QCon Pro X - Firmware release notes Device Model: QCon Pro X Release date: 7 Aug, 2019 Firmware Version: V2.02 Who needs to upgrade: All users Upgrade fix/Feature added: 1. LED Meter display Fix (Hanging LEDs from sharp volume) 2. Initial fader calibration values changed to 180 Note: Please make sure iMap V2.16 or above is being used to install any firmware V1.17 or later. Please refer to the attached images for changed DAW overlays

Update footprint Version Release date Feature added or bug fix V1.00 18th Aug., 2016 First release. V1.06 22nd June, 2016 Fixed the jog wheel function on ProTools. V1.07 13rd Sep., 2016 Added and fixed several functions on Logic Pro and Studio One Upgrade fix/Feature added:

1. Added 8 x “Global View” features for Logic Pro mode : - MIDI Tracks - Inputs - Audio Tracks - Audio Instruments - Aux - Busses - Outputs - User (Note: Please refer to the attached image for the control button changes)

2. Fixed: Level metering issue on Studio One V1.08 26th Nov., 2017 Upgrade fix/Feature added: Added feature functions for Cubase and StudioOne a) Added: Added multiple control functions for Studio One (Note: Please refer to the attached image for changed control buttons) b) Fixed: Cubase compatibility issue for Cubase 8.0 or above c) Fixed: Samplitude SMPTE time display issue V1.09 a) Added fader calibration function (Note: Please refer to calibration procedure below) b) Fixed button LED issue with some DAW c) Fixed latency issue in ProTools

d) Fixed level metering and Pan LED issue in Samplitude ProX V1.12 Upgrade fix/Feature added: a) Fixed “Solo” button LED on Reaper b) Added “Save” procedure on the fader calibration process. V1.13 Improved functionality on Bitwig including Master Level metering and the lower LCD display etc. Please install the new scripts into Bitwig according to next page instruction shown.

V1.14 30th August, 2017 Upgrade fix/Feature added: a) Improved some more functionality on Bitwig

including function buttons LED etc. b) Widened the individual fader speed value

adjustment range. V1.15 30th August, 2017 Upgrade fix/Feature added: a) Improved the “Solo” functionality on Reaper. b) Added “User A” & “User B” functions on Studio One. V1.17 28th Sep., 2018 Equipped with Universal Mackie Control and HUI modes for universal DAW compatibility. Note: Please make sure iMap V2.16 or above is being used for the firmware V1.17 or later. Please refer to the attached images for changed DAW overlays V1.18 6th Nov., 2018 a) Improved “Flip” function in LogicPro b) Added “Insert” function in HUI mode V2.00 26th Dec., 2018 Improved the Pan surrounding LED accuracy V2.01 15th May, 2019 Added User adjustable A and B values Fader calibration process procedure: 1. Press and hold channel 2’s “Rec” button while switching on the power to enter fader

calibration mode. The upper LCD should display values for each channel’s fader calibration

2. Note the current value. 3. Rotate corresponding channel knob clockwise to increase or counter-clockwise to

decreased the fader power. 4. To increase the master fader power press the 7th channel’s “Sel” button or press the

8th channel’s “Sel” button to decrease it. (Please refer to the “Fader Calibration procedures” for details) 5. After finding the desired settings, press channel 8’s encoder to save all the setting

values and the QCon Pro X will exit calibration mode automatically. (No need to power off and on the device)