Pure IP PBX KX-TDE100/200

MPR 3.00(Edition-1)

Panasonic Communications CO.,LTD.

Support New Hardware

“Support New Hardware - 01

KX-NCP0158 (8ch IP-CS)

KX-TCA175/275 (New DECT Portable Station)

KX-NT400 (New IP PT)

Luxury IP-Extension.IP-Camera integration.Max. 64 on TDE100/200 MPR 3.0

Max. 16

- 5-digit extension numbering- DECT control by CTI- Large Color Back-lit LCD

The same as NCP MPR 2.0

“Support New Hardware - 02

KX-TDE0105 (6M-MEC)

SMDR HotelW/O MEC W/ MEC W/O MEC W/ MEC

TDE100/200 MPR 2.0 200 calls - 4,000 calls -

TDE100/200 MPR 3.0 200 calls 10,000 calls 4,000 calls 4,000 calls

Support New HardwareKX-NCP0158 (8ch IP-CS)on TDE100/200 MPR 3.0

“Hardware (KX-NCP0158: 8ch IP-CS) - 1

IP-Network

Remote office

RoamingSeamless Hand over

- One DSP (DSP-16, -64) card is needed.- No Activation Key requirements.

DSP-16/64

TDE100/200 MPR 3.0

Local office

“

PBX Max. Number of Slot Max. Number of IP-CSTDE100/200 4 16

System Capacity

Max. 4 Slots

Hardware (KX-NCP0158: 8ch IP-CS) - 2

“

One Slot supports 4 x KX-NCP0158.

Room ARoom BRemote-1Remote-2Remote-3Remote-4Remote-5Remote-6Remote-7Remote-8Remote-9Remote-10Remote-11Remote-12Remote-13Remote-14

Max. 16

Hardware (KX-NCP0158: 8ch IP-CS) - 3

“

System Capacity

TDE100 TDE200

System Max. 32 32

TDA0141/TDA0142 32 32TDA0158 (*1) 16 16

IP-CS (*2) 16 16

PS (w/o MEC/ w/ MEC) 128/128 128/128

(*1) One High Density CS counts as 2 x TDA0141/TDA0142.(*2) One IP-CS counts as 2 x TDA0141/TDA0142.

Hardware (KX-NCP0158: 8ch IP-CS) - 4

TDE100/200 MPR 3.0Configuration

“TDE100/200 MPR 3.0 Configuration - 1

Maximum NumberTDE100 TDE200

System Total 14 16Trunk Total 8 8Virtual Total 4 4V-IPGW16 2 2V-SIPGW16 2 2Physical Trunk Total 6 8Extension Total 8 8Virtual Extension Total 4 4V-IPEXT32 4 4V-SIPEXT32 4 4IC-CS4 4 4Physical Extension Total 6 8

Card Installed in free slots or virtual slots

“TDE100/200 MPR 3.0 Configuration - 2

Maximum NumberTDE100 TDE200

Trunk Total 128 128Virtual Total 64 64H.323 Trunks 32 32SIP Trunks 32 32Physical Trunks 120 128Extension Total 256 256IP-Extension Total (*1) 128 128Virtual Extension Total 128 128IP-PT and IP-Softphone 128 128SIP 128 128Physical Extension Total (*2) 160 256

Maximum Trunks and Extensions

*1 Virtual + IP-Ext. Card.*2 Traditional-Ext. Card + IP-Ext. Card

TDE100/200 MPR 3.0 Functions/Features

“TDE100/200 MPR 3.0 Functions/Features - 1

The “KX-TDA/TDE/NCP New Features/Functions Ver.3.PPT” explains detailed information.

Enhanced SD or Enhanced Key Note

Conference feature improvement No MEC is not needed.

Enhanced Common Extension Feature(Common extension numbering for 2 or more PBXs)

Yes

CLIP of extension which set Fwd can be informed to ISDN by option. No

Improved ARS function. (Dial 011 and 01 is supported) No

128 IP-PT by MPR card is supported. No

Display power unit type. No Sales company mode

FAX auto transfer via ESVM NoMax. IP trunk simultaneous call (SIP-Trunk + H.323 G/W) 32 64 ➔ No Sales company

mode

“

Softphone trial mode is supported.- Softphone can be used in trial mode when a user logs-in with CA Pro trial mode.Default data : - Built in CA: “Enable”

The TDE100/200 MPR 3.0 supports CA (Build in/Server), CA-Operator Console and CA Network.A client PC needs PCC recommendation spec.

Number of contacts in contact list

MemoryCPU

Build in Server32 1024 512M 1.0 GHz Intel® Pentium®/Celeron®

processor or comparable CPU128 1024 1GB 2.0 GHz Intel® Pentium®/Celeron®

processor or comparable CPU256 1024 1GB 2.6 GHz Intel® Pentium®/Celeron®

processor or comparable CPU1024 1024 1GB 2.6 GHz Intel Core™2 Duo processor or

comparable CPU

TDE100/200 MPR 3.0 build-in CA supports Max.128 CA Clients.

TDE100/200 MPR 3.0 Functions/Features - 2

“

The “KX-TDA/TDE/NCP New Features/Functions Ver.2.PPT” explains detailed information.

Enhanced SD or Enhanced Key Note

Screened call transfer by cellular telephone. YesCO-to-CO call with Ext. CLIP. YesMOH from DISA Message.

No(B-SVM cannot be used for music source of BGM)5-Digits DECT Extension Numbering. NoDECT Control by CTI (TAPI). No

Different Ring Tone for ICD-G call No Optional setting is needed.

HGT100 (Ver.2.0) SIP-SLT Enhancement NoCSTA “Button Press” works without “Enhanced Feature”. No

IP-PT easy installation (registration) No

Hold Tone to IP-PT No Minor Improvement

TDE100/200 MPR 3.0 Functions/Features - 3

“

The “KX-TDA/TDE/NCP New Features/Functions. PPT” explains detailed information.

Enhanced SD or Enhanced Key Note

DSS BLF for Mobile Extension Yes

Transfer re-call to VM-Group. No

Intercept for Call-FWD to CO. No

Busy-out Auto recovery function. No

Two CLIP on an Extension. No

Check-OUT not ready mode. No

System error activates an external relay. No

TDE100/200 MPR 3.0 Functions/Features - 4

“

Minor modification Enhanced SD or Enhanced Key Note

Official support for KX-DT3xx No

American PRI caller ID support. No

Canadian PRI caller name support NoSoftphone trial mode is supported.- Softphone can be used in trial mode when a user logs-in with CA Pro trial mode.

No

Max. Number of A/K files 40 100➔ No

TDE100/200 MPR 3.0 Functions/Features - 5

“TDE100/200 MPR 3.0 Functions/Features - 6

The present TDE100/200 CPU card does not have high quality message IC (for B-SVM), therefore the transfer Wav File to Build-in-SVM function is not supported on TDE100/200 MPR 3.0. PCC has a plan to modify the present TDE100/200 CPU card (Old Card) to the new CPU card to have high quality message IC. The new TDE100/200 CPU card with MPR 3.0 will support the Transfer Wav File to Build-in-SVM function.

Transfer Wav File to Build-in-SVM:

How to recognize the new card and the old card

PCMC for TDE100/200 MPR 3.0

“PCMC for TDE100/200 MPR 3.0Please use U-PCMC Ver. 5.1

Thank You Very MuchFor Your Attention