Pump Product Guide

Experience In Motion

USA and CanadaFlowserve Corporation5215 North O’Connor Blvd. Suite 2300Irving, Texas 75039-5421 USATelephone: +1 937 890 5839

Latin America Flowserve Corporation Martín Rodriguez 4460 B1644CGN-Victoria-San FernandoBuenos Aires, Argentina Telephone: +54 11 4006 8700 Telefax: +54 11 4714 1610

Europe, Middle East, Africa Flowserve CorporationParallelweg 13 4878 AH Etten-LeurThe NetherlandsTelephone: +31 76 502 8100

Asia Pacific Flowserve Pte. Ltd.10 Tuas Loop Singapore 637345 Telephone: +65 6771 0600Telefax: +65 6862 2329

FPD-1004e Printed in USA. January 2012. © Flowserve Corporation

To find your local Flowserve representative:

For more information about Flowserve Corporation,visit www.flowserve.com or call +1 937 890 5839.

8 PANELJUMBO SIZE(13 3/4 X 25)

side B All marks and copy indicated in magenta on this template are for your reference only and

should be deleted before proceeding with actual mechanical.

Approx.4 9/16

Approx.4 5/ 8

Approx.4 9/16

Approx.3 1/8

• Leave3/8”copysafetyfromfold around placement of BOTH outer cards on side B.

• Donotputoutercardonthistemplate. The outer cards are run separately on a different stock.

• Leave3/8”copysafetyfromfold around placement of BOTH outer cards on side B.

• Donotputoutercardonthistemplate. The outer cards are run separately on a different stock.

DESIGNINGFORBESTPRINTRESULTS

1) Followinstructionsontemplatessupplied by Z-Card.

2) Reversetypeandtypebuiltoutofprocess should be no smaller than 10 point.

3) All trim and fold marks must appear ineverycolor.

4) Forbestresultsinprinting,largefieldsofcolor,and/orlogosshouldbe separated as special colors.

AREAFORCARDPLACEMENT

REFERENCEONLY

NOLIVEARTORCOPY

USEOUTERCARDTEMPLATE

AREAFORCARDPLACEMENT

REFERENCEONLY

NOLIVEARTORCOPY

USEOUTERCARDTEMPLATE

Patent BoxMust be placed anywhere in card

• Leaveatleasta1/8"copy safety zone around the inside of the folded inners

• Leaveatleasta1/8"bleed beyond the trim line

Horizontal and Vertical ReciprocatingHS, V, YHT•Flowsto1140m3/h (5000 gpm)•Pressuresto2070bar (30 000 psi)•Temperaturesfrom-40°C (-40°F)to350°C(650°F)

Positive Displacement

Multiphase Twin ScrewMP1•Flowsto1990m3/h(8750gpm)•Pressuresto50bar(720psi)•Temperaturesto450°C(842°F)•Viscositiesto8000cp•GVFto100%

Vertical

Vertical Wet-Pit •Mixedflow•Double-suction•Axialflow

VTP, WUJ•Flowsto13600m3/h (60 000 gpm)•Headsto2000m(6560ft)•Pressuresto200bar(2900psi)•Temperaturesto350°C(660°F)•Settingsto365m(1200ft)

QL, QLQ Double-Suction•Flowsto25000m3/h (110 000 gpm)•Headsto500m(1640ft)•Pressuresto70bar(1015psi)•Temperaturesto200°C(400°F)

AFV, VCT•Flowsto181700m3/h (800 000 gpm)•Headsto110m(350ft)

Vertical Double Case•Single-anddouble-suction first-stage

VPC, QLC, QLQC, WUC, APKC, APKD•Flowsto25000m3/h (110 000 gpm)•Headsto2000m(6560ft)•Pressuresto200bar (2900 psi)•Temperaturesfrom -200°C(-330°F) to350°C(660°F)

Standard SumpESP3•Flowsto1300m3/h(5700gpm)•Headsto90m(300ft)•Pressuresto12bar(175psi)•Temperaturesto180°C(350°F)

VGRP•Flowsto565m3/h (2500 gpm)•Headsto110m(350ft)•Pressuresto17bar(250psi)•Temperaturesfrom-30°C(-20°F) to90°C(200°F)

Heavy-Duty SumpRJ, MJ, LC-S, FRBHJ, ECPJ•Flowsto2700m3/h (12 000 gpm)•Headsto150m(500ft)•Pressuresto20bar(285psi)•Temperaturesto350°C(660°F)

Wet-Pit Solids HandlingMVX•Flowsto17000m3/h(75000gpm)•Headsto40m(130ft)•Sizes250mm(10in)to 1200 mm (48 in)

Vertical Submersible Motor•Deepwell(water-andoil-filleddesigns)•Solidshandling

SUBM•Flowsto6000m3/h (26 415 gpm)•Headsto800m(2625ft)•Motorsizesto5000kW(6700hp)

MSX (Solids Handling)•Flowsto4545m3/h (20 000 gpm)•Headsto90m(300ft)•Sizes80mm(3in)to500mm(20in)•Motorsto224kW(300hp)

NuclearASME, Section III, Class 1, 2 and 3•Primarypumpsandseals•Allsafety-relatedservices•Servicewater•AllBOP—Reactorfeed, condensate and circulating water

Molten Salt VTP•Flowsto13600m3/h (60 000 gpm)•Headsto530m(1740ft)•Pressuresto100bar(1450psi)•Temperaturesto600°C(1100°F)

Concrete VoluteCVP•Flowsto115000m3/h (500 000 gpm)•Headsto45m(147ft)

Specialty

Energy Recovery DevicesERT•Flowsto1200m3/h (5280 gpm)

DWEER™•Brineflowsto350m3/h(1.4MGD)perunit

Special Purpose Equipment and Systems•Reactorrecyclesystems•Hydraulicdecokingsystems•Cryogenicexpanders•Azimuthingthrusters

Univers 57 / 5 poi ts

Twin ScrewTSP•Flowsto2550m3/h (11 200 gpm)•Pressuresto100bar(1450psi)•Temperaturesto450°C(850°F)•Viscositiesto55millioncP

GearGEAREX, GR, GAX•Flowsto275m3/h (1200 gpm)•Pressuresto35bar(500psi)•Temperaturesfrom-50°C(-60°F) to450°C(842°F)•Viscositiesto20000cP

Product Brands of DistinctionACEC™ Centrifugal PumpsAldrich™ PumpsByron Jackson® PumpsCalder™ Energy Recovery DevicesCameron™ PumpsDurco® Process PumpsFlowserve® PumpsIDP ® PumpsLawrence Pumps ®

Niigata Worthington™ PumpsPacific® PumpsPleuger ® PumpsScienco™ PumpsSier-Bath ® Rotary PumpsTKL™ PumpsUnited Centrifugal ® PumpsWestern Land Roller ™ Irrigation PumpsWilson-Snyder ® PumpsWorthington® PumpsWorthington Simpson™ Pumps

Flowserve offers the world's most complete line of pumps for Oil, Gas, Chemical, Power, Water and General Industrial applications. Only a representative sample of these pumps is shown.

• Leaveatleasta1/8”copy safety zone around the inside of the folded inners

8 PANELJUMBO SIZE(13 3/4 X 25)

side A All marks and copy indicated in magenta on this template are for your reference only and

should be deleted before proceeding with actual mechanical.

Overhung Between Bearings

Chemical Process ASME: Mark 3™, Mark 3 Group 4, Guardian, PolyChem S, M and GRP

ISO: Mark 3 ISO, CPXS, Mark 3 ISO Close-Coupled, PolyChem S and M•Flowsto4540m3/h (20 000 gpm)•Headsto300m(985ft)•Pressuresto31bar(450psi)•Temperaturesto400°C(752°F)

Two-Stage Radially Split •Single-anddouble-suctionfirst-stage

HED, HED-DS, WTB (Two-Stage) •Flowsto2500m3/h (11 000 gpm)•Headsto750m(2460ft)•Pressuresto120bar(1750psi)•Temperaturesto450°C(842°F)

Three-Stage Radially Split WTB (Three-Stage)•Flowsto1400m3/h (6165 gpm)•Headsto1100m(3610ft)

Multistage Axially SplitDMX •Flowsto2950m3/h (13 000 gpm)•Headsto2130m(7000ft)•Pressuresto275bar(4000psi)•Temperaturesto200°C(400°F)•Speedsto6000rpm

Multistage Ring SectionWXH, WX, CSX, WDX, WD, F, NM•Flowsto3000m3/h (13 210 gpm)•Headsto2650m(8700ft)•Pressuresto250bar(3625psi)•Temperaturesto250°C(480°F)

Utility Double CaseCSB, CHTA, WNC, HDB/HSB•Flowsto5250m3/h (23 000 gpm)•Headsto4300m(14000ft)•Pressuresto517bar(7500psi)•Temperaturesto425°C(800°F)•Speedsto9000rpm•Powerto52000kW(70000hp)

Process Double CaseWCC, WXB, BP•Flowsto1050m3/h (4620 gpm)•Headsto3500m(11480ft)•Pressuresto295bar(4260psi)•Temperaturesto425°C(800°F)

HSO/HDO, WIK/WIKO•Flowsto4000m3/h(17610gpm)•Headsto7000m(23000ft)•Pressuresto650bar(9425psi)•Temperaturesto450°C(842°F)

Single-Stage Axially Split DVSH, LPNCenterline Mounted API•Flowsto15000m3/h (65 000 gpm)•Headsto565m(1854ft)•Pressuresto150bar(2175psi)•Horsepowerto5600hp

LNN, LN, LNGT, LNNC, LNNV, LR, LNE, LNSFoot Mounted General Industry•Flowsto30000m3/h (132 000 gpm)•Headsto300m(985ft)•Pressuresto40bar(580psi)•Horsepowerto5500hp

Single-Stage Radially Split Double-Suction HDX, HDX-H•Flowsto4100m3/h (18 000 gpm)•Headsto450m(1500ft)•Pressuresto100bar(1450psi)•Temperaturesto450°C(842°F)

HDX-TT Recovery Turbine•Flowsto4100m3/h (18 000 gpm)•Headsto760m(2500ft)

Two-Stage Axially SplitUZDL, LLR•Flowsto2950m3/h (13 000 gpm)•Headsto685m(2250ft)•Pressuresto64bar(910psi)•Temperaturesto200°C(400°F)

API Process HPX, HPXM, HPXT, HPXH, HPXSL, ERPN, PHL•Flowsto2000m3/h (9000 gpm)•Headsto400m(1300ft)•Pressuresto80bar(1160psi)•Temperaturesfrom-160°C(-250°F) to450°C(842°F)

Vertical In-LineMSP, MSP2, PVML, PVXM, HWMA, HWMA2, WMA, WMA2, Mark 3 In-Line•Flowsto500m3/h (2200 gpm)•Headsto900m(2955ft)•Pressuresto60bar(870psi)•Temperaturesto370°C(700°F)

DSVP•Flowsto3400m3/h (15 000 gpm)•Headsto150m(500ft)

Standard Water Pumps•Metallicandnon-metallic•Closecoupledandspacercoupled

ME, MEN, D800, SMP, SMX, DS, MVE•Flowsto5700m3/h (25 000 gpm)•Headsto140m(450ft)•Pressuresto27bar(400psi)•Temperaturesto120°C(250°F)

Slurry/Abrasive•Hardmetal•Rubberlined

R, M, LC, Titan Slurry, Terra Titan•Flowsto10000m3/h (44 000 gpm)•Headsto90m(300ft)•Pressuresto50bar(725psi)•Temperaturesto140°C(285°F)

Paper StockFRBH •Flowsto9085m3/h (40 000 gpm)•Headsto100m(330ft)•Pressuresto14bar(200psi)•Temperaturesto150°C(300°F)

Solids HandlingMF, MN•Flowsto45500m3/h (200 000 gpm)•Headsto90m(300ft)•Sizesto1800mm(72in)

MPT•Flowsto600m3/h (2650 gpm)•Headsto35m(115ft)•Pressuresto5bar(72psi)•Temperaturesto75°C(165°F)•Sizesfrom50mm(2in) to 200 mm (8 in)