PUBLIC AUCTIONBy order of the secured creditors, assets of

21700 Northwestern Hwy • Suite 1180

Southfield, Michigan 48075-4923

Ph: 248.569.9781 • Fx 248.569.9793

Sale is being held in conjunction with

www.maynards.com

11425 Cronhill Drive

Owings Mills (Baltimore), Maryland 21117

Toll Free: 800.722.3334 • Fx: 410.654.5876

www.goindustry.com

A u c t i o n e e r s • L i q u i d a t o r s • A p p r a i s e r s

31555 West Fourteen Mile Road, Suite 207

Farmington Hills, Michigan 48334

Ph 248.254.9999 • Fx 248.254.9995

Hilco Industrial, LLC

www.hilcoind.com

PLASTIC INJECTION MOLDERS

For more information, visit www.hilcoind.com or www.maynards.com2

By order of the secured creditors, assets of

WEDNESDAY, OCTOBER 1STBeginning at 10am Local Time

Preview DateTuesday, September 30th

9am to 4pm Local Time or By Appointment

Auction Location489 North Shore Drive

Benton Harbor, MI 49022

Preview Locations489 North Shore Drive • Benton Harbor, MI 49022

18300 West Hwy. US-12 (Plastic Masters)New Buffalo, MI 49117

Directions to SaleDirections from Detroit Area: I–94 West to Exit #33 –Business Loop 94 West. Follow Business Loop 94West/Main St. West 3 Miles into Downtown Benton Harbor.Turn Right on 5th St, Proceed 4/10 Mile to Plant on Right.(5th St. Turns into North Shore Drive)

Directions from Chicago Area: I–94 East to Exit #23 –Business Loop 94 East/Red Arrow Hwy. Proceed East onBusiness Loop 94 6–1/2 Miles Thru Downtown St. Joseph.Cross Over River Bridge into Benton Harbor, Continue Easton Business Loop 94/Main St. 1 Mile to 5th St. Turn Left on5th St., Proceed 4/10 Mile to Plant on Right. (5th St. Turnsinto North Shore Drive)

Travel InformationAirlines:American Airlines . . . . . . . . . . . . . . . . . . . 800.433.7300Northwest Airlines . . . . . . . . . . . . . . . . . . . 800.225.2525United Airlines . . . . . . . . . . . . . . . . . . . . . . 800.241.6522Delta Airlines . . . . . . . . . . . . . . . . . . . . . . . 800.221.1212Southwest Airlines . . . . . . . . . . . . . . . . . . 800.435.9792Hotels:Hampton Inn (Stevensville) . . . . . . . . . . . . 269.429.2700Holiday Inn Express (St. Joseph) . . . . . . . 269.982.0115Courtyard by Marriott (Benton Harbor) . . . 269.925.3000Holiday Inn Express (Benton Harbor) . . . . 800.345.8082Baymont Suites (Stevensville) . . . . . . . . . 269.428.9111

Further Information• All payments must be made payable to

Maynards.• A buyer’s premium will be in effect. The auction

will be conducted in English, accepting U.S.Currency only.

• Removal Deadline is Wednesday, October 15, 2008with Hours of Removal between 8am to 4pm Mondaythru Friday. After October 15th at 4pm buyer willincur a cost of $500 daily for entry into the facility.

• For further information please contact Taso Sofikitis at 248.569.9781 or Email taso@maynards.com

• For Payment & Customer Service please contact: Becky Kuznicki at 517.719.8134 orEmail becky@maynards.com

(34) PLASTIC INJECTION MOLDING MACHINES1 – CINCINNATI MILACRON MAXIMA MODEL MM1100–85, 1100–TON X 85 OZ. 3–PLATEN PLASTIC INJECTION MOLDING MACHINE,

S/N H32A0100011 (1999), Hydraulic Clamp, Platen Size 82.7” x 61.2”, Tie Bar Spacing 60–1/2” x 45”, 78.7” Clamp Stroke, 94.5” Maximum Daylight,CAMAC 486C Microprocessor Controls (#574)

1 – CINCINNATI MILACRON MAGNA MODEL MH–500–68, 500–TON X 68 OZ. 3–PLATEN PLASTIC INJECTION MOLDING MACHINE, S/N H05A0400067 (2000), Hydraulic Clamp, Platen Size 48” x 48”, Tie Bar Spacing 34” x 34”, CAMAC 486C Microprocessor Controls (#563)

1 – CINCINNATI MILACRON VISTA MODEL VT–550–68, 550–TON X 68 OZ. PLASTIC INJECTION MOLDING MACHINE, S/N T60A0398024 (1998),Toggle Clamp, Platen Size 49” x 49”, Tie Bar Spacing 34.2” x 32.5”, Core Pull, Ejector, CAMAC 486C Microprocessor Controls (#573)

1 – NATCO 650–TON X 100 OZ. PLASTIC INJECTION MOLDING MACHINE, S/N 650E–70, Hydraulic Clamp, Platen Size 48” x 48”, Tie Bar Spacing31” x 31”, Screw Ram, Barber Colman 3–Zone Standard Temperature Controls, Feed Hopper (#575)

1 – CINCINNATI MILACRON MODEL 500–70, 500–TON X 70 OZ. PLASTIC INJECTION MOLDING MACHINE, S/N 4025A21/87–07, Hydraulic Clamp,Tie Bar Spacing 32” x 32”, Platen Size 48” x 48”, Cincinnati Milacron Microprocessor Controls (#565)

1 – CINCINNATI MILACRON MODEL VH500–54, 500–TON X 54 OZ. PLASTIC INJECTION MOLDING MACHINE, S/N 3905A21/89–20, HydraulicClamp, Tie Bar Spacing 34” x 34”, Platen Size 48” x 48”, CAMAC VLC Microprocessor Controls, Hydraulic Eject, Core Pull (#567)

1 – CINCINNATI MILACRON MODEL 500–TON X 48 OZ. PC3 PLASTIC INJECTION MOLDING MACHINE, S/N 4005A21/80–1, Hydraulic Clamp, TieBar Spacing 32–1/2” x 32–1/2” Platen Size 48” x 48”, Hydraulic Ejectors, Core Pull, Relay Electrics (#564)

1 – KAWAGUCHI MODEL KM450B 495–TON X 61.6 OZ, PLASTIC INJECTION MOLDING MACHINE, S/N TG–RZ0145, Toggle Clamp, Shot Volume118 Cu. In., Tie Bar Spacing 32” x 32”, Platen Size 46” x 46”, Bright 301 Microprocessor Controls, Hydraulic Eject, Core Pull (#560)

1 – CINCINNATI MILACRON MODEL VT440–29, 440–TON X 29 OZ. PLASTIC INJECTION MOLDING MACHINE, S/N 4039A61/91–34, Toggle Clamp,Tie Bar Spacing 29” x 29”, Platen Size 39” x 39”, CAMAC VEL Microprocessor Controls (Not In Service, Screw Hydraulic Drive Removed) (#550)

1 – CINCINNATI MILACRON MODEL VH400–41–CE 400–TON X 41 OZ. PLASTIC INJECTION MOLDING MACHINE, S/N 3904A21/90–7, HydraulicClamp, Tie Bar Spacing 29” x 29”, Platen Size 41” x 41”, CAMAC XTL Microprocessor Controls (Rob & Heidi Orlaske Estate)

1 – HUSKY MODEL X400P 400–TON PLASTIC INJECTION MOLDING MACHINE, S/N 9027, Hydraulic Clamp, Tie Bar Spacing 24” x 24”, Platen Size38” x 38”, Shut Height 27.5mm Minimum to 800mm Maximum, 30 KW Screw Drive, CNC Controls, Feed Hopper, With Mould–Tek Additive Feeder(Rob & Heidi Orlaske Estate)

1 – KAWAGUCHI MODEL KM360B 397–TON X 42.3 OZ. PLASTIC INJECTION MOLDING MACHINE, S/N RD–RZ0347 (1994), Toggle Clamp, PlatenSize 41” x 41”, Tie Bar Spacing 28” x 28”, Core Pull, Ejector, Bright 301 Microprocessor Controls (#572)

1 – KAWAGUCHI MODEL KM360B 396–TON X 42.3 OZ. PLASTIC INJECTION MOLDING MACHINE, S/N RF–PZ0222, Toggle Clamp, Tie BarSpacing 28” x 28”, Platen Size 42” x 42”, Bright 301 Microprocessor Controls (#540)

1 – TOSHIBA MODEL ISE–390, 390–TON X 63 OZ. PLASTIC INJECTION MOLDING MACHINE, S/N 842470, Hydraulic Clamp, Tie Bar Spacing 28”x 28”, Platen Size 39” x 40”, Injectivisor 5000 Controls (#562)

1 – TOSHIBA MODEL ISGS390, 390–TON X 41 OZ. PLASTIC INJECTION MOLDING MACHINE, S/N 83P075, Hydraulic Clamp, Tie Bar Spacing 28”x 28”, Platen Size 40” x 40”, Injectivisor V10 Microprocessor Control, Core Pull, Ejectors (#552)

1 – NATCO 350–TON X 20 OZ. PLASTIC INJECTION MOLDING MACHINE, S/N 350E–305, Hydraulic Clamp, Platen Size 33” x 34”, Tie Bar Spacing21–1/2” x 21–1/2”, Screw Ram, Maco III Relay Controls (#530)

1 – KAWAGUCHI MODEL KM280B 308–TON X 29 OZ. PLASTIC INJECTION MOLDING MACHINE, S/N PA–MZ0021, Toggle Clamp, Shot Volume45.64 cu. in., Tie Bar Spacing 24” x 24”, Platen Size 35” x 35”, Bright 301 Microprocessor Controls (#541)

1 – HUSKY MODEL XL300RS 300–TON PLASTIC INJECTION MOLDING MACHINE, S/N 8852, Hydraulic Clamp, Tie Bar Spacing 28” x 28”, PlatenSize 41” x 41”, 75 KW Pump Motor, Relay Electrics, Approximately 50–LB. Feed Hopper, With Mould–Tek Additive Feeder & Bunting MagneticSeparator (Rob & Heidi Orlaske Estate)

1 – CINCINNATI MILACRON MODEL ACT300D 300–TON PLASTIC INJECTION MOLDING MACHINE, S/N 4045A02/91–4, Toggle Clamp, Tie BarSpacing 28”H x 24”V, Platen Size 40”H x 36”V (Not Under Power) (#571)

1 – NEW BRITAIN MODEL 300–TR–30, 300–TON X 30 OZ. PLASTIC INJECTION MOLDING MACHINE, S/N 4712–P, Toggle Clamp, Tie Bar Spacing24–1/2” x 24–1/2”, Platen Size 37”H x 38”V, Command II Microprocessor Control (#542)

1 – CINCINNATI MILACRON MODEL VH250–13, 250–TON X 13 OZ. SHOT PLASTIC INJECTION MOLDING MACHINE, S/N H–2A0193012,Hydraulic Clamp, Tie Bar Spacing 22” x 22”, Platen Size 31” x 31”, CAMAC VEL Microprocessor Controls (#544)

1 – CINCINNATI MILACRON MODEL VH250–11, 250–TON X 11 OZ. SHOT PLASTIC INJECTION MOLDING MACHINE, S/N H02A0193004,Hydraulic Clamp, Platen Size 31” x 31”, Tie Bar Spacing 22” x 22”, CAMAC VEL Microprocessor Controls (#543)

1 – STOKES 4–POST VERTICAL CLAMP PLASTIC INJECTION MOLDING MACHINE, S/N N/A, 250–TON x 12 OZ., Horizontal Screw, DistanceBetween Tie Bars 24”LR x 10”FB, Toggle Clamp, Relay Controls, With Feed Hopper & Receiver (#535)

1 – KAWAGUCHI MODEL K180–B 198–TON X 11.97 OZ. PLASTIC INJECTION MOLDING MACHINE, S/N 1L–YY3388, Toggle Clamp, Platen Size29.5” x 27”, Tie Bar Spacing 20” x 17”, Core Pull, Ejector, Microprocessor Controls (#533)

1 – CINCINNATI MILACRON MODEL VT–165–7, 165–TON X 7 OZ. PLASTIC INJECTION MOLDING MACHINE, S/N T36A0396011 (1996), ToggleClamp, Platen Size 26.8” x 25.6”, Tie Bar Spacing 17.9” x 16.7”, Core Pull, Ejector, CAMAC 486 Microprocessor Controls (#523)

CINCINNATIMILACRON MAXIMAMM1100–85,1100–TON X 85 OZ. 3–PLATENPLASTIC INJECTIONMOLDINGMACHINE

1999

CINCINNATIMILACRONMAGNAMH–500–68,500–TON X 68 OZ. 3–PLATENPLASTIC INJECTIONMOLDINGMACHINE

2000

sale to be conducted by

PUBLICAUCTION

THERMOSET INJECTION MOLDERS • PARTS ROBOTS

To schedule an auction, please contact us at 248.254.9999 3

(34) PLASTIC INJECTION MOLDING MACHINES(CONTINUED)

1 – CINCINNATI MILACRON MODEL VT–165–11, 165–TON X 11 OZ. PLASTICINJECTION MOLDING MACHINE, S/N T36A0395092 (1995), Toggle Clamp,Platen Size 46.8” x 25.6”, Tie Bar Spacing 17.9” x 16.7”, Core Pull, Ejector, CAMAC486 Microprocessor Controls (#522)

1 – KAWAGUCHI MODEL KM140B 154–TON X 8.67 OZ. PLASTIC INJECTIONMOLDING MACHINE, S/N JC–QZ0627, Toggle Clamp, Tie Bar Spacing 18” x 18”,Platen Size 26” x 26”, Bright 301 Microprocessor Controls, Core Pull, Ejectors, AirBlow–Off (#570)

1 – CINCINNATI MILACRON MODEL ACT–150B–226, 150–TON X 8 OZ. PLASTICINJECTION MOLDING MACHINE, S/N 4043A01/88–2, Electric Clamp, Platen Size 26”x 26”, Tie Bar Spacing 18” x 18”, Fanuc Autoshot 160B Microprocessor Controls (#521)

1 – CINCINNATI MILACRON/FANUC MODEL ROBOSHOT 110R 110–TON X 3.4 OZ.PLASTIC INJECTION MOLDING MACHINE, S/N 4066A02/97–42 (1997), ElectricClamp, Platen Size 24” x 25”, Tie Bar Spacing 16” x 16”, Fanuc Series 16–i CNCControl (Press #511)

1 – CINCINNATI MILACRON MODEL VT–110–7, 110–TON X 7 OZ. PLASTICINJECTION MOLDING MACHINE, S/N T35A0194045 (1994), Toggle Clamp,Platen Size 24.8” x 22.8”, Tie Bar Spacing 16.14” x 14.17”, 27.5” Daylight, 11.8”Stroke, CAMAC VEL Microprocessor Controls (#520)

1 – VAN DORN MODEL 110–RS–5.5, 110–TON X 5.5 OZ. PLASTIC INJECTIONMOLDING MACHINE, S/N 901100–4, Hydraulic Clamp, Platen Size 27” x 27”, TieBar Spacing 14” x 14”, Path Finder Microprocessor Controls, Feed Hopper (#524)

1 – VAN DORN MODEL 80–RS–5.5, 80–TON X 5.5 OZ. PLASTIC INJECTION MOLDING MACHINE, S/N 9080–1 (1990), Hydraulic Clamp, Platen Size 25” x 25”,Tie Bar Spacing 17–1/2” x 13–1/2”, Path Finder Microprocessor Control (#525)

1 – TRUEBLOOD 75–TON X 5 OZ. VERTICAL CLAMP C–FRAME PLASTIC INJECTION MOLDING MACHINE, S/N NA, Horizontal Injection Barrel, 4–Station42” Diameter Rotary Indexing Table, Barber Colman Analog & Digital TemperatureControls (#513)

1 – NEWBURY MODEL H3–50RS 50–TON X 1.2 OZ. PLASTIC INJECTION MOLDING MACHINE, S/N 10283650S71, Hydraulic Clamp, 16” x 17” Platen Size,Tie Bar Spacing 10” x 12”, Vacuum Receiver (Press #510)

(8) THERMOSET INJECTION MOLDERS1 – HPM/NEW BRITAIN MODEL 400–TS/TP 400–TON 59 OZ. THERMOSET INJECTION MOLDING MACHINE, S/N 4647–P/R96304

(Rebuilt April 1997), Toggle Clamp, Platen Size 40” x 41”, Tie Bar Spacing 26” x 28”, Screw Type Injection, Command 4500Microprocessor Controls (#623)

1 – HPM MODEL T400–55–TS–BMC 400–TON X 55 OZ. THERMOSET INJECTION MOLDING MACHINE, S/N 96194 (1996), ToggleClamp, Platen Size 43” x 43”, Tie Bar Spacing 28” x 28”, Screw Type Injector, Command 4500 Microprocessor Controls (#621)

1 – HPM MODEL 400 TP–52 400–TON X 59 OZ. THERMOSET INJECTION MOLDING MACHINE, S/N 4916–P, Toggle Clamp, PlatenSize 40” x 41”, Tie Bar Spacing 26” x 28”, EPCO E–4000 Microprocessor Controls, Feed Hopper (#622)

1 – HPM MODEL 375, 375–TON X 32 OZ. THERMOSET INJECTION MOLDING MACHINE, S/N R87046/2423P (1969–Rebuilt 1987),Toggle Clamp, Platen Size 37” x 37”, Tie Bar Spacing 22” x 22”, Allen Bradley SLC 5/03 CPU PLC Controls (#612)

1 – NEW BRITAIN MODEL 375–TP–4, 375–TON X 32 OZ. THERMOSET INJECTION MOLDING MACHINE, S/N 1641–P, Toggle Clamp,Platen Size 37.5” x 37.5”, Tie Bar Spacing 22” x 22”, Screw Type Injector, EPCO E–4440 Microprocessor Controls (#620)

1 – HPM–NEW BRITAIN MODEL 300 TP–30/30, 300–TON X 34 OZ. THERMOSET INJECTION MOLDING MACHINE, S/N 5034–P,Toggle Clamp, Platen Size 37” x 37”, Tie Bar Spacing 24–1/2” x 24–1/2”, Vertical Plunger Feed Ram, Command II MicroprocessorControls (#610)

1 – NEW BRITAIN MODEL 300, 300–TON X 24 OZ. THERMOSET INJECTION MOLDING MACHINE, S/N 3195P, Toggle Clamp, PlatenSize 34” x 34”, Tie Bar Spacing 22” x 22”, Allen Bradley SLC 5/01 CPU PLC Controls (#611)

1 – CINCINNATI MILACRON/FANUC MODEL ROBOSHOT 110R 110–TON X 4.8 OZ. THERMOSET PLASTIC INJECTION MOLDINGMACHINE, S/N 4066A02/97–59 (1997), Electric Clamp, Converted, With Thermoset Injection Barrel, Platen Size 24” x 25”, Tie BarSpacing 16” x 16” Fanuc Series 16–i CNC Control (#512)

PARTS ROBOTS1 – AUTOMATED ASSEMBLIES MODEL AZ620 SR M3 OPTIM 3–AXIS CNC SERVO ROBOT, S/N 00–0117/S46542 (2000), Cutler

Hammer Panel Mate Power Pro Hand Held Touch Screen Control, Optimum Servo Controller Console, S/N S–46542 (#574)1 – AUTOMATED ASSEMBLIES MODEL AZ560 SR–M3 EXPRESS 3–AXIS SERVO DRIVE CNC ROBOT, S/N 00–0512, Mfg. No.

S–47870, Cutler Hammer Panel Mate Power Pro Hand Held Touch Screen Control, With Optimum Controller, S/N C–20174, (#561)1 – AUTOMATED ASSEMBLIES MODEL AZ560 EXPRESS 3–AXIS CNC SERVO ROBOT, S/N NA, With Cutler Hammer Panel Mate

Power Pro Hand–Held Touch Screen Control, Optimum Servo Controller, S/N C–20240 (#573)1 – CINCINNATI MILACRON MODEL CMR–560 SR–M3, 3–AXIS CNC SERVO ROBOT, S/N 3937A01/00–51 (2000), Power Pro Panel

Mate Hand Pendant Touch Screen Control (#563)1 – AUTOMATED ASSEMBLIES MODEL AZ460 SR–M3 EXPRESS 3–AXIS CNC SERVO ROBOT, S/N 00–1011, Mfg. No. S–49056,

Cutler Hammer Panel Mate Power Pro Hand–Held Touch Screen Control, With Optimum Servo Controller, S/N S–49056 (#560)2 – CMP–32 SPRUE PICKER PARTS ROBOTS, S/Ns 3937A61/98–1, N/A, Hand Held Microprocessor Control (#s 511 & 512)1 – MARK II AUTOMATION EAGLE MODEL EMC 2000 SPRUE PICKER PARTS ROBOT, S/N NA (#520)

CINCINNATI MILACRON VISTA VT–550–68, 550–TON X 68 OZ. PLASTIC INJECTION MOLDING MACHINE

KAWAGUCHI MODEL KM450B 495–TON X 61.6 OZ, PLASTIC INJECTION MOLDING MACHINE

CINCINNATI MILACRON ACT–150B–226, 150–TON X 8 OZ. PLASTIC INJECTION MOLDING MACHINE

HPM/NEW BRITAIN MODEL 400–TS/TP 400–TON 59 OZ. THERMOSET INJECTION MOLDING MACHINE

AUTOMATED ASSEMBLIES AZ560SR–M3 EXPRESS 3–AXIS SERVO

DRIVE CNC ROBOT

HPM MODEL T400–55–TS–BMC 400–TON X 55 OZ. THERMOSET INJECTION MOLDING MACHINE

HPM–NEW BRITAIN MODEL 300 TP–30/30,300–TON X 34 OZ. THERMOSET INJECTION MOLDING MACHINE

AUTOMATED ASSEMBLIESMODEL AZ620 SR M3 OPTIM3–AXIS CNC SERVO ROBOT

HUSKY MODEL X400P 400–TON PLASTIC INJECTION MOLDING MACHINE

1998

4 For more information, visit www.hilcoind.com or www.maynards.com

MATERIAL DRYERS • HOPPERS & LOADERS • TEMPERATURE CONTROLLLERS

MATERIAL DRYERS2 – NOVATEC MPC–150 MICROPROCESSOR

CONTROLLED DRYERS, S/Ns 3–6523–0673(#15), NA (#5) Model MDC–3000Microprocessor Controls, Portable Base

1 – NOVATEC NPD–100 MICROPROCESSORCONTROLLED DRYER, S/N 3–3162–0982,Relay Electrics, Portable (#17)

1 – NOVATEC MDM–50 MICROPROCESSORCONTROLLED DRYER, S/N 3A095–0498,With Model MPM–Hopper Dryer Hopper, S/N 3A0951–1742, 200–LB. Capacity, ModelVL–4 Proportioning Vacuum Loader Control,S/N VL 4–2720 (#21)

1 – THORENSON MCCOSH THERMAL–D TECHII MODEL TD–40 DEHUMIDIFYING DRYER,S/N 961025, 9.1 KW, Microprocessor Controls

1 – NOVATEC MODEL MDN–25 PORTABLEMATERIAL DRYER, S/N 3–9815–1304(1998), 2.2 KVA, Microprocessor Controls,With Model MDM 100–LB. Capacity DryerHopper, S/N 3–9815–1890

7 – IMS MODEL MD750–50A MATERIAL DRY-ERS, S/Ns 0711, MD75050–0325 (#812),MD75050–0432, 0511, MD75050–0431, 0703,MD75050–0273, 7.5 KW

1 – CINCINNATI MILACRON MODEL MC–DD–60PORTABLE MATERIAL DRYER, S/N 3933A02–97–150 (1997), MicroprocessorControls, With Approximately 100–LB.Capacity Dryer Hopper, Ametek ModelCML–LS45 Vacuum Loader, MagneticSeparator

1 – CINCINNATI MILACRON DD–60 PORTABLEMATERIAL DRYER, S/N 3933A02–98–1,Microprocessor Controls, With Approximately100–LB. Capacity Dryer Hopper, Model CML–MS45 Vacuum Loader, S/N 3934A01–97–184

1 – UNA–DYN MODEL DS DRY SPOT MATERIALDRYER, S/N DS–88270, With 100–LB.Capacity Dry Spot Dryer Hopper, S/N H–10088057 (Mounted on Machine 513)

4 – UNA–DYN MODEL DHD–4 DEHUMIDIFYINGDRYERS, S/Ns DHD–476917 (#13), NA (#14),NA (#16), DHD–476919 (#NA)

Additional Dryer Units Located at WarehouseLocation

HOPPERS & LOADERS1 – NOVATEC MODEL 600# HOPPER COMP. 600–LB. CAPACITY FEED HOPPER, S/N 3–3031–0002 (#530),

With Conair Vacuum Loader, Magnetic Separator 1 – NOVATEC 600–LB CAPACITY FEED HOPPER, MODEL & S/N NA (#542), With NOVATEC Vacuum Loader,

Magnetic Separator, & NOVATEC Model VL–1 Vacuum Loader Control, S/N VL–1–15743 – NOVATEC MODEL NPH HOPPER 400–LB. CAPACITY FEED HOPPERS, S/N 10A540/0827,

10A480–0820 (#552), S/N 10–480–0593 (#543), With NOVATEC Vacuum Loader, Bunting MagneticSeparator, NOVATEC VL–4 Proportioning Vacuum Loader control, S/N VL–4–2832

1 – 400–LB. CAPACITY FEED HOPPER, With NOVATEC Vacuum Loader, Magnetic Separator, NOVATECVL–4 Proportioning Vacuum Loader Control, S/N VL–4–1973 (#565)

2 – NOVATEC MODEL NPH HOPPER 400–LB. CAPACITY FEED HOPPERS, S/N 1A0480–0819 (#574),1A067–0840 (BOTH 1996) (#564), With NOVATEC Vacuum Loader, VL–4 Proportioning Vacuum LoaderControl, Magnetic Separator

2 – NOVATEC MODEL NPH HOPPER 200–LB. CAPACITY HOPPERS, S/N 10–766–1370, S9560 (#525),NOVATEC Vacuum Loader, Bunting Magnetic Separator

1 – THORENSON MCCOSH 160–LB. CAPACITY FEED HOPPER, S/N 9421 (#544), With Thorenson McCoshModel VM–1BR Vacuum Loader, S/N 9610321, Bunting Magnetic Separator

1 – APPROXIMATELY 150–LB. CAPACITY PORTABLE HOPPER, With IMS Model 1500 PLVP WhisperLoader Vacuum Loader, S/N 2586

2 – APPROXIMATELY 100–LB. CAPACITY FEED HOPPERS, With Plastic Process Equipment Vacuum Loader,Maguire MCP–8–34 Concentrate Feeder, S/N 18372, Magnetic Separator (#561), With IMS Model 1500PLVP Whisper Loader Vacuum Loader, S/N 3193 (Mounted on Machine #570)

4 – APPROXIMATELY 75–LB. CAPACITY FEED HOPPERS, With IMS Model 1250 PLVPA Vacuum Loader, S/N 6404, Magnetic Separator (#541), With IMS Vacuum Loader (#533), (Mounted on Machine #523), (#522)

5– AUTO LOAD PLASTI–QUIP VACUUM LOADERS, With Maguire Model MCP–8–34 Concentrate Feeder,S/N 23446 (#572), 18371 (#563), NA (#573), (#560), (#562)

1 – PLASTI–QUIP VACUUM LOADER, S/N NA, With Magnetic Separator (#540)Additional Hoppers & Loaders at Warehouse Location

GRANULATORS1 – CUMBERLAND SIZE 684–GRAN–6KN GRANULATOR, S/N 91000–782, Opening Size 26” x 16”, 40–HP1 – CUMBERLAND MODEL 12 X 20 GRANULATOR, S/N 399683 (1997), 15–HP, Enclosures (#13)4 – CUMBERLAND SIZE 14 X 20 GRANULATORS, S/Ns 35055–6651 (#2), 35055–685 (#7), NA (#4),

35055–6447 (#14), Approximately 10–HP1 – BALL & JEWELL MODEL MC300 GRANULATOR, S/N 6662, MWT 15–HP, 12” x 16” Opening1 – CUMBERLAND MODEL 1215 GRANULATOR, S/N 93450–97506, 12” x 15” Opening, 15–HP3 – IMS MODEL 3144–SP GRANULATORS, S/Ns 341440349 (#9), 341440350 (#21), 341440200 (#1), 10–HP,

12” x 12” Opening1 – RAPID MODEL GK3026K GRANULATOR, S/N 100393, Opening Size 12” x 12”2 – CUMBERLAND SIZE 10 X 12 GRANULATOR, S/N 25086–6638 (#11), 25086–641751 – IMS MODEL 3144SP 10–HP GRANULATOR, S/N 341440355, 12” x 11” Opening (#6)1 – RAPID MODEL 912C GRANULATOR, S/N 305127 (1990), Opening Size 9” x 12” Approximately 7–1/2–HP1 – 10” X 8” GRANULATOR, MFG'R NA, Approximately 5–HP (#566)1 – RAPID MODEL 79K PLASTIC GRANULATOR, S/N 20–1871 (1998), 7” x 8” Opening, HP–NAAdditional Granulators Located at Warehouse Location

THORENSON MCCOSH THERMAL–D TECH II MODEL

TD–40 DEHUMIDIFYING DRYER

NOVATEC MODEL 600#HOPPER COMP. 600–LB.

CAPACITY FEED HOPPER

STERL–TRONIC, CAPITOL, CINCINNATI–MILACRON,THERMAL CARE AQUA–THERM, LOGIC SEAL, QPC &

ADVANTAGE SENTRA TEMPERATURE CONTROLLERS

CENTRAL PROCESS WATER CHILLING/ RECIRCULATION SYSTEM

TEMPERATURE CONTROLLERS1 – MFG'R N/A MODEL TMWH4250 TEMPERATURE

CONTROLLER, S/N 1882059 (#TH555)1 – STERL–TRONIC MODEL S6422A TEMPERATURE

CONTORLLER, S/N 290311 – STERL–TRONIC MODEL 6422S TEMPERATURE

CONTROLLER, S/N 190881 – CAPITOL MODEL 300A/H TEMPERATURE CON-

TROLLER, S/N 118817901 – CINCINNATI–MILACRON MODEL MFCL–75

TEMPERATURE CONTROLLER, S/N3931A04–97–513

1 – STERLCO MODEL 6422E TEMPERATURE CONTROL UNIT, S/N 16745, 9000 Watts PerHeater

2 – THERMAL CARE AQUA–THERM MODELRA090803 TEMPERATURE CONTROL UNITS,S/Ns 4655009961, 4655010961

1 – STERLCO MODEL 6211DX TEMPERATURE CONTROL UNIT, S/N 9382, 9000 Watt Heater

1 – STERL–TRONIC MODEL S6422A TEMPERATURECONTROLLER, S/N 28608, 9000 Watts Per Heater

1 – CINCINNATI MILACRON MODEL MFCL–75 TEMPERATURE CONTROLLER, S/N3931A04–98–9 (1998), 3931A04–98–10 (1998)

1 – LOGIC SEAL MODEL LS–200 TEMPERATURECONTROLLER, S/N 02347

1 – STERL–TRONIC MODEL G412–A TEMPERATURECONTROLLER, S/N 14972, 9000 Watt

2 – QPC MODEL QMC–1110 TEMPERATURE CONTROLLER, S/Ns 339909, 070005

1 – ADVANTAGE SENTRA SK–1075–21C1 TEMPERATURE CONTROLLER, S/N 29828

1 – STERL–TRONIC MODEL F–6026–BX PORTABLETEMPERATURE CONTROLLER, S/N 41177, WattsPer Heater 18,000

1 – PORTABLE TEMPERATURE CONTROLLER,MFG'R N/A, OMRON Digital Temperature Controller

Additional Temperature Controllers Located atWarehouse Location

NOVATEC MODEL NPH HOPPER 400–LB. CAPACITY

FEED HOPPER

VIEW OF CUMBERLAND, BALL & JEWELL, IMS & RAPID GRANULATORS

MCQUAY WGZ055AW27–ER10 WATER COOLEDRECIPROCATING CHILLER/TEMPLIFIER HEAT PUMP

All payments must be madepayable to Maynards.

To schedule an auction, please contact us at 248.254.9999 5

PROCESS WATER COOLING SYSTEM • MILLS • LATHES • GRINDERS

VIEW OF BRIDGEPORT & LAGUN VERTICAL MILLING MACHINES

GIDDINGS & LEWIS/BICKFORD CHIPMASTER 4 ARM X 9” COLUMN RADIAL DRILL

GALLMEYER & LIVINGSTON35, 8” X 24” HYDRAULIC

SURFACE GRINDER

COVEL MODEL 7A 6” X 12” HAND FEED SURFACE GRINDER

LEBLOND MAKINO REGAL SERVO SHIFT 19” X 54” GEARED HEAD ENGINE LATHE

LEBLOND REGAL SERVO SHIFT TOOL & DIEMAKER 19” X 54” GEARED HEAD ENGINE LATHE

WARNER & SWASEY/NORTON 14X36S–1, 14” X 36” HYDRAULIC SURFACE GRINDER

HOT RUNNER TEMPERATURE CONTROLLERS

2 – D–M–E MODEL MFPR–26 2–ZONE ELECTRIC HOT RUNNERTEMPERATURE CONTROLS, S/Ns NA (Missing (1) Zone Panel Each)

1 – D–M–E 8–ZONE ELECTRIC HOT RUNNER TEMPERATURECONTROL, S/N NA (#HT006) (Missing (1) Zone Panel)

1 – D–M–E 15–ZONE ELECTRIC HOT RUNNER TEMPERATURECONTROL, S/N NA (#HT008) (Note: Missing (5) Zone Panels)

1 – D–M–E 12–ZONE ELECTRIC HOT RUNNER TEMPERATURECONTROLLER, MODEL & S/N NA (Note: Missing (4) Zone Panels)

1 – IMS 2–ZONE ELECTRIC HOT RUNNER TEMPERATURE CONTROLLER, S/N 1328, With D–M–E & Athena Circuit Panels

1 – D–M–E MODEL MFP–166 16–ZONE ELECTRIC HOT RUNNER TEMPERATURE CONTROLLER, S/N N/A (Note: Missing (5) Zone Panels)

1 – D–M–E SINGLE ZONE ELECTRIC HOT RUNNER TEMPERATURE CONTROLLER, S/N NA (#HT004)

1 – 10–ZONE ELECTRIC HOT RUNNER TEMPERATURE CONTROLLER, MFG'R NA

BELT CONVEYORS1 – DYNA CON MODEL 48S2806B0 48” WIDE X 14' LONG

HINGED PLASTIC BELT CONVEYOR, S/N 20693701 (1999),Motorized, Reversing, Horizontal Transfer Type, CasterMounted, Partial Plexiglass Enclosure

1 – PLASTIC PROCESS EQUIPMENT MODEL FIC189, 18” X 10' PORTABLE INCLINED BELT CONVEYOR, S/N FTC1890VA2921196

1 – 18” X 7' PORTABLE INCLINED BELT CONVEYOR, MFG'RNA, Plastic Cleated Belt

1 – CINCINNATI–MILACRON MODEL TL–18–10–20, 18” X 10'PORTABLE POWER BELT CONVEYOR, S/N 3939A01–0023,Plastic Belt, Dayton Variable Speed Drive Control

1 – PMI 24” X 9' PORTABLE INCLINED MOTORIZED BELT CONVEYOR, S/N 88016–1–72, Plastic Cleated Belt

1 – 18” X 8' PORTABLE INCLINED BELT CONVEYOR, MFG'RNA, Cleated Belt

1 – PMI 18” X 8' PORTABLE INCLINED BELT CONVEYOR, S/N NA, Cleated Belt

1 – PMI 24” X 8' PORTABLE INCLINED BELT CONVEYOR, S/N NA, Cleated Belt

1 – EMI CORP. MODEL RMC 12–5–20, 12' X 5' PORTABLE BELTCONVEYOR, S/N M9861, With Receiver Hopper, Cleated Belt,Adjustable Incline

1 – EMI MODEL RMC–18–5–20, 18” X 5' PORTABLE BELT CONVEYOR, S/N M–9372, Receiver Hopper, Cleated Belt,Adjustable Incline

PROCESS WATER COOLING SYSTEM1 – CENTRAL PROCESS WATER CHILLING/

RECIRCULATION SYSTEM, With:• (1) McQuay Model WGZ055AW27–ER10 Water Cooled

Reciprocating Chiller/Templifier Heat Pump, S/N STNU010900062 (2002), 300–Ton, McQuayMicro–Tech II PLC Controls

• (1) Process Engineering & Equipment Holding &Recirculation System, With (1) 3' x 8' x 6' High HoldingTank, (1) 10' x 8' x 6' High Holding Tank, (1) SupportTower, (2) 10–HP Recirculation Pumps, (2) 3–HPRecirculation Pumps, (2) 25–HP Recirculation Pumps,(2) 40–HP Recirculation Pumps, (1) MuellerAccu–Therm Model AT80–B20 Plate Type HeatExchanger, S/N G28516, (1) Central Control Panel,With Relay Electrics

• (1) Marley Roof Mounted Water Cooling Tower

MILLING MACHINES1 – BRIDGEPORT SERIES I 2–HP PROGRAMMABLE

VERTICAL MILLING MACHINE, S/N 12BR–193860,Anilam Crusader II Microprocessor Controls, 48” Table

1 – LAGUN MODEL FTV–1 2–HP VARIABLE SPEED VERTICAL MILLING MACHINE, S/N SE 36541, 42”Table, With Servo 140 Power Feed, 4200 RPM,Acu–Rite Mill–Mate 2– Axis Readout

3 – BRIDGEPORT 1–HP 8–SPEED VERTICAL MILLINGMACHINES, S/Ns 12BR–83209, 12BR–71978 withPathfinder 2–Axis Readout, 12BR–139573, 80 – 2720RPM, 42” Table, 4” Column Riser, Acu–Rite 2–AxisReadout

1 – BRIDGEPORT 1/2–HP ROUND RAM VERTICALMILLING MACHINE, S/N 1872, 32” Table, ShaperAttachment

1 – TREE VERTICAL TRACER MILLING MACHINE, S/N 8633, (10) Speeds 60 – 3300 RPM, 48” Table,Scan–O–Matic 3D Hydraulic Tracer Attachment

1 – KEARNEY & TRECKER MILWAUKEE MODEL D #2ROTARY HEAD MILLING MACHINE, S/N 1–6612, (15)Spindle Speeds 250 – 4000 RPM, Power Feeds, 16” x30” Table, Coolant

1 – LAGUN MODEL FTV–1 2.2 KW VARIABLE SPEED VERTICAL MILLING MACHINE, S/N NA, 42” Table,With Servo 140 Power Feed

1 – KEARNEY & TRECKER MILWAUKEE MODEL10HP–3CH PLAIN HORIZONTAL MILLING MACHINE,S/N 26–7288, 15 – 1500 RPM Spindle Speeds, 13–1/2”x 64” Table, Right Angle Attachment

1 – BRIDGEPORT VERTICAL MILLING MACHINE, S/N 12BR–146531, 42” Table, 7” Riser (Missing Motor)

DRILLS1 – GIDDINGS & LEWIS/BICKFORD CHIPMASTER 4 ARM X 9” COLUMN RADIAL DRILL,

S/N 2R69, (9) Spindle Speeds 90 – 1800 RPM, 20” x 40” T–Slotted Base, Power Clamp& Elevate, Plain Box Table

1 – AMERICAN HOLE–WIZARD 4' ARM X 11” COLUMN RADIAL DRILL, S/N 1002, (12)Spindle Speeds 70 – 2100 RPM, 36” x 57” T–Slotted Base, Plain Box Table

1 – AVEY MODEL 3, 24” SLIDING HEAD BOX COLUMN DRILL, S/N 32376, (6) Spindle Speeds 95 – 1130 RPM, Power Feed, 25” x 32” Table

1 – ROCKWELL 20” FLOOR TYPE DRILL PRESS, S/N 1740124, Variable Speeds 230 – 4250 RPM1 – DELTA MODEL 20 CAT. NO. 70 – 230, 20” FLOOR TYPE DRILL PRESS,

S/N 86D72004, (8) Step Pulley Speeds 125 – 1400 RPM, Rockwell Pneumatic Power Down Feed1 – ROCKWELL MODEL 17–600, 17” FLOOR TYPE DRILL PRESS, S/N 14458831 – POWERMATIC 1150, 15” FLOOR TYPE DRILL PRESS, S/N 5–5476–1, Variable Speeds

238 – 4800 RPM1 – ROCKWELL 15–097, 15” FLOOR TYPE DRILL PRESS, S/N GU 521173 A852 – MANHATTAN MODEL 951225, 14” FLOOR TYPE DRILL PRESSES,

S/Ns 238905, 2389211 – ROCKWELL MODEL 15–017, 15” FLOOR TYPE DRILL PRESS, S/N 14286661 – SUN MODEL SF–15, 15” FLOOR TYPE DRILL PRESS, S/N 401471 – CUSTOM BUILT SINGLE SPINDLE VERTICAL PRODUCTION DRILLING MACHINE,

With Hy–Pneumat Model D036E–16508–B Drill Head (#34)

LATHES1 – LEBLOND MAKINO REGAL SERVO SHIFT 19” X 54” GEARED HEAD ENGINE

LATHE, S/N 14E–449, Spindle Speeds 40 – 1600 RPM, Quick Change Threading, 3”Hole–Thru Spindle, 2–Axis Readout, Coolant, 3 & 4 Jaw Chucks

1 – LEBLOND REGAL SERVO SHIFT TOOL & DIE MAKER 19” X 54” GEARED HEADENGINE LATHE, S/N 5HD206, Spindle Speeds 20 – 2010 RPM, Quick ChangeThreading, Taper Attachment, 1–5/8” Hole–Thru Spindle, 3–Jaw Chuck

1 – MONARCH MODEL 18CBB 20.5” X 72” GEARED HEAD ENGINE LATHE, S/N 25555, (16) Spindle speeds 12 – 487 RPM, Quick Change Threading, TaperAttachment, 1–1/2” Hole–Thru Spindle, 4–Jaw Chuck

1 – HENDEY MACHINE CO. 14” X 30” GEARED HEAD ENGINE LATHE, S/N 30846/8–64, (18) Spindle Speeds 19 – 1000 RPM, Quick Change Threading, 1–1/2”Hole–Thru Spindle, 3–Jaw Chuck

1 – HARDINGE DV–59 DOVETAIL BED TOOLROOM LATHE, S/N DV–59–11471, Variable Speed1 – HARDINGE DV–59 DOVETAIL BED SECONDARY TOOLROOM LATHE, S/N DV59–4160–3

SURFACE GRINDERS1 – WARNER & SWASEY/NORTON MODEL 14X36S–1, 14” X 36” HYDRAULIC SURFACE

GRINDER, S/N N–229, Electromagnetic Chuck, Coolant1 – ABRASIVE MODEL 1218, 12” X 18” HYDRAULIC SURFACE GRINDER, S/N 1218–163,

Electromagnetic Chuck, Coolant1 – GALLMEYER & LIVINGSTON MODEL 35, 8” X 24” HYDRAULIC SURFACE GRINDER,

S/N S35783, Electromagnetic Chuck (Located in New Buffalo, MI)1 – GALLMEYER & LIVINGSTON GRAND RAPIDS MODEL 260, 8” X 18” HYDRAULIC

SURFACE GRINDER, S/N 260227, Electromagnetic Chuck, Coolant, Dresser1 – KENT MODEL KGS–200, 6” X 12” HAND FEED SURFACE GRINDER, S/N 86106,

Electromagnetic Chuck, With Variable Control, Manual Overhead Dresser, External Coolant Unit1 – COVEL MODEL 7A 6” X 12” HAND FEED SURFACE GRINDER, S/N 7A–6405,

Permanent Magnetic Chuck

6 For more information, visit www.hilcoind.com or www.maynards.com

SAWS • EDMS • QUALITY CONTROL • AIR COMPRESSORS

MISCELLANEOUS GRINDERS1 – NORTON 10” X 24” OD/ID UNIVERSAL GRINDER, S/N P2420, Motorized Work Head, With 6” 4–Jaw

Chuck, Swing–Down Belt Driven ID Spindle, Coolant1 – FAMCO MODEL 375–LG CUTTER GRINDER, S/N 91E–769071 – DECKEL SO SINGLE LIP TOOL GRINDER, S/N 59–17481 – COVEL MODEL FP–PT–A YANKEE DRILL POINT GRINDER, S/N 20341 – K.O. LEE MODEL B300 X TOOL & CUTTER GRINDER, S/N 15185CL, Double–End Wheel Head,

Cabinet Base1 – MFG'R NA MODEL SM6015 SINGLE LIP TOOL & CUTTER GRINDER, S/N 010404

SAWS1 – DOALL MODEL C916M SEMI–AUTOMATIC HORIZONTAL BANDSAW, S/N 527–011478 (2001),

Manual Clamp, Coolant1 – W.F. WELLS MODEL F–15, 12” X 16” HORIZONTAL METAL CUTTING BANDSAW, S/N 811729,

2–Post Frame, Manual Clamp, Coolant1 – DOALL 26” VERTICAL METAL CUTTING BANDSAW, S/N 26441119, Blade Speeds 0 – 1600 FPM,

Blade Welder/Grinder, Power Table Feed1 – WALKER TURNER MODEL 3210, 14” VERTICAL BANDSAW, S/N NA1 – CRAFTSMAN 10” TABLE SAW, S/N NA, Adjustable Fence

PARTS CLEANING MACHINES1 – JET WHEEL BLAST EQUIPMENT MODEL DB21A CONVEYORIZED THRU–FEED ABRASIVE

BLAST CLEANING MACHINE, S/N JW90195 (1995), 7–1/2”–HP Shot Wheel, 18” Wide Wire MeshConveyor, Shot Reclaim System, Floor Standing

1 – HUNZIKER MODEL SBS–1502 TUMBLE TYPE PARTS DEFLASHING MACHINE, S/N 832031210,650 Parts/Hour Rating, 6” x 8' Inclined Power Infeed Conveyor, 12” Diameter Finished Parts RotaryOutfeed Conveyor, Dust Collector

1 – WHEELABRATOR TUMBLAST BLAST CLEANING MACHINE, S/N A83180, Chamber Size 28” x 19”Diameter, Rubber Belt, Manual Door, Single Wheel, Self–Contained Media Reclaim System

1 – WHEELABRATOR CENTRALIZED DUST COLLECTOR, S/N NA, 2–Hopper Bottom Discharge(Outside)

1 – WHEELABRATOR TUMBLAST ABRASIVE BLAST CLEANING MACHINE, S/N NA, 26” Wide x 20”Diameter Chamber, Rubber Belt, Shot Reclaim System, Dust Collector (Located in New Buffalo, MI)

HYDRAULIC TRYOUT PRESS1 – DAKE MODEL 27–121, 50–TON 4–POST HYDRAULIC DIE TYROUT PRESS, S/N 141387, 30” x 30”

Between Posts, 32”LR x 26”FB Bolster, Top–Mounted Hydraulics

ELECTRICAL DISCHARGE MACHINES1 – ELOX MODEL HRP102C RAM TYPE ELECTRICAL DISCHARGE MACHINE,

S/N 293, Work Tank Size 21” x 36” x 12”, Travels 12” X, 18” Y, 12” Z, Futaba 3–Axis Readout, XermacHP30 Power Supply

1 – HANSVEDT MODEL SM–150B BENCH TYPE ELECTRICAL DISCHARGE MACHINE, S/N B05187,6” x 12” Worktable, System 3R Rotary Work Head, SM–150B 30 Amp Power Supply, Acu–Rite 3–AxisReadout

QUALITY CONTROL1 – BROWN & SHARPE MICROVAL BENCH TYPE COORDINATE MEASURING MACHINE, S/N NA, 22” x 30”

Granite Table, Renishaw TP–ES Probe1 – SHEFFIELD CORDAX MODEL 1808 MEA COORDINATE MEASURING MACHINE, S/N 5997–1089 (1989), 30”

x 54” Black Granite Surface Plate, Renishaw Probe, 4–Axis Readout, Computer Control1 – JONES & LAMSON CLASSIC 120, 20” OPTICAL COMPARATOR, S/N EC5061, Power Table Travel/Elevation,

Nova Light Projection Unit, 2–Axis Readout1 – SUBURBAN TOOL MASTER VIEW 14” OPTICAL COMPARATOR, S/N 1425–9707M1 – COVEL 14” OPTICAL COMPARATOR, S/N 14–11921 – TINIUS OLSEN EXTRUSION PLASTOMETER, S/N 147605, Model UE–4–78 Digit Set Controller, Model DS–5

Data System1 – TINIUS OLSEN MODEL 5000 TENSILE TESTER, S/N 1561811 – COMPUTRAC MAX–2000 PROGRAMMABLE MOISTURE ANALYZER1 – OMNIMARK MARK 2 HIGH PERFORMANCE PROGRAMMABLE MOISTURE ANALYZER2 – BLUE M MODEL OV–490A–2 STABIL–THERM ELECTRIC LAB OVENS, S/N OV3–23243, OV3–23236, 600

Degrees Fahrenheit, 1600 Watt, 19” x 15” x 18”, Power–O–Matic 70 Control1 – THERMOLYNE MODEL 1400–FB1415M ELECTRIC LAB OVEN, S/N 34800750, 1500 Watt, 4–1/2” x 6” x 4–1/2”1 – NEY MODEL 2–525 BENCH TOP ELECTRIC LAB OVEN, S/N NA, 9” x 9” x 6”1 – HIPTRONICS HIGH VOLTAGE AC DIELECTRIC TEST SYSTEM, S/N NA, Electrostatic Voltmeter1 – 24” X 36” X 4” BLACK GRANITE SURFACE PLATE1 – WILSON MODEL 4JR–PL ROCKWELL HARDNESS TESTER, S/N 4JR–PL3285Miscellaneous Inspection Equipment Including: Pin Gages, Gage Blocks, Indicators, Level, Calipers, Micrometers, etc.

WELDERS1 – MILLER SYNCROWAVE 250 DX WELDING POWER SUPPLY, S/N LF076337 (2005), Built–In Water Cooler, Tig

Welding Leads1 – MILLER DIALARC HF CONSTANT CURRENT AC/DC WELDING POWER SUPPLY, S/N JG089628, 250 Amp

Maximum Output, With Radiator 1 Water Cooling System, Tig Welding Leads1 – MILLER MODEL 330A/BP WELDING POWER SUPPLY, S/N U4816101 – MILLER RAMROD 200 AMP DC SHIELDED METAL ARC WELDING POWER SUPPLY, S/N JB4757982 – LINCOLN IDEALARC 250 DC ARC WELDERS, S/Ns AC245073, AC1147001 – LINCOLN SAE 600, 600 AMP GENERATOR TYPE ARC WELDER, S/N A3867521 – TAYLOR WINFIELD 20 KVA ROCKER ARM SPOT WELDER, S/N NA

AIR COMPRESSORS & RELATED EQUIPMENT1 – INGERSOLL RAND MODEL SSR–EP125, 125–HP ROTARY SCREW AIR COMPRESSOR, S/N F38610U02340

(2002), Water Cooled, 571 CFM, 125 PSIG, Sound Enclosure Panels, Intellisys Microprocessor Controls1 – KAESER MODEL BS61, 50–HP ROTARY SCREW AIR COMPRESSOR, S/N 5103197, 240 CFM, 110 PSIG,

Sound Enclosure Panels1 – GARDNER DENVER MODEL EJBRFA 25–HP HORIZONTAL TANK MOUNTED ROTARY SCREW AIR

COMPRESSOR, S/N M486591 – INGERSOLL RAND T30 MODEL 223X5, 5–HP TWO–STAGE AIR COMPRESSOR HEAD & MOTOR, S/N 30T

908112, Base Mounted (No Tank)1 – ARROW PNEUMATICS MODEL A–100–1 REFRIGERATED COMPRESSED AIR DRYER, S/N LH214, 100 SCFM1 – SULLAIR MODEL SRD 105 REFRIGERATED COMPRESSED AIR DRYER, S/N 003–D54171 – ULTRA AIR MODEL NA REFRIGERATED COMPRESSED AIR DRYER, S/N U00859

DOALL C916M SEMI–AUTOMATICHORIZONTAL BANDSAW

INGERSOLL RAND MODEL SSR–EP125, 125–HPROTARY SCREW AIR COMPRESSOR

DAKE 27–121, 50–TON4–POST HYDRAULIC DIE

TYROUT PRESS

BROWN & SHARPE MICROVAL BENCHTYPE COORDINATE MEASURING MACHINE

ELOX HRP102C RAM TYPEELECTRICAL DISCHARGE

MACHINE

HANSVEDT SM–150B BENCHTYPE ELECTRICAL

DISCHARGE MACHINE

JONES & LAMSON CLASSIC 120, 20”

OPTICAL COMPARATOR

SHEFFIELD CORDAX MODEL 1808 MEACOORDINATE MEASURING MACHINE

2002

2001

To schedule an auction, please contact us at 248.254.9999 7

FORKLIFTS • VEHICLES • CRANES & HOISTS

FORKLIFTS & ACCESSORIES1 – CLARK MODEL CGC70, 15,000–LB. CAPACITY

FORKLIFT, S/N CGC470L–0019–6886FB, LPG, SolidTires, 189” Lift, Genesis Series 3–Stage Clear–ViewMast, Side Shift, Overhead Tilt Cylinders, 48” Forks(Approximately 0460 Hrs.)

1 – DAEWOO MODEL GC–18S–2, 3500–LB, CAPACITYFORKLIFT, S/N C2–00020, LPG, Solid Tires, 189” Lift,3–Stage Mast, Side Shift, 48” Forks (@ 4500 Hrs.)

1 – CLARK MODEL ECS 27 SIT–DOWN RIDER TYPEELECTRIC FORKLIFT, S/N NA, APPROXIMATELY3000–LB. Capacity, 3–Stage Mast, Side Shift, 48” Forks

1 – CLARK MODEL TM15, 2800–LB. CAPACITYSIT–DOWN RIDER ELECTRIC FORKLIFT, S/NTM247–0516–684, 3–Wheel Chassis, 170” Lift,3–Stage Mast, 42” Forks, 36–Volt

1 – CLARK MODEL TM15, 2575–LB. CAPACITYSIT–DOWN RIDER ELECTRIC FORKLIFT, S/N TM247–0268–7875FB, 3–Wheel Chassis, 170” Lift,3–Stage Mast, Side Shift, 42” Forks, 36–Volt

1 – CLARK MODEL CMC 15L 2200–LB. CAPACITYFORKLIFT, S/N CMC158L–1196–6853KF, LPG, SolidTires, 189” Lift, 3–Stage Mast, Side Shift, 42” Forks(7570 Hrs.)

1 – CLARK MODEL TM15, 2150–LB. CAPACITYSIT–DOWN RIDER ELECTRIC FORKLIFT, S/N TM247–0101–6840FA, 3–Wheel Chassis, 170” Lift,3–Stage Mast, 36–Volt

1 – CLARK MODEL C20, 2000–LB. CAPACITY FORK-LIFT, S/N C20B–764–2080, LPG, Solid Tires, 130” Lift,2–Stage Mast, 42” Forks

1 – CLARK MODEL ST20, 2000–LB. CAPACITYWALK–BEHIND ELECTRIC FORKLIFT, S/NST245–152–2224, 108” Lift, 24–Volt

1 – LEWIS SHEPARD JACK STACKER TYPE E4SST–36,4000–LB. CAPACITY WALK–BEHIND ELECTRIC FORKLIFT, S/N JS5674

1 – HERTNER AUTO 5000 MODEL 3TD18–865,36–VOLT/195 AMP INDUSTRIAL FORKLIFT BAT-TERY CHARGER, S/N 0H34541

1 – CALDWELL MODEL PB–40, 4000–LB. CAPACITYTELESCOPIC FORKLIFT JIB BOOM ASSEMBLY, S/N 83919, 1500–LB. Capacity at 12'

1 – TELESCOPIC BOOM FORKLIFT JIB ATTACHMENT

SCISSORS LIFT WORK PLATFORM1 – ECONOMY CUB XT MODEL CS–2033XT BATTERY

POWERED SCISSORS LIFT WORK PLATFORM, S/NGJ–74563, 20' Maximum Lift Height, 500–LB. Capacity,24–Volt, Built–In Charger, 28” x 90” Platform, 36”Platform Extension

VEHICLES1 – 2000 FORD F650 XLT SUPER DUTY SINGLE AXLE

BOX VAN TRUCK, VIN: 3FDNF65YXYMA42170,Cummins 1SB 240 Diesel, 6–Speed, 26,000–LB.GVWR, 8500–LB. Front/17,500–LB. Rear, HydraulicBrakes, Supreme 26' FRP Box Van Body, Roll–Up Door,Landing Gear Support Legs, 10:00 R22.5 Tires, AirConditioning (343,173 Miles)

1 – 1996 FORD F700 SINGLE ANLE BOX VAN TRUCK,VIN: 1FDNF70JXTVA16800, V–8 Gas, 6–Speed,26,000 GVWR, 7000–LB. Front/19,000–LB. RearHydraulic Brakes, Supreme 22' FRP Van Body, Roll–UpDoor, Air Conditioning, 10R22.5 Tires (203,815 Miles)

1 – 1985 GMC 7000 SINGLE AXLE BOX VAN TRUCK,VIN: 1GDL7D1E3FV501997, V–8 Gas, 5–Speed,28,000 GVWR, 9000–LB. Front/19,000–LB. Rear,Hydraulic Brakes, Supreme 20' Aluminum Van Body,Roll–Up Door

1 – 1995 FORD F150 XL PICK UP TRUCK, VIN: 1FTDF15Y6SLA16628, 4.9 L–6 Gas Engine,5–Speed, Standard Cab, Dual Tanks, Air Conditioning

1 – 1997 FORD TAURUS GL 4–DOOR SEDAN, S/N 1FALP520XV G140454

WAREHOUSE & PACKAGING EQUIPMENT1 – RACK ENGINEERING ADJUSTABLE PALLET RACKING, (12) SECTIONS, Boltless Shelf

Type 100” Wide x 40” Deep x 10' High, 2–Tier, Drop Hock Type Cross Beams, StructuralChannel Steel Cross Beams, Plywood Decks

1 – LANTECH LAN–WRAPPER V–SERIES MODEL SVGSS06501601 PALLET SHRINK WRAPMACHINE, S/N 17355, 48” x 48” Table, 60” Vertical

1 – HIGHLIGHT INDUSTRIES SYNERGY 3–SEMI AUTOMATIC PALLET SHRINK WRAPMACHINE, S/N K294–009–4465A1, Allen Bradley SLC500 PLC Control, 72” Vertical, 48” x 48”Table

1 – BEST PACK 1AS–75R CARTON SEALER, S/N 941065 (1994), Top & Bottom Tape Applicators,Roller Conveyor, With Adjustable Power Belt Side Conveyors, 18” Maximum Width (Rob & HeidiOrlaske Estate)

1 – LITTLE DAVID CARTON SEALER, MODEL & S/N NA, Top & Bottom Tape Applicators,Motorized Conveyor

1 – STANLEY BOSTITCH MODEL FC95EC ELECTRIC FLOOR TYPE CARTON STAPLER, S/NM–11483,

2 – ACME FLOOR TYPE ELECTRIC CARTON STITCHERS, S/Ns N/A1 – TOLEDO FLOOR STANDING ELECTRONIC PLATFORM SCALE, Converted Mechanical, 48”

x 60” Platform, 5000–LB. Capacity, 1–LB. Increments, With B–Tek Bullseye ProgrammableReadout/Counting Scale, Counting Scale Capacity 50–LB. x .005–LB.

1 – METTLER TOLEDO ELECTRONIC BENCH SCALE2 – METTLER TOLEDO MODEL 1938, 50–LB. CAPACITY ELECTRONIC BENCH SCALES,

S/Ns 2692577–2RV, 2762373–2RV1 – TOLEDO MODEL 2181, 1000–LB. CAPACITY MECHANICAL PLATFORM/COUNTING

SCALE, S/N 17233, Dial Face, Portable1 – METTLER TOLEDO MODEL C–30 ELECTRONIC BENCH SCALE, S/N 5003130–5NZ,

Capacity 60 x 0.01–LB., With Remote Keyboard Type Programmable Readout1 – TOLEDO MODEL 8582, 50–LB. CAPACITY ELECTRONIC BENCH SCALE, S/N 2483081–20R1 – TOLEDO MODEL 8582, 100–LB. CAPACITY ELECTRONIC BENCH SCALE,

S/N 2765392–2SV1 – METTLER TOLEDO MODEL 1938, 50–LB. CAPACITY ELECTRONIC BENCH SCALE,

S/N 2940602–2QY, Portable Steel Cart Mounted1 – DATAMAX I CLASS BAR CODE LABEL PRINTER

MISCELLANEOUS MACHINERY1 – RIDGID MODEL 400 POWER PIPE THREADER, S/N NA1 – RIDGID MODEL 300 POWER PIPE THREADER1 – COLL–O–CRIMP MODEL T–400 HYDRAULIC HOSE CRIMPING PRESS, S/N NA, With

Hydraulic Unit, Beverly Hand Shear, Cut–Off Saw, Cart1 – PEXTO MODEL 137L 36” X 16 GAUGE FOOT SHEAR, S/N 179311821 – PEXTO MODEL 390–P 36” 16–18 GAUGE SLIP ROLLS, S/N 127601 – DRIES & KRUMP CHICAGO MODEL L–30, 36” FINGER TYPE HAND BENDING BRAKE, S/N

969661 – 20–TON H–FRAME HYDRAULIC SHOP PRESS1 – ATLAS NO. 4 ARBOR PRESS1 – DEE–BLAST 44” X 36” ABRASIVE BLAST CABINET, S/N DB10854, 3–Bag Dust Collection1 – HUPPERT MODEL ST ELECTRIC BOX FURNACE, S/N 83, 2000 Degree Fahrenheit, 14” x 16”

x 24”, 15 KW, Honeywell Digital Heat Controls1 – HUPPERT MODEL ST ELECTRIC BOX FURNACE, S/N 143, 1500 Degrees Fahrenheit, 8” x

10” x 20”, 10 KW1 – DAKE MODEL 25H 25–TON H–FRAME HYDRAULIC SHOP PRESS, S/N 147655, Manual1 – GORTON MODEL P2–3, 3D PANTOGRAPH ENGRAVER, S/N 378431 – NATCO 4–POST VERTICAL 500–TON HYDRAULIC COMPRESSION MOLDING PRESS, S/N

NA, Bed Size 30”LR x 26”FB, Floor Standing, Self–Contained (Located in New Buffalo, MI)1 – EVANS STEWART & CO. MODEL 00 1/4” CAPACITY ROTARY FINE BRUSHER/SAMPLER,

S/N 1285 (#10)3 – LOGAN MODEL D–2500, 125–TON CAPACITY PRE–FORM BRIQUETTING PRESSES, S/Ns

NA, 2–1/4” Diameter Puck Size2 – COTTERMANN DRUMASTER BATTERY POWERED HYDRAULIC DRUM TILTERS, S/Ns NA,

Portable1 – LOCTITE MODEL 400mi PNEUMATIC APPLICATOR GUN, P/N 983439, With Assembly Bench1 – DUKANE MODEL 43A175 ULTRA 1000 AUTO TRAC ULTRASONIC WELDER POWER SUP-

PLY, S/N US 80093, With Hand Held Spot Type Welding Gun, S/N US 1465381 – SERVICE TECTRONICS INC. PAT–A–PRINT MODEL 802 PAD PRINTER, S/N 5144–684, With

10” Vibratory Bowl Feeder1 – 8' X 16' X 8–1/2' HIGH FREE–STANDING MODULAR OFFICE ALL–AROUND WINDOWS, (1)

Access Door, Window A/C Unit1 – 8' X 20–1/2' X 8' HIGH FREE–STANDING 2 OFFICE MODULAR OFFICE STRUCTURE,

Windows, (1) 8' x 9–1/2' Office, (1) 8' x 10' Office, Each, With Window A/C Unit1 – 20–HP PORTABLE ELECTRIC HYDRAULIC POWER UNIT, With Control Valves & Hoses1 – 15–HP PORTABLE ELECTRIC HYDRAULIC POWER UNIT, With Control Valves & Hoses2 – 10–HP PORTABLE ELECTRIC HYDRAULIC POWER UNITS, With Control Valves & Hoses

VIEW OF CLARK & DAEWOOO FORKLIFTS TO 15,000-LBS.

3–TON X 10–1/2' SPAN UNDERSLUNG BRIDGE CRANE

PROCESS STEAM BOILERS1 – VA POWER MODEL TRG–5901–Y2HJ–300 STEAM

BOILER, S/N 17385, Natural Gas or Oil Fired, 300–HP,25 PSI W.P.

1 – CYCLOTHERM MODEL 300G–06N–23A NATURALGAS FIRED STEAM BOILER, S/N NA, 300–HP, 300PSI W.P.

1 – STEAM CONDENSATE SYSTEM

CRANES & HOISTS1 – LOAD LIFTER 8–TON X 12' SPAN UNDERSLUNG

SINGLE GIRDER BRIDGE CRANE, With CM Cyclone8–Ton Manual Chain Fall, Manual Bridge & TrolleyTravels, Approximately 70' Suspended Runway Rails

1 – TM 5–TON X 20' SPAN TOP RIDING SINGLE GIRDERBRIDGE CRANE, S/N 14826, CM Powerstar 5–TonElectric Chain Hoist, 6–Way Power Travel, PendantControl

1 – BUDGIT 3–TON MANUAL CHAIN FALL, WithApproximately 20' Long 2–Post Free–Standing I BeamMonorail, 13–1/2' Under Rail

1 – 5–TON X 28' SPAN TOP RIDING SINGLE GIRDERBRIDGE CRANE, S/N 911735, Shaw Box ElectricCable Hoist, 6–Way Power Pendant Controls, Class B,Single Speed, 90' Runway Rails (Located in NewBuffalo, MI)

1 – 5–TON X 28' SPAN TOP RIDING SINGLE GIRDERBRIDGE CRANE, Budgit 5–Ton Manual Chain Fall,Manual Travels (Located in New Buffalo, MI)

1 – 3–TON X 10–1/2' SPAN UNDERSLUNG SINGLE GIRD-ER BRIDGE CRANE, S/N 911705, Class B, BudgitElectric Chain Hoist, Manual Bridge & Trolley Travel, 15'Under Rail, 20' Free Standing Runway Structure(Located in New Buffalo, MI)

1 – JET 5–TON MANUAL CHAIN FALL, WithApproximately 30' I Beam Monorail

1 – JET 2–TON MANUAL CHAIN FALL, WithApproximately 60' I Beam Monorail

1 – BUDGIT 3–TON ELECTRIC CHAIN HOIST (Located inNew Buffalo, MI)

1 – BUDGIT 2–TON ELECTRIC CHAIN HOIST, With PowerTrolley (Located in New Buffalo, MI)

2 – BUDGIT & CM 2–TON ELECTRIC CHAIN HOISTS(Located in New Buffalo, MI)

1 – BUDGIT 1–TON ELECTRIC CHAIN HOIST, With 40'Suspended I Beam Monorail

1 – JET 2–TON CHAIN FALL1 – CM 2–TON CHAIN FALL3 – BUDGIT 2–TON CHAIN FALLS1 – 3–TON X 20' SPAN UNDERSLUNG SINGLE GIRDER

BRIDGE CRANE, Budgit 3–Ton Electric Chain Hoist,Manual Travels

1 – 2–TON X 20' SPAN UNDERSLUNG SINGLE GIRDERBRIDGE CRANE, Budgit 2–Ton Manual Chain Fall,Manual Travels

2 – 2–TON X APPROXIMATELY 18' SPAN UNDERSLUNGSINGLE GIRDER BRIDGE CRANES, With Budgit2–Ton Manual Chain Falls, Manual Travels

SHOP & FACTORYLarge Quantity Maintenance & Repair Parts, Storeroom Crib,General Shop & Factory Equipment, Double–End Grinders,Hand & Power Tools, etc.

MATERIAL INVENTORY & MOLDSOver (50) Gaylord Boxes of Assorted Plastic MaterialOver (100) Assorted Molds

OFFICESQuantity of Office Equipment Including: Computers, Printers,Copiers, Fax, Plotters, General Business Machines, OfficeFurniture

5–TON X 28' SPAN TOP RIDING SINGLE GIRDER BRIDGE CRANE

Headquarters31555 W. Fourteen Mile Road, Suite 207Farmington Hills, MI 48334Ph: 248.254.9999Fx: 248.254.9995www.hilcoind.com

Forwarding Service Requested

PresortedFirst Class MailU.S. Postage

PAIDDetroit, Mich.

Permit No. 100

Hilco Industrial, LLCA u c t i o n e e r s • L i q u i d a t o r s • A p p r a i s e r s

PUBLIC AUCTION

HILCO Industrial, LLC is a division of Hilco Trading, Co. • Headquarters 5 Revere Drive, Ste. 430 • Northbrook, IL 60062All rights reserved • Printed in USA • MODE3342 • IL License #444000215

Please visit our website at www.hilcoind.com to review our complete terms and conditions.

Terms of SaleA buyer’s premium of 13.5% for onsite sales & 16%for webcast sales is in effect. Everything will be soldto the highest bidder for cash, in accordance with theAuctioneer’s customary “Terms of Sale”, copies ofwhich will be posted on the premises of the sale andsubject to additional terms announced the day ofsale. All items will be sold “as is, where–is” without any warranties, express or implied. Althoughobtained from sources deemed reliable, theAuctioneer makes no warranty or guarantee to theaccuracy of the information herein contained. Biddersare encouraged to thoroughly inspect the items onwhich they intend to bid prior to sale. Absolutely noitems will be removed until the day after the conclu-sion of the sale and payment is made in full. Subjectto additions, deletions and prior sale. For full termsand conditions please go to www.maynards.com

Payment: ALL PURCHASES MUST BE PAID INFULL ON THE DAY OF THE AUCTION. If you intendto pay by wire transfer, we will accept payment theday after the sale ONLY IF a deposit of 25% of totalpurchases is made on the day of the sale. Contactour office for wire transfer instructions. Only cash,wire transfer or certified check, payable to Maynardswill be accepted. Company checks payable toMaynards will be accepted only if accompanied by abank letter of guarantee, (see sample letter below).All sales are subject to sales tax. Purchasers claiming exemptions from taxes must provide proofsatisfactory to the Auctioneer of their entitlement toclaim such exemptions.

Sample Bank Letter(Bank Name) unconditionally guarantees payment to Maynards from (Company Name).This guarantee will be valid for purchasesmade at the Auction of Modern PlasticsCorporation on October 1, 2008

Atlanta • Birmingham • Boston • Charlotte • Chicago • Dallas • Detroit • Grand Rapids • Guadalajara (MX) • Hong Kong • Irapuato (MX) • Leeds (UK)London (UK) • Los Angeles • Mexico City (MX) • Monterrey (MX) • New York • San Francisco • Southampton (UK) • Toronto • Villahermosa (MX)

By order of the secured creditors, assets of