Protektive Pak Product Line 6/20/05 ©Copyright 2005 DESCO INDUSTRIES INC

Protektive Pak Product Line

Protektive Pak Product Line

6/20/05 ©Copyright 2005 DESCO INDUSTRIES INC.

Protektive Pak Corrugated Material

Protektive Pak Corrugated Material

• Impregnated corrugated material; greater durability than coated or printed material

• Static dissipative surface of 107 - 109 ohms

• Buried shielding layer, minimizes sloughing and rub-off contamination

• Made from 100% recycled material, and is 100% recyclable

• Reusable, ensuring best value

In-Plant HandlersIn-Plant Handlers

• Many sizes available for optimal fit of your circuit boards

• Constructed with double sides, triple ends, and double thickness bottom for greater durability

• No tooling costs. Easy assembly without the need for tape, glue, or staples

• Used for the transportation or storage of ESD sensitive PCBs.• Provides ESD and physical protection for ESD sensitive circuit boards

Storage ContainersStorage Containers• Where the transporting or storing of PCB’s is a

necessity• Provides ESD and physical protection for ESD

sensitive components and devices

• Available options include: (1) Lid; (2) Steel reinforcing frame; (3) Conductive handles; (4) Static dissipative bottom foam pad

• Constructed with double sides, triple ends, and double thickness bottom for greater durability.

• No tooling costs. Easy assembly

Nesting TotesNesting Totes• On the bench top, assembly areas, store rooms, tool cribs.• Used to transport or store ESD sensitive items

• When operators carry the totes, conductive handles provide path to ground

• Stacking Nesting totes have easy-to-rotate steel arms for stacking; saves valuable space

• Stacking Nesting totes have added durability and strength provided by steel perimeter frame

• No assembly required on most sizes

• Storage rooms, tool cribs, bench tops.• Economical method of storing static sensitive electronic

devices

• Wide choice of sizes

• Shipped knocked-down; easy to assemble

Open Bin boxesOpen Bin boxes

• Anyone using SMT components.• Economical method of storing reels

• Containers include conductive plastic handles and removable lids

• Constructed with double sides and ends for greater durability

• Conductive plastic indexing ribs prevent the reels from rolling around when stored

• When cover is closed, the “Faraday Cage” effect restricts electrostatic charges to exterior of box

Reel Storage ContainersReel Storage Containers

• Economical and efficient way to store and transport DIP Tubes and Rails

• Each cell has an extender tab which may be labeled to identify the contents

• Tube Handler may be rotated on shelves to view the extender tube either vertically or horizontally

• Cell identification labels included


ESD Tube HandlersESD Tube Handlers

• Designed to safely store both reels and Rail/DIP tubes in the same bin box

• Available in open style with better loading from the top

• Available in closed style with better loading from the front

• May be used for storing, kitting, or transporting during work-in-process operations


Reel/DIP Tube Bin BoxesReel/DIP Tube Bin Boxes

• Workbench, rework areas.• Multi-sized drawers are designed for segregating ESD

sensitive components

• Used for kitting or storing items at the workstation

• When drawers are closed, items are shielded by “Faraday Cage” effect

• Containers include conductive plastic handles

• No assembly required

• Labels for drawers are included

Tek-CabinetsTek-Cabinets

• Shipping departments, distributors of components, contract manufacturers.

• Efficient means of shipping or storing small ESD sensitive items

• Provides ESD shielding with lid closed

• For physical protection; foam cushioning reduces stress from physical shock

• Pink static dissipative foam laminated to top, and conductive crosslink black polyethylene foam in bottom

Small Component ShippersSmall Component Shippers

• Anyone who needs to ship boards Efficient means of shipping or storing small sensitive circuit

boards and other items

Provides ESD shielding with lid closed

For physical protection, convoluted egg crate shape foam secures items

Many sizes available

Convoluted static dissipative <1011 ohms polyurethane pink foam laminated to top and loose in bottom

Circuit Board ShippersCircuit Board Shippers

• Assembly areas, benchtops, carts, shelves or anywhere the transporting of ESD sensitive PCB’s or components is done.

• Portable ESD worksurface that can also be used to transport populated but unsoldered circuit boards

• Static dissipative foam (RTT 106 - 107 ohms) laminated to Protektive Pak® corrugate

• Foam is shuntable so board leads can be kept at equipotential

• Includes 10mm (3/8") male or female grounding snap

• Impregnated corrugated material

• Static dissipative material 107 - 109 ohms

• Buried shielding layer

Tek Mate Board HandlersTek Mate Board Handlers

• Anyone who uses bench mats, carts or storage areas.• Economical ESD worksurface, particularly where subjected to soldering

and harsh chemicals

• Antistatic, low charging dissipative surface

• Includes two 10 mm (3/8") male grounding or female grounding snaps

• Chemical resistant

• Great choice for shelves and transportation carts

• Impregnated corrugated material

• Static dissipative surface of 107 - 109 ohms

• Buried shielding layer minimizes sloughing and rub-off contamination

Pro MatPro Mat

• Conductive 102 - 104 ohm material provides reliable path-to-ground

• Superior strength and durability; made from extruded, high impact polypropylene materials

• Chemical and moisture resistant

• Ideal for use where corrugated and/or paper products cannot be used

• Economical alternative to injection molded products

• Reusable, ensuring best value*Made in America

Protektive Pak Plastek™ Material


• In-Plant Handlers

• Storage Containers

• Tek Trays

• Open Bin Boxes

• Nesting Totes

• Stackable Nesting Totes



• Manufacturing floor, rework, R&D, anyone who has an ESD control program in place. • Economical ESD protective product to replace high charging plastic trash cans

• Antistatic, low charging dissipative surface

• Constructed with double sides, triple ends, and double thickness bottom for greater durability

• Steel reinforcing frame provides additional strength and durability

• Conductive plastic handles provide ease of handling and reliable ESD control path-to-ground

• ESD protective liners also available

Protektive Pak Trash Receptacles

Protektive Pak Trash Receptacles

Protektive Pak TapeProtektive Pak TapeWescorp Tape

• Anti-static, low tribocharging so will not damage ESD susceptible electronic components.

• Rubber based adhesive absorbs moisture.

• Temperature range of 50°F to 122°F

• Adhesive surface resistivity 1010 ohms.

Protektive Pak TapeProtektive Pak TapeCarton Sealing Tape

• Identifies packages that should be opened only in ESD protected areas

• For use in shipping of ESD sensitive items• Includes ESD Susceptibility symbol• 3” x 450’ Non-Asphaltic Reinforced Tape• Packaged 10 rolls per case• Made in America

Labels

Protektive Pak LabelsProtektive Pak Labels

ESDS assemblies and equipment containing ESDS parts and assemblies should be marked with an ESD susceptibility symbol, located in a position readily visible to personnel, and be located in a position readily visible when an ESDS assembly is incorporated into its next higher assembly.

Richmond 4150 Metal In Shielding Bags

Protektive Pak BagProtektive Pak Bag

• General use ESD shielding bag.

• Bag contents will not electrostaticically charge during movement.

• Allows for easy identification of bag contents.• Can be used multiple times.

Richmond 8300 Metal Out Shielding Bags • High performance abrasion coating on metal outer layer.

• Provides fast charge dissipation.• Bag contents will not

electrostaticically charge during movement.


Richmond 3750 ESD Moisture Barrier Bags

• Protects contents from ESD, moisture, and EMI/RFI interference.

• Integral static dissipative properties. Not topically treated, not humidity dependent, won’t wear off.


Genuine Pink Poly Bags• Strong and durable. Good for applications requiring a

tougher bag.• Low cost.• Antistatic polyethylene. Non tribocharging. Ideal for hardware or non-ESD assemblies.


Conductive Poly Bags

• Carbon impregnated polyolefin. Opaque, volume conductive.

• Easily grounded. • Advantage over Pink Poly is that electrical characteristics are not affected by age or humidity.


Conductive Hinged Boxes with Foam• Ideal for shipping and long term storage of ESD sensitive devices.• RTT <1 x 105 ohms -

electrostatic charges able to be removed when grounded• Secure snap closure keeps boxes from accidentally opening• Conductive foam inserts• Seven sizes available

New Protektive Pak ItemNew Protektive Pak Item

Dissipative Card Holder

• For use on bin boxes, material handling, and

storage containers• Dissipative 6 mil clear polycarbonate film• Full adhesive back with peel-off liner• Packaged 100 items/pack• Printed with ESD susceptibility symbol


Lead-Free Label

• Provides identification for packaging that contains lead-free products

• Colorful tie-in with other lead-free work area products• Label is 2” in diameter• 100 labels per package•


Who Uses Protektive Pak Products

Who Uses Protektive Pak Products

• Electronic Manufacturers• Contract Manufacturers• Component Distributors• R&D• Repair Facility

Industries For Protektive Pak

Industries For Protektive Pak

• Electronics • Aerospace• Medical• OEM• Military

How To Measure A Circuit Board

How To Measure A Circuit Board

• Width is the dimension of the PCB as it fits top to bottom in the box.

• Length is the dimension of the PCB as it fits left to right in the box.

• Thickness is the dimension of the PCB as it fits between the cells in the box.

• Be aware of any component that extends past the board. Extended parts could be damaged when loaded into a cell.

www.protektivepak.com/pdf/MeasureBox.pdfClick link to learn more:

http://www.protektivepak.com/pdf/MeasureBox.pdf








http://www.toolup.com/productInfoxaxIDxbxY130-ToolupxcxManxbxStarrett.html

• No broken bundle charge.• All orders are dropped shipped.

Protektive Pak OrdersProtektive Pak Orders

• Are the dimensions inside dimensions (I.D.) or outside dimensions (O.D.)?• Is the box a conductive box? It needs to be if it isn’t. Some people think they just need

conductive partitions to give them ESD protection. They need a faraday cage. Partitions only are not sufficient unless they are using shielding bags.

• Single or double thickness partitions? Our stock partitions are double thickness. • How many short dividers and how many long dividers?

Try to confirm the “cell-size” that the end user is trying to have. Also, try to get the size of their circuit board to offer them a stock box as an alternative. We always try to sell the stock box whenever possible.

What to Ask When the Customer Needs Partitions for their Boxes

What to Ask When the Customer Needs Partitions for their Boxes

Custom OrdersCustom Orders• All custom orders will be handled by Product Manager

Allan Claude: (909) 902-9370 .• Use our Tek Search feature on our web site for closest

container size. Give us details as to what you are looking for on our Contact Us page. Quote will be sent within 24 hours. A sample can be generated within 24 hours.

• Minimum order is $750.• Non-recurring engineering charge May apply. • Prototype will be sent to the end user and a custom

number assigned.

http://www.protektivepak.com/main.asp?pageID=src

http://www.protektivepak.com/main.asp?pageID=src

http://www.protektivepak.com/main.asp?pageID=cu

Documents

Protektive Pak Product Line 6/20/05 ©Copyright 2005 DESCO INDUSTRIES INC