1

PUBLICATIONS Book Chapters (invited) 1. Lanza di Scalea, F., Srivastava, A. and Nucera, C., “Nonlinear Guided Waves and Thermal

Stresses,” Chapter 9 of Nonlinear Acoustic Techniques for Nondestructive Evaluation, ed. by T. Kundu, Acoustical Society of American, Springer, 2017.

2. Lanza di Scalea, F. and Cloud, G., Nondestructive Testing Chapter, 12th edition of the Standard Mechanical Engineering Mark’s Handbook, McGraw Hill, 2017.

3. Tippmann, J.D. and Lanza di Scalea, F., “Passive-Only Defect Detection and Imaging in Composites Using Diffuse Fields,” Mechanics of Composite and Multi-functional Materials, Volume 7, K. Zimmerman (Ed.), 978-3-319-21761-1, 339221-1-En, (8), Springer, 2015.

4. Nucera, C. and Lanza di Scalea, F., “Ultrasonic Nonlinear Guided Waves and Applications to Structural Health Monitoring,” Residual Stress, Thermomechanics & Infrared Imaging, Hybrid Techniques and Inverse Problems, Volume 8, M. Rossi et al. (eds.), DOI 10.1007/978-3-319-00876-9_16, The Society for Experimental Mechanics, Inc., 2014.

5. Lanza di Scalea, F., Kim, H., White, S., Chen, Z., Salamone, S., and Bartoli, I., “Impact Monitoring In Aerospace Panels Via Piezoelectric Rosettes,” Composite Materials and Joining Technologies for Composites, Vol. 7, E. Patterson et al. (eds.), 7 pgs., 2012.

6. Nucera, C. and Lanza di Scalea, F., “Higher Harmonic Generation Analysis in Complex Waveguides via a Nonlinear Semi-Analytical Finite Element Algorithm," Mathematical Problems in Engineering, Special Issue on New Strategies and Challenges in SHM for Aerospace and Civil Structures, Hindawi Publishing Corporation, vol. 2012, doi:10.1155/2012/365630, 16 pgs., 2012.

7. Rizzo, P., Coccia, S., Bartoli, I., and Lanza di Scalea, F., “Non-contact Rail Monitoring by Ultrasonic Guided Waves,” Chapter 145 of Encyclopedia of Structural Health Monitoring, C. Boller, F-K. Chang, and Y. Fujino, eds., John Wiley & Sons, Chichester, U.K., pp. 2397-2410, 2009.

8. Lanza di Scalea, F., Bartoli, I., Rizzo, P., Marzani, A., Sorrivi, E., and Viola, E., “Structural Health Monitoring of Multi-wire Strands,” Chapter 151 of Encyclopedia of Structural Health Monitoring, C. Boller, F-K. Chang, and Y. Fujino, eds., John Wiley & Sons, Chichester, U.K., pp. 2487-2503, 2009.

9. Lanza di Scalea, F., Rizzo, P., Coccia, S., Bartoli, I., and Fateh.M., “On-Line High-speed Rail Defect Detection – Phase III,” Chapter 4 of Technology in Rail Transport Management, P.S. Ranade, ed., The Icfai University Press, India, pp. 55-65, 2007.

10. Lanza di Scalea, F. “Ultrasonic Testing Applications in the Railroad Industry,” Chapter 15: Special Applications of Ultrasonic Testing, in Non-destructive Testing Handbook, 3rd edition, P.O. Moore, ed., American Society for Nondestructive Testing, pp. 535-552, 2007.

11. Rizzo, P. and Lanza di Scalea, F. “Wavelet-based Unsupervised and Supervised Learning Algorithms for Ultrasonic Structural Monitoring of Waveguides,” Chapter 8, Progress in Smart Materials and Structures Research, P. L. Reece, ed., Nova Editorial, pp. 227-290, 2006.

Journal Articles 12. Lanza di Scalea, F., Zhu, X., Capriotti, M., Liang, A., Mariani, S., and Sternini, S., “Passive

Extraction of Dynamic Transfer Function from Arbitrary Ambient Excitations: Application to High-speed Rail Inspection from Wheel-generated Waves,” ASME Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems, 1(1), pp. 0110051- 01100512, 2018.

13. Mariani, S., Nguyen, T., and Lanza di Scalea, F., “Air-Coupled Ultrasonic Testing of Rails: Experimental Prototype and Finite Element Simulations,” Materials Evaluation, in press, 2017.

14. Mariani, S. and Lanza di Scalea, F., “Predictions of Defect Detection Performance of Air-Coupled Ultrasonic Rail Inspection System,” Structural Health Monitoring (SHM) International Journal, pp. 1-22, published online July 2017 (DOI: 10.1177/1475921717715429).

2

15. Lanza di Scalea, F., Sternini, S. and Nguyen, T., “Ultrasonic Imaging in Solids Using Wave Mode Beamforming,” IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control (IEEE-UFFC), 64(3), pp. 602-616, 2017.

16. Capriotti, M., Kim, HE, Lanza di Scalea, F., and Kim, H., “Nondestructive Inspection of Impact Damage in Composite Aircraft Panels by Ultrasonic Guided Waves and Statistical Processing,” (invited paper) Materials Journal, Special Issue on Structural Health Monitoring for Aerospace Applications, V. Giurgiutiu and S. Yuan eds., MDPI, Switzerland, 10, 616, pp. 1-12, 2017.

17. Mariani, S., Nguyen, T., Zhu, X. and Lanza di Scalea, F., “Field Test Performance of Non-contact Ultrasonic Rail Inspection System,” ASCE Journal of Transportation Engineering, Part A: Systems, 143(5), 2017.

18. Zhu, X. and Lanza di Scalea, F., “Thermal Stress Measurement in Continuous Welded Rails Using the Hole-Drilling Method,” Experimental Mechanics, 57, pp. 165-178, 2017.

19. Zhu, X. and Lanza di Scalea, F., “Sensitivity to Axial Stress of Electro-Mechanical Impedance Measurements,” Experimental Mechanics, 56, pp. 1599-1610, 2016.

20. Pau, A. and Lanza di Scalea, F., “Nonlinear Guided Wave Propagation in Prestressed Plates,” Journal of the Acoustical Society of America, 137(3), pp. 1529-1540, 2015.

21. Bazilevs, Y., Deng, X., Korobenko, A., Lanza di Scalea, F., Todd, M.D. and Taylor, S.G., “Isogeometric Fatigue Damage Prediction in Large-Scale Composite Structures Driven by Dynamic Sensor Data,” ASME Journal of Applied Mechanics, 82(9), pp. 0910081-09100812, 2015.

22. Kijanka, P., Manohar, A., Lanza di Scalea, F. and Staszewski, W., "Damage Location by Ultrasonic Lamb Waves and Piezoelectric Rosettes", Journal of Intelligent Materials Systems and Structures, in press (doi: 10.1177/1045389X14544140), 2015.

23. Kijanka, P, Packo, P., Zhu, X., Staszewski, WJ., and Lanza di Scalea, F., “Actuation Stress Modelling of Piezoceramic Transducers Under Variable Temperature Field,” Journal of Intelligent Materials Systems and Structures, in press (doi: 10.1177/1045389X15571382), pp. 1-13, 2015.

24. Nucera, C., White, S., Chen, Z. M., Kim, H., and Lanza di Scalea, F., “Impact Monitoring In Stiffened Composite Aerospace Panels By Wave Propagation,” Structural Health Monitoring International Journal, 14(6), pp. 547-557, 2015.

25. Kijanka, P, Packo, P., Zhu, X., Staszewski, WJ., and Lanza di Scalea, F., “Three-Dimensional Temperature Effect Modelling of Piezoceramic Transducers Used for Lamb Wave Based Damage Detection,” Smart Materials and Structures, 24(6), pp. 1-10, 2015.

26. Nucera, C. and Lanza di Scalea, F., “Modeling of Nonlinear Guided Waves and Applications To Structural Health Monitoring,” ASCE Journal of Computing in Civil Engineering, Special Issue on Computing, SangHyun Lee, Burcin Becerik-Gerber, and Ioannis Brilakis, eds., 29(4), pp. B40140011- B401400115, 2015. (invited paper)

27. Tippmann, J., Zhu, P., and Lanza di Scalea, F.,” Application of Damage Detection Methods Using Passive Reconstruction of Impulse Response Functions,” Philosophical Transactions of the Royal Society A – Mathematical, Physical and Engineering Sciences, Special Issue on New Perspectives in Offshore-Wind and Sea-Wave Energy Production, 373(2035), pp. 1-17, 2015. (invited paper)

28. Nucera, C. and Lanza di Scalea, F., “Nondestructive Measurement of Neutral Temperature in Continuous Welded Rails By Nonlinear Ultrasonic Guided Waves,” Journal of the Acoustical Society of America, 136(5), pp. 2561-2574, 2014.

29. Tippmann, J. and Lanza di Scalea, F., “Passive-Only Damage Detection by Reciprocity of Green’s Functions Reconstructed From Diffuse Acoustic Fields with Application to Wind Turbine Blades,” Journal of Intelligent Material Systems and Structures, in press (doi: 10.1177/1045389X14538539), published on-line before print 2014.

30. Nucera, C. and Lanza di Scalea, F., “Nonlinear Wave Propagation in Constrained Solids Subjected To Thermal Loads,” Journal of Sound and Vibration, 333(2), pp. 541-554, 2014.

31. Nucera, C. and Lanza di Scalea, F., “Nonlinear Semi-Analytical Finite Element Algorithm for the Analysis of Internal Resonance Conditions In Complex Waveguides,” ASCE Journal of Engineering Mechanics, 140(3), pp. 502-522, 2014.

3

32. Manohar, A. and Lanza di Scalea, F., “Wavelet-aided Multivariate Outlier Analysis to Enhance Defect Contrast in Thermal Images,” Experimental Techniques, 38(1), pp. 28-37, 2014.

33. Manohar, A. and Lanza di Scalea, F., “Detection of Defects In Wind Turbine Composite Blades Using Statistically-Enhanced Lock-In Thermography,” Structural Health Monitoring International Journal, Special Issue on Noncontact Measurement Technologies, 12(5-6), pp. 566-574, 2014.

34. Mariani, S., Nguyen, T., Phillips, R., Kijanka, P., Lanza di Scalea, F., Staszewski, W., Fateh, M. and Carr, G., “Non-Contact Air-Coupled Ultrasonic Guided Wave Inspection of Rails,” Structural Health Monitoring International Journal, Special Issue on Noncontact Measurement Technologies, 12(5-6), pp. 539-548, 2014.

35. Manohar, A. and Lanza di Scalea, F., “Modeling 3-D Heat Flow Interaction with Defects in Composite Materials for Infrared Thermography,” NDT&E International Journal, 66, pp. 1-7, 2014.

36. Manohar A. and Lanza di Scalea, F., “Determination of Defect Depth and Size Using Virtual Heat Sources in Pulsed Infrared Thermography,” Experimental Mechanics, 53(4), pp. 661-671, 2013.

37. Nucera, C., Phillips, R., Lanza di Scalea, F., Fateh, M. and Carr, G., “RAIL-NT System for the In-situ Measurement of Neutral Temperature in CWR: Results from Laboratory and Field Tests,” Transportation Research Record: Journal of the Transportation Research Board, no. 2374, Washington DC, pp. 154-161, 2013.

38. Lanza di Scalea, F., Rizzo, P., Salamone, S., Bartoli, I., Al-Nazer, L., “Ultrasonic Tomography for Three-Dimensional Imaging of Internal Rail Flaws: Proof-of-principle Numerical Simulations,” Transportation Research Record: Journal of the Transportation Research Board, no. 2374, Washington DC, pp. 162-168, 2013.

39. Nucera, C., Phillips, R., and Lanza di Scalea, F., “Ultrasonic Guided Wave Monitoring of Railroad Tracks,” Advances in Science and Technology, 83, pp. 198-207, 2013.

40. Phillips, R., Zhu, X., and Lanza di Scalea, F., “The Influence of Stress on Electro-mechanical Impedance Measurements in Rail Steel,” Materials Evaluation, 70(10), pp. 1213-1218, 2012. (invited paper)

41. Salamone, S., Veletzsos, M., Lanza di Scalea, F., and Restrepo, J., “Detection of Initial Yield and Onset of Failure in Bonded Post-tensioned Concrete Beams,” ASCE Journal of Bridge Engineering, Special Issue on NDE/NDT for Bridge Inspection and Evaluation, 17(6), pp. 966-974, 2012.

42. Salamone, S., Bartoli, I., Phillips, R., Nucera, C., and Lanza di Scalea, F., “Health Monitoring of Prestressing Tendons in Post-Tensioned Concrete Bridges,” Journal of the Transportation Research Board, Transportation Research Record no. 2220, pp. 21-27, 2011.

43. Coccia, S., Phillips, R., Bartoli, I., Salamone, S., Lanza di Scalea, F., Fateh, M., and Carr, G., “UCSD/FRA Non-contact Ultrasonic Guided Wave System for Rail Inspection: An Update,” Journal of the Transportation Research Board, Transportation Research Record no. 2261, pp. 143-147, 2011.

44. Nucera, C. and Lanza di Scalea, F., “Monitoring Load Levels in Multi-wire Strands by Nonlinear Ultrasonic Waves,” Structural Health Monitoring International Journal, 10(6), pp. 617-629, 2011.

45. Coccia, S., Bartoli, I., Marzani, A., Lanza di Scalea, F., Salamone, S. and Fateh, M., “Numerical and Experimental Study of Guided Waves for Detection of Rail Head Defects,” NDT&E International, 44(1), pp. 93-100, 2011.

46. Bartoli, I., Salamone, S., Phillips, R., Lanza di Scalea, F. and Sikorsky, C., “Use of Interwire Ultrasonic Leakage to Quantify Loss of Prestress in Multiwire Tendons,” ASCE Journal of Engineering Mechanics, 137(5), pp. 324-333, 2011.

47. Rizzo, P., Cammarata, M., Bartoli, I., Lanza di Scalea, F., Salamone, S., Coccia, S. and Phillips, R., “Ultrasonic Guided Wave-based Monitoring of Rail Head: Laboratory and Field Tests,” Advances in Civil Engineering - Special Issue on Structural Health Monitoring for Civil Structures: From the Lab to the Field, vol. 2010, Art. ID 291293, pp. 1-13, 2010 (invited).

48. Bartoli, I., Phillips, R., Coccia, S., Srivasatava, A., Lanza di Scalea, F., Fateh, M. and Carr, G., “Stress Dependence of Ultrasonic Guided Waves in Rails,” Journal of the Transportation Research Board, Transportation Research Record no. 2159, pp. 91-97, 2010.

4

49. Srivastava, A. and Lanza di Scalea, F., “Quantitative Structural Health Monitoring by Ultrasonic Guided Waves,” ASCE Journal of Engineering Mechanics, 136(8), pp. 937-944, 2010.

50. Srivastava, A. and Lanza di Scalea, F., “Quantitative Structural Health Monitoring by Ultrasonic Guided Waves,” International Journal of Condition Monitoring and Diagnostic Engineering Management (COMADEM), Special Issue on Structural Health Monitoring, 13(1), pp. 26-33, 2010 (invited).

51. Srivastava, A. and Lanza di Scalea, F., “Higher-harmonic generation in Nonlinear Waveguides of Arbitrary Cross-section,” Journal of the Acoustical Society of America, 127(5), pp. 2790-2796, 2010.

52. Srivastava, A. and Lanza di Scalea, F., “On the Existence of Longitudinal or Flexural Waves in Rods at Nonlinear Higher Harmonics,” Journal of Sound and Vibration, 329, pp. 1499-1506, 2010.

53. Coccia, S., Salamone, S., Bartoli, I., Phillips, R., Lanza di Scalea, F., Fateh, M. and Carr, G., “Non-contact Ultrasonic Guided Wave Detection of Rail Defects,” Journal of the Transportation Research Board, Transportation Research Record, no. 2117, pp. 77-84, 2009.

54. Salamone, S., Bartoli, I., Di Leo, P., Lanza di Scalea, F., Ajovalasit, A., D’Acquisto, L., Rhymer, J., and Kim, H., “High-velocity Impact Location on Aircraft Panels Using Macro-fiber Composite Piezoelectric Rosettes,” Journal of Intelligent Materials Systems and Structures, 21(9), pp. 887-896, 2010.

55. Salamone, S., Bartoli, I., Lanza di Scalea, F., and Coccia, S., “Guided-wave Health Monitoring of Aircraft Composite Panels under Changing Temperature,” Journal of Intelligent Materials Systems and Structures, 20, pp. 1079-1090, 2009.

56. Srivastava, A. and Lanza di Scalea, F., “On the Existence of Symmetric or Antisymmetric Lamb Waves at Nonlinear Higher Harmonics,” Journal of Sound and Vibration, 323 (3-5), pp. 932-943, 2009.

57. Salamone, S., Fasel, T., Bartoli, I., Srivastava, A., Lanza di Scalea, F., and Todd, M., “Structural Health Monitoring of Adhesively-Bonded Joints in Aerospace Structures,” Materials Evaluation, Special Issue on Bond Inspection, pp. 828-836, July 2009 (invited).

58. Lanza di Scalea, F. and Salamone, S., “Temperature Effects in Ultrasonic Lamb-wave Structural Health Monitoring Systems,” Journal of the Acoustical Society of America, 124(1), pp. 161-174, 2008.

59. Salamone, S., Bartoli, I., Lanza di Scalea, F., and Coccia, S., “Temperature Effects on Guided Wave Based Macro-fiber Composite Transduction,” Materials Evaluation, 66(10), pp. 1071-1076, 2008 (ASNT Research Fellowship Award paper).

60. Bartoli, I., Salamone, S., Phillips, R., Lanza di Scalea, F., Coccia, S., and Sikorsky, C., “Monitoring Prestress Level in Seven-wire Prestressing Tendons by Inter-wire Ultrasonic Wave Propagation,” Journal of Advances in Science and Technology – Embodying Intelligence in Structures and Integrated Systems, 56, pp. 200-205, 2008.

61. Marzani, A., Viola, E., Bartoli, I., Lanza di Scalea, F., and Rizzo, P., “A Semi-analytical Finite Element Formulation for Modeling Stress Wave Propagation in Axisymmetric Damped Waveguides” Journal of Sound and Vibration, 318(3), pp. 488-505, 2008.

62. Sabra, K., Srivastava, A., Lanza di Scalea, F., Bartoli, I., Rizzo, P., and Conti, S., “Structural Health Monitoring by Extraction of Coherent Guided Waves from Diffuse Fields,” Journal of the Acoustical Society of America, 123(1), pp. EL8-EL13, 2008.

63. Rizzo, P., Sorrivi, E., Lanza di Scalea, F., and Viola, E., “Wavelet-based Outlier Analysis for Guided Wave Structural Monitoring: Application to Multi-wire Strands,” Journal of Sound and Vibration, 307(1-2), pp. 52-68, 2007.

64. Matt, H. and Lanza di Scalea, F., “Macro-fiber Composite Piezoelectric Rosettes for Acoustic Source Location in Complex Structures,” Smart Materials and Structures, 16(4), pp. 1489-1499, 2007.

65. Lanza di Scalea, F., Matt, H. and Bartoli, I., “The Response of Rectangular Piezoelectric Sensors to Rayleigh and Lamb Ultrasonic Waves,” Journal of the Acoustical Society of America, 121(1), pp. 175-187, 2007.

5

66. Lanza di Scalea, F., Matt, H., Bartoli, I., Coccia, S., Park, G. and Farrar, C., “Health Monitoring of UAV Wing Skin-to-spar Joints Using Guided Waves and Macro Fiber Composite Transducers,” Journal of Intelligent Material Systems and Structures, 18(4), pp. 373-388, 2007.

67. Park, G., Farrar, C., Lanza di Scalea, F., and Coccia, S., “Performance Assessment and Validation of Piezoelectric Active-Sensors in Structural Health Monitoring,” Smart Materials and Structures, 15, pp. 1673-1683, 2006.

68. Bartoli, I., Marzani, A., Lanza di Scalea, F., and Viola, E., “Modeling Wave Propagation in Damped Waveguides of Arbitrary Cross-section,” Journal of Sound and Vibration, 295(3-5), pp. 685-707, 2006.

69. Lanza di Scalea, F., Rizzo, P., Coccia, S., Bartoli, I. and Fateh, M., “Laser/air-coupled Hybrid Non-contact System for Defect Detection in Rail Tracks: Status of FRA Prototype Development at UC San Diego,” Journal of the Transportation Research Board, Transportation Research Record no. 1943, pp. 57-64, 2006.

70. Rizzo, P. and Lanza di Scalea, F., “Feature Extraction for Defect Detection in Strands by Guided Ultrasonic Waves,” Journal of Structural Health Monitoring, 5(3), pp. 297-308, 2006.

71. Rizzo, P. and Lanza di Scalea, F., “Wavelet-based Feature Extraction for Automated Defect Classification in Strands by Ultrasonic Structural Monitoring,” Smart Structures and Systems, 2(3), pp. 253-274, 2006.

72. Matta, F., Rizzo, P., Karbhari, V., and Lanza di Scalea, F., “Acoustic Emission Damage Assessment of Steel/CFRP Adhesive Bonds for Rehabilitation,” ASCE Journal of Composites for Construction, 10(3), pp. 265-274, 2006.

73. Lanza di Scalea, F., Bartoli, I., Rizzo, P. and Fateh, M., “High-speed Defect Detection in Rails by Non-contact Guided Ultrasonic Testing,” Journal of the Transportation Research Board, Transportation Research Record no. 1916, pp. 66-77, 2005.

74. Matt, H., Bartoli, I., and Lanza di Scalea, F., “Ultrasonic Guided Wave Monitoring of Composite Wing Skin-to-spar Bonded Joints in Aerospace Structures,” Journal of the Acoustical Society of America, 118(4), pp. 2240-2252, 2005.

75. Rizzo, P., Lanza di Scalea, F., Banerjee, S. and Mal, A., “Ultrasonic Characterization and Inspection of Open Cell Foams,” ASCE Journal of Engineering Mechanics, 131(11), pp. 1200-1208, 2005.

76. Rizzo, P., Bartoli, I., Marzani, A. and Lanza di Scalea, F., “Defect Classification in Pipes by Neural Networks Using Multiple Guided Ultrasonic Wave Features Extracted After Wavelet Processing,” ASME Journal of Pressure Vessel Technology, Special Issue on NDE of Pipeline Structures, 127(3), pp. 294-303, 2005. (invited)

77. Bartoli, I., Lanza di Scalea, F., Fateh, M. and Viola, E., “Modeling Guided Wave Propagation with Application to the Long-range Defect Detection in Railroad Tracks,” Nondestructive Testing & Evaluation (NDT & E) International, 38(5), pp. 325-334, 2005.

78. Lanza di Scalea, F., Rizzo, P., Coccia, S., Bartoli, I., Fateh, M., Viola, E. and Pascale, G., “Non-contact Ultrasonic Inspection of Rails and Signal Processing for Automatic Defect Detection and Classification,” Insight - Non-destructive Testing and Condition Monitoring, EURO Issue on NDT in the Rail Industry, 47(6), pp. 346-353, 2005. (invited)

79. Rizzo, P. and Lanza di Scalea, F., “Ultrasonic Inspection of Multi-wire Steel Strands with the Aid of the Wavelet Transform,” Smart Materials and Structures, 14(4), pp. 685-695, 2005.

80. Lanza di Scalea, F., Rizzo, P. and Marzani, A., "Propagation of Ultrasonic Guided Waves in Lap-shear Adhesive Joints: Case of Incident A0 Lamb Mode," Journal of the Acoustical Society of America, 115(1), pp. 146-156, 2004.

81. McNamara, J. and Lanza di Scalea, F., “Improvements in Non-contact Ultrasonic Testing of Rails by the Discrete Wavelet Transform,” Materials Evaluation, 62(3), pp. 365-372, 2004.

82. Lanza di Scalea, F. and McNamara, J., “Wavelet Transform for Characterizing Longitudinal and Lateral Transient Vibrations of Railroad Tracks,” Research in Nondestructive Evaluation, 15(2), pp. 87-98, 2004.

83. Rizzo, P. and Lanza di Scalea, F., “Wave Propagation in Multi-wire Strands by Wavelet-based Laser Ultrasound,” Experimental Mechanics, 44(4), pp. 407-415, 2004.

6

84. McNamara, J., Lanza di Scalea, F. and Fateh, M. “Automatic Defect Classification in Long-range Ultrasonic Rail Inspection Using a Support Vector Machine-based Smart System,” Insight - Non-destructive Testing and Condition Monitoring, EURO Issue on NDT in the Rail Industry, 46(6), pp. 331-337, 2004. (invited)

85. Lanza di Scalea, F., Rizzo, P. and Marzani, A., “Assessment of Bond State in Lap-shear Joints by Guided Wave Transmission Measurements,” Insight - Non-destructive Testing and Condition Monitoring, EURO Issue on NDT in the Aerospace Industry, 46(3), pp. 135-141, 2004. (invited)

86. Rizzo, P. and Lanza di Scalea, F., “Load Measurement and Health Monitoring in Cable Stays via Guided Wave Magnetostrictive Ultrasonics,” Materials Evaluation, 62(10), pp. 1057-1065, 2004.

87. Lanza di Scalea, F. and McNamara, J., “Measuring High-frequency Waves Propagating in Railroad Tracks by Joint Time-Frequency Analysis,” Journal of Sound and Vibration, 273(3), pp. 637-651, 2004.

88. Lanza di Scalea, F., Rizzo, P. and Seible, F., “Stress Measurement and Defect Detection in Steel Strands by Guided Stress Waves,” ASCE Journal of Materials in Civil Engineering, Special Issue on NDE/Health Monitoring, 15(3), pp. 219-227, 2003.

89. Lanza di Scalea, F. and McNamara, J., "Ultrasonic NDE of Railroad Tracks: Air-coupled Cross-sectional Inspection and Long-range Inspection," Insight - Non-destructive Testing and Condition Monitoring, EURO Issue on NDT in the Rail Industry, 45(6), pp. 394-401, 2003. (invited)

90. Rizzo, P. and Lanza di Scalea, F., “Effect of Frequency on the Acousto-elastic Response of Steel Bars,” Experimental Techniques, 27(6), pp. 40-43, 2003.

91. McNamara, J. and Lanza di Scalea, F., “Air-coupled Ultrasonic Testing of Railroad Rails,” Materials Evaluation, 60(12), pp. 1431-1437, 2002.

92. Rizzo, P. and Lanza di Scalea, F., “Acoustic Emission Monitoring of CFRP Bridge Stay Cables in Large-scale Testing,” Experimental Mechanics, 41(3), pp. 282-290, 2001.

93. Tuzzeo, D. and Lanza di Scalea, F., “Non-contact Air-coupled Ultrasonic Guided Waves for Detection of Thinning Defects in Aluminum Plates,” Research in Nondestructive Evaluation, 13(2), pp. 61-78, 2001.

94. Lanza di Scalea, F., Bonomo, M. and Tuzzeo, D., “Ultrasonic Guided Wave Inspection of Bonded Lap Joints: Noncontact Method and Photoelastic Visualization,” Research in Nondestructive Evaluation, 13(3), pp. 153-171, 2001.

95. Lanza di Scalea, F., Spicer, J.B. and Green, R.E., Jr., “Electronic Shearography with Thermal Loading for Detecting Debonds in Thick Polyurethane/Steel Panels for Marine Applications,” Research in Nondestructive Evaluation, 12(1), pp. 43-51, 2000.

96. Lanza di Scalea, F. and Green, R.E., Jr., “A Hybrid Non-contact Ultrasonic System for Sensing Bond Quality in Tow-placed Thermoplastic Composites,” Journal of Composite Materials, 34(21), pp. 1860-1880, 2000.

97. Lanza di Scalea, F., “Advances in Non-contact Ultrasonic Inspection of Railroad Tracks,” Experimental Techniques, 24(5), pp. 23-26, 2000.

98. Lanza di Scalea, F., Rizzo, P., Karbhari, V.M. and Seible, F., “Health Monitoring of I5/Gilman Advanced Technology Bridge,” Smart Materials Bulletin, 1(2), pp. 6-10, 2000.

99. Lanza di Scalea, F., Cappello, F. and Cloud, G.L., “On the Elastic Behavior of a Cross-Ply Composite Pin-Joint with Clearance Fits,” Journal of Thermoplastic Composite Materials, 12(1), pp. 13-22, 1999.

100. Lanza di Scalea, F., Cappello, F. and Cloud, G.L., “On the Effect of Interference Fits in Composite Pin-Joints,” Journal of Thermoplastic Composite Materials, 12(1), pp. 23-32, 1999.

101. Lanza di Scalea, F. and Green, R.E., Jr., “Experimental Observation of the Intrusive Effect of a Contact Transducer on Ultrasound Propagation,” Ultrasonics, 37(3), pp. 179-183, 1999.

102. Lanza di Scalea, F. and Green, R.E., Jr., “High-sensitivity Laser-based Ultrasonic C-scan System for Materials Inspection,” Experimental Mechanics, 39(4), pp. 329-334, 1999.

103. Lanza di Scalea, F., Berndt, T.P., Spicer, J.B. and Djordjevic, B.B., “Remote Laser Generation of Narrow-band Surface Waves Through Optical Fibers,” IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 46(6), pp. 1551-1557, 1999.

104. Lanza di Scalea, F., “Strain in Isotropic Pin-Joints: Experimental and Numerical Analysis,”

7

Experimental Techniques, 22(4), pp. 25-28, 1998. 105. Lanza di Scalea, F., Soonsung, H. and Cloud, G.L., “Whole-Field Strain Measurements in Pin-

Loaded Plate by Electronic Speckle Pattern Interferometry and the Finite Element Method,” Experimental Mechanics, 38(1), pp. 55-60, 1998.

106. Lanza di Scalea, F., “Measurement of Thermal Expansion Coefficients of Composites using Strain Gages,” Experimental Mechanics, 38(4), pp. 233-241, 1998.

107. Lanza di Scalea, F., “Compensation of Thermal Output of Strain Gages on Orthotropic Materials: Case of One Compensating Gage for Multiple Active Ones,” Experimental Techniques, 22(6), pp. 30-34, 1998.

108. Lanza di Scalea, F., Cappello, F. and Cloud, G.L., “A Study on the Effects of Clearance and Interference Fits in a Pin-Loaded Cross-Ply FGRP Laminate,” Journal of Composite Materials, 32(8), pp. 783-803, 1998.

Research Technical Reports 1. Capriotti, M., Kim, H.E., Lanza di Scalea, F. and Kim, H., “Non-Destructive Evaluation Methods

for Detecting Major Damage in Internal Composite Structural Components,” Technical Report to the Federal Aviation Administration (FAA) for FAA Cooperative Agreement 12-C-AM-UCSD- amendment 10, DOT/FAA/AR-xx/xx, August 2017 (43 pages).

2. Coccia, S., Phillips, R., Bartoli, I., Salamone, S., Rizzo, P., Lanza di Scalea, F., “On-line High-speed Rail Defect Detection – Part II,” Federal Railroad Administration Technical Report DOT/FRA/ORD-12/02, March 2012 (140 pages).

3. Todd, M., Lanza di Scalea, F., Srivastava, A., Fasel, T., and Bartoli, I., “In-situ Adhesive Bond Assessment for Aerospace Structures,” Technical Report no. FA9550-07-1-0016 to the US Air Force Office of Scientific Research, University of California, San Diego, 2010 (97 pages).

4. Todd, M. and Lanza di Scalea, F., “Proof-of-concept Studies in Novel Guided Wave Methods for Metallic Structural Condition Assessment,” Final Report N00014-08-1-0973 to the Office of Naval Research, University of California San Diego (39 pages), 2009.

5. Bartoli, I., Salamone, S., Phillips, R., Nucera, C., and Lanza di Scalea, F., “Health Monitoring to Detect Failure of Prestressing (PS) Cables in Segmental Box-girder Bridges,” Technical Report No. CA-090938 to the California Department of Transportation, University of California, San Diego, 2009 (131 pages).

6. Lanza di Scalea, F., Bartoli, I., Coccia, S., Salamone, S., and Phillips, R., “Automated Measurement of Stress in Continuous Welded Rail (CWR),” Letter Report to the Federal Railroad Administration, University of California, San Diego, 2009 (22 pages).

7. Coccia, S., Bartoli, I., Phillips, R., Salamone, S. and Lanza di Scalea, F., “Noncontact Rail Defect Detection: Fourth Field Test,” Technical Report No. SSRP-09/04 to the Federal Railroad Administration, University of California, San Diego, 2009 (22 pages).

8. Nucera, C., Bartoli, I., Salamone, S., Phillips, R., and Lanza di Scalea, F., “Nonlinear Ultrasonics for Health Monitoring of Prestressing Tendons,” Letter Report to the California Department of Transportation, University of California, San Diego, 2008.

9. Coccia, S., Bartoli, I., Salamone, S. and Lanza di Scalea, F., “Report of Third Field Test of UCSD/FRA Rail Defect Detection Prototype, Gettysburg, PA, March 17-21, 2008,” Technical Report No. SSRP-08/02 to the Federal Railroad Administration, University of California, San Diego, 2008 (80 pages).

10. Coccia, S., Bartoli, I., Lanza di Scalea, F. and Rizzo, P., “Non-contact Rail Defect Detection: First and Second Field Tests,” Technical Report No. SSRP-07/15 to the Federal Railroad Administration, University of California, San Diego, 2007.

11. Bartoli, I., Sorrivi, E., Lanza di Scalea, F., and Phillips, R., “Health Monitoring of Prestressing Cables: Literature Review and Wave Propagation Results,” Technical Report No. SSRP-07/14 to the California Department of Transportation, University of California, San Diego, 2007.

12. Bartoli, I. and Lanza di Scalea, F., “Health Monitoring of Prestressing Cables: Literature Review and Initial Results,” Technical Report No. SSRP-06/24 to the California Department of Transportation, University of California, San Diego, 2006.

8

13. Rizzo, P., Coccia, S., Bartoli, I. and Lanza di Scalea, F., “On-line High-speed Rail Defect Detection – Phase IV: Prototype Assembling and Field Testing,” Technical Report No. SSRP-06/17 to the Federal Railroad Administration,, University of California, San Diego, 2006.

14. Rizzo, P., Coccia, S. and Lanza di Scalea, F., “On-line High-speed Rail Defect Detection – Phase III,” Technical Report No. SSRP-05/04 to the Federal Railroad Administration, University of California, San Diego, 2005.

15. Lanza di Scalea, F., Bartoli, I., Rizzo, P. and McNamara, J., “On-line High-speed Rail Defect Detection,” Technical Report DOT/FRA/ORD-04/16, Department of Transportation/Federal Railroad Administration, 2004.

16. Robinson, J. and Lanza di Scalea, F., “Bond Quality Assessment in Aerospace Components by Ultrasonic Non-destructive Testing,” Technical Report No. SSRP-2002/10, University of California, San Diego, 2002.

17. Rizzo, P., Lanza di Scalea, F., Karbhari, V.M. and Seible, F., “Acoustic Emission Monitoring of CFRP Stay Cables During Proof Testing,” Technical Report No. SSRP-2001/03, University of California, San Diego, 2001.

Refereed Conference Proceedings 1. Sternini, S., Quattrocchi, A., Montanini, R., Pau, A. and Lanza di Scalea, F., “A match coefficient

approach for damage imaging in structural components by ultrasonic synthetic aperture focus,” CD-ROM Proceedings of the Xth International Conference on Structural Dynamics, EURODYN 2017, Elsevier, Procedia Engineering, F. Vestroni, F. Romeo and V. Gattulli, eds., vol. 199, pp. 1-6, 2017.

2. Capriotti, M. , Kim, H. E., Lanza di Scalea, F., and Kim, H., “Detection of major impact damage to composite aerospace structures by ultrasonic guided waves and statistical signal processing,” CD-ROM Proceedings of the Xth International Conference on Structural Dynamics, EURODYN 2017, Elsevier, Procedia Engineering, F. Vestroni, F. Romeo and V. Gattulli, eds., vol. 199, pp. 1-6, 2017.

3. Mariani, S., Nguyen, T., Zhu, X., Sternini, S., Lanza di Scalea, F., and Fateh, M. and Wilson, R., “Non-contact ultrasonic guided wave inspection of rails: next generation approach,” Proceedings of the 2016 ASME Joint Rail Conference (JRC), Columbia, SC, April 12-15, 2016.

4. Zhu, X., Lanza di Scalea, F., and Fateh, M., “Thermal stress measurement in continuous welded rails using the hole-drilling method,” Proceedings of the 2016 ASME Joint Rail Conference (JRC), Columbia, SC, April 12-15, 2016.

5. Nguyen, T., Sternini, S., and Lanza di Scalea, F., “3D Ultrasonic Imaging Applications on Rails,” Proceedings of the 2016 ASME Joint Rail Conference (JRC), Columbia, SC, April 12-15, 2016.

6. Nguyen, T., Sternini, S. and Lanza di Scalea, F., “Advances in Ultrasonic Defect Detection and Imaging in Structures,” Proceedings CIMTEC 2016 – Symposium P, Perugia, Italy, June 2016.

7. Pau, A. and Lanza di Scalea, F., “Non-Destructive Evaluation of Prestress In Plates By Nonlinear Guided Waves,” Proceedings of the 9th International Conference on Structural Dynamics, EURODYN 2014, A. Cunha, E. Caetano, P. Ribeiro, G. Muller (eds.), Porto, Portugal, June 30-July 2, 2014.

8. Mariani, S., Nguyen, T., Lanza di Scalea, F. and Fateh, M., “High speed Non-contact Ultrasonic Guided Wave Inspections of Rails,” CD-ROM Proceedings of the 2014 ASME Joint Rail Conference, Colorado Springs, CO, pp. 1-6, April 2-4, 2014.

9. Phillips, R., Lanza di Scalea, F., Nucera, C., Rizzo, P., Al-Nazer, L., “Ultrasonic Tomography for Rail Flaw Imaging,” CD-ROM Proceedings of the 2014 ASME Joint Rail Conference, Colorado Springs, CO, pp. 1-10, April 2-4, 2014.

10. Phillips, R., Lanza di Scalea, F., Nucera, C., Fateh, M., and Choros, J., “Field Testing of Prototype Systems for the Non-destructive Measurement of the Neutral Temperature of Railroad Tracks,” CD-ROM Proceedings of the 2014 ASME Joint Rail Conference, Colorado Springs, CO, pp. 1-10, April 2-4, 2014.

11. Nucera, C. and Lanza di Scalea, F., “Modeling of Nonlinear Guided Waves And Applications To Structural Health Monitoring,” Computing in Civil Engineering, Proceedings of the 2013 ASCE

9

International Workshop on Computing in Civil Engineering (IWCCE), University of Southern California, Los Angeles, pp. 105-112, June 23-25, 2013.

12. Lanza di Scalea, F., Rizzo, P., Salamone, S., Bartoli, I. and Al-Nazer, L., “Ultrasonic Tomography for Three-Dimensional Imaging of Internal Rail Flaws: Proof-of-principle Numerical Simulations,” CD-ROM Proceedings of the 92th Annual Meeting of the Transportation Research Board, Washington DC, January 2013.

13. Nucera, C., Phillips, R., Lanza di Scalea, F., Fateh, M., and Carr, G., “RAIL-NT System for the In-situ Measurement of Neutral Temperature in CWR: Results from Laboratory and Field Tests,” CD-ROM Proceedings of the 92th Annual Meeting of the Transportation Research Board, Washington DC, January 2013.

14. Nguyen, T, Mariani, S., Phillips, R., Kijianka, P., Lanza di Scalea, F., and Staszewski, WJ, “Noncontact Ultrasonic Guided Wave Inspections Of Rails,” Proceedings of the 2013 ASME International Mechanical Engineering Congress and Exposition (IMECE 2013), pp. 1-9, San Diego, CA, November 15-21, 2013.

15. Manohar, A. and Lanza di Scalea, F., “Modeling Heat Flow Interaction With Defects In Composite Materials Using Virtual Heat Sources In Pulsed Thermography,” Proceedings of the 2013 ASME International Mechanical Engineering Congress and Exposition (IMECE 2013), San Diego, CA, November 15-21, 2013.

16. Nucera, C. and Lanza di Scalea, F., “Nonlinearity In Ultrasonic Guided Waves Propagating In Solids Under Constrained Thermal Expansion,” Proceedings of the 2013 ASME International Mechanical Engineering Congress and Exposition (IMECE 2013), pp. 1-8, San Diego, CA, November 15-21, 2013.

17. Tippmann J. and Lanza di Scalea, F., “Structural Health Monitoring Of Composite Wind Turbine Blades Using Coherent Guided Waves From Diffuse Fields,” Proceedings of the 2013 ASME International Mechanical Engineering Congress and Exposition (IMECE 2013), San Diego, CA, November 15-21, 2013.

18. Nucera, C., Phillips, R., Lanza di Scalea, F., Fateh, M., and Carr, G., “A Wayside System For In-Situ Measurement Of Rail Neutral Temperature By Nonlinear Ultrasonic Guided Waves,” Proceedings of the ASME 2012 RTD Fall Conference (RTDF 2012), Omaha, Nebraska, October 16-18, pp. 1-7, 2012.

19. Bazilevs, Y., Marsden, A.L., Lanza di Scalea, F., Majumdar, A., and Tatineni, M., “Toward A Computational Steering Framework For Large-Scale Composite Structures Based On Continually And Dynamically Injected Sensor Data,” Procedia Computer Science, International Conference on Computational Science (ICCS 2012), vol. 9, pp. 1149-1158, 2012.

20. Nucera, C., Phillips, R., Coccia, S., Lanza di Scalea, F., Fateh, M. and Carr, G., “A Wayside System Based on Ultrasonic Guided Waves For the Measurement of Neutral Temperature In CWR,” Proceedings of American Railway Engineering and Maintenance-of-Way Association (AREMA) Annual Conference, Chicago, IL, Sept 16-19, 2012.

21. Nucera, C., Phillips, R., Coccia, S., Lanza di Scalea, F., Fateh, M. and Carr, G., “Measurement of NT in CWR by Ultrasonic Guided Waves,” Proceedings of American Railway Engineering and Maintenance-of-Way Association (AREMA) Annual Conference, Minneapolis, MN, September 18-21, 2011.

22. Lanza di Scalea, F., Srivastava, A., Nucera, C., Bartoli, I., and Phillips, R., “Non-Linear Higher-Harmonic Generation Of Ultrasonic Guided Waves and Applications To Structural Diagnosis” Proceedings of the 7th European Nonlinear Dynamics Conference (ENOC 2011), Rome, Italy, July 24-29, 2011.

23. Phillips, R., Bartoli, I., Coccia, S., Lanza di Scalea, F., Salamone, S., Nucera, C., Fateh, M., and Carr, G., “Nonlinear Guided Waves in Continuous Welded Rails for Buckling Prediction,” Review of Progress in Quantitative Nondestructive Evaluation (QNDE), Vol. 30, San Diego, CA, July 18-23, pp. 314-321, 2011.

24. Coccia, S., Phillips, R., Nucera, C., Bartoli, I., Salamone, S., Lanza di Scalea, F., Fateh, M. and Carr, G., “Ultrasonic Guided-wave Defect Detection System for Rails,” Proceedings of American Railway Engineering and Maintenance-of-Way Association (AREMA) Annual Conference,

10

Minneapolis, MN, September 18-21, 2011. 25. Lanza di Scalea, F., Salamone, S., Bartoli, I., Kim, H., and Rhymer, J., “Location and

Identification of Impact Forces in Composite Aerospace Panels,” Proceedings of the 40th National Conference of the Italian Association for Stress Analysis (AIAS), Palermo, Italy, September 7-10, 2011.

26. Coccia, S., Phillips, R., Bartoli, I., Salamone, S., Lanza di Scalea, F., Fateh, M., and Carr, G., “UCSD/FRA Non-contact Ultrasonic Guided Wave System for Rail Inspection: An Update,” CD-ROM Proceedings of the 90th Annual Meeting of the Transportation Research Board, Washington, DC, January 2011.

27. Salamone, S., Bartoli, I., Phillips, R., Nucera, C., and Lanza di Scalea, F., “Health Monitoring of Prestressing Tendons in Post-Tensioned Concrete Bridges,” CD-ROM Proceedings of the 90th Annual Meeting of the Transportation Research Board, Washington, DC, January 2011.

28. Bartoli, I., Salamone, S., Lanza di Scalea, F., Rhymer, J. and Kim, H., “Impact Force Identification on Aerospace Panels,” Proceedings of the ASME International Mechanical Engineering Congress, Vancouver, Canada, November 12-18, 2010.

29. Salamone, S., Bartoli, I., Phillips, R., Nucera, C., Lanza di Scalea, F., Sikorsky, C. and Tamutus, T., “Health Monitoring of Prestressing Tendons in Post-tensioned Concrete Structures,” CD-ROM Proceedings of the ASNT Conference on NDE/NDT for Highways and Bridges: Structural Materials Technology, New York, NY, pp. 401-408, August 16-20, 2010.

30. Nucera, C., Salamone, S., Bartoli, I., Phillips, R., Lanza di Scalea, F. and Sikorsky, C., “Nonlinear Ultrasonic Guided Waves for Stress Monitoring in Prestressing Tendons for Post-tensioned Concrete Structures,” CD-ROM Proceedings of the ASNT Conference on NDE/NDT for Highways and Bridges: Structural Materials Technology, New York, NY, pp. 409-417, August 16-20, 2010.

31. Bartoli, I., Phillips, R., Coccia, S., Srivastava, A., Lanza di Scalea, F., Fateh, M. and Carr, G., “Stress Dependence of Ultrasonic Guided Waves in Rails,” CD-ROM Proceedings of the 89th Annual Meeting of the Transportation Research Board, Washington, DC, January 2010.

32. Coccia, S., Bartoli, I., Phillips, R., Salamone, S., Lanza di Scalea, F., Fateh, M., and Carr, G., “UCSD/FRA Ultrasonic guided-Wave System for Rail Inspection,” Proceedings of the American Railway Engineering and Maintenance-of-Way Association (AREMA) Annual Conference, Chicago, IL, September 20-23, 2009.

33. Coccia, S., Salamone, S., Phillips, R., Lanza di Scalea, F., and Fateh, M., “Non-contact Ultrasonic Guided Wave Detection of Rail Defects,” CD-ROM Proceedings of the 88th Annual Meeting of the Transportation Research Board, Washington, DC, January 11-15, 2009.

34. Marzani, A., Bocchini, P, Viola, I., Coccia, S., Salamone, S. and Lanza di Scalea, F., “A Software for the Computation of Acoustic Waves in Cylindrical, Plate and Arbitrary Cross-sections,” Proceedings of the AIPND Italian Congress, Rome, October 15-17, 2009.

35. Bartoli, I., Rizzo, P., Lanza di Scalea, F., Marzani, A., Sorrivi, E., and Viola, E., “Structural Health Monitoring of Strands in P/C Structures by Embedded Sensors and Ultrasonic Guided Waves,” Fracture Mechanics of Concrete and Concrete Structures Conference (Framcos), Carpinteri et al, eds., Catania, Italy, pp. 1029-1036, 2007.

36. Coccia, S., Bartoli, I., Lanza di Scalea, F., Rizzo, P., Fateh, M., and Yang, T-L., “Non-contact Ultrasonic Rail Flaw Detection,” session on “Transformative Applications of Smart Sensors Technology in Structural Health Monitoring,” Proceedings of World Forum on Smart Materials and Smart Structures Technologies (SMSST07), Chongqing and Nanjing, China, May 22-27, 2007. (invited)

37. Lanza di Scalea, F., Bartoli, I., Rizzo, P. and Fateh, M., “High-speed Defect Detection in Rails by Non-contact Guided Ultrasonic Testing,” CD-ROM Proceedings of the 84th Annual Meeting of the Transportation Research Board, Washington, DC, 2005.

38. Trivedi, A., Krysl, P., McNamara, J. and Lanza di Scalea, F., “Adaptive Simulation of Ultrasound Guided Waves in Railroad Tracks Using CHARMS,” CD-ROM Proceedings of the 6th World Congress on Computational Mechanics, Beijing, China, 2004.

39. Seible, F., Cicerone, S., Hose, Y., Brestel, D. and Lanza di Scalea, F., “The I-5/Gilman

11

Advanced Technology Cable Stayed Bridge,” IASS (International Association for Shell and Spatial Structures) International Symposium on Lightweight Structures in Civil Engineering, Warsaw, Poland, pp. 735-748, 2002.

40. Lanza di Scalea, F. and Green, R.E., Jr., “Advances in Non-contact Ultrasonic Systems for Materials Inspection,” Proceedings of the American Society of Mechanical Engineers 6th NDE Topical Conference, San Antonio, TX, ASME NDE-vol. 19, pp. 113-118, 1999.

41. Lanza di Scalea, F., Berndt, T.P., Djordjevic, B.B. and Green, R.E., Jr., "Advances in Optical Methods for Non-contact Nondestructive Evaluation," Proceedings of the 9th International Symposium on Nondestructive Characterization of Materials, Sydney, Australia, Nondestructive Characterization of Materials IX, R.E. Green, Jr., ed., pp. 149-155, 1999.

42. Cloud, G.L. and Lanza di Scalea, F., “Stress near Interference-Fit Composite Fasteners by Speckle Interferometry,” Post-Conference Proceedings of the 1997 Society for Experimental Mechanics (SEM) Spring Conference on Experimental Mechanics, pp. 39-45,1998.

43. Cloud, G.L. and Lanza di Scalea, F., “Strain Measurement by Digital Speckle Pattern Interferometry,” Post-Conference Proceedings of the 1997 Society for Experimental Mechanics (SEM) Spring Conference on Experimental Mechanics, pp.151-157, 1998.

44. Lanza di Scalea, F., Soonsung, H. and Cloud, G.L., “ESPI and FEM Analysis of Strain Field in Pin-Loaded Plate,” Proceedings of the 11th International Conference on Experimental Mechanics, Oxford, United Kingdom, pp. 703-708, 1998.

Other Conference Proceedings 45. Sternini, S., Nguyen, T., and Lanza di Scalea, F., “Ultrasonic tomography in solids using

adaptive beamforming,” CD-ROM Proceedings of SEM International Modal Analysis Conference (IMAC-XXXV), Society for Experimental Mechanics, Garden Grove, CA, January 30-February 2, 2017.

46. Capriotti, M., Sternini, S., and Lanza di Scalea, F., “Passive defect detection and imaging in structures by cross-correlations of infrared thermography measurements,” CD-ROM Proceedings of SEM International Modal Analysis Conference (IMAC-XXXV), Society for Experimental Mechanics, Garden Grove, CA, January 30-February 2, 2017.

47. Capriotti, M., Kim, H., Lanza di Scalea, F., and Kim, H., “Ultrasonic Nondestructive Inspection of Wide Area Impact Damage in Composite Aircraft Structures,” CD-ROM Proceedings of SEM International Modal Analysis Conference (IMAC-XXXV), Society for Experimental Mechanics, Garden Grove, CA, January 30-February 2, 2017.

48. Zhu, X. and Lanza di Scalea, F., “In-situ thermal stress estimation in structures using the electro-mechanical impedance method,” CD-ROM Proceedings of SEM International Modal Analysis Conference (IMAC-XXXV), Society for Experimental Mechanics, Garden Grove, CA, January 30-February 2, 2017.

49. Sternini, S., Liang, A., and Lanza di Scalea, F., “Ultrasonic Imaging of Structural Defects by Improved Synthetic Aperture Focus Techniques,” 2017 Conference and Exposition on Experimental and Applied Mechanics, Society for Experimental Mechanics, Indianapolis, ID, June 10-15, 2017.

50. Nucera, C., and Lanza di Scalea, F., “In-Situ Characterization of Thermal Stresses In Materials and Structures by Nonlinear Wave Propagation,” 2017 Conference and Exposition on Experimental and Applied Mechanics, Society for Experimental Mechanics, Indianapolis, ID, June 10-15, 2017.

51. Capriotti, M., Sternini, S., and Lanza di Scalea, F., “Passive Infrared Thermography for Defect Detection and Imaging in Structures by Correlation of Diffuse Thermal Fields,” 2017 Conference and Exposition on Experimental and Applied Mechanics, Society for Experimental Mechanics, Indianapolis, ID, June 10-15, 2017.

52. Liang, A., Capriotti, M., Sternini, S., Zhu, X., and Lanza di Scalea, F., “Passive-Only Extraction Of Acoustic Impulse Response By Deconvolutions Of Non-Stationary Excitations: Application To High-Speed Non-Contact Structural Inspection Of Railroad Tracks From Wheel-Generated

12

Excitations,” Abstract for Experimental Vibration Analysis for Civil Engineering Structures (EVACES2017), San Diego, CA, July 12-14, 2017.

53. Zhu, X., Lanza di Scalea, F. and Fateh, M., “Thermal stress characterization using the electromechanical impedance method,” Proceedings SPIE vol 10164, SPIE Smart Structures and NDE Conference, Portland, OR, 25-29 March, 2017.

54. Sternini, S., Quattrocchi, A., Montanini, R. and Lanza di Scalea, F., “Ultrasonic damage imaging of structural components with bulk and guided waves using match coefficients,” Proceedings SPIE vol 10170, SPIE Smart Structures and NDE Conference, Portland, OR, 25-29 March, 2017.

55. Capriotti, M., Kim, H., Lanza di Scalea, F., and Kim, H., “Development of an ultrasonic nondestructive Inspection method for impact damage detection in composite aircraft structures,” Proceedings SPIE vol 10169, SPIE Smart Structures and NDE Conference, Portland, OR, 25-29 March, 2017.

56. Lanza di Scalea F., “Damage location and identification in aerospace panels via piezoelectric rosettes,” CD-ROM Abstract Proceedings of the ASME IMECE International Mechanical Engineering Congress & Exposition, IMECE2016-66768, Phoenix, AZ, November 13-16, 2016.

57. Sternini, S., Nguyen T., and Lanza di Scalea, F., “Advances in damage imaging by ultrasonic synthetic aperture focusing,” CD-ROM Abstract Proceedings of the ASME IMECE International Mechanical Engineering Congress & Exposition, IMECE2016-66777, Phoenix, AZ, November 13-16, 2016.

58. Lanza di Scalea, F., Kim, H., Capriotti, M., Kim, H., and Mariani, S., “Detection of major internal damage in aerospace structures by ultrasonic guided waves,” CD-ROM Abstract Proceedings of the ASME IMECE International Mechanical Engineering Congress & Exposition, IMECE2016-66872Phoenix, AZ, November 13-16, 2016.

59. Mariani, S., Nguyen, T., Sternini, S., Lanza di Scalea, F., Fateh, M. and Wilson, R., “Defect detection performance of the UCSD non-contact air-coupled ultrasonic guided wave inspection of rails prototype,” Proceedings SPIE, Las Vegas, NV, March 2016.

60. Mariani, S., Nguyen, T., Sternini, S., Lanza di Scalea, F., Fateh, M. and Wilson, R., “Air-Coupled Ultrasonic Testing of Rails,” 25th ASNT Annual Research Symposium, New Orleans, LA April 11-14, 2016.

61. Sternini, S., Nguyen, T. and Lanza di Scalea, F., “Ultrasonic Imaging Using Global Matched Coefficients” Proceedings of 8th European Workshop on Structural Health Monitoring (EWSHM 2016), Bilbao, Spain, 5-8 July 2016.

62. Sternini, S., Nguyen, T. and Lanza di Scalea, F., “Ultrasonic imaging of structural defects using adaptive beamforming,” Proceedings of the ASME 2016 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS-2016, Stowe, VT, September 28-30, 2016.

63. Zhu, X., Lanza di Scalea, F. and Fateh, M., “On the study of the influences of temperature and axial load to the impedance-based structural health monitoring system,” 11th International Workshop on Advanced Materials and Smart Structures Technology, University of Illinois Urbana-Champaign, August 1-2, 2015.

64. Zhu, X., Lanza di Scalea, F. and Fateh, M., “On the study of the in-situ thermal stress measurement using a hole-drilling method,” 11th International Workshop on Advanced Materials and Smart Structures Technology, University of Illinois Urbana-Champaign, August 1-2, 2015.

65. Nguyen, T., Sternini, S. and Lanza di Scalea, F., “Advances in ultrasonic imaging of internal flaws in structures,” Proceedings of the 2015 Annual Conference of the Prognostics and Health Management Society, Coronado, CA, Oct 19-14, 2015.

66. Nguyen, T., Sternini, S. and Lanza di Scalea, F., “On Defect Imaging Using Ultrasonics for Structural Health Monitoring,” CD-ROM Proceedings of the 22nd International Congress on Sound and Vibration (ICSV22), Florence Italy. July 12-16, 2015.

67. Tippmann, J. and Lanza di Scalea, F., “Applications of Matched Field Processing to Damage Detection in Composite Wind Turbine Blades,” Health Monitoring of Structural and Biological Systems IX (SPIE Vol 9438), T. Kundu, ed., part of SPIE Smart Structures/NDE Symposium, San Diego, CA, pp. 94380H1-94380H7, March 8-12, 2015.

13

68. Mariani, S., Nguyen, T., Zhu, P., Lanza di Scalea, F. and Fateh, M., “Non-contact Ultrasonic Guided Wave Inspection of Rails: Field Test Results and Update,” Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Systems (SPIE Vol 9435), J.P. Lynch, C-B. Yun, K-W. Wang, eds., part of SPIE Smart Structures/NDE Symposium, San Diego, CA, pp. 86921L1-86921L12, March 8-12, 2015.

69. Kim, H., Lanza di Scalea, F., Kim, E.H., Capriotti, M. and Nguyen, T., “Non-Destructive Evaluation Methods for Detecting Major Damage in Internal Composite Structural Components,” FAA Joint Advanced Materials and Structures 2015 Technical Review Meeting, Baltimore, MD, March 31 - April 1, 2015.

70. Kijanka, P., Packo, P., Zhu, X., Staszewski, W. and Lanza di Scalea, F., “Three-Dimensional Temperature Effect Modelling of Piezoceramic Transducers Used for Structural Health Monitoring,” Proceedings of 5th Asia-Pacific Workshop on Structural Health Monitoring (AWPSHM 2014), Shenzhen, China, December 4-5, 2014.

71. Tippmann, J. and Lanza di Scalea, F., “Structural Health Monitoring of Composite Wind Turbine Blades Using Diffuse Ultrasonic Fields and Reciprocity,” Proceedings of the American Society for Composites 29th Technical Conference and 16th US-Japan Conference on Composite Materials, San Diego, CA, Sept 8-10, pp. 1-11, 2014.

72. Kijanka, P., Manohar, A., Lanza di Scalea, F. and Staszewski, W., “Damage Location By Ultrasonic Lamb Waves And Piezoelectric Rosettes,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE Annual International Symposium - Health Monitoring of Structural and Biological Systems, T. Kundu, ed., San Diego, CA, March 9-13, Vol. 9064, pp. 9064221 – 90642213, 2014.

73. Zhu, P., Lanza di Scalea, F. and Fateh, M., “Temperature And Axial Stress Effects In Electro-Mechanical Impedance Method-Based Structural Health Monitoring,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE Annual International Symposium - Health Monitoring of Structural and Biological Systems, T. Kundu, ed., San Diego, CA, March 9-13, Vol. 9064, pp 90641O1-90641O12, 2014.

74. Phillips, R., Lanza di Scalea, F., Nucera, C., Fateh, M., and Choros, J., “Field Testing Of Prototype Systems For The Non-Destructive Measurement Of The Neutral Temperature Of Railroad Tracks,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE Annual International Symposium - Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, J. P. Lynch, K-W. Wang, H. Sohn, eds., San Diego, CA, March 9-13, Vol. 9061, pp. 90610J1 - 90610J12, 2014.

75. Nguyen, T., Mariani, S., Phillips, R., Kijanka, P., Lanza di Scalea, F., Staszewski, W., and Fateh, M., “Non-Contact High Speed Ultrasonic Guided Wave Inspections Of Rails,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE Annual International Symposium - Health Monitoring of Structural and Biological Systems, T. Kundu, ed., San Diego, CA, March 9-13, Vol. 9064, pp. 90640V1 - 90640V12, 2014.

76. Tippmann, J. and Lanza di Scalea, F., “Experiments On A Wind Turbine Blade Testing An Indication For Damage Using The Causal And Anti-Causal Green’s Function Reconstructed From A Diffuse Field,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE Annual International Symposium - Health Monitoring of Structural and Biological Systems, T. Kundu, ed., San Diego, CA, March 9-13, Vol. 9064, pp. 90641I 1 - 90641I 7, 2014.

77. Tippmann, J., Zhu, X. and Lanza di Scalea, F., “Probabilistic Structural Health Monitoring Using Passive-Only Damage Detection by Reciprocity of Green’s Functions Reconstructed from Diffuse Acoustic Fields,” CD-ROM Proceedings of the 7th European Workshop on Structural Health Monitoring, (EWSHM 2014), Nantes, France, July 8-11, pp. 1-8, 2014.

78. Nucera, C. and Lanza di Scalea, F., “Nonlinear Ultrasonic Waves for Structural Health Monitoring,” CD-ROM Proceedings of the 7th European Workshop on Structural Health Monitoring, (EWSHM 2014), Nantes, France, July 8-11, pp. 1-8, 2014.

79. Mariani, S., Nguyen, T., Phillips, R., Kijanka, P., Lanza di Scalea, F., and Staszewski, W., “Non-Contact Ultrasonic Guided Wave Inspection Of Rails,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE Annual International Symposium -

14

Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, P. Lynch, C-B. Yun, K-W Wang, eds., San Diego, CA, March 10-14, Vol. 8692, pp. 86921L1-86921L12, 2013.

80. Manohar, A. and Lanza di Scalea, F., “Estimation of Defect Parameters in Quasi-Isotropic Composite Materials using Infrared Thermography,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE Annual International Symposium - Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, P. Lynch, C-B. Yun, K-W Wang, eds., San Diego, CA, March 10-14, Vol. 8692, pp. 86922I1-86922I113, 2013.

81. Zhu, X., Phillips, R. and Lanza di Scalea, F., “Axial Stress Determination Using Impedance-Based Method And Its Application On The Thermal Stresses Measurement In Continuous Welded Rail,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE Annual International Symposium - Health Monitoring of Structural and Biological Systems VII, T. Kundu, ed., San Diego, CA, March 10-14, Vol. 8695, pp. 86951N1- 86951N8, 2013.

82. Nucera, C. and Lanza di Scalea, F., “Nonlinear Guided Waves in Solids under Constrained Thermal Expansion,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE Annual International Symposium - Health Monitoring of Structural and Biological Systems VII, T. Kundu, ed., San Diego, CA, March 10-14, Vol. 8695, pp. 86950P1-86950P10, 2013.

83. Tippmann, J. and Lanza di Scalea, F., “Vibration control experiments using piezoelectric transducers on a wind turbine blade at UC San Diego,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE Annual International Symposium - Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, P. Lynch, C-B. Yun, K-W Wang, eds., San Diego, CA, March 10-14, Vol. 8692, pp. 86921H1-86921H8, 2013.

84. Nucera, C., Phillips, R., Zhu, X., Mariani, S., Lanza di Scalea, F., Fateh, M. and Carr, G., “Nonlinear Guided Waves For Neutral Temperature Measurement In Continuous Welded Rails: Results From Laboratory And Field Tests,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE Annual International Symposium - Health Monitoring of Structural and Biological Systems VII, T. Kundu, ed., San Diego, CA, March 10-14, Vol. 8695, pp. 8695281-86952812, 2013.

85. Manohar, A. and Lanza di Scalea, F., “Defect Detection and Size Estimation in Composite Materials Using Infrared Thermography,” Proceedings of the SEM 2013 Annual Conference & Exposition on Experimental and Applied Mechanics, Lombard, IL, June 3-5, 2013.

86. Nucera, C. and Lanza di Scalea, F., “Ultrasonic Nonlinear Guided Waves and Applications to Structural Health Monitoring,” Proceedings of the SEM 2013 Annual Conference & Exposition on Experimental and Applied Mechanics, Lombard, IL, June 3-5, 2013.

87. Nucera, C. and Lanza di Scalea, F., “Modeling Of Nonlinear Guided Waves And Applications To Structural Health Monitoring,” Proceedings of the 2013 ASCE International Workshop on Computing in Civil Engineering (IWCCE), University of Southern California, June 23-25, 2013.

88. Nucera, C. and Lanza di Scalea, F., “Nonlinear Guided Waves for Thermal Stress Measurement in Constrained Solids,” Structural Health Monitoring 2013 – A Roadmap to Intelligent Structures - Proceeding of the 9th Intl Workshop on Structural Health Monitoring, F-K. Chang, ed., Stanford University, pp. 972-979, Sept. 10-12, 2013.

89. Tippmann, J. and Lanza di Scalea, F., “Using Diffuse Fields For Monitoring The Structural Health Of Wind Turbine Blades,” Structural Health Monitoring 2013 – A Roadmap to Intelligent Structures - Proceeding of the 9th Intl Workshop on Structural Health Monitoring, F-K. Chang, ed., Stanford University, pp. 2369-2375, Sept. 10-12, 2013.

90. Mariani, S., Nguyen, T., Phillips, R., Kijanka, P, Lanza di Scalea, F. and Staszewski, W., “Non-Contact Ultrasonic Guided Wave Inspection Of Rails,” Structural Health Monitoring 2013 – A Roadmap to Intelligent Structures - Proceeding of the 9th Intl Workshop on Structural Health Monitoring, F-K. Chang, ed., Stanford University, pp. 2570-2577, Sept. 10-12, 2013. (BEST PAPER AWARD).

15

91. Nucera, C., White, S., Kim, H., and Lanza di Scalea, F., “Piezoelectric Rosettes For Acoustic Source Location In Composite Structures: Results From “Blunt” Impact Tests,” Structural Health Monitoring 2013 – A Roadmap to Intelligent Structures - Proceeding of the 9th Intl Workshop on Structural Health Monitoring, F-K. Chang, ed., Stanford University, pp. 2635-2642, Sept. 10-12, 2013.

92. Nucera, C. and Lanza di Scalea, F., “Modeling Of Nonlinear Guided Waves And Applications To Structural Health Monitoring,” Proceedings of the 164th Meeting of the Acoustical Society of America, Special Session on Ultrasonic Guided Waves for Nondestructive Evaluation and Structural Health Monitoring, organized by Prof. Kundu, Kansas City, Missouri, October 22-26, 2012. (INVITED PRESENTATION)

93. Lanza di Scalea, F., Kim, H., Chen, Zhi, Salamone, S., and Bartoli, I., “Impact Monitoring In Aerospace Panels Via Piezoelectric Rosettes,” Proceedings of the SEM XII International Congress and Exposition, Costa Mesa, CA, June 11-14, 2012.

94. Nucera, C., and Lanza di Scalea, F., “Nonlinear Guided Waves For Structural Health Monitoring – Numerical Algorithm And Application To Railroad Tracks,” Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 2012), Stone Mountain, Georgia, September 19-21, 2012.

95. Manohar, A., Tippmann, J., and Lanza di Scalea, F., “Localization Of Defects In Wind Turbine Blades And Depth Estimation Using Infrared Thermography,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE Annual International Symposium - Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, M. Tomizuka, ed., San Diego, CA, March 11-15, Vol. 8345, 2012.

96. Tippmann, J., Manohar, A., and Lanza di Scalea, F., “Wind Turbine Blade Inspection Tests At UCSD”, Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE Annual International Symposium - Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, M. Tomizuka, ed., San Diego, CA, March 11-15, Vol. 8345, 2012.

97. Nucera, C., Lanza di Scalea, F., Fateh, M., and Carr, G., “Theoretical Considerations And Applications Of Nonlinear Guided Waves For Nondestructive Assessment Of Structures – A Railroad Track Case-Study,” CD-ROM Proceedings of ASME Joint Rail Conference (JRC 2012), Philadelphia, PA, April 17-19, pp. 1-7, 2012.

98. Pau, A., Lanza di Scalea, F., and Capecchi, D., “Nonlinear Elastic Waves In Solids Under Thermal Variation,” Proceedings of the 20th AIMETA (Assiciazione Italiana Meccanica Teorica e Applicata) Conference, Bologna, Italy, September 12-15, 2011.

99. Lanza di Scalea, F., Salamone, S., Bartoli, I., Kim, H., and Rhymer, J., “Location And Identification Of Impact Forces In Composite Aerospace Panels,” Proceedings of the 40th National Conference of the Italian Society for Stress Analysis (AIAS), Palermo, Italy. September 7-10, 2011.

100. Nucera, C. and Lanza di Scalea, F., “Nonlinear Guided Waves: Theoretical Considerations and Applications to Thermal Stress Measurement in Continuous Welded Rail,” Proceedings of 8th International Workshop on Structural Health Monitoring, F-K. Chang, ed., Stanford University, September 9-1, 2011.

101. Bartoli, I., Salamone, S., Lanza di Scalea, F., Rhymer, J. and Kim, H., “Impact Force Identification in Aerospace Panels by an Inverse Ultrasonic Guided Wave Problem,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE Annual International Symposium – Health Monitoring of Structural and Biological Systems V – T. Kundu, ed., San Diego, CA, Vol. 7984, pp. 79841F1-11, 2011.

102. Nucera, C. and Lanza di Scalea, F., “Nonlinear Ultrasonic Guided Waves for Prestress Level Monitoring in Prestressing Strands for Post-tensioned Concrete Structures,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE Annual International Symposium – Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Systems, M. Tomizuka, C.B. Yun, V. Giurgiutiu, J. Lynch, eds., San Diego, CA, Vol. 7981, pp. 79810L1-14, 2011.

16

103. Salamone, S., Bartoli, I., Rhymer, J., Lanza di Scalea, F., and Kim, H., “Validation of the Piezoelectric Rosette Technique for Locating Impacts in Complex Aerospace Panels,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE Annual International Symposium – Health Monitoring of Structural and Biological Systems V – T. Kundu, ed., San Diego, CA, Vol. 7984, pp. 79841E1-11, 2011.

104. Coccia, S., Phillips, R., Nucera, C., Bartoli, I., Salamone, S., Lanza di Scalea, F., Fateh, M. and Carr, G., “UCSD/FRA Non-contact Ultrasonic Guided-wave System for Rail Inspection: An Update,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE Annual International Symposium – Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Systems, M. Tomizuka, C.B. Yun, V. Giurgiutiu, J. Lynch, eds., San Diego, CA, Vol. 7981, pp. 7981131-8, 2011.

105. Phillips, R., Nucera, C., Coccia, S., Bartoli, I., Fateh, M. and Carr, G., “Monitoring Thermal Stresses and Incipient Buckling in Continuous-Welded Rail: Results from the UCSD/FRA/BNSF Large-scale Laboratory Test Track,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE Annual International Symposium – Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Systems , M. Tomizuka, C.B. Yun, V. Giurgiutiu, J. Lynch, eds., San Diego, CA, Vol. 7981, pp. 79813T1-6, 2011.

106. Salamone, S., Bartoli, I., Nucera, C., Phillips, R. and Lanza di Scalea, F., “Health Monitoring of Prestressing Tendons in Post-tensioned Concrete Structures,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE Annual International Symposium – Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Systems, M. Tomizuka, C.B. Yun, V. Giurgiutiu, J. Lynch, eds., San Diego, CA, Vol. 7981, pp. 7981221-10, 2011.

107. Manohar, A. and Lanza di Scalea, F., “Automated Detection and Quantification of Impact Damage in Composite Structures using Pulsed Thermography,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE Annual International Symposium – Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Systems, M. Tomizuka, C.B. Yun, V. Giurgiutiu, J. Lynch, eds., San Diego, CA, Vol. 7981, pp. 79810V1-15, 2011.

108. Salamone, S., Bartoli, I., Phillips, R., Nucera, C., Srivastava, A., Lanza di Scalea, F., and Sikorsky, C., “Stress Monitoring by Ultrasonic Guided Waves in Prestressing Tendons for Post-tensioned Concrete Structures,” Proceedings of the 5th European Workshop on Structural Health Monitoring, F. Casciati and M. Giordano, eds., Sorrento, Italy, pp. 258-263, June 28 - July 4, 2010.

109. Bartoli, I., Phillips, R., Coccia, S., Lanza di Scalea, F., Salamone, S., Marzani, A., Fateh, M. and Carr, G., “Ultrasonic Guided Waves in Continuously Welded Rails for Buckling Prediction,” Proceedings of the 5th European Workshop on Structural Health Monitoring, F. Casciati and M. Giordano, eds., Sorrento, Italy, pp. 1235-1240, June 28 - July 4, 2010.

110. Nucera, C., Salamone, S., Bartoli, I., Phillips, R., Lanza di Scalea, F., and Sikorsky, C., “Nonlinear Ultrasonic Guided Waves for Stress Monitoring in Prestressing Tendons for Post-tensioned Concrete Structures,” Proceedings of the ASNT Conference on NDE/NDT for Highways and Bridges: Structural Materials Technology, New York, pp. 409-417, August 16-20, 2010.

111. Salamone, S., Bartoli, I., Phillips, R., Nucera, C, Lanza di Scalea, F., Sikorsky, C. and Tamutus, T., “Health Monitoring of Prestressing Tendons in Post-tensioned Concrete Structures,” Proceedings of the ASNT Conference on NDE/NDT for Highways and Bridges: Structural Materials Technology, New York, pp. 401-408, August 16-20, 2010.

112. Bartoli, I., Coccia, S., Phillips, R., Srivastava, A., Lanza di Scalea, F., Salamone, S., Fateh, M. and Carr, G., “Stress Dependence of Guided Waves in Rails,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE 17th Annual International Symposium – Health Monitoring of Structural and Biological Systems, San Diego, CA, Vol. 7650, pp. 765021-1-10, March 2010.

17

113. Bartoli, I., Salamone, S., Lanza di Scalea, F., Rhymer, J., and Kim, H., “Impact Force Identification On Aerospace Panels,” Proceedings of ASME International Mechanical Engineering Congress, Vancouver, British Columbia, November 12-18, 2010.

114. Manohar, A. and Lanza di Scalea, F., “Object Identification by Multispectral Fusion and Harr Classification,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE 17th Annual International Symposium – Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Systems, San Diego, CA, Vol. 7647, pp. 76471Q-1-7, March 2010.

115. Bartoli, I., Salamone, S., Mezzanotte, M., Lanza di Scalea, F., Rhymer, J. and Kim, H., “Impact Force Identification on Isotropic and Anistropic Panels,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE 17th Annual International Symposium – Health Monitoring of Structural and Biological Systems, San Diego, CA, Vol. 7650, pp. 765007-1-12, March 2010.

116. Bartoli, I., Nucera, C., Phillips, R., Salamone, S., Srivastava, A., Lanza di Scalea, F., Coccia, S., and Sikorsky, C., ““Stress Monitoring in Prestressing Tendons for Post-tensioned Concrete Structures by Nonlinear Ultrasonic Guided Waves,” Proceedings of 7th International Workshop on Structural Health Monitoring, F-K. Chang, ed., Stanford University, September 9-11, pp. 2115-2122, 2009.

117. Coccia, S., Phillips, R., Bartoli, I., Salamone, S., Lanza di Scalea, F., Fateh, M. and Carr, G., “Ultrasonic Guided Wave Detection of Rail defects: Prototype Development and Field Testing for the Federal Railroad Administration,” Proceedings of 7th International Workshop on Structural Health Monitoring, F-K. Chang, ed., Stanford University, September 9-11, pp. 255-262, 2009.

118. Srivastava, A., Bartoli, I., Salamone, S. and Lanza di Scalea, F., “Behavior of Nonlinear Higher Harmonics in Plate and Rod Guided Waves,” Proceedings of 7th International Workshop on Structural Health Monitoring, F-K. Chang, ed., Stanford University, September 9-11, pp. 1832-1839, 2009.

119. Bartoli, I., Salamone, S., Di Leo, P., Mezzanotte, M., Lanza di Scalea, F., Rhymer, J., Phillips, R., Ajovalasit, A. and D’Acquisto, L., “Impact Force Identification and Location on Isotropic and Composite Panels,” Proceedings of 7th International Workshop on Structural Health Monitoring, F-K. Chang, ed., Stanford University, September 9-11, pp. 1902-1909, 2009.

120. Manohar, A. and Lanza di Scalea, F., “Object Identification by Multispectral Fusion and Haar Classification,” Proceedings of the 5th International Workshop on Advanced Smart Materials and Smart Structures technology (ANCRiSST), Boston, MA, July 29 – August 1, 2009.

121. Coccia, S., Bartoli, I., Phillips, R., Lanza di Scalea, F., Fateh, M. and Carr, G., “Non-contact Ultrasonic Detection of Rail Defects,” Proceedings of the Transportation Research Board (TRB) 11th Joint Light Rail Conference, Los Angeles, CA, April 19-22, 2009.

122. Lanza di Scalea, F. and Manohar, A., “Object Identification by Multispectral Fusion and Haar Classification,” Proceedings of the NSF Civil, Mechanical, and Manufacturing Innovation (CMMI) Engineering Research and Innovation Conference, Honolulu, Hawaii, June 22-25, 2009.

123. Coccia, S., Bartoli, I., Lanza di Scalea, F., and Fateh, M., “Modeling High-frequency Wave Propagation in Rail Tracks for Crack Detection,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE 16th Annual International Symposium - Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Systems, M. Tomizuka, ed., San Diego, CA, Vol. 7292, pp. 7292671-72926712, 2009.

124. Marzani, A., Bocchini, P., Viola, E., Bartoli, I., Coccia, S., Salamone, S. and Lanza di Scalea, F., “A Software for the Computation of Acoustic Waves in Cylindrical, Plate and Arbitrary Cross-section Waveguides,” Proceedings of Italian Congress AIPND, Rome, 15-17 October 15-17, 2009.

125. Bartoli, I., Nucera, C., Srivastava, A., Salamone, S., Phillips, R., Lanza di Scalea, F., Coccia, S. and Sikorsky, C., “Nonlinear Ultrasonic Guided Waves for Stress Monitoring in Prestressing Tendons for Post-tensioned Concrete Structures,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE 16th Annual International Symposium - Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Systems, M. Tomizuka, ed.,

18

San Diego, CA, Vol. 7292, pp. 7292711-72927112, 2009. 126. Srivastava, A. and Lanza di Scalea, F., “On the Existence of Antisymmetric or Symmetric

Lamb Waves at Nonlinear Higher Harmonics,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE 16th Annual International Symposium – Health Monitoring of Structural and Biological Systems, T. Kundu, ed., San Diego, CA, Vol. 7295, pp. 7295191-72951912, 2009.

127. Salamone, S., Lanza di Scalea, F. and Bartoli, I., “Temperature Effects in Lamb-wave Structural Health Monitoring Systems,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE 16th Annual International Symposium – Health Monitoring of Structural and Biological Systems, T. Kundu, ed., San Diego, CA, Vol. 7295, pp. 72950O1-72950O12, 2009.

128. Lanza di Scalea, F., Bartoli, I., Salamone, S., Phillips, R., and Sikorsky, C., “Monitoring Prestress Level in Seven-wire Prestressing Tendons by Inter-wire Ultrasonic Wave Propagation,” Proceedings of 3rd International Conference on Smart Materials, Structures, and Systems (CIMTEC), Catania, Italy, June 8-13, 2008.

129. Srivastava, A. and Lanza di Scalea, F., “Quantitative Detection of Bond Defects in Composite Aircraft Panels by Global-Local Ultrasonic Method,” Proceedings of SAMPE Technical Conference on Materials and Process Innovation: Changing Our World, Long Beach, California, May 18-22, 2008.

130. Bartoli, I., Phillips, R., Lanza di Scalea, F., Salamone, S., Coccia, S, and Sikorsky, C., “Load Monitoring in Multi-wire Strands by Interwire Ultrasonic Measurements,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures and Materials and NDE for Health Monitoring and Diagnostics – Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Structures, M. Tomizuka, ed., San Diego, California, Vol. 6932, pp. 6932091-69320912, 2008.

131. Sabra, K., Srivastava, A., Duroux, A., Lanza di Scalea, F., and Bartoli, I., “Passive-only Wave-based Structural Health Monitoring from Ambient Noise,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures and Materials and NDE for Health Monitoring and Diagnostics – Health Monitoring of Structural and Biological Systems II, T. Kundu, ed., San Diego, California, Vol. 6935, pp. 6935081-6935087, 2008.

132. Srivastava, A., Bartoli, I., Coccia, S. And Lanza di Scalea, F., “Wave Propagation Models for Quantitative Defect Deetection by Ultrasonic Methods,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures and Materials and NDE for Health Monitoring and Diagnostics – Health Monitoring of Structural and Biological Systems II, T. Kundu, ed., San Diego, California, Vol. 6935, pp. 69350S1-69350S11, 2008.

133. Srivastava, A., Bartoli, I., and Lanza di Scalea, F., “Global-Local Modeling of Guided Waves for Quantitative Damage Detection,” Proceedings of the XXVI International Modal Analysis Conference (IMAC), Society for Experimental Mechanics, Orlando, FL, February 1-3, 2008.

134. Sabra, K., Srivastava, A., Bartoli, I., and Lanza di Scalea, F., “Structural Health Monitoring from Random Noise,” Proceedings of the XXVI International Modal Analysis Conference (IMAC), Society for Experimental Mechanics, Orlando, FL, February 1-3, 2008.

135. Bartoli, I., Lanza di Scalea, F., Phillips, R., Sorrivi, E. And Sikorsky, C., “Health Monitoring of Prestressing Tendons by Ultrasonic Waves and Embedded Sensors,” Proceedings of 6th International Workshop on Structural Health Monitoring: Quantification, Validation and Implementation,F-K. Chang, ed., Stanford University, September 11-13, pp. 476-482, 2007.

136. Srivastava, A., Bartoli, I., Lanza di Scalea, F., and Sabra, K., “Global-local Ultrasonic Method Applied to the Quantitative Detection of Defects in Aircraft Panels,” Proceedings of 6th International Workshop on Structural Health Monitoring: Quantification, Validation and Implementation, F-K. Chang, ed., Stanford University, September 11-13, pp. 1604-1611, 2007.

137. Coccia, S., Bartoli, I., Lanza di Scalea, F., Rizzo, P., and Fateh, M., “Non-contact Ulrasonic Rail Deefect Detection System: Prototype Development and Field Testing,” Proceedings of 6th International Workshop on Structural Health Monitoring: Quantification, Validation and Implementation, F-K. Chang, ed., Stanford University, September 11-13, pp. 1223-1230, 2007.

19

138. Sabra, K., Srivastava, A., and Lanza di Scalea, F., “Structural Health Monitoring by Extraction of Coherent Guided Waves from Ambient Noise,” Proceedings of 6th International Workshop on Structural Health Monitoring: Quantification, Validation and Implementation, F-K. Chang, ed., Stanford University, September 11-13, pp. 1637-1644, 2007.

139. Rizzo, P., Coccia, S., Lanza di Scalea, F., Bartoli, I. and Fateh, M., “Non-contact Rail Flaw Detection System: First Field Test,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures and Materials and NDE for Health Monitoring and Diagnostics – Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Systems, San Diego, California, Vol. 6529, pp. 65293W1- 65293W11, 2007.

140. Matt, H. and Lanza di Scalea, F., “Macro-fiber Composite Piezoelectric Rosettes for Acoustic Source Location in Complex Structures,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures and Materials and NDE for Health Monitoring and Diagnostics – Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Systems, San Diego, California, Vol. 6529, pp. 65290Q1-65290Q12, 2007.

141. Matt, H. and Lanza di Scalea, F., “Macro-fiber Composite Piezoelectric Rosettes for Acoustic Source Location in Complex Structures,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures and Materials and NDE for Health Monitoring and Diagnostics – Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Systems, San Diego, California, Vol. 6529, pp. 65290Q1-65290Q12, 2007.

142. Bartoli, I., Marzani,A., Lanza di Scalea, F., Rizzo, P., Viola, E., Sorrivi, E., and Phillips, R. “SAFE Modeling of Waves for the Structural Health Monitoring of Prestressing Tendons,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures and Materials and NDE for Health Monitoring and Diagnostics – Health Monitoring of Structural and Biological Systems, San Diego, California, Vol. 6532, pp. 65320D1-65320D12, 2007.

143. Lanza di Scalea, F., Rizzo, P., Coccia, S., Bartoli, I., and Fateh, M. “Development of a Non-contact Defect Detection System for Railroad Tracks for the US Federal Railroad Administration,” Proceedings of 3rd European Workshop on Structural Health Monitoring, A. Guemes, ed., Granada, Spain, July 5-7, pp. 767-774, 2006.

144. Matt, H., Bartoli, I., Salamone, S., Rizzo, P., Lanza di Scalea, F., Park, G. and Farrar, C., “Automated Damage Detection in UAV Wing Skin-to-spar Joints Based on Outlier Analysis of Guided Wave Energy,” Proceedings of 3rd European Workshop on Structural Health Monitoring, A. Guemes, ed., Granada, Spain, July 5-7, pp. 1012-1019, 2006.

145. Bartoli, I., Marzani, A., Lanza di Scalea, F. and Viola, E., “Modeling Guided Wave Propagation for Structural Health Monitoring of Damped Waveguides,” Proceedings of 3rd European Workshop on Structural Health Monitoring, A. Guemes, ed., Granada, Spain, July 5-7, pp. 1054-1061, 2006.

146. Lanza di Scalea, F., Matt, H., Bartoli, I., Srivastava, A., Park, G. and Farrar, C., “The Fundamental Response of Piezoelectric Guided-wave Sensors and Applications to Damage and Impact Location,” Proceedings of 3rd European Workshop on Structural Health Monitoring, A. Guemes, ed., Granada, Spain, July 5-7, pp. 1271-1280, 2006.

147. Marzani, A., Bartoli, I., Lanza di Scalea, F. and Viola, E., “Finite Element Based Technique for Modeling Propagative Stress Waves in Axisymmetric Viscoelastic Waveguides,” CD-ROM Proceedings of the 16th Italian Conference on Computational Mechanics, Ubertini, Viola, De Miranda, Castellazzi, eds., Bologna, Italy, 2006.

148. Rizzo, P., Matt, H., Coccia, S., Lanza di Scalea, F., Bartoli, I., Marzani, A. and Viola, E., “Guided Ultrasonic Waves for the Inspection of Structural Components,” CD-ROM Proceedings of the 16th Italian Conference on Computational Mechanics, Ubertini, Viola, De Miranda, Castellazzi, eds., Bologna, Italy, 2006.

149. Rizzo, P., Bartoli, I, Coccia, S., and Fateh, M., “Unsupervised Learning Algorithm for High-speed Defect Detection in Rails by Laser/air-coupled Non-contact Ultrasonic Testing,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures and Materials and NDE for Health Monitoring and Diagnostics – Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Systems, San Diego, California, Vol. 6174,

20

pp. 61742G1-61742G12, 2006. 150. Rizzo, P., Sorrivi, E., Lanza di Scalea, F. and Viola, E., “Damage Detection in Multi-wire

Strands by Discrete Wavelet-based Outlier Analysis and Embedded Guided Ultrasonic Waves,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures and Materials and NDE for Health Monitoring and Diagnostics – Modeling, Signal Processing and Control, San Diego, California, Vol. 6166, pp. 61660U1-61660U12, 2006.

151. Bartoli, I., Marzani, A., Matt, H., Lanza di Scalea, F. and Viola, E., “Modeling Wave Propagation in Damped Waveguides of Arbitrary Cross-section, ” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures and Materials and NDE for Health Monitoring and Diagnostics – Health Monitoring and Smart NDE of Structural and Biological Systems V, San Diego, California, Vol. 6177, pp. 61770A1-61770A12, 2006.

152. Matt, H., Bartoli, I., Coccia, S., Lanza di Scalea, F., Oliver, J., Kosmatka, J., Park, G. and Farrar, C., “Ultrasonic Guided Wave Monitoring of Composite Bonded Joints Using Macro Fiber Composite Transducers,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures and Materials and NDE for Health Monitoring and Diagnostics – Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Systems, San Diego, California, Vol. 6174, pp. 61742D1-61742D9, 2006.

153. Park, G., Farrar, C., Lanza di Scalea, F. and Coccia, S., “Self-Diagnosis and Validation of Active Sensors used for Structural Health Monitoring,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures and Materials and NDE for Health Monitoring and Diagnostics – Smart Structures and Integrated Systems, San Diego, California, Vol. 6173, pp. 61731N1-61731N9, 2006.

154. Matt, H., Bartoli, I., Coccia, S., Lanza di Scalea, F., Kosmatka, J., Park, G., and Farrar, C., “Guided Wave Interrogation of Composite Bonded Joints Using MFC Sensors,” Proceedings of the SEM IMAC 24th Conference and Exposition on Structural Dynamics, St. Louis, MO, 2006.

155. Bartoli, I., Marzani, A., Matt, H., Lanza di Scalea, F. and Viola, E., “Modeling Guided Wave Propagation for Structural Health Monitoring Applications,” Proceedings of the SEM IMAC 24th Conference and Exposition on Structural Dynamics, St. Louis, MO, 2006.

156. Marzani, A., Bartoli, I., Lanza di Scalea, F., and Viola, E., “Enhancement in Modeling Guided Wave Propagation by Semi-Analytical Finite Element Method for Ultrasonic Nondestructive Evaluation Purposes,” Abstract Proceedings of the 7th World Congress on Computational Mechanics, Los Angeles, CA, July 16-22, 2006.

157. Lanza di Scalea, F., Rizzo, P., Coccia, S., Bartoli, I. and Fateh, M., “Laser/air-coupled Hybrid Non-contact System for Defect Detection in Rail Tracks: Status of FRA Prototype Development at UC San Diego,” CD-ROM Proceedings of the 85th Annual Meeting of the National Transportation Research Board, Washington, DC, 2006.

158. Marzani, A., Bartoli, I., Lanza di Scalea, F. and Viola, E., “Guided Wave Features in Absorbing Waveguide with Arbitrary Cross-section,” CD-ROM Proceedings of the 17th AIMETA Congress on Theoretical and Applied Mechanics, Borri, C., Facchini, L., Federici, G., eds., Firenze, Italy, 2005.

159. Matt, H., Bartoli, I., Coccia, S., Lanza di Scalea, F., Kosmatka, J., Park, G. and Farrar, C., “Built-in Guided-wave Diagnostic System for the Wing Skin-to-spar Bond in Unmanned Aerial Vehicles,” Proceedings of the 5th International Workshop on Structural Health Monitoring, F-K. Chang, ed., Stanford University, pp. 453-461, 2005.

160. Rizzo, P., Bartoli, I., Lanza di Scalea, F., Coccia, S. and Fateh, M., “High-speed Defect Detection in Rails by Non-contact Guided Ultrasonic Testing,” Proceedings of SPIE (International Society for Optical Engineering) 10th International Symposium on Nondestructive Evaluation for Health Monitoring and Diagnostics– Health Monitoring and Smart NDE of Structural and Biological Systems IV, San Diego, California, Vol. 5768, pp.274-284, 2005.

21

161. Rizzo, P. and Lanza di Scalea, F., “Wavelet Coefficient Analysis for the Quantitative Determination of Damage in Tendons and Cables,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures and Materials/NDE Joint Conference – Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Systems, San Diego, California, Vol. 5765, pp. 863-872, 2005.

162. Rizzo, P., Bartoli, I. and Lanza di Scalea, F., “Feature extraction for high-speed defect detection in rails by non-contact guided ultrasonic testing,” CD-ROM Abstract Proceedings of the 14th Annual Research Symposium of the American Society for Nondestructive Testing, Albuquerque, NM, 2005.

163. Matt, H., Bartoli, I., Lanza di Scalea, F., Marzani, A., Coccia, S., Oliver, J., Kosmatka, J., Rizzo, P., and Restivo, G., “A Guided-wave System for Monitoring the Wing Skin-to-spar Bond in Unmanned Aerial Vehicles,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures and Materials/NDE Joint Conference – Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Systems, San Diego, California, Vol. 5765, pp. 658-768, 2005.

164. Rizzo, P. and Lanza di Scalea, F., “Feature extraction for the NDE of steel strands with the aid of the Discrete Wavelet Transform,” CD-ROM Abstract Proceedings of the 14th Annual Research Symposium of the American Society for Nondestructive Testing, Albuquerque, NM, 2005.

165. Rizzo, P., Bartoli, I., Coccia, S., Lanza di Scalea, F., and Fateh, M., “Enhancement in Guided Wave Structural Health Monitoring by the Discrete Wavelet Processing: Application to Multi-wire Strands and Rail Tracks,” Proceedings of the 5th International Workshop on Structural Health Monitoring, F-K. Chang, ed., Stanford University, pp. 1259-1266, 2005.

166. Lanza di Scalea, F., Rizzo, P. and Marzani, A., “Propagation of Ultrasonic Guided Waves in Lap-shear Adhesive Joints,” Proceedings of SPIE (International Society for Optical Engineering) 9th International Symposium on NDE for Health Monitoring and Diagnostics – Health Monitoring and Smart Nondestructive Evaluation of Structural and Biological Systems, San Diego, California, Vol. 5294, pp. 78-88, 2004.

167. Rizzo, P. and Lanza di Scalea, F., “Discrete Wavelet Transform to Improve Guided-wave-based Health Monitoring of Tendons and Cables,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE Joint Conference – Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, San Diego, California, Vol. 5391, pp. 523-532, 2004.

168. Rizzo, P., Marzani, A., Lanza di Scalea, F. and Benzoni, G., “Mobile Acoustic System for the Detection of Surface-breaking Cracks in Pavement,” Proceedings of SPIE (International Society for Optical Engineering) 11th International Symposium on Smart Structures and Materials – Smart Sensor Technology and Measurement Systems, San Diego, California, Vol. 5384, pp. 98-107, 2004.

169. Rizzo, P. and Lanza di Scalea, F., “Discrete Wavelet Transform to Improve Guided-wave-based Health Monitoring of Tendons and Cables,” CD-ROM Proceedings of the Society for Experimental Mechanics 10th International Congress on Experimental and Applied Mechanics, Costa Mesa, California, 2004.

170. Lanza di Scalea, F., Rizzo, P. and Marzani, A., “Propagation of Ultrasonic Guided Waves in Lap-shear Adhesive Joints,” Abstract Proceedings of the Society for Experimental Mechanics 10th International Congress on Experimental and Applied Mechanics, Costa Mesa, California, p. 120, 2004.

171. Rizzo, P. and Lanza di Scalea, F., “Discrete Wavelet Transform to Improve Guided-wave-based Health Monitoring of Tendons and Cables,” Abstract Proceedings of the Society for Experimental Mechanics 10th International Congress on Experimental and Applied Mechanics, Costa Mesa, California, p. 120, 2004.

22

172. Lanza di Scalea, F., Rizzo, P. and Marzani, A., “Propagation of Ultrasonic Guided Waves in Lap-shear Adhesive Joints,” CD-ROM Proceedings of the Society for Experimental Mechanics 10th International Congress on Experimental and Applied Mechanics, Costa Mesa, California, 2004.

173. Rizzo, P., Palmer, M. and Lanza di Scalea, F., “Ultrasonic Characterization of Steel Rods for Health Monitoring of Civil Structures,” Proceedings of SPIE (International Society for Optical Engineering) 10th Annual International Symposium on Smart Structures and Materials –Smart Systems and Nondestructive Evaluation for Civil Infrastructures, S-C. Liu, ed., San Diego, California, Vol. 5057, pp. 75-84, 2003.

174. McNamara, J. and Lanza di Scalea, F., “Long-range Defect Detection in Rail Tracks by Guided Vibrations,” Paper Summaries Book of the Fall Conference and Quality Testing Show of the of the American Society for Nondestructive Testing, Pittsburgh, Pennsylvania, p. 106, 2003.

175. McNamara, J. and Lanza di Scalea, F., “Health Monitoring of Railroad Tracks by Wavelet Analysis,” Proceedings of SPIE (International Society for Optical Engineering) 10th Annual International Symposium on Smart Structures and Materials –Smart Systems and Nondestructive Evaluation for Civil Infrastructures, S-C. Liu, ed., San Diego, California, Vol. 5057, pp. 318-328, 2003.

176. Rizzo, P. and Lanza di Scalea, F., “Guided Waves in Steel Strands for Health Monitoring of Civil Structures,” Paper Summaries Book of the Fall Conference and Quality Testing Show of the American Society for Nondestructive Testing, Pittsburgh, Pennsylvania, p. 105, 2003.

177. Lanza di Scalea, F., Rizzo, P. and Marzani, A., “Propagation of Ultrasonic Guided Waves in Lap-shear Adhesive Joints: Case of A0 Incident Lamb Wave,” Paper Summaries Book of the Fall Conference and Quality Testing Show of the of the American Society for Nondestructive Testing, Pittsburgh, Pennsylvania, p. 20, 2003.

178. Lanza di Scalea, F., Robinson, J., Tuzzeo, D. and Bonomo, M., “Guided Wave Ultrasonics for NDE of Aging Aircraft Components,” Proceedings of SPIE (International Society for Optical Engineering) 7th Annual International Symposium on NDE for Health Monitoring and Diagnostics – NDE and Health Monitoring of Aerospace Materials and Civil Infrastructures, San Diego, California, Vol. 4704, pp. 123-132, 2002.

179. Rizzo, P. and Lanza di Scalea, F., “Monitoring Steel Strands via Ultrasonic Measurements,” Proceedings of SPIE (International Society for Optical Engineering) 9th Annual International Symposium on Smart Structures and Materials – Smart Systems for Bridges, Structures and Highways, San Diego, California, Vol. 4696, pp. 62-73, 2002.

180. McNamara, J. and Lanza di Scalea, F.,” Advances in Health Monitoring of Railroad Tracks,” Proceedings of SPIE (International Society for Optical Engineering) 7th Annual International Symposium on NDE for Health Monitoring and Diagnostics – Smart NDE and Health Monitoring of Structural and Biological Systems, San Diego, California, Vol. 4702, pp. 250-261, 2002.

181. Cicerone, S., Rizzo, P., Lanza di Scalea, F., Karbhari, V. and Seible, F., “Proof Testing and Acoustic Emission Monitoring of CFRP Stay Cables for the I-5/Gilman Bridge,” Proceedings of the 1st International Conference on Bridge Maintenance, Safety and Management (IABMAS 2002), Barcelona, Spain, 2002.

182. McNamara, J. and Lanza di Scalea, F., “NDE of Railroad Tracks by UT: Two Complementary Methods,” Paper Summaries Book of the 2002 Fall Conference and Quality Testing Show of the American Society for Nondestructive Testing, San Diego, California, p. 221, 2002.

183. Rizzo, P., McNamara, J., Palmer, M. and Lanza di Scalea, F., “Health Monitoring of Steel Strands Via Ultrasonic Guided Waves,” Paper Summaries Book of the Fall Conference and Quality Testing Show of the American Society for Nondestructive Testing, San Diego, California, p. 132, 2002

184. Tuzzeo, D., Lanza di Scalea, F. and Ajovalasit, A., “Ispezione Ultrasonica di Componenti Strutturali di Uso Aeronautico con Tecnica Non a Contatto,” (Ultrasonic Inspection of Aerospace Structural Components by Non-contact Method) Proceedings of the 30th Conference of the Italian Society for Stress Analysis (AIAS), Alghero, Italy, pp. 1537-1546, 2001.

23

185. Bonomo, M., Lanza di Scalea, F. and Ajovalasit, A., “Visualizzazione Fotoelastica di Onde Ultrasoniche di Lamb con Applicazione al Controllo Non Distruttivo di Giunti Incollati,” (Photoelastic Visualization of Ultrasonic Lamb Waves for the Nondestructive Inspection of Bonded Joints) Proceedings of the 30th Conference of the Italian Society for Stress Analysis (AIAS), Alghero, Italy, pp. 829-838, 2001.

186. Lanza di Scalea, F., Tuzzeo, D. and Bonomo, M., “Nondestructive Evaluation of Aging Aircraft by Non-contact Air-coupled Ultrasonics,” Proceedings of the Society for Experimental Mechanics Spring Conference on Experimental and Applied Mechanics, Portland, Oregon, pp. 490-493, 2001.

187. Rizzo, P. and Lanza di Scalea, F., “Acoustic Emission Monitoring of CFRP Cables for Cable-stayed Bridges,” Proceedings of the Society for Experimental Mechanics Spring Conference on Experimental and Applied Mechanics, Portland, Oregon, pp. 314-317, 2001.

188. Cicerone, S., Seible, F., Karbhari, V.M., Rizzo, P. and Lanza di Scalea, F., “Proof Testing of Carbon Fiber Reinforced Stay Cables for the I-5/Gilman Advanced Technology Bridge,” Proceedings of the 6th Caltrans Seismic Research Workshop, Sacramento, California, 2001.

189. Lanza di Scalea, F. and Rizzo, P., “Acoustic Emission Monitoring of Large-scale CFRP Cables for Suspension Bridges,” Proceedings of the 10th Spring Conference of the American Society for Nondestructive Testing, Denver, Colorado, p. 38, 2001.

190. Lanza di Scalea, F., “NDE of Aging Aircraft by Non-contact Air-coupled Guided Wave Ultrasonics,” Proceedings of the 10th Spring Conference of the American Society for Nondestructive Testing, Denver, Colorado, p. 62, 2001.

191. Lanza di Scalea, F., Rizzo, P., Karbhari, V.M. and Seible, F., “Acoustic Emission Monitoring of CFRP Cables for Cable Stayed Bridges,” Abstract Proceedings of the Joint Mechanics and Materials Summer Conference of the American Society of Mechanical Engineers (Materials and Applied Mechanics Division), American Society of Civil Engineers (Engineering Mechanics Division) and Society of Engineering Science, San Diego, California, p. 101, 2001.

192. Rizzo, P. and Lanza di Scalea, F., “Acoustic Emission Monitoring of CFRP Cables for Cable-Stayed Bridges,” Proceedings of SPIE (International Society for Optical Engineering) 6th Annual International Symposium on NDE for Health Monitoring and Diagnostics – Health Monitoring and Management of Civil Infrastructure Systems, Newport Beach, California, Vol. 4337, pp. 129-138, 2001.

193. Lanza di Scalea, F., Kenderian, S. and Green, R.E., Jr., “Non-contact Ultrasonic Inspection of Rail Tracks,” Proceedings of the 45th International SAMPE Symposium and Exhibition, Long Beach, California, pp. 1762-1769, 2000.

194. Lanza di Scalea, F., Karbhari, V.M. and Seible, F., “The I5/Gilman Advanced Technology Bridge Project,” Proceedings of SPIE (International Society for Optical Engineering) 7th Annual International Symposium on Smart Structures and Materials, Newport Beach, California, Vol. 3988, pp. 10-17, 2000.

195. Djordjevic, B.B., Kenderian, S. and Lanza di Scalea, F., “Non-contact and Remote Sensing of Broken Rails,” Proceedings of the American Society for Nondestructive Testing 9th Annual Research Symposium “On Track on a Safer Millennium,” Birmingham, Alabama, 2000.

196. Lanza di Scalea, F. and Green, R.E., Jr., "Advances in Optical Methods for Nondestructive Evaluation", Proceedings of the Society for Experimental Mechanics Spring Conference on Theoretical, Experimental and Computational Mechanics, Cincinnati, Ohio, pp. 407-410, 1999.

197. Djordjevic, B.B., Lanza di Scalea, F. and Berndt, T.P., "Hybrid Ultrasonic System for On-line Control of Fiber Placement Process," Proceedings of the 44th International SAMPE Symposium and Exhibition, Long Beach, California, pp. 1240-1245, 1999.

198. Lanza di Scalea, F., Djordjevic, B.B., Berndt, T.P. and Green, R.E., Jr., "Non-contact Ultrasonics for Process Control of Laminated Composites," Proceedings of the 8th Annual Research Symposium (Automation and Diagnostic in NDE) of the American Society for Nondestructive Testing, Orlando, Florida, p. 137, 1999.

24

199. Lanza di Scalea, F. and Green, R.E., Jr., "Non-contact Ultrasonics for Materials Nondestructive Evaluation," Journal of the Acoustical Society of America (Program of the 138th Meeting of the Acoustical Society of America), 106(4), pp. 2148-2149, 1999.

200. Lanza di Scalea, F. and Green, R.E., Jr., "Advances in Optical Methods for Nondestructive Evaluation of Structural Materials," CD-ROM Proceedings of the 13th American Society of Civil Engineers (Engineering Mechanics Division) Conference, Baltimore, Maryland, 1999.

201. Lanza di Scalea, F. and Green, R.E., Jr., "Experimental and Numerical Study of the Elastic Behavior of Composite Mechanically-fastened Joints," CD-ROM Proceedings of the 13th American Society of Civil Engineers (Engineering Mechanics Division) Conference, Baltimore, Maryland, 1999.

202. Soonsung, H., Lanza di Scalea, F. and Cloud, G.L., "Image Processing Algorithms for Whole-field Strain by Electronic Speckle Pattern Interferometry," Proceedings of the Society for Experimental Mechanics Spring Conference on Experimental and Applied Mechanics, Houston, Texas, pp. 93-96, 1998.

203. Lanza di Scalea, F., "Strain Gage Thermal Response in Orthotropic Materials: One Compensating Gage for Multiple Active Ones," Proceedings of the Society for Experimental Mechanics Spring Conference on Experimental and Applied Mechanics, Houston, Texas, pp. 519-522, 1998.

204. Lanza di Scalea, F., "Thermal Expansion Coefficients of Orthotropic Materials using Strain Gage Rosettes," Proceedings of the Society for Experimental Mechanics Spring Conference on Experimental and Applied Mechanics, Houston, Texas, pp. 515-518, 1998.

205. Cloud, G.L., Lanza di Scalea, F. and Soonsung, H., “Image Processing Algorithms for Whole-field Strain Measurement by Electronic Speckle Pattern Interferometry,” 11th International Conference on Experimental Mechanics (Abstract Proceedings), Oxford, United Kingdom, 1998.

206. Lanza di Scalea, F., Soonsung, H., Cloud, G.L. and Raju, B., "Speckle Interferometry and Numerical Analysis for Strain Map in Pin-joint," Proceedings of the Society for Experimental Mechanics Spring Conference on Experimental and Applied Mechanics, Houston, Texas, pp. 89-92, 1998.

207. Lanza di Scalea, F., Cappello, F. and Cloud, G.L., "On the Effect of Interference Fits in Composite Pin-joints," Proceedings of the 12th Annual Technical Conference of the American Society for Composites, Dearborn, Michigan, pp. 727-735, 1997.

208. Lanza di Scalea, F., Cappello, F. and Cloud, G.L., "On the Elastic Behavior of a Cross-ply Composite Pin-joint with Clearance Fits," Proceedings of the 12th Annual Technical Conference of the American Society for Composites, Dearborn, Michigan, pp. 697-706, 1997.

209. Lanza di Scalea, F., "Strain in Isotropic Pin-joints: Experimental and Numerical Analysis," Proceedings of the International Student Paper Presentation Competition of the Society for Experimental Mechanics Spring Conference on Experimental Mechanics, Bellevue, Washington, pp. 7-8, 1997.

210. Lanza di Scalea, F. and Cloud, G.L., "Stress near Interference-fit Composite Fasteners by Speckle Interferometry," Proceedings of the Society for Experimental Mechanics Spring Conference on Experimental Mechanics, Bellevue, Washington, pp. 150-151, 1997.

211. Lanza di Scalea, F. and Cloud, G.L., "Strain Measurement by Digital Speckle Pattern Interferometry," Proceedings of the Society for Experimental Mechanics Spring Conference on Experimental Mechanics, Bellevue, Washington, pp. 297-298, 1997.

212. Cloud, G.L. and Lanza di Scalea, F., “Determination of Stress Around a Single Pin-loaded Hole in Fiber-reinforced Plastic Using Phase-stepped Digital Speckle Pattern Interferometry,” Proceedings of the 25th AIAS (Italian Society for Stress Analysis) National Conference, Gallipoli, Italy, pp. 319-326, 1996.

213. Cloud, G.L. and Lanza di Scalea, F., “High-precision Strain Measurement by Phase-stepped Digital Speckle Pattern Interferometry,” Proceedings of the 25th AIAS (Italian Society for Stress Analysis) National Conference, Gallipoli, Italy, pp. 311-318, 1996.

25

Patents 1. Defect Detection In Objects Using Statistical Approaches. Lanza di Scalea, F., Coccia, S.,

Bartoli, I., Salamone, S., Rizzo, P., US Patent No. 8,626,459, issued 01/07/2014. 2. Nonlinear Ultrasonic Testing For The Non-Destructive Measurement Of Longitudinal Thermal

Stresses In Solids. Lanza di Scalea, F. and Nucera, C. US Patent Application 14/766219, filed August 6, 2015.

3. Air-Coupled Ultrasonic Inspection of Rails. Lanza di Scalea, F. International PCT Application no. PCT/US2013/34977, filed April 2, 2013.

4. Characterization Of Surface Cracks In Rail. Lanza di Scalea, F. and Phillips, R. US Patent Application Publication no. US-2015-0068296-A1, March 12, 2015.

5. Wavelet Aided Multivariate Outlier Analysis To Enhance Defect Contrast In Thermal Images, Manohar, A. and Lanza di Scalea, F., US Provisional Patent Appl. 61/624,232, filed April 13, 2012.

6. Stress Detection in Rail. Lanza di Scalea, F., Nucera, C., Phillips, R., and Coccia, S. International PCT application no. PCT/US2012/062529, filed October 30, 2012.