Puncto 4203

Finishes Shade Cable + ceiling cup Natural birch White White laminated White Black laminated Black Walnut veneer White

Material Form pressed birch slats

Sizes Height 40 cm Diameter Ø 45 cm Weight 1,5 kg Package 46 × 49 × 49 cm, 3,0 kg

Light source E27, LED max. 20 W, incl. Check the website for more details. Please leave 15 mm around the bulb for air circulation. The use of special bulbs such as halogen, mirror or 12 V bulbs in Secto Design lamps is forbidden, due to overheating.

Cable 150 cm, textile cable, ceiling plug/connector + ceiling cup

IP Rating IP20

Maintenance Wipe dust regularly. To remove fresh stains wipe with a slightly moist cloth.

Kauniainen, Finland | +358 9 505 0598 | info@sectodesign.fi | www.sectodesign.fi

January 2016

Kauniainen, Finland | +358 9 505 0598 | info@sectodesign.fi | www.sectodesign.fi

Standard cable set

Weight 192 g (incl. all parts)Cable length 150 cm (longer cables available upon request at additional cost)Colour White or black matt soft lacquer depending on the colour of the pendantLamp base E27Wattage LED max 20 W

Information The standard cable set includes the lamp base, a textile cable, a ceiling cup, a suspension screw and an additional ring. A ceiling plug (pictured) is included in the deliveries to Finland and Sweden; deliveries to other countries include a terminal block (not pictured).

The standard cable set comes with the models Secto 4200, Secto 4201, Magnum 4202 (including extra steel wires), Puncto 4203, Octo 4240, Victo 4250 and Kontro 6000.

Pleasechecktheseparateceilingcupinstructionleafletformoredetailsandinstallationinstructions.

January 2016

Kauniainen, Finland | +358 9 505 0598 | info@sectodesign.fi | www.sectodesign.fi

Standard ceiling cup

Height 11,2 cm / 12 cm (with ring)Outer upper Ø 12,2 cm / 13,1 cm (with ring)Inner upper Ø 11,8 cm / 12,2 cm (with ring)Weight 58 g / 74 g (with ring)Colour White or black matt soft lacquer depending on the colour of the pendant

Information The standard ceiling cup includes an additional ring, which enables leading the cable along the ceiling into the ceiling cup. The additional ring can also be used to cover a larger ceiling socket.

Any extra length of the cable can be swirled into the ceiling cup when altering the hanging height of the pendant.

The standard ceiling cup is a part of the cable set which includes also the lamp base, a textile cable, a suspension screw and a ceiling plug or terminal block.

The standard ceiling cup is used with the models Secto 4200, Secto 4201, Magnum 4202, Puncto 4203, Octo 4240, Victo 4250, Petite 4600 and Kontro 6000.

Pleasechecktheseparateceilingcupinstructionleafletformoredetailsandinstallationinstructions.

Ceiling cup by DezallFinish: White or black matt soft lacquerHeight: 112mm (120 with the additional ring) Upper diameter: 118mm inner / 122mm outer (122/131 with ring)Recommended length of ceiling hook: 15-46mm (20-54 with ring)

Textile cable: White or black – standard length 1.5m (other lengths available) – unearthed – E27 – 230V – Max 42W

Dezall-kattokuppiVäri: Valkoinen tai musta, mattapintaKorkeus: 112 mm (120 renkaan kanssa)Ylähalkaisija: 118 mm sisäpuoli, 122 mm ulkopuoli (122/131 renkaan kanssa)Kattokoukun suosituspituus: 15-46 mm (20-54 renkaan kanssa)

Tekstiilijohto: Valkoinen tai musta – standardimitta 1.5 m – maadoittamaton – E27 – 230 V – Max 42 W

Handmade birch pendant by Secto DesignDesign: Seppo Koho

Käsintehty Secto Design -koivuvalaisin. Suunnittelija: Seppo Koho

This Secto Design pendant uses the patented ceiling suspension by Dezall.

Easy and quick to install, enables the ceiling cup to sit perfectly tight against the ceiling.

Tässä Secto Design-valaisimessa käytetään Dezallin patentoimaa ripustusmenetelmää.

Helppo ja nopea kiinnittää, mahdollistaa kattokupin asettumisen tiukasti kattoon.

Tigh

t fit g

uara

ntee

d

Fasten the cable into the screw at the desired hanging height. Start with the lower side hole, push it into the channel and finish with the upper side hole.

Hang on the ceiling hook and connect.

Screw.Fasten.

Arrange the spare cable and screw the ceiling cup on the screw until the cup sits tightly against the ceiling.

If the power cable comes from the side, use the ring provided and push off one of the side outlets to make room for the cable.

Installation

Kiinnitä johto ruuviin haluamallesi riippumiskorkeudelle aloittaen alemmasta sivureiästä, asettaen johto sen jäl-keen ruuvin sisään ja lopuksi vielä ylempään sivureikään. Ripusta kattokoukkuun ja kytke.

Kiedo ylimääräinen johto kerälle ja kierrä sen jälkeen kattokuppi kiinni ruuviin, kunnes kuppi on tiukasti kiinni katossa. Jos sähkö vedetään pintavetona sivusta, irrota yksi renkaan ulostuloista johtoa varten.

Kiinnitysohje

Kierrä.Kiinnitä.

1.

3.

2.

Finished.Valmis.

For more details visit sectodesign.fi/productsLisätietoja osoitteesta sectodesign.fi/products sectodesign.fi

This luminaire is compatible with bulbs of the energy classes:

This luminaire is sold with a bulb of the energy class:

A++

A+

A B C D E

874/2012

Secto Design Oy: Puncto 4203