Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
Wilson ToolingSystem for
Pullmax machines July 2006
www.wilsontool.ro
Distribuitor:
S.C. SM TECH SRL
Tehnologii şi soluţii pentru industria prelucrării tablelor
Tel: 0040-331-401599 Tel/Fax: 0040-231-515702 Tel Mob: 0040-745-528494 E-mail: [email protected]
www.sm-tech.ro www.wilsontool.ro
Vă stăm la dispoziţie cu plăcere cu orice informaţie sau ofertă pentru scule
Wilson Tool destinate maşinii d-voastră de ştantat CNC
Wilson Tool InternationalStirling RoadSouth Marston Ind. EstateSwindonWiltshire SN3 4TQ
UKTel (Free): (0800) 373748Fax (Free): (0800) 373758IrelandTel (Free): (1-800) 709009 Fax (Free): (1-800) 535538
Office:Tel: +44 (0) 1793 831818Fax: +44 (0) 1793 831945Email: [email protected]://www.wilsontool.com
07/06 TEK
PULLMAX-STYLE TOOLING Optima™ Coating
The New Standard In Tooling Performance!!!
Optima™ is a proprietary TiCN (titanium carbo-nitride)coating that was custom engineered for Wilson Tool. It features unique properties that significantly enhancetooling performance. This coating, which is available only to Wilson Tool customers, provides a level of surface hardness, wear resistance and lubricity neverbefore associated with coated or uncoated punch press tooling.
Some of the manybenefits that you willenjoy with our Optima™coating include:
• Longer tool life
• Increased wear resistance
• More hits between sharpenings
• Reduced adhesion (galling)
• Reduced slug pulling
• Reduced corner breakdown
• Improved special tooling
performance
• Lower overall tooling costs
• In-house coating facilities allow
us to deliver faster and maintain
total quality control
™
51.61mm
45.16mm
38.7mm
32.25mm
25.8mm
19.35mm
12.9mm
6.45mm
0mm
Square mm of Material Adhesion (Galling) On Punch TipsNibbling 2.1mm Aluminium
Using a 6.3mm Square Punch(At 20,000 hits)
Optima™
TiN
M2D2
Am
ou
nt
of
Co
rner
Wea
r
Punch Tip Corner WearNibbling 1.9mm 304 Stainless Steel
Using a 6.3mm Square Punch(At 25,000 hits)
0.76mm
0.64mm
0.5mm
0.38mm
0.25mm
0.13mm
0mm
M2
TiN
Optima™
D2
Using a 7.9mm Round Punch
D2 M2
TiN
Optima™
1,200,000
1,000,000
800,000
600,000
400,000
200,000
0
Nu
mb
er o
f H
its
Number of Hits Before First SharpeningNibbling 1.9mm 304 Stainless Steel
Using a 7.9mm Round Punch
D2M2
TiN
Optima™
Nu
mb
er o
f H
its
Punch LifeNibbling 1.9mm 304 Stainless Steel
10,000,000
9,000,000
8,000,000
7,000,000
6,000,000
5,000,000
4,000,000
3,000,000
2,000,000
1,000,000
0
Punch Life
Number of Hits Tip Wear
Material Adhesion
The yellow area indicates actual results achievedthrough three tool sharpenings of 0.25mm each. The complete graph indicates projected results
with a total of 6mm removed for sharpening.
Wilson Tool InternationalStirling RoadSouth Marston Ind. EstateSwindonWiltshire SN3 4TQ
UKTel (Free): (0800) 373748Fax (Free): (0800) 373758IrelandTel (Free): (1-800) 709009 Fax (Free): (1-800) 535538
Office:Tel: +44 (0) 1793 831818Fax: +44 (0) 1793 831945Email: [email protected]://www.wilsontool.com
07/06 TEK
1
241 SERIES 1.5 mm – 90.0 mm Round
1.50 - 30.0030.01 - 40.0040.01 - 56.0056.01 - 66.0066.01 - 76.20*76.21 - 90.00
“d” DimensionAdd-on forOptimaTM
FLATPUNCH HSS
STANDARD
TOOLS
ROUNDSHEAR
DIE
d
Cat. No. Price
2576825774257802578625792
62140
2576925775257812578725793
62141
Price
1.50 - 40.0040.01 - 56.00
“d” Dimension Cat. No. Price
2598025982
Cat. No.
1.50 - 30.0030.01 - 76.2076.21 - 90.00
“d” Dimension Cat. No. Price
250052502462139
1.50 - 30.0030.01 - 76.20
“d” Dimension Cat. No. Price
6213362132
241 DIE BLADE
URETHANE STRIPPER
1.50 - 76.2076.21 - 90.00
“d” Dimension Cat. No. Price
6214462126
METAL STRIPPER
520
530
720
730
* Requires a keyed collar # 25573
NOTE: Long Tooling can be used,but only with Urethane strippers.This requires a special holder. When long tools have been groundby 0.5mm they can be used with ametal stripper. For furtherinformation, please contact our SalesDesk.
2
Wilson Tool InternationalStirling RoadSouth Marston Ind. EstateSwindonWiltshire SN3 4TQ
UKTel (Free): (0800) 373748Fax (Free): (0800) 373758IrelandTel (Free): (1-800) 709009 Fax (Free): (1-800) 535538
Office:Tel: +44 (0) 1793 831818Fax: +44 (0) 1793 831945Email: [email protected]://www.wilsontool.com
07/06 TEK
520
530
720
730
STANDARD
TOOLS
SQUARE
a
241 SERIES 1.5 mm – 63.65 mm Square
FLATPUNCH HSS SHEAR
1.50 - 21.2221.23 - 28.2928.30 - 39.6039.61 - 46.6846.69 - 53.90*53.91 - 63.65
“a” DimensionAdd-on forOptimaTMCat. No. Price
258142582025826258322583862142
258162582225828258342584062143
PriceCat. No.
DIE
1.50 - 28.2928.30 - 39.60
“a” Dimension Cat. No. Price
2597925981
1.50 - 21.2221.23 - 53.9053.91 - 63.65
“a” Dimension Cat. No. Price
254832551962127
1.50 - 21.2221.23 - 53.90
“a” Dimension Cat. No. Price
6213362132
241 DIE BLADE
URETHANE STRIPPER
1.50 - 53.9053.91 - 63.65
“a” Dimension Cat. No. Price
6214562126
METAL STRIPPER
* Requires a keyed collar # 25573
NOTE: Long Tooling can be used,but only with Urethane strippers.This requires a special holder. When long tools have been groundby 0.5mm they can be used with ametal stripper. For furtherinformation, please contact our SalesDesk.
Wilson Tool InternationalStirling RoadSouth Marston Ind. EstateSwindonWiltshire SN3 4TQ
UKTel (Free): (0800) 373748Fax (Free): (0800) 373758IrelandTel (Free): (1-800) 709009 Fax (Free): (1-800) 535538
Office:Tel: +44 (0) 1793 831818Fax: +44 (0) 1793 831945Email: [email protected]://www.wilsontool.com
07/06 TEK
3
520
530
720
730
STANDARD
TOOLS
RECTANGLE
d
241 SERIES 1.5 mm – 90.0 mm Rectangle
1.50 - 30.0030.01 - 40.0040.01 - 56.0056.01 - 66.0066.01 - 76.20*76.21 - 90.00
“d” DimensionAdd-on forOptimaTM
FLATPUNCH HSS SHEAR
Cat. No. Price
258152582125827258332583962142
258172582325829258352584162143
PriceCat. No.
DIE
1.50 - 40.0040.01 - 56.00
“d” Dimension Cat. No. Price
2597925981
1.50 - 30.0030.01 - 76.2076.21 - 90.00
“d” Dimension Cat. No. Price
254842552062127
1.50 - 30.0030.01 - 76.20
“d” Dimension Cat. No. Price
6213362132
241 DIE BLADE
URETHANE STRIPPER
1.50 - 76.2076.21 - 90.00
“d” Dimension Cat. No. Price
6214562126
METAL STRIPPER
* Requires a keyed collar # 25573
NOTE: Long Tooling can be used,but only with Urethane strippers.This requires a special holder. When long tools have been groundby 0.5mm they can be used with ametal stripper. For furtherinformation, please contact our SalesDesk.
4
Wilson Tool InternationalStirling RoadSouth Marston Ind. EstateSwindonWiltshire SN3 4TQ
UKTel (Free): (0800) 373748Fax (Free): (0800) 373758IrelandTel (Free): (1-800) 709009 Fax (Free): (1-800) 535538
Office:Tel: +44 (0) 1793 831818Fax: +44 (0) 1793 831945Email: [email protected]://www.wilsontool.com
07/06 TEK
520
530
720
730
Standard Shapes
241 SERIES 1.5 mm – 90.0 mm Standard Shapes
FLATPUNCH HSS SHEAR
1.50 - 30.0030.01 - 40.0040.01 - 56.0056.01 - 66.0066.01 - 76.20*76.21 - 90.00
“d” DimensionAdd-on forOptimaTMCat. No. Price
257712577725783257892579562142
257722577825784257902579662143
Price Cat. No.
d
d
d
d
d
d
d
d
OBROUND
HEXAGON
OCTAGON
SINGLE “D”
DOUBLE “D”
LONG “D”
QUADRA “D”
EQUILATERALTRIANGLE
STANDARD
TOOLS
ALL OTHER
STANDARD
SHAPES
DIE
1.50 - 40.0040.01 - 56.00
“d” Dimension Cat. No. Price
2597925981
1.50 - 30.0030.01 - 76.2076.21 - 90.00
“d” Dimension Cat. No. Price
250272500062127
1.50 - 30.0030.01 - 76.20
“d” Dimension Cat. No. Price
6213362132
241 DIE BLADE
URETHANE STRIPPER
1.50 - 76.2076.21 - 90.00
“d” Dimension Cat. No. Price
6214562126
METAL STRIPPER
* Requires a keyed collar # 25573
NOTE: Long Toolingcan be used, butonly with Urethanestrippers. Thisrequires a specialholder. When longtools have beenground by 0.5mmthey can be usedwith a metal stripper.For furtherinformation, pleasecontact our SalesDesk.
Wilson Tool InternationalStirling RoadSouth Marston Ind. EstateSwindonWiltshire SN3 4TQ
UKTel (Free): (0800) 373748Fax (Free): (0800) 373758IrelandTel (Free): (1-800) 709009 Fax (Free): (1-800) 535538
Office:Tel: +44 (0) 1793 831818Fax: +44 (0) 1793 831945Email: [email protected]://www.wilsontool.com
07/06 TEK
5
520
530
720
730
OrbitTool 1.5 mm – 20.0 mm Assembly
OrbitTool 5
OrbitTool 10
Upper AssemblyCat. No. 62146
Standard StripperCat. No. 25959
Fitted StripperCat. No. 25960
DieCat. No. 25958
Upper AssemblyCat. No. 62147
Standard StripperCat. No. 25969
Fitted StripperCat. No. 25970
DieCat. No. 25985
Full AssemblyCat. No. 62148
Full AssemblyCat. No. 62149
6
Wilson Tool InternationalStirling RoadSouth Marston Ind. EstateSwindonWiltshire SN3 4TQ
UKTel (Free): (0800) 373748Fax (Free): (0800) 373758IrelandTel (Free): (1-800) 709009 Fax (Free): (1-800) 535538
Office:Tel: +44 (0) 1793 831818Fax: +44 (0) 1793 831945Email: [email protected]://www.wilsontool.com
07/06 TEK
520
530
720
730
OrbitTool 1.5 mm – 16.0 mm
Round PunchShape PunchSquare Punch
Rectangle Punch
Description Cat. No. PriceAdd-on forOptimaTM
25735257362586925870
MULTI-TOOL 5-STATION PUNCH
Round DieShape DieSquare Die
Rectangle DieMT5 Die Shim Pack
Description Cat. No. Price
2573725738258712587226003
MULTI-TOOL 5-STATION DIE
OrbitTool 1.5 mm – 10.5 mm
Round PunchShape PunchSquare Punch
Rectangle Punch
Description Cat. No. PriceAdd-on forOptimaTM
25809258102587325874
MULTI-TOOL 10-STATION PUNCH
Round DieShape Die
MT10 Die Shim Pack
Description Cat. No. Price
259962599725995
MULTI-TOOL 10-STATION DIE
Wilson Tool InternationalStirling RoadSouth Marston Ind. EstateSwindonWiltshire SN3 4TQ
UKTel (Free): (0800) 373748Fax (Free): (0800) 373758IrelandTel (Free): (1-800) 709009 Fax (Free): (1-800) 535538
Office:Tel: +44 (0) 1793 831818Fax: +44 (0) 1793 831945Email: [email protected]://www.wilsontool.com
07/06 TEK
7
520
530
720
730
Wheel Tool System
Die Shims
● High speed - equal toprogrammed table travelspeed.
● Creates ribs in any contourusing rotation.
● Virtually no nibble marks. ● Rib can be started or ended
anywhere on the sheet. ● Material 0.8 - 2.5 mm. ● Stock sizes 2.5 and 3.0 mm
radii. ● Min. rad. = 16 mm.
Rolling Rib Tool
● High speed - equal toprogrammed table travelspeed.
● Virtually no burrs. ● Creates slits in any contour
using rotation. ● Slit can be started or ended
anywhere on the sheet. ● Material
0.8 - 1.5 mm Stainless Steel 0.8 - 2.0 mm Mild Steel 0.8 - 2.5 mm Aluminium
● Min. rad. = 45 mm.
Rolling Shear Tool
● High speed - equal toprogrammed table travelspeed.
● Creates offsets in anycontour using rotation.
● Virtually no nibble marks. ● Offsets can be started or
ended anywhere on the sheet. ● Material
0.8 - 1.5 mm Stainless Steel 0.8 - 2.0 mm Mild Steel 0.8 - 2.5 mm Aluminium
● Stock sizes 1.5 and 3.0 mm. ● Min. rad. = 25 mm.
Rolling Offset Tool
Not available from Wilson Tool, machine part.(Not to scale)
For further information please contact our Sales Desk
8
Wilson Tool InternationalStirling RoadSouth Marston Ind. EstateSwindonWiltshire SN3 4TQ
UKTel (Free): (0800) 373748Fax (Free): (0800) 373758IrelandTel (Free): (1-800) 709009 Fax (Free): (1-800) 535538
Office:Tel: +44 (0) 1793 831818Fax: +44 (0) 1793 831945Email: [email protected]://www.wilsontool.com
07/06 TEK
520
530
720
730
241 Punch Holder Assembly
Hardened Spacer
0 - 40 mm241 Punch
40 - 76.2 mm 241 Punch
Hardened Spacer
Not available from Wilson Tool, machine part.
Punch Collar KeyCat. No. 62009
Punch AssemblyCat. No. 62081
Punch Collar KeyCat. No. 62009
Punch AssemblyCat. No. 62082
0 - 40 mm 40 - 76.2 mm 76.2 - 90 mm
Keyed Flat PunchCat. No. 25578
Keyed Punch Collar– 0º & 90ºCat. No. 62013
0 - 30 mmStripper
40 - 76.2 mmStripper
30 - 40 mmStripper
Metal Stripper Metal Stripper Metal Stripper
Wilson Tool InternationalStirling RoadSouth Marston Ind. EstateSwindonWiltshire SN3 4TQ
UKTel (Free): (0800) 373748Fax (Free): (0800) 373758IrelandTel (Free): (1-800) 709009 Fax (Free): (1-800) 535538
Office:Tel: +44 (0) 1793 831818Fax: +44 (0) 1793 831945Email: [email protected]://www.wilsontool.com
07/06 TEK
9
ALL
MACHINES
241 Die Blade System
0 - 40 mm 241 Die Blade
40 - 56 mm 241 Die Blade
Shim
40 - 56 mm 241 Die Blade Holder Assembly Cat. No. 25987
Machine Die Holder Cat. No. 62110
Shim
0 - 40 mm 241 Die Blade Holder Assembly Cat. No. 25986
10
Wilson Tool InternationalStirling RoadSouth Marston Ind. EstateSwindonWiltshire SN3 4TQ
UKTel (Free): (0800) 373748Fax (Free): (0800) 373758IrelandTel (Free): (1-800) 709009 Fax (Free): (1-800) 535538
Office:Tel: +44 (0) 1793 831818Fax: +44 (0) 1793 831945Email: [email protected]://www.wilsontool.com
07/06 TEK
520
530
720
730
System for using Trumpf Style Tooling
Size 1 Trumpf Tooling
0 - 30 mm Stripper Cat. No. 62134
Size 1 Die
Machine Die Holder Cat. No. 62109
Punch CollarCat. No. 62008 Punch Collar
Cat. No. 62010
Size 2 Trumpf Tooling
30 - 76.2 mm Stripper Cat. No. 62132
Shim
Machine Die Holder Cat. No. 62110
Size 2 Die
Not available from Wilson Tool, machine part.(Not to scale)
Metal Stripper Metal Stripper
Wilson Tool InternationalStirling RoadSouth Marston Ind. EstateSwindonWiltshire SN3 4TQ
UKTel (Free): (0800) 373748Fax (Free): (0800) 373758IrelandTel (Free): (1-800) 709009 Fax (Free): (1-800) 535538
Office:Tel: +44 (0) 1793 831818Fax: +44 (0) 1793 831945Email: [email protected]://www.wilsontool.com
07/06 TEK
11
4000
5000
6000
System for using Trumpf Style Tooling
Punch Holder Assembly Cat. No. 62120
Size 1 Trumpf Tooling
0 - 30 mm Stripper Cat. No. 62014
Size 1 Die
Machine Die Holder Cat. No. 62109
Cat. No. 62094
Shim
Punch Holder Claw(10 mm Thread) Cat. No. 62102
Punch Bush Cat. No. 62004
Size 2 Trumpf Tooling
30 - 76.2 mm Stripper Cat. No. 62015
Shim
Machine Die Holder Cat. No. 62110
Size 2 Die
Cat. No. 62010Cat. No. 62008
12
Wilson Tool InternationalStirling RoadSouth Marston Ind. EstateSwindonWiltshire SN3 4TQ
UKTel (Free): (0800) 373748Fax (Free): (0800) 373758IrelandTel (Free): (1-800) 709009 Fax (Free): (1-800) 535538
Office:Tel: +44 (0) 1793 831818Fax: +44 (0) 1793 831945Email: [email protected]://www.wilsontool.com
07/06 TEK
4000
5000
6000
241 Punch Holder Assembly
Punch Holder Assembly Cat. No. 62120
0 - 40 mm 241 Punch Holder
Assembly Cat. No. 62098
Hardened Spacer
0 - 40 mm 241 Punch
0 - 30 mm Stripper
Cat. No. 62080
30 - 40 mm Stripper
Cat. No. 62015
40 - 76.2 mm Stripper
Cat. No. 62015
40 - 76.2 mm 241 Punch
Hardened Spacer
40 - 76.2 mm 241 Punch Holder
Assembly Cat. No. 62099
Shim Shim
Wilson Tool InternationalStirling RoadSouth Marston Ind. EstateSwindonWiltshire SN3 4TQ
UKTel (Free): (0800) 373748Fax (Free): (0800) 373758IrelandTel (Free): (1-800) 709009 Fax (Free): (1-800) 535538
Office:Tel: +44 (0) 1793 831818Fax: +44 (0) 1793 831945Email: [email protected]://www.wilsontool.com
07/06 TEK
13
ALL
MACHINES
Shim Packs
Punch Shim Pack0 – 40 mm 241 Hardened Punch Spacer40 – 76 mm 241 Hardened Punch Spacer
0 – 40 mm Die Blade Shim Pack40 – 56 mm Die Blade Shim Pack
Shim
241 SHIM PACKS
Cat. No. Price
6200525806258072598325984
0 – 10 mm Insert Punch Shim Pack0 – 10 mm Die Shim Pack0 – 20 mm Die Shim Pack0 – 16 mm Die Shim Pack
0 – 10.5 mm Die Shim Pack
Shim
888510
OrbitTool
OrbitTool 8, 5 & 10 SHIM PACKS
Cat. No. Price
6206662055620562600325995
Punch Shim Pack*Size 1 Die Shim PackSize 2 Die Shim Pack
76.2 – 90.0 mm Die Shim Pack
Shim
TRUMPF SHIM PACKS
Cat. No. Price
62005620236202462136
Punch Shim Pack*Die Shim Pack
Shim
HEAVY DUTY SHIM PACKS
Cat. No. Price
6200562024
Punch Shim PackDie Shim Pack
Shim
WHEEL TOOL SHIM PACKS
Cat. No. Price
6200562024
* For 4000, 5000 and 6000 machines only
14
Wilson Tool InternationalStirling RoadSouth Marston Ind. EstateSwindonWiltshire SN3 4TQ
UKTel (Free): (0800) 373748Fax (Free): (0800) 373758IrelandTel (Free): (1-800) 709009 Fax (Free): (1-800) 535538
Office:Tel: +44 (0) 1793 831818Fax: +44 (0) 1793 831945Email: [email protected]://www.wilsontool.com
07/06 TEK
ALL
MACHINES
Special Tooling
Wilson Tool are the specialists inform tools, and there is a largevariation in types available.Whether it is a simple embossingtool or a complex progression toolcontact Wilson Tool for the bestadvice on your requirements.
Wilson Tool InternationalStirling RoadSouth Marston Ind. EstateSwindonWiltshire SN3 4TQ
UKTel (Free): (0800) 373748Fax (Free): (0800) 373758IrelandTel (Free): (1-800) 709009 Fax (Free): (1-800) 535538
Office:Tel: +44 (0) 1793 831818Fax: +44 (0) 1793 831945Email: [email protected]://www.wilsontool.com
07/06 TEK
15
4000
5000
6000
241 SERIES 1.5 mm – 76.2 mm Round
1.50 - 30.0030.01 - 40.0040.01 - 56.0056.01 - 66.0066.01 - 76.20
“d” DimensionAdd-on forOptimaTM
FLATPUNCH HSS
STANDARD
TOOLS
ROUNDSHEAR
DIE
d
Cat. No. Price
2576825774257802578625792
2576925775257812578725793
Price
1.50 - 40.0040.01 - 56.00
“d” Dimension Cat. No. Price
2598025982
Cat. No.
1.50 - 30.0030.01 - 76.20
“d” Dimension Cat. No. Price
2500525024
1.50 - 30.0030.01 - 76.20
“d” Dimension Cat. No. Price
6201462015
241 DIE BLADE
STRIPPER
16
Wilson Tool InternationalStirling RoadSouth Marston Ind. EstateSwindonWiltshire SN3 4TQ
UKTel (Free): (0800) 373748Fax (Free): (0800) 373758IrelandTel (Free): (1-800) 709009 Fax (Free): (1-800) 535538
Office:Tel: +44 (0) 1793 831818Fax: +44 (0) 1793 831945Email: [email protected]://www.wilsontool.com
07/06 TEK
4000
5000
6000
STANDARD
TOOLS
SQUARE
a
241 SERIES 1.5 mm – 53.9 mm Square
FLATPUNCH HSS SHEAR
1.50 - 21.2221.23 - 28.2928.30 - 39.6039.61 - 46.6846.69 - 53.90
“a” DimensionAdd-on forOptimaTMCat. No. Price
2581425820258262583225838
2581625822258282583425840
PriceCat. No.
DIE
1.50 - 28.2928.30 - 39.60
“a” Dimension Cat. No. Price
2597925981
1.50 - 21.2221.23 - 53.90
“a” Dimension Cat. No. Price
2548325519
1.50 - 21.2221.23 - 53.90
“a” Dimension Cat. No. Price
6201462015
241 DIE BLADE
STRIPPER
Wilson Tool InternationalStirling RoadSouth Marston Ind. EstateSwindonWiltshire SN3 4TQ
UKTel (Free): (0800) 373748Fax (Free): (0800) 373758IrelandTel (Free): (1-800) 709009 Fax (Free): (1-800) 535538
Office:Tel: +44 (0) 1793 831818Fax: +44 (0) 1793 831945Email: [email protected]://www.wilsontool.com
07/06 TEK
17
4000
5000
6000
STANDARD
TOOLS
RECTANGLE
d
241 SERIES 1.5 mm – 76.2 mm Rectangle
1.50 - 30.0030.01 - 40.0040.01 - 56.0056.01 - 66.0066.01 - 76.20
“d” DimensionAdd-on forOptimaTM
FLATPUNCH HSS SHEAR
Cat. No. Price
2581525821258272583325839
2581725823258292583525841
PriceCat. No.
DIE
1.50 - 40.0040.01 - 56.00
“d” Dimension Cat. No. Price
2597925981
1.50 - 30.0030.01 - 76.20
“d” Dimension Cat. No. Price
2548425520
1.50 - 30.0030.01 - 76.20
“d” Dimension Cat. No. Price
6201462015
241 DIE BLADE
STRIPPER
18
Wilson Tool InternationalStirling RoadSouth Marston Ind. EstateSwindonWiltshire SN3 4TQ
UKTel (Free): (0800) 373748Fax (Free): (0800) 373758IrelandTel (Free): (1-800) 709009 Fax (Free): (1-800) 535538
Office:Tel: +44 (0) 1793 831818Fax: +44 (0) 1793 831945Email: [email protected]://www.wilsontool.com
07/06 TEK
4000
5000
6000
Standard Shapes
241 SERIES 1.5 mm – 76.2 mm Standard Shapes
FLATPUNCH HSS SHEAR
1.50 - 30.0030.01 - 40.0040.01 - 56.0056.01 - 66.0066.01 - 76.20
“d” DimensionAdd-on forOptimaTMCat. No. Price
2577125777257832578925795
2577225778257842579025796
Price Cat. No.
d
d
d
d
d
d
d
d
OBROUND
HEXAGON
OCTAGON
SINGLE “D”
DOUBLE “D”
LONG “D”
QUADRA “D”
EQUILATERALTRIANGLE
STANDARD
TOOLS
ALL OTHER
STANDARD
SHAPES
DIE
1.50 - 40.0040.01 - 56.00
“d” Dimension Cat. No. Price
2597925981
1.50 - 30.0030.01 - 76.20
“d” Dimension Cat. No. Price
2502725000
1.50 - 30.0030.01 - 76.20
“d” Dimension Cat. No. Price
6201462015
241 DIE BLADE
STRIPPER
Wilson Tool InternationalStirling RoadSouth Marston Ind. EstateSwindonWiltshire SN3 4TQ
UKTel (Free): (0800) 373748Fax (Free): (0800) 373758IrelandTel (Free): (1-800) 709009 Fax (Free): (1-800) 535538
Office:Tel: +44 (0) 1793 831818Fax: +44 (0) 1793 831945Email: [email protected]://www.wilsontool.com
07/06 TEK
19
4000
5000
6000
OrbitTool 1.5 mm – 20.0 mm Assembly
● Maximum force for the
OrbitTool is 60KN. ● Maximum material thickness
is 4 mm. ● Maximum hit rate 500 /Min. ● It is not recommended to
nibble with the OrbitTool.
Notes:0 - 10 mm Insert Punches.
Round Only.
0 - 20 mm Punch
OrbitTool Upper Assembly
Cat. No. 62104
0 - 20 mm Die
0 - 10 mm Die. Round Only
Shim OrbitTool Lower
Assembly Cat. No. 62044
20
Wilson Tool InternationalStirling RoadSouth Marston Ind. EstateSwindonWiltshire SN3 4TQ
UKTel (Free): (0800) 373748Fax (Free): (0800) 373758IrelandTel (Free): (1-800) 709009 Fax (Free): (1-800) 535538
Office:Tel: +44 (0) 1793 831818Fax: +44 (0) 1793 831945Email: [email protected]://www.wilsontool.com
07/06 TEK
4000
5000
6000
OrbitTool 1.5 mm – 20.0 mm Round
STANDARD
TOOLS
ROUND
d
1.50 - 5.005.01 - 10.00
“d” Dimension Cat. No. PriceAdd-on forOptimaTM
6206962070
INSERT PUNCH0 – 10 mm
1.50 - 20.00
“d” Dimension Cat. No. PriceAdd-on forOptimaTM
62071
PUNCH0 – 20 mm
0 - 5.005.00 - 10.00
“d” Dimension Cat. No. Price
6206162067
INSERT HOLDERASSEMBLY
1.50 - 12.0012.01 - 20.00
“d” Dimension Cat. No. Price
6207462075
DIE0 – 20 mm
1.50 - 10.00
“d” Dimension Cat. No. Price
62073
DIE0 – 10 mm
Wilson Tool InternationalStirling RoadSouth Marston Ind. EstateSwindonWiltshire SN3 4TQ
UKTel (Free): (0800) 373748Fax (Free): (0800) 373758IrelandTel (Free): (1-800) 709009 Fax (Free): (1-800) 535538
Office:Tel: +44 (0) 1793 831818Fax: +44 (0) 1793 831945Email: [email protected]://www.wilsontool.com
07/06 TEK
21
4000
5000
6000
OrbitTool 1.5 mm – 20.0 mm Standard Shapes
1.50 - 20.00
“d” Dimension Cat. No. PriceAdd-on forOptimaTM
62072
PUNCH0 – 20 mm
1.50 - 12.0012.01 - 20.00
“d” Dimension Cat. No. Price
6207662077
DIE0 – 20 mm
STANDARD
SHAPED
TOOLS
22
Wilson Tool InternationalStirling RoadSouth Marston Ind. EstateSwindonWiltshire SN3 4TQ
UKTel (Free): (0800) 373748Fax (Free): (0800) 373758IrelandTel (Free): (1-800) 709009 Fax (Free): (1-800) 535538
Office:Tel: +44 (0) 1793 831818Fax: +44 (0) 1793 831945Email: [email protected]://www.wilsontool.com
07/06 TEK
4000
5000
6000
Heavy Duty Punch System
RoundShaped
Up to 76.20 mmAdd-on forOptimaTM
FLATPUNCH HSS SHEAR
STRIPPER
Cat. No. Price
6209062121
6209262122
Price
RoundShaped
Up to 56.00 mm Cat. No. Price
2518025162
Cat. No.
Up to 76.20 mm
“d” Dimension Cat. No. Price
62093
DIE
● Minimum punch ø10.0 mm. ● Maximum die ø is 56.0 mm. For sizes
over this, the solution is based on theapplication.
● Punches have extra back taper asstandard.
● 1.0 mm rads. on corners will increase thelife of the punch and die.
● Roof top shear recommended as long asshear depth is a minimum 50% ofmaterial thickness.
● Heavy duty punch to be used on 6 mmmaterial and above and when thepunching force is over 200KN.
● Heavy duty die to be used when thepunching force is over 180KN.
● Check the size required does not exceedthe machine punching force.
● Optima is strongly recommended forheavy duty punches.
Notes:
Punch Holder Assembly Cat. No. 62120
Shim
Heavy Duty Stripper
Heavy Duty Punch
Heavy Duty Die
Shim
Machine Die Holder Cat. No. 62110
Wilson Tool InternationalStirling RoadSouth Marston Ind. EstateSwindonWiltshire SN3 4TQ
UKTel (Free): (0800) 373748Fax (Free): (0800) 373758IrelandTel (Free): (1-800) 709009 Fax (Free): (1-800) 535538
Office:Tel: +44 (0) 1793 831818Fax: +44 (0) 1793 831945Email: [email protected]://www.wilsontool.com
07/06 TEK
23
4000
5000
6000
Wheel Tool System
Punch Holder Assembly Cat. No. 62025
Punch Shim
Die Shims
● High speed - equal toprogrammed table travelspeed.
● Creates ribs in any contourusing rotation.
● Virtually no nibble marks. ● Rib can be started or ended
anywhere on the sheet. ● Material 0.8 - 2.5 mm. ● Stock sizes 2.5 and 3.0 mm
radii. ● Min. rad. = 16 mm.
Rolling Rib Tool
● High speed - equal toprogrammed table travelspeed.
● Virtually no burrs. ● Creates slits in any contour
using rotation. ● Slit can be started or ended
anywhere on the sheet. ● Material
0.8 - 1.5 mm Stainless Steel 0.8 - 2.0 mm Mild Steel 0.8 - 2.5 mm Aluminium
● Min. rad. = 45 mm.
Rolling Shear Tool
● High speed - equal toprogrammed table travelspeed.
● Creates offsets in anycontour using rotation.
● Virtually no nibble marks. ● Offsets can be started or
ended anywhere on the sheet. ● Material
0.8 - 1.5 mm Stainless Steel 0.8 - 2.0 mm Mild Steel 0.8 - 2.5 mm Aluminium
● Stock sizes 1.5 and 3.0 mm. ● Min. rad. = 25 mm.
Rolling Offset Tool
For further information please contact our Sales Desk
24
Wilson Tool InternationalStirling RoadSouth Marston Ind. EstateSwindonWiltshire SN3 4TQ
UKTel (Free): (0800) 373748Fax (Free): (0800) 373758IrelandTel (Free): (1-800) 709009 Fax (Free): (1-800) 535538
Office:Tel: +44 (0) 1793 831818Fax: +44 (0) 1793 831945Email: [email protected]://www.wilsontool.com
07/06 TEK
Visit us online at: www.wilsontool.comEmail: [email protected]
United StatesWorldwideHeadquarters12912 Farnham AvenueWhite Bear LakeMN 55110USA
Tel: (651) 286 6001Fax: (651) 286 [email protected]
United KingdomEuropean HeadquartersStirling RoadSouth Marston Industrial EstateSwindonWiltshire SN3 4TQUnited Kingdom
Tel: +44 (0)1793 831818Fax: +44 (0)1793 831945 [email protected]
FranceBât B51 Rue D’Ourdy77550 RéauFrance
Tel: +33 (0)1 64 13 47 80Fax: +33 (0)1 64 13 47 [email protected]
GermanyGottlieb Daimler Str 231552 RodenbergGermany
Tel: +49 5723-7470Fax: +49 [email protected]
ScandinaviaIslevdalvej 100DK-2610RødovreDenmark
Tel: +45 44 53 16 99Fax: +45 44 53 06 [email protected]
ChinaNo. 6 Building of 584018 Lane Huaning RoadXinzhuang Industry Park201108 ShanghaiChina
Tel: +86 21 51089638Fax: +86 21 [email protected]
Wilson Tool International
www.wilsontool.ro
Distribuitor:
S.C. SM TECH SRL
Tehnologii şi soluţii pentru industria prelucrării tablelor
Tel: 0040-331-401599 Tel/Fax: 0040-231-515702 Tel Mob: 0040-745-528494 E-mail: [email protected]
www.sm-tech.ro www.wilsontool.ro
Vă stăm la dispoziţie cu plăcere cu orice informaţie sau ofertă pentru scule
Wilson Tool destinate maşinii d-voastră de ştantat CNC