5
TRANSCEIVER, UP/DOWN CONVERTER 4.0 8.0 GHz (Datasheet Rev -) Product Description This product is a highly configurable 4.0GHz to 8.0GHz frequency converter. It supports independent upconversion/downconversion or transceiver applications. It is programmed via a Windows-based soft front panel or custom program using the supplied API manual. User settings are stored in nonvolatile memory and recalled at power-up, enabling applications in target systems without a host computer. Two internal 4.0GHz to 8.0GHz PLOs alleviates the need for external LO sources. The primary PLO is capable of sourcing both the upconvter and downconverter in transceiver applications. The secondary PLO supports independent upconverter and downconverter applications that require different LO frequencies. The secondary PLO along with internal DACs and ADCs allows for automated LO nulling across the entire 4.0GHz to 8.0GHz operating range. Figure 1: Functional diagram.

QD Series Datasheet - Polyphase Microwave · 2018. 11. 1. · 10 MHz -140.31 -141.08 -140.83 -127.81 -141.03 100 MHz -141.14 -142.09 -141.88 -136.63 -143.41. Title: QD Series Datasheet

  • Upload
    others

  • View
    4

  • Download
    0

Embed Size (px)

Citation preview

  • TRANSCEIVER, UP/DOWN CONVERTER

    4.0 – 8.0 GHz

    (Datasheet Rev -)

    Product Description

    This product is a highly configurable 4.0GHz to

    8.0GHz frequency converter. It supports

    independent upconversion/downconversion or

    transceiver applications. It is programmed via a

    Windows-based soft front panel or custom

    program using the supplied API manual. User

    settings are stored in nonvolatile memory and

    recalled at power-up, enabling applications in

    target systems without a host computer. Two

    internal 4.0GHz to 8.0GHz PLOs alleviates the

    need for external LO sources. The primary PLO

    is capable of sourcing both the upconvter and

    downconverter in transceiver applications. The

    secondary PLO supports independent

    upconverter and downconverter applications

    that require different LO frequencies. The

    secondary PLO along with internal DACs and

    ADCs allows for automated LO nulling across

    the entire 4.0GHz to 8.0GHz operating range.

    Figure 1: Functional diagram.

  • 2 of 5

    Specifications

    I/Q Modulator Parameter Test Condition Min Typ Max Units Notes

    Input Impedance Single Ended 50 Ω

    Differential 100 Ω

    Baseband Filter Bandwidth < 3dB Flatness 700 MHz Can use any Mini-Circuits LFCN series filter

    Baseband Filter Stop Band > 30dB Attenuation 900 MHz

    Conversion Loss External LO -6 -11 -14 dB Measurement taken with external hybrid

    coupler Internal LO TBD dB

    Sideband Suppression External LO -40 -35 dBc Measurement taken with external hybrid

    coupler Internal LO TBD dBc

    P1dB 6.6 dB

    LO Leakage at RF Port -60 -30 dBm

    RF Digital Attenuator 0 31.5 dB

    I/Q Demodulator Parameter Test Condition Min Typ Max Units Notes

    Input Impedance Single Ended 50 Ω

    Differential 100 Ω

    Baseband Filter Bandwidth < 3dB Flatness 500 MHz Can use any Mini-Circuits LFCN series filter

    Baseband Filter Stop Band > 30dB Attenuation MHz

    Conversion Loss External LO -6 -11 -14 dB Measurement taken with external hybrid coupler Internal LO TBD dB

    Sideband Suppression External LO -40 -35 dBc Measurement taken with external hybrid

    coupler Internal LO TBD dBc

    P1dB 9.6 dB

    LO-RF Isolation -40 -30 dBm

    RF Digital Attenuator 0 31.5 dB

    Modulator, Demodulator and Transceiver External LO Inputs Parameter Test Condition Min Typ Max Units Notes

    Frequency Range 4.0 8.0 GHz

    Input Power 5 7 9 dBm

    Input Impedance 50 Ω

    Power Parameter Test Condition Min Typ Max Units Notes

    Positive DC Supply 1 Voltage 6.2 VDC

    Negative DC Supply 1 Voltage -6.2 VDC

    Positive DC Supply 1 Current 1200 mADC

    Negative DC Supply 1 Current 20 mADC

    Positive DC Supply 1 Power 7440 mW

    Negative DC Supply 1 Power 124 mW

    Positive DC Supply 2 Voltage 4.1 VDC

    Negative DC Supply 2 Voltage -4.1 VDC

    Positive DC Supply 2 Current 700 mADC

    Negative DC Supply 2 Current 250 mADC

    Positive DC Supply 2 Power 2870 mW

    Negative DC Supply 2 Power 1025 mW

    Weight and Dimensions Parameter Test Condition Value Units Notes

    Weight 8 oz

    Dimension – (L, W, H) 4.9 x 3.7 x 0.6 in

    Connectors – RF, I/Q, 10MHz SMP Full Detent

    Power Molex Mi ll Locking, 1.25mm pitch

    Communication Molex Pico-Clasp Locking, 1.00mm pitch

  • 3 of 5

    Typical Performance Characteristics

    Upconverter External LO = +7 dBm, LO Leakage Nulled at 5500MHz.

  • 4 of 5

    Downconverter External LO = +7 dBm

  • 5 of 5

    LO Synthesizer Phase Noise

    Dimension Drawing

    Carrier (GHz) 4.0 5.0 6.0 7.0 8.0

    Carrier Power (dBm) 14.7 15.3 15.5 14.8 12.5

    Offset

    100 Hz -64.60 -62.41 -60.51 -59.76 -59.65

    1 kHz -85.20 -82.37 -81.83 -81.43 -77.69

    10 kHz -86.41 -81.16 -80.74 -76.68 -77.59

    100 kHz -111.21 -109.46 -106.88 -103.25 -105.95

    1 MHz -125.15 -125.78 -125.12 -124.38 -125.14

    10 MHz -139.30 -140.95 -141.03 -128.17 -140.28

    100 MHz -140.69 -141.81 -141.67 -136.29 -143.20

    Carrier (GHz) 4.0 5.0 6.0 7.0 8.0

    Carrier Power (dBm) 14.7 15.3 15.4 14.9 12.5

    Offset

    100 Hz -77.64 -75.74 -73.99 -73.34 -71.82

    1 kHz -77.29 -75.47 -76.62 -73.81 -72.05

    10 kHz -79.78 -76.24 -74.27 -72.89 -73.71

    100 kHz -109.55 -105.43 -105.15 -102.08 -103.84

    1 MHz -125.73 -125.96 -125.10 -124.52 -123.29

    10 MHz -140.31 -141.08 -140.83 -127.81 -141.03

    100 MHz -141.14 -142.09 -141.88 -136.63 -143.41