Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
®
PUBLIC AUCTION
“Let Our Experience Be Your #1 Asset” ™
AUCTION: Thursday, March 30, 2006, 10:30 A.M. 36 rue Fortin Nord, Adstock, Quebec
TEKNO 90 INC.
®
CORPORATE ASSETS INC.2 St. Clair Ave. W., Suite 1002Toronto, Ontario, Canada M4V 1L5Tel: (416) 962-9600Fax: (416) 962-9601Email: [email protected]: www.corpassets.com
In Conjunction With
EXECUTIVE OFFICES11425 CRONHILL DRIVE, OWINGS MILLS, MARYLAND 21117
(410) 654-7500 • (800) 722-3334 • Fax (410) 654-5876email: [email protected] • www.michaelfox.com
(2) MAZAK FH 480 twin pallet CNC horizontal machining centers
1998
OKUMA CROWN 1420 CNC turning center 2001 OKUMA ES V3016 CNC vertical machining center
2000
CNC HORIZONTAL MACHINING CENTERS
(2) 1998 MAZAK FH 480 pallet type CNC horizontal machining Centers, with MAZATROL M PLUS control, 15.75" x 15.75" pallets, travels: x-22", y-22", z-20"; 15 to 12,000 RPM, ISO 40 taper, 30 position ATC, chip conveyor, s/n 138133, 138136
CNC TURNING CENTERS
2001 OKUMA CROWN 1420 CNC turning center with OKUMA OSP-U10L control, 14" max. turning dia., 49" max. turning length, 3" bar cap., speeds to 3,500 RPM, 15" dia. chuck, 12 station tool turret, 22 HP main drive, chip conveyor, s/n 01 2001 0351 (SEE COVER PHOTO)
1998 OKUMA CROWN 726E CNC turning center with OKUMA OSP-700L control, 10.63" max. turning dia., 20" max. turning length, 1.5" bar cap., 8" dia. chuck, 12 station tool turret, 12 HP main drive, chip conveyor, s/n 100407
(2) 1996 OKUMA L1420 CNC turning centers with OKUMA OSP control, 14" max. turning dia., 21" swing over bed, 26" max. turning length, 3" bar cap., 15" dia. chuck, 12 station tool turret, 22 HP main drive, up to 3,200 RPM, chip conveyor, s/n 08 03 01900, 1004 0702
1993 MAZAK QUICKTURN 18N CNC turning center with MAZATROL control, 17.3" nominal swing, 19.69" b/w centers, 2 1/4" bar cap., 10" dia. chuck, 10 station tool turret, chip conveyor, s/n 109710
1999 FEMCO HL 15B CNC turning center with MITSUBISHI control, 9.8" max. turning dia., 15" max. turning length, 2" bar cap., speeds to 4,800 RPM, 8" dia. chuck, 12 station tool turret, 10/15 HP main drive, s/n LJ9 0135
CNC VERTICAL MACHINING CENTERS
2000 OKUMA ES V3016 CNC vertical machining center with OKUMA OSP-U10M control, 37" x 20" table, travels: x-30", y-16", z-20.5", 50 to 8,000 RPM, 10/7.5 HP main drive, CAT 40 taper, 20 position ATC, s/n 5010 (SEE COVER PHOTO)
1995 OKUMA CADET V4020 CNC vertical machining center with OKUMA OSP-5020 control, 47" x 20" table, travels: x-40", y-20", z-20", 80 to 8,000 RPM, CAT 40 taper, 20 position ATC, s/n 0805 1025
1995 OKUMA CADET 1420 CNC vertical machining center with OKUMA OSP-700L control, 47" x 20" table, travels: x-40", y-20", z-20", CAT 40 taper, 20 position ATC, s/n 1004 0703
1994 OKUMA CADET MATE CNC vertical machining center with OKUMA OSP-700 M control, 47" x 20" table, travels: x-40", y-20", z-20", CAT 40 taper, 20 position ATC, s/n 0560
1994 COMET MIGHTY CNC 1730 CNC vertical machining center with FANUC 0M CNC control, 48" x 18" table, s/n 890764
TSUDAKOMA 10" 4th & 5th axis integrated rotary table
MAZAK QUICKTURN 18N CNC turning center 10" TSUDAKOMA 4th & 5th axis integrated rotary table
OKUMA CADET 1420 CNC vertical machining center
1995
OKUMA CADETMATE V4020 CNC vertical machining center
1995
2 AVAILABLE
FEMCO HL15B CNC turning center
1999
OKUMA L1420 CNC turning center
1996
2 AVAILABLE
2
MAZAK FH 480 twin pallet CNC horizontal boring mill
2 AVAILABLEView of MAZAK spindle & MAZATROL M plus control
This brochure is only a partial listingVISIT OUR WEBSITE FOR MORE DETAILED LISTINGS AND PHOTOS
www.corpassets.com
MACHINE SHOP EQUIPMENT
1997 MASINIMORTEXPORT SNA800/3000 gap bed engine lathe with 36" swing over bed, 52" swing in gap, 124" between centers, 4 1/4" bore, 20–1,250 RPM, inch/metric threading, DRO, s/n 7934759
MORI SEIKI 20" x 60" engine lathe with 2 1/8" bore, 28–1,350 RPM, inch/metric threading, s/n 1197
POLAMCO TUE40 engine lathe with 17" swing, 58" centers, s/n 9887716
HAVLIK Z3035B 4' radial arm drill with 11" dia. column, #4 MT, box table, s/n 00210
TOS KURIM FM 50 ram type turret mill
PEIPING 127 IAN RD drill grinder
DAVIS 15 keyseater, s/n 15-21
CANOX MIGMATIC 250 mig welder with wire feed cables
YALE GLP050TGNUAE084 LPG forklift truck with 5,000 lb. cap., 189" vertical lift, cushion tires, s/n A875BO3882W
CLARK LPG forklift with 5,500 lb. cap., 154" vertical reach, cushion tires, s/n 50-46-1152
1994 ATLAS COPCO GA22 rotary air compressor with 30 HP drive, s/n AII215207
ATLAS COPCO GA11 rotary screw air compressor with 15 HP cap., s/n ARP777251
ALSO: tool cabinets, hand tools, perishable tooling, CAT 40 tool holders, carbide tools bits, power tools, hydraulic jacks, strapping caddies, ladders, tote bins, chop saw, clamping hardware, pedestal grinders, 12" disk sander, (5) floor type drill presses, (3) electric hoists up to 1 ton, hydraulic pallet truck, dollies, machine vises, plate clamps, oxy acetylene torches, adjustable pallet racks, bar, tube, angle stock, etc.
PEIPING drill grinder ATLAS COPCO GA22 30 HP rotary screw air compressor
CANOX MIGMATIC 250 mig welder 4' HAVLIK radial arm drill
1994
View of DAVIS keyseater & drills, etc. View of YALE & CLARK 5,500 lb. LPG forklifts
View of steel inventory MORI SEIKI 20" x 60" engine lathe Sample view of CAT 40 taper tooling
MASINIMORTEXPORT 36" x 124" gap bed engine lathe
1997
3
AUCTION CONDUCTED BY CORPORATE ASSETS INC.For further information contact us at:
2 St. Clair Ave. W., Suite 1002,Toronto, OntarioCanada M4V 1L5
Tel: (416) 962-9600 • Fax: (416) 962-9601Email: [email protected]: www.corpassets.com
Toronto–Chicago
PROXY BIDDINGIf you are unable to attend this auction, we would be pleased to act as your proxy. Please contact our office at (416) 962-9600 or visit our website for a proxy bid form, terms and additional information.
APPRAISAL SERVICESWhat’s the real value of your equipment? If you require a detailed appraisal for banking, insurance, or internal purposes, consult with the certified experts at Corporate Assets Inc.
• We will appraise one machine or your complete plant
• Going concern, fair market, or liquidation values
We provide appraisal services anywhere in the world for all types of industrial manufacturing and processing equipment. Call us in complete confidence today with your requirements.Toronto: (416) 962-9600Fax: (416) 962-9601email: [email protected]–Chicago
MEMBER IN GOOD STANDING:
AUCTIONEER
S
ASSOCIATION
OF ALBER
TA
MEMBER
NAT
IONAL ASSOCIATIO
N
BA
N
KRUPTCY TRUSTEE
S
INSPECTIONWednesday, March 29th, 2006, 9:00 A.M. to 5:00 P.M.
DIRECTIONSFrom Quebec City’s JEAN LESAGE INTERNATIONAL AIRPORT: Follow Highway 73 South (Sud) over Pierre LaPorte Bridge. Exit Highway 20 West (Ouest) Montreal to Highway 269 South (Sud). Stay on Highway 269 through various towns & turns toward Thetford Mines. Proceed through to Robertsonville and stay on Highway 269 into Adstock. Upon entering Adstock, turn left on rue Fortin Nord. Plant is located on the left hand side, approximately 300 meters down. Look for auction signs. Please allow approximately 90 minutes traveling time from the airport.
ACCOMMODATIONS & CAR RENTALSPlease visit our website for details at www.corpassets.com
PAYMENTThe purchase price must be paid in full before or immediately after the conclusion of the auction.
All payments shall be by way of wire transfer, certified check, bank draft, or a company check accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: “NAME OF BANK hereby guarantees irrevocable payment of checks payable to Corporate Assets Inc. up to AMOUNT IN WORDS & CURRENCY for purchases made by our client NAME OF CLIENT. This letter is valid for purchases made at the auction of NAME OF AUCTION being held in CITY, STATE/PROVINCE on DATE.”
Payments may be made in advance of the auction via wire transfer and any balance in excess of the balance owing will be refunded after the auction.
The auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.
A Buyer’s Premium will apply at this sale.
REMOVALSmall items by Friday, March 31st, 2006, 5:00 P.M.; remainder of items by Thursday, April 6th, 2006, 3:00 P.M. NO EXCEPTIONS!
TERMSSee web
UPCOMING AUCTIONSMarch 21 – The Auction Centre Brampton (Toronto), Ontario Machine ToolsMarch 22 – Sommerville Design & Manufacturing Inc. Pickering, Ontario Type of Sale?April 11 – Gearco A Division of Volvo Motor Graders Ltd. Goderich, Ontario Automotive???Late May/June – Les Industries Davie Inc. Quebec City, Quebec Ship Building Facility
This brochure is only a partial listingVISIT OUR WEBSITE FOR MORE DETAILED LISTINGS AND PHOTOS
www.corpassets.com
INSPECTION EQUIPMENT
ALSO: inspection tooling, micrometers, verniers, gauges, calipers, MITUTOYO precision reference specimen,
OFFICE EQUIPMENT
ALSO: office furniture & business machines
PRINTED IN U.S.A. IP-6204821© 2006 CORPORATE ASSETS INC., ALL RIGHTS RESERVED
View of tooling
Please visit our website at
www.corpassets.com for a Pre-Registration
Form