Embed Size (px)
Citation preview
Q I P
QUALITY IMPROVEMENT PROGRAMME Advance Admission to Ph.D. Programme for the
Academic year 2019-2020 (Final Admission: 2020-2021)
(for the Full Time/ Permanent Faculty of AICTE approved Degree Level Engineering Institutions)
INFORMATION BROCHURE Sponsored by
All India Council for Technical Education (A Statutory Body of Government of India)
Admission coordinated by
Principal Coordinator QIP
Quality Improvement Programme
Indian Institute of Technology Delhi
Hauz Khas, New Delhi – 110 016
Both online and hardcopy of the application are required for processing.
Single version of the application will not be considered.
DATES TO REMEMBER
Access to online submission of
application/s
September 17th, 2018
(Monday)
Closing of online application/s
access
October 15th, 2018
(Monday) 17:00 hrs
Last date for receipt of duly
forwarded application/s along-
with enclosures
October 29th, 2018
(Monday)
Dear Prospective QIP Scholar
Your interest in the Quality Improvement Programme (QIP) sponsored by AICTE is appreciated. The main objective of the programme is to upgrade the expertise and capabilities of faculty members of the AICTE approved degree-level engineering institutions. The programme launched by the Government of India in the year 1970, is now being implemented and monitored by the National QIP Coordination Committee, funded through AICTE.
There are three main activities under QIP scheme for the faculty of degree-level engineering institutions: Providing opportunities to teachers of the degree-level engineering institutions to improve their qualifications by offering
admissions to M. Tech and Ph. D. degree programme.
Organizing Short Term Courses at the QIP Centres for serving teachers in various emerging areas of technology & research.
Curriculum Development Cell activities which help to improve the class room teaching and learning.
Nine major QIP centres at IIT and IISc undertake the various activities listed above. Admission to M.Tech & Ph.D programme are also
offered in selected areas in institutions recognized as Minor QIP centres. A large number of teachers from engineering institutions from all
over the country have pursued M. Tech and Ph. D. degree programme under this scheme. These are aimed at improving the standard and
quality of technical education through improvement in the qualifications of the faculty members of the various engineering institutions.
In the past, a Curriculum Development Cell was also set-up at major QIP Centres for improving the effectiveness of technical education in the country. Its activities included curriculum development and revision or preparation of monographs, textbooks, teachers’ manuals,
teaching aids and other resource materials, examination reforms, organizing inter-institutional programs, seminars, workshops and panel
discussions, development of educational technology, creation of methodologies for formal and informal trainings, technical education of
the handicaps, etc. A number of short term courses have also been organized by major QIP Centres for the benefit of the faculty members of Engineering Institutions across the country.
The QIP websites http://cepqip.iitd.ac.in, www.qip.iitb.ac.in, www.iitbhu.ac.in/qip, http://www.iitg.ac.in/cet/qip.html, www.iitk.ac.in/qip,
http://cce.iitm.ac.in, www.qip.cce.iisc.ernet.in, www.cep.iitkgp.ac.in/cep/, www.iitr.ac.in, and www.aicte-india.org will give you necessary
information about the programme as well as about the requirements and the procedure to apply for admission in M.Tech & Ph.D degree
programme. The details of the disciplines and specializations available at various centres are listed on the website and also available in the
admission brochure to enable you to make appropriate choices. You can navigate through the links on the left hand side of the main web
page for admission and can download the admission brochure.
Access to the online submission of application opens on September 17th, 2018 (Monday). The last date for the online submission of the
application is October 15th, 2018 (Monday) 17:00 hrs. Please note that the last date is October 29th, 2018 (Monday) for the receipt of the
hard copy of application at the office of the Principal Coordinator, QIP, Office of Quality Improvement Programme (QIP/CEP),
Vishwakarma Bhawan, 1st Floor, Wing-B, Indian Institute of Technology Delhi, Hauz Khas, New Delhi – 110 016, Email:
The procedure of admission under QIP involves the following steps:
Scrutiny of all applications in the office of the Principal Coordinator QIP.
Short-listing by the QIP centres for interviews and dispatch of call letters to those selected for interviews.
Recommendations by the QIP centres to NQCC.
Final selection by the National QIP Coordination Committee (NQCC) and
Offer of Admission by the Institution where the final selection has been recommended by NQCC.
The schedule of interviews at various QIP Centres is given in the brochure, so that you can plan your travel for attending/appearing the
interviews at places of your choice. For further information about the QIP, the application form or any associated item, you may contact to
the Principal coordinator QIP or any of the Coordinators of the QIP Centres listed in the website or brochure.
For further information about a particular institution or a particular department therein, you may directly write to the Head of concerned
department or the QIP Coordinator of the institution.
The website {http://cepqip.iitd.ac.in} will be updated periodically at each of the timelines. Please visit this website periodically to check for
updates in the application and selection process.
Wish you all the best
Prof. Mahim Sagar
Principal Coordinator QIP
Office of QIP/CEP,
IIT Delhi.
TABLE OF CONTENTS
Sl.
Nos. Details
Page
Nos.
I. General Information 1
II. Institutions offering Ph.D degree programme under QIP and their codes 2-5
III. Codes for Departments offering Ph.D degree programme at various institutions 6-9
IV. Eligibility Criteria 10
V. Advance Admission Scheme 10
VI. Living Expenditure Allowance and Contingency Grant 10
VII. Conditions for Admission 10
VIII. Instructions for Completing the Online Application 11
IX. Application Fee 12
X. Checklist for each copy of the Application Form 12
XI. Instructions for Dispatching 13
XII. Last Date 13
XIII. Procedure for Admissions under QIP 13
XIV. Schedule of Interviews for Admission to Ph.D Degree Programme under QIP 14-15
XV. Departments and Fields of Specialization at Various Institutions 15
1. Indian Institute of Science, Bangalore (Karnataka) 16-20
2. Indian Institute of Technology Bombay, Mumbai (Maharashtra) 21-31
3. Indian Institute of Technology Delhi, New Delhi (New Delhi) 32-36
4. Indian Institute of Technology Guwahati, Guwahati (Assam) 37-38
5. Indian Institute of Technology Kanpur, Kanpur (Uttar Pradesh) 39-42
6. Indian Institute of Technology Kharagpur, Kharagpur (West Bengal) 43-47
7. Indian Institute of Technology Madras, Chennai (Tamil Nadu) 48-54
8. Indian Institute of Technology Roorkee, Roorkee (Uttarakhand) 55-60
9. Indian Institute of Technology (BHU),Varanasi (Uttar Pradesh) 61-62
10. Alagappa Chettiar Government College of Engg. and Technology, Karaikudi, (Tamil Nadu) 63
11. Anna University, Chennai (Tamil Nadu) 63
12. Basaveshwar Engineering College, Bagalkot (Karnataka) 64
13. B.M.S. College of Engineering, Bangalore (Karnataka) 64
14. Coimbatore Institute of Technology, Coimbatore (Tamil Nadu) 64
15. College of Engineering Trivandrum Thiruvananthapuram (Kerala) 65
16. College of Engineering, Pune (Maharashtra) 65-66
17. College of Technology & Engineering (MPAU), Udaipur (Rajasthan) 67
18. Delhi Technological University, Delhi (Delhi) 67-68
19. Giani Zail Singh Campus College of Engineering. & Technology, Bathinda (Punjab) 68-69
20. Government College of Engineering, Amravati (Maharashtra) 69
21. Govt. College of Engineering, Aurangabad (Maharashtra) 69
22. Govt. Engineering College, Thrissur, (Kerala) 70
23. Govt. Engineering College, Salem (Tamil Nadu) 70
24. Guru Nanak Dev Engineering College, Ludhiana (Punjab) 70
25. Harcourt Butler Technological Institute, Kanpur (Uttar Pradesh) 70-71
26. Indian Institute of Engineering Science and Technology, Shibpur (West Bengal) 71
27. Indian Institute of Technology (Indian School of Mines), Dhanbad (Jharkhand) 71-72
28. Indira Gandhi Institute of Technology, Sarang (Odisha) 72
29. Jadavpur University, Kolkata (West Bengal) 72-73
30. Jamia Millia Islamia, University, New Delhi (New Delhi) 74
31. Kamla Nehru Institute of Technology, Sultanpur (Uttar Pradesh) 74
32. Madan Mohan Malaviya University of Technology, Gorakhpur (Uttar Pradesh) 74-75
33. Madhav Institute of Technology & Science, Gwalior (Madhya Pradesh) 75
34. Manipal Institute of Technology, Manipal (Karnataka) 75-76
35. Malaviya National Institute of Technology, Jaipur (Rajasthan) 76-77
36. Motilal Nehru National Institute of Technology, Allahabad (Uttar Pradesh) 78-79
37. National Institute of Foundry and Forge Technology, Hatia, Ranchi (Jharkhand) 80
Sl.
Nos. Details
Page
Nos.
38. National Institute of Technology, Agartala (Tripura) 80
39. National Institute of Technology, Calicut (Kerala) 81
40. National Institute of Technology, Durgapur (West Bengal) 82
41. National Institute of Technology, Hamirpur (Himachal Pradesh) 82-83
42. National Institute of Technology, Raipur (Chhattisgarh) 83
43. National Institute of Technology, Rourkela (Odisha) 83-84
44. National Institute of Technology, Silchar (Assam) 84-85
45. National Institute of Technology, Srinagar (Jammu & Kashmir) 85-86
46. National Institute of Technology, Karnataka, Surathkal (Karnataka) 86-87
47. National Institute of Technology, Tiruchirappalli (Tamil Nadu) 87-88
48. National Institute of Technology, Warangal (Karnataka) 88-89
49. National Institute of Technical Teachers Training & Research (NITTTR), Kolkata (West Bengal) 89-90
50. Netaji Subhas Institute of Technology, New Delhi (New Delhi) 90
51. PDPM Indian Institute of Information Technology Design & Manufacturing, Jabalpur (Madhya Pradesh) 90-91
52. Pondicherry Engineering College, Puducherry 91-92
53. PSG College of Technology, Coimbatore (Tamil Nadu) 92-94
54. Rajiv Gandhi Institute of Technology, Govt. Engineering College, Kottayam (Kerala) 94
55. Samrat Ashok Technological Institute, Vidisha (Madhya Pradesh) 94
56. Sardar Patel College of Engineering, Mumbai (Maharashtra) 94
57. S.V. National Institute of Technology, Surat (Gujarat) 94-95
58. Sant Longowal Institute of Engineering & Technology, (Deemed University), Sangrur Longowal (Punjab) 95-96
59. Shri Guru Gobind Singh Institute of Engineering & Technology, Nanded (Maharashtra) 96-97
60. Shri G. S. Institute of Technology & Science, Indore (Madhya Pradesh) 97-98
61. Tezpur University, Tezpur (Assam) 98
62. Thiagarajar College of Engineering, Madurai (Tamil Nadu) 98-99
63. The National Institute of Engineering, Mysore (Karnataka) 99
64. TKM College of Engineering, Kollam (Kerala) 99
65. University Visveswaraya College of Engineering, Bangaluru (Karnataka) 100
66. University College of Engineering, Osmania University, Hyderabad (Andhra Pradesh) 100
67. University Of Hyderabad, School of Computer and Information Sciences, Hyderabad-500046 (Telengana) 100
68. Veer Surendra Sai University of Technology, Burla (Odisha) 101
69. Veermata Jijabai Technological Institute (VJTI), Mumbai (Maharashtra) 101
70. Visvesvaraya National Institute of Technology, Nagpur (Maharashtra) 101-102
71. Walchand College of Engineering, Sangli (Maharashtra) 102-103
72. Indian Institute of Technology, Hyderabad (Telengana) 103
73. Indian Institute of Technology, Bhubneshwar (Odisha) 103-104
74. Indian Institute of Technology, Patna (Bihar) 104
75. Indian Institute of Technology, Indore (Madhya Pradesh) 104-105
76. Indian Institute of Technology, Ropar (Punjab) 105
77. Indian Institute of Technology, Mandi (Himachal Pradesh) 105
78. Dr. B. R. Ambedkar National Institute of Technology, Jalandhar (Punjab) 106
79. M. S. Ramaiah Institute of Technology, Bengaluru (Karnataka) 106-107
80. Bannari Amman Institute of Technology, Erode (Tamil Nadu) 107-108
Specimen Application 109-111
1
I. GENERAL INFORMATION 1. The major QIP Centres at IITs and IISc offer admission to Ph.D. degree programme in several disciplines. In addition, institutions
recognized as the minor QIP Centres also offer admission to Ph.D degree programme under QIP in some specific departments.
2. Prior to regular admission to the Ph.D. programme at a QIP Centre, a candidate is required to join a pre- Ph.D. contact programme.
The duration of the pre-Ph.D. programme is 60 (sixty) days (Advance Admission Scheme) and that of the regular Ph.D. Degree
Programme is 3 (three) years.
3. Candidate should visit the website http://cepqip.iitd.ac.in for submitting online application, updated information related to
receipt of completed application, candidates called for interview, selected list of candidates and all other information pertaining to
QIP admission.
4. Candidate should read the brochure thoroughly before i) filling the fields in the online application and ii) sending the final print-
out of application (duly forwarded by the Head of Institution).
5. Candidates must first submit their application form online through http://cepqip.iitd.ac.in applications without online submission
will not be considered. Candidate should make sure that proper Institute/ Discipline codes are entered, all relevant details are duly
filled in the respective fields. Access to the link for online submission of application opens on September 17th, 2018 (Monday).
Last date for the online submission of application is October 15th, 2018 (Monday), 17:00 hrs and last date for receipt of duly
forwarded application along with enclosures is October 29th, 2018 (Monday).
6. After filling the application online, candidates should send the relevant number of prints of the online completed form, duly
forwarded by the Principal/ Head of the Institution, as instructed along with all enclosures and a Online Payment receipts for
Rs.1000/- (Rs.500/- for SC/ST/PD/Female Candidate) to The Principal Coordinator QIP, Quality Improvement Programme,
QIP/CEP office, 1st Floor, Vishwakarma Bhawan, Indian Institute of Technology Delhi, Hauz Khas, New Delhi - 110 016. 7. The candidate and the Principal/Head of the Institution forwarding the application should ensure that the application is to be
send to The Principal Coordinator QIP, Quality Improvement Programme, QIP/CEP office, 1st Floor, Vishwakarma Bhawan,
Indian Institute of Technology Delhi, Hauz Khas, New Delhi - 110 016, so as to reach on or before October 29th, 2018 (Monday).
Applications received after this date will not be considered. On receipt of the application, acknowledgement will be sent by email.
8. Information given by the candidate in the application for all of the options chosen, must be uniform and correct. In case of any
difference observed in the data relating to experience, marks, designation, addresses, age etc., his/her candidature is liable to be
cancelled at any stage even after the selection/ admission.
9. Applications submitted without the full support and recommendation of the candidate by the appropriate authority (Head
of the Institute) with seal, and/or without the required enclosures will automatically be rejected. Please note that no
corrections/ additions/ deletions to the recommendation format is permitted. Changes to the format of the forwarding/
recommendation note will not be accepted.
10. The application number allotted during the online registration should be quoted in all correspondences, and such
correspondences should be routed through the Principal/ Head of the candidate’s parent institution. If the application number
changes due to some unavoidable circumstances this change will be intimated through email to the candidate. The changed
application number may be quoted in all cases.
11. Short-listed candidates will receive Interview Call/ Admission letter from the respective QIP Coordinator of the Institute, where
they have applied to seek admission. The Principal Coordinator QIP will not send any Call letter to the candidate directly.
12. Interview schedule is final and cannot be altered/ changed under any circumstances. Candidates are required to appear
for interview at the Institute(s), where he/ she would like to seek admission. Candidates may plan their travel accordingly.
13. Concessions, relaxation, and reservations for candidates belonging to SC/ST/OBC/Physically Disabled (PD)/Female candidate are
as per rules. The reservation rules of GOI will be applied to overall admissions by the NQCC. The selection of a candidate is
considered only after the recommendation of the major/ minor QIP center.
2
II. INSTITUTIONS OFFERING Ph.D DEGREE PROGRAMME UNDER QIP AND THEIR CODES
Sl.
Nos. Name of the Institute/ University Code
Institutions that are Major QIP Centres: The following institutions having QIP Centres which offer admission to Ph.D degree programme
in several disciplines existing in those institutions:
1. Indian Institute of Science, Bangalore – 560 012 BG
2. Indian Institute of Technology Bombay, Mumbai – 400 076 BM
3. Indian Institute of Technology Delhi, New Delhi – 110 016 DL
4. Indian Institute of Technology Guwahati, Guwahati – 781 039 GW
5. Indian Institute of Technology Kanpur, Kanpur – 208 016 KN
6. Indian Institute of Technology Kharagpur, Kharagpur – 721 302 KH
7. Indian Institute of Technology Madras, Chennai – 600 036 MD
8. Indian Institute of Technology Roorkee, Roorkee – 247 667 RR
9. Indian Institute of Technology (BHU),Varanasi – 221 005 VN
Other Institutions that are Minor QIP Centres: The following recognized institutions also offer admission to Ph.D Degree Programme
under QIP in some specific departments as given below:
10. Alagappa Chettiar Government College of Engineering and Technology Karaikudi, (Tamilnadu) - 630 003
(i) Civil Engineering (ii) Electrical and Electronics Engineering (iii) Mechanical Engineering. AC
11.
Anna University, AC Technology Campus, Chennai (Tamilnadu) – 600 025
(i) Chemical Engineering (ii) Leather Technology (iii) Textile Technology (iv) Biotechnology.
AU
Anna University, College of Engineering Campus, Guindy, Chennai (Tamilnadu) – 600 025
(i) Civil Engineering (ii) Electrical Engg. (iii) Information and Communication Engg. (iv) Mechanical Engineering.
School of Architechture and Planning, Guindy, Chennai (Tamilnadu) – 600 025
(i) Architechture Planning.
Anna University, Madras Institute of Technology, Chennai (Tamilnadu) – 600 044
(i) Aerospace Engineering (ii) Automobile Engineering (iii) Electronics Engineering (iv) Instrumentation Engineering
(v) Production Technology.
12.
Basaveshwar Engineering College, (Autonomous), Bagalkot (Karnataka) – 587 102
(i) Civil Engineering (ii) Mechanical Engineering (iii) Electrical Engineering (iv) Electronics & Communication
Engineering (v) Computer Science & Engineering.
BA
13.
B.M.S. College of Engineering, Bangalore (Karnataka) – 560 019
(i) Civil Engineering (ii) Electrical Engineering (iii) Mechanical Engineering (iv) Industrial Engineering & Management
(v) Electronics & Communication Engineering.
BS
14. Coimbatore Institute of Technology, Coimbatore (Tamilnadu) – 641 014
(i) Civil Engineering (ii) Mechanical Engineering (iii) Electrical & Electronics Engg. (iv) Chemical Engineering. CC
15. College of Engineering Trivandrum, Thiruvananthapuram (Kerala) – 695 016
(i) Civil Engineering (ii) Mechanical Engg. (iii) Electrical Engg. (iv) Electronics & Communication Engineering. CT
16.
College of Engineering, Pune (Maharashtra) – 411 005
(i) Civil Engineering (ii) Mechanical Engg. (iii) Production Engineering (iv) Electrical Engg. (v) Electronics &
Telecommunication (vi) Computer Engg. (vii) Instrumentation & Control (viii) Metallurgy & Materials Science.
CP
17.
College of Technology & Engineering , MPUAT, Udaipur (Rajasthan) – 313 001
(i) Electrical Engineering (ii) Farm Machinery & Power Engineering (iii) Processing & Food Engineering
(iv) Soil & Water Engineering (v) Renewable Energy Engineering.
CA
18. Delhi Technological University, Delhi – 110 042
(i) Civil Engineering (ii) Mechanical Engg. (iii) Electrical Engineering (iv) Polymer Science & Chemical Technology. DD
19.
Giani Zail Singh Campus College of Engineering & Technology, Bathinda (Punjab) – 151 001
(i) Computer Science & Engineering (ii) Mechanical Engineering (iii) Electrical Engineering (iv) Civil Engineering.
(v) Electronics & Communication Engineering (vi) Textile Engineering.
GZ
20. Government College of Engineering, Amravati (Maharashtra) – 444 604
(i) Electrical Engineering (ii) Mechanical Engineering (iii) Civil Engineering. AM
21. Govt. College of Engineering, Aurangabad (Maharashtra) – 431 005
(i) Civil Engineering (ii) Electrical Engineering (iii) Electronics & Communication Engineering. GA
3
Sl.
Nos. Name of the Institute/ University Code
22. Govt. Engineering College, Govt. of Kerala, Thrissur (Kerala) – 680 009
(i) Civil Engineering (ii) Mechanical Engineering (iii) Electrical Engineering. GK
23. Govt. Engineering College, Salem (Tamil Nadu) – 680 009
(i) Civil Engineering (ii) Mechanical Engineering (iii) Electrical Engineering. GC
24. Guru Nanak Dev Engineering College, Ludhiana (Punjab) – 141 006
(i) Civil Engineering (ii) Mechanical Engineering (iii) Electrical Engineering. GN
25. Harcourt Butler Technological Institute, Kanpur (Uttar Pradesh) – 208 002
(i) Civil Engineering (ii) Mechanical Engineering (iii) Electronics Engineering (iv) Chemical Engineering. HK
26.
Indian Institute of Engineering Science and Technology, Shibpur (West Bengal) – 711 103
(i) Civil Engineering (ii) Electrical Engineering (iii) Mechanical Engineering (iv) Mining Engineering (v) Aerospace
Engg. & Applied Mechanics (vi) Information Technology (vii) Metallurgy & Materials Engineering.
BE
27.
Indian Institute of Technology (Indian School of Mines), Dhanbad (Jharkhand) – 826 004
(i) Mining Engineering (ii) Mechanical Engineering (iii) Civil Engineering (iv) Electrical & Electronics Engineering
(v) Electrical & Communication Engineering (vi) Computer Science & Engineering.
IS
28. Indira Gandhi Institute of Technology, Sarang (Odisha) – 759 146
(i) Civil Engineering (ii) Mechanical Engineering (iii) Electrical Engineering. IO
29. Jadavpur University, Kolkata (West Bengal) – 700 032
(i) Electrical Engg. (ii) Electronics & Telecommunication Engg. (iii) Mechanical Engg. (iv) Production Engineering. JU
30. Jamia Millia Islamia University, New Delhi – 110 025
(i) Electrical Engineering. JM
31. Kamla Nehru Institute of Technology, Sultanpur (Uttar Pradesh) – 228 118
(i) Electrical Engineering. KS
32. Madan Mohan Malaviya University of Technology Gorakhpur (Uttar Pradesh) – 273 001
(i) Civil Engineering (ii) Electrical Engg. (iii) Electronics & Communication Engg. (iv) Mechanical Engineering. MM
33. Madhav Institute of Technology & Science, Gwalior (Madhya Pradesh) – 470 005
(i) Civil Engg. (ii) Architecture. (iii) Electrical Engg. (iv) Computer Science & Engg. (v) Mechanical Engineering. MG
34. Manipal Institute of Technology, Manipal (Karnataka) – 576 104
(i) Civil Engineering (ii) Mechanical and Manufacturing Engineering. MI
35.
Malaviya National Institute of Technology, Jaipur (Rajasthan) – 302 017
(i) Chemical Engineering (ii) Civil Engineering (iii) Electrical Engg. (iv) Mechanical Engineering (v) Metallurgical &
Materials (vi) Electronics & Communication Engineering (vii) Computer Engineering (viii) Centre for Energy and
Environment Engineering (ix) Management Studies (x) Architecture and Planning (xi) National Centre for Disaster
Mitigation and Management.
MJ
36.
Motilal Nehru National Institute of Technology, Allahabad (Uttar Pradesh) – 211 004
(i) Applied Mechanics (ii) Biotechnology (iii) Civil Engineering (iv) Computer Science & Engineering (v) Electrical
Engineering (vi) Electronics and Communication Engg. (vii) Mechanical Engineering (viii) Chemical Engineering (ix)
Chemistry (x) Humanities & Social Sciences (xi) Physics (xii) School of Management Studis (xiii) GIS Cell.
MN
37. National Institute of Foundry and Forge Technology, Hatia, Ranchi (Jharkhand) – 834 003
(i) Manufacturing Engineering (ii) Materials & Metallurgical Engineering. NF
38.
National Institute of Technology, Agartala (Tripura) – 799 055
(i) Mechanical Engineering (ii) Electronics & Communication Engg. (iii) Electrical Engineering (iv) Production
Engineering (v) Civil Engineering.
NA
39. National Institute of Technology, Calicut (Kerala) – 673 601
(i) Civil Engineering (ii) Electrical Engg. (iii) Electronics & Communication Engg. (iv) Mechanical Engineering. CL
40.
National Institute of Technology, Durgapur (West Bengal) – 713 209
(i) Biotechnology (ii) Chemical Engg. (iii) Civil Engineering (iv) Computer Science & Engineering (v) Electronics &
Communication Engg. (vi) Electrical Engg. (vii) Mechanical Engg. (viii) Metallurgical Materials Engineering.
ND
41.
National Institute of Technology, Hamirpur – 177 005 (Himachal Pradesh)
(i) Civil Engineering (ii) Mechanical Engineering (iii) Electrical Engineering (iv) Electronics and Communication (v)
Computer Science & Engineering (vi) Energy and Environmental Engineering.
NH
42. National Institute of Technology, Raipur – 492 001 (Chhattisgarh)
(i) Civil Engineering (Water Resources Development and Irrigation Engineering). NR
4
Sl.
Nos. Name of the Institute/ University Code
43.
National Institute of Technology, Rourkela (Odisha) – 769 008
(i) Ceramic Engineering (ii) Chemical Engineering (iii) Electronics & Communication Engineering (iv) Electrical
Engineering (v) Mechanical Engineering (vi) Metallurgical & Materials Engineering (vii) Mining Engineering.
RK
44. National Institute of Technology, Silchar (Assam) – 788 010
(i) Civil Engineering (ii) Computer Science & Engineering (iii) Electrical Engineering (iv) Electronics &
Communication Engineering (v) Mechanical Engineering.
NS
45. National Institute of Technology (NIT)-Srinagar, (Jammu and Kashmir) – 190 006
(i) Civil Engineering (ii) Mechanical Engineering (iii) Electrical Engineering (iv) Electronics and Communication. NJ
46.
National Institute of Technology Karnataka, Surathkal (Karnataka) – 575 025
(i) Applied Mechanics & Hydraulics (ii) Chemical Engineering (iii) Civil Engineering (iv) Computer Engineering (v)
Electrical & Electronics Engineering (vi) Electronics & Communication Engineering (vii) Humanities Social Science
& Management (viii) Mechanical Engineering (ix) Metallurgical & Materials Engg. (x) Mining Engineering.
SK
47.
National Institute of Technology, Tiruchirappalli (Tamil Nadu) – 620 025
(i) Electrical & Electronics Engineering (ii) Metallurgical & Materials Engineering (iii) Production Engineering (iv)
Chemical Engineering (v) Civil Engineering (vi) Computer Science & Engineering (vii) Instrumentation & Control
(viii) Mechanical Engineering.
TR
48. National Institute of Technology, Warangal (Telangana) – 506 004
(i) Chemical Engineering (ii) Civil Engineering (iii) Mechanical Engineering (iv) Mathematics & Humanities. WR
49. National Institute of Technical Teachers Training & Research (NITTTR), Kolkata (West Bengal) – 700 106
(i) Electrical Engineering (ii) Mechanical Engineering (iii) Civil Engineering (iv) Computer Science & Engineering. NK
50.
Netaji Subhas Institute of Technology, New Delhi – 110 078
(i) Electronics & Communication Engineering (ii) Computer Engineering (iii) Instrumentation & Control Engineering
(iv) Manufacturing Process & Automation Engineering (v) Bio-technology.
NN
51. PDPM Indian Institute of Information Technology Design & Manufacturing, Jabalpur (Madhya Pradesh) – 482 005
(i) Computer Science & Engineering (ii) Electronics & Communication Engineering (iii) Mechanical Engineering. PD
52.
Pondicherry Engineering College, Puducherry – 605 014
(i) Electronics & Communication Engineering (ii) Computer Science & Engineering (iii) Electrical & Electronics
Engineering (iv) Mechanical Engineering (v) Civil Engineering.
PY
53.
PSG College of Technology, Coimbatore (Tamil Nadu) – 641 004
(i) Mechanical Engineering (ii) Production Engineering (iii) Automobiles Engineering (iv) Electronics &
Communication Engineering (v) Biotechnology (vi) Biomedical Engineering (vii) Instrumentation & Control System
Engineering.
PS
54. Rajiv Gandhi Institute of Technology, Govt. Engineering College, Kottayam (Kerala) – 686 501
(i) Electrical Engineering (ii) Mechanical Engineering (iii) Civil Engineering. RG
55. Samrat Ashok Technological Institute, Vidisha (Madhya Pradesh) – 464 001
(i) Civil Engineering (ii) Computer Science & Engineering (iii) Information Technology (iv) Electrical Engineering (v)
Mechanical Engineering.
SV
56. Sardar Patel College of Engineering, Mumbai (Maharashtra) – 400 058
(i) Civil Engineering. SM
57.
S.V. National Institute of Technology, Surat (Gujarat) – 395 007
(i) Civil Engineering (ii) Mechanical Engineering (iii) Electrical Engineering (iv) Electronics & Communication
Engineering (v) Computer Engineering (vi) Chemical Engineering.
SS
58.
Sant Longowal Institute of Engineering & Technology, (Deemed University) (Punjab) – 148 106
(i) Mechanical Engineering (ii) Food Engineering & Technology (iii) Electronics & Instrumentation Engineering
(iv) Chemical Technology.
SP
59.
Shri Guru Gobind Singh Institute of Engineering & Technology, Nanded (Maharashtra) – 431 606
(i) Electronics & Communication Engineering (ii) Instrumentation & Control (iii) Production Engineering (iv) Civil
Engineering (v) Mechanical Engineering.
SG
60.
Shri G. S. Institute of Technology & Science, Indore (Madhya Pradesh) – 452 003
(i) Civil Engineering (ii) Electrical Engineering (iii) Electronics & Communication Engineering (iv) Computer Science
& Engineering (v) Mechanical Engineering (vi) Industrial & Production Engineering.
GS
61.
Tezpur University, Sonitpur Tezpur (Assam) – 784 028
(i) Computer Science & Engineering (ii) Electronics and communication Engineering (iii) Energy (iv) Food Engineering
and Technology.
TU
5
Sl.
Nos. Name of the Institute/ University Code
62.
Thiagarajar College of Engineering, Madurai (Tamil Nadu) – 625 015
(i) Civil Engineering (ii) Electrical Engineering (iii) Mechanical Engineering (iv) Electronics & Communication
Engineering (v) Computer Science & Engineering.
TM
63. The National Institute of Engineering, Mysore (Karnataka) – 570 008
(i) Civil Engineering (ii) Electrical Engg. (iii) Industrial & Production Engg. (iv) Computer Science & Engineering. NM
64. TKM College of Engineering, Kollam (Kerala) – 691 005
(i) Civil Engineering (ii) Mechanical Engineering. TK
65. University Visveswaraya College of Engineering, Bengaluru (Karnataka) – 560 056
(i) Civil Engineering. UV
66.
University College of Engineering, Osmania University, Hyderabad, (Telangana) – 500 007
(i) Civil Engineering (ii) Mechanical Engineering (iii) Electrical Engineering (iv) Electronics and Communication
Engineering (v) Computer Science & Engineering.
OU
67. University of Hyderabad, School of Computer and Information Sciences, Hyderabad (Telengana) – 500 046
(i) Computer and Information Science. UH
68.
Veer Surendra Sai University of Technology, Burla (Orissa) – 768 018
(i) Civil Engineering (ii) Electrical Engineering (iii) Electronics & Communication Engineering (iv) Mechanical
Engineering (v) Production Engineering.
VB
69. Veermata Jijabai Technological Institute (VJTI), Mumbai (Maharashtra) – 400 019
(i) Civil Engineering (ii) Electrical Engineering (iii) Mechanical Engg. (iv) Electronics Engg. (v) Textile Technology. VM
70. Visvesvaraya National Institute of Technology, Nagpur (Maharashtra) – 440 011
(i) Electrical Engineering (ii) Metallurgical Engineering. VR
71.
Walchand College of Engineering, Sangli (Maharashtra) – 416 415
(i) Civil Engineering (ii) Mechanical Engineering (iii) Electrical Engineering (iv) Electronics Engineering, (v)
Computer Science & Engineering.
WS
72. Indian Institute of Technology, Hyderabad (Telengana) – 502 285
(i) Bio-technology (ii) Computer Science & Engg. (iii) Civil Engineering (iv) Electrical & Electronics Engineering. HY
73.
Indian Institute of Technology, Bhubneshwar (Orissa) – 751 013
(i) Earth Ocean & Climate (ii) Electrical Science (iii) Humanities, Social Science & Management (iv) Infrastructure
(v) Mechanical Science (vi) Basic Science (vii) Mineral, Metallurgical and Materials.Engineering.
BH
74.
Indian Institute of Technology, Patna (Bihar) – 801 103
(i) Mechanical Engineering (ii) Chemical & Bio-Medical Engineering (iii) Civil & Environmental Engineering
(iv) Computer Science & Engineering (v) Electrical Engineering.
PA
75.
Indian Institute of Technology, Indore (Madhya Pradesh) – 453 552
(i) Computer Science and Engineering (ii) Electrical Engineering (iii) Mechanical Engineering (iv) Civil Engineering
(v) Bio-Sciences and Bio-Medical Engineering.
IR
76.
Indian Institute of Technology, Ropar (Punjab) – 140 001
(i) Mechanical Engineering (ii) Computer Science and Engineering (iii) Civil Engineering (iv) Chemical Engineering
(v) Electrical Engineering.
RO
77. Indian Institute of Technology, Mandi (Himachal Pradesh) – 175 005
(i) Computing Science & Engineering (ii) School of Engineering (iii) School of Basic Science. MA
78.
Dr. B. R. Ambedkar National Institute of Technology, Jalandhar (Punjab) – 144 011
(i) Chemical Engineering (ii) Computing Science & Engineering (iii) Mechanical Engineering (iv) Electronics &
Communication Engineering.
JL
79. M. S. Ramaiah Institute of Technology, Bengaluru (Karnataka) – 560 054
(i) Mechanical Engineering (ii) Electrical & Electronics Engineering (iii) Civil Engineering. MB
80. Bannari Amman Institute of Technology, Erode (Tamil Nadu) – 638 401
(i) Biotechnology (ii) Computing Science & Engineering (iii) Electronics & Communication Engineering. ER
6
III. CODES FOR DEPARTMENTS OFFERING TO Ph.D. DEGREE PROGRAMME AT VARIOUS INSTITUTIONS
Department/Centre Code Institution(s) Offering Ph.D. Degree Programme
Aerospace Engineering AE BG, BM, KH, KN, MD, AU
Aerospace Engineering and Applied Mechanics AE BE
Advance Technology Development Centre AT KH
Agriculture & Food Engineering AG KH
Alternate Hydro Energy Centre AH RR*
Applied Mechanics AM DL, MD, MN
Applied Mechanics & Hydraulics AM SK*
Applied Research In Electronics AL DL
Applied Science & Engineering PP RR
Architecture & Planning AR RR, AU, MJ
Architecture AR MG
Architecture & Regional Planning AP KH
Atmospheric & Oceanic Sciences AS BG
Atmospheric Sciences AS DL
Automobile Engineering AU AU, PS
Bio-chemical Engineering & Bio-technology BC DL
Bio-chemical Engineering BC VN
Bio-medical Engineering BM DL, VN, PS
Bio-technology BT KH, MD, ND, NN, RR, AU, MN, PS, HY, ER
Bio-sciences & Bio-Engineering BT GW
Bio-sciences & Bio-medical Engineering BB IR
Ceramic Engineering CM RK, VN
Centre of Excellence in Disaster Mitigation & Management DM RR
National Centre for Disaster DM MJ
Centre of Nanotechnology NT RR
Centre for Studies in Resources Engineering SR BM
Centre for Sustainable Technologies ST BG
Chemical Engineering CH AU, BG, BM, CC, DL, GW,HK, KH, KN, MD,MJ, ND,
RK, RR, SK,SS, WR, TR, VN, MN, RO, JL
Chemical Engineering & Bio-medical Engineering CB PA
Chemistry CY BM, DL, GW, KH, KN, MD,MN, RR, VN
Civil Engineering CE
AM,AU, BA, BE, BG, BM*, BS, CC, CL, CP, CT, DD,
DL*, GA, GC, GK, GN, GS, GW,GZ,HK,IO, KH, KN*,
MD*, MG, MI*,MJ, MM,MN,NA,ND, NM,NS,PY,RG,
RR*, SG*, SK*,SM,SS, SV, TK,TM, UV, VB,VM, WR,
WS, VN,AC,NK,OU,NH,NJ, IS, HY*, IR, RO, MB
Civil Engineering CV TR
Civil & Environmental Engineering CE PA
Computer Science & Automation CS BG
Computer Science & Engineering CS
BM, BA, DL, GS, GW,GZ, KH, KN, MD, MG, MN, ND,
NM, NS, PD, PY, SV, TM, TR, WS, RR, VN, NK, TU,
OU, NH, IS, HY, PA, IR, RO, MA, JL, ER
Computer and Information Science CS UH
Computer Engineering CS MJ, SK, NN, CP, SS
Computational and Data Sciences CD BG
Cryogenic Engineering CR KH
7
Department/Centre Code Institution(s) Offering Ph.D. Degree Programme
Centre for Educational Technology ET KH
Centre for Oceans, Rivers, Atmosphere and Land Sciences EV KH
Design DE GW
Earth Sciences ES BM, RR, BG
Earthquake Engineering EQ RR
Electrical & Electronics Engineering EE GW, TR, CC, SK, PY, AC*, MB
Electrical Communication Engineering EC BG
Electrical Engineering EE
AM, AU, BG, BM*, BA, BS, CL, CP, CT, DL, DD, GA,
GC, GK, GS, GN,GZ, JU*,IO, KH, KN*, KS, MD*,
MG, MJ, MM, MN, NA, ND, NM, NS, NJ, RG, RK,
RR, SS, SV, TM, VB, WS, VM, VR, BE, VN*, NK, CA,
JM, OU, NH, IS, HY, PA, IR, RO
Electronics & Communication Engineering EC
BA, BS, CL, CT, GS , MM, PD, RK*, SG*, SK, TM, VB,
PY, NN, ND, TU, MJ, RR*, GZ, MN, NA, OU, NH, NS,
NJ, PS, JL, ER
Electronics & Electrical Communication Engineering EC KH
Electronics & Telecommunication Engineering EC JU*, CP, GA
Electronics Engineering EC AU, VM, WS, HK, VN, SS, IS
Electronic, Systems Engineering (Centre) ED BG
Electronics & Instrumentation Engineering IE SP
Energy (Centre) EN GW,TU
Energy Studies (Centre) EN DL
Energy Science & Engineering EN BM, KH
Engineering Design ER MD
Environment (Centre) EV GW
Environmental Science & Engineering EV BM
Energy & Environment Engineering EN NH
Energy & Environment Engineering CE MJ
Food Engineering & Technology FE SP,TU
Geology and Geophysics GG KH
G.S. Sanyal School of Telecommunication GT KH
Humanities & Social Sciences HS BM, DL, GW, KH, KN, MD,MN, RR
Humanities, Social Science & Management HS SK
Hydrology HY RR
Industrial Tribology, Machine Dynamics & Maintenance
Engineering TR DL
Industrial & Management Engineering IM KN
Industrial Design Centre ID BM
Industrial Engineering & Operations Research IO BM
Industrial and Systems Engineering IM KH
Industrial & Production Engineering IP GS, NM
Industrial Engineering & Management IE BS
Information & Communication Engineering IC AU
Information Technology IT SV, BE
8
Department/Centre Code Institution(s) Offering Ph.D. Degree Programme
Instrumentation & Control IC CP, NN, TR, SG*
Instrumentation & Control Systems Engineering IC PS
Design ID DL
Instrumentation Engineering IN AU
Instrumentation Centre IC RR
Instrumentation and Applied Physics IN BG
Infrastructure Design and Management ID KH
Medical Science and Technology MB KH
Leather Technology LT AU
Management Studies MS MD
Management Studies MG BG, RR, DL, MJ
Material Research Centre MR BG
Materials Science & Engineering MT KN
Materials Science MS KH, KN
Materials Science & Technology MS VN
Mathematics MA BG, BM, DL, GW, KH, MD, RR
Mathematical Sciences MA VN
Mathematics & Humanities MH WR
Mathematics/Statistics MA KN
Manufacturing Process & Automation MP NN
Mechanical & Industrial Engineering ME RR*
Manufacturing Engineering ME NF
Mechanical Engineering ME
AM, AU, BA, BG, BM*, BS, CC, CL, CP, CT, DD, DL,
GK, GC, GS, GN, GW,GZ, HK, IO, KH, KN, JU*, MD,
MG, MJ, MM, MN,NA, ND, PD, PS, PY, RG, RK*, SG*,
SK, SP, SS, SV,TK, TM, TR, VB, VM, WR, WS, BE,
VN*, AC, NK, OU, NH, NJ, NS, IS, PA, IR, RO, JL, MB
Mechanical & Manufacturing Engineering MM MI*
Metallurgical & Materials Engineering MM MD, MJ, RK
Metallurgical & Materials Engineering MT KH, SK ,TR, NF, ND, RR
Metallurgical Engineering & Materials Science MM BM
Metallurgical Engineering MT VN,VR
Materials Engineering MT BG
Materials Science & Engineering MS DL
Metallurgy & Materials Science MT CP
Metallurgy & Materials Engineering MT BE
Mining Engineering MI IS, RK, SK ,VN, BE
Mining Engineering MN KH
Nuclear Engineering and Technology NE KN
Ocean Engineering OE MD*
Ocean Engineering & Naval Architecture OE KH
Pulp & Paper Engineering PP RR
Product Design PD BG
9
Department/Centre Code Institution(s) Offering Ph.D. Degree Programme
Physics PH BG, BM*, DL, GW, KN, MD,MN, RR,KH, VN
Photonic Science & Engineering LS KN
Polymer Science & Chemical Technology PS DD
Production Engineering PE CP, JU*,NA, PS, SG*,TR, VB
Production Technology PT AU
Polymer & Process Engineering PP RR
Reliability Engineering RE KH
Rubber Technology RT KH
Rural Development & Technology RD DL
Rural Development RD KH
School of Bio-sciences & Bio-engineering BS BM*
School of Basic-sciences BS BH, MA
School of Engineering SE MA
School of Earth, Ocean, and Climate Sciences CG BH
School of Electrical Sciences ES BH
School of Infrastructure IF BH
School of Management MG BM, KH
School of Management & Studies MG MN
School of Mechanical Sciences ME BH
School of Metallurgical and Materials Sciences MM BH
School of Humanities Social Sciences and Management HS BH
School of Water Resources WR KH
Systems & Control Engineering SC BM
Textile Engineering TX GZ
Textile Technology TX DL, VM, AU
Centre for Transportation Systems (CTRANS) TS RR
Water Resources Development & Management WR RR
Water Resource Development & Irrigation Engineering WI NR
Farm Machinery & Power Engineering FM CA
Processing & Food Engineering PF CA
Soil & Water Engineering SW CA
Renewable Energy Engineering RE CA
GIS Cell GI MN
Chemical Technology CT SP
*Specialization have to be indicated while opting for the particular department. Codes for the Specializations are given along with the details
corresponding to the particular institution (Depts. & Field of Specialization).
10
IV. ELIGIBILITY CRITERIA
1. Only candidates (such as Assistant Professors, Associate Professors, Lecturers, Readers, Workshop Superintendent and
Professors) with a minimum of three-years teaching experience as full-time regular/permanent teachers of AICTE approved Degree
level Engineering Institutions as on September 30th, 2018 are eligible to apply. Admissions to Ph.D degree programme under QIP
are open only to candidates with a basic degree in Engineering or Technology or Architecture or such other qualification.
2. The candidate should satisfy the minimum eligibility criteria prescribed by the individual Department (and/or the Institution) to which
admission is sought.
3. Computer Programmers, Systems Programmers, Workshop Staffs, Guest Lecturers, Visiting Lecturers, Teaching Assistants, Ad-
hoc/ Contract or Part-time Teachers, Research Engineers, Scientific Officers, Technical Assistants, and other such categories of staff
are not eligible.
4. Teachers of the Major QIP Centres are not eligible.
5. Teachers of the Minor QIP Centres are eligible to apply to Major QIP Centres.
6. Teachers of the minor QIP Centres are permitted to apply for a field of specialization available in another minor QIP centre, which is
not available in their parent department on the specific recommendations of the Department’s and Institute’s Head stating that a faculty
in the particular specialization is required for their Institution. Candidates completed M.Tech under QIP programme can not apply
before completion of the bond period at their parent Institute.
V. ADVANCE ADMISSION SCHEME
As per the advance admission scheme for Ph.D degree programme under QIP, a candidate will receive advance admission during 2019-
2020 session to the Pre-Ph.D programme and on successful completion of this programme, he will be offered admission to the regular
Ph.D programme during 2020-2021. During the one-year period of the Pre-Ph.D programme, the candidate is required to make maximum
of four visits to the institution (to which he/she is offered admission) for a total period of sixty days, to decide on the area of research,
to identify guide, and to start preliminary work. During this period, the candidate is to be treated as on deputation by the sponsoring
institution. TA/DA as per AICTE norms for the visits would be borne by the Institute where the admission is offered, subject to the
receipt of the grants from the AICTE. The question of final offer for admission will be considered during May-July 2020, based on the
performance of the candidate during the period of the advance admission.
VI. LIVING EXPENDITURE ALLOWANCE AND CONTINGENCY GRANT
The candidates admitted for the regular Ph.D. degree programme under QIP will receive a sum of Rs. 15,000/- per month as
Living Expenditure allowance and a Contingency Grant of Rs.15, 000 per annum for three years.
VII. CONDITIONS FOR ADMISSION
1. Admission is possible only to the Institutions and the Departments listed in the Information Brochure.
2. The final admission of the candidate will be subject to the clearance and approval by the Admission Wing (Section) of the
concerned institution as per its rules and regulations in force at the time of admission.
3. The candidate, if selected, should be relieved from the parent Institution to join the programme in time for the session to which he/she
is admitted.
4. The candidate joining the Ph.D. degree programme under QIP on deputation would be entitled to receive his/her salary and allowances,
which must be paid by the parent institution sponsoring him/her. Sponsoring institutions / directorates may kindly note that any other
alternate form of deputation / study leave that does not provide for full salary and allowances for the full period of 3 years, is not
permissible as per AICTE norms.
5. Conditional recommendation by the Principal/Head of the Institution will not be accepted.
6. The Principal/Head of the Institution of a candidate who is selected for admission should ensure that the sponsorship certificate is
produced by the candidate at the time he/she joins the course.
7. If a QIP scholar discontinues Ph.D programme, the scholar has to refund the scholarship and contingency received to the AICTE
through the QIP Centre, and the parent institution may seek refund of the salary and allowances paid to him for the period he/she
attended the programme.
11
VIII. INSTRUCTIONS FOR COMPLETING THE ONLINE APPLICATION
General Instructions
1. The website link for application is http://cepqip.iitd.ac.in. Click on Ph.D/ M.Tech admission 2019-2020 under QIP.
2. The candidate should first register by clicking “New Registration”. An email confirming the registration will be sent by assigning
the application number and a password. The application number and the password are required for subsequent operations. Hence the
candidate should remember both of them or keep them at a safe place.
3. Candidate can start filling up the online application by logging in through “View/Edit Application”.
4. On-line application can be completed in one or more sessions by revisiting the website using the assigned application number and
password.
5. The candidate should enter all required information correctly in all fields of the online application.
6. After filling the fields, the candidate can save the information in between by using the SAVE button. The candidate can edit data in
any field till the final submission and printout is taken. The last date for the on-line submission of application is October 15th,
2018 (Monday) 17:00 hrs.
Personal Information
7. After completing the Name, Designation, Department and Address fields (using the pull-down menu) enter Date of Birth, Gender as
‘Male’ or ‘Female’; the category by ’General’, ‘SC’, ‘ST’, or ‘OBC, put ‘Yes’ if you belong to Physically Disabled Category and
“No’ if you do not; Married as ‘Yes’ if you are married and ‘No’ if you are single.
Educational Qualifications and Academic Data
8. During the process of entering the application details, additional sub-links are provided in appropriate places. For example, while
entering the overall performance of the candidate under ‘Educational Qualifications’, there will be a link through which the candidate
can furnish the semester wise / year wise particulars.
9. For filling academic data and additional qualification, if the absolute marks are awarded, then fill, e.g. 650/800 where the
total marks obtained is 650 out of total of 800. If the Grade Point Average (GPA) is awarded, fill, e.g. 6.7/10 where 6.7 is GPA
obtained on a scale of 10. If the candidate has failed in any subject during any semester examination and cleared that subject
in a later semester, the marks obtained in that subject should be added back to the semester in which it was supposed to have been
cleared and then the total marks is to be calculated. Candidate should take the marks of all the semesters for calculating the
overall percentage or CGPA (irrespective of the methodology adopted by the university/college in awarding final
class/division).
10. During the entry of details like detailed semester wise / year wise information, detailed teaching experience etc., the candidate has
to enter the details for which documents of proof are to be attached.
Institute and Department Preferences
11. A candidate can apply to a maximum of three institutions and a maximum of two departments in each of the chosen Institutes (i.e.,
maximum of total six options only).
12. Select the Institution by using the pull-down-menu as per the order of your preference. Then enter the programme code desired
as per preferred choices with valid code.
13. Appropriate list of ‘valid codes’ can be viewed using links provided. The Programme code contains 6 characters; the first 2
alphabets identify the Institute, the next 2 alphabets identify the department within the Institute and the last 2 digits identify the field
of specialization. For example, a code ‘KNEC01’ represents a particular field of specialization in the Department of Electronics &
Communication Engineering, IIT Kanpur.
Preview of Application
14. Once the complete details about the candidate are entered and saved, the on-line application can be printed. To preview the
completed application, the candidate can print a draft copy of the application. He should check the completeness and correctness
of the information; if needed, corrections can also be made before the final submission.
Final Confirmations and Printouts
15. After finalizing the contents of the application, the candidate should invoke the FINAL version of the application. Click here for
printing the FINAL version of the application. Once the FINAL version option is chosen, the candidate will not be allowed to
modify the contents of the application. The FINAL version should be printed only on A4 sheet with the print orientation as
‘portrait’, and margins as 20 mm (left, right, top and bottom). The print report contains multiple copies of the application. The
first copy corresponds to the copy for The Principal Coordinator QIP, Office of Quality Improvement Programme (QIP/CEP),
Vishwakarma Bhawan, 1st Floor, Wing-B, Indian Institute of Technology Delhi, Hauz Khas, New Delhi – 110 016 and one copy
each for the preference code related to the number of institutions and departments, a candidate proposes to apply to.
12
16. The following table indicates the number of printouts to be taken and the number of sets of enclosures required as related to the
number of institutions and departments a candidate proposes to apply.
No. of Institutions Chosen Total No. of Departments
(Streams or Specializations) Chosen
No. of applications to be printed and
No. of sets of enclosures required
1 1 2
1 2 3
2 2 3
2 3 4
2 4 5
3 3 4
3 4 5
3 5 6
3 6 7
17. In each copy, the candidate should affix his/her recent stamp-size photograph in the space provided.
18. The candidate should thoroughly verify the contents of the printed documents and sign at the appropriate places.
19. In the “Forwarding Note” of the Application Form, the space provided for the Name of the Candidate and Teaching
experience must be duly filled in and signed by the Principal / Head of the Institution along with full contact details Name,
Designation, Contact No., E-mail & AICTE affiliation No. etc. and Office Seal.
20. Applications submitted without signatures of the candidate and the appropriate authorities with seal, and/or without the required
enclosures will automatically be deemed invalid.
IX. APPLICATION FEE
Online Payment Receipt of Rs 1000/-for General/OBC Category and Rs. 500/-for SC/ST/PD/ Female Candidate should be attached
with the form marked as, Copy for Principal Coordinator on top of the form. Candidate should write their application number,
name, address and courses applied on back side of the receipt. Candidate should note that the fee paid other than online i.e., by DD,
IPO, cheques, etc. are not acceptable. Application fees once paid cannot be refunded.
Procedure for Payment of Application Fees:-
Step-1. URL:https://www.onlinesbi.com/prelogin/institutiontypedisplay.htm
Step-2. State of Corporate/Institution: National Capital Territory of Delhi Corporate/Institution:
Educational Institutions Choose following and click Go button
Step-3. Educational Institute Name: IITD REVENUE ACCOUNT (FEE COLLECTION) Click submit
Step-4. Payment Category: QIP APPLICATION FEES
X. CHECKLIST FOR EACH COPY OF THE APPLICATION FORM
• In Forwarding Note; the candidate should check his/ her name, years and months of experience, signature, date, and and
signed by the Principal / Head of the Institution along with contact details Name, Designation, Contact No., E-mail &
AICTE affiliation No. and office seal.
• Photographs; Affix recent stamp size photographs at space provided on all copies of Application Forms including Copy for
Principal Coordinator.
• Signatures of the Applicant; The candidate should sign in all the print-outs at relevant places.
• Candidate should ensure that all information’s are properly filled in and required number of print-outs are taken and all copies
are to be send to the Principal Coordinator QIP.
Enclosures
1. Application Fee: Online Payment Receipt of Rs. 1000/- for General/OBC Category and Rs. 500/- for SC/ST/PD/ Female
Candidate should be enclosed with the copy of the Principal Coordinator QIP form only.
2. Candidates belonging to SC/ST/ OBC category, must attach an attested copy of the caste certificate issued by a competent
authority as per the Government of India rules.
3. Physically Disabled candidates must attach a copy of the certificate issued by a competent authority as per Government of
India rules.
4. Enclose attested copies of all the relevant certificates
• Certificates of the Qualifying Examination (Bachelor and Master) and other Degrees
• Age proofing Certificate
• Mark Lists of all years/semesters of qualifying examination (mark sheets clearly showing total marks obtained
out of maximum marks according to semester or year)
13
• Teaching Experience
• Industrial/Research Experience Certificates.
• The certificates of Short Term Courses attended.
• All Research Publications.
• Any other Academic qualifications/Awards etc.
XI. INSTRUCTIONS FOR DESPATCHING
1. For the convenience of the candidate, a check list is mentioned in point ‘X’ above. One can use this list and ensure the completeness
of application. Once completed, the entire bunch (all copies) is to be dispatch to The Principal Coordinator QIP, Office of
Quality Improvement Programme (QIP/CEP), Vishwakarma Bhawan, 1st Floor, Wing-B, Indian Institute of Technology
Delhi, Hauz Khas, New Delhi – 110 016 along with the Payment Receipt.
2. Before mailing the completed forms, please ensure that each copy of application form and its enclosures are properly fastened
with a tag separately at the left-hand top corner.
3. In case, your applications are submitted by your sponsor, it is your responsibility to ensure that the application is forwarded to the
Office of the Principal Coordinator QIP, IIT Delhi well within time so as to reach on or before October 29th, 2018 (Monday).
Applications received after this date will not be considered.
4. In case, the candidate has forgotten the password, the candidate should send an email (using the email ID mentioned in the online
application) to [email protected] furnishing the following details: Application Number, Name of the Candidate, Date of Birth,
and Address for correspondence, Gender and Category. After verification, the candidate will be informed the password through
email only.
5. The requisite number of the print-outs of the application submitted on-line, along with the required number of enclosures, as
mentioned, should be sent to The Principal Coordinator QIP, Office of Quality Improvement Programme (QIP/CEP), Vishwakarma
Bhawan, 1st Floor, Wing-B, Indian Institute of Technology Delhi, Hauz Khas, New Delhi – 110 016, preferably by Speed Post or
Courier Service, to reach the Office on or before October 29th, 2018 (Monday). Applications received after this date will not be
considered: All the completed application forms along with enclosures should be sent only to The Principal Coordinator QIP, Office
of Quality Improvement Programme (QIP/CEP), Vishwakarma Bhawan, 1st Floor, Wing-B, Indian Institute of Technology Delhi, Hauz
Khas, New Delhi – 110 016. For any clarification contact: Phone: 011-26597118; Fax: 011-26581069, Email: [email protected]
XII. LAST DATE
The last date for online submission of application is October 15th, 2018 (Monday). Print-outs of online filled-in application,
including the Copy for Principal Coordinator QIP, with its enclosures, complete in all respect should reach The Principal
Coordinator QIP, Office of Quality Improvement Programme (QIP/CEP), Vishwakarma Bhawan, 1st Floor, Wing-B, Indian Institute
of Technology Delhi, Hauz Khas, New Delhi – 110 016, on or before October 29th, 2018 (Monday). Applications received after this date
will not be considered.
XIII. PROCEDURE FOR ADMISSIONS UNDER QIP
1. Short-listing of the candidates will be done first by the office of the Principal Coordinator, then finally at the Department/Institute
concerned. Interview letters will be sent to the short-listed candidates by the Department/institute concerned.
2. Interviews will be conducted in the Departments at the individual Institutions. Schedule of interviews is provided in the next
page. Please note that No TA/DA will be paid to candidates for attending the Interviews.
3. Selections will be made by the National QIP Coordination Committee (NQCC) based on the recommendations of various institutions.
4. Final Results will be available at the web site: http://cepqip.iitd.ac.in
5. Admission letters will be issued to the selected candidates by the respective QIP centres or Academic sections of the
institutions offering admission.
14
SCHEDULE OF INTERVIEWS FOR ADMISSION TO Ph.D DEGREE PROGRAMMES UNDER QIP
The following dates of interview at various QIP Centres, finalized by Principal Coordinator QIP/National QIP Coordination Committee
(NQCC), are final and can not altered under any circumstances.
Sl.
Nos. Institute
Interview
Date Day
1. Indian Institute of Engineering Science and Technology, Shibpur (West Bengal) 02/01/2019 Wednesday
2. Jadavpur University, Kolkata (West Bengal) 03/01/2019 Thursday
3. National Institute of Technical Teachers Training & Research, Kolkata (West Bengal) 04/01/2019 Friday
4. IIT Kharagpur (West Bengal) 07/01/2019 Monday
5. National Institute of Technology, Durgapur (West Bengal) 08/01/2019 Tuesday
6. Indian Institute of Technology (Indian School of Mines), Dhanbad (Jharkhand) 09/01/2019 Wednesday
7. National Institute of Foundry and Forge Technology, Ranchi (Jharkhand) 10/01/2019 Thursday
8. National Institute of Technology, Rourkela (Odisha) 11/01/2019 Friday
9. Veer Surendra Sai University of Technology, Burla (Odisha) 14/01/2019 Monday
10. Indira Gandhi Institute of Technology, Sarang, (Odisha) 15/01/2019 Tuesday
11. Indian Institute of Technology, Bhubneshwar, (Odisha) 16/01/2019 Wednesday
12. National Institute of Technology, Silchar (Assam) 17/01/2019 Thursday
13. National Institute of Technology, Agartala (Tripura) 18/01/2019 Friday
14. IIT Guwahati (Assam) 21/01/2019 Monday
15. Tezpur University, Tezpur, (Assam) 22/01/2019 Tuesday
16. Indian Institute of Technology, Ropar (Punjab) 23/01/2019 Wednesday
17. Giani Zail Singh College of Engineering & Technology, Bathinda (Punjab) 24/01/2019 Thursday
18. Netaji Subhas Institute of Technology, New Delhi 25/01/2019 Friday
19. IIT Delhi (New Delhi) 28/01/2019 Monday
20. Delhi Technological University, Delhi 29/01/2019 Tuesday
21. Jamia Millia Islamia Central University, New Delhi 30/01/2019 Wednesday
22. Malaviya National Institute of Technology, Jaipur (Rajasthan) 31/01/2019 Thursday
23. College of Technology & Engineering, (MPUAT) Udaipur (Rajasthan) 01/02/2019 Friday
24. IIT (BHU), Varanasi (Uttar Pradesh) 04/02/2019 Monday
25. Madan Mohan Malaviya University of Technology, Gorakhpur (Uttar Pradesh) 05/02/2019 Tuesday
26. Indian Institute of Technology, Patna (Bihar) 06/02/2019 Wednesday
27. Motilal Nehru National Institute of Technology, Allahabad (Uttar Pradesh) 07/02/2019 Thursday
28. Kamla Nehru Institute of Technology, Sultanpur (Uttar Pradesh) 08/02/2019 Friday
29. IIT Kanpur (Uttar Pradesh) 11/02/2019 Monday
30. Harcourt Butler Technological Institute, Kanpur (Uttar Pradesh) 12/02/2019 Tuesday
31. Madhav Institute of Technology & Science, Gwalior (Madhya Pradesh) 13/02/2019 Wednesday
32. SGS Institute of Technology & Science, Indore (Madhya Pradesh) 14/02/2019 Thursday
33. Indian Institute of Technology, Indore (Madhya Pradesh) 15/02/2019 Friday
34. IIT Roorkee (Uttarakhand) 18/02/2019 Monday
35. National Institute Technology, Raipur (Chhattisgarh) 19/02/2019 Tuesday
36. PDPM Indian Institute of Information Technology Design & Manufacturing, Jabalpur (MP) 20/02/2019 Wednesday
37. Samrat Ashok Technological Institute, Vidisha (Madhya Pradesh) 21/02/2019 Thursday
38. Visvesvaraya National Institute of Technology, Nagpur (Maharashtra) 22/02/2019 Friday
39. IIT Bombay (Maharashtra) 25/02/2019 Monday
40. S.V. National Institute of Technology, Surat (Gujarat) 26/02/2019 Tuesday
41. Sardar Patel College of Engineering, Mumbai (Maharashtra) 27/02/2019 Wednesday
42. Veermata Jijabai Technological Institute (VJTI), Mumbai (Maharashtra) 28/02/2019 Thursday
43. College of Engineering, Pune (Maharashtra) 01/03/2019 Friday
44. Walchand College of Engineering, Sangli (Maharashtra) 05/03/2019 Tuesday
15
XV. DEPARTMENTS & FIELDS OF SPECIALIZATION AT VARIOUS INSTITUTIONS
The department offering admission to Ph.D degree programme at various institution and the fields of specialization in the
departments/centre are listed in the Tables.
Specializations mentioned indicate only areas of interest and are not exhaustive. There may not be admissions open to all
the areas indicated, and candidates, if found suitable, may be admitted to related areas also.
The details given are subject to variation and change from time to time and only those operating in the respective institutions at the time
of actual admissions are applicable. Candidates desirous of more information on the matter may write to the individual institution
or visit their website.
45. Government College of Engineering, Amravati (Maharashtra) 06/03/2019 Wednesday
46. Govt. College of Engineering, Aurangabad (Maharashtra) 07/03/2019 Thursday
47. Shri Guru Gobind Singh Institute of Engineering & Technology, Nanded (Maharashtra) 08/03/2019 Friday
48. IISC, Bangalore (Karnataka) 11/03/2019 Monday
49. UVCE, Bangalore (Karnataka) 12/03/2019 Tuesday
50. BMS College of Engineering, Bangalore (Karnataka) 13/03/2019 Wednesday
51. M. S. Ramaiah Institute of Technology, Bengaluru (Karnataka) 14/03/2019 Thursday
52. The National Institute of Engineering, Mysore (Karnataka) 15/03/2019 Friday
53. IIT Madras (Tamil Nadu) 18/03/2019 Monday
55. Anna University, (Tamil Nadu) 19/03/2019 Tuesday
56. Pondicherry Engineering College, Puducherry (Tamil Nadu) 20/03/2019 Wednesday
57. National Institute of Technology, Tiruchirapalli (Tamil Nadu) 21/03/2019 Thursday
58. Thiagarajar College of Engineering, Madurai (Tamil Nadu) 22/03/2019 Friday
59. PSG College of Technology, Coimbatore (Tamil Nadu) 25/03/2019 Monday
60. Coimbatore Institute of Technology, Coimbatore (Tamil Nadu) 26/03/2019 Tuesday
61. Bannari Amman Institute of Technology, Erode (Tamil Nadu) 27/03/2019 Wednesday
62. Govt. Engineering College, Thrissur, (Kerala) 28/03/2019 Thursday
63. TKM College of Engineering, Kollam, (Kerala) 29/03/2019 Friday
64. College of Engineering Trivandrum, Thiruvananthapuram (Kerala) 01/04/2019 Monday
65. Alagappa Chettiar Government College of Engg. and Technology, Karaikudi, (Tamil Nadu) 02/04/2019 Tuesday
66. Govt. College of Engineering, Salem (Tamil Nadu) 03/04/2019 Wednesday
67. Manipal Institute of Technology, Manipal (Karnataka) 04/04/2019 Thursday
68. Basveshwar Engineering College, Bagalkot (Karnataka) 05/04/2019 Friday
69. National Institute of Technology, Calicut (Kerala) 08/04/2019 Monday
70. National Institute of Technology Karnataka, Surathkal (Karnataka) 09/04/2019 Tuesday
71. Rajiv Gandhi Institute of Technology, Govt. Engineering College, Kottayam (Kerala) 10/04/2019 Wednesday
72. Unversity College of Engineering, Osmania University, Hyderabad (Telangana) 11/04/2019 Thursday
73. University of Hyderabad, School of Computer and Information Sciences, Hydrabad (Telangana) 12/04/2019 Friday
74. Indian Institute of Technology, Hyderabad (Telangana) 15/04/2019 Monday
75. National Institute of Technology, Warangal (Karnataka) 16/04/2019 Tuesday
76. Guru Nanak Dev Engineering College, Ludhiana (Punjab) 17/04/2019 Wednesday
16. Sant Longowal Institute of Engg. & Tech. (Deemed University), Sangrur (Punjab) 18/04/2019 Thursday
77. Dr. B. R. Ambedkar National Institute of Technology, Jalandhar (Punjab) 22/04/2019 Monday
78. National Institute of Technology, Hamirpur (Himachal Pradesh) 23/04/2019 Tuesday
79. Indian Institute of Technology, Mandi (Himachal Pradesh) 24/04/2019 Wednesday
80. National Institute of Technology, Sri Nagar (J&K) 25/04/2019 Thursday
16
1. Indian Institute of Science, Bangalore 560 012 – BG
In all cases, the minimum eligibility is second class or equivalent grade in the Bachelor’s as well as in the Master’s degree.
Code Department Fields of Specialization Minimum Qualification
BGAE01 Aerospace
Engineering
Theoretical and Experimental Fluid Mechanics, Applied Aerodynamics,
Hypersonic and High Enthalpy Flows, Computational Fluid Dynamics,
Flight Mechanics of Aircraft and Helicopters; Dynamics and Control of
Aerospace Vehicles, Orbital Mechanics, Space Robotics, Guidance,
Parallel/Distributed Processing and Neural Networks Applications,
Optimization & Estimation Techniques in Aerospace Systems; Aerospace
Propulsion, Basic and Applied Combustion, Experimental and
Computational Studies on Reactive Flows, Combustion of Propellants,
Composite Structures, Smart structures, Non-destructive Evaluation, Finite
Element Methods, Fracture Mechanics, Structural Integrity and Reliability,
Structural Dynamics and Aeroelasticity, Rotor Crafts Dynamics.
M.E. / M.Tech or equivalent degree in
Aerospace, Mechanical, Electrical,
Electronics, Chemical, Computer
Science, Civil.
BGAS01 Centre for
Atmospheric &
Oceanic Sciences
Monsoon Dynamics, Tropical Convection, Satellite Meteorology, Dynamics
of Oceans, Coupled Ocean-atmospheric Systems; Climate Modeling,
Boundary Layer, Aerosols and Climate.
M.E./ M.Tech or equivalent degree in
Mechanical, Civil/ Aerospace/
Chemical Engineering, Atmospheric
and Oceanic Sciences.
BGCH01 Chemical
Engineering
Nanostructures and nanotechnology for sensors, flexible electronics and
energy applications; Flow batteries and supercapacitors; Nanomaterials for gas separations, methane storage and carbon capture; Mechanics and dynamics of
granular materials, suspensions, soft solids, living matter and structured fluids;
Interfacial engineering for process modelling and process intensification; Reaction kinetics, catalysis, and bioengineering for environmental and energy
sector. Thermodynamics and molecular simulations of interfaces and soft
matter. Systems biology and single molecule methods for therapeutics and disease detection; Microfluidics for point of care diagnostics, cancer
therapeutics; Treatment of Drinking water.
M.E./M.Tech or equivalent degree.
BGCE01 Civil
Engineering
Geotechnical Engineering: Earthquake Geotechnical Engineering, Geo
environmental Engineering, Physico-chemical Aspects and Constitutive Modeling of Soil Behavior, Foundations, Earth and Earth Retaining
Structures, Ground Improvement Techniques, Geosynthetics, Mechanics of
Granular Media, Numerical Modeling of soils and rocks, Risk and Reliability Assessment of Geohazards, Soil Dynamics, Rock Mechanics,
Experimental Mechanics.
Water Resources and Environmental Engineering.: Water Resources
Systems, Climate Hydrology, Surface and Ground Water Hydrology,
Vadose Zone Hydrology, Open Channel Flows, Urban Water Distribution Systems, River Mechanics, Environmental Hydraulics, Water Quality
Modeling, Contaminant Transport in Surface and Ground Water Flows.
Structural Engineering: Structural Mechanics, Finite Element Analysis,
RC and Prestressed Concrete, Masonry Structures, Structural Dynamics, Non-Linear and Stochastic Dynamical Systems, Earthquake Engineering,
Structural Safety, Fracture Mechanics of Concrete, Materials in Civil
Engineering, Low Carbon Materials, Structural Health Monitoring, Contact
Mechanics, Computational Plasticity.
Transportation Engineering: Sustainable Transportation Planning,
Modeling and Optimization of Transportation Systems, Travel Behaviour,
Public Transport and Non-Motorized Transport Planning and Management, Intelligent Transport System (ITS), Traffic Management, Road Safety.
M.E./M.Tech or equivalent Degree in
Civil.
17
Code Department Fields of Specialization Minimum Qualification
BGCS01
Computer
Science and
Automation
Theoretical Computer Science - Algorithms; Complexity Theory;
Combinatorial Optimization; Graph Theory; Information and Coding Theory; Cryptography; Cryptology; Security; Secure Distributed
Computing; Computational Geometry; Computational Topology;
Algorithmic Algebra; Computational Biology; Automata Theory; Formal Verification.
Computer Systems and Software - Computer Architecture; Multi-Core Computing; Parallel and High Performance Computing; Operating Systems;
Storage Systems; Computer Systems Security; Database Systems; Cloud
Computing; Distributed Computing; Modeling and Simulation; Compiler Design; Program Analysis; Programming Languages; Software
Engineering; Adhoc Mobile and Sensor Networks; Graphics and
Visualization.
Intelligent Systems - Data Mining; Data Analytics; Deep Learning;
Information Retrieval; Machine Learning; Pattern Recognition; Reinforcement Learning; Convex Optimization; Stochastic Control and
Optimization; Game Theory; Auctions and Mechanism Design; Electronic
Markets; Social Network Analysis; Cognitive Systems; Natural Language Processing; Computational Neural Modeling, Computational Brain Imaging.
M.E./M.Tech or equivalent Degree in
Computer Science and / or
Engineering, or Electronics or
Electrical Communication
Engineering or Electrical Engineering
or Information Technology or
Information Sciences or allied
disciplines.
BGEC01
Electrical
Communication
Engineering
Communication and Networking; Information Theory; Source Coding;
MIMO Systems; Space-Time and LDPC Codes; Coding for Distributed
Storage and Coded Modulation; Error-Control Coding; Information
Theoretic Security; Wireless Mobile Communication; Multiple Access
Protocols; Cellular Mobile Radio; CDMA; Multiuser/MIMO Detection;
Large-MIMO Systems; Cooperative Communications; MIMO-OFDM;
Spatial Modulation; Communication Networks; Modeling; Analysis;
Optimization and Control of the Internet; wireless access networks; wireless
ad-hoc Networks; Wireless Sensor Networks and the Internet of Things.
Research at the Interfaces of various Networks; Wireless; Social
Transportation; Neuronal; etc. Network Management; Cognitive Radio
Communication; WDM Optical Networks. Optical Communications.
Nanoelectronics and VLSI; Nano-CMOS Technology; Non-Classical
Transistor Design; Transistor Variability in Nanoelectronics; Adaptable
Circuit Design; Integrated MEMS Sensors; Low Power Techniques in
Hardware and Software. Communication Circuits and Architectures.
Analog; Mixed-Signal & RF Circuits; Embedded Systems; Cyber Physical
Systems. Applied Photonics; Photonic Integrated Circuits; Micro-Opto-
Electro-Mechanical Systems (MOEMS); Photonic Bandgap Structures;
Quantum Photonics. Biomedical Optics Biophotonics. Optics and Fluid
Dynamics of Nanostructures; Plasmonics. Signal Processing; Spatial Signal
Processing; Speech and Audio; Speech Recognition and Enhancement.
Music Content Classification; Auditory Model and Hearing Aids.
Compressive Sensing. Sparse Signal Recovery. Statistical Signal
Processing; Signal Detection and Estimation; Space-Time (MIMO) Signal
Processing Algorithms with applications to Wireless Communications;
Acoustic Signal Separation using Microphone Arrays; Indoor Positioning
and Navigation. Microwave Engineering; Passive and Active Circuits (RF
and Microwave). Microwave Imaging Antennas; Fractal Designs in
Electromagnetics; MEMS and Micromachining (RF MEMS); Teraherts
devices for antennas; scattering and imaging. Composite Materials for
Microwave Applications; Computational Electromagnetics.
B.E. / B. Tech or equivalent degree in
Electrical/ Electronics
Communication/
Telecommunication/ Instrumentation/
Biomedical Engineering/ Computer
Science/ Engineering/ Electrical
Engineering or M Sc in Physics/
Mathematics/ Electronics/ Statistics/
Computer Science/ Photonics or
Master’s in Computer Applications or
Graduates of 4-year Bachelor of
Science programmes.
18
Code Department Fields of Specialization Minimum Qualification
BGEE01 Electrical
Engineering
Power Systems and Power Electronics: Power system dynamics,
Development of stabilizing controls for power system, Smart Grids, Power System Protection, High performance computing applications in power
systems, Power electronics applications in power system, Integration of
renewables in weak power grid, Wind-Solar integration, Distributed Generation, Micro-grids, Power quality, Harmonic suppression, Reactive
power control, Power Electronics and Drives, Electric Machines, Pulse
width Modulation, Switch mode power supplies, High frequency isolated inverters, soft-switched converters, Digital control of power converters.
High Voltage Engineering: EHV Power Transmission, Overvoltage
Protection, Lightning Protection, Computational Electromagnetic, Gas
Insulated Systems, Partial Discharges, Insulation Engineering, Condition Monitoring and Diagnostics for HV Power Apparatus, Nanodielectrics,
Environmental applications of electrical discharges.
Systems Science and Signal Processing: Pattern Recognition, Data Mining,
Machine Learning, DSP Theory and Applications, Sparse Signal Processing
& Compressive Sensing, Image and Video Analysis, Computer Vision,
Medical Imaging and Analysis, Optimization, Speech Processing, Sensor
Networks, Event-triggered control, Distributed Systems and Networked Control Systems.
M.E./ M. Tech or equivalent degree in
Electrical, Electronics
Communication, High Voltage
Engineering, Instrumentation,
Computer Science, Information
Technology or Biomedical
Mechanical Engg., Mechatronics,
Aerospace Engineering or related
disciplines.
BGED01
Electronic
Systems
Engineering
Power Electronics & Drives: Control of inverters, multi-level inverters for drives, renewable energy, power supplies
Signal and Information Processing: Information theory, coding and signal processing for magnetic and optical nano- memories, mathematical biology
and applications, quantum information processing and systems architecture.
Communication Networks: Physical layer security, network science, data
center networking, information centric networking, network economics, function computation on networks, optimization and learning over networks,
optimal data transport in sensor, wireless and mesh networks, energy
harvested networked embedded and cyber physical systems, Internet to
Things, smart grids.
Micro and Nano Electronics: Modeling of carrier transport in nano-scale
electron devices at atomistic, device and circuit level, reliability study of
state-of-the-art MOSFET, fabrication of 2D material based transistors, GaN and other power semiconductor devices.
Brain-inspired Computing: Neuromorphic Engineering, ASIC/FPGA VLSI design, analog IC design, brain-inspired algorithms, machine learning,
neuromorphic sensors and their applications and compressive sensing.
Microsystems and Biomedical Devices: Microengineering for clinical
research, Advanced fabrication of microengineering devices using glass, silicon, polymers and integrate with unusual classes of micro/nanomaterials.
Integration of biology/medicine with microtechnology, nanotechnology, and
additive manufacturing, Fabrication of flexible sensors, microsensors, microfluidic devices, and microelectromechanical systems with an emphasis
on cancer diagnosis, therapeutics, e-nose, and biomedical device
technologies.
M.E./ M.Tech or equivalent Degree
with Electronics as one of the
subjects of study.
BGIN01
Instrumentation
and Applied
Physics
Nanoelectronic devices; Quantum Dots (QD); Quantum computation;
Graphene Electronics; Micro and nano systems; Layered 2D materials;
Sensors and related Instrumentation; QD containing optical fibers;
Nanoscale Imaging; Super-Resolution Microscopy and Imaging;
Fluorescence Microscopy; Precision Motion Control; Microfluidics and
Devices;Nano-metrology; Atomic Force Microscopy; Semiconductor
Devices and Circuits; Electrical transport studies in low-dimensional
materials; QD lasers; Quantum measurement and control;
Bioinstrumentation; Materials Science; Electrical and Thermal Contact
Resistance; Fibre-Bragg Grating Sensors; Phase Change Memories; Energy
Systems; Image Processing; Microfluidics and Lab-on-a-Chip;
Interferometry; Computational Imaging; Image Processing;Biomedical
Instrumentation; Optofluidics and Point-of-Care Diagnostics; Optical
metrology; Optical Microscopy.
M.E./ M.Tech in any discipline OR
M.Sc. or equivalent degree in Physics/
Applied Physics/ Engineering
Physics/ Bio-physics/ Materials
Science.
BGMG01 Management
Studies
Bayesian Statistics, Energy and Environmental Policy and Management,
Entrepreneurship, Finance, Human Resource Management, Industrial
Economics, Innovation Management, Knowledge Management, Logistics
and Supply Chain Management, Operations Management, Operations
Research, Organizational Behaviour, Public Policy, R&D Management,
Reliability Theory, Technology Management.
B.E./ B.Tech or equivalent degree in
any discipline or Master’s degree in
Economics, commerce, Mathematics,
Statistics, Psychology, social Work,
Operation Research, Computer
Science/ Application or MBA or
equivalent degree.
19
Code Department Fields of Specialization Minimum Qualification
BGMR01
Materials
Research
Centre
Preparation of Advanced Materials by Physical, Chemical and
Nonequilibrium Routes. Feroelectric and Semiconducting Thin Films,
Multilayers and Hard Coatings; Nanomaterial’s and Composites, Self
Assembly and Nanopatternings; Theoretical and Computational Materials
Science. Ferroic materials, glasses and glass-ceramics, Electro and
Nonlinear Optics. Magnetic materials, Biomaterials.
M.Sc. or equivalent degree in
Materials Science, Chemistry or
Physics or M.E./ M.Tech/ M.Sc.
(Engineering or equivalent degree in
materials Science/ Engineering,
Ceramic Engineering and
Technology.
BGME01 Mechanical
Engineering
Experimental Stress Analysis and Fracture Mechanics, Tribology;
Mechanisms, Robotics and CAD, Fluid Mechanics, Turbulence, Heat
Transfer, Combustion, Laser Diagnostics applied to Thermo-fluid Sciences,
Refrigeration and Air Conditioning, Dynamics, Micro Electro-Mechanical
Systems (MEMS), NanoTribology, Structural Optimization and Design,
Mechanical Properties of Materials, Bio- mechanics, acoustics and noise
control. , Computational Mechanics
M.E./M.Tech.in Mechanical/
Aerospace/ Civil/ Materials/
Chemical Engineering/ Bio-
Technology.
BGMT01 Materials
Engineering
Mechanical Behavior of Metals, Ceramics, Polymers Glasses and Thin
Films. Biomaterials Engineering. Polymer Nano-composites. Organic
Electronics. Sensors. Mineral Processing. Bio-hydrometallurgy. Extractive
Metallurgy. Process Modeling. Physical Metallurgy. Phase Stability and
Transformation. Diffusion. Solidification. Li-ion batteries. Electro-catalysts.
Printed Electronics
M.E. / M.Tech. or equivalent degree
in Metallurgical, Mineral, Chemical,
Ceramics or Mechanical, Electrical,
Electronics or Materials Science/
Engineering or Biotechnology,
Polymers
BGPD01 Product Design
Computer Aided Engineering Tools for Product Design, Vehicle
Crashworthiness and occupant Safety, Occupational Health and Safety,
Product Safety, Computer Aided Ergonomics, Human Engineering, Digital
Human Modelling, Biomechanics, Kinesiology, Biosensors, Computer
Aided Design and Usability Studies, Haptics Integrated Design interfaces,
knowledge Management, Product Life Cycle Management, Artificial
Intelligence in Design, Design for Environment, Design Creativity
Collaborative Design, Design Synthesis, Requirements Engineering, Design
Methodology, Clinical and Rehabilitation Engineering, Human-Machine
Interaction, Smart Manufacturing, Sustainability, Medical
diagonistics/therapeutics, Eco-Design, Life Cycle Assessment, Sustainbility
Analysis, Bio-composite, Additive Manufacturing, Sustainable
Manufacturing, Computational Metrology, Human Computer Interaction,
Multi Model Interaction, Automotive User Interface Assistive Technology,
Bio-Medical Devices, Co- Design, Collobaration and Open Source Design.
M.E./M.Tech. or Equivalent degree in
Design, any branch of Engineering,
Architecture, Instrumentation and
medicine or Master’s degree in
physics, Mathematics, Computer
Sciences, Physiology Psychology or
B.E. / B.Tech. or equivalent degree in
Design, any branch of Engineering,
Architecture Instrumentation.
BGMA01 Mathematics
Partial Differential Equations, Homogenization, Controllability, Nonlinear
Dynamics and Chaos, Time Series Analysis with Applications to
Neuroscience, Probability and Stochastic Processes, Stochastic Control,
Stochastic Dynamic Games, Random Matrix Theory, Functional Analysis,
Operator Theory, Algebraic Topology, Differential Topology, Commutative
Algebra, Algebraic Geometry, Harmonic Analysis, Several Complex
variables, Differential Geometry, Mathematical Finance, Low Dimensional
Topology, Numerical Analysis, Number Theory, Combinatorics, Statistical
Mechanics, Representation Theory, Combinatorial Topology
M.Sc. or equivalent degree in
Mathematics, Statistics, Physics or
any branch of Mathematical Sciences
or BE / B.Tech. or equivalent degree
(provided they have good aptitude for
Mathematics).
BGST01
Centre for
Sustainable
Technologies
Water quality and sustainable supply; Water and sanitation; Renewable
energy; solar, biomass combustion and gasification, biomethanation, bio-
fuels, etc. Energy planning, demand side management, energy efficiency;
Alternative building technologies and materials, energy efficient and
environmentally sound technologies; Climate- responsive architecture/
building technology; Building Integrated Photovoltaics (BIPV) and Green
Buildings; Building-comfort studies in tropical regions; Waste management;
reuse and recycling; Natural Resources Management; Climate change
mitigation; Smart /efficient Turbines for renewable energy applications,
Waste to Energy.
M.Arch. or M.E./ M.Tech./ M.Sc.
(Engg.)/ Architecture, in Mechanical,
Civil, Chemical including Renewable
Energy, Environmental Engineering,
Energy Studies or MSc
(Environmental Sciences)
20
Code Department Fields of Specialization Minimum Qualification
BGPH01 Physics
(A) Experimental studies in
I. Condensed Matter Physics
II. Atomic, Optical Physics, and Specific areas include: Raman and other
Spectroscopy, Fast Ionic Conductivity, Manipulation of Matter by Light,
Laser Cooling and trapping of atoms, Ion trapping, Precision Laser
Spectroscopy, Magnetism, Spintronics, Magnetic thin films, Magneto-
transport, quantum transport in low- dimensional and disordered materials,
the metal-insulator transition, Magnetic Resonance Phenomena, Nano
science and nanomaterial’s, Superconductivity in bulk as well as thin films,
Semiconductors, Ferro electricity, Crystal Growth Studies, Nonlinear
Optical Materials, Phase Transition Studies, High Pressure and Low
Temperature Studies, Study of Low Dimensional Materials, Amorphous
Systems, Soft Condensed Matter: colloids, surfactants and biological
materials, Polymer Physics, SurfaceX-ray scattering, surface phase
transitions, Thermoelectrics.
(B)Theoretical Studies on a variety of aspects of condensed matter physics,
in particular; Strongly Correlated Systems, Quantum many-body theory and
magnetism, exotic order and quantum criticality; Phase transitions,
equilibrium statistical physics; Disordered and Amorphous Systems, the
glass transition, neural networks, Spatiotemporal Chaos and Turbulence in
fluids, plasmas and cardiac tissue; Soft condensed matter: colloids,
surfactants, membranes, liquid crystals, vortex lattices; biological physics:
the mechanics of living matter; Molecular modeling of soft and bio-
materials.
ME / M.Tech/ M.Sc. (Engineering or
equivalent degree or M.Sc. or
equivalent degree in Physics,
Biophysics, Biotechnology,
Mathematics, Chemistry or Polymer
Science or B.E./ B.Tech. or equivalent
degree or B.Sc. or equivalent degree
followed by AMIE, Grad, IETE,
AMII ChE, AMIIM, AMAeSI.
BGCD01
Computational
& Data
Sciences
Bio-molecular Computation, Computational Electrodynamics, Computational Photonics, Computational Fluid Mechanics, Computational
Mathematics/Scientific Computation, Finite Element Analysis, High
Performance Computing (HPC), Medical Imaging, Numerical Linear Algebra, and Structural Biology & Bio-Computing.
Computer Aided Design, Cloud Computing Systems, Distributed Systems,
Data Sciences, Big Data Platforms, Computer Vision and Image/Video
Analytics, Database Systems, Embedded System-On-Chip Architectures, High Performance Computing Systems, Machine Learning, Natural
Language Processing, Deep Learning for Vision and Language, Parallel
Computing.
M.E./ M.Tech./ M.Sc.(Engg.) or
equivalent degree in any discipline
BGES01 Centre for
Earth Sciences
Application of major & trace element .geochemistry, radiogenic, traditional
& non-traditional stable isotope geochemistry to modern day & early Earth
processes; paleoclimate reconstruction, Earthquake Geology and Seismic
Hazard Assessment, Subduction Zone Tectonics and Active Deformation,
Himalayan Seismicity-Tectonics and Evolution, Role of Fluids in Faulting
Processes, Paleo seismology and Active Tectonics, Geochronology,
Petrology.
B.E./B.Tech or equivalent degree in
any discipline or M Sc. or
equivalent degree in any branch of
Science.
21
2. Indian Institute of Technology Bombay, Mumbai 400 076 – BM
In all cases, the minimum eligibility is a First class or equivalent (Min. 60%) Master’s Degree in Engineering / Technology (55% for SC/ST) OR a First class or equivalent (Min. 60%) Master’s degree in Science (55% for SC/ST) or a first class or equivalent (Min. 60%) in Bachelor’s degree in Engineering /
Technology (55% for SC/ST).
Code Department Fields of Specialization Minimum Qualification
BMAE01 Aerospace
Engineering
Aerodynamics
Dynamics and Control
Aerospace Propulsion
Aerospace Structures
(i) M.Tech./ M.E. or equivalent degree in
Aerospace Engineering
OR in other branches of engineering relevant to
the research areas in the
department (ii) B.Tech./B.E. or
equivalent degree in
Aerospace Engineering OR in other branches of
engineering relevant to
the research areas in the
department OR
M.Sc. or equivalent
degree in Mathematics OR Physics OR in other
specializations relevant to
the research areas in the department.
BMCE01
Civil
Engineering
(Code no. of
specialization
to be indicated
in the
datasheet)
Transportation Systems Engineering
M.Tech or Equivalent degree in Civil
Engineering The
minimum eligibility is a First class or equivalent
(Min 60%) Master’s
Degree in Engineering/
Technology (55% for
SC/ST).
BMCE02 Geotechnical Engineering
BMCE03 Water Resources Engineering
BMCE04 Structural Engineering
BMCE05 Ocean Engineering
BMCE06 Remote sensing
BMCE07 Construction Technology & Management
BMES01 Earth
Sciences
Basin Analysis, Biostratigraphy, Engineering, Geology, Fluid Inclusion, Geochemistry, Geochronology, Geomorphology, Geostatistics, GPS Geodesy, Hydrogeochemistry,
Hydrogeology, Igneous Petrology, Metamorphic Petrology, Micropalaeontology, Micro-
structural studies and modeling, Mineralogy and Tectonics, Mining Geology, Neotectonics, Ore Geology, Ore Petrology, Organic geochemistry, Petroleum Geology,
Remote Sensing, Rock Mechanics, Sedimentology, Structural Geology, Tectonics,
Volcanology, Earthquake Seismology, Geo-electromagnetic induction, Gravity and Magnetics, Numerical modeling in Geophysics, Petrophysics, Seismic Imaging &
Inversion, Seismotectonics, Solid Earth Geophysics, Wavelet analysis of Geophysical
data Electrical Methods. Shallow Subsurface geophysical investigations.
1) M.Sc./ M.Tech. degree
in Geology/ Geophysics/
Geochemistry
2) M.Sc./ M.Tech./ M.Sc.
(Tech)/ M.Phil (2yr) degree in Physics,
Chemistry, Mathematics,
Life Sciences, Marin Sciences, Atmospheric
Sciences or equivalent
and having Geology/ Physics/ Geochemistry at
the B.Sc. stage as
principle subjects.
B.E/ M.E in Civil/
Mining Engineering/ Enviromental
Engineering.
BMCS01
Computer
Science and
Engineering
Computer Graphics, Computer Vision, Image Understanding and Retrieval, Database and
Information Systems, Hypertext Mining and Information Retrieval, Data Dissemination Networks, Programmeming Languages and Compilers, Computer Networks,
Performance Modeling and Distributed Systems, Algorithms, Combinatorics, Graph
Theory, Artificial Intelligence, Natural Language Processing, Machine Learning, Software Engineering, Formal Specification, Design and Verification of Biologically
Inspired Computing, Logic and Automata Theory, Real Time and Embedded Systems,
Computer Security and Cryptopgraphy.
M.E / M.Tech. in CS&E with at least 60% marks
or M.E /M.Tech. in any
branch with 5 years teaching experience in
CS&E.
BMCY01 Chemistry
Theoretical/ Computational Chemistry – Main Group - Transition Metal Chemistry.
Organometallics – Electrochemistry/ Conducting Polymers – Ultrafast Spectroscopy –
Organic Synthesis – Peptide Synthesis, Enzyme Mechanism = Homogeneous/ Heterogeneous Catalysis – Physical inorganic Chemistry – Protein Folding. Theoretical
Organic Chemistry – Photochemistry, Photobiology – Statistical Mechanics – Chemical
& Biosensors, Single Molecule Spectroscopy, Structural Biology, Bioorganic, Bioorganic and Biophysical chemistry. Biological Thermodynamics.
M.Sc. or equivalent
degree in Chemistry/ Bio-
chemistry/ Bio-technology. Candidates with Master
degree in science must have valid GATE score to
become eligible for the
Teaching/ Research Assistantship provided by
the Institute.
22
Code Department Fields of Specialization Minimum Qualification
BMCH01 Chemical
Engineering
Process Systems Engineering: Process Simulation, Optimization, Process Integration
and Scheduling, Energy Conservation and Optimal Resource Management. Artificial
Intelligence and Mathematical Modelling, Multi-scale Modelling, Systems Identification
and Process Safety Analysis, Nonlinear control, fault diagnosis.
Biotechnology & Bio-Systems Engineering: Metabolic & Genetic Engineering, Bio-
separations, Bio-informatics, Systems Biology, Drug Discovery, Enzymology,
Bioprocess Development, Bio-fuels.
Materials Engineering: Polymer materials, Polymer Reaction Engineering Polymer
Processing, Polymer Physics, Polyurethane , Rubber, Polymer Rheology, Ceramics,
Polymer Biomaterials, Drug Deliver, Food Engineering Microscopy Nano-composites,
Statistical Thermodynamics, and Supercritical Fluids.
Catalysis & Reaction Engineering: Catalysis, Multiphase Reaction, Bio-reaction
Engineering and Reactor Modelling. Process intensification & reactive distillation,
micro-reactors.
Transport, Colloids & Interface Science: Granular flows. Power Mixing, Membrane
Separations, Rheology of Complex Fluids, Colloids, Sol-gels, Emulsions & Foams,
Paints and Coatings, Microstructural Engineering, Aerosols, Electro-hydrodynamics,
Fluid Mechanics & Stability, Computational Fluid Dynamics, Heat & Mass transfer,
Porous media, and Surfactants, micro-fluidics.
Energy and Environment: Climate change, Coal Gasification, Energy Integration,
Green Engineering, Renewable Resources, Waste Management, Pollution Control, Air
Pollution Prediction & Control, sustainability studies.
Thermodynamics and Molecular Simulations: Properly prediction through molecular
simulation, fuel cell, catalytic properties, biological systems, polymers.
Master’s degree in Engg./
Technology or
Bachelor’s degree in
Engg./ Tech. or Master’s
degree in Science
disciplines consistent
with the research areas of
the departments.
BMEE01
Electrical
Engineering
Communication Engineering: Communication Systems, Communication Networks and
Internet, Computational Electromagnetics, Image Processing and Computer Vision,
Microwaves, RF and Antennas, Multimedia Systems, Optical Communication and
Photonics, Signal Processing, Speech Processing, Wireless and Mobile Communication,
Information Theory and Coding, Magnetic Resonance Imaging.
I. For General category
students and/ or for students where no
concession in academic
performance is called for eligibility requires
meeting ANY ONE of the
following criteria as regards performance in
the qualifying degree.
1. A minimum of 60%
marks in the final
academic year of the programme.
2. A minimum of 60%
marks in aggregate or as specified by the university
(any one of them).
3. A 1st class as specified by the university.
4. A minimum CPI of 6.0
on the scale of 10; with corresponding proportional
requirements when scales
are other than on 10 – for example, on a scale of 8,
the minimum will be 4.8
For Students from the SC/ ST category the
corresponding criteria are:
1. A minimum of 55%
marks in the final
academic year of the programme
2. A minimum of 55%
marks in aggregate or as specified by the university
(any one of them)
3. A first class as specified by the University.
4. A minimum CPI of 5.5 on
the scale of 10; with corresponding proportional requirements when the
scales are other than on
10-for example, one a
BMEE02
Control & Computing: Linear systems Theory, Optimal Control & Optimization,
Modeling and Identification of Dynamical Systems, Control of Distributed Parameters
Systems, Non-Linear Systems, Modern Filter & Network Theory, Behavioral Systems
Theory, Computational Methods in Electrical Engineering Software and System
Reliability Cryptography and Security, GPU-based Computing.
BMEE03
Power Electronics & Power Systems: FACTS, HVDC and Power Quality, Distributed
Generation, Power System Restructuring, Wide Area Measurements and System Protection, EMI/ EMC, Coupled Field computations, Electrical Machines; Modeling,
Analysis, Design and Control, Special Machines, Power Electronic Converters, Electric
Drives, Power Electronics for Non-Conventional Energy Sources, Reliability in Power Systems and Power Electronic Systems, Smart Grids for Energy Harvesting.
23
Code Department Fields of Specialization Minimum Qualification
BMEE04
Microelectronics: Devices & IC Technology, Reliability of Electronics Devices and
Circuits, Device Simulation and Modeling, VLSI and System Hardware Design, CAD
Tools, MEMS Design and Technology (including Bio-MEMS), Flash Memory Devices,
Organic Semiconductor Devices, CMOS Devices, Spintronic Devices, Photovoltaic
Devices, Material Growth and Characterization.
scale of 8, the minimum
will be 4.4
II. The qualifying degrees
are as following: B.E./ B.Tech./ M.E./
M.Tech./ Biomedical
Engg., Computer Science, Computer Science and
Engg., Computer Engg.,
Electrical Engineering, Electronics Engineering,
Telecommunications
Engg., Instrumentation Engg., Engg. Physics,
Materials Science and
Engineering. Master of Science (M.Sc.) Physics,
Mathematics, Electronics/
Electronic Sciences.
III. The admission of a
student as a Ph.D Candidate shall be
confirmed only after
he/she has successfully completed the prescribed
coursework and the
comprehensive qualifier examination. A student
who is unsuccessful in the
comprehensive qualifier even after the prescribed
number of attempts shall
have to discontinue the
Ph.D Programme.
BMEE05 Electrical
Engineering
Electronics Systems, Electronic Instrumentation, Signal Processing Applications, Speech
and Audio Processing, Bio-medical Electronics, Embedded System Design.
BMMA01 Mathematics
Algebra: Commutative Algebra, Hilbert functions, Blowup algebras, Local cohomology,
Hopf, Algebras, Coxter Groups. Homological algebra, Gorenstein rings.
Analysis: Functional Analysis, Operator Theory, unbounded subnormals, Hilbert
modules, Numerical Functional Analysis, Approximate Solutions of operator equations
and eigen value problems, Spline Theory, Numerical Functional Analysis, Real Analysis,
Mean periodic functions, Generalized integrals. Several Complex Variables. Harmonic
Analysis on LIE Groups
Combinatorics: Combinatorics, Posets, Generating functions, Polyhedral
Combinatorics.,Extremal Combinatorics, Probabilistic methods, Design theory,
Arithmetic and Boolean circuit complexity, Randomness and Lower bounds, Explicit
constructions of pseudorandom combinatorial objects.
Geometry and Topology: Algebraic Geometry and Combinatorics, Schubert varieties,
Linear codes, Varieties over finite fields, Algebraic Topology, Operads, Differential
Geometry, Harmonic Manifolds, Algebraic & Differential Topology, Topology of Matrix
varieties. Stable homotopy theory, Algebraic -theory, Combinatorial Topology.
Number Theory: Number Theory, Automorphic Forms, Representation theory of p-adic
groups. Representations of Algebraic Groups, L-functions, Converse Theorems.
PDE and Numerical Analysis: Numerical Analysis, Applied Mathematics, Finite
Element Methods, Finite volume methods. Hyperbolic systems of quasilinear partial
differential equations, Non-linear waves, Partial Differential Equations, Shock waves in
hyperbolic systems of conservation laws, partial integro-differential equations, Visco-
elastic fluid-flow problems, Control of PDEs
Statistics and Probability: Statistical Data mining, Computational Biology, Biostatistics,
Bioinformatics, Probabilistic optimization problems in Molecular Biology, Reliability
Theory, Industrial Statistics, Construction of reliability test plans, Statistical Inference,
Geostatistics, Modeling bivariate distributions, Stochastic Differential Game Theory,
Risk-sensitive control theory, Stochastic control Mathematical Finance, Applied
Probability, Poisson and compound poison approximations, Estimation after selection,
Reliability test plan. Statistical signal processing, Time series analysis, Reliability
analysis, High dimensional multivariate analysis, Non-Parametric curve estimation,
Statistical machine learning. Large dimensional random matrices, Free probability,
Extreme value theory and Statistics.
First Class Master degree
in Maths/ Statistics/
Computer Science
24
Code Department Fields of Specialization Minimum Qualification
BMME01
Mechanical
Engineering
Thermal and fluid Engineering: Convective and Radiative Heat Transfer, Two-Phase
Flow, Bio-heat transfer, Whole-field optical measurements, Heat transfer enhancement,
Electronic cooling, Numerical Techniques, Combustion and Flames, Petrol and Diesel
Engines, Gas Turbine, Nuclear Engineering, Reactor Neutronics Reactor Heat Transfer,
Fluid Mechanics, Fluid Machinery, Turbulence, Compressible flows, Geo-physical flows,
Micro Fluidics, Rarefied gas flow, Porous media, Fluid-structure interaction, Fuel Cells,
Computational Fluid Dynamics, Refrigeration, AC Systems, Cryogenics, Heat Pumps,
Cryogenic heat exchangers, cryocoolers, green transport refrigeration, Non-equilibrium
thermodynamics, Bio-microdevices.
Design Engineering: Stress Analysis using Analytical and Numerical Methods, Studies
of Failure Due to Fatigue and Fracture, Fracture Mechanics, Application of Finite and
Boundary Element Methods, System Modeling, Control and Automation, Kinematics,
Machine Dynamics, Synthesis of Mechanisms, Robotics, Mechatronics, Tribology Design
of Elements and Systems, Optimization, CAD, Interactive Graphics, Vibration, Noise and
Acoustics, MEMS, Vehicles Dynamics, Smart Materials and Structures, NDT.
Manufacturing Engineering: Machining, casting, Welding, Forming, Tool design,
Modeling and Simulation of Manufacturing Processes and Systems, Manufacturing
Automation and Control, CAD/CAM/CIM, Feature Based Modeling, Computer Aided
Process Planning, Intelligent Product Design and Manufacturing, Application of AI in
Manufacturing, Supply Chain Modeling, Manufacturing Analytics, Reliability
Engineering, Maintenance Planning, Logistics, Micromachining, Microsystems
Fabrication, Sensors and Actuators, Packaging, Deformation Science, Computational
Mechanics, Integrated Computational Materials Engineering, Multiscale Modeling,
Additive Manufacturing, Sustainable manufacturing, Powder Metallurgy, Electric
Vehicles, Modeling and simulation of multi-scale phenomena in materials processing,
Experimental studies of materials (nano and micro scale involving advanced microscopy).
First Class (or 60%
minimum) and (55% for
SC / ST) in the qualifying
degree in the various
branches of Engineering
such as Mechanical Engg./
Production Engineering/
Industrial Engineering./
Aerospace Engineering/
Chemical Engineering.,
Metallurgical Engg, Civil
(Structural) Engineering/
Automobile Engineering/
Applied Mechanics.
Engineering/ Mechatronics
Engg./ Instrumentation &
Controls. Engg./ Laser
Technology, Engineering,
Materials Technology,
Biomechanics.
M.Tech from IITs with
CPI >= 8.5 can be directly
called for the interviews.
BMME02
BMME03
BMMM01
Metallurgical
Engineering
and Materials
Science
i. Metals
Process analysis, instrumentation and control, Iron and Steel making, deformation
behavior and microstructure evolution during creep and super plasticity, mineral
processing and extractive metallurgy, metal forming, mechanical behavior, welding,
physical metallurgy, phase transformation, structure property relationship,
thermomechanical processing and texture analysis.
ii. Ceramics
Electronic ceramics, bioceramics, glass ceramics, ceramic foams, industrial ceramics, IR
transmitting glasses, near net shape forming, gel casting, rheology of suspensions.
iii. Semiconductors and Magnetic Materials
Devices of thin film elemental semiconductors and alloy systems, surface treatment and
surface engineering, chemical vapor deposition, structure property correlation in
nanocrystalline magnetic materials, magnetoresistor materials. In addition, research into
materials for sensors and batteries, superconductors, synthesis and processing of ion
conductors, materials for energy generation and storage is going on in the Department.
iv. Polymers and Composites
Polymer blends, Polymer carbon nanotube composites, metal-matrix composites, structure
property relations.
v. Wear and Corrosion
Fracture and failure, localized corrosion, alloy development passivity, Stress Corrosion
cracking, weld related corrosion, protective coating, high temperature corrosion
vi. Modeling and Simulations
Modeling of metallurgical processes, heat and mass transport, modeling of metal forming,
Optimization, Monte Carlo simulations, Dislocation dynamics simulations
M.Tech./M.E. or
equivalent degree in
Engineering/Technology.
B.Tech./B.E. or
equivalent degree in
Engineering/Technology.
M.Sc. or equivalent
degree in Chemistry,
Materials Science,
Physics and related
science streams.
Mathematics as a subject
at the B.Sc. level is
mandatory.
BMPH01
Physics
Condensed Matter Physics (Experimental and Theoretical) In all cases the minimum
eligibility is a First Class
or equivalent (Min. 60%) Master’s Degree in
Engineering/ Technology
(55% for SC/ST) OR a
First Class or equivalent
(Minimum 60%) Master’s degree in Science (55%
for SC/ST) or a First Class
or equivalent (Min.60%) in Bachelor’s degree in
Engineering/ Technology
(55% for SC/ST).
BMPH03 Photonics and Spectroscopy (Experimental and Theoretical)
BMPH04 High Energy Physics (Experimental and Theoretical)
BMPH06 Soft Condensed Matter Physics (Theory)
25
BMHS01 Humanities and
Social Science
Economics:- Microeconomics, Open-economy Macroeconomics, Econometrics,
Environmental Economics, International Trade and Finance, Indian Economy, Analysis of
economic Policies, Productivity: Measurement, Comparisons and Determinants,
Development Economics, Industrial Economics, International Business, Industry-
Environment Linkages, Socio-Economic Impacts of Climate Change, Energy Economics,
Green Accounting, Development Policy, Natural resource and Water resource Economics,
Climate change, Environmental Policy, Financial economics, Monetary Economics,
Industrial Economics, Strategic Trade Theory and Policy, Corporate Investment: Theory
and Econometric Applications, Health Economics, Development Economics,. Corporate
governance, Labour economics, Development economics, Mechanism design, Bargaining
and Group formation, and Auction theory, Axiomatic study of resource allocation, Child
labour, Game Theory, Behavioural Economics, Experimental Economics, Development
Economics, Agricultural Economics
English:- Narratology, intertextuality, Victorian Novel, Indian Writing in English, Films
and Disnarration, Women's Studies, Autobiography Studies, "Crisis" inEnglish Studies,
African American Writing Morpho-Syntax, Linguistic Theory, First Language
Acquisition, Endangered Languages Documentation, The Partition of 1947, the 'Turbulent
40s' in Bengal, South Asian Fiction--in English and in Translation, Postcolonial Theory
and Literature, Feminist Theory and Women's Writing, Cultural Studies, Feminist Theory,
Literary Theory, Film Studies, Regional Literatures, and Cultures in India, Environmental
Sociology, Social and Environmental Movements, Environmental Politics with a focus on
Social inequality and Natural Resource Conflicts especially in Rural India. Issues of
livelihood and problems of marginalized class and Political Ecology, Adaptation Studies,
,Shakespeare and Renaissance Drama, European Literature, 19th Century Bengali
Literature, Literature and Other Arts, Translation Studies, World Literature, Historical
Musicology & Ethnomusicology.
Philosophy:- Metaphysics, Philosophy of Science, Philosophical Logic, Philosophy of
Language, Professional Ethics, Philosophy of Wittgenstein, Sartre, Kripke, Quine, Moore,
Hare, Bhartrahari, Philosophy of Mind, Philosophy of Education and Environmental
Ethics, Indian Philosophy and Comparative Philosophy, Buddhist Philosophy, Sankhya
Philosophy and Vedanta Philosophy, Philosophy of Artificial Intelligence, Philosophy of
Mind, Cognitive Science, Analytic Philosophy, Twentieth Century European Philosophy;
Moral, Social and Political Philosophy, Social Epistemology, Moral theory, Alfred
Korzybski- 'General Semantics' and related areas, Philosophy of Language, Wittgenstein,
Culture and Value, Ethics/Moral Philosophy, Social and Political Philosophy, Classical
American Pragmatism, Feminist Philosophy, Twentieth century Continental Philosophy
20th Century Continental Philosophy: Heidegger, Foucault, Husserl, Gadamer,
Phenomenology and Hermeneutics, Epistemology: Implications of the Historicity of
Knowledge for its Universal Validity Metaphysics: Implications of an Ontology of Events
for Political Philosophy History of Western Philosophy
Psychology:- Psychological Perspectives and Theory, Organizational Behaviour,
Personality Studies, Qualified MBTI user, Organizational Culture and Values, Role of
Psychology in Development - Health and Contraceptive Use, Developmental
Neuropsychology, Education and Child Development, Eyewitness Testimony, Cognitive
Ergonomics, EEG / Event Related Potential, Working Memory and Prospective Memory
and Developmental Dyslexia, Organization behavior, HRM,Culture and Values in
organizations, Personality studies, Positive organization behavior and well-being.
Sociology:- Urban Studies, Development Studies, Rural/Agrarian Sociology, Law and
Governance Legal Pluralism, Vulnerability and Adaptation to Climate Change, Gender
and Development, Disaster Studies, Ethnicity and Multiculturalism, Urban Studies,
Sociological Theory, Sociology of Development, Anthropology of corruption,
constitutional law, sociology of higher education, sociology of religion and kinship,
conversion, Christianity in India. Caste today, religious institutions,
hierarchy/stratification, sociology in/of India, contemporary Karnataka, Sociology of
Development and Environment, Natural Resource Conflicts, Issues of livelihoods and
problems of marginalized class, resource rights, subaltern resistance and movements and
Political Ecology, Sociology and political economy Of finance, Political economy of
development, Indian political economy, Theories of money, Classical political economy,
New and old Institutionalism and History of economic thought, Issues of gender and
sexuality, medical anthropology, anthropology of the body and embodiment, post- colonial
studies, post-modern feminist studies and Southern theories, Caste, Civility and
Democracy, Civil Society Ethnography Studies, Inclusion and Exclusion.
Cell for Indian Science and Technology in Sanskrit: - Indian Science and Technology,
Indian Philosophy, Logic and Epistemology, Sanskrit language, Paninian Grammar,
Philosophy of Language.
i) Master's degree in
Arts/Commerce or
equivalent degree in allied
subjects with a
minimumof 55% marks
(50% for SC/ST).
OR
ii) Master’s Degree in
Engineering/ Technology
or equivalent degree, with
First class or 60% marks
(55% marks for SC/ST).
OR
iii) Bachelor’s degree in
Engineering/Technology
with First class or 60%
marks (55% marks for
SC/ST).
OR
iv) Master’s degree in
Science or equivalent
degree, with First class or
60% marks (55% marks
for SC/ST).
26
Code Department Fields of Specialization Minimum Qualification
BMBS01
Bioscience &
Bioengineering
BIOTECHNOLOGY (BT)
Research Areas:
Engineering, enzyme inhibitor design, peptide synthesis; protein structure, function and
engineering; yeast molecular biology, transcriptional regulation of gene expression;
microtubule dynamics and cancer chemotherapy, immunology, signal transduction,
Glycobiology; molecular and membrane biochemistry: proteomics and systems biology,
bacterial cell division, protein aggregation and neurodegenerative diseases, computational
biology of nucleosome dynamics, Chromatin assembly and statistical dynamics,
cytoskeletal dynamics, chromosome segregation during mitosis and meiosis in yeast.
Regulation of gene expression in the malaria parasite, bioinformatics of parasite genomes,
Autoimmunity, Cancer Immunotherapy, Tissue Resident T Cells, Cancer Biomarker.
Minimum Eligibility for
Admission:
1. First Class or 60%
marks (55% for SC/ST) in M.Sc or equivalent degree
in subjects related to Life
Sciences/ Physics/ Chemistry OR B.Tech
Bio-technology with: a
valid GATE score (eligible for Institute
TAship/ RAship) OR a
valid CSIR/ UGC/ DBT JRF (eligible for FA
category) OR a valid
ICMR JRF (not linked to ICMR project) (eligible
for FA category) OR Two
year of relevant post M.Sc research experience
(eligible only for project
positions) OR UGC/ CSIR (Lectureship)
eligible only for project
position. 2. First Class or 60%
marks (55% for SC/ST) in
M.Tech or equivalent degree in Biotechnology.
BMBS02
BIOMEDICAL ENGINEERING (BME)
Research Areas:
Bioinstrumentation for diagnostics and therapeutics, Biomaterials, prostheses and medical devices, Physiological system modeling and analysis. Bioinstrumentation for early
detection of carcinoma and tropical diseases, Biomedical transducers and sensors
including biosensors and bioMEMS devices, Biostatics and mathematical modeling, Cardiac electrophysiology and muscle mechanics, Development and validation of novel
biomaterials and implantable devices, Hemorheology and microcirculation, Neurophysiology, prosthetic devices including aids for the handicapped, Signal
processing, Telemedicine and knowledge based systems, Autoimmunity, Cancer
Immunotherapy, Tissue Resident T Cells, Cancer Biomarker.
Minimum Eligibility for
Admission:
First Class or 60% marks
(55% for SC/ST) in :
M.Tech/ M.E. or B.Tech/
B.E. in Bio-medical, Chemical, Computer
Science, Electrical,
Electronics, Tele-communications, Ins-
trumentation &
Mechanical Engg., and Engineering Physics OR
M.Sc. or equivalent in Bio-chemistry, Bio-
physics, Bio-technology,
Ceramics, Chemistry,
Electronics, Egronomics,
Material Science,
Mathematics, Molecular Biology, Physics and
Physiology. OR
First class/division in MBBS degree in
occupational Physio-therapy, with AIMS (PG
Entrance Test)/ MCI
entrance examination for MD/MS (for Medical
graduate)/ MBBS with
MD/MS OR
M. Pharm, B. Pharm with
entrance examination
GPAT.
27
Code Department Fields of Specialization Minimum Qualification
BMEV01
Environmental
Science &
Engineering
Environmental Monitoring, Industrial Air & Water Pollution Control, Solid and
Hazardous Waste Management, Air & Water Quality Modeling, Environmental Systems
Optimization, Environmental Microbiology & Biotechnology, Bioremediation, Indoor Air
Quality, Aerosol Science and Technology, Environmental Impact Assessment and Global
Issues.
Master of Technology/
Engineering Bachelor of
Engineering degree in
Agricultural, Chemical,
Civil, Energy, Bio-
technology, Environ-
mental, Mechanical
Metallurgical and Mining
Engineering or a Master
of Science degree in
Atmospheric Science,
Bio-chemistry, Bio-
technology, Chemistry,
Earth Sciences, Environ-
mental Toxicology,
Environmental Sciences,
Meteorology, Micro-
biology and Physics for
M.Sc. graduates,
Mathematics is
mandatory at Higher
Secondary/ Intermediate/
(10+2) level.
BMIO01
Industrial
Engineering
and Operations
Research
The group is interested in research related to modeling, quantitative analysis and optimal
resource allocation from decision problems in deterministic and stochastic contexts. Broad
areas of application are in supply chains, logistics, transport including railways,
manufacturing systems, finance, services, infrastructure and other industrial systems;
application of quantitative methods in quality and maintenance management systems;
development and application of decision support, intelligent and knowledge-based
systems.
The specific problems of research interests include: production planning, scheduling
and control systems; management of inventories in production, distribution and service
systems; industrial scheduling, facilities planning, project management, quality
management, materials management and productivity management; Data Analytics &
Data Management Supply chain analysis, reverse logistics, closed-loop supply chains and
RFID applications, product variety management.
Operations Research applications in management of technology and resource allocation;
Convex optimization; mixed-integer programmeming; Markov decision processes; optimal
control in deterministic and stochastic systems; (differential) game theory; applications of
game theory; modeling and simulation of supply chains, manufacturing and service
systems; theory and applications of distributed and hybrid simulations, discrete event and
system dynamics simulations; applied stochastic models; scheduling and control of
railways and other transport operations; time tabling of services, crew and vehicle
scheduling for transport operations; optimization and design problems arising from e-
commerce, including auctions and mechanism design for electronic exchanges; risk
analysis and contract design; revenue management; quantitative models for financial
engineering. Supervised learning & Unsupervised Learning; Online & reinforcement
Learning. Development and applications of modern information systems for managing
manufacturing, supply chain and service organizations. Deep Learning, Longitudinal data
analysis, Kernel methods.
The IEOR programme is unique in its contemporary flavor, with new courses in Financial
Engineering, Supply Chain Management, Game Theory, Markov decision process, System
Dynamics, Machine Learning. Services Management, Manufacturing systems to name a
f ew. The programme is equally strong in background building, with updated courses in
Optimization Techniques, Stochastic Models, Simulation, and Knowledge-based systems.
a) First class Master's
degree in any branch of
Engineering with
adequate exposure to
Industrial Engg. and
Operations Research.
b) First class M.Sc. in
Mathematics, Statistics
or Operations Research
with excellent academic
record.
c) First Class Bachelor’s
degree in any branch of
Engineering with an
excellent academic
record.
28
Code Department Fields of Specialization Minimum Qualification
BMSC01
Systems and
Control
Engineering
Geometric mechanics, differential geometry, nonlinear control, satellite and space-craft
dynamics, robotics
Higher order sliding mode control and observation, adaptive sliding mode control for
discrete-time system
Optimization-based control, control under communication constraints, stochastic
control, switched and hybrid systems
Game theory, optimization, economics, information theory and combinatorics, systems
biology
Global optimization, GPU supercomputing, fractional order differentiation and
applications
Cooperative control, guidance of autonomous vechicles, resource allocation
Adaptive control, decentralized adaption, multi-agent systems, time-varying feedback
Embedded control systems, path planning of autonomous vehicles, vision based
navigation, hardware/software co-design
Distributed parameter systems, output regulation, periodic systems, parameter
identification in PDEs, hardware/software co-design
Control theory, nonlinear and geometric control, NMR spectroscopy, quantum control.
First class M.E. or
M.Tech. in Aerospace/
Chemical/ Electrical/
Electronics/ Instru-
mentation/ Mechanical/
Metallurgical Engg./
Systems & Control
Engineering.
Candidates interested in
pursuing a Ph.D. should
identify and communicate
with atleast a couple of
faculty members of the
group with whom their
research interests match.
The names of these faculty
members should
preferably be mentioned in
the application form.
This is a pre-requisite for
short-listing.
BMEN01
Energy
Science and
Engineering
Energy Efficiency / Improvements in conventional Energy Systems: Heat pumps,
Energy integration, Process integration for resource optimization, Pinch Analysis -
Development of techniques for optimization of Utility systems, Demand Side
Management/ Load Management in the Power Sector, Variable Speed Drives, Power
Generation and Systems Planning, Energy Management and Auditing, Efficient Motor
Drive Systems, Electronics Ballasts, Static VAR compensators, Illumination control,
Power Electronics in Energy Efficient Systems, Electric Vehicles, Boilers and Fluidised
Bed Combustion, Exhaust Heat Recovery, Cogeneration, Building Energy Management,
Efficient Air Conditioning Systems, Hydrogen Generation and Storage, Thermal energy
Storage.
Renewables: Biomass Gasifier Design, Development and Testing, Pyrolysis for liquid
fuels and chemical, CNG Kit development, Testing of Solar Collector and systems,
Passive Solar Architecture, Development of Carbon PV cell, Decentralised Power Systems
-Grid Integration Issues, Hybrid Systems for Rural Electrification, Wind Energy, Low
Cost Solar Drier, Fuel Cells, Thin film solar cells,
Carbon nanotubes for hydrogen storage, Solar photovoltaic concentrator, Waste to Energy
Electrochimical energy Storage.
Clean Coal Technologies: Underground Coal Gasification, Chemical Looping, Clean
Combustion, CO2 sequestration
Nuclear: Nuclear Safety, Nuclear Waste management, Thermal Hydraulics, Computer
Simulation Models for Analysis of Transients in Pressurised Heavy Water Reactor.
M.Tech. Degree in any of
the following branches of
Engineering: Aeronautical/
Aerospace, Chemical,
Civil, Electrical,
Mechanical, Metallurgical,
Energy Studies.
M.Sc. in Chemistry/
Physics/ Mathematics with
a good academic record.
29
Code Department Fields of Specialization Minimum Qualification
BMID01 Industrial
Design Centre
Some of the specific areas include:
Design Strategy and Innovation
New Product Development
Collaborative Methodology for Innovation
Human-Computer Interaction
Interaction Design for Indian Needs
Print Media, Illustrations, Multimedia, E-learning,
Story telling in Traditional & Digital Media
Design Management and Design Methods
Collaborative Social & Learning Environments
Way-Finding and Navigation Systems
Typography and Typefaces
Form and Product Aesthetics
Creativity Crafts and Livelihoods
Automobile, Consumer and Furniture Ergonomics
Workstation Ergonomics
Manual Material Handling
People with Special Needs
Design Intervention for Virtual Reality
1) Master’s Degree in
Engineering/Technology or equivalent degree, with
First class or 60% marks
(55% marks for SC/ST) as described later in A.5.4.
2) One of the following: (i) Bachelor’s degree in
Engineering/Technology
with First class or 60% marks (55% marks for
SC/ST/PwD) as described
later in A.5.4. (ii) Master’s degree in
Science or equivalent
degree, with First class or 60% marks (55% marks
for SC/ST/PwD) as
described later in A.5.4. (iii) Master's degree in
Arts/Commerce or
equivalent degree in allied subjects with a minimum
of 55% marks (50% for
SC/ST/PwD), only for admission to the Ph.D.
programmes offered by
the Industrial Design Centre and Department of
Humanities & Social
Sciences.
Candidates must also
fulfill ONE of the
following additional
requirements:
i. Valid GATE/CEED
Score. ii. Junior Research
Fellowship (JRF) of
CSIR/UGC/NBHM/DBT/ICAR/ICMR/ICPR or
DST INSPIRE
Fellowship. iii. Candidates having
UGCNET Lectureship
(LS) are also eligible for Teaching Assistantship in
addition to other academic
qualifications in Humanities & Social
Sciences Department.
iv. Minimum of 2 years of
professional experience
(acquired after obtaining
the qualifying degree and
completed before the
starting of the semester in
which admission is
sought). In addition to
general eligibility
criterion, the applicants
must satisfy the eligibility
criteria specified for the
respective Departments/
Centres/ Schools/
Interdisciplinary Groups.
Further, for financial
support the eligibility
criteria for specific category has to be
satisfied.
30
Code Department Fields of Specialization Minimum Qualification
BMMG01 School of
Management
Accounting
Corporate Competitiveness
Economics
Entrepreneurship
Financial Management
General Management
Human Resource Management
Information Systems
Intellectual Property Rights
International Business
Management of Information Technology
Marketing Management
Operations Management
Organization Behaviour
Project Management
Quality Management
Statistics and Operations Research
Strategy and Business Policy
Technology Management
At least one of the
following criteria must be
met:
i. B.E./ B.Tech or
equivalent degree with
60% marks/ 6.5 CPI
(55% marks/ 6.0 CPI for
SC/ST) and at least two
years of work experience
and qualified in GATE/
UGC-NET (Lectureship)
/UGC-JRF/ CSIR-NET
(Lectureship)/ CSIR-JRF
or having CAT/ GMAT/
GRE score within the last
five years.
ii. Master of
Management/ ME/
M.Tech/ M.Pharma/
M.Phil/ 2 years MBA or
2 year PG Diploma in
Management from any
institute recognized by a
Government body
(AICTE/UGC/AIU) with
60% marks/6.5 CPI (55%
marks/6.0 CPI for
SC/ST).
iii. M.Sc./M.Com./ MA/
LLM/MCA or equivalent
degree with 60% marks/
6.5 CPI (55% marks/ 6.0
CPI for SC/ST) at post
graduation level and
qualified in GATE/UGC-
NET Lectureship (LS)/
UGC-JRF/CSIR-NET
Lectureship (LS)/ CSIR-
JRF or having
CAT/GMAT/GRE score
within the last five years.
iv. CA with 60%
marks/6.5 CPI (55%
marks/6.0 CPI for
SC/ST) in the preceding
degree.
If you are applying to
Shailesh J. Mehta School
of Management, you are
required to submit a
sample of your recently
published writings on a
relevant topic or a
research proposal (1500
words) on a topic of your
research interest in place
of Statement of Purpose.
The proposal should
contain (a) problem
identification, (b) brief
review of literature and
(c) proposed method-
logy.
31
Code Department Fields of Specialization Minimum Qualification
BMSR01
Centre for
Studies in
Resources
Engineering
I) Application Area
a) Water Resources
b) Terrain Evaluation, Land-use planning and monitoring
c) Rural Development and Agro-informatics
d) Minerals Exploration
e) Natural Hazard of Droughts, Desertification,
Landslide, Avalanche, Earthquake, Tsunami etc.
f) Marine Resources and Ecology
g) Snow, Glaciers and Atmosphere
h) Applications of Microwave Remote Sensing
II)Theoretical Areas
i) Digital Image Processing
ii) Digital Photogrammetry and Cartography
iii) Geospatial Technologies
iv) SAR Inter ferometry and Polarimetry
v) Mineral Systems Studies
vi) Global Positioning Systems
vii) Climate Change Studies
1) The actual available Ph.D. topics for a particular round of admissions and
the corresponding preferred engineering/science disciplines for each topic
specified by the concerned faculty members will be posted on CSRE webpage
http://www.csre.iitb.ac.in and applicants may visit the same to identify the
matching topics at the time of submitting the application.
2) The application should include the following in addition to what is already
included in the standard application form:
a) Applicant’s Statement of purpose stating at least one topic from list of
topics offered.
b) Applicant’s Curriculum vitae covering
List of courses taught by the applicant during the last three years relevant to
the research topic of his/her interest
List of M.E./M.Tech. projects supervised by the applicant during the last
three years relevant to the topic of his/her interest
List of training programmes attended by the applicant in the last three years
relevant to the topic of his/her interest
List of publications of the applicant in peer refereed journals / refereed
conferences relevant to his/her topic of interest.
Any awards / recognition won by the applicant for work in areas relevant to
his/her topic of research
Title of applicant’s M.Tech./ME dissertation topic or B.Tech./BE/M.Sc.
Final year project topic and abstract
Applicants with M.Sc. must have studied Mathematics at least till 10+2 level;
Mathematics during B.Sc. desirable.
Candidates M.Tech/ ME
or B.Tech/ B.E. or M.Sc.
First Class or 60% marks
(55% for SC/ST) in any
of the following branches:
Agricultural
Engineering
Civil Engineering
Computer Science and
Engineering
Electronics &
Communication
Engineering
Electrical Engineering
Geology & Geophysics
Information Technology
Mathematics
Mining Engineering
Physics
Environmental
Engineering
Architecture and Town
Planning
Geoinformatics
Geomatics (GI)
32
3. Indian Institute of Technology Delhi, New Delhi 110 016 – DL
In all cases, the minimum eligibility is Master’s degree in Engineering/Technology or Master’s degree in Science/Humanities with a minimum of 60% (6.00
CGPA) marks in aggregate (of all the year / semesters of the qualifying examination) or equivalent grade point average (as determined by IIT Delhi). For
SC/ST/PH category candidates, the minimum performance in the qualifying degree is relaxed from 60% to 55% (from 6.00 to 5.5 CGPA).
Code Department Fields of Specialization Minimum Qualification
DLAM01 Applied
Mechanics
(a) Design Engineering: Design Engineering, Design Method and
Engineering alternatives, Reliability Engineering, Computer Aided Design,
Ergonomics, Reverse Engineering, Design and Analysis of Biomedical Devices, Complaint Mechanisms and Smart Instrumentation, Bio-inspired
Engineering.
(b) Fluid Mechanics: Bio-fluid mechanics, Computational Aerodynamics,
CFD- Computational Fluid Dynamics (includes DNS-Direct Numerical Simulation, LES-Large Eddy Simulation, DES-Detached Eddy Simulation,
RANS-Reynolds Averaged Navier 0-Stokesetc.), Internal Flows,
Hydrodynamic stability theory, Low-dimensional models and chaos, Micro-air Vehicles. Optical flow diagnostics (PIV-Particle Image Velocimetry and
Micro PIV), Pipeline Engineering, Pollution Dispersion, Supersonicand
Hypersonic Flows, Turbulence, Turbulent boundary-layer stability and control, Two phase flows, Aerodynamics; Turbulent heat transfer
compressible flows, Fluid-structure interaction.
(c) Solid Mechanics: Large deformations, Impact mechanics, Elasticity,
Piezothermoelasticity, Composite materials and structures plates and shells, Non-linear dynamics and chaos, Railway vehicle dynamics, Off-shore
structures, Smart structures, Structural stability, Snow mechanics, Dynamic
plasticity, Nano composites, Damage mechanics, Soft Materials, Structural health monitoring, Functionally graded structures, Multi-Scale modeling of
nano-structures, Bio-mechanics/ cell mechanics, Cardiovascular
biomechanics, Brain biomechanics, Computational surgery.
Master’s degree in Mechanical, Civil, Chemical, Aeronautical,
Naval Architecture, Applied
Mechanics, Engineering Mechanics, Engineering Analysis
& Design or Design Engineering.
DLAS01
Centre for
Atmospheric
Sciences
Numerical Modeling of the Atmosphere; General circulation; Tropical Meteorology and Indian Monsoon; Land-Surface Process Modeling; Land-
Atmosphere Interaction; Ocean Modeling; Coastal Processes; Ocean State
Simulations and Forecasting; Storm Surges and inundation; Climate
Dynamics; Climate Variability and Changes; Climate Change Detection &
Attribution; Global and Regional Climate Modeling; Climate Projections;
Climate Change Impacts; Urban Climate; Chemical Transport Modelling and Air Quality Prediction, Air Pollution and Health; Aerosol-Climate
Interactions; Heat Island Effect: Modelling and Measurements; Fog
Prediction; Numerical Methods; Renewable Energy Meteorology; Resource Assessment.
M.Tech/M.Sc. /B.Tech (with valid GATE Score) degree in Mechanical,
Civil, Chemical & Computer
Science & Engineering, Physics,
Chemistry, Mathematics,Statistics,
Oceanography, Environmental
Science, Engineering Physics, Atmospheric Science, Meteorology
and related fields. For B.Tech. or
equivalent the minimum eligibility is 70% marksor7.5CGPA.
DLAL01
Centre for
Applied Research in
Electronics
(a) Biosensors, Microelectronics and MEMS.
(b) Microwave Circuits, Antennas, RF MEMS, MMICS, Device Modeling. (c) Signal processing and underwater acoustics, air acoustics, Speech and
Audio Signal Processing, Communications, Multi-Sensor fusion.
Master’s degree with the Preceding degree in appropriate area with first
class throughout.
Master’s degree in Electrical, Electronics, or Communication
Engineering or equivalent, with
minimum marks: GEN: 75%, OBC: 70%, SC/ST/PH: 65%.
DLBM01 Centre for
Biomedical Engineering
Biomaterials, Biomechanics, Medical Imaging, and Bioinstrumentation.
Master’s degree in any branch of
Engineering/ Science/ Pharmacy/ Mathematics/ M.B.B.S. with 60%
MD/MS with first class and B.Tech
or equivalent having above 70% are also eligible to apply for Ph.D.
33
Code Department Fields of Specialization Minimum Qualification
DLBC01 Biochemical
Engineering & Biotechnology
Bioprocess Engineering: Engineering analysis of enzymatic, cellular,
metabolic processing involving bioprocess kinetics, Modeling for development of reactor operation strategies & process optimization, Use of
Innovative bioreactor designs, Process integration & scale-up for economic
production of metabolites, Monitoring and control of process parameters, Animal cell technology, Plant cell/hairy root cultivation in bioreactors for
strategic metabolite production, Metabolic flux analysis, Bioenergetics,
Biotransformation.
Downstream Processing: Novel product separation strategies based on
sorption, Liquid-liquid extraction, Ultra-filtration, Affinity methods.
Molecular Biology and Recombinant DNA Technology: Development of
recombinant cultures for hyperproduction of metabolites and commercially important enzymes (β glycosidase, laccase, protease) Protein engineering,
Heterologous protein production (including therapeutics in Escherichia coli,
Pichia pastoris), Cancer molecular biology, micro RNA research and RNA technology, Bioinformatics and Genomics.
Bioremediation and Environmental Biotechnology: Prospecting of
microbes & their application in wastewater treatment and agriculture.
Parmaceutical Biotechnology and Industrial Biotechnology.
Bionanotechnology: Lab-on-a-chip devices, drug delivery and diagnostics devices.
M.Tech./ M.S. degree in Chemical/ Biochemical Engineering, Bio-
technology, Food Technology,
Environmental Bio-technology, Pharmaceutical Bio-technology,
Industrial Bio-technology, Applied Microbiology.
DLEN01 Centre for
Energy Studies
Electric Power Systems, Energy Planning, Fuel Technology, Fuel Cells, Biomass Utilization, Utilization of alternative fuels in IC engines, Solar
Thermal Utilization Photovoltaic, Plasma Science & Technology, Energy
Conservation, Energy and Environment Management.
Master’s degree in Mechanical, Civil, Chemical, Electrical (Power
Systems/ Power Electronics)
Energy, Environment, Agriculture, Physics, Chemistry, Automobile
Engineering, Computer Science &
Engineering.
DLMG01 Management
Studies
General Management, Economic Development, Indian Financial System, International Business, Competitiveness, Corporate Planning, Corporate
Governance, Organization Management and Development, Organizational
Behavior, Human Resources Management, Organizational Culture, Leadership and Business Ethics, Financial Management, Corporate Finance,
Portfolio Management, Security Analysis, Management of Investment, International Finance, Production and Operations Management, Optimization
Techniques, Facility Layout/ Location Problems, Manufacturing Systems,
Project Management, Risk Management, Infrastructure Projects, Mergers and Acquisitions, Productivity and Efficiency Analysis, Marketing Management,
Sales Management, Strategic Marketing Management, IPR Management,
Information Systems & Technology, E- Business, E-Governance, Telecom Systems Management, International Telecom Management, Flexible Systems
Management, Management of Change, Entrepreneurship Management &
Development, Creativity and Innovation Management, R&D Management, Managerial Ethics, Environment Management, Management of Technology,
Management of education and academic leadership, Logistics & Supply Chain
Management, Social Media & Business Practices, Social Media Analytics, Cyber Security, Business analytics.
Master’s degree in any branch of Engineering/ Technology or Master’s
degree in Science, Commerce,
Economics, Social Science with MBA, or Graduate in any branch of
Engineering/ Technology with MBA
or equivalent with CGPA 6.75 on a 10 point scale or 60% in aggregate for
general category.
DLMS01 Materilas Science &
Engineering
Structure property correlations in materilas; Micro and Nano-scale mechanical behavior of materials; Auxetic materials (Negative Poisson’s ratio); Failure analysis; Fracture mechanics; Phase transformations; Transformation plasticity; Porous materials; Shape memory alloys; Amorphous materials; Severe plastic deformation; Electron microscopy; Materials characterization; Processing, characterization of light weight metals and metal matrix composites; 3D printing; High-entropy alloys; Nano-scale friction and wear behavior of materials; In situ microscopic study of mechanical and tribological behavior.
Polymers Synthesis and modification Rheology and Processing of Polymers; Polymer Blends and Alloys; Fibre/ Particulate Filled Thermoplastic/ Thermoset Composites; Block Copolymers; Mechanical Thermal and Morphological properties of polymer; Photodegradable Polymers; Polymer nanocomposites; Smart and High performance polymeric materials; Synthesis of conjugated organic materials; Olefin Polymerisation Catalysts; Deformation and fracture of polymers and composites; Biodegradable Polymeric materials for drug delivery and packaging application applications; Surface Engineering using controlled radical Polymerization, Polymer based Biomaterials; Functional materials and membranes for water, energy and electrochemical process.
M.Tech in Polymer Science & Engineering or Plastic & Rubber Technology or Chemical Engineering, Chemical Technology or Fiber Science & Technology or Materials Engineering, Meta-llurgical Engineering, Ceramic Engineering, Mechanical Engineering, or M.Sc. in Chemistry, Physics, or Materials Science.
34
Code Department Fields of Specialization Minimum Qualification
DLRD01
Rural
Development & Technology
Artisanal technologies and rural industries, Biogas Production and
enrichment and animal power, Renewable energy technologies, Rural energy
systems, Biomass and Environment, Microbial Biotechnology, Ecological Sanitation. Bioremediation, Waste Management, Biofertilizers and
Biopesticides, Tissue culture, Mushroom technology, Algal Biofuels, Food Quality & Safety, Rapid Composting, Waste water treatment and Bioenergy
generation, Food processing engineering, Food Science & Technology, Dairy
and Food Engineering, Rural Development Planning.
Master’s degree in any discipline of Engineering/ Technology or Science.
DLCH01 Chemical
Engineering
Hydrogen and fuel cell technology, Unconventional energy resources, Solid
oxide fuel cells, Bio-renewable chemicals and bio-fuels, Catalytic
Hydrocarbon conversion processes, Green industrial processes, Heterogeneous catalysis and Reaction kinetics, Chemical reaction
engineering, Interfacial science and engineering, Electrochemical
engineering, Chemical Product design, Mass transfer, Thermodynamics, Membrane synthesis and separation, Electrochemical systems synthesis and
separation, Composites and materials, nanotechnology, Multiphase reactor
engineering, Process intensification, Multiphase flows, Computational fluid
dynamics, Numerical methods, Molecular simulations, Transport
phenomena, transport at Nanoscale, Structure-property Solvophobic
Interactions and Self-Assembly, Instabilities, Adhesion, Debonding, Dewetting and Pattern Formation of Soft Thin Films, Self-organizations, of
complex fluids, Granular materials, Process systems engineering Process
operations, Planning and scheduling of batch and continuous processes, Modeling and optimization, Evolutionary computation, Meta-heuristic
algorithms, Hydrodunamic stability, Theoretical/computational polymer
physics, dynamics of complex fluids, Polymer processing, Colloidal interactions and Nanoscale engineering, Molecular Self-assembly
Microfluidics, Nanolithography, Polymer Physics, Biopolymers under flow,
Polymer Nano-composites, Flow through porous media, Reservoir simulation, Enhanced oil recovery, Automotive catalysis, Air pollution
control, Water treatment, Environmental engineering, pollution-prevention
technologies, Bio-similars, Bio-processing, Quality by Design (QbD), Process Analytical Technology(PAT), Multi-variate Data Analysis (MVDA).
Master’s degree in Chemical Engineering.
DLCY01 Chemistry Physical Chemistry, Organic Chemistry, Inorganic Chemistry, Analytical
Chemistry, Bio-chemistry, Theoretical Chemistry, Materials Chemistry.
Master’s degree in Chemistry with at least 60% marks or CGPA of 6.00 on a ten point scale.
DLCE01
Civil Engineering
(code number of the
specialization to be indicated
in the data sheet)
Construction Engineering and Management
Master’s degree in Civil Engineering or MBEM, SPA or equivalent or relevant Master's degree in Engineering.
DLCE02 Engineering Geology Master’s degree in Civil Engineering or in Applied Geology or relevant Master's degree in Engineering.
DLCE03 Environmental Engineering
Master’s degree in Civil or in Environmental Engg. or Chemical Engineering or Biochemical & Biotechnology or relevant Master's degree in Engineering.
DLCE04 Offshore Structures
Master’s degree in Civil Engineering or relevant Master's degree in Engineering.
DLCE05 Rock Engineering Master’s degree in Civil or Mining Engg. or in Applied Geology or relevant Master's degree in Engg.
DLCE06 Geotechnical and Geoenvironmental Engineering Master’s degree in Civil Engineering or relevant Master's degree in Engineering. DLCE07 Structural Engineering
DLCE08 Remote sensing
Master’s degree in Civil, Agricultural, or Mining
Engineering or relevant Master's
degree in Engineering.
DLCE09 Transportation Engineering
Master’s degree in Civil Transportation Engineering/ Transport Planning/ Urban Planning/ Mechanical Engineering/ Chemical Engineering/ Computer Engineering or relevant Master's degree in Engineering.
DLCE10 Water Resources Engineering Master’s degree in Civil Engineering or relevant Master's degree in Engineering.
35
Code Department Fields of Specialization Minimum Qualification
DLCS01
Computer
Science and Engineering
Computer Architecture, Design Automation and VLSI, HW-SW Co-Design, Embedded Systems Design, Parallel Processing, Image Processing, Artificial Intelligence, Location Based Services, Computer Vision, Computer Graphics and Animation, Semantics of Programmeming Languages Machine Learning, Databases, Information Retrieval, Data Mining Social Network Analysis, Computer Networks, Wireless Networks, Systems and Network Security, Design and Analysis of Algorithms, Optimization, Computational Geometry, Computational and Systems Biology, Computational Logic, Operating Systems, IT for Development, Mobile Computation, Verification, Concurrency, Complier Design, Virtualization and Cloud Computing.
Master’s degree in Computer Science, Electronics Engineering, Mathematics or Physics with formal background in Computer Science or MCA Excellent academic record i.e. ≥ 80% or 8.0 CGPA in qualifying degree
DLEE01 Electrical
Engineering
Computer Architecture, Parallel Processing, Multimedia, Embedded/ Cyber Physical Systems Medical and Public Health Informatics, Computational Linguistics, Systems Biology, Cognitive Science, Computer and Communication Networks, Communications, Signal Processing, Image Processing, Computer Vision, Pattern Recognition, Machine Learning, Bio-metrics, Bio-informatics Optical Communications, Control Systems, Bio-molecular Circuits and Systems, Intelligent Control, Nonlinear Control, Robotics, Systems Theory, VLSI, Biological Neural Networks Analog and RF integrated circuits, Device, Physics and photonics, Electrical Machines and Drives, Power Electronics, Power Systems, Power Quality Generation, Distributed generation & Power generation from renewable sources.
Master’s degree in an appropriate discipline with excellent academic record.
DLHS01 Humanities and Social
Sciences
Psychology
Positive Psychology, Social Psychology, Intergroup relations, Social identity, Group based emotions, Intergroup contact and social change, Stigma and wellbeing, Leadership, Cognition, Emotion, Judgement and Decision Making.
Sociology
Agrarian Studies, Anthropology of the State, Dalit and Tribal Studies, Development Studies, Environmental Sociology, Globalization, Migration, New Media Studies, Political Sociology/Anthropology, Sociology of Culture, Sociology of Food and Nutrition, Sociology of Movements, Sociology of Religion, Sociological Theory, Urban Sociology
Philosophy
Moral, Political, and Legal philosophy, Metaphysics of the Self, Philosophy of Mind, Philosophical Aesthetics, Philosophy of Mind and Cognition, Philosophy of Culture and History, Contemporary Thought and Intellectual History, Deep Ecology, Buddhism/and Politics, Exile and Travel, Religion and Politics, Peace Studies, Tibetan Literature and Politics, Ethnicities and Margins, Children and Literature.
Literature
Culture Studies, Gender Studies, Performance and Theatre Studies, Digital
Humanities, Modernist and Postmodernist Literature, Indian English Theatre,
Indian Writing in English, Contemporary Fiction, Postcolonial Literature, Philosophy of Literature
Linguistics
Phonology, Language Education, Language Variation, Formal Syntax and semantics, Language Acquisition, Cognitive Studies, Computational Linguistics, Psycholinguistics, Neurolinguistics.
Economics
Microeconomics theory, Game theory, Mechanism design, Decesion theory, Structural changes and aggregate productivity, Endogenous growth, Public good provision and income inequality, Development Economics, Issues in India’s economics development, Issues in India’s Macroeconomy.
M.A. with 1st Class in the relevant subject for English it is 55%.
DLID01 Design
Industrial Design, Product Design, Engineering Design, Design Creativity, Analogical Design, Universal and Inclusive Design for UX/UI, Human Computer Interaction, Computer Aided Design and Manufacturing, Design for Product Life-Cycle.
Master’s Degree in Design/ Architecture/ Engineering.
DLTX01 Textile
Technology
Mechanical Processing of Textiles, Textile Chemical Processing, Fiber Science and Technology, Technical Textiles, Textile Machine Design, Apparel Engineering and Garment Technology
M.Tech or Equivalent degree in Textile Technology, Textile
Chemistry, Fiber Science and
Technology, Textile Engg., Chemical
or Mechanical Engg, Civil/ Electrical/
Electronics/ Bio-tech/ Nano Techno-logy, Polymer Science and Techno-
logy, Plastic and Rubber Technology,
M.Sc. in Physics and Chemistry.
36
Code Department Fields of Specialization Minimum Qualification
DLMA01 Mathematis Pure Mathematics, Applied Mathematics, Statistics, Operational Research, Theoretical Computer Science
Master’s Degree in Mathematics, Statistics, or Operational Research or Computer Science, MCA, B.Tech in Computer Science.
For B.Tech degree the minimum eligibility is 70% marks or 7.5 CGPA in 10 point scale. For B.Sc and M.Sc degrees, the minimum eligibility is 60% or 6.75 CGPA in 10 point scale in both the degrees.
DLME01 Mechanical
Engineering
Design, Production, Thermal Engineering
Master’s Degree in Mechanical
Engineering/ relevant Engineering discipline to be approved by the
department
Industrial Engineering
Master’s Degree in any Engineering discipline/ any
relevant non- engineering discipline
e.g. MBA, MCA etc., as approved by the department
DLTR01
Industrial Tribology
Machine
Dynamics & Maintenance
Engineering
Tribology: Tribology of Polymers & composites, nano-composites, ceramics and metals. Wear Mechanisms and modeling of metallic and non- metallic materials and surface engineering. Boundary and Hydrodynamic lubrication, E-HD lubrication, lubricant characterization and analysis, tribology of bearings and other machine elements. Pneumatics, conveying of bulk solids, operational problems like erosion and degradation.
Maintenance Engineering and Machine Dynamics: Condition based maintenance, signature analysis, vibration, acoustic emission, temperature and
wear debris monitoring techniques, maintenance planning and control,
computer aided maintenance audit, reliability, availability and maintainability (RAM) engineering, vibration & noise analysis and control, risk analysis and
safety, non-destructive testing, residual life estimation, failure analysis,
performance and dynamic study of machine elements and equipment like pumps, compressors, turbines, design for maintenance, etc.turbines, etc,
Design for maintenance etc.
Master’s Degree in Engineering (Mechanical, Chemical, Industrial).
DLPH01 Physics
Materials and Condensed Matter Physics:Thin Films, Materials and Devices, Novel Functional Magnetic Materials, Nanomaterials, Lattice
Dynamics, Semiconductors and Amorphous Materials, Electronics Ceramics,
Microwave, Absorbing Materials, Microwave Processing, Quantum Functional Materials, Superconductivity, Nanomagnetism and Spintronics,
Spin Dynamics, Charge Carrier Dynamics and Electronic Structure Studies of
the Correlated Electron Systems, e.g., Fe-based high-Te superconductors, Complex oxides, Materials for Nuclear Energy.
Optics and Photonics: Holography, High Density Data storage, Liquid
crystals, Nonlinear Phase Conjugation, Optical Information Processing,
Optical Data Security, Singular Optics, Nonlinear Optics, Nonlinear guided Wave Optics, Solutions, Quantum Optics, Fiber Optics, Integrated Optics,
Fiber Optics Sensors and Biosensors, Fiber optics Components,
Nanophotonics, Laser Spectroscopy and Applications, Terahertz Spectroscopy and Applications, Ultrafast Dynamics, Laser Processing and Fabrication,
Green and Biophotonics, Photonic Metamaterials, Bio-Medical Imaging,
Inverse Problems in Imaging, Optoelectronics, Ultrafast Optics.
Plasma Physics: Particle Acceleration, Nonlinear Waves and Instabilities in
Plasma, Thermo Nuclear Fusion, Microwaves and Plasma Interaction,
Solitons in Plasma, Space Plasmas, Terahertz (THz) Radiation Generation, Hall Thrusters, Interaction of Plasmas with Materials.
Theoretical Physics: Mathematical, Statistical Mechanics, and
Computational Physics, theoretical Studies in ultra-cold atoms, Cavity Opto-
mechanics with ultra-cold atoms, Nuclear Physics, Particle Physics, Soft Condensed Matter and Biophysics.
Computational Materials Science: Designing Energy Materials, Thermal
Transport, Electronic Structure, Band Engineering, Clusters and Catalysis,
Pyroelectricity, Piezoelectricity, (Anti)ferroelectricity, (Anti)ferromagnetism, Multiferroics, Spin and Lattice Dynamics, Caloric Effects, Non-collinear
Magnetism, Genetic Algorithm,Machine Learning, Force Field, Density
Functional Theory, Kinetic Monte Carlo, Molecular Dynamics, etc.
Interdisciplinary: Optical Spectroscopy under extreme conditions, High
Pressure-High Temperature Physics, Energy Storage and alternative Energy
Materials, CO2 sequestration, Mineral Physics.
M.Sc. in Physics/ B.Tech. in
Engineering Physics/ M.Tech. in Applied Optics/ Solid State Materials/ Opto-electronics/
Photonics.
37
4. Indian Institute of Technology Guwahati, Guwahati 781 039 – GW
Relaxation of SC/ST/PD candidates: Eligibility criteria will be relaxed by 5% in percent marks or 0.5 point in CPI in all cases.
Code Department Fields of Specialization Minimum Qualification
GWBT01
Bio-sciences & Bio-
engineering All areas of Bio-sciences and Bio-engineering.
M.Tech. degree or equivalent in an appropriate area with minimum CPI of 6.5 or 60% marks or MSc Degree in Biotechnology/ Life Science/ Agricultural Sciences/ Related Disciplines with minimum CPI 7.5/10 or 70% marks.
GWCH01 Chemical
Engineering All areas of Chemical Engineering.
M.Tech. degree or equivalent in an appropriate area with minimum CPI of 6.5 or 60% marks.
GWCY01 Chemistry Inorganic Chemistry, Organic Chemistry Physical Chemistry & Theoretical Chemistry.
Masters degree in the relevant discipline with minimum of CPI
6.5/10 of 60% marks.
GWCE01 Civil
Engineering
Construction Management, Construction Materials, Infrastructure Engineering and Management, Environmental engineering, Geotechnical
Engineering, Structural Engineering, Transportation Systems Engineering,
Water Resources Engineering and Management, Earth Science, Remote Sensing and Geology.
M.Tech. degree or equivalent in an appropriate area with minimum CPI of 6.5 or 60% marks.
GWCS01 Computer Science &
Engineering
Algorithms; Computational Geometry; Systems Biology (Bio-computing); Bio-inspired Robotics and related algorithms; Mobile Agent Based Systems;
Machine Learning; Speech Processing; Image Processing, Information
Retrieval and Web Mining; Formal Verification; Embedded Systems, CAD for VLSI; Multi-processor Computer Architecture; Computer Security;
Networks; Operating Systems; Distributed Systems; and Human-Computer
Interactions.
M.Tech. degree or equivalent in an appropriate area with minimum CPI of 6.5 or 60% marks.
GWDE01 Design
Industrial Design, Product Design, Communication Design (Including art & visual Culture) Interaction and Usability engineering (Including HCL), Design Management , Ergonomics (Including Occupational health and
safety), Environment Design, Animation.
M.Des/ M.Arch or M.Tech/ ME degree in relevant area with a
minimum CPI 6.5/10 or 60%
marks. Master’s degree in Applied Arts/ Ergonomics/ Fine Arts/
Psychology/ Physiology with
minimum CPI 6.5/10 or 55% may also be considered.
GWEE01 Electrical & Electronics Engineering
All areas of Electrical, Electronics and Communication Engineering
M.Tech. degree or equivalent in an
appropriate area with minimum CPI of 6.5/10 or 60%marks.
GWEN01 Energy
Screening and Genetic improvement of Bio-fuel crops, Glycerol,
bioconversion and synthesis of alcoholic biofuels, Biodiesel from microalgae, oilseeds, Bioelectronics for bio-fuel cell, Bigas, Combustion
and detonation, Energy efficiency in electric machine, Wind energy, Waste
heat recovery, Biohydrogen, bioethanol, biobutanol and microbial fuel cell, Thermal energy storage and hydrogen storage, solar driven cooling system,
porous medium combustion and hydrogen energy, Solar cells.
M.Tech. degree or equivalent in an appropriate area with minimum CPI
of 6.5/10 or 60% marks, OR M.Sc. in Physics, Chemistry, Bio-technology, Environmental Science
or in relevant field with minimum of CPI 6.5/10 of 60% marks.
GWEV01 Centre for
Environment
Environmental Chemistry/Biotechnology/Economics/Engineering; Waste
Water Treatment and Supply, CO2 Capture/storage; Atmospheric
Chemistry; Air Quality monitoring; Environmental Hydraulics;
Environmental Genomics; and Other emerging areas of environment with
interdisciplinary application of science, technology, arts and humanities.
M.Tech. degree or equivalent in an
appropriate area with minimum CPI of 6.5/10 or 60% marks, OR, M.Sc. in Physics, Chemistry Bio-
technology, Environmental Science or in relevant field with minimum CPI of 6.5/10 or 60% marks.
GWHS01 Humanities and Social Sciences
All areas of Humanities and Social Science Masters Degree in the relevant discipline with a minimum of 55% marks or equivalent.
GWMA01 Mathematics All areas of Mathematics, Statistics and Theoretical Computer Science Masters degree in the relevant discipline with a first class or a minimum CPI 6.5/10 or 60% marks.
38
Code Department Fields of Specialization Minimum Qualification
GWME01 Mechanical Engineering
Stress Analysis; Experimental and Computational Fracture Mechanics;
Composite Materials and Structures; Smart Materials and Smart Structures;
Materials Characterization; Dynamics and Controls; Electro-Mechanical Systems; Robotics; Nonlinear Vibration; Bio-Mechanics; Noise; Tribology;
Condition Monitoring; Experimental Fluid Dynamics; Computational Fluid
Dynamics (CFD); Bio-MEMS and Micro Fluidics, Heat Transfer; Low Speed and High Speed Acrodynamics; Multiphase Flow; Hydrogen Energy;
Metal Hydride Based TGhermal Machines; Energy Storage and
Fluidization; Bio-fuels; Metal Cutting; Micro Machining and Micro Fabrication; Unconventional Machining; Mechatronics; CAD/CAM/CAE;
Materials Processing and Heat Treatment; Metal Forming; Welding; Bio-
Nano Composites and Nanofluids.
M.Tech. degree or equivalent in an appropriate area with minimum CPI of 6.5 or 60% marks.
GWPH01 Physics
Condensed Matter Physics – biomaterials, cold atoms and quantum
computation, computational materials physics, ferroelectric materials, organic
semiconductors, semiconducting materials, smart magnetic materials, soft condensed matter physics, spintronics, statistical physics, strongly correlated
systems, superconductivity topological insulators. Nanomaterials and
nanotechnology.
Laser and Photonics – Applied Optics, Fiber Optics, Laser Matter
Interaction, Nonlinear Optics, Quantum Optics.
High Energy Physics – Collider Phenomenology, beyond the standard
model and cosmological connections, B-Physics, CP violation, Neutrino
physics.
Astrophysics – Astrophysical flows, ultra high energy cosmic rays.
Master’s degree in the relevant
discipline with a first class or a
minimum CPI 6.5/10 or 60% marks.
39
5. Indian Institute of Technology Kanpur, Kanpur 208 016 – KN
The basic qualification for admission to the Ph.D programme is Master’s degree in Engineering, Science, Humanities and Social Sciences respectively or allied
area(s). However, the applicants with Bachelor’s degree in Engineering may also be considered for admission based on their performance and attainments.
Code Department Fields of Specialization Minimum Qualification
KNAE01 Aerospace
Engineering
Aerodynamics: Experimental Aerodynamics, High Speed Jets, Acoustics, Unsteady Aerodynamics * Flapping Wing, Transition & Turbulence, Hypersonic Aerodynamics, Microfludics, CFD/High performance Computing, Flow Control, Wind Energy & Design, Fluid Structure Interactions.
Flight Mechanics and Control: Design & Control, Missile Guidance
& Control, Flight Testing, Instrumentation & Parameter Estimation, Unmanned & Autonomous Air Vehicle, Space Dynamics.
Propulsion: Experimental & Computational Combustion, Emissions, Liquid Atomization, Turbomachinery, Intake Aerodynamics, Thrust
Vectoring, Electric Propulsion. Fundamentals of Combustion, Applied
Compressible Flows, Aircraft propulsion.
Structures, Structural Dynamics & Aeroelasticity: Material
Characterization, Composite Materials and Smart Structures, Structural Dynamics and Stochastic Modeling, Aeroelasticity, Helicopter Theory
(Dynamics & Aerodynamics), Structural Design & Optimization,
Damage Modeling, Design and Dynamics of Autonomous Micro and Mini Air Vehicles, Wind Turbines.
Master’s degree in: (1) Engineering (Aeronautical, Aerospace, Mechanical, Civil, Chemical, Naval Architecture Electronics). OR (2) Science with a minimum of 3 years of relevant R&D experience in Aerospace Engineering
KNCH01 Chemical
Engineering
Transport phenomena, Chemical Reaction Engineering, Applied Kinetics and Catalysis, Thermodynamics, Membrane Separation Processes, Process Systems Development, Computer Aided Design, Optimization and Control, Petroleum Engineering, Polymer Science & Engineering, Environmental Pollution & Control, Adsorption, Safety and Reliability, Dynamics of Nonlinear Systems, Colloids and Interface Engineering, CFD, Rheology, Non-Newtonian Fluid Mechanics, Nanotechnology, Numerical Methods for Engineers, Mathematical Methods in Chemical Engineering, Modeling and Simulation in Chemical Engg., Bioinformatics, Modeling and Simulation of Separation Processes. Molecular Simulation.
First class Master’s degree in Chemical Engineering or equivalent.
KNCY01 Chemistry
Inorganic: Bio-inorganic chemistry, Coordination polymers,
Organometallic chemistry, Inorganic materials.
Organic: Supra molecular chemistry, Bio-organic chemistry, Medicinal Chemistry, Organic photochemistry, Organic synthesis and Reaction mechanisms, Organometallic chemistry. Physical: Bio-physical chemistry, Chemical kinetics, Magnetic resonance, Mass spectrometry, Physical photochemistry, Ultrafast spectroscopy. Functional materials.
High second class Master’s degree in Chemistry or Physics; Note: Candidates must have had Bachelor’s degree with Chemistry and preferably Mathematics as one of the subjects.
KNCS01 Computer Science & Engineering
Algorithms: Randomized, Graph Theoretic, Number Theoretic, Data
Streaming algorithms, Algorithmic game theory.
Systems: Computer Architecture, VLSI testing, Software Architecture, Internet Technologies, Distributed and Mobile Computing, Data bases, Programme Analysis, Compilers and optimization, Cyber Security, Cyber Physical Systems, Embedded Systems, Robotics, Database Technology.
Theory: Complexity, Information Theoretic Complexity, Algebraic Computation, Computational arithmetic & Geometry, Quantum Computing, Computational Game Theory, Logic for CS, Cryptography. Artificial Intelligence: Machine Learning and Probabilistic Reasoning, NLP, Bioinformatics, Intelligent Tutoring, Game theory and Multi-agent Systems, Computer Vision, Graph database and data mining.
First class Master’s degree in Engineering Must possesses adequate Computer Science background. (Note: Outstanding candidates)
40
Code Department Fields of Specialization Minimum Qualification
KNCE02
Civil Engineering (Code
no. of the specialization to
be indicated in the data sheet)
Environmental Engineering.
M.Tech./M.E. in Civil/ Environmental/ Chemical / Mechanical/ Metallurgical Engg. Or related engineering branch. Candidates with M.Sc. degree must have mathematics as one of the subjects at the 10+2 level.
KNCE03 Geoinformatics
M.Tech./M.E. d eg r ee in Civil/ Mining/ Electrical/ Computer Science Engg./ Electronics Engineering./ Information Technology or M.Tech/ MSc. Degree in Earth Science streams/ Geography /Physics/ Mathematics/ Environmental Sciences. Candidates with MSc. degree must have mathematics as one of the subject at the B. Sc. level.
KNCE04 Geotechnical Engineering M.Tech / M.E. degree in Civil
Engineering.
KNCE05 Hydraulics & Water Resources Engineering M.Tech / M.E. degree in Civil/ Aerospace/ Agricultural Engineering.
KNCE06 Structural Engineering
M. Tech /M. E. degree in Civil Engineering. Candidates with Master’s degree in Architecture, Building Construction and allied subjects may also be considered.
KNCE07 Transportation Engineering M. Tech / M.E. degree in Civil Engineering.
KNCE08 Infrastructure Engineering and Management Masters degree in Civil Engineering.
KNIM01 Industrial and Management Engineering
Services Management, Management of Technology, Innovation and Entrepreneurship, Marketing Management, Manufacturing, Operations and Supply Chain, Quantitative Methods & Decision Making, Organizational Behavior, Human Resource Management, Business Economics, Infrastructure and Public Systems, Corporate Governance, Finance, Risk Management and Insurance, Financial Markets and Models, Enterprise Information and Knowledge Systems, Leadership, Ethics, Strategic Management, Business Policy, Energy Economics, Policy and Regulation etc. Intellectual Property Management, Sustainability, Project Management, Business Process Management, E- Governance, Information Systems, Change Management, Business Analysis. Operations Research; Operations Management and Big- Data.
The applicant must have a master’s degree in management or relevant disciplines in engineering/ technology with marks/CPI not below the specified minimum. Applicants with a Bachelor’s degree in engineering with a minimum of 75 percent marks/ 7.5 CPI, or master’s degree in science/ arts/ commerce, satisfying each of the following criteria may also be considered.
(a) a minimum of 65 percent marks/ 6.5
CPI in the master’s degree, (b) first division in bachelor’s degree, and (c) JRF/95 percentile or higher in GATE
KNPH01 Physics
Atomic and Molecular Physics, Astrophysics , Biological and Statistical Physics , Biological and Statistical Physics, Biophotonics,
Computational Physics, Condensed Matter Physics, Cosmology, Dynamical Systems and Turbulence, Fiber optics, Ion Beams and
Nuclear Physics Techniques, Laser Cooling and Trapping, Light-Matter
Interaction, Nonlinear Optics, Particle Physics, Photonics of Micro and Nano Structured Materials, Plasma Physics and Laser Plasma Interaction,
QCD and Lattice Gauge Theories, Quantum Phase Transition, Quantum
Field Theory, String Theory and Quantum Gravity, AdS/CFT, Hydrodynamics, Quantum Optics, Quantum Computing and
Information, with a substantial of Inter-Disciplinary activity.
First class Master’s degree in Physics or first class Master’s degree in a related subject or first class Bachelor’s degree in a related branch of Engineering.
KNEE01
Electrical
Engineering (Codes mentioned
against specializations)
Power Engineering
KNEE02 Including Power Systems, Power Electronics & High Voltage Engg., Control & Automation
KNEE03 Information Systems Master’s Degree in Electrical Electronics or Communication Engg. or equivalent.
KNEE04 Including Communications, Telecom Networking and Signal Processing, RF & Microwaves
KNEE05 Photonics
KNEE06 Microelectronics and VLSI
41
Code Department Fields of Specialization Minimum Qualification
KNHS01 Humanities and
Social Sciences
Economics: Industrial Organization and Policy, Environmental Economics, Environmental Impact Assessment, Development Economics & Policy, Microeconomics, Inter-Industry Economics, Project Evaluation/BCA, Regional Economics, Macroeconomic Theory & Policy, Monetary Economics, Managerial Economics, Transport Economics, Law and Economics, Heath Economics. Econometrics, Applied Econometrics, Game Theory, Political Economics, Mathematica Economics and Optimizational, International Economics. Agricultural Economics & Policy, Behavioral Economics, Financial Economics, International Finance & Commodity Derivatives & Risk Modelling.
English Literature: American Literature, British Literature, Common
wealth Literature, Ethnic Literatures, European Literature, Indian Writing
in English, Literary Movements, Literary Theory, Teaching of Literature, Post Colonial Studies, Indian Literature, Translation Studies, Literature and
the Environment, Posthumanism, Gender Studies.
Linguistics: Linguistic Theory, Cognitive Linguistics, Computational Linguistics, Communication studies, Sociolinguistics, Applied Linguistics and English Language Teaching, First and Second Language acquisition, Linguistic typology, Field Linguistics, Historical Linguistics.
English Language Teaching: Teaching methodology, Curriculum development, Language testing. Fine Arts: Art Appreciation, Art Education, Art-History, Indian Art, Painting, Film and Media Studies
Philosophy: Twentieth Century Philosophy, Logic, Philosophy of Science Ethics, Philosophy of Language, Philosophy of Social Sciences, Indian Philosophy, Philosophy of Mind, Philosophy of Cognitive Sciences, Philosophical Aesthetics, Philosophy of Religion Ethics.
Psychology: Social Cognition, Personality, Experimental Social Psychology, Organizational Behavior, Human Cognitive Processes,
ConsumerPsychology, Cross-cultural Psychology, Health Psychology and Neuropsychology, Cultural Issues in Psychology, Disaster Mental Health, Perception & action, embodied cognition, Psycholinguistics, Attention, Bilingualism & Executive Control, Lateralization of Cognitive Functions.
Sociology: Sociology of Religion, Urban Sociology, Social Demography, Environmental Sociology, Sociology of Development, Science, Technology and Society, Social Movements, Third Sector Non-government and Voluntary development Organization, Human Rights, Social Gerontology, Sociology of Education and Disability Studies. Mobility Studies, Border Studies, New Media Studies.
55% marks in Master’s degree in the respective areawith consistently good academic record.
KNMA01 Mathematics/
Statistics
Coding Theory, Differential and Integral Equations, Partial Differential Equations, Functional analysis, Harmonic Analysis, Fourier Analysis, Operator Theory, Numerical Analysis, Commutative Algebra, Differential and Algebraic Topology, Differential Geometry, Algebraic Geometry, Combinatorics, Logic, Fluid Mechanics, Biomathematics, Parallel Computing, Mathematical Modeling, Order Statistics, Nonlinear Regression, Time Series, Reliability Theory, Variational Analysis, Statistical Inference, Statistical Signal Processing, Order Statistics, Econometrics.
High second class Master’s degree in Mathematics or Statistics, with at least 55% marks or equivalent.
KNMS01
Materials Science
(Interdisciplinary
programme)
Electronic, Magnetic, Opto-electronic, Piezoelectric, Ferro-Electric Organic Semiconductor and Energy Storage/ Conversion Materials. Materials for Flexible Electronics and sensors. Ceramic Processing, Structural Ceramics and Composites. Nanoscale Materials and Processes, Thin Films, Electron Microscopy, Display materials. Materials for microwave application. Superionic/Fast-ion conductors, Solid electrolytes, High Density and Ni-Metal Hydride Batteries. Polymer processing and Rheology, High Performance Plastics, Polymer Blends-alloys & Composites. Optical Spectroscopy (Raman, IR, Photo luminescence), multiferroics.
M.E., M.Tech., M.Sc. (Engineering) Degree in Materials Scienceor any equivalent branch of engineering/ technology; or B.E., B.Tech., B.Sc. (Engineering) with a minimum of 75% marks or Cumulative Point Index (CPI) of 7.5/10 in any relevant branch of Engineering/ technology, or M.Sc. degree in an allied area with , Exceptional academic records.
KNNE01 Nuclear
Engineering & Technology
Reactor Safety, Numerical Methods, Radiation Measurements and Nuclear Instrumentation, Reactor Analysis and Design, Non Invasive
Imaging, NDT, Computed Tomography.
First class Master’s degree in any branch of Engg., preferably with some knowledge in Nuclear Engineering or equivalent
42
Code Department Fields of Specialization Minimum Qualification
KNME01 Mechanical
Engineering
Solid Mechanics: Composite Materials, Fracture Mechanics, Multi scale simulation, Stress Waves, Non-Destructive Testing, Large Deformation Elasto-Plastic Analysis, Impact Contact Problems, Smart Structures-Materials and System, Micro electro- Mechanical Systems. Computer Aided Design, Kinematics and Dynamics of Machinery, Vibration, Friction and Wear, Lubrication, Rapid Prototyping, Rapid Tooling, Reverse Engineering, Compliant Mechanisms, granular media, crystal physics, noise & acoustics, Non Linear dynamics & Control. Fluid Mechanics: Flow control, Turbulence, Wake Dynamics, Experimental Techniques, Computational Fluid Dynamics, Computerized Tomography, Transport in Hierarchical Porous Media, Hydrodynamic Instability, Micro Fluidics, Wave Mechanics. Thermal Sciences: Computational Heat Transfer, Heat Pipes, drop-wise Condensation ,Gas Turbine Blade Cooling ,Heat Exchangers, Turbo machinery, Emission from IC Engines, Biofuels, Hydrogen Technology and Fuel Cells. Flames, Spray Combustion, Portable Energy Storage, Energy Storage Material, Micro Scale Heat Transfer. Manufacturing Sciences: Metal Cutting, Metal Forming, Machine Tools, Unconventional Machining, Computer Aided Manufacturing, Computer Integrated Manufacturing System, Net shape Manufacturing. Casting and Solidification, Nanotechnology, Bio mems.
Robotics and Automation: Manipulator Kinematics and Dynamics, Motion and Path Planning, Collision Avoidance and Navigation, Sensor
Based Intelligent Robotics, Industrial Robotics, Intelligent Control
System, Human Machine Interface, Flexible Manipulators, Compliant Mechanisms.
First class or equivalent Master’s Degree in Mechanical Engineering. Note: Candidates with first class Degree in Production Engg. are eligible for admission only to Manufacturing Science.
Note: In exceptional cases applicants
with first class Master’s degree in other
branches of Engg. May also be considered.
KNMT01 Materials Science
and Engineering
Heat and Mass Transfer in Metallurgical System, Process Design and
Development in Extractive Metallurgy, Optimization, Electro-deposition,
Physical Metallurgy, Alloy Development Thermodynamics and Kinetics of Phase Transformations, Heat Treatment, Solidification, Mechanical
Processing, Steel Making, Processing and Advanced Structural Steel,
Processing-Structure-Property Relations, Nanostructural Materials, Microstructural Characterization and Stereology, Textures in materials,
Environmental Degradation of Materials, Corrosion, Powder Metallurgy,
Structural Ceramics and Composite, Tribology, Welding, Magnetic Materials, Electromagnetic Materials, Thin Film Technology, Opto-
Electronic Materials and Devices, Ferroelectric Ceramics, Electronic
Materials, Organic semiconductor, Display Materials and Technologies, Bio-materials. Multiferroic Materials & Thin films, Clean energy,
Photovoltaic and energy materials & devices.
B.E./ B.Tech. degree and a M.E./ M.Tech degree in Metallurgical or
Materials Engineering, Materials
Science, Ceramic Engineering, Nano-
science, Nano-technology, Mechanical,
Electronics.
Minimum 60% marks or a CPI of 6.0/10
in B.E./ B/ Tech. & Minimum 70%
marks or a CPI of 7.0/10 in M.E./M.Tech.
OR
M.Sc. and M.E./M.Tech. Degree in
Metallurgical or Materials Engineering,
Materials Science, Ceramic Engineering, Nano-science, Nano-technology,
Mechanical, Electronics.
Minimum 60% marks or a CPI of 6.0/10
in B.Sc. and M. Sc.& Minimum 70%
marks or a CPI of 7.0/10 in M.E./M.Tech.
KNLS01 Photonics Science & Engineering
Laser spectroscopy, Bio-medical applications of lasers, Femto second
Pulse Shaping, Nonlinear Spectroscopy, Coherent Control, Multiphoton
Imaging, Quantum Computing, Quantum Optics, Imaging in Complex Media & Biological Tissues, Interferometric Tomography, Laser &
Rainbow Schliern, Imaging Growth of Protein Crystals, Quantum
Cryptography, Nonlinear Fibre-Optics, Optical Fiber Communication, Electromagnetics and RF, Opto-Electronics, Semiconductor Device &
Lasers, Mill metric & Microwave Circuits, Nonlinear Optics, Photonic
Band Gap Structures, Laser Ranging, Laser imaging and cross-section, Flash and scanning laser applications, Digital Holography, Particle Image
Velocimetry, Laser Schlieren, Experimental Stress Analysis, Smart
Materials, Development and analysis of reconstruction algorithms for nonlinear tomography, Shape-based tomography, Numerical solutions to
partial differential equations in electromagnetic, Subsurface imaging,
Quantitative Phase Imaging, Optical Metrology, Applied Signal Processing, Fringe Analysis, Biophotonics, Fiber and integrated optics ,
Infrared and terahertz frequency sensors, Long-period gratings, Fiber optic
Bragg gratings, Plasmonics and met materials.
Masters degree in any branch of Engg. or Masters degree in Science with some
exposure to Optics or Photonics.
Engineering degree holders with a
Bachelor degree can also apply if they
have the requisite CPI of 8.0 and have studied in a CFTI.
43
6. Indian Institute of Technology Kharagpur, 721 302 – KH
In all cases the minimum qualification for admission is a Master's degree in Engineering/Technology or its equivalent with minimum 60% marks or
Master’s degree in Sciences, Humanities or Social Sciences with minimum of 55 % marks (or equivalent grade point average).
Code Department Fields of Specialization
KHAE01 Aerospace Engineering
Fluid dynamics and Aerodynamics, Computational fluid dynamics, Experimental methods, Aircraft structures, Composite structures and Smart structures, Structural dynamics and aeroelasticity, Aircraft propulsion, Thermal sciences and Engineering, Combustion, Flight mechanics and control.
KHAG01 Agricultural and
Food Engineering
Farm Machinery and Power: Farm Machinery Design, Farm Power, Tractor hydraulic systems, Soil Dynamics in
Tillage and Traction, Ergonomics, Biofuels, Solar and Wind Energy, Agricultural Mechanisation, Precision farming, Electronics and Computer application in Agriculture.
Land and Water Resources Engineering: Watershed Modeling and Management, Irrigation Systems Management; Groundwater Modelling; Rainwater Harvesting, Flood Modeling, Non-point Source Pollution, Climate Change, Green
House Technology. Food Process Engineering: Dairy and Food Engineering, High Pressure Processing, non-thermal processing of foods, Mechanised Processing of Food, Physical and Thermal Processing of Food, Packing of Fruits and Vegetables, Cryogenic Processing of Foods, Health Foods, Functional Foods, Cereal Processing, Grain Processing, Dairy Products, Solar-Thermal Applications in Foods, Processing of Horticultural and Plantation Crops. Agricultural Biotechnology: Microbial and Enzyme Technology; Plant Tissue Culture, Algal Biotechnology, Biotechnology of Medicinal and Aromatic Plants.
Agronomy: Climate Change Impact Assessment on Crop Yields, Organic Farming, Tea Cultivation and Processing. Soil Science: Water and Nutrient Management, Soil Physics.
Aquacultural Engineering: Waste Utilization and Agro Environmental Technology, Aerators, Cage Aquaculture, Fish Processing Technology, Biofloc Technology.
KHAP01 Architecture and
Regional Planning
Universal Design, Building Automation and Management Systems, Building Materials and Composites, Urban design, City Planning, Computer Applications in Architecture and Planning, Disaster Responsive design and planning, Green Architecture, Energy Efficient and Cost-effective Building Technology, GIS and Remote Sensing, Heritage studies and Conservation, Housing and Community Planning, Infrastructure Planning and Systems Management, Metropolitan Planning, Recreation and Tourism Planning, Regional Planning, Spatio-environmental Planning and
Design, Transportation Planning and Traffic Engineering, Urban Development Management, Urban Open Space, Water Sensitive Planning.
KHBT01 Biotechnology
Bioinformatics, Tissue Engineering, Bioreactor /bioprocess development,
Enzyme Technology, Plant biotechnology Down stream processing, Genetics, Environmental biotechnology, Cell/molecular biology,
Biochemistry, r-DNA Technology, Structural Biology.
Minimum Qualification
Minimum 60% of marks (or equivalent
Grade point average) is required in case of M.Sc./M.Tech degree.
KHET01 Center for
Educational Technology
AI and Cognitive Science in Education and Assessment, Instructional Pedagogy Design, Learning Science and Educational Psychology, E-learning, Speech Technology, Language processing for e-learning.
KHCH01 Chemical Engineering
Transport Operations, Membranes and other Separation Processes, Reaction Engineering, Particulate Technology, Process Dynamics & Control, Fuel and Mineral Processing, Petroleum Refining & Petrochemicals, Industrial Pollution Control, Modeling & Simulation of Chemical Processes, Green Process Technology, Micro-Scale Heat Exchange & other processes, Advanced Materials Engineering using Plasma, Polymer Engineering etc.
KHCY01 Chemistry
DNA Interacting Molecules, Enzyme Inhibitors, Bio-mimetic, Bio-Inorganic Chemistry, Protein Chemistry, Synthetic Organic Chemistry, Surface Chemistry & Catalysis, Nano Crystalline Semi –conducting Magnetic Metal Chalcogenides and Magnetic Ferrites, Biologically Active Compounds: Stereo selective Synthesis, Isolation and Characterization of Bioactive Materials, Macromolecules, Colloids and Drug Delivery, Environmental Chemistry, Energy from Non-conventional Sources, Aromaticity in Metal Clusters, Nanoparticle Catalysis, Nano Technology, Solid State Chemistry, Supra- molecular Chemistry, Transition Metal Chemistry, Self-assembly and Metallahelicates in Coordination Chemistry, Organometallic Chemistry, Homogeneous Polymer Anchored Catalysis, Photochemistry & Photophysics in Organized Assemblies, Carbohydrates and Nucleosides Biological D u a l Perspectives, Enantiomeric Separation Using Capillary Electrophoresis, Density Functional Theory: Quantum Chaos, Chemical Reaction Dynamics in Liquids and Biological Systems, Computer Simulations of Complex Systems with Applications in Biology and Materials Science, Electrocatalysis, Electrochemical Biosensors, Chemical Reactivity, Quantum toxicology.
KHCE01 Civil Engineering
Structural Engineering, Hydraulic and Water Resources Engineering, Geotechnical Engineering, Transportation Engineering, Environmental Engineering and management.
KHCS01 Computer Science
and Engineering
Artificial Intelligence, Speech and Language Processing, Software Reliability, Data-base systems, VLSI System Design, Embedded Systems, Fault Tolerant Computing, Distributed Systems, Computer Networks, Image Processing and Computer Vision, Computational Geometry, Theoretical Computer Science, Bioinformatics, Assistive Technology, Formal Verification, Cryptography and Network Security.
KHCR01 Cryogenic Engineering
Production, Storage and Utilization of Industrial Gases, Air Separation, Mass Transfer and Separation Processes, Natural Gas Processing and Liquefaction. Hydrogen Energy, Low Temperature Adsorption of Gases, Gas Hydrates, Computer Aided Design of Cryogenic Process Plants, Closed Cycle Cryocoolers, Low Temperature Heat Exchangers, Expansion Machines, Heat Transfer, Cryogenic Rocket Propulsion, Magnetic Refrigeration Materials, Spintronics, Superconducting Magnets and Applications, Thermo Physical Properties of Nanoscale Materials, Magnetic Sensors, Vacuum Technology and Process Applications. Helium Liquefaction and Refrigeration, Oxygen Safety, Superconducting Magnetic Energy Storage, Cryogenic/Superconducting/Vacuum aspects for nuclear fusion and Power Applications.
44
Code Department Fields of Specialization
KHEE01 Electrical Engineering
Machine Drives and Power Electronics: Control of drives, Switched mode and resonant mode power supplies, Power Converters, Medium voltage converter topology and drives, Digital control of SMPS, Energy
Efficient drives, Electro-magnetic Levitation, Variable Speed Constant Frequency Generation Systems, Automated
Electrical Vehicles, Non-linear Phenomena in Power Electronics, Bifurcation and Chaos in Hybrid Dynamical Systems.
Control System Engineering: System identification and modeling, Fault detection, diagnosis and control, Learning control, Nonlinear control, Robust control, Intelligent control, System Theory, Large-scale systems, Reduced
order modeling, Fuzzy control, Periodic controllers, Attitude and orbit control of launch vehicles and satellites, Embedded Systems Fractional-order systems and control, Control Allocation.
Power & Energy Systems: Power Systems Analysis, Dynamics, Modeling and Control, Power System Stability,
Protection, Real-time Simulation, High Voltage Engineering, Photovoltaic, Wind Energy, Energy modeling and Management, Insulation Engineering, Condition monitoring of power apparatus, Digital relaying, Power Quality,
Electrical Power distribution systems, Power System deregulation, FACTS design including devices, Distributed
generation, Microgrid.
Instrumentation and Signal Processing: Instrumentation and signal Processing: Sensor development MEMS and
Mixed signal VLSI design and validation, Magnetic sensing, Medical instrumentation and imaging, Embedded systems, Signal/Image processing, Machine learning.
KHEC01
Electronics and
Electrical Communication
Engineering
Device modeling, Technology CAD, Silicon Heterostructures, Compound Semiconductor Electronics and Optical
Devices, MEMS and Nanotechnology, Mixed signal design, Low Voltage Low Power Circuit Design, Low Power RF IC Design, Design of VLSI based Signal Processing Chips, SOC based Embedded System /VLSI for Biomedical
Instrumentation, VLSI Testing, Fault Diagnosis, Design Automation of Analog VLSI Circuits, Circuits for High
Speed Wired Link, On-chip Power management.
Antennas, Planar and Waveguide Circuits, RFICs; RF MEMS; Metamaterials; RF- VLSI Interconnects; EMI, EMC,
EMP, Radar Cross section, Microwave Imaging; Channel Modeling for Wireless Communication.
Image and Video Coding, Computer Vision, Video Surveillance, Medical Image processing Multimedia,
Database, Multimedia Network, Parallel and distributed Processing, Audio coding, Computer Architecture, Embedded
Systems, Network-on-Chip.
Computer Networks, Wireless Communications and Networking, Wireless Internet, Multiuser Receiver, Multiband
OFDM, Channel Coding, Link Adaptation Techniques, MIMO Systems, Capacity Mobile Adhoc Networks, Wireless
Sensor Networks, Optical Communications and Networking, WDM Transmission, Fiber Nonlinearities, Wavelength
Routed Networks, Passive Optical Networks, Optical Burst Switching, Cognitive Radio, 4G Cellular, Fiber Optics,
Fiber Optic Sensors, Fiber Optic amplifiers and Lasers, Plasmonics, Photonic Crystal Fibers and Waveguides.
Architectural Optimization, Adaptive Filters, Wavelets and Multirate-DSP, DSP Application in Wireless Communication, Biomedical Signature Analysis, Voice Signature Analysis, Detection and Estimation, Modeling of Signals and Systems
KHGG01 Geology and Geophysics
Igneous and Metamorphic Petrology, Ore Petrology, Geochemistry and Mineralogy, Isotope Geology, Precambrian Geology and Tectonics, Structural Geology, Microtectonics, Stratigraphy and Sedimentary Geology, Basin Analysis, Applied Micropaleontology, Paleoceanography and Paleoclimatology, Coastal and Quaternary Geology, Mineral Exploration and Resource Potential Mapping, Hydrogeology, Groundwater Contamination, Remote Sensing and GIS, Environmental Geochemistry of water, soil and air-their contamination by natural and anthropogenic factors, Landslide Hazards, Gravity, Magnetic and Electrical Fields Electrical Fields (including modeling and numerical analysis), Seismic and Electromagnetic wave Propagation (including modeling and numerical analysis), Nuclear Geology and Geophysics, Geophysical Exploration of minerals, ground water and hydrocarbons, Airborne Electromagnetics & Exploration of Deep Seated Uranium Ores, Earthquake Hazard Assessment and Seismic Microzonation, Geotomography, Pattern Recognition in Geophysics, Strong Motion Seismometry, Computational Geophysics.
KHGT01 G. S. Sanyal
School of Telecomm-unication
Digital Communication, Mobile Communications, Information Theory and Capacity Analysis. Error Control
Coding, Digital Signal Processing, Optical Communications, Tele Communication Networks, Multimedia
Communications, Detection and Estimation Theory, RF and Digital Design for Telecommunication, Cognitive Radio.
KHHS01 Humanities and
Social Sciences
English Language and literature, American Literature, Afro-American Literature, Comparative Literature, Post-colonial Literature, Indian Literature, Dalit Literature, Indian Aesthetics, Media Culture, Culture Studies, Communication Studies, Econometrics and Applied Economics, Financial Economics, Economic Planning and Policies, Managerial Economics, Organizational and Development Economics, Agricultural Economics, Manpower Planning. Human Resource Development and Management, Organizational and Social Psychology, Interpersonal Communications, Clinical Psychology and Neuropsychology. Philosophy of Mind, Logic, Applied Ethics. Rural and Urban Sociology, Sociology of Development and Sociology of Health.
KHMS01 Materials Science
Polymer composites, Polymer Synthesis & Characterization, Semiconductor Materials Opto-electronic Materials, Wide
Band Gap Semiconductors, Synthesis and Processing of Glass and Ceramics, Nano and magnetic materials.
Minimum Qualification :
B.Tech/B.E Degree in Chemical Engineering/
Technology, Ceramic and glass Technology,
Materials Technology, Plastic and/or Rubber Technology, Polymer Science and
Technology With 60% marks minimum.
M.Sc. in Physics, Solid State Physics, Chemistry, Material Science, Polymer Chemistry, Electronic
Science. With 60% marks minimum
KHMA01 Mathematics Fluid Mechanics, Numerical Analysis, Statistics, Operation Research, Computer Science, Functional Analysis, Complex Analysis, Computational Fluid Dynamics, Algebra, Fuzzy Mathematics, Artificial Intelligence, Data Base Management Systems. Cryptography, Graph Theory, Applied linear algebra.
45
Code Department Fields of Specialization
KHME01 Mechanical
Engineering
Fluid machanics.CFD, Hydrodynamic stability, Multiphase flow, Numerical heat transfer, Experimental heat transfer and fluid flow, Liquid fuel atomization, and Spray combustion, I.C Engines, Fluidised bed combustion, Refrigeration and air conditioning, Transcritical CO 2 and natural refrigerant based heat pumps, Thermal systems modeling and optimization, Solar energy, Optical diagnostics of thermo-fluid systems, Thermal hydraulics of nuclear plants, Microfluidics and Micro- scale transport processes. Casting, Welding and Metal forming, Maching and grinding, Machine tools, Cutting tools and coating, Tool condition monitoring, Plasma-spray ceramic coating, Electrophysical machining process, Precision manufacturing and laser
processing, Computer aided design and manufacturing, Computer Aided Process Planning, Rapid Prototyping,
Intelligent Machines and Systems, Numerical Modeling of Manufacturing Process.
Systems, Modeling and design using Bond Graphs, Modeling and control of Microsystems, MEMS, Automotive
Engineering, Noise Vibration Control, Signal Processing in Mechanical Systems. Finite Element Method and
Boundary Element Method, Computational solid mechanics, Non-linear Mechanics, Fracture mechanics, Composite materials, Smart materials and Structures, Biomechanics, Industrial, bio- and nano- Tribology, Surface Engineering,
Mechanical Systems Dynamics, Rotor Dynamics, Vehicle Dynamics ,Bifurcation and Chaos, Condition monitoring
and Fault tolerant control, Mechanical handling systems and Industrial automation, Industrial fluid power and control.
KHMT01 Metallurgical and
Materials Engineering
Physical Metallurgy, Extractive Metallurgy and Mineral Processing, Steel Technology, Process Modeling, Corrosion Science and Technology, Mechanical Metallurgy, Structural Integrity, Casting and Solidification, Powder Metallurgy, Welding Metallurgy, Computational Material Science and Technology, Nanostructured Materials, Bulk Metallic Glasses, Biomaterials, Electronic and Magnetic Materials, Functionally graded Materials, Intermetallics, Composites. Tribology and Surface Engineering, Thin films and coatings.
KHMN01 Mining Engineering
Experimental and computational geomechanics, Geostatistics, GIS and Remote Sensing: Subsurface and surface environment (heat, air, water and soil), waste (fly ash, mill testing) characterization and utilization. Occupational
health and safety, Mining systems and management, Material- Rock Interaction, Mineral Economics and Mining
Finance, Environmental Impact Assessment and Management, Waste Remediation, Mining Machinery & Bulk material Handling, clean coal technology; Coalbed methane and shale gas; Mineral processing. Explosive, Blasting
and ground vibrations.
B.Tech/BE/ in Mining Engineering, Civil, Mechanical Engineering, Petroleum Engineering, Chemical Engineering, Mining Machinery and Mineral Processing, M.Sc in Physics, Applied Geology, Mathematics and Geo-Informatics,
M.Tech.in Chemistry, Geo-Informatics and Geo-Physics.
KHOE01 Ocean
Engineering and
Naval Architecture
Marine Hydrodynamics, Marine & Ocean Structures, Ocean Engineering Materials, Fluid – Structure Interaction, Marine Design, Marine Production and welding, Ocean Engineering, Coastal Engineering, Water Wave Mechanics, Physical and Dynamical Oceanography, Ocean Wave Modeling, CFD. Numerical Simulation and Analysis of Ocean Structure.
KHPH01 Physics Astrophysics & Cosmology, Condensed Matter Physics, Ferroelectrics & Dielectrics, Fiber Optics, Magnetism, Multiferroics, Nanoscience & Nanotechnology, Nonlinear Optics, Nonlinear Instability, Nuclear Physics, Quantum Mechanics & Field Theory, Radiation Measurements, Semiconductor Devices, Solid State Ionics, Thin Films, Renewable Energy Sources.
KHRT01 Rubber Technology
Polymer blend & alloys, Composites, Polymer and Rubber Processing, Product Development, Polymerization, Development of Novel Polymers, Structure-Property Correlation, Waste Polymer Recycling, Thermoplastic Elastomer, Adhesion and Surface Treatment, Nanocomposites, Polymer Rheology, Smart Polymers. Rubber Composities and Compounding, Rubber Product Design & Development.
Minimum Qualification: Master's degree in Science/ Engineering/ Technology or its equivalent with minimum 60% marks.
KHRD01 Rural Development
Transfer of technology; Socio-economic aspects of Rural Development, Planning and development models, Crop, water and land use planning; Information Technology in Rural Development, Tribal Development, Upgradation of technology.
Minimum Qualification : Master’s degree with at least 60% marks (or equivalent Grade point average) in Agricultural Engineering, Agricultural Science, Agricultural Economics, Agricultural Extension, Sociology, Economics, Rural Development, Rural Management, Rural Infrastructure, Biotechnology, Environmental Science, Remote Sensing and GIS, Human Resource Management.
KHIM01 Industrial and
Systems Engineering
Operations Research, Operations Management, Logistics and Supply Chain Management, Healthcare Systems Management, Project Management, Manufacturing/Production Planning and Control, Performance/Productivity Analysis, Quality Design, Control and Improvement, New Product Development ,Process Transforma, Ions and Lean Six Sigma, Work Systems Design, Human Computer Interaction(HCI), Ergonomics and Human Factors Engineering, Safety Analytics, Operation Analytics, Quality Analytics, Industrial Analytics, Data Analytics and Big Data, Decision Support System, E-Business, Management Information System, Software Project Management, Service Science, System Dynamics and Simulation, Systems Engineering.
Minimum Qualification :
BTech degree in any branch
of engineering and MTech in
Industrial/ Production/
Mechanical/ Manufacturing/
Computer/ IT/ Reliability &
Safety/ Other related fields
or MBA with a minimum
of 60% marks or equivalent
in all examinations from 10th
standard onwards.
46
Code Department Fields of Specialization
KHRE01 Reliability Engineering
System Reliability assessment, Reliability and design, Reliability simulation, Machinery Fault Diagnosis, Maintenance Engineering & Management, Risk and Safety Assessment, Software reliability.
KHID01
Ranbir and Chitra Gupta
School of Infrastructure Design and
Management
Project Engineering and Management; Financing Infrastructure Projects; Quantitative Methods for Decision Making;
Simulation Laboratory; Environmental Impact Assessment; Infrastructure Regulatory Issues; Virtual Reality Lab.;
Transportation: Urban Transportation Systems Analysis, Evaluation and Planning; Airport Planning; Bridges and
Tunnels Engineering; Analysis and Design of Pavements, Traffic Engineering; Highway Construction Practice and
Planning; Sea and Inland Port Infrastructure; Water Supply Systems; Waste Water Management; Solid Waste
Management; Air Quality Management; Environment Sanitation; Hazardous Waste Management; Housing and
Community Planning; Facility Programmeming & Specialized Building Design; Building Management Systems;
Regional Infrastructure Development; Remote Sensing and GIS; Thermal, Hydel and Nuclear Power Generation;
Power Infrastructure: Generation, Transmission and Distribution; Internal Combustion Engine; Power Transmission
Systems; Non-conventional Energy Systems; High Voltage and Insulation Engineering; Power Infrastructure:
Economics, Management, and Environment; Power System Planning and Reliability; Air-conditioning and
Ventilation; Power Systems Transients and Protection.
KHMG01
Vinod Gupta
School of
Management
Accounting, Finance, Business Economics, Strategy, Technology Management, Operations management, Organizational
Behavior, Human Resource Management, Marketing, Business Communication.
Eligibility: MBA with a Postgraduate Degree/ M.Tech/ A Post Graduate Degree.
KHEN01
School of Energy
Science &
Engineering
Fundamentals of Energy Sciences: Thermodynamics, Thermochemical and Electrochemical Reactions, Transport phenomena including heat and mass transfer
and electrochemical phenomena, Solid-state phenomena including photo, thermal and
electrical aspects, Bio-processes, Nano-sciences, Deep ocean processes, Gas and Fluid Dynamics, Nuclear sciences.
Energy Resources and Recovery: Traditional resources - Coal, Petroleum, Natural
Gas; Others - Solar, Wind, Geothermal, Wave, Ocean-thermal, Biomass, Hydrogen, Gas from non-conventional sources - Gas Hydrates, Coal beds, Tar sands.
Energy Systems: Energy Conversion Systems for Oil, Gas, Coal, Solar, Wind,
Biomass, Nuclear, Hydrogen, Ocean Waves, Waste. Power generation, distribution, transmission, access; Transportation Power Systems - IC Engine, Advanced Fuel
Technology based combustion ignition, Electric, and Hybrid Systems. Embedded
generation systems; Smart grids; Electrochemical systems; New age Fuel systems and process development; Hybrid and electrical systems; Battery & super-capacitors;
Energy systems for marine, space and difficult terrains.
Other Aspects of Energy Science & Engineering: Energy Materials; Energy Storage
& Transportation; Energy Efficient Devices & Systems; Energy Efficient Design of
equipment, buildings and appliances; Sustainable Energy; Conservation; Recycling
and Management: Environment and Climate Change; Computational Aspects; Energy
Economics; Energy byproduct (particularly carbon) recycling, capture, sequestration
and storage; Rural and small scale energy research.
Minimum Qualification:
(i) M.Sc.- Chemistry/ Physics
/Biotechnology
(ii) M.Tech – Electrical
Engineering/ Electronic
Sciences/ Electrical
Communication
Engineering/ Mechanical
Engineering/ Civil
Engineering/ Chemical
Engineering/Bio-technology
KHEV01
Centre for
Oceans, Rivers,
Atmosphere and
Land Sciences
The centre is involved in frontier research in oceanographic and atmospheric observational and modelling. In
oceanography, the areas of present research activities include numerical modelling of Bay of Bengal and Indian Ocean,
wave modelling and ocean circulation. In atmospheric research, the present focus is on the observations and modeling
studies of severe thunderstorms. Besides, the centre is also involved in mesoscale modelling of extreme weather events
viz., tropical cyclone, heavy rainfall, and flash floods etc. The areas of specific interest in this direction are mesoscale
data assimilation and micro-physical processes. The centre is also involved in observational modeling studies of urban
boundary layer, regional climate modelling and impact assessment studies. Space based observations, retrievals;
validation and assimilation of geophysical parameters of ocean, atmosphere and land are another area of research of
the Centre. In view of India's active research in Antarctica, the Centre is also focusing on the remote sensing of sea-ice
and southern ocean in relation to climate studies.
KHAT01
Advanced
Technology
Development
Centre
Current areas of research focus in laboratories directly under ATDC include VLSI Design and CAD, MEMS and BIO-
MEMS, Nano-electronics and material sciences, MBE and MoCVD Technology, Bio-energy, Embedded Controls and
Software, Plant Genetic Engineering, Communication Empowerment, High-speed and Heavy-Haul Technology for
Railways, Reliability Analysis, Micro and nano-Fluidics, etc
KHWR01 School of Water
Resources
Integrated water resources planning and management;
River basin planning and management (considering the aspects of flood, drought or contaminant); Water and
wastewater treatment; Surface and groundwater quality
control; Conjunctive use of surface water and groundwater;
Urban, rural and industrial water supply and distribution
systems; Remote sensing and GIS application in water
resources; Modelling of fate and transport of contaminants; Water governance and policy issues; Environmental impact
assessment; Surface water and groundwater interaction;
Water resources system analysis; Irrigation and drainage system
Minimum Qualification: Specialization M.Tech/M.E.
in Water Resources, Environmental, Irrigation &
Drainage, Soil & Water Conservation, Chemical Engineering and Biotechnology.
47
Code Department Fields of Specialization
KHMB01
School of
Medical Science
and Technology
Medical Imaging and Image Analysis; Rehabilitation
Engineering; Biomedical Sensors and instrumentation; Healthcare Information Management System; Preventive
and Promotive Healthcare System; Bio-markers and their
application in Oncology; Tissue Engineering; Biomaterials; Nano-technology and MEMS in Medicine;
Prosthesis; Orthosis and Implant Design; Reproductive
Biology.
Minimum qualification: Degree in any one of the areas
(a) B.Tech. (Bachelor of Technology, M.Sc. (Master of Science), MBA (after BA/ B.Sc/ B.Com) MA (Master of
Arts), B.Arch. (Bachelor of Architecture) B.Sc (Engg.),
PG Diploma in Management of 2-year duration (after BA/ B.Sc/ B.Com), MBBS degree with compulsory one
year internship completed OR A degree equivalent to
any of the above. (b) M. Tech (Master of Technology), M. S., M. C. P.
(Master of City planning) M. E., M. R. P. (Master of
Regional Planning) M. Sc. (Engg.), M. Arch. (Master of Architecture) M. Phil., M.B.A. (after B. Tech./ M.Sc./
M.A./ M.Com.) 2 year M.B.M., 2 years of LLM
programme after either at least 5 years of integrated LLB degree after 10+2 examination OR 3 years LLB degree
after 10+2+3 examination OR A degree equivalent to
any of the above.
48
7. Indian Institute of Technology Madras, Chennai 600 036 –MD
In all cases the eligibility requirement for consideration for admission to Ph.D is a First Class or Equivalent with a minimum of 60% marks or 6.5/10
CGPA for General and OBC candidates and minimum of 55% marks or CGPA of 6.0/10 for SC/ST candidates in the qualifying Masters degree in
Engineering/Technology/Science as indicated under minimum qualifications in the table given below for different departments. Minimum marks or
CGPA is to be based on all the years/semesters of the qualifying examination put together.
Code Department Fields of Specialization Minimum Qualification
MDAE01 Aerospace
Engineering
Aerodynamics: Helicopter Aerodynamics, Geo-Physical
Fluid Dynamics, Subsonic, Transonic, Supersonic, Hypersonic, Shock and Blast Wave Dynamics (Theoretical
and Experimental), Rarefied Gas flows (Theoretical and
Experimental), Boundary Layers and Stability of Flows, Turbulent Flows, Shock Tubes and Related Problems,
Development of Algorithms and Code for Numerical
Methods in Gas Dynamics and Computational Fluid Dynamics, Vortex Dynamics, Supersonic Mixing and
Combustion, Optical Flow Diagnostics, Linear and
Nonlinear Acoustics.
Aircraft Structures: Finite Element Methods, Numerical
Methods, Composite Structures, Fatigue and Fracture
Mechanics, Contact Mechanics, Vibration and Impact Mechanics, Constitutive Modelling.
Aerospace Propulsion: Rocket Propulsion and Solid
Propellant Combustion, Airbreathing Propulsion and Combustion, Cascade Flows, Multiphase Flow Simulation,
Combustion Instability, Optical Flow/Combustion
Diagnostics.
Dynamics & Control: Non-Linear Dynamics in Aerospace
Applications, Computational Methods in Nonlinear
Dynamics, Nonlinear Control Theory and Applications, Flight Simulations and Controller Development, Design
Development of Autonomous Flying Vehicles.
Master’s degree or its equivalent in Aerospace/ Civil/
Applied Mechanics/ Mechanical/ Chemical or Master’s degree in Mathematics/ Physics and aptitude for
research. Science Post- graduates should have
exceptional merit and research or industrial experience in the appropriate field. Candidates with Master’s degree
in other allied engineering specializations can also be
considered provided they have either basic degree in Aerospace Engineering or atleast five years experience
in Aerospace industry/ Research Organisation.
MDAM02 Applied
Mechanics
Biomedical Engineering :- Cardiovascular System
studies, image and Signal Processing, Speech Signal Processing, Ultrasound and Laser instrumentation in
Medicine, Biomechanics, Rehabilitation Engineering, Evoked Response and Functional Electrical Stimulation,
Physiological Modeling, Biomaterials, Biosensors,
Medical Diagnostics. Cellular biomechanics, Neuromechanics.
Fluid Mechanics:- Laser Diagnostics, Turbulent Convection, Computational Fluid Dynamics (CFD), Bluff
body and Industrial Aerodynamics, Fluid Structure
Interaction, Experimental Fluid Mechanics, Sprays and multiphase flows.
Solid Mechanics:- Computational and Experimental studies in fatigue, fracture, smart materials, photo elasticity,
plasticity, vibrations, control, composites, biomechanics,
constitutive modeling and stochastic mechanics.
Biomedical Engineering area:- Master’s degree in Applied Mechanics / Civil / ECE / Mechanical/
Electrical/ Biomedical Engineering/ Computer Science/
Instrumentation/ Metallurgical Engineering.
Fluid Mechanics area:- Master’s degree in Applied
Mechanics / Civil / Mechanical / Aerospace / Chemical/ Biomedical Engineering/ Engineering Mechanics
Solid Mechanics area:- Master’s degree in Civil/ Aerospace/ Mechanical/ Naval Architecture, Production
Engineering with an aptitude for research in Solid
Mechanics.
MDCH01 Chemical
Engineering
Transport and Reaction Engineering, Systems and Control, Biochemical Engineering, Environmental
Engineering, Materials and processes Master’s degree in Chemical Engineering
MDCY01 Chemistry Inorganic Chemistry, Organic Chemistry and Physical &
Theoretical Chemistry Master’s degree in Chemistry.
49
Code Department Fields of Specialization Minimum Qualification
MDBT01 Biotechnology
Research Areas
The department focusses on a wide array of research
topics, reflecting the diversity of modern biotechnology.
The four thrust areas of Research (M.S. and Ph. D.), are listed here:
I. Biological Sciences
Molecular oncology • Cancer immunotherapy • Anti-cancer nutraceuticals • HIV pathogenesis • Stem cell
biology • Biomarkers for cardiovascular disease • Gene
regulation in hypertension • Molecular and cellular basis of cardiovascular complications • Structure - function
relationship of ion channels • Ion channels associated
with ischemic heart diseases and stroke • Nanoparticles • Nanobiotechnology of food packaging • Nucleolar
GTPases and cell proliferation • Pattern formation in
cellular slime moulds • Plant developmental genetics •
Recombinant Enzymes • Biofuel cells • Biorefinery
II. Biological Engineering
Industrial metabolite production • Metabolic engineering • Biopolymers • Biocompatibility • Biodegradation of
polymers • Tissue engineering • Caffeine degradation •
Membrane biochemistry • Plant cell bioprocessing • Phytoremediation • Biofuels • Process chromatography •
Reactive species in biological systems
III. Computational Biology
Protein structure, folding and function • Protein
dynamics • Computational analysis of protein folding and stability • Binding specificity of protein complexes •
Green chemistry • Structure-based drug design and
discovery • Comparative genomics • Computational modeling of neurodegenerative disorders •
Computational systems biology • Development and
analysis of databases and tools • Computational biophysics • GPGPU computing for systems biology
IV. Chemical Biology
‘Green’ biocatalytic methods for organic transformations
• Delivery of siRNAs • Fragment-based drug design •
Novel inhibitors against HDACs and HMT • Asymmetric catalysis.
Same as for our regular Ph.D programme.
MDCE01
Civil Engineering
Building Technology & Construction Management
Master’s degree in Civil, Ocean or Industrial Engg.,
Industrial Management or MBA after obtaining a basic
degree in Civil Engineering, or in Architecture, Housing, Town & Country planning after obtaining a basic degree
in Civil Engg., or Architecture with first Class.
MDCE02 Environmental and Water Resources Engineering
M.Tech or M.S. or equivalent degree in Engineering
Mechanics/ Aerospace Engineering/ Agricultural
Engineering/ Civil Engineering/ Environmental
Engineering or M. Tech or M.S. or equivalent degree in Chemical Engineering/ Biotechnology.
MDCE03 Geotechnical Engineering
Master’s degree in Civil or Ocean Engineering or
Engineering Mechanics, Mining Engineers. With two years experience.
MDCE04 Structural Engineering
Master’s degree in Civil, Ocean, Aerospace, Naval
Architecture, Mechanical, Computer Science or in Engineering Mechanics with basic degree in Civil
Engineering or Infrastructural Civil Engineering.
MDCE05 Transportation Engineering
Master’s degree in Civil/ Architecture/ Town and
Country Planning/ Regional Planning/ City Planning/ Urban Engineering or 2 years full time Postgraduate
Diploma in Town and Country Planning with
specialization in Traffic and Transportation Planning of the School of Planning and Architecture, New Delhi/
MBA after obtaining a basic degree in Civil
Engineering.
50
Code Department Fields of Specialization Minimum Qualification
MDCS01
Computer
Science &
Engineering
Intelligent Systems and Human Computer
Interaction:
Artificial Intelligence, Computational Brain Research,
Machine, Learning, Pattern Recognition, Visualization and Perception, Information Management,
Computational Biology, Data Mining, Image Processing,
Digital Speech Processing, Video Processing.
Systems Engineering:
Compiler Design, Computer Architecture, Computer
Networks, Cyber-Physical Systems, Distributed Systems, Hardware and NetworkSecurity, High
Performance Computing and Parallelization, Object
Oriented Systems, Parallel, Distributed and Cloud Computing, Programming Languages, VLSI Design.
Theoretical Computer Science:
Algorithms, Computational Complexity Theory, Cryptography.
M.Tech/ M.E./ M.S. in Computer Science & Engineering or Information Technology.
MDEE01
Electrical Engineering
Communications, Networks, Signal processing, Speech
& Image Processing Information Theory. Electronics & Communication Engineering.
MDEE02 Power Systems & Power Electronics. Electronics & Communication Engineering, Electrical & Electronics Engineering, Instrumentation
Engineering.
MDEE03 Micro Electronics & VLSI Design. Electronics & Communication Engineering.
MDEE04 Control and Instrumentation.
Electrical and Electronics Engineering, Electronics and
Communication Engineering, Control and
Instrumentation Engineering.
MDEE05 Microelectronics.
B.E./ B.Tech. /M.Sc., in Electrical & Communication
Engineering/ Instrumentation Engineering / Electrical
& Electronics Engineering / Physics who qualify with GATE subject EE/EC/IN/PH.
MDEE06 Integrated Circuits and Systems.
Electronics & Communication Engineering, Electrical
& Electronics Engineering, Instrumentation
Engineering.
MDER01 Engineering
Design
Automotive Engineering: Vehicle Dynamics, Tyre
Mechanics, Mathematical Modelling of Dynamic
Systems, Control, Fault, Diagnosis, Automotive Systems,
Intelligent Transportation Systems.
Biomedical Design: Medical Imaging, Biomechanical
Modeling, Soft Tissue Mechanics, Bio-fluid Mechanics, Prosthetic and Scaffold Design, Biomedical Devices and
Control Microwave Applications, Tissue Ablation and
Hyperthermia Physics, Radiometry, Ergonomics, Rehabilitation Engineering, Bio-MEMS/NEMS,
Biomedical Micro/Nano devices.
Materials and Design: Geometric and Solid Modeling, Computational Geometry, Shape Search, Shape
Optimization, Image Based Reconstruction, Solid Free
Form Fabrication, Design Theory, Reliability, Fatigue and Fracture, Finite Element Analysis, Digital Image
Correlation, Material Characterization, Structural Health
Monitoring, Design with Smart Materials, Sustainable Manufacturing.
Robotics and Mechatronics: Parallel Manipulators,
Underwater Robots, Path Planning, System Dynamics and Control, Opto-mechatronics, Sensing.
Master’s degree in Aerospace, Automobile, Biomedical,
Civil, Computer Science, Electrical, Electronics,
Engineering Physics, Instrumentation, Mechanical, Metallurgical, Material Science, Naval Architecture,
Production / Manufacturing Engineering, or Master’s
degree in Design (Engineering) (M.Des.) or M.Tech. (Industrial Mathematics).
51
Code Department Fields of Specialization Minimum Qualification
MDHS01 Humanities & Social Science
Economics: Development Economics, Energy and
Environmental Economics; Applied Econometrics;
Industrial Economics; Microfinance; International
Trade; Economics of Innovation and Technological
Change; Health Care Economics and Public Policy;
Financial Economics and Banking; Economics of
Education/Labour Markets; Urban Water Management.
Education and Technology Studies: Theories of
Learning; Information and Communication
Technologies (ICTs) in Higher Education; Engineering
Education; Engineering Ethics; Assessment and
Evaluation in Higher Education; Quality Assurance.
History: Modern Indian History, History of Science,
Technology and Medicine (since 1700s).
Linguistics: Language in Education; Sociolinguistics;
Applied Linguistics; syntax/Morphology.
Literature and Media Studies: American Literature;
English Literature; Eco-criticism; (American/British);
Disabilty Studies; Film and Media Studies; Popular
Culture; Life writing.
Philosophy: Phenomenology; Hermeneutics;
Philosophies of Heidegger and Wittgenstein; Indian
Philosophy; Philosophy of Mind; Consciousness;
Analytical Philosophy; Philosophy of Language;
Political Philosophy; Ethics; Professional Ethics
(Engineering and Higher Education); Bioethics.
Politics & International Relations / Political Science:
International Relations Theory; International Political
Economy; Taiwan Studies; Chinese Studies; Democracy
Theory and Practice.
Sociology/ Anthropology: Sociology of Religion; Islam;
Sociology of Work and Gender; Anthropology of body;
Anthropology of Technology; Gender Studies; Disability
studies; Sociology of Science.
Master’s degree in relevant discipline.
MDMS01 Management
Studies
Consumer Behaviour, Positive Organizational Behaviour: Workplace Emotions, Ancient Indian Wisdom in
Management, Creativity & Innovation, Cross-Cultural
Research, Cognition in organizations, Corporate Sustainability: Responsible Business.
Comparative Management Systems, Global leadership:
Mindset, Potential, Practices, Work and Wellness Training & Development, Workplace teams; Career Management,
Experiential Marketing, Advertising; Data Science and
Analytics. Technology transfer, Innovation and Entrepreneurship,
Experimentation and reinforcement learning,
Competitiveness and business excellence, Public Systems; Supply chain and Logistics: Green concerns, healthcare and
food sectors. Game Theoretic Models, Scheduling in manufacturing and
service operations, Integrated Production, Logistics and
Inventory Optimization in Supply Chain Management, Behavioural Decision Theory; Corporate Finance:
Financial decision making, Venture capital and private
equity, Small and medium enterprises , Infrastructure finance, Public sector finance; Real Options,
Developmental Finance, Financial Markets – Capital
market, Bond market, commodity market, derivatives, market microstructure, Behavioural Finance, Financial
Modelling & Forecasting, Banking and risk management;
E-commerce.
Post graduate degree in Sciences/ Social Sciences/
Humanities/ Commerce/ Engineering/ Technology/
Management.
Above 65% (Aggregate) for Engineering, Science,
Management Degree - UG (General /OBC)
Above 60% ( Aggregate) for Arts and Social Science
Degree – UG (General/OBC)
Above 55% for AMIE and other associateship - UG
Above 60%(Aggregate) for Engineering, Science, Arts
and Social Sciences Degree- If PG is required
(General/OBC)
10% relaxation for SC/ ST/ PH candidates, 5% for OBC
as per GOI rules.
52
Code Department Fields of Specialization Minimum Qualification
MDMA01 Mathematics
Detailed information about the specialization of each faculty member is available in the Department web
site.Mat.iitm.ac.in
Algebra: Commutative Algebra, Algebraic Combinatorics,
Geometry and Topology of Toric Varieties, Group Theory,
, Fuzzy Algebra, Linear Algebra, Algebraic Geometry, Applications of Algebra
Analysis: Functional Analysis, Numerical Analysis,
Complex Analysis, Functional Spaces, Special Functions, Operator Equations, Inverse and III-posed Problems,
Harmonic Analysis, Wavelets, Mathematical
Programmeming, Game Theory, Conformal Geometry, Fixed Point Theory and Applications, Fuzzy Set Theory
and Analysis, Functional Equations, Summability Theory,
Spectral Approximation, Non-smooth Analysis,
Optimization Theory, Sampling Theory, Approximation
Theory, Control Theory,.
Applied Mathematics: Numerical PDE, Convective Heat
and Mass Transfer, Computational Fluid Dynamics, Ship
Hydrodynamics, Mathematical Problems related Naval Architecture and Ocean Engineering, Mathematical
Modeling, Non - linear Differential Equations. Fluid
Mechanics, Bio-Fluid Mechanics, Integral and Differential Equations, Water Waves.
Applied Probability and Stochastic Process: Applied
Probability and Stochastic Processes, Operations Research,
Stochastic Models, Mathematical Ecology.
Theoretical Computer Science and Discrete
Mathematics:
Theoretical Computer Science, Graph Theory,
Combinatorics, DNA Computing, Theory of Codes, Combinatorial Optimization, Discrete Mathematics,
Formal Language, Automata Theory, Modular Computing,
Approximation Algorithms.
Master’s Degree in Mathematics/ Statistics/ Physics/
Computer Science or M.Tech (Industrial Mathematics & Scientific Computing).
MDMM01 Metallurgical and
Materials
Engineering
Metal casting, Metal forming, Metal joining, Materials
Technology, Physical and Structural Metallurgy, Mechanical Metallurgy, Chemical Metallurgy,
Thermodynamics of Metallurgical Systems, Powder
Metallurgy, Ceramics and Composites, Corrosion, Surface Engineering, Biomaterials, Simulation and Modeling of
Materials Processing, Nanostructured Materials, Magnetic
Materials, Amorphous Alloys, Nonequilibrium Processing, Hydrogen Storage Materials, Smart Materials,
Fuel Cells, Metallic Foams, Chemical Sensors, Carbon
Nanotubes, Special Steels, Superalloys, Intermetallics, Materials for Optoelectronic Applications, Shape Memory
Alloys, Fatigue and Fracture Mechanics, High Temperature
Behaviour of Materials and Creep.
Master’s degree in appropriate branch of Engineering/ Technology. Engineering graduates (B.Tech/BE or
equivalent) and Science postgraduates (M.Sc. or
equivalent) to be considered should have exceptional merit and research or industrial experience in the appropriate
field.
53
Code Department Fields of Specialization Minimum Qualification
MDME01 Mechanical
Engineering
i) Design Engineering: Machine Elements ~ design
development, analysis and performance improvements, New materials and design, composites, nano composites,
bio materials, porous materials, radiation damage, surface
engineering, design process, contact mechanics, tribology, tyre mechanics, biomechanics, fatigue and failure analysis,
computational and experimental fracture mechanics,
fatigue crack closure – environment interaction studies, alternate small specimen test methods, small crack
propagation under biaxial multiaxialloading, multi crack
interaction studies, fatigue damage in composites, failure mechanics of biomaterials. Non linear finite element
analysis, Vibration, finite element including coupled
problems, Non destructive evaluation, structural health monitoring, Materials Characterization, Measurements of
Material Properties and Behavior, machinery signal
processing, Condition monitoring of structures machines,
machinery diagnosis, and combustion flame noise,
Acoustics and Noise Control, Prosthetics and human body
movement, Design optimization, constitutive modeling, MEMS, Rotor Dynamics.
(ii) Manufacturing Engineering: Manufacturing
Processes, Technologies, CAD/CAM, Manufacturing Planning and Control, Metrology and Computer Aided
Inspection, Quality Control, Materials behaviour in
Manufacturing, Surface Treatment, Machining Process, Condition Monitoring, Flexible Manufacturing Systems,
Computer Integrated Manufacturing, Non Traditional
Machining; Precision Gearing, Micro manufacturing, Friction Stir Wedding Manufacturing Methods in Precision
Engineering, Surface Technology, Active Noise Control
systems, Active Suspensions, Microprocessor Based System Design, Electrohydraulic Servo and Proportional
Controls, Pneumatic Systems, Robot-Kinematics,
Dynamics, Design and Controls, Multibody Dynamics, System Simulation, Microhydraulics, Mechatronics,
Microactuators, MEMS (iii) Thermal Engineering: Micro-miniature and small
cryogenic refrigerators, Simulation and optimization of
air separation cycles, Heat Transfer in Nano-fluids, Heat Transfer in Multi-Phase Flows, Flow Structure Interaction
in High Speed Turbo machinery Seals, Heat Transfer
Experiments in Phase Change Material Based Composite Heat Sinks, Two Phase Flow Convection Experiments
and Numerical Methods in Porous Media, Solid State
Hydrogen Storage, Sorption heating and cooling systems, Desiccant/evaporative cooling and air-conditioning,
Conjugate heat transfer in low and high speed flows,
Retrieval of geophysical parameters in the atmosphere in the microwave and infra red regions, Turbine rotor stator
interaction, Performance improvement of centrifugal
compressor by tip modification, subsonic cascade studies, Contrarotating turbines/compressors, Mixed folw
compressors, Turbine blade cooling, Secondary loss
reduction, Cavitation in hydraulic machines, Micro-scale Flows, Microfluidics, Free Surface flows, Acoustics of
Supersonic Jets, Active and Passive Control of High speed
flows, Combustion noise, Emissions, Combustion, Propulsion, CFD high speed reacting flows, I.C Engine
Combustion and Emissions, alternative fuels, CFD
applications in I.C Engines and Gas turbine combustion chambers, fluid flow, heat transfer and combustion
related to I.C Engines, advanced I.C Engine technologies
such as homogeneous charge, compression ignition, gasoline direct injection, engine management (Simulation
of engine processes and modeling – Combustion
diagnostics in engines Heat Transfer in Fuel Cells,
Fluidized Bed Combustion, Solar Power Systems,
Optimization of Solar Ics Systems. Nano fluidics.
Master’s degree in Mechanical Engineering, Aerospace
Engineering, Automobile Engineering, Automotive Engine Tech.,Bio-Medical Engineering, Chemical
Engineering, Computer Science, Electrical Engineering,
Electronics, Energy Engineering, Industrial Engineering, Instrumentation, Maintenance Management,
Metallurgical Engineering, Production/ Manufacturing Engineering, Agricultural Engineering and in related
areas depending on the research topics.
54
Code Department Fields of Specialization Minimum Qualification
MDOE01
Ocean Engineering
Ocean engineering : Wave-structure interaction, Soil-
structure interaction, Hydrodynamics of fixed, floating and
compliant offshore structures, Port and harbor structures,
Coastal structures, coastal processes and shore protection,
Subsea pipelines, risers and cables, Remote sensing and
ocean optics, Ocean renewable energy - wind, wave,
current and OTEC, Offshore structural engineering,- Ocean
and underwater acoustics, and Ocean environment.
Marine vehicles : Motion and stabilization, Maneuvering
and controllability, Resistance, powering and propulsion
systems - Design and surface development, Shipbuilding
materials, structure and vibrations, under water vehicles,
hydrodynamics and control, under water acoustics – under
water towed systems and marine CFD.
Master’s degree with good academic record and
exceptional merit in Aerospace Engineering, Civil Engineering, Marine Engineering, Mechanical
Engineering, Marine Structures, Naval Architecture,
Ocean Engineering Or any other appropriate engineering discipline Or M.Sc. in Physics, Mathematics, Statistics
or Oceanography.
MDOE02
Petroleum engineering: Reservoir engineering; Reservoir
Simulation; Analysis of seismic data and interpretation,
Artificial lift methods, Drilling engineering and drilling
fluids, Enhanced oil recovery, Flow assurance technologies,
Formation evaluation from well logging methods, Gas
hydrate studies, Hazards identification and risk management,
Petroleum geology and geophysical studies, Flow through
shale gas reservoirs, CBM reservoirs, fractured carbonate
reservoirs and CO2 sequestration.
Master’s degree with good academic record and
exceptional merit in Chemical Engineering, Civil
Engineering, Marine Engineering, Mechanical Engineering, Marine Structures, Naval Architecture,
Ocean Engineering, Petroleum Engineering Or any other appropriate engineering discipline OR M.Sc. in
Physics, Mathematics, Statistics, Oceanography,
Geology and Geophysics.
MDPH01 Physics
Applied Optics, Quantum Optics, Photonics and nonlinear
optics, Atomic and Molecular Physics, Complex fluids, Soft
Condensed Matter and Biological Physics, Low temperature
physics and superconductivity, Magnetism and Magnetic
materials, Semiconductor Physics, Photovoltaics, Dielectric
materials & Microwave Physics, Spintronix Multifunctional
materials. Thin film phenomena, Metal-oxide Thin films,
Nanostructured thin film and heterostructures, Low
Dimensional Materials, Carbon Nanotubes and Graphene,
Hydrogen Storage Materials, Dynamical systems, Statistical
Physics and Field Theory, Electronic structure of Solids and
Computational Material Science, Nonlinear Dynamics,
Quantum Chaos, Quantum Information, Particle Physics and
Experimental High Energy Physics, Gravity and Cosmology,
Theoretical High Energy Physics.
M.Sc/ M.Sc (Tech) in Physics, Applied Physics, Materials
Science/ M.Tech (Solid State Technology) / M.Tech. (Materials Science) M.Tech (fuctional Materials and Nano
Technology)or equivalent.
55
8. Indian Institute of Technology Roorkee, Roorkee 247 667 – RR
Minimum Educational Qualification:-
(a) Masters degree or equivalent in respective discipline with a minimum Cumulative Grade Point Average (CGPA) of 6.00 on a 10 point scale or equivalent
as determined by the Institute wherever letter grades are awarded; or 60% marks in aggregate (of all the years/semesters) where marks are awarded, for the GENERAL (UR) category.
(b) The admission eligibility requirements may be relaxed to 5.5 on a 10 point scale or equivalent, or to 55% marks to the SC/ST/PD candidates with Master’s
degree.
(c) Candidate supported by a sponsoring organization, the applicant having THREE years’ experience out of which at least ONE year experience with the
sponsoring agency at the time of submission of application for Ph.D. programme. This category refers to persons who are released from governmental or
educational institutions on study leave for a period of not less than three years for pursuing Ph.D. programme. (d) Candidate should submit sponsorship certificate and copy of appointment letter with a proof of regular/ permanent teacher.
Code Department Fields of Specialization Minimum Qualification
RRAH01
Alternate
Hydro Energy
Centre
Small Hydro Energy and other Renewable Energy Development. (i) B.Tech/ M.Tech or equivalent in Civil/
Electrical/ Mechanical Industrial/
Chemical/ Environmental/ Agricultural/
Computer/ Electronics Engineering.
(ii) M.Sc. in disciplines consistent with
research areas of the centre. RRAH02 Environmental management of Rivers and Lakes.
RRAR01 Architecture
and Planning
Architecture, Urban and rural planning, Built Environment including
urban design and landscape design, Building science and architecture,
Energy and architecture planning, Architectural Climatology, Ecology in
relation to architecture and planning, Art in relation to architecture.
Master’s degree in Architecture in any of
the specializations offered by recognized
Institutions of Architecture/ Master’s
degree in Building Science/ Technology
with a Bachelor’s degree in Architecture/
Master’s degree in Planning in any of the
specializations offered by the recognized
Institutions of Planning with a Bachelor’s
degree in either Architecture or Planning
(B.Planning) or Civil Engineering.
RRCH01 Chemical
Engineering
Transport Processes: Transport phenomena, Fluid dynamics,
Fluidization Engg., Packed beds, Slurry transport, Boiling and
condensation, Mixing phenomena, Gas-liquid-solid mass transfer.
Adsorption, Catalysis and Reaction Engg., Process Intensification,
Membrane separation process, Flow of emulsions, Heat integrated
Distillation.
Computer Aided Process Plant Design: Modeling and simulation of
Chemical processes. Analysis and optimization of chemical process
systems, Heat exchanger networks. Distillation columns. Catalytic
reactors and Monolithic converters, Design of chemical equipment,
Applied numerical methods, Dynamics and control of chemical
processes and equipment, PC-based instrumentation and control,
Process Integration, CFD.
Industrial Pollution Abatement: Environment pollution control
strategies, Modeling and simulation of pollution control systems.
Modeling of dispersion of air and water pollutants. Treatment
methodologies for air pollution and wastewater systems, Hazardous waste
management. Risk analysis & hazard management.
Energy Engineering: Design of energy efficient equipment and Energy
conservation in chemical process industries, Bioenergy and Biomass
energy systems.
Biochemical Engineering and Down Stream Processing: Biochemical
Engg. Design, Simulation and control of bioreactors, Biogasification,
Bioseparation.
(i) B.Tech./ M.Tech. or equivalent
degree in Chemical Engineering.
(ii) B.Tech./ M.Tech. or equivalent
degree in any branch of Engineering/
Chemical Technology and
interdisciplinary areas.
(iii) M.Sc. in disciplines consistent with
the research areas of the department.
56
Code Department Fields of Specialization Minimum Qualification
RRCY01 Chemistry
Analytical; Inorganic; Organic; Physical: Asymmetric synthesis;
Bioanalytical chemistry; Bioinorganic chemistry; Biophysical chemistry;
Chemical biology; Chemical kinetics; Coordination chemistry;
Development of low cost carbon alternatives for waste water
management; Electroanalytical chemistry; Electrochemical sensors and
chemical sensors; Electrochemistry; Electronic structure calculations and
molecular dynamics simulations; Enantiomeric resolution of
pharmaceutically important compounds; Enantioselective catalysis;
Environmental chemistry; Epoxidation of olefinic compounds; Evolution
and origin of life; Extraction chromatography; Extraction, separation and
recovery of metal ions; Heterogeneous catalysis; Inorganic biochemistry;
Kinetics and nanomaterials; Liquid chromatography; Macrocycles; Main
group chemistry; Metal speciation in environment; Metal-based drugs;
Materials modification; Nanomaterials for biomedical and environmental
applications; Neutron activation analysis; Organic electrochemistry;
Organic materials for OLED and photovoltaic applications; Organic
reaction mechanism; Organic synthesis of biological interest molecules
and new methodology in organic synthesis; Organometallics (Ru, Si and
Sn); Photochemistry; Protein sequencing; Size and shape effects of
nanomaterials on their physico-chemical properties; Supramolecular
chemistry; Synthesis of heterocyclic compounds; Synthetic
polymers/membranes/membrane electrodes; Syntheses of porphyrinoids
for material applications; Solid state and materials chemistry; Statistical
mechanics of polymers; Rational drug design; Multi component
synthesis; Microwave assisted organic synthesis; Theoretical chemistry.
(i) M.Sc. or equivalent degree in
Chemistry/ Physics.
(ii) M.Sc. in Bio-technology or M.Sc. in
Biochemistry.
RRCE01
Civil
Engineering
Environment Engineering - Environmental Pollution, Optimization of distribution network, water and wastewater quality assessment and t reatment a lternatives, Industrial wastewater treatment, air pollution modeling, abatement and control device, EIA & control water quality modeling, interdisciplinary problems.
(i) B.Tech/ M.Tech or equivalent degree
in Civil Engineering. Candidate
having an M.Tech Degree but not having a Bachelor’s degree in
Engineering must have studied
Mathematics at the Bachelors level. (ii) B.Tech/M.Tech degree in any branch
of Engineering may be considered for
research areas consistent with the
academic background and experience. (iii) M.Sc Degree in any branch of Science
or MCA (with mathematics at the
Bachelors level for both M.Sc and
MCA) may also be considered for research areas in Geomatics
Engineering.
RRCE02
Geotechnical Engineering – Behavior of shallow and deep foundations under static and dynamic loading, Problems of rock mechanics and Underground Space Technology, Static and Dynamic Soil Structure Interaction, Expansive soil, Reinforced earth, Ground Improvement Engineering.
RRCE03
Hydraulics Engineering - Sediment transport & Alluvial stream dynamics. Open channel flows, Wind tunnel studies on Turbulence, Boundary layer and Drag, Ground water hydrology, Ground water flow and transport modeling, Water resources, Surface hydrology, Computational Hydraulics, Irrigation Engineering, Environmental Hydraulics.
RRCE04
Geomatics Engineering - Surveying: Plane, Geodetic and GPS, Photogrammetry-close range, analytical and digital, Geodesy-Geometrical, Physical, Mathematical and Satellite, Remote Sensing-Optical and microwave, Hyperspectral, SAR interferometry, Digital image processing, AI soft computing Fuzzy theory, GIS, Web GIS Applications.
RRCE05
Structural Engineering - Performance Based Design of Concrete/Metal Structures, Risk and Reliability Analysis, Nonlinear Computational Mechanics, Nano-mechanics, Soft Computing and Structural Optimization, Strength and Deformation Characteristics of Reinforced Concrete/Masonry/Structural Steel, High Rise Building Systems, Behavior of Bridge Systems, Laminated Composites and Sandwiched Structures, Thin Walled Structures, Smart Structures, Steel Concrete Composites, Concrete Mechanics, Concrete Durability, Special Concretes, Sustainable Concrete, Recycled aggregate concrete Damage Assessment and Structural Health Monitoring, Retrofit and Rehabilitation of Structures, Structures Subject to Extreme Loads (Wind, Earthquake, Impact, Blast and Fire).
RRCE06
Transportation Engineering - Highway material characterization for pavements, Reinforced flexible pavements, modified binders, composite pavements, pavement management systems, low cost pavements, mixed traffic flow modeling and simulation, highway capacity, Environmental impact assessment, mass transportation systems analysis, Rural Urban and Regional Transport Planning, Road Traffic Safety, Intelligent Transport System, GIS applications.
57
Code Department Fields of Specialization Minimum Qualification
RRES01 Earth Sciences
Geology: EngineeringGeology; Environmental Geology; Geochemistry and Petrology; Geotechnical Investigation; Ore Geology; Petroleum Geology; Remote Sensing and GIS; Sedimentology; Stratigraphy and Paleontology; Structural Geology; Waste Disposal. Geophysics: Engineering Geophysics; Exploration Geophysics;
Geodynamics; Seismology; Solid Earth Geophysics; Mathematical
modelingand Inversion; Geoelectromagnetism.
M.Sc/ M.Sc./ M.Tech. degree in Geology/
Geophysics/ Applied Geology/ Applied
Geophysics/ Geological Technology/
Geophysical Technology/ Geosciences/
Applied Geosciences/ Petroleum
Geology/ Petroleum Geophysics.
RREQ01 Earthquake
Engineering
Structural Dynamics: Dynamic analysis and design of structures like
buildings, dams, bridges and nuclear power plants, Finite & element
methods, Static and dynamic nonlinear analysis, Constitutive modeling,
Computer aided analysis, Soil-Structure and fluid- structure interaction,
Seismic base isolation, Seismic risk analysis, Random vibration theory
and probabilistic design methods, Shake table and pseudo dynamic
testing of structure and structural components, System identification,
Structural response control/ Performance Based Design, Seismic
Vulnerability and Risk analysis.
Soil Dynamics: Analytical and experimental studies on dynamic soil
properties, Seismic analysis and design of foundations, Wave
propagation and ground response analysis, Liquefaction studies using
laboratory and field tests, numerical modeling. Nonlinear constitutive
models of soils, Finite element dynamic analysis of embankment dams,
Dynamic soil-structure interaction analysis, Pile and well foundations
for dynamic loads, Machine foundations, Model studies using
geotechnical centrifuge for static and dynamic loads, Dynamic earth
pressure and retaining walls, Soil improvement techniques, Reinforced
earth and geotextiles for seismic loads, Field exploration using SPT,
Wave propagation, Block vibration, Cross bore hole and SASW tests.
Engineering Seismology and Seismotectonics: Micro earthquake investigations, Estimation of earthquake source parameters,
Seismotectonic modeling, Attenuation characteristics, Strong motion seismology, Broadband seismology, Finite-difference method and study of local site effects, Numerical and empirical ground motion prediction, Estimation of response spectra and design spectra, Probabilistic and deterministic seismic hazard assessment, Vulnerability and Risk Assessment, Seismic microzonation, Remote sensing/GIS/SAR based studies, Pattern Recognition, Earthquake Early Warning Systems.
(i) B.Tech./ M.Tech. or equivalent degree in Civil Engineering/ Earthquake
Engineering/ any branch of
Engineering.
(ii) M.Sc./ M.Tech. in Geophysics/ Physics/ Mathematics/ Geology for
research areas in Engineering
Seismology and Seismotectonics.
RREE01 Electrical
Engineering
Power electronics, Electrical drives and their control, Electrical machines analysis and computer-aided design, Power Quality, Embedded Systems, Condition Monitoring of Rotating Electrical Machines, Power Systems Stability, State Estimation, Security, Reliability, Optimization, Expert Systems, Application of neural networks and Artificial Intelligence Techniques, Distribution System Automation, Relaying, Distribution system reforms and bench marking HV engineering, Automatic Generation Control, Restructured Power Systems, Measurement techniques, Smart and intelligent transducer, process instrumentation & control, Power system instrumentation, Applications of digital signal processing, AI & ANN Techniques in Instrumentation, Biomedical Instrumentation, Analysis and modeling of bioelectrical signals and systems, Medical Signals & Image Processing, Operations research, Reliability engg., Optimal scheduling, System modeling, Simulation and analysis, Model reduction techniques, Microprocessor and microcomputer based systems for measurement, Monitoring, operation and control, Robotics, Control and optimization.
(i) B.Tech./M.Tech or equivalent degree in Electrical Engineering.
(ii) B.Tech./M.Tech. or equivalent degree
in a branch of Engineering consistent
with the research areas as mentioned
by the Department from time to time.
(iii) M.Sc. in a discipline consistent with the research areas as mentioned by the
Department from time to time.
RREC01
Electronics and
Communication
Engineering
Communication Systems
(i) M.E./ M.Tech. in Microelectronics/
VLSI/ Microwaves/ Communication
Systems/ Control Systems/ Instrumentation/ Circuits & Systems
or equivalent.
(ii) B.E./ B.Tech in Electronics &
Communication/ Electrical
Engineering or equivalent. (iii) M.Sc. in Physics/ Instrumentation/
Electronic.
(iv) B.Tech. + M.Tech. in Computer
Science.
RREC02 RF & Microwave Engineering
RREC03 Microelectronics and VLSI
58
Code Department Fields of Specialization Minimum Qualification
RRCS01
Computer
Science and
Engineering
Computer Science and Engineering.
(i) M.Tech/ M.E. in Computer Science
and Engineering/ Information
Technology/ Software Engineering or equivalent.
(ii) M.Tech./ M.E. in Electrical
Engineering/ Electronics and Communications Engineering or
equivalent.
(iii) B.Tech./ B.E. in Computer Science and Engineering/ Information
Technology or equivalent.
RRDM01
Centre of
Excellence in
Disaster
Mitigation &
Management
Natural/Manmade Hazards and Impact Assessment.
Hazard Monitoring, Prediction & Microzonation.
Data Processing Techniques & Models.
M.Tech. (Civil, Mechanical & Industrial,
Chemical, Computer Science), M.Arch. &
M. Planning or equivalent.
OR
M. Tech in Geological Technology,
Geophysical Technology, Biotechnology
or equivalent.
OR
M.B.A. or M.C.A. in Computer Science or
M.Sc. in Physics, Geophysics, Geology,
Mathematics, Environmental Sciences
(with Maths in B.Sc.), M.Tech. Bio-
technology or equivalent.
RRHS01 Humanities and
Social Science English, Economics, Psychology and Sociology.
(i) M.A. or equivalent degree.
(ii) Master’s degree in Science/ Graduate
Degree in Engineering/ Technology with 60% marks (or equivalent
grade) may be considered for
research areas consistent with the academic background and special
interest.
RRHY01 Hydrology
Analysis of hydrological extremes, Stochastic hydrology, Reservoir
operation, System analysis of water resources, Conjunctive use,
Hydraulic and hydrologic routing, Hydrogeology Contaminant transport
through open channels and porous media, Surface and ground water
pollution assessment, Water quality modeling Remediation of aquatic
systems, Water and Wastewater Treatment.
(i) Master’s degree in Civil Engg./ Water Resources Development/ Hydrology.
(ii) Master’s degree in Agricultural
Engineering/ Environmental Engg./ Instrumentation/ Water use
Management.
(iii) M.Sc./ M.Tech. in Geology/ Geophysics/ Soil Science/ Forestry or
natural Resources/ Chemistry/
Meteorology/ Atmospheric Physics/ Mathematics/ Nuclear Physics &
Environmental Sciences.
(iv) M.Sc. Hydrology with Mathematics at bachelors’ level.
RRMG01 Management
Studies
International Marketing, Service Marketing, Marketing Management,
Strategic Management, Health Care Management, Managing Non Profit
Organizations, Supply Chain Management, Human Resources
Management, Organizational Behavior, Knowledge Management,
Financial Accountingand Management, Quality Management, Fuzzy
Mathematics, Nonlinear Dynamics and Chaos, Mathematics Finance,
Statistical Field Theory, Quantum Information Theory and Quantum
Computing, Optimization, General Management including Indian
Philosophy Vedic Values, Rural Management & Marketing, Education
Business Management, Management Teaching Management, Family
Owned Businesses, Bottom of the Pyramid Markets & Business
Opportunity Development.
(i) B.E./B.Tech. or equivalent, M.E./ M.Tech. or equivalent qualifications.
(ii) M.Sc./M.A./M.Com.
(iii) Master of Management/ M.B.A.
or equivalent.
59
Code Department Fields of Specialization Minimum Qualification
RRMA01 Mathematics
Elasticity and Vibration, Fracture Mechanics, Fluid Mechanics,
Computational Fluid Dynamics, Bio-Mathematics, Numerical Analysis,
Operations Research, reliability Theory, Control Computer
Applications, Image Processing, Computer Graphics, Summability
Theory, Approximation Theory, Statistics, Computerized Tomography,
Abstract Algebra, Applied Algebra, Cryptography, Complex Analysis,
Mathematical Modeling, Robotics & Control, Symbolic Computation,
Theory of Differential Equations, Special Functions.
(i) M.A./M.Sc./M.Tech. in Mathematics/
Applied Mathematics/ Industrial
Mathematics/ Statistics/ Operation Research/ Applied Operation
Research/ Mathematics and
Computing.
(ii) M. Stat or Equivalent.
RRME01
Mechanical and
Industrial
Engineering
Machine Design Engineering: Machine Design: Computational
Mechanics, Computer Aided Design, Experimental Stress Analysis,
Fracture Mechanics, Noise Control and Vibrations, Robotics and Control,
Solid Mechanics, Tribology, Rotor Bearing Dynamics, Vehicle
Dynamics. Machine Diagnostics, Machine Dynamics, Instrumentation &
Control, Machanics of Composites, Bio-Mechanics, MEMS/NEMS,
Composite and Smart Structures.
(i) B.Tech./ M.Tech. degree or
equivalent degree in Mechanical/ Industrial/ Production Engineering.
(ii) B.Tech./ M.Tech.degree in
Aerospace/ Chemical/ Civil/ Electrical/ Metallurgical Engineering
may be considered for research areas
consistent with the academic background and special interests.
RRME02
Production and Industrial Engineering Systems: Computer Aided
Process Planning, Computer Aided Manufacturing, Manufacturing
Systems, Metal Casting, Machine Tools and Metal Cutting, Product
Design & Development, Unconventional Machining Processes,
Advanced Manufacturing, Supply Chain Management, Quality and
Reliability Engineering, Processing of Composites, Surface
Engineering, ARC Stability Analysis, Design of Weld Joints, Welding
Metallurgy, Fracture Mechanics of Weld Joints, Weld Surfacing,
Thermal Spraying.
RRME03
Thermal Engineering: Experimental Fluid Mechanics, Micro & Nano
Fluidics, Bio Fluidics, Fuel Cell, Combustion and IC Engines,
Computational Fluid Dynamics, Energy Systems, Heat Transfer, Thermal
Contact Couductance, Refrigeration and Air-Conditioning, Solar Energy,
Turbo-Machines, Design of Thermal System, Two-Phase Flow and Heat
Transfer Fire Dynamics Erosion Wear.
RRPH01 Physics
Atmospheric Physics, Atomic and Molecular, Physics, Fibre Optics and
Photonics, Laser Physics, Condensed Matter Physics, Nuclear Physics,
Thin Film Devices, High Energy and Particle Physics.
(i) M.Sc. in Physics/ Applied Physics.
(ii) M.Sc. in Chemistry/ Mathematics/ Biophysics/ Geophysics/ Computer Science, Provided Physics was a subject at B.Sc. level.
(iii) B.Tech or equivalent in Electrical/
Electronics/ Chemical/ Metallurgical/ Engineering Physics.
Candidates at Category (ii) and (iii) may
be considered for research area
consistent with the academic background and special interests.
RRNT01 Centre of
Nanotechnology
Synthesis of Nanowires/Nanocolloids/Quantum Dots, Nanocomposites
& their coatings, Nanobiotechnology, Nanosurface Engineering,
Modelling & Simulation, Thin Films & Nanostructures, Photochemistry
& Photophysics of Nanomaterials.
(i) B.E./ B.Tech or M.E./ M.Tech. in
Metallurgy/ Chemical/ Polymer/
Mechanical/ Biotechnology/ Physics/
Chemistry/ Electronics/ Electrical/
Civil or equivalent. (ii) M.Sc/M.S.(Science/ Engineering). (iii) B. Pharma /M. Pharma.
60
Code Department Fields of Specialization Minimum Qualification
RRMT01
Metallurgical
and Materials
Engineering
Development of Ferrous and Non ferrous Materials, Solidification and
P/M Processing of Materials, Mechanical Processing of Materials, Direct
reduction process, Aqueous and hot Corrosion, Nano materials and
Composites. Tribology of materials, Advanced Welding Technologies
and joining of dissimilar materials, Adhesive joining, Fatigue and fracture
of materials, Electro Ceramics and Structural Ceramics, Energy Storage
Materials, Surface modification and Coatings, Structure property
correlation, Polymer technologies etc.
B.Tech/ M.Tech. or equivalent, related to
following disciplines: Metallurgical
Engineering, Materials Engineering,
Nanotechnology, Engineering Physics,
Engineering Chemistry, Ceramics,
Polymers, Corrosion, Mechanical and
Production & Industrial Engineering,
Chemical Engineering and
Electrochemical Engineering. OR
1-M.Sc. degree in Physics, Chemistry,
Materials Science. 2-Candidates with a
M.Sc. degree, Mathematics as a subject at
B.Sc. degree level is an essential
requirement.
Note: Candidate having a degree in
Industrial Engineering only shall not be
eligible for admission to Ph.D.
programme in the Deptt. of Metallurgical
and Materials Engineering.
RRWR01
Water
Resources
Development
&
Management
Water Resources Planning, Design, Development and Management (Hydropower, Water Supply, Flood, Control, Irrigation), Surface and Ground Water Hydrology, Environmental Impact Assessment, Water Quality Modeling, Hydraulic and Hydrologic Design Modeling, River Engineering, System Analysis, Interbasin Transfer, Basin Planning and Development, Irrigation Water Management, Agricultural Crop Planning, Natural Resources Management using Remote Sensing and GIS.
(i) Water Resources Dvelopment B.E./ B.Tech./ M.E./ M.Tech or equivalent degree in Civil, Electrical, Mechanical and Agricultural Engineering.
(ii)Irrigation Water Management Master’s
Degree in Agricultural Sciences/ Social
Sciences/ Chemical Engineering/ Biological Sciences/ Environmental
Sciences/ Engineering/ Natural Sciences with at least one paper of
Mathematics at the graduate level.
RRBT01 Biotechnology
Molecular Biophysics, Genetics, Microbiology & Microbial biotechnology, Molecular biology, & Proteomics, Endocrinology, Environmental biotechnology, Plant biotechnology, Biochemical Engineering, Biochemistry protein crystallography & Bioinformatics, Virology.
(i) Master’s degree in any disciplines
of Science. (ii) Bachelor’s/ Master’s degree in
medical sciences, Engineering,
Pharmacy, Veterinary and related disciplines.
(iii) MD/MS in Ayurveda.
RRPP01
Pulp & Paper
Engineering
(Saharanpur
Campus)
Pulp Processing, Non-wood fiber pulping, Secondary fiber pulping, Recycling, Paper Making, Paper Properties, Printing, Energy Management, Chemical Recovery, Environmental Science & Engineering, Industrial Chemistry, Pollution free bleaching, Modelling of Process Systems, Wood Chemistry, Electronics, Instrumentation and communication, Biotechnology, Nanotechnology.
(i) M.Sc./ M.S.(Science/ Engineering)
(ii) B.E./B.Tech./B.Pharm/M.E./M.Tech/
M.Pharm. in any branch of engineering
or equivalent.
RRPP02
Polymer and
Process
Engineering
(Saharanpur
Campus)
Polymer Engineering, Biopolymers, Nanopolymer, Functional Polymers, processing Engineering, Tissue Engineering, Financial Management, Modelling & Simulation Performance Coatings, Process Optimization organic Metallic and Hybrid Polymer.
(i) M.Sc./ M.S./ MBA (Science/ Engg./
Management)
(ii) B.E. / B.Tech / B.Pharm / M.E. /
M.Tech. / M. Pharm in any branch of
engineering or equivalent.
RRPP03
Applied Science
and Engineering
(Saharanpur
Campus)
Degradation of materials, Microbial Corrosion, Coating, Nanomaterials, Nanoscience, Energy Storage devices, Li-battery, Super Capacitor and Fuel Cell, Fuel Cells, Theoretical Physics, Superconductivity, Nanomagnets, Materials Chemistry, Applied Mathematics, Industrial Mathematics, Optimization, Cloud Computing, English, Humanities.
(i) M.Sc./ M.S./ M.A. (Science/
Engineering / Humanities)
(ii) B.E./ B.Tech/ M.E./ M.Tech. in any
branch of engineering or equivalent.
RRTS01
Centre for Transportation
Systems (CTRANS)
Urban Transportation Policy and Research, Environmental Analysis of Transportation Systems, GPS and GIS Applications in Transportation Systems, Optimization of Public Transport Operations, Economic Appraisal of Transport Systems, Multiplier Effect, Project Management, and Inter modal Transportation.
M.Tech/ M.Arch/M.Planning/ M.Des./
MBA or equivalent degree in Civil/
Mechanical/ Industrial/ Production/
Chemical/ Computer Science &
Engineering/ Infrastructure Systems/
Biotechnology/ Architecture/ Planning/
Urban Engg./ Business Administration.
RRIC01 Institute
Instrumentation Centre
Centre houses modern facilities for advanced materials processing and characterization. The facilities include well-established Nanoscience Lab., which consists of state of the art nanomaterials synthesis facilities (Physical vapour deposition (PVD) Technique for Nano-materials synthesis).
M.Sc./M.Tech. in Physics, Applied
Physics, Material Science, Chemistry,
Electronics & Nanotechnology.
61
9. Indian Institute of Technology, Banaras Hindu University, Varanasi 221 005 – VN
Minimum eligibility for Ph.D. Programme in Met. Engineering. Is Master’s degree in Metallurgical or an equivalent branch of Engineering with 55% marks
(or equivalent grade point average) or in Chemistry, or Physics with 60% marks for Ph.D. in Mining Engineering with 55% marks (or equivalent grade point
average) or M.Sc. in Geology with 60% marks.
a) Ph.D. in Engineering
Applicants with master’s degree in engineering in the discipline concerned or in an allied discipline/area must have a minimum of 60% marks or 6.0 CPI (on a 10.0 point scale) at the master’s degree level.
b) Ph.D. in Pharmacy
Applicants with master’s degree in Pharmacy in the discipline concerned or in an allied discipline/area must have a minimum of 60% marks or 6.0 CPI (on a
10.0 point scale) at the master’s degree level.
c) Ph.D in Interdisciplinary Programmes
i) Ph.D. in Systems Engineering Applicants with a bachelor’s and master’s degree in any branch of Engineering must have a minimum of 60% marks or
6.0 CPI (on a 10.0 point scale) at the master’s degree level.
ii) Ph.D. in Industrial Management.
Applicants with bachelor’s degree in any branch of engineering and master’s degree in any branch of engineering/ management must have a minimum of
60% or 6.0 CPI (on a 10.0 point scale) at the master’s degree level.
iii) Ph.D. in Bio-chemical Engineering/Bio-medical Engineering/Materials Science and Technology
Applicants with master’s degree in the discipline concerned or in an allied discipline must have a minimum of 60% or 6.0 CPI (on a 10.0 point scale) at
the master’s degree level.
Code Department Fields of Specialization Minimum Qualification
VNMT01 Metallurgical Engineering
Deformation and Fracture, Phase Stability, Phase
Transformations, Rapid Solidification Processing
Including Metallic Glasses Nano-materials Metallurgical Thermodynamics and Kinetics, Corrosion and
Environmental Stability, Metal Casting Technology and
Tribological Studies, Non-Ferrous Extractive Metallurgy, Ferrous Extractive Metallurgy, Process
Simulation Studies, Agglomeration of Ore Fines and
Utilization of Metallurgical Wastes. Extractive Metallurgy, Alloy Technology, Metals and Materials
Processing.
Master Degree in Metallurgical Engineering.
VNMI01 Mining Engineering
Rock Mechanics & Ground Control, Mine Environment,
Mine Planning & Design, Mining Machinery, Numerical
Modeling of Mining Structures.
Master Degree in Mining Engineering.
VNCH01 Chemical Engineering Energy, Environment, Transfer Processes.
Master Degree in Chemical Engineering, Chemistry, Bio Chemistry, Environmental Sciences, Bio Technology and Industrial Chemistry.
VNCE01 Civil Engineering
Structural Engineering, Environmental Engineering, Geotechnical Engineering, Hydraulics & Water Resource Engineering, Transportation Engineering, Geoinformatics Engineering, Engineering Geology.
Master Degree in Civil Engineering, Applied Mechanics, Chemical Engineering and
Technology, Environmental Engg., Aerospace
Engineering, Earth quake Engineering, Naval Architecture, Mechanical Engineering,
Computer Science and Engineering Or M. Sc. In
Environmental Science, Geophysics and Geology, Geoinformatics, Geomatics, Remote
Sensing and GIS.
VNEE01
Electrical Engineering
Electrical Machines and Drives, Power Systems, Control Systems and Power Electronics.
Master Degree in Electrical Engineering.
VNEE02 Systems Engineering (Inter disciplinary). Master Degree in Electrical/ Electronics/ Computer Engineering.
VNME01
Mechanical Engineering
Machine Design, Thermal & Fluids, Production Engineering.
Master Degree in Mechanical Engineering.
VNME02 Industrial Management. Master Degree in any branch of Engineering.
VNEC01 Electronics Engineering Microwave Engineering, Digital Techniques & Instrumentation, Microelectronics, & Communication Systems Engineering.
Master Degree in Electronics or Electrical
Engineering.
VNCS01 Computer Science and
Engineering
Artificial Intelligence, Image Processing, Machine
Learning, Biometrics, Data Mining, Software
Engineering, Parallel Computing.
Master Degree in Computer Science and
Engineering.
VNMA01 Mathematical Sciences
Bio-mechanics, Digital Image Processing, Elasticity,
Fluid Dynamics, Free boundary problems, Functional
Analysis, Fuzzy Mathematics, Mathematical Modelling,
Operations Research, Pseudo differential operators,
Theory of Rings and Modules, Wavelets and
distributions.
Master Degree in Mathematics.
62
Code Department Fields of Specialization Minimum Qualification
VNBM01 Biomedical Engineering.
Artificial Intelligence, Bioinstrumentation,
Biomaterials, Biomedical Signal and Image Processing,
Biomechanics, Composites, Mathematical Modelling of
Biological Systems, Neuro Physiology, Stress and
Patho-Physiology, Tissue Engineering and
Biomicrofludics, Molecular Biology and
Nanotechnology.
Master Degree in Bio Engineering/ Electrical
Engineering/ Electronics Engineering/
Instrumentation Engineering/ Mechanical
Engineering/ Computer Engineering/ Material
Science and Technology/ Chemical
Engineering/ Biotechnology or M.Sc. In
Physics/ Chemistry/ Polymer Sciences/
Biochemistry.
VNBC01 Biochemical Engineering To be announced at the time of Interview.
Masters degree in Biochemistry/ Bio-
Technology/ Biochemical Engineering/
Pharmacy/ Microbiology/ Environmental
Science or in Chemistry with specialization in
Biochemistry or Physical Chemistry.
VNMS01 Material Science &
Technology Material Science & Technology related current areas.
Master’s Degree in Chemical Sciences, Material
Science and Physical Sciences, Ceramic/
Chemical Engineering/ Electrical/ Civil/
Electronics/ Polymer/ Plastic Technology/
Materials Technology/ Nanotechnology/
Metallurgical Engineering/ Dentistry/
Orthopedics / ENT/ Rasshastra.
VNPH01 Physics
Solar Physics, Space & Planetary Physics,
Astrophysics, Condensed Matter Physics (Theory &
Experiment), Biophysics, Fiber optics, Photonics,
Remote Sensing, Materials Science, Quantum
information, Renewable Energy.
M.Sc./ M.Tech. in Applied Physics,
Engineering Physics, Bio-Physics, Electronics
Engg., Materials Science, Ceramic Engg.,
Metallurgical Engg., Electrical Engg., Bio-
Informatics, Geomatics and Geoinformatics,
Computer Science, Computer Engg.,
Mechanical Engg., Mathematics, Chemistry,
Remote Sensing, Astrophysics, Space Physics,
Applied Optics, Atmospheric Physics, Fibre
Optics & Photonics.
VNCY01 Chemistry
Synthetic Chemistry, Environmental Chemistry, Surface
Chemistry, Computational Chemistry.
M.Sc/M.Tech. in Chemistry/ Industrial
Chemistry/ Applied Chemistry/ Biochemistry/
Biotechnology/Medicinal Chemistry/Materials
Science & Technology/Environmental Science
and Nano Technology with chemistry as a
subject at Bachelor Level.
VNCM01 Ceramic Engineering
Bio-Ceramics, Ceramic/Metal/Polymer matrix
composites, Electro Ceramics, Glass and Glass
Ceramics, Refractories, Advanced Ceramics, Nano
Technology, Cement & Concrete Technology, Energy
Materials.
Bachelors / Master’s degree in any branch of
Engineering. Master’s degree in Chemistry/
Applied Chemistry/ Physics/ Applied Physics/
Geology or Geophysics (with Mathematics as a
subject at Bachelor’s Degree level).
Master’s degree in Modern Medicine / Indian
Medicine (for the areas related to Bioceramics)
B.Tech./M.Tech in Ceramic Engineering/with
some background of ceramics.
63
10. Alagappa Chettiar Government College of Engineering and Technology Karaikudi, Tamilnadu - 630 003 – AC
Code Department Fields of Specialization Minimum Qualification
ACCE01 Civil Engineering
Structural Engineering, Transportation Engineering,
Environmental Engineering, Biological Treatment of
waste water, Air-Pollution monitoring and control,
Physical-Chemical Treatment of waste water.
M.Tech/ ME in Civil Engineering.
ACEE01 Electrical and Electronics
Engineering
Power Electronics & Drives, Power Systems, Renewable Energy, Fractional Order Systems, Communication,
Image Processing, Computer Networks, Optimization
Techniques.
M.E/ M.Tech in Electrical & Electronics
Engineering, Electronics & Instrumentation.
ACEE02 Optical Communication, Non linear optics, Visible light
communication.
M.Tech/ M.E. in Electronics & Communication
Engineering.
ACME01 Mechanical Engineering
Material Science, Composites, Robotics, Advanced
Machining, CAD, Surface Engineering, Machining Optimization, Solar Power Engineering, Green Engineering, Corrosion Engineering, Laser –welding.
M.Tech in Mechanical/ Automobile/ Industrial
& Production Engineering.
11. Anna University, Chennai 600 025 – AU
A minimum of 55% of marks/CGPA of 5.5 on a 10 point scale in Master’s degree in Engineering/Technology. In case of SC/ST candidates, 50% marks or
CGPA of 5.0 on a 10 point scale in the respective Master’s degree. Candidates will be selected based on written test.
Code Depatment Fields of Specialization
Alagappa College of Technology Campus (A. C. Tech. Campus), Anna University, Guindy, Chennai- 25
AUCH01 Chemical Engineering Petroleum Refining and Petrochemicals, Ceramic Technology, Chemical Engineering, Polymer Science
and Engineering.
AULT01 Leather Technology Leather technology, Footwear Science & Engineering.
AUTX01 Textile Technology Textile Technology, Apparel Technology.
AUBT01 Bio-Technology Biotechnology, Computational Biology, Nano Science and Technology, Food Technology, Bio-
Pharmaceutical Technology.
College of Engineering, Guindy, Chennai- 25
AUCE01 Civil Engineering
Environmental Engineering, Structural Engineering, Hydrology and Water Resources Engineering,
Construction Engineering and Management, Irrigation Water Management, Urban Engineering, Remote
Sensing, Soil Mechanics and Foundation Engineering, Integrated Water Resources Management,
Transportation Engineering, Environmental Management, Environmental Science, Remote Sensing and
Geomatics.
AUEE01 Electrical Engineering
Power Systems Engineering, Control and Instrumentation, Power Electronics and Drives, High Voltage
Engineering, Electronics Engineering, Instrumentation Engineering, Power Engineering and Management,
Embedded System Technologies.
AUIC01
Information &
Communication
Engineering
Optical Communication, Medical Electronics, Applied Electronics, Communication Systems, Laser and
Electro Optical Engineering, Computer Science & Engineering, Software Engineering, Bio Medical
Engineering, System Engineering and Operation Research, Computer Science Engineering(Specialization
in Big Data and Analytics), Multimedia Technology, Information Technology, Master of Computer
Application.
AUME01 Mechanical Engineering
Internal Combustion Engineering, Refrigeration and Air-conditioning, Energy Engineering, Engineering
Design, CAD/CAM, Product Design and Development, Mechatronics, Automobile Engineering, CAD,
Solar Energy, Manufacturing Systems Management, Printing and Packing Technology, Computer
Integrated Manufacturing, Industrial Engineering, Quality Engineering and Management.
School of Architecture and Planning, Guindy, Chennai - 25
AUAR01 Architecture and
Planning Architecture, Digital, Landscape, Plan.
Madras Institute of Technology Campus, Chennai - 44
AUAE01 Aerospace Engineering Aircraft Structures, Aerodynamics, Propulsion.
AUAU01 Automobile Engineering Alternate fuels, IC combustion, Simulation of Engine, Vehicle Dynamics, Automotive Chassis.
AUEC01 Electronics Engineering Networking, Communication, VLSI, Embedded, Electronics, Avionics, Signal and Image Processing.
AUIN01 Instrumentation
Engineering
Process Modeling and Control, Fault diagnosis, VLSI, Biomedical Instrumentation, Transducers and
Measurement.
AUPT01 Production Technology Manufacturing Processes, Metrology, Mechatronics, Metallurgy Manufacturing Management, Robotics,
Automation, Production.
64
12. Basaveshwar Engineering College, Bagalkot 587 103 – BA
Code Department Fields of Specialization Minimum Qualification
BACE01 Civil Engineering Structural Engineering, Geotechnical Engineering, Environmental Engineering, Hydraulics and Water Resources
Engineering M.E./ M.Tech. in Civil Engineering.
BAME01 Mechanical Engineering Material Science & Metallurgy, Deign and Dynamics, Thermal Engineering & Tribology.
M.Tech in Mechanical/ Automobile/ Industrial & Production Engineering.
BAEE01 Electrical Engineering
Power Systems, Renewable Energy Systems, Smart Grid/
Micro Grids, Energy Conservation, Energy Audit, Demand Side Management, Power Electronics & Drives, Signal Processing.
M.E/ M.Tech in Electrical & Electronics Engg. Electronics & Communication
Engineering Electronics and Instru-
mentation.
BAEC01 Electronics &
Communication Engineering
Speech Processing, MEMS, Computer Communication & Networking.
M.E./ M.Tech in E&E/ E&C/ Telecommunications/ Instrumentation &
Technology.
BACS01 Computer Science &
Engineering Image Processing, Wireless Networks Pattern recognition. M.Tech/ M.E CSE, CN, CE, & ECE.
13. BMS College of Engineering, Bangaluru 560 019 – BS
Code Department Fields of Specialization Minimum Qualification
BSCE01 Civil Engineering
Structural masonry, New generation concrete, Alternative
building materials and technology, Remote sensing and GIS,
Water resource management, Pavement material and evaluation, Environmental Engineering, Fracture behavior of concrete, Soil
stabilization, Ground improvement techniques
M. Tech.
BSEE01 Electrical Engineering
Power engineering, power distribution, Power electronics and
drives. Material research on semiconductor devices, H.V
Engineering & Liquid Insulation Diagnostics., Smart Sensors &
Nanotechnology, Power Electronics & Renewable Energy and
solar cells.
M. Tech.
BSME01 Mechanical Engineering
Structural dynamics, Tribology, Solid mechanics, Composite materials, Structural health monitoring, Smart materials and
structures, Optimization, Nontraditional machining, Design
engineering, Powder Metallurgy, Contact Mechanics, Fretting Mechanics, Fatigue of Materials & FEM, Conventional /
Unconventional Machining, Advanced Materials Heat Transfer,
Heat Pipes, Fluid Mechanics, Maintenance Engineering, Robotics, Materials and Mathematical Modelling.
M. Tech.
BSIE01 Industrial Engineering
& Management ERP and Ergonomics, Quality and reliability, Maintenance engineering, Production process, Facility planning.
M. Tech.
BSEC01
Electronic &
Communication Engineering
Nonlinear control strategies, Embedded system Design, signal
processing, Power electronics, Image Processing and pattern
classification. Low power electronics, Wireless Communication,
Wireless Sensor Networks, Synthesis and characterization of semiconductor alloys for various applications, Automotive
Electronics.
M. Tech.
14. Coimbatore Institute of Technology, Coimbatore 641 014 – CC (Addendum)
Code Department Fields of Specialization Minimum Qualification
CCCE01 Civil Engineering Structural Engineering, Geotechnical Engineering, Water
Resources Engineering, Environmental Engineering, Remote
Sensing & GIS, Construction Management.
M.E./M.Tech. degree in relevant fields
of Engineering
CCME01 Mechanical Engineering
Welding Technology, Advanced Manufacturing Technology,
Heat Power Engineering, Nano materials, Energy Engineering, Computational Fluid Dynamics.
CCEE01 Electrical & Electronics
Engineering Power Systems, Power Electronics & Drives, Control Systems,
Embedded Systems, Analog and Digital Electronics.
CCCH01 Chemical Engineering Chemical Engineering, Process Control, Nano Technology,
Membrane Technology, Environmental Engineering, Bio Technology.
65
15. College of Engineering Trivandrum, Engineering College P.O., Thiruvananthapuram 695 016 – CT
Code Department Fields of Specialization Minimum Qualification
CTCE01 Civil Engineering
Geotechnical Engineering, Geoenvironmental engineering,
Geosynthetics, Soil structure interaction, Soil dynamics and
Ground Improvement. Structural Engineering, Composites,
Steel Concrete Composites, Special Concrete, Engineered
Cementacious Concrete, Functionally Graded Materials,
Seismic Studies and Metal structures, Hydraulics Engineering,
Costal Zone Management, Flood Management and Water
Management, Climate and Flow, Modelling, Experimental
Hydraulics and Harbour Engineering ,Transportation
Engineering, Urban Transportation Planning, Traffic and
Pavement Engineering, Sustainable, Transportation
Environmental Engineering, Waste Management, Landfill
Liners, Air and Water Quality, Environmental Microbiology,,
Environmental Biotechnology and Environmental
Biochemistry.
M.Tech./ M.E. degree in relevant field
of Engineering with a minimum CGPA
of 6.5 for general candidates and 5.5 for
SC/ST. The institute is affiliated to Dr
APJ Abdul Kalam Technological
University. Visit the university’s web
site (www.ktu.edu.in) for detailed
information on qualification criteria.
CTME01 Mechanical Engineering
Fluid Mechanics, Microfluidics, Heat Transfer,
Thermodynamics and Combustion, Computational Fluid
Dynamics, Supersonic Flows, Thermal Engineering,
Refrigeration and Air conditioning, Energy Management,
Alternate Energy Sources and Fuels, Machine Dynamics,
Condition Monitoring, Vibration, Fluid Structure Interaction,
Smart/Intelligent Structures, Vibration, Machine Design, Non-
linear FEM, System Modeling and Simulation, System
Dynamics, Optimization Techniques, Operations Management,
Supply Chain Management, Financial Engineering,
Ergonomics, Data Analytics, Tribology, Wear and Lubrication.
Advanced Manufacturing & Automation.
CTEE01 Electrical Engineering
Power Systems, Electrical Machines, Control Systems,
Guidance & Navigational Control, Power Electronics & Drives.
E-mobility, Robotics & Automation, Smart Grid, Micro-grid,
Renewable Energy Systems.
CTEC01
Electronics &
Communication
Engineering
Radio Frequency Engineering, Signal Processing, Image
Processing, Computer Vision, Optical Communication,
Computer Communication, Wireless Communication, Sensor
networks, VLSI Circuits, Embedded Systems, MEMS,
Instrumentation Engineering, Motor Drives, Pattern
Recognition, Machine learning, Deep Learning, IoT, Network
Security.
16. College of Engineering, Pune 411 005 – CP*
Code Department Fields of Specialization Minimum Qualification
CPCE01 Civil Engineering
Construction Management, Geotechnical Engineering, Soil
Liquefaction, Pavement Engineering, Ground Improvement,
Laboratory and Field, Practices in Foundation Engineering, Soil,
Structure Interaction; Structural Engineering, Water Resources
Engineering, Town and Country Planning.
Master’s degree in Civil Construction
Management, Geotechnical
Engineering, Structural Engineering,
Water Resources Engineering, Town
and Country Planning.
CPME01 Mechanical Engineering
Heat Transfer, Fluid Mechanics, I C Engines, Solar Energy,
Automobile Technology, Refrigeration, air conditioning, energy
management.Vibration and Acoustics, Tribology, Industrial
Engineering, Micro Machining.
Master degree in Mechanical/
Automobile/ Industrial/ Production
Engineering & allied specializations.
66
Code Department Fields of Specialization Minimum Qualification
CPPE01 Production Engineering
Non-Traditional Machining, Machining, Machine Tools and
Metal Cutting, Micro Machining, Casting, Welding and Forming
Processes, Tool Design, Rapid Prototyping and Tooling,
Modeling and Simulation of Manufacturing Processes,
Manufacturing Automation and Control, Ergonomics, Intelligent
Manufacturing, Cellular Manufacturing, additive manufacturing,
Dimensional Tolerance Technology, CAD/CAM, Finite Element
Analysis, Features Based Modeling, Computer Aided Process
Planning, Intelligent Product Design and Manufacturing CIMS,
Product Lifecycle Management, Quality Engineering, Planning,
Scheduling, Queuing, Management of Operations, Advanced
Manufacturing, Materials Processing and Heat Treatment, Metal
Forming, Structural Ceramics Composite Materials, Metal Matrix
Composites, Tribology of Advanced materials, Surface
Engineering, Magnetic Materials, Electromagnetic Materials and
Processing, Ferroelectric Ceramics, Electronics Materials,
System Reliability Assessment, Maintenance Management,
Machine Diagnostic and Condition Monitoring, Reliability and
Design, Reliability Simulation, Machinery Fault Diagnosis,
Terotechnology, Maintenance Engineering & Management, Risk
and Safety Assessment, Software Reliability, Enterprise Resource
Planning (ERP).
Master degree in Production/
Mechanical/ Auto mobile/ Industrial
Engineering and allied specializations.
CPEE01 Electrical Engineering
Electrical Machines:- Permanent Magnet Machines, Linear
Machines and Special Purpose Machines.
Power Electronics:- Topologies, Applications to Drives and
Power System (FACTS/HVDC), Power Quality and Super
Capacitors.
Control System:- Sliding Mode Control, Robust Control and
Modeling of Large System.
Power System:- Computation, Economics, Numerical
Protection, WAMs, PMUs Technology, SMART Grid,
Micro-Grid and Transients Studies.
Master’s degree in Electrical
Engineering.
CPEC01
Electronic &
Telecommunication
Engineering
Image Processing and Pattern Recognition, Machine Vision
Systems, Next Generation Networks, VLSI Architecture,
Development for Signal Processing and Communication
Applications, Information Security, Using Water Marking,
Image Analysis for Medical/Document/ Agro Based Products/
Microstructure/ Metallographic/ Satellite Images, Speech and
Audio Processing, Synthesis and Coding.
Master’s degree in Electronics/
Electronics & Telecommunication
Engineering.
CPCS01 Computer Engineering
Computer Networks, Information Security, Formal Methods
and Verification, Bioinformatics, Machine Learning,
Distributed Computing, Biometric Watermarking, Parallel
Computing, Data Mining, Cloud Computing, IT enabled
Business Transformations and Software Engineering.
Master’s degree in Computer
Engineering/ Information Technology/
Computer Science & Engineering/ any
other Specialization of Computer
Science & Engineering or Information
Technology.
CPIN01 Instrumentation and
Control
Process Control, Biomedical Instrumentation, Control System
Power Converters, Agricultural Instrumentation, Sensors/
Transducers, Clinical Diagnosis/ Predictions.
Master’s degree in Instrumentation/
Electrical/ Biomedical/ Electronics/
Computer/ Chemical Engg.
CPMT01 Metallurgy & Materials
Science
Physical Metallurgy, Process Metallurgy, Casting, Welding,
Metal Working, Corrosion and Surface Modification, Heat
Treatment, Cryogenic Treatment, Power Metallurgy, Ceramics,
Polymers, Composite Materials; MMC, Nano Composites,
Polymer Based Composites, Iron and Steel Making. Laser
Materials Processing, Laser Assisted 3D Printing,
joining, deformation and machining' in the Metallurgy part.
Master’s degree in Metallurgy,
Materials Science, Mechanical
Production Engineering.
*The College of Engineering Pune is affiliated to Pune University. As per the university rules, the candidate seeking admission to Ph.D course has to qualify
in the entrance examination of Paper-1 and Paper-II of the University of Pune and then he/she will be eligible for selection through interview for Ph.D
admission. However the candidate is exempted from qualifying entrance examination in Paper-I and Paper-II of Pune University if the candidate fulfills the
following criteria. (a) Candidates having a GATE score
(b) Candidates who are having minimum five years of approved teaching experience
67
17. College of Technology & Engineering, Maharana Pratap University of Agriculture and Technology, Udaipur
- 313 001, Rajasthan – CA
Code Department Fields of Specialization Minimum Qualification
CAEE01 Electrical Engineering
Efficient power converters & drives
Deregulation of Power system
Solar & Wind Power converters
M.E./ M.Tech. (Electrical Engg).
CAFM01 Farm Machinery &
Power Engineering
Farm Machinery & Power
Ergonomics Tillage & Traction
ME / M.Tech (Ag. Engg.) in FMP/
REE.
CAPF01 Processing & Food
Engineering
Drying & Dehydration of Horticultural Produce
Value addition of Agricultural Produce
Spice Processing
M.E./ M.Tech. (Ag. Engg.) in PFE
CASW01 Soil & Water
Engineering
Soil Water Engineering & Watershed Management
Irrigation Water Management Command Area Studies
ME/ M.Tech. (Ag. Engg.) in SWC/
IWM; ME/ M.Tech. in Hydraulics/
Irrigation/ Aquatic/ Aquaculture
Enggineering.
CARE01 Renewable Energy
Engineering
Solar Energy
Bio-energy Solid Waste Management
ME/ M.Tech (Ag. Engg.) in
FMP/REE/PFE; ME/ M.Tech. in
Electrical/ Electronics/ Mech./
Chemical/ Civil.
18. Delhi Technological University, Delhi – DD
Code Department Fields of Specialization Minimum Qualification
DDCE01 Civil Engineering
Structural Engineering, Concrete Technology, Cementitious
Materials, Prestressed Concrete, Tall Structures and Rehabilitation
of Structures, Geotechnical Engineering, Rock Mechanics, Soil
Mechanics, Geo Environment Engineering, Water Resources
Engineering, Hyper Spectral, Microwave and LIDAR Remote
Sensing, Pavement Engineering.
Master degree in engineering/ Technology/ Sciences in respective
discipline or equivalent with a minimum 60% marks in aggregate (of
all the years/Semesters) or equivalent
cumulative Grade point Average (CGPA) as determined by the Delhi
Technological University and at least
60% marks in aggregate (of all the years/Semester) or equivalent CGPA at
Bachelor’s degree level shall be
eligible to apply for admission to a Ph.D. programme of the University
provided he should not have attained
an age of 50 yrs. The relaxation in age limit may be done by Academic
Council on case to case basis. In exceptional cases applicant with
Bachelors degree in Engineering &
Technology having minimum 75% marks in aggregate (of all semesters) or
Equivalent CGPA and having proven
research capability may also be considered eligible.
DDME01 Mechanical Engineering
Turbo Machinery, Fluid Mechanics, CFD, Power Plant
Engineering, I.C. Engines, Industrial Engineering & Supply Chain
Mgmt, Solar Energy, Bio Fuels, Power Plant, Robotics,
CAD/ANN, GA & Welding Production Engineering, Machine
Design, System Dynamics, Structural Vibration, Modeling &
Simulation, Turbo Machine Refrigeration and Airconditioning,
Computational Fluid Dynamics, Production Engineering, Solar
Energy, CAM/Automation, Industrial Engineering &
Refrigeration, Advanced Manufacturing Process, Human Factor
Engineering, Automobile Engineering, Machine Design,
Industrial Management Quality Engineering.
Master degree in engineering/
Technology/Sciences in respective discipline or equivalent with a
minimum 60% marks in aggregate (of
all the years/Semesters) or equivalent cumulative Grade point Average
(CGPA) as determined by the Delhi
Technological University and at least 60% marks in aggregate (of all the
years/Semester) or equivalent CGPA at Bachelor’s degree level shall be
eligible to apply for admission to a
Ph.D. programme of the University provided he should not have attained
an age of 50 yrs. The relaxation in age
limit may be done by Academic Council on case to case basis. In
exceptional cases applicant with
Bachelors degree in Engineering & Technology having minimum 75%
marks in aggregate (of all semesters) or
Equivalent CGPA and having proven research capability may also be
considered eligible.
68
Code Department Fields of Specialization Minimum Qualification
DDEE01 Electrical Engineering
Power system Optimization, AI Techniques, Modeling & Analysis
of Electrical Machines, Power Electronics & Drives Intelligent
control of non linear systems, FACTS, SSR, voltage stability,
power Quality Improvement, Grid Integration, Micro Grid, smart
Grid, BPL Analog Signal processing (Linear & Non Linear),
Power system & control, system Engineering, Power system
Analysis, Intelligent control Power electronics, renewable energy,
HVDC, Power Quality, power system restructuring, AI in
Electricity market forecasting, Wind Energy forecasting
Embedded System, Information security, design of power supply,
Electric traction systems, Analog Signal Processing Energy
Conversion and microgrid.
Master degree in Engineering/
Technology/ Sciences in respective
discipline or equivalent with a
minimum 60% marks in aggregate (of
all the years/Semesters) or equivalent
cumulative Grade point Average
(CGPA) as determined by the Delhi
Technological University and at least
60% marks in aggregate (of all the
years/Semester) or equivalent CGPA at
Bachelor’s degree level shall be
eligible to apply for admission to a
Ph.D. programme of the University
provided he should not have attained
an age of 50 yrs. The relaxation in age
limit may be done by Academic
Council on case to case basis. In
exceptional cases applicant with
Bachelors degree in Engineering &
Technology having minimum 75%
marks in aggregate (of all semesters) or
Equivalent CGPA and having proven
research capability may also be
considered eligible.
DDPS01 Polymer Science &
Chemical Technology
Chemistry including synthetic organic chemistry, Bio inorganic
chemistry, Bio organic chemistry, cheminformatics; Medicinal
Chemistry; including gene delivery applications, Bio Materials,
Drug Delivery systems; Polymer Science including fiber
Technology, Conducting Polymers/composites / hydrogels:
Chemical Engineering including Reaction engineering,
Mulitphase reactor systems and design, Pollution abatement
technology and gene; Advance materials development,
Separation Processes, Transport Phenomena, Pharmacetuicals
Sciences, Food Science.
Master degree in Engineering/
Technology/ Sciences in respective
discipline or equivalent with a
minimum 60% marks in aggregate (of
all the years/Semesters) or equivalent
cumulative Grade point Average
(CGPA) as determined by the Delhi
Technological University and at least
60% marks in aggregate (of all the
years/Semester) or equivalent CGPA at
Bachelor’s degree level shall be
eligible to apply for admission to a
Ph.D. programme of the University
provided he should not have attained an
age of 50 yrs. The relaxation in age
limit may be done by Academic
Council on case to case basis. In
exceptional cases applicant with
Bachelors degree in Engineering &
Technology having minimum 75%
marks in aggregate (of all semesters) or
Equivalent CGPA and having proven
research capability may also be
considered eligible.
19. Giani Zail Singh Campus College of Engineering & Technology, Bathinda (Punjab) - 151 001 – GZ
Code Department Fields of Specialization Minimum Qualification
GZME01 Mechanical
Engineering
Investment Casting welding, Supply Chain Management, Rapid
Prototyping FDM, Additive Manufacturing, CNC Machining,
Supply Chain Design and Optimization, Heat Transfer and Fluid
Flow.
M.Tech./ M.E. in Mechanical
Engineering/ Production Engineering/
Industrial Engineering/ Production and
Industrial Engineering.
GZEC01
Electronics &
Communication
Engineering
Soft Computing, Real time systems, Multiprocessor scheduling,
Communication system, Wireless Communication, Antennas and
Soft Cam-piling, Electric Power Dispatch Studies, Frequency
linked pricing in deregulated power sector.
M. Tech/ M.E. Electronics/ Electronics
& Communication Engineering
GZCE01 Civil Engineering Transportation Engineering, Structural Engineering,
Environmental & Structural Engineering.
M.Tech./ M.E. Structural Engineering,
Transportation Engg., Environmental
Engineering or in relevant discipline
69
Code Department Fields of Specialization Minimum Qualification
GZTX01 Textile Engineering
Textile Technology,
Yarn Production Technology, Technical Textile,
Textile Engineering,
Clothing Comfort, Fiber and Yarn Manufacturing,
Textile mechanics textile comfort,
Textile product design,
Experimental design and statistical analysis.
M.Tech./ M.E. in the relevant
discipline.
GZCS01 Computer Science &
Engineering
Natural language processing, Digital image processing, Networks,
Software Engineering,
Software System,
Computer network, Mobile Adhoc Networks, ANT Colony,
Optimization routing, Integrated and differentiated services
Congestion.
M.Tech./ M.E. in the relevant
discipline.
GZEE01 Electrical Engineering Control System, Measurement and Instrumentation, Power
System.
M.Tech./ M.E. in the relevant
discipline.
20. Government College of Engineering, Amravati (Maharashtra) - 444 604 – AM
Code Department Fields of Specialization Minimum Qualification
AMEE01 Electrical Engineering
Power System Operation and Control, Power System Protection
and Stability, Deregulation, Electrical Network, Congestion
Management, FACTs and Power re-routing, Application of
Optimization and AI Techniques to Power System, Power
Electronics, Distributed Generation.
M.E./M.Tech or equivalent degree in
relevant branch And
As per the affiliating University norms.
i.e Sant Gadge Baba Amravati
University.
AMME01 Mechanical
Engineering Thermal Engineering, Production Engineering.
M.E./ M.Tech or equivalent degree in
relevant branch And
As per the affiliating University norms.
i.e Sant Gadge Baba Amravati
University.
AMCE01 Civil Engineering
Geotechnical Engineering: Foundations, Earth and Earth
Retaining Structures, Ground Improvement Techniques,
Geoenvironment Engineering, Earthquake Geotechnical
Engineering.
M.E./ M.Tech. or equivalent degree in
relevant branch And
As per the affiliating University norms.
i.e Sant Gadge Baba Amravati
University.
Water resources and Environment Engineering: Open Channel
Flows, Urban Water Distribution Systems, Environmental
Hydraulics, Water Quality Modeling, Hydraulics, Water Quality
Modeling, Hydraulic Structures.
Structure Engineering: Structure Mechanics, FEM Techniques,
RC and Prestressed concrete, Masonry Structures, Structure
Dynamics, Non-Linear and Stochastic Dynamical Systems,
Earthquake Engineering, Structural safety, Fracture Mechanics of
Concrete, Materials in Civil Engineering, Structural Health
Monitoring.
21. Govt. College of Engineering, Aurangabad 431 005 – GA (Addendum)
Code Department Fields of Specialization Minimum Qualification
GACE01 Civil Engineering
Water Resources Engineering, Environmental Engineering,
Transportation Engineering, Structural Engineering, Earthquake
Engineering, Advanced Concrete Technology and Structural
Analysis, Fracture Mechanics, FEA of structures, Ferrocement
Structures, Concrete Technology Design of RCC/ Steel Structures,
GIS and Remote sensing applications in Water Resource
Engineering, Climate change studies.
As per the norms of Dr. Babasaheb
Ambedkar Marathwada University,
Aurangabad (Maharashtra).
1.www.bamu.ac.in
2.http://bamua.digitaluniversity.ac
GAEE01 Electrical Engineering Applications of Power Electronics, Electrical Drive, Renewable
Energy Systems, Special Machines, Electrical Power System.
70
Code Department Fields of Specialization Minimum Qualification
GAEC01
Electronics &
Telecommunication
Engineering
Signal and Image Processing, Communication Engineering,
Pattern Recognition, ANN.
As per the norms of Dr. Babasaheb
Ambedkar Marathwada University,
Aurangabad (Maharashtra).
1.www.bamu.ac.in
2.http://bamua.digitaluniversity.ac
22. Govt. Engineering College, Thrissur 680 009– GK
Code Department Fields of Specialization Minimum Qualification
GKCE01 Civil Engineering Hydraulics & Water resources Engineering, Environmental
Engineering.
Masters in Technology/ Engineering Degree in the relevant field.
GKME01 Mechanical Engineering
Fracture Mechanics, Structural Mechanics, Computational
Mechanics, Finite Element Analysis, Stress Analysis, Manufacturing Technology, Computational Fluid Dynamics, I C Engines, Energy- Exergy analysis, solar energy, Fuel Cells,
Tribology & Tribology.
GKEE01 Electrical Engineering
Power Electronics & Drives, Power Quality, Power Systems,
Energy Management, High Voltage, Image Processing in Biomedical Applications/Control Systems, Soft Computing & Applications.
23. Govt. College of Engineering, Salem – 636 011 – GC
Code Department Fields of Specialization Minimum Qualification
GCCE01 Civil Engineering Structural Engineering Environmental Engineering.
M.E./M.Tech. First Class or M.S.(by
research) in the relevant branch of
Engineering.
GCME01 Mechanical
Engineering
Mobile Robotics, Nano Coating/Nano Fluids, Composite Material
Characterization, Alternate Refrigerants, Engine Research with
Biofuels, Micro Machining, Design/Thermal Engineering.
ME/M.Tech. First Class or M.S.(by
research) in the relevant branch of
Engineering.
GCEE01 Electrical Engineering
Electrical and Electronics Engineering including power systems
Engineering, High Voltage Engineering, Power Electronics and
Drives, Embedded control Systems, Control and Instrumentation,
Embedded System Technologies.
ME/M.Tech. First Class or M.S.(by
research) in the relevant branch of
Engineering.
24. Guru Nanak Dev Engineering College, Ludhiana – 141 006 - GN
Code Department Fields of Specialization
GNCE01 Civil Engineering
1. Structure Engineering
2. Geo-Technical Engineering
3. Transportation Engineering 4. .Computer Aided Design.
GNME01 Mechanical Engineering
1. Thermal Engineering
2. Industrial Engineering
3. Production Engineering.
GNEE01 Electrical Engineering
1. Power Systems Operation and Control
2. Restructuring of Power System 3. Reliability and Maintenance Engineering
25. Harcourt Butler Technological Institute, Kanpur (Uttar Pradesh) - 208 002 - HK
Code Department Fields of Specialization Minimum Qualification
HKCE01 Civil Engineering
Structural Engineering, Water Resources
Engineering, Environmental Engineering,
Transportation Engineering.
Master’s degree in Civil Engineering with First
division or equivalent.
HKME01 Mechanical
Engineering
Thermal Engineering, Manufacturing
Technology, Design Engineering.
Master’s degree in Mechanical Engineering with
First division or equivalent.
71
Code Department Fields of Specialization Minimum Qualification
HKEC01 Electronics Engineering
Optical Network, Optical Communication M.Tech. Electronics Engineering with First
division or equivalent.
Digital Signal Processing, Digital Signal
Processors, Computer Arithmetic, VLSI Design
M.Tech. Electronics Engineering/ Electronics &
Communication/ Electronics & Instrumentation/
Electrical & Electronics with First division or
equivalent.
Wireless Communication
M.Tech. Electronics Engineering/ Electronics &
Communication/ Electronics & Instrumentation/
electrical & Electronics with First division or
equivalent.
HKCH01 Chemical Engineering
Catalysis & Kinetics
M.Tech. Chemical Engineering with First Division
or equivalent.
Emulsion Polymerization
Petroleum
Environmental Engineering
26. Indian Institute of Engineering Science and Technology, Shibprur- (Formerly Bengal Engineering and Science
University, Shibpur) - BE
Code Department Fields of Specialization Minimum Qualification
BECE01 Civil Engineering
Structural Engineering. & Concrete Technology,
Soil Mechanics & Foundation Engineering, Water
resource Engineering, Environment Engineering,
Highway and Traffic Engineering etc.
Post Graduate Degree in the relevant field in
Engineering or equivalent.
BEEE01 Electrical Engineering Power Systems, Electrical Machines, Control
Systems, Power Electronics & Drives
Post Graduate Degree in the relevant field in
Engineering or equivalent.
BEME01 Mechanical Engineering Machine Design, Heat Power Engineering,
Production Engineering.
Post Graduate Degree in the relevant field in
Engineering or equivalent.
BEMI01 Mining Engineering
GSI/GPS/Remote Sensing, Occupational Health &
Safety, Coal bed methane & Carbon sequestration,
Mine Environment, Mineral Dressing.
Post Graduate Degree in the relevant field in
Engineering or equivalent.
BEAE01 Aerospace Engineering &
Applied Mechanics
Bio-Mechanics, Soil Structure, Robotics, Fluid
Mechanics/ Hydraulics, Computational Mechanic,
Earthquake Engineering and Structural Dynamics.
Post Graduate Degree in the relevant field in
Engineering or equivalent.
BEIT01 Information Technology
Systems Architecture Design and Test, Theory and
Applications of Cellular Automata, Digital Image
Watermarking and Signal Processing, Digital
Geometry and Mobile Communication, Sensor
Network.
Post Graduate Degree in the relevant field in
Engineering or equivalent.
BEMT01 Metallurgy and Materials
Engineering
Nano Materials, High Strength Steel, Phase
Transformation, Diffusion Bonding, Neural
Network, Tribology.
Post Graduate Degree in the relevant field in
Engineering or equivalent.
27. Indian Institute of Technology (Indian School of Mines), Dhanbad 826 004 – IS
The eligibility for Ph.D Programmes is 1st class or equivalent in post-graduate degree.
Code Department Fields of Specialization Minimum Qualification
ISMI01 Mining
Engineering
Coal Mining, Metalliferrous Mining, Mine
Planning & Design, Mine Systems Engineering,
Rock Mechanics, Rock Excavation Engineering,
Mine Environment, Open Cast Mining, Mine
Surveying, Mine and Mineral Economics, Mine
Management, Surface Environment, Marine
Mining, Mine Safety Engineering.
Master’s Degree in Mining Engineering.
72
Code Department Fields of Specialization Minimum Qualification
ISME01 Mechanical Engineering Mechanical Engineering.
M.E./ M.Tech degree with specialization in
Mechanical/ Production/ Manufacturing/ Industrial
Production/ CAD-CAM/ Machine Design/
Mechatronics/ Thermal/ Heat Power/ Energy/ Power
Plant/ Automobile/ Maintenance Engineering &
Tribology with B.E./ B.Tech or equivalent degree in
Mechanical/ Production/ Manufacturing/ Aerospace/
Energy Engineering.
ISCE01 Civil Engineering Civil Engineering.
M.Tech/ M.E. in Civil Engineering with B.Tech/ B.E. in Civil Engineering/ Env. Engineering having
specialization in their M.Tech/ M.E. as Structural/
Geotechnical/ Water Resources/ Environmental/ Transportation Engineering/ Remote Sensing &
GIS/ Env. Science & Engineering.
ISEE01 Electrical & Electronics
Engineering Electrical & Electronics Engineering.
M.Tech or equivalent in Electrical Engineering/
Control System Engineering/ Power System Engineering/ Electrical Machines/ Power
Electronics and Drives/ High Voltage Engineering/
Instrumentation Engineering/ Power Apparatus & Devices / Electronics with B.Tech or equivalent in
Electrical/ Electrical & Electronics Engineering.
ISEC01
Electronics &
Communication
Engineering
Electronics & Communication
Engineering.
M.Tech/ M.E./ MS in Electronics/ Electronics &
Communication/ Electronics & Tele-communication/
Electronics & Instrumentation/ Instrumentation/ Electronics & Electrical Engineering or related field
with B.Tech/ B.E. or equivalent degree in Electronics/
Electronics & Communication/ Electronics & Tele-communication/ Electronics & Instrumentation/
Instrumentation/ Electronics & Electrical
Engineering.
ISCS01 Computer Science &
Engineering Computer Science & Engineering.
M.Tech or equivalent in Computer Science & Engineering/ Information Technology/ Computer
Application/ Software Engineering/ Electronics
Engineering/ Electronics and Communication Engineering/ Electrical Engineering with B.Tech. or
equivalent in Computer Science & Engineering/ Information Technology/ Electronics Engineering/
Electronics and Communication Engineering/
Electrical Engineering.
28. Indira Gandhi Institute of Technology, Sarang, (Odisha) - 759 146 - IO
Code Department Fields of Specialization Minimum Qualification
IOCE01 Civil Engineering Structural Engineering, Geotechnical
Engineering, Transportation Engineering.
First Division or 60% marks in B. Tech in Civil
Engineering & M. Tech. in relevant field.
IOME01 Mechanical Engineering
Machine Design, Production Engineering,
Thermal Engineering.
First Division or 60% marks in B. Tech in
Mechanical Engg. & M.Tech. in relevant field.
IOEE01 Electrical Engineering M/c Drives & Power Electronics, Power Systems
Engineering, Signal & Image Processing.
First Division or 60% marks in B. Tech in Electrical
Engg OR in Electrical & Electronics Engineering
(EEE) & M. Tech. in relevant field.
29. Jadavpur University, Kolkata 700 032 – JU
Eligibility for candidates of SC/ST/PD to Ph.D degree programme (Engineering. /Tech./Arch./Pharm.) of Jadavpur University is at least "Pass Class"
marks in Master’s Degree in Engineering./Tech./Pharm./Arch. or equivalent.
Code Department Fields of Specialization Minimum Qualification
JUEE01
Electrical Engineering
Control Systems: Control and guidance,
Knowledge-base systems, Artificial Intelligence,
Software Engineering, Stochastic Processes,
Distributed Computer Control Theory, Motion
Control and Power Conditioning. Master’s degree in Electrical Engineering.
JUEE02
Electrical Machines: System Optimization, Optimal Design of Electrical Machines,
Synchronous Machines Stability, Electrical
Drives, Wind Energy.
73
Code Department Fields of Specialization Minimum Qualification
JUEE03
Electrical Engineering
Electrical Measurements: Digital and
Microprocessor-based Instrumentation, Biomedical Instrumentation, Digital Signal
Processing, Process Instrumentation, Fiber Optic
Instrumentation.
Master’s degree in Electrical Engineering. JUEE04
High Voltage Engineering: High Voltage
Laboratory Techniques, Field Analysis and
Computation, Discharge Phenomena in Gas, Liquid and Solid and Solid Media, Dielectric
Engineering, Surge Analysis.
JUEE05
Power Systems: Computer-Aided Power System
Analysis Microprocessor Applications, Power Electronics, Power Systems Protection, Power
System Control.
JUEC01
Electronics &
Telecommunication Engineering
Communication Engineering: Digital
Communication, Data Compression, Image
Processing, Fiber Optic Communication, Analog
and Digital Mixed Signal Circuits and Systems.
Master’s degree in Electrical Engineering &
Telecommunication Engineering
JUEC02
Computer Engineering: Programme Semantics,
Compiler, Operating System, Computer
Architecture, Artificial Intelligence, Pattern
Recognition, Neural Networks.
JUEC03 Control Engineering: Digital Control, Robotics,
Adaptive and Optimal Control, Fuzzy Control.
JUEC04
Electronic Devices: Photovoltaic Energy Conversion, Power Semiconductor Devices, Semiconductor Device Modeling, Electrical Conduction and Related Phenomena in Semiconductors and Superconductors, Microelectronics Technology, Nano Crystalline Materials and Devices, EDA, Sensors, MENS, VLSI Circuit Design and Implementation.
JUEC05
Microwave Engineering: Microwave and
Millimeter Wave Antenna Theory and Technique,
MicrostripComponents, Antennas and Arrays,
Electromagnetic Interference and Compatibility,
Electrostatic Charging and Discharging.
JUME01
Mechanical Engineering
Applied Mechanics.
Master’s degree In Mechanical Engineering with at
least 60% marks (and also in the preceding degree)
JUME02 Heat Power Engineering.
JUME03 Fluid and Hydraulic Engineering (incl. Water
Resources).
JUME04 Production Engineering.
JUME05 Machine Design (including Bioengineering).
JUPE01
Production Engineering
Production Technology: Machine tools and Metal cutting, Non-tradition machining,
Advanced material machining, CAD/CAM,
Robotics, Tribology, Computer integrated manufacturing, Flexible automation, Precision
engineering, Micro machining, Ergonomics,
Designing for production, Manufacturing systems simulation. Master’s degree in any branch of Engineering/
Technology.
JUPE02
Production Management: Operations
Management, Quantitative Management, Terotechnology, Reliability, Behavioral science,
Enterprise resource planning (ERP), Supply
chain management (SCM), Quality Engineering, Waste management.
74
30. Jamia Millia Islamia University, New Delhi -110 025 – JM
Code Department Fields of Specialization Minimum Qualification
JMEE01 Electrical Engineering
Power Systems,
Machines, Drives and Power Electronics,
Control and Instrumentation,
Electronics Communication and Computer
Technology.
Minimum 55% in M. Tech. in allied specialization
of Electrical Engineering after B. Tech./ B.E.
or
Minimum 55% in M. Tech. in allied specialization
of Electrical Engineering after M. Sc.
31. Kamla Nehru Institute of Technology, Sultanpur (Uttar Pradesh) - 228 118 - KS
Candidate should have M Tech Degree in the appropriate branch of study (as given in the last column) with first class or minimum 60% marks (CGPA
6.5/10). For SC/ST/PD candidates 50% minimum marks or CGPA of 5.5/10.
Code Department Fields of Specialization Minimum Qualification
KSEE01 Electrical Engineering
Power Systems, Power Electronics and Drives,
Control Systems, Distributed Generations, Power
Quality, AI applications in Power Systems and
Control Systems, Transmission System and
FACTS.
M.Tech. degree in Electrical Engineering (Power
Systems/ Power Electronics/ Electric Drives/
Control and Instrumentation).
32. Madan Mohan Malaviya University of Technology Gorakhpur - 273 010 (Uttar Pradesh) MM
The minimum requirement is 60% or equivalent CPI (for SC/ST 55% or equivalent CPI) at qualifying degree.
Code Department Fields of Specialization
MMCE01 Civil Engineering
Geotechnical and Geo-Environmental Engineering
Ground Characterization.
Ground Improvement.
Solid Waste Management.
Innovative Foundations.
Physical Modeling.
Hydraulics and Water Resources Engineering
Fluvial Hydraulics.
Local Scour.
Scour and Scour Counter Measures.
Hydraulics Structures.
River Training & Protection Works.
Environmental Engineering
Air Pollution.
Noise Pollution.
Effluent Treatment Process and Modeling.
Water Characterization
Water and Waste water treatment.
Environmental impact Assessment and Management.
Remote Sensing and Engineering Survey
GIS and Its Application.
GPS and Its Application.
Remote Sensing/Geospatial Engg.
Structures
Concrete Structures.
Steel Structures.
Transportation Engineering
Highway Engg.
Airport Engineering.
MMEE01 Electrical Engineering
Bio-instrumentation/Bio-Medical Signal Processing, Power Electronics, Electrical Machines and Drives,
Power System Analysis, Restructuring and FACTS Devices, Advance Control, Process Control and
Instrumentation.
MMME01 Mechanical
Engineering
Production & Industrial Engineering
Metal Cutting, Advanced Manufacturing Technology, CAD/CAM.CIM, Automation, Robotics,
Quality Management, Inventory Management, Supply Chain Management Operations Research,
Modeling and Simulation, System Dynamics, Material Science.
Design Engineering
Design Engineering: Stress-strain Analysis, Mathematical Modeling, CAD, and Optimization.
Mechanical Vibration.
75
Code Department Fields of Specialization
MMEC01
Electronics &
Communication
Engineering
Communication and Signal Processing
Wireless Communication.
Data Communication.
Microwave Engg.
Optical Communication.
Signal Processing & Coding Theory.
Integrated Electronics & Circuits
VLSI Design.
Analog & Digital Circuits Design.
Microelectronics.
Device Modeling.
Electronic System and Instrumentation
Embedded System Design.
Electronic Instrumentation.
Microprocessor based Applications.
Artificial Neural Network and Fuzzy logic.
33. Madhav Institute of Technology & Science, Gwalior – 474 005 – MG
Code Department Fields of Specialization Minimum Qualification
MGCE01 Civil Engineering Water Resources Engineering; Construction Technology & Management; Structural
Engineering; Environmental Hydraulics.
M.E./ M.Tech. or Equivalent degree in Civil
Engineering with at least 60% marks or equivalent
grade (55% marks or equivalent grade for SC/ST candidates).
MGEE01 Electrical Engineering
Power systems; Biomedical Signal Processing; Application of AI & Soft Computing Techniques for Electrical Engineering; Condition Based
monitoring of Electrical Machines, Control Engg., Renewable Energy; Nature inspired optimization, Economic Load Dispatch, Optimal
Power Flow, Reactive Power Dispatch, Distributed Generation FACTS Controllers.
M.E./M.Tech in Electrical Engineering, Electronics &
Instrumentation, Electronics Engg, Electrical &
Electronics and Biomedical Engg. with at least 60% marks or equivalent grade (55% marks or equivalent
grade for SC/ST candidates)
MGCS01 Computer Science &
Engineering Data Mining & Warehousing; Image Processing & Retrieval Techniques; Networking
M.E./M.Tech in Computer Science & Engineering or Information Technology or any other Specialization
of Computer Science & Engineering and Information Technology with at least 60% marks or equivalent
grade (55% marks or equivalent grade for SC/ST
candidates)
MGME01 Mechanical Engineering
Vibration & Noise Control; Design Engineering;
Maintenance Engineering Tribology; Condition Monitoring; Industrial Engineering; Supply Chain Management; Production Engineering;
Material Handling; Non-Conventional Energy System; Solar Energy, Heat Transfer; PV Technology; Green House Technologies;
Thermal Engineering, FEA, Fracture Mechanics,
Composite Material FGM.
M.E./M.Tech. in the relevant discipline with at least 60% marks or equivalent grade (55% marks or
equivalent grade for SC/ST candidates).
MGAR01 Architecture
Environmental Planning; Urban Design; Urban Planning; Urban Development, Energy Systems;
Construction Management/ Project, Architecture, Interior Environment, Landscape Architecture and Conservation Energy & Sustainability,
Facility Management.
M.Arch., M.Planning, M.E. or M.Tech. (Civil), with
B.Arch/ Planning (Master in any Architecture,
Planning & Construction Technology related subject) with at least 60% marks or equivalent grade (55%
marks or equivalent grade for SC/ST candidates).
34. Manipal Institute of Technology – Manipal 576 104 - MI
Code Department Fields of Specialization Minimum Qualification
MICE01
Civil Engineering
Structural Engineering. B.E./ B.Tech. in Civil Engineering, PG in Structural/
Geotechnical Engineering with minimum 55% marks MICE02 Geotechnical Engineering.
MICE03 Environmental Engineering. B.E./ B.Tech. in Civil/ Environmental Engineering,
PG in Hydraulics/ Water Resources/ Environmental
Engineering with minimum 55% marks MICE04 Water Resources Engineering.
MICE05 Earth Science. M.Sc. Geology/ M.Sc. Marine Geology with
minimum 55% marks
76
Code Department Fields of Specialization Minimum Qualification
MIMM01
Mechanical &
Manufacturing
Engineering
Tribology. PG in Machine Design/ Manufacturing Engineering
or related streams with minimum 55% marks.
MIMM02 Machining of Metals & Composites. PG in Manufacturing Engineering or related streams
with minimum 55% marks.
MIMM03 IC Engines & Combustion.
PG in Thermal Engineering or related streams with
minimum 55% marks. MIMM04 Solar Thermal Energy.
MIMM05 Turbomachinery.
MIMM06 Biomechanics. PG in Machine Design/ Biomedical Engineering or
related streams with minimum 55% marks.
MIMM07 Materials Engineering PG in Material Science/ Matellurgy/ Manufacturing
Engineering with min.55% marks.
35. Malaviya National Institute of Technology, Jaipur - 302 017 - MJ
The minimum eligibility criteria for admission to PhD is that at PG level the candidate should have secured a minimum CGPA of 6.5 on the 10 point
scale (60% marks, only where CGPA is not awarded) with a relaxation for SC/ST implying minimum of 6.0 on the 10 point scale (55% marks, only
where CGPA is not awarded) in qualifying degree.
Code Department Fields of Specialization Minimum Qualification
MJCE01 Civil Engineering All specialization relevant to Civil Engineering
field.
M.E./ M.Tech. degree in relevant engineering
discipline.
MJCH01 Chemical Engineering
Environmental Engg., Advanced Process
Control, Colloid And Interface Science, Advanced Separation Processes, Wastewater
Treatment, Heat Transfer, Polymer, Modelling
And Simulation, Chemical Reaction Engineering, Oil/ Fat Processing, Bioprocess
Engineering, Membrane Separation, Biofuels, Novel Separation Techniques, Industrial
Pollution Abatement, Biotechnology, Fluid
Particle Mechanics, Adsorption, Thermodynamics, Colloid And Interface
Science, Composite Materials, Soft Matter, Thin
films, Finite Element Method, Artificial Intelligence And Applications To Intelligent
Control, Optimizations & Systems Applications,
Solid Waste Management, Petroleum Refinery Engineering, Transport Phenomena,
Computational method for linear/non-linear
problems, Polymer Process Modeling, Piping Engineering, Numerical Modelling,
Computational Fluid Dynamics (CFD),Process
Intensification, Advanced Oxidation Technique, Cavitation, Sonochemistry.
B.Tech./ M.Tech. or equivalent degree in Chemical
Engineering, B.Tech./ M.Tech. or equivalent degree in
any branch of Engineering/Chemical Technology and
interdisciplinary areas.
MJEE01 Electrical Engineering
Power Electronics and Drives, Application of
power electronic converters for Wind and PV system, Design and applications of switched
mode power supplies, Energy management
scheme for hybrid autonomous microgrid, Power quality improvement in power
converters, Voltage stability, FACTS devices,
and power system operation and control, AI Applications To Power System, Electricity
Markets, Power Systems Restructuring, Smart Grid , Power System Planning, Risk
Management in Power System, Renewable
Energy, Computational Intelligence in Power System, Demand response, Distribution system
assets optimization, Integration of Microgrids
and distributed generations, Optimal PMUs placement, Real-time optimal operation of
distribution networks, Control of Discrete-time
systems, Design of Observers for linear systems, Issues relating Deregulated & Restructured
Power Systems, Real Time Visualization of
Power Systems using WAMS, Application of AI techniques for Power System Operation and
Control, Distributed Generation Placement and
Integration Issues. Machine Learning, Robotics, Data Analytics.
M.E./ M.Tech. or equivalent degree in respective and
relevant Engineering disciplines.
77
Code Department Fields of Specialization Minimum Qualification
MJME01 Mechanical
Engineering
Industrial Engineering, Design Engineering,
Production Engineering and Thermal
Engineering.
The applicant must have Master's degree in any
discipline of Mechanical Engineering (Industrial
Engg., Design Engg., Production Engg. and Thermal
Engg.) with CGPA not below 6.5 on a ten point scale
or 60% marks (Where CGPA is not awarded).
MJMT01 Metallurgical & Materials
Engineering Metallurgical & Materials Engineering.
B.E./ B.Tech degree in Metallurgical/ Materials/
Mechanical/ Chemical/ Ceramic Engineering/
Nanotechnology (Engineering materials) with M.E./
M.Tech degree in Metallurgical/ Materials/ Ceramic
Engineering/ Nanotechnology (Engineering
materials).Nanotechnology (Engg. Materials)
students should have Physics, Chemistry, and
Mathematics at 12th and B.Sc. level.
MJEC01
Electronic &
Communication
Engineering
Communications, VLSI, MEMS, Embedded
System, Microwave Engineering, Optical
Communication System.
B.Tech. and M.Tech. Electrical/ Electronics/
Computer/ Communication/ Telecommunication/
Instrumentation/ Control/ Microelectronics or
equivalent discipline consistent with research areas of
department.
MJCS01 Computer Engineering
Language and Compilers, computer
Architecture, Deep Learning, Embedded
System, Computer Communication, Real Time
Systems, Parallel and Distributed Processing,
Software Engineering, Software Testing,
Intelligent Systems, Security and Forensics, Big
Data, Cloud Computing, IoT (Internet of
Things), Ad hoc Networks, Video Processing,
Video Surveillance, Underwater Image and
Video Processing, Image Processing,
Biometrics, Machine Vision, Computing, NOC,
Wireless Networks, Database, Natural
Language Processing, Information Retrieval,
Data Mining, Information Security, Multicore
Architecture, Malware Analysis, Embedded
Systems and latest thrust areas in computer and
communication.
B.Tech. and M.Tech in computer Science and
Engineering/ Computer Engineering/ Computer
Science/ Information Technology/ Communication
and Computer Engineering/ Information and
Communication Technology/ Electronics/
Communication/ Telecommunication/ Control/
Microelectronics or equivalent discipline consistent
with research areas of department.
MJCE01
Centre for Energy and
Environment
Engineering
Water/ Waste water/ industrial waste water
treatment, energy efficiency in building, solar
PV, solar thermal, wind energy, bioenergy, smart
grid, environmental impact assessment, energy
management, smart city planning, smart
buildings, energy storage, energy policy.
B.E./ B.Tech./ B.Arch. and M.E./ M.Tech./ M.Arch./
M.Plan. in relevant disciplines.
MJMS01 Management Studies
Corporate Finance, Behavioral Finance,
Technology Adoption, Behavior in Digital
Environments, Sustainable Consumption.
The applicant must have the MBA with preferable
Engineering background/ M.Tech./ M.Plan. with
CGPA not below 6.5 on a ten point scale or 60% marks
(where CGPA is not awarded).
MJAR01 Architecture and
Planning
All specialization relevant to Architecture and
Planning.
1. Masters degree or equivalent in
Architecture/Planning/other relevant discipline.
2. B.Arch./B.Plan.
MJDM01
National Centre for
Disaster Mitigation and
Management
Earthquake Engineering and/ or Structural
Engineering.
UG degree in Civil Engineering. PG degree
specialization in Earthquake Engineering and/or
Structural Engineering.
78
36. Motilal Nehru National Institute of Technology, Allahabad 211 004 – MN
The minimum requirement is 60% or equivalent CPI (for SC/ST 55% or equivalent CPI) at qualifying degree.
Code Department Fields of Specialization Minimum Qualification
MNAM01 Applied Mechanics
Solid Mechanics, Computational Mechanics,
Composite and Smart Structures, Stability and
Dynamics of Structures, Advanced Materials,
Stealth Materials, Materials Science and
Engineering, Fatigue and Fracture, Mechanical
Behaviour of Materials, Vehicle
Crashworthiness, Low Energy Impact, Ballistic
Impact and Blast Loading, Robotics and
Mechanisms, Fluid Mechanics and Machines,
Multiphase Flow, Computational Fluid
Dynamics, Biomechanics, MEMS, Sound and
Acoustics, etc. Solid Mechanics, Computational
Mechanics, Composite and Smart Structures,
Stability and Dynamics of Structures, Advanced
Materials, Stealth Materials, Materials Science
and Engineering, Fatigue and Fracture,
Mechanical Behaviour of Materials, Vehicle
Crashworthiness, Low Energy Impact, Ballistic
Impact and Blast Loading, Robotics and
Mechanisms, Fluid Mechanics and Machines,
Multiphase Flow, Computational Fluid
Dynamics, Biomechanics, MEMS, Sound and
Acoustics, etc.
M.Tech or Equivalent degree Mechanical
Engineering, Civil Engineering, Metallurgical
Engineering, Production Engineering, Ceramics,
Materials Enfineering, Textile Engineering, Ocean
Engineering, Naval Architecture, Marine Structure,
Materials Science, Applied Mechanics, Fluid
Engineering, Aeronautical Engineering, Chemical
Engineering, Marine Engineering, Biomedical
Engineering, M.Sc of equivalent degree in Physics/
Mathematics with 60% marks (55% or Equivalent for
SC/ST candidates).
MNBT01 Biotechnology
Molecular Biology, Microbiology,
Environmental Biotechnology, Agricultural
Biotechnology, Immunology and Bioprocess
development.
M.Tech (biotechnology), Bioinformatics and
Biochemical Engineering, or M.Se. in Biotechnology
or M.Se. in Applied Biological Science Such as
Microbiology, Biochemistry, Genetics, Molecular
Biology, Pharmacy and Biophysics.
MNCE01 Civil Engineering
Structural Engineering, Geotechnical
Engineering, Environmental Engineering,
Transportation Engineering, GIS,
Environmental Geotechnical, Remote Sensing,
Water Resource Engineering, Construction
Management.
M.Tech or Equivalent degree in Aeronautical
Engineering, Architectural Engineering, Civil
Chemical Engineering, M.Sc. Environmental Science
or Equivalent. With 60% marks (55% or Equivalent for
SC/ST candidates).
MNCS01 Computer Science &
Engineering
Data Base, Software Engineering, Mobile
Computing, Parallel Computing, Computer
Architecture, Computer Algorithmic, Data
Mining, Knowledge Based System, Real Time
System, Distributed Computing.
M.Tech or Equivalent degree in Computer Science &
Engineering, Software Engineering, Information
Technology, Electrical Engineering,
Electronics Engineering and Communication
Engineering. With 60% marks (55% or Equivalent for
SC/ST candidates).
MNEE01 Electrical Engineering
Control Systems and Mathematical Modeling,
Nonlinear Systems, Model Reduction, Fuzzy
Logic, Neural Networks, Al in Power Systems,
Wireless Sensor Networks, Transmission
Systems & FACTs, Power Electronics,
Distribution Systems and Custom Power
Devise, Distributed Generation & Control,
Power Quality Modem, Electric Drives,
Instrumentation Systems, Bio-medical
Instrumentation, Virtual Instrumentation, Power
Systems Protection.
M.Tech or Equivalent degree in Electrical
Engineering, Electronics and Communication
Engineering and Electronics Electrical Engineering,
Electronics Engineering and Communication
Engineering. With 60% marks (55% or Equivalent for
SC/ST candidates).
MNEC01
Electronics &
Communication
Engineering
Data Communication and Networking, Optical
Communication, Digital Signal Processing,
Image Processing, Mobile and ATM Networks,
Analog and Digital Circuits.
M.Tech or Equivalent degree in Electrical
Engineering, Electronics and Communication
Engineering and Electronics Electrical Engineering,
Electronics Engineering and Communication
Engineering With 60% marks (55% or Equivalent for
SC/ST candidates).
79
Code Department Fields of Specialization Minimum Qualification
MNME01 Mechanical
Engineering
Thermal Sciences (Heat Transfer, Energy
Conversion, Refrigeration and Air-
conditioning), Turbo machines, CAD/ CAM/
FMS, Fatigue and Fracture Mechanics,
Unconventional Manufacturing Processes,
Metal Cutting. Metal Forming, Noise and Vib
rations, Industrial Engineering Rapid Prototyping
and Reverse Engineering, Knowledge
Management.
M.Tech or Equivalent degree in Mechanical,
Aeronautical, Automobile, Chemical, Production,
Metallurgical Engineering, Industrial Engineering.
With 60% marks (55% or Equivalent for SC/ST
candidates).
MNCH01 Chemical Engineering
Separation Process, Heat Transfer, Mass
Transfer, Chemical Reaction Engineering,
Modeling and Simulation, CFD, Energy
Conversion.
M.Tech or Equivalent degree in Chemical
Engineering, Petroleum Studies, Environment,
Biotechnology. With 60% marks (55% or Equivalent
for SC/ST candidates).
MNCY01 Chemistry
Organic – Metallic Material Chemistry,
Polymer Chemistry, Environmental Chemistry,
Nano Technology, Nano Chemistry, Bio-
Inorganic, Photo-Chemistry, Drug Delivery,
Co-ordination Chemistry.
M.Sc. in Chemistry/ Applied Chemistry With 60%
marks (55% or Equivalent for SC/ST candidates ) For
interdisciplinary Field of Research Master degree in
any Discipline of Science with 60% marks B.Tech
75% marks (70% or Equivalent for SC/ST candidates).
MNHS01 Humanities and Social
Science
Commonwealth Literature, Psychology,
Organizational Behavior, Social Psychology,
Entrepreneurship, British /literature, American
Literature, English Language Speaking and
Human Recourses Management, Rural
Economics, Allied Social Science, Accounting
and Financial Management.
M.A in English or Psychology/ MBA/MSW With 60%
aggregate marks or Equivalent CPI (55% or
Equivalent for SC/ST Candidates).
MNPH01 Physics
Condensed Matter Physical/ Solid State
Physics, Solid State Gas Sensors, Carrier
Transport in Thin Films, Interface States Studies
in Semiconductor Device, Characterization of
Material, Nonlinear Dynamics, Spectroscopy
of Nano- Materials and CNTs, Quantum
Chemistry & Bio- Physics, Magnetic Material,
Solar Photovoltaic’s.
M.Sc. in Physics/ M.Tech in appropriate branch of
Engineering or With 60% aggregate marks or
Equivalent CPI (55% or Equivalent CPI for SC/ST
Candidates).
MNMG01 School of Management
Studies
Marketing, Human Resource, Finance, Systems
Management, Strategic Management,
Operations Management, Operations
Management, International Business.
Master Degree in Management/ Technology/
Engineering/ Economics/ Commerce/ Science/
Computer Applications/ Social Science with minimum
of 60% marks or equivalent (55% or Equivalent for
SC/ST candidates) or Bachelor degree in Engineering
with a minimum of 75% marks or equivalent CPI
(70% or equivalent for SC/ST candidates).
MNGI01 GIS Cell Geoinformatics (Core and Application )
M.Tech or equivalent in GIS & Remote Sensing/ Civil
Engineering/ Computer Science & Engineering/
Information Technology/ Agricultural Engineering/
Mining Engineering or M.Sc. degree in GIS & Remote
Sensing/ Applied Geology/ Geophysical/ Geography/
Environmental Science/ Computer Science or degree
in Master of Computer Application. With 60% marks
(55% or Equivalent for SC/ST candidates).
Where the eligibility qualification is Master’s degree in Science or Commerce or Economics or English or any Subject of Humanities or Life Science or
Management qualifying NET is must for getting Institute fellowship as per Letter F.No. 25-2/2010-TS.II, dated 30.09.2010 and subsequent modification
which may be issued by MHRD from time-to-time.
Important Note:
Only deserving candidates with B.Tech/MCA or equivalent degree with 75% aggregate marks or equivalent (70% or equivalent for SC/ST
candidates), may be considered for admission to Ph.D. programmes as mentioned above.
Number of seats in each department will depend upon the availability of Supervisor in the department.
Preference will be given to SC/ST candidates otherwise found eligible.
80
37. National Institute of Foundry and Forge Technology, Hatia, Ranchi – 834 003 - NF
Code Department Fields of Specialization Minimum Qualification
NFME01 Manufacturing
Engineering
Machining Science, Metal Forming,
Mechanical behaviour of metals,
Computational Metrology, CAD/CAM,
Reliability and safety Engg, Mechanical
Design, Welding Technology, Industrial Engg,
Quality Control, Additive Manufacturing,
Mechanical system design.
M.Tech./ M.E./ M.Sc Engineering in Manufacturing
Engineering, Manufacturing Science, Production
Engineering, Industrial Engineering, Mechanical
Engineering, Mechanical Design, Welding
Technology, CAD/CAM.
NFMT01 Metallurgical and
Materials Engineering
Physical Metallurgy, Extractive Metallurgy,
Composite materials, Nano Materials, Welding
Metallurgy, Mechanical Metallurgy, Surface
Engineering, Corrosion Engineering, Powder
Metallurgy, Solidification.
M.E./ M.Tech or its Equivalent from recognized
institute/ university in Metallurgy & Materials
Engineering, Mechanical, Production, Manufacturing
Engineering and allied disciplines with a least 6.5
CGPA (or 60% marks) in aggregate.
38. National Institute of Technology, Agartala (Tripura) – 799 046 - NA
Code Department Fields of Specialization Minimum Qualification
NAME01 Mechanical Engineering
Thermal Science & Engineering
Manufacturing Science & Engineering
Machine Design
Automotive Engineering.
Master’s Degree in Engineering/ Technology or equivalent in an appropriate area with a minimum
CGPA of 6.5 out of 10 or equivalent (60% of marks)
Or
Bachelor’s degree in Engineering/ Technology with
an excellent academic record and with CGPA of at
least 9.0 out of 10 (85% of Marks). Candidates must have valid GATE score.
NAEC01 Electronic &
Communication Engineering
VLSI Communication Engineering.
Master’s Degree in Engineering/ Technology or
equivalent in an appropriate area with a minimum
CGPA of 6.5 out of 10 or equivalent (60% of marks)
Or
Bachelor’s degree in Engineering/ Technology with an excellent academic record and with CGPA of at
least 9.0 out of 10 (85% of Marks). Candidates must
have valid GATE score.
NAEE01 Electrical Engineering
Power System Engineering
Power Electronics & Drives
Instrumentation
Integrated Energy System
Non Linear Optics.
Master’s Degree in Engineering/ Technology or equivalent in an appropriate area with a minimum
CGPA of 6.5 out of 10 or equivalent (60% of marks)
Or
Bachelor’s degree in Engineering/ Technology with
an excellent academic record and with CGPA of at
least 9.0 out of 10 (85% of Marks). Candidates must have valid GATE score.
NAPE01 Production Engineering
Welding
Foundry and Metal Casting,
Application of Soft Computing Technique
Metal Forming and Foundry
Composite Material
I C Engine
Alternative Fuel
Multi –criteria Decision Making
Adv. Fluidics
Case Based Reasoning
Master’s Degree in Engineering/ Technology or
equivalent in an appropriate area with a minimum CGPA of 6.5 out of 10 or equivalent (60% of marks).
Or
Bachelor’s degree in Engineering / Technology with an excellent academic record and with CGPA of at
least 9.0 out of 10 (85% of Marks). Candidates must
have valid GATE score.
NACE01 Civil Engineering
Structural Engineering
Transportation Engineering
Geotechnical Engineering
Environmental Engineering
Water Resource Engineering
Master’s Degree in Engineering/ Technology or
equivalent in an appropriate area with a minimum
CGPA of 6.5 out of 10 or equivalent (60% of marks).
Or
Bachelor’s degree in Engineering / Technology with
an excellent academic record and with CGPA of at least 9.0 out of 10 (85% of Marks). Candidates must
have valid GATE score.
81
39 National Institute of Technology Calicut, Calicut 673 601 – CL
M.Tech. Degree in Engineering/Technology in the appropriate branch of study with first class or minimum 60% marks (CGPA 6.5/10) in aggregate of all
semesters [For SC/ST candidates, the minimum mark is 55% (CGPA 6.0/10)].
Candidates shall be required to have passed the four-year regular full time B.E./B.Tech. Degree in an appropriate branch with minimum 60% marks
(CGPA 6.5/10) in aggregate in the qualifying examination. [For SC/ST candidates 55% marks (CGPA 6.0/10)].
Candidates under lateral entry should have passed the three year diploma in engineering with minimum 60% marks [For SC/ST candidates 55% marks
(CGPA 6.0/10)].
Code Department Fields of Specialization Minimum Qualification
CLCE01 Civil Engineering
Structural Engineering; Structural Engineering.
Offshore Structures. Offshore Structures/ Structural Engineering/ Ocean
Engineering/ Coastal Engineering.
Traffic & Transportation Planning.
Transportation Engineering/ Highway Engineering/
Traffic & Transportation Planning/Urban
Engineering.
Geotechnical Engineering. Geotechnical Engineering/ Environmental
Geotechnology.
Water Resources Engineering. Water Resources Engineering/ Environmental
Geotechnology.
Environmental Engineering. Environmental Engineering/ Environmental
Geotechnology.
Building Sciences. Building Technology/ Construction Engineering/
Construction and Management/Structural Engineering.
Town Planning. Town Planning /Urban Design/Architecture.
CLEE01 Electrical Engineering
Instrumentation and Control Systems. Electrical Engineering/ Power Systems/ Energy
Systems/ Energetic/ Industrial Power/ Industrial
Power & Automation/ Power Electronics/ Power
Electronics& Drives/ Control Systems/
Instrumentation and Control Systems/
Instrumentation Engineering/ Applied Electronics
and Instrumentation/ Biomedical Engineering/
Computer Controlled Industrial Power/ Avionics
Engineering/ Guidance and Navigation Control/ High
Voltage Engineering/ Contro and Automation.
Power and Energy Systems.
Power Electronics & Machines.
Industrial Power & Automation.
Biomedical Instrumentation and Signal Processing.
High Voltage Engineering.
CLEC01 Electronics and
Communication Engineering
Communication & Networking
Signal Processing
Micro-electronics & VLSI
Electronic System Design.
Electronics/ Electronics Design & Technology/
Communication/ Microelectronics & VLSI Design/
Electronics & Communication/ Telecommunication/
Signal Processing/ Applied Electronics.
CLME01 Mechanical Engineering
Industrial Engineering and Management. Industrial Engineering Streams.
Thermal Sciences. Thermal Engineering Streams.
Manufacturing Technology. Manufacturing Technology/
Production Engineering and allied Streams.
Energy Engineering and Management. Energy Engineering Streams.
Materials Science and Technology. Materials Science and Technology Streams.
Machine Design. Machine Design Streams
82
40. National Institute of Technology, Durgapur (West Bengal) - 713 209 - ND
Code Department Fields of Specialization Minimum Qualification
NDBT01 Biotechnology
Microbial biotechnology, food bio-technology,
environmental bio-technology, nano-
biotechnology, Bioprocess engineering, Bio-
fuels, Heavy metal removal, fermentation.
M. Tech./ M.E / M. Pharm /M Sc in relevant discipline
with at least 6.5 CGPA or 60 percent marks in
aggregate in the M.E./ M. Tech. level or B. Tech/ B.E.
/ B Pharm in relevant discipline with at least 7.5 CGPA
or 70 percent from a recognized technical institute or
university/ government open university.
NDCH01 Chemical Engineering
Environment, Energy, Membrane Technology,
Biochemical Reaction Engg, Multi-phase Flow,
Transport Phenomena.
M.Tech./ M.E.in relevant discipline with at least 6.5
CGPA or 60 percent marks in aggregate in the M.E./
M.Tech. Level in relevant discipline or B.Tech/ B.E.
in relevant discipline with at least 7.5 CGPA or 70
percent from a recognized technical institute or
university/ government open university.
NDCE01 Civil Engineering
Structural Engineering, Geotechnical
Engineering, Water Resources Engineering,
Environmental Engineering, Remote Sensing &
GIS, Transportation Engineering.
NDCS01 Computer Science &
Engineering
Big data analysis, integrity and migration in
Chip Multiprocessors.
NDEC01 Electronic &
Communication Engineering
Antenna/ Digital Signal processing/ MEMS/
Nanoscale Semiconductor Devices/ Power Line
Communication/ Resistive Memory Devices/ RF and Microwave Engineering/
Semiconductor Process Technology/
Underwater Acoustic Communication/ VLSI/ Wireless Communication/ Wireless relays and
space-time coding.
NDEE01 Electrical Engineering
Power Systems, Power Electronics & Machine
Drives, Control Systems, High Voltage
Engineering, Instrumentation & Control.
NDME01 Mechanical
Engineering
Tribology, Fluid Mechanics, CFD, Micro
Fluidics, Simulation and Modelling of pipe line
network.
NDMT01 Metallurgical &
Materials Engineering
Process Metallurgy/ Ferrous Processing/
Physical Metallurgy/ Heat Treatment and Phase
Transformation/ Mechanical Metallurgy/
Aqueous and High Temperature Corrosion/
Powder Metallurgy/Composites and Ceramics/
Materials Characterization/ Simulation and
Modelling in Materials.
M.Tech/ M.E.in relevant discipline with at least 6.5
CGPA or 60 percent marks in aggregate in the M.E./
M.Tech. Level in relevant discipline or B.Tech/ B.E. in
relevant discipline with at least 7.5 CGPA or 70
percent from a recognized technical institute or
university/ government open university.
41. National Institute of Technology, Hamirpur (Himachal Pradesh) – 177 005 - NH
Code Department Fields of Specialization Minimum Qualification
NHCE01 Civil Engineering
Structural Engineering
Hydraulics
Geotech & foundation
Environmental Engineering
Transportation
Remote Sensing.
Master Degree in Engineering /Technology/ in
appropriate discipline with CGPI of 6.5 on a 10-point
scale (or equivalent) or 60% marks in case of
Open/OBC candidates in qualifying degree. Whereas
in case of SC/ST candidates a CGPI of 6.0 on a 10-
point scale (or equivalent) or 55% marks in qualifying
degree will be applicable.
NHCS01 Computer Science
Engineering
Mobile Computing
Distributed Systems
Computer Networks
Soft computing
Artificial Intelligence.
Master Degree in Engineering /Technology/ in
appropriate discipline with CGPI of 6.5 on a 10-point
scale (or equivalent) or 60% marks in case of
Open/OBC candidates in qualifying degree. Whereas
in case of SC/ST candidates a CGPI of 6.0 on a 10-
point scale (or equivalent) or 55% marks in qualifying
degree will be applicable.
83
Code Department Fields of Specialization Minimum Qualification
NHME01 Mechanical Engineering
Design
Thermal
Production
Industrial.
Master Degree in Engineering /Technology in
appropriate discipline with CGPI of 6.5 on a 10-point
scale (or equivalent) or 60% marks in case of
Open/OBC candidates in qualifying degree. Whereas
in case of SC/ST candidates a CGPI of 6.0 on a 10-
point scale (or equivalent) or 55% marks in qualifying
degree will be applicable.
NHEE01 Electrical Engineering
Power Systems
Signal Processing and Control
Power Electronics
Condition monitoring of power transformers &
protection of power apparatus.
Master Degree in Engineering /Technology in
appropriate discipline with CGPI of 6.5 on a 10-point
scale (or equivalent) or 60% marks in case of
Open/OBC candidates in qualifying degree. Whereas
in case of SC/ST candidates a CGPI of 6.0 on a 10-
point scale (or equivalent) or 55% marks in qualifying
degree will be applicable.
NHEC01
Electronics and
Communication
Engineering
VLSI Design
Communications systems and networks
MEMS Design
Microwave and RF design.
Master Degree in Engineering /Technology in
appropriate discipline with CGPI of 6.5 on a 10-point
scale (or equivalent) or 60% marks in case of
Open/OBC candidates in qualifying degree. Whereas
in case of SC/ST candidates a CGPI of 6.0 on a 10-
point scale (or equivalent) or 55% marks in qualifying
degree will be applicable.
NHEN01 Energy & Environment
Engineering
Energy Technology, Environmental
Engineering.
Master Degree in Engineering /Technology in Energy,
Mechanical, Electrical, Electronics & Comm., Civil,
Environment, Chemical discipline with CGPI of 6.5 on
a 10-point scale (or equivalent) or 60% marks in case
of Open/OBC candidates in qualifying degree.
Whereas in case of SC/ST candidates a CGPI of 6.0 on
a 10-point scale (or equivalent) or 55% marks in
qualifying degree will be applicable.
42. National Institute of Technology, Raipur, Chhattisgarh-492 010 - NR
Code Department Fields of Specialization Minimum Qualification
NRWI01 Civil Engineering Water Resources Development and Irrigation
Engineering.
M.E./M.Tech. or equivalent in an appropriate area
with a minimum 60% of marks or 6.5/10 CGPA/CPI at Master’s degree.
43. National Institute of Technology Rourkela, Rourkela- 769 008 – RK
Minimum eligibility is Masters degree in Engineering Technology with at least 60% marks in aggregate.
Code Department Fields of Specialization Minimum Qualification
RKCM01 Ceramic Engineering Ceramic Engineering
B.E./ B.Tech./ M.Sc. in relevant discipline with minimum 65% marks in aggregate or 7.0CGPA.
OrM.E./M.Tech. in relevant discipline with at least
60 percent marks in aggregate (or 6.5 CGPA) at both B.Tech./(or M.Sc.) and M.Tech. Levels.
RKCH01 Chemical Engineering Chemical Engineering
RKEC01 Electronics & Communication
Engineering
Telematics & Signal Processing
RKEC02 VLSI Design & Embedded System
RKEE01 Electrical Engineering Power Control & Drives
RKME01
Mechanical Engineering
Experimental Stress Analysis
M.E./ M.Tech in Mechanical Engineering With at
least 60% marks in aggregate.
RKME02 Vibration
RKME03 Plastic Deformations of Metals
RKME04 Heat Transfer
RKME05 Cryogenics
RKME06 Finite Element Techniques
RKME07 Computer Aided Design
RKME08 Computer-aided Manufacturing
RKME09 Automation & Robotics
84
Code Department Fields of Specialization Minimum Qualification
RKMM01 Metallurgical & Materials
Engineering Metallurgy & Materials Engineering.
M.E./M.Tech. in Material Engineering/ Science or
Met. Engineering or Mechanical Engineering. or
Chemical Engineering or Ceramic Engineering With
60% marks in aggregate.
RKMI01 Mining Engineering Mining Engineering.
B.E./ B.Tech / M.Sc. in relevant discipline with
minimum 65% marks in aggregate or 7.0CGPA. Or M.E./ M.Tech. in relevant discipline with at least 60
percent marks in aggregate (or 6.5 CGPA) at both B.Tech./(or M.Sc.) and M.Tech. Levels.
44. National Institute of Technology, Silchar (Assam) – 788 010 - NS
Code Department Fields of Specialization Minimum Qualification
NSCE01 Civil Engineering
Structural Engineering
Water Resource Engineering
Earthquake Engineering
Geotechnical Engineering
Environmental Engineering
Transportation Engineering.
(i) M.E./M.Tech. or equivalent in an appropriate
area with a minimum CPI of 6.5 (on a 10 point
scale) or equivalent (60% of marks). For SC/ST candidates, a minimum CPI of 6.0 (on a 10
point scale) or equivalent (55% of marks).
(ii) B.E./B.Tech. with an excellent academic record and with a CPI of at least 8.0 (on 10 point scale)
or equivalent (75% of marks). For graduate
from IITs/NITs, the minimum CPI requirement is 7.0 (on 10 point scale). For SC/ST
candidates, there is a relaxation of 0.5 CPI or
5% of marks.
NSCS01 Computer Science &
Engineering
Image Processing
Speech Processing
NLP
Soft Computing Techniques and Applications
Machine Intelligence.
(i) M.E./M.Tech or equivalent in an appropriate
area with a minimum CPI of 6.5 (on a 10 point
scale) or equivalent (60% of marks). For SC/ST
candidates, a minimum CPI of 6.0 (on a 10
point scale) or equivalent (55% of marks).
(ii) B.E./B.Tech with an excellent academic record
and with a CPI of at least 8.0 (on 10 point scale)
or equivalent (75% of marks). For graduate
from IITs/NITs, the minimum CPI requirement
is 7.0 (on 10 point scale). For SC/ST
candidates, there is a relaxation of 0.5 CPI or
5% of marks.
NSEE01 Electrical Engineering
Renewable Energy Generation & Control
(Wind and Solar Photo-voltaic)
Power Electronics Distributed Generation and Control
Electrical Machine Drives
Power Quality Power System Reliability
Smart Grid
Power System Planning, Congestion
management, Networking Pricing
CNT and Carbon Nanowire Interconnects Application of Signal and Image Processing
Grid Power and Bus Management
Renewable Energy and its Applications Application of Microprocessor/Microcontroller
Application of Soft-Computing in Engineering
Applications Control Systems Fault detection and diagnosis of dynamical
systems
Industrial Automation Power System Economics
Automatic Generation Control
Image Processing Power System Protection.
(i) M.E./M.Tech or equivalent in an appropriate
area with a minimum CPI of 6.5 (on a 10 point
scale) or equivalent (60% of marks). For SC/ST
candidates, a minimum CPI of 6.0 (on a 10 point
scale) or equivalent (55% of marks).
(ii) B.E./B.Tech with an excellent academic record and with a CPI of at least 8.0 (on 10 point scale)
or equivalent (75% of marks). For graduate
from IITs/NITs, the minimum CPI requirement is 7.0 (on 10 point scale). For SC/ST candidates,
there is a relaxation of 0.5 CPI or 5% of marks.
85
Code Department Fields of Specialization Minimum Qualification
NSEC01 Electronic &
Communication Engineering
Microelectronics & VLSI Design Semiconductor Device, Modelling and
Simulations
MEMS-CMOS Co-design related to Spectrum Sensing in Wireless Technology
Digital System Design
Signal Processing Communication Engineering
Power Electronics
Ad-hoc & Sensor Networks.
(i) M.E./M.Tech or equivalent in an appropriate
area with a minimum CPI of 6.5 (on a 10 point scale) or equivalent (60% of marks). For SC/ST
candidates, a minimum CPI of 6.0 (on a 10
point scale) or equivalent (55% of marks). (ii) B.E./B.Tech with an excellent academic record
and with a CPI of at least 8.0 (on 10 point scale)
or equivalent (75% of marks). For graduate from IITs/NITs, the minimum CPI requirement
is 7.0 (on 10 point scale). For SC/ST
candidates, there is a relaxation of 0.5 CPI or 5% of marks.
NSME01 Mechanical Engineering
Thermodynamics, Heat Transfer,
Computational Heat Transfer, Computational
Fluid Dynamics, Combustion Refrigeration &
Air Conditioning, Alternate Fuels, Solar
Energy, Wind Turbines, Hydraulic Turbines,
Spray Combustion, Conventional Energy, Tribology, Fracture Mechanics, Stress
Analysis, Vibration, Micro-machining
Advanced Manufacturing Processes Engineering Materials Virtual Manufacturing,
Composites.
(i) M.E./M.Tech or equivalent in an appropriate
area with a minimum CPI of 6.5 (on a 10 point
scale) or equivalent (60% of marks). For SC/ST
candidates, a minimum CPI of 6.0 (on a 10 point
scale) or equivalent (55% of marks).
(ii) B.E./B.Tech with an excellent academic record
and with a CPI of at least 8.0 (on 10 point scale)
or equivalent (75% of marks). For graduate from IITs/NITs, the minimum CPI requirement
is 7.0 (on 10 point scale). For SC/ST candidates,
there is a relaxation of 0.5 CPI or 5% of marks.
45. National Institute of Technology (NIT)-Srinagar-190 006, Jammu and Kashmir- NJ
Code Department Fields of Specialization Minimum Qualification
NJCE01 Civil Engineering
Structural Engineering:
Structural Engineering, Earthquake Engineering, Finite Element Analysis,
Concrete Technology, Tall Buildings, Civil
Engineering. Matls, Reinforced Concrete.
Water Resources Engineering: Hydraulic Structures and Water Resource
Engineering, Hydrology and Water Resource
Engineering, Sediment Transport, Environment and Water Resources
Engineering, Hydrology and Hydraulic
Structures, Fluvial Hydraulics.
Transportation Engineering: Pavement Engineering, Traffic Engineering &
Transportation Planning.
Geotechnical Engineering: Geotechnical Engineering, Soil Dynamics, Ground Improvement Techniques.
Geology
Engineering Geosciences and Rock Engineering.
M.E./ M.Tech in relevant field of Engineering with
a minimum CGPA of 6.5 or not less than 60% for
General Category and for SC/ST/OBC minimum
CGPA of 6.0 or not less than 55% marks at Master’s
level or any other equivalent qualification
recognized by the Institute.
OR
B.E./ B.Tech with valid GATE score above the
prescribed cut off level/ NET Qualification. The
candidates shall have a minimum CGPA of 8.0 or
not less than 75% for General Category/OBC and
for SC/ST minimum CGPA of 7.5 or not less than
70% at BE/B Tech level.
FOR GEOLOGY
Master’s degree in Applied Geology/Earth
Sciences or an allied area, satisfying each of the
following criteria:
a) A minimum of 65 percent marks/6.5 CPI in the
master’s degree.
b) First division in bachelor’s degree and
c) With a valid Gate score or UGC/ CSIR NET/
NBHM or equivalent qualification in the
relevant area tenable for the year of registration.
NJEE01 Electrical Engineering
Power System Dynamics & Control, Stand
Alone Power System, Application of Energy
Storage Devices to Power Systems, Power
Systems Operation & Optimization, Flexible
AC Transmission System. Energy System
Planning & Auditing, Wind Energy
Conversion Systems, Power Electronics
,Power Quality, Electric Drives, Power
System Control, Control Theory, Model Order
Reduction, Finite Element Modelling of
Distributed Parameter System.
M.E./M.Tech in relevant field of Engineering with
a minimum CGPA of 6.5 or not less than 60% for
General Category and for SC/ST/OBC minimum
CGPA of 6.0 Or not less than 55% marks at
Master’s level or any other equivalent qualification
recognized by the Institute.
OR
B.E./B.Tech with valid GATE score above the
prescribed cut off level/NET Qualification. The
candidates shall have a minimum CGPA of 8.0 or
not less than 75% for General Category/OBC and
for SC/ST minimum CGPA of 7.5 or not less than
70% at BE/B Tech level
86
46. National Institute of Technology Karnataka, Surathkal 575 025 – SK
Admission to Ph.D programme shall be open to Indian Nationals who passes the qualifying degree in relevant field with a Cumulative Grade Point
Average (CGPA) of at least 6.0 in the 0-10 scale grading system, or not less than 60% marks in the aggregate (taking into account the marks scored
in all the subjects of all public/university examinations conducted during the entire prescribed period for the qualifying degree). However, this
prescribed minimum shall be a CGPA of 5.5 or 55% marks in the aggregate for SC/ST/PwD candidates. The prescribed qualifying examination is as
follows:
i. For Ph.D in Engineering/Technology – Master’s degree in relevant field
ii. For Ph.D in Science – Master’s degree in relevant field
iii. For Ph.D in Humanities, Social Science & Management – Master degree in relevant field, CA along with undergraduate degree.
If the evaluation system in qualifying degree is in both CGPA and Marks, CGPA value will be considered. Also Conversion from Grade point system
to Percentage system will not be considered.
Code Department Fields of Specialization Minimum Qualification
SKAM01
Applied Mechanics and Hydraulics
Marine structures/ Coastal Engineering/ Ocean Engineering.
Master’s degree in Civil/ Marine/ Structures/ Ocean/ Offshore/ Coastal Geotechnical/ Soil Mechanics/ Structural/ Hydraulics/ Environmental/Applied Mechanics/ Remote Sensing/ GIS/ Geo-informatics.
SKAM02 Hydraulics Engineering/ Water Resources Engineering.
Master’s degree in Civil/ Hydraulic/ Water Resources/ Aerospace/ Agricultural/ Ocean/ Environmental/ Coastal Engineering/ Remote Sensing/ GIS.
SKAM03 Remote Sensing & GIS. Master’s degree in Civil/ Hydraulics/ Water Resources/ Aerospace/ Agricultural/ Ocean/ Environmental/ Coastal Engineering/ Remote Sensing/ GIS. SKAM04
Water Resources Engineering & Management,
Marine Structures & Coastal Engineering, RS &
GIS Applications.
SKCE01
Civil Engineering
Structural Engineering M.E./ M.Tech/ M.Sc.(Engineering) in Structural Engineering or related areas.
SKCE02 Geotechnical Engineering.
M.E./ M.Tech./ M.Sc. (Engg.) in Geotechnical
Engineering (Soil Mechanics and foundation
Engineering) or any other related fields.
SKCE03 Transportation Engineering, Environmental
Engineering, Construction Technology &
Management.
M.E./ M.Tech./ M.Sc. (Engineering) in the relevant
Civil Engineering disciplines or related areas.
NJEC01
Electronics &
Communication
Engineering
Image Processing, Wireless Networks,
Biometrics, Analog and Digital
Communication, Optical Fiber
Communication, Opto Electronic Devices,
Microwave and Radar Engineering, Analog
and Digital VLSI Design, Device modelling
and Simulation, Novel MOS Devices for
ULSI application. Molecular Nanosciences
and Electronics. Computer Networks, Data
and Computer Networks, Security, Sensor
Networks, Data Communication, Embedded
System, Radio frequency IC Design, and
MOS Insulators, Digital Communication,
Photovoltiacs. Insulators. Semiconductor opto
–electronic devices, Optical Fiber
Communication Systems, Communication
System (RF domain).
M.E./M.Tech in relevant field of Engineering with
a minimum CGPA of 6.5 or not less than 60% for
General Category and for SC/ST/OBC minimum
CGPA of 6.0 Or not less than 55% marks at
Master’s level or any other equivalent qualification
recognized by the Institute.
OR
B.E./B.Tech with valid GATE score above the
prescribed cut off level/NET Qualification.
The candidates shall have a minimum CGPA of 8.0
or not less than 75% for General Category/OBC and
for SC/ST minimum CGPA of 7.5 or not less than
70% at BE/B Tech level.
NJME01 Mechanical Engineering
Computational Mechanics, FEM,Thermo
elasticity and Second Sound, Fracture
Mechanics and Material Fatigue, Tribology
and Maintenance Management, Tribology of
Advanced Ceramics & Nano Ceramics, Life
Cycle Engineering, Aircraft wing vibration,
Smart Structures, Internal Combustion
Engines, Combustion of Alternative Fuels,
Emission control, MEMS, Ultrasonic
Transducers, Dynamics and Control.
Experimental Fluid Mechanics, Heat
Transfer, Augmentation, Design of Thermal
Systems.
M.E./M.Tech in relevant field of Engineering with
a minimum CGPA of 6.5 or not less than 60% for
General Category and for SC/ST/OBC minimum
CGPA of 6.0 Or not less than 55% marks at
Master’s level or any other equivalent qualification
recognized by the Institute.
OR
BE/B.Tech with valid GATE score above the
prescribed cut off level/NET Qualification. The
candidates shall have a minimum CGPA of 8.0 or
not less than 75% for General Category/OBC and
for SC/ST minimum CGPA of 7.5 or not less than
70% at BE/B. Tech level.
87
Code Department Fields of Specialization Minimum Qualification
SKCH01 Chemical Engineering
Process Development, Particulate System,
Biotechnology, Environmental Engineering,
Transfer Operations, Industrial Biotechnology,
Energy, Electrochemical Applications, Process
Modeling & Simulation.
Master’s in Chemical Engineering/ Biotechnology/
Micro-biology/ Biochemistry or related fields.
SKCS01 Computer Engineering
Computer Science & Engineering, Software
Engineering, Communication Network,
Distributed Computing, Work Flow Software,
Grid Computing, Autonomic Computing, Data
Mining, Data Warehouse, Security of
Information, Bio-informatics, Bio-
informatics, High performance computing,
Computer vision, Cloud Computing, Image
Processing, Speed processing, Mobile
computing.
M.E./ M.Tech/ M.Sc. (Engineering) in Computer/
IT/ E&C/ Software Engineering/ Networks, with
B.E./ B.Tech./ B.Sc.(Engineering) in Computer/
E&C/IT/E&E.
SKEC01 Electronics and Communication Engineering
Communication/ VLSI Design/ Signal Processing.
Master’s Degree in Engineering/ Technology in the field of specialization.
SKEE01 Electrical and Electronics
Engineering
Energy Systems, Power Electronics & Drives, High Voltage Engineering, Power
Systems, Control Systems, Instrumentation
Engineering, Adaptive and distributed signal processing for sensing and Image applications;
Control system; Electrical Machines and
Machine Diagnosis; High voltage Engineering and field computations; Power Electronics &
Drives; Renewable Energy technologies; Smart
grid technologies.
Master’s Degree in Electrical Engineering or
relevant field.
SKHS01 Humanities, Social Sciences & Management
Management, Economics, English
(Comparative literature) and related
disciplines. Master’s in relevant field.
SKME01 Mechanical Engineering
Alternative Fuels, Heat Transfer, Advanced
Manufacturing, Mechatronics, IC Engine, &
Combustion, Heat Transfer, Refrigeration and
Air Conditioning, Fluid Dynamics, Fracture
Mechanics and Fatigue, Fluid Dynamics,
Machine Dynamics and Vibration, Advance
Materials, MEMS, Robotics and Control,
Stress Analysis, FEM, Renewable Energy,
Tribology, Product Design, Structural
Acoustics, Polymer Nano-Composites,
Precision Management.
M.E./ M.Tech/ M.Sc. (Engineering) in the relevant
field.
SKMI01 Mining Engineering Rock Mechanics and Ground Control, Drilling
and Blasting, Mine Planning, Environmental
Management.
Master’s degree in Mining Engineering or other
related fields such as Geo-technical Engineering,
Remote Sensing/GIS, Geoinformatics, Applied
Geology and Geophysics or related areas.
SKMT01 Metallurgical and Materials
Engineering
Mechanical processes, Chemical processes and
materials, Physical Metallurgy, Extractive
Metallurgy, Foundry, Welding, Metal
Forming, Corrosion, Powder Metallurgy and
Transport Phenomena, Surface Engineering,
Nano-Composites, Nano-fibers.
M.E./ M.Tech./ M.Sc. (Engineering.) in the relevant
field .
47. National Institute of Technology, Tiruchirappali- 620 015 - TR
Minimum Qualifications: Master’s Degree in Engineering/ Technology in appropriate branch with first class or minimum 60% marks (CGPA 6.5) or
equivalent in UG or PG. for SC/ST candidates a mere pass in UG and PG is sufficient.
Code Department Fields of Specialization Minimum Qualification
TREE01 Electrical and Electronics Engineering
Power Systems, Electrical Machines and
Power Electronics, VLSI, Control Systems
and Computer Science.
Master’s degree in Engineering/ Technology in
appropriate branch with first class or minimum
60% marks (CGPA 6.5) or equivalent in UG or PG.
For SC/ST candidates, a mere pass in UG and PG is
sufficient.
88
Code Department Fields of Specialization Minimum Qualification
TRMT01 Metallurgical & Materials Engineering
Processing of Newer Materials, Metal
Forming, Powder Metallurgy, Corrosion
Engineering, Welding Engineering, Process
Modeling, and Fracture Mechanics, Surface
Engineering, Geo Materials, Nano Materials,
Process Metallurgy, Quality management.
Master’s degree in Engineering/ Technology in
appropriate branch with first class or minimum
60% marks (CGPA 6.5) or equivalent in UG or PG.
For SC/ST candidates, a mere pass in UG and PG is
sufficient. Regular Admission to Ph.D. We consider
M.Sc. M.Tech also.
TRPE01 Production Engineering
Manufacturing: Mechatronics/ Robotics,
Micromachining, Surface Engineering, Tribology, Intelligent Manufacturing,
Composite Materials Processing, Advanced
Welding, Non-traditional Machining, Rapid Manufacturing.
Industrial Engineering: Simulation, Supply
Chain Management, Lean manufacturing,
Quality Engineering, Project Management, Industrial Engineering Management, Data
Analysis & Management, Optimization
Techniques, Resource Management.
Master’s degree in Engineering/ Technology in appropriate branch with first class or minimum
60% marks (CGPA 6.5) or equivalent in UG or PG. For SC/ST candidates, a mere pass in UG and PG is
sufficient.
TRCH01 Chemical Engineering
Transfer Operation, Process Control. Bio-Chemical Engineering/ Bio-Technology,
Reaction Engineering, Particle Technology, Energy and Environmental Engineering, Thermodynamics, Computer Aided Design,
Process Systems Engineering, Energy Engineering, Electrochemical Engineering, Polymer Engineering.
TRCV01 Civil Engineering Transportation Engineering & Management, Structural Engineering, Environmental Engineering, Geotechnical Engineering, GIS.
TRCS01 Computer Science &
Engineering
Computer Networks, Mobile Communication,
Image Processing, Data Mining, Grid and Cloud Computing, Digital Forensics, Network
Security, Wireless Networks.
TRIC01 Instrumentation &
Control
Mathematical Control Theory, Algorithms, Computational Complexity, Networked
Control Systems, Mobile Robotics-UGVs and
UAVs Estimation Theory, Kalman Filtering, Particle Filters, PIDS and Fractional Order
Controllers, MEMS, Smart Material and
Structures, Instrumentation Systems Control, Systems Design, Intelligent Control, Process
Control, System Identification and Multirate
Feedback Control, Biomedical Systems.
TRME01 Mechanical Engineering Thermal Science, Industrial Safety Design,
Machine Design.
48. National Institute of Technology Warangal, Warangal 506 004 - WR
Minimum qualification: First class Master's degree in the appropriate branch with a minimum of 60% marks in aggregate. In case of SC/ST/PD
Candidates, the Minimum aggregate marks is 55%.
Code Department Fields of Specialization Minimum Qualification
WRCH01 Chemical Engineering
Biomass Gasification, Fuel Cells, Plate Heat
Exchangers, Membrane processes, Bioreactors, Flow batteries, Reactive
Distillation, Chemical process scheduling,
Microfluidics, Multiphase flows, Interfacial Science, Chemical reactor analysis and design,
Wastewater Treatment, Sustainable and
energy efficient technologies, Micro Reactors, Process control, Process Intensification, Non
linear analysis, Nano materials, Computational
Fluid Dynamics, Fluidized Bet Operations, modeling & simulation, heat transfer,
Biochemical Engineering.
Master’s degree in Chemical Engineering or its
equivalent.
89
Code Department Fields of Specialization Minimum Qualification
WRCE01 Civil Engineering
Structural Dynamics & Earthquake
Engineering.
First class with not less than 60% in B.Tech. or B.E.
(or) not less than 6.5 CGPA on a 10 point scale in
any branch of Engineering & Technology
And
First Class with not less than 60% in M.Tech. or M.E.
(or) not less than 6.5 CGPA on a 10 point scale in
relevant specialization
And
Candidates who have obtained admission into
M.Tech./M.S. Programmes through GATE score (or)
who already possesses a valid GATE score.
Note: For SC/ST candidates Cumulative Grade Point
Average (CGPA) of at least 6.0 on a 10 point scale
grading system, or not less than 55% marks in
aggregate.
Construction Technology & Management.
Environmental Engineering.
RS & GIS.
Civil Engineering Materials.
Hydrology & Water Resources Engineering.
Transportation Engineering.
Geotechnical Engineering.
WRME01 Mechanical Engineering Thermal Engineering/ Manufacturing
Engineering/ Design Engineering. Master’s degree in Mechanical Engineering in the
concerned specialization.
WRMH01 Mathematics &
Humanities
Fluid Mechanics/ Numerical Analysis/ Operations Research/ Analysis/ Coding
theory. M.Sc. in Applied Mathematics/ Mathematics.
49. National Institute of Technical Teachers’ Training & Research (NITTTR), Kolkata-700106 - NK
Code Department Fields of Specialization Minimum Qualification
NKEE01 Electrical Engineering
Servo Private System, Instrumentation and
Control, Solar Photovoltaic System, Digital
and Robust Control, Robotics and
Automation.
Power Electronics and Drives, VLSI & Embedded
System, Control Systems and Industrial Automation,
Optical Commutation, Solar Energy, Electrical
Machines and Power System.
NKME01 Mechanical Engineering
Manufacturing Technology, Thermal
Engineering, CAD/CAM, Fluid Mechanics,
Materials and Composites, Welding
Technology, Design, Computational Fluid
Dynamics (CFD).
M.Tech in Mechanical/ Manufacturing/ Production/ Thermal/ Automobile/ Design/Fluid with First
division or equivalent.
NKCS01 Computer science
Engineering
Software Engineering/ Cloud Computing/
Computational Geometry/ Operations
Research/ Computational Intelligence/
Computational Biology/ Image processing.
B.Tech & M.Tech in Computer Science &
Engineering, Information technology, Multimedia
and software systems or equivalent, consistent with
research area of the DepartmentCandidate must have
1st class or 1st division or equivalent CGPA all
through.
NKCE01 Civil Engineering Structural Engineering, Geotechnical Engg,
Highway & Transportation Engineering. M.E./ M.Tech in Civil Engineering.
90
50. Netaji Subhas Institute of Technology, New Delhi - 110 078 - NN
Code Department Fields of Specialization Minimum Qualification
NNEC01
Electronic &
Communication Engineering
Analog Integrated Circuits and Signal processing; CMOS Analog circuits, Analog
VLSI, Statistical Signal Processing,
Electromagnetics, Gravitation, VLSI, Optical networks and Optical communication,
Wireless Communication, Digital Signal Processing (DSP), Statistical Signal
Processing, VLSI DSP.
Master’s degree in Engineering/ Technology in the
relevant discipline (as per the AICTE Gazette
notification dated April 28, 2017) securing 55% or
more marks in aggregate. A relaxation of 5% marks,
from 55% to 50%, may be allowed for those belonging
to SC/ST/OBC (non creamy layer)/ differently –abled
and other categories or candidates as per the decision
of the university Grants Commision from time to time.
For details, the candidate may refer ordinance VI-B of
University of Delhi.
NNCS01 Computer Engineering
In Information Retrieval, Data Mining, Soft
Computing, Software Engineering,
Reconfigurable Computing, Network Security, Computer Architectures, Machine Learning,
Internet and Web Technologies, Software
Testing, Mobile Computing, Image
Processing, Database, CAD of Embedded
systems, Parallel processing, Adaptive
Systems, Distributed Computing, Multi-Disciplinary applications Software
Engineering, Software Testing, Data
Warehouse, ADHOC Networks, Network Security, Opportunistic Networks.
NNIC01 Instrumentation &
Control Engineering
Power Electronics, Industrial Drives,
Intelligent Instruments, Artificial Intelligence,
Intelligent Control, Intelligent Modeling of Non-Linear Systems, Biometrics &
Bioinformatics, Intelligent instrumentation,
Intelligent Control of Shaker System, FPGA Applications in Instrumentation, Distillation
Process, Image Processing, Biomedical
Instrumentation, Electrical Drives, Power
Quality, AI Based Control Teaching, Power
Electronics, FACTS DSP based control of machines, renewable energy system, Process
Dynamics, V Control, Intelligent Process
Control, Robotics, Intelligent Control Systems, VLSI.
NNMP01 Manufacturing Processes
& Automation
Engineering
Manufacturing, CAD/CAM, Product Design,
Unconventional Machining Methods ECDM/ECM/DEM/USM etc, Super abrasive
grinding Technology, Artificial Intelligence,
Robotics Management, and Product Design.
NNBT01 Biotechnology
Industrial Enzymes, Bio-energy, Bio-
remediation & Novel Antimicrobial agents/ anticancer agents, Computational and
Structural Biology with emphasis on molecular
modelling and drug design.
51. PDPM Indian Institute of Information Technology Design & Manufacturing, Jabalpur (M.P.) - 482 005 - PD
Code Department Fields of Specialization Minimum Qualification
PDCS01 Computer Science &
Engineering
Software Engineering, Visual Cryptography,
Big Data Analysis, I/O Efficient Algorithms,
Soft Computing, Networking, Parallel Algorithms, Image Reconstruction, Biometrics,
Image Retrieval, Security, Cloud Computing,
Robotics and Automation, Computer Aided Design.
M.Tech./ M.E. in Computer Science & Engineering or
Information Technology or a similar discipline with
minimum of 65 percent marks OR a CPA/CGPA of 6.5
(on the Scale of 10.00
91
Code Department Fields of Specialization Minimum Qualification
PDEC01
Electronic &
Communication Engineering
Electronics & VLSI Design: Nano-electronics,
Low Power System Design, Device Simulation
and Modeling, SRAM Design; Control, Instrumentation and Power System:
Identification and Control of Processes, Mobile
Robot, Power Electronics, Power System Protection; Microwave and Communication
Engineering, Electromagnetics, Antenna
Design Fabrication and Testing, MMIC, Nanophotonics and Plasmonics, Wireless
Communication, Fiber optic Comm system;
Signal Processing: Multirate Signol Processing, Biomedical Signal Processing,
Filter Bank Designing and Application.
M.Tech./M.E. in Electronics/ Electronics &
Communication Engineering/ Electrical Engineering or
a similar discipline with minimum of 65 percent marks
OR a CPA/CGPA of 6.5 (on the Scale of 10.00).
PDME01 Mechanical Engineering
Mechanical Design, Vibrations, Fault
Diagnosis and Condition Monitoring of Machines, Non-liner Dynamics, Smart
Materials and Structures, Flapping Wing
MAV, Mechatronics and Robotics, Composite Materials. Advanced Machining, Hybrid
Machining, Dieless Forming, Additive
Manufacturing, CNC Machining, Geometry, Microfuidics, Thermal & Fluid engineering,
Heat Transfer, Product Design, Geometric
Modelling, Computational Support to Design, Knowledge-based Engineering Design, Supply
Chain Management, Operations Management.
M.Tech./ M.E. in Mechanical Engineering/ Production
Engineering/ Industrial Engineering/ Production and
Industrial Engineering or a similar discipline with
minimum of 65 percent marks OR a CPA/CGPA of 6.5
(on the Scale of 10.00)
52. Pondicherry Engineering College, Puducherry - 605 014 - PY
Code Department Area of Research Minimum Qualification
PYEC01 Electronic &
Communication Engineering
Wireless Communications and Wireless
Security, Signal Processing and Image
Processing for Communication, Bio-medical
Signal Processing, Wireless Networks,
Optical Networks, Cryptography and VLSI
System Design.
B.E./ B.Tech. degree in Electronics and
Communication Engineering and M.E/ M.Tech. degree
in Electronics/ Communication Systems/ Electronics
and Communication Engineering/ any related
specializations with an overall minimum aggregate of
60% of marks or equivalent in the qualifying
examination M.E./ M.Tech.
PYCS01 Computer Science & Engineering
Computer Networks, Software Engineering,
Software Architecture, Software Metrics and
Testing, Cloud Computing, Service Oriented
Architecture and Computing, Database
Systems, Data Mining and Warehousing,
Language Technology and Ontology, Internet
Technology, Distributed Systems, Digital
Image Processing , Data Compression,
Multimedia Technology, Artificial
Intelligence and Fuzzy Logic, Information
Security.
B.E./ B.Tech degree and M.E/ M.Tech degree in
Computer Science and Engineering or Information
Technology with a minimum of 60% marks.
PYEE01 Electrical & Electronics Engineering
Power systems, power electronics, machines
and electro magnetics, signal processing and
control, artificial intelligence and digital
control /estimation and renewable energy
systems.
B.E./ B.Tech degree in Electrical and Electronics
Engineering/ Electronics and Instrumentaion and M.E/
M.Tech degree in Electrical and Electronics
Engineering/ other related specializations with a
minimum of 60% of marks.
92
Code Department Area of Research Minimum Qualification
PYME01 Mechanical Engineering
Production Engineering, Thermal Sciences
and Engineering, CFD, design and simulation
of thermal systems, Renewable energy
sources, Materials and Manufacturing,
Modeling & Simulation studies in Mechanical
Engineering, Internal Combustion Engines,
Alternative Fuels, Heat Transfer and
Corrosion Engineering Design, FEA,
Tribology, Production Engineering,
Production/ Operations Management,
Computational Mechanics, Modeling &
Simulation in Manufacturing & Thermal
Systems, Internal Combustion Engines,
Refrigeration & Air Conditioning &
Renewable Energy Sources, Production
Engineering, Nano materials, Nano Coating,
Corrosion, Surface Engineering, Renewable
Energy Systems.
(a) B.E./ B.Tech. Degree in Mechanical Engineering
and M.E./ M.Tech. Degree in Mechanical Engineering/
other related specialization listed here, with a minimum
of 60% of marks. Energy Engineering/ Technology,
I.C. Engines, Thermal Engineering, Refrigeration &
A.C Engineering, Engineering Design, CAD,
CAD/CAM, Product Design and Manufacturing,
Manufacturing Engineering, Production Engineering,
Foundry Engineering, Welding Technology, Logistics
and SCM
(b) M.E./ M.Tech Degree in other branch of
Engineering With a minimum of 60% of marks with
specialization in Chemical Engineering, Ocean
Engineering Nano Science and Technology, Industrial
Engineering/ Management, Environmental
Engineering, structural Engineering, Industrial
metallurgy, automobile Engineering, Aero space
Engineering, Material science and Engineering.
PYCE01 Civil Engineering
Structural Engineering, Geotechnical
Engineering, Industrial Waste Management &
Environmental Engineering, Soil Mechanics
& Foundation Engineering, Hydraulics &
Water Resources Engineering.
a) B.E./ B.Tech. degree and M.E./ M.Tech. degree in
Civil Engineering with a minimum of 60% of marks
or equivalent with specialization in:
i) Structural Engineering
ii) Geotechnical Engineering
iii) Hydraulic & Water Resource Engg.
iv) Ocean Engineering
v) Environmental Engineering/ Environmental
Technology/ Advanced Construction Technology
vi) Geo informatics
b) B.E./B.Tech degree and M.E./ M.Tech degree with
a minimum of 60% or equivalent with specialization
in Energy Technology/ Environmental Engineering/
Environmental Management.Biotechnology/
Chemical Engineering/ Industrial/ Biotechnology.
53. PSG College of Technology, Coimbatore 641 004 - PS
Code Department Fields of Specialization Minimum Qualification
PSME01 Mechanical Engineering
Machine Design, Finite Element Analysis,
CAD/CAM, Automobile Engineering,
Composite materials, Rapid Prototyping, Heat
Power Engineering, Fluid Power Control &
Automation, Energy Engineering, Simulation,
Operations Management, Metal Forming,
Casting Welding, Injection Molding,
Precision Engineering Tolerance Engineering,
Computer Aided Engineering, Smart Systems,
Vibration & Noise Engineering, Product Life
Cycle Management, Reliability Engineering,
Machine Tool Design Safety Engineering,
Innovation & Creativity, Value Engineering,
Concurrent Engineering, Pneumatics,
Manufacturing, Instrumentation, DFMA,
TPM, Tribology, Ergonomics & Industrial
Design, Refrigeration & Air Conditioning,
Nano Technology.
A Master’s degree in Mechanical Engineering/
Production Engineering.
93
Code Department Fields of Specialization Minimum Qualification
PSPE01 Production Engineering
CAD/ CAM, Laser Material Processing, Fluid
Power Control and Automation, Industrial Engineering, Value Engineering, Systems
Engineering, Total Quality Management,
Agile Manufacturing, Innovative Management, Metal Forming, Concurrent
Engineering, Manufacturing Systems
Analysis, Virtual Manufacturing, Lean Manufacturing, Precision Manufacturing,
Product Data Management, Product Life Cycle
Management, Product Development, Metal Casting Injection Molding, Tool Design (Jigs
& Fixtures), Welding. Management, Metal
Forming, Concurrent Engineering, Manufacturing, Systems Analysis, Virtual
Manufacturing, Lean Manufacturing,
Precision Manufacturing, Product Data Management, Product Life Cycle
Management, Product Development, Product
Reliability, Metal Casting, Injection Moulding, Tool Design (Jigs & Fixtures),
Welding.
A Master’s degree in Mechanical Engineering/
Production Engineering.
PSAU01 Automobile Engineering
Engine Manufacturing System, Alternate
fuels/ Fuel Cells, Automotive materials, Solar
Power Vehicles, Electric and Hybrid Vehicles,
Automotive Acoustics, Product Life Cycle
Management, IC Engines.
A Master’s degree in Automobile Engineering/
Mechanical Engg./ Production Engineering.
PSEC01
Electronics and
Communication Engineering
RF and Microwave antennas, RF MEMS,
Wireless Communication, Image Processing, Signal Processing, Speech signal Processing,
VLSI Design, Networking, Wireless Sensor Networks Communication, Nano Technology
and related domain, Embedded Systems,
Wireless Security.
A Master’s degree in any of the following
specializations:
Communication Systems,
Wireless Communication,
Applied Electronics,
Electrical Machines,
Power Electronics & Drives,
Embedded and Real Time systems, Computer Science
and Engiineering, Nanotechnology
PSBT01 Bio-technology
Human Genetics, Neuroscience, Cancer and Computation biology, Plant Molecular
Biology and Biotechnology, Bio Process and
Molecular Biology, Clinical Biotechnology & Microbiology, Environmental biotechnology,
Plant Biotechnology, Biofuels and Biomass Energy.
A Master’s Degree (M.Tech or M.Sc) in the relevant
field
PSBM01 Bio-medical Engineering
Medical Image Processing & Analysis
includes quantitative analysis and
visualization of medical images. BioSignal
Processing & Analysis includes HRV (Heart
rate Variability ) analysis, EEG analysis etc.
Medical Instrumentation applications include
Equipments used in the medical tests for
diagnosis, screening, and monitoring of
diseases. Body Sensor Networks application
includes monitoring, diagnostic, or therapeutic
levels and implantable biomedical systems.
3D modeling & printing includes customized
implants and orthopedic replacement parts.
Biomechanics explores biological problems in
Cardiovascular and Respiration, Artificial
Organs Includes blood purification,
cardiovascular intervention, biomaterials,
artificial metabolic organs and more. Bio
sensors include immunosensors, enzyme-
based biosensors, and organism.
Computational Methods in Biomedical
Engineering - robust design solutions for
artificial joints, stents, minimally invasive
surgery, and assistive technology. Medical Data
Processing- details decision support systems
using heuristic, algorithmic and/ or statistical
methods.
A Master’s Degree (M.E., M.Tech or M.Sc) in relevant
field
94
Code Department Fields of Specialization Minimum Qualification
PSIC01
Instrumentation and
Control Systems
Engineering
Control Systems, Image Processing.
A Master’s degree (M.E./ M.Tech) in the following
specializations:
Control & Instrumentation Engg/ Process Control &
Instrumentation Engg/ Control Systems Engineering/ Applied Electronics/ Communication Engineering.
54. Rajiv Gandhi Institute of Technology, Govt. Engineering College, Kottayam (Kerala) - 686 501 - RG
Code Department Fields of Specialization Minimum Qualification
RGEE01 Electrical Engineering Power and Renewable Energy System,
Industrial Drives, Control Engineering.
As per norms of APJ. Abdul Kalam Technological
University, Trivandrum. RGME01
Mechanical Engineering
RGCE01 Civil Engineering
Transportation Engg, Structural Engineering
Geotechnical Engg., Water Resource
Engineering.
55. Smart Ashok Technological Institute, Vidisha 464 001– SV
Code Department Fields of Specialization Minimum Qualification
SVCE01 Civil Engineering
Building Technology & Materials, Retro
fixing of Buildings, Sub Surface Technology,
Transportation Engineering, Environmental
Engineering, Structures and Fluid Mechanics,
Soil Mechanics.
Master’s degree (ME/M.Tech.) in Civil Engineering
with first division or equivalent.
SVCS01 Computer Science and
Engineering
Machine Learning, Artificial Intelligence,
Data Mining, Image Processing, Ad-hoc
Network, Mobile Computing, Image
Processing, Computer Network Security.
Master’s (M.E./ M.Tech.) in Computer Science & Engineering or related areas with first division or
equivalent.
SVIT01 Information Technology
Machine Learning, Artificial Intelligence,
Data Mining, Image Processing, Ad-hoc
Network, Mobile Computing, Image
Processing, Computer Network, Security.
Master’s degree (ME/ M. Tech.) in Computer Science
& Engineering, Information technology or related
areas with first division or equivalent.
SVEE01 Electrical Engineering Power Electronics, Drives. Master’s degree (ME/M. Tech.) in Electrical Engineering with first division or equivalent.
SVME01 Mechanical Engineering
Ergonomics, TQM, SQC, Mechatronics,
Production and Operation Management,
Refrigeration & Air conditioning, Quality, Productivity, Six Sigma, SQC.
Master’s degree (ME/M.Tech.) in Mechanical
Engineering with first division or equivalent.
56. Sardar Patel College of Engineering, Mumbai (Maharashtra) - 400 058 - SM
Code Department Fields of Specialization Minimum Qualification
SMCE01 Civil Engineering
Construction Management.
M.E/M. Tech. in Construction Management,
Transportation Engineering, Geotechnical
Engineering, Hydraulic and Offshore Engineering, Environmental Engineering.
Transportation Engineering.
Hydraulics and Fluid Mechanics.
Environmental Engineering.
Structural Engineering. Structural Engineering, Geotechnical Engineering.
57. S.V. National Institute of Technology, Surat - 395 007 -SS
Code Department Fields of Specialization Minimum Qualification
SSCE01 Civil Engineering
Environmental Engineering, Water Resources Engineering, Urban Planning, Transportation Engineering and Planning, Structural
Engineering, Soil Mechanics & Foundation
Engineering.
Masters degree in relevant area of Engineering.
Admission as per the norms available on the institute’s website: www.svnit.ac.in
95
Code Department Fields of Specialization Minimum Qualification
SSME01 Mechanical
Engineering
Design and Dynamics, Thermal and Fluid Engineering, Manufacturing and Industrial
Engineering.
Masters degree in Engineering with specialization in Thermal and Fluid Engineering/ Manufacturing and
Industrial Engineering/ Design and Dynamics/
Robotics/ Mechatronics/ Energy Systems Engg./ Automobile Engg./ Aeronautical Engg./ Cryogenics/
CAD/ CAM/ CIM/ Production/ Tribology/ Turbo
Machines. Admission as per the norms available on the institute’s
website: www.svnit.ac.in
SSEE01 Electrical Engineering Power Electronics & Electrical Drives, Electrical Power Systems, Control and
Instrumentation, Energy Systems.
Masters degree in relevant area of engineering Admission as per the norms available on the institute’s
website: www.svnit.ac.in
SSEC01
Electronics &
Communication Engineering
Communication and Networking:
Communication Systems, Communication Networks and Internet, Computational
Electromagnetics, Microwaves, RF and
Antennas, Multimedia Systems, Optical Communication and Photonics, Wireless
Communication, Information Theory and Coding.
Microelectronics: Devices & IC Technology,
Reliability of Electronics Devices and Circuits, Device Simulation and Modeling,
VLSI and System Hardware Design, CAD
Tools, MEMS Design and Technology (including Bio-MEMS), Flash Memory
Devices, Organic Semiconductor Devices,
CMOS Devices, Spintronic Devices, Photovoltaic Devices, Material Growth and
Characterization.
Electronics Systems: Electronic
Instrumentation, Signal Processing
Applications, Biomedical Electronics,
Embedded System Design. Signal Processing: Speech Processing, Image
Processing and Computer Vision. Bio Medical
Signal Processing.
M.E./ M.Tech. or equivalent degree in Electronics,
Electronics and Communication, Telecommunication, Bio-medical Engg.
(M.E./ M.Tech. in Electrical Engg. from IIT).
Admission as per the norms available on the institute’s website: www.svnit.ac.in
SSCS01 Computer Engineering
Information Security and Privacy Software
Requirements Specification using Ontologies.
Computer Vision/Image Processing Machine Learning/Soft Computing Wireless Network
Automata/Compiler.
Masters degree in Computer Engineering or allied
fields.
Admission as per the norms available on the
institute’s website: www.svnit.ac.in
SSCH01 Chemical Engineering
Catalysis in refining & petrochemicals
processes, Catalysis in biomass conversion,
Biofuels, Nanofuels, Wastewater treatments, Membrane separations, Metal recovery
methods, Multiphase flow, Syntheses and
applications of metal/ metal oxide nanoparticles, Crystallization processes,
Energy and environment management, CFD
in Chemical Engg., Polymer nanotechnology and polymer nanocomposites, Fuel cells,
Microbial fuel cells, Distillation,
Nanofluidics, Powder technology, Extraction, Thin film Solar cells, Electrocoagulation,
Green Chemistry, Nanomilling, Supercritical
Fluid Extractions.
Masters degree in Chemical Engineering or allied
fields.
Admission as per the norms available on the institute’s
website: www.svnit.ac.in
58. Sant Longowal Institute of Engineering & Technology (Deemed University), Longowal (Punjab) - 148 106 - SP
Code Department Fields of Specialization Minimum Qualification
SPME01 Mechanical Engineering
Industrial & Production Engineering (Quality
& Reliability Engineering; Supply Chain
Management, TPM, TQM), Thermal Engineering, Non-Conventional Machining,
Hybrid Machining Process, Welding Engineering, Agri-Waste Management,
Simulation Vibration, Precision Metrology,
Metal Machining/ Cutting, Product Design Management, Automobile Engineering,
Composite & Advanced Materials.
M.Tech.
96
Code Department Fields of Specialization Minimum Qualification
SPFE01 Food Engineering &
Technology
Food Engineering, Food Processing &
Preservation, Food Process Engineering,
Food Processing Technology, Food Technology, Agricultural & Food
Engineering, Food Science and Technology,
Food Science or relevant field.
M.Sc./ M.Tech.
SPIE01 Electronics &
Instrumentation Engineering
Biomedical Engineering
Control Engineering
Electrical Engineering Electrical Engineering (Power)
Electrical Power Engineering
Electronics Engineering Instrumentation & Control Engineering
Instrumentation Engineering
Instrumentation Technology Power Electronics
Biomedical Instrumentation
Control & Instrumentation Control System Engineering
Instrument Technology
Instrumentation & Process Control Medical Electronics Engineering
Medical Instrumentation
Medical Electronics
M.E. / M.Tech or equivalent
SPCT01 Chemical Technology
Biomass and Bioenergy
Conventional and Non-conventional Energy Sources
Environmental Engineering
Industrial Pollution Control Hydrogen Energy
Biorefineries (Energy and Biomaterials)
Biomaterials Controlled Drug Delivery
Waste Water Treatment using polymeric
Materials Energy Conservation
Polymer Engineering
Modelling Simulation and Optimization Polymer Composites
1.(a) Candidate should have B.E./ B.Tech. or
equivalent in Chemical Engineering/ Chemical
Technology/ Chemical Engineering (Plastic &
Polymer)/ Chemical & Polymer Engineering,
Chemical & Alcohol Technology/ Chemical & Bio-
Engineering or equivalent
(b) The candidate must have secured at least 55%
marks (50% for reserved categories) – aggregate in
B.E. / B.Tech.
2. Candidate must have M.E./ M.Tech. in Chemical &
allied fields with 60% marks (55% for reserved
categories).
59. Shri Guru Govind Singh Institute of Engineering & Technology, Nanded - 431 606 – SG
Code Department Fields of Specialization Minimum Qualification
SGEC01
Electronics &
Communication
Engineering
VLSI and Embedded Systems.
M.E./ M.Tech degree in relevant discipline with minimum 55% marks or equivalent CGPA.
SGEC02 Signal Processing: Speech, Biomedical
Signals.
SGEC03 Image and Video Processing.
SGEC04 Pattern Recognition.
SGIC01
Instrumentation &
Control
Measurement and Instrumentation:
Industrial Instrumentation, Process Instrumentation and Control, Recent trends
and Applications in Measurement and
Instrumentation, Intelligent Instrumentation, Biomedical Instrumentation and
Applications, Biomedical Signal Processing
and Applications Advanced Sensors & MEMS Devices.
M.E./ M.Tech or Equivalent degree in Instrumentation, Instrumentation & Control,
Electrical Engineering, Electronics, Electronics &
Telecommunication, Electronics & Instrumentation, Electrical & Electronics Engineering, Biomedical
Instrumentation with minimum 55% marks or
equivalent CGPA.
SGIC02
Control System: Linear System Theory,
Nonlinear Systems, Process Identification and Control, Robust and optimal control,
sliding Mode control and Applications,
Adaptive Control Computer Controlled Systems including Process Control, Large
Scale System Modeling and Control, Nuclear
Reactor Control, Neural and Fuzzy based Control, Intelligent Control, and Evolutionary
Approaches for Control System.
97
Code Department Fields of Specialization Minimum Qualification
SGIC03 Instrumentation & Control
Digital Signal and Image Processing:
Signal Processing, Speech Processing, Speaker Identification and Recognition,
Image Processing and Computer Vision,
Biometrics and Applications, Wavelets and Applications in Real Time Processing of
Signals.
M.E./ M.Tech or Equivalent degree in
Instrumentation, Instrumentation & Control, Electrical Engineering, Electronics, Electronics &
Telecommunication, Electronics & Instrumentation,
Electrical & Electronics Engineering, Biomedical Instrumentation with minimum 55% marks or
equivalent CGPA.
SGPE01
Production Engineering
Micro-Manufacturing
M.E./ M.Tech. degree in Production, Mechanical or
equivalent with minimum 55% marks or equivalent
CGPA.
SGPE02 Advanced Manufacturing Technologies
SGPE03
Modeling and Analysis of Manufacturing
Processes: Machining, Casting, Welding and
Metal Forming.
SGPE04 CAE for Composites
SGPE05 Robust Design and Simulation Analysis for
Products and Processes
SGPE06 Production/ Operations Management and
PLM
SGPE07 Tool Condition Monitoring
SGCE01
Civil Engineering
Hydraulics and / Water Resources
Engineering
Master’s degree in Hydraulics and/ or Water Resources/ Environmental Engineering or equivalent
degree with minimum 55% marks or equivalent
CGPA.
SGCE02 Environmental Engineering
SGCE03 Geotechnical Engineering
SGCE04 Structural Engineering
SGME01
Mechanical Engineering
Micro Manufacturing
M.E./ M.Tech. degree in Mechanical/ Production Engineering or equivalent with minimum 55% marks
or equivalent CGPA.
SGME02 Advanced Manufacturing Technologies
SGME03 Tribological Characterization
SGME04 Quality and Reliability
SGME05 Production and Operation Management
SGME06
Manufacturing Process Modeling and
Analysis: Machining, Casting, Welding and
Metal Forming
SGME07 Thermo-Structural Analysis, Design and
Analysis of Composites
60. Shri G.S. Institute of Technology & Science, Indore - 452 003 – GS
Code Department Fields of Specialization Minimum Qualification
GSCE01 Civil Engineering
Structural Engineering, Transportation
Engineering, Environmental Engineering,
Water Resource Engineering, Geotechnical Engineering, Remote Sensing.
M.E./M.Tech degree in relevant discipline with
minimum 55% marks or equivalent CGPA.
GSEE01 Electrical Engineering
Power Electronics, Electrical Drives, High
Voltage Engineering, Power Systems, Energy
Conservation, Control Systems, Industrial
Electronics.
GSEC01 Electronics &
Communication
Engineering
Wireless Communication, RF and
Microwave, Digital Signal Processing,
Microelectronics Design, Cryptography.
GSCS01 Computer Science &
Engineering -
98
Code Department Fields of Specialization Minimum Qualification
GSME01 Mechanical Engineering
Thermal Engineering, Design Engineering,
Flued Engineering, Conventional and Un-
conventional Energy, Tribology &
Maintenance Engineering. M.E./ M.Tech degree in relevant discipline with minimum 55% marks or equivalent CGPA.
GSIP01 Industrial & Production
Engineering
Production / Operations Management, Supply
Chain Management, Quality Management,
Advanced Manufacturing Technology.
61. Tezpur University, Tezpur Assam -784 028 - TU
Code Department Fields of Specialization Minimum Qualification
TUCS01 Computer Science &
Engineering
Networks, Mobile Computing, Data Mining,
Network Security, Bio-informatics, Workflow
Automation, Web Theory, Knowledge
Representation and Reasoning, Rehabilitation
Robotics, Natural Language Processing,
Wireless Networks and Mobile Computing,
Pattern Recognition, Image Processing,
Wireless Sensor Network, Algorithms,
Computational Geometry, Remote Sensing.
M.Tech. in Computer Science/ I.T./Electronics
MCA
M.Sc. in Computer Science/ I.T.
TUEC01
Electronics &
Communication
Engineering
Sensor Design, Machine Vision, Optical
Networks and its Components, Wireless
Communication, Bio-electronics, Biosensors,
Neuro-bio-engineering, Microwave
Antennas, Semiconductor, Bio-electronic
Devices, Vehicular Electronics, Neuro-
engineering, Computer Vision, Compressive
Sensing MRI, Signal and Image Processing,
M.E./ M.Tech./ M.Sc.(Engg.)/ M.S. in Electronics/
Communication/ Electronics Design/ Electrical/
Instrumentation/ Control/ Microwave/ Biomedical/
Bioelectronics/ Biotechnology/ Computer Science/
Information Technology, M.Sc. in Electronics/
Physics/ Applied Mathematics, MCA with Physics,
Chemistry and Mathematics in Bachelor degree,
MBBS with MD/ MS degree.
TUEN01 Energy
Biofuels, Biomass Energy, Energy and
Environment, Energy Management and
Mathematical Modeling, Farm
Mechanization, Fuel Cell, Hydrogen
Technology and Redox Flow Battery, Solar
Energy, Photovoltaic, Energy Systems
M.E./ M.Tech/ M.Sc. degree in Energy Technology/
Energy Management/ Energy related Engineering and
Technology/ Physics/ Chemistry/ Agriculture Allied
subjects.
TUFE01 Food Engineering and
Technology
Rice Science and Technology, Product
Development, Food Quality, Food
Biochemistry, Fermented Foods, Food
Process Modeling, Product Technology
Development, Transport Processes in Food,
Process and Food Engineering, Fruits and
Vegetable Processing and Machineries,
Drying and Dehydration, Unit Operations,
Isolation and Establishment of Probiotic
Organism, Probiotic Food Formulation and
Development.
M.Tech./ M.E./ M.Sc in Food Technology/ Food
Processing Technology/ Food Science and
Technology/ Food and Nutrition/ Microbiology/ Food
Microbiology/ Bio-chemistry/ Chemistry/ Bio-
technology/ Food Engineering/ Applied Microbiology/
Dairy Engineering/ Food Bio-technology Engineering.
62. Thiagarajar College of Engineering, Madurai -625 015 – TM
Code Department Fields of Specialization Minimum Qualification
TMCE01 Civil Engineering
Structural Engineering, Environmental
Engineering, Hydrology and Water Resources
Management, Geotechnical Engineering, Transportation Engineering, Pollution
control, Construction materials, Repair &
Rehabilitation.
As per the affiliating University norms.
M.E./ M.Tech. /M.S. (By Research) in the relevant
branch of Engineering & Technology and
A minimum of 55% marks or CGPA of 5.5 on a
ten point scale in the qualifying exam (50% marks
or CGPA of 5.0 on a ten point scale for SC/ST
candidates). TMEE01 Electrical Engineering
Power Systems, Soft computing, Renewable
Energy Resources, Energy Conservation and Management, Power Electronics and Drives,
Electrical Machines, Optimisation
Techniques, Smart Grid, Distributed Generation Systems, Special Machines,
Control Systems, FACTS devices and
controllers, AI and Expert Systems Applications.
99
Code Department Fields of Specialization Minimum Qualification
TMME01 Mechanical Engineering
Thermal Engineering, Computational Fluid
Dynamics, Design Engineering, Composite
Materials, Automation, CAD/CAM, CIM,
Machine Vision, Mechatronics, Rapid Prototyping, Quality Engineering, Reliability
Engineering, Industrial Engineering,
Manufacturing Management, Logistics and Supply Chain Management, Lean/Agile
Manufacturing, Robotics, Micro channel
cooling. As per the affiliating University norms.
M.E./ M.Tech. /M.S. (By Research) in the relevant
branch of Engineering & Technology and
A minimum of 55% marks or CGPA of 5.5 on a ten point scale in the qualifying exam (50% marks or CGPA of 5.0 on a ten point scale for SC/ST candidates).
TMEC01 Electronics &
Communication
Engineering
Wireless Communication, Digital Signal
Processing, RF Circuits and Systems,
Antennas., RFMEMS, Image Processing, Remote Sensing and GIS, VLSI Design,
Embedded Systems, Sensors and Instrumentation, Wireless Networks, Medical
Electronics, Optical Communication
TMCS01 Computer Science & Engineering
Network Security, Data Mining, Artificial
Intelligence, Multicore Architecture, Parallel
Processing, Computer Networks, Knowledge Engineering, Machine Learning, Software
Testing, Software Quality and Reliability,
Grid Computing, Internet Technology, Compliers, Multimedia, Computer Vision,
Biometrics, Multimedia and Graphics,
Computer Algorithms.
63. The National Institute of Engineering, Mysore- 570 008 – NM
Code Department Fields of Specialization Minimum Qualification
NMCE01 Civil Engineering
Structural Engineering, Geotechnical
Engineering, Water Resources &
Environmental Engineering, Transportation
Engineering, Remote sensing and GIS.
M.E/ M.Tech in Civil Engineering with at least 60%
marks or equivalent grade.
NMEE01 Electrical Engineering
Power system distribution, Voltage stability, Power system dynamics, FACTS, Distributed
generation, SMARTGRID, Artificial
Intelligence applications.
B.E./ B.Tech in Electrical Engineering with 60% marks (aggregate of all years/ semesters), M.E./
M.Tech in Electrical Engineering with at least 70%
aggregate marks or equivalent grade.
NMIP01 Industrial & Production
Engineering
Operations Management, Technology
enabled education, Metal cutting, Industrial engineering and management,
Manufacturing, Mechanical and wear characterization of advanced composites.
M.E./ M.Tech in Mechanical/ Production/ Management and related branch with at least 60%
marks or equivalent grade.
NMCS01 Computer Science &
Engineering
Data mining, Cloud computing, Network security, Big data analysis and related fields.
M.E./ M.Tech in Computer Science & Engineering/
Information Science & Engineering with a minimum of 75% marks or equivalent grade from UGC
recognized universities.
64. TKM College of Engineering, Kollam (Kerala) - 691 005 - TK
Code Department Fields of Specialization Minimum Qualification
TKCE01 Civil Engineering
Structural Engineering, Structural dynamics
and Earth Quake Engineering, Environmental
Engineering, Environmental Science, Engineering Geology.
Master’s degree in Civil Engineering with First
division or equivalent.
TKME01 Mechanical Engineering
Thermal management of electronic systems,
nanomaterials and nanofluids, super
conductivity, cryogenicheat transfer, heat and
mass transfer in multiphase and single phase
systems, food preservation, cryocoolers for
space applications, Computational Fluid
Dynamics (CFD), computational combustion,
fracture mechanics, micro structural studies,
biomechanics, rapid prototyping, Solar
cooling systems, Energy conservation in
thermal systems, Composite parabolic
collectors, Green buildings,Development of
sensors for cryogenic applications.
Master’s degree in Mechanical Engineering with First
division or equivalent.
100
65. University Visveswaraya College of Engineering, Bangaluru- 560 056 - UV
Code Department Fields of Specialization Minimum Qualification
UVCE01 Civil Engineering
Structural Engineering, Geotechnical
Engineering, Environmental Engineering,
Construction Technology; Highway
Engineering, Water Resources Engineering,
Pre-stressed Concrete.
A master degree in Civil Engineering or any of the
branches of Civil Engineering or equivalent fields with
minimum 60% marks.
66. University College of Engineering, Osmania University, Hyderabad-500 007 - OU
Code Department Fields of Specialization Minimum Qualification
OUCE01 Civil Engineering
Construction Engineering and Management
Geotechnical Engineering, Infrastructure
Engineering, Structural Engineering, Water
and Environmental Engineering,
Transportation Engineering.
First Class M.E./ M.Tech in Civil Engineering.
OUCS01 Computer Science and
Engineering
Cloud Computing, Data Mining, Distributed Computing, Image Processing, Information
Retrieval Systems, Mobile Computing, Parallel Processing Applications, Parallel Algorithms, Text Mining.
First Class M.E./ M.Tech in Computer Science and Engineering.
OUME01 Mechanical Engineering
Advanced Manufacturing, Additive
Manufacturing (RPT) Advanced Energy
Systems, Bulk Material Handling, CAD/CAM
Design, Computational Fluid Dynamics,
Composite Materials, Experimental
Techniques in Turbomachines, Finite Element
Methods, Industrial Engineering, Materials
Forming, Production Engineering, Robotics,
Severe Plastic Deformation, Thermal
Engineering, Turbo Machinery.
First Class M.E./ M.Tech in Mechanical
Engineering.
OUEE01 Electrical Engineering
Application of Power Electronics to Renewable Energy Sources, Control of
Electric Drives, Control and Automation, Distribution Automation, Electrical
Machines, Hybrid Electrical Vehicles,
Reactive Power Optimization, Soft Computing applications to Design and
Control of Microgrid.
Power Systems: Multilevel Inverter and its Applications, Power System Control and Optimization, Smart grid based Power
Systems and Power Quality Problems, Power
System Security, AI Applications to Power Systems, Power System Operation and
Control, Power System Reliability.
First Class M.E./ M.Tech in Electrical Engineering.
OUEC01
Electronics and
Communication
Engineering
Image Processing, GNSS, Signal Processing,
Speech Analysis, VLSI.
First Class M.E./ M.Tech in Electronics and Communication Engineering.
67. University of Hyderabad, School of Computer and Information Sciences, Hyderabad -500 046, - UH
Code Department Fields of Specialization Minimum Qualification
UHCS01 Computer and
Information Science
Image Processing, Computer Vision, Neural
Networks, Grid & Cloud Computing,
Distributed Computing, Software Engineering,
Natural Language Engineering, Computer
Networks, Mobile Computing, Cryptography,
Combinatorial optimization, Computational
modeling of Biological & Social Networks,
Bio Informatics, Systems Security, Speech
Processing, Data Mining, Neural Networks,
Rough sets, Pervasive Computing, Pattern
recognition, Machine Learning, Knowledge
representation & reasoning, Network
Forensics, Simulation & Modeling.
First Class Master’s Degree in Engineering/
Technology or equivalent in Computer Science.
101
68. Veer Surendra Sai University of Technology, Burla – 768 018 VB
Code Department Fields of Specialization Minimum Qualification
VBCE01 Civil Engineering
Geotechnical Engineering, Structural
Engineering, Water Resources Engineering,
Environmental Engineering, Transportation
Engineering.
M.E./M.Tech with minimum of 6.75 CGPA in 10
point scale (or 60% or more in aggregate) in Master’s
level and minimum of 6.75 CGPA (or 60% mark in
aggregate) at the Bachelor’s level.
VBEE01 Electrical Engineering Power System Engineering, Power
Electronics & Drives, Control System Engineering, Renewable Energy Resources.
VBEC01 Electronics &
Communication
Engineering
Signal Processing, Image Processing,
Electromagnetics & Microstrip Antenna, Computational Intelligence, VLSI, Wireless
Communication.
VBME01 Mechanical Engineering Machine Design & Analysis, Production
Engineering, Thermal Engineering.
VBPE01 Production Engineering
Robotics, Non-Traditional Machining,
Manufacturing Systems, Advance Casting,
Advance Welding, FMS, CIM, CAD/CAM,
RP Operation Management.
69. Veermata Jijabai Technological Institute (VJTI), Mumbai (Maharashtra) – 400 019 - VM
Code Department Fields of Specialization Minimum Qualification
VMEE01 Electrical Engineering
High Voltage, Partial Discharge, control
system, Power System Stability, Smart Grid,
Dynamic & Control, Renewable Energy.
M.E./M.Tech.(Electrical Engineering) or allied areas
consistent with field of specialization.
VMCE01 Civil Engineering
Civil Engineering, Structural Engineering, Environmental Engineering, Construction
Management, Construction Engineering,
Earthquake Engineering, Transportation Engineering, Geospatial Technology, Remote
Sensing, Geotechnical Engineering,
Foundation Engineering, Geotechnical earthquake engineering, Water resource
management, Civil Technology, Construction
Engineering & Management, Construction Technology, Construction Technology &
Management, Environmental Management,
Environmental Science &Engineering, Environmental Science & Technology, Water
& Environmental Technology, Civil and
Water Management Engineering, Building Construction & Technology, Infrastructure
Engineering.
M.E./M.Tech. in Civil Engineering or allied areas
consistent with field of specialization.
VMME01 Mechanical
Engineering
Design, Vibration, Tribology, FEA,
Mechatronics, CAD/ CAM, Robotics, Solar
Energy, Energy Management, Thermodynamics, Microfluidics, Thermal and
Fluid Engg., Computational Fluid Dynamics,
Refrigeration and Air conditioning, Material science, Manufacturing Engg.,
Nanotechnology, Composites etc.
M.E./M.Tech.(Mechanical Engineering) or allied areas
consistent with field of specialization.
VMEC01 Electronics Engineering
Biomedical Signal Processing, Computer Architecture, Virtual Instrumentation, Smart
Grid, Dynamics & Control, Computer
Communication, Wireless Communication, Sensor Networks.
M.E./ M.Tech (Electronics Engineering/ Electronics &
Telecommunication Engineering) or allied areas
consistent with field of specialization.
VMTX01 Textile Technology Textile Technology, Textile Engineering,
Fibre Science & Technology, Textile
Chemistry.
M.E./M.Tech in relevant branch.
70. Visvesvaraya National Institute of Technology, Nagpur 440 011 – VR
Code Department Fields of Specialization Minimum Qualification
VREE01 Electrical Engineering
Power System Stability/ Operation/
Protection, Power Electronics, HVDC/
FACTS, Electric Drives/ Renewable Energy
Systems, Control System.
First Class Master' degree in Electrical Engineering,
Power Systems/ Power Electronics/ Electric Drives/
Control and Instrumentation/ Control System/
Inumentation.
102
Code Department Fields of Specialization Minimum Qualification
VRMT01 Metallurgical
Engineering
1. Alloy Development
2. Corrosion & High temperature oxidation
3. Development of:
a) Ceramic & glasses
b) Polymeric materials
c) Composites
4. Fatigue and fracture behaviour of materials
5. High temperature deformation.
6. Wear behaviour of engineering materials
7. Welding metallurgy.
M.Tech./ M.E. (Metallurgical Engg. OR Materials
Science & Engineering OR Mechanical Engineering
OR Polymer Engineering).
71. Walchand College of Engineering, Sangli – 416 415 WS
Code Department Fields of Specialization Minimum Qualification
WSCS01 Computer Science &
Engineering
Artificial Intelligence, Pattern Recognition,
Machine Learning, Databases, Data Mining,
Networking, Image Processing, Network
Security, High Performance Computing,
Cloud Computing, Computer Vision, ToT,
GIS, Big Data. As per Shivaji University Kolhapur Norms
(http://www.unishivaji.ac.in/)
WSEC01 Electronics Engineering
Digital Signal Processing, Electronic
Communication Engineering, VLSI Design,
Image Processing, Electronic System Design,
Control Systems, Mobile Communication,
Sensor Networks, Image Processing,
Microwave Energy, Biomedical Electronics,
Machine Vision.
WSCE01 Civil Enineering
Civil Environmental Engineering:
Water and Wastewater Treatment, Modeling
of Environmental Systems, Solid Waste
Management, Air Pollution, Constructed
Wetlands.
Civil Building Technology:
Structural masonry and materials,
Construction project management, Energy
Efficiency in Building, Passive design in
building performance.
Civil Structural Engineering:
Earthquake Engineering, Finite Element
Analysis, Structural dynamics, Concrete
technology, Structural Engineering, Design
optimization, Composite material, Smart
material, Structural Health Monitoring,
Rehabilitation and retrofitting of structures,
Nano-machines and Nano-material, Pre-
stressed concrete.
As per Shivaji University Kolhapur Norms
(http://www.unishivaji.ac.in/)
WSME01 Mechanical Engineering
Heat Power Thermal Engineering,
Cryogenics, Production Engineering
Mechatronics, Micromachining,
Manufacturing, Design Engineering,
Condition Monitoring, Industrial Engineering,
Vibration and Acoustics, Non-conventional
machining.
WSEE01 Electrical Engineering
Power System Analysis, Operation, Control
and Protection, Power Quality Issues, Power
Electronics and Drives, High Voltage
Engineering, Renewable Energy Sources,
Control Systems, Adaptive and Optimal
Control Systems, Non Liner and Digital
Control Systems, Micro-grid, and Distributed
generation.
103
72. Indian Institute of Technology, Hyderabad, Telengana 502285 - HY
Code Department Fields of Specialization Minimum Qualification
HYCE01
Civil Enineering
Environmental Engineering First class Master’s degree in Biotechnology/ Chemical
Engineering/ Environmental Engineering/ Environmental Science from a recognized university.
HYCE02 Geotechnical Engineering
First class Bachelor’s degree in Civil Engineering from a recognized university AND
First class Master’s degree in Geotechnical (or, al-
lied) Engineering from a recognized university.
HYCE03 Structural Engineering
First class Bachelor’s degree in Civil/ Aerospace/
Mechanical Engg. from a recognized University AND
First class Master’s degree in Structural (or, allied) Engineering from a recognized university.
HYCE04 Water Resources Engineering
First class Master’s degree in Agricultural
Engineering/ Earth Sciences/ Geophysics/ Hydrology/
Meteorology/ Remote Sensing and GIS/ Water
Resources Engineering from a recognized university.
HYCE05 Transportation Engineering
First class Bachelor’s degree in Civil Engineering from
a recognized university AND
First class Master’s degree in Transportation (or,
allied) Engineering from a recognized university.
HYBT01 Biotechnology Biochemistry, Microbiology, Cell biology,
Computational Biology, Structural Biology, Biophysics, Genetics, Neurobiology.
M.Tech or equivalent degree in any allied area of Life
Sciences or M.Sc. degree in any allied area of Life Sciences with 2 years working experience.
HYCS01 Computer Science &
Engineering
Theoretical computer science, networks, machine learning, data science, computer
architecture, parallel and distributing
computing, and other emerging areas in computer science and engineering.
Candidates with a B.Tech./ B.E./ B.S./ M.Sc./ MCA
degree in any discipline and having a M.Tech/ M.E./
M.S. degree in CSE/ IT/ ECE/ EE.
HYEE01 Electrical Engineering
Communication Systems including RF and Photonics, Image, Speech and Signal
Processing, Artificial Intelligence and
Machine Learning, Wireless Communication, VLSI Design, Power Systems, Machines,
Control, Microelectronics, Nano Devices,
MEMS and Sensors, Organic Electronics, Power Electronics, Biomedical Devices.
Master’s degree in Electrical or Electronics and
Communication Engineering, Instrumentation
Engineering, Nanotechnology or Master’s degree in
Physics followed by a Master’s degree in
Engineering in an area of relevance to the area of
research.
73. Indian Institute of Technology, Bhubneshwar, Orissa 751 013 –BH
Code Department Fields of Specialization Minimum Qualification
BHBS01 School of Basic Sciences
Basic Science
Chemistry
Mathematics
Physics
Minimum 60% marks or 6.5 CGPA (in a 10‐point scale) in the Master’s or equivalent degree in
appropriate discipline with consistently good
academic record.
Minimum 55% marks or 6.0 CGPA (in a 10‐point
scale) in the Bachelor of Science or equivalent degree
in appropriate discipline with consistently good academic record.
Minimum 60% marks or 6.5 CGPA (in a 10‐point scale) is required in all other examinations. A single
relaxation up to 10% marks either at Xth or XIIth
level examination or equivalent is permitted.
BHHS01
School of Humanities
Social Science and
Management
Economics
English
Psychology
Minimum 55% marks or 6.0 CGPA (in a 10‐point
scale) in the Master's degree in appropriate discipline.
Minimum 60% marks or 6.5 CGPA (in a 10‐point scale) is required in all other examinations. A single
relaxation up to 10% marks either at Xth or XIIth
level examination or equivalent is permitted.
The candidate must be UGC‐NET (JRF and LS)
qualified.
104
Code Department Fields of Specialization Minimum Qualification
BHCG01 School of Earth, Ocean
and Climate Sciences
Climate Sciences
Geosciences
Climate Sciences
Minimum 60% marks or 6.5 CGPA (in a 10‐point scale) in the Master's or equivalent degree in Physics/
Chemistry/ Mathematics/ Oceanography/ Meteorology/ Marine Science/ Earth Science/
Mechanical/ Civil/ Electrical/ ECE/ Geoinformatics/
Remote Sensing/ Computer Science.
Minimum 55% marks or 6.0 CGPA (in a 10‐point
scale) in the Bachelor of Science or equivalent degree in appropriate discipline with Mathematics as a
compulsory subject.
Minimum 60% marks or 6.5 CGPA (in a 10‐point scale) is required in all other examinations. A single
relaxation up to 10% marks either at Xth or XIIth
level examination or equivalent is permitted.
Geosciences
Minimum 60% marks or 6.5 CGPA (in a 10‐point scale) in the Master's or equivalent degree in
Geology/Geophysics/Earth
Science.
Minimum 55% marks or 6.0 CGPA (in a 10‐point
scale) in the Bachelor of Science or equivalent degree in appropriate
discipline with consistently good academic record.
Minimum 60% marks or 6.5 CGPA (in a 10‐point scale) is required in all other examinations. A single
relaxation up to 10% marks either at Xth or XIIth level examination or
equivalent is permitted.
BHES01 School of Electrical
Sciences
Computer Science & Engineering
Electrical Engineering
Electronics & Communication Engineering Minimum 60% marks or 6.5 CGPA (in a 10‐point
scale) in M.Tech/ M.E. or equivalent degree in appropriate discipline. OR B.Tech/ B.E. or
equivalent degree in appropriate discipline with
minimum 70% marks or 7.5 CGPA (in a 10‐point scale) OR Minimum 60% marks or 6.5 CGPA (in a
10‐point scale) in Master of Science or equivalent
degree in appropriate discipline with consistently good academic record.
Minimum 60% marks or 6.5 CGPA (in 10 point scale) is required in all other examinations. A single
relaxation up to 10% marks either at Xth or XIIth
level examination or equivalent is permitted.
BHIF01 School of Infrastructure Civil Engineering
BHME01 School of Mechanical
Sciences Mechanical Engineering
BHMM01 School of Metallurgical
and Materials Sciences Metallurgical and Materials Engineering
74. Indian Institute of Technology, Patna, Bihar 801 103 - PA
Code Department Fields of Specialization Minimum Qualification
PAME01 Mechanical Engineering Mechanical Engineering
As per IIT Patna Bihar norms
(https://www.iitp.ac.in/)
PACB01 Chemical & BioMedical
Engineering Chemical & BioMedical Engineering
PACE01 Civil & Environmental
Engineering Civil & Environmental Engineering
PACS01 Computer Science &
Engineering Computer Science & Engineering
PAEE01 Electrical Engineering Electrical Engineering
105
75. Indian Institute of Technology, Indore, Madhya Pradesh 453 552- IR
Code Department Fields of Specialization Minimum Qualification
IRCS01 Computer Science and
Engineering Computer Science and Engineering 1. Minimum first class* Master degree in the relevant
discipline of the Engineering/ Technology, OR
2. Minimum first class* Bachelor degree in the
relevant Engineering/ Technology discipline from a
reputed Institute with a valid GATE score, OR
3. B.Tech. degree from an Indian Institute of
Technology (IIT) with a minimum CPI of 8.0 OR 4. Minimum first Class* Master degree in the relevant
discipline of Science with valid GATE qualification
OR UGC/ CSIR-JRF qualification OR equivalent fellowship.
IREE01 Electrical Engineering Electrical Engineering
IRME01 Mechanical Engineering Mechanical Engineering
IRCE01 Civil Engineering Civil Engineering
IRBB01
Bio-Sciences and
Bio-Medical
Engineering
Bio-Sciences and Bio-Medical Engineering
76. Indian Institute of Technology, Ropar, Punjab 140 001- RO
Code Department Fields of Specialization Minimum Qualification
ROME01 Mechanical Engineering Mechanical Engineering
As per IIT Ropar, Punjab norms
(www.iitrpr.ac.in/)
ROCS01 Computer Science and
Engineering Computer Science and Engineering
ROCE01 Civil Engineering Civil Engineering
ROCH01 Chemical Engineering Chemical Engineering
ROEE01 Electrical Engineering Electrical Engineering
77. Indian Institute of Technology, Mandi, Himachal Pradesh 175 005- MA
Code Department Fields of Specialization Minimum Qualification
MABS01 School of Basic Science Basic Science.
Master's degree in Sciences with a good academic
record/ Master's degree in Engineering/Technology
with a good academic record/ B. Tech degree of IIT
with a minimum of CGPA of 8.0 on a 10.0 point scale
or with a valid GATE Score or B. Tech / B.E degree of
any recognized University in India with a minimum
CGPA of 8.0 on a 10.0 point scale or equivalent with
valid GATE score.
MACS01 School of Computing &
Electrical Engineering Computing & Electrical Engineering.
(a) Candidates with a Master's degree in Engineering/
Technology with a good academic record or a Master's
degree by Research in Engineering/ Technology disciplines, with a good academic record.or
(b) Candidates with Master's degree in Sciences with a
good academic record and of exceptional merit are eligible for the relevant Engineering discipline and
with a valid GATE score or UGC/ CSIRNET/ NBHM
or equivalent qualification in the relevant area tenable for the year of registration. In the case of candidates
with more than 5 years of relevant experience after the
Master's degree, the requirement of a test score may be waived by the Selection Committee.or
(c) Candidates who have qualified for the award of Bachelor's degree in Engineering/Technology with
exceptionally good academic record in an eligible
discipline will be considered for direct admission to Ph.D. Programme as a regular full time scholar subject
to the following conditions:
(i) B.Tech degree from one of the IITs, with a minimum CGPA of 8.0 on a 10.0 point scale.
(ii) Bachelor's degree in Engineering/ Technology
from any other University, should be among the top 5% or 20 rank holders, declared by the
University and having a valid GATE score.
(iii) Bachelor's degree holder in Engineering/ Technology, serving for two years or more in a
reputed R & D organization and having a proven
research record.
MASE01 School of Engineering Engineering.
106
78. Dr. B. R. Ambedkar National Institute of Technology, Jalandhar, Punjab 144 011- JL
Code Department Fields of Specialization Minimum Qualification
JLCH01 Chemical Engineering Chemical Engineering
Master’s Degree in Engineering/ Technology in the
relevant area of research along with Bachelor’s Degree
in appropriate branch of Engineering/ Technology with
a first class or minimum 60% marks (or CGPA of 6.5 on
10 point scale) in the qualifying examination.
JLCS01 Computing Science &
Engineering Computing Science & Engineering
JLME01 Mechanical Engineering Mechanical Engineering
JLEC01 Electronics &
Communication
Engineering
Electronics & Communication Engineering
79. M. S. Ramaiah Institute of Technology, Bengaluru, Karnataka 560 054 - MB
Code Department Fields of Specialization Minimum Qualification
MBCE01 Civil Engineering
General Civil Engineering:
Application of Bio mimicry in civil Engineering,
Environmentally responsible infrastructure development,
Sustainable /green building technologies, materials and climate specific building
design. Embodied Energy & life cycle
assessment.
Geotechnical Engineering:
Earthquake Geotechnical Engineering
Geo environmental Engineering,
Geosynthetics
Experimental Mechanics.
Water Resources Engineering:
Open Channel Flows and Pipe networks
Surface and Ground Water Hydrology
Reservoir planning and regulation,
Hydrologic simulation applications,
Urban hydrology & drainage systems
Utilization of Remote sensing & GIS techniques.
Environmental Engineering:
Solid waste treatment, recycling and
management
Environmental Impact Assessment,
Air pollution monitoring, modeling and control
Waste Water treatment and recycling.
Structural Engineering:
Structural Mechanics and Finite Element Analysis
RC and Pre-stressed Concrete, Masonry Structures
Structural Safety and Structural Health Monitoring
Retrofitting of RC Structures and Artificial Intelligence & Machine Learning Techniques.
Transportation Engineering:
Modeling and Optimization of
Transportation Systems
Travel Behavior, Public Transport and Non-
Motorized
Transport Planning and Management,
Accident and Black Spot Studies
Highway Engineering.
M.E./ M.Tech in Transportation Engineering/ Highway
Engineering/ Structural/ Concrete Technology/
Construction Management/ Geo-technical
Engineering/ Water Resources/ Environmental
Engineering/ Remote sensing & GIS/ Public Health
Engineering or equivalent Degree.
107
MBME01 Mechanical Engineering
Manufacturing Engineering:
Metal Matrix composites, Natural Fibre
composites, Polymer composites
Tool Design, Rapid Prototyping and
Tooling, Modeling and Simulation, CAD/CAM, CNC
Product Design and Manufacturing,
Lifecycle Management, Inventory and Supply Chains Management, Management of
Operations, Maintenance Management.
Thermal and Fluid Engineering:
Convective and Radiative Heat Transfer
Design of Thermal Equipment and Systems, Numerical Techniques
Modeling and Analysis, combustion and Flames, Fuel injection, Petrol and Diesel
Engines, CFD.
Design Engineering:
Stress Analysis, Fatigue and Fracture,
Fracture Mechanics
FEM, Tribology Design of Elements and
Systems
Optimization, CAD
Vibrations
Smart Materials and Structures, NDT.
M.E./ M.Tech Degree in Mechanical Engineering/
Production Engineering/ Industrial Engineering/
Metallurgical Engineering/Automobile Engineering/
Applied Mechanics Engineering/ Engineering Materials
Technology.
MBEE01 Electrical & Electronics
Engineering
Power Systems
HVDC Transmission Systems
Distributed Generation
Smart Grid
Artificial Intelligence Applications to Power
Systems
Power Electronics & Drives
Power Quality
Switched Mode Power Supplies
Power Electronics for Renewable Energy
Induction Motor Drive System
High Voltage Engineering
Insulation Engineering
Condition Monitoring and Diagnostics for HV Power Apparatus
EHV Power Transmission
Lightning Protection
Computational Electromagnetics
Composites for High Voltage applications
Robotics & Automation
Sensing
Controls
Signal/ Image Processing
Machine Learning
Medical Robotics
Micro & Nano Systems
Bio Electronics
MEMS
M.E./ M.Tech in Power Systems/ Power Electronics/
Power & Energy Systems/ Electrical Energy Systems/
Electrical Machines/ Computer Applications in
Industrial Drives/ Control Systems/ Control and
Instrumentation/ VILSI & Embedded Systems/ or
equivalent degree.
80. Bannari Amman Institute of Technology, Erode, Tamil Nadu 638 401 - ER
Code Department Fields of Specialization Minimum Qualification
ERBT01 Bio-Technology
Life Sciences:-
Molecular Biology and Genetic Engineering,
Plant Biotechnology, Animal Biotechnology, Molecular Diagnostics, Herbal Medicine,
Pharmacology, Bio fertilizers, Microbial Fuel
Cell, Pharmaceutical Microbiology.
Technology and Engineering:-
Biopharmaceutical Technology, Pharmaceutical Biotechnology, Bioprocess
Engineering, Microbial Biotechnology, Tissue
Engineering, Regenerative Medicine, Biomaterials, Chemical Reactor Design,
EnvironmentalBiotechnology,
anobiotechnology.
As per the affiliating University norms.
M.Sc./ M.Phil/ M.E./ M.Tech. or equivalent Degree in Biotechnology or Environmental engineering or
Biomedical Engineering or MPharm or allied disciplines
in the relevant branch of Engineering and Technology.
A minimum of 55% of marks/CGPA of 5.5 on a 10 point scale in Master’s degree in
Engineering/Technology. In case of SC/ST candidates,
50% marks or CGPA of 5.0 on a 10 point scale in the respective Master’s degree.
108
Code Department Fields of Specialization Minimum Qualification
ERCS01
Computer Science &
Engineering
Intelligent Systems :-
Artificial Intelligence, Pattern Recognition,
Machine Learning, Computer Algorithms &
Optimization Techniques, Soft Computing, Data Mining & Information Retrieval, Big
Data Analysis, Bioinformatics, Social
Network Analysis, Cognitive Systems, Deep Learning, Image Processing, Computer Vision
and Graphics
Computer Systems and Software:-
Computer Communication, Wireless Sensor
Networks, Internet of Things, Mobile Computing, AdHoc Networks, Human-
Computer Interactions, Cyber Physical
Systems, Embedded System, Computer Security, Cloud and Distributed Computing.
As per the affiliating University norms.
M.E./M.Tech. or equivalent Degree in Computer Science and Engineering or Electrical Communication
Engineering or Electrical Engineering or Information
Technology or Information Sciences or allied disciplines in the relevant branch of Engineering and
Technology.
A minimum of 55% of marks/CGPA of 5.5 on a 10 point scale in Master’s degree in
Engineering/Technology. In case of SC/ST candidates,
50% marks or CGPA of 5.0 on a 10 point scale in the respective Master’s degree.
EREC01
Electronics &
Communication
Engineering
Electronics System Design:-
VLSI system Design, Embedded System
Design, Medical Electronics, Robotics, Device modelling, Semiconductor Memories,
Nano Electronics, Display Devices.
Communication Systems:-
Wireless Communication Systems, Communication Signal Processing, Wireless
Networks, Smart Antenna Design, RF System
Design, Computer Communication, Wireless Sensor Networks, Internet of Things, Mobile
Computing, AdHoc Networks, Human-
Machine Interactions.
Intelligent Systems :-
Artificial Intelligence, Pattern Recognition,
Machine Learning, Computer Algorithms &
Optimization Techniques, Soft Computing, Software Defined Radio, Cognitive Radio,
Deep Learning, Image Processing, Computer Vision and Graphics.
As per the affiliating University norms.
M.E./M.Tech. or equivalent Degree in Electronics
and Communication Engineering, Computer Science
and Engineering or Electrical and Electronics
Engineering or Electrical Engineering or Information
Technology or Information Sciences or allied
disciplines in the relevant branch of Engineering and
Technology.
A minimum of 55% of marks/CGPA of 5.5 on a 10
point scale in Master’s degree in
Engineering/Technology. In case of SC/ST candidates,
50% marks or CGPA of 5.0 on a 10 point scale in the
respective Master’s.
109
QUALITY IMPROVEMENT PROGRAMME
Application for Advance Admission to Ph.D. Degree Programme 2019-2020
Copy to Principal Coordinator
Specimen Application and NOT to be
used for filling application
1. Application Number:
Affix
Stamp Size
Photo
2. Name:
3. Designation:
4. Department:
5. College Address:
6. Contact Address:
7. Phone (Office): 8. Mobile :
9. Phone (Residence): 10. Email :
11. Date of Birth: 12. Gender:
13. Category: 14. Married:
15. Physically Disabled: Yes/No
16. UG Degree:
Year: University:
Class/Division: Overall Percentage/CGPA:
17. UG Degree:
Year: University:
Class/Division: Overall Percentage/CGPA:
18. Teaching Experience as on September 30, 2018 (Sunday):
19. Industrial / Research Experience as on September 30, 2018 (Sunday):
20. Number of QIP/ISTE/AICTE/IMPACT Courses Attended
a) 4 to 7 days Duration: b) Two weeks Duration: c) More than 2 weeks:
21. Number of Research Papers:
a) In Refereed journals: b) In Conference Proceedings:
110
22. Institutions and Departments to which Admissions are sought
Name of the Institute Choice of Specialization
First Choice Second Choice Preference 1
Preference 2
Preference 3
23. Academic Data (Examination Passed B.E/B.Tech/B.Arch/B.Sc(Engg)/Equivalent)
Semester/Year University Year Specialization Class Marks
Obtained Percentage GPA
24. Academic Data (Examination Passed M.E./M.Tech. or Equivalent)
Semester/Year University Year Specialization Class Marks
Obtained Percentage GPA
25. Any other Qualification
Degree University Year Specialization Class Marks
Obtained Percentage GPA
26. Teaching Experience at Degree Level as on September 30, 2018 (Sunday)
Sl.No Name and Address of Employer &
Institution From (Date) To (Date) Years-Months Designation
27. Industrial/Research Experience as on September 30, 2018 (Sunday)
Sl.No Name of the Organization From (Date) To (Date) Years-Months Designation
28. Short Term Courses
Sl.No Name of the Course & Category Organizer Days From To
29. Research Papers/Book
Sl.No Title of Paper/Book Name of Author(s) Name of Journal/Conference Year Vol. Pages
111
Declaration
a. I declare that all the information given by me in this application form is correct to the best of my knowledge and
belief, and I understand that false or incomplete information would cause invalidation of the application.
b. I shall abide by the decision of the National QIP Coordination Committee in all matters pertaining to admissions.
The decision of the Committee shall be final and binding on me.
c. I shall abide by the rules and regulations of the Institutions to which I will be offered admission, if selected.
c. For all legal actions, suits and proceedings, the jurisdiction of a court of law shall be deemed to lie exclusively at the
place at which the Institution considering me for admission is situated or the place where the office of the Principal
Coordinator QIP is located and at no other court of place.
d. I understand the contents of this form and, particularly, this declaration being made here.
Place: Signature of the Applicant
Date:
Certificate and Forwarding Note by the Principal/ Head of the Institution
a) Our Institution as well as the academic department, to which the applicant Mr./Ms. ______________________
________________________________________________________ belongs, is approved by AICTE.
b) The applicant is a full-time regular/ permanent faculty member of our Institution and is not on
deputation to any other Institution.
c) The applicant has _______________ years and __________________ months of teaching experience as on
September 30th, 2018 (Sunday) at the graduate level (Certificates enclosed).
d) The applicant will be relieved full-time for the programme on deputation and will be paid full salary and
allowances during the tenure of his/her sponsorship, if selected for admission.
Office Seal: Signature of Principal or Head of Institution
(with full contact details Name, Designation, Contact No., E-mail & AICTE affiliation No.).
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
Date:
Important Note:
Conditional Recommendation will not be accepted.
This Forwarding Note should be signed only by the Principal or the Head of the Institution.
Any alteration made in the text of this Forwarding Note leads to automatic rejection of the application.
Please attach separate experience certificate.
Please attach a copy of the receipt of online payment.
112
For any further details please contact the zonal QIP Coordinators at address indicated below:
Prof. Mahim Sagar
Principal Coordinator QIP
QIP/CEP OFFICE,
1st Floor, Wing-B, Vishwakarma Bhawan
Indian Institute of Technology Delhi
Hauz Khas, NEW DELHI–110 016
Tel.: 011–26597118, 011– 26591915
Fax: 011– 26581069
Email : [email protected]
Prof. Preeti Rao
QIP Coordinator
Indian Institute of Technology
Bombay
MUMBAI – 400 076
Tel : 022–2572 2545,
022–25767006, 022–25767048
Fax : 022-25723480
Email : [email protected]
Prof. Adrijit Goswami
Dean, CE & QIP Coordinator
Indian Institute of Technology
Kharagpur,
KHARAGPUR – 721 302
Tel : 03222–282033, 03222–283548
Fax : 03222–220508
Email : [email protected]
Prof. Jayant K. Singh
Head, QIP/CEC/CDC
Indian Institute of Technology Kanpur
Kalyanpur, KANPUR – 208 016
Tel.: 0512–2597795
0512–2597893, 0512–2597618
Fax : 0512–2596209
Email : [email protected] [email protected]
Prof. Bhupendra K. Gandhi
QIP Coordinator, QIP Centre
Indian Institute of Technology Roorkee
ROORKEE – 247667 (Uttarakhand)
Tel : 01332 – 285241 / 285247
Fax : 01332 – 286691, 273560
Email : [email protected]
Prof. A. Ramesh
Chairman, CCE & QIP Coordinator
Indian Institute of Technology Madras
CHENNAI – 600 036
Tel : 044 –22574900, 044 – 22574901
044 –22574676
09444008700/ 09444462154
Fax : 044 –22574920, 044 –22574652
044 –22574676
Email : [email protected]
Prof. Sunil Khijwania
Dean of Academic Affairs &
QIP Coordinator
Indian Institute of Technology
Guwahati
GUWAHATI – 781 039
Tel :0361–2583025, 0361–2583001
0361–2691174, 0361– 2582667
Fax : 0361–2690762
Email : [email protected]
Prof. B. K. Shrivastva
QIP Coordinator
QIP CENTRE
Indian Institute of Technology (BHU)
Varanasi (U.P.) - 221005, India
Phone/ Tele FAX: 0542 - 2369434 (o)
Email : [email protected],
Prof. Narayanan G
QIP Coordinator
Indian Institute of Science, Bangalore
BENGALURU – 560 012
Tel : 080 –22932247, 080 –23608150
080 –22932491, 080 –23600911
Fax : 080 – 23600911, 080 –23608150
Email : [email protected]
113
Prof. Mahim Sagar
Principal Coordinator QIP
Indian Institute of Technology Delhi
Hauz Khas, New Delhi – 110 016
Tel: 011-26597118, 011-26591915
Fax -011-26581069
Email - [email protected]
![INTEGRATED DISEASE SURVEILLANCE PROGRAMME (IDSP) [Compatibility Mode].pdf · Integrated Disease Surveillance Programme ... – Form P (Probable Cases): Doctors ... S,P,L forms & EWS](https://img.dokumen.tips/doc/110x75/5b1d22937f8b9a16788c006b/integrated-disease-surveillance-programme-idsp-compatibility-modepdf-integrated.jpg)
