera & 20m cable
Kit contains 1 monitor (BR-M1001), 1 BR-C01 camera & 20m cable
Kit contains 1 monitor (BR-M3501 - contains 1 BR-L01 & 1 BR-L03), 1 BR-CM04 Camera, 1 BR-L01 RCA Cable & 2 BR-L03 power lead
Tel: (02) 9607 5774 | Fax: (02) 9607 5589Email: [email protected]: www.roadrunnerparts.com.au
10.1” Quad Split CCTV Ki - BR-CK1001
• 4 camera inputs• Single/Split/Quad Views selectable• Customisable triggered views• Auto on when reverse gear selected• Mirror or normal views• Adjustable mount
Resolution: 1024 x 600Voltage: 12-24VDCPower Consumption: 5 WattEMC: C-Tick
7” Quad Split Waterproof CCTV Kit - BR-CK7004
7” Quad Split CCTV Kit - BR-CK7002
• 4 camera inputs• Single/Split/Quad Views selectable• Customisable triggered views• Auto on when reverse gear selected• Mirror or normal views• Adjustable mount
• Waterproof body - IP67• 4 camera inputs• Single/Split/Quad Views selectable• Customisable triggered views• Auto on when reverse gear selected• Mirror or normal views
Resolution: 800 x 480Voltage: 12-24VDCPower Consumption: 5 WattEMC: C-Tick
Resolution: 800 x 480Voltage: 12-24VDCPower Consumption: 5 WattEMC: C-Tick
5” CCTV Kit - BR-CK5001
7” CCTV Kit - BR-CK7001
• 2 camera inputs• PAL & NTSC auto switching• Built-in speaker• Auto on when reverse gear selected• Adjustable mount• Adjustable contrast, colour & brightness
• 2 camera inputs• PAL & NTSC auto switching• Built-in speaker• Auto on when reverse gear selected• Adjustable mount• Adjustable contrast, colour & brightness
Resolution: 640 x 480Voltage: 12-24VDCEMC: C-Tick
Resolution: 800 x 480Voltage: 12-24VDCEMC: C-Tick
Like Us On Facebook
3.5" Rear View Mirror CCTV Kit - BR-CK3501
Resolution: 800 x 480Voltage: 12VDCPower Consumption: 2 WattOperating Temp: -30° to 70°EMC: C-Tick
• Replace factory rear view mirror• 12V power input• 1 camera input with RCA connector• Auto ON when reverse gear selected• NTSC/PAL auto switching
Mirror Mount suits most models ofFord / GM / Mazda / Mitsubishi / Nissan / Toyota
IR Waterproof Camera - BR-C16
Wide Angle Waterproof Camera - BR-C06
• Ultra wide angle lens• Compact housing• Waterproof - IP68• NTSC 510x492/PAL 500x582
Image Sensor: 1/3” Colour CCDIngress Protection: IP68Field of View: 170° Hor.TV Lines: 420Vibration: 10GVoltage: 12VDCOperating Temp: -20° to 70°Approvals: CE, RoHS
• Night Vision function with IR LEDs• Waterproof - IP68• Integrated microphone• NTSC/PAL
Image Sensor: 1/4” Colour CCDIngress Protection: IP68Field of View: 120° Hor.TV Lines: 420Vibration: 10GNight Vision: 18 LEDsVoltage: 12VDCEMC: C-TickApprovals: CE, RoHS
IR Bullet Camera - BR-C03
• Night Vision function with IR LEDs• Angled spacers for mounting on sloping surface• Compact housing• Waterproof - IP68• NTSC/PAL
Image Sensor: 1/3” Colour CMOSIngress Protection: IP68Field of View: 120° Hor.TV Lines: 480Vibration: 10GVoltage: 12VDC
IR Front Camera- BR-C07
• Night Vision function with IR LEDs• Waterproof - IP68• NTSC/PAL
Image Sensor: 1/4” Colour CCDIngress Protection: IP68Field of View: 120° Hor.TV Lines: 420Vibration: 10GNight Vision: 9 LEDsVoltage: 12VDCOperating Temp: -20° to 70°Approvals: CE, RoHS
Butterfly Rear Camera - BR-CM01
• Ultra wide angle lens• Waterproof - IP68• Compact Housing• NTSC 510x492/PAL 500x582
Image Sensor: 1/4” Colour CMOSIngress Protection: IP68Field of View: 170° Hor.TV Lines: 420Vibration: 10GVoltage: 12VDCOperating Temp: -20° to 70°Approvals: CE, RoHS, E-mark
Tel: (02) 9607 5774 | Fax: (02) 9607 5589Email: [email protected]: www.roadrunnerparts.com.au
IR Camera With Sun Visor - BR-C01
Image Sensor: 1/3” Colour CCDIngress Protection: IP68Field of View: 120° Hor.TV Lines: 420Vibration: 10GNight Vision: 18 LEDsVoltage: 12VDCEMC: C-TickApprovals: CE, RoHS
• Night Vision function with IR LEDs• Waterproof - IP68• Integrated microphone• NTSC 510x492/PAL 500x582
CCTV Systems
Tel: (02) 9607 5774 | Fax: (02) 9607 5589Email: [email protected]: www.roadrunnerparts.com.au
IR Side Camera - BR-C08
• Night Vision function with IR LEDs• Waterproof - IP68• NTSC 510x492/PAL 500x582
Image Sensor: 1/4” Colour CCDIngress Protection: IP68Field of View: 120° Hor.TV Lines: 420Vibration: 10GNight Vision: 9 LEDsVoltage: 12VDCOperating Temp: -20° to 70°Approvals: CE, RoHS
IR Roof Mount Camera - BR-C14
Image Sensor: 1/4” Colour CCDIngress Protection: IP68Field of View: 120° Hor.TV Lines: 420Vibration: 10GNight Vision: 9 LEDsVoltage: 12VDCOperating Temp: -20° to 70°Approvals: CE, RoHS
• Unique design for roof mount application• Night Vision function with IR LEDs• Waterproof - IP68• NTSC 510x492/PAL 500x582
Bullet Rear Camera - BR-CM02Image Sensor: 1/4” Colour CMOSIngress Protection: IP68Field of View: 170° Hor.TV Lines: 420Vibration: 10GVoltage: 12VDCOperating Temp: -20° to 70°Approvals: CE, RoHS, E-mark
• Ultra wide angle lens• Compact housing• Waterproof - IP68• NTSC 588x488/PAL 628x528
Mirror Side Camera - BR-CM03
• Ultra wide angle lens• Compact housing• Waterproof - IP68• NTSC 588x488/PAL 628x528
Image Sensor: 1/4” Colour CMOSIngress Protection: IP68Field of View: 170° Hor.TV Lines: 420Vibration: 10GVoltage: 12VDCOperating Temp: -20° to 70°Approvals: CE, RoHS, E-mark
HD Camera For Mercedes Sprinter - BR-C07SC-HD
• Replace factory brake light on Mercedes Sprinter• High Definition• Night Vision function with IR LEDs• Waterproof - IP68• NTSC 1020 x 508 / PAL 1020 x 596
Image Sensor: 1/3” Colour CCDIngress Protection: IP68Field of View: 130° Hor.TV Lines: 700Vibration: 10GNight Vision: 9 LEDsVoltage: 12VDCOperating Temp: -20°C to 70°CApprovals: CE, RoHS
HD Mirror Mount Camera - BR-C07AC-HDImage Sensor: 1/3” Colour CCDIngress Protection: IP68Field of View: 130° Hor.TV Lines: 700Vibration: 10GNight Vision: 9 LEDsVoltage: 12VDCOperating Temp: -20°C to 70°CApprovals: CE, RoHS
• Universal side mirror arm clamp bracket• High Definition• Night Vision function with IR LEDs• Waterproof - IP68• NTSC 1020 x 508 / PAL 1020 x 596
Monitor To Camera Cables, Adaptors & Accessories
BR-L01: RCA Extension Cable - 5mBR-L02: Camera to RCA Adaptor CableBR-L03: RCA power lead - 1m with fuse & fuse holderBR-L04: Cable Splitter - Cameras to 2 monitorsBR-L07: Suzi coil kit; contains 5m cab side cable, 20m trailer side cable and suzi coil
BR-A001: Vacuum suction monitor mount, suit 5" & 7" BR Series monitors
Mini Rear Camera - BR-CM04Image Sensor: 1/4” Colour CMOSIngress Protection: IP68Field of View: 170° Hor.TV Lines: 420Vibration: 10GVoltage: 12VDCOperating Temp: -20° to 70°Approvals: CE, RoHS, E-mark
• Ultra wide angle lens• Compact housing• Waterproof - IP68• NTSC 588x488/PAL 628x528
License Plate Rear Camera- BR-CL03
• Ultra wide angle lens• Universal fit above license plates• Waterproof - IP68• NTSC 588x488/PAL 628x528
Image Sensor: 1/4” Colour CMOSIngress Protection: IP68Field of View: 170° Hor.TV Lines: 420Vibration: 10GVoltage: 12VDCOperating Temp: -20° to 70°Approvals: CE, RoHS, E-mark
Mobile DVR HDD 4 & 8 Channel Systems
Ingress Protection: IP54HUD Size: 4 - 500GB. 8 - 1TBVoltage: 7-36VWeight: 1.5kg (No HDD)Approvals: CE, RoHS
• Real-time 4 & 8 channel HDD mobile DVR• Over voltage, current and short circuit protection• Multi-voltage• Dust proof - IP54• Shock and vibration resist• 1TB hard driver model available for 4 Channel System
BR-R404 - GPS BR-R808 - GPSBR-RW404 - GPS+Wifi BR-RW808 - GPS+WifiBR-RWG404 - GPS+Wifi+3G BR-RWG808 - GPS+Wifi+3G
Mobile DVR SD 4 Channel
Ingress Protection: IP54Voltage: 7-36VWeight: 0.5kgApprovals: CE, RoHS
• Real-time 4 channel SD Card mobile DVR• Over voltage, current and short circuit protection• Multi-voltage• Dust proof - IP54• Shock and vibration resist
BR-R04 - GPS BR-RW04 - GPS + Wifi
BR-L07
BR-L01
BR-A
001
VBV-L405: Cable - 5mVBV-L410: Cable - 10mVBV-L420: Cable - 20mVBV-L430: Cable - 30m
Anti Vandal Dome Camera - BR-CD02
Image Sensor: 1/3” Colour CCDIngress Protection: IP68Field of View: 120° Hor.TV Lines: 420Vibration: 10GVoltage: 12VDCOperating Temp: -20°C to 70°CApprovals: CE, RoHS, E-mark
• Aluminium Housing• Night Vision function with IR LEDs• Waterproof - IP68• NTSC 510 x 492 / PAL 500 x 582
Tel: (02) 9607 5774 | Fax: (02) 9607 5589Email: [email protected]: www.roadrunnerparts.com.au
CC
TV S
yste
ms
Tel: (02) 9607 5774 | Fax: (02) 9607 5589Email: [email protected]: www.roadrunnerparts.com.au
Backeye 3
60 S
elect
Voltage : 12-24VCurrent Draw : 1.23A Video System : NTSCCamera Field of View : 185° Hor. 142° Vert.Max. Camera Inputs : 4Frame Per Second : 30Max. Combined Resolution : 640 x 480Video Outputs : 2Trigger Inputs : 3Vibration : 10GEMC : CE & ‘e’ markedOperating Temperature : -30°C to 75°CIngress Protection : Camera IP67
•Eliminates blind spots.
•Comprehensive view of the surrounding areas in a single image.
•360° real-time video output.
•Customisable triggered views.
•On-screen distance markers on rear view.
•Configurable viewing distance to suit different applications.
•Multi-voltage.
•Compatible with Brigade monitors & Mobile Digital Recorders.
Split Screen View
FL R
R
FL R
R
FL R
R
FL R
R
The Backeye 360 Select system shows 2 images on screen at all times.
The first is the remarkable 360° view surrounding the vehicle while the second is a view from an individual camera.
This secondary view is controlled by trigger inputs and can be used to show a side camera when the vehicle turn signal is activated and also to the rear when reverse gear is engaged.
On screen icons show which camera is currently being displayed.
The operator also has the option to manually select which camera is being displayed via the dash mounted remote.
At all times the 360° view remains on screen.
Reverse & 360°
Left & 360° Right & 360° Reverse & 360° Front & 360°
Like Us On Facebook
For details of your nearest reseller free call : 1800 724 690 | www.ionnic.com
CCTV Systems
Tel: (02) 9607 5774 | Fax: (02) 9607 5589Email: [email protected]: www.roadrunnerparts.com.au
Backeye 360 Select Kit Kit contains:
1 x ECU Unit4 x Wide Angle Camera1 x Cable - 20m ECU to Camera2 x Cable - 15m ECU to Camera1 x Cable - 10m ECU to Camera1 x Adaptor - Monitor to RCA Connector1 x Adaptor - RCA Female to Female1 x Backeye Select 7" Monitor1 x Remote
Part No. Description
BN-770D-000 4 Camera Kit with Backeye Select 7" Monitor
Backeye 360 Systems are required to be installed & calibrated by an IONNIC trained technician.
Backeye 360 Select ComponentsPart No. Description
BN360-100C Camera - Backeye 360 Select
BN360-L120 Cable - 20m ECU to Camera
BN360-L115 Cable - 15m ECU to Camera
BN360-L110 Cable - 10m ECU to Camera
VBV-770DM Monitor - Backeye Select 7"
AC-024 Adaptor - Connect Backeye Select Monitor to RCA Connector
AC-059 Adaptor - Connect RCA Female to Female
BN360-CAL-MAT Calibration Mat
BN360-CT-01 Calibration Tool
ECU
Camera
Remote
Monitor
VBV-770DMBN360-100C BN360-L110
Ø 4mm 48mm
25mm 10mm
145mmØ 4mm
126m
m
169mm
157mm
80mm
32mm
36mm
60mm 46mm
49mm
7”
122m
m
181mm 45mm 30mm
Tel: (02) 9607 5774 | Fax: (02) 9607 5589Email: [email protected]: www.roadrunnerparts.com.au
Backsense R
adar
In-Cab Audible & Visual DisplayWhen an object is detected, the in-cab
display LEDs illuminate and an audible alert will sound.
Each LED represents approximately 1/5 of detection distance
Voltage : 12-24VCurrent Draw : 0.4ARadar Frequency : 24.086GHz to 24.218GHzAuxiliary Output : 0.5A
Weight :Sensor - 0.7kg
Display - 0.3kgVibration : 20GShock : 100GEMC : CE & 'e' markedApprovals : ISO 16750/13766, EN13309 & FCCOperating Temp : -40°C to 85°CIngress Protection : Sensor - IP69K
•Dectects moving, stationary & multiple objects.
•High frequency continuous wave provides increased reliability & low false alarm rates.
•Effective through non-metallic surfaces like plastics & fiberglass.
•BS-8000 model has an adjustable detection range of 3m to 30m.
•Self-diagnostic function.
•Rugged cable system withstands harsh environmental conditions.
• In-cab 5 stage audible & visual alert.
•Auxiliary output to activate additional items such as cameras & alarms.
•Transient, short circuit, overcharge & reverse polarity protection.
•Epoxy filled for maximum vibration resistance.
•Environmentally sealed sensor - IP69K.
•Sensor can be steam & pressure cleaned.
•Multi-Voltage.
•2 Year Warranty
Like Us On Facebook
ConfigurableThe fully configurable BS8000 is supplied
with easy to use PC Software for setting the following parameters :
- Detection zone length & width- Blind Area Mapping
- Buzzer Starting Zone- Trigger Output Length
Tel: (02) 9607 5774 | Fax: (02) 9607 5589Email: [email protected]: www.roadrunnerparts.com.au
Backscense Radar KitsPart No. Type Detection Distance (m) Detection Width (m) Detection Zones Kits Contain:
BS-7030 Fixed Range 3 2.5 5 x 0.6m - Sensor Unit- Audio/Visual Display- 9m Cable (Sensor To Display)- Sensor & Display Mounting Hardware- Installation & Operation Manual- BS-8000 Kit Contains Software CD & USB Cable
BS-7045 Fixed Range 4.5 3.5 5 x 0.9m
BS-7060 Fixed Range 6 4.5 5 x 1.2m
BS-8000 Configurable 3 - 30 2 - 10 Configurable
Accessories & Spare PartsPart No. Description
BS-05B Adjustible Sensor Bracket
Supplied with bolts, washers & nylock nuts
BS-05DCX Extension Cable - 5m
BS-09DCX Extension Cable - 9m
BS-7030D Display - 3m Range
BS-7045D Display - 4.5m Range
BS-7060D Display - 6m Range
BS-8000D Display - Configurable Range
BS-70XXS Sensor - Fixed Range
BS-8000S Sensor - Configurable Range
Tel: (02) 9607 5774 | Fax: (02) 9607 5589Email: [email protected]: www.roadrunnerparts.com.au
Like Us On Facebook
8
White Sound Reversing Alarms
bbs-
tek
Sel
f-Adj
ustin
g
• Unique multi-frequency white sound.
• Continuously self-adjusts to 5-10dB above ambient sound pressure levels.
• Eliminates noise nuisance complaints.
• Sound confined to the danger zone.
• Instantly locatable sound.
• Environmentally sealed - IP68.
• Epoxy filled for maximum vibration resistance.
• Can be steam & pressure cleaned.
• Multi-voltage.
• Lifetime warranty.
bbs-tek® Self-AdjustingTake the guess work out of choosing the best sound pressure level (SPL) for your application.
Ideal for vehicles or machinery working in areas with widely differing ambient noise levels, where a fixed-volume reversing alarm will be either too quiet in loud environments (very hazardous), or too noisy in quiet environments (irritating and a nuisance).
Brigade bbs-tek® self-adjusting reversing alarms utilise a small hidden and highly robust microphone to measure ambient SPL. They then self-adjust their own SPL, up or down, to maintain an output of just 5-10dB louder than the surrounding environment.
Loud enough to be heard, but not so loud as to cause a nuisance.
100
Dec
ibel
s (d
B)
95
90
85
80
MediumDuty
HeavyDuty
Body : Medium Duty AESHeavy Duty Glass Reinforced Nylon
Cable Length : 1mVibration : 10GEMC : CE, C-Tick & ‘e’ markedStandards : Conforms to SAE J994 environmentalOperating Temperature : -40°C to 85°CIngress Protection : IP68
BBS107SA
Microphone for measuring ambient SPL
Microphone for measuring ambient SPL
White Sound
Tel: (02) 9607 5774 | Fax: (02) 9607 5589Email: [email protected]: www.roadrunnerparts.com.au
9
bbs-tek Self-Adjusting - Heavy DutyPart No. Voltage SPL - dB(A) @ 1m Frequency - kHz Current Draw (A) Sounder Unit
BBS107SA 12-24 87 - 107 Multi 1.0 Driver
bbs-tek Self-Adjusting - Medium DutyPart No. Voltage SPL - dB(A) @ 1m Frequency - kHz Current Draw (A) Sounder Unit
BBS97SA 12-24 77 - 97 Multi 1.0 Speaker
BBS97SAHV 36-80 77 - 97 Multi 0.15 Speaker
White Sound Reversing Alarms
173mm
152mm
96mm
78mm
Ø11mm
Ø7mm65mm
76mm
126mm
98-108mm
Tel: (02) 9607 5774 | Fax: (02) 9607 5589Email: [email protected]: www.roadrunnerparts.com.au10
bbs-tek Fixed Volume - Heavy DutyPart No. Voltage SPL - dB(A) @ 1m Frequency - kHz Current Draw (A) Sounder Unit
BBS102 12-24 102 Multi 1.0 Driver
BBS107 12-24 107 Multi 1.0 Driver
bbs-
tek
Fixe
d Vol
ume
• Unique multi-frequency white sound.
• Eliminates noise nuisance complaints.
• Sound confined to the danger zone.
• Instantly locatable sound.
• Environmentally sealed - IP68.
• Epoxy filled for maximum vibration resistance.
• Can be steam & pressure cleaned.
• Multi-voltage.
• Lifetime warranty.
White Sound Reversing Alarms
Body : Medium Duty AESHeavy Duty Glass Reinforced Nylon
Cable Length : 1mVibration : 10GEMC : CE, C-Tick & ‘e’ markedStandards : Conforms to SAE J994 environmentalOperating Temperature : -40°C to 85°C Ingress Protection : IP68
The bbs-tek® constant tone speaker uses multi-frequency white sound instead of the traditional single frequency sound.
White Sound dissipates much quicker, is directional, and is localised in the danger
zone, resulting in an enormous reduction in noise nuisance and complaints.
The unique localisation feature of the bbs-tek® White Sound means that in busy environments you can tell instantly where the sound is coming from and, therefore,
the direction of possible danger.
This makes bbs-tek® White Sound® much safer when used in areas that have several
vehicles moving.
White Soundshh...shh not bleep...bleep
BBS92HV
173mm
152mm
96mm
78mm
Ø11mm
White Sound
Tel: (02) 9607 5774 | Fax: (02) 9607 5589Email: [email protected]: www.roadrunnerparts.com.au
11
bbs-tek Fixed Volume - Medium DutyPart No. Voltage SPL - dB(A) @ 1m Frequency - kHz Current Draw (A) Sounder Unit Fig
BBS77 12-24 77 Multi 1.0 Speaker 1
BBS82 12-24 82 Multi 0.2 Speaker 2
BBS87 12-24 87 Multi 0.2 Speaker 2
BBS92 12-24 92 Multi 0.2 Speaker 2
BBS97 12-24 97 Multi 0.2 Speaker 2
BBS82HV 36-80 82 Multi 0.15 Speaker 3
BBS87HV 36-80 87 Multi 0.15 Speaker 3
BBS92HV 36-80 92 Multi 0.15 Speaker 3
BBS97HV 36-80 97 Multi 0.15 Speaker 3
bbs-tek Fixed Volume - Medium Duty - Tanker SpecificationPart No. Voltage SPL - dB(A) @ 1m Frequency - kHz Current Draw (A) Sounder Unit
BBS92ADR 12-24 92 Multi 0.3 Speaker
Tanker specification features 460mm cable with armoured conduit.
White Sound Reversing Alarms
Fig 1 Fig 2 Fig 3
Armoured conduit sealed into housing
Ø7mm65mm
76mm
126mm
98-108mm
Ø7mm65mm
76mm
126mm
98-108mm
32mm
64mm
105mm
75-85mm
Ø7mm45mm
54mm
91mm
76mm
Ø6mm
Tel: (02) 9607 5774 | Fax: (02) 9607 5589Email: [email protected]: www.roadrunnerparts.com.au
Like Us On Facebook
•Extremely compact & low profile LED Lightbar.
•14 flash patterns.
•Magnetic version features cigar plug with integrated on/off & pattern select switches.
•4 Bolt version can be synchronised with other 4 Bolt version Micro-Bars.
•Latest high output LED technology.
•Robust housing and lens.
•Gore filter technology to prevent ingress.
•Multi-voltage.
•Full 360° light dispersion.
•5 year warranty.
Voltage : 12-30VMax. Current Draw : 5A @ 12VFlash Patterns : 14Mount : 4 Bolt 4 x M6 BoltsLens : PolycarbonateHousing : PolycarbonateCable Length : 4 Bolt 0.4m
Magnetic 3mWeight 1.8kgLight Source : Centre 2 x 6-LED Modules
Corner 4 x 4-LED ModulesEMC : AS/NZ61000.6.3:2012Ingress Protection : LED Modules IP67Operating Temperature : -40°C to 60°C
IONNIC LED Micro-Bar - 4 BoltColoured Lens Clear Lens*
Amber Blue Green Red Amber Magenta
12-30V LSA-0110 LS-0330 LSA-0440 LSA-0550 LSA-011C LSA-066C
* Clear lens with coloured LED illumination.
Supplied with 4 x M6 bolts, nuts, washers, optional mounting brackets & hardware.
ION
NIC
LED
Micro
-Bar
LED
Lig
hting
IONNIC LED Micro-Bar - MagneticAmber
12-30V LSA-0110-M
Tel: (02) 9607 5774 | Fax: (02) 9607 5589Email: [email protected]: www.roadrunnerparts.com.au
Like Us On Facebook
•Designed & manufactured in Australia.
•Reduced overall height with low profile IONNIC Micro-Bar.
•Multi-voltage.
•All LED lighting.
•Equipped with ADR approved IONNIC LED combination lamps - stop, tail, indicator & reverse lamps.
•Extruded aluminium bar providing greater strength and adaptability.
•Mounting channel runs entire length of bar allowing virtually unlimited mounting options.
•Compatible with Rhino-Rack® mounting kits.
Low P
rofileLED
Minebar
Voltage : 12-24VBase : Anodised AluminiumHarness : 4m
Low Profile LED MinebarPart No. Voltage Beacon Type Alarm Type Sound Level - dB[A] @ 1m
22003A 12-24 IONNIC LED Micro-Bar Tonal 97
•Ultralowprofilelightbar.
•Lowcurrentdraw.
•Multipleflashpatterns.
•LatesthighoutputLEDtechnology.
•Robusthousingandlens.
•Multivoltageoperation.
•Suppliedwithmountingbrackets.
•Full360°lightdispersion.
•5yearwarranty.
Voltage : 12-30VMaximum Current Draw : 3A@12VFlash Patterns : 24Mount : 4xM6BoltsLens : PolycarbonateHousing : AnodisedAluminiumEnd Caps : ABSHarness Length: 6.5mWeight : 4.7kgOperating Temperature : -40°Cto60°CLight Source : 8x4LEDModules,2x3LEDModules
LED Mini-barAmber Red Red/Blue Amber/Green
12-30V LSA-1110-0 LSA-1550-0 LSA-1770-0 LSA-1880-0
Suppliedwithfittinghardware.
220mm
520mm
280m
m
330m
m80
mm
65m
m
220mm
520mm
280m
m
330m
m80
mm
65m
m
LowProfile-HighOutput
KeeptheoverallheightofyourvehiclecompactwhilemaintaininghighvisabilityusingthenewLEDMini-bar.
Lightbars
Tel: (02) 9607 5774 | Fax: (02) 9607 5589Email: [email protected]: www.roadrunnerparts.com.au
Tel: (02) 9607 5774 | Fax: (02) 9607 5589Email: [email protected]: www.roadrunnerparts.com.au
Like Us On Facebook
LED Hide-A-Way KitsPart No. Colour Other colour combinations available upon request.
LSHA01-AA Amber 1.6A @ 12V.
22 Flash Patterns.
Weight of 415g.
Polycarbonate Lens and Aluminium Base
Kits contain:
2 x LED Lights
1 x Controller
2 x 3m Extension Cables
LSHA01-BB Blue
LSHA01-MM Magenta
LSHA01-RR Red
LSHA01-RB Red / Blue
LSHA01-WW White
LED
Lig
hting
KR Series - 3 LEDAmber Blue Green Red Magenta White
KRLED03B-A KRLED03B-B KRLED03B-G KRLED03B-R KRLED03B-M KRLED03B-W
KR Series - 4 LEDAmber Blue Green Red Magenta White Red/Blue
KRLED04B-AA KRLED04B-BB KRLED04B-GG KRLED04B-RR KRLED04B-MM KRLED04B-WW KRLED04B-RB
K Series - 3 LEDAmber Blue Green Red Magenta White
KLED03B-A KLED03B-B KLED03B-G KLED03B-R KLED03B-M KLED03B-W
K Series - Dual 3 LEDAmber Blue White Red Red / Blue White / Amber
KLED23B-AA KLED23B-BB KLED23B-WW KLED23B-RR KLED23B-RB KLED23B-WA
Tel: (02) 9607 5774 | Fax: (02) 9607 5589Email: [email protected]: www.roadrunnerparts.com.au
VA-40300012-24V
IONNIC 105 LED - MagneticAmber Blue Green Red White
12-24V 105010 105210 105310 105410 105510
3.4m lead to cigar plug with integrated switch.
IONNIC 105 LED - 3 BoltAmber Blue Green Red White
12-24V 105000 105200 105300 105400 105500
Supplied with 3 x M5 bolts, nuts & shake-proof washers. Mounting: 3 x Ø 5mm holes @ 150mm PCD. 470mm free length of cable.
IONNIC 105 LED - Pole MountAmber
12-24V 105002
Other colours available upon request.
Preset to rotate light pattern.
IONNIC 101 LED Beacon - 3 BoltAmber
12-24V 101000
Supplied with 3 x M6 bolts, nuts, shake-proof washers & base gasket. Mounting: 3 x Ø 7mm holes @ 151mm PCD. 340mm free length of cable.
10700012-24V
5K1.AA00.M12-24V
Tel: (02) 9607 5774 | Fax: (02) 9607 5589Email: [email protected]: www.roadrunnerparts.com.au
98-4031350lm
98-4064680lm
98-2041170lm
98-2208190lm
98-23012870lm
Tel: (02) 9607 5774 | Fax: (02) 9607 5589Email: [email protected]: www.roadrunnerparts.com.au
SAE class 1 rated output. Aerodynamic low profile. 5 flash patterns available. Polycarbonate lens provides high durability
against harsh conditions. Epoxy filled base for enhanced moisture &
vibration protection. - IP67. Low current draw. Multi-voltage operation. 5 year warranty.
IONNIC LED BEACON
IONNIC LED WORKLAMPS
Multi-voltage operation. Long life LED’s. Even light patterns without hotspots. Impact resistant lens. Epoxy encapsulated electronics - IP67. Environmentally sealed aluminium body. Stainless steel hardware. 5 year warranty.
Worklamps
Emergency Lighting
The new IONNIC LED Beacon; versatile, bright & low profile, is now available.
Introducing a new range of general purpose LED worklamps ideal for use on service vehicles, 4WD’s, trucks, forklifts etc.
Utilising the latest technology IONNIC LED Worklamps provide outstanding light output from their compact designs with models ranging from 600lm up to 4000lm.
98-1090
98-1100
98-2090
98-2180
98-3181
98-3200
98-2400
98-3701
600lm
800lm
1200lm
1200lm
1600lm
1800lm
3200lm
4000lm
Part No.
Lumen Output
101000Part No.
LED
Work
lam
p
Tel: (02) 9607 5774 | Fax: (02) 9607 5589Email: [email protected]: www.roadrunnerparts.com.au
Like Us On Facebook
For details of your nearest reseller free call : 1800 724 690 | www.ionnic.com
Worklamps
NEWPRODUCT
•Canberemotecontrolledwithin200m.
•LED&HIDmodelsavailable.
•Adjustableto360°horizontal&120°vertical.
•Swivelhandle.
•Worklampcanbedetachedfrommountedbase.
• Impactresistantlens.
•Environmentallysealedbody.
•3yearwarranty.
IONNICRem
oteControlled
Model : LED HIDLumen Output : 4,000lm 3,200lmMax Power Consumption : 50W 35WConnector : 2.8mleadtocigarplugBody : ABSLens : PolycarbonateWeight : 3kg 2.7kgIngress Protection : IP65Operating Temperature : -40°Cto85°CColour Temperature : 6500K 6000KLight Source :10xCree®5WattLEDs H3BaseHID
Worklampcanbedetachedfrommountedbase
360°horizontalrotatable
120°verticalrotatable
98-310-12HID
98-150-12LED
200mm 185mm
260m
m
175mm 195mm
98-150-12V
V
V
NEWPRODUCT
Remote Controlled
Tel: (02) 9607 5774 | Fax: (02) 9607 5589Email: [email protected]: www.roadrunnerparts.com.au
For details of your nearest reseller free call : 1800 724 690 | www.ionnic.com 241014
Worklamps
NEWPRODUCT
3002752502252001751501251007525 500m
20
10
40
30
0
10
30
20
15°
2.5m
IONNIC Remote Controlled - LEDPartNo. Voltage
98-150-12 12
98-150-24 24
3002752502252001751501251007525 500m
20
10
40
30
0
10
30
20
15°
2.5m
IONNIC Remote Controlled - HIDPartNo. Voltage
98-310-12 12
V
V
V
Roadrunner Parts Australian Arrow Boards
Phone: (02) 9607 5774Facsimile: (02) 9607 5589
Websites: www.australianarrowboards.com.au www.roadrunnerparts.com.au Email: [email protected] [email protected] Address: Unit 2/42-44 Whyalla Place, PRESTONS 2170