® Specif icat ion Submittal page

Job Name:

Job Number:

Model Numbers:

QS Sensor Module QSM Sensor Interfaces

369242k 1 12.22.15

QS Sensor ModuleThe QS Sensor Module (QSM) is a ceiling-mounted device that integrates LutronR wireless and wired sensors and controls through the QS communication link to Energi Savr NodeTM (ESN) units, GRAFIK EyeR QS control units, QuantumR systems, SivoiaR QS shades / draperies, and myRoomT control modules.

Features•UsesClearConnectR RF Technology for communication

with Radio Powr SavrTM occupancy sensors, Radio Powr SavrT daylight sensors, and PicoR wireless controllers.

•QSMconnectstofourLutronR wired sensors or controls—occupancy sensors, daylight sensors, EcoSystemR infrared (IR) receivers, or EcoSystemR wallstations. Does not apply to wireless only models.

•PoweredbytheQSlink—nolinevoltageconnectionsarerequired.

•ContactLutronforcompatibilitydetailswiththeQuantumR system.

•CompatiblewiththeentireESN product family: — Allows LutronR wired occupancy sensors, daylight

sensors, EcoSystemR wall stations, EcoSystemR IR receivers, PicoR wireless controllers, Radio Powr SavrT wireless occupancy sensors and daylight sensors to control ESN units.

•CompatiblewithGRAFIK EyeR QS control units. — GRAFIK EyeR QS control unit models starting

with QSGR.

— Allows LutronR wired or Radio Powr SavrT wireless occupancy sensors and daylight sensors linked to a QSM to control the GRAFIK EyeR QS control unit.

—ContactLutronforcompatibilitywithPicoR wireless controllers, EcoSystemR wallstations, and EcoSystemR infrared (IR) receivers.

•CompatiblewithSivoiaR QS shades / draperies. — Allows PicoR wireless controllers to control SivoiaR QS

shades / draperies (QSM models with wireless inputs only).

•CompatiblewithmyRoomT power modules. — Allows Lutron wired & wireless occupancy sensors to

control power modules. — Allows PicoR wireless controls to control power

modules.

System Example

LUTRON

LUTRON

QS link

ControlPower120-277 V~

Emergency Contact Closure

Input

Programmable Contact Closure Input

Wireless Communication

Wired Daylight Sensors (up to 4) 2

Wired Daylight Sensors (up to 4) 1,2

EcoSystemR Digital Links (upto64ballastseach)

Wired Occupancy Sensors (up to 4)

Wired Occupancy Sensors (up to 4) 1

Wired EcoSystemR Wallstation or IR receivers (up to 4)

Wired EcoSystemR Wallstation or IR receivers (up to 4) 1

QSM

IR Transmitter

IR TransmitterOR OR

OR OR

seeTouchR QS Wallstation

Radio Powr SavrTM Occupancy Sensor (up to 10 per QSM)

Radio Powr SavrT Daylight Sensor (up to 10 per QSM)

Pico® Wireless Controller(upto10 per QSM)

Apple, iPhone, and iPod touch are trademarks of AppleInc.,registeredintheU.S.andothercountries.

Notes: 1 Upto4wiredinputstotal(ofanytype).2 Upto16wireddaylightsensorstotal

per EcoSystemR link.

® Specif icat ion Submittal page

Job Name:

Job Number:

Model Numbers:

QS Sensor Module QSM Sensor Interfaces

369242k 2 12.22.15

ModelsFrequency/ChannelCode* NumberofWiredInputs

QSMX-XW-X

Frequency/ChannelCode*2—431.5-436.6MHz U.S.A.,CanadaandMexico3—868.1-869.8MHz EuropeanUnionandUnitedArabEmirates4—868.1-868.5MHz SingaporeandChina5—865.5 - 866.5 MHz India7—433.0 - 434.7 MHz Hong KongX—No RF

*ContactLutronforfrequency/channelcodecompatibilitywith yourparticulargeographicregionifitisnotindicatedabove.

NumberofWiredInputs4—4X—None

Mounting MethodC—CeilingMount J—JunctionBoxCeilingMount

Availability/CompatibilityRefertothechartbelowtodetermineQSMmodelavailabilityandcompatibilitywithdifferentsensormodels.

LutronR Radio Powr SavrT

Models Available Occupancy / Vacancy Sensors

Daylight Sensors *

LutronR PicoR Wireless Controllers

QSM2-4W-C QSM2-XW-CQSM2-4W-JQSM2-XW-J

LRF2-OCRB-P, LRF2-OHLB-P, LRF2-OKLB-P, LRF2-OWLB-P, LRF2-VHLB-P, LRF2-VKLB-P, LRF2-VWLB-P, LRF2-OCR2B-WH, LRF2-VCR2B-WH

LRF2-DCRB MRF2-3BRL, MRF2-3B, MRF2-2BRL, MRF2-2B, QSR4P-3R, PJ-2B-Gxx-xxx, PJ-2BRL-Gxx-xxx PJ-3B-Gxx-xxx PJ-3BRL-Gx-xxx

QSM3-4W-C QSM3-XW-C

LRF3-OCRB-P LRF3-DCRB QSRKP-2, QSRKP-2R, QSRKP-3R

QSM4-4W-C QSM4-XW-C

LRF4-OCRB-P LRF4-DCRB QSRMP-2, QSRMP-2R, QSRMP-3R

QSM5-XW-C LRF5-OCRB-P LRF5-DCRB QSRNP-2, QSRNP-2R, QSRNP-3, QSRNP-3R

QSM7-4W-C QSM7-XW-C

LRF7-OCR2B-P LRF7-DCRB QSRQP-2, QSRQP-2R QSRQP-3, QSRQP-3R

QSMX-4W-C N/A N/A N/A

Mounting Method

*Daylightsensorscan'tbeusedaspartofmyRoomT solutions.

® Specif icat ion Submittal page

Job Name:

Job Number:

Model Numbers:

QS Sensor Module QSM Sensor Interfaces

369242k 3 12.22.15

Specifications

QS Sensor Module (QSM)Power

•24–36V •Currentdraw: max400mA(modelswithwiredinput)

max100mA(modelswithoutwiredinput)•PowerDrawUnits:(PDU) RefertotheQSLinkPowerDrawUnitsspecificationsubmittal(LutronR P/N 369405) for information concerning PDUsontheQSLink.UseonlyLutronR approved power sources.

•10-yearpowerfailurememory:restoressettingsand programming after power interruption.

Regulatory•LutronR Quality Systems registered to ISO 9001.2008.

QSM2 –•cULUSListed(USAandCanada).•FCCCompliant.ComplieswiththelimitsforaClassBdigitaldevice,persuanttoPart15oftheFCCRules(USA).

•ICCertified.(Canada).•SCTCertified(Mexico).

QSM3 –•CEMarked(EuropeanUnion).•TRATypeApproved(UnitedArabEmirates).

QSM5 –•WPCTypeApproved(India).

QSM7 –•FCCCompliant.ComplieswiththelimitsforaClassBdigitaldevice,pursuanttoPart15oftheFCCRules(USA).

Environment•AmbientTemperatureOperatingRange:32ºFto104ºF (0ºCto40ºC).

•Relativehumidity:lessthan90%non-condensing.•Forindooruseonly.

Terminals•Inputwiring:22AWGto12AWG(0.5mm2 to 4.0 mm2)•QSlinkwiring:22AWGto12AWG(0.5mm2 to 4.0 mm2)

Mounting•QSM units shouldbemountedinthemiddleofnon-metalceilingtileordrywall,visiblefrominsidethespace.

•InstallationnearmetalotherthanaJunctionBoxmayreduce RF range.

Wireless Communication (models with wireless inputs only)

•RFRange:60ft(18m)lineofsight,or30ft(9m)through typical construction materials.

•Toensureoptimalwirelessrange,installtheQSMintheceilinginavisiblepositionfrominsidethespace.

•LutronR Radio Powr SavrTM Occupancy sensor (up to 10)

•LutronR Radio Powr SavrT daylight sensor (up to 10)•LutronR PicoR wireless controllers (up to 10)

Wired Inputs

•Thereare4universalwiredinputs.Eachinputcanaccept one of the following:- LutronR EcoSystemR wallstations- LutronR occupancy sensors (LOS- series)- LutronR daylightsensors(EC-DIR-series)- LutronR EcoSystemRinfrared(IR)receivers(EC-IR,EC-DIR-series)

- LutronR Wired PicoR Controls•UseofboththeinfraredreceiveranddaylightsensorontheEC-DIR-seriessensorsisconsideredtwowired inputs on a QSM

•Maximumwiringdistance=150ft(46m)•Onlywired(LOS-series)andwirelessoccupancysensorsmaybeusedinmyRoomT; no EcosystemR wallstations, daylight sensors, EcosystemR IR receivers or wired PicoR controls

QS Link Limits

•The QS link can have up to 100 devices.•EachQSMcountsas1devicetowardsthe

100 device limit.•EachQSMdraws3PowerDrawUnits(PDUs)on

the QS link. •WiredsensorsaddtothePDUdrawofaQSM.RefertotheQSLinkPowerDrawUnitsspecificationsubmittal(LutronR P/N 369405) for information concerningPDUs.

•QSlinkmaximumwirerunlengthis2000ft(610m).•Seethecommercialsystemrulesspec(P/N369821)forsystemspecificlimitations.

® Specif icat ion Submittal page

Job Name:

Job Number:

Model Numbers:

QS Sensor Module QSM Sensor Interfaces

369242k 4 12.22.15

Mechanical Dimensions (All Models)Front View Side View Back View

(QSM2-4W-Cshown)

Mounted (-C Models) Mounted (-J Models)

1.17 in (30 mm)

Ceilingthicknessrangefor-CmodelsMin 0.30 in (8 mm) to Max1.20in(30mm)

Ceiling Ceiling

4.04 in (103 mm)

UseappropriateMudRingforceilingtilethickness

UseMudRingwithholespacingshownbelow.(Mud Ring not included with any QSM models)

Ceiling Ceiling

2.75 in (70 mm)

® Specif icat ion Submittal page

Job Name:

Job Number:

Model Numbers:

QS Sensor Module QSM Sensor Interfaces

369242k 5 12.22.15

Wiring: QS Link and Wired Inputs1

Input 11,2,3

Daylight sensor

EcoSystemR infrared (IR) receiver

Occupancy sensor

EcoSystemR wallstation or PicoRWiredControls

22 AWG to 14 AWG (0.5 mm2 to 2.0 mm2)

Lutron®CableStandard:C-CBL-522S-WH-1

Plenum:C-PCBL-522S-CLMax.WiredInputwire

length 150 ft (46 m)per input

22 AWG to 14 AWG (0.5 mm2 to 2.0 mm2) Lutron®CableStandard:C-CBL-522S-WH-1Plenum:C-PCBL-522S-CLMax.WiredInputwire length 150 ft (46 m)per input

22 AWG to 14 AWG (0.5 mm2 to 2.0 mm2) Max.QSlinkwire length 2000 ft (610 m)

Input 31,2

Input 21,2

QS Link

Input 41,2

Com

mon

V

+

MUX

MUX

Red

+20

–20V

+20

–20V

+20

–20V

+20

–20V

Bla

ckCOM–Com

mon

COM–Com

mon

COM–Com

mon

COM–Com

mon

Yello

wS1 –Signa

lS2–Signa

l

S4–Signa

lS3–Signa

lB

lue

or G

ray

Bla

ck

Red

Red

Red

Bla

ck

Bla

ck

Whi

te

Whi

te

1 Only on QSM models with wired inputs.2 Note: Forreferenceonly.Eachinputisuniversalandcanacceptanyoftheinputsshownabove.3OnlydaylightsensorsignalconnectedtoQSMshownabove.UseofIRsignalcountsasan

additional input on the QSM.

Back View (QSM2-4W-Cshown)

® Specif icat ion Submittal page

Job Name:

Job Number:

Model Numbers:

QS Sensor Module QSM Sensor Interfaces

369242k 6 12.22.15

Wiring: Device PowerSingle QSM powered by an ESN unit

Multiple QSMs powered by an ESN unit and a QS Link Power SupplyNote:AQSLinkPowerSupplymaybenecessaryifPDUsrequiredbyQSMsexceedavailablePDUsfromthedevice supplying power.

ESN unit

ESN unit

QSM QSM

COM

COM

COM

COM

COM

MUX

MUX

MUX

MUX

MUX

V+

V+

V+

V+

MUX

MUX

MUX

MUX

MUX

ESN unit

QSM A

The ESN unit powers QSM A; no terminal 2 connection betweenQSMAandQSLink Power Supply

The QS Link Power Supply powersQSMBandC;

QS Link Power Supply

QSM B

QSMC

MUXand_ occupy terminals 2 and 3 on the QS Link Power Supply.