PW200-7 - Komatsu · 2010-12-08 · net horsepower 118 kw 158 hp / 160ps operating weight 18.920 - 21.870 kg bucket capacity 0,48 m3 - 1,58 m3 pw200-7 pw 200 pw200-7 …

NET HORSEPOWER118 kW 158 HP / 160PS

OPERATING WEIGHT18.920 - 21.870 kg

BUCKET CAPACITY0,48 m3 - 1,58 m3

PW

20

0-7

PW

200

PW200-7

HYDRAULIC WHEELED EXCAVATOR

WALK-AROUND

PW200-7 HY D R AU L I C WH E E L E D EX C AVATO R

2

Productivity Features • High lifting capacity and good stability.• Heavy duty digging performance;

Large bore bucket cylinders can be installed to the 1,8 mand 2,4 m arms to greatly increase digging forces andproductivity in tough conditions.

Advanced Attachment ControlThe PW200-7 can be optionally equipped tohandle a wide variety of attachments. Theadvanced attachment control system features:• Operator selectable hydraulic flow control• Adjustable pre-sets for rapid attachment

changeover• Attachment piping options for breaker,

clamshell, crusher.

Undercarriage• Designed for high ground clearance• High oscillation angle• Virtually zero axle rocking with outboard wet

disc system• Powerful drawbar pull• Automatic 3-speed travel• Class leading 35 km/h maximum travel speed

The PW200-7 is a rugged, productive, all-European machine. Designed and expressly built for European markets,it delivers productivity, reliability and operator comforts in a robust, environmentally-friendly package. Komatsu’sexclusive, on-board, HydrauMind system assists in all operations, providing enhanced machine performancethat’s always perfectly matched to the task.

What’s new on Dash 7:• High lifting capacity

• Low fuel consumption

• Easier maintenance and serviceability

• Improved operator comfort

• Low dynamic operator noise

• Meets EC stage II emission regulations

• Advanced Attachment Control

• Multi-function colour monitor

• PW200-7 has a standard width of 2,55 m

• PW200-7 has an optional width of 2,75 m

Easy maintenance• One of the features now on the new wheeled excavator is a walkway across the

excavator superstructure, giving easy acces to the engine compartment.

PW200-7HYDRAULIC EXCAVATOR

3

NET HORSEPOWER118 kW 158 HP / 160 PS

OPERATING WEIGHT18.920 - 21.870 kg

BUCKET CAPACITY0,48 m3 - 1,58 m3

In harmony with the environment• Low emission engine

The powerful turbocharged and air-to-airaftercooled Komatsu SAA6D102E-2 provides118 kW / 158 HP. This engine meets Stage IIemissions standards with increased power andmachine productivity.

• Economy mode reduces fuel consumption• Low operating noise• Designed for easy end of life recycling

SpaceCab™The new PW200-7’s cabin space has been increasedby 14%, offering an exceptionally-roomy operatingenvironment.• Highly-pressurised cabin with optional air

conditioner • Low-noise design• Low-vibration design with cabin damper mounting• Cab moved forward for better visibility• Ergonomic control levers• Seat specially designed for wheeled machines,

with exceptional extra comfort.

Excellent reliability and durability• Reliable major components designed

and built by Komatsu• Exceptionally-reliable electronic devices

EMMSPW200-7 HY D R AU L I C WH E E L E D EX C AVATO R

EMMS. (Equipment Management and Monitoring System)

The EMMS is a highly sophisticated system, controlling and monitoring all the excavatorfunctions. The user interface is highly intuitive and provides the operator with easyaccess to a huge range of functions and operating information.

Four working modesThe PW200-7 is equipped with three working modes (A, E, B), plus a lifting mode (L). Each mode is designed tomatch the engine speed, pump speed, and system pressure to the current requirement. This provides theflexibility to match equipment performance to the job at hand.

On-screen symbols1 Travel direction

2 Service meter and clock3 Engine water gauge4 Engine water temperature warning5 Hydraulic oil gauge6 Hydraulic oil temperature warning7 Fuel gauge8 Fuel low level warming9 Working mode

10 Travel mode11 Auto deceleration12 Swing lock

1

3

5

4

9

10

2

7

6

8

12

11

2

1

7

10

9

8

12

21

17

22

16 18 20

3

5

4

6

11

13

15

14

23

19

24

4

Push-button controls switch1 ‘Working mode select

2 ‘Creep speed3 ‘High/low speed select 4 ‘Menu select key5 Undo switch6 Service menu7 Scroll up8 Scroll down9 Accept key

10 Suspension auto lock11 Suspension lock12 Control lever lock13 Engine auto deceleration14 Buzzer cancel15 Hazard warning16 Rear left outrigger/blade17 Front left outrigger/blade18 Select all chassis attachment19 Front right outrigger20 Rear right outrigger21 Lower wiper22 Heated seat23 Front and rear work lights24 Beacon warning light

Easy to see and easy to useSuperb recognition colour LCD screens for each mode. Lettersand numbers are combined with colour images for exceptionallyclear and easy to read information. The high-resolution screen iseasy to read in bright sun and in all lighting conditions.

Automatic three-speed travelThe travel speed can be automatically shifted from high to lowspeed, according to the ground conditions

High Low Auto Creep

Travel Speed 35 km/h 9,5 km/h 0-35 km/h 2,0 km/h

Fingertip hydraulic pump oil flow adjustmentFrom the LCD monitor, automatically select optimal hydraulicpump oil flow for breaking, crushing, and other operations in theB, A or E modes. Also, when simultaneously operating withattachments and work equipment, the flow to the attachment isreduced automatically, thus delivering smooth movement of thework equipment.

Password protection Prevent unauthorized machine transport. The engine cannot bestarted without your four-digit password. For total security, thebattery is connected directly to the starter motor, and it and theengine both need the password. The password can be activatedon request.


5

Working Application AdvantageModeA Active mode • Maximum production/power

• Fast cycle times

E Economy mode • Excellent fuel economy

B Breaker mode • Optimal engine rpm and hydraulic flow

L Lifting mode • Hydraulic pressure is increased by 7%

Active Mode

For maximum power and fastcycle times. Normally used forheavy operations such as harddigging and loading. Thismode allows access to the‘Power Max’ function totemporarily increase diggingforce by 7% for added powerin tough situations.

Economy mode

The environmentally-friendlymode. Run more quietly duringoperations at night and/or inurban areas. Fuel consumptionis reduced by 20% andexhaust emissions are alsoreduced.

Breaker mode

Delivers optimal hydraulicpressure, flow and engineRPMs for powerful breakeroperations.

Lifting mode

Increases the lifting capacity7% by raising the hydraulicpressure. This mode supportssafe lifting operations.

Hydraulic flow general adjustmentscreen in B ( breaker) mode.

Fine tune hydraulic flow adjustmentscreen in B (breaker) mode.

Fine tune hydraulic flow adjustmentscreen in A (Active) or E (economy)mode.

Password screen.

WORKING ENVIRONMENT


6

PW200-7’s cab interior is spacious andprovides a comfortable workingenvironment…

SpaceCab™Comfortable cabThe new PW200-7 inner cab volume is 14%greater than the dash 6, offering an exceptionally-comfortable operating environment. The large cabenables the seat back, with headrest, to bereclined horizontal.

Pressurised cabThe standard-equipped air conditioner, air filterand a higher internal air pressure resist dust entryinto the cab.

Low-noise designNoise levels are substantially reduced; enginenoise as well as swing and hydraulics operationsnoise.

Cab damper mounting for low vibrationlevelsPW200-7 uses a new and improved viscousdamping cab mount system that incorporates alonger stroke plus an added spring. The new cabdamper mounting, combined with strengthenedleft and right-side decks, aids the reduction ofvibrations to the operator’s seat.

Outer air filter

Easy cleaning of air conditioner filter

Easy removal/installation of air conditioner filter element, without tools facilitates easier cleaning.

Climate controlLarge sun roof with integratedsun shade

12-volt power supply and(optional) radio cassette

Tiltable steering wheel with se-veral functions; wiper control,indicator, horn, and head lights

Rubber

Silicon Oil

Spring


7

Ergonomic3 button lever

Multi-position controlsThe multi-position, proportional pressure control leversallow the operator to work in comfort whilstmaintaining precise control. A double-slide mechanismallows the seat and controllers to move together, orindependently, allowing the operator to position thecontrollers for maximum productivity and comfort.

Defroster/Demister

Hot and cool box

Seat sliding range:340 mm - increased by120 mm over dash 6

Safety FeaturesImproved, wide visibility

The right side window pillar has been removed and the rearpillar is narrower to provide greater visibility. Blind spots have

been decreased by 34% compared to the dash 6 cabin.

Pump/engine room partition Prevents hydraulic oil from spraying onto the engine to

reduce the risk of fire.

Thermal and fan guards Placed around high-temperature parts of the engine. The fan

belt and pulleys are well protected.

Steps with non-slip surface and large handrailSteps with non-slip surfacing ensure safer maintenance.

Large handrail forsafe access

Thermal guard

Non slip sheet

FLEXIBILITY


8

ARMS BOOMSOne piece boom

Two piece boom

1800 mm arm

5700 mm

5410 mm

2400 mm arm

2900 mm arm

3500 mm arm

Parallel Blade

Outriggers

Additional hydraulic circuits

A2-way additional hydraulic circuit, electrically controlledfrom the wrist control levers, is fitted as standard.

Outriggers

Independently controlled outriggers are optionallyavailable on both, the front and rear of the machine.The cylinder protections are standard on the outriggers.

9

Outriggers

The PW200-7 can be specified with an enormous rangeof work-equipment and undercarriage attachments tomeet the needs of almost any application.

Parallel blade

Toolbox

Tough, secure toolboxes, integrated in the mudguardsare fitted on both sides of the undercarriage.

Dozer blade

A parallel blade is available with standard cylindersprotector for both the front and rear of the machine.

Attachments commonality & functionalityThe stabilizer and dozer blade are interchangeable, andtherefore can be attached on the front or rear of the chassis.The stabilizer and dozer blade are controllable from the monitorpanel. The monitor panel has five buttons that allow individualattachment operation as well as collective operation.


High production levels and low fuelconsumptionThe increased output and fuel savings of theKomatsu engine result in increased production, plusimproved production per litre of fuel.

EngineThe PW200-7 gets its exceptional power and workcapacity from a Komatsu SAA6D102E-2 engine.Output is 118 kW / 158 HP, providing increasedhydraulic power and improved fuel efficiency.

HydraulicsThe unique two-pump systemensures smooth,simultaneousmovement of thework equipment.Komatsu’s exclusiveHydrauMind systemcontrols both of thepumps for most-efficient use ofengine power. Thesystem alsoreduces hydraulicloss duringoperations.Optional, additionalhydrauliccircuits may beordered.

PRODUCTIVITY FEATURES


10

Safe and precise lifting PW200-7’s stability is one of the best in his class.The machine is equipped with boom safety valvesand overload caution as standard. This combinedwith the control of HydrauMind and the power of thelifting mode, gives incredible safe and precise liftingperformance.Example: The over-side lifting capacity (reach 6 m,height 6 m) has a capacity of 5,3 tonnes.Front outriggers + rearblade and two piece boomwith 2,4 m arm.

Larger arm crowd force and digging forceprovide increased production.Large bore cylinders can be installed to the supershort and short arms to greatly increase diggingforces and productivity in tough conditions.

Power Max functionPower max can be selected by depressing a joystickbutton for an instant burst of power to help breakthrough tough digging situations. The power Maxfunction is available in the A and E working mode.

Bucket digging force*(**): 15,190 kg 17,950 kgArm crowd force*: 13,150 kg

* Measured with Power Max function, 1800mm arm and ISO rating

** With optional large bucket cylinder


11

EASY OPERATION

As well as operating the standard work equipment movements, the RH wristcontrol lever is also used to operate the undercarriage. When used inconjunction with the selection switch on the control panel, full independentcontrol of outriggers and dozer blade is immediately available. This feature,together with the automatic axle lock, enables the machine to be moved,stabilized and operated extremely quickly.

Clamshell/breaker control

Clockwise clamshellrotation. Also used for

breaker operation whenB.O. mode is selected.

Clamshellcontrol

Anti-clock wiseclamshell rotation.

UndercarriageattachmentcontrolAfter a single touch,the lever can beused to preciselyoperate theselectedundercarriageattachment.After operating theundercarriageattachments, asingle touch revertsthe lever intostandard boomoperation.

Travel controlA rock button is installed on the right hand lever, it controls the travel operation into forward, neutral and rear.

From the consistent weighting of the steering to the predictable and precise operation of the travel and brakepedals, the operator will always feel in complete control during traveling.

Travel pedal

VHMSPW200-7 HY D R AU L I C WH E E L E D EX C AVATO R

12

VHMS (Vehicle Health Monitoring System)

VHMS’s precise health-check system indicates all of the machine’srunning conditions. At the beginning of, and during, each work shift,abnormality information and machine functions can be checked fromthe operator’s seat.

New features: VHMS Machine health monitoring• Failures are indicated with a 6-digit failure code• Up to four different mechanical system measurements can be

monitored at the same time• A “Maintenance Indicator” function has been added. (Filter and oil

replacement time display function)• Mechanical system failures are now monitored, in addition to

electrical system failures.

Displays running conditions and abnormalityindicationsAt the operator’s fingertips: the VHMS controller monitors engine oillevel, cooling water level, fuel level, engine water temperature, engineoil pressure, battery charging level, air filter clogging, and more. The monitor also indicates whenever abnormalities are detected.

Maintenance alert assistanceThe VHMS monitor alerts when oil and filters need to be replaced.

Operation data memoryThe system memorises machine operating data such as engineoutput, hydraulic pressure, and more.

Trouble data memoryThe monitor stores and recalls electrical system and mechanicalsystem failures and abnormalities for effective troubleshooting.Twenty most-recent electrical system failures are stored. Mechanical system failures cannot be erased, ensuring accuratedocumentation of vital service management information.

VHMS ‘real time monitoring system’The ‘real time monitoring system’ displays up to four differentoperating parameters simultaneously, giving the mechanic a totaloverview for faster troubleshooting. Parameters include operatingconditions such as hydraulic oil pressure, engine RPMs, differentvoltages current, and even temperature measurement.

Backlight switched off

Real Time Monitoring

Backlight switched on


13

Reducing maintenance costsExtended replacement intervals for engine oil and filtersNew, high-performance filters are used in the hydraulic circuit and engine. Replacement intervals for the hydraulic oil filter are significantly extended, reducing maintenance costs.

Replacement intervals table: unit: hoursPW200-7

Engine oil 500Engine oil filter 500Hydraulic oil 5.000Hydraulic oil filter 1.000

Designed and built for strengthUsing the latest computer aided design techniques and exhaustive testing, the boom and armdesings have been optimised for strength and durability. The boom top and bottom plates aremanufactured from single plates, again to distribute loads evenly and avoid potential weak points.

The highly automated manufacturing process uses the very latest equipment and quality controltechniques. Critical welding is carried out by robots to ensure an extremely high quality andconsistent product.

Precision engineered pin and bush system. The key work equipment joints use a chrome plated pinand bronze bushing system to provide minimal play and extended durability.

Trouble Data memory Maintenance record Maintenance mode change

MAINTENANCE FEATURES


14

Komatsu designed the PW200-7 to have easy service access. By doing this,routine maintenance and servicing are less likely to be skipped. This can mean areduction in costly downtime later on. Here are some of the many service featuresfound on the PW200-7.

Easy radiator cleaning‘Size by side’ orientation and large finpitch facilitate easy radiator cleaning.

Water separatorStandard equipment, which removesany water that has become mixed withthe fuel, preventing fuel systemdamage.

Easy access to engine oilfilter and fuel drain valveEngine oil filter is easily accessiblefrom service platform. Fuel drainvalve remotely mounted toimprove acces.

Auto greasing (optional)A factory-installed CentralLubricating System (CLS) ensuresproper lubrication and savesdriver maintenance downtime.Factory installation includeswelding protective, heavy-dutyline shielding onto the dipper armduring the manufacturingprocess, before painting. TheCentral Lubrication system usereinforced hoses to carry thelubricant to all of the lubricationpoints, and is governed byseveral distribution blocks.Lubrication cycles may beadjusted at operator’s preference.

Easy maintenance

SPECIFICATIONS


15

ENGINE

HYDRAULIC SYSTEM

Type ................................. 6 cylinder, direct injection, emissionised,turbocharged, after-cooled diesel.

Model ......................................................... Komatsu SAA6D102E-2Power ratingISO 09249 (Net) ................. 118 kW (158 HP / 160 PS) at 1950 rpmBore x stroke ...................................................... 102 mm x 120 mmPiston displacement .............................................................. 5,88 ltrAir-cleaner and cooling .............. Double element type with monitor

panel dust indicator and auto dust evacuator.Suction type cooling fan.

Type ................................. HydrauMind. Closed-centre system withload sensing and pressure compensation valves.

Additional circuits ....................... Depending on specification up to2 additional circuits can be installed.

Main pump .......................... 2 variable displacement piston pumpssupplying boom, arm, bucket, swing and travel circuits.

Maximum pump flow ............................................. 2 x 218,4 ltr/minMaximum pressuresImplement ...................................................................... 380 kg/cm2

Travel .............................................................................. 380 kg/cm2

Swing .............................................................................. 295 kg/cm2

Pilot circuit ..................................................................... 36,7 kg/cm2

STEERING SYSTEM

Steering control ...................................... Hydraulic steering systemsupplied from a separate gear pump and

controlled through LS orbitrol & priority valves.Minimum turning radius for 2,5m wide axles ................. 6.850 mm

(to center of outer wheel)for 2,75m wide axles ................ 7.050 mm

(to center of outer wheel)

TRANSMISSION

Type ......................... Fully automatic power shift transmission withpermanent 4 wheel drive

Travel motors ........... one variable displacement axial piston motorMaximum pressure ......................................................... 380 kg/cm2

Travel modes ........................................................... 3 travel modes:Hi ......................................................................................... 35 km/hLo ....................................................................................... 9,5 km/hCreep .................................................................................. 2,0 km/hA max. speed restriction of 20 km/h is available as an option.Max. tractive effort ........................................................... 12.000 kgFront axle load ................................................ lower than 12.000 kgRear axle load .................................................. lower than 12.000kgAxle oscillation .................................... 11° Lockable in any position

from the operator cab.

ELECTRICAL SYSTEM

Alternator ........................................................... 24 Volt - 45 ampereBatteries .............................................................. 2 x 12 Volt - 95AhStarter motor .......................................................... 24 Volt - 5,5 kW

BRAKE SYSTEM

Type ............... Dual circuit hydraulic braking system supplied froma separate gear pump.

Service brakes .... Pedal actuated wet multi-disc brakes integratedInto the axle hubs.

Parking brake .............. Electrically actuated wet multi-disc “springActuation hydraulic release” brake integrated

Into the transmission.

SWING SYSTEM

Type ............................................ Axial piston motor driving throughplanetary double reduction gearbox.

Swing lock ................................ Electrically actuated wet multi-discbrake integrated into swing motor. An additional mechanical pin can

be engaged from inside the operator cab.Swing speed ............................................................... 0 to 12,4 rpm

ENVIRONMENT

Engine emissions .................................. Fully complies with stage 2exhaust emission regulations.

Noise levels ............... LWA External noise 104 dB (A) (2000/14/EC)LPA Operator ear noise 74 dB (A) (ISO 6396 dynamic noise)

SERVICE / REFILL CAPACITY

Fuel tank .............................................................................. 370,0 ltrRadiator ................................................................................. 23,0 ltrEngine ................................................................................... 26,3 ltrSwing drive .............................................................................. 6,6 ltrHydraulic tank ..................................................................... 166,0 ltrTransmission ........................................................................... 2,9 ltrFront differential ......................................... 11,5 liter for 2,5m width

13,5 liter for 2,75m widthRear differential ............................................. 10 liter for 2,5m width

14 liter for 2,75m widthFront axle hub ....................................................................... 2,85 ltrRear axle hub .......................................................................... 2,0 ltrSwing pinion grease amount ................................................ 33,0 ltr

OPERATION WEIGHT (APPROXIMATE)

Operating weight, including 5.7 m one-piece boom, or 5,4 two pieceboom, 2,4 m arm, operator, lubricant, coolant, full fuel tank and thestandard equipment. Weights are with 0,8 m3 bucket.

Undercarriage type Operating weight Operating weightMono boom two piece boom

2,5m wide 2,75m wide 2,5m wide 2,75m wideRear blade 19.850 Kg 20.170 Kg 20.530 Kg 20.850 KgRear outrigger 19.980 Kg 20.340 Kg 20.660 Kg 21.020 KgFour outriggers 20.990 Kg 21.420 Kg 21.670 Kg 22.100 KgFront outrigger + blade 20.860 Kg 21.270 Kg 21.540 Kg 21.950 Kg

WORKING RANGES


16

MONO BOOM

Arm length 1,8 m 2,4 m 2,9 m 3,5 m

A Max. digging height 9.467 mm 9.883 mm 10.003 mm 10.438 mm

B Max. dumping height 6.704 mm 7.057 mm 7.229 mm 7.612 mm

C Max. digging depth 4.791 mm 5.402 mm 5.917 mm 6.500 mm

D Max. vertical wall digging depth 4141 mm 4745 mm 5227 mm 5809 mm

E Max. digging depth of cut for 2,44 m level 4575 mm 5225 mm 5763 mm 6366 mm

F Max. digging reach 9.061 mm 9.651 mm 10.060 mm 10.642 mm

G Max. digging reach at ground level 8.867 mm 9.438 mm 9.875 mm 10.478 mm

H Min. swing radius 3.906 mm 3.201 mm 3.143 mm 3.148 mm


17

TWO PIECE BOOM

Arm length 1,8 m 2,4 m 2,9 m 3,5 m

A Max. digging height 9.532 mm 9.842 mm 10.168 mm 10.434 mm

B Max. dumping height 6.670 mm 6.982 mm 7.298 mm 7.574 mm

C Max. digging depth 5.186 mm 5.785 mm 6.285 mm 6.860 mm

D Max. vertical wall digging depth 4104 mm 4666 mm 5208 mm 5768 mm

E Max. digging depth of cut for 2,44 m level 5119 mm 5713 mm 6226 mm 6793 mm

F Max. digging reach 8.818 mm 9.348 mm 9.822 mm 10.338 mm

G Max. digging reach at ground level 8.599 mm 9.144 mm 9.634 mm 10.156 mm

H Min. swing radius 2.594 mm 3.121 mm 2.745 mm 2.866 mm

DIMENSIONS & UNDERCARRIAGE


18

2541 mm (2785 mm)

(2124 mm)1914 mm

627 mm(661 mm)Tyre size:Twin: 10-20-14 Pr x 8 Axle 2,5 m

10-20-14 Pr x 8 Axle 2,75 m

? mm

3234

mm

(32

48 m

m)

2516 mm

2750 mm

3827 mm (3859 mm)

4540 mm

4540 mm

? mm

2360 mm

1327 mm

(1341 mm

)

? mm ? mm

PAR = 4326 mm

? mm

? mm ? mm ? mm ? mm

? mm

? mm

PAR = ? mm

? mm

Machine is raised by 128 mmwhen operating outriggers

Rear blade Front blade / Rear outrigger Undercarriage with outriggers out

Four outriggers Front outrigger / Rear blade

? mm

Undercarriage with blade

Machine is raised by 90 (76) mmwhen operating outriggers

( ) : figures for 2,75 m axle

2516 mm

2541 mm (2750 mm)

330 mm(345 mm)

3234

mm

(324

8 m

m)

Tyre size:Twin: 10-20-14 Pr x 8 Axle 2,5 m

11-20-14-Pr x 8 Axle 2,75 m

2700 mm

4539 mm (4555 mm)

2640 mm

(2655 mm

)

2342 mm

(2356 mm

)

1327 mm

(1341 mm

)

4340 mm (4365 mm)

4326 mm

1450 mm 1060 mm

4925 mm

1300 mm 1450 mm1075 mm 1100 mm

465 mm

(480 mm

)

3745 mm (3945 mm)

331 mm (10.00 - 20 tyres)(345 mm) (11.00 - 20 tyres)

90 mm (10.00 - 20 tyres)76 mm (11.00 - 20 tyres)

4965 mm4335 mm (4360 mm)

5115 mm2550 mm

(2750 mm)

331

mm

(345

mm

)

ARM A B C D

1,8 m 9.479 mm 3906 mm 9705 mm 3266 mm

2,4 m 9435 mm 3895 mm 9659 mm 3196 mm

2,9 m 9427 mm 3912 mm 9596 mm 3018 mm

3,5 m 9467 mm 3985 mm 9639 mm 3570 mm


19

TRANSPORTATION DIMENSIONS

TWO PIECE BOOM

MONO BOOMDRIVING POSITION TRANSPORT POSITION

DRIVING POSITION TRANSPORT POSITION

* Dimensions are to piping

3,5 mArm length

BUCKET AND ARM COMBINATION

BUCKET AND ARM FORCE

1,8 m 2,4 m

A wide variety of buckets & attachments is available.Contact your local dealer for more information.

� : material weight up to 1.8 t/m3



- : do not use

2,9 m

Bucket Force 16.620 kg* 16.620 kg* 14.170 kg 14.170 kg

Bucket Force, ‘Power max’ 17.950 kg* 17.950 kg* 15.190 kg 15.190 kg

Arm Force 13.800 kg 12.200 kg 10.300 kg 8.500 kg

Arm Force, ‘Power Max’ 14.800 kg 13.000 kg 11.000 kg 9.100 kg

* With optional large bucket cylinder

ARM A B C D

1,8 m 7070 mm 3980 mm 9466 mm 3040 mm`

2,4 m 7078 mm 3980 mm 9470 mm 3152 mm

2,9 m 7000 mm 3997 mm 9289 mm 3095 mm

3,5 m 7218 mm 4505 mm 9225 mm 3715 mm* Dimensions are to piping

The recommendations are given as a guide only, based on typical operating conditions.

PW200-7 - 2,5 m axle PW200-7 - 2,75 m axle

1,8 m 2,4 m 2,9 m 3,5 m 1,8 m 2,4m 2,9 m 3,5 m

� � � � � � � �� – � � � �� – � � � �� – – � � � –

– – – – � – – –

– – – – � – – –

– – – – – – – –

BUCKET AND ARM COMBINATIONCapacity

Width m3 SAE Weight

600 mm 0,48 m3 480 kg

700 mm 0,55 m3 530 kg

800 mm 0,63 m3 580 kg

900 mm 0,71 m3 610 kg

1.000 mm 0,78 m3 650 kg

1.100 mm 0,86 m3 700 kg

1.200 mm 0,96 m3 760 kg

1.300 mm 1,03 m3 810 kg

1.400 mm 1,11 m3 870 kg

1.500 mm 1,19 m3 930 kg

1.600 mm 1,49 m3 1.100 kg

1.700 mm 1,58 m3 1.150 kg

1.800 mm 1,68 m3 1.200 kg

LIFTING CAPACITY


20

Lifcapacity for 2,5 m wide undercarriage / 2,75 m wide undercarriage is available as option* Load is limited by hydraulic capacity rather than tipping.Ratings are based on SAE Standard No. J1097.Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.

3,0 m

ON

E-P

IEC

E B

OO

M

Arm length

A

B

7,5 m 6,0 m 4,5 m

When removing bucket, linkage or cylinder, lift-ing capacities can be increased by their respec-tive weights

Arm length 1.800 mm

Front outrigger + rear blade 7.5 m kg *4.850 *4.8506.0 m kg *4.500 4.000 *7.600 5.0504.5 m kg *4.500 3.250 *4.500 3.250 7.800 4.900 *10.300 8.000 *15.800 *15.8003.0 m kg 4.700 2.900 5.150 3.200 7.550 4.650 *11.550 7.3001.5 m kg 4.550 2.800 5.050 3.100 7.200 4.350 *11.700 6.7500.0 m kg 4.700 2.850 4.950 3.050 6.950 4.150 *10.550 6.600

-1.5 m kg *4.800 3.200 *6.600 4.150 *8.600 6.600 *8.550 *8.550-3.0 m kg *3.700 *3.700 *4200 *4200 *5.800 *5.800

Rear outrigger 7.5 m kg *4.800 4.4506.0 m kg *4.450 3.000 *7.450 3.8504.5 m kg *4.400 2.400 *4.450 2.400 *7.850 3.700 *10.150 6.000 *15.600 11.800.3.0 m kg *4.650 2.150 5.600 2.350 *8.250 3.450 *11.400 5.4001.5 m kg 4.950 2.000 5.500 2.250 8.050 3.200 *11.500 4.9000.0 m kg 5.100 2.100 5.400 2.200 *7.750 3.000 *10.350 4.700

-1.5 m kg *4.750 2.350 *6.500 3.000 *8.450 4.750 *8.400 *8.400 -3.0 m kg *3.600 3.000 *4.100 3.200 *5.700 4.900

Without stabilizer 7.5 m kg *5.150 3.3006.0 m kg *3.550 2.150 4.600 2.9004.5 m kg 2.900 1.700 2.900 1.700 4.450 2.750 7.300 4.5003.0 m kg 2.550 1.450 2.850 1.650 4.200 2.500 6.650 3.9001.5 m kg 2.450 1.350 2.750 1.550 3.950 2.300 6.100 3.4500.0 m kg 2.550 1.400 2.700 1.500 3.700 2.050 5.900 3.300

-1.5 m kg 2.850 1.600 3.700 2.050 5.950 3.300 *8.450 6400-3.0 m kg *3.500 2.100 3.900 2.250 *5.700 3.450

– Reach from swing center

– Bucket hook height

– Lifting capacities, includingbucket 760 kgbucket linkage (240 kg) andbucket cylinder (136 kg)

– Rating over front

– Rating over side

– Rating at maximum reach

A

B

C

TW

O-P

IEC

E B

OO

M

Outrigger front + rear 7.5 m kg *5.100 *5.100 *6.500 *6.5006.0 m kg *4.600 *4.600 *6.150 *6.150 *6.650 *6.6504.5 m kg *4.500 4.350 *6.550 6.200 *7.900 *7.900 *11.200 *11.2003.0 m kg *4.700 3.850 5.850 4.000 *7.300 5.900 *9.550 9.4001.5 m kg *5.100 3.700 5.700 3.900 *8.000 5.650 *11.150 8.9000.0 m kg 5.650 3.800 5.650 3.850 8.100 5.400 *11.450 8.600

-1.5 m kg 6.400 4.300 *7.950 5.350 *10.850 8.600 *12.250 *12.250-3.0 m kg *9.150 8.750

Front outrigger + rear blade 7.5 m kg *5.100 *5.100 *6.500 *6.5006.0 m kg *4.600 4.450 *6.150 5.150 *6.650 *6.6504.5 m kg *4.500 3.500 *6.550 *5.050 *7.900 *7.900 *11.200 *11.2003.0 m kg *4.700 3.100 5.700 3.250 *7.300 4.800 *9.550 7.4501.5 m kg *5.100 2.950 5.600 3.150 *8.000 4.500 *11.150 7.0000.0 m kg 5.500 3.050 5.500 3.050 *7.900 4.300 *11.450 6.700

-1.5 m kg 6.200 3.450 7.900 4.250 *10.850 6.700 *12.250 *12.250-3.0 m kg *9.150 6.850

Rear outrigger 7.5 m kg *5.050 *5.050 *6.400 **6.4006.0 m kg *4.550 3.300 *6.050 3.900 *6.550 *6.5504.5 m kg *4.450 2.600 6.400 3.800 *7.750 6.250 *11.000 *11.0003.0 m kg *4.600 2.250 5.700 2.350 *7.150 3.550 *9.400 5.4001.5 m kg *5.050 2.150 5.600 2.250 *7.850 3.300 *10.950 5.0000.0 m kg 5.500 2.200 5.500 2.200 8.050 3.100 *11.300 4.750

-1.5 m kg 6.250 2.500 7.800 3.050 *10.650 4.750 *12.050 9.300-3.0 m kg *8.950 4.900

Without stabilizer 7.5 m kg *5.050 3.900 *6.400 5.0006.0 m kg 4.000 2.450 4.650 2.900 *6.550 5.0504.5 m kg 3.150 1.850 4.550 2.800 7.600 4.650 *11.000 9.0003.0 m kg 2.750 1.550 2.900 1.650 4.300 2.550 5.700 3.9001.5 m kg 2.650 1.450 2.800 1.550 4.050 2.350 6.300 3.5500.0 m kg 2.700 1.500 2.700 1.500 3.800 2.150 6.000 3.300

-1.5 m kg 3.050 1.700 3.800 2.100 6.000 3.300 *12.050 6.250-3.0 m kg 6.150 3.450


Arm length 1.800 mm







A

B

C

Outrigger front + rear 7.5 m kg *4.800 *4.8006.0 m kg *4.450 *4.450 *7.450 6.2004.5 m kg *4.400 4.000 *4.450 4.000 *7.850 6.050 *10.150 10.000 *15.600 *15.6003.0 m kg *4.650 3.600 6.200 3.950 *8.250 5.750 *11.400 9.2501.5 m kg *5.100 3.500 6.050 3.850 *8.350 5.450 *11.500 8.6500.0 m kg *5.350 3.600 *5.750 3.800 *7.750 5.250 *10.350 8.450

-1.5 m kg *4.750 4.050 *6.500 5.250 *8450 *8.450 *8.400 *8.400-3.0 m kg *3.600 *3.600 *4.100 *4.100 *5.700 *5.700


21


3,0 m

ON

E-P

IEC

E B

OO

M

Arm length

A

B

7,5 m 6,0 m 4,5 m


Arm length 2.400 mm

Front outrigger + rear blade 7.5 m kg *4.350 *4.350 *5.100 *5.1006.0 m kg *4.100 3.500 *6.900 5.150 .4.5 m kg *4.100 2.900 5.300 3.350 *7550 5.000 *9.600 8.2003.0 m kg 4.200 2.600 5.200 3.250 7.650 4.750 *11.000 7.4501.5 m kg 4.100 2.500 5.050 3.100 7.350 4.450 *11.850 7.0000.0 m kg 4.200 2.550 4.950 3.000 7.000 4.200 *11.250 6.700

-1.5 m kg 4.650 2.800 4.900 3.000 6.900 4.100 *9.650 6.600 *9.900 *9.900-3.0 m kg *4.000 3.450 *5.400 4.250 *7.200 6.700 *8.400 *8.400

Rear outrigger 7.5 m kg *4.250 3.650 *5.050 3.9006.0 m kg *4.000 2.600 *6.800 3.9504.5 m kg *4.050 2.150 5.800 2.500 *7.450 3.800 *9.450 6.2503.0 m kg *4.200 1.900 5.650 2.400 *8.050 3.550 *10.850 5.5501.5 m kg 4.450 1.800 5.500 2.300 8.200 3.300 *11.650 5.1000.0 m kg 4.550 1.850 5.400 2.200 7.850 3.050 *11.050 4.800

-1.5 m kg *4.650 2.050 *5.150 2.150 *7.050 2.950 *9.500 4.750 *9.750 9.350-3.0 m kg *3.950 2.500 *5.300 3.100 *7.100 4.850 *8.200 *8.200

Without stabilizer 7.5 m kg *4.250 2.700 4.650 2.9506.0 m kg 3.150 1.900 4.700 3.0004.5 m kg 2.600 1.500 3.000 1.800 4.550 2.850 7.550 4.7003.0 m kg 2.300 1.300 2.900 1.700 4.300 2.600 6.800 4..0501.5 m kg 2.200 1.200 2.800 1.600 4.050 2.350 6.300 3.6500.0 m kg 2.250 1.250 2.700 1.500 3.750 2.100 6.000 3.350

-1.5 m kg 2.500 1.400 2.650 1.450 3.650 2.050 5.950 3.300 *9.750 6.300-3.0 m kg *3.050 1.750 3.800 2.150 6.050 3.400 *8.200 6.550







A

B

C

TW

O-P

IEC

E B

OO

M

Outrigger front + rear 7.5 m kg *4.500 *4.5006.0 m kg *4.150 *4.150 *5.450 *5.4504.5 m kg *4.100 3.850 *5.450 4.200 *5.950 *5.950 *7.000 *7.0003.0 m kg *4.250 3.450 *5.800 4.100 *6.850 6.000 *8.900 *8.9001.5 m kg *4.600 3.300 5.750 3.950 *7.700 5.700 *10.650 9.1500.0 m kg 5.000 3.400 5.650 3.850 *8.200 5.450 *11.450 8.750

-1.5 m kg 5.550 3.750 5.600 3.800 8.050 5.350 *11.250 8.600 *11.150 *11.150-3.0 m kg *6.100 4.650 *7.250 5.400 *10.050 8.700 *14.250 *14.250

Front outrigger + rear blade 7.5 m kg *4.500 *4.5006.0 m kg *4.150 3.800 *5.450 5.3004.5 m kg *4.100 3.100 *5.450 3.400 *5.950 5.150 *7.000 *7.0003.0 m kg *4.250 2.800 5.750 3.300 *6.850 4.900 *8.900 7.9001.5 m kg *4.600 2.650 5.600 3.150 *7.700 4.600 *10.650 7.2000.0 m kg 4.850 2.700 5.500 3.050 8.000 4.350 *11.450 6.850

-1.5 m kg 5.400 3.000 5.450 3.050 7.850 4.250 *11.250 6.700 *11.150 *11.150-3.0 m kg *6.100 3.700 *7.250 4.300 *10.050 6.800 *14.250 *14.250

Rear outrigger 7.5 m kg *4.400 4.0506.0 m kg *4.100 2.850 *5.350 4.0504.5 m kg *4.050 2.300 *5.350 2.500 *5.850 3.900 *6.850 6.4503.0 m kg *4.200 2.000 *5.700 2.450 *6.700 3.650 *8.750 5.8501.5 m kg *4.550 1.900 5.650 2.300 *7.550 3.350 *10.500 5.2500.0 m kg *4.900 1.950 5.550 2.200 *8.050 3.150 *11.300 4.850

-1.5 m kg 5.450 2.150 5.500 2.150 8.000 3.050 *11.100 4.750 *10.950 9.300-3.0 m kg *6.000 2.700 *7.100 3.100 *9.900 4.850 *14.050 9.550

Without stabilizer 7.5 m kg *4.400 3.0506.0 m kg 3.450 2.050 4.850 3.0504.5 m kg 2.800 1.600 3.050 1.800 4.700 2.900 *6.850 4.9003.0 m kg 2.450 1.400 2.950 1.700 4.400 2.650 7.200 4.3001.5 m kg 2.350 1.300 2.800 1.600 4.100 2.400 6.500 3.7600.0 m kg 2.400 1.300 2.700 1.500 3.900 2.200 6.100 3.400

-1.5 m kg 2.650 1.450 2.700 1.450 3.750 2.100 6.000 3.300 *10.950 6.200-3.0 m kg 3.300 1.850 3.850 2.150 6.050 3.350 12.800 6.450


Arm length 2.400 mm







A

B

C

LIFTING CAPACITY

Outrigger front + rear 7.5 m kg *4.350 *4.350 *5.100 *5.1006.0 m kg *4.100 *4.100 *6.900 6.3004.5 m kg *4.100 3.600 5.900 4.100 *7.550 6.150 *9.600 *9.6003.0 m kg *4.300 3.250 5.800 4.000 *8.150 5.850 *11.000 9.4501.5 m kg 4.550 3.150 5.650 3.900 8.250 5.600 *11.850 8.9000.0 m kg 4.700 3.200 5.550 3.800 7.950 5.300 *11.250 8.550

-1.5 m kg *4.750 3.550 *5.250 3.750 *7.200 5.200 *9.650 8.500 *9.900 *9.900-3.0 m kg *4.000 *4.000 *5.400 5.350 *7.200 *7.200 *8.400 *8.400

LIFTING CAPACITY


22


3,0 m

ON

E-P

IEC

E B

OO

M

Arm length

A

B

7,5 m 6,0 m 4,5 m


Arm length 2.900 mm

Front outrigger + rear blade 7.5 m kg *2.700 *2.700 *4.500 *4.5006.0 m kg *2.600 *2.600 *3.900 3.400 *5.400 5.2504.5 m kg *2.600 2.550 5.350 3.350 *6.700 5.0503.0 m kg *2.700 2.350 5.200 3.250 7.700 4.800 *10.550 7.750 *16.950 15.9501.5 m kg *2.950 2.250 5.050 3.100 7.400 4.500 *11.650 7.1000.0 m kg *3.350 2.300 4.950 3.000 7.050 4.200 *11.550 6.700 *6.050 *6.050

-1.5 m kg *4.050 2.500 4.850 2.950 6.850 4.050 *10.350 6.550 *9.300 *9.300-3.0 m kg *5.350 3.150 *4.000 2.950 *6.050 4.100 *8.200 6.600 *10.400 *10.400

Rear outrigger 7.5 m kg *2.650 *2.650 *4.450 4.0506.0 m kg *2.550 2.250 *3.850 2.550 *5.300 4.0004.5 m kg *2.550 1.650 *5.300 2.550 *6.600 3.8503.0 m kg *2.650 1.450 5.700 2.400 *7.750 3.600 *10.350 5.800 *16.700 11.2001.5 m kg *2.900 1.400 5.550 2.300 8.250 3.350 *11.450 5.2000.0 m kg *3.250 1.400 5.400 2.150 7.900 3.050 *11.350 4.850 *5.950 *5.950

-1.5 m kg *3.900 1.500 5.300 2.100 *7.400 2.900 *10.150 4.700 *9.200 *9.200-3.0 .m kg *3.900 1.800 *3.950 2.150 *5.950 2.950 *8.050 4.750 *10.200 9.400

Without stabilizer 7.5 m kg *2.650 2.250 *4.450 3.0506.0 m kg *2.550 1.600 3.100 1.850 4.800 3.0504.5 m kg 2.300 1.300 3.050 1.850 4.600 2.9003.0 m kg 2.050 1.100 2.900 1.700 4.350 2.650 7.100 4.300 14.600 7.9501.5 m kg 1.950 1.050 2.800 1.600 4.050 2.400 6.450 3.7500.0 m kg 2.000 1.050 2.650 1.500 3.800 2.150 6.050 3.400 *5.950 *5.950

-1.5 m kg 2.200 1.150 2.600 1.400 3.600 1.950 5.900 3.250 *9.200 6.200-3.0 m kg 2.600 1.450 2.650 1.450 3.650 2.050 5.950 3.300 *10.200 6.400







A

B

C

TW

O-P

IEC

E B

OO

M

Outrigger front + rear 7.5 m kg *2.850 *2.850 *4.250 *4.2506.0 m kg *2.650 *2.650 *3.250 *3.250 *4.850 *4.8504.5 m kg *2.600 *2.600 *5.000 4.250 *5.450 *5.450 *6.150 *6.1503.0 m kg *2.700 *2.700 *5.450 4.100 *6.350 6.100 *8.100 *8.100 *12.550 *12.5501.5 m kg *2.950 *2.950 5.800 3.950 *7.300 5.750 *10.050 9.300 *6.450 *6.4500.0 m kg *3.350 3.050 5.650 3.800 *8.000 5.500 *11.250 8.800 *7.050 *7.050

-1.5 m kg *4.000 3.350 5.550 3.750 8.000 5.300 *11.400 8.550 *10.350 *10.350-3.0 m kg *5.350 4.000 *7.650 5.300 *10.550 8.550 *15.450 *15.450

Front outrigger + rear blade 7.5 m kg *2.850 *2.850 *4.250 *4.2506.0 m kg *2.650 *2.650 *3.250 *3.250 *4.850 *4.8504.5 m kg *2.600 *2.600 *5.000 3.450 *5.450 5.250 *6.150 *6.1503.0 m kg *2.700 2.500 *5.450 3.350 *6.350 4.950 *8.100 8.100 *12.550 *12.5501.5 m kg *2.950 2.400 5.650 3.200 *7.300 4.650 *10.050 7.350 *6.450 *6.4500.0 m kg *3.350 2.400 5.500 3.050 *8.000 4.400 *11.250 6.900 *7.050 *7.050

-1.5 m kg *4.000 2.650 5.400 3.000 7.800 4.200 *11.400 6.700 *10.350 *10.350-3.0 m kg *5.350 3.150 *7.650 4.200 *10.550 6.700 *15.450 *14.050

Rear outrigger 7.5 m kg *2.800 *2.800 *4.150 4.1006.0 m kg *2.600 2.450 *3.200 2.600 *4.800 4.1504.5 m kg *2.550 2.000 *4.950 2.550 *5.350 4.000 *6.050 *6.0503.0 m kg *2.650 1.750 *5.350 2.450 *6.250 3.700 *7.950 6.050 *12.400 11.9001.5 m kg *2.900 1.700 5.650 2.300 *7.200 3.400 *9.900 5.350 *6.350 *6.3500.0 m kg *3.250 1.700 5.500 2.200 *7.900 3.150 *11.050 4.900 *6.950 *6.950

-1.5 m kg *3.950 1.850 5.450 2.100 *7.950 3.000 *11.200 4.700 *10.200 9.200-3.0 m kg *5.250 2.250 *7.500 3.000 *10.400 4.750 *15.250 9.350

Without stabilizer 7.5 m kg *2.800 2.500 *4.150 3.1006.0 m kg *2.600 1.750 3.100 1.850 *4.800 3.1004.5 m kg 2.450 1.400 3.100 1.850 4.750 3.000 *6.050 5.0503.0 m kg 2.200 1.200 3.000 1.750 4.500 2.750 7.400 4.450 *12.400 8.5001.5 m kg 2.100 1.100 2.850 1.600 4.150 2.450 6.650 3.850 *6.350 *6.3500.0 m kg 2.100 1.100 2.700 1.450 3.900 2.200 6.150 3.400 *6.950 6.200

-1.5 m kg 2.300 1.200 2.600 1.400 3.750 2.050 5.950 3.250 *10.200 6.100-3.0 m kg 2.800 1.500 3.750 2.050 5.950 3.250 *12.250 6.250


Arm length 2.900 mm







A

B

C

Outrigger front + rear 7.5 m kg *2.700 *2.700 *4.500 *4.5006.0 m kg *2.600 *2.600 *3.900 *3.900 *5.400 *5.4004.5 m kg *2.600 *2.600 *5.400 4.150 *6.700 6.2003.0 m kg *2.700 *2.700 5.800 4.050 *7.850 5.950 *10.550 9.750 *16.950 *16.9501.5 m kg *2.950 2.800 5.650 3.900 8.300 5.600 *11.650 9.0500.0 m kg *3.350 2.900 5.550 3.750 8.000 5.300 *11.550 8.600 *6.050 *6.050

-1.5 m kg *4.050 3.150 5.450 3.700 *7.550 5.150 *10.350 8.450 *9.300 *9.300-3.0 m kg *4.000 3.700 *4.000 3.750 *6.050 5.200 *8.200 *8.200 *10.400 *10.400


23


3,0 m

ON

E-P

IEC

E B

OO

M

Arm length

A

B

7,5 m 6,0 m 4,5 m


Arm length 3.500 mm

Front outrigger + rear blade 7.5 m kg *2.700 *2.700 *2.750 *2.7506.0 m kg *2.600 *2.600 *4.200 3.5004.5 m kg *2.600 2.300 *5.050 3.400 *5.500 5.1503.0 m kg *2.700 2.050 5.250 3.250 *7.450 4.850 *9.750 7.9501.5 m kg *2.950 2.000 5.050 3.100 7.450 4.550 *11.250 7.2500.0 m kg *3.300 2.000 4.900 2.950 7.150 4.300 *11.650 6.750 *6.600 *6.600

-1.5 m kg 3.650 2.150 4.800 2.900 6.850 4.000 *10.850 6.500 *8.900 *8.900-3.0 m kg *3.950 2.550 4.800 2.850 *6.650 4.000 *9.100 6.500 *12.400 *12.400

Rear outrigger 7.5 m kg *2.650 2.550 *2.700 2.6006.0 m kg *2.550 2.100 *4.150 2.6504.5 m kg *2.550 1.750 *4.950 2.550 *5.400 3.9503.0 m kg *2.650 1.550 5.750 2.450 *7.300 3.650 *9.600 6.0001.5 m kg *2.850 1.450 5.550 2.250 *8.000 3.350 *11.100 5.3500.0 m kg *3.200 1.450 5.350 2.150 7.950 3.100 *11.450 4.850 *6.500 *6.500

-1.5 m kg *3.800 1.600 5.250 2.050 7.650 2.850 *10.700 4.650 *8.750 *8.750-3.0 m kg *4.900 1.900 *4.750 2.050 *6.550 2.850 *8.950 4.600 *12.200 9.200

Without stabilizer 7.5 m kg *2.650 1.850 *2.700 1.9006.0 m kg 2.400 1.350 3.150 1.9004.5 m kg 2.000 1.100 3.100 1.850 4.700 2.9503.0 m kg 1.800 950 2.950 1.750 4.400 2.700 7.300 4.4501.5 m kg 1.750 900 2.800 1.600 4.100 2.400 6.600 3.8500.0 m kg 1.750 900 2.650 1.450 3.850 2.150 6.100 3.400 *6.500 *6.200

-1.5 m kg 1.900 950 2.550 1.350 3.550 1.950 5.850 3.200 *8.750 6.100-3.0 m kg 2.250 1.150 2.550 1.350 3.350 1.900 5.800 3.200 *12.150 6.200







A

B

C

TW

O-P

IEC

E B

OO

M

Outrigger front + rear 7.5 m kg *2.750 *2.7506.0 m kg *2.600 *2.600 *4.000 *4.000 *4.200 *4.2004.5 m kg *2.600 *2.600 *4.550 4.300 *4.800 *4.8003.0 m kg *2.700 *2.700 *5.050 4.150 *5.750 *5.750 *7.100 *7.100 *10.150 *10.1501.5 m kg *2.900 2.700 *5.600 3.950 *6.850 5.850 *9.200 *92000.0 m kg *3.250 2.700 5.600 3.800 *7.700 5.500 *10.800 8.900 *7.700 *7.700

-1.5 m kg *3.850 2.950 5.500 3.700 8.050 5.300 *11.350 8.550 *9.850 *9.850-3.0 m kg *5.000 3.400 5.500 3.650 *7.850 5.250 *10.950 8.450 *13.900 *13.900

Front outrigger + rear blade 7.5 m kg *2.750 *2.7506.0 m kg *2.600 *2.600 *4.000 3.550 *4.200 *4.2004.5 m kg *2.600 2.450 *4.550 3.500 *4.800 *4.8003.0 m kg *2.700 2.200 *5.050 3.350 *5.750 5.050 *7.100 *7.100 *10.150 *10.1501.5 m kg *2.900 2.100 *5.600 3.200 *6.850 4.700 *9.200 7.5000.0 m kg *3.250 2.150 5.500 3.050 *7.700 4.400 *10.800 6.950 *7.700 *7.700

-1.5 m kg *3.850 2.300 5.350 2.900 7.800 4.200 *11.350 6.650 *9.850 *9.850-3.0 m kg 4.950 2.700 5.350 2.900 7.750 4.150 *10.950 6.550 *13.900 *13.800

Rear outrigger 7.5 m kg *2.750 *2.7506.0 m kg *2.550 2.100 *3.950 2.700 *4.100 *4.1004.5 m kg *2.550 1.750 *4.500 2.600 *4.700 4.1003.0 m kg *2.650 1.550 4.950 2.500 *5.650 3.800 *7.000 6.250 *10.000 *10.0001.5 m kg *2.850 1.450 *5.500 2.300 *6.750 3.450 *9.050 5.4500.0 m kg *3.200 1.450 5.500 2.150 *7.550 3.150 *10.600 4.950 *7.600 *7.600

-1.5 m kg *3.800 1.600 5.400 2.050 7.950 3.000 *11.150 4.700 *9.750 9.100-3.0 m kg *4.900 1.900 5.350 2.050 *7.750 2.950 *10.750 4.600 *13.700 9.150

Without stabilizer 7.5 m kg *2.700 2.0506.0 m kg *2.550 1.500 3.200 1.950 *4.100 3.2004.5 m kg 2.150 1.200 3.150 1.900 *4.700 3.0503.0 m kg 1.950 1.000 3.000 1.750 4.600 2.800 7.000 4.650 *10.000 9.2001.5 m kg 1.850 900 2.850 1.600 4.250 2.500 6.750 3.9000.0 m kg 1.850 900 2.700 1.450 3.900 2.200 6.250 3.500 *7.600 6.300

-1.5 m kg 2.000 1.000 2.550 1.350 3.700 2.000 5.950 3.200 *9.700 6.050-3.0 m kg 2.350 1.250 2.550 1.350 3.650 1.950 5.850 3.160 12.350 6.100


Arm length 3.500 mm







A

B

C

Outrigger front + rear 7.5 m kg *2.700 *2.700 *2.750 *2.7506.0 m kg *2.600 *2.600 *4.200 *4.2004.5 m kg *2.600 *2.600 *5.050 4.200 *5.500 *5.5003.0 m kg *2.700 2.650 5.850 4.050 *7.450 6.000 *9.750 *9.7501.5 m kg *2.950 2.550 5.650 3.900 *8.100 5.650 *11.250 9.2000.0 m kg *3.300 2.550 5.500 3.750 8.050 5.400 *11.650 8.650 *6.600 *6.600

-1.5 m kg *3.950 2.750 5.400 3.650 7.750 5.100 *10.850 8.400 *8.900 *8.900-3.0 m kg *3.950 3.200 *4.800 3.650 *6.650 5.050 *9.100 8.350 *12.400 *12.400

LIFTING CAPACITY

WALK-AROUND

PW200-7 H Y D R A U L I C E X C A V A T O R S

24

WALK-AROUND

STANDARD EQUIPMENT

UESS 009102 5/2004

Komatsu EuropeInternational NVMechelsesteenweg 586B-1800 VILVOORDE (BELGIUM)Tel. +32-2-255 24 11Fax +32-2-252 19 81www: komatsueurope.com

• Komatsu SAA6D102E-2• Turbocharged, direct injection diesel

engine, complies with European stageII emissions.

• Double element type air cleaner withdust indicator and auto dust evacuator,suction type cooling fan.

• Automatic fuel line de-aeration• Engine key stop• Engine overheat prevention system• Engine ignition can be password

secured on request• Alternator 24V 45A• Batteries: 2 x 12V, 95 Ah.• Starting motor 24V 5.5Kw• Electric closed-centre load sensing

(ECLSS) hydraulic system (HydrauMind)• Pump and engine mutual control

(PEMC)• Four sets of tyre and rim (twin tyre)

10.00-20 14PR (2,5m undercarriage)• Multi function monitor with equipment

management monitoring system(EMMS).

• 4 Working mode selection system(active, economy, breaker and liftingmode)

• Power max function• Auto-deceleration function• Automatic engine warm-up system• Adjustable PPC wrist control levers for

arm, boom, bucket and swing• One additional service valve (full flow)• power shift type• Fully automatic 3-speed transmission

driving through front and rear plane-

tary axles.• Orbitrol type hydraulic steering acting

on front wheels• Oscilating front axle (11°) with auto-

matic and manual cylinder locking• Dual circuit hydraulic brakes with out-

board wet multi-disc service brakes • Spring actuated park brake (hydraulic

release) incorporated into transmission• SpaceCab, highly pressurized and

tightly sealed viscous mounted cabwith tinted safety glass windows, withwindow, pull-up type front windowwith locking device, removable lowerwindow, front window wiper with inter-mittent feature, sun blind roller, maga-zine rack behind seat, 12V power sup-ply, cigarette lighter, ashtray; floor mat,

machine cab handrails, suspensionseat with tiltable left hand console,automatic weight adjustment,adjustable arm rests and retractableseat belt, climate control system, hotand cool box

• 2,5m width undercarriage.• Refuelling pump • Boom safety valves• Twin tool boxes• Overload warning device• Operation and maintenance manual• Lockable fuel cap and covers• Toolkit and spare parts for first service

Standard and optional equipment may vary. Consult your Komatsu dealer for more information.

OPTIONAL EQUIPMENT• Lower wiper• 2,75m width undercarriage• Four sets of tyre and rim (twin tyre)

11.00-20 16PR (2,75m undercarriage)• Parallel blade (front and / or rear)• 2 or 4 outriggers • Mono boom and two piece boom

• 1,8m, 2,4m, 2,9 and 3,5m arms• Wide range of Komatsu buckets• Cold weather battery 120 Ah• Additional hydraulic circuits• Mechanical, hydraulic quick coupler• Heated air suspension seat• Radio-cassette

• OPG front guard• Additional RH boom lamp• Rotating beacon preparation• Rain visor ( not for use with OPG)• Engine room lamp• Additional large capacity cab roof lights (3)• Bio-degradable oil

• Adjust cylinder safety valve• Arm cylinder safety valve• Customized paint• Auto greasing system

Prin

ted

in E

urop

e -

Thi

s sp

ecifi

catio

n sh

eet m

ay c

onta

in a

ttach

men

ts a

nd o

ptio

nal e

quip

men

t tha

t are

not

ava

ilabl

e in

you

r ar

ea.

Ple

ase

cons

ult y

our

loca

l Kom

atsu

dis

trib

utor

for

thos

e ite

ms

you

may

req

uire

. Mat

eria

ls a

nd s

peci

ficat

ions

are

sub

ject

to c

hang

e w

ithou

t not

ice.

WHEELED EXCAVATOR

Documents

PW200-7 - Komatsu · 2010-12-08 · net horsepower 118 kw 158 hp / 160ps operating weight 18.920 - 21.870 kg bucket capacity 0,48 m3 - 1,58 m3 pw200-7 pw 200 pw200-7 …