Embed Size (px)
Citation preview
N N O V A T I O N
E F F I C I E N C Y
Q U A L I T Y
VerticalVerticalSump PumpsSump Pumps
11
SUMP PUMPSUMP PUMP
Ruhrpumpen is an innovative and efficient centrifugal pump technology company and offers operators of Pump Systems, a wide range of quality products. Ruhrpumpen is committed to global excellence with a complete range of Pumps, Fire Pump packages and related products, such as Decoking Systems and Tools to support the core markets, namely Oil & Gas, Petrochemical, Power, Heavy Industry applications, Mining and Water services. The broad product line complies with the most demanding quality specifications and go beyond stringent industry standards such as API, ANSI, Hydraulic Institute, Underwriter’s Laboraties, Factory Mutual and ISO 9001.
Sump pumps are vertically suspended single casing pumps with separated discharge, semi open or enclosed impeller designed for wet pit applications. They are designed to provide dependable, economical drainage service on medium capacity installations in commercial buildings and general industrial applications. Sump pumps can be built according API 610 latest edition, code VS4.
Ruhrpumpen manufactures sump pumps for clean water applications (model VSP) sump pumps for water with solids (model VSP Non-Clog) and sump pumps for chemicals and petrochemicals (model VSP Chem)
Sump PumpsSump Pumps
VSP
For more than 60 years the name Ruhrpumpen has been synonymous worldwideFor more than 60 years the name Ruhrpumpen has been synonymous worldwidewith innovation and reliability for pumping technologywith innovation and reliability for pumping technology
22
SUMP PUMP SUMP PUMPSUMP PUMPVSP and VSP NON-CLOGVSP and VSP NON-CLOG
The VSP is a sump pump with a semi open impeller, designed for clean water, and the VSP Non-Clog is a solids handling sump pump with an enclosed impeller, designed to handle water with solids as big as 4’’ of diameter. Standard construction for both types of pumps is Cast Iron, however API 610 latest edition construction is available upon request.
Ruhrpumpen has 28 different sizes of Clean Water Sump Pumps, and 18 sizes of Solid Handling Sump Pumps, but with the engineering experience from Ruhrpumpen, any other size and material can be manufactured according to your necessities.
Sump Pumps for Clean Water and Water with SolidsSump Pumps for Clean Water and Water with Solids
BROAD APPLICATION RANGEBROAD APPLICATION RANGE
- Sump drainage
- Flood control
- Air wash systems
- Power plants
- Industrial processes
- Condensation control
- Pollution control
- Dewatering service
- Process plants
- Utility service
TO
TA
L H
EAD
FLOW
40 60 80 100 150 200 300 400 600 800 1000 1500 2000 3000 4000
33 50 67 83 125 167 250 333 500 667 833 1250 1667 2500 3333
10 15 20 30 40 60 80 100 150 200 300 400 600 800
8 13 17 25 33 50 67 83 125 167 250 333 500 667
208
174
139
104
69
56
42
28
21
14
10
7
300
250
200
150
100
80
60
40
30
20
15
53
42
28
21
14
10
7
6
4
3
2
1
63
76
60
40
30
20
15
10
8
6
4
3
2
91
10
gpm
gpm
m m
m³/h
m³/hft ft
33
SUMP PUMPSUMP PUMPVSP and VSP NON-CLOGVSP and VSP NON-CLOG
DESCRIPTION AND STANDARD MATERIALS DESCRIPTION AND STANDARD MATERIALS
Sump Pumps for Clean Water and Water with SolidsSump Pumps for Clean Water and Water with Solids
- Single stage centrifugal sump pump
- Volute type case
- Cast iron motor support
- Flexible shaft coupling
- Steel cover plate
- Up to 20 ft sump depth
- 416SS Shaft
- Cast iron casing
- Cast iron Impeller, semi-open for VSP and enclosed for VSP NON-CLOG
- Steel basket strainer
- Grease lubricated line bearings with bronze bushing as standard
- These pumps require horizontal motor flange “C” to work in vertical position
PERFORMANCE DATA VSP PERFORMANCE DATA VSP
Capacity to 1,200 m³/h (5,285 gpm)Head to 100 m (328 ft)Temperature 0 °C to 205 °C (32 °F to 400 °F)Pressure 40 bar (to 580 psi)Sump depth to 6.1 m (20 ft)
PERFORMANCE DATA VSP NON-CLOG PERFORMANCE DATA VSP NON-CLOG
Capacity to 1,040 m³/h (4,580 gpm)Head to 100 m (328 ft)Solids to 10.16 cm (4 in)Temperature 0 °C to 205 °C (32 °F to 400 °F)Pressure 40 bar (to 580 psi)Sump depth to 6.1 m (20 ft)
* The performance is not limited. For pump operations outside this range, please contact a Ruhrpumpen Representative.
44
SUMP PUMP SUMP PUMPSUMP PUMPVSP and VSP NON-CLOGVSP and VSP NON-CLOGVSP and VSP NON-CLOG
Cross Sectional Drawing VSPCross Sectional Drawing VSPoss Sectional Drawing VSPCross Sectional Drawing VSPCross Sectional Drawing VSP
1 1 Cast Iron frame motor support
2 2 Pipe nut
3 3 Flexible shaft coupling
4 4 Grease fitting
5 5 Discharge flange
6 6 Thrust ball bearing, grease lubricated
7 7 Standard mounting base or customized base available to meet specific customer requirements
8 8 416SS Shaft.
9 9 Lubrication tube
10 10 Carbon steel column
11 11 Grease lubricated bearing; product or external source lubrication also available
12 12 Discharge pipe
13 13 Cast iron casing
14 14 Bearing housing with bronze bearings
15 15 Cast iron semi-open impeller; other materials available
16 16 Steel basket strainer
1
5
2
3
4
6
1313
1616
1212
9
7
1010
8
VSP NON-CLOGVSP NON-CLOGVSP NON-CLOG
1111
1414
1515
For solid handling processes, the VSP non-For solid handling processes, the VSP non-clog is available with an enclosed, accurately clog is available with an enclosed, accurately balanced, keyed impeller which is securely balanced, keyed impeller which is securely locked to the shaft for a smooth operation.locked to the shaft for a smooth operation.As a standard the As a standard the impeller comes in impeller comes in cast iron but other cast iron but other materials are also materials are also available.available.
55
SUMP PUMPSUMP PUMPVSP CHEMVSP CHEM
The VSP Chem is a chemical sump pump with a semi open impeller, designed for corrosive wet pit applications. This heavy duty pump can also be constructed with an API design upon request.
Some examples of fluids that the Ruhrpumpen Chemical Sump Pumps can handle are:
Chemical Sump PumpsChemical Sump Pumps
- Petrochemicals
- Hydrocarbons
- Alkaline substances
- Acid substances
- Chemicals such as molten sulphur
- Slurries
- Polymers
- Solvents
- Volatile organic chemicals
Our products are not limited to these fluids, for more information contact your Ruhrpumpen Representative
Ruhrpumpen manufactures a total of 19 standard sizes of the Chemical Sump Pump, but with our engineering experience; any other size and material can be manufactured according to your requirements.
BROAD APPLICATION RANGE BROAD APPLICATION RANGE
The Ruhrpumpen VSP-Chem is designed for a wide range of applications, such as:
- Wet pit
- Water treatment
- Effluent
- Hydrocarbon processing
- General industry
- Automotive
- Solvents
- Polymers
- Plating and electroplating
- Pharmaceuticals
- Chemical / Petrochemical industry
PERFORMANCE DATA PERFORMANCE DATA
Capacity to 2,317 m³/h (10,200 gpm)Head to 160 m (525 ft)Temperature 0 °C to 205 °C (32 °F to 400 °F)Pressure 40 bar (to 580 psi)Sump depth to 6.1 m (20 ft)
* The performance is not limited. For pump operations outside this range, please contact a Ruhrpumpen Representative.
66
SUMP PUMPSUMP PUMPVSP NON-CLOGVSP NON-CLOG
SUMP PUMPVSP CHEM
Selection ChartSelection Chart
DESCRIPTION AND STANDARD MATERIALS DESCRIPTION AND STANDARD MATERIALS
- Single stage vertical centrifugal pump
- Cast iron or cast steel motor support assembly
- Cast iron or cast steel bearing housing
- Flexible shaft coupling
- Steel cover plate
- 316SS or Alloy 20 column and discharge pipe
- Line shaft (316SS or Alloy 20)
- 316SS or Alloy 20 casing
- 316SS or Alloy 20 balanced, low NPSH semi-open impeller
- Most API materials available
- Bearing housing with bronze guide bushings (other materials available)
- External lubrication line bearings. Other lubrication also available
- Standard double row bearing arrangement
- Steam jacket available
- Fully compliant with API 610 latest edition, but also available as non-API pump
- Dry mechanical seals, double mechanical seals
- Labyrinth oil seal at bearing housing
- Oil lubrication or grease
SUMP PUMPSUMP PUMPVSP CHEMVSP CHEM
77
SUMP PUMPSUMP PUMPVSP CHEMVSP CHEM
Cross Sectional Drawing VSP CHEMCross Sectional Drawing VSP CHEMCross Sectional Drawing VSP CHEMCross Sectional Drawing VSP CHEMCross Sectional Drawing VSP C
1 1 Discharge flange (as 300#)
2 2 Flexible shaft coupling
3 3 Frame support motor
4 4 Mechanical seal
5 5 Standard sole plate (ANSI flanged type) or customized base available to meet specific customer requirements
6 6 Oiler
7 7 Breather
8 8 Standard double row bearing arrangement
9 9 Column with materials according to the latest API - 610 version
10 10 Bearing housing with guide bearings
11 11 Line bearings lubricated by pumped product. Grease or clean fluid from external source lubrication is also available.
12 12 Line shaft with materials according to the latest version of API - 610
13 13 Lubrication tube
14 14 Expansion joint (optional)
15 15 Discharge pipe
16 16 Casing with materials according to the latest version of API - 610
17 17 Semi-open impeller with materials according to the latest version of API - 610
18 18 Steel basket strainer
1
5
1414
1818
1515
1717
1313
1212
1010
8
9
4
1111
1616
2
3
7
6
88
SUMP PUMP SUMP PUMPSUMP PUMPVSP CHEM
Optional Features Optional FeaturesOptional Features
Ruhrpumpen offers you a wide range of features to meet your specific requirements. Please contact us to help you choose the best feature for your pump application.
STEAM JACKET STEAM JACKET
COLUMN BEARINGSCOLUMN BEARINGS
Some fluids, such as molten sulphur, need to maintain a certain temperature in the pump and this is possible with the help of a steam jacket. The steam flows through the whole pump heating the fluid avoiding crystallization or any change in the operational conditions.
- Pressure of jacket: Up to 14 bar (200 psi)
- Materials: Available in all principal alloys according to API
- Vapor-proof construction
- Self-lubricating system inside the jacket to avoid solidification of the fluid in the bearings (in case the pump stops).
Specific applications require specific characteristics and Ruhrpumpen offers a range of column bearings. Optional fluted rubber with rigid shell, bronze, carbon and other special alloys are available. Petro-coke cartridge is also available.
99
SUMP PUMPSUMP PUMP
GUIDE BEARING DESIGNSGUIDE BEARING DESIGNS
Ruhrpumpen can provide customers with a complete line of level measuring instruments, controls and starters for each Sump Pump to suit specific requirements.
- Multi-point level switch
- Liquid level electric switch for tanks
- Floating controls
- Magnetic float switches
- Vibrating level switches
Other options:
LEVEL MEASURING INSTRUMENTS AND CONTROLSLEVEL MEASURING INSTRUMENTS AND CONTROLS
For example:
Ultrasonic level transmitter designed for reliable continuous level measurement.
1010
SUMP PUMP SUMP PUMPSUMP PUMP
Condensate, Power Plants, Municipal, Condensate, Power Plants, Municipal, Hydrocarbons, Pipeline and Hydrocarbons, Pipeline and RefineriesRefineries.
Low NPSH “Shockless Entry” first stage impeller (single or double suction), Single or multi-stage. Heavy duty process design according to API 610 latest edition (VS6).
Vertical Barrel PumpVertical Barrel Pump
Other Ruhrpumpen ProductsOther Ruhrpumpen Products
ANSI HorizontalANSI HorizontalProcess PumpProcess Pump
Single stage, radially split casing with flanged connections, enclosed impeller, foot mounted.Petrochemical, Oil & Gas, Steel Petrochemical, Oil & Gas, Steel Industry, Automotive, Power Industry, Automotive, Power Generation, Water Treatment, Generation, Water Treatment, Pharmaceutical and General Process.Pharmaceutical and General Process.
Dewatering, Water, Mining, Oil Dewatering, Water, Mining, Oil Process, Pipeline, Power Generation, Process, Pipeline, Power Generation, Fire Service and General Process .Fire Service and General Process .
Single stage, horizontally split casing, double volute with flanged connections, enclosed impeller, horizontal or vertical mounting.
Horizontal Split CaseHorizontal Split CasePumpPump
Commercial Centers, High Rise Commercial Centers, High Rise Buildings, Onshore/Offshore Buildings, Onshore/Offshore Platforms, Power Stations and Platforms, Power Stations and Chemical Industriess.Chemical Industriess.
Horizontal split case, listed by Underwriters Laboratories Inc. and approved by Factory Mutual.
Fire PumpFire Pump
Represented by:
October.12
RP
-BR
-SU
M-E
N-V
01
-12
10
25
