2
PSM Product Portfolio www.psm.com The Proven Alternative Aftermarket Gas Turbine Hot Section Airfoils fully compatible for the following frames: • GE Frames 7F.01, 7F.02, 7F.03 (60hz) and 9F.02, 9F.03 (50hz) • Siemens Westinghouse (SW) 501F Series - Models FC, FD1, FD2 & FD3 • Mitsubishi (MHI) 501F Series - Model F3 Aftermarket Performance Upgrade Packages to improve heat rate, increase power output and inspection intervals while reducing life cycle costs for: • GE Frames 7F.01, 7F.02, 7F.03 (60hz) and 9F.02, 9F.03 (50hz) • SW 501F Series Combustion System Components fully compatible for the following frames: • Drop-in fully-compatible PSM designed and manufactured replacement parts for GE DLN-2.6 systems installed on Frame 7F.03, 7F.04 and the DLN-2+ system installed on 9F.03, 9F.04 • Drop-In fully-compatible PSM designed and manufactured replacement parts for SW501F (Models FC, FD1, FD2 and FD3) and MHI 501F (Model F3) • “Advanced FlameSheet™ combustion system built for enhanced turndown and fuel flexibility available for ALL GE Frame 7E and 7F models (60hz) and ALL Frame 9E, 6F and 9F models (50hz) F-Class Parts and Systems Aftermarket Gas Turbine Compressor Airfoils fully compatible for: • GE Frames 7F.01, 7F.02, 7F.03 (60hz) and 9F.02, 9F.03 (50hz) • SW 501F (Models FC, FD1 and FD2) Autotune real-time combustion system control tuning package for optimizing combustion dynamics, emissions and power output for the GE 7FA+e, GE & SW 501F and Mature Frame gas turbines (Mark V, Ve, VI, VIe, Netmation, T3000, TXP & Ovation™). LEC-III ® Ultra-low NOx Combustion Systems Drop-In compatible PSM designed and manufactured replacement parts for: • GE DLN-1 combustion system for frames 6B, 7E/EA and 9E LEC-III ® Combustion Upgrade Package to replace standard combustion systems, featuring 24K hours/900 starts and <5 ppm NOx. Including Inlet Bleed Heat (IBH), exhaust upgrades and gas turbine controls conversion for the following frames: • GE 6B, 7E/EA, and 9E • Siemens Westinghouse SW501B6 and SW501D5 Aftermarket Gas Turbine Hot Section Airfoils fully compatible for the following frames: • GE 6B and 7E/EA NexGen™ LEC Combustion System available with Dual Fuel capability • GE 6B and 7E/EA B & E Class Parts and Systems Ansaldo Energia Group

PSM Product Portfolio - psm.com

  • Upload
    dangdat

  • View
    223

  • Download
    1

Embed Size (px)

Citation preview

Page 1: PSM Product Portfolio - psm.com

PSM Product Portfolio

www.psm.com

T he Proven A l t e r na t i v e

Aftermarket Gas Turbine Hot Section Airfoils fully compatible for the following frames:• GE Frames 7F.01, 7F.02, 7F.03 (60hz) and 9F.02, 9F.03 (50hz)• Siemens Westinghouse (SW) 501F Series - Models FC, FD1, FD2 & FD3• Mitsubishi (MHI) 501F Series - Model F3

Aftermarket Performance Upgrade Packages to improve heat rate, increase power output and inspection intervals while reducing life cycle costs for:• GE Frames 7F.01, 7F.02, 7F.03 (60hz) and 9F.02, 9F.03 (50hz) • SW 501F Series

Combustion System Components fully compatible for the following frames:• Drop-in fully-compatible PSM designed and manufactured replacement parts for

GE DLN-2.6 systems installed on Frame 7F.03, 7F.04 and the DLN-2+ system installed on 9F.03, 9F.04

• Drop-In fully-compatible PSM designed and manufactured replacement parts for SW501F (Models FC, FD1, FD2 and FD3) and MHI 501F (Model F3)

• “Advanced FlameSheet™ combustion system built for enhanced turndown and fuel flexibility available for ALL GE Frame 7E and 7F models (60hz) and ALL Frame 9E, 6F and 9F models (50hz)

F-Class Parts and Systems

Aftermarket Gas Turbine Compressor Airfoils fully compatible for: • GE Frames 7F.01, 7F.02, 7F.03 (60hz) and 9F.02, 9F.03 (50hz) • SW 501F (Models FC, FD1 and FD2)

Autotune real-time combustion system control tuning package for optimizing combustion dynamics, emissions and power output for the GE 7FA+e, GE & SW 501F and Mature Frame gas turbines (Mark V, Ve, VI, VIe, Netmation, T3000, TXP & Ovation™).

LEC-III® Ultra-low NOx Combustion SystemsDrop-In compatible PSM designed and manufactured replacement parts for: • GE DLN-1 combustion system for frames 6B, 7E/EA and 9E

LEC-III® Combustion Upgrade Package to replace standard combustion systems, featuring 24K hours/900 starts and <5 ppm NOx. Including Inlet Bleed Heat (IBH), exhaust upgrades and gas turbine controls conversion for the following frames:• GE 6B, 7E/EA, and 9E• Siemens Westinghouse SW501B6 and SW501D5

Aftermarket Gas Turbine Hot Section Airfoils fully compatible for the following frames:• GE 6B and 7E/EA

NexGen™ LEC Combustion System available with Dual Fuel capability• GE 6B and 7E/EA

B & E Class Parts and Systems

Ansaldo Energia Group

Page 2: PSM Product Portfolio - psm.com

PSM Service Portfolio

www.psm.com

Field Services & Outage Management including on-staff bladers and supply of laborfor gas turbines, steam turbines and generators worldwide for:• GE B, E & F-class • SW & MHI F-class

Reconditioning & Repair of all turbine airfoils and combustion system components, including fuel nozzle overhaul, for:• GE Frames 7F & 9F • SW & MHI 501F • GE 6B & 7E/EA (Standard & DLN-1)

Combustion System Engine Tuning including Monitoring and DiagnosticsSupport for all rotating equipment (e.g., remote monitoring) of gas turbines worldwide for:• GE B, E & F-class • SW & MHI F-class

Rotor Rebuild & Inspection including disk repairs, low speed or high speed vacuum balance and rotor life extension/assessment for: • GE Frame 7F & 9F (All Models) • SW & MHI 501F • GE 6B & 7E/EA • GE Frames 7F & 9F

R&D, Engineering Assessments, Root Cause Analysis and system technical support for gas turbines:• GE B, E & F-class • SW & MHI F-class

Flexible Long-Term Parts and Services Agreements (LTSA) combine all of our products and services for a custom solution that meets your needs: • GE Frames 7F and 9F • SW & MHI 501F • GE 6B & 7E/EA

PSM’s Power Plant Solutions provide integrated services and upgrades for all your critical power plant components and systems. We provide a single point of contact for maximizing your plant’s performance potential, increasing operational flexibility, and outage management.• Gas and Steam Turbines • Generators • Heat Recovery Steam Generators• Balance of Plant • Control and Protection • Monitoring and Diagnostics

Service Offerings

© 2016 Power Systems Mfg., LLC (PSM). PSM is not an authorized distributor or representative of GE, Siemens, Mitsubishi, or Westinghouse. The data contained herein is provided for information purposes only. PSM makes no representation, warranty or guarantee (whether expressed or implied) as to the accuracy or completeness of such data or any projected performance criteria.

www.psm.com

Company Headquarters andSales for Gas Turbines1440 West Indiantown RoadJupiter, Florida 33458 USAPhone: +1 561 354 1100Fax: +1 561 354 1199

Sales for Gas TurbinesPhone : +41 585 058 593

Sales for Gas TurbinesPhone : +41 585 058 593

Sales for Gas TurbinesPhone : +886 2 2656 7739

+ Americas + Europe/Africa + Middle East + Asia Pacific

Revision 6/2016

Ansaldo Energia Group

Ansaldo Energia Group