Upload
others
View
11
Download
0
Embed Size (px)
Citation preview
2003/10/15
Mechanical Force Gauge IMADA CO.,LTD. 1/6
-------------------------------------------------------------------------------------------------------------------------------------------------
PPSSSS//PPSS//PPSSMM//FFBB//FFSS SSeerriieess
Mechanical Force Gauge
PSM FB
PS FB-KITS [Application] Measuring of the contact pressure for touch panel or keyboard Measuring of the bonding strength of adhesive tapes and the peel strength of adhesive sheets
*Digital force gauges are more suitable for measuring rapid change of the force such as impact test
[Feature] All models are equipped with Peak Hold function which captures peak force. Zero adjustment function for tare weight allows the adjustments of attachment’s weight.
2003/10/15
IMADA CO.,LTD. 2/6
[PSS/PS/PSM/FS/FB Series Specification]
Model PSS PS PSM FS FB
Stroke 10 mm
Measuring units Refer to the following tables
Display features Track and peak mode (Selectable)
Graduation 100 lines* 200 lines ** 100lines *
Accuracy +/-0.1% of F.S +/-0.3% of F.S
Operating temperature range
0~+40 degree Celsius
Weight 530 g 600 g 530 g 600 g
Accessories 8 attachments Carrying case
6 attachments Carrying case
* 120 lines for 3K, 30K, 300N, 30lb, 300K, 300N, 300lb.
** 150 lines for 3K, 30K.
2003/10/15
IMADA CO.,LTD. 3/6
[PSS/PS/PSM/FS/FB available models]
1. PPS/PS Series: Highly Accurate, Durable Standard Model PS Series [N unit graduation: 100 lines *120 lines]
Model Capacity Resolution
PS-5N 5 N 0.05 N
PS-10N 10 N 0.1 N
PS-20N 20 N 0.2 N
PS-30N * 30 N 0.25 N
PS-50N 50 N 0.5 N
PS-100N 100 N 1 N
PS-200N 200 N 2 N
PS-300N * 300 N 2.5 N
PS-500N 500 N 5 N
PSS Series [Kg unit graduation: 100 lines *120 lines] Note 1)
Model Capacity Resolution
PSS-0.5K 500 gf 5 gf
PSS-1K 1 kgf 10 gf
PSS-2K 2 kgf 20 gf
PSS-3K * 3 kgf 25 gf
PS Series [Kg unit graduation: 100 lines *120 lines] Note 1)
Model Capacity Resolution
PS-5K 5 kgf 50 gf
PS-10K 10 kgf 10 gf
PS-20K 20 kgf 20 gf
PS-30K * 30 kgf 25 gf
PS-50K 50 kgf 500 gf
PS Series [lb unit graduation: 100 lines *120 lines] Note 1)
Model Capacity Resolution
PS-5lb 5 lb 0.05 lb
PS-10lb 10 lb 0.1 lb
PS-20lb 20 lb 0.2 lb
PS-30lb * 30 lb 0.25 lb
PS-50lb 50 lb 0.5 lb
PS-100lb 100 lb 1 lb
Note 1) Prohibited to sell Japanese market due to Japanese Measurement standard law.
2003/10/15
IMADA CO.,LTD. 4/6
2. PSM Series: High-Resolution Scale Precision Type PSM Series [N unit graduation: 200 lines **150 lines]
Model Capacity Resolution
PS-20N 20 N 0.1 N
PS-30N ** 30 N 0.2 N
PS-50N 50 N 0.25 N
PS-100N 100 N 0.5 N
PS-200N 200 N 1 N
PS-300N ** 300 N 2 N
PS-500N 500 N 2.5 N
PSM Series [kg unit graduation: 200lines **150 lines] Note 1)
Model Capacity Resolution
PS-2K 2 kgf 10 gf
PS-3K 3 kgf 20 gf
PS-5K 5 kgf 25 gf
PS-10K 10 kgf 50 gf
PS-20K 20 kgf 100 gf
PS-30K ** 30 kgf 200 gf
PS-50K 50 kgf 250 gf
Note 1) Prohibited to sell Japanese market due to Japanese Measurement standard law.
2003/10/15
IMADA CO.,LTD. 5/6
3. FB/FS Series: Steady Accuracy, Affordable Price Popular Type FB Series [N unit graduation: 100 lines*120 lines]
Model Capacity Resolution
FB-10N 10 N 0.1 N
FB-20N 20 N 0.2 N
FB-30N * 30 N 0.25 N
FB-50N 50 N 0.5 N
FB-100N 100 N 1 N
FB-200N 200 N 2 N
FB-300N * 300 N 2.5 N
FB-500N 500 N 5 N
FS Series [kg unit graduation: 100 lines *120 lines] Note 1)
Model Capacity Resolution
FS-1K 1 kgf 10 gf
FS-2K 2 kgf 20 gf
FS-3K * 3 kgf 25 gf
FS Series [kg unit graduation: 100 lines *120 lines] Note 1)
Model Capacity Resolution
FB-5K 5 kgf 50 gf
FB-10K 10 kgf 10 gf
FB-20K 20 kgf 20 gf
FB-30K * 30 kgf 25 gf
FB-50K 50 kgf 500 gf
FB Series [lb unit graduation: 100 lines *120 lines] Note 1)
Model Capacity Resolution
FB-5lb 5 lb 0.05 lb
FB-10lb 10 lb 0.1 lb
FB-20lb 20 lb 0.2 lb
FB-30lb * 30 lb 0.25 lb
FB-50lb 50 lb 0.5 lb
FB-100lb 100 lb 1 lb
Note 1) Prohibited to sell Japanese market due to Japanese Measurement standard law.
2003/10/15
IMADA CO.,LTD. 6/6
[Dimension]
[Precautions] *Do not apply excess force, torque, or impact on the measuring shaft. *Do not use the gauge under the condition of the rapid temperature changes, high
temperature, high humidity, near water and dusty place. *Keep the gauge in the exclusive carrying case when it is not used. *The use of the test stand made by Imada is recommended for the stable measuring result. *All information is subject to change without prior notice.
2003/11/19
Mechanical force gauge IMADA CO.,LTD. 1/3
-------------------------------------------------------------------------------------------------------------------------------------------------
PPSSHH sseerriieess
High Capacity Standard Model
Mechanical Force Gauge [Applications] n Strength tests for various materials (tension test, compression test, shearing test, etc.) n Measuring of attraction/repulsion force of solenoid or magnet. n Adhesion test of laminated tubes * Digital force gauges are suitable for measuring rapid changing force of the destruction
test.
[Feature] n Peak forces are captured by the peak-hold function equipped on all models n Zero adjustment function for tare weight allows the weight of attachments to be
compensated.
2003/11/19
IMADA CO.,LTD 2/3
[PSH series specification]
Model PSH
Stroke 10 mm
Measuring unit Refer to the following tables
Display feature Real-time Track / Peak-hold mode (Selectable)
Graduation 100 lines *
Accuracy Within +/- 0.1% of F.S
Operating temperature
0 to+40 degree Celsius
Weight 3.1 kg
Accessories 6 attachments Handles (2 pcs.) Force gauge mounting plate bolts (4 pcs.)
* 120 lines for 3000N, 300K, 300lb [PSH series available models]
Model Capacity Resolution Remark
PSH-500N 500N 5N
PSH -1000N 1000N 10N
PSH -2000N 2000N 20N
PSH -3000N * 3000N 25N
PSH-50K 50kgf 0.5kgf
PSH-100K 100kgf 1kgf
PSH-200K 200kgf 2kgf
PSH-300K * 300kgf 2.5kgf
Not available for Japanese
market due to the Japanese
measurement standards law.
(Available only for overseas
market)
PSH-200lb 200lb 2lb
PSH-300lb * 300lb 2.5lb
PSH-500lb 500lb 5lb
Not available for Japanese
market due to the Japanese
measurement standards law.
(Available only for overseas
market)
* Graduation: 120 lines
2003/11/19
IMADA CO.,LTD 3/3
[Dimensional drawing]
[Precautions] n Do not apply strong force exceeding its capacity, impact, or torsion stress on the
sensing shaft. n Do not use the gauge under the condition of rapid temperature changes, high
temperature, high humidity, near water and dusty places. n The mounting bolts attached must be used for setting-up the gauge n Combining with Imada’s test stand, more stable measuring becomes possible. n Keep the gauge in the exclusive carrying case when it is not used. n All information is subject to change without prior notice.
2006/3/01
Digital Force Gauge IMADA CO.,LTD. 1/3
-------------------------------------------------------------------------------------------------------------------------------------------------
DDSS22 SSeerriieess
Popular Model Digital Force Gauge (with output) [Application] -Measuring strength of electronic parts bonding or soldering -Measuring of contact press for touch panel or keyboard -Pull test of wire harness terminal -Pull test of pull top can or noodle container lid
[Feature] -Digital display of tension and compression forces -Peak hold function (capable of holding maximum force value) is installed for all models as the standard feature.
-Measuring units (kgf, N, lbf) are selectable. -The display will flash when overload or low-battery condition is detected. -Display can be reversed. -Easy operation by big display and high usability operation panel.
2006/3/01
IMADA CO.,LTD. 2/3
[DS2 Series specifications]
Model DS2 series
Measuring units kgf, N, lbf / gf, N, ozf (Selectable)
Display 4 digits LCD, Units, Mode, Warning
Accuracy +/-0.2% of F.S. +/-1digit
Measurement method
Track or Peak mode
Measurement time Maximam.1000 times / second
Display update 10 times / second
Overload capacity ~5N : 150% of F.S. (LCD blinks beyond 110%)
20N ~ : 200% of F.S. (LCD blinks beyond 110%)
Functions Peak/Track measurement mode, display reverse, comparator, sampling speed selectable(2 steps)
Power supply Rechargeable NiMH battery pack (4pcs) or AC adapter
Battery use time 10 hours of continuous operation
Operating temperature range
0 ~ + 40 degree Celsius
Weight About 420 g
Output Digital (Serial: RS232C) Mitutoyo Digimatic Analog (+/- 1 V F.S.)
Accessory 6 attachments AC adapter (100V, 120V, 230V available) *Note1 Carrying case
*Note1) Since commercial power supply voltage varies in the area where the gauge is used, three types of voltage adapters are available. Please specify the confirmed voltage for the commercial power supply when you order.
[Available models]
Model Capacity Display Resolution
DS2-2N 2N (200 gf) 2.000N (200.0 gf) 0.001N (0.1 gf)
DS2-5N 5N (500 gf) 5.000N (500.0 gf) 0.001N (0.1 gf)
DS2-20N 20N (2 kgf) 20.00N (2.000 kgf) 0.01N (0.001kgf)
DS2-50N 50N (5 kgf) 50.00N (5.000 kgf) 0.01N (0.001kgf)
DS2-200N 200N (20 kgf) 200.0N (20.00 kgf) 0.1N (0.01kgf)
DS2-500N 500N (50 kgf) 500.0N (50.00 kgf) 0.1N (0.01kgf)
DS2-1000N 1000N (100 kgf) 1000N (100.0 kgf) 1N (0.1kgf)
2006/3/01
IMADA CO.,LTD. 3/3
[Dimension]
[Note] *Do not apply excess force, torque, or impact on the measuring axis regardless to the power
is on/off. *Do not use the gauge under the condition of the rapid temperature changes, high
temperature, high humidity, near water and dusty place. *Keep the gauge in the exclusive carrying case when it is not used. *The use of the test stand made by Imada is recommended for the stable measuring result. *All information is subject to change without prior notice.
IMADA CO,. LTD 1/3
ZPH/Z2H Series Update November, 2006
Digital Force Gauge ------------------------------------------------------------------------------------------------------------------------------------------------
ZZPPHH SSeerriieess UUSSBB mmooddeell
ZZ22HH SSeerriieess NNoonn--UUSSBB mmooddeell
High Capacity Digital Force Gauge
[Applications] - Strength test for various materials (tension test, compression test, shearing test, etc.) - Measuring of attraction / repulsion force of solenoid or magnet. - Adhesion test of laminated tubes. [Features] - Digital display of tension and compression forces - Measuring units (kgf, N, lbf) are selectable. - Since USB output signal is equipped for ZPH series, fast and easy to connect to computer. - 1000 times sampling per second - Comparator function for setting Hi / Lo point values - Memory function to store data for analysis - Reversible display function - Overload prevention LED and alarm - Push and Pull peak hold by one cycle
IMADA CO,. LTD 2/3
ZPH/Z2H Series Update November, 2006
[Models] Model Capacity Display Resolution
ZPH-1000N Z2H-1000N 1000N(100.0Kgf) 1000N(100.0Kgf) 1N(0.1Kgf) ZPH-2000N Z2H-2000N 2000N(200.0Kgf) 2000N(200.0Kgf) 1N(0.1Kgf) ZPH-5000N Z2H-5000N 5000N(500.0Kgf) 5000N(500.0Kgf) 1N(0.1Kgf)
[Specifications] Model ZPH Z2H Unit Kgf / N / lbf Selectable Display 4 digit LCD-Unit-Mode-Overload LED-Comparator LED[Reversible] Sampling speed 1000 times/sec Display update 10 times/sec Usage Capacity According to each capacity Overload capacity 200%F.S. (LED flashing and buzzing beyond 110%)
A/D converter 24bit delta sigma
Micro processor 8 bit 1 chip microprocessor Accuracy +/- 0.2% F.S. +/- 1 digit
Battery use 8 hours continuous use with full charge
Approx. 10 hours for charge Use temperature 0 to +40 degree Celsius Power Internal NiMH rechargeable battery, AC adapter
USB Mitutoyo Digimatic
Output Analog(+/-2V F.S.) , RS232C
Comparator (+NG, OK, -NG): Open collector MAX30V10mA Overload warning signal: Open collector MAX30V10mA
Peak hold “Compression OR Tension”, “Compression AND Tension” selectable Comparator function Programmable high/low set points with color coded indicators Memory function 1000 measurement values Display reverse function Measurement value and unit Alarm Overload and +NG(ON/OFF selectable)
Other functions Auto zero clear (1.0~25 sec setup)
damping mode (7 level setup ) Auto power OFF 5, 10, 30, 60 minutes, and OFF selectable
USB cable, driver CD-ROM - Accessories 6 attachment, handles, mounting bolts, AC adapter,
instruction manual, Carrying case External connecting switch Display hold, zero clear, and peak/track select
Note: Since commercial power supply voltage varies in the area where the gauge is used, three types (100V, 120V, 230V) of voltage adapters are available. Please specify the confirmed voltage for the commercial power supply when you order.
IMADA CO,. LTD 3/3
ZPH/Z2H Series Update November, 2006
[Dimension]
[Notes] - Do not apply excess force, torque, or impact on the measuring axis regardless to the power is on/off. - Do not use the gauge under the condition of the rapid temperature changes, high temperature, high
humidity, near water and dusty place. - Keep the gauge in the exclusive carrying case when it is not used. - The use of the test stand made by Imada is recommended for the stable measuring result. - All information is subject to change without prior notice.
Inner structure
B-8 (included)
2006/2/15
Digital Force Gauge IMADA CO.,LTD 1/9 ------------------------------------------------------------------------------------------------------------------------------------------------
ZZ SSeerriieess ::
ZZPPSS ffoorr UUSSBB mmooddeell
ZZ22SS ffoorr nnoonn UUSSBB mmooddeell
Separate sensor model
[Applications] Measuring of the strength of electronic parts bonding or soldering Measuring of contact press for touch panel or keyboard Measuring of push / pull force for connector pin or slide cap Pull testing of pull top can or noodle container lid [Features] 1 Digital display of tension and compression forces 2 Measuring units (kgf, N, lbf) are selectable. 3 Since USB output signal is equipped for ZPS series, fast and easy to connect to computer. 4 1000 times sampling per second 5 Comparator function for setting Hi / Lo point values 6 Memory function to store data for analysis 7 Reversible display function 8 Overload prevention LED and alarm 9 Push and Pull peak hold by one cycle
2006/2/15
IMADA CO.,LTD 2/9 [Specification] Model ZPS Z2S Unit kgf/(k)N/lbf or gf/N/ozf Selectable
Display 4 digit LCD-Unit-Mode-Overload LED-Comparator LED [Reversible]
Sampling speed 1000 times/sec
Display update 10 times/sec
Usage Capacity According to each capacity
Overload capacity 200%F.S. (LED flashing and buzzing beyond 110%)
A/D converter 24bit delta sigma
Micro processor 8 bit 1 tip microprocessor
Accuracy DPU : +/- 0.2% F.S. +/- 1 digit LM : 5 to 2000N = +/- 1% F.S. +/- 1 digit,
5000N/10kN = +/- 1.5% F.S. +/- 1 digit, 20kN = +/- 2.5% F.S. +/- 1 digit
LC : +/- 0.5% F.S. +/- 1 digit LCK : +/- 0.5% F.S. +/- 1 digit
Battery use 8 hours continuous use with full charge Approx. 10 hours for charge
Use temperature 0-+40 degree Celsius
Power Internal NiMH rechargeable battery, AC adapter
USB Mitutoyo digimatic Analog (+/- 2V F.S.)
Serial RS232C
Comparator signal (+NG, OK, -NG) : Open collector MAX30V10mA
Output
Overload warning signal (OVL) : Open collector MAX30V10mA
Peak hold Compression or tension, compression and tension
Comparator function Programmable high/low set points with color coded indicators
Memory function 1000 measurement values
Display reverse function Measurement value and unit
Alarm Overload and +NG(ON/OFF selectable)
Other functions Auto zero clear (1.0~25 sec setup) damping mode (7 level setup )
Auto power OFF 5, 10, 30, 60 minutes, and OFF selectable
USB cable, driver CD-ROM - Accessories
Load Cells for Tension/Compression DPU series, 8 attachment( DPU-2N to 500N)
6 attachment( DPU-1000N to 20kN) or Load Cells for Compression LM/LC/LCK series, AC adapter, instruction manual, Carrying case
External connecting switch Display hold, zero clear, and peak/track select
Note 1) Since commercial power supply voltage varies in the area where the gauge is used, three types (100V, 120V, 230V) of voltage adapters are available. Please specify the confirmed voltage for the commercial power supply when you order.
Note 2) The accuracy will change according to the specification of load cell. This specification is corresponded to DPU series.
2006/2/15
IMADA CO.,LTD 3/9
[ZPS/Z2S series available models] Load Cells for Tension/Compression DPU
Model Capacity Display Resolution ZPS(Z2S)- DPU-2N 2N(200gf) 2.00N(200.0gf) 0.001N(0.1gf) ZPS(Z2S)- DPU-5N 5N(500gf) 5.000N(500.0gf) 0.001N(0.1gf) ZPS(Z2S)- DPU-20N 20N(2kgf) 20.00N(2.000kgf) 0.01N(0.001kgf) ZPS(Z2S)- DPU-50N 50N(5kgf) 50.00N(5.000kgf) 0.01N(0.001kgf) ZPS(Z2S)- DPU-100N 100N(10kgf) 100.0N(10.00kgf) 0.1N(0.01kgf) ZPS(Z2S)- DPU-200N 200N(20kgf) 200.0N(20.00kgf) 0.1N(0.01kgf) ZPS(Z2S)- DPU-500N 500N(50kgf) 500.0N(50.00kgf) 0.1N(0.01kgf) ZPS(Z2S)- DPU-1000N 1000N(100kgf) 1000N(100.0kgf) 1N(0.1kgf) ZPS(Z2S)- DPU-2000N 2000N(200kgf) 2000N(200.0kgf) 1N(0.1kgf) ZPS(Z2S)- DPU-5000N 5000N(500kgf) 5000N(500.0kgf) 1N(0.1kgf) ZPS(Z2S)- DPU-10kN 10kN(1000kgf) 10.00kN(1000kgf) 0.01kN(1kgf) ZPS(Z2S)- DPU-20kN 20kN(2000kgf) 20.00kN(2000kgf) 0.01kN(1kgf)
[Model specification] Please specify a load cell model following. For example : Display “ZPS” , Load Cell “DPU” , Capacity ”500N”
ZPS - DPU - 500N Imada’s load cell other than the standard set can also be selected. Please refer to load cell specification for detail.
2006/2/15
IMADA CO.,LTD 4/9 Load Cells for Compression LM/LC/LCK
Model Capacity Display Resolution ZPS(Z2S)- LM-5N 5N(500gf) 5.00N(500.0gf) 0.001N(0.1gf) ZPS(Z2S)- LM-10N 10N(1kgf) 10.00N(1.000kgf) 0.01N(0.001kgf) ZPS(Z2S)- LM-20N 20N(2kgf) 20.00N(2.000kgf) 0.01N(0.001kgf) ZPS(Z2S)- LM-50N 50N(5kgf) 50.00N(5.000kgf) 0.01N(0.001kgf) ZPS(Z2S)- LM-100N 100N(10kgf) 100.0N(10.00kgf) 0.1N(0.01kgf) ZPS(Z2S)- LM-200N 200N(20kgf) 200.0N(20.00kgf) 0.1N(0.01kgf) ZPS(Z2S)- LM-500N 500N(50kgf) 500.0N(50.00kgf) 0.1N(0.01kgf) ZPS(Z2S)- LM-1000N 1000N(100kgf) 1000N(100.0kgf) 1N(0.1kgf) ZPS(Z2S)- LM-2000N 2000N(200kgf) 2000N(200.0kgf) 1N(0.1kgf) ZPS(Z2S)- LM-5000N 5000N(500kgf) 5000N(500.0kgf) 1N(0.1kgf) ZPS(Z2S)- LM-10kN 10kN(1000kgf) 10.00kN(1000kgf) 0.01kN(1kgf) ZPS(Z2S)- LM-20kN 20kN(2000kgf) 20.00kN(2000kgf) 0.01kN(1kgf) ZPS(Z2S)- LC-500N 500N(50kgf) 500.0N(50.00kgf) 0.1N(0.01kgf) ZPS(Z2S)- LC-1000N 1000N(100kgf) 1000N(100.0kgf) 1N(0.1kgf) ZPS(Z2S)- LC-2000N 2000N(200kgf) 2000N(200.0kgf) 1N(0.1kgf) ZPS(Z2S)- LC-5000N 5000N(500kgf) 5000N(500.0kgf) 1N(0.1kgf) ZPS(Z2S)- LC-10kN 10kN(1000kgf) 10.00kN(1000kgf) 0.01kN(1kgf) ZPS(Z2S)- LC-20kN 20kN(2000kgf) 20.00kN(2000kgf) 0.01kN(1kgf) ZPS(Z2S)- LCK-5000N 5000N(500kgf) 5000N(500.0kgf) 1N(0.1kgf) ZPS(Z2S)- LCK10kN 10kN(1000kgf) 10.00kN(1000kgf) 0.01kN(1kgf) ZPS(Z2S)- LCK-20kN 20kN(2000kgf) 20.00kN(2000kgf) 0.01kN(1kgf)
[Model specification] Please specify a load cell model following. For example : Display “Z2S” , Load Cell “LC” , Capacity ”1000N”
Z2S - LC - 1000N Imada’s load cell other than the standard set can also be selected. Please refer to load cell specification for detail.
2006/2/15
IMADA CO.,LTD 5/9 [Dimension]
ZPS/Z2S
Connector for sensor
2006/2/15
IMADA CO.,LTD 6/9 Load cell DPU series DPU-2N to 500N Accuracy : +/- 0.2% F.S. +/- 1 digit
Pin Signal name A IN+ B OUT- C OUT+ D IN- E -
Model A B C D E
DPU-2N 71 57 12 26 32 DPU-5N 71 57 12 26 32 DPU-10N 71 57 12 26 32 DPU-20N 73 59 7.5 33 39 DPU-50N 73 59 7.5 33 39 DPU-100N 73 59 7.5 33 39 DPU-200N 73 59 7.5 33 39 DPU-500N 73 59 7.5 33 39
2006/2/15
IMADA CO.,LTD 7/9 DPU-1000N to 20kN Accuracy : +/- 0.2% F.S. +/- 1 digit
For other load cells, please refer to their specification for detail.
Model A B C D E F G Remark DPU-1000N 85 58 20 24 40 M12P1.75
Depth 15 M5 Depth 8 With the
sensing shaft
DPU-2000N 85 58 20 24 40 M12P1.75 Depth 15
M5 Depth 8 With the sensing shaft
DPU-5000N 85 58 20 24 40 M12P1.75 Depth 15
M5 Depth 8 With the sensing shaft
DPU-10kN 105 78 32 36 60 M18 P1.5 Depth 22
M6 Depth 10 Without the sensing shaft
DPU-20kN 110 88 35 40 60 M18 P1.5 Depth 22
M6 Depth 10 Without the sensing shaft
2006/2/15
IMADA CO.,LTD 8/9 Load cell LM/LC/LCK series
LM-5N to 20kN Accuracy : 5 to 2000N = +/- 1% F.S. +/- 1 digit,
5000N/10kN = +/- 1.5% F.S. +/- 1 digit, 20kN = +/- 2.5% F.S. +/- 1 digit
[ LM-5N~50N ] [ LM-100N~1000N ]
[ LM-2000N ] [LM-5000N~20kN]
2006/2/15
IMADA CO.,LTD 9/9
LC-500N to 20kN
LCK-5000N to 20kN
[Precaution] n Please pay close attention for the installation of the load cells.
Never apply strong force or impact especially on the sensing direction. Do not apply bending or torsion stress when setting up the sensing shaft to a
measuring object. n Do not use in the condition of rapid temperature changes, high temperature, high
humidity, near water and dusty place. n All information is subject to change without prior notice.
4-M4 depth5
Accuracy : +/- 0.5% F.S. +/- 1 digit
Accuracy : +/- 0.5% F.S. +/- 1 digit
Imada co., ltd. 1/3
2004/5/20
Manual Test Stand
------------------------------------------------------------------------------------------------------------------------------------------------------
KKVV--5500NN sseerriieess
Handheld test stand
[Applications] n For touching force measurement of touch panel sheet, sheet switch, and keyboard n For measurement of small springs
[Features] n Small movement is possible by knob operation. n Easy operation and light weight. n Length meter which resolution is 0.01mm is available as option.
Imada co., ltd. 2/3
2004/5/20
[Models] Model Capacity Scale unit
KV-50N -
KV-50N-S 50N
Yes
[SSpecifications]
Capacity 50 N
Stroke Approx. 70 mm
Feeding method Feed screw
Travel 1.0 mm / every complete turn of hand wheel
Table See dimensions
Dimensions See dimensions
Weight Approx. 2kg
Accessories Force gauge mount, installation screws
Scale unit (option *) Resolution: 0.01mm
Zero / Origin
Force gauge Imada brand digital/mechanical force gauge
* Factory built only
[OOppttiioonnaall FFeeaattuurreess]
Lab. Jacks Travels up or down by 28mm
Sample fixture Within 50 x 50 mm
Extend table Up to 200 x 200 mm
Extend stroke Up to +100 mm (capacity will be reduced)
Stain-less Shafts and body are made from stainless steel.
Motorized Travels by electronic motor (details must be consulted)
We offer you some customize unit under your wish. Please contact for details.
Imada co., ltd. 3/3
2004/5/20
[Dimensions]
A
KV-50N 31
KV-50N-S 32.2
[Note] Force gauge (sold separately) is required for actual measuring. Please order Imada products. All information is subject to change without prior notice.
Scale unit
Only for KV-50N-S
4 holes 3.5 mm dia.
For Mechanical force gauge
4 holes 4.5 mm dia.
For digital force gauge
Shafts 10 mm dia.
IMADA CO., LTD. 1/3
HV-1000N Updated July 2006
Test stand
-------------------------------------------------------------------------------------------------------------------------------------------------
HHVV--11000000NN sseerriieess
Manual Test Stand
(Force gauge and speed/length meter are sold separately.)
[Applications]
- Various material testing up to 1000N
(measuring of tensile strength, compressive strength, shearing strength and etc).
- Analysis of mechanical parts for break point and free fit.
[Feature]
- Stable measuring by feed screw features with small step of the travel length.
- Operation efficiency is excellent due to its spacious design.
- Optional scale unit implements scaling its travel length.
IMADA CO., LTD. 2/3
HV-1000N Updated July 2006
[HV-1000N series models]
Model Capacity Scale unit
HV-1000N 1000N -
HV-1000N-S 1000N Yes
[HV-1000N series specifications]
Model HV-1000N series
Capacity 1000N
Stroke Approx. 430mm
Feeding method Feed screw with 3mm lead
Travel 1.2 mm / every complete turn of hand wheel
Table 150 x 100 mm, Steel
Force gauge Imada mechanical / digital force gauge
Dimensions See dimensions
Wight Approx. 18kg
Accessories Grip mount GF-2(with M10/M6 thread)
Scale unit
(option *)
Resolution: 0.01mm
Zero / Origin
* Factory built only
IMADA CO., LTD. 3/3
HV-1000N Updated July 2006
[Dimensions]
W D H X Y C R S T U V
HV-1000N 200 275 730 305 139.5 50 150 100 9 15(13.2*1) 69.3
*1 … HV-1000N-S
[Note] -Force gauge is not included with this test stand. -Various optional attachments are available. -Please do not apply the load exceeding force of capacity. -Please avoid rapid temperature change, high humidity, the water, the dust, and the strong shock. -It may change without a preliminary announcement for improvement etc.
Scale Unit
Only forHV-1000N-S
IMADA CO., LTD. 1/3
HV-500NII Updated June 2007
Test stand
-------------------------------------------------------------------------------------------------------------------------------------------------
HHVV--550000NNIIII sseerriieess
Manual Test Stand
(Force gauge and speed/length meter are sold separately.)
[Applications]
- Various material testing up to 500N
(measuring of tensile strength, compressive strength, shearing strength and etc).
- Analysis of mechanical parts for break point and free fit.
[Feature]
- Stable measuring by feed screw features with small step of the travel length.
- Operation efficiency is excellent due to its spacious design.
- Best price testing tool with light-wait and small size.
- Optional scale unit implements scaling its travel length.
IMADA CO., LTD. 2/3
HV-500NII Updated June 2007
[HV-1000N series models]
Model Capacity Scale unit
HV-500NII -
HV-500NII-S 500N
Yes
HV-500NII-L -
HV-500NII-S-L 200N
Yes
[HV-1000N series specifications]
Model HV-500NII series
Capacity 500N
Stroke Approx. 288 / 488 mm
Feeding method Feed screw with 3mm lead
Travel 2 mm / every complete turn of hand wheel
Table 150 x 100 mm, Stainless plate
Force gauge
Imada mechanical / digital force gauge
High capacity models such as ZPH or PSH are not
suitable
Dimensions See dimensions
Wight Approx. 10 kg
Accessories Grip mount GF-1(with M6 thread)
Scale unit
(option *)
Resolution: 0.01mm
Zero / Origin
* Factory built only
IMADA CO., LTD. 3/3
HV-500NII Updated June 2007
[Dimensions]
[Note]
-Force gauge is not included with this test stand.
-Various optional attachments are available.
-Please do not apply the load exceeding force of capacity.
-Please avoid rapid temperature change, high humidity, the water, the dust, and the strong shock.
-It may change without a preliminary announcement for improvement etc.
Scale Unit
Only for –S
model
H N
Standard 597.5
-L 797.5 13.5
-S 597.5
-S-L 797.5 12.3
Force Gauge
Mount
Force Gauge
Mount
Holes for digital
models
Holes for mechanical
models
IMADA CO., LTD. 1/4
MH-1000N / ML-1000N series Updated June 2006
Test stand
-------------------------------------------------------------------------------------------------------------------------------------------------
MMHH--11000000NN // MMLL--11000000NN sseerriieess
Motorized Test Stand
(Photo is MH-1000N. Force gauge shown above is sold separately.)
[Applications]
- Various material testing up to 1000N (measuring of tensile strength, compressive strength, shearing strength and etc).
- Analysis of mechanical parts for break point and free fit.
- Measure peeling force of glued material or heat seals.
[Feature]
- Stable measuring by feed screw features with small step of the travel length.
- Easier handling for material due to its horizontal design.
- Motion in stable speed.
- Devised top cover avoids fragments of a sample.
- Optional scale unit or length/speed meter implements scaling its travel length.
- Overload protection and force control connecting with digital force gauge (Only for MH series)
- Compatible with IMADA digital and mechanical force gauges (except high capacity models).
IMADA CO., LTD. 2/4
MH-1000N / ML-1000N series Updated June 2006
[MH-1000N/ML-1000N series models]
Model Capacity Auto cycle Length/speed
meter Scale unit
MH-1000N Yes
ML-1000N
MH-1000N-E Yes Yes
ML-1000N-E Yes
MH-1000N-S Yes Yes
ML-1000N-S
1000N
Yes
[MH-1000N/ML-1000N series specifications]
Model MH-1000N ML-1000N
Capacity 1000N
Stroke Approx. 300mm
Feeding method Feed screw with 3 mm lead
Travel speed 6 to 180 mm/min non-step
Force gauge Imada mechanical / digital force gauge
High capacity ZPH/Z2H/PSH series are not compatible.
Single/Continuous
cycle Yes
Press and keep button for 2
seconds so that this machine keeps
moving
Overload protection
Force control Yes *0
Power Free between 100 to 240 VAC
Dimensions See dimensions
Wight Approx. 14kg
*0 Optional cable CB-501 is necessary for connection with force gauge. Some model of force gauge is not compatible with this function.
IMADA CO., LTD. 3/4
MH-1000N / ML-1000N series Updated June 2006
[Built-in options]
Factory built only. The customer can not build them after purchasing.
Scale unit
(option *1)
Resolution: 0.01mm
Zero / Origin
Length/speed meter
(option *2)
Display unit EN-00
Speed resolution 1mm/min
Length resolution 0.01mm
Zero
Speed range
12 to 360 mm/min
Capacity 500N
“-F” suffix follows after the model number
Extended stroke Up to 1000 mm
Ask us for detail
*1 Factory built only for MH/ML-1000N-S
*2 Factory built only for MH/ML-1000N-E. See a brochure for EN-00
IMADA CO., LTD. 4/4
MH-1000N / ML-1000N series Updated June 2006
[Dimensions]
[Note]
- Force gauge is not included with this test stand. - Various optional attachments are available. - “Overload protection” does NOT completely avoid every failure of the gauge. - Please do not apply the load exceeding force of capacity. - Please avoid rapid temperature change, high humidity, the water, the dust, and the strong shock. - It may change without a preliminary announcement for improvement etc.
Limit knobs
Attachment Bracket
Attachment Bracket
Operation Panel
Force Gauge Mount
IMADA CO., LTD. 1/3
MX-1000N / MV-1000N series Updated May 2006
Test stand
-------------------------------------------------------------------------------------------------------------------------------------------------
MMXX--11000000NN // MMVV--11000000NN sseerriieess
Motorized Test Stand
(Force gauge and speed/length meter are sold separately.)
[Applications]
- Various material testing up to 1000N
(measuring of tensile strength, compressive strength, shearing strength and etc).
- Analysis of mechanical parts for break point and free fit.
[Features]
- Stable measuring by feed screw features with small step of the travel length.
- Suitable for Imada brand digital and mechanical force gauges.
- Overload protection and force control connecting with digital force gauge (Only for MX series)
- Optional scale unit implements scaling its travel length.
IMADA CO., LTD. 2/3
MX-1000N / MV-1000N series Updated May 2006
[MX-1000N/MV-1000N series models]
Model Capacity Auto cycle Length/speed
meter Scale unit
MX-1000N Yes
MV-1000N
MX-1000N-E Yes Yes
MV-1000N-E Yes
MX-1000N-S Yes Yes
MV-1000N-S
1000N
Yes
[MX-1000N/MV-1000N series specifications]
Model MX-1000N MV-1000N
Capacity 1000N
Stroke Approx. 400mm
Feeding method Feed screw with 4mm lead
Travel speed 8 to 240 mm/min non-step
Table 150 x 100 mm, Steel
Force gauge Imada mechanical / digital force gauge
Single/Continuous cycle Yes
Overload protection
Force control Yes *0
Press and keep button for 2
seconds so that this machine keeps
moving
Dimensions See dimensions
Wight Approx. 24kg
Accessories Grip mount GF-2(with M10/M6 thread)
Below goodies are optional
Scale unit
(option *1)
Resolution: 0.01mm
Zero / Origin
Length/speed meter
(option *2)
EN-00
Speed resolution 1mm/min
Length resolution 0.01mm
Zero
*0 Optional cable CB-501 is necessary for connection with force gauge. Some model of force gauge is not compatible with this function.
*1 Factory built only for MX/MV-1000N-S
*2 Factory built only for MX/MV-1000N-E. See a brochure for EN-00
IMADA CO., LTD. 3/3
MX-1000N / MV-1000N series Updated May 2006
[Dimensions]
*1 Only for MX/MV-1000N-S
[Note]
- Force gauge is not included with this test stand.
- Various optional attachments are available.
- “Overload protection” does NOT completely avoid every failure of the gauge.
- Please do not apply the load exceeding force of capacity.
- Please avoid rapid temperature change, high humidity, the water, the dust, and the strong shock.
- It may change without a preliminary announcement for improvement etc.
Scale unit*1
Limit knobs
Table
Crosshead
Grip mount GF-2 Operation
panel
Dimension “A”(mm)
MX/MV-1000N 12
MX/MV-1000N-S 10.8
Force gauge mount
IMADA CO.,LTD. 1/3
2003/11/07
Option for motorized test stand
-------------------------------------------------------------------------------------------------------------------------------------------------
EENN--0000
Speed / length meter
MV-500NII-E / MX-500N-E MX-2000N-E
* Force gauge is sold separately
[Applications] -For tendency of measuring by different speed -Valuation test of switches -For peel adhesion strength test -Valuation test of springs
[Feature]
-This is option for motorized stand. Please use suffix “-E” after model name of stand. -To increase the repeatability of measuring keeping fixed speed -Hold and zero clear function
IMADA CO.,LTD. 2/3
2003/11/07
[Specification]
Model EN-00
Display 9999.99mm (Max)
Resolution 0.01mm
Accuracy 0.1mm (Max)
Resolution for speed
1mm / minute
Function Zero reset (for length) Display hold (for both speed/length)
Available test stands
MV-500II-E MX-500N-E MX-2000N-E
See the each specifications for the detail of test stand. This speed/length meter is option of motorized stand. Please order this with test stand It is required to install to a stand before ship.
IMADA CO.,LTD. 3/3
2003/11/07
[Dimension]
[Note] -Force gauges are sold separately. -Various optional attachments are available.
-It may change without a preliminary announcement for improvement etc.
IMADA CO.,LTD 1/4
DTX2 Series September, 2004
Screw-cap tester
DDTTXX22 SSeerriieess
Torque tester of screw-caps with easy data processing
[Applications] n Measure the torque of screw caps of cosmetics, foods or drinks. [Features] n Less shakiness of the table unit. n Weight of table unit and vertical force are kept by 2 ball bearings. n Easy to clamp the sample by 4 clamping mouth-pieces. n Digital display shows CW/CCW torque and peak torque. n Comparator function which can program Hi/Lo set point. n Memory stores up to 1000 measurement. n Various outputs RS-232C for PC, Analog and Mitutoyo Digimatic. n Selectable three units (N-m/Kgf-m/lb-in or N-cm/Kgf-cm/lb-in) n Two models ( battery use or AC power use) are available
IMADA CO.,LTD 2/4
DTX2 Series September, 2004
[Models] There are 6 ranges for each series as the followings
Model Capacity Display Resolution
DTX2-2-A DTX2-2-B 2N-m 2.000N-m 0.001N-m
DTX2-5-A DTX2-5-B 5N-m 5.000N-m 0.001N-m
DTX2-10-A DTX2-10-B 10N-m 10.00N-m 0.01N-m
DTX2-200Nc-A DTX2-200Nc-B 200N-cm 200.0N-cm 0.1N-cm
DTX2-500Nc-A DTX2-500Nc-B 500N-cm 500.0N-cm 0.1N-cm
DTX2-1000Nc-A DTX2-1000Nc-B 1000N-cm 1000N-cm 1N-cm
Difference between models followed by “-A” and models followed by “-B”
Model Source of Power
DTX2-[range]-A Mains AC100V~240V
DTX2-[range]-B NiMH rechargeable batteries or AC adapter
[Optional Accessories]
Analog cable CB-201 Connects this unit to analog instruments
Pen recorder SS-100F-MM Plots graphic chart by analog output from this unit
RS232C cable CB-204 Connects this unit to computer
Software ZLINK2E Plots chart and records measurement via RS-232C output form this unit
Digimatic cable CB-304 Connect this unit to Mitutoyo Digimatic mini-processor.
Digimatic mini-processor DP-1VR You can print out measurement, and also take simple statistics.
IMADA CO.,LTD 3/4
DTX2 Series September, 2004
[Specifications]
Model DTX2-A Series DTX2-B Series
Measuring units N-m/kg-m/lb-in or N-cm/kg-cm/lb-in
Display 4 digit LCD Unit-Mode-Overload LED-Comparator LED
Sampling rate 1000 times/sec.
Display update 10 times/sec.
Over torque capacity 150% of rated capacity
LED flashes and buzzes beyond 110% of capacity
Diameter of sample 20 mm to 180 mm dia.
A/D converter 24 bits delta sigma
Processor 8 bits 1 chip micro processor
Accuracy +/- 0.5 % of rated capacity
Battery use Approx. 8 hours
10 hours for charging
Temperature of use 0 – 40 degree Celsius
Power source 100 to 240 VAC NiMH rechargeable battery
AC adapter -1
Dimensions See next page …
Weight Approx. 4.5 kg
RS-232C Mitutoyo Digimatic Analog voltage +/-2V
Comparator signal (+NG, OK –NG)
Open collector max. 30 VDC 10 mA Outputs
Over torque warning signal (OVL)
Open collector max. 30 VDC 10 mA
Inputs Close contact
Display hold, zero, peak/track select
Peak mode “And” mode (peak of CW and CCW) or “Or” mode (peak of CW or CCW)
Comparator Programmable hi/low set points with color coded indicators and output
Memory Up to 1000 data can be stored
Output, buzzing and LED flashing for over torque warning Alarm
Buzzing at the value of comparator +NG
Others Auto zeroing (selectable between 1.0 and 25.5)
Dumping (selectable 7 levels)
Auto-power-off Disable, 5, 10, 30, 60 minutes selectable
-1 Since commercial power supply voltage varies in the area where the gauge is used, three types (100V, 120V, 230V) of
voltage adapters are available. Please specify the confirmed voltage for the commercial power supply when you
order.
IMADA CO.,LTD 4/4
DTX2 Series September, 2004
[Dimensions]
[Notes] n Do not apply excess torque, force, or impact on regardless to the power is on/off. n Do not use the instrument under the condition of the rapid temperature changes,
high temperature, high humidity, near water and dusty place. n All information is subject to change without prior notice.