Pumps forOriginal Equipment Manufacturers

Pumps for Original Equipment Manufacturers

High-speed pumpassembly lines aredesigned to assemblelarge volumes ofpumps with very shortlead times.

Rough castings are stored andready for machining andassembly into finished products.

State-of-the-art, fullyautomated machining centers

provide high-speed, high-quality machining of pump

castings.

Superior products require state-of-

the-art facilities, and Gorman-Rupp

manufacturing facilities are

among the most efficient

and modern facilities in the

world. m We constantly

update our plants and employ the

latest technology to ensure that our

products will be the most reliable

in the industry. m Our commitment

to engineering and manufacturing

superiority is the same as it was in

1933. We realize that modern, effi-

cient and state-of-the-art facilities

are necessary for providing superior

pumping products and solutions.

State-of-the-art facilities.

GORMAN-RUPP meets the needs of the originalequipment manufacturer by designing and building

a full line of custom pumps and pumping systems for specific applications in all industries.

When you specify Gorman-Rupp, you benefit fromknowledgeable engineers and assistance, world-

wide service centers, and over 3,500 pumps to choosefrom. This is all backed by a one-year warranty.

Whether the demand is for new pump design oradapting an existing pump to meet precise

requirements, our experienced personnel are up tothe challenge.

Gorman-Rupp has been manufacturing pumping systems and providing superior fluids handling

solutions since 1933.

Many of the innovations introduced byGorman-Rupp have become industry standards.

We have one of the largest selections of pumps inthe world. Pump models include self-priming centrifugal, standard centrifugal, submersible,rotary gear and diaphragm pumps.

We have four manufacturing plants with over onemillion square feet of floor space and five distribu-tion centers throughout the world.

As we continue to provide pumping systems and fluid handling solutions to customers around theglobe, we never lose sight of the original philosophy that started our company in 1933. We still believe in innovation, improvement andsuperior products.

Meeting the needs of the original equipment manufacturer.

GORMAN–RUPP PUMPS

handle everything from

solids and corrosives to

petroleum products and

clear liquids. You’ll find

them operating reliably in

steels mills, paper mills,

sewage treatment plants,

fish meal plants, wineries,

tanneries, petroleum bulk plants,

automotive appliance factories, laun-

dry facilities and thousands of other

applications. When there is a fluid

to move, Gorman–Rupp can handle

it. m Gorman–Rupp pumps can

handle almost any fluid from OEMs

including sludge, slurry, brackish

or viscous fluid, dirty water, aircraft

fuels, gasoline, fuel oils, solvents,

and petrochemicals. Our self-priming

centrifugal, straight centrifugal, sub-

mersible, diaphragm, rotary

gear pumps and oil recovery

pumps are ideal for OEMs of

bulk plants, tank farms, barges,

tankcars and trucks. m Gorman-

Rupp pumps are also great

for OEMs in need of high per-

formance, energy-efficient irri-

gation pumps, versatile power

take off pumps, high pres-

sure pumps, rotary gear pumps

and self-priming pumps for

liquid manure handling, fertilizer

transfer and general dewatering

use. m Our simple pump design

with few moving parts minimizes the

need for repair or service, and rou-

tine field maintenance can be com-

pleted with com-

mon hand tools.

A U.S. Military transfer system uses aGorman-Rupp O Series® pump to transfer

liquids to vehicles in the field.

10 Series® pumps are used to transfer 110° wastewater from

washing machines to the filtration system and heat

exchanger at a commerciallaundromat in Ohio, USA.

10 Series® pumps are used to backwash the filtration

system at a water reclamationfacility in Florida, USA.

O Series® high-pressure, self-priming centrifugal pump ismounted on a fire truck for direct pumping from the tank to the fire in Ohio, USA.

60 Series® high-pressure, self-priming centrifugal pump is used in a street cleaning truck.

T Series™ pumpstransfer coolantfrom the sump to filter and back to CNC machinesat an automotivemanufacturingplant inMichigan, USA.

Pumps from Gorman-Rupp servea variety of OEM markets, worldwide.

vmmmmmmmmmmmmmmmmmmmmmmmvSelf–priming Centrifugal

Gorman-Rupp self-priming centrifugal pumps are easy to install and easy to service. Because they’reself-priming, they can be mounted high and dry at floor level, with only the suction line down in theliquid. If service or maintenance is required it can be completed quickly and easily. There is no need to pull the pump. There are no long drive shafts to install and align. No hoists or cranes are required.And, there is never any need for service personnel to enter the sump. Pumps are available as basicunits for connection to your power source or may be flex-coupled, V-belt driven or engine mounted.

vmmmmmmmmmmmmmmvSuper T Series™

Size: 3", 4", 6" (75 mm, 100 mm, 150 mm)Max. Capacity: 1500 GPM (94.6 lps)

Max. Head: 108 feet (32.9 m)Max. Solids: 3" (76.2 mm)

vmmmmmmmvT Series

Size: 2", 3", 4", 6", 8", 10"(50 mm, 75 mm, 100 mm, 150 mm, 200 mm, 250 mm)

Max. Capacity: 3400 GPM (214.5 lps)Max. Head: 130 feet (39.6 m)

Max. Solids: 3" (76.2 mm)

vmmmmmmmvU Series®

Size: 3", 4", 6" (75 mm,100 mm,150 mm)


Max. Solids: 1 1⁄4" (31.8 mm)

vmmmmmmmmv10 Series®

Size: 1 1⁄2", 2", 3", 4", 6" (38 mm,50 mm, 75 mm, 100 mm, 150 mm)




Size: 2", 3" (50 mm, 75 mm)Max. Capacity: 318 GPM (20.1 lps)

Max. Head: 184 feet (56.1 m)Max. Solids: 1⁄2" (12.7 mm)


Size: 1 1⁄4", 1 1⁄2", 2", 3", 4", 6", 8", 10"(32mm, 38mm, 50mm, 75mm,100 mm, 150 mm, 200 mm, 250 mm)


Max. Solids: 2 3⁄8" (60.3 mm)

vmmmmmmmvO Series®

Size: 2", 3", 4", 6" (50 mm, 75 mm, 100 mm, 150 mm)


Max. Solids: 5⁄8" (15.9 mm)

vmmmmmmmmmmmmmmmmmmmmmmv80 Series® Close Coupled

Size: 3⁄4", 1 1⁄4", 1 1⁄2" (19 mm, 32mm,38 mm)


Max. Solids: 1⁄2" (12.7 mm)

vmmmmmmmmmmmmmmmmmmmmmmv10 Series® Close Coupled

Size: 1 1⁄2", 3", 4" (38 mm,75 mm, 100 mm)



3"-90° Rotary-Gear pumps are used to offload and loadchemicals to or from tanker

trucks and rail cars at achemical processing plant

in Iowa, USA.

10 Series® pump is used to transfer wastewater from a washing machine to the lint extractor at acommercial laundromat in Michigan, USA.

T Series™ pumps are used forrecirculation in the holding tank

and to transfer clean coolantfrom the holding tank to

CNC machines at an automotivemanufacturing plant in

Michigan, USA.

vmmmmmmmmmmvDiaphragm

Gorman-Rupp diaphragm pumps are designedfor pumping sludges, slurries and sand-ladenwater. Pumps are lightweight, portable, and willautomatically reprime at 15-foot suction lift.They can run dry without damage, and are avail-able engine driven, motor driven or for use withcustomer supplied power.

vmmmmmmmmmmmvSubmersible

Gorman-Rupp submersibles overcome the con-ventional limitation of 24-foot suction lift, mak-ing them ideal for high head, high volume appli-cations. Widebase models are designed foropen pits and quarries. Slimline models areideal for drilled wells and narrow openings.

vmmmmmmmmmmmmmmmmmmmmmvWidebase Submersibles

Size: 2" to 12" (50 mm to 304.8 mm)Max. Capacity: 7400 GPM (466.9 lps)


Horsepower: 2 to 275 HP

vmmmmmmmmvDiaphragm

Size: 2", 3", 4" (50 mm, 75 mm,100 mm)


Max. Solids: 2 1⁄4" (57.2 mm)

vmmmmmmmmmmmmmmmmmmmvSlimline Submersibles

Size: 1 1⁄2" to 6" (38 mm to 150 mm)Max. Capacity: 2100 GPM (132.5 lps)

Max. Head: 380 feet (115.8 m)Max. Solids: 1⁄2" (12.7 mm)

Horsepower: 1 to 60 HP

vmmmmmmmmmmmmmmmmmmvAir Driven Diaphragm

Size: 1 1⁄2" to 6" (38 mm to 150 mm)Max. Capacity: 350 GPM (22.1 lps)

Max. Head: 220 feet (67.1 m)Max. Solids: 4" (100 mm)

vmmmmmmmmmmmmmmmmmmmmmvAir Driven Diaphragm

Air driven diaphragm pumps are designed forpumping heavy-duty sludges and slurries. They are capable of operating dry, on suctionlifts up to 10 feet, and handling high solidscontent (up to 70%). Lined units are availablefor highly abrasive ⁄ corrosive applications.

vmmmmmmmvJ Series®

Size: 3" to 20" (75 mm to 508 mm)Max. Capacity: 15,000 GPM (946.4 lps)

Max. Head: 260 feet (79.2 m)Max. Solids: 4 1⁄2" (114.3 mm)

Horsepower: 2.7 to 215 HP

vmmmmmmmmmmmmmvPower Take Off

Size: 2", 3" (50 mm, 75 mm)Max. Capacity: 350 GPM (22.1 lps)

Max. Head: 450 feet (137.2 m)

vmmmmmmmmmmmmmmvPower Take Off

Self-priming centrifugal refueler pumps are ideal for handling aircraft fuels, fuel oil, gasolineand other petroleum derivatives. These pumpshave no check valves which provide better suctionperformance when handling solvents, petroleumproducts and similar liquids.

vmmmmmmmmmmmmmmmmmmmmmvStandard Centrifugal

Gorman-Rupp manufactures hundreds of models of high volume, high pressure centrifugal pumps. These high efficiency pumps have few moving parts, so maintenance and service are minimal.


Size: 3" to 5" (75 mm to 125 mm)Max. Capacity: 1200 GPM (75.7 lps)



Size: 3" to 12" (75 mm to 300 mm)Max. Capacity: 6800 GPM (429 lps)


vmmmmmmmmmmmmmmmmmmmmmvVG Series™ & VGH Series

Size: 3" to 12" (75 mm to 300 mm)Max. Capacity: 6900 GPM (435.3 lps)


vmmmmmmmmvSplit Case

Size: 1 1⁄2" × 1" to 6" × 4" (38 mm × 25 mm to 150 mm × 100 mm)


A 3"-180°flanged RotaryGear pump transferschemicals to a holding tank for mixing at a chemicalprocessing plant

80 Series® pump is used in a

reclaim system to transfer

wastewater fromexterior pits to the filter tanks

at an automatic car wash in

Ohio, USA.

vmmmmmmmmmmmmmvEngine Driven

Gorman-Rupp portable, engine-driven, self-primingcentrifugal pumps are ideal for standby and emer-gency cleanup applications. Pumps can handle upto 3"diameter solids, depending on model. Pumps tosuit other applications are also available. Optionalwheel kit provides portability for easy access to thejob site. Available with gasoline or diesel engines.

vmmmmmmmmmmmvRotary Gear

Positive displacement rotary gear pumps are versatile enough to handle a wide variety of pumpingapplications, liquids, viscosities and temperatures. They are available in a variety of drive arrange-ments, including close-coupled, flex-coupled, gear reducer and V-belt drive.

vmmmmmmmmmmvGMS Series

Medium Duty Rotary Gear

Size: 1" to 6" (25 mm to 150 mm)Max. Capacity: 450 GPM (28.4 lps)Max. Pressure: 200 psi (14 bar)Max. Viscosity: 250,000 ssu (55,000 cst)

Max. Temperature: –75° to 350° FMaterial of Construction: Ductile Iron

vmmmmmmmmmmvGHS Series

Heavy Duty Rotary Gear

Size: 1" to 6" (25 mm to 150 mm)Max. Capacity: 600 GPM (37.9 lps)Max. Pressure: 400 psi (28 bar)Max. Viscosity: 2,000,000 ssu (440,000 cst)

Max. Temperature: –75° to 675° FMaterial of Construction: Ductile Iron, Steel,

Stainless Steel

vmmmmmmmmvHO Series

Size: 3⁄4" (19 mm)Max. Capacity: 6 GPM (.4 lps)Max. Pressure: 50 psi (3.5 bar)Max. Viscosity: 2,500 ssu (540 cst)

Max. Temperature: 0° to 120° FMaterial of Construction: Cast Iron

vmmmmmmmmmmvGHA Series

Extreme Duty Rotary Gear

Size: 1 1⁄2" to 4" (38 mm to 100 mm)Max. Capacity: 146 GPM (9.2 lps)Max. Pressure: 200 psi (14 bar)Max. Viscosity: 250,000 ssu (55,000 cst)

Max. Temperature: –60° to 500° FMaterial of Construction: Cast Iron

vmmmmmmmmmmvGMC Series

Medium Duty Compact Rotary Gear

Size: 1" to 2" (25 mm to 50 mm)Max. Capacity: 38 GPM (2.4 lps)Max. Pressure: 200 psi (14 bar)Max. Viscosity: 250,000 ssu (55,000 cst)

Max. Temperature: –50° to 400° FMaterial of Construction: Ductile Iron

vmmmmmmmmmmvGHC Series

Heavy Duty Compact Rotary Gear

Size: 1" to 3" (25 mm to 75 mm)Max. Capacity: 295 GPM (18.6 lps)Max. Pressure: 400 psi (28 bar)Max. Viscosity: 2,000,000 ssu (440,000 cst)

Max. Temperature: –50° to 400° FMaterial of Construction: Ductile Iron, Steel,

Stainless Steel

vmmmmmmmmmmmmvPrime Aire ®

Size: 4", 6", 10", 12" (100 mm, 150 mm,250 mm, 305 mm)

Max. Capacity: 6200 GPM (391.2 lps)Max. Head: 420 feet (128 m)


vmmmmmmmmmmmmvEngine Driven

Size: 3", 4", 6", 8", 10", 12" (75 mm,100 mm, 150 mm, 200 mm,250 mm, 305 mm)



vmmmmmmmmmmmmvEngine Driven

Size: 1 1⁄2", 2", 3", 4" (38 mm,50 mm, 75 mm, 100 mm)



Pum

pS

pec

ifications

The Gorman–Rupp CompanyP. O. Box 1217, Mansfield, OH 44901-1217

Phone: 419-755-1011 Fax: 419-755-1251 www.gormanrupp.com

Gorman–Rupp of Canada Ltd.70 Burwell Road, St. Thomas, Ontario N5P 3R7 Canada

Phone: 519-631-2870 Fax: 519-631-4624 www.grcanada.com

Form No. AV-05202 02 ⁄ 01 © Copyright, The Gorman-Rupp Company, 2001 Printed in U.S.A.

Documents

Pumps forOriginal Equipment Manufacturers