Upload
edward-snelleman
View
227
Download
3
Embed Size (px)
DESCRIPTION
Description of QPI Group activities
Citation preview
+31(0)492 590059 www.qpigroup.com [email protected]
Total Care - Ontzorging - 全面护理 - Rundum-Versorgung
Printed Circuit Boards manufactured according stringent quality
requirements ISO 9001-2008
ISO TS16949
IPC A600 class 2
IPC A600 class 3
MIL-P-55110
MIL-P-50884
AS9100RoHs compliant
UL certified
• Q.P.I. Group
• Production /CAM
• Quality assurance
• Specifications
• Contact info
Printed Circuit Boards
+31(0)492 590059 www.qpigroup.com [email protected]
Total Care - Ontzorging - 全面护理 - Rundum-Versorgung
Q.P.I. Group Quality Products International (Q.P.I.) was founded in 1988 in the Netherlands by two Printed Circuit Board (PCB)
experts, who believed that the performance in this industry needed to change in the way in which the business
processes took place. Q.P.I.'s trademark during the first few years was quality, speed and service. Right from the
start, Q.P.I. worked on a paradigm change in the way of thinking about lead times.
In the early nineties in particular, Q.P.I. grew rapidly and developed more and more into a technology company,
which developed and industrialised pioneering interconnection technologies for many clients. Simultaneously,
investments were made in a metallurgy lab.
Q.P.I. head office in the Netherlands
In 1996 Q.P.I. started with its EDA activities. Meanwhile multiple programs are used from Mentor Graphics, Zuken,
Cadence and Altium. In 1998 Q.P.I. opened a model-shop to offer quick-turn, hand mounted, assembled
prototypes. In 2005 Q.P.I. opened a branch in Belgium.
In 2010 the Q.P.I. Group opened it facilities in Nanshan, Shenzhen, China including a laboratory for PCB
investigation.
In 2012 a trading organisation was established in Hong Kong for direct shipment for customers in Europe, Asia and
the Americas.
Now the Q.P.I. Group has evolved into a technology house for advanced interconnection technologies and into a
one-stop-shop for the controlled development and production of Printed Circuit Boards from the idea phase,
through the development phase and onto mass production. Q.P.I.'s trademark of the first few years, quality,
speed and service, is still Q.P.I.’s trademark today.
The Q.P.I. branch in Shenzhen located in Shekou,
easy to reach from outside China and in the
middle of an area with a concentration of PCB
manufacturing companies.
The Q.P.I. branch can easily reached from the HK
airport by using the ferry from the airport to Shekou.
+31(0)492 590059 www.qpigroup.com [email protected]
Total Care - Ontzorging - 全面护理 - Rundum-Versorgung
Production Q.P.I., as IPC member, offers printed circuit boards made according IPC A600
class 2 or 3 under stringent process conditions. The PCB are conforming UL
certification, RoHS and/or ISO TS 16949. Also MIL-P-55110 and MIL-P-50884
approved PCBs are possible. All our PCB’s are 100% electrically tested
The manufacturing processes are qualified according ISO14001.
Q.P.I. is focussed to supply always the most optimal product solution for its
customers. To guarantee the best technical solution and the highest quality
Q.P.I. divided the PCB products in several market segments:
Rigid
• Prototypes
• Mid volumes
• Large volumes
Flex-rigid
• Prototypes
• Mid volume
Flex
• Prototypes
• Mid volumes
CAM Q.P.I. makes use of Genesis 2000 both in its Dutch facility and Chinese
facility. The jobs are evaluated inspected and engineered by either the CAM
department in Netherlands or China. As both CAM departments make use of
identical tools this speeds up the CAM process. In case of technical questions
the customer will be contacted for clarification of the issue and to resolve the
issue assuring that the most optimal process conditions can be used to
manufacture the PCB, thus assuring the highest quality.
The Q.P.I. Group makes use of Navision as ERP system, all offices therefore
have full access to the information at all times.
In case of special specification requirements the CAM department will take
those into account. This can be on product but also on customer base. Q.P.I.
issues in the later a specific customer specification, to assure that.
+31(0)492 590059 www.qpigroup.com [email protected]
Total Care - Ontzorging - 全面护理 - Rundum-Versorgung
Quality assurance process
• One time release process
• Regularly audits; process and products
• Outgoing quality checks on all shipments
Q.P.I. is for more than 25 years active in the development and supply of printed circuit boards. For over 10
years Q.P.I. has been active in Asia and since 2010 Q.P.I. has its own branch in Shenzhen.
Qualification of the production is for Q.P.I. of utmost importance. Only with the use of well-designed
processes optimal quality products can be realized. As part of the release products have been carefully
analysed by our quality engineers. The production is regularly audited.
Inspection data is statistically analysed to signalize trends in the production.
Customer Support
Laboratory
Rele
ase
pro
cess
Periodic
al
Audits
PCB
Production
Outgoing Control
Shipment Optional
Warehousing Customer
+31(0)492 590059 www.qpigroup.com [email protected]
Total Care - Ontzorging - 全面护理 - Rundum-Versorgung
Packaging The printed circuit boards are packed in vacuum sealed plastic. For flex product an alternative will be
chosen based on the type of product. All products will be packed in an airworthy, neutral coloured,
corrugated boxes, respecting maximal weights per single box for easy handling.
In case of special wishes those likely can be honoured.
Special wishes Q.P.I. wants to be a real customer oriented company and its therefore open to any specific request.
The Q.P.I. engineers can assist in adapting designs for optimal functionality, can advise the most
appropriate build-ups or advice in the choice of base materials. The Q.P.I. engineers do have many years
of experience in de design of PCBs, developing the technology and the manufacturing of PCBs.
For any request you can contact: [email protected].
Q.P.I. Laboratories
The Q.P.I. laboratories are equipped to do complete analyse of the PCBs’. Among others equipment to
make cross-sections, callipers for mechanical measurements and thickness measurement, optical
inspection systems and microscopes. In its Dutch facility Q.P.I. has among others a Fischerscope XRAY
for surface finish inspections and 3D X-ray for non-destructive quality investigations. For life time and
quality investigations temperature and temperature-shock cabinets are available.
Inspection in-line, both product and process, is crucial to guarantee the product quality. Nevertheless is
outgoing inspection important to make sure that the product is in full compliance with the specification.
All the boards are electrically tested before the leave the production.
Q.P.I. has laboratories in both its facilities in the Netherlands and China.
+31(0)492 590059 www.qpigroup.com [email protected]
Total Care - Ontzorging - 全面护理 - Rundum-Versorgung
Capabilities
Q.P.I. will always strive to provide its clients with the products and technologies which they require. Should
these products not already exist, Q.P.I. will develop them or develop them in cooperation with others. The
following list gives an impression of the technologies and options which are available "off the shelf" for the
manufacture of PCBs.
Dimensions / Thickness / Layer count Rigid multi-layer
- Max. board size 1199 mm x 600 mm (47,2”x23,6”)*
- Max. thickness 8,0 mm (0,31”)
- Max. layer count rigid 54 Layer
Rigid Flex circuits - Max. board size 571 X 419 mm (22,5” x 16,5”)*
- Max. thickness 5,0 mm (0,20”)
- Max. layer count rigid 30 layers
Flex circuits - Max. board size 673 mm x 495 mm (26,5”x19,5”)*
- 2 Layer flex circuits up to 12000mm (480”)
- Max. layer count flex 12 layer
*special sizes upon request
Printed Circuit Board Types - Single layer - Double layer
- Multilayer rigid
- Flex (Multilayer)
- Rigid-Flex (Multilayer)
- IMS
- Al Core
- Impedance controlled
- P.T.F.E.
- 3 Dimensional Heatsink
- H.D.I.
- V.H.D.I.
- Combined builds (par example
PTFE/Fr-4, Nonferrous, Metal Core,
PTFE / Polyimide)
Materials - CEM 3
- Fr-2
- Fr-4
- Fr-4 Mid TG
- Fr-4 Hi TG
- Halogen Free
- Teflon (Rogers®, Taconic®, Arlon®)
- Polyimide (Arlon®, Nelco®)
- Polyester
- Thermount
- Flex polyimide (Rogers®, Dupont®,
Espanex®, Panasonic®, Tayflex®)
- Ceramic
Solderable finishes
- Hot air solder level (HAL Pb)
- Hot air solder level (HAL Pb
free)
- Immersion Ni/Au (Enig)
- Immersion Ni/Pd/Au
(universal finish)
- Immersion Sn
- Immersion Ag
- Entek (OSP)
- ASIG
- Palladium
- Electrolytic NiAu (min. track/gap 100µm)
- Electrolytic silver over copper
- Au (soft gold, bondable)
- Carbon ink
- Gold edge connector
Via options
- Through hole via
- Laser drilled via
- Buried via
- Blind via
- Copper filled via
- Resin filled via
- Resist filled via
- Via on via
- Plugged via
+31(0)492 590059 www.qpigroup.com [email protected]
Total Care - Ontzorging - 全面护理 - Rundum-Versorgung
Controlled impedance - Surface micro strip
- Embedded micro strip
- Coated micro strip
- Edge-coupled surface micro strip
- Edge-coupled embedded micro strip
- Edge-coupled coated micro strip
- Symmetrical strip line
- Offset strip line
- Edge-coupled Symmetrical strip line
- Edge-coupled offset strip line
- Broadside-coupled strip line
Impedance tolerance 10% , 5%
Solder resist Electrical test Solder resist colour options: Green, Red,
Blue, Yellow, Black, White
- Flying probe
- Dedicated (bed of needles) fixture test
High voltage test optional
Tolerances
Profile tolerance +/- 100 µm 4 mil
Hole tolerance +/- 50 µm 2 mil
Positional tolerance +/- 25 µm 1 mil
Lamination tolerance +/- 200 µm 8 mil
Scoring tolerance
(Min. distance of copper to the middle of the scoring line
700µm (27,5µinch))
+/- 100 µm 4 mil
Track width tolerance +/- 10 µm 0,4 mil
Solder resist positional tolerance +/- 75 µm 3 mil
Copper foil thicknesses
2 µm* 35 µm 1 Oz
5 µm* 70 µm 2 Oz
9 µm 105 µm 0,25 Oz 3 Oz
12 µm 140 µm 0,4 Oz 4 Oz
18 µm 210 µm 0,5 Oz 6 Oz
*Special Special constructions optional
PCB Features/Design rules
Standard HDI VHDI
µm mil µm mil µm mil
Track 100 4 75 3 20 0,8
Gap 100 4 75 3 20 0,8
Min. Drilled hole 250 10 75 /125 3/5 50 2
Aspect ratio 12:1 12:1 12:1 12:1 16:1 16:1
Aspect ratio blind via 1:1 1:1 1:1 1:1 1:1 1:1
Aspect ratio micro blind via 1:1 1:1 1:1 1:1 1:1 1:1
Min. Pad Through hole 500 20 450 18 350 14
Min. Micro via pad 250 10 250 10 225 9
Track to PTH 200 8 150 6 110 4,3
Track to NPTH 225 9 225 9 150 6
+31(0)492 590059 www.qpigroup.com [email protected]
Total Care - Ontzorging - 全面护理 - Rundum-Versorgung
Contact info
Q.P.I. Group B.V.
Schootense Dreef 27
5708 HZ Helmond
The Netherlands
Tel.: +31 (0)492 590059, 200
Email: [email protected]
Email Quotation request: [email protected]
Email Purchase orders: [email protected]
Email Accounting: [email protected]
Email CAM department: [email protected]
Email Quality department: [email protected]
Q.P.I. PCB (Shenzhen) Co. Ltd.
Q unit 8th floor, Gangwan Creative Bld., 1041#Houhai Ave, Shekou, Shenzhen, Guangdong, China
Q.P.I. PCB (Hong Kong) Ltd.
visiting address: Q unit 8th floor, Gangwan Creative Bld., 1041#Houhai Ave, Shekou, Shenzhen,
Q.P.I. makes it easy for you to buy good quality PCBs for reasonable cost.
Technical and organizational qualifications and the full technical support
guarantees that you always get the most optimal solution.
Q.P.I. just makes your life a bit easier when buying PCBs.
Q.P.I. makes it easy ©
Q.P
.I.
Gro
up 2
015 S
ubje
ct
to c
hange w
ithout
notice,
All t
radem
ark
s r
ecogniz
ed