Upload
others
View
9
Download
0
Embed Size (px)
Citation preview
QA3 Emergency Trolley SystemsAneticAid QA3 Emergency Trolley Systems
Robustly built and ergonomically designed, this range of patient trolleys incorporates features that make it an ideal choice for A&E departments in any acute care facility.
The range consists of four models – QA3 Emergency Trolley, QA3 Drive Emergency Trolley, QA3 Powered Emergency Trolley and QA3 Drive Powered Emergency Trolley.
Standard Features
• Full length radiolucent mattress support deck with exceptional X-Ray access – suitable for both digital and traditional plates
• Full length moulded plastic side rails drop down below the mattress support surface to allow unimpeded access for patients and virtually no gap when laterally transferring to or from a bed. Raising and lowering the side rails is almost effortless due to the counterbalanced pivot mechanism controlling movement.
• Hydraulic assist height adjustment, using foot controls, accessible from both sides of trolley; exceptional low height for easy and safe patient access
• Two permanently attached collapsible two stage IV poles, one at the head end and the other at the foot end of trolley.
• Hydraulic assist Trendelenburg function operated from hand control at side of trolley
• Gas assist backrest function, activated from hand control behind patient’s head
• 5th wheel steering significantly improves manoeuvrability and is engaged using foot pedal at the rear of trolley
• Ergonomically positioned fold down push handles, at the head end, plus another set of fixed push handles behind the backrest reduce effort required when manoeuvring trolley during patient transfers
• K8 pressure care mattress consisting of dual layer of hospital grade foam, with a viscoelastic memory foam top layer for additional pressure relief; mattress enclosed in a latex-free, breathable, vapour permeable 4 way stretch PU cover, with RF welded seams, for improved infection control
• Central locking brakes accessed from both sides of trolley, front and rear
• Oxygen cylinder storage troughs moulded into both sides of ABS plastic cover over trolley base
• Rotating buffers on all four corners of trolley
• 320kg SWL
QA3EMERGENCY TROLLEY
Attendant-propelled A&E patient trolley.
No additional features
CHOOSE FROM FOUR
MODELS
QA3 DRIVEEMERGENCY TROLLEY
Attendant-controlled A&E patient trolley combining the standard features with the motorised 5th wheel traction drive system.
QA3 POWEREDEMERGENCY TROLLEY
Attendant-propelled A&E patient trolley combining the standard features with the additional powered deck profiling functions and electric height adjustment.
Additional features• Innovative touch sensitive DRIVE handles are used to
activate the traction drive system. One DRIVE handle is located on each side of the mattress support deck, at the head end, while another pair are attached to rear of the backrest. Simply pushing on the handles triggers forward motion while gently pulling back engages reverse drive. Letting go of the handles altogether stops the trolley
• ‘E’ stop button located below LED display
• Designed to handle gradients up to 10O
• On/Off switch, plus LED display indicating battery charge status, are located at head end of mattress support frame
Additional features• Electric height adjustment
• Electrically powered backrest
• Electrically powered CPR function
• All powered functions operated from the Attendant Control Panel at the foot end of the mattress support frame. Also incorporates an On/Off switch plus LED display indicating battery charge status.
• Motorised 5th wheel - lowered to the floor using foot pedal at the rear of trolley
• When switched off, the traction drive system functions as a conventional 5th wheel
• Long life battery – up to 22 kilometres on a single charge
DRIVE Handles
Attendant Control Panel
QA3 DRIVE POWEREDEMERGENCY TROLLEY
Top of the range attendant-controlled A&E patient trolley, combining the standard features with a motorised 5th wheel traction drive system, the powered deck profiling functions and electric height adjustment.
Additional features• Motorised 5th wheel - lowered to the floor using foot pedal
at the rear of trolley
• Innovative touch sensitive drive handles are used to activate the traction drive system. A drive handle is located on each side of the mattress support deck, at the head end, while a second pair are attached to rear side of the backrest. Simply pushing on the handles triggers forward motion while gently pulling back engages reverse drive. Letting go of the handles altogether stops the trolley
• On/Off switch, plus LED display indicating battery charge status, located at head end of mattress support frame
• ‘E’ stop button positioned below LED display
• Long life battery – up to 22 kilometres on a single charge
• Designed to handle gradients up to 10º
• When switched off, the traction drive system functions as a conventional 5th wheel
• Electric height adjustment
• Electrically powered backrest
• Electrically powered CPR function
• All powered deck profiling functions operated from the Attendant Control Panel at the foot end of the mattress support frame. Also incorporates an On/Off switch plus LED display indicating battery charge status.
DRIVE Handles
Attendant Control Panel
Attribute/Function
Dimensions
QA3 Emergency Trolley
QA3 Drive Emergency Trolley
QA3 Powered Emergency Trolley
QA3 Drive Powered Emergency Trolley
Product Code CFAA-21120 CFAA-21122 CFAA-21126 CFAA-21124
Overall dimensionsSide rails up 215cm long x 83.5cm wide
Side rails down 215cm long x 73.5cm wide
Height range 53.5cm min to 83.5cm max (excluding mattress)
Backrest range of movement 0O to 90O
Single castor size 15cmØ
Trolley weight 148kg 157kg 154.5kg 162.5kg
SWL 320kg
Storage Receptacle
Refreshment Tray
Monitor ShelfSide Rail - Endoscopy Demi-Frame
Oxygen Cylinder BracketFoot End Extension
Product Code Description
CFAA-22160 QA3 800 – includes 80cm wide mattress support platform + 80cm wide K8 Pressure Care Mattress
CFAA-21132 20cm Ø single castors
CFAA-21135 Reverse Trendelenburg function
CFAA-21138 Maximum height increased by 10cm
CFAA-21161 Additional IV pole, fixed
CFAA-21191 Storage receptacle for patient’s belongings
CFAA-21393 Oxygen cylinder (C/D size) bracket with backing plate
CFAA-21152 Monitor Shelf with removable Refreshment Tray
CFAA-21152-A1 Refreshment Tray only
CFAA-21153 QA3 Foot End Extension with 10cm pad
CFAA-21165 QA3 Side Rail, Endoscopy Height Extension Demi-frame
CFAA-21172 QA3 Side Rail Covers, Grey (pair)
CFAA-21173 QA3 Side Rail Covers, Child Print (pair)
CFAA-21188 Theatre Pillow with QA3 Mattress Retention Strap
CFAA-21390 Push/Pull Bar
CFAA-21159 Paper Roll Holder (up to 62cm wide) - universal
CFAA-21192 QA3 Lateral Cassette Holder
CFAA-21195-A1 QA3 Emergency Trolley Radiographic Cassette Carrier Tray
CFAA-21195-B1 QA3 Emergency Modified Axial (Wallace) View Support
CFAA-21195-C1 QA3 Emergency Trolley X-Ray Cassette Support Shelf
OPTIONAL FEATURES/ACCESSORIES
BA CF MH
Grey Rail Covers
NOTE: Bariatric Build Option – Extra wide QA3 Stretcher deck + mattress (CFAA-22160)Includes 80cm wide mattress support platform and 80cm wide K8 Pressure Care Mattress
JDH
G05
1120
-v1
To place a purchase order, contact us today:[email protected] | 1300 791 404