Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
Features
• Absorbent Glass Mat (AGM) technology for superior
performance
• Valve regulated, spill proof construction allows safe
operation in any position
• Power/volume ratio yielding unrivaled energy density
• Rugged impact resistant ABS case and cover (UL94-HB)
• Approved for transport by air. D.O.T., I.A.T.A., F.A.A. and
C.A.B. certified
• U.L. recognized under file number MH 20845
Performance Specifications
• FP - FASTON PolarizedPositive: F2 - Quick
disconnect tabs, 0.250”
x 0.032”- Mate with AMP.
INC. FASTON “250” series
Negative: F1 - Quickdisconnect tabs, 0.187”
x 0.032”- Mate with AMP.
INC. FASTON “187” series
F1 F2
4.75
0.8
6.35
0.8
Nominal Voltage ........................................................................ 12 volts (6 cells)
Nominal Capacity
20-hr.
10-hr.
5-hr. (1.01A to 10.20 volts) .......................................................... 5.05 AH
1-hr. (3.92A to 9.00 volts) ............................................................ 3.92 AH
15-min. (11.6A to 9.00 volts) .............................................................. 2.90 AH
Approximate Weight ........................................................... 4.40 lbs. (2.00 kg)
Energy Density (20-hr. rate) .............................. 1.65 W-h/in3 (100.55 W-h/l)
Physical Dimensions: in (mm) Specific Energy (20-hr. rate) ............................. 16.36 W-h/lb (36.08 W-h/kg)
Internal Resistance (approx.) ...................................................... 30 milliohms
Max Discharge Current (7 Min.) ............................................... 18.0 amperes
Max Short-Duration Discharge Current (10 Sec.).................. 60.0 amperes
Shelf Life (% of nominal capacity at 68°F (20°C))
1 Month ...................................................................................................... 97%
3 Months..................................................................................................... 91%
6 Months .................................................................................................... 83%
Operating Temperature Range
Charge.. ........................................................... -4°F (-20°C) to 122°F (50°C)
Discharge ....................................................... -40°F (-40°C) to 140°F (60°C)
Case ...................................................................................................... ABS Plastic
Power-Sonic Chargers ................................................ PSC-12800A, 12800A-C
L: 5.95 (151)
Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for
height dimensions. All data subject to change without notice.
Further Information
Please refer to our website www.power-sonic.com for a complete range of useful
downloads, such as product catalogs, material safety data sheets (MSDS), technical
manual, ISO certification, etc..
PS-1260FP 12 Volt 6.0 AH
W
Sealed Rechargeable
Battery
HT
MODEL PS-1260 FP
® 12 Volt 6.0 Amp. Hr.
Pb
www.power-sonic.com NONSPILLABLE
MH20845
L
H
To ensure safe and efficient operation always refer to the latest edition of our Technical Manual, as published on our website. All data subject to change without notice. www.sealedperformance.com.au
6.35
3.2
7.95
3.4
Terminals (mm)
C
.............................................................................................. 6.00 AH
.............................................................................................. 5.50 AH
AMPS/WATTS @ 25° C
FINAL
VOLTAGE
10 MIN 15 MIN 30 MIN 45 MIN 1 HR 2 HR 3 HR 5 HR 8 HR 10 HR 20 HR
A/W A/W A/W A/W A/W A/W A/W A/W A/W A/W A/W
1.85 10.3/19.3 8.87/16.7 5.01/9.51 3.73/7.16 2.97/5.73 1.64/3.18 1.16/2.26 0.784/1.54 0.540/1.07 0.451/0.893 0.248/0.490
1.80 11.8/21.6 10.0/18.5 5.46/10.3 4.00/7.62 3.15/6.04 1.74/3.36 1.23/2.37 0.824/1.61 0.560/1.10 0.465/0.919 0.250/0.495
1.75 13.1/23.8 11.2/20.5 6.11/11.4 4.29/8.12 3.34/6.38 1.82/3.50 1.29/2.50 0.847/1.65 0.575/1.13 0.477/0.940 0.253/0.499
1.70 14.3/25.6 12.2/22.2 6.56/12.2 4.62/8.70 3.54/6.74 1.89/3.63 1.33/2.55 0.866/1.68 0.584/1.15 0.484/0.955 0.257/0.507
1.65 15.5/27.3 13.2/23.7 7.14/13.2 4.89/9.14 3.71/7.02 1.96/3.74 1.36/2.61 0.885/1.71 0.593/1.16 0.490/0.965 0.261/0.514
1.60 16.9/29.4 14.5/25.6 7.62/13.9 5.16/9.58 3.92/7.37 2.06/3.92 1.42/2.71 0.904/1.74 0.606/1.18 0.499/0.980 0.262/0.516
Discharge Characteristics Float Charging Characteristics
12V Battery (V) Temperature: 25°C Charge Charging Charged
13.0 Volume Current Voltage
0.10 CA - 2.25 V/Cell Temperature 25°C % (XCA) (V)
12.0
120 0.25
15.0Charged Volume
11.0
10.0
9.0
8.0
1 2 4 6 8 10 20 40 60 2 4 6 8 10 20 min h
110
100
90
80
70
60
50
40
30
20
10
0
0.20
0.15
0.10
0.05
0
14.0
13.0
12.0
11.0
0 4 8 12 16
Charge Voltage (Constant 2.25V/Cell)
After 50% Discharge
After 100% Discharge
Charging Current
20 24 28 32 36 40
Discharge Time Charging Time (Hours)
Temperature Effects in Relation to Battery Capacity
120
100
80
60
40
20
0
Self Discharge Characteristics
100
80
60
40
20
-20 -10 0 10 20 30 40 50 0
0 2 4 6 8 10 12
Temperature(°C)
Effect of Temperature on Long-Term Float Life 10
8 6 5
4 Charging Voltage 2.25 V/Cell
3
2
1
A
B
C
Storage Time (Months)
No supplementary charge required (Carry out supplementary charge before use if 100% capacity is required.)
Supplementary charge required before use.Optional charging way as below: 1.Charged for above 3 days at limted current 0.25CA and constant volatge 2.25V/cell. 2.Charged for above 20hours at limted current 0.25CA and constant volatge 2.45V/cell. 3.Charged for 8~10hours at limted current 0.05CA .
Supplementary charge may often fail to recover the capacity. The battery should never be left standing till this is reached
0.5 20 68
30 40 86 104
50 °C 122 °F
Battery Temperature
Charging
Cycle Applications: Limit initial current to less than 1.8A. Charge until battery voltage (under charge) reaches 14.4 to 14.7 volts at 68°F (20°C). Hold at 14.4 to 14.7
volts until current drops to under 60mA. Battery is fully charged under these conditions, and charger should be disconnected or switched to “float” voltage.
“Float” or “Stand-By” Service: Hold battery across constant voltage source of 13.5 to 13.8 volts continuously. When held at this voltage, the battery will seek its own
current level and maintain itself in a fully charged condition.
Note: Due to the self-discharge characteristics of this type of battery, it is imperative that they be charged within 6 months of storage, otherwise permanent loss of
capacity might occur as a result of sulfation.
Brisbane, QLD 4207
10°C A
B
40°C 30°C
C
25°C
Ca
pacity R
atio (
%)
Life E
xp
ecta
ncy (
Yea
r)
Te
rmin
al V
olta
ge (
V)
Re
main
ing C
ap
acity (
%)
1.2 4A 0.56A 0.3A
6A 3.
2.
77A
4A
1 8A 12A
0.05CA 0.10CA 0.20CA
1.0CA 2.0CA 3.0CA
© 2015. Power-Sonic Corporation. All rights reserved. All trademarks are the property of their respective owners. 0810 1M