Overview The QRF 5000 product family allows cable

operators to easily insert analog video(s) into existing digital cable networks. QRF5000-1(2) - One (Two) Channel Inserter QRF5010 - Two Channel Expansion QRF5200 - QAM Tuner/Filter QRF5000DQ-1(2) - Integrated Tuner/Inserter 1

(2)Ch. QRF5000-HD - High Definition insertion QRF5005 - ASI->QAM Modulator QRF5000/W - Wall Mount Package QRF5000/M - Mini Package

QRF5000-1 / QRF5000-2 One or two channel inserter Single Box Solution – Includes:

Encoder(s)QAMRF up-converterFront Panel LCDNetwork InterfaceRS-232 Interface

QRF5000-1 / QRF5000-2 (cont.)

Easy Connectivity

Connect PowerConnect Video and Audio Sources

Connect Expansion port (if used) Connect Output to Cable Network

Network Connectivity

Coupler

Notch *

QRF5000

Cable In

Cable Out

* Notch Required only if desired channel is currently utilized

QRF5010 Two channel daisy chain expansion

encoder Single Box Solution – Includes:

EncodersFront Panel LCDNetwork InterfaceRS-232 Interface

Expansion capability limited only by accumulated encoding bit rates and QAM rate

QRF5010 (cont.)

Daisy Chain for increased capacity

QRF5000

QRF5010

QRF5010

QRF5010

QRF5200 Digital QAM Tuner / Filter 57-861MHz Tuning Range 64 / 256 QAM capable Standard set-top box input range Add filters to create bandwidth for local

channels ASI output for direct connectivity into

QRF5000

QRF5200 Connectivity

QRF5200Cable In ASI output to QRF5000 / QRF5010

1. Connect Cable from plant to QRF52002. Tune QRF5200 to digital QAM channel3. Use QRF5200 to see active services4. Use QRF5200 to filter unwanted services to

create bandwidth for local insertion5. QRF5200 outputs directly to QRF5000 or

QRF5010

QRF5010QRF5010

System Connectivity Example

Cable In Cable Out

Notch Coupler

Coupler

QRF5200 QRF5000

1. Start with QRF5000 and set output frequency as desired2. Add QRF5010 expansions as needed3. Add QRF5200, set tuner frequency and filter out unwanted channels to create bandwidth for local insertion4. Connect to cable network as shown.

QRF5000DQ-1 / QRF5000DQ-2 Single Box solution combines:

Digital QAM TunerDigital Service FilterLocal Video / Audio Encoder(s)QAM ModulationAgile RF Up-conversion

Maintains ASI expansion port for adding more channels via QRF5010.

System Connectivity –QRF5000DQ

Cable InCable Out

Notch Coupler

Coupler

QRF5000DQ

1. Simplifies system connectivity by integrating multiple functions into one product.

2. Notch remains separate to maintain frequency flexibility3. Additional channels can still be added using QRF5010’s as

required.

QRF5000/W Wall Mount New Rugged Wall mount package

includes the following features:1 or 2 channels, with TunerMount for integrated notch filterIntegrated couplers and splittersOptional Integrated Bypass switchInput and Output test portsCable modem portLockable cabinet

QRF5000/W Wall mount

QRF5000/M Mini enclosure Cost effective, small enclosure 1 or 2 channels with tuner (DQ) optional Tiny, lightweight package - 7” x 3” x 9” Front Panel indicators

Power, Status, Alarm Network controlled and configured

QRF5000/W Wall mount

QRF5000 Configuration Front Panel RS232 Serial Interface Telnet REP Manager - Application GUI

QRF5000-HD High Definition digital insertion Single Box solution combines:

IEEE-1394 (Firewire) STB interfaceQAM ModulationAgile RF Up-conversion

System Connectivity –QRF5000-HD

Cable In

Cable Out

Notch Coupler

Coupler

QRF5000HD

1. Tune STB to High Definition channel for decryption.2. Connect IEEE-1394 port to QRF5000HD3. Modulate into system for clear channel HD distribution

STB

QRF5005 ASI – QAM Modulation Single Box solution combines:

Digital ASI interfaceQAM ModulationAgile RF Up-conversion

Front Panel Configuration 122x32 pixel Graphical LCD 7 control buttons 3 Bi-Color LED’s

Power Status Alarm

Full menu navigation and configuration capability

Password protected

REP Manager Discover Utility Remote Configuration Remote status monitoring Handles multiple units simultaneously Utilizes configuration files for saving and

loading system settings.

REP Manager – screen shots

Applications MDU-Gated Communities. High Rise Buildings College Campuses Hotels-Hospitalities PEG Channels

Specifications

Encoding: MPEG2 1-15Mbps CBR encoding range Composite or S-Video Inputs Variable PID selections

Modulation QAM 64/256 Annex A,B,C Adjustable Inter-leaver

RF Output Agile RF up-conversion 46-62dBmV output power 93-876MHz output frequency

Tuner 57-861MHz Tuning Range 64 / 256 QAM capable 0 dBmv nominal input +/- 12dB input range

Availability Contact factory for pricing and

availability

Radiant Communications, Inc.5001 Hadley Road

South Plainfield, NJ 07080(908) 757-7444www.rccfiber.com