PVC Paste Resin (Homopolymer)

The information given herein and other otherwise supplied to users is based on our general experience and where applicable, on the results of tests on samples of typical manufacture. However, because of the many factors which are outside knowledge and control, which can effect the use of these products, users must rely on their own judgment and we cannot accept liability for any injury, loss or damage resulting from reliance upon such information.

HB-100

General properties HB-100 is a high molecular weight PVC homo polymer produced by suspension process. It has fine particles and shows narrow particle size distribution. It’s mainly used for reducing the gloss and viscosity of paste resin. Plastisol made from this blend resin exhibits the following properties. ▶ Increase of mat effect ▶ Good effect of viscosity reduction ▶ Good effect of viscosity aging variation ▶ Good processibility ▶ Long durability against chemicals ▶ Main application; flooring, wallpaper, cover layers, cast, dipped articles and other

application

Polymer properties

Property Unit Typical Value Test Method

Polymerization degree - - JIS 6721

K-value - - JIS 6721

Apparent density g/cc 0.50±0.10 ASTM D1895

Volatile content % Max. 0.30 ASTM D3030

Particle size (sieve method) % 100 60 mesh pass